05 U.S. ADS-B Program Activities(EN5)
浅谈ADS-B系统地面站的组建和维护
“ 地面收 发两 用机 ” 。它与数据链接收天线相连 ，能够接 收 ） 空中飞机发送 的 Ａ ． 报文并通过 内置的处理器将其转换 ＤＳＢ 为计算机网络上的 ＵＤ Ｐ协议数据包， 然后通过一个 Ｒ ４ Ｊ ５标
备份，只需要对 服务器上 安装 的操作系统和杀毒软件等进行 定期更新就可 以了。按 照民航行业规范 ，一个 Ａ ． ＤＳＢ地 面 站应当准备一主一备两台服 务器 ， 以有条件 的情况下应当 所 定期进行 主机 与备机的互换 使用 。
客户 端 的 维护 ，硬 件 方 面 跟 一 般 个 人 电脑 并 无 不 同 ，只
模式与 １９ Ｅ ０ ０ Ｓ模式， 而这两种模式 的 ＡＤ ． ＳＢ系统使用不 同 的通 信频率，物理上互不兼容。 但有时候，一个机场可能同时需要对运输航班 飞机和通 用飞机进行指挥， 那就可能要求同时具备 ＵＡ Ｔ与 １９ Ｅ ００ Ｓ两 种模 式 ＡＤＳＢ信息 的接收能力 ， ． 多模式 Ａ ． ＤＳＢ系统就是为 了应 对这种情 况而设计 的。它的基本实现方案是使用各 自独 立 的 Ｇ Ｔ分别接 收 ＵＡ Ｂ Ｔ与 １９ Ｅ ０ ０ Ｓ模式 的信号 ，然后通过
准 的 网 络 接 口将 其 传送 到 计 算 机 网络 上 去 。
其它设备包括服务器 、 监视客户端和网络设备 （ 交换机 、
路 由器 ）等 。
因 １９ Ｅ ０ ０ Ｓ与 Ｕ Ｔ两种模式的 Ａ ． Ａ ＤＳＢ系统工作在不 同
的频率上 （ 前者 为 １９ ＭＨ ，后 者 为 ９ ８ ００ ｚ ７ＭＨｚ ，所 以两 种 ） 系 统 的 地 面 站 是物 理 上 不 兼 容 的 。
个 人可 以很轻松 的随身携带 ０ ３月第 １ １卷第 ０ ３期总第 ２ ２期 ７
基于改进d-s证据理论的ads-b数据质量评估方法
基于改进D －S 证据理论的ADS －B 数据质量评估方法唐鹏（中国民用航空深圳空中交通管理站，广东深圳518128）【摘要】随着ADS －B 逐步作为民航空管监视系统的主要监视手段，为确保民航空管监视系统安全可靠运行，在对监视数据进行融合时必须对ADS －B 数据质量进行分析评估。
根据现阶段ADS －B 运行实际数据的特点，结合空管对ADS －B 数据的运行要求，建立了ADS －B 数据质量评估指标体系。
针对Dempster 合成公式和Yager 合成公式存在的不足，引入证据间相似度来改进证据合成公式，提出了基于改进D －S 证据理论的ADS －B 数据质量进行评估方法。
通过实验表明该方法在一定程度上解决了ADS －B 数据质量评估中证据间冲突的问题，且具有较强的实用性。
【关键词】信息技术质量评估D －S 证据理论广播式自动相关监视合成公式1前言广播式自动相关监视（ADS －B ）是一种航行新技术，并被国际民航组织（ICAO ）确定为未来主要的监视技术［1］，加快推广ADS －B 的应用是我国建设新一代航空运输系统的主要任务之一。
由于ADS －B 技术结合了卫星导航、通信、机载设备以及地面设备等众多先进复杂技术［2］，为确保ADS －B 的安全可靠运行，在空管自动化系统中，对ADS －B 数据进行关联、融合、显示之前，必须对其完整性、可靠性等方面的数据质量进行检测评估。
目前，国内外不少学者在ADS －B 数据质量研究方面做了许多工作，取得的成果为ADS －B 建设奠定了坚实的理论基础和依据。
Mueller ［3］、沈笑云［1］等从统计学的角度对ADS －B 数据中位置信息质量进行了分析，并得到了ADS －B 数据中位置实际误差分布特点。
张军［4］等详细论述了ADS －B 数据评估的原理方法，并结合实际数据给出了数据位置信息误差等评估结论。
倪玉德［5－6］等对ADS －B 数据中位置信息源的可靠性进行了研究。
EDACS
Operator’s ManualEDACS® ALLEGRAVEHICLE HANDSFREE ericssonz2NOTICE!This manual covers Ericsson and General Electric products manufactured and sold byThis manual is published by Ericsson Inc., without any warranty. Improvements and changes to this manual necessitated by typographical errors, inaccu-racies of current information, or improvements to programs and/or equipment, may be made by Er-icsson Inc., at any time and without notice. Such changes will be incorporated into new editions of this manual. No part of this manual may be reproduced or transmitted in any form or by any means, elec-tronic or mechanical, including photocopying and recording, for any purpose, without the express writ-ten permission of Ericsson Inc.Copyright © February 1995, Ericsson Inc.VEHICLE HANDSFREE PACKAGEThe VEHICLE HANDSFREE Package lets you talk on a portable radio in your car without taking your hands off the wheel. Your radio operates as usual, except that you use an external microphone, speaker, and antenna.The HANDSFREE powers the radio and charges its battery (standard or slim-line only).USING YOUR HANDSFREE UNIT INSERTING THE RADIOBefore inserting the radio remove the following:• the round rubber plug in the antenna port on the back of the radio.• the system connector plug from the bottom of the radio.3INSERT THE RADIO INTO THE HANDSFREE HOLDER1. Slide the radio straight down parallel tothe back of the holder.2. Push the radio all the way down tomake sure the system connector is properly seated.3. Push the radio back until the side tabsof the handsfree unit lock into place.4OPERATING INSTRUCTIONS Service Available IndicatorThe indicator light on the top edge of the radio shows a steady green light when service is available from the service net-work.Answering A CallRefer to your radio user’s guide to se-lect an answering option. Most radios have at least three options:• answer with the SEND key• answer with any key except VOL-UME keys• answer automatically after a num-ber of rings Adjusting The Speaker VolumeWhen the radio is in the cradle and turned on, you can adjust the speaker vol-ume using the volume keys. The radio stores two volume settings independently--one for when the radio is used as a port-able, and one for the speaker volume when the radio is in the HANDSFREE unit. Both settings remain unchanged after the radio is turned off.CHARGING YOUR RADIO BATTERYWhen your radio is on and in standby mode in the HANDSFREE unit, the radio battery is automatically charged. You can charge your radio battery by leaving the phone in the cradle overnight. However, continuously charging the battery in this5way for more than a week can temporarily weaken the vehicle battery.• When your radio is in the HANDSFREE unit, the radio dis-play will indicate charge status. Theindicator alternates between C for“Charging” and the charge level (0through 9). When the battery isfully charged, the display shows an“F” for “Full Charge.”• The HANDSFREE unit recharges a standard battery in less than twohours and a similar battery in lessthan an hour.NOTE: Charging pauses when acall is in progress, but a tricklecharge maintains the batterycharge level.• To use your radio in the HANDSFREE unit if the radio bat-tery is completely discharged (i.e., the radio will not turn on), place the radio in the unit and wait 10 min-utes before placing a call.6REMOVING THE RADIO1. To release the radio from theHANDSFREE unit, squeeze the tabson both sides of the holder until theradio tilts slightly forward.2. Slide the radio straight up out of theholder so that the HANDSFREE sys-tem connector detaches from the baseof the phone.7CARE AND MAINTENANCE• Carefully follow the instructions on Inserting and Removing the radiofrom the HANDSFREE unit.• Do not attempt to service the HANDSFREE unit or componentsyourself. Doing so will void the war-ranty.• Follow all safety precautions and user guidelines8TROUBLESHOOTINGRADIO PROBLEM PROBABLE CAUSE REMEDYThe LED does not light when the vehicle power is supplied.The holder is not receivingpower, or vehicle power polar-ity is reversed.Check the power connec-tions and fuse. Be sure theradio battery is charged.The portable radio functions outside the holder, but not in the holder.Radio is not properly seated inthe holder, or the system con-nector contacts are dirty, or theexternal antenna is discon-nected or defective.Be sure the radio is properlyseated in the holder. If sys-tem connector contacts aredirty, carefully clean them.The other party of the radio connection cannot hear sound.The microphone jack is not in-serted into the connection box.Clean the microphone plugand insert it into the connec-tion box.No audio The speaker jack is notinserted into the connectionbox.Clean the speaker plug and insert it into the connection box.9NOTES 101112Ericsson Inc.Private Radio SystemsMountain View RoadLynchburg, Virginia 24502AE/LZT 123 1873 R1A 1-800-528-7711 (Outside USA, 804-528-7711)Printed in U.S.A.。
高二英语人教版 选择性必修四 Unit 5 Learning About Language
4 I have always been passionate about books, so I want to be a librarian . By providing a
Activity 2
Complete the sentences with the correct forms of the words you have learnt in this unit. Circle the part of speech. Then think of more words that can be used in both noun and verb forms.
