20-40X ZOOM MICROSCOPE CD Eyepiece 说明书
合集下载
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
shown by the arrow. 2. Remov e the used-up batteries and insert 3 pcs of fresh LR44 button cells into the battery compartment
in the right polarity. 3. Close the Battery Door and tighten the Battery Door Screw with a screwdriver.
5
® Specimen Slides Covers ® Specimen Slide
®
HOWTOUSE
Getting Ready Remove the Battery Insulate ( 5) by pulling it outward.
Observing with Specimen Stage (6) 1. Place the object of observation onto the
3. Slide the Focusing Lever (4) gradually until the image is clear and sharp.
BATTERY INSTALLATION
➔ ➔
>
>
Ifthe LED light becomes dim, it means that it's time to replace the batteries. 1. Unscrew the Battery Door Screw (8) w ith a screwdriver and remov e the Battery Door (7) in the direction
1. Place the microscope directly on top of the object of observation and press the LED On/Off Button and observe through the E yepiece.
2. Turn the Zoom W heel to adjust the desired degree ofmagnification {from 20X to 40X) .
20-40X ZOOM MICROS) Zoom Wheel
@ LED On/Off Button
@) Focusing Lever
® Battery Insulate
® Specimen Stage
(J) Battery Door
® Battery Door Screw
Specimen Slide (10) and place a Specimen Slide Cover (9) on top of the object. Insert the Specimen Slide into the Specimen Stage. 2. Place the Microscope into the Specimen Stage and press the LED On/Off Button (3) and observe through the Eyepiece ( 1) . 3. Turn the Zoom Wheel to adjust the desired degree of magnification ( from 20X to 40X) . 4. Slide the Focusing Lever (4) gradually until the image is clear and sharp. Observing without Specimen Stage
in the right polarity. 3. Close the Battery Door and tighten the Battery Door Screw with a screwdriver.
5
® Specimen Slides Covers ® Specimen Slide
®
HOWTOUSE
Getting Ready Remove the Battery Insulate ( 5) by pulling it outward.
Observing with Specimen Stage (6) 1. Place the object of observation onto the
3. Slide the Focusing Lever (4) gradually until the image is clear and sharp.
BATTERY INSTALLATION
➔ ➔
>
>
Ifthe LED light becomes dim, it means that it's time to replace the batteries. 1. Unscrew the Battery Door Screw (8) w ith a screwdriver and remov e the Battery Door (7) in the direction
1. Place the microscope directly on top of the object of observation and press the LED On/Off Button and observe through the E yepiece.
2. Turn the Zoom W heel to adjust the desired degree ofmagnification {from 20X to 40X) .
20-40X ZOOM MICROS) Zoom Wheel
@ LED On/Off Button
@) Focusing Lever
® Battery Insulate
® Specimen Stage
(J) Battery Door
® Battery Door Screw
Specimen Slide (10) and place a Specimen Slide Cover (9) on top of the object. Insert the Specimen Slide into the Specimen Stage. 2. Place the Microscope into the Specimen Stage and press the LED On/Off Button (3) and observe through the Eyepiece ( 1) . 3. Turn the Zoom Wheel to adjust the desired degree of magnification ( from 20X to 40X) . 4. Slide the Focusing Lever (4) gradually until the image is clear and sharp. Observing without Specimen Stage