PDS2000操作使用说明书v0.1

合集下载

探伤仪操作手册(OTD-2000)V1.00

探伤仪操作手册(OTD-2000)V1.00

OTD-2000 数字超声波探伤仪(使用说明书)北京欧亚图科技有限公司目录1探伤仪概述及技术指标..................................................................................................... 错误!未定义书签。

1.1探伤仪概述 ................................................................................................................ 错误!未定义书签。

1.2主要技术指标 ............................................................................................................ 错误!未定义书签。

1.3探伤仪的性能特点 .................................................................................................... 错误!未定义书签。

2了解键盘、菜单系统和显示............................................................................................. 错误!未定义书签。

2.1电池充电及电源适配器的使用................................................................................. 错误!未定义书签。

2.2探伤仪的电源开关 .................................................................................................... 错误!未定义书签。

Eurotherm 2000系列控制器产品介绍说明书

Eurotherm 2000系列控制器产品介绍说明书

imagine making theimpossible possible2000Series controllersBuilt on our experience of design and applications knowledge spanning more than 40 years, the Eurotherm®2000 series brings you performance you can rely on and accuracy you can trust.At the same time no other range of controllers makes operation so easy. Menu driven operation provides easy intuitive and consistent access to all the controller functions.Simply imagine process excellence…and with Eurotherm you will achieve it. Our ranges of controllers provide world class control and versatility with clear, user friendly, operator interfaces. Add to this, a strong sales team of qualified engineers who understand your process, an absolute commitment to innovation by continuously re-investing in research and development; we can and do imagine making the impossible possible for our customers.Internal timer– A 5 mode timer suitable for simple time based profiling applications Universal input–9 different thermocouples, PT100, DC linear and a downloadable customcurveFour outputs–up to 4 outputs including 2 modular with many options including DCoutputsCommunication protocols–Modbus RTU, EI-Bisynch, DeviceNet®Three internal alarms–Configurable as High, Low, Deviation and Deviation High or Low alarms Two outputs– 1 relay and 1 logic (can be used as a relay with an external module)Suitable for•Small ovens •Chillers •Sterilisers •Trace heating •Heat sealing •Dwell timer–simple ramp dwell profile applicationsFour internal alarms–configurable as High, Low, Deviation,Deviation High, Deviation Low, Highand Low current alarmsSuitable for•Cold stores •Ovens and furnaces •Plastic extrusion •Packaging machines •Food and brewing applications •Every 2000 Series controller can be tailored to provide thecontrol solution you need. Modular design and easy, on-site configuration matches application requirements andgives you a temperature and process control solution that’sready to run the first time you switch it on.The 2000 Series provides control strategies ranging fromsimple ON/OFF to PID with advanced overshoot protection, providing the best control for the widest range of applications including valve positioning. Within the 2000Series there is also the 2500 Modular Controller and the 2604/2704 Controllers which, with their enhanced functionality and multiloop capability, offer a powerful addition to the range. Please consult Eurotherm sales for more information on these products.requirements Programming –up to 20, 16 segment programs (4 in the 2416) are available with 8 digital event outputs Four internal alarms –configurable as High, Low, Deviation,Deviation High or Low, high and Low Current alarms high and low output,high and low input 2, High and low setpoint and one Rate of change alarmModular –up to 4 outputs of which 3 aremodular with many different optionswithin the different modulesModules –up to 16 different types of moduleare availableCommunication protocols –Modbus RTU, EI-Bisynch, DeviceNet,Profibus DP Suitable for •Single and multi-zone furnaces •Kilns •Environmental chambers •Simple ratio •Humidity •Chemical and pharmaceutical •Applications •Glass furnaces and lehrs •Set p o in t FFOP Flow Meter FTAT Analytical Sensor PID Loo pPV +2400Dosing Pump Setpoint Easy to use controllers for greater flexibilityT im e Te mp e ra t ur e Setpoint Dwell time Switch off Ramp controlDwell Timer FunctionalityTe mp e ra t ur eEnd Type = DwellT im e End Type = Off Holdback atstart of dwellMaster ProgrammerSlave ControllersPDS communications M P gSC mmunic c ations PDS com In 2000 Series controllers it is possible to use the PDS communication link tosend a setpoint from one controller to a network of slave devices - providingthe economical creation of multi-zone temperature control solutions.PDS setpoint retransmissionRatiometric PyrometerThermocouple Output Switchover between two points 4-20mAmocouple Master Output Slave PDS Retransmission with FeedforwardModbus RTU Modbus Master The 2000 Series uses industry standard protocols such as Modbus RTU, DeviceNet or Profibus DPto communicate with supervisory systems andPLCs over EIA232, EIA485 (2 wire) or EIA422 (4wire). This carries the information and overallcontrol into the supervisory system whilemaintaining local access to the local equipmentensuring overall plant integrity in all situations.CommunicationSometimes it is desirable to control a process using two separate inputs toderive the PV (process value). This could be based on a highest wins, lowestwins, some function of the two inputs, or switching between the two inputs atsome pre-determined point in the process.For example, an application could consist of a thermocouple for measuring upto 800°C and a Ratiometric Pyrometer for measuring the range between700°C and 1,400°C.Typically when the temperature is below 740°C the thermocouple providesthe PV and, when between 740°C and 780°C the controller switches gentlyfrom the thermocouple to the Pyrometer which provides the PV up to 1,400°C.Derived inputsUsing Eurotherm setpoint retransmission over PDScommunications it is possible to use two 2400 controllersas a cascade control system with the output of the first (ormaster controller) forming the setpoint of the second (orslave controller).Eurotherm advanced algorithms enable the use of eithersetpoint or PV feedforward to limit the slave setpoint - forexample ±10% of the master setpoint or PV.Cascade control iTools configuration software enables you to store and clone controller configurations, as well as commission your process control system. This facility significantly reduces installation and commissioning time while commissioning timeEurotherm flexible 2000 Series offers a truly versatilesolution to all your requirements.Selection guide Features Panel size (DIN)IP Rating Single LoopDisplay TypeSupply Voltage Input Type PV Accuracy Control Types SP ProgrammerAnalogue IP/OP Digital IP/OPDigital Comms Alarm TypesPC Configuration21161/321/16IP6521002216e 2208e 1/16DIN rail 1/8IP6522002204e 1/4TC, RTD, mV, mA, V 1 x 4 dig LED TC, RTD, mV, mA, Volts 2 x 4 dig LED <0.25%On/Off. PID none In: 1 Out: 0In: 1 Out: 2none none none none none none none none none none none none none List based <0.25%On/Off. PID, VP none none none In: 1 Out: 1In: 3 Out: 4Modbus, DeviceNet List based 24V dc/ac 85-264V ac 85-264V ac 2132Dual input control Hi, Lo, Dev,Sensor break,Event, Heater failHi, Lo, Dev, Sensor break, Event, Heater fail Hi, Lo, Dev, Sensor break, 2416240824041/161/81/4IP652400TC, RTD, mV,mA, Volts 2 x 4 dig LED <0.2%On/Off. PID, VP 20 x 16 segments In: 2 Out: 3In: 11 Out: 11List based 24V dc/ac 85-264V ac Modbus, DeviceNet, Profibus Special FeaturesMaths EquationCombinational LogicTimers/Counters/TotalsReal Time Clock© Copyright Eurotherm Limited 2011Invensys, Eurotherm, the Eurotherm logo, Chessell, EurothermSuite, M ini8, Eycon, Eyris, EPower, nanodac and Wonderware are trademarks ofInvensys plc, its subsidiaries and affiliates. All other brands may be trademarks of their respective owners.All rights are strictly reserved. No part of this document may be reproduced, modified, or transmitted in any form by any means, nor may it be stored in a retrieval system other than for the purpose to act as an aid in operating the equipment to which the document relates, withoutthe prior written permission of Eurotherm limited.Eurotherm Limited pursues a policy of continuous development and product improvement. The specifications in this documentmay therefore be changed without notice. The information in this document is given in good faith, but is intended for guidance only.Eurotherm Limited will accept no responsibility for any losses arising from errors in this document.Bermuda Bolivia Bosnia and Herzegovina Botswana Brazil Brunei Darussalam Bulgaria Cambodia Cameroon Canada Central African Republic Chad Chile Colombia Congo Costa Rica Côte d’Ivoire Croatia Cyprus Czech Republic Denmark Djibouti Ecuador Egypt El Salvador Eritrea Estonia Ethiopia Fiji Finland Georgia Ghana Greece Greenland Guinea Hungary Iceland Indonesia Iraq Israel Jamaica Japan Jordan Kazakhstan Kenya Kuwait Kyrgyzstan Laos MozambiqueMyanmarNamibiaNicaraguaNigerNigeriaNorwayOmanPakistanPalestinian TerritoryPapua New GuineaParaguayPeruPhilippinesPolandQatarRomaniaRussiaRwandaSaudi Arabia Senegal Serbia and Montenegro Sierra LeoneSingapore Slovakia Slovenia Somalia South AfricaSri Lanka SudanSwaziland SyriaTajikistanTanzania Thailand The GambiaTunisia TurkeyTurkmenistanUganda Ukraine United Arab Emirates Uruguay UzbekistanVenezuelaVietnam Yemen Zambia ZimbabweAUSTRALIA Melbourne Invensys Process Systems Australia Pty. Ltd.T (+61 0) 8562 9800F (+61 0) 8562 9801E info.*************************AUSTRIA Vienna Eurotherm GmbH T (+43 1) 7987601F (+43 1) 7987605E info.*************************BELGIUM & LUXEMBOURG Moha Eurotherm S.A/N.V.T (+32) 85 274080F (+32) 85 274081E info.*************************BRAZIL Campinas-SP Eurotherm Ltda.T (+5519) 3707 5333F (+5519) 3707 5345E ******************************CHINA Eurotherm China T (+86 21) 61451188F (+86 21) 61452602E info.*************************Beijing Office T (+86 10) 5909 5700F (+86 10) 5909 5709/5909 5710E info.*************************FRANCE Lyon Eurotherm Automation SA T (+33 478) 664500F (+33 478) 352490E ******************************GERMANY Limburg Eurotherm Deutschland GmbH T (+49 6431) 2980F (+49 6431) 298119E info.*************************INDIA Mumbai Invensys India Pvt. Ltd.T (+91 22) 67579800F (+91 22) 67579999E info.*************************IRELAND Dublin Eurotherm Ireland Limited T (+353 1) 4691800F (+353 1) 4691300E info.*************************ITALY Como Eurotherm S.r.l T (+39 031) 975111F (+39 031) 977512E info.*************************KOREA Seoul Invensys Operations Management Korea T (+82 2) 2090 0900F (+82 2) 2090 0800E info.*************************NETHERLANDS Alphen a/d Rijn Eurotherm B.V.T (+31 172) 411752F (+31 172) 417260E ******************************POLAND Katowice Invensys Eurotherm Sp z o.o.T(+48 32) 7839500F (+48 32) 7843608/7843609E info.*************************SPAIN MadridEurotherm España SA T(+34 91) 6616001F (+34 91) 6619093E info.*************************SWEDEN MalmoEurotherm AB T(+46 40) 384500F (+46 40) 384545E ******************************SWITZERLAND Wollerau Eurotherm Produkte (Schweiz) AG T (+41 44) 7871040F (+41 44) 7871044E info.*************************UNITED KINGDOM Worthing Eurotherm Limited T (+44 1903) 268500F (+44 1903) 265982E info.*************************U.S.A.Ashburn VA Eurotherm Inc.T (+1 703) 724 7300F (+1 703) 724 7301E info.*************************ED63。

