DTR-1250-SM-LC-L2-AC-M中文资料

合集下载

UG中CAD中英文对照

U G术语中英对照表C A D部分A2C u r v e F i l l e t两曲线倒圆角2-D D i s t a n c e平面距离2D E x c h a n g e二维交换3-D D i s t a n c e空间距离A S i n g l e S y m b o l单个符号A b o v e P l a n e在平面上面A b o v e T e x t在文本上面A b s o l u t e c o o r d i n a t e s y s t e m（ A C S）绝对坐标系A c c e p t R e s u l t接受产生的结果A c t i v e v i e w激活视图A c t u a l实际的A d d a c o m p o n e n t s加一个组件A d d A t t r i b u t e S e a r c h t o F i l t e r给过滤器加属性搜索特性A d d E x c l u d e F i l t e r加排除过滤器A d d P r o x i m i t y F i l t e r加接近的过滤器A d d T a n g e n t E d g e s加相切边A d d t o F i l t e r加到过滤器A d d V i e w t o D r a w i n g加视图到图纸A d d V i e w加视图A d d Z o n e t o F i l t e r加区域到过滤器A d d i n g a v i e w d i s t a n c e加一个视图的距离A d d i n g a n o r t h o g r a p h i c v i e w加一个正投影视图A d d i n g e n t r i e s加记录A d d i n g m e m b e r s t o a s s e m b l y加成员到装配体中A d d i n g p o l e s加极点A d d i t i o n a l G D&T s y m b o l s增加的形位公差符号A d j a c e n c y T o l e r a n c e邻接公差A d j a c e n t E d g e s D e v i a t i o n邻接边偏差A d v a n t a g e s o v e r i n t e r p a r t e x p r e s s i o n s超过部件间表达式的优点 A f t e r T e x t在文本后面A l i g n对齐A l i g n c u r v e曲线对齐A l i g n V i e w对齐视图A l i g n i n g d r a w i n g v i e w s视图对齐A l i g n m e n t M e t h o d对齐方法A l i g n m e n t o p t i o n s对齐选项A l lB u t S e l e c t e d除被选择之外的所有对象A l l C o m p o n e n t s所有组件A l l O b j e c t s所有对象A l l o w D u p l i c a t e V a l u e s允许相同的值A l l o w s u b s t i t u t i o n允许替换A l o n g c u r v e沿曲线A l o n g d i r e c t i o n沿某一方向A l o n g d r i v e r n o r m a l s沿驱动的法向A l o n g f a c e n o r m a l s沿表面的法向A l o n g f i x e d v e c t o r沿定固定矢量方向A l o n g v e c t o r沿矢量方向A l t e r n a t e S o l u t i o n替换方法A l t e r n a t e T h i c k n e s s改变的厚度A l t e r n a t e s替换A l w a y s C o n f i r m一直确认A n a l y s i s a n d R e p o r t i n g F u n c t i o n s分析和报告功能A n a l y s i s D a t a S e t F u n c t i o n s分析数据集功能A n a l y s i s F u n c t i o n s分析功能A n a l y s i s t y p e分析类型A n a l y z e A n g l e分析角度A n a l y z e D i s t a n c e分析距离A n a l y z i n g分析A n c h o r a n d o r i e n t a t i o n p o i n t锚点和方位点A n c h o r p o i n t锚点A n g l e角度A n g l e t o l e r a n c e角度公差A n g l e角度A n g l e d e x t e n s i o n s角度延伸A n g u l a r角度的A n g u l a r d i m e n s i o n s角度尺寸A n g u l a r F o r m a t角度的格式A n g u l a r l a w角度规律A n g u l a r角度的A n g u l a r i t y角状A n i m a t i o n动画A n i s o t r o p i c m a t e r i a l各向异性材料A n n o t a t i o n E d i t o r注释编辑器A n n o t a t i o n P r e f e r e n c e s注释设置A N S I D i a m e t e r S y m b o l A N S I直径符号A N S I S p h e r i c a l D i a m e t e r S y m b o l A N S I球形直径符号A N S I S t a n d a r d S e c t i o n L i n e D i s p l a y A N S I标准截面线显示 A n s y s s o l v e r A n s y s求解器A N T装配导航工具A p e x s t r i n g顶点线A p p a r e n t i n t e r s e c t i o n p o i n t表观交叉点A p p e n d e d附加的A p p e n d e d T e x t附加的文本A p p e n d e d t e x t c o n t r o l s附加文本控制A p p l i c a t i o n c o n t e x t应用上下文A p p l i c a t i o n s应用A p p l i c a t i o n s o f W A V E W A V E的应用A p p l y F i l t e r使用过滤器A p p r o x i m a t e R h o近似的 R h o值A q u a m a r i n e碧绿色A r c弧A r c C e n t e r弧中心A r c L e n g t h弧长A r c/C i r c l e圆弧/圆周A r c/e l l i p s e c e n t e r弧/椭圆的中心A r c h i t e c t u r a l F e e t/I n c h e s建筑上的英寸/英尺A r c l e n g t h弧长A r e a F i l l区域填充A r e a l a w面积规律A r o w s e g m e n t箭头段A r r o w l i n e d i s p l a y箭头线显示A r r o w L i n e s箭头线A r r o w P o s i t i o n箭头位置A r r o w h e a d箭头A S C I I美国信息交换标准码A s p e c t R a t i o纵横比A s s e m b l i e s C l e a r a n c e装配间隙A s s e m b l y装配A s s e m b l y a n a l y s i s装配体分析A s s e m b l y C r o s s h a t c h i n g装配剖面线A s s e m b l y F i l t e r i n g装配过虑A s s e m b l y H i d d e n L i n e R e m o v a l装配隐藏线去除A s s e m b l y M o d e l i n g装配建模A s s e m b l y N a v i g a t o r装配导航器A s s e m b l y N a v i g a t o r T o o l装配导航工具A s s e m b l y p a r t装配部件A s s e m b l y p r e f e r e n c e s装配参数预设置A s s e m b l y v i e w s装配视图A s s e m b l y Z o n e装配区域A s s o c i a t e N o t e相关注释A s s o c i a t e d O b j e c t s关联对象A s s o c i a t i v e d i r e c t i o n关联方向A s s o c i a t i v e o f f s e t s相关偏置A s s o c i a t i v e t a p e r p l a n e r e f e r e n c e p o i n t相关的拔模面参考点 A s s o c i a t i v e V i e w S c a l e相关视图比例A s s o c i a t i v e关联的A s s o c i a t i v i t y相关性A s s o c i a t i v i t y M a n a g e r关联性管理器A s s o c i a t i v i t y o f u t i l i t y s y m b o l s实用符号的相关性A t a n g l e t o v e c t o r与矢量方向成角度A t t a c h e d T a r g e t附着的目标体A t t a c h m e n t m e t h o d s附着方式A t t r i b u t e e d i t o r属性编辑器A t t r i b u t e F i l t e r属性过滤器A t t r i b u t e N a m e属性名A t t r i b u t e T y p e属性类型A t t r i b u t e s属性A t t r i b u t e s F r o m A l l O b j e c t s从所有对象得到的属性A t t r i b u t e s F r o m O n e O b j e c t从一个对象的属性A t t r i b u t e s h i e r a r c h y属性级别A u t o d i m e n s i o n自动尺寸标注A u t o O r d i n a t e D i m e n s i o n s自动坐标尺寸标注A u t o m a t i c自动的A u t o m a t i c P l a c e m e n t自动放置A u t o m a t i c P r e v i e w自动预览A u t o m a t i c R e c t a n g l e自动生成矩形A u t o m a t i c U p d a t e自动更新A u t o-s i z e C e l l s自动大小的单元A u x i l i a r y辅助的A u x i l i a r y V i e w辅助视图A x i s轴A x i s y m m e t r i c a n a l y s i s轴对称分析A x i s y m m e t r i c l o a d i n g轴对称加载[p a g e c u t e]BB a c k g r o u n d背景B a l l球形B a l l E n d G r o o v e球端槽B a n d w i d t h带宽B a s e A n g l e基本角B a s e D i a m e t e r基本直径B a s e p a r t基础部件B a s e p o i n t基点B a s e V i e w基本视图B a s e l i n e基线B a s i c c o n c e p t s o f G e o m e t r i c T o l e r a n c i n g几何公差的基本概念 B a s i cC u r v e s基本曲线B a t c hC h e c k批量检查B e a d小球垫圈B e f o r e T e x t在文本前B e l o w P l a n e在平面下B e l o w T e x t在文本下B e n d A l l o w a n c e F o r m u l a弯边许用公式B e n d P o s i t i o n弯边位置B e n d R e p o r t弯边报告B e n d s e g m e n t弯边段B e n d s e q u e n c e t a b l e弯边顺序表B e z i e r s p l i n e贝塞尔样条B i-d i r e c t i o n a l A s s o c i a t i v i t y双向相关性 B i l a t e r a l双面的B i l l o f M a t e r i a l(B O M)材料明细表B i n o r m a l副法线B l a n k隐藏B l a n kC o m p o n e n t隐藏组件B l a n k N o d e隐藏节点B l a n k i n g隐藏B l e n d倒圆B l e n d A l l I n s t a n c e s给所有的引用倒圆角 B l e n d s o l i d e d g e实体边缘倒圆B l e n d t y p e s倒圆类型B l e n d i n g f u n c t i o n倒圆功能B l o c k块B l u e蓝色B o d y e x t e n t s(物)体范围B o d y o f r e v o l u t i o n旋转体B o d y体B o o l e a n o p e r a t i o n布尔运算B o s s凸台B o t t o m俯视图B o t t o m-u p m o d e l i n g自底向上建模B o u n d b y o b j e c t s由物体确定边界B o u n d a r y边界B o u n d a r y p o i n t边界点B o u n d a r y t y p e s边界类型B o u n d e d P l a n e具有边界的平面B o u n d e d P l a n e s边界平面B o x最小盒子方法B r e a k L i n e/D e t a i l截断线/局部放大图B r e a k-O u t S e c t i o n V i e w截除的剖视图B r i d g e桥接B r i d g eC u r v e桥接曲线B r i d g e D e p t h桥接深度B r i d g e S h e e t桥接片体B r i d g e S k e w桥接扭曲B r i d g e S u r f a c e桥接面B r o k e n L i n k s打断的链接B r o w n褐色B-s p l i n e B-样条线B-s u r f a c e B-曲面B u i l t-i n内置的B u n d l e捆B u n d l e_i d捆的标识符B y c o r n e r s按拐角分段B y e q u a l s e g m e n t s按等长分段B y E q u a t i o n按方程式B y F a c e N o r m a l s通过面法向B y i n p u t a r c l e n g t h s e g m e n t s按输入的弧长分段B y k n o t p o i n t s e g m e n t s按节点分段B y l a w c u r v e按规律曲线B y p o i n t s通过点B y p o l e s通过极点B y s e g m e n t s按段数B y t o l e r a n c e按公差[p a g e c u t e]CC a l c u l a t o r c a p a b i l i t i e s计算器功能C a l l o u t s插图的编号C a l l o u t s a n d S y m b o l s插图的编号和符号C A M O b j e c t s C A M对象C A M V i e w s C A M视图C a n c e l取消C a n c e l C h a i n取消链C a n n e d l a y o u t储存的布局C a n n e d v i e w储存的视图C a r t e s i a n笛卡尔（直角坐标系）C a t e g o r i s e分类C a t e g o r y目录C e n t e r中心C e n t e r J u s t i f y中心对齐C e n t e r L i n e w i t h E x t e n s i o n有延伸线的中心线C e n t e r L i n e中心线C e n t e r P o i n t中心点C e n t e r l i n e C o m p o n e n t中心线元件C e n t e r l i n e P r o j e c t i o n中心线投影C e n t e r l i n e P r o j e c t i o nD e f i n i t i o n中心线投影定义 C e n t e r l i n e P r o j e c t i o n D e f i n i t i o n中心线投影定义 C e n t e r l i n e P r o j e c t i o n V e c t o r中心线投影矢量C G M C G M格式文件C h a i n链C h a i n C u r v e s链状曲线C h a i n i n g链接C h a i n i n g T o l e r a n c e链公差C h a m f e r倒角C h a m f e r e d g e s边缘倒角C h a m f e r O f f s e t倒角偏移C h a n g eD e g r e e改变阶数C h a n g e E d g e改变边C h a n g e M a r g i n改变边缘C h a n g e R e f e r e n c e S e t改变引用集C h a n g e s t i f f n e s s改变刚度C h a n g e w e i g h t s改变权值C h a r a c t e r字符C h a r a c t e r S i z e字符大小C h a r a c t e r S p a c i n g字符空间C h a r a c t e r i s t i c特性C h e c k f o r o v e r l a p s重叠部分检查C h e c k G e o m e t r y检查几何体C h e c k O v e r l a p p i n g检查重叠C h e c k-I n签到C h e c k i n g t h e f o r m a t检查格式C h i l d C o m p o n e n t s子组件C h o o s e a l i g n m e n t o p t i o n s选择对齐选项C h o o s e a n o p t i o n选择一个选项C h o o s e A t t r i b u t e s选择属性C h o o s e e d i t o p t i o n选择编辑选项C h o o s e E x p r e s s i o n s选择表达式C h o o s e m e t h o d选择方法C h o o s e N a m e d O b j e c t选择命名的对象C h o o s e P a r t F i l e选择U G文件C h o o s e v i e w d i s p l a y o p t i o n s选择视图显示选项 C h o r d a lD e v i a t i o n弦长偏差C h o r d a l T o l e r a n c e弦长公差C i r c l e圆C i r c l e a r r a y圆形阵列C i r c u l a r b o u n d a r y圆形边界C i r c u l a r e x t e n s i o n圆形延伸C L f i l e刀位文件C L P o i n t刀位点C l a m p装夹C l a s s S e l e c t i o n分类选择C l a s s s e l e c t i o n s u b f u c t i o n分类选择子功能C l a s s s e l e c t i o n t o o l s分类选择工具C l e a r清除C l e a r a n c e a n a l y s i s间隙分析C l e a r a n c e z o n e间隙区域C l i f f E d g e s悬崖边C l i f f E d g e O v e r f l o w s悬崖边溢流C l o c k I n s t a n c e顺时针引用分布C l o n e a s s e m b l y克隆装配C l o n i n g克隆C l o s e P a r t关闭部件C l o s e关闭C l o s e d A r r o w h e a d封闭箭头C l o s e d b o d i e s封闭体C l o s e d d e f i n i n g p o i n t s封闭的定义点C l o s e d i n U U向封闭C l o s e d i n V V向封闭C o d e s e t代码集C o i n c i d e n t共点C o l l a p s e装配树合并C o l l a p s e A l l使所有装配树合并C o l o r颜色C o l o r l e g e n d颜色图标C o l o r， f o n t a n d w i d t h o p t i o n颜色、线型和宽度选项 C o l o r/F o n t/W i d t h P r e f e r e n c e s颜色、线型和宽度预设置 C o l u m n列C o l u m n d e g r e e列的阶数C o m b i n e d c u r v e p r o j e c t i o n s组合曲线的投影C o m b i n e d P r o j e c t i o n组合投影C o m m o n F r a c t i o n公共片断C o m m o n t o o l s公共工具C o m p N a m e部件名C o m p o n e n t组件C o m p o n e n t m e m b e r s组件成员C o m p o n e n t o b j e c t组件对象C o m p o n e n t s a d d e x i s t i n g p a r t向组件中加入已存的部件 C o m p o n e n t s A r r a y s组件阵列C o m p o n e n t s F i l t e r s组件过滤器C o m p o n e n t s O p e r a t i o n s组件操作C o m p o n e n t s S e t s组件集C o m p o s i t e F C F组合的F C FC o m p o s i t e F e a t u r e c o n t r o l F r a m e组合特征控制框架C o m p u t e d c u r v e s计算的曲线C o n c e n t r i c同心的C o n c e n t r i c C i r c l e s同心圆C o n c e n t r i c i t y同心C o n c r e t e具体的C o n c u r r e n t E n g i n e e r i n g并行工程C o n d i t i o n a l a n n o t a t i o n条件注释C o n d u i t导管C o n d u i t T o o l s导管工具C o n e圆锥C o n eD e p t h圆锥深度C o n e d i r e c t i o n圆锥方向C o n e o r i g i n圆锥底面圆心C o n f i r m w i t h C t r l-M B1用C t r l加鼠标左键确认 C o n f i r m a t i o n确认C o n i c二次曲线C o n i c R h o二次曲线 R h o值C o n i c a l T a p e r二次方拔模C o n n e c t i o n连接C o n s t a n t常量C o n s t a n t O f f s e t s常量偏移C O N S T A N T P A R A M E T E R C U R V E等参曲线C O N S T A N T X-O F F S E T常X向偏移C o n s t r a i n o p t i o n s约束选项C o n s t r a i n tD i r e c t i o n约束方向C o n s t r a i n t s约束C o n s t r u c t e d c u r v e s构造的曲线C o n s t r u c t i o n P o i n t s构造点C o n t a c t m e s h接触网格C o n t a i n m e n t I n t e r f e r e n c e包容干涉C o n t i g u o u s邻近的C o n t i n u i t y C h e c k s连续性检查C o n t i n u i t y m e t h o d连续性方式C o n t i n u i t y t y p e连续性类型C o n t o u r轮廓C o n t o u r C u r v e轮廓曲线C o n t o u r L e n g t h轮廓长度C o n t o u r l i n e s轮廓线C o n t o u r p l o t轮廓图C o n t r o l P o i n t控制点C o n t r o l P o l y g o n控制多边形C o n t r o l s t r u c t u r e控制结构C o n t r o l v e r t e x控制顶点C o n v e r t转换C o n v e r t d e p e n d e n c y转换相关性C o n v e r t N o n-A s s o c i a t i v e G D&T转换非关联的G D&T C o o r d i n a t e s y s t e m坐标系统C o o r d i n a t e S y s t e m A x i s坐标系统轴C o p y拷贝C o p y c o m p o n e n t拷贝组件C o p y F i l t e r拷贝过滤器C o p y g e o m e t r y拷贝几何体C o p y m e t h o d拷贝方法C o p y O b j e c t拷贝对象C o p y P a t h拷贝路径C o p y T o F i l t e r拷贝到过滤器C o p y V i e w s拷贝视图C o p y i n g d r a w i n g v i e w s拷贝图纸视图C o u n t e r b o r e台阶孔C o u n t e r c l o c k w i s e逆时针C o u n t e r s i n k埋头孔C o u r s e o b j e c t i v e s课程目的C r e a t e建立,生成,创建C r e a t e a C o m p o n e n t s A r r a y s建立组件阵列C r e a t e a c y l i n d r i c a l c e n t e r l i n e建立圆柱体的中心线C r e a t e a h a l f s e c t i o n v i e w建立一个半剖视图C r e a t e a H e l i c a l S p l i n e建立一个螺旋样条线C r e a t e a l i n e a r c e n t e r l i n e建立一条线型中心线C r e a t e a n e w d r a w i n g建立一个新的图纸C r e a t e a r e v o l v e d s e c t i o n v i e w建立一个旋转剖视图C r e a t e a s i m p l e s e c t i o n v i e w建立一个简单剖视图C r e a t e a T a b u l a r N o t e建立一个表格说明C r e a t e a n o f f s e t c e n t e r p o i n t建立一个偏置的中心点C r e a t e a n u n f o l d e