主机安装合同范本 中英文对照

合集下载
  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

于_______年_______月_____日,XX有限公司(简称甲方)与XX有限公司(简称乙方),签订安装主机的项目合同。

1.安装工程名称:211X-54D型主机。

2.工程地点:甲方__________港口。

3.工程范围:本合同所附图纸及估价单。

4.完工期限:本安装工程将配合甲方____________在甲方港口建造工程完工后六十(60)天内,完成安装工程,其中包括211X-54D主机试验运行。

5.安装工程总价格:________美元整。

6.安装工程付款进度:
第一期:甲方在本合同开始实施时,付给乙方工程总价15%,即________美元整。

第二期:甲方在A港口造船工程开始时,付给乙方工程总价15%,即_________美元整;
第三期:在安装管路时,甲方付给乙方工程总价的10%,即__________美元整。

第四期:在主机的主要设备运抵工地时,甲方付给乙方工程总价的40%,即
____________美元整;
第五期:在安装工程完毕时,甲方付给乙方工程总价的10%,即________美元整;
第六期:在工程验收合格后,甲方付给乙方工程总价余额的10%,即__________美元整。

7.违约罚款:因乙方原因未准时完工时,应由乙方负责,应付违约罚款,每天按总价的1%计算,即________美元整。

8.增加或减少工程:若甲方需修改、增加或减少其工程计划时,总价之增减,应按双方规定之订单计算。

若需新增加工程量,双方应另行协商该项新增加工程之单价。

若甲方因修改原计划而将已完工部分工程或已运抵工地之材料弃置,甲方在验收后,应按双方规定的单价对乙方已完成的工费用及材料费,予以支付。

9.监督进度:甲方派去的监督人员或代表对工程进度予以监督并有权予以监工、指导。

乙方应按甲方人员或代表的指示正确施工,不得以任何借口置之不理。

10.工程停工:若甲方通知乙方将工程停止,其原因又并非是乙方的责任,乙方可停止工程并要求甲方按照已完成工程的数量、运抵工地的材料及其他合理费用,在已交款中增付或扣除。

11.工程监护:在工程开始后,但在完工移交前,已完工的工程及留在工地的材料、工具、设备等,均由乙方保管。

除人力不能抵抗的灾害外,乙方应对保管中的一切,负损害之全责。

如遇不可抵抗的天灾人祸,乙方应详列损害实情,向甲方提出恢复原状的价格及日期。

以供甲方核对付款之用。

若甲方决定不再继续施工,按合同第10条规定结束。

12.工程保险:除天灾或因甲方使用不当的原因外,乙方应在甲方验收后保证工程质量良好一年。

13.附加条款:在工程进行中,若因乙方的过错,使甲方或其他人员受到伤害,乙方应负责赔偿。

但如果伤害原因是由甲方或与甲方订约之其他工程人员的过错所造成,则应由甲方完全负责。

14.附件:本合同附件应视为本合同的一部分,与其他条款有同等效力。

附件包括:(1)图样;(2)估价单。

15.合同形式:本合同一式两份,甲乙双方各执一份。

另各保留两份副本供双方
存档备查。

16.附加条款:主机的保养——乙方应在甲方验收后,提供免费及定期对211X -54D主机保养服务一年,每六(6)个月派员一次维护正常运行。

本合同按双方所签日期生效。

甲方:________ 乙方:________
由:________ 由:________
地址:____________ 地址:________
CONTRACT FOR PROJECT INSTALLATION
This Contract for project of installing Main Engine is made
on____, 19____, by and between XX Company Ltd. (here-
inafter called Party A) and DEDY Company Ltd. (hereinafter called Party B).
1. Name of installation work: Main Engine of Type 211X-
54D.
2. Location of installation work: Party A's __________
in Port A.
3. Scope of installation work: As specified in the drawings
and statement attached.
4. Time limit for completion:
The installation work shall cordinate with the construction
of_______in Party A, and shall be completed, including the trial run for Main Engine of Type 211X-540, within 60 (sixty) days after the completion of_______。