Activity 3
Use the words in the box to complete the following excerpt from a student’s speech.
commit define
bounce around in common
rather than come tቤተ መጻሕፍቲ ባይዱ a conclusion
rather than on something more meaningful?
commit define
bounce around in common
rather than come to a conclusion
radium
had a great influence on
Please close your eyes and think of someone professional and successful. It could be a famous entrepreneur, a great leader, a scientist or an artist, or a teacher who had a great influence on you. My choice would be Marie Curie, who discovered radium . For me, she is great not just because she was world-famous, but because she made great contributions to mankind. Being a female scientist was much less common in her time, but in spite of this she devoted her life to her career. So I have come to the conclusion that if you want a great career, you need to
04S520
04S5201. IntroductionThe purpose of this document is to provide an in-depth explanation and overview of the 04S520 course. This course is designed as an introductory course in the field of computer science and programming. It covers various foundational topics that are essential for any aspiring software developer or computer science enthusiast.2. Course ObjectivesThe main objectives of the 04S520 course are as follows:•To introduce students to the basic concepts and principles of computer science.•To develop problem-solving skills usingprogramming.•To provide hands-on experience with programming languages and tools.•To enable students to design, implement, and test simple software applications.•To foster critical thinking and analytical skills in the context of computer science.3. Course OutlineThe course is divided into several modules, each covering a specific topic. The following is a brief overview of the main modules in the 04S520 course:Module 1: Introduction to Computer Science•Introduction to computer systems•History and evolution of computers•Basics of computer hardware and software Module 2: Programming Fundamentals•Introduction to programming languages•Basic programming concepts (variables, data types, control flow, etc.)•Writing and executing simple programs Module 3: Data Structures and Algorithms•Introduction to data structures (arrays, linked lists, stacks, queues, etc.)•Algorithms and their analysis•Searching and sorting algorithmsModule 4: Object-Oriented Programming•Introduction to object-oriented programming•Classes, objects, and inheritance•Encapsulation, polymorphism, and abstraction Module 5: Software Engineering•Software development life cycle•Requirements gathering and analysis•Software testing and debugging4. Assessment and GradingThe assessment for the 04S520 course is divided into several components:•Assignments: Regular assignments will be given to students to assess their understanding of the topicscovered.•Quizzes: Short quizzes will be conducted after each module to ev aluate the students’ knowledge retention.•Projects: Students will be assigned small projects to apply their programming skills and demonstrate theirproblem-solving abilities.•Final Exam: A comprehensive final exam will be conducted at the end of the course to assess the overallunderstanding of the subject.The grading for the course will be based on the performance in these assessments, with different weights assigned to each component.5. ResourcesTo support the learning process, the following resources will be provided to students:•Course materials: Lecture slides, notes, and reading materials will be available online for students to access.•Programming tools: Students will have access to programming tools and environments required for thecourse.•Online platforms: Discussion forums and collaborative platforms will be provided to facilitatecommunication and interaction among students.6. ConclusionThe 04S520 course serves as a foundation for further studies in the field of computer science and programming. It introduces students to the basic concepts and principles of computer science while providing hands-on experience with programming languages and tools. By the end of the course, students will have gained a solid understanding of computerscience fundamentals and will be well-prepared to pursue advanced topics in the field.。
SDRplay ADS-B (dump1090) User Guide
Radio Spectrum Processor ADS-B (dump1090) User GuideOverviewThe SDRplay Radio combines together the Mirics flexible tuner front-end and USB Bridge to produce a SDR platform capable of being used for a wide range of worldwide radio and TV standards. This document provides an overview of the installation process and operation of the SDRplay ADS-B(dump1090) application.Dump1090 was originally written by Salvatore Sanfilippo ***************** in 2012 and is released under the BSD three clause license.Malcolm Robb *********************** made a number of improvements in 2014. In this revision of the application, support has been added for the RSP.Oliver Jowett ********************.uk created mutability version including oversampled demod in 2016. Contents1.Installation (2)2.Getting Started (11)3.RSP Command Line Options (13)4.Legal Information (14)1. InstallationDownload the SDRplay ADS-B (dump1090) installer from the Windows section of the website (/downloads)Run the downloaded installation file and you will see this, click Yes to continue.Click Next to continue past the welcome screen.Please read and accept the license agreement.The next screen will display important information about these early releases. Read and then click Next.The next screen shows the installation directory. Check you have enough disk space and then click NextThe next screen confirms where the software will be installed to. If correct, click Install.After the software has installed, there will be some quick tips in the next screen, after you have reviewed these click Next.This completes the installation, clicking Finish will close the installer.This software works well with the Virtual Radar Server software. Virtual Radar Server will collect the data from dump1090 and produce a clickable map that shows all of the aircraft found by dump1090 in real time. You can download it from here: /Download.aspxAfter downloading the software, run it to start the installation.Click Next to continue past the welcome screen.Review and accept the license agreement, then click Next.You can review the change log and then click Next to continue.Review the installation directory and click NextThe next screen allows you to change the port number that the server listens on to receive web requests. You can normally leave this as the default (80) but if it conflicts with another web server you may have on your system, you can change it, then click Next.You can choose which folder to store the programs shortcuts or leave it as the default and click NextThis screen allows you to automatically configure the firewall to allow remote connections. Review this information and then click Next once you have decided on the correct setting.After reviewing the summary of what will be installed, click Install to begin.After the software has installed, click Finish to close the installer.2. Getting StartedThe easiest way to get started is to click on Start dump1090 from the Stat Menu (underSDRplay/dump1090). This will start dump1090 with settings to output the received plane information to the network ports.A receiver should be setup in Virtual Server with the following information:Format: BeastIP: 127.0.0.1 (if dump1090 and virtual server running on the same machine) or set to the IP address of the machine running dump1090Port: 30005 (this is the default output port for beast data)Please note: there are more Start options from the menu, these are 2MHz mode (interactive or quiet) and 8MHz mode (interactive or quiet). Interactive will show the plane information as received but will require more CPU than the quiet mode that just outputs the data to the network port.Whilst this is running, start Virtual Radar Server from the Start Menu. It should automatically connect to the dump1090 application and start to process incoming data.You can now click on the link in blue inside the Virtual Radar window (shown in blue) and it will open up a browser window showing the aircraft being detected on a map.You can change some of the command line options to try to improve the performance to capture more aircraft data. Below are some of the options that relate directly to the operation of the RSP.3. RSP Command Line Options--dev-sdrplay – Must be set for ANY RSP--net – enable networking--modeac – enable decoding of SSR modes 3/A & 3/C--oversample – use the 8MHz demodulator (default: 2MHz demodulator)--rsp-device-serNo <serNo> Used to select between multiple devices when more than one RSP device is present--rsp2-antenna-portA Select Antenna Port A on RSP2 (default Antenna Port B)--rspduo-tuner1 Select Tuner 1 on RSPduo (default Tuner 2 if Master or Single Tuner)--rspduo-single Use Single Tuner mode for RSPduo if available (default Master/Slave mode)--adsbMode Set SDRplay ADSB mode (default 1 for ZIF and 2 for LIF)--enable-biasT Enable BiasT network on RSP2 Antenna Port B or RSP1A or RSPduo Tuner 2--disable-broadcast-notch Disable Broadcast notch filter (RSP1A/RSP2/RSPduo)--disable-dab-notch Disable DAB notch filter (RSP1A/RSPduo)--interactive – display aircraft data in a table in the command prompt--quiet – Disable output to the command promptFor more information contact /support4. Legal Information********************************************************(2012)andisreleasedunderthefollowingBSDthreeclause license.**********************************(2014)madeanumberofimprovements******************************(2016)addedRSPsupportCopyright(c)2012,************************************All rights reserved.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.SDRPlay modules use a Mirics chipset and software. The information supplied hereunder is provided to you by SDRPlay under license from Mirics. Mirics hereby grants you a perpetual, worldwide, royalty free license to use the information herein for the purpose of designing software that utilizes SDRPlay modules, under the following conditions:There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Mirics reserves the right to make changes without further notice to any of its products. Mirics makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Mirics assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters that may be provided in Mirics data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters must be validated for each customer application by the buyer’s technical experts. SDRPlay and Mirics products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Mirics product could create a situation where personal injury or death may occur. Should Buyer purchase or use SDRPlay or Mirics products for any such unintended or unauthorized application, Buyer shall indemnify and hold both SDRPlay and Mirics and their officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that either SDRPlay or Mirics were negligent regarding the design or manufactu re of the part. Mirics FlexiRF™, Mirics FlexiTV™ and Mirics™ are trademarks of Mirics .SDRPlay is the trading name of SDRPlay Limited a company registered in England # 09035244.Mirics is the trading name of Mirics Limited a company registered in England # 05046393。