d s e c t i o n c u t建立一个展开的剖视图C r e a t e a n d E d i t i n g A s s e m b l i e s建立和编辑装配C r e a t e a n i m a t i o n建立动画C r e a t e A s s e m b l yD i a g r a m建立装配图表C r e a t e A u t o O r d i n a t eD i m e n s i o n建立自动坐标尺寸C r e a t e A u x i l i a r y V i e w建立辅助视图C r e a t e B r e a k o u t S e c t i o n V i e w建立截除的剖视图C r e a t e C r o s s h a t c h i n g生成剖面线C r e a t eD e t a i l V i e w生成详细视图C r e a t eD i m e n s i o n标注尺寸C r e a t eD r a w i n g建立图纸C r e a t e e x p l o d e v i e w s建立爆炸视图C r e a t e f a m i l y m e m b e r s建立族的成员C r e a t e F i l t e r生成过滤器C r e a t e G D&T S y m b o l s建立形位公差符号C r e a t e G D&T s y m b o l s w i t h a l e a d e r建立带引导线的形位公差符号 C r e a t e GD T S y m b o l建立(标注)G D T符号C r e a t e G e o m e t r i c E x p r e s s i o n建立几何表达式C r e a t e ID S y m b o l建立(标注)I D符号C r e a t e I n f e r r e dD i m e n s i o n建立(标注)推测尺寸C r e a t e K a n j i生成K a n j i汉字C r e a t e L a b e l建立(标注)标记C r e a t e L e a d e r建立(标注)引导线C r e a t e l i n k e d p a r t建立链接部件C r e a t e N a m e d F i l t e r建立命名的过滤器C r e a t e n e w l e v e l建立新的一级C r e a t e N e w M u l t i p l eD a t u m R e f e r e n c e建立新的多基准面参考 C r e a t e N e w P a r t建立新部件C r e a t e N o t e建立注释C r e a t e o nD i m e n s i o n在尺寸上建立C r e a t e o n E d g e在边上建立C r e a t e o n E x t e n s i o n在延伸线上建立C r e a t e o n P o i n t在点上建立C r e a t e o r E d i tD a t u m s建立或编辑基准面C r e a t e o r S e l e c t s y m b o l t o e d i t建立或选择符号来编辑C r e a t e O r d i n a t eD i m e n s i o n生成坐标尺寸C r e a t e O r d i n a t e M a r g i n生成坐标尺寸标注边界C r e a t e O r d i n a t e S e t建立坐标组C r e a t e P a t h建立路径C r e a t e p a t t e r n d a t a建立模式数据C r e a t e P r o x i m i t y F i l t e r建立相近的过滤器C r e a t e S e c t i o n L i n e生成截面线C r e a t e S e c t i o n V i e w生成界面视图C r e a t e S e c t i o n V i e w s建立剖视图C r e a t e t e x t w i t h a l e a d e r建立带引导线的文本C r e a t e T o l e r a n c e F e a t u r e生成公差特征C r e a t e T o l e r a n c e V i e w O r i e n t a t i o n生成公差视图方向C r e a t e U t i l i t y S y m b l o s建立实用符号C r e a t e U t i l i t y S y m b o l生成I D符号C r e a t e w i t h L e a d e r建立带箭头标注C r e a t e w i t h o u t L e a d e r建立不带箭头标注C r e a t e/E d i tD a t u m建立/编辑基准面C r e a t e d i n a n a s s e m b l y在一个装配中建立C r o s s s e c t i o n横截面C r o s s S p l i n e s交叉样条线C r o s s s t r i n g s交叉线串C r o s s h a i r s光标十字交叉线C r o s s h a t c h a n d A r e a F i l l T o l e r a n c e剖面线和区域填充公差 C r o s s h a t c h i n g剖面线C r o s s h a t c h i n g a d j a c e n c y t o l e r a n c e剖面线邻近公差C S Y S坐标系C S Y S M e t h o d坐标系方法C u b i c三次的C u b i c f i t s u r f a c e三次拟合曲面C u r r e n t C r o s s h a t c h F i l e当前剖面线文件C u r r e n tD i r e c t o r y当前目录C u r r e n t L a y o u t当前布局C u r r e n t p a r a m e t e r s当前参数C u r r e n t P a r t当前部件C u r r e n t S e t当前组C u r r e n t v i e w当前视图C u r s o r光标C u r s o r l o c a t i o n光标定位C u r v a t u r e曲率C u r v a t u r e a n a l y s i s曲率分析C u r v a t u r e c o m b曲率梳C u r v a t u r e m e t h o d曲率方法C u r v e曲线C u r v e a n a l y s i s曲线分析C u r v e a n a l y s i s d i s p l a y曲线分析显示C u r v e C h a m f e r曲线倒直角C u r v e c r e a t i o n曲线建立C u r v e d i v i d e c u r v e用曲线分割曲线C u r v e e x t e n s i o n曲线延伸C u r v e f i t c r e a t i o n m e t h o d s曲线拟合的建立方式C u r v e f i t w i t h t e m p l a t e使用模板来拟合曲线C u r v e m e s h曲线网格C u r v e t o f a c e o p t i o n曲线到表面的选项C u s t o m m e n u b a r客户化菜单条C u t A n g l e剖切角C u t F i l t e r剖切过滤器C u t l i n e剖切线C u t O b j e c t剖切对象C u t P o s i t i o n剖切位置C u t s e g m e n t剖切段C u t T h r o u g h M o d e l通过模型剖切C y a n蓝绿色C y c l e周期，循环C y l i n d e r圆柱体C y l i n d r i c a l圆柱的C y l i n d r i c a l C e n t e r l i n e圆柱中心线C Y L I ND R I C A L C R O S S SE C T I O N圆柱剖切C y l i n d r i c a l F a c e圆柱面C Y L I ND R I C A L O R IE N T A T I O N圆柱方位C y l i n d r i c a l t a r g e t a r e a e n d p o i n t圆柱目标区域端点C y l i n d r i c a l t a r g e t a r e a s t a r t p o i n t圆柱目标区域起点[p a g e c u t e]DD a r k R e d暗红色D a s h e d虚线D a s h e d H i d d e nE d g e s虚线隐藏边D a t a B a s e数据基础（库）D a t a M o d e l数据模型D a t a P o i n t s数据点集D a t e/T i m e日期和时间D a t u m基准D a t u m a x i s基准轴D a t u mE d i t o r基准编辑器D A T U M I DE N T IF I E R基准标识器D a t u m p l a n e基准平面D a t u m P l a n e-D u a l C o n s t r a i n t s基准平面－双约束D a t u m P l a n e-S i n g l e C o n s t r a i n t s基准平面－单约束D E B U G C O N T R O L调试控制D e f a u l t缺省D e f a u l t R a d i u s缺省半径D e f i n e定义D e f i n e T o r u s定义圆环D e f i n e A r r o w D i r e c t i o n定义箭头方向D e f i n e C o m p o n e n t S e t定义组件集D e f i n e C u t D i r e c t i o n定义切削方向D e f i n e D i r e c t i o n定义方向D e f i n e F i l t e r定义过滤器D e f i n e H i n g e L i n e定义铰链线D e f i n e o f f s e t p o s i t i o n定义偏移位置D e f i n e r e f e r e n c e l i n e定义参考线D e f i n e S e c t i o n L i n e定义截面线D e f i n e S y m b o l定义符号D e f i n e V i e w B o u n d a r y定义视图边界D e f i n i n g a U GE x p r e s s i o n t a b l e定义一个U G表达式表D e f i n i n g F a c e定义表面D e f i n i n g H o l e s,w i t h i n b o u n d e d p l a n e在边界平面内定义孔 D e f i n i n g p o i n t s定义点集D e f i n i n g t h e A s s e m b l y S t r u c t u r e定义装配结构D e f i n i n g t h e d a t u m o r i g i n定义基准原点D e f i n i n g t h e p l o t t e r定义绘图仪D e f i n i n g t h e s e c t i o n v i e w d i s p l a y定义剖视图显示D e f o r m S h e e t变形片体D e g r e e阶数D e g r e e g r e a t e r t h a n m a x i m u m阶数大于最大值D e g r e e l e s s t h a n m i n i m u m阶数小于最小值D e g r e e-o f-F r e e d o m a r r o w s自由度箭头D e g r e e-o f-F r e e d o m i n d i c a t o r s自由度指示器D e l a y i n t e r p a r t u p d a t e s延迟部件间更新D e l a y e d u p d a t e延迟更新D e l e t e删除D e l e t e a l l e d i t s删除所有编辑D e l e t e D r a w i n g删除图纸D e l e t e F e a t u r e删除特征D e l e t e F i l t e r删除过滤器D e l e t e O b j e c t删除对象D e l e t e P a t h删除路径D e l e t e p o s i t i o n i n g d i m e n t i o n删除定位尺寸D e l e t e s e l e c t e d e d i t s删除选择的编辑D e l e t e s e l e c t e d e r a s u r e s删除选择的擦除D e l e t e T o o l p a t h删除刀轨D e l e t e i n g p a r e n t g e o m e t r y删除父几何体D e l e t i n g a u t i l i t y s y m b o l删除一个实用符号D e l t a增量D e l t a O f f s e t增量偏置D e p e n d e n t相关D e p t h深度D e r i v a t i v e V e c t o r派生矢量D e s c r i p t i o n描述D e s c r i p t o r描述符D e s e l e c t i s o c l i n e s取消选择等参线D e s e l e c t i o n取消选择D e s i g n i n C o n t e x t按上下文设计D e s i g n r u l e设计法则D e s i g n T e m p l a t e设计模板D e s t i n a t i o n c o o r d i n a t e s y s t e m目标坐标系统D e s t i n a t i o n L a y e r目标层D e s t i n a t i o n P o i n t目标点D e t a i l详图D e t a i l c e n t e r i n p a r e n t v i e w在父视图中的详图中心 D e t a i l D e s i g n详细设计D e t a i l F i l t e r i n g细节过滤D e t a i l o f S e c t i o n剖面详图D e t a i l V i e w详细视图D e v i a t i o n偏差D e v i a t i o n A n a l y s i s偏差分析D e v i a t i o n c h e c k偏差检查D i a g r a m图表D i a l o g对话框D i a l o g B a r对话工具条D i a l o g B a r F i e l d s对话工具条区域D i a l o g M a n a g e r对话管理D i a l o g P r e f e r e n c e s对话框参数预设置D i a m e t e r S y m b o l直径符号D i a m e t e r直径D i eE n g i n e e r i n g冲模工程D i e_p u n c h_r a d i u s模具冲压半径D i g i t a l P r e-A s s e m b l y(D P A)数字预装配D i m e n s i o n C o n s t r a i n t s尺寸约束D i m e n s i o n F i l t e r尺寸过滤器D i m e n s i o n L o c a l S e t t i n g s尺寸局部设置D i m e n s i o n P r e c i s i o n尺寸精度D i m e n s i o n s尺寸D i r e c t i o n方向D i r e c t i o n M e t h o d定向方式D i r e c t i o n p o i n t定向点D i r e c t o r y目录D i r e c t o r yE n t r y S e c t i o n目录登录区D i s c a r d放弃D i s c o n t i n u i t y i n C u r v e曲线不连续D i s p l a y D i m e n s i o n s显示尺寸D i s p l a y D r a w i n g显示图纸D i s p l a y F i l e显示文件D i s p l a y I n s t a n c eE d i t o r显示引用特征编辑器 D i s p l a y l a b e l显示标记D i s p l a y O b j e c t显示对象D i s p l a y O p t i o n s显示选项D i s p l a y P a r e n t显示父D i s p l a y P r e f r e n c e s显示参数预设置D i s p l a y S e l e c t e d P a r t显示所选部件D i s p l a y T y p e显示类型D i s p l a y e d P a r t显示部件D i s t a n c e a n d A n g l e距离及角度D i s t a n c e N o r m a l t o C u r v e垂直于曲线的距离 D i s t a n c e T o l e r a n c e距离公差D i s t a n c e V a l u e距离值D i s t a n c e距离D i s t o r t i o n M e t h o d变形方法D i s t o r t i o n变形D i v i d e C u r v e分割曲线D i v i d e d C i r c l e分割圆周D i v i d e d H e x a g o n分割了的六边形D i v i d e d S q u a r e分割了的正方形D i v i d e d S y m b o l s分割符号D o c u m e n t T a g文件标签D o t t e d D a s h e d点划线D o u b l e o f f s e t c h a m f e r双边偏置倒角D o u b l e-A r c-B l e n d双圆弧倒圆D o v e T a i l S l o t燕尾槽D r a f t A n g l e拔模角度D r a f t H e i g h t拔模高度D r a f t i n g制图D r a f t i n g A n n o t a t i o n制图标注D r a f t i n g A p p l i c a t i o n制图应用D r a f t i n g A s s o c i a t i v i t y制图相关性D r a f t i n g O b j e c t A l i g n m e n t制图对象对齐D r a f t i n g O b j e c t A l i g n m e n t P r e f e r e n c e s制图对象对齐预设置 D r a f t i n g O b j e c t C o l o r/F o n t/W i d t h制图对象颜色/字体、宽度 D r a f t i n g P r e f e r e n c e s制图预设置D r a f t i n g S y m b o l F i l t e r制图符号过滤器D r a f t i n g S y m b o l s制图符号D r a g拖曳D r a w i n g图纸D r a w i n g B o r d e r s图纸边框D r a w i n g L a y o u t图纸布置D r a w i n g M e m b e r V i e w D i s p l a y S e t t i n g s图纸成员视图显示设置 D r a w i n g M e m b e r V i e w R e n d e r S e t s图纸成员视图着色集D r a w i n g O p e r a t i o n s制图操作D r a w i n g S h e e t图页D r a w i n g V i e w B o u n d a r i e s图纸视图边界D r a w i n g V i e w s图纸视图D r i v e C u r v e s驱动曲线D r i v e r T y p e驱动类型D u a l C o n s t r a i n t s双重约束D u a l D i m e n s i o n F o r m a t a n d U n i t s双尺寸格式和单位D X F t o U n i g r a p h i c s从D X F转换到U GD y n a m i c D e v i a t i o n A n a l y s i s动态偏差分析[p a g e c u t e]EE d g e a n d C r o s s T a n g e n t s边缘与相交切线E d g e a n d N o r m a l s边缘与法线E d g e B l e n d边倒圆角E d g e C h a m f e r边倒直角E d g e C u r v a t u r e边缘曲率E d g e d e v i a t i o n边缘偏差E d g e H i d i n g E d g e边缘隐藏边缘E d g e O n l y仅边缘E d g e t oF a c e边缘到表面E d i t编辑E d i t a T a b u l a r N o t e编辑表格注释E d i t A l i g n m e n t对齐编辑E d i t A n g l eF e a t u r e编辑角度特征E d i t A n n o t a t i o n编辑注释E d i t A r c L e n g t h编辑弧长E d i t B o o l e a n编辑布尔运算E d i t B r e a k o u t S e c t i o n V i e w编辑剖切视图E d i t C e n t e r l i n e编辑中心线E d i t C h a r a c t e r i s t i c s编辑特性E d i t C r o s s h a t c h B o u n d a r y编辑剖面线边界E d i t C u r r e n t D r a w i n g编辑当前图纸E d i t C u r v e编辑曲线E d i t C u r v e P a r a m e t e r s编辑曲线参数E d i t D i m e n s i o n A s s o c i a t i v i t y编辑尺寸相关性E d i t D i m e n s i o n s编辑尺寸E d i t D r a f t i n g O b j e c t A s s o c i a t i v i t y编辑绘图对象的相关性 E d i t D r a w i n g编辑图纸E d i t D u r i n g U p d a t e更新期间编辑E d i t E n t i r e S e g m e n t s编辑整段E d i t E x t r a c t R e g i o n编辑抽取的区域E d i tF e a t u r e编辑特征E d i tF e a t u r e P a r a m e t e r s编辑特征参数E d i tF i l l e t编辑倒角E d i tF r e e F o r m F e a t u r e编辑自由特征E d i t I D S y m b o l编辑I D符号E d i t L i n k e d R e g i o n编辑链接区域E d i t M a r g i n编辑坐标尺寸定位边缘E d i t o b j e c t p r e f e r e n c e s编辑对象预设置E d i t O b j e c t S e g m e n t s编辑对象段E d i t O r d i n a t e(S e t)O r i g i n编辑坐标尺寸原点E d i t O r d i n a t e D i m D o g l e g s编辑坐标尺寸拐线E d i t O r d i n a t e D i m e n s i o n编辑坐标尺寸E d i t P o s i t i o n i n g编辑位置E d i t S c a l e编辑比例E d i t S e a r c hF i l t e r编辑搜索过滤器E d i t S e c t i o n L i n e编辑剖切线E d i t S h e e t B o u n d a r y编辑片体边界E d i t S k e t c h D i m e n s i o n编辑草图尺寸E d i t S o l i d D e n s i t y编辑实体密度E d i t S p l i n e b y A d d i n g a P o i n t通过添加点来编辑样条E d i t S t r u c t u r e编辑结构E d i t V D e g r e e编辑V向阶次E d i t V i e w D i s p l a y P r e f e r e n c e s编辑视图显示预设置E d i t i n g,M o v i n g P o l e s编辑，移动极点E d i t i n g D i m e n s i o n T e x t编辑尺寸文本E d i t i n g D r a f t i n g O b j e c t s编辑草图对象E d i t i n g G D&T S y m b o l s编辑形位公差符号E d i t i n g I D S y m b o l s编辑I D符号E d i t i n g O r d i n a t e D i m e n s i o n s编辑坐标尺寸E d i t i n g T e x t编辑文本E d i t i n g t h e D i s p l a y o f D r a w i n g V i e w s编辑图纸视图的显示 E d i t i n g t h e S e c t i o n L i n e S e g m e n t s编辑剖面线段E d i t i n g U t i l i t y S y m b o l s编辑实用符号E l e m e n t S i z e元素尺寸E l l i p s e椭圆E m p h a s i z e W o r k P a r t强调工作部件E m p t y L i s t空的列表E m p t y R e f e r e n c e s e t空的引用集E n d C u r v a t u r e s端点曲率E n d P o i n t终点E n d S l o p e s端点斜率E n d T a n g e n t O v e r f l o w溢流至切线结束E n d s-a p e x-r h o端点－顶点－R H OE n d s-a p e x-s h o u l d e r端点－顶点－肩点E n d s-s l o p e-c u b i c端点－斜率－三次曲线E n d s-s l o p e s-h i l i t e端点－斜率－高亮E n d s-s l o p e s-r h o端点－斜率－R H OE n d s-s l o p e s-s h o u l d e r端点－斜率－肩点E n g i n e e r i n gF e e t/I n c h e s工程英尺/英寸E n t e r R a d i u s键入半径E n t e r i n g d i m e n s i o n e d i t m o d e进入尺寸编辑模式E n t i r e P a r t整个部件E n t i r e P a r t C o n d i t i o n整个部件条件E n t i t y O r i g i n实体原点E n t r i e s O p t i o n s记录选项E n v i r o n m e n t V a r i a b l e环境变量E q u a l A r c L e n g t h S e g m e n t s等弧长分段E q u a l A r c l e n g t h等弧长E q u a l L e n g t h等长度E q u a l R a d i u s等半径E r a s e O b j e c t s擦除对象E r r o r M e s s a g e s错误信息E v a l u a t i n g C o n c e p t s评估概念E x i s t i n g L i n e存在线E x i s t i n g P a r t存在的部件E x i s t i n g P o i n t存在点。

