RHA说明书
HyRAV Flex Series和SG Series产品说明书
The Power Behind The Part.Valve ActuatorHyRAV ® Flex Series | SG SeriesIndex .......................................................1HyRAV ® Series ................................................2 Valve Actuator Overview .......................................2 Technical Data ..............................................3HyRAV ® Flex Series .............................................4HyRAV ® SG Series ..............................................5The IC Difference . (6)CONTENTSIndex1IndexThe compact and concentric design of the HyRAV ® hydraulic valve actuators utilize the helical gear principle. Reliable and powerful, the HyRAV ® series provides a safe solution that is easily adaptable to all valves even in the most severe conditions.single acting spring return fail-safedouble actingNamed the Flex after its many options, this HyRAV ® Series is highly customizable in many facets including control boxes, valve blocks, and more.HyRAV® FlexThe HyRAV ® SG, or SecondGeneration, is the standard valve actuator model offered by Eckart offering a compact, safe solution.HyRAV® SGValve Actuator Overview 2HyRAV® SeriesValve Actuator OverviewMore powerful, compact, safer•15 actuator sizes•Torques up to 2,210,000 in-lbs (250,000 Nm) at 3,045 psi (210 bar)•Through the concentric design, no radial forces are transmitted to the valve•Optimum cushioning protects the valve and actuator •Easy installation and adjustment to each valve •Maintenance free — no lubrication required •Suitable for on/off, control, and fail-safe operation •High repeat accuracy and very simple control of the ow rates•Very fast rotation speed (i.e., 90° in 0.2 sec) •Robust against extreme environmental conditions •Compact size with high torque output •Durable against vibrations•Designed to operate at 3,045 psi (210 bar) which provides more torque in a smaller actuator compared to actuators operating at 1,950 psi (135 bar)Advantages at a GlanceSeries TypesPower plants (coal, gas, oil, nuclear)Hydroelectric power plantsGeothermal power plants Solar thermal power plants Biogas power plants Exploration, offshoreRefineries Pipelines Tank farmsSteel hydraulics constructionWater treatment plants Seage treatment plants Drinking water distribution Shipbuilding & SubmarinesChemical / Pharmaceutical industryFood industryAir conditioningSteel millsIndustrial &Special SolutionsApplicationsIndustriesWaterPowerOil & GasMin. Operating Pressure Required 5 to 10 bar / 10 to 145 psiAngle of Rotation Quarter turn / 0-90°, 120°, or 180°+Position of Accuracy < 0.5° of full scaleMediumStandard hydraulic oil: mineral oil of groupAmbient Temperature -25 to +70°C / -13 to +158°F Protection Class IP68Valve Attachment Flange EN ISO 5211Double Acting Lifetime>100,000 operationsSingle Acting Lifetime (Fail-Safe)Dependent on the desired spring package Duty RatingS1 – 100%Operating Time Range 0.5 sec. to 200 sec.Max. Speed Fail-Safe As fast as 0.1 seconds(Dependent on the valve actuator size)Certificates/Approvals ATEX, SIL2/3, further inprocessing/planning, and as–required Materials, Standard Steel, GGG Seal Material, StandardPU / NBRHelical gear — double acting or single acting (spring return)210 bar / 3,000 psi Technical Data (Standard — Others on Request)Max. Allowable Operating PressureValve Actuator Type HyRAV ® Series3HyRAV® SeriesTechnical DataHyRAV ® FlexTechnical DataApplicationsHyRAV ® actuators can be customized to your application with seals, materials, and design modi cations.Inquire with our engineering team how we can support your requirements.Single ActingDouble Acting• Electrical / VisualPosition Indication • Manual Operation • Valve Blocks• HPU (Power Units)TypesOptionsHyRAV® Flex SeriesTechnical DataHyRAV ® Flex Series 4Technical DataModelsConnection KitTorquein-lbs (Nm) at 1,095 psi[135 bar]+0.002+0.052+0.005+0.130-0.000-0.000-0.000-0.000+0.002+0.062+0.005+0.130-0.000-0.000-0.000-0.000+0.002+0.062+0.006+0.160-0.000-0.000-0.000-0.000+0.002+0.074+0.006+0.160-0.000-0.000-0.000-0.000+0.002+0.074+0.007+0.190-0.000-0.000-0.000-0.000+0.002+0.074+0.007+0.190-0.000-0.000-0.000-0.000+0.003+0.087+0.007+0.190-0.000-0.000-0.000-0.000+0.003+0.087+0.007+0.190-0.000-0.000-0.000-0.000+0.003+0.087+0.008+0.220-0.000-0.000-0.000-0.000+0.003+0.100+0.008+0.220-0.000-0.000-0.000-0.000+0.003+0.100+0.009+0.250-0.000-0.000-0.000-0.000+0.003+0.100+0.009+0.250-0.000-0.000-0.000-0.000+0.003+0.100+0.009+0.250-0.000-0.000-0.000-0.000+0.003+0.100+0.009+0.250-0.000-0.000-0.000-0.000+0.003+0.100+0.009+0.250-0.000-0.000-0.000-0.0004,409(2,000)2003,306(1,500)AS250F602,210,000 (250,000)F48 – F6011.0232808.6612207.0861802,425(1,100)AS185F601,640,000 (185,000)F48 – F609.8422507.874AS125F481,110,000 (125,000)F40 – F488.661220AS100F48885,000 (100,000)F40 – F487.874200 6.4961651,984(900)AS063F40557,500 (63,000)F35 – F40 – F48 6.496165 5.118130 1.278(580)3.937100771(350)AS032F35283,200 (32,000)F30 – F35 – F40 5.118130 4.527AS024F35212,410 (24,000)F30 – F35 – F40 4.527115115992(450)AS016F30141,600 (16,000)F25 – F30 – F35 3.85898 2.95275440(200)AS012F30141,600 (16,000)F25 – F30 – F35 3.34685 2.75570352(160)2.165551,212(550)AS008F2570,900 (8,000)F16 – F25 – F30 2.83472 2.165AS006 sa F2553,100 (6,000)F16 – F25 – F25 2.8347255253(115)AS004F1635,400 (4,000)F14 – F16 – F25 2.36260 1.81146121(55)AS002F1417,700 (2,000)F12 – F14 – F16 1.88948 1.4173699 (45)AS001F128,850 (1,000)F10 – F12 – F14 1.41736 1.0622766 (30)AS000F104,420 (500)F07 – F10 – F12 1.102280.8662244(20)HyRAV® FlexHyRAV ® TypeValve Attachment Flange EN ISO 5211Hollow Shaft With Feather Keys (S)Hollow Shaft With Square (S)lbs (kg)Standard PossibleMax. Diameter Max. Sizein. (H9)mm (H9) in. (H11)mm (H11)Single ActingDouble ActingTypesHyRAV® SG SeriesTechnical DataHyRAV ® SG Series5Technical DataModelsConnection Kitin-lbs (Nm) at 1,095 psi [135 bar]in-lbs (Nm) at 3,045 psi[210 bar]+0.002+0.052+0.005+0.130-0.000-0.000-0.000-0.000+0.002+0.062+0.005+0.130-0.000-0.000-0.000-0.000+0.002+0.062+0.006+0.160-0.000-0.000-0.000-0.000+0.002+0.074+0.006+0.160-0.000-0.000-0.000-0.000SG 500F127,080 (800)F07 – F10 – F12Standard PossibleHyRAV ® TypeSG 250F103,540 (400)F05 – F07 – F10SG 125TBD 1,770 (200)TBD Valve Attachment Flange EN ISO 521192(42)8,850 (1,000)351.653421.377361.1813061(28)37 (17)SG 1000F1414,160 (1,600)F10 – F12 – F1450SG 2000F1626,550 (3,000)F12 – F14 – F161.9682.204561.41717,700 (2,000)HyRAV® SGTorqueHollow Shaft With Feather Keys (S)lbs (kg)Hollow Shaft With Square (S)Max. Diameterin. (H9)Max. Sizein. (H11)mm (H11)mm (H9)22 (10)1,150 (130)2,210 (250)4,420 (500)11.7(5.3)TBDTBD0.9440.9842524The IC Di erenceThe Power Behind the PartThe IC Difference6IC-Fluid Power, Inc. helps companies achieve sourcing excellence through a range of services including engineering and hydraulic component design, outsourcing partner selection and transition, strategic implementation and support, andlogistics management. We help provide sourcing strategies for organizations looking to expand their current scope for sourcing hydraulic components.We help engineers, purchasing departments and project managers source the worldfor hydraulic components without the need to invest signi cant time and resources developing an internal sourcing team, learning languages and cultures and establishing the direct relationships necessary to be successful. O ur experienced freight brokers ensure that freight moves quickly through customs and is delivered to your location on time, giving you peace of mind. IC-Fluid provides you with the solution, without the hassle.Our Broad In-House Capabilites:• Multi-lingual staff • Deep product knowledge • Experienced freight brokers •Factory authorized and trainedrepairs• Highly customized hydraulic systems • Product demonstrations • Project management • Replacement parts•Technical expertise and supportOur Industries:• Aerospace • Agriculture • Construction• Energy • Entertainment• Marine &Offshore• Material Handling• Metals • Military • Mining • Packaging • Plastics & Injection Molding • Transportation • Waste-Management Connecting you to world-class quality hydraulic componentsHyRAV Valve Actuator Catalog v2 / June 23www.ic +1.419.661.8811 Tel +1.419.661.8844 Faxus@ic https:// 713.592.0869 Tel ****************IC-Fluid Power, Inc.63 Dixie Hwy Rossford, OH 43460Distrubition Partner: ValvACT, Inc. 5904 Jessamine St., Suite A-18Houston, TX 77081。