PDS 2000装置使用说明书

PDS 2000装置使用说明书

国电南自PDS 2000数字化防误操作系统装置使用说明书国电南京自动化股份有限公司GUODIAN NANJING AUTOMATION CO.,LTD安全声明1. 说明安全声明与相关的装置文件构成了安全操作、调试与测试的完整信息。

在对装置作任何操作之前,使用人员必须熟悉本安全声明的内容和装置铭牌的额定参数。

2. 健康和安全装置的正常和安全运行,依赖于恰当的运输、搬运和正确的贮存、安装和调试,以及细心的操作、维护和维修。

因此,只有合格人员才可操作或在装置上工作。

合格人员是指:——熟悉装置的安装、调试和运行及所接入的系统的人员;——能够按照认可的安全工程惯例执行操作,并经授权可对装置进行带电、掉电、隔离、接地操作的人员;——经过设备安全使用培训的人员;装置的安装、调试和运行由装置文件提供了说明,但手册不能涵盖所有细节,在出现问题或特殊情况时,未经正确授权不得采取行动。

3. 设备的安装、调试和维护警告!a) 装置的安装调试应由专业人员进行或指导;b) 装置上电使用前请仔细阅读说明书。

应遵照国家和电力行业相关规程,并参照说明书对装置进行操作、调整和测试。

如有随机材料,相关部分以资料为准;c) 装置施加的额定操作电压应该与铭牌上标记的一致;d) 严禁无防护措施触摸电子器件,严禁带电插拔模件;e) 在拆卸开装置面板后,应避免触及电路,装置包含电子电路,如果遭受静电,可能会受到损坏;f) 不管运行条件如何,必须将装置与保护地相连。

这也适用于一些特殊的场合,如在台桌上测试演示及离线配置。

不经恰当接地操作装置,可能会损坏装置,也可能会发生事故引起伤害;g) 不得将装置与带电导线相连,这可能会导致装置内部电路损坏;h) 在安装调试装置过程中,如果碰触装置或其连线要小心,以免受到电击。

*技术支持电话:(025)52393607传真:(025)52393606* 本说明书可能会修改,请注意核对实际产品与说明书版本是否相符。

重庆川仪PDS压力变送器PDS 说明书

重庆川仪PDS压力变送器PDS 说明书
电子室旋转
变送器的电子室可顺时针或逆时针旋转,但为了电子室内的连接安全,旋转有一定的角度限制。如图4所示,壳体与测量部连接的颈部有两片阴影部分区域,测量部的颈部有“旋转定位标识”,壳体与测量部的相对旋转在“旋转定位标识”指向阴影部分之内均可,可旋转的总角度270°(旋转时,“旋转定位标识”不可经过非阴影区域)。具体方法为:松开外壳紧固螺钉,根据现场的安装要求旋转,完成后拧紧外壳紧固螺钉。
图9 压力变送器安装结构件
安装方式
变送器的水平配管(压力过程连接)安装采用条形安装板+U型螺栓+现场安装管的方式,安装管直径Φ50Φ60mm,安装板与变送器用螺栓螺母连接,装配力矩。
图10压力变送器安装
变送器的启用
压力过程回路
以下举例说明压力回路的连接,如图11。
图11 压力过程系统连接图
按如下步骤,检查压力回路通畅且无泄漏。
4)不可抗拒原因引起的损坏,如地震、火灾、战争等。
2 安装和启用
环境条件
变送器的安装环境应满足以下条件:
自然环境条件
1)环境温度:-40+85℃
(防爆变送器T5温度组别最高+70℃、T6温度组别最高+60℃)
2)过程温度:-40+100℃
3)相对湿度:≤95%
4)大气压:86106kPa
机械环境条件
与电压>60V的线缆隔离;
避开附近大功率电气设备,使用屏蔽电缆(屏蔽层双端接地良好)。
接线腔连接
变送器采用二线制传输,因此信号线即电源线,与外部电源的连接示意图如图2。
图2变送器与外部电源的连接示意图
变送器通过电缆与电源和负载构成回路,在图2中,使用屏蔽电缆,屏蔽层连接到接线端子的地端,该端已与变送器外壳相连,要求屏蔽层另一端与现场大地可靠连接,否则不能达到良好的屏蔽效果。

重庆川仪PDS压力变送器PDS说明书

重庆川仪PDS压力变送器PDS说明书
图8 引压口的位置
导压管应垂直或倾斜排布,即使水平排布,也应有适度的倾斜,使过程介质不会残留在管道内。
(2)变送器的位置
过程介质为液体或蒸汽时,原则上变送器的位置低于引压阀;
过程介质为气体时,原则上变送器的位置高于引压阀。
(3)冷凝、防冻
测量蒸汽介质时,导压管内的液体因过程温度或环境的变化而反复凝结、蒸发,会使高低侧分别产生液柱,液柱的高度不同将为测量带来误差,因此,蒸汽测量时请使用冷凝槽。
图9 压力变送器安装结构件
安装方式
变送器的水平配管(压力过程连接)安装采用条形安装板+U型螺栓+现场安装管的方式,安装管直径Φ50?Φ60mm,安装板与变送器用螺栓螺母连接,装配力矩。
图10 压力变送器安装
变送器的启用
压力过程回路
以下举例说明压力回路的连接,如图11。
图11 压力过程系统连接图
按如下步骤,检查压力回路通畅且无泄漏。
电子室旋转
变送器的电子室可顺时针或逆时针旋转,但为了电子室内的连接安全,旋转有一定的角度限制。如图4所示,壳体与测量部连接的颈部有两片阴影部分区域,测量部的颈部有“旋转定位标识”,壳体与测量部的相对旋转在“旋转定位标识”指向阴影部分之内均可,可旋转的总角度270°(旋转时,“旋转定位标识”不可经过非阴影区域)。具体方法为:松开外壳紧固螺钉,根据现场的安装要求旋转,完成后拧紧外壳紧固螺钉。
与电压>60V的线缆隔离;
避开附近大功率电气设备,使用屏蔽电缆(屏蔽层双端接地良好)。
接线腔连接
变送器采用二线制传输,因此信号线即电源线,与外部电源的连接示意图如图2。
图2 变送器与外部电源的连接示意图
变送器通过电缆与电源和负载构成回路,在图2中,使用屏蔽电缆,屏蔽层连接到接线端子的地端,该端已与变送器外壳相连,要求屏蔽层另一端与现场大地可靠连接,否则不能达到良好的屏蔽效果。