S7-200-PLC编程及应用(廖常初第2版)习题参考答案

第3章习题答案1.填空1）输出指令（对应于梯形图中的线圈）不能用于过程映像输入寄存器。

2） SM 0.1在首次扫描时为0N.SMO.O —直为ON °3）毎一位BCD码用4—位二进制数来表示.其取值范帀为二进制数2#0000_~2札1 001 一4）二进制数2#0 1 00 0 001 1000 0101对应的十六进制数是_」6#4 183_，对应的十进制数是」6 773—,绝对值与它相同的负数的补码是2#」0 1 1 1110 0 111 101L。

5）BCD 码 2 #010 0 00 0 1 1 0 00 0 10 1 对应的十进制数是_4 1 85_。

6）接通延时定时器TON的使能（IN）输入电路接通时开始定时,当前值大于等于预设值时其是时器位变为ON.梯形图中其常开触点接通，常闭触点断开°7）接通延时定时器TON的使能输入电路断开时被复位.复位后梯形图中其常开触点断开•常闭触点接通.当前值等于Q。

8〉有记忆接通延时定时器TONR的使能输入电路接通时开始左时,使能输入电路断开时，当前值保持不变°使能输入电路再次接通时继续宦时°必须用复位指令来复位TONR。

9）断开延时迫时器TOF的使能输入电路接通时.泄时器位立即变为ON .当前值被淸愛。

便能输入电路断开时，当前值从0开始增大°当前值等于预设值时，输出位变为OFF, 梯形图中其常开触点断开,常闭触点接通,当前值保持不变°10）若加计数器的计数输入电路CU由断开变为接通、复位输入电路R断开，il•数器的当前值加1。

当前值大于等于预设值PV时•梯形图中其常开触点接通.常闭触点断开。

复位输入电路接通时,计数器被复位，复位后其常开触点断开，常闭触点接通，当前值为卫_。

*3. -914 I6tt•5.无符号数。

6.VB20 和VB2 1 ,V B2 0*7 .VW20 和VW22,VB20~VB2 3 , VW 2 2,VB20爲.十进制小数。

华为光模块属性

交换机常用模块：
倚窗远眺，目光目光尽处必有一座山，那影影绰绰的黛绿色的影，是春天的颜色。

周遭流岚升腾，没露出那真实的面孔。

面对那流转的薄雾，我会幻想，那里有一个世外桃源。

在天阶夜色凉如水的夏夜，我会静静地，静静地，等待一场流星雨的来临…
许下一个愿望，不乞求去实现，至少，曾经，有那么一刻，我那还未枯萎的，青春的，诗意的心，在我最美的年华里，同星空做了一次灵魂的交流…
秋日里，阳光并不刺眼，天空是一碧如洗的蓝，点缀着飘逸的流云。

偶尔，一片飞舞的落叶，会飘到我的窗前。

斑驳的印迹里，携刻着深秋的颜色。

在一个落雪的晨，这纷纷扬扬的雪，飘落着一如千年前的洁白。

窗外，是未被污染的银白色世界。

我会去迎接，这人间的圣洁。

在这流转的岁月里，有着流转的四季，还有一颗流转的心，亘古不变的心。

TD-SCDMA_缩略语表

缩略语Acronym/A bbreviatio n 英文词汇English term中文词汇Chinese term3GPP3rd Generation PartnershipProject第三代合作组织AAL2ATM Adaptation Layer 2ATM 适配层 2AAL5ATM Adaptation Layer 5ATM 适配层 5ABC Activity-based Costing基于活动的成本核算AC Alternating Current交流电ADM Add/Drop Multiplexer分插复用器AEUa RNC32-port ATM over E1/T1/J1interface Unit REV:aRNC 32路ATM over E1/T1/J1接口板AIS Alarm Indication Signal告警指示信号ALCAP Access Link Control ApplicationProtocol接入链路控制应用协议ATM Asynchronous Transfer Mode异步传输模式AWGN Additive White Gaussian Noise加性高斯白噪声ALCAP Access Link Control ApplicationPart接入链路控制应用部分ALM Alarm Board基于带宽的单元告警板ANI Automatic Number Identification自动号码识别AOUa RNC2-port ATM over channelizedOptical STM-1/OC-3Interface UnitREV:aRNC 2路ATM over 通道化STM-1/OC3接口板ARP Address Resolution Protocol地址解析协议AS Access Server接入服务器ASCII American Standard Code forInformation Interchange美国信息交换标准码ASE Application Service Element应用业务单元/应用业务要素ASIC Application Specific IntegratedCircuit专用集成电路ASP STM-64Administrative SignalProcessing UnitSTM-64管理单元信号处理板ATM Asynchronous Transfer Mode异步转移模式、异步传输模式ATT Automatic Trunk Testing自动中继检测BACS Bankers Automated ClearingSystem银行家自动结帐系统BAM Back Administration Module后台管理模块BBU Base Band Unit基带处理单元BCCH Broadcast channel(logicalchannel)广播信道（逻辑信道）BCHAMR Broadcast ChannelAdaptive Multi-Rate广播信道自适应多速率BER Basic Encoding Rules基本编码规则BER Bit Error Rate误码率BFD Bidirectional Forwarding Detection双向转发检测BHCA Busy Hour Call Attempt忙时试呼BIOS Basic Input/Output System基本输入/输出系统BITS Building Integrated Timing Supplysystem通信楼综合定时供给系统BKP backplane,("motherboard"incomputer)背板，母板BMC Broadcast/Multicast Controlprotocol 广播/多播控制协议A BBNCBackbone Network Connection 骨干网连接BOBusiness Owner 业务主管BOOTPBootstrap Protocol 引导协议,自举协议BSCBase Station Controller 基站控制器BTBritish Telecommunications,British Telecom, BT Group 英国电信CARRIERCARRIER 载波CBRConstant Bit Rate 恒定比特率，固定比特率CCCall Control 呼叫控制CCCCredit Card Calling 信用卡呼叫CCCHCommon Control Channel 公共控制信道CCPCommunication Control Port 通信控制端口CCTrCHCoded Composite Transport Channel 编码复合传输信道CDECommon Desktop Environment 通用桌面环境CDRCall Detail Record 详细话单、话单CDVTCell Delay Variation Tolerance 信元时延抖动容限CDMACode Division Multiple Access 码分多址CELLCELL 小区CIDCall Instance Data 呼叫实例数据CLKCLK Card 时钟板CLRCell Loss Rate 信元损失率CMCall Management 呼叫管理CMConfiguration Management 配置管理CME TDRAN CM Express TDRAN 配置管理专用工具。

LC-1250B2Q2中文资料

LC-1250xxxxRx SeriesRoHS Compliant 2x5 Small Form Factor Transceiver for GigabitEthernetFEATURESCompliant with SFF transceiver MSA specification Compliant with specifications for IEEE 802.3z/Gigabit Ethernet LC-1250BxQxRx compliant with the1.0625GBd Fiber Channel 100-SM-LC-L FC-PI Rev.13 LC-1250AxFxRx compliant with the1.0625GBd Fiber Channel FC-PI 100-M5-SN-I Rev.13 Single + 3.3V power supplyLaser Class 1 product which comply with the requirements of IEC 60825-1 and IEC 60825-2 Duplex LC connector interface TTL or PECL signal detect levelRoHS Compliant per Directive 2002/95/ECDescription The LC-1250xxxxRx series are high performance,cost effective optical transceivers intended for1250 Mb/s. They are designed to provide Gigabit Ethernet compliant link at 1250 Mb/s forshort, intermediate and long reach links, respectively. The LC-1250xxxxRx series provide with the LCreceptacle those are compatible with the industry standard LC connector.The LC-1250xxxxRx series are Class 1 eyesafety product. The optical power levels, under normal operation, are at eye safe level.ApplicationsSwitch to switch interfaceSwitched backplane applications File server interface Performance LC-1250AxFxRx: 850nm VCSEL, up to 500m in 50/125 m MMF850nm VCSEL, up to 220m in 62.5/125 m MMF LC-1250BxQxRx:1310nm FP laser, up to 10km in 9/125 m SMF 1310nm FP laser, up to 550m in 50/125 m MMF 1310nm FP laser, up to 550m in 62.5/125 m MMFLC-1250xxxxRx SeriesAbsolute Maximum RatingsParameter Symbol Min.Typ.Max.UnitNote Storage Temperature Ts -40 85 ºCLead Soldering Temperature T SOLD260 ºCLead Soldering Time t SOLD10 Sec.Supply Voltage V CC 0 5 VRecommended Operating ConditionsParameter Symbol Min.Typ.Max.UnitNote Ambient Operating Temperature T A 0 70 ºC 1Supply Voltage V CC 3.135 3.465VNote: See ordering information for detailElectrical Characteristics(V CC=3.135 V to 3.465 V)Parameter SymbolMin.Typ.Max.UnitNote TransmitterTransmitter Data Input Voltage-Low V IL-V CC -1.81 -1.48 VTransmitter Data Input Voltage-High V IH-V CC -1.16 -0.88 VTransmitter Disable Input-High V DISH 2 V CC+0.3 VTransmitter Disable Input-Low V DISL 0 0.8V ReceiverData Output Voltage-Low V OL-V CC -1.95 -1.62 VData Output Voltage-High V OH-V CC -1.045 -0.74 VSD Output Voltage-Low V SDH-V CC -1.95 -1.62 V SD Output Voltage-High V SDL-V CC -1.05 -0.74 V ECLFamily SD Output Voltage-Low V SDH-V CC0.8 VSD Output Voltage-High V SDL-V CC 2 VLVTTLLC-1250xxxxRx Series Transmitter Optical Performance Specifications:(V CC=3.135 V to 3.465 V)Parameter Symbol Min. Typ. Max. Unit Notes Supply Current Icc 150 mAAverage Launched PowerLC-1250AxFxRx LC-1250BxQxRx P O-9.5-9.5-4-3dBmOptical extinction ratio ER 9 dB Center wavelengthLC-1250AxFxRx LC-1250BxQxRx 83012748601355nmSpectral WidthLC-1250AxFxRx (RMS) LC-1250BxQxRx (RMS) σ0.852.8nmRelative Intensity Noise RIN -116 dB/Hz Optical Rise/Fall Time tr/t f260 ps 1Output Eye Complies with the IEEE 802.3z/D2 specification, and is class 1laser eye safetyReceiver Optical Performance Specifications:(V CC=3.135 V to 3.465 V)Parameter Symbol Min. Typ. Max.Unit Notes Supply Current Icc 120 mAOptical input sensitivity (avg.)LC-1250AxFxRx LC-1250BxQxRx P IN-17-19dBm 2Optical input saturation (avg.)LC-1250AxFxRx LC-1250BxQxRx P SAT-3-3dBmOptical WavelengthLC-1250AxFxRx LC-1250BxQxRx 83012748601355nmOutput Data risetime t r0.35ns1 Output Data falltime t f0.35ns1 SD-Asserted Level (Avg.)LC-1250AxFxRx LC-1250BxQxRx P A-17-19dBmSD-Deasserted Level (Avg.)LC-1250AxFxRx LC-1250BxQxRx P D-30-30dBmSignal detect- Hysteresis P A -P D 0.5 dB Notes:1. These are unfiltered 20%~80% values.2. The sensitivity is provided at a BER of 1×10-10 or better with an input signal consisting of 1250 Mb/s,LC-1250xxxxRx Series27-1 PRBS and ER=9dB.Mask of the eye diagram for the optical transmit signalPin Out Table:PIN (2X5) Symbol Functional description1 GND Receiver Signal Ground2 RXV CC Receiver Power Supply3 SD Signal Detect4RD ( ) Receiver Data Out Bar (LVPECL) 5 RD (+) Receiver Data Out (LVPECL) 6 TXV CC Transmitter Power Supply 7 GND Transmitter Signal Ground 8 Disable Transmitter Disable (LVTTL) 9 TD (+) Transmitter Data In (LVPECL) 10 TD (-) Transmitter Data In Bar (LVPECL)LC-1250xxxxRx SeriesLC-1250xxxxRx SeriesLC-1250xxxxRx SeriesPackage Outline Drawing (Plastic Housing)MADE IN CHINALC-1250xxxxRx SeriesRegulatory ComplianceFeature Reference PerformanceElectromagnetic Interference (EMI)FCC Class BEN 55022 Class B (CISPR 22A)Radio Frequency Electromagnetic Field EN 61000-4-3 IEC 1000-4-3Electrostatic Discharge to the Duplex LC Receptacle EN 61000-4-2 IEC 1000-4-2 IEC 801.2Electrostatic Discharge to the Electrical Pins MIL-STD-883E Method 3015.7(1) Satisfied with electricalcharacteristics of productspec.(2) No physical damageEye Safety US FDA CDRH AEL Class 1EN 60950: 2000EN 60825-1: 1994+A11+A2EN 60825-2: 2000 CDRH File # 0321539-00TUV Certificate No. R50032471Component Recognition Underwriters Laboratories andCanadian Standards Association JointComponent Recognition for InformationTechnology Equipment IncludingElectrical Business EquipmentUL File # E239394LC-1250xxxxRx SeriesOrdering informationLC-1250X 1X 2X 3X 4X 5X 6X 1: Light source types:A: 850nm Multi-mode B: 1310nm Single-mode X 4:Pin-out / logic interface:1 = 2X5 / DC-coupled2 = 2X5 / AC-coupledX 2:X 3:Power Supply Voltage2: 3.3V / PECL SD Level 4: 3.3V / TTL SD LevelDistance:F: 500m, 50/125 m MMF Q: 10km, 9/125 m SMFX 5:X 6:Blank : Non-RoHS Compliant R : RoHS CompliantTemperatureBlank : 0 to +70 degree C H : -10 to +85 degree C T : -40 to +85 degree C。

上海人民科陆柳川正泰三相四线多费率电子式电度表中文使用说明书(三相7P导轨表)

XTM1250SF型电子式多费率电能表使用说明书1、概述XTM1250SF型三相电子式多费率电能表系我公司采用微电子技术计量电能；采用进口专用大规模集成电路与最新单片处理器及其外围芯片技术设计；由先进的单片机处理系统进行数据的采集、处理和保存；电能数据显示采用7位宽温度型液晶显示；应用SMT工艺等先进技术研制开发的具有复费率（分时）电能计量，红外载波通讯及RS485接口串行通讯抄表/设表等多种功能为一体的智能化全电子式电能表。

该电能表完全符合部标DL/T645-1997和国标GB/T17215-1998中1或2级单相电能表的相关技术要求；具有可靠性好、体积小、重量轻、外表美观、工艺先进、35mmDIN标准导轨方式安装等特点；并具有良好的抗电磁干扰、低自耗节电、高精度、高过载、高稳定性、防窃电、长寿命。

2、性能与原理2.1电能表的线路设计与元器件的选择以较大的环境允差为依据，因此可保证整机长期工作稳定。

2.2当电源断电后锂电池作为后备电源。

可以保证电能表断电计时精确，来电后自动投入运行。

在电能表前端设有光电耦合脉冲输出接口以及RS485串行数据通讯接口，以便于进行精度测试和数据通讯。

2.3可通过掌上电脑或PC机对电能表预置数据、时段编程、校正时钟、抄表等操作。

2.4原理：电能表由分压器取得电压采样信号，电流互感器取得电流采样信号，经乘法器得到电压电流乘积信号，再经频率变换产生一个频率与电压电流乘积成正比的电能计量脉冲，生成的电量脉冲信号经光电耦合器送到CPU处理，运算后存储于非易失的EEPROM中，并提供显示。

3、适应范围XTM1250SF型电子式多功能电能表适用于计量额定频率为50Hz或60Hz的单相交流有功电能。

供固定安装在室内使用，适用于环境温度不超过-20～+55℃，相对湿度不超过85%，且空气中不含有腐蚀性气体及避免尘砂、霉菌、盐雾、凝露、昆虫等影响。

4、主要规格及技术参数4.1电能表规格：型号准确度额定电压Ub额定电流（A）XTM1250SF型1级220V/3801.5(6), ,5(20),15(90)5(30),10(40) 10(60),20(100) 2级注：额定电流栏中，括号前的数值为标定电流值Ib，括号内的数值为额定最大电流值Imax。

2008牧马人维修资料小手册

牧马人维修技术资料小手册2008年1月目录1. 车辆识别号码 (2)2. 发动机舱国际符号说明 (3)3. 液体、润滑油技术参数 (4)4. 保险丝/集成式电源模块 (8)5. 发动机故障码表 (14)6. 3.8L发动机正时安装与确认 (25)7. 自动变速器42RLE预诊断故障排除程序 (28)8. 自动变速器-42RLE压力测试 (30)9. 自动变速器-42RLE-电气诊断 (36)10. OBD II监测执行过程 (40)11. CAN总线电压表 (44)12. 车轮定位参数与调整 (45)13. ABS的验证测试 (48)14. 空调性能测试 (51)15. 遥控免钥匙登车系统 (57)16. SENTRY KEY 转发器编程 (61)17. Sentry Key 遥控进入模块（SKREEM/SKIM）验证 (64)18. SKIS 初始化 (66)19. 车辆防盗安全系统 (67)20. 手动校准罗盘方法 (70)21. 动力转向系统放气 (72)22. 牧马人常用英文缩写 (74)1.车辆识别号码车辆识别号码说明车辆识别号（VIN）牌位于左A立柱附近的下风挡玻璃栅栏上。

VIN包含提供关于车辆的数据的17个字符。

车辆识别号也印在：●车辆安全证明标识。

●横梁。

为保护消费者免遭盗窃，也避免受欺骗，制造商必须将车辆识别号码的第9 位数设为“检查数字”。

由制造商与政府机构使用该检查数字来验证车辆与官方文件的真实性。

检查数字的使用公式并不向公众发布。

车辆识别号码解码图2.发动机舱国际符号说明Daimler Chrysler公司使用国际符号来标识发动机舱润滑剂和液体检查及加注位置。

3.液体、润滑油技术参数发动机底盘车桥容量4.保险丝/集成式电源模块完全集成式动力模块（TIPM）位于蓄电池附近发动机舱内。

这个中心包含盒装保险丝，微型保险丝和继电器。

确认每个零件的标签印在盖的里面。

续电器小心:●当安装集成式电源模块盖时，重要的是确保盖正确定位并完全锁止。

S7-200温度控制

硬件配置和软件环境3.1实验配置3.1.1 西门子S7-200S7-200系列PLC可提供4种不同的基本单元和6种型号的扩展单元。

其系统构成包括基本单元、扩展单元、编程器、存储卡、写入器、文本显示器等。

本论文采用的是CUP224。

它具有24个输入点和16个输出点。

S7-200系列的基本单元如表3-1所示[13]。

表3-1 S7-200系列PLC中CPU22X的基本单元3.1.2 传感器热电偶是一种感温元件，它直接测量温度，并把温度信号转换成热电动势信号。

常用热电偶可分为标准热电偶和非标准热电偶两大类。

所调用标准热电偶是指国家标准规定了其热电势与温度的关系、允许误差、并有统一的标准分度表的热电偶，它有与其配套的显示仪表可供选用。

非标准化热电偶在使用范围或数量级上均不及标准化热电偶，一般也没有统一的分度表，主要用于某些特殊场合的测量。

标准化热电偶我国从1988年1月1日起，热电偶和热电阻全部按IEC国际标准生产，并指定S、B、E、K、R、J、T七种标准化热电偶为我国统一设计型热电偶。

本论文才用的是K型热电阻[14]。

3.1.3 EM 231模拟量输入模块传感器检测到温度转换成0～41mv的电压信号，系统需要配置模拟量输入模块把电压信号转换成数字信号再送入PLC中进行处理。

在这里，我们选用了西门子EM231 4TC模拟量输入模块。

EM231热电偶模块提供一个方便的，隔离的接口，用于七种热电偶类型：J、K、E、N、S、T和R型，它也允许连接微小的模拟量信号(±80mV范围)，所有连到模块上的热电偶必须是相同类型，且最好使用带屏蔽的热电偶传感器。

EM231模块需要用户通过DIP开关进行选择的有：热电偶的类型、断线检查、测量单位、冷端补偿和开路故障方向，用户可以很方便地通过位于模块下部的组态DIP开关进行以上选择，如图3-2所示。