5. Total price of installation work: _______U. S. D only.
6. Payment terms of installation work:
First installment:
Party A shall pay to Party B fifteen percent of the total price for installation work, i. e. _______U. S. D only, when this contract comes into effect.
Second installment:
Party A shall pay to Party B fifteen percent of the total price for instalation work, i. e _______U. S. D. only, at the com- mencement of construction installation.
Third installment:
Party A shall pay to Party B ten percent of the total price
for installation work, i. e. _______U. S. D. only, during
the installation of pipes.
Fourth installment:
Party A shall pay to Party B forty percent of the total price for installation work, i. e. _______U. S. D. only, at the time when the main equipment arrives at the site.
Fifth installment:
Party A shall pay to Party B ten percent of the total price
for installation work,i. e. _______U. S. D. only,upon comple- tion of the installation work.
Sixth installment:
Party A shall pay to Party B ten percent of the difference of the price for installation work, i. e. _______U. S. D. only,after the work received has been proved qualified.
7. Penalty for default:
In the event Party B shall fail to complete the work in time
owing to reasons that Party B shall be held liable, Party B shall pay a penalty for such default based on one out of a thousand of
the total price for installation work per day , i. e. _______U.
S. D. only for each day of such default.
8. Increase or decrease of work:
In case Party A has to amend, increase or decrease the work-
ing schedule, the corresponding increase or decrease of total price shall be evaluated according to the terms and conditions between
the two Parties, Should the work be increased, the Parties shall enter into an agreement for the unit price of additional items. Should any part of the completed work of any part of the materi-
als transported to the site have to be abandoned owing to amend- ment made by Party A, Party A shall, after having received the work, pay for each completed work or materials abandoned as per
the unit price specified to Party B.
9. Supervision for progress:
The supervision personnel appointed by Party A and its rep- resentative shall have the authority to supervise the progress of work and give instruction. Party B shall perform correctly in ac- cordance with such instruction given by Party A's personnel or representative.
lO.Stopage work:
Should Party A notify Party B to stop the work for reasons
beyond the responsibility of Party B, Party B can stop the work and claim from Party A the price of finished work, materials at site and other reasonable expenses to be added or deducted from
the paid installments.
11 . Custody of work:
The completed work and the materials, tools, and equipment
at site shall be under the custody of Party B after commencement and before completion and delivery of the work. Unless in the
event of Force Majeure, Party B shall be fully responsible for any damage of the work under the custody of Party B. In case of
Force Majeure, Party B shall give a list of damage according to the actual condition and suggest an expected price and date for recovery from such damage to Party A for checking and pay-
ment. Should Party A decide not to continue with the work, this contract shall be terminated according to article lO hereof.
12. Warranty for work:
Party B shall warrant the promised condition of the work
within one year after the date of receiving the work by Party A. However, Party B shall not be liable to Acts of God or misuse of the work by Party A.
13. Supplemental provisions:
Party B shall be held responsible if Party A's personnel or
other people is injured due to the negligence of Party B during the progress of construction. However, such responsibility shall rest upon Party A if the injury caused is due to the negligence of Party A of technicians contracted with Party A.
14. Attachments:
Attachments shall become an integral part of this contract
and shall be as effective as any other provisions. Attachments in- clude: (1) Drawings, (2) An estimate of cost.
15.Format of this contract:
The contract shall be in duplicate with two texts to be held separately by the Parties hereof. Each of the Parties shall also keep two copies of the contract for record.
16. Additional Provision:
Maintenace of Main Engine:
Party B shall provide free periodic maintenance service for
the Main Engine of type 211X-54D for a year after the receiving
of the work by Party A and send maintenance personnel every 6 (six) months for performing maintenance.
This contract has been executed by the Parties as of the day
and year first above written.
Party A; Party B:
by: by: Address: Address:
合同的订立方式具体包括了书面形式、口头形式以及其他形式等等,但不管是以哪种方式来订立合同的,此时都有一些事项是需要当事人了解注意的。

第一、注意用词严谨
例如合同中常见的约定:“合同在双方签字盖章后生效。

”但是一方只签字没有盖章,在法院对方就可能会提出由于合同只签字没有盖章,因此合同还未生效的主张。

因此此处应当约定:“合同在双方法定代表人或授权人签字或单位盖章后生效。


第二、注意合同名称与合同内容是否一致
有些公司使用合同统一文本,这本是好事,但由于对合同性质了解不细,会出现张冠李戴的事情。

例如本是加工承揽合同,却使用买卖合同文本,为合同以后的履行和适用法律条款增添了争议。

第三、注意列明每项商品的单价
有些公司在买卖合同中,标的是多类商品,但却只在合同中明确各类商品的总价款,而不确定具体每种商品的单价,一旦合同部分履行后发生争议,就难以确定尚未履行的部分商品的价款。

第四、合同条款必须对等性
合同条款的对等性是公平原则的重要内容。

不要签义务多、责任重、权利少这类一边倒的合同,例如合同只规定我方违约要如何处理而无对方违约如何处理的内容。

同样,也不要签订权利多、义务少的、责任轻的合同,否则另一方可能以该合同违背公平原则对合同的有效性提出抗辩。

第五、在合同中明确违约金和赔偿金计算方法
《合同法》虽然规定一方违约,另一方可以向其追索违约金或赔偿金,但如果合同中没有明确数额或计算方法,法院就会视为双方当时放弃违约金权利,而不予支持。

增加赔偿实际损失的举证难度。

第六、签约对象的主体资格
当前,经营单位的性质、种类、背景比较复杂,有关部门的管理不到位现象比较普遍。

在此情况下,为防范欺诈行为,减少交易风险,非常有必要考虑交易对方的主体资格、履行合同能力、信用情况等。

主体资格方面应当查看一下对方的营业执照和企业参加年检的证明资料。

不能仅凭其名片、介绍信、工作证、公章、授权书、营业执照复印件等证件。

因为有的企业因连续两年不参加年检很有可能已被工商部门吊销营业执照。

第七、确定管辖法院
合同的双方当事人可以在书面合同中协议选择被告住所地、合同履行地、合同签订地、原告住所地、标的物所在地法院管辖,但不得违反对级别管辖和专属管辖的规定。

如果直接约定有难度,也可以约定:“如发生争议,双方均可向各自经营所在地法院提起诉讼。


第八、注意项目分包合同的特殊要求
公司承揽的有些项目是从其他承包商那里分包而来,此类合同涉及一个重要的问题是发包方是否允许承包商对项目进行分包。

根据合同法的规定,分包要经过发包方的同意,否则分包行为无效。

因此一定要注意原合同的约定,应当向承包商提出此问题并要求其征得发包方同意将工程分包给我方。

第九、注意定金与“订金”的区别
定金是债的一种担保方式。

债务人履行债务后,定金应当抵作价款或者收回。

给付定金的一方不履行约定债务的,无权要求返还定金;收
受定金的一方不履行约定债务的,应当双倍返还定金。

实践中如把定金写成订金,因订金在法律上被认定为预付款,不具有担保功能。

第十、仲cai裁机构名称要写具体、明确
合同中也可以约定由仲裁委处理双方的争议,仲cai裁的优点是速度快、效率较高,费用也比法院为节省。

约定仲cai裁机构应当明确。

仲cai裁为一裁终审制,不再允许向法yuan院提起诉su讼。

相关文档
最新文档