Configuring Wireless on Mac OS X
Mac OS X for pc之菜鸟安装
Mac OS X for pc之菜鸟安装Mac OS X for pc之菜鸟安装自从Tiger出来后不久，就被高手破解了，用于安装在pc上，记得好像差不多有一年时间了，当时AMD的还不支持sse2指令集，所以只能安装在奔腾4上，奔腾5那时候还没有的。
某天，cc刘给了我一个bt地址，哈哈！全球下载呀！好像同时下的有几千人，2小时就下好了。
那时候，我在用850E的架构，马上体验，从安装到结束，大概1个多小时吧，装好后发现，硬件都不认，（关键是声卡不认，）忍了好几天，天天和哑巴机器打交道，实在不爽，想想以后还会升级的，到时候认了就好办了，实在是自己也没这个实力做驱动，所以放弃了。
去年底，Tiger又升级了，相应的破解又马上出来了，而且驱动支持得越来越多。
我又心动了，下了破解和原版cd，打算按部就班的做一个，结果……呵呵，失败！总结原因就是我用的是硬盘是scsi raid，（raid卡比较bt，windows xp 下的驱动至今都还没有，自己凑合了一个，）VMWare无法写入，所以又只好放弃了，不久以后，就有人做好破解版的光盘在流传了。
赶紧下，（唉！网络状态大不如前了，那段时间，正是网络服务商严打bt时期，那个慢呀！难以忍受！）刚下好Mac OS X10.4.3的，Mac OS X10.4.4的就来了……其实，我真正开始体验的还是Mac OS X10.4.5版的，（以下简称吧！打字真麻烦）。
自己做破解安装盘的教程外面已经很多了，这里不再赘述，本文只讲述破解版光盘安装的过程和一些安装完毕后的设置心得。
首先，先查看你的硬件，主要是cpu，用cpu|-z看一下，或者简单判断，只要你的cpu支持sse2就可以了，不管是intel还是amd 的都可以，具体的硬件支持，可以参考（/index.php/HCL），另外（/），这个网站是专门讨论Mac for pc的，建议多看看。
英文比较好的，可以直接到（/）看文章。
查到了自己的机器是不是能装就可以开始试试了，生命在于运动，反正用windows的也是天天打补丁，升级的。
D-Link DAP-3315 快速安装指南说明书
IMPORTANT INFORMATIONThis product should ONLY be installed by an experienced installer who is familiar with local building and safety codes and, wherer applicable, is licensed by the appropriate authorities. Failure to employ an experienced installer may render the D-Link product warranty void and may also expose the end user or the service provider to legal and financial liabilities. D-Link and its resellers or distributors expressly disclaim any and all liabilities for injury, damage, or violation of regulations due to the improper installation of outdoor units or antennas.A safety grounding system is necessary to protect your outdoor installation from lightning strikes and the build-up of static electricity. Direct grounding of an outdoor AP is very important and can protect your networks from brutal outdoor environments and devastating ESD attacks. The grounding system must comply with the National Electrical Code and safety standards that apply in your country and/or region. Always check with a qualified electrician if you are in doubt as to whether your outdoor installation is properly grounded.2 D-Link DAP-3315 Quick Install GuideD-Link DAP-3315 Quick Install Guide 3Quick Install GuideThis installation guide provides basic instructions for installing the DAP-3315 Wireless N Exterior Access Point 1 on your network. For additional information about how to use the Access Point, please see the datasheet and user manual from the D-Link support website.1T he DAP-3315 support the IPX5 water/dust-proof standard. It is recommended that you place the AP under a roof, shelter, or weather-proof container in severe weather environment.STEP 2: Mount the AP to a Pole or WallMinimum System RequirementsPackage Contents-Computer with Windows, MAC OS, or Linux-based operating system, and an Ethernet adapter installed-Internal Explore 11, Safari 7, Firefox 28, Google Chrome 33 or later versions of these browsers-DAP-3315 Wireless N Exterior Access Point -PoE Injector(24V/0.5A) -Pole Mount (Non-detachable) -Wall Mount-Two Plastic Mounting Ties -Grounding Wirecontact your reseller.Physical InstallationSTEP 1: Connect an Ethernet Cable 3 to the LAN (PoE) Port on the AP .3Ethernet cable is not included in the package4 D-Link DAP-3315 Quick Install GuideSTEP 4: Connect the AP to Your NetworkThis product uses a proprietary PoE design and can only be used with the included PoE injector.A. C onnect the Ethernet cable (connected to the AP in STEP 1) from the AP to the “POE” port on the PoE Injector.B. C onnect an Ethernet cable from a router/switch or PC to the “LAN” port on the PoE Injector.C. A ttach the power cord to the PoEInjector, and attach it into an electrical outlet.STEP 3: Connect Grounding Wire A grounding wire 4 is recommended to protect your device from lightning strikes and the buildup of static electricity.ConfigurationIf you are configuring the AP locally, connect a PC to the PoE Injector “DATA IN” port using an Ethernet cable.A. A ssign a static IP address to your PC which is in the same network segment with the device. As the default IP address of this unit is 192.168.0.50, you may choose any address from 192.168.0.1 to 192.168.0.254, except 192.168.0.50.B. O pen a web browser and go tohttp://192.168.0.50. Enter admin as your username and leave the password blank to log into the web UI. Now you can configure the AP via web UI.POWER INRouter or Switch ComputerAustralia:Tel: 1300-700-10024/7 Technical SupportWeb: .auE-mail:*****************.auIndia:Tel: +91-832-2856000 or 1860-233-3999 Web: www.dlink.co.inE-Mail:*****************.com Singapore, Thailand, Indonesia, Malaysia, Philippines, Vietnam: Singapore - .sgThailand - www.dlink.co.thIndonesia - www.dlink.co.idMalaysia - .myPhilippines - .phVietnam - .vnKorea:Tel : +82-2-2028-1810Monday to Friday 9:00am to 6:00pmWeb : http://d-link.co.krE-mail:*************.krNew Zealand:Tel: 0800-900-90024/7 Technical SupportWeb: E-mail:****************.nzSouth Africa and Sub Sahara Region:Tel: +27 12 661 202508600 DLINK (for South Africa only) Monday to Friday 8:30am to 9:00pm South Africa TimeWeb: http://www.d-link.co.zaE-mail:****************.com D-Link Middle East - Dubai, U.A.E. Plot No. S31102,Jebel Ali Free Zone South,P.O.Box 18224, Dubai, U.A.E.Tel: +971-4-8809022Fax: +971-4-8809066 / 8809069Technical Support: +971-4-8809033 GeneralInquiries:****************.com TechSupport:*******************.com Egypt1, Makram Ebeid Street -City Light Building - floor 5Nasrcity - Cairo, EgyptTel.: +2 02 23521593 - +2 02 23520852 Technical Support: +2 02 26738470 GeneralInquiries:****************.com TechSupport:*******************.com Kingdom of Saudi ArabiaOffice # 84 ,Al Khaleej Building ( Mujamathu Al-Khaleej) Opp. King Fahd Road, OlayaRiyadh - Saudi ArabiaTel: +966 1121 70008Technical Support:+966 1121 70009GeneralInquiries:****************.com TechSupport:*******************.com PakistanIslamabad Office:61-A, Jinnah Avenue, Blue Area,Suite # 11, EBC, Saudi Pak Tower, Islamabad - PakistanTel.: +92-51-2800397, 2800398Fax: +92-51-2800399Karachi Office:D-147/1, KDA Scheme # 1,Opposite Mudassir Park, Karsaz Road, Karachi – PakistanPhone: +92-21-34548158, 34326649Fax: +92-21-4375727Technical Support: +92-21-34548310, 34305069 GeneralInquiries:****************.com TechSupport:*******************.comTECHNICAL SUPPORTYou can find software updates and user documentation on the D-Link website.Tech Support for customers inD-Link DAP-3315 Quick Install Guide 5TECHNICAL SUPPORT MoroccoM.I.T.CRoute de Nouaceur angle RS et CT 1029 Bureau N° 312 ET 337Casablanca , MarocPhone : +212 663 72 73 24Email:*******************.com Lebanon RMA centerDbayeh/LebanonPO Box:901589Tel: +961 4 54 49 71 Ext:14Fax: +961 4 54 49 71 Ext:12Email:**************.comBahrainTechnical Support: +973 1 3332904 Kuwait:Technical Support: + 965 22453939 / +965 224539496 D-Link DAP-3315 Quick Install GuideВАЖНАЯ ИНФОРМАЦИЯУстановку данного устройства следует проводить ТОЛЬКО квалифицированномуспециалисту, который знаком с местными строительными нормами и правиламитехники безопасности и лицензирован соответствующими органами. Невыполнениеэтого условия может привести к аннулированию гарантии на устройство D-Link ипривлечению конечного пользователя или поставщика услуг к финансово-правовойответственности. Компания D-Link и ее поставщики или дистрибьюторы не несутответственности за ущерб, повреждение или нарушение нормативных требований,связанных с установкой оборудования для наружного использования или антенн.Система защитного заземления необходима для обеспечения защитыустановленного вне помещения оборудования от повреждения разрядом молниии предотвращения накопления статического электричества. Прямое заземлениевнешней точки доступа очень важно и может защитить Вашу сеть от экстремальныхпогодных условий и повреждения электростатическим зарядом. Система заземления должна соответствовать Национальным электротехническим нормам и правилам (NEC) и стандартам безопасности, которые применяются в Вашей стране.Проконсультируйтесь с квалифицированным электриком, если у Вас возникаютсомнения относительно правильности заземления установленного вне помещенияоборудования.D-Link DAP-3315 Quick Install Guide 78 D-Link DAP-3315 Quick Install GuideКраткое руководство по установкеРуководство по установке содержитосновные инструкции по установке в сети внешней беспроводной 802.11n точки доступа DAP-3315. За дополнительной информацией по использованию точки доступа, пожалуйста, обратитесь к техническому описанию и руководству пользователя на Web-сайте технической поддержки D-Link.ШАГ 2: Прикрепите ТД к столбу или стене2A: Крепление к столбуМинимальные системные требованияКомплект поставки-Компьютер с ОС Windows, MAC OS или ОС на основе Linux и установленным Ethernet-адаптером-Internet Explorer 11, Mozilla Firefox ® версия 28, Safari 7, Chrome 33 или выше-Внешняя беспроводная 802.11n точка доступа DAP-3315 -PoE-инжектор(24 V/0,5 А) -Крепление к столбу (Несъемное) -Крепление к стене-Две пластиковые скобы для крепленияЕсли что-либо из перечисленного отсутствует, пожалуйста, обратитесь к поставщику.Аппаратная установкаШАГ 1: Подключите Ethernet-кабель3 к порту LAN (PoE) на ТД.3Ethernet-кабель не входит в комплект поставки.D-Link DAP-3315 Quick Install Guide 9ШАГ 4: Подключите ТД к сетиЭтот продукт использует проприетарный дизайн PoE и может использоваться только с инжектором PoE в упаковке.A. Подключите Ethernet-кабель(подключенный к ТД на шаге 1) от ТД к порту “POE” на PoE-инжекторе.B. Подключите Ethernet-кабель от маршрутизатора/коммутатора или компьютера к порту “LAN” на PoE-инжекторе.C. Прикрепите шнур питания к инжектору PoE и прикрепите его к Электрическая розетка.ШАГ 3: Подключите заземляющий проводИспользование заземляющего провода4рекомендуется для защиты устройства от ударов молнии и накопления электрических зарядов.НастройкаЕсли настройка ТД выполняется локально, подключите компьютер к порту “DATA IN” на PoE-инжекторе, используя Ethernet-кабель.А. Назначьте статический IP-адрескомпьютеру, который находится в том же сегменте сети, что и устройство. Т.к. IP-адресом данного устройства является 192.168.0.50, можно выбрать любой адрес от 192.168.0.1 до 192.168.0.254, за исключением 192.168.0.50.B. Откройте Web-браузер и перейдите на http://192.168.0.50. Введите admin в качестве имени пользователя и оставьте пароль незаполненным, чтобы войти в Web-интерфейс пользователя. Теперь можно настроить ТД через Web-интерфейс пользователя.POWER INМаршрутизатор или коммутаторКомпьютер10 D-Link DAP-3315 Quick Install GuideТЕХНИЧЕСКАЯ ПОДДЕРЖКАОФИСЫОбновления программного обеспечения и документация доступны на Интернет-сайте D-Link.D-Link предоставляет бесплатную поддержку для клиентов в течение гарантийного срока.Клиенты могут обратиться в группу технической поддержки D-Link по телефону или через Интернет.