H3C交换机忘记密码的解决办法
合集下载
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
选择Exit and reboot。
路由器重启后按几下Enter键就会直接进入特权模式,跳过了输入特权口令这个环节,这时候在全局配置模式下输入enable password new password,就可以将特权口令修改为new password了,这里要注意enable password这个命令要写全,否则系统会提示这是一个不正确的命令。
路由器重启后按几下Enter键就会直接进入特权模式,跳过了输入特权口令这个环节,这时候在全局配置模式下输入enable password new password,就可以将特权口令修改为new password了,这里要注意enable password这个命令要写全,否则系统会提示这是一个不正确的命令。
BOOTROM7.06
Boot Menu:
1: Download application program with XMODEM
2: Download application program with NET
3: Clear application password
4: Start up and ignore configuration
Set Succeeds
【第三步 选择a项重启系统】
Boot Menu:
1: Download application program with XMODEM
2: Download application program with NET
3: Set application file type
4: Display applications in Flash
BOOTROM 5.1清除密码是按ctrl+p
1、VRP97年版本,无法消除口令,则需要升级至2.0版本.
2、VRP 2.0版本
1> 上电自检时按“Shift+d",进入下载界面。
2> 出现口令后键入“*”
3> 键入“shift+3",即为输入“#”。
3、 vrp1.0版本
1> 上电自检时按“Ctrl+b",进入下载界面。
BOOTROM5.28
Press Ctrl-B to enter Boot Menu
Please input Boot ROM password:
Boot Menu:
1: Download application program with XMODEM
2: Download application program with NET
8: Boot Rom Operation Menu
9: Do not check the version of the software
a: Exit and reboot
Enter your choice(1-a): 6
Start up and ignore configuration, Are you sure?[Y/N]y
5: Enter debugging environment
6: Boot Rom Operation Menu
7: Do not check the version of the software
8: Exit and reboot
Enter your choice(1-8):
选择3然后再选择8重启路由器
3: Clear configuration
4: Start up and ignore configuration
5: Boot ROM Operation Menu
6: Do not check the version of the software
7: Exit and reboot
Enter your choice(1-7):
选Reboot。
华为93XX系列:
console口密码遗忘处理
如果配置文件已备份,启动时按Ctrl+B进入bootrom后,再按Ctrl+z进入隐藏菜单直接删除启动的配置文件后重启。
如果配置文件没有备份,启动时按Ctrl+B进入bootrom后,再按Ctrl+z进入隐藏菜单,将启动的配置文件改成其他名字,这样既可以进入concole口操作,又不会删除保存的配置文件。
5: Clear application password
6: Start up and ignore configuration
7: Enter debugging environment
Testing memory...OK!
128M bytes SDRAM
32768k bytes flash memory
Hardware Version is MTR 1.0
CPLD Version is CPLD 1.0
Press Ctrl-B to enter Boot Menu
Please input Bootrom password: /默认密码为空/
5: Clear application password
6: Start up and ignore configuration
7: Enter debugging environment
8: Boot Rom Operation Menu
9: Do not check the version of the software
* *
* Quidway Series Routers Boot ROM, V9.07 *
* *
********************************************
Copyright(C) 1997-2004 by HUAWEI TECH CO., LTD.
Compiled at 18:10:29 , Oct 14 2004.
2: Download Bootrom program
3: Modify Bootrom password
4: Exit the menu
5: Reboot
Enter your choice(1-5):
按ctrl+p后再选择5来清除密码
忽略配置清除密码再导入配置步聚
1、重新配置路由器的以太网口地址
[Router-Ethernet1]ip address 192.168.10.1 255.255.255.0
H3C交换机忘记密码的解决办法
低端路由器(25XX系列,25XXE系列,16XX系列,4001/4001E)清除特权密码
重启路由器;
看到"Press Ctrl+B enter BootMenu"的提示信息后,按Ctrl+b进入BootMenu菜单;
按Ctrl+p,屏幕上会显示几个"#"号和BootMenu的菜单;
选3会清除配置,选4会忽略配置以出厂设置启动
启运完毕后将路由器配置DOWN下后更改密码后再导入
BOOTROM5.1
Press Ctrl-B to enter Boot Menu
Please input Bootrom password:
Boot Menu:
1: Download application program
3: Set application file type
4: Display applications in Flash
5: Clear application password
6: Start up and ignore configuration
7: Enter debugging environment
新版本清除密码方法
AR路由器BOOTROM9.07清除CONSOLE密码:
Press Ctrl-B to enter Boot Menu
Please input Bootrom password:
Boot Menu:
1: Download application program with XMODEM
BOOTROM9.06
Boot Menu:
1: Download application program with XMODEM
2: Download application program with NET
3: Clear application password
4: Start up and ignore configuration
5: Enter debugging environment
6: Boot Rom Operation Menu
7: Do not check the version of the software
8: Exit and reboot
Enter your choice(1-8):
选3后选8重启路由器
7: Enter debugging environment
8: Boot Rom Operation Menu
9: Do not check the version of the software
a: Exit and reboot
Enter your choice(1-a):
选择5后选择a重启路由器
2、保证PC与路由器的以太网口能够互通
3、在路由器上配置一个FTP帐号用来从PC中DOWN配置
[Router]local-user ftp password sim ftp ftp-directory flash:/
4、启动路由器上的FTP服务
[Router]ftp-server enable
4、PC的运行栏中输入CMD
如何清除进入console配置口的密码
可以通过从BOOTROM中选择“忽略配置”启动路由器来获取和重新设备console的密码!