格博CAD说明

格博CAD说明

前言以下所说明的题目是假设你们已经能应用 Accumark 或MicroMark 的 PDS 系统 . PDS 2000/SILHOUETTE 2000 是一个包含 AccuMark PDS, MicroMark PDS 和 FCAD 的新软件 . 合并以後除了功能加强外 , 系统内的指令可由用户自订 .PDS 2000 与 SILHOUETTE 2000 的主要分别是在硬件 . PDS 2000 是一个桌面工作站而 SILHOUETTE 2000 是配合打版师傅的工具直接在系统打版 .桌面的认识用户可自订屏幕上的指令 , 图案指令 颜色或工作区域.PDS 2000 / SILHOUETTE 2000 菜 单菜 单 内 其 有 11 个 下 拉 式 菜 单 .档 案 编 缉检 视点 的 处 理线 段 处 理样 片 处 理放缩量 度 起 草 绘 图视 窗 说 明工 具 栏标 准 工 具 列储 存 一 些 常 用 的 指 令 . 栏 内 的 按 钮 可 直 接 执 行 指 令 , 省 去 进 出 菜 单 的 时 间 .用 户 可 以 设 定 栏 内 的 按 钮 .在 标 准 工 具 列 增 加 或 移 除 按 钮 . 可 改 变 按 钮 的 大 小 . 创 造 新 的 工 具 列 .可 使 工 具 列 浮 动 或 合 并 其 它 工 具 列 .显 示 标 准 工 具 列1 利 菜 单 栏 检 视 - 屏 幕 分 布 .2 在 其 他 - 工 具 栏 , 按 一 下 四 方 盒 .3 按 确 定 储 存 新 的 屏 幕 分 布 .- 如 希 望 还 完 到 随 机 的 设 定 , 可 按 恢 复 优 先 .识别工具列内按钮的指令把光标停留在按钮上直致屏幕显示与它关联的指令 .使用 AccuMark 菜单如你们已习惯使用旧的AccuMark 菜单 你们可以把它打开 它会显示在旧的位置上 .显示 AccuMark 菜单的方法1 利用菜单栏检视 - 屏幕分布 .2 在菜单- AccuMark , 按一下四方盒。

重庆川仪PDS压力变送器PDS 说明书

重庆川仪PDS压力变送器PDS 说明书
应采取适当的措施,防止变送器及导压管内的过程流体发生冻结。凝固的介质可能会损坏传压膜片。
安装用结构件
压力变送器的安装使用条形安装板+U型螺栓+安装托架+固定环的组合结构。装配步骤为:先将安装板用U型螺栓和螺母与现场安装管装配,然后用M8螺钉螺母将安装托架装配到安装板上,再将变送器和固定环装配在安装托架上,所有螺钉螺母的装配力矩。
与电压>60V的线缆隔离;
避开附近大功率电气设备,使用屏蔽电缆(屏蔽层双端接地良好)。
接线腔连接
变送器采用二线制传输,因此信号线即电源线,与外部电源的连接示意图如图2。
图2变送器与外部电源的连接示意图
变送器通过电缆与电源和负载构成回路,在图2中,使用屏蔽电缆,屏蔽层连接到接线端子的地端,该端已与变送器外壳相连,要求屏蔽层另一端与现场大地可靠连接,否则不能达到良好的屏蔽效果。
本说明书作为产品附件与产品同时送达使用者手中。
请使用当前版本的说明书,不保证其它版本说明书能在当前产品中正常使用,除非另有说明。
本说明书中如有错误、遗漏或不可理解之处,请联系重庆川仪。
对于用户特殊订货仪表,本说明书不完全适用,可作附加说明。
1.4品质保证
质保期限根据报价书指定,或由双方在合同中特殊说明。保修期内发生故障,原则上免费维修。
图2中的序号“3”有两个接线柱,可直接连接内阻不大于10Ω的标准电流表,检测变送器输出电流。
图2中的230~500Ω负载电阻为HART通信功能配用。HART终端设备可连接到接线盒的“+”、“-”两端,也可连接到负载电阻的两端。
对于本安型变送器,图2中的虚线框部分应置于无爆炸危险的安全场所,且供电电源必须为经过相关认证的安全栅。
图13 显示窗内容说明

PDS2000系统使用

PDS2000系统使用

PDS2000系统使用PDS2000系统的主要功能是数据录入和管理。

用户可以使用系统提供的表格和表单来录入数据,或者通过导入外部数据文件来快速导入数据。

在录入数据的过程中,系统提供了数据验证和自动填充等功能,可以确保数据的准确性和一致性。

此外,用户还可以使用系统提供的数据查询功能来和过滤数据,以便更方便地进行数据管理。

PDS2000系统还提供了强大的数据分析功能。

用户可以使用系统自带的统计分析工具来对数据进行分析,包括计算均值、中位数、标准差等统计指标,生成频率分布表和直方图,进行相关性和回归分析等。

此外,系统还支持用户自定义的分析方法和算法,可以根据用户的需求灵活地进行数据分析。

数据可视化是PDS2000系统另一个重要的功能。

系统提供了多种图表类型,包括折线图、柱状图、饼图等,用户可以根据需要选择适当的图表类型来展示数据。

此外,系统还支持图表样式、颜色和字体的自定义,用户可以根据自己的喜好和需求设置图表的外观。

PDS2000系统还能够生成数据报告。

用户可以使用系统提供的报告模板来生成报告,或者自定义报告格式和内容。

系统支持报告的导出和打印,用户可以将报告导出为PDF、Excel等格式,或者直接打印输出。

此外,系统还支持报告的自动化生成和定时发送,让用户能够方便地与他人共享报告。

除了以上功能,PDS2000系统还具有一些其他的实用功能。

例如,系统支持数据的备份和恢复,用户可以定期备份数据以防止数据丢失,并在需要时恢复备份的数据。

系统还支持数据的批量处理和批量导出,让用户能够高效地处理和导出大量数据。

总体来说,PDS2000系统是一种功能强大的数据管理和处理软件系统。

它提供了丰富的功能和工具,帮助用户高效地处理和分析大量的数据,并生成精美的报告。

无论是科研人员、数据分析师还是业务人员,都可以通过使用PDS2000系统提升工作效率和数据处理的质量。

PDS2000后台软件使用说明书

PDS2000后台软件使用说明书

国电南自PDS 2000数字化防误操作系统后台使用说明书国电南京自动化股份有限公司GUODIAN NANJING AUTOMATION CO.,LTD国电南自 PDS 2000后台软件使用说明版本声明本说明书适用于PDS 2000数字化防误操作系统后台V1.01版本。

说明书版本修改记录表* 技术支持电话:(025)52393607传真:(025)52393606* 本说明书可能会修改,请注意核对实际产品与说明书版本是否相符。

* 2012年2月第1版第1次印刷目录1 登录和退出 (3)1.1 系统启动 (3)1.2 用户登录 (4)1.3 选项卡和工具栏 (4)1.4 退出登录 (5)2 常用操作 (5)2.1 画面调整 (5)2.2 操作票 (6)2.3 常用操作中其他工具 (18)3 设备逻辑 (21)3.1 逻辑编辑 (21)3.2 逻辑导入 (23)3.3 逻辑导出 (24)3.4 逻辑检查 (24)3.5 用户逻辑 (25)4 “其他”工具栏 (27)4.1 更换皮肤 (27)5 系统配置 (28)5.1 数据库说明 (29)5.2数据库操作 (30)6 画面编辑 (36)6.1 图形编辑工具界面 (36)6.2 图形文件处理 (42)6.3 基本绘制功能 (44)6.4 编辑功能 (51)6.5 设置线型 (53)6.6 索引框 (54)6.7 调用图元 (56)7 图形界面中的快捷操作 (59)7.1 设备及锁具维护 (59)7.2 按间隔解除闭锁逻辑 (61)8 权限配置 (62)9 日志查看 (65)10 密码修改 (66)1 登录和退出 1.1 系统启动本软件为免安装程序,将安装光盘内容拷入相应目录即可,例如:D:\PDS2000。