本设计采用的是K型热电偶，结合其他的需要，我们设置DIP开关为00100000。

海斯特电力抵抗卡车J1.50-3.00EX 2技术参数说明书

1500-3000 KGELECTRIC COUNTERBALANCED TRUCKDROP BATTERY BOX (DBB)Enhanced drivingstability by placing the battery in the lower and rear part of the truck.OPERATOR COMFORTLarge cab with high head clearance and legroom for operator comfort.LATERAL STABILITYThe new stability system reduces truck sway during turns.WIDE TREAD/LOW PROFILE TYRESEnhanced circling stability.CARRIAGE LIGHT*Direct light on load and racks illuminates the work area when picking stock at different heights.TRAVEL & LOADHANDLING INTERLOCKOperator presence isdetected by a seat sensor. Operations are locked (disabled) when the operator leaves the seat.Hyster Company is a part of the NACCO Materials Handling Group, a global leader in the industry with manufacturing and technology centres in 12 locations around the world producing quality components and assembling complete trucks for markets such as the fast growing Asia-Pacific.The Hyster ® J1.50-3.00EX 2 ElectricCounterbalanced Truck has the following benefits:n L oad handling speed and performance ranked as top of its kind in the industry n Excellent visibility with a redesigned mast n L ong wheelbase, low profile tyres and a heavy battery set (DBB) increase machine stability n S hort turning radius to improve access and manoeuvrability in tight spaces n E rgonomic features for operator comfort n A ftermarket service and supportHyster products are distributed and supported through an extensive network of exclusive dealers who provide local coverage through their sales and service locations across Asia and Pacific regions. Distribution partners were selected on the strength of theircustomer support capability and outstanding service ethic to bring quality products, sales consultancy and aftermarket services to customers in their local markets.ABOUT HYSTER ®J1.50-3.00EX 2 - FEATURES*Optional feature.IMPROVED VISIBILITY THROUGH THE MASTInner mast has been widened to create an open view.POSITIONING LASER*Laser positioning assists in the correct placement of the forks into the pallet.LOAD WEIGHT METERDisplays the weight of the load when the machine is stationary.C H A R A C T E R I S T I C SMANUFACTURER HYSTER Chassis Standard chassisModel J1.50EX 2J1.75EX 2J2.00EX 2J2.50EX 2J3.00EX 2P E R F O R M A N C ECapacity kg 15001750200025003000Load center mm 500500500500500Lift height mm A 30003000300030003000Standard free liftmmB 145145155155160Tilt of mast (Forward/backward)degree C/D6/106/106/106/106/10Travel speed Unladen km/h 15.015.015.015.018.0(Standard tread)Laden km/h 13.513.513.012.517.0Lifting speedUnladen mm/s 635635600600550Ladenmm/s 450420355340400Minimum turning radius mm E 17951825193019602145Equal aisle width mm 18901940208521152265D I M E N S I O N SOverall length With forksmm F 30003035319533953560Overall width mm G 11001130126512651265HeightCanopy guard mm J 20902090209020902090Extended mast mm I 41054105412041204125Collapsed mastmm H 19951995199519952060Fork length mmK 92092092010701070Fork spread Max. - Min.mm L 920 - 200920 - 2001020 - 2501020 - 2501060-250Wheelbase mmM 13801380148514851625TreadFront/Rear mm N/O 910/905950/9051040/10151040/10151040/1015Ground clearance Mastmm P 110110*********Unladen weightw/ standard battery kg 29453240370041954710w/o batterykg22902585297032503520T Y R ETyre size Front 6.00-9-10PR(I)21x8-9-10PR(I)23x9-10-16PR(I)23x9-10-16PR(I)23x9-10-20PR(I)Rear5.00-8-8PR(I) 5.00-8-10PR(I)18x7-8-10PR(I)18x7-8-10PR(I)18x7-8-14PR(I)E L E C T R I C A L C O M P O N E N T SControl type Drive FET Inverter FET Inverter FET Inverter FET Inverter FET Inverter Hoist FET Inverter FET Inverter FET Inverter FET Inverter FET Inverter SteeringIGBT Chopper IGBT Chopper IGBT Chopper IGBT Chopper IGBT Chopper Drive motor Type AC InductionAC InductionAC InductionAC InductionAC InductionRated outputkw6.5 6.58.78.711.7Hoist motor Type AC InductionAC InductionAC InductionAC InductionAC InductionRated outputkw9.69.69.69.616.2Power steer motor Type DC PermanentMagnetDC PermanentMagnetDC PermanentMagnetDC PermanentMagnetDC PermanentMagnetRated outputkw 0.90.90.90.91.2Battery compartment W x L x H mm465 x 980 x 780465 x 980 x 780570 x 1028 x 780570 x 1028 x 780710 x 1028 x 780Battery capacityMinimum Volt x Ah/hr 48 x 390/548 x 390/548 x 440/548 x 565/572 x 440/5MaximumVolt x Ah/hr48 x 525/548 x 525/548 x 700/548 x 700/572 x 600/5Battery charger (Optional)Transformer Type Transformer Type Transformer Type Transformer TypeTransistor Type Input voltage 3 phase, 200-230v 3 phase, 200-230v 3 phase, 200-230v 3 phase, 200-230v 3 phase, 200-230v Power source (kVA)Standard batterykVA 5.9 5.98.38.39.8D U A L T Y R EOverall widthmm--145514551455TreadFront mm --129512951295Unladen weight w/o battery kg--297532503545Tyre sizeFront-- 5.50-15-8PR(I)5.50-15-8PR(I)5.50-15-8PR(I)J1.50-3.00EX 2 - SPECIFICATIONSJ1.50-3.00EX 2 - SPECIFICATIONSSTANDARD SPECIFICATIONS OF 48 VOLTS & 72 VOLTSINTERSECTING (IA) AND RIGHT-ANGLE STACKING (SA) AISLE WIDTHS (UNIT MM)*Model100011001200130014001500IA SA IA SA IA SA IA SA IA SA IA SA J1.50EX 28001845320518453305188034051970350520553605215037051000184532051845330519303405201535052105360521903705110018603205189033051975340520553505214536052230370512001910321019703310205034102135351022203610230537101300197032152050331521303410221035102295361023803710140020503220213033202210342022903515237036152455371515002135323022103325229034252370352524503625253537201800238532602460336025353455261035502690365027703745J1.75EX 28001940323519403335194034352005353520903635218537351000194032351940333519653435205035352140363522253735110019403235194033351995343520753535216536352250373512001970324019703340205034402135354022203640230537401300202032452050334521303440221035402295364023803740140020703250213033502210345022903545237036452455374515002135326022103355229034552370355524503655253537501800238532902460339025353485261035802690368027703775J2.00EX 28002085339520853495208535952085369521703795226038951000208533952085349520853595213036952215379523053895110020853395208534952085359521553695224037952330389512002085339520853495209535952180369522653795235038951300212534002125350021653600224537002330380024153900140021753405217535052245360523253705241038052495390015002225341522453510232536102405371024853810257039101800242034452495354025703640264537352725383528053930J2.50EX 28002115342021153520211536202115372021703820226039201000211534202115352021153620213037202215382023053920110021153420211535202115362021553720224038202330392012002115342521153525211536252180372522653825235039251300215534302155353021653630224537252330382524153925140022053435220535352245363023253730241038302495393015002255344022553540232536402405374024853835257039351800242034702495357025703665264537652725386028053960J3.00EX 28002265363522653735226538352265393522654035226541351000226536352265373522653835226539352265403523104135110022653635226537352265383522653935226540352330413512002265363522653735226538352265393522704035235541351300230536352305373523053835230539352335403524204135140023553640235537402355384023553940241540402500414015002405364524053745240538452410394524904045257541451800255536752555377025753870265039652730406528104165* F igure does not include the turning capacity of 200mm in the practical right-angle stacking aisle width.MINIMUM RIGHT-ANGLE AISLE WIDTH RIGHT-ANGLE STACKING AISLE WIDTHPallet Length Pallet WidthJ1.50-3.00EX 2 - SPECIFICATIONS J1.50-3.00EX 2 - STANDARD FEATURES & OPTIONSDIMENSION CHART LOAD CAPACITY CHARTS STANDARD FEATURESTravel/Hoist Relatedn Travel/Hoist AC motorn Power steeringn Soft landingCockpitn Small diameter steering wheeln Manifest clipDisplayn LCD displayTravel/Hoist Relatedn Travel and load handling interlockn Neutral startOthern Back buzzern Ramp startLamp relatedn Headlightsn Turning indicatorsTravel/Hoist Relatedn Accelerator pedal/driving power controln High-visibility wide mastBatteryn Auto power offn Neutral brake shift lever regenerationn BDI interrupt (stop hoisting over-discharging)OPTIONAL FEATURESTravel/Hoist Relatedn Left hand shift leverCockpitn Suspension seatn Seat heatern Front windshieldn Canvas cabinn Acrylic coverDisplayn Full function display (full-dot LCD)Travel/Hoist Relatedn Forward/back movement chimern Forward/back melodic chimern Horn switchn Parking brake warningn Solid tyresn Long forkn High backrestOthern Large size rear view mirrorn Large size room mirrorLamp relatedn LED headlight (round type/square type/automaticilluminance control type)n LED rear combination lightn LED rotating lightn LED work/room lightn Carriage lightn Positioning laserTravel/Hoist Relatedn Simple load weight scaleBatteryn Spare batteryEnvironmental Specsn General freezer refrigerator spec. model(Up to -35°C/-45°C)n Anti-rust spec. modelMASTModel1.5 - 1.75ton2.0 - 2.5ton3.0ton J1.50EX 2 - J1.75EX 2J2.00EX 2 - J2.50EX 2J3.00EX 2Mast Type MFHmmOverallLoweredHeightmmOverallExtendedHeight**mmFreeLift*mmBackTiltDegMFHmmOverallLoweredHeightmmOverallExtendedHeight**mmFreeLift*mmBackTiltDegMFHmmOverallLoweredHeightmmOverallExtendedHeight**mmFreeLift*mmBackTiltDegSimplex (2-StageLimited Free Lift)Standard301019953955145103030199539701551030352060412516010 Optional331021454255145103330217042701551033352210442516010 Optional351022454455145103530227044701551035352310462516010 Optional371023454655145103730242046701551037352440482516010 Optional40102595495514564030262049701551040352640512516010 Optional431027455255145643302770527015564335279054251606 Optional451028455455145645302870547015564535289056251606 Optional501030955955145650303120597015565035314061251606Full-free (2-StageFull Free Lift)Optional300019953950107510298019953920107510306021404150107010 Optional330021454250122510337022704310135010336022904450122010 Optional350022454450132510357023704510145010356023904650132010 Optional370023454650142510382025204760160010381025404900147010 Optional410025955050167564170272051101800641602740525016706Triplex (3-StageFull Free Lift)Optional4000189549459756412019705060105064110199052009206 Optional43501995529510756433020405270112064320206054109906 Optional450020455445112564570212055101200645602140565010706 Optional480021455745122565020227059601350650102390610013206 Optional510022456045132565320237062601450653102540640014706 Optional540023456345142565520247064601550657102740680016706 Optional600025956945167566020272069601800660102890710018206* With standard load backrest 1070mm ** Unladen with standard LBRContact your nearest Hyster Dealershipby visiting Contact your local Hyster Dealer/HysterasiapacificHYSTER ®DEALERSis a Registered Trademark.。

ABB低压直流控制产品断路器接触器隔离开关等

3极
4极
S800 PV-S IEC60947-2
1500
8
600 - 800 (2极) 100 (3极)
3极
1200 (4极)
4极
S800 PV-M IEC60947-3
1500
8
800 (2极)
32 / 64 / 125 Icw=1.5
2极
1200 (3极)
典型应用行业
直流产品被广泛地应用在光伏发电、电力牵引、关键电源以及港口等低压领域。ABB 全系列的直流断路器、隔离开关和熔断器以及监测和控制产品，凭借其优越的性能，为直流配电系统提供高品质的保证。
光伏设备
随着太阳能行业的迅猛发展，大型装机容量的太阳能发电厂不断增加，大型光伏电厂对所需的控制和保护设备的性能要求也越来越高。当光伏电厂的功率超过某一水平时，需要采用断路器或隔离开关。特别是逆变器的保护隔离，对低压元器件提出了更高的要求。 ABB Emax DC 直流专用空气断路器、Tmax塑壳断路器及其隔离开关系列，其优越的性能得到全球逆变器制造商的认可，并作为他们配电的首要选择。全新的1000V DC OT系列隔离开关是针对太阳能光伏系统中的直流分断问题而专门设计的。在直流1000V DC时，该系列隔离开关具有出色的分断能力。 ABB 光伏专用系列产品还包括S800 PV系列，它又可分为高性能微型断路器S800 PV - S 和隔离开关S800PV-M两个系列，其额定电压最高可达1200VDC。考虑到光伏发电对高直流电压的实际应用需求，S800PV系列产品以其高电压、防逆流、与极性无关的保护特性和紧凑体积等特点，为客户提供了完美的光伏组件和直流汇流解决方案。
额定电流 (A)
额定短时耐受短路电流 lcw (kA)

7WBD3306AMUTCG;7WBD3306USG;7WBD3306DTR2G;7WBD3306AMX1TCG;7WBD3306BMX1TCG;中文规格书,Datasheet资料

7WBD33062-Bit Translating Bus SwitchThe 7WBD3306 is an advanced high−speed low−power 2−bit translating bus switch in ultra−small footprints.Features•High Speed: t PD= 0.25 ns (Max) @ V CC = 4.5 V•3 W Switch Connection Between 2 Ports•Power Down Protection Provided on Inputs•Zero Bounce•TTL−Compatible Control Inputs•Ultra−Small Pb−Free Packages•These are Pb−Free DevicesThis document contains information on some products that are still under development. ON Semiconductor reserves the right to change or discontinue these products without notice.See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet.ORDERING INFORMATIONMARKINGDIAGRAMSULLGA81.45 x 1.0CASE 613AAULLGA81.6 x 1.0CASE 613ABULLGA81.95 x 1.0CASE 613AC5MGAPMGAPMGUDFN8MU SUFFIXCASE 517AJAHMGAH M*GG1UQFN8MU SUFFIXCASE 523ANUS8US SUFFIXCASE 493(Note: Microdot may be in either location)*Date Code orientation may vary dependingupon manufacturing location.Micro8]DM SUFFIXCASE 846AA= Assembly LocationY= YearW= Work WeekM= Date CodeG= Pb−Free PackageTSSOP8DT SUFFIXCASE 948ALAAEYWWAG18OE11V CC A1GND 2387645B1OE2B2A2Figure 1. ULLGA8/UDFN8(Top Thru −View)Figure 2. UQFN8(Top Thru −View)OE2B2A2A1B1V CCGNDFigure 3. US8/Micro8/TSSOP8(Top View)OE1A1GNDB1V CC OE2B2A2OE1Figure 4. Logic DiagramA1OE1B1A2OE2B2FUNCTION TABLEInput OEnFunction LBn = An HDisconnectMAXIMUM RATINGSSymbol Parameter Value Unit V CC DC Supply Voltage−0.5 to +7.0V V IN Control Pin Input Voltage−0.5 to +7.0V V I/O Switch Input / Output Voltage−0.5 to +7.0VI IK Control Pin DC Input Diode Current V IN < GND−50mAI OK Switch I/O Port DC Diode Current V I/O < GND−50mAI O ON−State Switch Current$128mAContinuous Current Through V CC or GND$150mAI CC DC Supply Current Per Supply Pin$150mAI GND DC Ground Current per Ground Pin$150mAT STG Storage Temperature Range−65 to +150°C T L Lead Temperature, 1 mm from Case for 10 Seconds260°C T J Junction Temperature Under Bias150°Cq JA Thermal Resistance US8 (Note 1)UDFN8UQFN8ULLGA8Micro8TSSOP8251111208455392150°C/WP D Power Dissipation in Still Air at 85°C US8UDFN8UQFN8ULLGA8Micro8TSSOP84981127601274319833mWMSL Moisture Sensitivity Level 1F R Flammability Rating Oxygen Index: 28 to 34UL 94 V−0 @ 0.125 inV ESD ESD Withstand Voltage Human Body Mode (Note 2)Machine Model (Note 3)Charged Device Model (Note 4)> 2000> 200N/AVI LATCHUP Latchup Performance Above V CC and Below GND at 125°C (Note 5)$200mA Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.1.Measured with minimum pad spacing on an FR4 board, using 10 mm−by−1 inch, 2 ounce copper trace no air flow.2.Tested to EIA / JESD22−A114−A.3.Tested to EIA / JESD22−A115−A.4.Tested to JESD22−C101−A.5.Tested to EIA / JESD78.RECOMMENDED OPERATING CONDITIONSSymbol Parameter Min Max Unit V CC Positive DC Supply Voltage 4.0 5.5V V IN Control Pin Input Voltage0 5.5V V I/O Switch Input / Output Voltage0 5.5V T A Operating Free−Air Temperature−55+125°CD t / D V Input Transition Rise or Fall Rate Control InputSwitch I/O 05DCnS/VDC ELECTRICAL CHARACTERISTICSSymbol Parameter Conditions V CC(V)T A = 255CT A =−555C to +1255CUnit Min Typ Max Min MaxV IK Clamp Diode Voltage I I/O = −18 mA 4.5−1.2−1.2VV IH High−Level Input Voltage(Control)4.0 to5.52.0 2.0VV IL Low−Level Input Voltage(Control)4.0 to5.50.80.8VV OH Output Voltage High See Figure 5I IN Input Leakage Current0 v V IN v 5.5 V 5.5±0.1±1.0m A I OFF Power Off Leakage Current V I/O = 0 to 5.5 V0±0.1±1.0m AI CC Quiescent Supply Current I O = 0,V IN = V CC or 0 VOE1 = OE2 = GNDOE1 = OE2 = V CC 5.5±1.0±0.1±1.0±1.0mAm AD I CC Increase in Supply Current(Control Pin)One input at 3.4 V;Other inputs at V CCor GND5.5 2.5mAR ON Switch ON Resistance V I/O = 0,I I/O = 64 mAI I/O = 30 mA 4.5337777WV I/O = 2.4,I I/O = 15 mA155050V I/O = 2.4, I I/O = 15 mA 4.0507070AC ELECTRICAL CHARACTERISTICSSymbol Parameter Test Condition V CC(V)T A = 25 5CT A =−555C to +1255CUnit Min Typ Max Min Maxt PD Propagation Delay, Bus to Bus See Figure 6 4.0 to5.50.250.25nst EN Output Enable Time See Figure 6 4.5 to5.50.8 2.5 4.20.8 4.2ns4.00.8 3.0 4.60.8 4.6t DIS Output Disable Time 4.5 to5.50.8 3.0 4.80.8 4.8ns4.00.8 2.9 4.40.8 4.4C IN Control Input Capacitance V IN = 5 or 0 V 5.0 2.5pF C IO(ON)Switch On Capacitance Switch ON 5.010pF C IO(OFF)Switch Off Capacitance Switch OFF 5.05pFTYPICAL DC CHARACTERISTICSFigure 5. Output Voltage High vs Supply VoltageV CC , SUPPLY VOLTAGE (V)V O H , H I G H L E V E L O U T P U T V O L T A G E (V )3.753.503.253.002.752.502.252.004.504.755.005.255.505.75V CC , SUPPLY VOLTAGE (V)V O H , H I G H L E V E L O U T P U T V O L T A G E (V )3.753.503.253.002.752.502.252.004.504.755.005.255.505.75V CC , SUPPLY VOLTAGE (V)V O H , H I G H L E V E L O U T P U T V O L T A G E (V )AC LOADING AND WAVEFORMS Parameter Measurement InformationCOpen*C L includes probes and jig capacitance.Test S1t PD Open t PLZ/t PZL7 V t PHZ/t PZH OpenVoltage Waveforms Propagation Delay TimesVoltage Waveforms Enable and Disable TimesOutputControltOLOHOutputOutputWaveform 1S1 at 7 V(Note 6)Waveform 2S1 at Open(Note 6)6.Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control7.All input pulses are supplied by generators having the following characteristics: PRR v 10 MHz, Z O = 50 W, t r v 2.5 ns, t f v 2.5 ns.8.The outputs are measured one at a time, with one transition per measurement.9.t PLZ and t PHZ are the same as t DIS.10.t PZL and t PZH are the same as t EN.11.t PHL and t PLH are the same as t PD.Figure 6. t PD, t EN, t DIS Loading and WaveformsInputOutputV OHV OL3 V0 VtORDERING INFORMATIONDevice Package Shipping†7WBD3306USG US8(Pb−Free)3000 / Tape & Reel7WBD3306MUTAG UDFN8(Pb−Free)3000 / Tape & Reel7WBD3306AMUTCG UQFN8(Pb−Free)3000 / Tape & Reel7WBD3306AMX1TCG ULLGA8 – 0.5 mm Pitch(Pb−Free)3000 / Tape & Reel7WBD3306BMX1TCG ULLGA8 – 0.4 mm Pitch(Pb−Free)3000 / Tape & Reel7WBD3306CMX1TCG ULLGA8 – 0.35 mm Pitch(Pb−Free)3000 / Tape & Reel7WBD3306DMR2G Micro8(Pb−Free)4000 / Tape & Reel(In Development)7WBD3306DTR2G TSSOP8(Pb−Free)4000 / Tape & Reel†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.UDFN8 1.8 x 1.2, 0.4P CASE 517AJ −01ISSUE ONOTES:1.DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.2.CONTROLLING DIMENSION: MILLIMETERS.3.DIMENSION b APPLIES TO PLATEDTERMINAL AND IS MEASURED BETWEEN 0.15 AND 0.30 mm FROM TERMINAL TIP .4.MOLD FLASH ALLOWED ON TERMINALS ALONG EDGE OF PACKAGE. FLASH MAY NOT EXCEED 0.03 ONTO BOTTOM SURFACE OF TERMINALS.5.DETAIL A SHOWS OPTIONALCONSTRUCTION FOR TERMINALS.DIM MIN MAX MILLIMETERS A 0.450.55A10.000.05A30.127 REF b 0.150.25D 1.80 BSC E 1.20 BSC e 0.40 BSC L 0.450.55b20.30 REF L10.000.03L20.40 REFNOTE 5L1DETAIL A0.328XDIMENSIONS: MILLIMETERSMOUNTING FOOTPRINT*7XSOLDERMASK DEFINED*For additional information on our Pb −Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.ULLGA8 1.45x1.0, 0.35PCASE 613AA −01ISSUE ANOTES:1.DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.2.CONTROLLING DIMENSION: MILLIMETERS.3.DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.15 AND 0.30 mm FROM THE TERMINAL TIP .4.A MAXIMUM OF 0.05 PULL BACK OF THEPLATED TERMINAL FROM THE EDGE OF THEPACKAGE IS ALLOWED.8XDIM MIN MAX MILLIMETERS A −−−0.40A10.000.05b 0.150.25D 1.45 BSC E 1.00 BSC e 0.35 BSC L 0.250.35L10.300.40SOLDERMASK DEFINED*DIMENSIONS: MILLIMETERS7X*For additional information on our Pb −Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.MOUNTING FOOTPRINTULLGA8 1.6x1.0, 0.4P CASE 613AB −01ISSUE ANOTES:1.DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.2.CONTROLLING DIMENSION: MILLIMETERS.3.DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.15 AND 0.30 mm FROM THE TERMINAL TIP .4.A MAXIMUM OF 0.05 PULL BACK OF THEPLATED TERMINAL FROM THE EDGE OF THEPACKAGE IS ALLOWED.8XDIM MIN MAX MILLIMETERS A −−−0.40A10.000.05b 0.150.25D 1.60 BSC E 1.00 BSC e 0.40 BSC L 0.250.35L10.300.40SOLDERMASK DEFINED*DIMENSIONS: MILLIMETERS*For additional information on our Pb −Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.MOUNTING FOOTPRINTULLGA8 1.95x1.0, 0.5PCASE 613AC −01ISSUE ANOTES:1.DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.2.CONTROLLING DIMENSION: MILLIMETERS.3.DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.15 AND 0.30 mm FROM THE TERMINAL TIP .4.A MAXIMUM OF 0.05 PULL BACK OF THEPLATED TERMINAL FROM THE EDGE OF THE PACKAGE IS ALLOWED.DIM MIN MAX MILLIMETERS A −−−0.40A10.000.05b 0.150.25D 1.95 BSC E 1.00 BSC e 0.50 BSC L 0.250.35L10.300.40SOLDERMASK DEFINED*DIMENSIONS: MILLIMETERS7X*For additional information on our Pb −Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.MOUNTING FOOTPRINT分销商库存信息:ONSEMI7WBD3306AMUTCG7WBD3306USG7WBD3306DTR2G7WBD3306AMX1TCG7WBD3306BMX1TCG7WBD3306CMX1TCG 7WBD3306MUTAG。