Техническая поддержка компании D-Link работает в круглосуточном режиме ежедневно, кроме официальных праздничных дней. Звонок бесплатный по всей России.Техническая поддержка D-Link:8-800-700-5465Техническая поддержка через Интернет:http://www.dlink.rue-mail:****************Изготовитель:Д-Линк Корпорейшн, 114, Тайвань, Тайпей, Нэйху Дистрикт, Шинху 3-Роуд, № 289Уполномоченный представитель, импортер:ООО “Д-Линк Трейд”390043, г. Рязань, пр. Шабулина, д.16 Тел.: +7 (4912) 503-505РоссияМосква, Графский переулок, 14Тел. : +7 (495) 744-00-99E-mail:*************УкраїнаКиїв, вул. Межигірська, 87-АТел.: +38 (044) 545-64-40E-mail:***********MoldovaChisinau; str.C.Negruzzi-8Tel: +373 (22) 80-81-07E-mail:*************БеларусьМінск, пр-т Незалежнасці, 169Тэл.: +375 (17) 218-13-65E-mail:****************ҚазақстанАлматы, Құрманғазы к-cі,143 үйТел.: +7 (727) 378-55-90E-mail:***************ՀայաստանԵրևան, Դավթաշեն 3-րդթաղամաս, 23/5Հեռ.՝ +374 (10) 39-86-67Էլ.փոստ՝*************LatvijaRīga, Lielirbes iela 27Tel.: +371 (6) 761-87-03E-mail:*************LietuvaVilnius, Žirmūnų 139-303Tel.: +370 (5) 236-36-29E-mail:*************EestiE-mail:*************TürkiyeUphill Towers Residence A/99Ataşehir /ISTANBUL Tel: +90 (216) 492-99-99Email:*****************.trלארשי20 םימישגמה 'חרןולטמ תירקהווקת חתפ072-2575555****************.ilINFORMACIÓN IMPORTANTEEste producto sólo debe ser instalado por un técnico con experiencia que esté familiarizado con los códigos locales de construcción y seguridad donde sea aplicable y autorizado por las autoridades competentes. El no hacerlo puede anular la garantía del producto D-Link y puede exponer al usuario final o al proveedor de servicios a asumir responsabilidades legales y financieras. D-Link y sus revendedores o distribuidores no se hacen responsables por lesiones, daños o violación de las regulaciones asociadas con la instalación de unidades de exteriores o antenas.Un sistema de conexión a tierra de seguridad es necesario para proteger su instalación en el exterior de los rayos y la acumulación de electricidad estática. Un cable directo a tierra en un AP de exterior es muy importante y puede proteger sus redes frente a entornos exteriores brutales y ataques ESD devastadores. El sistema de puesta a tierra debe cumplir con el Código Eléctrico Nacional y las normas de seguridad que se aplican en su país. Siempre consulte con un electricista calificado si tiene dudas sobre si su instalación en el exterior está conectada a tierra correctamente.Guía de Instalación RápidaEsta guía de instalación proporcionainstrucciones básicas para instalar el Access Point 1 Wireless N DAP-3315 de Exterior en la red. Para obtener información adicional acerca de cómo utilizar el punto de acceso, consulte el datasheet y el manual de usuario desde el sitio web de soporte de D-Link.1E l Access Point DAP-3315 soporta el estándar IPX5 a prueba de agua/polvo. Se recomienda colocar el AP bajo un techo, cubierto, o en un contenedor a prueba de cambios climáticos severos.PASO 2: Montar AP a un Poste o a una Pared2A: Montaje en PosteRequisitos Mínimos del SistemaContenido del Empaque-Computador sistema operativo, conWindows, Mac OS o Linux y un adaptador Ethernet instalado-Internet Explorer 11, Mozilla Firefox ® versión 28, Safari 7 o Chrome 33 o superior-Access Point Wireless N DAP-3315 de Exterior-Inyector PoE(24V/0.5A)-Montaje en poste (no desmontable) -Montaje en pared-Dos lazos de plástico de montaje -Fio de aterramentopor favor contáctese con su distribuidor.Instalación FísicaPASO 1: Conecte un Cable Ethernet 3 al Puerto LAN (PoE) de AP .3Cable Ethernet no está incluido en el empaque.ESPAÑOLPASO 4: Conecte el Punto de Acceso a la RedEste producto usa un diseño patentado de PoE. Solo se puede usar con el inyector PoE en el paquete.A. C onecte el cable Ethernet (conectado al AP en el PASO 1) desde el AP al puerto "POE" en el inyector PoE.B. C onecte un cable Ethernet desde el router / switch o PC al puerto "LAN" en el inyector PoE.C. C onecte el cable de alimentación al inyector PoE y conecte a una toma de corriente.PASO 3: Conecte a TierraUn cable a tierra 4 se recomienda para proteger su dispositivo contra la caída de rayos y la acumulación de electricidad estática.ConfiguraciónSi va a configurar el punto de acceso a nivel local, conecte un PC al inyector PoE en el puerto "DATA IN" utilizando un cable Ethernet.A. A signe una dirección IP estática a su PC que está en el mismo segmento de red con el dispositivo. La dirección IP por defecto de esta unidad es 192.168.0.50, usted puede elegir cualquier dirección de 192.168.0.1 a 192.168.0.254, excepto 192.168.0.50.B. A bra un navegador Web y vaya a http://192.168.0.50. Introduzca admin como nombre de usuario y deje lacontraseña en blanco para iniciar sesión en la interfaz de usuario web. Ahora puede configurar el punto de acceso a través de la interfaz de usuario web.POWER INRouter o Switch ComputadorSOPORTE TÉCNICOUsted puede encontrar actualizaciones de softwares o firmwares y documentación para usuarios a través de nuestro sitio SOPORTE TÉCNICO PARA USUARIOS EN LATINO AMERICAPor favor revise el número telefónico del Call Center de su país en/soporte/call-centerSoporte Técnico de D-Link a través de InternetHorario de atención Soporte Técnico en e-mail:*******************&*********************Por favor asegúrese de que los canales 36/40/44/48 en la banda de 5 GHz estén sin licencia y sin restricciones de uso en su país de residencia antes de utilizarlos. Cualquier uso ilegal de estos canales es responsabilidad del usuario.INFORMAÇÕES IMPORTANTESEste produto só deve ser instalado por um instalador experiente que está familiarizado com a construção local e códigos de segurança e, onde quer que for o caso, é licenciada pelas autoridades competentes. Não fazer isso pode anular a garantia do produto D-Link e pode expor o usuário final ou o prestador de serviços de responsabilidades legais e financeiras. D-Link e seus revendedores ou distribuidores não são responsáveis porlesões, danos ou violação de regulamentos relacionados com a instalação de unidades exteriores ou antenas.Um sistema de aterramento de segurança é necessário para proteger a sua instalação ao ar livre de raios e o acúmulo de eletricidade estática. Direto aterramento AP ao ar livre é muito importante e pode proteger as suas redes de ambientes ao ar livre e brutais ataques devastadores ESD. O sistema de aterramento deve estar de acordo com o CódigoElétrico Nacional e normas de segurança em vigor no seu país. Sempre verifique com um eletricista qualificado se você estiver em dúvida sobre se a sua instalação no exterior está devidamente fundamentada.Guia de Instalação RápidaEsse guia de instalação fornece instruções básicas para instalar o Access Point Wireless N Externo DAP-3315 na sua rede. Para informações adicionais sobre como utilizar o Access Point, consulte a folha de dados e o manual do usuário no website de suporte da D-Link.1O DAP-3315 suporta o padrão IPX5 à prova d’água/de poeira. Recomendamos que você coloque o AP sob uma cobertura, abrigo ou recipiente à prova de intempéries em ambientes meteorológicos adversos.ETAPA 2: Monte o AP em um poste ou parede2A: Montagem em posteRequisitos mínimos do sistema Conteúdo da embalagem-Computador com Windows, MAC OS, ou sistema operacional baseado em Linux e um adaptador Ethernet instalado-Internet Explorer 11, Mozilla Firefox ® versão 28, Safari 7, ou Chrome 33 ou superior-Acess Point Wireless N Externo DAP-3315 -Injetor PoE(24V/0.5A)-Montagem em poste (não removível) -Montagem na parede-Dois tirantes de plástico para montagem -Cable a tierrafavor contatar o seu revendedor.Instalação físicaETAPA 1: Conecte um cabo Ethernet 3 na porta LAN (PoE) no AP .3O cabo Ethernet não está incluído no pacote.PORTUGUÊSETAPA 4: Conecte o AP à sua RedeEste produto utiliza um design proprietário PoE e só pode ser usado com o injetor PoE incluído.A. C onecte o cabo Ethernet (ligado ao AP na ETAPA 1) do AP para a porta “POE” do Injetor PoE.B. C onecte um cabo Ethernet de umroteador/switch ou PC na porta “LAN” no Injetor PoE.C. C onecte o cabo de alimentação ao injetor PoE e conecte-o a uma tomada.ETAPA 3: Conecte o cabo de aterramentoUm cabo de aterramento 4é necessário para proteger o seu dispositivo contra raios e formação de eletricidade estática.ConfiguraçãoSe você estiver configurando o APlocalmente, conecte um PC à porta “DATA IN” do Injetor PoE utilizando um cabo Ethernet.A. A tribua um endereço IP estático ao seu PC, que está no mesmo segmento de rede do dispositivo. Como o endereço IP padrão dessa unidade é 192.168.0.50, você pode escolher qualquer endereço de 192.168.0.1 a 192.168.0.254, exceto 192.168.0.50.B. A bra um navegador web e vá parahttp://192.168.0.50. Digite admin como o seu nome de usuário (username) e deixe a senha em branco para efetuar o login na interface de usuário web. Agora você pode configurar o AP utilizado a interface de usuário web.POWER INRoteador ou SwitchComputadorSUPORTE TÉCNICOCaso tenha dúvidas na instalação do produto, entre em contato com o Suporte Técnico D-Link. Acesse o site: .br/suporte重要資訊本產品應僅限熟悉當地環境、安全法規、具有合法執照且有經驗的人員來進行安裝。
解决Mac电脑上的WiFi连接问题的方法
解决Mac电脑上的WiFi连接问题的方法在Mac电脑上遇到WiFi连接问题是很常见的情况。
这些问题可能导致无法连接到WiFi网络、网络速度缓慢或频繁掉线等不便。
幸运的是，有几种简单而有效的方法可以解决这些问题。
本文将指导您如何解决Mac电脑上的WiFi连接问题。
第一步：检查WiFi连接首先，检查您的WiFi连接是否正常工作。
您可以通过以下方法进行检查：1. 查看WiFi图标：在屏幕右上方，您会看到一个WiFi图标。
确保该图标显示为“已连接”状态。
如果显示为“未连接”或带有一个感叹号，表示您的WiFi连接存在问题。
2. 检查WiFi设置：点击WiFi图标，然后选择“打开网络偏好设置”。
确保WiFi已打开，并选择您要连接的WiFi网络。
如果网络列表中没有您的WiFi网络，请尝试刷新网络列表或手动输入WiFi名称和密码。
3. 重新启动WiFi路由器：如果您的WiFi网络仍然无法连接，请尝试重新启动WiFi路由器。
通常，您可以通过拔下电源线，等待几秒钟，然后再重新插入电源线来完成此操作。
第二步：重置网络设置如果WiFi连接问题仍然存在，您可以尝试重置网络设置。
请注意，这将删除您保存的WiFi密码、VPN设置和其他网络相关的设置。
执行以下步骤：1. 打开“系统偏好设置”：点击屏幕左上角的苹果图标，然后选择“系统偏好设置”。
2. 进入“网络”选项：在系统偏好设置窗口中，选择“网络”。
在左侧的网络列表中选择“WiFi”。
3. 重置网络设置：点击右下方的“高级”按钮，然后选择“TCP/IP”选项卡。
在底部找到“使用DHCP客户端ID”和“配置IPv6”复选框，并确保两者都取消勾选。
然后，点击“确定”保存更改。
4. 重新连接WiFi网络：回到“网络”选项卡，点击左下角的“应用”按钮应用更改。
然后选择您要连接的WiFi网络，并输入密码进行连接。
第三步：删除系统首选项文件在某些情况下，WiFi连接问题可能是由系统首选项文件的损坏导致的。
Mac OS X 10.5：如何配置 802.1X 的网络偏好设置
Mac OS X 10.5：如何配置802.1X 的网络偏好设置∙上次修改时间: 15 一月, 2010∙文章: HT3326摘要802.1X 标准设计用于通过防止未经授权的设备访问网络，来增强局域网的安全性。
该标准支持多种鉴定方法，包括TLS、EAP–FAST、TTLS、LEAP、MD5 和PEAP（MSCHAPv2、MD5、GTC）。
如果您身处教育或商业环境，就可能需要连接受802.1X 标准保护的无线(IEEE 802.11) 或以太网(IEEE 802.3) 网络。
在受802.1X 保护的环境中，电脑在通过鉴定后才能访问网络服务（例如，电子邮件或Internet）。
受影响的产品AirPort, Mac OS X 10.5在配置Mac OS X 中的802.1X 设置之前，可能需要先了解下列信息。
▪用户名▪密码▪无线网络名称（区分大小写）▪鉴定方法和选项▪如果使用的是TLS，还需要有用户证书/专用密钥对，这通常以 .p12 文件(PKCS12) 形式提供。
在此情况下，应让IT 部门来为您配置电脑。
如果不是很清楚，请询问网络管理员来了解配置802.1X 时要知道上述哪些信息。
我应该使用哪个802.1X 描述文件？―网络‖偏好设置中共有三个802.1X 描述文件选项：▪用户描述文件▪登录窗口描述文件▪系统描述文件注：负责电脑鉴定的802.1X RADIUS 服务器并不知道您所使用的802.1X 描述文件类型。
用户、登录窗口和系统描述文件对RADIUS 服务器是透明的，而且是Mac OS X 所特有的。
不论使用的是何种描述文件，电脑和RADIUS 服务器之间所进行的处理都是相同的。
需要注意的是，802.1X 描述文件存在一个优先顺序。