人胎球蛋白A
人胎球蛋白A（FETU-A）定量检测试剂盒（ELISA）使用说明书本试剂盒只能用于科学研究，不得用于医学诊断。
人胎球蛋白A（FETU-A）定量检测试剂盒（ELISA）使用说明书【试剂盒名称】人胎球蛋白A（FETU-A）定量检测试剂盒（ELISA）【试剂盒用途】定量检测人血清、血浆及相关液体样本中胎球蛋白A（FETU-A）的含量。
【检测原理】本试剂盒采用双抗体两步夹心酶联免疫吸附法（ELISA）。
将标准品、待测样本加入到预先包被人胎球蛋白A（FETU-A）单克隆抗体透明酶标包被板中，温育足够时间后，洗涤除去未结合的成分，再加入酶标工作液，温育足够时间后，洗涤除去未结合的成分。
依次加入底物A、B，底物（TMB）在辣根过氧化物酶（HRP）催化下转化为蓝色产物，在酸的作用下变成黄色，颜色的深浅与样品中人胎球蛋白A（FETU-A）浓度呈正相关，450n m 波长下测定OD 值，根据标准品和样品的OD 值，计算样本中人胎球蛋白A（FETU-A）含量。
【试剂盒组成】1 酶标包被板12 孔×8 条7 显色剂A 液6mL2 标准品0.3mL×6 管8 显色剂B 液6mL3 20 倍浓缩洗涤液25mL 9 终止液6mL4 样本稀释液6mL 10 说明书1 份5 特殊稀释液6mL 11 封板膜2 张6 酶标试剂6mL 12 密封袋1 个备注：标准品（1 号→6 号）浓度依次为：640、320、160、80、40、20 μg/ mL.【需要而未提供的试剂和器材】1、37℃恒温箱2、标准规格酶标仪3、精密移液器及一次性吸头4、蒸馏水5、一次性试管6、吸水纸【操作步骤】1、准备：从冰箱取出试剂盒，室温复温平衡30 分钟。
2、配液：用蒸馏水将20 倍浓缩洗涤液稀释成原倍的洗涤液。
3、加标准品和待测样本：取足够数量的酶标包被板，固定于框架上，分别设置标准品孔、待测样本孔和空白对照孔，记录各孔位置，在标准品孔中加入标准品50μL；待测样本孔中先加入待测样本10μL，再加样本稀释液40μL（即样本稀释5 倍）；空白对照孔不加。
阿尔法拉維扁縱條熱交換器產品說明書说明书
High energy savings,low lifetime costsAlfa Laval spiral designs provide thermal efficiency 2-3 times that of comparable shell-and-tube heat exchangers. They can therefore recover much more waste heat, creating huge potential for increased energy savings. Lower fuel costs combined with reduced emissions offer a smart way to improve the sustainability of your processes and your profitability.At the same time, a compact design reduces installation and materials costs, while simplified service shrinks your annual maintenance budget. This is why you can expect a short payback time as well as low total cost of ownership. SpiralPro will never foul upFor processes involving fouling fluids,sludges, emulsions, slurries, fibres orparticle loaded liquids, nothing beatsthe reliability of Alfa Laval SpiralProheat exchangers. The SelfClean™design resists fouling and clogging withdirty media that cause problems forany other type of heat exchanger.Maximum uptime and easy cleanabilitydramatically reduces operationalexpenses and simultaneously boostsproduction capacity.SpiralPro heat exchangers can beconfigured for liquid-to-liquid duties oras steam heaters.SpiralCond: the ideal solution forvacuum condensingSpiralCond heat exchangers are a highlyefficient solution for two-phase duties,with a compact, vertical configurationthat offers a much smaller footprint thanequivalent shell-and-tube heat exchang-ers. Each SpiralCond is fully customizedto the required duty, with channelspacings adjusted to provide the lowestpressure drop. They are therefore ideallysuited to challenging vacuum condens-ing and evaporation duties.SpiralCond heat exchangers can beinstalled onto existing process columnsor delivered as a stacked column forapplications involving multiple coolingmedia.Improving sustainability with spiral heat exchangersAlfa Laval’s range of welded spiral heat exchangers offer a robust andreliable option for demanding liquid-to-liquid and two-phase duties,with surprisingly low maintenance requirements. With over 80,000 unitsdelivered to support applications across all parts of the hydrocarbonchain, wastewater, mining and much more, they are a well-provensolution when other types of heat exchangers just don’t cut it.SpiralProfor liquid-to-liquid dutiesSpiralCondfor vacuum condensingand evaporation dutiesSpiralProfor steam heater dutiesSpiralCondin stack configurationBenefits to solve tough problemsSpiralProSpiralCondAvailable for liquid-to-liquid or steam heater dutiesSuitable for vacuum condensation or evaporation dutiesCan be configured onto existing processcolumns or delivered as a stacked column for applications involving multiple cooling mediaDesign temperature:−100°C (−148°F) to 400°C (752°F)Design temperature:−100°C (−148°F) to 400°C (752°F)Design pressure:Full vacuum to 100 barg (1,450 psig)Design pressure:Full vacuum to 100 barg (1,450 psig)Diff. pressure: Up to 50 bargDiff. pressure: Up to 50 bargMaximum heat transfer area: 900 m 2 (9,688 ft 2)Maximum heat transfer area:2,500 m 2 (26,910 ft 2) (for stacked columns)•Improved heat recovery translates to significant energy savings, along with reduced fossil fuel consumption and CO 2 emissions•Low installation and operational expenses, along with improved energy efficiency, result in short payback times•Virtually no fouling or clogging in duties involving very dirty, highly viscous or particulate media•Easy-to-open design makes cleaning quick and simple, ensuring low maintenance costs •Reduced pipework and steel structures means lower installation costs.Alfa Laval is the only supplier that has been developing spiral heat exchangers for more than a half-century. Our extensive experience in welded heat transfer technology means that our SpiralPro and SpiralCond models offer benefits that you simply cannot find on other types of heat exchangers:For more product information, visit /spiralsUnique featuresCompared to other heat exchangers used in similar applications, Alfa Laval spiral designs offer a more compact footprint withincreased thermal efficiency. They are also built with unique features that ensure the most reliable performance:Relevant industries for Alfa Laval spiral heat exchangers include:• Petrochemical • Refinery •Steel making • Pulp and paper• Mineral processing (metals, ore) •Wastewater treatment (municipal and industrial) •Pharmaceutical • Vegetable oil refining •Natural gas processingSelfClean™Superior cleaning and extended performanceA single channel for each fluid ensures reliable self-cleaning of the unit.RollWeld™Automated, reliable channel enclosureAn automated bending and welding process for the closure of each channel ensures consistent quality and reliability.HighP™A custom solution for high-pressure dutiesCircular shell design and a self-support-ing internal coil improves mechanical strength under high pressure.ALOnsite™Qualified support at your facilityTrue onsite service by skilled engineers, anywhere in the world.Fouling is a thing of the pastThe SelfClean™ design makes Alfa Laval SpiralPro heat exchangers the ultimate problem solvers for use with media that foul or clog other types of heat exchangers. The continuously curving, single-channel geometry creates high turbulence to minimize fouling from the start. If fouling does start to occur, local velocity increases, since the entire flow must still pass through the channel. This creates a scrubbing effect that flushes away