ads2005a快速入门中文教程
第一章:使用ADS项目当你生成、仿真及分析设计以达到你的设计目标时，ADS使用项目自动组织和存储数据。
一个项目包括电路原理图、布局图、仿真、分析和你创建的设计的输出信息，这些信息通过一些链接可以加到其他设计或项目中。
使用主窗口可以创建和打开项目。
当你运行ADS时这个窗口就会显示。
如下图：创建项目使用主窗口创建项目，然后你可以用来组织你的设计。
一个项目包括电路原理图、布局图、仿真、分析和你创建的设计的输出信息，这些信息通过一些链接可以加到其他设计或项目中。
创建一个项目包括以下几个步骤：打开项目一次只能打开一个项目。
当你开始打开一个项目，在当前打开的项目自动关闭前你会被提示去保存你对它所做的任何修改。
使用下面的方法可以打开一个项目：1. 选择File>Open Project，然后使用对话框定位并打开项目。
2. 使用主窗口上的File Browser栏定位项目并双击来打开它。
共享项目使用主窗口可以重新使用和共享项目而不需要手动包括所有组成项目的个体部分。
1. 添加链接来创建一个分级项目选择File>Include/Remove Projects，然后使用对话框定位并链接到这个项目。
2. 创建拷贝来复制一个项目选择File>Copy Project，然后使用对话框定位并拷贝这个项目。
3. 存档/不存档来转移一个简洁的项目存档文件选择File>Archive Project，然后利用对话框定位并存档项目。
第二章:使用ADS的设计ADS使用设计来存储你达到你设计目标而生成的原理图和布局图信息。
一个设计可以由单个的原理图或布局图组成，或者它可以由许多作为单个设计包含的内部子网络的原理图和布局图组成。
项目中的所有设计都可以直接从主窗口或从一个设计窗口内显示和打开。
在一个设计窗口中你可以：●创建和修改电路图和布局图●添加变量和方程●放置和修改元件、封装及仿真控制器●指定层及显示参数●使用文本和说明插入注释●由原理图生成布局图（及从布局图到原理图）创建一个设计和布局图的基本步骤如图所示：创建设计你可以使用下面两种方法之一创建一个新的设计（布局图）：●选择主窗口上的Window>New Schematic或原理图（布局图）窗口上的File>New Design，然后使用对话框为你创建的文件命名。
Smart Ads插件用户指南说明书
User Guide for MerchantsContentsW HAT I S S MART A DS P LUGIN? (3)S tep 1 – D ownload S mart A ds (6)S tep 2 – R egister (7)S tep 3 – E dit p lugin s ettings (8)YOUR C REDENTIALS (8)SETTINGS F OR O PT I N (8)I w ant m y c ustomers t o o pt i n (8)I o pt i n m y c ustomers (8)REWARDS (10)BRAND A DVERTISEMENT (11)Step 1: T urn b rand a dvertisement o n (11)Step 2: S elect t he b rands y ou p refer t o w ork w ith (11)Step 3: S elect t he b est p ositions i n y our s tore f or a ds (11)EMAIL A UTOMATION (16)CONTACT U S (17)SMART A DS I N T HE E YES O F Y OUR C USTOMERS (18)Step 1: L ogin (18)Step 2: S elect S mart R ewards (18)Step 3: G et d etailed S mart R ewards p rogram i nformation (19)Step 4: E njoy r ewards w ith e very p urchase (21)PORTAL: C reate r ewards (23)PORTAL: C reate E mail C ampaigns (25)PORTAL: C reate E mail T emplates (28)A bout (32)WHAT IS SMART ADS PLUGIN?Smart Engine's Smart Ads plugin is based on an award-‐winning cloud-‐based ad platform that enables merchants, brands, and advertisers to deliver relevant ads and offers to consumers through their eCommerce site, eCommerce checkout, mobile payment platform, and POS/mPOS.As a Magento merchant, you can monetize your webshop, enhance client interaction through email marketing, reward loyal customers, and get paid by premium brands for promotion.Competing with the Amazons of the world isn’t easy but not impossible either. Successful online marketing today depends on timely, relevant ads – creating a personalized customer experience. Satisfied customers are more loyal and generate 30% more sales. Rewards and promotions make them feel special. Loyalty points when shopping with you or special promotions on their birthday are just two examples of how to strengthen customer relationships that have proved successful time and again.An easy solutionThe Smart Ads plugin for Magento offers a powerful reward program, top brand advertising, and email marketing options to monetize your eCommerce site. The positive impact is reflected by:Ø 30% more sales from loyal customersØ 3x better conversion rates with audience targetingØ 20% revenue increase from brand advertisingThe Smart Ads plugin offers you a combination of a powerful rewards program and brands advertising to monetize your eCommerce site.We believe that successful online marketing directly relates to timely and relevant ads. It is all about the personalized customer experience. Satisfied customers are more loyal and generate 30% more sales. Rewards and promotions make them feel special. Offer them to collect loyaltypoints when they shop with you or send them special promotions on their birthday – this will make them come back and stay.You decide to monetize your shop with brand advertising but you don’t have the time and skills to do it? We do it for you. You select the brands you prefer and the best position in your store – landing page, catalog page, product detailed page, top banners, footer – you have the choice. We collect your preferred brand ads and select the most relevant for each visitor in real time utilizing latest machine learning technologies. Our programmatic ads exchange provides up to 3 times better conversion than other ads platforms. It accelerates your shop’s customer experience and creates more loyalty. This competitive advantage directly translates into premium income for you!By using our plug-‐in, you will realize:• 30% more sales from loyal customers• 3 times better conversion rates with audience targeting• 20% revenue increase from brands advertisingThe Rewards componentWe provide you with a solid rewards solution with all functions you need to boost loyalty and retention. You do not have to choose between multiple functionality packages and sophisticated pricing scheme, just to find out that you are being charged for functionality with you never need or you have to become marketing professional or IT geek to be able to use it. Loyalty and rewards only works when it is simple, easy and transparent – for you and for your customers. Based on our years of experience in this field we put together a package for you with includes everything you and your customers will need.Simply use the following features by just a few clicks:-‐Points rewards-‐Welcome offer-‐Earn points offer-‐Redeem points offer-‐Special promotions-‐Audience TargetingPerformance dashboardSmart Ads provides powerful reporting that allows you to view powerful graphs and reports. You choose time ranges and data that you want to see in your reports and Smart Ads does the rest providing you with insights into your customer’s purchasing habits including their earned, bought, redeemed and gifted points.By encouraging customers to stick to your brand and rewarding them with points, for doing so, it’s an easy win-‐win situation for all parties involved. As per multiple studies and reports, 45% of users successfully convert into paying customers within the first minutes of visiting your shop.Brand advertising easy made for youOur SmartAds platform includes an advertising exchange for brand advertising. This makes our platform unique on the market and opens you the way to enter the next level of marketing. Brand Advertising is the key monetization component that is typically available only for big online retailers as the certain reach necessary to make an advertising play work.Before Smart Ads, brand advertising was a premium service for big online retailers with millions of monthly visitors that could afford big upfront investment into agency and technical set up. It’s not a secret that big brands and advertisers are looking to cooperate with shops with millions of monthly visitors. We make it affordable to every Magento merchant.You select the brands you prefer and the best position in your store – landing page, catalog page, product detailed page, top banners, footer at Smart Ads admin page and send us email with your confirmation to allow brand advertising. We collect the brands and agree with you on advertising start time.You receive premium income from brands and provide your customers with personalized experience to discover new products, easily find products they like and buy them.Step 1 – Download Smart AdsTo enjoy Smart Ads, download the extension on the Magento Marketplace.To install Smart Ads, please follow this 3 steps:-‐Step 1: Download the extension in the Magento Marketplace-‐Step 2: Install the extension (like any other extensions) using Magento Web Setup Wizard -‐Step 3: Go to the Smart Ads Admin Page and start configure settingsContact us at ****************************** if you need help.Step 2 – RegisterTo start using Smart Ads, you should register with credentials that you especially define for this extension.Once you have downloaded the extension, you will be redirected to the Smart Ads dashboard where you can enter your username and your password. These credentials are specially defined for Smart Ads.Once you are registered and connected to the extension dashboard, you will be able to see and use all the features.Login for demo merchant:Username: ***************************Password: 123456Complete your company profile at https://smartengine.solutions/ecommerce/. Login with your credentials and fill in company profile information.After logging in with your plugin credentials, you will be redirected to the ‘Profile’ and ‘Finance’ tabs from the top navigation panel. Complete your registration and enjoy Smart Ads!Step 3 – Edit plugin settingsOnce you have downloaded the plugin and registered with your credentials, you can start editing your settings.YOUR CREDENTIALSIn this section you can see what user name and what password you are registered with. If you want to change your credentials, please go to the merchant portal.SETTINGS FOR OPT INThese are settings of your rewards program.I want my customers to opt inOpt – in is the active choice your customer has to make in order to take part in your rewards program. During the first purchase a pop up appears, where the customer needs to agree to Terms and Conditions of your rewards program.I opt in my customers+43 1 919 504 1 100 ****************************** Smart Ads User Guide for MerchantIf you want that your customers automatically take part to your program, you can choose this option. No opt-‐in is required from your customers. They enjoy your rewards program without any extra steps. This option is recommended if your customers already provided their consent to your loyalty activities or if there is no consent legally required at your region of operations.