如果有多种描述文件类型，则系统描述文件优先于登录窗口描述文件，而后者又优先于用户描述文件。
如果已在所在位置配置了系统描述文件，则请勿向相同位置添加用户描述文件或登录窗口描述文件。
Throughput Test Help Documentation说明书
dfTamoSoft ® Throughput Test Help Documentation Version 1.0Copyright © 2011-2016 TamoSoftContentsContents (2)Introduction (3)Overview (3)System Requirements (3)Installation and Configuration (4)Installation (4)Configuring the Server (4)Configuring the Client (5)Performing the Tests (6)QoS Testing (8)Understanding Your Results (10)Throughput (10)Packet Loss (10)Round-Trip Time (10)Frequently Asked Questions (11)Other Network Analysis Software (12)IntroductionOverviewTamoSoft Throughput Test is a utility for testing the performance of a wireless or wired network. This utility continuously sends TCP and UDP data streams across your network and computes important metrics, such as upstream and downstream throughput values, packet loss, and round-trip time, and displays the results in both numeric and chart formats. TamoSoft Throughput Test supports both IPv4 and IPv6 connections and allows the user to evaluate network performance depending on the Quality of Service (QoS) settings.TamoSoft Throughput Test is free software. It is brought to you by TamoSoft, a software company that develops cutting-edge network monitoring and analysis software for the Internet, LANs, and WLANs, providing clients with the ability and confidence to meet the challenges of tomorrow's technology. System RequirementsTamoSoft Throughput Test can run on computers with the following minimal system requirements: ▪Microsoft Windows: Windows 7, Windows 8, Windows 8.1, Windows 10, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2. Mac OS X: Mavericks(10.9), Yosemite (10.10), El Capitan (10.11), Sierra (10.12). Android (client only): Android 4.1 andnewer.▪ 1 GB of RAM.▪ 5 MB of free disk space.Installation and ConfigurationTo perform a throughput test, the application uses two components: a server and a client. The server part of the application listens for connections from the client, and the client connects to the server. Once the connection has been established, the client and server send data in both directions, and the client part of the application computes and displays the network metrics.InstallationWhen you install the application, both the server and client components are installed. You can then run either one, depending on how you plan to perform the tests. In a WLAN, the server part should be run on the wired side of the network, while the client part should be run on a WLAN client. In this type of a setup, "downstream" would be the data flow from the wired side of the network through the access point to the client, and "upstream" would be the data flow from the client through the access point to the wired side.While this application is intended primarily for testing Wi-Fi network throughput, you can also use it to test wired networks. If you test wired LANs, it's not important which of the two computers acts as a server and which one acts as a client.Configuring the ServerThe server part of the application has only two configurable options: the port on which it listens for incoming connections and the network protocol to be used (IP, also known as IPv4, or IPv6). By default, the server listens on port 27100 and uses IPv4, as shown below:If you want to change the port number or the protocol type, simply make the corresponding changes and click Apply:Configuring the ClientIn the client component, you only need to specify the port number to be used for connecting to the server (if you changed the default port number 27100 on the server side).IMPORTANT: This application automatically creates a Windows firewall rule that allows it to accept connections. If you use a third party firewall, be sure to configure it to allow incoming connections for this application. Both UDP and TCP connections must be allowed.Performing the TestsTo begin throughput testing, you need to launch both the client and server on different computers, as described in the previous chapter. In the client window, enter the IPv4 or IPv6 address of the server and click Connect. The client will attempt to connect to the server, and if the connection is successful, continuous throughput testing will commence. This will continue until you click Disconnect.The client window displays TCP and UDP upstream and downstream throughput values (both current and averaged), loss percentage for UDP streams, and the round-trip time. The same data are illustrated by a dynamically updated chart. The chart can display Throughput, Loss, or RTT values, depending on your selection. Note that the application uses Mbps, i.e. Megabits per second(not Megabytes!) as the measurement unit. Right-clicking on the chart allows you to clear the chart data, copy the chart, save it as a PNG file, or toggle the 3D view on and off. The status log window at the bottom displays messages about the current application status. If you would like to perform TCP tests only, without UDP, check the TCP only box.On Android devices, the interface is organized slightly differently. The first application screen is used for specifying the server IP address and port, while the second screen displays the charts, as shown below:to toggle the 3D view on and off.QoS TestingAdvanced users might want to use the QoS traffic type control to specify the Quality of Service traffic type that will be associated with the TCP and UDP data streams that are sent and received by the application.A description of the use of QoS and related standards and technologies, such as WMM, 802.11e, DSCP, and 802.11p, is beyond the scope of this manual, but in brief, there are two reasons why you may want to use this functionality:▪To check how different QoS traffic types affect throughput. In a properly designed WLAN that uses enterprise-class APs, throughput values for high-priority traffic should exceed those for normal-priority traffic.▪To verify end-to-end QoS network design. In a properly designed WLAN, QoS-tagged traffic must traverse the overall network from the source to the destination through wireless and wired segments with different technology and protocol implementations. When testing this scenario, you should use TamoSoft Throughput Test for generating QoS-tagged traffic, and use packet capture and analysis tools, such as CommView and CommView for WiFi (for wired and wireless LANs, respectively,) to inspect the packets and verify the QoS or DSCP values in the packets. The table below summarizes different QoS traffic types that you can use. Please pay attention to the fact that not all the QoS types available in the application and described below have corresponding WMM access categories. In practice, this means that when you run a TamoSoft Throughput Test on a WLAN client and select a QoS type that has no WMM mapping, your Wi-Fi adapter driver might fail to QoS-tag packets at all.Best Effort Flow traffic has the same network priority as regular traffic not associated withQoS.This traffic type is the same as not specifying priority, and as a result, the DSCPmark and 802.1p tag are not added to sent traffic. Corresponds to the WMMAC-BE access category. On Mac OS X, packets are tagged with Class SelectorCS0.Background Flow traffic has a network priority lower than that of Best Effort. This traffictype could be used for traffic of an application doing data backup.Sent traffic will contain a DSCP mark with a value of 0x08 and an 802.1p tagwith a value of 2. Corresponds to the WMM AC-BK access category. On Mac OSX, packets are tagged with Class Selector CS1.Excellent Effort Flow traffic has a network priority higher than Best Effort, yet lower than AudioVideo.This traffic type should be used for data traffic that is moreimportant than normal end-user scenarios, such as e-mail.Sent traffic will contain a DSCP mark with value of 0x28 and 802.1p tag with avalue of 5. This doesn't correspond to any WMM access category. On Mac OSX, packets are tagged with Class Selector CS2.AudioVideo Flow traffic has a network priority higher than Excellent Effort, yet lower thanVoice. This traffic type should be used for A/V streaming scenarios such asMPEG2 streaming.Sent traffic will contain a DSCP mark with a value of 0x28 and an 802.1p tagwith a value of 5. Corresponds to the WMM AC-VI access category. On Mac OSX, packets are tagged with Class Selector CS4.Voice Flow traffic has a network priority higher than AudioVideo, yet lower than Control. This traffic type should be used for real time voice streams such asVOIP.Sent traffic will contain a DSCP mark with a value of 0x38 and an 802.1p tagwith a value of 7. Corresponds to the WMM AC-VO access category. On Mac OSX, packets are tagged with Class Selector CS5.Control Flow traffic has the highest network priority. This traffic type should only be used for the most critical of data. For example, it may be used for data carryinguser inputs.Sent traffic will contain a DSCP mark with a value of 0x38 and an 802.1p tagwith a value of 7. This does not correspond to any WMM access category. OnMac OS X, packets are tagged with Class Selector CS7.Understanding Your ResultsDuring each testing cycle, the application performs five tests: sending and receiving TCP data, sending and receiving UDP data, and sending and receiving a time probe packet. Based on these tests, it computes TCP and UDP upstream and downstream throughput values (current, for the latest test, and averaged, for all tests), as well as the round-trip time. When all tasks in a cycle are completed, a new cycle automatically begins.ThroughputThroughput (also often referred to as "goodput") is the amount of application-layer data delivered from the client to the server (upstream) or from the server to the client (downstream) per second. The protocol overhead is not included, so when we talk, for example, about the TCP throughput rate of 1 Mbps, we mean that 125 Kbytes of actual data payload were sent between two network nodes during one second, not including TCP, IP, and Ethernet or 802.11 headers.Packet LossPacket loss is applicable to UDP tests only, because in TCP, all packets must be acknowledged and no data loss may occur. UDP loss is calculated as the percentage of data that was lost during transmission. For example, let's interpret the following result:UDP Down: 60.00 Mbps (Ave: 55.00), Loss: 40.0%This means that during the latest test cycle, the server sent 1 megabit of data in 10 milliseconds (actual data amount and duration may vary; we use this number only as an example,) and the client received 0.6 megabits in 10 milliseconds, while 0.4 megabits were lost en route.Round-Trip TimeRound-trip time (RTT) is the length of time it takes for a data packet to be sent from the client to the server and