any accumulations of deposits as they form.Eliminates dead spotsThe single-channel geometry offers other important benefits as well. The fluid is fully turbulent at a much lower velocity than in straight tube heat exchangers, and each fluid travels at constant velocity throughout the whole unit. This eliminates the risk of dead spots and stagnation for more efficient heat transfer.Improved waste heat recovery Another secret behind the spiral is the true counter current flow, which enables crossing temperature situations where the cold fluid can be heated totemperatures very close to those of the hot fluid. This effect is further enhancedby the high turbulence in the unit.The ultimate solution for ultimate uptimeAlfa Laval spiral heat exchangers are based on our ingeniousSelfClean™ design. A single channel for each media provides optimal heat transfer and flow conditions for a wide variety of fluids – including extremely dirty process media – while ensuring maximum uptime within a reduced footprint.ChallengeDue to incredibly frequent cleaning needs from fouling, the facility required two shell-and-tubes in alternatingoperation in the PVC slurry interchanger position.SolutionMexichem ordered two compact SpiralPro models with high thermal efficiency to replace the existingshell-and-tubes. After seeing the results of reduced fouling and increased performance, Mexichem quickly followed up with six additional units.ResultAnnual steam savings: €110,000ChallengeBecause the media containedsuspended solids, the product sides of the exchangers quickly clogged after a short time in operation. Cleaning, which was needed every ten days, required 3-4 days of downtime.SolutionThe MIDER refinery replaced the tubular units with two Alfa Laval SpiralPro heat exchangers. The SelfClean™ design prevented fouling with the suspended solids, meaning the units could run for over three years without cleaning.ResultCapital payback time:Less than one year, thanks to reduced service costsFrequent cleaning a thing of the pastThe ultimate solution to fouling problemsMexichem, a global leader in plastic piping systems and in the chemical/petrochemical industries, needed to increase its production capacity to meet market demands.Leuna Germany’s MIDER refinery, owned by Total S.A., originally installed two tubular heat exchangers for cooling bottoms product in their fluid catalytic cracking unit.Alfa Laval – welded spiral heat exchangers 7You talk, we listenAt Alfa Laval, development is based on our close collaboration with customers. You are our best source of information and inspiration, and better under-standing your process challenges has taken our innovation further.To learn more about our complete service offering for spiral heatexchangers, and the ways our experts work with you to find the optimal solution for your processes, visit: https:///spirals.Low maintenance, easy access Alfa Laval spirals are designed for lowest possible maintenance, withmany customers going years before any routine inspection or cleaning is needed. When it is time to clean, easy-to-open SpiralPro covers make access far simpler than on comparabletechnologies like shell-and-tube heat exchangers. In fact, a quick hydro-blasting is typically all it takes to return your unit to full performance. All of our spiral heat exchangers can also be cleaned with a Cleaning-in-Place cycle as needed.Local support from experienced expertsWith a worldwide service network, Alfa Laval can make sure there is always a local service technician with the training and knowledge to support yourbusiness. Our specialists are here to help throughout the entire lifetime of your equipment, from expert guidance during engineering, installation and commissioning, to advice on cleaning, maintenance and operation throughout the spiral’s long service life. When you choose Alfa Laval, you are choosing a partner who will be at your side for the long run.Our spiral heat exchangers are specially designed to keep maintenance to an absolute minimum. But with Alfa Laval, service goes beyond the equipment. With over 50 years of experience with this technology, we can support you with unique expertise to help you get the most out of your heat exchanger and keep your business growing.Service that keeps you growing。
色普龙(醋酸环丙孕酮片)
色普龙(醋酸环丙孕酮片)【药品名称】商品名称：色普龙通用名称：醋酸环丙孕酮片英文名称：Cyproterone Acetate Tablets【成份】醋酸环丙孕酮【适应症】降低男性性欲倒错的性欲；不能手术的前列腺癌；女性重度雄性化体征：如非常严重的多毛症，雄激素依赖性严重脱发，最终导致秃顶（重度雄激素性脱发），常伴有重度痤疮及/或皮脂溢。
【用法用量】降低男性性欲倒错的性欲：一般治疗从1片bid开始，需要时可增加到2片bid，或甚至短期内2片tid。
药物应在饭后用少量液体吞服。
当达到满意效果时，应试用最低可能剂量维持疗效，常常每日2次，每次半片即已足够。
建立维持量或停止用药时，不应突然而应逐渐减量，间隔数周将每日剂量减少1片或最好半片。
为了稳定治疗作用，必须延长使用本药一段时间，如果可能，同时采用心理治疗方法。
不能手术的前列腺癌：睾丸切除术后为消除肾上腺皮质雄激素的作用：每次2片，每日1-2次（即100-200mg）。
未行睾丸切除术：每次2片，每日2-3次（即200-300mg）。
症状改变或减轻后，不应改变或中断治疗剂量。
用促性腺激素释放激素激动剂（LH-Rha）治疗时，为减少男性性激素的初始增加：开始时单用本药，每次2片，每日2次（即200mg）5-7天，继之用本药每次2片，每日2次（共200mg），与一种LH-Rha同时使用，共3-4周。
为消除在LH-Rha治疗时肾上腺皮质雄激素的作用：连续抗雄激素治疗，服用本药每次2片，每日1-2次（即100-200mg）。
女性重度雄性化体征：如非常严重的多毛症，雄激素依赖性严重脱发，最终导致秃顶（重度雄激素性脱发），常伴有重度痤疮及/或皮脂溢。
育龄妇女治疗宜在月经周期第1天开始（即出血的第1天），只有闭经妇女可以立即开始药物治疗。
这种情况下治疗的第1天被视作周期的第1天，按下列推荐用法常规观察。
在周期的第1-10天，每天餐后用水吞服2片本药，此外，这些妇女还服用含有雌、孕激素的制剂，如从月经周期的第1-21天，每天服用1片口服避孕药，以提供必要的避孕保护作用并稳定月经周期。
RH A使用说明书
7. 缝纫 .................................... 42
7-1. 自动缝纫 ............................ 42 7-2. 使用紧急停止开关 ..................... 43 7-3. 调整线的松紧 ......................... 44 7-4. 机针和切刀位置 ....................... 45 7-5. 送布台移到面前位置 .................. 46 7-6. 单脚踏板和双脚踏板操作的切换 ......... 46 7-7. 使用试送布模式 ....................... 47 7-8. 使用手动模式 ........................ 48 7-9. 中途改便模式 ........................ 49 7-10. 移动送布杆（-52 规格） ............. 49
使用时应避免暴露于直射的阳光下。 暴露于直射的阳光下可能会影响正确操作。
压缩空气的供气量应大于缝纫机所要求的总耗
哈希钠离子操作说明
钠离子电极校准方法高量程校准（1mg/L以上）1.安装氯化铵凝胶2.连接主机3.注满凝胶，确保凝4.往50ml烧杯中加入电极跟主机要配套胶充满电极25ml 100mg/L和这样才能应用上次校1000mg/L的标液，准的记录各加入一包离子增强剂，搅拌至溶解5.开机，设置相应参6.选择ISE离子测量7.按校准键，选择浓8.将烧杯放到搅拌器数，按read键确认模式度单位（mg/L），上，加入磁力搅拌子，按read键确认调节适当的转速9.将电极放入到100 10.显示屏会显示11.取出电极用去离子12.将电极放入到Mg/L的烧杯中stand 1？，按read 水冲洗干净并沾干，1000mg/L的烧杯中键确认，待读值此时显示屏会显示稳定后按read键stand 2?确认13.按read键进入校准，14.此时屏幕会显示15.按review键去查看16.用去离子水将电极待读值稳定后按store？，按read 之前校准记录冲干净，用滤纸Exit键退出并保存键存储校准曲线沾干方才的曲线（不校准第三点）17.准确量取25ml样18.加入一包ISA离子19.将电极放入到烧杯20.待读值稳定后便可品于50ml烧杯中增强剂中，并将其置于搅读值（等stabilizing伴器中，放入搅拌子消失即可）调节适当转速21．将电极用去离子水冲净，并存储于与平时所测钠离子浓度接近的标液中，待下次使用，如果长期不使用，将氯化铵凝胶拆下，并清洗电极，将电极放于存储液中保存低量程（1mg/L）以下1.安装氯化钾凝胶2.将电极安装到主机上3.将氯化钾凝胶充分4.校准前在电极存储电极跟主机要配套，注入到电极中液中至少浸泡一个这样才能应用上次校小时（推荐半天）准的记录然后在0.1mg/L的标液中至少浸泡8个小时以上，建议是一天。
5.用量筒量取400ml6.再将去离子水倒入7.在泡完电极后用去离8.加入0.4ml 10mg/L 去离子水600ml塑料烧杯中子将其冲干净，并用的标液于烧杯中，加入一包ISA离子滤纸沾干，将电极放在使之前将电极极增强剂，并搅拌均入到600ml烧杯中。
2015年美国霍纳达摩托车有限公司产品安装说明书
Accessory
REAR FRAME SKID PLATE P/N 08P51-HN8-100B
Application
TRX680FA/FGA
Publications No.
MII 13262-15324
Issue Date
Revised January 2015
STAY
REAR FRAME SKID PLATE
6 mm SOCKET HEAD SCREW
COLLAR (Reuse) WASHER (thin)
ENGINE GUARD
COLLAR (Reuse)
BOLT (Save)
REAR FRAME SKID PLATE
8 mm FLANGE BOLT
6 mm SOCKET HEAD SCREW THREAD LOCK
• WARNINGS are safety messages that indicate a potentially hazardous situation, which, if not avoided, could result in serious injury or death.
• CAUTIONS are safety messages that indicate a potentially hazardous situation which, if not avoided, could result in minor or moderate injury.
• NOTICES are messages to avoid vehicle or property damage.
• NOTES are additional information to help you complete a procedure.
