BC-01 使用说明书

无线充电参数：
输入功率：5V/2A 或9V/1.67A 输出功率：10W/7.5W/5W 无线充电距离3-6mm（max）
转换效率：慢充≥70%，快充≥75%工作频率：110-205KHz
蓝牙参数：
蓝牙版本：5.0工作频率：2.4G 声道：立体声
FM 频道：85-110MHz 蓝牙距离：≤10m TF 卡：最大支持32G
包装清单：
1*BC-01
1*汽车出风口夹子1*延长支架1*USB 数据线1*使用说明书
产品参数
产品名称：BC-01材料：防火 PC+ABS 颜色：黑色
使用方法
1.将夹子通过螺帽固定住本产品，确保支架可以灵活旋转
2.接通电源：将产品通过电源线连接汽车内USB 充电口（快充模式需要使用高通快充适配器）
3.按压出风口夹子固定至出风口，然后调整好位置并固定螺帽
4.蓝牙使用：
* BC01两边双灯闪烁为蓝牙模式，打开手机蓝牙，找到蓝牙设备BC01;进行连接配对
* BC01显示屏闪烁为FM 调频模式，将频率调至与汽车收音机同一频率（FM 调频时，将汽车收音机 的频率调整到当地无电台频点，然后再将BC01的频率和汽车收音机频率调节一致） *配对成功，播放音乐
*当放音乐时如果有杂音请上/下调整频率0.1MHZ 5.无线充电：
*将带无线充电功能的手机放置在支架上与产品贴近即可充电（建议先将蓝牙设置好再放置手机进行充电）
6.取出手机
触摸开合按键会自动打开支架，然后取出手机
特点
1. Qi 认证无线充电标准
2.快充支持10W/7.5W/5W，适用于安卓和苹果系统。

3. 无线支架感应：当手机摆放在无线蓝牙支架时，两边的夹臂会自动将手机夹住。

4. 异常感应：当支架上没有手机时，两边的夹臂会自动合拢。

5. 延伸支架可以灵活伸缩调节，可以很好的把手机调整到合适的位置，便于放置和取出。

6. 全新升级静音设计：使用静音马达，夹臂活动时没有马达噪音。

7. 360°旋转：支持360°角度旋转，便于找到最合适的位置对手机操作和放置取出
8. 带有过流保护、过热保护、短路保护功能，使用更安全9. 认证：FCC/CE/ROHS
保修服务
本产品自购买之日起十二个月内在正常使用情况下无材料和工艺缺陷。

保修服务需要购买证明。

消费者不应试图打开或拆卸设备，否则可能会造成损坏而导致保修失效。

Instructions
1.Adjust the screw cap to the best active status
2.Power supply:Connect the BC-01 Type-C port and car USB port (or charge adabtor)with the Type-C cable. Note:For fast wireless charging mode must use Qualcomm quick charge adaptor.
3.Press the button of clip to fix, then adjust the angle and tighten the fixed nut.
4.Bluetooth function：
*It's bluetooth mode when the two indictor flicker, then turn on smartphone bluetooth function and fund bluetooth device“BC01”to connect.
*It's FM mode when the display screen flicker, then set the BC01 channel as same as car radio channel(NOTE: car radio has no local radio program) *connected successful and enjoy music
*If there is any noise, please set car radio frequency up/down 0.1MHZ 5.Wireless charge：
*Smartphone must has wireless charge function
*Put your smartphone on the Bracket. (It's better after BC-01 bluetooth has connected your smartphone)6.Take off smartphone
Touch the open/close button ,the clips automatically open,then take your phone out.
Wireless charging specification：input：5V-2A or 9V-1.67A output: 10W/7.5W/5W Wireless charging
Distance: 3-6mm(max)
Conversion Efficiency：70%-75%Operating Frequency: 110-205KHz
Bluetooth specification:Bluetooth Version: 5.0Operating Frequency: 2.4G Sound Channel: Stereo FM Channel: 85-110MHz Bluetooth Distance：≤10m TF card: Maximum support 32G
Package：1*BC-011*Clip
1*Extended bracket 1*Type-C cable 1*User manuel
Product Specification
Product model：BC-01
Material：Fireproof PC+ABS Color：Black
Features:
1. Wireless changing for devices with Qi standard
2. Charging fast at 10W,7.5W and ordinary at 5W,compatible with Apple and Android devices.
3. Wireless charging sensing:when the phone with wireless charge receiver approaches the charger, the two clips will automatically clip the phone and charge wirelessly.
4. Foreign body detection sensing:when the phone with none of the receiver approaches the charger,the two clips will also automatically clip the phone,then use it for a phone holder.
5. The clips can extend and reteact flexibly,so easily fix phone to charge or release to use.
6. New upgrade mute design:Using the mute motor,the clips stretch and shrink with no noise.
7. 360°rotation: The handle supports 360°rotation,which enables you to find suitable directions to place your phone on or get you phone off.
8. Over-current protection,over-heat protection and short-circuit protection.9. Certification:FCC,CE,ROHS
Warranty
This device is free from defects in material and workmanship under normal use for twelve(12)months commencing upon the date of purchase. Proof of purchase is required for warranty service.The consumer should never attempt to open or disassemble the device,and doing so may cause damage that voids your warranty.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.。