启动:打开PDS2000文件夹,先双击“install.bat ”,待程序启动完成后再回到桌面双击打开PDS2000.exe 程序。

系统启动后,显示主界面如图1.1。

电能公司电力表2000系列 Quick Start 指南说明书

电能公司电力表2000系列 Quick Start 指南说明书

ContentsDescription PageMechanical Installation . . . . . . . . . . . . . . . . . . . . .1Electrical Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . .2Network Planning . . . . . . . . . . . . . . . . . . . . . . . . .4Locating the Gateway Card . . . . . . . . . . . . . . . . . .5Configuring the Meter’s Gateway Card for Network Accessibility . . . . . . . . . . . . . . . . . . . . . .6Configuring a Fixed IP Address for the Gateway Card using a local PC . . . . . . . . . . . . .6Verify the IP address . . . . . . . . . . . . . . . . . . . . .9Network Access . . . . . . . . . . . . . . . . . . . . . . . . . .9Restarting and Factory Defaults . . . . . . . . . . . . . .9Restart the Gateway Card . . . . . . . . . . . . . . . . .9Additional Information . . . . . . . . . . . . . . . . . . . . .10Power Xpert Meter 2000 SeriesCopyright © 2011 by Eaton Corporation . All rights reserved .Specifications contained herein are subject to change without notice .Power Xpert is a registered trademarks of Eaton Corporation .EATON CORPORATION - CONFIDENTIAL AND PROPRIETARY NOTICE TO PERSONS RECEIVING THIS DOCUMENT AND/OR TECHNICAL INFORMATIONTHIS DOCUMENT, INCLUDING THE DRAWING AND INFORMATION CONTAINED THEREON, IS CONFIDENTIAL AND IS THE EXCLUSIVE PROPERTY OF EATON CORPORATION, AND IS MEREL YON LOAN AND SUBJECT TO RECALL BY EATON AT ANY TIME . BY TAKING POSSESSION OF THIS DOCUMENT, THE RECIPIENT ACKNOWLEDGES AND AGREES THAT THIS DOCUMENT CANNOTBE USED IN ANY MANNER ADVERSE TO THE INTERESTS OF EATON, AND THAT NO PORTION OF THIS DOCUMENT MAY BE COPIED OR OTHERWISE REPRODUCED WITHOUT THE PRIOR WRITTEN CONSENT OF EATON . IN THE CASE OF CONFLICTING CONTRACTUAL PROVISIONS, THIS NOTICE SHALL GOVERN THE STATUS OF THIS DOCUMENT .DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITYThe information, recommendations, descriptions and safety notations in this document are based on Eaton Electrical Inc . and/or Eaton Corporation’s (“Eaton”) experience and judgment and may not cover all contingencies . If further information is required, an Eaton sales office should be consulted .Sale of the product shown in this literature is subject to the terms and conditions outlined in appropriate Eaton selling policies or other contractual agreement between Eaton and the purchaser .THERE ARE NO UNDERSTANDINGS, AGREEMENTS, WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, OTHER THAN THOSE SPECIFICALL Y SET OUT IN ANY EXISTING CONTRACT BETWEEN THE PARTIES . ANY SUCH CONTRACT STATES THE ENTIRE OBLIGATION OF EATON . THE CONTENTS OF THIS DOCUMENT SHALL NOT BECOME PART OF OR MODIFY ANY CONTRACT BETWEEN THE PARTIES . In no event will Eaton be responsible to the purchaser or user in contract, in tort (including negligence), strict liability or otherwise for any special, indirect, incidental or consequential damage or loss whatso-ever, including but not limited to damage or loss of use of equipment, plant or power system, cost of capital, loss of power, additional expenses in the use of existing power facilities, or claims against the purchaser or user by its customers resulting from the use of the information, recommendations and descriptions contained herein .PXM 2000 Quick Start GuideMechanical InstallationIM02601002E 1Mechanical Installation 4” Diameter round mounting 92 mm Square Form ANSI Studs 4” Round Form Caution: Do not overtightennuts as this can damage the me-ter. The maximum installationtorque is 0.4 Newton-Meter.92 mm square formUnscrew ANSI studs for DIN InstallationPXM 2000 Quick Start GuideElectrical Wiring2 IM02601002EElectrical WiringNote: Other wiring configurations are available . See the Power Expert Meter 2000 Userand Installation Guide for additional informationWYE Direct 3 Phase, 4-wireWYE with PTs 3 Phase, 4-wirePXM 2000 Quick Start GuideElectrical Wiring IM02601002E 3DELTA Direct 3 Phase, 3-wireDELTA with PTs 3 Phase, 3-wirePXM 2000 Quick Start GuideNetwork Planning4 IM02601002ENetwork PlanningThe hardware for the Power Xpert Meter 2000 family is similar to other EATON IQ 250 and 260 meters except that these meters include an integrated, multi-function Ethernet network gateway card . The Power Xpert Meter 2000 Gateway Card provides many of the features found in the rest of the Power Xpert line of meters, including:• Local web server • Modbus/TCP communitations • SNMP communications • Power Xpert Software (PXS) communications • BACnet/IP communications The Network PC requires a web browser (Internet Explorer versions 7 or 8 are sup-ported) and an installed version 6 or later of the JAVA J2SE JRE (Java Runtime Environ-ment) . If Java is not already installed, you or the network administrator may download it from www .java .com and install it per Sun’s instructions . See the Power Expert Meter 2000 User and Installation Guide for additional information .An Ethernet connection is used for configuring the meter’s gateway card communica-tion settings via a web browser . Y ou may need to contact your network administrator for some network and configuration information . In preparation, you will need to decide if the meter will be manually assigned a fixed (static) IP address or will be automatically assigned a fixed IP address by a DHCP server somewhere on the network . With either method the assigned network address must not change once the meter has been de-ployed . Changing the IP address will cause loss of communication until the associated client PCs change the corresponding meter’s IP addresses .Discuss with your network administrator whether you should manually configure the meter with an assigned IP address or whether the DHCP server will assign one . For the DHCP server to provide a fixed IP address, your network administrator will need to know the MAC address assigned to the meter .H C aution Eaton strongly recommends using a fixed IP address if an Eaton PXS system will be ac-cessing the meter . Otherwise, should the IP address change (after a power outage, for example), PXS will no longer be able to access data from the meter .The MAC address is found on a small label that consists of 14 letters and numbers . It looks something like: 002080850047EF Locate the MAC address on your meter and record it here . MAC Address : ______________________________________________________________Is DHCP going to be used to assign the IP address to your meter? ___ Y es ___ No If Yes : Provide the MAC address to the network administrator and record the fixed IP address the network administrator will assign to your meter in the DHCP server here:IP Address: __________________________________________________________________PXM 2000 Quick Start GuideLocating the Gateway CardIM02601002E 5The card will be configured remotely . Skip to the section entitled Verify the IP addressIf No :Record the following information provided by the network administrator here:IP Address: _________________________________________________________________Subnet Mask: _______________________________________________________________Default Gateway: ____________________________________________________________Primary DNS Server IP Address _______________________________________________Secondary DNS Server IP Address _____________________________________________Locating the Gateway CardFirst, ensure power is applied to the meter .The Power Expert Meter 2000 Gateway Card is the blue card installed in the right-most option slot (slot 2) on the rear of the meter . The card is labeled: Power Xpert GatewayPXM Series 2000 .PXM 2000 Quick Start GuideConfiguring the Meter’s Gateway Card for Network Accessibility6 IM02601002ELocation of Gateway CardThere are four indicator LEDs on the Gateway Card labeled: Status , DHCP , Ident , andPower . When power is first applied all the lights should be off for a few seconds and then the Power light will illuminate . This indicates the card has power and is running .Configuring the Meter’s Gateway Card for Network Accessibility Configuring a Fixed IP Address for the Gateway Card using a local PCY our network administrator provided an IP address, a subnet mask, and a default gate-way (which you entered in the previous section) . This information must be entered into the Gateway Card using a local PC, such as a laptop .This method requires a PC with the following:• an Ethernet port• an Ethernet cable (either straight-through or cross-over)• A web browser such as Internet Explorer 7 or 8• an installed version 6 or later JAVA J2SE JRE (Java Runtime Environment) . If not already installed you may download it from www .java .com and install it . (If Java isn’t installed, you’ll be prompted to install it .)To configure the Gateway Card:1 . On the PC, launch the Java Control Panel screen (available through the WindowsPXM 2000 Quick Start Guide Configuring the Meter’s Gateway Card for Network Accessibility IM02601002E 7Control Panel ) .2 . On the General tab, click the Settings button under Temporary Internet Files .3 . Ensure the Keep T emporary Files on My Computer check box is cleared . 4 . Connect the PC to the Gateway Card through an Ethernet cable (either a straight though or cross-over CAT 5 cable) .There are two green lights (LEDs) located on the gateway card’s Ethernet port . If the Ethernet cable is connected to an active Ethernet port on the PC both lights should be illuminated (the light labeled Act may be flickering reflecting network activity) . 5 . The card’s default Ethernet IP address is 192 .168 .1 .1 . Set the PC’s address to an address on the same subnet, such as 192 .168 .1 .100 . To do this, use the following steps:a . Click Window’s Start . b . Choose either Settings > Control Panel (Windows 2000) or Control Panel (Windows XP) .c . In the Control Panel , click Network Connections and right-click Local Area Connection . Select Properties from the shortcut menu .d . Click the Properties button .e . In the Properties dialog box, select Internet Protocol (TCP/IP) and click the Properties button .f . In the Internet Protocol (TCP/IP) Properties dialog box, select Use the follow-ing IP address and enter the following in the IP address field: 192.168.1.100g . Click OK throughout the various dialog boxes .6 . Launch a web browser and navigate to the following IP address: 192.168.1.1If an information screen appears stating the certificate cannot be verified and asking if you want to run anyway, select run.Loading Page Java will load and then the meter’s Home page will appear .PXM 2000 Quick Start GuideConfiguring the Meter’s Gateway Card for Network Accessibility8 IM02601002EMeter Home Page 7 . Click the Setup button . The Setup page will appear . (Y ou can also click the Setup Meter link at the bottom of the page to go directly to the Quick Setup folder .)8 . Locate and click the open icon to the left of the Quick Setup folder . The folder opens to show two subfolders: Meter and Network .Opening the Quick Setup Folder 9 . Click the Network folder . 10 . Click the Edit button .Edit Button (on the right of the page)A Login dialog box appears .11 . The default Username is admin and the default Password is admin . Log in using these credentials .PXM 2000 Quick Start GuideNetwork AccessIM02601002E 9Login dialog12 . I f you successfully logged in as admin you may now configure the card for the set-tings specified by your network administrator . Refer to the previously recorded net-work settings . Y ou can also enter such optional information as the meter’s location, who to contact in case of problems, etc .13 . W hen you’ve completed configuration, click the OK button .The new IP address will take effect shortly after clicking OK . The Gateway Card will redirect you to the new IP address and reload the Java applet . Y ou can continue to configure the meter after it is connected to your LAN .Refer to the PXM 2000 Meter User’s Guide (IM02601001E) for additional configura-tion details .14 . D isconnect the Ethernet cable to the PC and connect the meter to the LAN .Note: Remember to reconfigure the PC’s network settings for your LAN .This concludes network configuration . Y ou can now proceed to verify the IP address .Verify the IP addressTo check the IP address from the meter’s front panel:1 . If the meter has power, the display should be showing normal data, such as voltage, current, etc .2 . Push the menu button on the face of the meter . The main menu screen appears .3 . Push down repeatedly until IP blinks .4 . Push enter and the meter’s IP address appears, which should appear something like the following:010.222.051.066In this example the IP address is 010.222.051.066 . This should match the ad-dress the network administrator provided for this meter .5 . Push menu to return to the main menu .Network AccessOnce the network IP address is known, most meter functions and configuration can be done via the network . Use a networked client PC running version 6 or later of the JAVA J2SE JRE and a web browser such as Internet Explorer 7 or 8 to navigate to the meter’s IP address . See the meter’s complete user’s manual for additional information .PXM 2000 Quick Start GuideRestarting and Factory Defaults10 IM02601002E Restarting and Factory DefaultsThe gateway card provides the ability to restart and to reset itself to the factory defaults . There is a momentary push-button switch accessed through a small hole in the face plate of the gateway card . Although it is not used in normal operations, this switch al-lows you to restart the gateway card in the meter .Restart the Gateway CardThe gateway card restart push-button switch is located behind the hole in the card face plate closest to the LED labelled DHCP . This switch is used to restart just the gateway card (not the meter) should it be necessary to recover from some abnormal condition .Momentarily press the switch by pushing a small device into the hole to activate the switch .Detailed information on applications and options can be found in the PXM 2000 Meter User’s Guide (IM02601001E) on the CD shipped with the meter . The guide can also be found at http://www .eaton .com/powerxpert .Eaton Corporation Electrical Group 1000 Cherrington Parkway Moon Township, PA 15108United States 877-ETN-CARE (877-386-2273)Eaton .com© 2011 Eaton Corporation All Rights Reserved Printed in USA Publication No . IM02601002E October 2011PowerChain Management is a registered trademark of Eaton Corporation . All other trademarks are property of their respective owners .。