+43 1 919 504 1 100 Smart Ads User Guide****************************** REWARDSYou can create offers for your customers. Decide if you want to let them earn or spend points onyour whole brands or on a particular product. Offer them points for their birthday or to thankthem for their loyalty.Points rewards: You decide how many points are rewarded for money spent or product bought.Welcome offer: You decide what discount or points a customer earns when they sign up.Earn points offer: You decide whether customers can buy loyalty points for specific productor product category and for how much.Redeem points offer: You decide on your premium sales campaigns for your loyal customerswhere they can buy products by paying partially with points.Special promotions: You set special offers on a customer’s birthday or the ability to giftpoints to a friend or earn points for referring a friend when they join the program.Audience Targeting: You set up email campaigns for targeted audience with special promotions.Head over to https://smartengine.solutions/ecommerce/ to create rewards, get customer insightand performance reports.BRAND ADVERTISEMENTStep 1: Turn brand advertisement onWith Smart Ads, you are able to monetize your shop with brand advertising. All you have to do is to choose the brands you would like to work with, we will take care of the rest for you.You will receive income from brands and provide your customers with personalized experience to discover new products, easily find products they like and buy them.Step 2: Select the brands you prefer to work withIn this section you can define and select which brands you want to promote. Type the name in the field, click on add and the brand will appear in the field bellow. You can leave this section open, so that quality brands in your category can participate.Step 3: Select the best positions in your store for adsIn this section you can decide where you want to show the banners.Note, you can change your preferences any time by turning off a previously selected position for ads on your website. If you turn off ads’ position, no further ads will be shown on that position.Based on your preferences defined in this section, we will contact your selected brands and come back to you with the information about the brands that agreed to participate and timing of their ads and places from your selection where they would like to post their ads.If you choose to show banners on the home page:-‐Advertisers can capture your customer’s attention right when he / she starts his / her journey on your homepage at a premium price-‐Banners are shown for registered and non-‐registered users of Smart Ads plug-‐in-‐Mobile: 737 px x 360 px; format: jpg /png; file size: max 200KB-‐Desktop: 1240 px x 675 px, format: jpg /png; file size: max 200KBIf you choose to show banner on the catalog page:-‐Advertisers can bid their products up the catalogues and drive their brands visibility -‐Mobile: generated from existing product images-‐Desktop: generated from existing product imagesIf you choose to show banners on the product detailed page:-‐Advertisers can bid their products to be shown on the first X propositions in the product recommendation lists on the product detailed page and drive their brands visibility-‐Mobile: generated from existing product images-‐Desktop: generated from existing product imagesIf you choose to show banners on the success page top banner:-‐Advertisers can capture your customer’s attention at the end of the purchase process -‐Mobile: 737 px x 500 px; format: JPG, PNG, GIF, HTML5; File Size: Max. 100 kb.-‐Desktop: 600 x 500 px; format: JPG, PNG, GIF, HTML5; File Size: Max. 100 kb.If you choose to show banners on the success page banner:-‐Advertisers can capture your customer’s attention at the end of the purchase process. Up to 3 banners can be enabled-‐Mobile: 737 px x 300 px; format: JPG. File Size: Max. 100 kb.-‐Desktop: 600 x 300 px; format: JPG. File Size: Max. 100 kb.If you choose to show banners on the footer ad:-‐Advertisers can address specific audiences with dynamic banners based on Smart Ads analytics-‐Address specific audiences based on our data and insights-‐Mobile: 737 x 300 px; format: JPG. File Size: Max. 100 kb.-‐Desktop: 1240 x 130 px; format: JPG. File Size: Max. 100 kb.After any changes, do not forget to save your setting by clicking on the “Save Config” button in the right top corner. As soon as you saved it, we will get automatic notification of your choices and will start contacting brands.EMAIL AUTOMATIONThis block is displayed in the admin part of plugin below the ‘Brand Advertisement’ block in the ‘Smart Ads’ configuration page. If you select “I’d love to use email automation”, you will be able design beautiful email templates and send out automatic email campaigns based on the customer actions or lack of action in your webshop.If you select option “I opt-‐in my registered customers for email updates”, your registered customers that provided you with their valid email addresses, will be able to receive your email campaigns.If you select option “I let my shop visitors sign up for email updates”, your visitors will receive an automatic pop up inviting them to sign in for a newsletter.You can design the look and feel of the automatic pop up using the designer form below.CONTACT USDo you have a problem or do you want to get in touch? Confirm your intention to enable brand advertising by sending us a short email. Ask questions and provide us with any additional information, we will contact you as soon as possible.SMART ADS IN THE EYES OF YOUR CUSTOMERSAs a merchant, you can see how the extension looks like for your customers.•For Magento Quality Assurance Tester, please use these credentials: Username: *********************Password: **********************Please proceed as follow:Step 1: LoginTo test Smart Ads from a customer perspective, you can login with the credentials above.Step 2: Select Smart RewardsClick on “Smart Rewards” at the end of the list.Step 3: Get detailed Smart Rewards program informationIn this section you can have an overview of all the features of the Smart Rewards dashboard (see screenshots below).Your loyalty points: In this section, your customers will have a look at their points balance (screenshot 1).Invite your friends: Your customers can invite friends and get e.g. 5 points for each new registration. You can decide how many points you want to offer them for this offer. Customers can invite friends via e-‐mail or via Facebook (screenshot 1).Welcome Discount: You can offer your customers discount for their first purchase. They simply will redeem points during checkout (screenshot 1).Earn Loyalty Points: Every time your customers shop at your store, they will earn loyalty points. You can decide how many points for which purchase amount they will earn (screenshot 1).How to Spend Points: Your customer can spend their points as a real discount (screenshot 1).Earn points with these products: In this section you can choose on which products you want your customers to earn points (screenshot 2).Spend points with these products: In this section you can choose on which products you want your customers to spend points (screenshot 3).Need help? : If your customers have a problem with Smart Rewards, they can contact us any time (screenshot 4).+43 1 919 504 1 100******************************Smart Ads User Guide for MerchantScreenshot 1Screenshot 2Step 4: Enjoy rewards with every purchaseYour customer can choose which color and size they want to order.Screenshot 4Screenshot 3They then click on the cart picture and on …Go to check out“ to proceed to payment.PORTAL: Create rewardsTo complete the payment, customers click on …Place order“.Your customers choose shipping address and specify the shipping and payment method.Smart Ads signals them their points balance and let them choose how many points they want to redeem (e.g 7). The purchase amount will automatically be adjusted when they click on “Redeem points”.Create offers for your customers at merchant portal. After saving, offers appear at your customers’ personal page at your webshop.PORTAL: Create Email CampaignsCreate automated email campaigns for your customers at merchant portal. After saving, campaigns will be automatically sent out to all of your customers on annual basis and to some of your customers based on their actions or lack of actions that you specify as campaign triggers.The ‘Email Campaign’ grid is displayed in three blocks: ‘Customer Lifecycle’, ‘Shopping Cart’ and ‘Annual Campaign’.The email campaign dashboard is your main guide in creating and tracking successful email campaigns. It contains detailed tracking data on how your campaign performs: number of bounced emails, clicks, number of products added to a cart, number of purchases and total purchase amount resulted from a particular campaign.The left column shows three (3) campaign statuses: ‘Running’ – green arrow, ‘Stopped’ – red stop sign and ‘Ended’ – grey arrow.