阿尔法拉瓦尔热交换器产品介绍说明书
Lowering operational cost and optimizes the productivity of your plant with the right heat exchanger19th November 20201.Save cost of ownership and boost heat recovery by Spiral HeatExchanger2.Minimise CAPEX cost while maintaining efficiency usingCompabloc Heat Exchanger3.Robust solution in cyclic process conditions with DuroshellHeat ExchangerEngineering from University of Malaya.He is responsiblein refinery and oleochemical industries in Malaysia andSingaporeUniversity of Kocaeli.His work in Alfa Laval is focused onglobal sales for ethanol,sugar,starch,biodiesel andvegetable oil industriesSave cost of ownership and boost heat recovery in Spiral Heat ExchangerChoy Weng KeanSales Manager –Edible Oil Thermal & Separation−Challenges faced nowadays by refiners•Low heat recovery, high fuel cost making business unprofitable•Reduced heat efficiency and production flow rate due to fouling issue•Leaking in heat exchanger causing down time−RBDPO-BPO heat recovery profileTypical heat recovery in deodorization ~75%140°C260°C100°C 220°CType of heat exchangers in BPO-RBDPO heat recoveryImproved heat recovery up to 85%120°C260°C100°C240°C−2-stage heat recovery with lower capital costLow temp. Duty RBDPO: 260°C from deodorization columnBPO: ~160/170°CBPO: ~235~240°C to final oil heaterRBDPO: 120 °CHigh Temp. dutyFrom bleacher : BPO: ~100°COr other type i.e. fallingfilm/coil/S&T−•Higher saving on natural gas/diesel fuel in High Pressure Boiler•Lower overall capital cost with gasketed type at lower temperature duty •Easy to retrofit into your existing heat recovery system•Redundancy of operation/reduce downtime 150-200 kEURyearly−Self cleaning effectHorizontal mode can infuse self-cleaning effect to minimizefouling and reduce cleaning frequency−Open-open channel for better cleaning•Open-open channel -see through design •Better cleanability for BPO channel •RBDPO channel is closed-closed channelWater jet inWater jet out−Important for high temperature/pressure dutyTransition plate between the bodyand tubular center•Higher thermal & pressure fatigueresistance•Less leaking -no intermixing of hotand cold side−Way of welding is important for welded type heat exchanger CMT welding for channel closure•Fast welding and smaller heat affected area •More robust and less cracking issue •Important for open-open channelChannel closure−Specially designed for palm oil economizerLimit projection in case of leakageLimit leakage and protect gasket from deforming+30% hook bolts for better strengthReinforced cover to limit fluid bypassMinimise CAPEX cost while maintaining efficiency using CompablocEser AydinGlobal technology process expert•Down time caused by improper selectionof heat exchanger−Compabloc Welded Heat Exchanger•High efficiency•Temperature cross•High wall shear stress•Low fouling built up•Fully repairable•Compact•Fully cleanable•From -46°C to 343°C as standard and up to 400°C on request•From full vacuum to 40/42 barg1.Liquid to Liquid2.Reboiler3. 1-pass condenser4. 2-pass condenser−How to reduce installation cost?Minimized size•5-10 times less installation & service space•Saving in capital and installation costReduced weight•2-5 times less flooded weight•Saving in space and maintenance costSmaller hold up volume•Faster reaction during operation•Shorter column needed•Free service space is not required above reboiler•Less installation cost•Less transportation cost•Lower ΔT needed which can decrease the design & operationpressure of the columns•Less investment cost for columns −How to reduce total investment costReboiler and condenser in distillation columnGlycerin purificationMethanol recoveryHow to reduce downtime with the correct selection of Heat Exchanger?•End-to-end laser weld of the plates guarantees accessibility and protects against corrosion •Minimal risk of corrosion•Butt weld geometry with very strong joint, no place for cracks to start forming•Laser welded joint with higher welding speed, smaller heat-affected zone and minimal residual stress.•Essential for thin plates.Laser Welding technology for robustnessWatch C-Weld video hereColumn linerHeat transfer coreTabUnobstructed cornersWatch Compabloc cleaning video here−Fully CleanableNo stagnant zones•100% mechanicallycleanable plates•Good-as-new performanceafter cleaning.Inefficienthydro jetIneffectivecleaning•Stagnant zones •Poor cleanability •Fouling flushedacross the plates•CP50 reboiler for glycerine purification column•Rectification column reboiler •Methanol recovery column reboilers in Europe•Methanol recovery and glycerinepurification column reboilers in SouthEast AsiaRobust solution for cyclic process conditions with Duroshell Heat ExchangerEser AydinGlobal technology process expert•High total cost of ownership of shell andtubeSpecifically designed for demanding duties such as high pressure and high temperature applications •Robustness due to unique design•High resistance to thermal and mechanical fatigue •Superior thermal performance•Compact solution which you can save capital cost •Design pressure: 100bar/FV•Design temperature: -160°C/450°C−Duroshellheat exchangers−How Duroshell worksWatch Duroshell video hereCompact design with flow pathDistribution tube 1 Distribution tube 2Distribution tube openings Heat transfer plate−Key features of DuroShellUnique Cut Wings plate shape•High thermal flexibility (easy multi-pass)•Excellent compacity •Less weightPower Pack distribution tubes through all plate packs•Guide fluid for maximizing use of HTA •Smaller footprint required •Strengthen plate pack •Increase fatigue resistanceWatch Cut Wings plate video hereWatch Power Pack distribution tubes video here−Key features of DuroShellUnique Roller Coaster plate pattern•Humps up & down with homogeneous resistance acting as stiffenersin all directions•Same resistance in homogeneous expansion•Increased fatigue resistance•Optimized flow distribution•No peak stresses in port areasWatch video here•Heat recovery 1-phase & 2-phase •Liquid heating / cooling •Evaporation / Condensation•Partial condensation•Gas coolingRobust solution for cyclic process conditions with Duroshell•Unique design•High efficiency•Robustness for cyclic duties•Less installation cost and compact footprint1.Save cost of ownership and boost heat recovery -Spiral Heat Exchanger2.Minimize CAPEX cost while maintaining the efficiency -Compabloc3.Robust solution in cyclic process condition -Duroshell。
TA Instruments Rheology Advantage操作说明书
Rev MPage 1Issued June 2020TA Instruments New Features inRheology AdvantageNoticeThe material contained in this manual, and in the online help for the software used to support this accessory, is believed adequate for the intended use of the accessory. If the accessory or procedures are used for purposes other than those specified herein, confirmation of their suitability must be obtained from TA Instruments. Otherwise, TA Instruments does not guarantee any results and assumes no obligation or liability. TA Instruments also reserves the right to revise this document and to make changes without notice.TA Instruments may have patents, patent applications, trademarks, copyrights, or other intellectual property covering subject matter in this document. Except as expressly provided in written license agreement from TA Instruments, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property.TA Instruments Operating Software, as well as Module, Data Analysis, and Utility Software and their associated manuals and online help, are proprietary and copyrighted by TA Instruments. Purchasers are granted a license to use these software programs on the module and controller with which they were purchased. These programs may not be duplicated by the purchaser without the prior written consent of TA Instruments. Each licensed program shall remain the exclusive property of TA Instruments, and no rights or licenses are granted to the purchaser other than as specified above.TA Instruments can accept no liability for loss or damage, however caused, arising from the faulty or incorrect use of its products.TA Instruments shall not be liable for any damages caused by interactions between exogenous materials (e.g. chemicals) and parts of the accessory. This includes interactions of gaseous, liquid or solid materials with parts of the accessory.Important: TA Instruments Manual Supplement Please click the TA Manual Supplement link to access the following important information supplemental to this Getting Started Guide:•TA Instruments Trademarks•TA Instruments Patents•Other Trademarks•TA Instruments End-User License Agreement•TA Instruments OfficesTable of Contents Notice (1)Important: TA Instruments Manual Supplement (2)New Features in Rheology Advantage v5.8.2 (5)Bug Fixes (5)New Features in Rheology Advantage v5.8.1 (5)Bug Fixes (5)New Features in Rheology Advantage v5.8 (5)Bug Fixes (5)New Features in Rheology Advantage v5.7.2 (6)New Features (6)Bug Fixes (6)New Features in Rheology Advantage v5.7.1 (6)New Features (6)Bug Fixes (6)New Features in Rheology Advantage v5.7 (7)New Products Supported (7)New Features (7)Bug Fixes (7)New Features in Rheology Advantage v5.6 (8)New Products (8)New Features (8)Creep Drift Subtraction (8)Saving Images as JPEG or BMP (9)Batch Export of All Images in a File (9)New Features in Rheology Advantage v5.5 (10)New Products Supported (10)New Features (10)Fast Sampling in Oscillation (10)New Features in Rheology Advantage v5.4 (12)New Features (12)Instrument Control (12)Navigator (12)New Features in Rheology Advantage v5.3 (13)New Features in Rheology Advantage v5.2 (14)New Features (14)Support for the AR-G2 Rheometer (14)Communication Using Serial [RS232] or Ethernet [TCP/IP] (14)New Front Panel for AR-G2 (15)Fast Sampling Data Streams (15)Fast Zero Gap Routine (15)Zero Gap Routine Optimized (15)Braking Option Added (15)AR-G2 Bearing Mode (16)Integer Rotation Averaging (16)Smart Swap Geometries (17)Image Capture (18)Support for TA Update (19)Previous Versions of New Features in Rheology Advantage (20)TA Instruments Offices (21)Bug Fixes•Changed the gap zero mode for DHR instruments to Standard, Normal Force and deceleration.