back. The application uses TCP packets for RTT measurements.Frequently Asked QuestionsQ. Why is the UDP downstream throughput value always zero?A. This is a firewall issue. This means that the UDP data being sent from the server cannot reach the client. When performing UDP testing, the client sends upstream UDP traffic to the server from a random UDP port to the server port (27100 by default.) The return downstream traffic goes from port 27101 to the client source port. Use this information to configure your firewall.Q. Why do I see very high (over 50%) UDP downstream loss?A. This is normal if you're running the client on a WLAN station. UDP traffic is not acknowledged. This means that the party that sends traffic can send as much traffic as the networking system can handle without "caring" about how much of it will be lost. If you run the server on the wired side of the network, then a typical PC equipped with a gigabit adapter can send hundreds of megabits per second. These data will first reach a switch, which might be the first bottleneck, and then the access point, which is almost always a bottleneck, because a typical 802.11n access point cannot send more than 100 Mbps of data downstream, i.e. to the client. As a result, most of the UDP packets might be lost en route, but this is the only way to figure out the maximum downstream UDP throughput value.Q. Why does the application require administrative privileges on Windows?A. The lion's share of problems with throughput tests is related to firewalls. For this reason, we took the liberty of opening the Windows firewall for our EXE file. Our application creates a permissive firewall rule on launch and deletes it on exit. This requires administrative privileges.Q. I entered a valid IPv6 address, clicked "Connect", and got the "No route to host" error. Why?A. Link-local IPv6 addresses may require a zone index. For example, instead of fe80:0:0:0:6a5b:35ff:fed1:4633, which does not contain a zone index, you may need to use fe80:0:0:0:6a5b:35ff:fed1:4633%en0.Q. Are the Windows, Mac, and Android versions interoperable?A. Yes, you can run the server on a Mac and the client on a Windows machine or vice versa. The Android client can work with either a Mac or a Windows server.11Frequently Asked Questions | TamoSoft Throughput TestOther Network Analysis SoftwareIn addition to simple test utilities like TamoSoft Throughput Test, we make a number of professional cutting-edge WLAN and LAN analysis and monitoring products:▪TamoGraph Site Survey is a wireless site survey software tool for collecting, visualizing, and analyzing 802.11 a/b/g/n/ac Wi-Fi data. Wireless network deployment and maintenance requires the use of a professional RF site survey tool that facilitates otherwise time-consuming and very complex tasks, such as ongoing analysis and reporting of signal strength, noise and interference, channel allocation, data rates, etc. By using TamoGraph, your business can dramatically reduce the time and costs that are involved in deploying and maintaining Wi-Fi networks and improve network performance and coverage.▪CommView for WiFi is a powerful wireless network monitor and analyzer for 802.11 a/b/g/n/ac networks. Loaded with many user-friendly features, CommView for WiFi combines performance and flexibility with an ease of use unmatched in the industry. CommView for WiFi captures every packet on the air to display important information such as the list of access points and stations, per-node and per-channel statistics, signal strength, a list of packets and network connections, protocol distribution charts, etc. By providing this information, CommView for WiFi can help you to view and examine packets, pinpoint network problems, and troubleshoot your software and hardware.▪NetResident is a network content analysis application designed to monitor, store, and reconstructa wide range of network events and activities, such as e-mail messages, Web pages, downloadedfiles, instant messages, and VoIP conversations. NetResident uses advanced monitoring technology to capture the data on the network, save the data to a database, reconstruct it, and display the content in an easy-to-understand format. NetResident helps your organization to protect sensitive information and enforce security policies, as well as to adhere to government and industry information protection regulations, by providing event-based network visibility and data leak detection and by reducing the risks associated with uncontrolled information flow. We welcome you to visit us at to learn more about these and our other network-relatedsoftware products.12Other Network Analysis Software | TamoSoft Throughput Test。
MacOSXLion下共享网络出现『“Wi-Fi”有自分配的IP地址169.254.XXX。。。
MacOSXLion下共享⽹络出现『“Wi-Fi”有⾃分配的IP地址169.254.XXX。
昨天⽤蜂窝数据下载了很多App，导致没流量了，⽆奈⽤Mac分享下⽹络给iPhone⽤，结果⼀直出现这个错误，很是恼⽕。
Google了半天，在Apple官⽹找到了解决办法，原⽂如下：Internet connection does not work with an IP address space of 169.254.xxx.xxx from ISP, router, or manual configurationProducts AffectedAirPort, Apple TV (1st generation), Apple TV (2nd generation), Bonjour, , Mac OS X 10.4, Mac OS X 10.5, , iPad, iPhone, iPod touchSymptomsYour Mac, iOS device, or Apple TV cannot access the Internet with an IP address of 169.254.xxx.xxx (where xxx represents a number from 0 to 255).The symptoms of this issue include:Safari, iChat, and other Internet-dependent applications in Mac OS X may display the message "You are not connected to the Internet."Mail may put all of your email accounts into an "Offline" status.iOS devices cannot use other Internet features, such as the App Store.Apple TV may be able to use Home Sharing with computers on your local network, but not any features that requireInternet access, such as movie trailers or rentals.In Mac OS X, an AirPort menu bar icon with an exclamation point may appear, and the AirPort menu may state "Alert: No Internet Connection…".Use this article if:Your Mac, iOS device, or Apple TV is connected to a network that should provide access to the Internet, and which has a functioning DHCP server (such as an AirPort base station in default configuration).Your Mac, iOS device, or Apple TV is assigned an IP address of 169.254.xxx.xxx by your DHCP server, or you havemanually assigned it an IP address of 169.256.xxx.xxx.Your Internet-facing router is being assigned an IP address of 169.254.xxx.xxx by your ISP.ResolutionMake sure your Your Mac, iOS device, or Apple TV is properly connected to your home Wi-Fi network (or via Ethernet ifyour Mac or Apple TV uses an Ethernet cable).Make sure your router (such as an AirPort base station in default configuration) is working properly and is assigning IPaddresses to your devices via DHCP. See article for details.If your ISP is assigning your Internet facing router, Mac, or iOS device an IP address of 169.254.xxx.xxx, contact the ISPsupport staff and ask for a proper IP address to access the Internet.If the DHCP server has been configured to issue an IP address of 169.254.xxx.xxx, contact the administrator of the DHCP server and ask that they issue a proper IP address to access the Internet, such as what is issued by an AirPort basestation in default configuration (10.0.1.25 or similar). A DHCP server should not be issuing an IP address of169.254.xxx.xxx.If you have manually configured your Mac or device with an IP address of 169.254.xxx.xxx, reconfigure your device to usea proper IP address to access the Internet.Additional InformationThe 169.254.xxx.xxx IP address space is reserved for self-assigning or link-local IP addresses. They are used when yourdevice is not connected to any network at all or a network that has no DHCP server, so that devices can assign their own IPaddress. When these devices use , they can create their own DNS name resolution on the network. This is useful when you are connected to a network that is completely isolated; you will be able to network to other devices and even see their share names and Bonjour advertised services.covers the details of this IP address space. Section 1.6 covers the "Alternate Use Prohibition" of this IP space.Note: In certain situations, a computer or wireless device may create an ad-hoc Wi-Fi network for setup or file sharing purposes.These Wi-Fi networks do not typically provide Internet connectivity. Common network names for some ad-hoc networks mayinclude "Free Public WiFi", "HP Setup", or "default". ⽐较啰嗦，简单说下我是如何做的，⾸先我的⽹络是PPPoE拨号的。
联想2200-参考手册
CANON 无线网络设置指南
无线网络设置指南[相机ÍÎ计算机]（适用于Mac OS X第10.4版使用者）重要事项！把相机连接到计算机之前，必须先安装此软件。
使用软件之前，请先详细阅读本说明书，并妥善保存说明书作日后参考。
2006.06.01 CDP-C054-010© 2006 CANON INC.2目录目录计算机和相机的无线网络设置3步骤 (3)准备事项 - 使用无线连接之前 (4)用相机注册目标设备 (9)连接 (17)断开 (19)删除目标设备 (20)使用无线网络功能21相机连接计算机之后可执行的操作 (21)无线连接故障排除22联系我们之前 (22)防火墙 (23)免责声明-在本书编制过程中已力求内容的正确与完整，如有任何错误或缺失不负任何责任。
佳能公司保留权利可随时变更本手册所提及的硬件及软件规格而无须事先声明。
-未经佳能公司事先书面授权，本手册任何部分不得被复制、传输、抄录、保存于检索系统中，或以任何形式翻译成任何语言。
-佳能公司对于因相机、软件、SD存储卡(SD卡)、个人计算机、外围设备的错误操作或故障，或使用非佳能公司的SD卡造成文件损毁或数据遗失所导致之损失概不负责。
商标声明-Macintosh、Mac OS是苹果计算机公司在美国与其他国家注册的商标。
-Wi-Fi®是Wi-Fi Alliance的注册商标; 以及Wi-Fi CERTIFIED TM、WPA TM和Wi-Fi CERTIFIED标志是Wi-Fi Alliance的注册商标。
版权所有© 2006 Canon Inc. 保留所有权利。
3计算机和相机的无线网络设置本章说明如何配置无线网络的功能，把相机经由无线连接方式，连接到计算机。
步骤请依照以下步骤来配置无线设置。
准备事项检查计算机的操作环境请确定计算机所使用的操作系统是Mac OS X第10.4版或之后新版。
检查无线连接的配置为了连接用的注册步骤顺利进行，先确定计算机的网络配置及依照需要做好准备。
Mac OS X 10.4.9常用问题解答
Mac OS X 10.4.9 常用问题解答在安装Mac OS X 10.4.9 时，请各用户谨慎安装。
安装前，确保硬盘空间足够，并关闭一切其他软件，暂时让自己的电脑一心一意地安装系统更新。
千万不要突然关闭电脑，如果您的电脑是笔记本电脑的话，记得连上电线。
建议一切用户使用Combo 更新来更新到最新版本的Mac OS X，并留意使用正确版本(PowerPC 与Intel 处理器的麦金塔电脑版本)。
系统重新开启时，请耐心等待。
一些Mac OS X 10.4.9 用户所提到的一些问题如下:1. AirPort 出现问题- 问题: 无法识别内设硬件；连接到无线路由器及基站出现问题。
-解决方案: 确保更新到最新的AirPort 固体软件；关闭并重新开启无线网络基站；关闭无线加密(WEP, WPA)；更换无线频率；删除一切“偏好网络”设定；关闭并重新打开AirPort 卡；开启反干涉功能；在用户的~/资料库/Preferences/ 文件夹内，删除“com.apple.internetconfig.plist”、“com.apple.internetconfigpriv.plist”与“com.apple.internetconnect.plist”文件，及一切如“com.apple.internetconfig[]”的文件。
- 相关问题: Mac OS X10.4.9 附带了WWAN 更新，对于一些位于澳洲和欧洲的快速无线网络用户来说可能造成一些使用方面上的不便。
您可以删除资料如下(一切文件夹位于您的硬盘根底上): “/资料库/Modem scripts/WWAN Support”、“/系统/Library/CoreServices/Menu Extras/WWAN.menu”、“/系统/Library/Extensions/IOSerialFamily.kext/Contents/PlugIns/AppleWW ANSupport.kext”与“/系统/Library/Extensions/IOSerialFamily.kext/Contents/PlugIns/AppleWW ANVerizon.kext”(删除最后两个文件时，要在Finder 中选定“打开包装”)。
苹果系统
下面是用户共享的文件列表，安装电驴后，您可以点击这些文件名进行下载
g f e d c b [Mac.OS.X.操作系统].TLF-SOFT-Mac.OSX.Snow.Leopard.v10.6.7-HOTiSO.dmg
详情
gfedcb [Mac.OS.X.操作系统].TLF-SOFT-Mac.OSX.Snow.Leopard.v10.6.7-HOTiSO.nfo
《Mac OS X Lion 操作系统》(Mac OS X Lion) v10.7 Final Retail[光盘镜像]
Mac OS X is the world's most advanced operating system. Built on a rock-solid UNIX foundation and designed to be simple and intuitive, it's what makes the Mac innovative, highly secure, compatible, and easy to use. Quite simply, there is nothing else like it.