柯图泰感光胶PLUS 2000 (C) PDS 产品技术资料

柯图泰感光胶PLUS 2000 (C) PDS 产品技术资料

PLUS 2000 产品技术资料耐溶剂型直接感光胶产品说明PLUS 2000是高品质,34%固态含量,含有色素、高分子和单体聚合物,溶于水的感光胶剂。

需要混合重氮敏化粉使用。

应用与操作由于PLUS 2000对一系列含溶剂和UV油墨都有高抗性,因此它在大部分丝网印刷上均适用的网印版膜感光胶剂。

PLUS 2000最适合于耐印性高,印刷品质高,在印刷后又容易使网版再生的情况下使用。

危险提示若摄取,敏化粉是有害的。

避免吸入人体。

应穿戴手套和保护眼睛的防护镜。

在处理大量的敏化粉时,穿戴防尘面具。

产品对皮肤,眼睛和呼吸道可能会有刺激性。

以上几个方面的安全措施能避免用户遭遇到危害健康。

储存在凉爽以及干燥的地方,并且远离炎热,易燃和有孩童的地方。

感光胶没被列入危险品类(在感光之前和之后),因此在正常的使用下是不会有危险的。

但是,产品含有氯甲基异噻唑啉酮(一种抗微生物剂),这对某些人可能有产生过敏反应。

若喷进眼睛可能有有刺激性,皮肤敏感的人可能需要保护。

在适当的情况下穿戴手套和防护镜。

告诫感光胶:可能会产生过敏反应。

重氮敏化粉:若吞下,有害。

操作指示以及安全处理使感光胶混合注:新“直接加入”重氮敏化粉在黄色萤光管或低钨光下处理 PLUS 2000。

PLUS 2000包括一包含有感光胶和重氮敏化粉的包装袋。

在敏化前,请先阅读“健康和安全信息”。

把二个组分如下混合:1.用剪刀把含有重氮敏化粉的包装剪开(不可以用牙齿把它打开)。

2.直接把重氮敏化粉加入感光胶(不需用水溶解敏化粉或把水加入感光胶)。

3.彻底搅拌大约2-3分钟以确保感光胶彻底被敏化。

4.让感光胶消泡至少15分钟才使用。

丝网准备未使用过的聚酯或尼龙Autoprep Gel磨网膏和Universal Mesh Prep脱脂剂已使用过的聚酯或尼龙Universal Mesh Prep脱脂剂不锈钢网Universal Mesh Prep脱脂剂涂布和烘干把网版用边缘站立,然后用高品质的上浆槽,如下进行:1. 在网版的下侧(印刷面)涂两层。

PDS2000操作使用说明书v0.1

PDS2000操作使用说明书v0.1

PDS2000数字化防误操作系统操作使用说明书南京国电南自城乡电网自动化工程有限公司目录第一章登录和退出 (5)1.1系统启动 (5)1.2用户登录 (5)1.3选项卡和工具栏 (6)1.4退出登录 (6)第二章常用操作 (7)2.1画面调整 (7)2.2工作票 (7)2.2.1 图形开票 (7)2.2.2 开票操作菜单 (9)2.2.3 手工开票 (13)2.2.4 调用典型票 (14)2.2.5 调用预存票 (15)2.2.6 调用历史票 (16)2.3常用操作中其他工具 (17)2.3.1 钥匙学习 (17)2.3.2 查找设备 (18)2.3.3 置位 (18)第三章设备逻辑 (19)3.1逻辑编辑 (19)3.2逻辑导入 (20)3.3逻辑导出 (21)3.4逻辑检查 (21)3.1用户逻辑 (22)第四章“其他”工具栏 (23)4.1更换皮肤 (23)第五章系统配置 (24)第六章画面编辑 (25)6.1图形编辑工具界面 (25)6.1.1标题栏 (26)6.1.2菜单栏 (26)6.1.3 主工具栏 (28)6.1.4 图形工具栏 (28)6.1.5 颜色栏 (28)6.1.6 状态栏 (28)6.1.7 作图区 (28)6.1.8 平面 (29)6.2图形文件处理 (31)6.2.1图形保存 (31)6.2.2图形打开 (31)6.3基本绘制功能 (32)4.3.1直线 (32)6.3.2 矩形(空心/实心) (33)6.3.3 圆角矩形(空心/实心) (34)6.3.4 圆(空心/实心) (34)6.3.5 椭圆(空心/实心) (35)6.3.6多边形(空心/实心) (35)6.3.7 多义线(多义线) (35)6.3.8扇形(空心/实心) (36)6.3.9 弧段 (37)6.3.10 文字 (37)6.4编辑功能 (38)6.4.1选择 (39)6.4.2移动 (39)6.4.3删除 (39)6.4.4 剪切、复制、粘贴 (40)6.4.5对齐 (40)6.4.6居中 (40)6.4.7等距 (40)6.5设置线型 (41)6.6索引框 (43)6.7调用图元 (45)6.8画面设置 (46)第七章权限配置 (47)第八章日志查看 (49)第九章密码修改 (51)第一章 登录和退出1.1 系统启动方法1:在桌面上直接点击“PDS2000”快捷方式图标;方法2:在系统安装目录下打开PDS2000程序。