具体操作如下:
【第一步 重启路由器,按Ctrl+B进入BOOTROM菜单】
Starting at 0x1c00000...
********************************************
2> 出现口令后键入缺省为空,回车即可
3> 键入“Ctrl+p"。
删除密码后,第一次可以进入特权用户模式,但重新启动之后,还是向你索取密码。问题处在什么地方呢?原因是开发人员在设计时,只考虑让你消除密 码后进入一次,用来修改改口令,修改口令的命令是条隐含命令enable password,第一次进入后修改口令并存盘,即可消除或修改为你知道的密码。
Boot Menu:
1: Download application program with XMODEM
2: Download application program with NET
3: Set application file type
4: Display applications in Flash
2: Download application program with NET
3: Set application file type
4: Display applications in Flash
5: Clear application password
6: Start up and ignore configuration
a: Exit and reboot
Enter your choice(1-a): ignore configuration”,并确认】
Boot Menu:
1: Download application program with XMODEM
2: Download application program with NET
FTP 192.168.10.1
输入用户名ftp密码ftp
hash
lcd c:\ 指定下载后的配置文件目录
get config
然后用写字本或记事本打开更改密码后再put上去
注意:上传以后不需要再保存配置,若再SAVE配置,则上传的配置会被覆盖。
总结:BOOTROM 5.28/7.03/7.05/7.06/9.03/9.05/9.06/9.07清除密码的方式基本上是一样的,不外乎是 Clear application password或 是 Start up and ignore configuration
中端路由器(262X系列,36XX系列,36XXE系列,263X系列,263XE系列)清除特权口令
重启路由器;
看到"Press Ctrl+B enter BootMenu"的提示信息后,按Ctrl+b进入BootMenu菜单;
选择Clear application password,这样在下次启动时就不会提示输入特权口令;
路由器重启后按几下Enter键就会直接进入特权模式,跳过了输入特权口令这个环节,这时候在全局配置模式下输入enable password new password,就可以将特权口令修改为new password了,这里要注意enable password这个命令要写全,否则系统会提示这是一个不正确的命令。
路由器重启后按几下Enter键就会直接进入特权模式,跳过了输入特权口令这个环节,这时候在全局配置模式下输入enable password new password,就可以将特权口令修改为new password了,这里要注意enable password这个命令要写全,否则系统会提示这是一个不正确的命令。
BOOTROM7.06
Boot Menu:
1: Download application program with XMODEM
2: Download application program with NET
3: Clear application password
4: Start up and ignore configuration
Set Succeeds
【第三步 选择a项重启系统】
Boot Menu:
1: Download application program with XMODEM
2: Download application program with NET
3: Set application file type
4: Display applications in Flash
BOOTROM 5.1清除密码是按ctrl+p
1、VRP97年版本,无法消除口令,则需要升级至2.0版本.
2、VRP 2.0版本
1> 上电自检时按“Shift+d",进入下载界面。
2> 出现口令后键入“*”
3> 键入“shift+3",即为输入“#”。
3、 vrp1.0版本
1> 上电自检时按“Ctrl+b",进入下载界面。
BOOTROM5.28
Press Ctrl-B to enter Boot Menu
Please input Boot ROM password:
Boot Menu:
1: Download application program with XMODEM
2: Download application program with NET
8: Boot Rom Operation Menu
9: Do not check the version of the software
a: Exit and reboot
Enter your choice(1-a): 6
Start up and ignore configuration, Are you sure?[Y/N]y
5: Enter debugging environment
6: Boot Rom Operation Menu
7: Do not check the version of the software
8: Exit and reboot
Enter your choice(1-8):
选择3然后再选择8重启路由器
3: Clear configuration
4: Start up and ignore configuration
5: Boot ROM Operation Menu
6: Do not check the version of the software
7: Exit and reboot
Enter your choice(1-7):
选Reboot。
华为93XX系列:
console口密码遗忘处理
如果配置文件已备份,启动时按Ctrl+B进入bootrom后,再按Ctrl+z进入隐藏菜单直接删除启动的配置文件后重启。
如果配置文件没有备份,启动时按Ctrl+B进入bootrom后,再按Ctrl+z进入隐藏菜单,将启动的配置文件改成其他名字,这样既可以进入concole口操作,又不会删除保存的配置文件。
5: Clear application password
6: Start up and ignore configuration
7: Enter debugging environment
Testing memory...OK!