3.5GB 161B 9.7GB
反馈意见 | 创建资料>> 软件资源事务区
该用户的其它精华资源 《网络安全解决方案》 (Symantec Network Access Control)12.1[光盘镜像] 《企业级安全防护》 (SYMANTEC ENDPOINT PROTECTION)v12.1 TOOLS AND DOCUME... 《项目管理软件》(KIDASA Software Milestones Simplicity 2010)v2011.02.0... 更多 >>
教你怎样在普通PC上安装MAC OS X (以Y450【T6500 130M 】为例)
所需软件：1.iAntares OSx86 10.6.3 v2.2安装光盘2.BootThink3.原版win7安装光盘一张或含PE的光盘一张----正文：第一步:在WIN7下.为MAC腾出空间来.我个人分了30G.其实20G也够用了.右击.计算机>管理>进入磁盘管理选择一个.你自己觉得空间可以腾出来的那个盘.我选择了最后一个盘.F盘.然后选择"压缩卷"输入新分出来的空间大小.这里.我分了30G.也就是输入30720 (20G输入20480.) 放心.这样不会破坏你原有的任何数据.放心去分吧.输入空间后.点击"压缩"得到了一个可用空间右击这个可用空间选择"新建简单卷"出现下一步提示.当然是直接点选了.再现下一提示.同样不需要理会.直接点击"下一步"再次选择"下一步"这里.选择"按下列设置格式化这个卷"然后"下一步"点"完成"最后.记下你分的这个盘的位置.(我的是最后一个盘.在F盘之后.为H盘)重启电脑，插入WIN PE盘（一般PE盘都带有PM分区工具），设置U盘启动，进入WIN PE，打开PM，找到刚刚划出来的分区，格式化为FAT32的格式，在右键该分区，点“修改分区ID”，把分区ID修改为AF，默认的里面是没有AF的，你自己手动输入AF，AF就是MAC扩展式（日志式）的格式。
这样格式的分区，Windouws是无法读出的，所以你以后可以在Win 下安装一个macdrive，就可以在windows下修改MAC了。
第二步:安装MAC了关于安装自定义的选项.引导程序.这个.可以参考东皇版主的说明.这里仅以Y450为例安装.不过.大部份可以正常启动的.1.投光盘启动看到安装画面.2.此时.F8进入变色龙介面3.输入"busratio=20"(引号.不用输.你一样.可以尝试不输命令进入.拼运气)4.若干个等待画面.这段时间.大概有.6分钟左右.你看一下.硬盘.光驱有工作的话.就不要囧停了.5.看到了安装介面.6.语言.看你吧.这里选择简体中文.然后.点.右下角标志.下一步.7.等待界面.8.欢迎介面.(这里注意的是.出现了这个介面.先不要点选继续.稍等一下.上面的工具栏出来了)9.点击上方工具栏的"实用工具"10.选择"磁盘工具"11.等待信息12.点击选择你在WINDOWS下.分出来的那个空白分区(diskOS..)这里不要选错.要不然.会造成其它盘的资料丢失.13.点选"抹掉"14.这里"宗卷格式"的下拉菜单.我们选择"Mac OS 扩展式 (日志式)"名称方面.随便你写5.最后.选择"抹掉"16.现在提示窗口..继续选择"抹掉"17.等待执行18.完成后.点击该窗口的左上角.关闭.我们将继续看到原先的欢迎介面.点选"继续"19.声明当然选择"同意"20.点击选择刚刚抹掉的那个盘..点"继续".再继续21.这个时候.可以喝杯咖啡.点些点心.等上好一会儿.半个左右.22.最后.提示装完重启.注意:这个时候.在"剩余时间:大约一分钟"这时候.可能会出现"安装失败"我们不用理会.不需要惊慌.事实上.已经安装完毕的了.第三步.设C盘为活动分区.进入WINDOWS当你有WINDOWS原版光盘的时候.请看A步骤.当你有PE的时候.请看B步骤.方法A:1.启动光盘..点选"修复计算机"2.选择好恢复选项.点下一步.下一步.重启即可进入WINDOWS.方法B:1.启动PE...进入PE.你看一下.哪种分区工具.你是熟悉一点的.一般的PE都带有"PartitionManager"的.虽然版本不一样.细节方面.也有小小的出入.不过.都是大同小异.2.选择到C盘.3.设C盘为.活动分区.4.完成为.重启电脑.进入.WINDOWS了.第四步:安装BootThink及加载驱动.1.安装BootThink.2.多多逛论坛吧.找到自己合适的KEY(驱动)放进C:\Darwin\System\LibrarySL\Extensions 文件夹内.至于dsdt.aml文件放在C:\Darwin 文件夹内.----------------------------------------------------这里重点讲解小Y..Y450的驱动.及DSDT文件的位置处理方法.这是保证今后.不出现五国的重点的重点!上面是我加载的小Y驱动和DSDT.楼下可以下载.加载在C盘下的驱动.不能包含声卡驱动.小Y的.触摸板要想正常.还要删除.C:\Darwin\System\LibrarySL下的.Extensions.mkext.声音方面.1.首先..删除MAC.下.自带的AppleHDA.kext2.再用.Kext Helper.将VoodooHDA.kext安装到MAC下.对于已经安装好MAC.而已已经出现五国的小Y朋友.最简单用效的方法.就是.在WINDOWS下.把 BOOTTHINK先删除.再重新安装.加载驱动.然后也把MAC删除了.重新再安装一次!(当然.也有其它方法.就是清除MAC和BOOTTHINK缓存这个方法.个人觉得.还是什么都重装一次好一点)经过这些步骤后.小Y从此以后.再也不会五国了.按照我步骤去做的.但还出现五国的小Y朋友.留言给我.我负责到底!--------------------------------------------------------- 第五步.完成MAC的最后安装.配置好MAC1.装好BOOTTHINK后.重启电脑.当然选择进入bootthink了.2.按F8进入命令行模式.3.输入 -x32 后回车.系进系统.(进入32位)4.等待画面.5.欢迎介面.下一步这里留空.不用输入6.创建你的账户..你随便填.输入账号.和密码7.最后.安装完成.安装MAC下的130M显卡驱动如何在Mac OS X Leopard 上安装nVIDIA 130M 显卡驱动程序nVIDIA G1xx系列显卡的MacOS驱动安装一直是让人很头疼的事情，NV9***和2xx 系列显卡的MacOS驱动早就有了，可是基于这两者之间的1xx系列显卡驱动却一直不见踪影，实在是让我们这些用1xx的家伙很极度郁闷。
Razer Orochi鼠标说明书
MASTER GUIDE (MAC)CONTENTS1. System & Hardware Requirements2. Package Contents3. Key Features4. Installation / Registration / Technical Support5. Configuring Your Razer Orochi6. Copyright and Intellectual Property InformationThe Razer Orochi™ brings mobile gaming mouse standards to new heights with its small form factor and bleeding-edge technology. Equipped with a gaming-grade laser sensor and dual mode wired/wireless functionality, the Razer Orochi uses gaming optimized Bluetooth® technology to address your need for portability and ease of use with a wired mode option for gaming grade performance.Gaming on the go is now possible.1. SYSTEM & HARDWARE REQUIREMENTS:• Bluetooth® enabled Mac with USB port• Mac OS X (v10.4 and above)• Internet connection (for driver installation)• 35MB of free hard disk space2.PACKAGE CONTENTS• Razer Orochi Gaming Mouse• 2x AA Battery• USB Cable• Travel Pouch• Certificate of Authenticity• Quick Start Guide• Master Guide (PC)• Master Guide (MAC)3. KEY FEATURESDefault button assignments (MAC)A Button 1 – ClickB Button 2 – MenuC Button 3 – Scroll Wheel and Mouse Button 3D Battery / Pairing IndicatorE Button 5 – Mouse Button 5F Button 4 – Mouse Button 4G Button 7 – Sensitivity Stage UpH Button 6 – Sensitivity Stage DownI Razer Precision™ 3G Laser SensorJ Power On/Off SwitchK Gaming Optimized Bluetooth ConnectivityL Ultraslick™ FeetM 1000Hz Ultrapolling™ / 1ms Response Time (Wired mode) N Razer Synapse™ On-board MemoryO Connector Jack for Micro-USB End of Cable (Wired Mode)4. INSTALLATION / REGISTRATION / TECHNICAL SUPPORT[WIRELESS MODE]1. Remove the top cover of the Razer Orochi.2. Insert the batteries into the Razer Orochi following the directions indicated.3. Reattach the top cover onto the Razer Orochi. Please ensure it is secured.4. Switch on the Razer Orochi.5. Please ensure that Bluetooth is activated on your Mac. ‘Add a Bluetooth device’ by following theinstructions for your operating system. Activate the pairing process by depressing all four side buttonstogether on the Razer Orochi for five seconds. The indicator lights on the top of the Razer Orochi will blink in blue to indicate the pairing process6. When the pairing process is completed, the indicator light will stop blinking. Your Razer Orochi is thenready for use in wireless mode.IMPORTANT NOTE:Scroll wheel light is off by default. You can turn it on in the LIGHTING ANDMAINTENANCE TAB.[WIRELESS MODE]1. Connect the micro-USB end of the cable to the Razer Orochi.2. Plug the mouse into the USB port of your computer. The Razer Orochi is then ready for use as a highperformance wired gaming mouse.Mac OS X (v10.4 and above) Driver installation instructionsStep 1: Plug your Razer Orochi into the USB port of your Mac.Step 2: Download the Driver Installer from /.Step 3: Run the installer.Step 4: The Razer Orochi introduction screen appears. Click CONTINUE.Step 5: Read the software license agreement and click CONTINUE.Step 6: An confirmation popup screen will appear. Click AGREE if you accept all terms of the a greement.Step 7: If you want to choose the destination folder where the driver software will reside, click CHANGE INSTALL LOCATION. Otherwise, click INSTALL to begin installation.Step 8: At the end of the installation, follow the instructions onscreen to restart your computer.Click RESTART.REGISTERING YOUR RAZER OROCHIPlease visit /registration/ for online product registration.What you’ll get:• 2 years limited manufacturer’s warranty• Free online technical support at /..5. CONFIGURING YOUR RAZER OROCHIADJUST PERFORMANCE TABIMPORTANT NOTE:Configuration of the Razer Orochi can only performed in Wired Mode.It is not possible to configure it in Wireless Mode.1. Current SensitivitySensitivity is how much your cursor moves on the screen in relation to your physical movement of the mouse. A higher sensitivity value would translate to less physical movement of the mouse, and vice versa. In the ADJUST PERFORMANCE tab, the current sensitivity of your Razer Orochi in dots per inch (DPI) is indicated and can be easily adjusted by moving the arrow along the slider in steps of 125DPI. For greater flexibility in adjustment, you can select the ENABLE INDEPENDENT X-Y SENSITIVITY option and move the individual X and Y arrows along the slider.NOTE:In Wireless mode, the maximum sensitivity of Razer Orochi is limited to 2000DPI.To set a different sensitivity level in the X and Y axis, you can select the “Enable independent X-Y sensitivity” option and move the individual X and Y arrows along the slider.NOTE:The Independent X-Y sensitivity feature is not available in Wireless mode.2. AccelerationAcceleration allows you to increase your physical mouse movement to onscreen cursor movement ratio based on the rate of change of your movement speed. The higher the value of acceleration, the higher the ratio will be. You can activate acceleration by checking the “Enable Acceleration” box and moving the arrow along the slider.3. Polling RateThe polling rate determines the time intervals that the Mac retrieves data from your Razer Orochi. A higher value would mean shorter intervals and therefore less latency. You can switch between 125Hz, 500Hz and 1000Hz by clicking on the individual polling rate drop down menu.NOTE:• This function is only available in Wired mode.