‘Customer Lifecycle’ campaigns are triggered when your customer: (1) registered, (2) subscribed for a newsletter, (3) has a birthday, (4) after X hours / days since your customer last login, (5) after your customer’s first purchase, (6) after your customer’s last purchase, (7) after your customer’s last time viewed product(s) on your website. You can define all or some of those 7 triggers while creating a campaign. You can specify after how many hours, days or even months your campaign shall be triggered after your customer made an eligibility action on your website or after your customer has been inactive on your website.‘Shopping cart” campaigns are triggered when your customer left a cart. You can decide to trigger a campaign only if some particular products are left at a cart, perhaps, because you are trying to sell them faster. Or you can trigger a campaign every time when any of the products are left. This campaign is truly tailored to your customer’s preferences, as it will show them the products they left with a special offer from you.‘Annual campaigns” are triggered at fixed dates of your choice every year. You are only limited with your imagination in specifying those annual events. Is it a Valentine’s day? A special offer day?PORTAL: Create Email TemplatesYour Email Template Creator provides beautiful designs with no coding required. This makes it particularly easy to manage content and layouts for all customers’ lifecycle events.You can access your template creator by clicking on your profile at the right top corner of the merchant portal or by editing your email campaign. After you complete your email template, it’s automatically available at email campaign creation step.To create a new template click on ‘Create Template’ button in the bottom left side of the grid.After saving the template it will be displayed in the list.You can choose to start by modifying our basic template, your previously created template or by creating a new template from scratch.Your Email Template Creator allows you to add and modify any part of your template without any programming effort. After clicking on “Edit” button, simply select a block you wish to edit – it will be highlighted by yellow. Click on “Pencil” button to edit or “Trash bin” button to delete.AboutSmart Engine is an international technology company with offices in New York, Vienna (Austria) and Hong Kong.Our platform, Smart Ads, is an award-‐winning cloud-‐based ad solution that enables merchants, brands, and advertisers to deliver relevant offers and messages to consumers through their eCommerce site, eCommerce checkout, mobile payment platform and POS /mPOS.With Smart Ads, Merchants can compete with the big players in online and offline shopping, significantly increase revenue and create a richer, more relevant customer experience.Do you have any questions? Do not hesitate to contact us:Smart Engine GmbHWienerbergstraße 111100 Wien -‐ AustriaTel: +43 1 919 504 1 100Mail: ******************************www.smartengine.solutions。
商业英语_05Recruitment
Can you just imagine an organization without people?
No employees, no supervisors, no managers, executives, or owners, just pretty tough assignment. Can the company still exist, run or develop without people?
Q2: What is your biggest weakness? ---self-analysis---relation with the job---overcome it/turn to strength “lack of experience”, “too cowardly to do self presentation” “impatience to do things”, “too active/talkative”… Q3: How long do you plan to work in our company? ---Do not say exact time limit, like one, two or five years. ---Working attitude. ---work hard, contribute all the energy to work every day.
13
What is Performance appraisal? Performance appraisal:
a. Upper managers and HRM Dept establish the policies to guide all performance appraisal; b. Employee’s immediate supervisor conducts an employee’s performance.
21版：(步步高) (辽鲁琼) Unit 5 First aid
Ⅰ.阅读理解ACuyahoga Valley National Park Volunteer ProgramBuilding a Community of Park StewardsPosition Title：Wildlife V olunteer—Butterfly Monitors(2 positions)Dates：Mid-May to September,2020Hours：8－16 hours a weekLocation：Cuyahoga Valley National ParkDuties：Park staff will train volunteers in butterfly identification and data recording for one week before volunteers work in a team of two to help track butterfly monitoring areas.The three butterfly monitoring areas in the park are 1 to 2 miles in length and are walked one time per week.Butterflies are identified by using binoculars (望远镜) or by netting and releasing.Data is recorded on data sheets.Skills Required：Applicants must have self-motivation and desire to work with others.V olunteers will work during days when temperature is 70 degrees or more，between 10∶30 am and 5 pm.Ability to walk a long distance in hot and humid conditions is needed.Skills with basic butterfly identification are not a must but helpful.Requirements：Applicants must be current Kent Stale University (KSU) students and a National Park Service Agreement must be completed.U.S citizenship is also required.How to Apply：Please request an application from Mike Johnson at gko v ach@ and send it back to Mike Johnson at gko v ach@，by February 15,2020.If offered an interview，please come to Cuyahoga Valley National Park with your personal resume introducing your education and previous work experience.For further information，please call Jamie Walters at (330) 657-2142 or email j w alters@forc v .语篇解读本文是一篇应用文，主要介绍Cuyahoga Valley National Park招聘志愿者的相关工作要求。
计算机英语学生用书(第二版)习题答案chapter 05.
II. True or False III.Answering Questions IV. Translating Terms
Vocabulary
V. Selecting Words
Collocation Summary
• First generation—— machine language • Second generation—— assembly language • Third generation—— high-level languages • Fourth generation—— very-high-level
5. T
IIV. Exercises—Comprehension
III. Answer the following question.
1. List the five steps of programming.
1. Programming is traditionally a five-step problem-solving process. The five steps are as follows: The first step: Problem definition The second step: Program design The third step: Program coding The fourth step: Program testing The fifth step: Program documentation and maintenance
languages • Fifth generation—— natural languages
ADS2005仿真实验教程09-最终系统和电路仿真
实验九、最终系统和电路仿真概述这是最后一个实验，把课程中的所有电路放在一起：放大器和滤波器。
它们代替了在前面实验中使用的特性（behavioral）系统模型。
任务●在系统中为1900MHz放大器构造一个子电路。
●使用Smart Simulation Wizard（灵活仿真魔术棒）。
●建立一个具有GSM源的谐波平衡仿真，并对它进行仿真。
●用CDMA源建立并运行一个CE仿真。
●运用一个数据显示例子，对ACPR和功率谱进行仿真。
●编程Marker sliders（游标）来规范（customize）数据显示。
●选作：具有最少指示的联合仿真。
目录1.为库创建最终Amp_1900子电路 (148)2.用灵活仿真魔术棒（Smart Simulation Wizard)对AMP_1900进行仿真 (149)3.创建一个由扫描LO的HB（谐波平衡）最终原理图和方程 (153)4.谐波平衡(HB)最终仿真：具有本振功率和噪音扫描的双音分析 (155)5.查看NF,Conv Gain,dbm_out和IF gain并作图 (157)6.最终的包络仿真：CDMA源 (157)7.打开一个DDS的例子，对ACPR和功率谱作图 (158)8.用一个编程的游标(marker slider)作频谱图 (160)9.选作：RF特性系统的联合仿真 (162)步骤1．为库创建最终AMP_1900子电路a．用一个新名AMP_1900保存最后的放大器电路包络设计(ckt_env_gsm)，这个原理图将成为一个你的系统任务中要用到最终的放大器设计。
b．如图所示．删去所有的仿真控制元件、变量、源等。
设置Vdc=5V。
在File>Design Parameters中将元件实例名改为AMP_1900,符号名为SYM_Amplifier。
同时，确定放置端口连结器（port connector）1和2到输入输出端。
检查电路并保存和关闭AMP_1900设计。
05s502
05S502IntroductionThe purpose of this document is to provide an overview and detailed information about the 05S502 project. This document outlines the objectives, scope, stakeholders, and deliverables of the project. It also includes a timeline and resource allocation to help ensure successful completion of the project.ObjectivesThe main objective of the 05S502 project is to develop a new software application that will streamline the inventory management process for a retail company. The application will allow users to efficiently track and manage inventory levels, automate reorder processes, and generate analytics and reports for better decision-making.ScopeThe scope of the project includes the following:1.Developing a user-friendly interface for inventorymanagement purposes.2.Integrating the application with existing ERPsystems for seamless data transfer.3.Implementing automated reorder processes basedon predefined inventory thresholds.4.Generating reports and analytics to help identifytrends and optimize inventory levels.5.Testing and bug fixing to ensure the applicationfunctions as expected.StakeholdersThe stakeholders involved in the 05S502 project are as follows:•Project Sponsor: Mr. John Smith, Vice President of Operations•Project Manager: Ms. Jane Doe•Development Team: A team of software developers and testers•End Users: Employees responsible for inventory managementDeliverablesThe following deliverables are expected to be produced as part of the project:1.Fully functional inventory management application.er documentation and training materials.3.Integration with existing ERP systems.4.Automated reorder processes implemented andtested.5.Analytics and reporting module implemented andtested.TimelineThe project will be divided into the following phases, each with specific milestones and deadlines:1.Planning Phase (2 weeks):–Define project scope and objectives.–Identify and engage stakeholders.–Develop project timeline and resourceallocation.2.Development Phase (8 weeks):–Develop the user interface.–Integrate with ERP systems.–Implement automated reorder processes.–Implement analytics and reporting module.3.Testing Phase (2 weeks):–Conduct extensive testing of the application.–Identify and resolve any bugs or issues.4.Deployment Phase (1 week):–Train end users on how to use the application.–Roll out the application to production.Resource AllocationThe following resources will be allocated for the 05S502 project:•Project Manager: 100% of time for the duration of the project.•Development Team: 4 team members, each dedicated 100% of their time.•Testing Team: 2 team members, each dedicated 100% of their time.ConclusionThe 05S502 project aims to develop a user-friendly and efficient inventory management application for a retail company. By streamlining and automating the inventory management process, the application is expected to improve efficiency, reduce costs, and enhance decision-making. The project will be executed in a phased approach, with clear deliverables, a defined timeline, and allocated resources to ensure successful implementation.。
译林版高中英语选择性必修第二册 UNIT 1
10. specifically (specifical) at us.