•Fixed the SetInstrumentOption assist for DHR (the list was empty)•Fixed the maximum head speed for the DHR (now 10000)•Zero gap form now says geometry positioning is not required for ARG2 and DHR1.cpp •Changed the instrument status on the instrument screen during a run.Bug FixesNew Features in Rheology Advantage v5.8.1Bug Fixes•Fixed torque rounding in repeated creep•Added Navigator support for DHRNew Features in Rheology Advantage v5.8Bug Fixes•Fixed torque rounding in repeated creep•Added Navigator support for DHR•Changes to Navigator script files to support AASTHO TP70-13 and MS Word 2013New FeaturesAdded new scripts for asphalt users who want to try these proposed new methods: “high stress repeated creep test” and “mixing and compaction test.”Bug FixesFixed bug in stepped flow test that incorrectly recorded point velocity below 0.001 rad/s as the last velocity measured in the sample period rather than the slope of the displacement vs. time over the whole sample period.New Features in Rheology Advantage v5.7.1New Features•Repeated creep:•Creep and recovery times can now be set independently in the range 0.1 to 1000 seconds.•Modified Navigator analysis script to calculate Jnr diff to latest AASHTO definition.•AR-G2 utility programs modified to run on Japanese operating systems.•New instrument firmware 8.29.•AR Series Operator Manual modified to include information on Interfacial Double-Wall Ring (DWR).Bug Fixes•Fixed bug where user-defined models could not be selected for analysis.•Fixed bug in Rheology Advantage related to registry entries for Navigator.New Products SupportedIn this version, several new TA Instruments products are supported by Rheology Advantage:•Small Angle Light Scattering (SALS) Accessory: For information on the SALS accessories refer to the •AR-G2/AR 200ex/AR 1500ex instrument manual.•Automatic Asphalt Temperature Calibration Kit: For information on the Automatic Asphalt Tempera-ture Calibration kit, refer to the Asphalt Submersion Cell manual.•SER2 Extensional Fixture: For information on the SER2 extensional fixture refer to the AR-G2/•AR 2000ex/AR 1500ex instrument manual.New Features•Torsion rectangular sample maximum sample width increase to 15 mm•Updated localizationBug FixesThe majority of these bugs have already been fixed by TAUpdates issued since the release of Rheology Advantage 5.6. The following is a list of those bugs:•Cross over calculation•Williamson model•Default radius for pressure cell rotor•AR500/550/1000 communication errors•Multilingual tagenserver.dll crash•Wrong number of points in log continuous flow rampNew ProductsFor information on the UV Light Guide and UV LED accessories, please refer to the main instrument manual.New FeaturesCreep Drift SubtractionThis is a new analysis option that allows any steady state drift in a recovery step to be subtracted from both creep (retardation) and recovery steps in a two step file. The steady state can be selected manually using the analysis cursors or calculated automatically. The new file that is created as a result of the analysis can be treated like any creep file for analysis and graphing.Saving Images as JPEG or BMPTo avoid compression issues images can now be additionally saved as bitmaps. This increases the file size therefore, it should only be used if a lossless format is required for post analysis. The selection is made on the camera setup screen.Batch Export of All Images in a FileTo avoid cutting and pasting individual images, it is now possible to export all images from a file as either JPEG or BMP. If the images were originally saved as JPEG, exporting to BMP will not recover any information lost during the compression process. Select Export All Images from the File menu, or from the right-click pop-up on the selected file/s in the Results List.New Features in Rheology Advantage v5.5New Products SupportedAR 1500ex Smart Swap™ Asphalt Submersion CellNew Features•Fast sampling in oscillation•Runs under Microsoft VISTAFast Sampling in OscillationThe Fast Sampling option is now available in this release with the following characteristics:•Available for time and temperature sweeps on AR-G2, and AR 2000ex.•Sampling rate is up to twice fundamental frequency. It depends on number of cycles specified and can be utilized at up to 25 Hz. For example, one cycle at a frequency of 25 Hz will result in 50 data points per second.•Available in controlled strain and controlled stress modes.•To be able process this data stream, the following standard features are disabled when running in the fast sampling mode:•mini status window•waveform display and storage•multiwave•harmonic analysis•step terminationThis new feature is activated on the Controlled strain/Controlled stress tab. The number of cycles to be averaged per data point is also set on this tab. Once this mode has been enabled, the procedure test types become limited and other tabs are greyed out. See the figures below.New Features in Rheology Advantage v5.4New FeaturesInstrument ControlThe following items are included in this release of the Rheology Advantage instrument control program:•Support for the AR2000ex rheometer had been added.•Support for Electrically Heated plates (EHP) has been added (AR-G2 and AR2000ex only).•Support for Upper Temperature Sensor (UTS) has been added (AR-G2 only).•Minimum limit for the temperature ramp rate has been changed to 0.01ºC/min.•You now have the ability to save the results of a service bearing test to a file that can be loaded into Data Analysis.•ETC camera viewer driver has been updated for USB2 video adapter.•Fill and drain icons are reactivated on status page when asphalt is selected under instrument settings for AR1000.•Data Analysis•The following items are included in this release of the Rheology Advantage data analysis program:•The number of digits has been extended for torque and oscillatory (5 significant figures).•File date/time has been added as an optional key for graph view.•Fixed incorrect reporting of the step termination value.•Fixed missing axis after a straight line fit on certain data files.•Smoothing of graph while using logarithmic scales on x and/or y-axis no longer causes shifts of graph data.•The default path for file printing of results is now set to My Documents folder.•The results file time in Custom Reports, previously reported in GMT, is now reported in local time.NavigatorThe following items are included in this release of the Navigator program:•For Ethernet systems, Navigator is run by right clicking on the instrument icon in TAIE and selecting•Connect to the instrument using Navigator as seen in the figure below.•Set File Name has been added to list of functions.•Asphalt scripts have been modified for multi-stress repeated creep.Version 5.3 of the Rheology Advantage software has been updated with additional support for the AR-G2 instrument and assorted improvements. These changes are not readily visible to the person using the software as they function during the running of the software and are not seen as new features.Refer to Rheology Advantage 5.2 release notes for the most recent enhancements to the software.New FeaturesSupport for the AR-G2 RheometerCommunication Using Serial [RS232] or Ethernet [TCP/IP]The TA Instruments AR-G2 Rheometer can take advantage of Ethernet communications over your local area network [LAN]. In this scenario the rheometer control electronics and PC are plugged into separate sockets, and TA Instrument Explorer [TAIE] is used to launch the instrument control software. There are two views (shown below) that can be used to open the instrument control program and access an instrument. To stop unauthorized access to your rheometer you can configure your rheometer with a password so that a login is required.Full details on setting up Ethernet communications and login passwords are given in the Installation Instructions 925911.000.New Front Panel for AR-G2The AR-G2 instrument has additional buttons on the front panel of the rheometer, as shown in the figure below.Fast Sampling Data StreamsWhen using Ethernet communications, there is now only a 15-second lag to allow the computer to catch up with fast sampling in creep, stress relaxation, and peak hold. This allows for shorter step times.Fast Zero Gap RoutineWhen the Geometry Smart Swap is enabled, positioning the head within 5 mm is not required after the first time a zero gap is performed. This applies to each Smart Swap geometry/Smart Swap temperature system combination. The instrument stores up to 100 combinations.Zero Gap Routine OptimizedThe zero gap routine has been optimized for the AR-G2 rheometer. It uses sensors in the magnetic bearing rather than deceleration or normal force modes. Those two modes, which are available on other AR rheometers, are not available on the G2.Braking Option AddedA negative torque pulse, calculated from the moment of inertia and the angular velocity at the end of the previous step, is applied in the first few milliseconds of a creep procedure recovery step [stress ortorque=0]. This removes a significant error from the recovery data for weakly elastic and near