• In Wireless mode the Razer Orochi operates at 125Hz only.LIGHTING AND MAINTAINENCEIMPORTANT NOTE:Scroll wheel light is off by default. You can turn it on in the LIGHTING AND MAINTENANCE TAB. LIGHTINGTurn on/off the scroll wheel lights on the Razer Orochi.MAINTENANCEUpdate the Razer driver and firmware software by clicking on the CHECK FOR UPDATES button. This will connect you to for the latest driver/firmware downloads.You can also restore your Razer Orochi to the default settings by pressing the RESTORE ALL SETTINGS TO DEFAULT button.NOTE:• High performance batteries are recommended for longer battery life.• To conserve power, switch off the Razer Orochi when not in use.RESTORE ALL SETTINGS TO DEFAULT6. COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION©2009 Razer USA Ltd. Patent Pending. All Rights Reserved. Razer™, the Razer Triple-Headed Snake logo, the Razer distressed word logo, Orochi™ and other trademarks contained herein are the property of Razer USA Ltd and/or its affiliated or associated companies, registered in the United States and/or other countries.Mac OS, Mac and the Mac logo are trademarks or registered trademarks of Apple Inc., registered in the U.S. and other countries. All other trademarks are the property of their respective owners.The Bluetooth word mark and logos are owned by the Bluetooth SIG. Inc. and any use of such marks by Razer is under license.Razer USA Ltd (“Razer”) may have copyright, trademarks, trade secrets, patents, patent applications, or other intellectual property rights (whether registered or unregistered) concerning the product in this Manual. Furnishing of this Manual does not give you a license to any such copyright, trademark, patent or other intellectual property right. The Razer Orochi (the “Product”) may differ from pictures whether on packaging or otherwise. Razer assumes no responsibility for such differences or for any errors that may appear.The laser sensor does not work on mirrors or clear glass.Information contained herein is subject to change without notice.。
Mac os 应用程序及实用工具简介
Mac os 应用程序及实用工具简介应用程序1.地址簿存储全部联系人信息地址簿为存储家人、朋友和同事的联络信息提供灵活、方便的位置。
你可以从其他应用程序导入信息，为俱乐部和群组创建分发列表，打印地址标签和信封等。
随处访问联系人信息由于地址簿整合于整个Mac OS X 系统，你只需一次性输入联系人信息，即可从Mail、iChat 以及其它应用程序访问该信息。
地址簿还可以将Mac 上的联系人信息与你的移动电话、PDA 或iPod touch 同步，这样地址簿就可与你如影相伴。
2.Automator自动执行经常性任务借助Automator，你可以快速、高效、轻松地完成费时的重复性手动任务。
Automator 可让你跳过复杂的程序和脚本编写，这通常是创建自动化流程所需的环节。
你只需将一些指令拖动至Automator 工作流程，从而将一些单独的步骤组合为完整的任务。
Automator 配备了拥有数百条指令的资料库。
使用Watch Me Do 指令，你可以记录一个动作(比如按下按钮或者不用内置Automator 支持控制应用程序)，并在工作流程中作为一个指令来重放。
3.计算器简单及复杂计算计算器应用程序可让你进行简单的算术计算、复杂的对数计算，以及逻辑运算。
它包含三种模式：基本、程序员，以及科学。
你可以使用Print Tape 功能查看并打印计算结果。
计算器还包含单位转换器，可转换如面积、长度、数量及货币等常用度量单位。
它甚至还会说话。
国际象棋在游戏中挑战自我有了Mac OS X 中的国际象棋，你可与Mac 或一个伙伴对弈，也可以观看Mac 与自己博弈。
可自定义你的棋盘和棋子，有多种风格可供选择。
你可以凭借声音控制棋子，甚至每走一棋都可让电脑高声报出。
Dashboard快速访问信息Dashboard 如同widget 的基地：widget 是可让你执行常规任务并快速访问信息的小程序。
单击一下，Dashboard 即会迅速出现，其包含的widget 将为你呈现丰富的信息世界― 实时天气信息、证券行情、航班信息等。
IOGEAR GWU625 无线N USB适配器商品说明书
GWU625Compact Wireless N USB AdaptorIoGear Part #: GWU625The new IOGEAR Compact Wireless-N USB Adapter allows you to connect your laptop or desktop to any Wireless-N network in your home or office. The Wireless-N (IEEE™ 802.11n) USB 2.0 Adapter is the perfect solution for those users who want to upgrade older computers to the next generation of wireless technology.Product DescriptionUsing dual antennas (1T2R) this product provides data rates up to 300Mbps and reduces Wi-Fi dead zones in your wireless environment. This new standard supplies sufficient bandwidth for faster file transfer, music downloads, video streaming, on-line gaming & HD multi-media applications. In addition to the increased speed and coverage, you will be pleased to know that it is compatible with your existing 802.11b and 802.11g routers and access points. The unit also features a WPS (Wi-Fi Protected Setup) button. This button assures quick and secure network setup.Enjoy improved range, speed and reliability today with the Compact Wireless-N USB Adapter from IOGEAR!∙Add high-speed Wireless-N (802.11n) Internet access to any USB enabled computer ∙1T2R multiple radio technology improves effective throughput and range over existing 802.11 b/g products∙Compact and portable adapter plugs into your computer’s USB port∙Compatible Network Standards: IEEE 802.11n (up to 300Mbps) IEEE 802.11g (up to 54Mbps) IEEE 802.11b (up to 11Mbps)∙Push-button Wi-Fi Protected Setup™ (WPS) simplifies secure and easy wireless configuration∙WEP,TKZP, AES, WPA and WPA2 hardware encryption schemes∙Frequency Band Modulation Method: QPSK / BPSK / 16-QAM / 64-QAM∙Supports Ad Hoc and Infrastructure modes∙Supports USB 2.0 with up to 300Mbps transfer rate; backward compatible to USB 1.1 and 1.2∙Compatible with Microsoft Windows, Mac or Linux OSSystem Requirements∙Operating Systemo Windows XP, Windows Vista, Windows 7o Mac OS X v10.4 and aboveo Linux Fedora 10(Kernel: 2.6.27.5-117)∙Available USB port∙Wireless networkPackage Contents∙ 1 x Wireless-N USB 2.0 Adapter∙ 1 x Driver CD∙ 1 x Quick Start Guide∙ 1 x Warranty / Registration CardFor use with Raspberry PiThe standard Raspbian OS for Raspberry Pi has the driver for this wireless adapter built-in, but Raspbian does not include a graphical WiFi interface. The following instructions allow you to install the graphical user interface for network connections.Connected to wired EthernetThe easiest way to install the Network Manager is to connect the Raspberry Pi to a wired network (this only has to be done once). Once connected, from the command prompt or terminal window of the desktop, type the following command: sudo apt-get install wicd -y and press Enter. When the install is complete there will be a networking icon in the lower right hand corner of the desktop.Connect over WirelessIf you do not have a wired connection, you can manually set up a wireless connection the first time, then install the Network Manager. First, type sudo nano /etc/network/interfaces and press Enter. This will open a text editor. Add the following text to the end of the file:auto wlan0iface wlan0 inet dhcpwpa-ssid "SSID"(Keep quotes, replace SSID with the SSID of your wireless network)wpa-psk "PASS"(Keep quotes, replace PASS with the network password)Once typed, press Ctrl and X together, press Y to confirm saving, and press Enter. Then type ifup wlan0. This will activate the wireless interface and connect to the network. Once the network is up and connected to the Internet, type sudo apt-get install wicd -y and press Enter. When this is done, type sudo nano /etc/network/interfaces and remove all text that was previously added. Press Ctrl and X, then Y, then Enter to exit. Reboot the Raspberry Pi and the Network Manager will be present at the bottom corner of the desktop.SpecificationsPower Consumption Transmit : < 380mA. ; Receive: < 250mA. Operating Temperature0 ~ 50 celsiusStorage Temperature-10 ~ 70 celsiusUSB Specification USB 2.0Humidity 5 ~ 90% (non-condensing) Transmission Power17 dBmFrequency Band 2.4GHz ~ 2.483GHz unlicensed ISM band Modulation IEEE 802.11n: BPSK, QPSK, 16-QAM, 64-QAMData Rate IEEE 802.11n : 6, 9, 12, 18, 24, 36, 48, 54, 60, 90, 120, 180, 240, 270 and up to 300MbpsInterface USB 2.0Security64-bit or 128-bit WEP/WPA TKIPManagement Windows-based UtilityOperating Range100 -400m, depending on surrounding environment Encryption64 bit / 128 bit WEP, TKIP, AESAntenna Type On board chip antennaRange Up to 320 ftChipset RTL8191SUDimensions GWU625Unit DimensionsWidth2"Height1"Depth0.25"Unit Package DimensionsWidth5"Height7.75"Depth1"WeightUnit Pack Wt.0.15 lbUnit Wt.0.30 ozGWU625。
适用于链接操作系统移动打印机的802.11n和蓝牙无线电的Zebra 无线配置快速入门指南
Radio Approvals
Zebra Wireless WLAN printers are only approved for use in certain countries. In no event shall Zebra be liable for uses of Zebra Wireless WLAN printers that are contrary to local law. To determine whether you are allowed to use your Zebra Wireless WLAN printer in a specific country, check to see if the radio type number that is printed on the identification label of your device is listed on the radio approval list posted on the Zebra support site at /.