Activity 7 长难句分析
1.If an advertisement is placed on a popular website or on TV at peak times,a
huge number of people will know about the product or service it is advertising.
Activity 2 Scanning for the structure Read the text again and write down the main idea of each part. Part 1(Para.1) Introduction Part 2(Paras.2-3) The relationship between advertising and the mass media Part 3(Paras.4-6) Techniques used by advertisers Part 4(Para.7) Future development
to 6. a
brand ambassador.In addition,some advertisements are not so
obvious,in which product 7. placement (place) is typically used.We take in
these marketing messages 8. appearing (appear) in films with huge box-
3.Not only will this make them feel more valued and enable them to see what they are most interested in,but it will also help companies target their customers more efficiently to have a positive effect on sales. [句式分析]本句为not only...but also...引导的两个分句。前半句Not only置 于句首引起 部分倒装 ,what引导 宾语从句 。 [尝试翻译]
ADS-B活动(FAA发布)
Non-Equipped UAT
ADS-R
1090ES Non-Equipped
UAT
1090ES
Radio Station
Radio Station
FIS-B Provider
Control Station
FAA FIS-B Provider
Control Station
FAA
Surveillance of ADS-B equipped aircraft for Air Traffic Control and Aircraft Situational Awareness
LaGuardia (LGA)
Phoenix (PHX) Miami (MIA) Dallas Ft. Worth (DFW) John Wayne Airport (SNA) Washington Reagan (DCA) Houston Hobby (HOU) Houston Intercontinental (IAH)
Key Activities: Develop vehicle ADS-B specification and advisory circular
Perform outreach with airports and vendors Develop compliance monitoring process Perform laboratory testing at WJHTC Perform Site Acceptance Testing for vehicle ADS-B squitters
Cross-Linking of ADS-B data for Aircraft Situational Awareness
UOB INFINITY User Guide
UOB INFINITY User GuideUOB Group l UOB Infinity User Manual User ID ActivationWhat Do You Need to LoginLogin Page (Default View)UOB Infinity Login1Before you login to UOB Infinity for the first time,please ensurethat you have received the two items listed below:1) User ID2)Digital/Physical Token*(required for login to UOB Infinity and toapprove transactions)You can activate your UOB Infinity access online via the login pageupon receipt of your User ID and Security Token.*The physical token will only be issued to users with Global View, Trade subscription and Token Sharing scenario. For other users, you will be able to use our digital token called Infinity Secure. Steps to register and activate Infinity Secure can be found in the “Infinity Secure User Guide”.Self Service Functionsvia Web Browser You can perform the following functions via the UOB Infinity loginpage (applies to both browser/desktop and mobile app):A.Activate your new user ID*B.Recover your password 243A. Activate your new User ID1.You may activate using Infinity mobile app (tap on “ActivateAccount”icon at the bottom right corner of the login screen)orusing desktop browser (click on “Want to activate your newaccount?”).If you do not have a physical token,it is recommended toactivate using Infinity mobile app because you will be ableto setup the digital token upon first time login via Infinitymobile app after the activation is completed.2.Input your Organisation ID and User ID.3.Tick the checkbox to accept Terms and conditions for youruser ID activation.4.Click on the “Next”button.1* Required if you are logging in to UOB Infinity for the first time . 1via Mobile AppActivate using Email and SMS 5.Choose“Use Email and SMS”.Click“Next”.6.Enter the6-digit code sent to the email address registered inyour Infinity user profile.Click“Next”.7.Enter the6-digit code sent to the mobile number registered inyour Infinity user profile.Click“Submit”.8.Set your new passwords and click“Next”to complete thesetup.9.Confirmation message will be displayed on the screen.5678Upon completion of the user activation,if you do not have a physical/digital token,you may log in onto UOB Infinity mobile app using your Organisation ID,User ID and the newly created password.Upon tapping on the“Log In”button,you will be prompted by a message to setup a digital token.Please refer to this user guide to setup your digital token: https:///secure/forms/business/pdfs /infinity-guide-infinity-secure.pdfActivate using Token or Infinity Secure5.Choose “Use Token or Infinity Secure”.Click “Next”.6.Follow the on-screen instructions to generate token responseand input the response to the screen.Click “Next”.7.Set your new passwords and click “Next”.8.Confirmation message will be displayed on the top banner andyou can login into UOB Infinity.5786Login Page (Default View)Account Activation screen (Default View)243B. Recover your password1.Please click on “Have trouble logging in?”2.Input your Organisation ID and user ID.3.Tick the checkbox to accept terms and conditions for your userID activation.4.Click on “Next”button.The subsequent steps will be similar tothe user activation step (refer to page 6and 7).1FeaturesLogin Page (Default View) Note:If you are logging in to UOB Infinity for the first time,youneed to activate your user ID.1.Enter Organisation ID and User ID(you will receive a letter toinform you about your user credentials).2.Input valid password.The“eye”icon enables you to see thepassword that you enter.3.Tick the“Remember Me”checkbox to save Organisation IDand User ID so that,in your subsequent login,you only needto key in your password.4.Upon clicking the“Log In”button:a)If you are logging in for the first time without physical ordigital token,you will be prompted by a message to setupa digital tokenb)If you are logging in using Infinity Secure(digital token),you will see a notice that a push notification is sent toyour mobile phone.c)If you are logging in using a physical token,you will seean on-screen instructions to generate the token response.5.This option will help you to recover your password if you haveforgotten it.nguages available are English,Simplified Chinese or yourlocal language.123456Quick Guide to Login Page。
应用Qt的ADS-B报文解析研究与实现
０ 引言
国际 民航 组织 在 ２０世 纪 ８０年代初 提 出了“自由 飞行”的概念 ，旨在推进全球空管一体化 。广播 式 自动 相关监视技术 （Ａｕｔｏｍａｔｉｃ Ｄｅｐｅｎｄｅｎｔ Ｓｕｒｖｅｉｌｌａｎｃｅ Ｂｒｏａｄ— ｃａｓｔ，ＡＤＳ—Ｂ）是 一种协作相关 的监视 技术 ，它采 用机 载 导航系统获得飞机 精确 的位 置和速 度等 信息 ，利用 机 载 ＡＤＳ—Ｂ设备广播飞机 的位 置信息 和其他一 些参数 ，
收 稿 日期 ：２０１７—０５－０５
修 回 日期 ：２０１７－０６－２０
基金项 目：国家 自然科 学基 金（６１５７１３０９，６１１０１１６１）；辽宁省 自然科
Ｆｉｎａｌｌｙ，ｔｈｅ ＡＤＳ—Ｂ ｍｅｓｓａｇｅ ｄａｔａ ｉｓ ｓｅｎｔ ｉｎ ｒｅａｌ ｔｉｍｅ ｖｉａ ｔｈｅ ＳＢＳ一３ ｄｅｖｉｃｅ ｎｅｔｗｏｒｋ ｐｏｒｔ，ａｎｄ ｔｈｅ Ｑｔ ｐｌａｔｆｏｒｍ ｉｓ
ｕｓｅｄ ｔｏ ｒｅｃｅｉｖｅ ａｎｄ ｐａｒｓｅ ｔｈｅ ＡＤＳ—Ｂ ｍｅｓｓａｇｅ ｄａｔａ．Ｔｈｅ ｒｅｓｕｌｔｓ ｏｆ ａｃｔｕａｌ ｔｅｓｔｓ ａｎｄ ｔｈｅ ｃｏｍｐａｒ ｉｓｏｎ ｗｉｔｈ ｔｈｅ
应 用 Ｑｔ的 ＡＤＳ－Ｂ 报 文 解 析 研 究 与 实 现
ADSelfService Plus权限指南说明书
Required privileges and permissionsTable of contentsDocument summary ADSelfService Plus overview Required permissions Configuring permissions 1 1 2 3 3 8 12 13 14 1518 19 21To delegate full control in ADUC to access all ADSelfService Plus features To delegate the right to reset user passwords in ADUCTo delegate the right to unlock user accounts in ADUCTo delegate the right to modify user attributes in ADUCTo delegate the right to read user PSO in ADUCTo delegate the right to modify members of a group in ADUCTo delegate the right to create a computer account in ADUCTo delegate the right to modify user logon script path in ADUCTo view deleted users reportTo install Windows login agent To perform other actions 21 22 17To synchronize AD user objects with ADSelfService PlusDocument summaryThis guide will walk you through the process of delegating an Active Directory user account with the required permissions for using the self-service features in ADSelfService Plus. ADSelfService Plus does not require "Domain Admin" membership in order to allow users to reset their passwords, unlock their accounts, update their profiles, or access any of its other features. Based on the principle of least privilege, you can delegate only the permissions required for the self-service operations to a user account manually.If you don't provide any authentication details while adding domains, ADSelfServicePlus will get its privileges one of two ways:●If ADSelfService Plus is installed to run as a console application and no credentialsare provided, then by default it uses the permissions of the user who installed theproduct.