Newtonian materials. See the figure below for the associated page in the software.AR-G2 Bearing ModeThe stiffness of the magnetic thrust bearing in the AR-G2 can be adjusted to better suit an application. This is not the case with the air bearing. In most cases, the default Stiff mode is used with the AR-G2, but it has been shown that measurements on low viscosity materials can be improved by selecting the Soft mode. The current bearing mode is shown on the instrument status page, and is set by selecting Instrument/Set bearing mode from the main menu.Integer Rotation AveragingIt has been shown that low torque data can be improved by averaging the torque over complete rotations of the motor/bearing. To make it easy to perform this type of averaging an option has been added to the Advanced tab for Stepped Flow tests. This is called Integer rotation averaging.When selected for each step, the rheometer will average data over as many complete rotations that can be made in the programmed point time.If the point time does not allow for a complete rotation, the test will continue until the criteria of a complete rotation is met. You need to apply common sense when using this mode, particularly in a stress controlled test as there is no way of knowing how long the test will take as seen in the message displayed in the window shown to the right.If you step from high to low, you can collect data and then abort the test once your patience threshold has been exceeded.In controlled speed mode, the rheometer is able to calculate the length of the test so you can judge if this is acceptable before starting.Smart Swap GeometriesSmart Swap™ geometries are an extension of the Smart Swap technology previously used by AR2000 temperature systems. These geometries can be automatically identified when installed on the rheometer. The geometry serial number is encoded in a magnetic strip on the head of each geometry. When the geometry is set up for the first time a link is established between this serial number and a geometry file in the instrument control software. The geometry then becomes “Smart”.When a Smart Swap Geometry is attached to the rheometer, a sensor registers the attachment and slowly spins the shaft to read the serial number from the magnetic strip. The software then loads the geometry file associated with this serial number as shown in the figures below.It may become necessary to disable the Smart Swap feature - for example you may want to temporarily use a geometry that, for some reason, cannot be read. Unchecking Smart swap enable on the Geometry menu will accomplish this.For more information, refer to the chapter on Smart Swap Geometries in the AR-G2 Operator's Manual. Image CaptureThe AR-G2 has the ability to allow you to view steaming video from the ETC Viewer or a compatible web cam within the instrument control software. Once the appropriate driver has been installed, the camera icon in the main tool bar (shown in the figure below) toggles this option.The following are highlights of the ETC Viewer and image capture software capabilities. For detailed information, please refer to the AR-G2 Operator's Manual.•An image can be captured (with certain limitations) for every saved data point. This is activated on the Options/Experiment tabs for each procedure type.•The streaming video (live image) for the ETC viewer has lighting and focus controls.•Right clicking on the image allows access to the image set-up, where you can select from the available cameras, adjust size preferences, etc•If images have been stored with the data file, the individual point images can be viewed in the data analysis software by checking the point image under Options/Settings. The image for the current point (marked with '*' on the graph or highlighted in the table view) is shown in a dockable window.•The stored images can be played back in sequence by selecting Show image sequence from the pop-up menu.Support for TA UpdateTA Update will be available for all software packages supplied by TA Instruments. If your computer is connected to the Internet with a TA Update-ready version of Advantage or Orchestrator, you will be able to configure your system to automatically check for updates to software and firmware. This will allow you to keep up to date with new features and bug fixes. RA5.2 is the first version of Rheology Advantage that supports TA Update. To access this new feature, select Help\Check for updates on the main menu.For more details on configuring and using TA Update, click the Help button when the program opens to access the online manual.Previous Versions of New Features in Rheology AdvantageClick here to open the document containing the New Features that were present in Rheology Advantage versions 5.1, 5.0, 4.1, 4.01, and 3.0.TA Instruments OfficesFor information on our latest products, contact information, and more, see our web site at: TA Instruments — Waters LLCCorporate Headquarters159 Lukens DriveNew Castle, DE 19720USATelephone: 302-427-4000Fax: 302-427-4001Email:**********************。
智能机器人使用手册说明书
User ManualPrecautions!Precautions for BatteriesThe batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery etc).Do not touch the product when it is moving to avoid hand injuries.1.2.3.All example of use refer to warning card.Keep this product away from fire and keep it dry and clean.Do not squeeze this product with too much force during use.Please use the robot on a flat surface.Maintain an appropriate distance from the robot while it is in operation to avoid injuries.When the robot is in operation, do not forcibly bend its joints as to avoid hand injuries and damage to the machine.Please use the supplied charger for charging the robot.The servos for robot joints are precisely designed and should not be disassembled without authorization. Contact us if necessary.For repair services, go to your local after-sales service center or contact our customer support.When an abnormality is found during debugging, immediately press the Emergency Stop button and cut off the power as to avoid hand injuries and damage to the machine.Take necessary preventive measures when using the robot. Do not use it at heights or near any edges as it may fall off and result in damage.Man-made damage is not covered by our warranty.It is best to use the robot for no longer than 1 hour each time, which will extend the service life of the servo actuators.This product is not intended for children under 14 years of age.You will be provided with software updates if any. For some features, the latest update instruction shall prevail.Please use HDMI cables with good shielding layers and magnetic rings when connecting Yanshee to an external monitor.1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.16.Immediately Cut off the power and contact us when:Warning:EmergencyStop buttonCAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.a. The robot smokes or you smell something burning; orb. Water or any other foreign matter enters the robot; orc. The robot is damaged.The User Manual contains important information. Please keep it for future reference!4.5.6.An "Emergency Stop" button is on the top of the robot. When the robot is in operation, you can press this button to immediately cut off the power and stop its operation.01. Packing ListYanshee RobotUser Data Set*1(Quick Start Guide*1,Warranty Card*1)Yanshee Robot components: 1Quick Start Guide: 1Warranty card: 1Battery: 1Power adapter: 1Power cord: 1Spare parts kit: 1 (wires, screws)Screwdriver: 1Charging dock: 1 (Selective Accessories)Sensor Suite: 1 (Selective Accessories)Usage Examples: 1Front view of YansheeBackside view of YansheeIntroduction to GPIO Extended Port Note:Ports 3, 5, 12, 35, 38 and 40 are used, of which ports 3 and 5 are for I2C communication and ports 12, 35, 38 and 40 are for audio I2S signaling.GPIO Pinout DiagramPhysicalPin No.Function Function03. SpecificationsAppearanceElectrical SpecificationsConstructionHumanoid Product ModelERHA101Product NameYanshee ColorSilver Dimensions 370*192*106 (mm)Weight ≈2.05 kgServo Actuators 17 degrees of freedom (DOF)Operating voltage DC 9.6VPower 4.5W~38.4WPower adapterOperating temperature Material Aluminum alloy structure, PC+ABS housing0℃ to 40℃Input: 100V ~240V, 50/60Hz 1.5AOutput: 9.6V, 4AMaster Chip and MemoryNetworkVision SystemSTM32F103VDT6Broadcom BCM2837 1.2GHz 64-bit quad-core ARMv8 Cortex-A53RAM 1GBProcessorMemory 16GBBluetoothBluetooth 4.1Battery capacity 3000mAhCamera 8 mega-pixel camera, fixed focusLightWi-Fi Operating system RaspbianSupports Wi-Fi2.4G802.11b/g/n fast connectEyes: 3-color LED lights *2Chest: 3-color LED notification lights *3Microphone: green indicator *1Charge: dual-color indicator *1AudioSensorsDebugging PortOthers MicrophoneSingle SpeakerStereo speakers *29-axle motion tracking sensor *1Motherboard temperature sensor *1POGO 4PIN *6Built-in sensorExtended port HDMI1GPIO40 (6 of them are used)USB2Control Mode Mobile software (APP); voice control;PC control （Raspbian ）KeysFor BT ：Maximum OutputPower :5.636 dBmFor 2.4G WIFI ：Maximum Output Power : 18.19dBm ON/OFF key on the chest;Emergency Stop key on the top Applicable Standard04. Download and Sign in to Mobile Software (APP)Download the APP:Sign in:APP Download QR Code YansheeMethod 1: Scan the QR code below to enter the APPdownload page where you can click to download theYanshee APP;Method 2: Search and download "Yanshee" in APPStore/Google Play/MyAPP or other platforms.After installing the APP, run the APP and sign in according to the instruction. If you are a registered user, log into the APP directly.Method 3: Log onto /en to searchfor your desired product and download the app.05. Assemble the RobotOpen and log into the APP. Select the assembly tutorial to learn about how to assemble or disassemble the robot from the menu bar.Select the disassembly tutorial to learn about how to disassemble the robot.06. Install and Charge the BatteryInstall the Battery• The battery compartment is below the left arm of the robot. Rotate the battery cover clockwise 90° to unlock it.