Transition Networks CPSMC18xx-xxx 18-Slot PointSys

Table of Contents1Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51.1Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51.2Unpacking the CPSMC18xx-xxx Equipment . . . . . . . . . . . . . . . . . .72Slide-in-Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82.1Media Converter Slide-in-Modules . . . . . . . . . . . . . . . . . . . . . . . . .82.1.1Chassis Face Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82.1.2Calculating the Power Consumption . . . . . . . . . . . . . . . . . . . . . .82.1.3Installing the Media Converter Slide-in-Modules . . . . . . . . . . . . .92.1.4Replacing the Media Converter Slide-in-Modules . . . . . . . . . . .102.2Management Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112.2.1Three Types of Management Modules . . . . . . . . . . . . . . . . . . . .112.2.2Installing the Management Modules . . . . . . . . . . . . . . . . . . . . .122.2.3Replacing the Management Modules . . . . . . . . . . . . . . . . . . . . .133Powering the CPSMC18xx-xxx . . . . . . . . . . . . . . . . . . . . . . . .143.1AC Power Supply Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143.2DC Power Supply Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163.3Optional Dual Power Supply Modules . . . . . . . . . . . . . . . . . . . . .183.4Power Supply Module Maintenance . . . . . . . . . . . . . . . . . . . . . .193.4.1Primary/Secondary-Management/Manual Switch . . . . . . . . . . . .193.4.2Installing the Power Supply Module . . . . . . . . . . . . . . . . . . . . . .203.4.3Replacing the Power Supply Module . . . . . . . . . . . . . . . . . . . . .213.4.4Replacing the Power Supply Fuses . . . . . . . . . . . . . . . . . . . . . . .223.5Optional Fan Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .244CPSMC18xx-xxx Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . .254.1Installing the CPSMC18xx-xxx Chassis . . . . . . . . . . . . . . . . . . . . .254.1.1Table Top Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .254.1.2Standard 19-inch Rack Installation . . . . . . . . . . . . . . . . . . . . . . .254.1.3Grounding Lugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .274.2Telco Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .284.3Cascade Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .314.4Connecting the Slide-in-Modules to the Network . . . . . . . . . . . . .334.5Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .335Network Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .345.1Hardware Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .346Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 Cable Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 Contact Us . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41introductionintroductionslide-in-modules1.2Unpacking the CPSMC18xx-xxx EquipmentUse the following list to verify the shipment:ItemPart Number 18-Slot chassis with AC Power SupplyCPSMC1800-20018-Slot chassis with DC Power SupplyCPSMC1810-20018-Slot chassis with AC Power SupplyCPSMC1850-150and two (2) Telco connectors18-Slot chassis with DC Power SupplyCPSMC1850-160and two (2) Telco connectorsPointSystem™Chassis Face Plates (18)CPSFP-200 Power Cord(varies by country)User’s Guide 33185The following items are optional accessories for the C PSMC 18xx-xxx 18-Slot PointSystem™ chassis:ItemPart Number Redundant AC Power Supply ModuleCPSMP-200 (optional)Redundant 48-VDC Power Supply ModuleCPSMP-210 (optional)Redundant Fan ModuleCPSFM-200 (optional)Single-Slot Master Management ModuleCPSMM-120 (optional)Dual-Slot Master Management ModuleCPSMM-200 (optional)FocalPoint™Software DiskA1-7227(included with the management modules)Expansion Management ModuleCPSMM-210 (optional)Management Module Cascade Connector6026 (optional)Telco RJ-21 (male) to RJ-45 Hydra cable21HC45-6 (optional)Telco RJ-21 to RJ-21 (male-to-male) cable21HC21-6 (optional)Rack Mount EarsCPSRE-230 (optional)Selectable media converter slide-in-module(s)(various P/N) - (optional)slide-in-modulesslide-in-modulesslide-in-modulesslide-in-modulesslide-in-modulespower supplypower supplypower supplypower supplypower supplypower supplypower supplypower supplypower supplypower supplychassischassischassischassisFiber Port #2Fiber Port #1CDFTF1001850-1xx are designed for any Transition Networks Slots 7-18 on the CPSMC1850-1xx can accommodate any Transition Networks media converter slide-in-module. However the Telco option will not functionchassisCascading multiple CPSMC18xx-xxx chassisTo cascade two or more CPSMC18xx-xxx chassis:1.Locate one (1) Transition Networks management module cascade cable (withRJ-45 connectors installed at both ends) (P/N 6026) for each set of two (2)chassis to be cascaded.NOTE: Transition Networks management module cascade cables are one (1)meter long. Ensure that the chassis are installed within one (1) meter of eachother.2.At the first chassis in the series: Plug the RJ-45 connector at one end of thecascade cable into the management module’s RJ-45 port labeled “OUT”.3.At the next chassis in the series: Plug the RJ-45 connector at the other end of thecascade cable into the management module’s RJ-45 port labeled “IN”.4.At the same chassis as in step 3: Plug the RJ-45 connector at one end of thecascade cable into the management module’s RJ-45 port labeled “OUT”.5.At the next chassis in the series: Plug the RJ-45 connector at the other end of thecascade cable into the management module’s RJ-45 port labeled “IN”.6.Repeat steps 4 and 5 until all chassis have been connected.chassisnetwork mgmt.network mgmt.6Troubleshooting1.Are any of the power LEDs on any of the slide-in-modules illuminated, AND arethe fans operating?YES•The chassis is receiving power. Proceed to the next step.NO•Check all power supply cables for proper connection.•For AC power: Ensure the AC receptacle on the wall is supplying power.•If the fuse for the AC receptacle on the wall blows repeatedly, have the ACreceptacle inspected by a qualified electrician.•For DC power: Ensure the DC power supply is supplying power.•Check the fans to see if they are operating.•C ontact Technical Support: U.S./C anada: 1-800-260-1312, International:00-1-952-941-7600.2.For the management modules (CPSMM-120, CPSMM-200, CPSMM-210), areANY of the power LEDs NOT illuminated?NO•All management modules are receiving power. Proceed to the next step.YESFor those management modules where the power LED is NOT illuminated:•Ensure the management module is firmly seated in the slot.•Press the RESET button on the management module.•C ontact Technical Support: U.S./C anada: 1-800-260-1312, International:00-1-952-941-7600.3.For the remaining slide-in-modules, are ANY of the power LEDs NOTilluminated?NO•All slide-in-modules are receiving power. Proceed to the next step.YESFor those slide-in-modules where the power LED is NOT illuminated:•Ensure the slide-in-module is firmly seated in the slot.•C ontact Technical Support: U.S./C anada: 1-800-260-1312, International:00-1-952-941-7600.4.To determine if a fault is due to a software problem, consult the troubleshootingsection of the Focal Point™ 2.0 Management Appl ication and CPSMM100Firmware User’s Guide (P/N 33293). This manual is available on the enclosedapplication CD and on-line at .5.To determine if a fault is due to an individual management module or slide-in-troubleshooting module, consult the troubleshooting section of the user’s guide for thatparticular module.6.If none of the solutions listed in this section resolves the problem, contactTechnical Support: U.S./Canada: 1-800-260-1312, International: 00-1-952-941-7600.Cable SpecificationsNull Modem CableThe Null Modem Cable is used for connecting a terminal or terminal emulator tothe management module’s DB-9 connector to access the command-line interface.The table below shows the pin assignments for the DB9 cable.Function Mnemonic PinCarrier Detect CD1Receive Data RXD2Transmit Data TXD3Data Terminal Ready DTR4Signal Ground GND5Data Set Ready DSR6Request To Send RTS7Clear To Send CTS8The table below shows the pin assignments for the RS-232 null modem cable.RJ-45 CableCategory 5:Gauge:24 to 22 AWGAttenuation: 22.0 dB /100m @ 100 MHzMaximum Cable Distance:100 meters• Straight-through OR crossover cable may be used.• Shielded twisted-pair(STP) OR unshielded twisted-pair (UTP) may be used.• Pins 1&2 and 3&6 are the two active pairs in an Ethernet network.(RJ-45 Pin-out: Pin 1 = TD+, Pin 2 = TD-, Pin 3 = RD+, Pin 6 = RD-)• All pin pairs (1&2, 3&6, 4&5, 7&8) are active in a gigabit Ethernet network.• Use only dedicated wire pairs for the active pins:(e.g., blue/white & white/blue, orange/white & white/orange, etc.)• Do not use flat or silver satin wire.COAX CableCoaxial cable media is used for circuits such as DS3, E1 and 10Base-2 Ethernet.The impedance of the coaxial cable is determined by the interface type, forexample:•75 ohm for DS3.•50 ohm for 10Base-2 Ethernet.Special attention should be given to the grounding requirements of coaxial cablecircuits. Installation may require grounding at both cable ends or only one cableend or neither cable end.Cable Shield GroundingMedia converter network cabling my be shielded or unshielded. Shielded cablesMUST be grounded according to the specific requirements of the media and porttype. For example:•Shielded RJ-45 cable used for 100Base-Tx Ethernet MUST be grounded at both cable endpoints via shielded RJ-45 jacks.•Shielded RS-232 cable MUST have the shield grounded at both cable endpoints via shielded RS-232 connectors.•COAX cable used for 10Base-2 Ethernet MUST only be grounded at a single point.The media converters provide a jumper option or other grounding mechanism asrequired. Special attention should be given to the grounding requirements ofcoaxial cable circuits. Installation may require grounding at both cable ends or onlyone cable end or neither cable end. See the individual media converter user’s guidefor cable/port grounding requirements.WarrantyLimited Lifetime WarrantyEffective for products shipped May 1, 1999 and after. Every Transition Networks' labeled product purchased after May 1, 1999 will be free from defects in material and workmanship for its lifetime. This warranty covers the original user only and is not transferable.This warranty does not cover damage from accident, acts of God, neglect, contamination, misuse or abnormal conditions of operation or handling, including over-voltage failures caused by use outside of the product's specified rating, or normal wear and tear of mechanical components. If the user is unsure about the proper means of installing or using the equipment, contact Transition Networks' free technical support services.To establish original ownership and provide date of purchase, please complete and return the registration card accompanying the product or register the product on-line on our product registration page.Transition Networks will, at its option:•Repair the defective product to functional specification at no charge,•Replace the product with an equivalent functional product, or•Refund the purchase price of a defective product.To return a defective product for warranty coverage, contact Transition Networks' technical support department for a return authorization number. Transition's technical support department can be reached through any of the following means: Technical Support is available 24 hours a day at:•800-260-1312 x 200 or 952-941-7600 x 200•fax 952-941-2322•*******************************•live web chat: and click the “Transition Now” link•voice mail 800-260-1312 x 579 or 952-941-7600 x 579•All messages will be answered within one hour.Send the defective product postage and insurance prepaid to the following address: CSI Material Management Centerc/o Transition Networks508 Industrial DriveWaconia, MN 55387 USAAttn: RETURNS DEPT: CRA/RMA # ___________Failure to properly protect the product during shipping may void this warranty. The return authorization number must be written on the outside of the carton to ensure its acceptance. We cannot accept delivery of any equipment that is sent to us without a CRA or RMA number.The customer must pay for the non-compliant product(s) return transportation costs to Transition Networks for evaluation of said product(s) for repair or replacement.Transition Networks will pay for the shipping of the repaired or replaced in-warranty product(s) back to the customer (any and all customs charges, tariffs, or/and taxes are the customer's responsibility).Before making any non-warranty repair, Transition Networks requires a $200.00 charge plus actual shipping costs to and from the customer. If the repair is greater than $200.00, an estimate is issued to the customer for authorization of repair. If no authorization is obtained, or the product is deemed not repairable, Transition Networks will retain the $200.00 service charge and return the product to the customer not repaired. Non-warranted products that are repaired by Transition Networks for a fee will carry a 180-day limited warranty. All warranty claims are subject to the restrictions and conventions set forth by this document.Transition Networks reserves the right to charge for all testing and shipping incurred, if after testing, a return is classified as "No Problem Found."THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTIC ULAR PURPOSE, ARE EXPRESSED OR IMPLIED. TRANSITION NETWORKS IS NOT LIABLE FOR ANY SPEC IAL, INDIREC T, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY. AUTHORIZED RESELLERS ARE NOT AUTHORIZED TO EXTEND ANY DIFFERENT WARRANTY ON TRANSITION NETWORKS' BEHALF.。