解决wireless Zero Configuration不能始终保持启动状态的问题
解决wireless Zero Configuration不能始终保持启动状态的问题（为什么Wireless Zero Configuration总是不能自动启动）Wireless Zero Configuration服务是一个支持无线上网的服务，如果该服务停止，则无法找到无线网络。
很多笔记本装完系统，上好无线网卡驱动后可以使用无线网络功能，但系统只要注销或重新启动后，就无法使用无线网络了，每次开机/重启都要手动启动Wireless Zero Configuration服务才能无线上网，把Wireless Zero Configuration服务设置成自动启动，但重启后该服务还是没有自动启动，依然要手动启动。
因为该服务如果没有启动，则无法使用无线上网功能，但是每次开机都要手动去启动该服务，非常繁琐。
找原因。
为什么会出现这样的情况？是因为装完无线网卡驱动后，大部分无线网卡会自带第三方的无线网络程序，而第三方的无线网络程序会停止Wireless Zero Configuration服务，使用自己的服务程序，但是这样会导致系统自带的无线网络程序无法工作。
解决方法：首先说一下这个服务的位置：“开始”菜单，“运行”，输入“services.msc"进入服务，开启”Wireless Zero Configuration”，并且可以选择在后面的“恢复”选项里面三个都选择“失败后重新启动”！首先，检查在无线网卡属性页面,确保“用Windows配置我的无线网络设置”在勾选状态。
其次，在“控制面板”->”管理工具”->”计算机管理”->“设备管理器”点击“查看”菜单中的“显示隐藏的设备”，找到其中的“非即插即用驱动程序中”，找到“NDIS 用户模式 I/O 协议”，双击打开属性对话框，选择“驱动程序”选项卡，你会发现，当前状态是“已停止”，选择下面的启动栏中的下拉列表，并且选择类型为“自动”，点击确定按钮。
Windows+苹果OS X 双系统安装教程
一、准备工作二、安装①安装Windows 8.1②安装mac os x三、安装驱动、自行修改适合自己的config.plist文件本教程特点：①既支持Windows uefi快速启动，又可以完美引导OS X。
②支持recovery HD分区，可以开启查找我的Mac（Find MyMac），装X神器③OS X是原版的，非懒人版一、准备工作：1、电脑配置要求：CPU：英特尔CPU，推荐至强E3、I7、I5。
不推荐AMD，可能无法启动。
显卡：NVIDIA、AMD皆可。
推荐使用免驱显卡，如GTX660、GTX 680、GTX 770内存：4GB以上主板：必须支持uefi硬盘：需要GPT分区，MBR靠边。
系统环境：uefi启动的MSDN Windows 8.1/82、需要的东西：（1）、三个U盘或内存卡。
一个大于8G的U盘或内存卡作为OS X安装程序的启动盘一个支持uefi启动的MSDN Windows 8.1/8启动盘，用来安装Windows系统。
（如果你的win8以uefi启动，则可以跳过）一个winPE启动盘（用来处理Windows引导）（2）、耐心，可能捣鼓好几天都弄不好，进行前，请三思。
如果失败，要多爬贴。
（3）、时间3、需要的软件：（1）OSX Yosemite 14A389 安装U盘镜像(该文件来自远景)链接：/s/1qW4ZMnq密码：6jzs镜像详细信息：文件名：USB_InstallOS X Yosemite.dmg文件大小：5,296,043,546 字节MD5 =7a0cc166b29f5581244def0995762ec0（2）Clover引导（本引导适用于三代I7、部分I5和E3 1230 v2，其他U尚未测试）链接：/s/1kTkRmhL密码：nav8（3）TransMac：用于制作OS X启动U盘（自行百度下载）（4）驱动大全：链接：/s/1jG1Oorc 密码：1y1u（5）clover ：链接：/s/1pTrh8 密码：jcjd二、安装①安装Windows 8.1用软碟通制作win 8 启动U盘，以uefi安装Windows 8.1。
Oracle-VM-VirtualBox虚拟机安装Mac-OS-X详细图解
此前曾多次尝试用硬盘安装助手和变色龙来安装Mac OS X 但均未成功。
镜像可以写入硬盘，电脑的启动选项里也出现了Mac OS X 和变色龙的选项，可都不能进入进行安装。
就其原因有二：第一我的PC从CUP到主板芯片组再到显卡都是AMD的，兼容程度上不如INTEL的；第二因为是单位给配的电脑，都有增霸卡，启动系统是无法绕过此硬件。
终于，改变思路，用虚拟机VirtualBox安装。
我用的版本是3.2.4的，最新的版本是3.2.10。
其实界面和操作都差不多，在这里就不多说什么了，论坛里和网上都有很细致的教程。
只有一点要提的，建立虚拟介质时，操作系统选Mac OS ，下一个选项当然就选Mac OS server。
1.打开虚拟机，再打开你建立好的虚拟硬盘，会出现以下画面按任意键，开始安装。
2.选择简体中文3.选择实用工具里的磁盘工具，进行摸盘，这是必须的。
4.摸盘完成后就真正进入了安装阶段5.此时一定不能直接点安装，要点下图最左边的自定。
6.此时会出现各种驱动的选项，第一项已经默认选择了，不要动，剩下的要根据你电脑的具体配置进行选择，这一步至关重要，如果做不好会导致你安装的mac os 不能运行。
后面会有详细的配置驱动选择说明。
7.等待安装，大约20分钟左右8.安装成功，重启。
9.此时点Show All ,再选China,不说相信大家都知道吧。
10.这里的ID可以不填，如下图12.下图可以随意填写。
13.下图的用户名和密码即PASSWOED请记住，以后安装软件时需要输入的。
14 好了进入只属于你的MAC OS世界吧！下面是我安装好的MAC OS X 截图iDeneb 10.5.6自定义驱动详细中文说明警告!不要将这个版本覆盖安装到已存在的Mac OS X上，这可能导致安装失败。
不要选择两个或更多相同种类的驱动，比如说，同时安装两个声卡或SMBIOS的驱动，很多情况下会导致安装失败。
默认安装9.6原版内核。
如何解决Mac OS系统无法连接WiFi问题
如何解决Mac OS系统无法连接WiFi问题在当今数字化时代，无线网络已经成为人们生活中不可或缺的一部分。
然而，有时我们会遇到一些令人沮丧的问题，例如Mac OS系统无法连接WiFi。
这个问题不仅会影响我们的工作和学习，还会影响我们的娱乐和社交。
因此，解决这个问题对于每个Mac用户来说都是至关重要的。
在本文中，我将探讨一些解决Mac OS系统无法连接WiFi问题的方法。
首先，我们需要检查WiFi路由器的设置。
有时候，WiFi路由器的设置可能会导致Mac无法连接。
我们可以通过访问路由器的管理界面来检查设置。
首先，我们需要确保路由器的无线功能已经打开，并且正常工作。
然后，我们可以尝试重启路由器，有时候这个简单的步骤就可以解决问题。
如果问题仍然存在，我们可以尝试更新路由器的固件。
有时候，旧的固件版本可能导致兼容性问题，更新固件可能会解决这个问题。
其次，我们可以尝试重新设置Mac的网络设置。
有时候，网络设置可能会出现错误，导致Mac无法连接WiFi。
我们可以打开“系统偏好设置”，然后点击“网络”。
在网络设置界面中，我们可以删除WiFi配置文件，并重新添加。
这样做通常可以清除任何潜在的错误，并重新建立与WiFi网络的连接。
另外，我们还可以尝试重置Mac的系统管理控制器（SMC）。
SMC是Mac的一部分，负责管理硬件功能，包括WiFi。
有时候，SMC可能会出现问题，导致WiFi无法正常工作。
为了重置SMC，我们可以先关闭Mac，然后按住电源按钮约十秒钟，直到Mac关闭。
然后，我们可以松开电源按钮，重新启动Mac。
这个简单的步骤可以清除SMC中的任何错误，并恢复WiFi的正常功能。
此外，我们还可以尝试删除Mac的网络首选项文件。
这个文件存储了Mac的网络设置，有时候可能会出现错误。
我们可以通过打开“Finder”，然后点击“前往”菜单，选择“前往文件夹”。
在弹出的对话框中，我们可以输入“/Library/Preferences/SystemConfiguration/”来打开网络首选项文件夹。
如何配置无线路由器及怎么设置的方法（Howtoconfigureawirelessrout..
如何配置无线路由器及怎么设置的方法（How to configure a wireless router and how to set it up）How to configure a wireless router and how to set it upHere are three ways to set upMethod 1: PC and wireless routing connectionFirst, of course, the wireless router should be properly connected. Before the wireless router, wireless router and PC must be connected with the other end of the cable, the cable connected to the wireless router LAN port, and then Modem out of line connected to the wireless router's WAN port, so ok. Following chartLogin to the wireless router management interface. Connected to the wireless router PC IE input 192.168.1.1, most of the wireless router default management IP 192.168.1.1, user name and password are admin, which is a specific wireless router can refer to the relevant instructions, instructions have indicated on the wireless router management interface username and password.If you do not open the address after entering the 192.168.1.1, that is the PC network settings problem, open the connection property, the IP address is set to 192.168.1.x, (x is 2 to 255), other default, the gateway can ignore. Or choose to assign IP automatically.When you enter the configuration interface of the wirelessrouter, the system automatically pops up a settings wizard". For the novice, follow the setup wizard and go on next. In fact, the setup wizard is the same as the project you manually set up yourself.In the network parameter setting of the wireless router, the parameters of the two interfaces of the LAN port and the WAN port must be set. In practical applications, many users only set up the WAN port, and the LAN port setting keeps the default status of the wireless router.The WAN port settings of the router:If the WAN port receives the device and dynamically allocates the IP, the dynamic IP user should be selected, but this is rarely encountered, and the average family uses either the PPPoE mode or the static IP mode. To use wireless router dial-up users, you should select the PPPoE mode, the corresponding fill in the corresponding ADSL user name and user password. If it is fixed IP access to the WAN port, then use static IP user groping, if the following figure.The LAN port settings of the router:After the configuration of the LAN port and the WAN port is completed, we will configure the wireless parameters below. When configuring a wireless router, strictly speaking, there are no steps. The author suggests that the user configure the order in the wireless router configuration page.Wireless configuration:In the basic settings, when the user does not need wireless networks, you can choose to shut down, this function is not currently available in many brands. With 14 channel options, the general brand is mostly 11~13 channel, where you recommend the use of automatic switching the best channel.Wireless encryption is a must, if forget to set a password, is likely to be stolen broadband, and may be intrusion into a computer, if a hacker master, in some Trojan or virus, that is painful. So when you open the wireless network, be sure to remember to modify the wireless encryption. The password setting method is simple, just set a password in the wireless router, and then enter it at the wireless network card.Access control is managed through the MAC address, managed by both permission and prohibition, just like MAC address binding management.Advanced settings suggest automatic selection, such as speed and preamble type.You can see the number of wireless connections in the connection list, including MAC address, status, frequency band, speed, etc..The function interface of the device is all in Chinese, and there are also quick guides and help. As long as you read the instructions carefully, I believe it will not be difficult to set up. After these settings, you can access the Internet by enabling the corresponding wireless network on the PC side.Method two:As more and more friends enter the "wireless" family, the security of wireless networks has attracted much attention. Comparatively speaking, wireless is more difficult to protect than wired networks, because fixed physical access points in wired networks are limited, and any point in the wireless network can be used.So the major brand manufacturers to add the key, ban SSID radio and other means in the configuration design of the wireless router, but these security settings are really effective? The wireless device support IEEE 802.11g standard as an example, based on the results of the way will lead you to question one by one to unlock.Set network keyWireless encryption protocol (WEP) is a standard method of encrypting data transmitted in wireless networks. Most of today's wireless devices only have WEP encryption, and more secure WPA encryption has not been widely used.Currently, there are usually two types of key types for wireless routers or AP. For example, the wireless router used has 64 bit and 128 bit encryption types, each entering 10 or 26 strings as encrypted passwords.Here to remind you that many wireless router or AP in the factory, the data transmission encryption function is closed, if youused to use without further set of words, so your wireless network has become a "undefended" decoration. Therefore, encrypting settings for your wireless network is extremely important.Test results: 64 bit encryption is adopted. In actual measurement, the wireless network is found through Network, Stumbler and other software, but the wireless network cannot be used because the password cannot be obtained.Disable SSID broadcastingIn layman's terms, SSID is the name you give your wireless network. Note that the same manufacturer launched a wireless router or AP use the same SSID, once those who attempt to illegal connection of an attacker using a generic initialization string to connect to a wireless network, it is very easy to set up an illegal connection, so as to give our wireless network threat. Therefore, it is recommended that you have the ability to name SSID as more personal names.Wireless routers generally provide "SSID enabled" capabilities. If you don't want your wireless network to be searched by other people via the SSID name, you'd better prohibit SSID broadcasting". Your wireless network can still be used, but it doesn't appear in the list of available networks that other people have searched for.Tip: after banning SSID broadcast settings,The efficiency of wireless networks will be affected, but inexchange for security improvements, it is still worthwhile.Results: there were no SSID radio, the wireless network is ignored by the wireless network card, especially in the use of Windows XP wireless network management, to achieve the purpose of "to deceive the public.Disable DHCPThe DHCP function automatically distributes IP addresses for each computer in a wireless LAN without the user setting the IP address, subnet mask, and other required TCP/IP parameters. If the DHCP feature is enabled, then others can easily use your wireless network. Therefore, disabling DHCP functionality is necessary for wireless networks.Set the DHCP server to "not enabled" under the "DHCP server" setting item in the wireless router.Test results: you cannot use the network even if you can't find the IP address and the DNB server information, even if you can find the wireless network signal.Enable MAC address and IP address filteringIn the settings of the wireless router, enable MAC address filtering function, it is important to note that in the "rules" must choose "option allows only effective MAC address list in the MAC address is set to access the wireless network" this kind of.In addition, if the wireless LAN is disabled in the DHCP function, it is recommended that you use the wireless service for each computer are set to a fixed IP address, and then the IP address input IP address list allows. The IP address filtering function of the wireless router is enabled, only the IP address in the list of the normal users can access the network, other people can