• Install the battery into the battery cover and then reinstall the battery cover. Rotate the battery covercounter-clockwise 90° to lock it.Charge the BatteryMethod 1: After installing the battery, connect the power cord to the charge port on the back of the robot to charge the battery.07. Start the Robot and Set up the Network Method 2: Place the battery onto the dock charger, and then connect the power cord to the charge port of the dock charger to charge the battery.• Press and hold the button on the chest for 2-3 seconds and release until the indicator is lit up in blue. The robot is booted up after you hear a boot-up sound.• Make sure that both the Bluetooth and Wi-Fi are enabled on the smart devices. Open and log into the Yanshee APP, and click the icon on the upper left of the home screen to connect the robot and set up the network.• Refresh and search devices detected by the system, and select the device to be connected according to the last 4 digits of the MAC address value on the label attached ontothe back of the robot.• After the desired device is selected, the APP will selectthe SSID identical to the local Wi-Fi to be displayed on thepage. Enter the correct Wi-Fi password and click the"Join" button, the robot will set up and connect to thenetwork and also give you a voice prompt, saying"Connecting".Note:You will hear a voice prompt saying "Connected" after successful connection.If the connection fails, you will hear a voice prompt saying, "Connection Failed". In this case, please set up the network again.You do not have to set up the network again for later use, just directly select the desired device from the list.After setting up the network, you can use the APP to controlthe robot and learn more information.08. Use of Mobile APPFall-over ManagementThe mobile APP has a built-in graphic user interface and integrates features including motion tracking, FPV, Blockly visual programming, action readback programming, curriculums, BBS and real-time sensor data view.This feature is off by default. You can enable the feature via the APP. The robot can pick itself up if it falls over whenenabled.Language SwitchingBoth Simplified Chinese and English are supported so far. Goto your APP to select the desired language for the robot.09. Built-in Smart ApplicationsRaspbian OS issued by Raspberry Pi is used as the robot software. This open source software comes with the following features:Speech RecognitionThe robot is configured with speech recognition and semantic recognition for Chinese, allowing you to chat with it.When the robot started, press the button on the chest until the chest lamp turns green, then you can chat with the robot after a "tinkling" sound is heard.Visual ProcessingThe robot is configured with face analysis, face tracking and other features. You can call these functions through the programming tools in the APP or Raspberry Pi system. UBTECH provides the Open SDK API, which enables you to configure your own visual identification functions withthird-party visual identification platforms.Note: please abide by relevant laws when using thethird-party voice platform.Auto Update:After the robot is connected to the Internet, the built-in platform software will automatically detect whether you have the latest version and execute the update process.Do not cut off the power or disconnect from the Internet while updating.10. Open Source Platform(2). Use the USB port on the Yanshee to connect a USB, keyboard and mouse.The Yanshee robot is built on the Raspberry Pi open source platform and open SDK files are provided, allowing a user to configure, learn or develop smart Applications as desired, and also allowing developers to create their own robot.(1). Use an HDMI cable to connect the Yanshee robot to amonitor.(3). You can log onto the Linux system from Raspberry Pi bysimply starting the robot.(4). SDK API and Demo codes are available from(5). For developers, please visit https://to learn more information about Raspberry Pi./enThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.FCC Caution:Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits should be installed and operated with minimum distance20cm between the radiator & your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.FCC ID: 2AHJX-YANSHEE-1UBTECH ROBOTICS CORP LTDAdd: 16th & 22nd Floor, Block C1, Nanshan i Park, No. 1001 Xueyuan Road, Nanshan District, Shenzhen City, China P.R.T el: 800-276-61372019-09-25尺寸：95*130mm颜色：四色双面印刷材质：105g铜版纸工艺：骑马钉公差：±0.5mm。
博雅人凝血酶原复合物说明书
博雅人凝血酶原复合物说明书
博雅人凝血酶原复合物的说明书包括以下部分：
一、概述
博雅人凝血酶原复合物主要用于治疗凝血因子Ⅱ、Ⅶ、Ⅸ、Ⅹ缺乏症（单独或联合缺乏）包括凝血因子Ⅸ缺乏症（乙型血友病），以及Ⅱ、Ⅶ、Ⅹ凝血因子缺乏症；抗凝剂过量、维生素K缺乏症；肝病导致的出血患者需要纠正凝血功能等症状。
二、成分
本品主要成分为人凝血酶原复合物，含有维生素K依赖的在肝脏合成的四种凝血因子Ⅱ、Ⅶ、Ⅸ、Ⅹ。
三、用法用量
具体使用方法需遵医嘱，一般无不良反应，快速滴注时可引起发热、潮红、头痛等不良反应，减缓或停止滴注后，上述症状即可消失。
四、注意事项
1. 除肝病出血患者外，一般在用药前应确诊患者系缺乏凝血因子Ⅱ、Ⅶ、Ⅸ、Ⅹ方能对症下药。
冠心病、心肌梗死、严重肝病、外科手术等患者如有血栓形成或弥散性血管内凝血(DIC)倾向时，应慎用本品。
2. 本品不得用于静脉外的注射途径。
3. 新生儿的生理机能减低，故应慎重用药。
如有必要应用时应在医师指导和严密观察下使用。
4. 老年人的生理机能减低，故应慎重用药。
5. 不可与其他药物合用。
五、贮藏
冷藏。
请注意，使用博雅人凝血酶原复合物时应遵医嘱，如有不适，请及时咨询医生或专业人士的建议。
四正柏生物 Human IgA ELISA 试剂盒说明书
REV20190712仅供研究，不用于临床诊断。
客服热线: 400-7060-959﹡技术支持邮箱: **************公司官网: 目录简介 ................................................................................................................................................... - 3 -检测原理............................................................................................................................................ - 3 -试剂盒组分 ........................................................................................................................................ - 4 -储存条件............................................................................................................................................ - 4 -其他实验材料(不提供，但可协助购买) : ......................................................................................... - 5 -注意事项............................................................................................................................................ - 5 -样本收集处理及保存方法 .................................................................................................................. - 5 -试剂准备............................................................................................................................................ - 6 -操作步骤............................................................................................................................................ - 7 -操作流程图 ........................................................................................................................................ - 8 -操作要点提示..................................................................................................................................... - 8 -结果判断............................................................................................................................................ - 8 -结果重复性 ........................................................................................................................................ - 9 -灵敏度................................................................................................................................................ - 9 -特异性.............................................................................................................................................. - 10 -参考文献.......................................................................................................................................... - 10 -该产品由北京四正柏生物科技有限公司研制。
人类Alpha 2-M ELISA试验试剂盒说明说明书
Human Alpha 2-M ELISA KitCatalog Number EH20RB (96 tests), EH20RBX10 (10 x 96 tests)Rev. 7Product descriptionThe Human Alpha 2-M ELISA Kit is a solid-phase sandwich Enzyme-Linked Immunosorbent Assay (ELISA) designed to detect and quantify the level of human Alpha 2-M in cell culture supernatants, plasma, and serum.Contents and storageUpon receipt, store at 2-8°C for 6 months or -20°C for 1 year.Components Cat. No. EH20RB(96 tests)Cat. No. EH20RBX10(10 x 96 tests)Human Alpha 2-M Antibody Coated wells, 96-well plate 1 plate10 plates Human Alpha 2-M Biotin Conjugate 2 vials20 vials Human Alpha 2-M Standard, recombinant human Alpha 2-M 2 vials20 vialsWash Buffer Concentrate (20X)25 mL12 x 25 mL Assay Diluent (5X)15 mL10 x 15 mL Streptavidin-HRP (700X)0.2 mL10 x 0.2 mLTMB Substrate12 mL10 x 12 mLStop Solution8 mL10 x 8 mL Adhesive Plate Covers220Materials required but not suppliedDistilled or deionized waterMicrotiter plater reader with software capable of measuring at 450 nmPlate washer-automated or manual (manifold dispenser)Calibrated adjustable precision pipettes and glass or plastic tubes for diluting solutionsProcedural guidelinesReview the Procedural guidelines and Plate washing directions in the ELISA Technical Guide at for details prior to starting the procedure.Reagents are lot-specific. Do not mix or interchange different reagent lots from various kit lots.Prepare 1X Wash Buffer1.Allow Wash Buffer Concentrate (20X) to reach room temperature and mix to redissolve any precipitated salts.2.Dilute 20 mL of the Wash Buffer Concentrate into 380 mL of deionized or distilled water. Label as 1X Wash Buffer.3.Store the concentrate and 1X Wash