●If ADSelfService Plus is installed to run as a service and no credentials are provided,then by default it uses the permissions of the account used to run the service. ADSelfService Plus overviewManageEngine ADSelfService Plus, an integrated Active Directory self-service password man-agement and single sign-on solution, helps reduce password reset tickets and spares end users the frustration caused by computer downtime. It o ers,Self-service password reset and account unlockPassword and account expiration notifierPassword policy enforcerEnterprise single sign-on and password synchronizerEndpoint multi-factor authentication for machine loginsDirectory self-update and employee searchThese features, designed to strike a balance between ensuring network security andease-of-access, warrants improved ROI, and a productive IT workforce.Configuring permissionsTo access all ADSelfService Plus featuresFor users to access all features of ADSelfService Plus, you'll need to grant the ADSelfService Plus service account the following permissions:1.Right-click the domain in ADUC and select Delegate Control from the context menu.2.Click Next in the welcome dialog box.3.Click Add to select the user account or service account, then click OK followed by Next.4.Select Delegate the following common tasks and check the Reset user passwords andforce password change at next logon, Read all user information, and Modify themembership of a group boxes, then click Next.5.Click Finish and repeat steps 1-3.6.Select Create a custom task to delegate and click Next.7.Select Only the following objects in the folder. In the given list,select UserObjects.8.Select the General box. Under Permissions,check the boxes for Read and Write beforeclicking Next.9.Click Finish and repeat steps 1-3.10.Select Create a custom task to delegate and click Next.11.Select Only the following objects in the folder. In the given list, select ComputerObjects and Create selected objects in this folder.12.Select the General box. Under Permissions, check Read before clicking Next.13.Click Finish and repeat steps 1-3.14.Select Create a custom task to delegate and click Next.15.Select Only the following objects in the folder. In the given list, selectmsDS-PasswordSettings objects and msDS-PasswordSettingsContainer objects. Click Next.16.Select the General box. Under Permissions, check Read before clicking Next.17.Click Finish.Self-service password resetI n order for this feature to work, you need to delegate the permission to reset users' passwords in the ADUC console. To do this, follow the steps below:1.Right-click the OU or domain in ADUC and select DelegateControl from2.Click Next in the welcome dialog box.3.Click Add to select the ADSelfService Plus user account or serviceaccount, then click OK.4.Click Next.5.Select Create a custom task to delegate and click Next.6.Select Only the following objects in the folder. In the given list, selectand click NextUser objects7.Check the General and Property-specific boxes.8.Under Permissions, check the boxes for Reset password,Read pwdLastset,and Write pwdLastset before clicking Next.9.Click Finish.Note: This permission only enables password reset.Self-service account unlockFor this feature to work, you need to delegate the permission to unlock users' accounts in the ADUC console. To do this:1.Right-click the OU or domain in ADUC and select Delegate Control from thecontext menu.2.Click Next in the welcome dialog box.3.Click Add to select the ADSelfService Plus user account or service account,then click OK.4.Click Next.5.Select Create a custom task to delegate and click Next.6.Select Only the following objects in the folder. In the given list, check Userobjects and click Next.7.Check the General and Property-specific boxes.8.Under Permissions, check the Read lockoutTime and Write lockoutTime boxesand click Next.9.Click Finish.Note: This permission only enables account unlock.Directory self-updateTo utilize this feature, you need to delegate the permission to modify user attributes in the ADUC console. Follow the steps below to do so:1.Right-click the OU or domain in ADUC and select Delegate Control from thecontext menu.2.Click Next in the welcome dialog box.3.Click Add to select the user account or service account, then click OK .4.Click Next .5.Select Create a custom task to delegate and click Next .6.Select Only the following objects in the folder . In the given list, select User objectsand click Next .7.Check the General and Property-specificboxes.Under Permissions, check the Read and Write boxes (or select the Read and Writeboxes of specific attributes that need to be available for end user self-update), andclick Next.Click Finish .Note: This permission only enables self-update.8.9.Display fine-grained password policyIf you want to display the exact password policy requirements in the reset/ change password screen for users with fine-grained password policy enabled, then you need to delegate the permission to read the users' Password Settings Objects (PSOs) in ADUC. Follow the steps below to do this:1.Right-click the OU or domain in ADUC and select Delegate Control from thecontext menu.Click Next in the welcome dialog box.2.Click Add to select the user account or service account, then click OK.3.Click Next.4.Select Create a custom task to delegate and click Next.5.Select Only the following objects in the folder. In the given list, selectmsDS-PasswordSettings objects and msDS-PasswordSettingsContainer objects before clicking Next.7.Check the General box.8.Under Permissions, select Read and click Next.9.Click Finish.Note: This permission only fetches the password policy.Self-service mail group subscriptionTo use this feature, you need to delegate the permission to modify members of a group in the ADUC console. Follow the steps below to do so:1.Right-click the OU or domain where the group containing members that requiremodification belongs in ADUC, and select Delegate Control from the context menu.2.Click Next in the welcome dialog box.3.Click Add to select the user account or service account, then click OK. Click Next.4.Select Create a custom task to delegate and click Next.5.Select Only the following objects in the folder. In the given list, select Group objectsand click Next.Synchronizing AD user objects with ADSelfService PlusTo synchronize Active Directory objects with ADSelfService Plus without any issue,you need to provide the Replicate Directory Changes permission to the user or serviceaccount used in ADSelfService Plus. To do this, follow the steps below:1.In the ADUC console, right-click the domain or OU and select Properties.2.Under the Security tab, click Add to select the user or service account.3.In the Permissions section, Allow the Replicate Directory Changes permission.4.Click OK.8.Click Finish.Note: This permission only enables mail group subscription.Single sign-on to ADSelfService Plus via NTLMv2For this feature to work, you need to delegate the permission to create and readcomputer accounts in the ADUC console. To do this, follow the steps below:1.Right-click the Computers OU or domain in ADUC and select Delegate Control from thecontext menu.2.Click Next in the welcome dialog box.3.Click Add to select the ADSelfService Plus user account or service account, then click OK.4.Click Next.5.Select Create a custom task to delegate and click Next.6.Select Only the following objects in the folder. In the given list, select Computer objects andCreate selected objects in this folder and click Next.7.Check the General box.8.Under Permissions, check the Read box and clickNext.9.Click Finish.Note: This permission only enables you to configure NT LAN Manager (NTLMv2) SSO to ADSelfService Plus.Force enrollment using a logon scriptTo use this feature, you need to delegate the permission to modify the user scriptPath in the ADUC console. Follow the steps below to do this:1.Right-click the OU or domain in ADUC and select Delegate Control from thecontext menu.2.Click Next in the welcome dialog box.3.Click Add to select the user account or service account, then click OK.4.Click Next.5.Select Create a custom task to delegate and click Next.6.Select Only the following objects in the folder. In the following list, check Userobjects and click Next.7.Check both the General and Property-specific boxes.8.Under Permissions, check the Read scriptPath and Write scriptPath boxes andclick Next.9.Click Finish.Note: This permission only enables logon script path modification.To view a deleted users reportThe minimum requirement to view this report is membership in the Domain Admins group.To perform GINA installationThe minimum requirement to perform GINA installation from ADSelfService Plus' web console is membership in the Domain Admins group.If Domain Admin credentials are not available for use,you can install GINA manually via Group Policy Objects (GPOs) or using System Center Configuration Manager (SCCM).Folder permissions for other actionsThe service account used to run ADSelfService Plus and the local user account used to start ADSelfService Plus must be granted full control permission to the product installation folder. Otherwise, you won't be able to:●Install service packs●Generate reports●Start up the product●Apply licenses●Update dashboard graphs●Back up and restore data●Display employee photos and offer users self-update optionsTo configure high availabilityThe minimum requirement to configure high availability in ADSelfService Plus is membership in the Domain Admins group. Domain Admin privileges are only mandatory during the initial setup of high availability. Once high availability has been configured, the service account can be changed to one with lesser privileges based on other features configured. Ensure that folder sharing between both the instances is uninterrupted.Our ProductsAD360 | Log360 | ADManager Plus | ADAudit Plus | RecoveryManager Plus | M365 Manager Plus https:///products/self-service-password。
