漏电断路器产品述

注册商标(Trade Mark):
本企业在此郑重声明:上述申证产品所使用的型号和商标保证严格遵守国家有关法律法规和政府部门的有关规定。如有乱用、冒用其他企业产品的型号和商标导致侵权行为，本企业将对其后果承担全部法律责任。
本企业对提供所有与认证有关资料的真实性负责。如果本企业获证的产品有所变更，将及时提交产品变更报告，否则由此引起任何事情由本企业将承担全部责任。
特性(Characteristic):
1)极数(Number of poles):
2)电流种类(AC或DC) (Kind of current:: AC or DC):
3)主电路额定值(Rated Value of Main Circuit):
额定工作电压(Rated operational voltageUe)(V):
相极(Phase pole)中性极(Neutral pole)
额定频率(Rated Frequency)(Hz):
额定运行短路分断能力Ics(kA):
额定极限短路分断能力Icu(kA):
额定短时耐受电流Icw(kA/s):
4)控制电路(Control Circuits)
电动操作机构(ElectricOperator)
额定频率(Rated Frequency)(Hz):
5)辅助电路(Auxiliary Circuits)
种类和对数(Kind of contact elements and number of auxiliary circuits):
约定发热电流(Conventionalfree airthermal current Ith)(A):
额定绝缘电压(Rated insulation voltageUi)(V):
额定冲击耐受电压(Rated impulsewithstand voltageUimp)(kV):
额定限制短路电流配合SCPD型号(Type of SCPD forRated Conditional Short-circuit Current):
3）主要结构数据(Main constructional parameter):
(1).触头系统(Contact System)
触头参数(Contactparameter):开距(Contactgap)
终压力(terminal pressure)超程(Over travel)
触头尺寸(ContactDimension):
Herein we solemnly declare: all the above-mentioned model types and trademarks are in strict compliance with relevant national laws, stipulations and governmental regulations. We are clear that any abuse or misuse of other manufacturers’ model types and trademarks will be treated as an infringement act and in case of such an act, we will assume all legal responsibilities.
申证企业负责人(签名):
Applicant’s representative (signature)
日期(Date):
(企业盖章)
(Applicant’s seal here)
产品描述
(Product Description)
1.产品构成的描述及结构特点（结构概要说明）：
Product’s composition and construction characteristics (brief description of the construction):
申证企业负责人(签名):
Applicant’s representative (signature)
日期(Date):
(企业盖章)
(Applicant’s seal here)
企业自我声明2
(Applicant Declaration 2)
企业名称(Applicant):
申证产品名称、型号规格(Product Name andModel/Type):
镀层材料及厚度(CoatingMaterialand its Thickness)
硬度(Hardness)
产品描述
(Product Description)
2.主要技术参数(Main technical Parameter):(如不适用项用“/”表示if not applicable, filled with“/”)
包括产品的主要组成部件,操作方式,安装方式,接线方式等，还包括以下内容：
Including main parts of the product, means of operation, installation and wiring, and etc., and also the following information:
断路器附件(辅助、报警、欠压、分励、电动操作机构和旋转操作手柄等)
(Circuit-breaker Accessories (Auxiliary, Alarm, Undervoltage, Shunt,ElectricOperator, Rotaryoperating handle, and etc.)):
永久磁钢材料名称及牌号
(Permanent Magnetic Steel:MaterialName/Serial number)
(3).机构(Mechanism)
跳扣、锁扣和再扣零件为金属零件时(When theLatched device, tripping deviceand re-tripping deviceare metal parts):
额定绝缘电压(Rated insulation voltageUi)(V):
额定冲击耐受电压(Rated impulsewithstand voltageUimp)(kV):
额定控制电源电压(Rated control supply voltage Us)(V):
电流种类(AC或DC)(Kind of current:: AC or DC):
申请CCC强制认证产品描述
(低压电器类)
Product Description ForChinaCompulsory Certification
(Low-voltage Products)
申请编号(Application No.)
申请人(Applicant)
地址(AddressofApplicant)
工厂编号(Factory Code)
生产厂(Factory)
地址(AddressofFactory)
产品名称(Name of Product)
具有剩余电流保护的断路器(CBR)
型号(Model/Type)
申请单位(印章)
Applicant’s seal here
企业自我声明1
(Applicant Declaration 1)
分类(Classification):
1）使用类别(A或B)(Utilization Category: A or B):
2）是否具有隔离功能(Suitability for insulation):
3）安装方式(固定式、插入式、抽屉式)
(Method of installation: Fixed, Plug-in, Withdrawable):
热双金属片式:热双金属材料型号及规格
(Thermostatic BimetalType: Material,Model/Specification)
加热元件材料型号及规格
(HeatingElement: Material,Model/Specification)
电子式和智能化过电流脱扣器:执行机构磁轭铁心材料名称及牌号(Electronic/ Intelligentover-current release:MagneticYokeCore of Actuator: MaterialName/Serial number)
总装配图(General assemblydrawing):
电气原理图(ElectricalSchematic diagram):(包括元件明细表Including the components list)(适用于电子式和智能化过电流脱扣器Applicable for Electronic/ Intelligentover-current release)
静触头(Fixed contact)动触头(Moving contact)
(2).过电流脱扣器(Over-current Release)
过电流脱扣器型式(热磁式、液压电磁式、电子式或智能化脱扣器等)(Over-current Release Type(Thermal Magnetic/HydraulicPressureElectro-magnetic/Electronic/ Intelligent, and etc.))
本企业在此郑重声明:本次申请中，我单位向指定检测机构提供的型号/规格为
的(产品名称)是由
(生产厂名称)于(生产厂地址)
完成最终装配和出厂检验。
本企业对提以上情况的真实性负责，否则由此引起任何事情由本企业将承担全部责任。
Herein we solemnly declare that the final assemble and routine tests of ________________ (product name) under ____________ (model type and specification)within this application are done by _______________ (factory name)locatedat_________________________________ (factory address).We guarantee theauthenticity ofthe above declaration; otherwise we are willing to assume any possible consequences.