128M bytes SDRAM
32768k bytes flash memory
Hardware Version is MTR 1.0
CPLD Version is CPLD 1.0
Press Ctrl-B to enter Boot Menu
Please input Bootrom password: /默认密码为空/
5: Clear application password
6: Start up and ignore configuration
7: Enter debugging environment
8: Boot Rom Operation Menu
9: Do not check the version of the software
* *
* Quidway Series Routers Boot ROM, V9.07 *
* *
********************************************
Copyright(C) 1997-2004 by HUAWEI TECH CO., LTD.
Compiled at 18:10:29 , Oct 14 2004.
2: Download Bootrom program
3: Modify Bootrom password
4: Exit the menu
5: Reboot
Enter your choice(1-5):
按ctrl+p后再选择5来清除密码
忽略配置清除密码再导入配置步聚
1、重新配置路由器的以太网口地址
[Router-Ethernet1]ip address 192.168.10.1 255.255.255.0
H3C交换机忘记密码的解决办法
低端路由器(25XX系列,25XXE系列,16XX系列,4001/4001E)清除特权密码
重启路由器;
看到"Press Ctrl+B enter BootMenu"的提示信息后,按Ctrl+b进入BootMenu菜单;
按Ctrl+p,屏幕上会显示几个"#"号和BootMenu的菜单;
选3会清除配置,选4会忽略配置以出厂设置启动
启运完毕后将路由器配置DOWN下后更改密码后再导入
BOOTROM5.1
Press Ctrl-B to enter Boot Menu
Please input Bootrom password:
Boot Menu:
1: Download application program
3: Set application file type
4: Display applications in Flash
5: Clear application password
6: Start up and ignore configuration
7: Enter debugging environment
新版本清除密码方法
AR路由器BOOTROM9.07清除CONSOLE密码:
Press Ctrl-B to enter Boot Menu
Please input Bootrom password:
Boot Menu:
1: Download application program with XMODEM
BOOTROM9.06
Boot Menu:
1: Download application program with XMODEM
2: Download application program with NET
3: Clear application password
4: Start up and ignore configuration
5: Enter debugging environment
6: Boot Rom Operation Menu
7: Do not check the version of the software
8: Exit and reboot
Enter your choice(1-8):
选3后选8重启路由器
7: Enter debugging environment
8: Boot Rom Operation Menu
9: Do not check the version of the software
a: Exit and reboot
Enter your choice(1-a):
选择5后选择a重启路由器
2、保证PC与路由器的以太网口能够互通
3、在路由器上配置一个FTP帐号用来从PC中DOWN配置
[Router]local-user ftp password sim ftp ftp-directory flash:/
4、启动路由器上的FTP服务
[Router]ftp-server enable
4、PC的运行栏中输入CMD
如何清除进入console配置口的密码
可以通过从BOOTROM中选择“忽略配置”启动路由器来获取和重新设备console的密码!
具体操作如下:
【第一步 重启路由器,按Ctrl+B进入BOOTROM菜单】
Starting at 0x1c00000...
********************************************
2> 出现口令后键入缺省为空,回车即可
3> 键入“Ctrl+p"。
删除密码后,第一次可以进入特权用户模式,但重新启动之后,还是向你索取密码。问题处在什么地方呢?原因是开发人员在设计时,只考虑让你消除密 码后进入一次,用来修改改口令,修改口令的命令是条隐含命令enable password,第一次进入后修改口令并存盘,即可消除或修改为你知道的密码。
Boot Menu:
1: Download application program with XMODEM
2: Download application program with NET
3: Set application file type
4: Display applications in Flash
2: Download application program with NET
3: Set application file type
4: Display applications in Flash
5: Clear application password
6: Start up and ignore configuration
a: Exit and reboot
Enter your choice(1-a): ignore configuration”,并确认】
Boot Menu:
1: Download application program with XMODEM
2: Download application program with NET
FTP 192.168.10.1
输入用户名ftp密码ftp
hash
lcd c:\ 指定下载后的配置文件目录
get config
然后用写字本或记事本打开更改密码后再put上去
注意:上传以后不需要再保存配置,若再SAVE配置,则上传的配置会被覆盖。
总结:BOOTROM 5.28/7.03/7.05/7.06/9.03/9.05/9.06/9.07清除密码的方式基本上是一样的,不外乎是 Clear application password或 是 Start up and ignore configuration
中端路由器(262X系列,36XX系列,36XXE系列,263X系列,263XE系列)清除特权口令
重启路由器;
看到"Press Ctrl+B enter BootMenu"的提示信息后,按Ctrl+b进入BootMenu菜单;
选择Clear application password,这样在下次启动时就不会提示输入特权口令;