only stare.Results: MAC address filtering and IP address filtering is set up, even though it was barely invasion of the wireless network, but due to the MAC address and IP address filtering function of the wireless router ban, so the wireless network is still unable to use.Sum upIn fact, in the process of measurement, it is found that any of the aforementioned ways can protect your wireless network, so the average user has no need to worry and can use it safely.In addition, if the use of some public wireless network at the airport, meeting rooms and other public places, must remember to close their file and print sharing function, because this kind of shared documents can easily be accessed by another client with a lan.Method three:I. preliminary setting of wireless parametersFrom the management interface to set the bar can be seen in thewireless broadband router in a wireless setting and other settings with cable routing products the same grade as its setting methods are similar, so we only illustrate the wireless settings. With TP-LINKR4x0 series cable broadband router, the original Internet settings you can use the setup wizard, which set the parameters except the last more than a wireless set "a (Figure 2) outside and R410 as like as two peas.The wireless function determines whether the function of the AP is enabled. "SSID" is also abbreviated as ESSID, the identifier character of AP, and sometimes translated into service set identifier or service area identifier",Is used as a validation identifier for accessing the wireless network (which can be imagined as a workgroup name in the windows file sharing environment). When a wireless client wants to join this wireless network, it must have the same SSID number, or it will be shut out". The default is "TP-LINK". It is proposed to change to an unfamiliar name. It can be used as one of the simplest security measures and, of course, the need to ban the use of SSID broadcasts, as discussed below."Frequency band", that is "Channel", is also called channel, and the wireless signal is used as the data signal of transmission medium to transmit channel. IEEE802.11b/g operates in the 2.4 to 2.4835GHz band (China Standard), and these bands are divided into 11 or 13 channels. In WR245, this wireless router can choose 11 bands, and whenthere are more than two AP in the environment or overlap with the neighbor's AP coverage, you need to set different bands for each AP, so as not to conflict. After this setting is complete, the basic network parameters are all set. If the user does not have any security requirements, then the client wireless network card can be connected by default.Two, wireless parameter advanced settingsThe general wireless router and the AP have the following three set items:Chinese nameEnglish nameFunction BriefWireless basic settingsWireless SettingsWireless network parameters, including SSID, channel, security authentication, key and so on. (as shown in Figure 3)MAC address filteringMAC FiltersA measure of access security mechanism that can restrict unauthorized hosts from joining wireless networks (only forwireless network segments) is filtered based on the network card MAC address. (as shown in Figure 5)Host stateClient StateDisplays basic information about all hosts connected to this wireless network, including MAC addresses. (as shown in Figure 4)1. wireless basic settingsMore security mechanisms are set up on this page except for the wireless features that are set up in the wizard, the SSID, and the frequency bands. Among them, if checked "allow SSID broadcast", this router will broadcast to all wireless host's own SSID number, that is to say, not designated SSID wireless network card can get AP broadcast SSID and join. If the user does not want to have another wireless client "uninvited" nearby, it is recommended that this option be canceled and that the same SSID is manually specified in the client network card wireless setting.In the security authentication type, you can choose the open system mode that allows access, the shared key mode based on the WEP encryption mechanism, and the automatic selection method. For security reasons, it is recommended to select the shared key mode.In the key format selection, you can choose the ASCII code orthe 16 hexadecimal number used in the following key. In general, we choose the 16 decimal number (HEX). In the following key information, the content item is free to fill in according to the instructions - "select the 64 bit key, enter the 16 digit character, 10, or the ASCII code character, 5.". Select the 128 bit key, enter 16 decimal characters, 26, or ASCII code characters 13". Then select the encryption number at the key type. You can choose 64 or 128 bits, and select "disable", the key will not be used. It should be noted that at the same time,You can select only one valid key, but you can save up to 4. Moreover, the higher the number of encryption, the lower the efficiency of communication, that is, the connection rate will be affected, so it is recommended in the family WLAN this is less sensitive to the safety of the environment, do not have to choose the number of high encryption.2. host statusThis page can find the host information that joins the wireless network, and, above all, access to its MAC address for use in MAC address filtering.3.MAC address filteringIn this page, the MAC address filtering function defaults to "shutdown". First click the enable Filter button to enable it. In general, we just want to let oneself the client host join the wireless network, then the "filtering rules" and select "allow only......", and click the "add new item" button in the window shown in Figure 6 in just fill in the record MAC address,plus custom description, selection effect, save after the rebound in Figure 5 interface, complete set. Thus, only the MAC address in the table can be accessed by the wireless network card, which is much more secure than the default configuration WLAN.Note: another way to get an MAC address is to run the "ipconfig /all" at the command prompt window of the client system to find the wireless network card name, and the following line "Physical"The MAC address is available in Address.If you are using a pure AP device, just refer to your AP settings as described in this section.Three, wireless network card client settingsAfter setting up the wireless router, especially the wireless security mechanism, it is necessary to modify the parameters of the wireless network card in order to enable the client to join the WLAN. Here in the case of Win2000, windows in the equipment management system, equipment selection of wireless network card installed, and open the "properties" window, click the Advanced tab, you can see the wireless parameters just set in the wireless router in the."ESSID" corresponds to "SSID" in the settings of the wireless router. This must be consistent to connect to the network. When the wireless network card does not manually specify the SSID, it will automatically search for the strongest signal AP andconnect, of course, this AP needs to enable the SSID broadcast function."Encryption."The Level encryption level corresponds to the key type, that is, the number of bits in the WEP shared key. Select the 64 bit (bit) or the 128 bit based on the options you just set up.The following "WEP Key #1 ~ #4" is the 4 WEP shared key, which is specified in accordance with the settings in the wireless router, and in the "WEP Key to"Which key is used in use?. (Figure 8) if the key does not match, the wireless network card client is connected to the network but cannot send and receive data.The "Operating Mode" working model allows two types of network work modes for wireless Adapter (network card): Infrastructure mode and AdHoc mode. If you choose the former, the wireless network card will be connected to a AP (the equivalent of the "client" mode, connect to the AP server on this), if the latter, the wireless network card will be directly connected to another radio station (such as: another wireless network card.In fact, it's a peer to peer model. In the example of this article, Infrastructure mode should be chosen to connect to wireless routers. Moreover, in Infrastructure mode, there is no need to set "Channel", and the "frequency band" or "channel"at this time is automatically detected. Only in AdIn Hoc mode, you need to set the "Channel" value, where all the wireless workstations in the workgroup must have the same channel number and SSID value.There are many wireless card manufacturers for their own product development configuration program, with more comprehensive and advanced settings, security authentication, management functions, and the configuration is also more humane, it is recommended that you use the card with priority configuration program. But the configuration of each manufacturer is different, ask the reader to examine product specification personally.Note: the XP in the network and dial up connections "- the" wireless network connection "and" properties "-" wireless network configuration ", check" with the Windows parameter configuration to configure the wireless network configuration "is my own system using windows, click next to the" configuration "button to set the parameters. And you want to use the adapter configuration program, you need to cancel this check.。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
EMC CONFIDENTIAL—INTERNAL USE ONLY
2
2 – Open Advanced Airport Options
• Select Airport on left • Ensure Airport is OFF • Click Advanced
EMC CONFIDENTIAL—INTERNAL USE ONLY
Configuring Wireless on Mac OS X
Prepared by: Gregory Wong Global Networks &Telecom
EMC CONFIDENTIAL—INTERNAL USE ONLY
Hale Waihona Puke 11 – Open Network Settings
• Click Apple from menu bar • Select System Preferences • Click Network
5
3 – Configure 802.1X Profile
• Click Configure Trust • Select Servers • Click the plus button to add
– * – *
EMC CONFIDENTIAL—INTERNAL USE ONLY
• Once the CORP-W1F1 SSID is found you should be prompted for your credentials
– NT ID – RSA Secure ID token
EMC CONFIDENTIAL—INTERNAL USE ONLY
11
6 – Accept Certificate
3
3 – Configure 802.1X Profile
• Click on 802.1X • Click square on bottom left
– Select “Add Login Window Profile”
EMC CONFIDENTIAL—INTERNAL USE ONLY
4
3 – Configure 802.1X Profile
7
4 – Configure Airport
• Click Advanced once more
EMC CONFIDENTIAL—INTERNAL USE ONLY
8
4 – Configure Airport
• Click Airport • Select Disconnect when logging out • Click OK
• When prompted to accept certificate, Click Continue
• Enter administrator user and password • Click OK
EMC CONFIDENTIAL—INTERNAL USE ONLY
12
6 – Verify Connection & Authentication
EMC CONFIDENTIAL—INTERNAL USE ONLY
13
7 – Troubleshooting
• Verify token is not in “Next Token Mode” or disabled
• Login to https:// while connected with wire
• Successful login will show
• Status : Connected • IP address listed • “Authenticated via PEAP (GTC)” under 802.1X
• If you encounter issues
– Toggle Airport OFF and ON
• Under Authentication
– Uncheck everything except PEAP
• Select PEAP
– Click Configure – Set Outer Identity to ‘anonymous’
EMC CONFIDENTIAL—INTERNAL USE ONLY
EMC CONFIDENTIAL—INTERNAL USE ONLY
9
5 – Apply Configuration & Enable Wireless
• Turn Airport to ON • Click Apply
EMC CONFIDENTIAL—INTERNAL USE ONLY
10
6 – Authenticate
• Toggle Airport OFF and ON
EMC CONFIDENTIAL—INTERNAL USE ONLY
14
THANK YOU
EMC CONFIDENTIAL—INTERNAL USE ONLY
15
6
3 – Configure 802.1X Profile
• Under Wireless Network enter CORP-W1F1 • Select WPA2 Enterprise for Security Type • Click OK
EMC CONFIDENTIAL—INTERNAL USE ONLY