汽车常用工作液的使用与更换流程

汽车常用工作液的使用与更换流程
1.汽车机油需要定期更换。

Car engine oil needs to be replaced regularly.
2.更换机油时，先将旧油放出。

When changing the oil, first drain the old oil.
3.用准确的容器接住旧油以便回收。

Use a proper container to catch the old oil for recycling.
4.找到机油滤清器并更换。

Locate the oil filter and replace it.
5.涂抹新机油在滤清器上。

Apply new oil to the filter.
6.安装新的机油滤清器。

Install the new oil filter.
7.打开机油箱盖子。

Open the oil cap.
8.倒入正确型号的新机油。

Pour in the appropriate type of new oil.
9.使用量杯检查机油是否达到标准。

Use a dipstick to check if the oil is at the correct level.
10.关上机油箱盖子并启动引擎。

Close the oil cap and start the engine.
11.检查有无机油泄漏。

Check for any oil leaks.
12.确保机油更换完毕。

Ensure that the oil change is complete.
13.制动液需定期更换。

Brake fluid needs to be replaced regularly.
14.找到制动液桶并打开。

Locate the brake fluid reservoir and open it.
15.用抽水器抽出旧制动液。

Use a pump to extract the old brake fluid.
16.清洁容器并倒入新的制动液。

Clean the container and pour in the new brake fluid.
17.确保新制动液的型号符合要求。

Ensure that the new brake fluid meets the specifications.
18.关上制动液桶盖子。

Close the brake fluid reservoir cap.
19.按照制动液系统的说明添加新液体。

Follow the instructions for bleeding the brake system. 20.检查制动踏板感觉是否正常。

Check if the brake pedal feels normal.
21.涡轮增压汽车需要定期更换涡轮增压器润滑油。

Turbocharged cars require regular replacement of the turbocharger lubricant.
22.找到涡轮增压器上的润滑油螺丝并拧开。

Locate the lubricant screw on the turbocharger and unscrew it.
23.用抽水器抽出旧的润滑油。

Use a pump to extract the old lubricant.
24.清洁润滑油螺丝及周围区域。

Clean the lubricant screw and the surrounding area.
25.倒入适量的新润滑油。

Pour in the appropriate amount of new lubricant.
26.关上润滑油螺丝。

Close the lubricant screw.
27.启动引擎并让车辆怠速。

Start the engine and let the vehicle idle.
28.检查有无润滑油泄漏。

Check for any lubricant leaks.
29.涡轮增压器润滑油更换工作完成。

The turbocharger lubricant replacement is complete.
30.冷却液需要定期更换。

Coolant needs to be replaced regularly.
31.找到散热器的冷却液盖子并打开。

Locate the coolant reservoir cap and open it.
32.将冷却液放出。

Drain the coolant.
33.清洁冷却液盖子和周围区域。

Clean the coolant cap and the surrounding area.
Pour in the appropriate amount of new coolant.
35.关上冷却液盖子。

Close the coolant reservoir cap.
36.启动引擎并让车辆怠速。

Start the engine and let the vehicle idle.
37.检查有无冷却液泄漏。

Check for any coolant leaks.
38.确保冷却液更换完毕。

Ensure that the coolant replacement is complete.
39.玻璃清洁液需要经常补充。

Windshield washer fluid needs to be topped up regularly.
40.找到玻璃清洁液桶并打开。

Locate the windshield washer fluid reservoir and open it.
Pour in the appropriate amount of washer fluid.
42.关上清洁液桶盖子。

Close the washer fluid reservoir cap.
43.测试喷水器是否工作正常。

Test if the washer sprays properly.
44.确保清洁液更换完毕。

Ensure that the washer fluid replacement is complete.
45.变速箱油需要定期更换。

Transmission fluid needs to be replaced regularly. 46.找到变速箱油检查口并打开。

Locate the transmission fluid dipstick and open it. 47.用抽水器抽出旧的变速箱油。

Use a pump to extract the old transmission fluid.
48.清洁变速箱油检查口及周围区域。

Clean the transmission fluid dipstick and the surrounding area.
49.倒入适量的新变速箱油。

Pour in the appropriate amount of new transmission fluid.
50.关上变速箱油检查口。

Close the transmission fluid dipstick.
51.测试变速箱工作是否正常。

Test if the transmission operates properly.
52.确保变速箱油更换完毕。

Ensure that the transmission fluid replacement is complete.。