PME - PMI - PMA 应用手册说明书
合集下载
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Potentiometer body
2 corrugated washers must be fitted together in order to inhibit axial movements of the cursor and to allow the cursor to rotate in relation to the piston rod. Optional supply Code MIM522 (PMI)
Flange
Flange fixing screws
Fixing bracket
Cursor
EXAMPLES OF PMI APPLICATIONS (Not binding) and PMI Slim Typical PMI assembly, inside hydraulic cylinders with 250 bar maximum working pressure.
DTS_APPL_PMx_0308mbly, with slide type cursor drag
Fixing bracket
Fixing screws
Cylinder shaft Potentiometer body Fixing screws Cursor
Max. 20 bar pressure
CURSOR PCUR031
3 pole cable
GEFRAN spa reserves the right to make aesthetic and/or functional changes at any time and without notice.
GEFRAN spa via Sebina, 74 25050 PROVAGLIO D’ISEO (BS) - ITALIA tel. 0309888.1 - fax. 0309839063 Internet:
Slot in cylinder shaft; for fitting the cursor, corrugated washer and snap ring (See Note "E")
Max. pressure 250 bar, 400 bar peaks
PMA POTENTIOMETER
Cylinder shaft
PME - PMI - PMA application Manual
RECTILINEAR DISPLACEMENT TRANSDUCERS WITH MAGNETIC DRAG
EXAMPLES OF PME APPLICATIONS (Not binding)
Typical PME assembly, inside pneumatic cylinders with 20 bar maximum working pressure.
Cursor
Snap ring Optional supply Code MIM024 (PMI)
Recommended O Ring seal: OR3081 NBR-90 (PMI)
Assembly procedure 1) Fix the cursor to the piston 2) Move the potentiometer until it "engages" the cursor inside 3) Fix the PMI potentiometer to the piston
2 corrugated washers must be fitted together in order to inhibit axial movements of the cursor and to allow the cursor to rotate in relation to the piston rod. Optional supply Code MIM522 (PMI)
Flange
Flange fixing screws
Fixing bracket
Cursor
EXAMPLES OF PMI APPLICATIONS (Not binding) and PMI Slim Typical PMI assembly, inside hydraulic cylinders with 250 bar maximum working pressure.
DTS_APPL_PMx_0308mbly, with slide type cursor drag
Fixing bracket
Fixing screws
Cylinder shaft Potentiometer body Fixing screws Cursor
Max. 20 bar pressure
CURSOR PCUR031
3 pole cable
GEFRAN spa reserves the right to make aesthetic and/or functional changes at any time and without notice.
GEFRAN spa via Sebina, 74 25050 PROVAGLIO D’ISEO (BS) - ITALIA tel. 0309888.1 - fax. 0309839063 Internet:
Slot in cylinder shaft; for fitting the cursor, corrugated washer and snap ring (See Note "E")
Max. pressure 250 bar, 400 bar peaks
PMA POTENTIOMETER
Cylinder shaft
PME - PMI - PMA application Manual
RECTILINEAR DISPLACEMENT TRANSDUCERS WITH MAGNETIC DRAG
EXAMPLES OF PME APPLICATIONS (Not binding)
Typical PME assembly, inside pneumatic cylinders with 20 bar maximum working pressure.
Cursor
Snap ring Optional supply Code MIM024 (PMI)
Recommended O Ring seal: OR3081 NBR-90 (PMI)
Assembly procedure 1) Fix the cursor to the piston 2) Move the potentiometer until it "engages" the cursor inside 3) Fix the PMI potentiometer to the piston