毛衫一般问题中英文对照

毛衫一般问题中英文对照(总56页)--本页仅作为文档封面，使用时请直接删除即可----内页可以根据需求调整合适字体及大小--答1：你说法的那些都是一些织法，比如：织法--织机1 plain / jersey 单边2 tubular 元筒3 jersey tubular 单边元仝4 rib 坑条5 half milano 三平6 full needle 四平7 half cardigan 珠地8 cable 扭绳9 pointelle 挑孔10 raised stitch谷波11 ripple /ottoman 谷波12 ruffle / ripple / ottoman / bourrelet 谷波13 picot 狗牙边14 full milano /double knits 打鸡15 stripe / border 间色16 horzontal striped 横间17 vertical striped 直间18 torque/twisting 扭骨19 stripe 间色20 racking stitch /zig-zag stitch缦花/缦波21 links 令士22 plait / flated 冚毛23 reversed stitch底针24 fashioning narrow 收花25 fashioning mark 收花26 exelet stitch网眼组织27 crochet stitch手勾边28 tubular 元仝29 seeds stitch 1X1令士30 float jacquard 有底毛拨花（单）31 half milano /semi double knit 三平32 links / lynx stitch / purl 令士33 full milano / double knit 打鸡34 pack / zigzag stitch曼波35 tuck stitch / fancy stitch打花36 packed half cardigan 曼花珠地37 1X1rib single / double 1X1单/双39 cable 扭绳40 full cardigan 柳条41 wall stitch搬针42 double jacquard 拨花（双）43 pointelle / eyelet / lace 挑孔44 tub jacquard 元筒拨花45 reverse jersey 反底单边46 plaiting / plated 冚毛其它1. intarsia 挂毛2. jacquard 拨花3. 50 half cardigan stitch珠地4. full cardigan stitch柳条5. hand crochet 手勾6. computer knit 电机7. auto machine 电机8. tuck stitch打花1.組織結构名稱單邊 plain jersey, single knit坑條，羅紋 rib三平 half milano,semi-double knit打雞 full milano四平 double knit柳條 full cardigan珠地half cardigan扭繩 cable搬針 racking stitch打花 tuck stitch谷波ottman/ripple撥花 zig-zag stitch挑吼 point elle間色，條子 stripe令士 links 2.3.4.5.代号英语简称代号英语简称AC ACETATE醋纤PU POLYURETHANE/SPANDEX氨纶PC ACRYLIC腈纶RA RAMIE苎麻WP ALPACA羊驼SE SILK蚕丝WA ANGORA兔毛VI VISCOSE RAYON粘纤WK CAMEL驼绒WO WOOL羊毛WS CASHMERE羊绒MC MODAL木代尔CO COTTON棉LC LYOCELL绿赛尔CU CUPRAMMONIUMRAYON铜纤维TS TENCEL天丝WL LAMBWOOL羔毛BM BAMBOO竹纤维LI LINEN亚麻SB SOYBEAN大豆纤维ME METALLIC金纤维AL ALBUMEN蛹蛋白纤维MD POLYNOSIC粘胶HM HEMP大麻WM MOHAIR马海毛RY RAYON人造丝PA POLYAMIDE/NYLON锦纶JU JUTE黄麻PE POLYESTER涤纶LY LYCRA莱卡常见纺织品材料分特数、支数、旦数换算对照表分特数（T）英制支数（S）公制支数（N）旦数（D）国际纺织常用单位1米=码1码=米1公斤=磅1磅=公斤1米=英寸1英寸=米1支(英制)=840码1支(公制)=1000米1公支=英支1英支=公支6.7.8.9.10.11.12.2. 布料成分名称acetate 醋脂纤维acetate醋脂纤维acrylic 腈纶aliginatefiber 藻酸纤维asbestos fibre 石棉纤维bast 树内皮blend fiber 混合纤维braid饰带cashmere山羊绒cellulose ester 醋、人造丝cellulose纤维素felting 制毡材料filament 长纤维flax亚麻纤维hemp 大麻jute黄麻man-made fiber人造纤维modacrylic 变性腈纶mohair马海毛polyamide 聚烯烃纤维polyester涤纶、聚脂纤维polyethylene 聚乙烯纤维polymer高聚物polyolefin聚烯烃纤维polypropylene丙沦rayon 人造丝regenerated fiber 再生纤维spandex/elastomer 弹性纤维staple 短纤纱synthetic 合成纤维synthetic 合成纤维textuered yarn变形纱tufting 裁绒viscose 粘胶纤维woven fabric 梭织布3. 纤维缩写代号纤维名称缩写代号天然纤维丝S 麻L 人造纤维粘胶纤维R 醋酯纤维 CA 三醋酯纤维 CTA 铜氨纤维 CVP富强纤维 Polynosic 蛋白纤维 PROT 纽富纤维 Newcell合成纤维碳纤维 CF聚苯硫醚纤维 PPS 聚缩醛纤维 POM酚醛纤维 PHE 弹性纤维 PEA聚醚酮纤维PEEK 预氧化腈纶PANOF 改性腈纶MAC 维纶PVAL 聚乙烯醇缩乙醛纤维 PVB 氨纶PU 硼纤维EF 含氯纤维CL 高压型阳离子可染聚酯纤维CDP 常压沸染阳离子可染纤维ECDP 聚乳酸纤维PLA 聚对苯二甲酸丙二醇酯纤维PTT 聚对苯二甲酸丁二醇酯纤维PBT 聚萘二甲酸乙二醇酯纤维PEN 聚乙烯、聚丙烯共混纤维ES 氯纶Pvo 聚对本二氧杂环已酮纤维PDS 弹性二烯纤维ED 同位芳香族聚酰胺纤维PPT 对位芳香族聚酰胺纤维PPTA 芳砜纶PDSTA 聚酰亚胺纤维Pi 超高强高模聚乙烯纤维CHMW-PE其他金属纤维MTF 玻璃纤维GE4. 洗水嘜朮語一、干洗Dry Cleaning一般干洗 dryclean专业干洗 Professionally Dryclean商业干洗Commercially Dryclean以干洗为最佳 Drycleanning Recommened短干洗周期 Short Cycle干洗剂抽脱时间最短 Minimum Extraction低水分 Reduced or Low Moisture干洗过程中不可加水分 No water In System不可用蒸汽 No Steam二、水洗 Washing可机洗 Machine Washable不可水洗 Do not Wash 不可商业洗涤 Do not have Commercially Launder可用家庭式洗涤 Home Launder手洗 Hand Wash手洗不可搓压 Hand Wash do not Rub冷水洗 Cold Wash温水洗 Warm Wash热水洗 Hot Wash不可水煮 Do not Boil少洗衣量Small Load温和洗衣程序 Delicate/Gentle Cycle持久压力程序 Durable Press Cycle /Permanent分开洗涤 Wash Separately可与类似色衣物同时洗涤 With Like Color与深色衣物分开洗涤 Wash Dark Color Separetely翻出底面洗涤Wash Inside Out不可拧干 No Wring/ Do not Wring不可拧绞 No Twist/ Do not Twist温水清洗 Warm Rinse冷水清洗 Cold Rinse彻底清洗 Rinse Thoroughly不可脱水 No Spin/ Do not Spin普通旋转速度脱水 Normal Spin较短较慢程序脱水 Reduced Spin不可浸泡 Do not Soak只可用皂片 Use Pure Soap Flake only只可抹洗或擦洗 Damp Wipe only三、漂白 Bleaching 需要时漂白 Bleaching when Needed不可漂白 No bleach / Do not Bleach只可用非氯性漂白剂 Only Non-Chlorine Bleach四、干衣 Drying滴干 Drip Dry 挂干 Line Dry荫凉挂干 Line Dry in Shade避热挂干 Line Dry away from Heat 用烘干机烘干 Tumble Dry用烘干机中温烘干 Tumble Warm用烘干机低温烘干 Tumble Cool平铺晒干 Flat Dry定位干衣 Block to Dry用蒸汽烘干Steam Dry不用蒸汽 No Steam / Do not Steam风柜吹干 Cabinet Dry Cool五、熨烫 Ironing and Pressing热烫 Hot Iron温烫 Warm Iron低温烫 ColdIron不可熨 Do not Iron反面熨 Iron on Wrong Side用蒸汽熨烫 SteamPress/Iron在湿润时熨烫 Iron Damp用布间隔熨烫 Use Press Cloth好东西大家分享毛衫部分做法中英文对照jersey knit / plain 单边reverse jersey 反底单边jersey roll 单边卷边tubular 圆筒full needle 四平half milano 三平cast off 套针milano / full milano 打鸡full cardigan 柳条half cardigan 珠地jacquard 拨花intarsia 无底毛拨花intarsta 挂毛ottoman 谷波rib 坑条1×1 single 1×1 单flat back 底密针links 令士deminauations 收花full fashion 收花diminution / dart 搬针cross stitch 搭针cable 扭绳lace / eyelet 挑窿self start 原身出clean finish 原身较结crossing rib v-tip v领尖位做搭坑/针tight tension 字码较结tatting 梭织法crochet 锁边hand crochet 手勾边hand stitch 手钉bar tack 机钉over lock / bar tack 鈒骨cover stitch / flat lock 嵌虾松embroidery 车花drop stitch 放针mitred 挑杏嘴rivet 撞钉bead 钉珠pleat 打褶mending 查补light-inspection 照灯knitting 织衫linking 缝衫sewing 车线start-over 驳线shave 修剪washing 洗水pressing 烫衫over-lap 胸贴 / 领贴重搭printing 印花dye 染色stripe / contrast color 间色tip 撞色plaited 嵌毛twisted 拼毛miscellancous 混杂encase 包入shrink 收缩mutilate 使残缺whip 紧绕于某物上/包缝区分英语略语中文日本语A alternately alt 交叉，留一段空间交互に、一段おきにB back 后面/向后后begin beg 开始始めC continue cont 继续続けるchain ch 连锁锁crochet 钩针编织かぎ针编みcast on (casting on) 开始织作り目（する）、编み始めcast off (casting off) 织完了伏止め（する）、编み终わりcable stitch c 编绳子一样的交叉织なわ编、交差编みcable needle 绳编针なわ编针crossed stitch cr 交叉交差D double dble 双针ダブルdouble crochet dc 细针织细编みdouble treble dtr 长针织长々编みdecrease dec 减针减らし目（する）draw through a loop从绒线处拉掉针数渡り（糸ループ）から目を引き抜くdrop one stitch 两针里放掉一针一目落とす、一目ほどくE edge 边缘縁F following foll 下一个次のflat knitting 平针平编みflont 前面前fasten off 拧起来しぼって止めるG garter stitch (K every row) garter st 停步织法ガーター编みH hem 边缘ヘム、縁half treble 中长针中长编みhalf double crochet 中长针中长编みI inch in 英寸，2。

西门子PLC-STL编程小手册

输入继电器 I输出继电器Q通用辅助继电器(位存储区)M MB:字节 MW:字 MD:双字节特殊继电器SM变量存储器V VB:字节 VW:字 VD:双字节局部变量存储器L顺序控制继电器S定时器T TON:接通延时定时器 TONR:有记忆接通延时定时器 TOF:断开延时定时器计数器C模拟量输入映像寄存器AI模拟量输出映像寄存器AQ高速计数器HC累加器AC3. 指令集表布尔指令LD N 装载(开始的常开触点)LDI N 立即装载LDN N 取反后装载(开始的常闭触点)LDNI N 取反后立即装载A N 和(串联的常开触点)AI N 立即和AN N 取反后和(串联的常开触点)ANI N 取反后立即和O N 或(并联的常开触点)OI N 立即或ON N 取反后或(并联的常开触点)ONI N 取反后立即和LDBx N1，N2装载字节比较结果N1(x：＜，＜＝，＝，＞＝，＞，＜＞＝)N2ABx N1，N2和字节比较结果N1(x：＜，＜＝，＝，＞＝，＞，＜＞＝)N2OBx N1，N2或字节比较结果N1(x：＜，＜＝，＝，＞＝，＞，＜＞＝)N2LDWx N1，N2装载字比较结果N1(x：＜，＜＝，＝，＞＝，＞，＜＞＝)N2AWx N1，N2和字节比较结果N1(x：＜，＜＝，＝，＞＝，＞，＜＞＝)N2OWx N1，N2或字比较结果N1(x：＜，＜＝，＝，＞＝，＞，＜＞＝)N2LDDx N1，N2装载双字比较结果N1(x：＜，＜＝，＝，＞＝，＞，＜＞＝)N2ADx N1，N2和双字比较结果N1(x：＜，＜＝，＝，＞＝，＞，＜＞＝)N2ODx N1，N2或双字比较结果N1(x：＜，＜＝，＝，＞＝，＞，＜＞＝)N2LDRx N1，N2装载实数比较结果N1(x：＜，＜＝，＝，＞＝，＞，＜＞＝)N2ARx N1，N2和实数比较结果N1(x：＜，＜＝，＝，＞＝，＞，＜＞＝)N2ORx N1，N2或实数比较结果N1(x：＜，＜＝，＝，＞＝，＞，＜＞＝)N2NOT 栈顶值取反EU 上升沿检测ED 下降沿检测= N 赋值（线圈）=I N 立即赋值S S_BIT，N 置位一个区域R S_BIT，N 复位一个区域SI S_BIT，N 立即置位一个区域RI S_BIT，N 立即复位一个区域传送、移位、循环和填充指令MOVB IN，OUT 字节传送MOVW IN，OUT 字传送MOVD IN，OUT 双字传送MOVR IN，OUT 实数传送BIR IN，OUT 立即读取物理输入字节BIW IN，OUT 立即写物理输出字节BMB IN，OUT，N 字节块传送BMW IN，OUT，N 字块传送BMD IN，OUT，N 双字块传送SWAP IN 交换字节SHRB DATA，S_BIT，N 移位寄存器SRB OUT，N 字节右移N位SRW OUT，N 字右移N位SRD OUT，N 双字右移N位SLB OUT，N 字节左移N位SLW OUT，N 字左移N位SLD OUT，N 双字左移N位RRB OUT，N 字节右移N位RRW OUT，N 字右移N位RRD OUT，N 双字右移N位RLB OUT，N 字节左移N位RLW OUT，N 字左移N位RLD OUT，N 双字左移N位FILL IN，OUT，N 用指定的元素填充存储器空间逻辑操作ALD 电路块串联OLD 电路块并联LPS 入栈LRD 读栈LPP 出栈LDS 装载堆栈AENO对ENO进行和操作ANDB IN1，OUT 字节逻辑和ANDW IN1，OUT 字逻辑和ANDD IN1，OUT 双字逻辑和ORB IN1，OUT 字节逻辑或ORW IN1，OUT 字逻辑或ORD IN1，OUT 双字逻辑或XORB IN1，OUT 字节逻辑异或XORW IN1，OUT 字逻辑异或XORD IN1，OUT 双字逻辑异或INVB OUT 字节取反(1的补码)INVW OUT 字取反INVD OUT 双字取反表、查找和转换指令ATT TABLE，DATA 把数据加到表中LIFO TABLE，DATA 从表中取数据，后入先出FIFO TABLE，DATA 从表中取数据，先入先出FND= TBL，PATRN，INDXFND＜＞ TBL，PATRN，INDXFND＜TBL，PATRN，INDXFND＞TBL，PATRN，INDX 在表中查找符合比较条件的数据BCDI OUT BCD码转换成整数IBCD OUT 整数转换成BCD码BTI IN，OUT 字节转换成整数IBT IN，OUT 整数转换成字节ITD IN，OUT 整数转换成双整数TDI IN，OUT 双整数转换成整数DTR IN，OUT 双整数转换成实数TRUNC IN，OUT 实数四舍五入为双整数ROUND IN，OUT 实数截位取整为双整数ATH IN，OUT，LEN ASCII码→16进制数HTA IN，OUT，LEN 16进制数→ASCII码ITA IN，OUT，FMT 整数→ASCII码DTA IN，OUT，FMT 双整数→ASCII码RTA IN，OUT，FMT 实数→ASCII码DECO IN，OUT 译码ENCO IN，OUT 编码SEG IN，OUT7 段译码中断指令CRETI 从中断程序有条件返回ENI 允许中断DISI 禁止中断ATCH INT，EVENT 给事件分配中断程序DTCH EVENT 解除中断事件通信指令XMT TABLE，PORT 自由端口发送RCV TABLE，PORT 自由端口接收NETR TABLE，PORT 网络读NETW TABLE，PORT 网络写GPA ADDR，PORT 获取端口地址SPA ADDR，PORT 设置端口地址高速计数器指令HDEF HSC，MODE 定义高速计数器模式HSC N 激活高速计数器PLS X 脉冲输出数学、加1减1指令+I IN1，OUT+D IN1，OUT+R IN1，OUT整数，双整数或实数法IN1+OUT=OUT-I IN1，OUT-D IN1，OUT-R IN1，OUT整数，双整数或实数法OUT-IN1 =OUTMUL IN1，OUT*R IN1，OUT*I IN1，OUT*D IN1，OUT整数乘整数得双整数实数、整数或双整数乘法IN1×OUT=OUTMUL IN1，OUT/R IN1，OUT/I IN1，OUT/D IN1，OUT整数除整数得双整数实数、整数或双整数除法OUT/IN1=OUTSQRT IN，OUT 平方根LN IN，OUT 自然对数LXP IN，OUT 自然指数SIN IN，OUT 正弦COS IN，OUT 余弦TAN IN，OUT 正切INCB OUT 字节加1INCW OUT 字加1INCD OUT 双字加1DECB OUT 字节减1DECW OUT 字减1DECD OUT 双字减1PID Table，Loop PID回路定时器和计数器指令TON Txxx，PT 通电延时定时器TOF Txxx，PT 断电延时定时器TONR Txxx，PT 保持型通延时定时器CTU Txxx，PV 加计数器CTD Txxx，PV 减计数器CTUD Txxx，PV 加/减计数器实时时钟指令TODR T 读实时时钟TODW T 写实时时钟程序控制指令END 程序的条件结束STOP 切换到STOP模式WDR 看门狗复位(300 ms)JMP N 跳到指定的标号LBL N 定义一个跳转的标号CALL N(N1，…)调用子程序，可以有16个可选参数CRET 从子程序条件返回FOR INDX，INIT，FINAL NEXTFor/Next循环LSCR N 顺控继电器段的启动SCRT N 顺控继电器段的转换SCRE 顺控断电器段的结束通信指令指令描述NETR TBL，PORT 网络读NETW TBL，PORT 网络写XMT TBL，PORT 发送RCV TBL， PORT 接收GPA ADDR，PORT 读取口地址SPA ADDR，PORT 设置口地址TBL的定义VB10DAEO 错误码VB11 远程站点地址VB12 指向远程站点的数据区指针(I，Q，M，V)VB13VB14VB15VB16数据长度(1～16B)VB17数据字节0VB18数据字节1VB32数据字节15。

PR1500专业级双向无线电规格表说明书

PR1500Professional Series Two-Way Radio32 ChannelsLarge Raised Channel andOn/Off Volume KnobsEasy to operate with gloves3 Position Concentric Switch Allows customization of radio featuresProgrammableEmergency ButtonAlerts dispatcher in emergencySealed Accessory Connector Backward compatible with existing accessoriesEnhanced Audio Features Noise reduction softwareand Audio Gain Control (CPS programmable) allow audio customizationAdjustable Power LevelsHelp preserve battery life Priority/DynamicPriority Channel Scan Frequently scan higher priority channels. Easily add or delete scan list membersMonitor/Permanent Monitor Allows continuous channel monitoring3 Programmable Side Buttons and Large Textured Push-To-Talk ButtonEasy access to favorite features and good tactile response. Easy to operate when wearing gloves IMPRES™Energy SystemStandard Package includesan IMPRES charging andreconditioning system, a help inautomating battery mainte-nance, optimizing battery cyclelife, and maximizing talktimePR1500Standard Package• IMPRESNiMH 1850 mAh Battery• IMPRESSingle Unit Rapid Charger• VHF or UHF Antenna• 2.25 Inch Belt Clip• Remote SpeakerMicrophone Adapter• Accessory ConnectorDust Cover• User Guide CD• 2-Year Standard WarrantyAdditional FeaturesSend and receive information ina variety of ways:Quik-Call II™and MDC1200 Signaling• Selective Call (Decode)Receive a call froma speciﬁc group or individual• Call Alert (Decode)Receive alerts of incomingcalls when a short distancefrom your radioMDC1200 Signaling Only• Push-to-Talk ID (Encode)Identify outgoing calls.• Radio C heck (Decode)Lets others check usersradio status• Emergency (Encode)Alerts dispatcher in urgentsituations• SelectiveRadio Inhibit (Decode)Allows system owner todisable stolen or missingradiosWhen it comes to public safety, a communityshouldn’t settle for “good enough.”keep our community safe and secure. That’s why so much innovation went into designing the PR1500 Professional Series two-way radio from Motorola.rugged and tough. But what really sets this radio apart is how it performs. You’ll notice a rich, full audio that can be customized for your ear as well as the environment. The PR1500 also offers enhanced performance that delivers wide range and improved battery life.P25 Conventional UpgradeableWith a single software upgrade, the PR1500 becomes P25 interoperable. This essential feature gives you the ability to interact with other networksin times of crisis.FACTORY MUTUAL APPROVALSThe PR1500 is Factory Mutual approved and Canadian Standard Association approved as intrinsically safe for use in Classes I, II, and III, Division 1, Groups C, D, E, F and G, as well as non-incendive use in Class I, Division 2, Groups A, B, C and D on models ordered with the Factory Mutual option, and battery.Accelerated Life T estMotorola’s Accelerated Life Test (ALT) is a developmental process of rigorous laboratory testing that simulates years of ﬁeld use. Motorola has a ﬁrm commitment to quality and reliability. These radios have been designed,manufactured and tested to achieve high levels of component and workman-ship quality. Motorola radios are designed to minimize costly repairs and downtime.PR1500 PROFESSIONAL SERIES Two-Way RadioMOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Ofﬁce. All other product or service names are the property of their registered owners. © Motorola, Inc. 2007.MD-PR1500SPECS 5/07,。

nm1250s3300说明书

nm1250s3300说明书一、产品介绍NM1250S3300是一款先进的电动自行车电池，采用高能量密度的锂离子电池技术。

该电池具有轻巧、稳定性高、寿命长等特点，是电动自行车行业的一项重要突破。

经过严格的测试和验证，NM1250S3300被证明是一款安全、可靠、高性能的电池产品。

二、产品特点1.高能量密度：NM1250S3300采用了最新的锂离子电池技术，拥有较高的能量密度，能够提供更长的续航里程。

2.轻巧便携：该电池采用了轻量化设计，重量轻，体积小，便于携带和安装在电动自行车上。

3.长寿命：经过优化设计和严格的质量控制，NM1250S3300的寿命达到了更长的标准，使用时间更持久，循环充放电次数更多。

4.安全可靠：电池采用了多重安全保护设计，如过充保护、过放保护、过流保护、短路保护等，确保电池使用过程中安全可靠。

三、规格参数1.电池类型：锂离子电池2.额定电压：36V3.额定容量：12.5Ah4.最大充电电流：2A5.最大放电电流：20A6. 电池质量：约3.3kg7.充电时间：约4-6小时8.循环寿命：>500次四、使用注意事项1.请使用原装充电器进行充电，禁止使用不合适的充电器或充电线。