设备模型操作手册

设备模型操作手册

PDS---工厂模型设计软件设备模型操作手册编写:韩婷校核:于玲菊 1998年4月⒈引言Equipment Modeling ,Piping Modeling和 Frameworks Environment是PDS三维工厂设计系统的三个基本模块,综合运用可以较真实的反映出设计者的意图,缺一不可。

 Equipment Modeling主要用于建立工厂模型中的设备实体,以表现其外形尺寸及坐标位置、操作空间、以及为配管模型提供精确的管口方位、坐标及连接数据。

下面介绍Equipment Modeling模块的使用。

建模前提条件 Equipment Modeling模块所包括的工作范围主要是工厂模型中各种设备实体 。

如:各类容器、泵、塔、反应器;以及设备基础;设备附件如:管口、裙座等;辅助设施,如:平台、梯子、围栏等等。

建立设备模型的前提条件:⒈需要准备必要的工程资料,包括:设备布置图、设备装配图、管口方位图、土建基础图、设备附件图。

⒉上机建模的人员应具备基本的读图能力, 能理解工程图所表达的内容。

⒊应由项目管理员建立好设备分区,定义设备模型文件,定义模型坐标系统并提交;定义项目样板文件参数,包括模型单位、层定义、颜色定义、线型及粗细等的定义;工程项目其它各种参数的定义。

⒉建模 2.1进入建模环境.在上述的准备工作完成后,我们可以开始进行建模工作。

首先应查阅设备布置图,确定设备所属的设备分区。

然后启动PDS系统,具体操作如下:⒈点取PD_SHELL启动PDS主菜单,选择所用工程项目名,如KR23。

⒉点取Equipment Modeling,进入Equipment Modeling Options菜单。

⒊选择Equipment Modeling,进入设备分区选择菜单(下图)⒋选择所属分区,点取 进入模型选择 ⒌选择设计模型名称,点取 进入建立设备模型的MicroStation图形环境。

设置视图如下图所示:2.2 开始建模建立设备模型有两种方法: 一种为基本元素组合法.即采用最简单的基本元素体组合起来,构成整台设备。

PDS2000快速入门

PDS2000快速入门

PDS2000快速入门RESON公司的PDS2000将实现从调查计划编制到制图的所有多波束调查任务。

本文旨在为用户使用PDS2000提供快速参考和经验提示,包括建立软件配置、创建显示窗口、采集数据以及其它PDS2000功能。

建立项目1大地坐标1.1创建项目前必须建立大地坐标。

1.2可以通过图标或浏览窗口访问数据库。

1.3首先建立椭球体。

1.3.1选择新建(New):为坐标系统命名。

1.3.2从左边窗口选择正确的椭球体移入右边窗口(Add)。

1.4建立投影。

1.4.1选择新建(New):为投影命名。

1.4.2在投影窗口内,在下面选择添加(Add)查找所需投影。

1.4.3输入当地投影参数。

1.4.4所建投影出现在投影窗口的左边。

1.4.5选择该投影,点击添加(Add),将所选投影添加到右边窗口。

1.5建立坐标转换。

1.5.1选择新建(New):为坐标系统命名。

1.5.2在坐标转换窗口内,在下面选择添加(Add)打开所需坐标转换窗口。

1.5.3为该坐标转换命名。

1.5.4PDS2000没有默认用户前面定义的椭球体,用户需要从下拉列表中找到正确的源椭球体。

1.5.5用户从下拉列表中找到正确的源椭球体,即调查数据用椭球体。

1.5.6为该坐标转换写说明信息。

1.5.7该坐标转换为7参数,旋转角度单位是秒。

2项目建立2.1建立一个包含所有调查任务参数的项目。

2.2项目建立后,可以作为以后建立其它项目的模版。

2.3从菜单选择File->New。

2.3.1可以选用已有项目作为模版。

2.3.2选择新建(New),向导将一步步引导用户完成项目建立,本快速入门将新建一个项目。

2.4项目配置。

2.4.1定义深度、速度和距离等参数的度量单位。

2.4.2定义格式:网格、地理坐标和参数表示的小数位数。

2.4.3定义椭球体:在先前定义的通用椭球数据库选择。

2.4.3.1首先建立椭球体。

选择新建(New):为坐标系统命名。

从左边窗口选择正确的椭球体移入右边窗口(Add)。

2000标准负荷测量仪仪表说明书

2000标准负荷测量仪仪表说明书

本手册主要介绍2000标准负荷(扭矩)测量仪的连线、校准、设置和使用方法,请用户在使用前仔细阅读。

一、2000标准负荷测量仪简介2000标准负荷(扭矩)系列测量仪是一款经过10年大量实践检验被最广泛认知的基础力学测量仪器,10年来先进的测量器具在基础力学测量领域中的推广应用和称重传感器在性能、质量、产能以及在世界市场上份额的增加,该系列仪器有着不可磨灭的贡献,应用领域包括:精密力值测量;扭矩测量、材料性能测试、应力应变测量、峰值测量以及基于应变原理传感器的生产检测领域。

相关的产品更新信息请参阅第3页。

2000A型仪表为最常用的测力计配套仪表,具有很高的可靠性和性能价格比,6或40个数据通道,额定显示分度5万,重复性、线性<0.01%FS, AD转换速率50~500次/秒,mV/V量值准确度:0.030%+0.020%(准确度采用相对于读数+相对于量程的不确定度描述方法,以下同),温度系数:<20ppm+10ppm,该款仪表主要应用于当量准确度为0.3%的标准测力计和常规力值测量。

2000B型仪表提供更高的准确度和测量效率,适用于当量准确度为0.1%的标准测力计、标准叠加式测力机和高要求测量需求,6或40个数据通道,显示分度20万,重复性、线性<0.005%FS,mV/V量值准确度:0.015%+0.010%,温度系数:<10ppm+5ppm。

2000D型仪表为扭矩测量仪表,6或40个数据通道,额定显示分度5万,重复性、线性<0.01%FS,AD转换速率50次/秒~500次/秒,mV/V量值准确度:0.030%+0.020%,温度系数:<20ppm+10ppm。

2000E型仪表为应变式传感器检测、补偿和调整的专用仪表,可直接显示传感器输出信号mV/V 的测量值,信号输入范围:-12mV/V~+12mV/V,最小分辨率:0.01 V/V(等效于6.5位数字电压表),重复性、线性<0.005%FS,mV/V量值准确度:0.015%+0.010%,温度系数:10ppm+5ppm,内置传感器供桥电源,可替代“稳压电源+数字万用表”的传感器检测、补偿和调整方法。

DO2000操作面板使用说明

DO2000操作面板使用说明

DO2000操作面板使用说明一、DO2000操作面板界面二、DO2000操作面板按键说明三、DO2000 操作面板的参数修改方法通常情况下,D02000面板是锁定状态,要想更改参数,需要先进行如下操作:四、DO2000 操作面板的参数保存方法六、DO2000操作面板的功能介绍6.1 通过DO2000操作面板操作纠偏设备6.1.1 电眼模式选择:通过按“F1键”,可选择使用单电眼或双电眼工作。