策划英语活动方案的主题
策划英语活动方案的主题I. Introduction (200 words)A. Brief explanation of the importance of promoting health and wellness in today's societyB. Overview of the English activity program to be proposedC. Purpose and objectives of the programII. Background (400 words)A. Discussion on the current state of health and wellnessB. Key factors affecting health and wellness, including sedentary lifestyle, unhealthy diet, and lack of physical activityC. Need for a strategic approach to improve health and wellness III. Rationale for English Activities (300 words)A. Explanation of the significance of incorporating English language learning with health and wellness initiativesB. Benefits of learning English for personal and professional developmentC. Integration of language skills (listening, speaking, reading, and writing) through activities focused on health and wellnessIV. Activity Program Objectives (400 words)A. Clear and measurable objectives for the program, such as:1. Promote physical activity and encourage participants to adopt an active lifestyle2. Develop English language skills of participants through engaging activities3. Create awareness about healthy eating habits and the importance of nutrition4. Foster a sense of community and collaboration among participantsV. Target Audience and Implementation (500 words)A. Identification of the target audience for the program (e.g., school students, community members, employees)B. Strategies for implementation, including partnerships with schools, community organizations, or corporate sponsorsC. Detailed plan for organizing and scheduling activities, considering timeframes and available resourcesD. Assessment and monitoring mechanisms to evaluate the effectiveness of the programVI. Activity Ideas (2000 words)A. Creative and engaging activity ideas to promote health, wellness, and English language learning, such as:1. English language games related to physical activity, nutrition, and healthy habits2. Collaborative projects to create English-language health and wellness brochures, posters, or videos3. Outdoor activities incorporating English vocabulary related to nature, exercise, and sports4. Workshops and lectures on health topics delivered in English, facilitated by professionals5. Cooking sessions using healthy ingredients and recipes, with instructions given in EnglishVII. Resources and Materials (400 words)A. List of resources required for the implementation of the program, such as sports equipment, teaching materials, and guest speakersB. Strategies for obtaining necessary resources, including partnerships or sponsorships with local businesses or organizationsC. Administration and logistical considerations, including venue selection, transportation arrangements, and budget planning VIII. Promotion and Marketing (300 words)A. Creation of promotional materials, such as brochures, posters, or social media ads emphasizing the benefits of participating in the programB. Engaging with local media outlets to raise awareness and attract participantsC. Utilizing online platforms and social media to publicize the programIX. Conclusion (200 words)A. Recap of the proposed English activity program and its potential impact on promoting health and wellnessB. Importance of continuous evaluation and improvement of the program to ensure its effectivenessC. Call to action, inviting stakeholders to support and collaborate in the implementation of the program.(Note: The word count of this outline is 3,000 words, but the actual content of the plan is expected to exceed the 6,000-word requirement.)。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Federal Aviation Administration
9
Gulf of Mexico ADS-B Coverage – Low Altitude
Federal Aviation Administration
10
Gulf of Mexico ADS-B Coverage – FL280
Federal Aviation Administration
ADS-B WAM
Federal Aviation Administration 7
Williams Mountain
•Solar Panel
Federal Aviation Administration
8
Alaska Benefits Summary
• More efficient routes in adverse weather • Access to lower altitude routes • Improved search and rescue services • Increase access to remote villages (commercial and medevac)
Federal Aviation Administration 14
U.S. ADS-B Final Rule: Overview
• On May 27, 2010, the FAA published the U.S. Final Rule for ADS-B Out equipage
– Mandates performance requirements for ADS-B avionics that will be required to fly in certain U.S. airspace by 1-Jan-2020 – ADS-B Out transmits location information received from a Global Navigation Satellite System -- rule does not preclude other navigation source methods – Rule does not mandate ADS-B In
17
Status: Avionics Upgrades
Carrier JetBlue United USAir Aircraft Type(s) A320 747 A330-300/200 Quantity 35 12 (ADS-B In) Scope U.S./European rule-compliant ADS-B Out avionics (DO-260B) ITP installations (ADS-B In) and DO-260B ADS-B Out
Nov2007 - Oct 2008
Jul 2010 – Jan 2020
Final Rule
May 2010
= Completed
= In Process
Federal Aviation Administration
4
Implementation Status
April 2012
•/nextgen/flashmap/
Ground Infrastructure Deployment Avionics Equipage
Avionics Equipage
Preliminary Rulemaking
Apr – Sep 2006 Oct 2007
Rulemaking Notice
Aviation Rulemaking Committee Recommendations
• Fiscal Year-End Plan for 2012 – 500 Radio Stations • 385 Operational Radio Stations
May 2012 Alaska Route Coverage (18,000ft MEA)
Multiple sites coverage Single site coverage No coverage
RTCA MOPS
FAA TSO
MOPS = Minimum Operational Performance Standards TSO = Technical Standard Order AC = Advisory Circulars Federal Aviation Administration
Note: 1090MHz ES link is required above FL180
Federal Aviation Administration 16
Standards and Guidance Flow
FAA - AC (90 Series) Advisory only: Applicant isn’t required to comply
Federal Aviation Administration
3
U.S. ADS-B Strategy
Ground Infrastructure
Feb 2006 - Aug 2007 Feb 2008 - Apr 2010 Nov 2009 Apr 2010 Sep 2010
Acquisition Planning & Execution
Program Management Organization U.S. ADS-B Program Activities
Federal Aviation Administration
Presented to: New Technology Workshop
By: Doug Arbuckle, Chief Scientist &Int’l lead Surveillance and Broadcast Services June 6, 2012
Deploy & Test Ground Infrastructure
Initial Operating Capability
Apr 2010
In-Service Decision
4
Safety Case Analysis
Safety Case Approval
• A new Aviation Rulemaking Committee (ARC) was chartered in June 2010 to address ADS-B In strategy
Federal Aviation Administration
15
ADS-B Final Rule: Required Airspace (In Green)
11
North Padre 975 (ADS-B and AWOS)
1090 Antennas
UAT Wind Sensor VHF
Comm Room
Automatic Weather Observation System (AWOS) Sensor Suite
Federal Aviation Administration 12
Federal Aviation Administration
6
Juneau ADS-B and WAM Coverage
Coverage: 500 ft to 13,000 ft MSL Equipment: 14 Remote Units ADS-B Equipment 3 Radio Stations
20 (ADS-B In U.S./European rule-compliant ADS-B Out and Out) avionics (DO-260B) and ADS-B-In avionics compliant with DO-260B 143 54 U.S./European rule-compliant ADS-B Out avionics (DO-260B) U.S./European rule-compliant ADS-B Out avionics (DO-260B) OR U.S. rule-compliant ADS-B Out avionics (DO282B) Upgrade existing DO-282A installations to U.S. rule-compliant ADS-B Out avionics (DO282B)
Federal Aviation Administration 2
Why ADS-B?
• Enables NextGen applications via ADS-B-In • Surveillance coverage in regions where radar is impractical or too expensive • Post-2020, allows FAA to divest approximately 175 secondary surveillance radars (lifecycle cost savings)
(Written by Flight Standards)
Provides guidance on operational requirements for the equipment Provides guidance on how to install the equipment in order to get an airworthiness certification Provides a “recipe” for producing equipment that meets regulatory requirements, typically by “invoking” all or part of the RTCA MOPS Defines minimum requirements for the avionics and determines test criteria used to ensure the equipment meets the standards