2.充电过程中请确保环境通风良好，避免高温环境下充电。

3.请勿将电池长时间放置在高温或潮湿的环境中，以免影响电池寿命。

4.请勿使用过于频繁或过于激烈的充放电，以免缩短电池寿命。

5.如果长时间不使用电池，请放置在干燥、阴凉的地方，并进行适度的充电。

五、售后服务本产品提供一年的免费保修服务，保修期内发生质量问题可享受免费维修或更换服务。

保修期外，我们将提供有偿的维修支持。

六、总结NM1250S3300是一款高性能、安全可靠的电动自行车电池，具有高能量密度、轻巧便携、长寿命等特点。

我们将为用户提供售后服务，并持续改进产品性能和质量，以满足用户的需求和期望。

Motorola HT1250 两向无线电说明书

T W O -W A Y R A D I O SHT1250A s D e d i c a t e d A s Y o u A r e6 Programmable Buttons Easy access to favorite features Adjustable Power Levels Saves battery life Internal VOXHands-free operation with headsetX-Pand Voice Compression Crisper, clearer audio qualityTelephone Interconnect CapableMake and receive phone calls with the radio14-Character AlphanumericDisplay with User-Friendly Icons Information is clear and easy to readRSSI IndicatorDisplays signal strength level Caller IDIncoming caller is identified Emergency Signaling Sends help signalQuik-Call II™ and MDC 1200Signaling (Encode/Decode)Send and receive information via tone or digital signals Battery GaugeFor at-a-glance battery life levels128 Channels (8 Zones)HT1250 features• Small, Lightweight and Durable • 12.5/25 kHz Switchable Channel Spacing • Alarm Clock• Option Board CapabilitiesPortable RadioDual Priority Scan Frequently scan higher priority channelsRepeater Talkaround Unit-to-unit communications bypassing the repeaterEscalert™ Call FeaturesEnsures important signals are heardFront Panel Programmable Phone ListEasily store and retrieve favorite phone numbersEmergency ButtonSound alarm or alert dispatcher in an emergency situationControl ButtonsMenu, navigation, and exit functionsHT1250without keypadHT1250: The Versatile Radio The HT1250™portable radio is anessential tool for growing organizations because of its unique versatility . The radio offers a full menu of advanced signaling features including paging or calling selective radios or groups. Users can store information such as phone numbers, call lists and radio IDs for easy access. And with Motorola'sunique X-Pand ™technology , audio clarity is superb — even in noisy surroundings. The large LCD display is extremelyhelpful in large communication networks,or an important feature in critical situations. The radio of choice is the HT1250 portable. It's the radio that changes with your needs.HT1250HT1250HT1250, Motorola, Professional Radio, As Dedicated As You Are, HT Series, HT1250, X-Pand, Escalert, Dual Priority Scan, and Quik-Call II are trademarks of Motorola, Inc.Specifications subject to change without notice. ©1998 Motorola, Inc. Printed in U.S.A.MD-HT1250-01ReceiverSpecificationsLow BandVHFUHFFrequencies 29.7–42 MHz 136–174 MHz 403–470 MHz 35–50 MHzHum and Noise-45 dB @20/25 kHz -45 dB @12.5 kHz, -50 db @ 25 kHzSensitivity (12 dB SINAD) EIA .30 µV .25 µVSensitivity (20 dB SINAD) ETS .50 µVChannel Spacing 20/25 kHz 12.5/20/25 kHzIntermodulation70 dBAdjacent Channel Selectivity ************/70dB@25kHzSpurious Rejection 70 dB Rated Audio0.5 W Audio Distortion @ Rated Audio 3% typical Audio Response (300 – 3000 Hz)+1 to -3 dB Conducted Spurious Emission -57 dBm < 1 GHz FCC Part 15-47 dBm > 1 GHzGeneral SpecificationsLow BandVHFUHFChannel Capacity 128Power SupplyRechargeable battery 7.5VDimensionsWith NiMH High Capacity Battery 5.40" x 2.26" x 1.50" (137.0 x 57.5 x 37.5 mm)With NiMH Ultra-High Capacity Battery 5.40" x 2.26" x 1.60" (137.0 x 57.5 x 40.0 mm)With NiCd Battery 5.40" x 2.26" x 1.60" (137.0 x 57.5 x 40.0 mm)With Lilon Battery5.40" x 2.26" x 1.30" (137.0 x 57.5 x 33.0 mm)WeightWith NiMH High Capacity Battery 15.0 oz. (420g)With NiMH Ultra-High Capacity Battery 17.5 oz. (500g)With NiCd Battery 15.8 oz. (450g)With Lilon Battery12.5 oz. (350g)Average Battery Life @ 5/5/90 Duty Cycle Low High Low High Power PowerPowerPowerWith NiMH High Capacity Battery 11 hrs 8 hrs 11 hrs 8 hrs With NiMH Ultra-High Capacity Battery 14 hrs 11 hrs 14 hrs 11 hrs With NiCd Battery 12 hrs 8 hrs 12 hrs 9 hrs With Lilon Battery11 hrs 7 hrs11 hrs8 hrsPortable Military Standards 810 C, D, & EApplicable MIL-STD810C 810D 810E Methods ProceduresMethods ProceduresMethods ProceduresLow Pressure 500.11500.22500.32High Temperature 501.11,2501.21,2501.31,2Low Temperature 502.12502.21,2502.31,2Temperature Shock 503.11503.21503.31Solar Radiation 505.11505.21505.31Rain 506.11,2506.21,2506.31,2Humidity 507.12507.22,3507.32,3Salt Fog 509.11509.21509.31Dust 510.11510.21510.31Vibration 514.28,10514.31514.41Shock 516.21,2,5516.31,4516.41,4Factory Mutual ApprovalsFactory Mutual has given the HT1250 an intrinsically safe rating for use in Classes I, II, and III, Division 1, Groups C,D, E, F and G, as well as non-incendive use in Class I, Division 2, Groups A, B, C and D on models ordered with the Factory Mutual option.Environmental SpecificationsOperating Temperature -30 to +60°C Storage Temperature -55 to +85°C Humidity 95% RH @ 8 Hr.ESDIEC 801-2 KV Water IntrusionIP54TransmitterSpecificationsLow BandVHFUHFFrequencies 29.7–42 MHz 136–174 MHz 403–470 MHz35–50 MHz Power Output 1–6 W 1–5 W 1–4 W Frequency Stability±10 ppm±5 ppm @ 25 kHz (-30°C to +60°C, +25°Ref.)±**************Modulation Limiting +5.0 @ 20 kHz ±***********/±4.0@20kHz/+5.0 @ 25 kHzSpurs/Harmonics-36 dBm < 1 GHz-30 dBm > 1 GHzChannel Spacing 20/25 kHz 12.5/20/25 kHzFM Hum & Noise -40 dB typicalAdjacent Channel Power**********,-70dB@25kHzAudio Response (300 – 3000 Hz)+1 to -3 dB Audio Distortion 3%FM Modulation25 kHz 12.5 kHz 25/30 kHz 12.5 kHz 25 kHz 16KOF3E 11KOF3E 16KOF3E 11KOF3E 16KOF3EPortable Two-Way Radio Specifications。

DCS常用单词--中英文对照解析

英文全称英文缩写中文( front ） big platen BIG PLTN 大屏1st extraction 1ST EXTR 一段抽汽abnormal ABNM 异常accident ACDT 事故acknowledge ACK 确认act ACT 动作active ACTIVE 激励active power A_PW 有功功率adjusting ADJ 调整admission ADMS 进汽Air AIR 空气Air flow AIR FLOW 风量air leakage AL 漏风air preheater APH 空预器air side AIR_S 空侧alarm ALM 报警alarm window ALM WIN 光字牌all phases 3 PH 全相alternating current AC 交流area AREA 分区area AREA 区ash hopper ASH HOP 灰斗atmospheric relief valve ATM REL VLV 对空排汽门atomizing ATOM 雾化attemperating DT 减温attemperator,desuperheater DTR 减温器automatic AUTO 自动Auxiliary AUX 辅助axial displacement AXI DISP 轴向位移Back BA 后be out of order N_ORDER 失灵bearing BEAR 轴承Bearing box BEAR BOX 轴承箱Bearing vibration BEAR VIB 轴振begin BEGIN 开始behind BH 在…的后面belt BELT 皮带bin BIN 煤粉仓bin, pulverized coal bunker BIN 粉仓blocking BLOCK 堵塞Blowdown BLDN 排污blowdown BLOWDOWN 锅炉排污bobbin BBIN 筒体body BODY 本体Boiler BLR 锅炉boiler feeder water pump turbine BFPT 小汽机boiler hall BLR HALL 锅炉房booster pump BP 前置泵Bottom BTM 底bowl BOWL 磨碗box BOX 盒Branch BRCH 分支，支路breaker BRK 断路器buchholtz BCHTZ 瓦斯Burner BNR 燃烧器burning exhaust BRNHT 燃尽bus BUS 母线Bush BUSH 轴瓦butterfly valve BFV 蝶阀bypass BYP 旁路Cabinet CAB 机柜calculation CAL 计算cation exchanger CATION EXCHANGER 阳离子交换器ceiling CLNG 顶棚Center CTR 中心Channel CHANL 通道Charge CHARGE 充电Check CHK 校正check valve， non—return valve CHK V，CHKV 逆止门Chief CHF 总Circuit CIRCUIT 电路circulating CIRC 循环circulating water CIRC WTR 循环水classifier CLSFER 粗粉分离器clean CLEAN 净close command CLS CMD,CLOS CMD 关命令close switch CLS SWTH 合闸Closed CLSD 已关, 关状态closed circulating cooling water CCCW 闭式循环冷却水coal blocking COAL BLOCK 堵煤coal carry COAL_CARY 输煤coal conveyer COAL CVR 输煤机coal feeder COAL FDR,FDR 给煤机coal mill，coal pulverizer MILL，PULV 磨煤机Cobblestone STONE 石子cog COG 齿部coil COIL 线圈cold air CLD AIR 冷风collar COLLAR 轭部Collection CLCT 收集collection water pump CLCT W_PMP 收集水泵combined steam valve CSV 联合汽门Combiner COMBNR 组件command CMD 指令，命令Common COM 公用common transformer C_XFMR，CX 公用变Complex COMP 复合compose CMPS 合成compressed air CPRESS AIR 压缩空气condensate CNDS 凝结condensate pump CNDS PMP 凝结水泵condensated water CNDS WTR 凝结水condenser COND 凝汽器conductivity CONDUCT 导电度connector CNTR 连通管Container CTNR 罐continue blowdown CTN BLDN 连排continue blowdown flashtank CBFT 连排扩容器Control CTL 控制control box CTL BOX 控制箱Control commmand CTL CMD 控制命令(对调节阀) control room CTL ROOM 控制室converge CNVG 汇流cooler CLR 冷却器cooling CLG 冷却cooling air （blower) fan CLG AIR FAN，CAF 冷却风机corner CRNR 角coupler CPLR 耦合器crevice CRVC 夹层crevice CRVC 间隙current CURT 电流customer valve CV 用户阀cut off the water supply WTR CUT 断水cyclone separator CSEP 细粉分离器cylinder CYL 汽缸cylinder crevice CYL CRVC 汽缸夹层damper DMPR 挡板deaerator DEAE 除氧器decrease DEC 减少dedust transformer DEDUST_XFMR 电除尘变demagnetizer DEMAG 消磁装置Demand DMD 要求Demineralized DEMINE 除盐的Demineralized device DEMINER 除盐装置Density DNSTY 浓度Dewater DWTR 脱水Diaphragm DPHRM 隔膜diesel engine DSL 柴油机differential DIFF 差动differential pressure DP 差压direct current DC 直流dirty DIRTY 脏Dirty oil chamber DTY OC 污油室disappear DSPPR 消失Discharge DISCH 泄放Discharge oil DISCH OIL 放油Discharge steam DISCH STM 放汽discharge water DISCH WTR 放水disconnecting DISCON 断线displace DISP 位移dissolved DSSLV 溶解down DN 下downcomer DNCMR 下降管Draft DRAFT 通风drain tank DRN TK 疏水罐drain water DRN 疏水drain water flashtank DRN FLTK 疏水扩容器drain water to deae DRN—DEAE 疏水至除氧器drain water VLV DRN VLV 疏水阀Dregs DRG 渣drive end DRV_E 驱动端Drum DRUM 汽包Duplicate DUP 复dust transformer DST_XFMR 除灰变Ecentricity ECEN 偏心度EH oil EH OIL, EHO 抗燃油Electric ELEC 电气electric magnetic MAG 电磁electric motor MTR 电机(电动机）electrical work KWh 电度Emergency EMG 紧急Emergency EMG 事故emergency drain water EMG DRN WTR 事故疏水emergency relieve oil valve EMG RLV OIL VLV 紧急放油阀enconomizer ECON 省煤器end END 结束End face END FACE 端energy storage ENERGY_STG 蓄能器equipment EQPMNT 装置exchanger EXCHR 交换器excitation EXCT 励磁excitator EXCTR 励磁机excitator side EXCTR SIDE 励端Exhaust EXH 排风exhaust gas fan EGF 排烟风机Exhaust oil EXH OIL 排油Exhaust steam EXH STM 排汽Exhaust water EXH WTR 排水Exhauster EXHR 排风机expansion EXP 膨胀expansion difference EXP DIFF 胀差explosion vent EXP VENT 防爆门Extend EXTD 伸进extraction steam EXTR 抽汽extraction steam to deaerator EXT_DEAE 抽汽至除氧器failure FAIL 失败fast-closing FAST CLS 速断Fault FAULT，FLT 故障feedback FDB 反馈feedwater FDWTR 给水filter FLTR 过滤器fine treatment FINE TRMT 精处理fire_fighting FGHT 消防firing FIRING 有火first stage 1ST STAGE 第一级Fixed value FV 定值flame FLM 火焰flame intensity FLM INTS 火焰强度flange FLAN 法兰flash tank FLTK 扩容器flow FLW，F 流量flue gas temperature FLUE GAS TEMP 排烟温度force FORCE 强制forced draft air FD 送风forced draft fan FDF 送风机Frequency FREQ 频率front FR 前front / back F/B 前后Fuel FUEL 燃料furnace FRNC 炉膛fusible FUSE 熔断fusible cutout FUSE 熔断器gas GAS 气体gas GAS 烟气gas pass GAS PASS 烟道gas temp GAS TEMP 烟温Gear GEAR 齿轮generator GEN 发电机generator transformer unit GEN XFMR UNIT 发变组governing GVN 可调速的Governing oil GVN OIL 调速油governing valve GVN VLV 调速汽门ground GND 接地Group GP 组guide vane GDVN 导叶H2 cooling pressure up pump H2 CLG PP 氢冷升压泵H2 side H2_S 氢侧H2 supply H2 SPL 供氢header HDR 联箱，集箱header HDR 母管heat steam HEAT STM 加热蒸汽heater HTR 加热器Heating HTG 采暖heavy HEAVY 重High HI,H 高high energy spark ignitor HESI 高能点火器high intermediate pressure cylinder HIPC 高中压缸high level water box HLWB 高位水箱high limit HI_LMT 高限high pressure HP 高压high pressure auxiliary HP_AUX 高辅联箱high pressure cylinder HPC 高压缸high pressure header HPH 高加high speed HI_SPD 高速high temperature HI_TEMP 高温high voltage HV 高电压high voltage standby transformer HVSX 高备变horizontal HORZ 水平（方向）的horizontal vibration HORZ VIB 水平振动hot air HOT AIR 热风hot reheat HOT RHT 热再热hot well HOT WELL 热井humidity HMDT 湿度hydraulic coupler HD_CPLR 液力耦合器hydraulic oil HY_OIL 液压油Hydraulic pressure HY_PRESS 液压hydraulic servomotor HD_MTR 油动机Ignition IGNT 点火Ignitor IGNTR 点火器impedance IMPDC 阻抗increate INC 增加induced draft air IDA 引风induced draft fan IDF 引风机industrial water IND WTR 工业水ingoing line ING LINE 进线inlet INL 入口inlet side INL SIDE 吸入端inner INN 内，内侧，内部inner cylinder INN CYL 内缸interconnection INTRCT 联络interlock LOCK 联锁intermediate pressure IP 中压intermediate pressure cylinder IPC 中压缸intermittent INTMT 定期(排污) intermittent blowdown flash tank IBFT 定期排污扩容器interrogation voltage INT VOLT 问询电压inverse INVS 逆ion ION 离子iron core CORE 铁芯isolate ISLT 隔离isolating platen ISLT PLTN 分隔屏Isolation ISLT 绝缘jacking JACK 顶轴layer LAYER 层Layer A L_A A层leak LEAK 泄漏left LT 左侧level LVL 液位liberty side LBTY SIDE 自由端lift LIFT 支撑lift bearing LIFT BEAR 支撑轴承light LIGHT 轻lighting transformer LIGHTING XFMR 照明变Limit LMT 极限,限Load LOAD 负荷Local LCL 就地lock LOCK 闭锁lock close LOCK CLS 闭锁关lock open LOCK OPN 闭锁开lose magnet LOSE MAG 失磁lose synchronizer LOSE SYN 失步Low LOW，L 低low pressure LP 低压Low voltage LOW VOLT，LV 低电压low frequency LOW FREQ 低频low limit LOW LMT 低限low pressure auxiliary LP_AUX 低辅联箱low pressure cylinder LPC 低压缸low pressure heater LPH 低加low speed LOW SPD 低速low temperature LOW TEMP 低温lower LWR 下层，低层lube LUB 润滑lube oil LUB OIL 润滑油Machine room MCH RM 机房magnet valve MAG VLV 电磁阀Magnetic control meter MCM 磁控表magneto generator MGNT 永励机main MAIN 主Main electric motor MMTR 主电机main plant building M_PLT_BLD 主厂房main steam MAIN STM 主蒸汽main steam stop valve MSSV 主汽门main transformer MAIN XFMR 主变main turbine MAIN TURB 主机maintenance MAINTENACE 检修maintenance transformer NAINTNCE XFMR 检修变make-up oil MK_UP_OIL 补油make-up water MK_UP_WTR 补水Manual MANL 手动master fuel trip MFT 主燃料跳闸match MATCH 满足Maximum MAX 最大maximum continuous revolution MCR 最大持续功率measurement point M_PNT 测点mechanical MCHN 机械mesh MESH 啮合Metal MTL 金属Middle MID 中间，中部Minimum MIN 最小mode MODE 方式Moment of force MOF 力矩monitor MNTR 监视motive power M_PW 动力motor MTR,M 马达motor drive feedwater pump MDFP 电动给水泵Motor drive speed governing oil pump MDSGOP 电动调速油泵motor operated MO 电动motor operated regulating valve MORV 电动调节门motor operated valve MOV 电动门moving blade M_BLD 动叶片natrium NA 钠negative pressure N_PRESS 负压network control room NET CTL ROOM 网控楼network control room transformer NET_CTL_XFMR 网控楼变Neutral point NTRL PNT 中性点Non NON 非non drive end N_DRV_E 非驱动端non symmetry N_SYM 不对称normal NORM 正常Nozzle NOZZLE 火嘴Number NO. 号（量词）O2 O2 氧oil OIL 油Oil box OIL BOX 油箱oil cooler OIL CLR 冷油器oil filter OIL FLTR 滤油器oil pipe OIL PIPE 油路oil pressure OIL PRESS 油压oil pump OIL PMP 油泵oil station OIL STN 油站oil supply OIL SPL 供油oil tank OIL TK 贮油箱oil temperature OIL TEMP 油温Oil value OIL VLU 油量Only ONLY 仅open OPN 开open circulating OPN CIR 开式循环open circulating cooling water OCCW 开式循环冷却水open circulating make up water pump OCMWP 开式循环补充水泵open command OPN_CMD 打开命令opened status OPND 开状态operating power O_PW 工作电源operating transformer OPER_XFMR， OX 工作变压器operation OPR 操作orientation ORT 方向out plant OUT_PLT 厂外outer OUT 外部Outgoing water OUTG WTR 出水outgoing wire OUTG WIRE 出线outlet OUTL 出口outlet side OUTL SIDE 吐出端over current OV CURT 过流over excitator OV EXCTR 过励磁over load OV LOAD 过负荷Over speed OVER SPD 超速over temperature OVER TEMP 超温over voltage OV VOLT 过压overflow OVFL 溢overflow station OVFL STN 溢流站oxygen content O2 CT 氧量pad PAD 瓦（轴承）panel face PNFC 盘面PC level PC LVL 粉位Percent PCT 百分比permit PMT 允许phase PHASE 相phase angle difference PH DIFF 相位差phase lose PH LOSE 缺相phase modifier, phase modulator PH MDFR 调相机pilot PLT 导向pilot bearing PLT BEAR 导向轴承Pilot valve PLT VLV 滑阀Pipe PIP 管，管道Pipe wall PIP WALL 管壁Plant PLANT 厂用plant inner PLNT INN 厂内plant service higher transformer P_H_XFMR 厂高变plant service lower transformer P_L_XFMR 厂低变Plant service power rate PLNT PW RATE 厂用电率plant service transformer P_XFMR 厂变platen fan PLTN FAN 屏风机platen superheat P_SHTR 屏式过热器pneumatic PNMTC 气动Point PNT 点position POS 位置positive + 正的Power PW 功率power on POWER ON 有电Power supply PWR 电源Precipitator PREC 除尘器preheat PHT 预热preheat pipe PHTP 预热管道pressure PRESS，P 压力pressure reducer valve RDPV 减压器(阀) primary air PA 一次风primary air fan PAF 一次风机primary oil PA_O 一次油Probe PROBE 探针programmed control PRG CTL 程控protection PROT 保护Pulse PULSE 脉冲Pulverized coal PC 煤粉pulverized coal conveyor PC_CVR 输粉机pulverized coal exhauster EXHTR 排粉机pulverized coal feeder PC FDR, PCF 给粉机Pulverized-coal system PCS 制粉系统PUMP PMP,P 泵purge PURGE 吹扫purity PURITY 纯度Purity oil chamber PUR OC 净油室push button PB 按钮（键）putting into PUT_IN 投radial / axial RAD / AXI 径向/轴向Radial bearing RAD BEAR 径向轴承rate RATE 率Ratio RATIO 比reactive power R_PW 无功rear platen REAR PLTN 后屏recirculate RECIRC，RCR 再循环recirculating valve RCV， RV 再循环阀rectifier RCTFR 整流器rectifying RCTF 整流的Reduce RDC 减少reference REF 参考regeneration RGEN 再生regeneration device RGEN DEVICE 再生装置regeneration gear pump RGEN GEAR PMP 再生齿轮油泵regulate valve RGL VLV 调节门regulating stage RGL STG 调节级Reheat RHT 再热reheated steam RHT STM 再热蒸汽reheater RHTR 再热器relative expansion RLTV EXP 相对膨胀relay RELAY 继电器release RELSE 释放Remote REMO 遥控remote REMO 远方renew RENEW 重新Reset RST 复位retract RETR 退回，缩回return (oil， water) RTN (OIL, WTR）回（油，水) return air RTN AIR 回送风return fuel fan RFF 回料风机reversal rotation RRT 反转Reversal washing RWG 反冲洗reverse RVS 反向ridding bubble chamber RBCH 消泡箱right RT 右rotating speed RPM 转速rotation ROTN 正转rotor RTR 转子row ROW 排 (量词）rubber ball RBBR BALL 胶球Run RUN 运行run back RB 快速减负荷Running status RUN_ST 运行状态Safety SAFT 安全safety SAFT 保安scanner SCNR 火检score SCORE 比seal oil SEAL OIL 密封油seal water SEAL WTR 密封水Sealing SEAL 密封secondary air SA 二次风secondary air damper SAD 二次风挡板Section SECT 段select, selection SEL 选择Sensor SENSOR 传感器Separator SEPTR 分离器Set SET 设定Shaft SHFT 轴shaft seal SS 轴封shaft seal fan SS FAN 轴封风机shell SHELL 壳体Shockproof SHKPRF 耐震Short circuit SC 短路Side SIDE 侧side A S_A A侧side wall SIDE WALL 侧墙signal SGNL 信号slag remover SLAG REMOVER 出渣机，除渣机Sliding stop pushing bearing SSPB 滑动止推轴承slot SLOT 槽slow down SLOW DN 减速snap SNAP 捕捉器solenoid valve SLNOD VLV 电磁阀soot blow SOOT BLW 吹灰soot blower SOOT BLWR 吹灰器source SRC 源Speed SPD 速度speed governor SPD GVNR 调速器speed up SPD UP 加速spray SPR 喷水Stage STG 级standby STDBY 备用standby power source STDBY PW 备用电源start STRT 启动Start COMmand STRT CMD 启动指令Station STN 站stationary blade S_BLD 静叶片stator STATOR 定子status， state ST 状态Steam STM 汽steam air heater SAH 暖风器steam and water system S_W SYS 汽水系统steam chamber STM ROOM 蒸汽室steam header STM HDR 集汽联箱steam lead pipe STMLP 导汽管steam sealing， steam seal gland SSGLD 汽封steam source STM SRC 汽源steam supply STM SPL 供汽steam temperature STM TEMP 汽温steam—driven oil pump SDOP 汽动油泵step up STEP UP 升压stop command STOP_CMD 停止命令stop status STOP_ST 停止状态storage battery BATTERY 蓄电池Storehouse STOREH 仓superheated SH 过热superheated steam SH STM 过热蒸汽superheater SHTR 过热器surge SURGE 喘震sway SWAY 摆动switch SW 开关Switch SWTH 切换symmetry SYM 对称Synchronizer SYNR 同步器，同操器synchronous SYNCH 同期system SYS 系统T valve T VLV 三通阀tap TAP 抽头temperature TEMP，T 温度temperature and pressure reducer DTPR 减温减压器tertiary air TA 三次风test TEST 检测test TEST 试验the last stage L_STG 末级Throttle THRL 节流throttle THTTL 截止thrust THST 推力thrust bearing TH BEAR 推力轴承tippler TPLR 翻车机to TO 至to indicator TO INDCT 仪(器）用top TOP 顶torsional oscillation TOR_OSC 扭振transformer XFMR 变压器transport TRANS 输送travel TRAVEL 行程treatment TRMT 处理trip TRIP 跳闸turbine TURB 汽机turbine side TURB SIDE 机端turbine—driven feedwater pump TDFP 汽动给水泵turn TURN 匝间turning TRNG 盘车turning room TURN ROOM 转向室two—velocity stage TVS 复速级Ungearing UNGEAR 脱扣unit UNIT 机组up UP 上，上部upper UPP 上层Use USE 用（使用）User USER 用户Vacuum VACUM 真空vacuum break valve VACUM BRK VLV 真空破坏阀vacuum pump VACUM PMP 真空泵valve VLV，V 阀门valve position POS 阀位 / 位置反馈Vent VENT 排空vertical VERT 竖直（方向）的vertical type VERT 立式vibration VIB 振动vice VICE 副voltage VOLT 电压voltage loop VOLT LOOP 电压回路Wall WALL 墙wall temperature WALL TEMP 壁温wash WASH 清洗water WTR 水water box WTR BOX 水箱water collector WTR CLCT 集水箱water curtain WTR CURTAIN 水幕water level WTR LVL 水位Water pump WTR PMP 水泵Water seal WTR SEAL 水封water treatment WTR TRMT 水处理water wall WTR WALL 水冷壁water—supply WTR SPL 上水whole day WHL DAY 全天whole plant WHL PLNT 全厂Windbox WINDBOX 风箱winding WND 绕组working WORK 工作Workshop WORKSHOP 厂房worn out WORN OUT 磨损zero sequence 0_SEQ 零序。