注:每按一次“F1键”,纠偏都会切换到手动状态。

6.1.2纠偏手动动作测试:按“手动键”,纠偏切换到手动模式,长按“向上键”、“向下键”,电机会有相应的动作。

点动“向上键”或“向下键”,电机点动移动。

注:E+L标准设定,按“向上键”,电机螺杆伸长;按“向下键”,电机螺杆缩短。

6.1.3 纠偏回中动作测试:按“回中键”,纠偏切换到回中模式,电机动作,带动导正机架回中。

6.1.4纠偏自动动作测试:按“自动键”,纠偏切换到自动模式,用材料遮挡电眼,电机会有相应动作。

将需要修改的参数修改完毕后,参照<四、DO2000 操作面板的参数保存方法>来保存一下0.A(ZC4071)的参数,保存完毕后,重启DO2000操作面板即可。

6.5 通过DO2000操作面板查看传感器波形(以查看OL80镜头波形为例)6.6 通过DO2000操作面板开启故障监视功能显示莱默尔(杭州)机电设备有限公司青岛办事处ERHARDT+LEIMER (Hangzhou) Co., Ltd Qingdao office. 地址:山东省青岛市市北区辽宁路153号颐中银街.首座1306室电话:0086-532-85816162传真:0086-532-85817072。

仿真调试软件PDS的使用(2)

仿真调试软件PDS的使用(2)

WIN98操作系统(梅林): 开始→关闭→重启到DOS →确定
DOS 操作系统(一技校): 开机后选择DOS操作系统即可。
二、启动仿真调试系统 1、启动PDS 首先将仿真 器与PC机相连,并接通仿真器 电源。接着在DOS状态下,执 行PDS命令,进入PDS系统。 命令格式:
PDS〔 options 〕〈回车〉
2、断点 在调试过程中,往往希 望全速执行的程序能在某 条指令前停下来,以便随 时查看执行的结果和状态。 断点就是这个停止点的地 址。
(1)Breakpoint︱Toggle (设置或清除断点,键F2) (2)Breakpoint︱Delete all (清除所有断点) (3)Breakpoint︱Enable (断点使能或禁止)
2、移动光标(见P183表1) 3、如何删除文件(寻找文件用DIR) 用快捷键ALT+X退回到DOS 键入 C:\SYBER\BIN>DEL 文件名 回车即删除该文件名的文件。 四、源程序汇编 源程序输入完毕,按Alt+R,或打 开RUN菜单,选择Assembler菜单 命令进行汇编(或直接按Alt+F9)。
〔 options 〕可选项包括: 不选—直接进入PDS系统,联 机运行,可调试用户系统的 软件和硬件。 /S—不使用仿真器,该状态 下可脱机运行与外围电路无 关的程序。
键入PDS并回车后,出现一个 窗口,如果长时间在右上角 处,有一“BUSY”字样闪烁, 则仿真器与PC机的通信存在 故障。出现通信故障时,按 〈 ESC 〉可终止通信。
实操顺序
1、3101 2、3105 3、3103 4、3104 3110 脱机(3晚) 3106 3108 3102 在线 3107 3109
一、PDS的安装

工缝机PDS打版软件操作说明书

工缝机PDS打版软件操作说明书
图案效果显示北京大豪科技股份有限40同一位置第一针最后一针用户指定位置花样中间位置图片中选择起点和结束点位置原点位置原点位置偏移北京大豪科技股份有限41327加固机bin花样管理为适应市场上仍存在大量面板为按键形式的套结钉扣机型软件内存花样格式为
北京大豪科技股份有限
工缝机 PDS 打版软件操作说明书
北京大豪科技股份有限 3.1.7 针法选择工具.............................................................................................................. 16 3.18 针迹巡航工具................................................................................................................ 16 3.1.8 辅助功能工具.............................................................................................................. 17 3.2 工艺模板工具使用.................................................................................................................. 18 3.2.1 线形套结模板(加固).............................................................................................. 18 3.2.2 半月形模板.................................................................................................................. 20 3.2.3 圆头孔形模板.............................................................................................................. 21 3.2.4 钉扣形模板.................................................................................................................. 22 3.2.5 锁眼模板...................................................................................................................... 22 3.2.6 编辑花样起始/结束位置............................................................................................ 27 3.2.7 加固机 BIN 花样管理.................................................................................................. 29 3.2.8 传输花样...................................................................................................................... 30 3.3 常用工具操作方法.................................................................................................................. 31 3.3.1 对象输入...................................................................................................................... 31 3.3.2 对象清单...................................................................................................................... 34 3.3.3 颜色/对象清单............................................................................................................ 34 3.3.4 针迹对象输入.............................................................................................................. 34 3.4 复杂工具操作方法.................................................................................................................. 38 3.4.1 字母绣图案编辑.......................................................................................................... 38 3.4.1.1 字母绣的整形.......................................................................................................... 40 3.4.2 主题花纹使用/编辑.................................................................................................... 40 3.4.2.1 主题花纹整形.......................................................................................................... 42 3.5 针法辅助功能.......................................................................................................................... 42 3.5.1 四大针法...................................................................................................................... 42

PDS 2000数字化防误操作系统技术说明书(201201111128)排版稿

PDS 2000数字化防误操作系统技术说明书(201201111128)排版稿

PDS 2000数字化防误操作系统技术说明书Ver 1.0国电南京自动化股份有限公司2012年01月版本声明本说明书适用于:PDS 2000数字化防误操作系统,其中后台版本V1.02 电脑钥匙版本V1.02 适配器版本V1.01。

产品说明书版本修改记录表* 技术支持电话:(025)52393607传真:(025)52393606* 本说明书可能会被修改,请注意核对实际产品与说明书的版本是否相符* 2012年1月第1版第1次印刷目录1 系统概述 (1)2 产品外观及特点 (2)2.1 PDS 2000后台软件界面 (2)2.2 PDS 201电脑钥匙 (2)2.3 PDS 202智能防误适配器 (3)2.4 电脑钥匙及智能防误适配器界面 (3)2.5 PDS 231部分附件及PDS232部分锁具 (4)3可选方案 (5)3.1 PDS 2000C微机型数字化防误操作系统 (5)3.2 PDS 2000Y一体化防误操作系统 (6)3.3 PDS 2000M模拟屏型数字化防误操作系统 (7)3.4 PDS 2000J集控站型数字化防误操作系统 (8)3.5 PDS 2000Z在线式防误操作系统 (10)3.6 系统支持的通讯方式 (11)4配套产品 (13)4.1 PDS 210智能钥匙管理机 (13)4.2 PDS 211临时接地线管理器 (14)4.3 PDS 212高压带电显示闭锁装置 (15)4.4 PDS 213在线闭锁装置 (16)5系统特点 (18)6主要技术条件 (19)6.1PDS2000防误闭锁主机技术指标 (19)6.1.1 软硬件要求 (19)6.1.2 系统容量 (19)6.2PDS201电脑钥匙技术指标 (19)6.3PDS202多功能适配器充电技术指标 (19)6.4电气编码锁技术指标 (20)6.5机械编码锁技术指标 (20)7 试验 (21)7.1证书 (21)7.2部分试验项目 (22)·系统概述·1 系统概述PDS 2000数字化防误操作系统是南京国电南自城乡电网自动化工程有限公司开发的新一代数字化防误操作系统。