CBREAKER TMAX XT7S 1250 固定三极器，前端接触器和杆式操作机制和固态释放，用于

2
1 piece 280 mm 350 mm 360 mm
11.2 kg
8056221008907
Power Distribution
AC 120 cycles per hour
3000 cycle 240 cycles per hour
10000 cycle 3
1 piece at Rated Operating Conditions per Pole 57 W
XT7S 1250 Ekip Dip LSIG In=1250A 3p F F 1SDA100836R1
8056221008907 XT7S 1250 Ekip Dip LSIG In=1250A 3p F F C.BREAKER TMAX XT7S 1250 FIXED THREE-POLE WITH FRONT TERMINALS AND LEVER OPERATING MECHANISM AND SOLID-STATE RELEASE IN AC EKIP DIP LSIG R 1250
Ordering
EAN Minimum Order Quantity Customs Tariff Number
Dimensions
Product Net Width Product Net Height Product Net Depth / Length Product Net Weight
Container Information
PRODUCT-DETAILS
XT7S 1250 Ekip Dip LSIG In=1250A 3p F F XT7S 1250 Ekip Dip LSIG In=1250A 3p F F
General Information

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

121737-0326, Rev. E6-21-2002FeaturesCompliant with IEEE 802.3z Gigabit Ethernet1000BASE-LX PMD specifications Distance options of 10 km, 25 km, 40 km and 70 kmusing DFB lasers also available Eye Safe (Class I Laser Safety)Excellent EMI & ESD protection (optional extra EMIshield also available) Multi-sourced 10-pin (2x5) SFF (Small Form Factor)package style -40 °C to +85 °C Operating Temperature (“A” option) Duplex LC optical connector interfaceSingle +3.3 V supply & LV-PECL DATA interface(AC coupling option also available) LV-TTL TX DISABLE input & RX SIGNAL DETECToutputThe DTR-1250-SM-LC and DTR-1250-SM-LS fiber optic transceivers offer a simple and convenient way to interface 1000BASE-LX Gigabit Ethernet boards running at 1.25 Gbaud to single mode and multimode fiber optic cables. In addition to option “L2” for the 5 km distance specified in IEEE 802.3z standard, five other options with longer distance capability with single mode fibers are offered. In option “L1”, a 1300 nm Fabry Perot laser with higher power and narrower spectral width and center wavelength range is used to increase the distance to at least 10 km. In option “L0”, an even higher power 1300 nm Fabry Perot laser is used to offer more optical power budget. In option “H3”, a 1300 nm DFB laser and a high sensitivity receiver are used to increase the distance to over 25 km or 30 km (assuming worst case fiber loss of 0.4 dB/km and 0.35 dB/km respectively). In option “H5”, a 1550 nm DFB laser and a high sensitivity receiver are used to increase the distance to over 35 km or 40 km (assuming worst case fiber loss of 0.3 and 0.25 dB/km respectively).Finally, in option “H7”, a high power 1550 nm DFB laser andan ultra high sensitivity receiver are used to increase the distance to 70 km (assuming fiber loss of 0.2 to 0.25 dB/km). All modules satisfy Class I Laser Safety requirements in accordance with the US FDA/CDRH and international IEC-825 standards.The transmit and receive functions are contained in a narrow width two-row, 10-pin (2x5) package with a Duplex LC connector interface. The receptacle fits into an RJ-45 form factor outline.The 10-pin configuration is in conformance to a Small Form Factor (SFF) multisource agreement.The transmitter and receiver DATA interface are differential direct-coupled LV-PECL. An alternate version with A C coupling interface is also available. An LV-TTL Transmitter Disable control input is provided. The receiver Signal Detect output interface is also LV-TTL.The transceiver operates from a single +3.3V power supply over an operating temperature range of -5 °C to +70 °C and -40 °C to +85 °C (“A” option). The package is made of metal for excellent EMI shielding.DescriptionOptical Communication Products, Inc.Absolute Maximum Ratings©ParameterSymbol Minimum Maximum Units Storage Temperature T st- 40+ 85°C Operating Case Temperature "A" option T op - 40+ 85°C "Blank" option- 5.0+ 70Supply Voltage V CC - 0.5+ 6.0V Input Voltage V in - 0.5V CC V Output CurrentI O -50mALead Soldering Temperature & Time--260°C, 10 sec221737-0326, Rev. E 6-21-2002Transmitter Electrical Interface (over Operating Case Temperature Range)Receiver Electrical Interface (over Operating Case Temperature Range)Electrical Power Supply Characteristics (over Operating Case Temperature Range)DATA interface (DC-coupled modules):The interface circuit for standard DC-coupled modules with direct-coupled LV-PECL interface is shown in Fig. 1. The Transmitter input has internal 50 ohm termination.DATA interface (AC-coupled modules):For modules with AC coupling option, both transmitter and receiver interface has internal bias, termination and AC coupling capacitor.The transmitter can be connected directly to the driving SERDES as shown in Fig. 2. The receiver can be connected directly to the external 50 ohm loads (termination resistor of the SERDES). For best performance, both DATA+ & DATA- should be used.TX DISABLE : The transmitter is normally enabled (i.e. when the TX DISABLE control input is not connected or at LV-TTL logic LOW). When the TX DISABLE voltage is higher than V CC - 1.3 V, the laser is turned off independent of the input data.SIGNAL DETECT: The Signal Detect circuit monitors the level of the incoming optical signal and generates a logic LOW signal when insufficient photocurrent is produced. Its output is LV-TTL with no termination required.Application NotesDTR-1250-SM-LC/LSParameterSymbol Minimum Typical Maximum Units Input HIGH Voltage 1V IH V CC - 1.165-V CC - 0.700V Input LOW Voltage 1V IL V CC - 1.950-V CC - 1.475V Transmitter Disable Voltage V DIS V CC - 1.3-V CC V Transmitter Enable VoltageV EN-0.8V1For AC-coupled modules, the input voltage swing is 0.25 V minimum and 1.2 V maximum single-ended.ParameterSymbol Minimum Typical Maximum Units Output HIGH Voltage (LV-PECL) 1,2V OH V CC - 1.10-V CC - 0.90V Output LOW Voltage (LV-PECL) 1,2V OL V CC - 1.84-V CC - 1.60VOutput HIGH Voltage (LV-TTL)V OH 2.4-V CC Output LOW Voltage (LV-TTL)V OL-0.8Output CurrentI O --25mA 1With 50 ohm terminated to V CC - 2 volt (for DC-coupled modules).2For AC-coupled modules, the output voltage swing into 50-ohm load is 0.3 V minimum and 1 V maximum single-ended.ParameterSymbol Minimum Typical Maximum Units Supply Voltage V CC 3.13 3.3 3.47V Supply Current 1DC-coupled module I CC -150220mA AC-coupled moduleI CC-175245mA1Supply current does not include termination.321737-0326, Rev. E6-21-2002Transmitter Performance Characteristics (over Operating Case Temperature, V CC = 3.13 to 3.47 V)Receiver Performance Characteristics (over Operating CaseTemperature, V CC = 3.13 to 3.47 V)DTR-1250-SM-LC/LSPower supply and grounding : The power supply line should be well-filtered. All 0.1 µF power supply bypass capacitors should be as close to the DTR transceiver module as possible.The two front GND posts (mounting studs) should be grounded to Chassis Ground for best EMI and ESD protection.If Chassis Ground is not available, they should be tied to Circuit Ground.Transmission distance: The transmission distances indicated for the H3, H5 and H7 modules with DFB laser options are guidelines only, not guaranteed. The exact distance is dependent on the particular fiber loss involved and can be calculated from the optical loss budget.ParameterSymbol Minimum Typical Maximum Units Data RateB100012501300Mb/s Minimum Input Optical Power (10-12 BER) 1L2, L1, L0P min - 20.0--dBm H3, H5- 21.0--H7- 23.0--Maximum Input Optical Power (10-12 BER) 1P max- 3.0--dBm Signal Detect ThresholdsIncreasing Light InputL2, L1, L0P sd+-- - 20.0dBm H3, H5-- - 21.0H7-- - 23.0Decreasing Light InputP sd-- 30.0--dBm Signal Detect Hysteresis -0.5--dB Deterministic Jitter DJ --170ps Random JitterRJ --96ps Wavelength of Operation λ1100-1600nm Return Loss-12--dB Electrical 3 dB upper cutoff frequency ---1500MHzStressed Receiver Sensitivitycompliant with IEEE 802.3z standard1Measured with 27-1 PRBS at 1250 Mb/s at 1300 nm wavelength.ParameterSymbol MinimumTypicalMaximumUnitsData RateB12512501300Mb/sOptical Output Power 1L2P o - 11.0-- 3.0dBm L1- 9.0-- 3.0L0- 5.0-0H3, H5- 4.0- 1.0H7- 3.0- 2.0Center Wavelength L2λc 127013101355nm L1, L0 (-5°C to 70°C)128513101345L1, L0 (-40°C to 85°C)127413101360H3128013101335H5, H7148015501580Spectral Width (RMS) 1L2∆λRMS -- 4.0nmL1, L0-- 2.5Spectral Width (-20 dB)H3, H5, H7∆λ20-- 1.0Extinction Ratio P hi / P lo 9--dB Deterministic Jitter DJ --80ps Random Jitter RJ --147ps Relative Intensity Noise RIN --- 120dB/HzTransmitter Output Eye compliant with Eye Mask Defined in IEEE 802.3z standard 1Measured average power coupled into single mode fiber (SMF). For 50 µm or 62.5 µm multimode fiber (MMF) operation, the output power is 0.5 dB less and is measured after a single mode fiber offset-launch mode-conditioning patch cord as specified in IEEE 802.3z.421737-0326, Rev. E 6-21-20021. Default tolerance for all dimensions given in inches (Unless otherwise noted) .xxx = +0.005 .xx = +0.012. x, y: see Pin length option table in ordering informationNotes:521737-0326, Rev. E6-21-2002Pin AssignmentsPIN FUNCTION1RX GND 2V CC RX3SD (RX SIGNAL DETECT)4RD- (RX DATA OUT -)5RD+ (RX DATA OUT +)6V CC TX 7TX GND 8TX DISABLE 9TD+ (TX DATA IN +)10TD- (TX DATA IN -)Optical Communication Products, Inc. reserves the right to make changes in equipment design or specifications without notice. Information supplied by Optical Communication Products, Inc. is believed to be accurate and reliable. However, no responsibility is assumed by Optical Communication Products, Inc. for its use nor for any infringements of third parties which may result from its use. No license is granted by implication or otherwise under any patent right of Optical Communication Products, Inc.Optical Communication Products, Inc.20961 Knapp Street, Chatsworth, CA 91311, Tel.: 818-701-0164, FAX: 818-701-1468, DTR-1250-SM-LC/LSOptical Communication Products, Inc.DATE OF MANUFACTURE:MANUFACTURED IN THE USA This product complies with 21 CFR 1040.10 and 1040.11Meets Class I Laser Safety RequirementsLaser Safety : All transmitters are Class I Laser products per FDA/CDRH and IEC-825 standards. They must be operated under specified operating conditions.21737-0326, Rev. E 6-21-2002ContentsDescription (1)Absolute Maximum Ratings (1)Transmitter Electrical Interface (over Operating Case Temperature Range) (2)Receiver Electrical Interface (over Operating Case Temperature Range) (2)Electrical Power Supply Characteristics (over Operating Case Temperature Range) (2)Application Notes (2)Transmitter Performance Characteristics (over Operating Case Temperature) (3)Receiver Performance Characteristics (over Operating CaseTemperature) (3)Package without EMI shield (LC) (4)Package with EMI Shield (LS) (4)Ordering Information (5)6。