  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

6.1.6 状态栏
底部状态栏主要显示当前操作按钮、当前选取对象、当前光标坐标、当前线型、当 前平面、当前显示比例等状态,极大的方便了用户操作。
6.1.7 作图区
窗口中间部分均为作图区域。作图区右侧和底部设有滚动条,当屏幕窗口不足以显示 画面范围时,可通过滑动滚动条来移动画面。作图区画面底色的选择方法是:按下 CTRL键,定位光标到所需的色块上,单击右键。作图区画面墙纸背景的选择方法是: 左键点击编辑菜单下“画面设置”选项,弹出画面设置对话框,如图6.7所示。左键 点击背景墙右侧 按钮,弹出文件选择对话框,选择需要的墙纸文件即可。 作图工具共提供了4种显示比例:1: 1、2:1、4:1、8:1。用户可以根据 不同的画面图幅大小选择相应的显示 比例,操作方法为左键点击主工具栏 的 按钮。
“状态设置确认”窗口
PDS2000数字化防误操作系统使用说明
第三章
设备逻辑
3.1逻辑编辑
点击设备逻辑工具栏 即进入逻辑编辑状态。点击想编辑逻辑的设备,将显示图3.1所 示窗口。点击“查找”,将显示设备的逻辑,点击“汉字》”,窗口将扩展并显示对应汉字 含义,如下图所示:
此时可以在窗口中编辑设备的格式。按“确认”后,如果逻辑错误,将出现如下图提示窗口, 如果逻辑检验通过,此设备的逻辑将更新。再次点击 出“逻辑编辑”状态。 将退
2.2.2 开票操作菜单
1 2
传送操作票到钥匙
如果传送成功,将显示成功提示窗口。否则显示如下失 败提示窗口,此时应进行相应检查。
失败提示窗口
2.2.2 开票操作菜单
3、点击 显示如下窗口: 将按照操作票的顺序待验证成功后,
1 2 3
4
操作票预演
4、点击 将出现“输入操作票名称”窗口, 如上图所示。设置相关选项后,点击“确定 ” 菜单项变灰为,即完成“预存该操作票”的操作。
2.2.2 开票操作菜单
8、点击 后,按“确定”即可 显示如下窗口,修改“起始票号”
1 2 3
4
5 6 7 8 9
10
“修改票号”窗口
9、点击 10、点击
即返回图形开票界面。 即退出图形开票模式。
2.2.3 手工开票
点击 将出现“手工开票”窗口,如下图所示。依次点击“电压等级”、 “设备类型”(或“主设备”)、“所操作设备”、“所进行操作”,在列表中选择 合适的选项。“操作信息”和“提示信息”中将出现对应的内容。此时点击 可将选 中的条目移入“操作内容”,点击 可所有条目移入“操作内容”。
操作下拉菜单内容
查看下拉菜单内容 皮肤下拉菜单内容
6.1.3 主工具栏
主工具栏将菜单中最常用的选项浓缩成按钮,并增加了水平影像、垂直影像、平面 设置、线型设定、显示比例、回退和重做等功能按钮。
6.1.4 图形工具栏
图形工具栏由图形编辑工具组成,共有直线、矩形、圆角矩形、圆、椭圆、多边形、 多义线、扇形、圆弧、文字等十个功能按钮。
1.1 系统启动
方法1:在桌面上直接点击“PDS2000”快捷方式图标; 方法2:在系统安装目录下打开PDS2000程序。例如:D:\PDS2000\exe\PDS2000.exe。 系统启动后,显示主界面如下图
选项卡 工具栏
主 画 面
注:图中显示接线图,会根据工程进行相应调整。此时主要操作功能被禁止,工具栏相 应图标灰色显示。
6.1.5 颜色栏
颜色栏包括调色板和网格栏。 调色板提供144种颜色供用户选择。选择方法是:线段或图形边框色的选择:定 位光标到所需色块上,单击左键;封闭图形的填充色选择:定位光标到所需色块上, 单击右键。 网格栏提供了六种网格式样、删除网格、删除填充色共八个按钮,具体使用方 法为:先为封闭图形选择一种填充色,然后定位光标到所需网格按钮上,单击右键。
6.1.8 平面
方便的右键快捷菜单
6.2 图形文件处理
以鼠标左键单击图形编辑窗口上部菜单条中的“文件”菜单,此时弹出下拉 菜单,包括新建图形、打开图形、打开本地图形、保存、另存为、退出系统等菜 单项,如下图所示:
6.2.1 图形保存
当生成了一幅新的图形,或者对已有图形进行修改后,需要对图形文件进行保存时,即 选用图形保存功能。 1、以鼠标左键单击图形编辑器上部主工具栏的保存图形按钮,此时若作图区无任何作图 内容,则系统会弹出提示对话框,不予保存;否则弹出画面保存对话框。
“数据库配置”窗口
PDS2000数字化防误操作系统使用说明
第六章 画面编辑
6.画面编辑
点击“常用操作”工具栏的“系统维护”,在下拉列表中选择“画面编 辑”,将出现“用户登录”窗口。输入密码并点击确定后,将显示图形编辑 工具主窗口,如下图所示:
6.1图形编辑工具界面
图形编辑工具采用了Windows的传统风格,采用标准菜单栏和工具条界面,简洁易 学。图形编辑工具主窗口由以下七部分组成:
标题栏 菜单栏 பைடு நூலகம்工具栏 作图区
图 形 工 具栏
颜色栏
状态栏
图形编辑工具主窗口
6.1.1标题栏
标题栏包含应用程序控制按钮、标题、图形名称、最小按钮及最大化按钮。
6.1.2 菜单栏
窗口顶部菜单栏包括文件、编辑、操作、皮肤、查看、帮助6项菜单。每项菜单又分 别具有丰富的下拉菜单。
文件下拉菜单内容
编辑下拉菜单内容
PDS2000数字化防误操作系统 使用说明
天水分公司固原压气站 2018年1月

第一章 第二章

登录和退出 常用操作
第三章 设备逻辑 第四章“其他”工具栏 第五章 系统配置 第六章 画面编辑 第七章 权限配置 第八章 日志查看 第九章 密码修改
PDS2000数字化防误操作系统使用说明
第一章登录和退出
2.2.2 开票操作菜单
5、点击 菜单项变灰为 完成“存入典型票库”的操作。 即
1 2 3
6、点击 将出现“手工开票”窗口,如下图 所示,操作说明见2.2.3。
4
5 6
2.2.2 开票操作菜单
7、点击 如下图所示: 将出现“操作票打印预览”窗口,
1 2 3
4
5 6 7
“操作票打印预览”窗口
确认无误后,点击“打印”即可打印操作票。
2.3.1钥匙学习
点击
将完成钥匙初始化的功能
2.3.2查找设备
点击 将出现下图 “查找设备”窗口。输入设备编号或设备名称,点击“确认” 后,鼠标将自动移动到要查找的设备上。
“查找设备”窗口
2.3.3 置位
点击 将出现“用户登录”窗口。选中用户并输入密码,点击“确定”后,即进 入“置位状态”。移动到需要置位的设备上,将出现提示窗口。点击设备,直到切换为 合适的状态,再次点击 将出现下图 “状态设置窗口”。点击“是”,设备即被置位, 点击“否”,设备将保持之前的状态。
此时应根据提示,确定合理的操作步骤。操作完成后,再次点击工具栏 “图形开票”图标,将显示开票操作菜单,如下图所示。
2.2.2 开票操作菜单
1、点击 待验证成功后,显示如下窗口:
1 2
2、点击
将显示如下窗口:
点击各列表框,在下拉列表中选择电压等级、运行方式 类别、运行方式内容、所操作线路名,将自动产生“操 作票名称”。点击“确定”,将显示如下提示窗口:
3.2逻辑导入
点击
将出现下图窗口。选择相应文件,即可导入以前备份的逻辑文件。
“导入五防逻辑”窗口
3.3逻辑导出
点击
将出现下图窗口。选择目录,输入文件名,即可导出逻辑文件。
“导出五防逻辑”窗口
3.4逻辑检查
点击 如果逻辑检查通过,将出现检查通过的窗口。否则,将出现“错误信息” 窗口,如下图所示:
1.4 退出登录
点击退出
点击“常用操作”工具栏中的“退出登录”可退出。此时点击最右边的“结 束运行”,可退出系统。
PDS2000数字化防误操作系统使用说明
第二章
常用操作
2.1 画面调整
常用操作”工具栏中的
可以调整画面。其中, “放大”:放大画面; “缩小”:缩小画面; “100%”:按原图大小显示; “整图”:一屏内显示整个画面; “重载画面”:重新加载画面。 此外,按住鼠标左键,鼠标变成
“手工开票”窗口的设置
2.2.3 手工开票
工具栏
“手工开票”窗口上方是工具栏,各图标功能如下: :调用典型票 :调用预存票 :调用历史票
:删除选中的操作票条目
:删除所有操作票条目
:对操作票进行五防验证
:输入打印使用的票号
:确认该操作票并退出
:作废正在编辑的操作票并退出
2.2.4 调用典型票
点击 将出现“调用典型票”窗口,如下图所示:
PDS2000数字化防误操作系统使用说明
第四章“其他”工具栏
4.1更换皮肤
点击“其他”工具栏的“皮肤”图标,可以更换界面的风格,如下图所示:
PDS2000数字化防误操作系统使用说明
第五章 系统配置
5.1系统配置
点击“常用操作”工具栏的“系统维护”,将显示相关选项,如下图所示:
点击“系统配置”,将出现“用户登录”窗口。输入密码并点击确定后,将显示 “数据库配置”窗口,如下图所示:
要观察220KV网图时,可选择1,2平面。全网图可选择1,2,3,4平面等等。
为了方便作图,本系统在作图时仅将当前平面设为活动平面,其余平面均为冻 结平面,显示状态为灰色。隐藏某一平面或更改平面名称,可以左键点击编辑菜单 下“图形属性”选项,弹出画面设置对话框,如图6.7所示。点击平面名称右侧的小
方框,可设置该平面的显示或隐藏。设置当前平面可以通过点击主工具栏的
“调用典型票”窗口
点击“确定”,将出现如下提示。此时可根据需要进行选择。
选择“是”或“否”,将出现“开票操作菜单”,如图2.3所示。此时可根据需要,选择 下一步操作。
相关文档
最新文档