Buffer in the refrigerator. Use the diluted buffer within one month.Prepare diluentAssay Diluent should be diluted 5-fold with deionized or distilled water before use.Prepare biotin conjugate1.Briefly spin down the biotin conjugate before use.2.Add 100 µL of 1X Assay Diluent into the vial to prepare a biotin conjugate concentrate.3.Pipette up and down to mix gently (the concentrate can be stored at 4°C for 5 days).4.The biotin conjugate concentrate should be diluted 80-fold with 1X Assay Diluent and used in step 2 of ELISA procedure.Sample preparation guidelinesCollect samples in pyrogen/endotoxin-free tubes.Freeze samples after collection if samples will not be tested immediately. Avoid multiple freeze-thaw cycles of frozen samples.Thaw completely and mix well (do not vortex) prior to analysis.Avoid the use of hemolyzed or lipemic sera. If large amounts of particulate matter are present in the sample, centrifuge or filter sample prior to analysis.Pre-dilute samples1X Assay Diluent should be used for dilution of serum, plasma, and cell culture supernatant samples.Dilute serum and plasma 2,000-fold.Because conditions may vary, it is recommended that each investigator determine the optimal dilution to be used for each application.Dilute standardsNote: Use glass or plastic tubes for diluting standards.1.Briefly spin down a vial of lyophilized standard.2.Add 400 µL of 1X Assay Diluent (Assay Diluent should be diluted 5-fold with deionized or distilled water before use) into vial toprepare a 3,000 ng/mL standard. Dissolve the powder thoroughly by a gentle mix. Pipette 300 µL of 1X Assay Diluent into each tube. Use the stock standard solution to produce a dilution series (shown below). Mix each tube thoroughly before the next transfer.1X Assay Diluent serves as the zero standard (0 ng/mL).200200 200 200 200 200Diluentvolume300 µL300 µL300 µL300 µL300 µL300 µL300 µLStd1 3000 ng/mLStd21200 ng/mLStd3480 ng/mLStd4192 ng/mLStd576.8 ng/mLStd630.72 ng/mLStd712.29 ng/mLBlank0 ng/mLPrepare 1X Streptavidin-HRP solutionNote: Prepapre the Streptavidin-HRP within 15 minutes of usage.1.Briefly spin the Streptavidin-HRP and pipette up and down to mix gently before use, as precipitates may form during storage.2.Dilute Streptavidin-HRP 700-fold with 1X Assay Diluent.3.Do not store diluted solution for future use.Perform ELISA (Total assay time: 4 hours and 45 minutes)Allow all reagents to reach room temperature before use. Mix all liquid reagents prior to use.IMPORTANT! Perform a standard curve with each assay.Determine the number of 8-well strips required for the assay. Insert the strips in the frames for use. Re-bag any unused strips and frames, and store at 2 to 8°C for future use.1Bind antigen a.For the standard curve, add 100 µL of standards to the appropriate wells (see Dilute standards). Forsamples, add 100 µL of diluted samples (see Dilute samples) to the wells.b.Cover wells and incubate for 2.5 hours at room temperature or over night at 4°C with gentle shaking.c.Discard the solution and wash 4 times with 1X Wash Buffer. Wash by filling each well with WashBuffer (300 µL) using a multi-channel Pipette or autowasher. Complete removal of liquid at each stepis essential for good performance. After the last wash, remove any remaining Wash Buffer byaspirating or decanting. Invert the plate and blot it against clean paper towels.2Add biotin conjugate a.Add 100 µL of prepared biotin conjugate (see Prepare biotin conjugate) to each well.b.Incubate for 1 hour at room temperature with gentle shaking.c.Discard the solution. Repeat the wash as in step 3.3Add Streptavidin-HRP a.Add 100 µL of prepared Streptavidin-HRP solution (see Prepare Streptavidin-HRP solution) to eachwell.b.Incubate for 45 minutes at room temperature with gentle shaking.c.Discard the solution. Repeat the wash as in step 3.4Add TMB substrate a.Add 100 µL of TMB Substrate to each well. The substrate will begin to turn blue.b.Incubate for 30 minutes at room temperature in the dark with gentle shaking.5Add stop solution Add 50 µL of Stop Solution to each well. Tap the side of the plate gently to mix. The solution in thewell changes from blue to yellow.Read the plate and generate the standard curve1.Read the absorbance at 450 nm. Read the plate within 30minutes after adding the Stop Solution.e curve-fitting software to generate the standard curve. Afour parameter algorithm provides the best standard curve fit.Optimally, the background absorbance may be subtracted from all data points, including standards, unknowns and controls,prior to plotting.3.Read the concentrations for unknown samples and controlfrom the standard curve. Multiple value(s) obtained forsample(s) by the appropriate factor to correct for the sampledilution.Note: Dilute samples producing signals greater than that of thehigest standard in Standard Diluent Buffer and reanalyze.Multiply the concentration by the appropriate dilution factor.Performance characteristicsStandard curve (example)These standard curves are for demonstration only. A standardcurve must be run with each assay.Intra-assay precisionTo determine intra-assay precision, two standard curves and 3 samples for each standard curve are run. The standard curve concentration points as well as the samples are tested in duplicates on a single plate. Two different concentration values are obtained for each sample, using the two separate standard curves. The two concentration values for each sample is compared to each otherusing the CV% calculation. Intra-Assay CV%: <10%Inter-assay precision To evaluate inter-assay precision, the second standard curve is tested on a separate plate along with the second set of samples. Inter-Assay CV%: <12%RecoverySample TypeAverage % Recovery Range (%)Cell Culture Supernatants 12198-144Plasma 12199-148Serum10888-127SpecificityThis ELISA antibody pair detects human Alpha 2-M. Other species not determined.Linearity of dilutionThe cell culture supernatants, plasma, and serum samples were spiked with recombinant human Alpha 2-M, serially diluted in sample diluent and evaluated. Observed values were compared to expected values to calculate percent recovery and demonstrate the dilution linearity of the assay.Sample TypeAverage % Expected Range (%)1:2 Dilution1:4 Dilution1:2 Dilution1:4 DilutionCell CultureSupernatants121135114-128125-145 Plasma119126115-123115-133Serum126141118-134132-150SensitivityThe minimum detecable dose of human Alpha 2-M is 4 ng/mL.This was determined by assaying replicates of zero and thestandard curve. The mean signal of zero + 2 standard deviationsread in dose from the standard curve is the LLD. This value is thesmallest dose that is not zero with 95% confidence.Limited product warrantyLife Technologies Corporation and/or its affiliate(s) warrant theirproducts as set forth in the Life Technologies' General Terms andConditions of Sale found on Life Technologies' website at/us/en/home/global/terms-andconditions.html.If you have any questions, please contactLife Technologies at /support.Product label explanation of symbols and warningsCatalogNumberBatchCodeTemperaturelimitationUsebyManufacturerConsultinstructions for useCaution, consultaccompanying documentsDISCLAIMERTO THE EXTENT ALLOWED BY LAW, LIFE TECHNOLOGIES AND/OR ITS AFFILIATE(S) WILL NOT BE LIABLE FOR SPECIAL, INCIDENTAL, INDIRECT, PUNITIVE, MULTIPLE, OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING FROM THIS DOCUMENT, INCLUDING YOUR USE OF IT. Important Licensing Information: These products may be covered by one or more Limited Use Label Licenses. By use of these products, you accept the terms and conditions of all applicable Limited Use Label Licenses.Corporate entity: Life Technologies Corporation | Carlsbad, CA 92008 USA | Toll Free in USA 1 800 955 6288©2021 Thermo Fisher Scientific Inc. All rights reserved. All trademarks are the property of Thermo Fisher Scientific and its subsidiaries unless otherwise specified.For support visit /support or contact ************************.22-Nov-21。
RHA说明书
8~12
90
325
500
2.3
RHA500—60
729
48~72
78
128
RHA800—15
800
2.3
RHA800—35
RHA1250—35 1250 Nhomakorabea1.4RHA1250—60 1250
1.4
RHA1800—20 1800
2.7
RHA1800—45 1800
2.7
RHA2500—25 2500
2.7
4.5
10400
48~72
445
750
安装螺栓： RHA125/250………………………………………M10mm
RHA500/800………………………………………M16mm RHA1250/1800/2500/4000 ………………………M20mm RHA6000/8000 …………………………………M20mm 螺栓抗拉强度：≥400N/mm2
40 Ф55 Ф47
200～230 215
150
L L-430
200～230
2〞(外径×壁厚：Ф56×4)
Ф38
阀门力臂厚度
锥度 1:10 M24×1.5
M26×1.5 左右旋螺纹
图 5d RHA4000杠杆连接器外形尺寸图
200～230 215
150
L L-430
200～230
2〞(外径×壁厚：Ф56×4)
根据所装润滑油的种类，环境温度允许采用两个范围。 标准型：-20℃～+75℃ 特殊型：-30℃～+75℃ 注：由于热效应的影响，输出功率大于或等于 75 瓦特的电机外壳应涂黑色，否则会在 使用过程中引起过热，电机也将被损坏。 RHA/RS 系列执行机构分为隔爆型和普通型两种，隔爆型可用于无腐蚀的ⅡA、ⅡB 类， 且温度组别为 T1、T2、T3 的气体环境中。 可燃性气体、蒸汽级别、温度组别举例见下表
Helena Chemical Company 产品说明书
PRECAUTIONARY STATEMENTCAUTIONBEFORE USING THIS PRODUCT, READ ALL PRECAUTIONS, DIRECTIONS FOR USE, CONDITIONS OF SALE –LIMITED WARRANTY AND LIMITATIONS OF LIABILITY AND REMEDIES.Avoid contact with formulated product. Do not take internally. Avoid contact with or inhalation of the spray mist. If product is being mixed with pesticides and/or spray adjuvants, follow all precautionary statements on the accom-panying product(s) labeling.WHAT TO DO IN CASE OF CONTACT:IF SWALLOWED:Give large amounts of water and get medical attention immediately. If vomiting occurs, keep head lower than hips to prevent aspiration.IF IN EYES:May cause irritation. Wash eyes immediately with large amounts of water. Get medical atten-tion if irritation persists.IF ON SKIN:May cause mild irritation. Remove contaminated clothing and wash exposed area with large amounts of water. Obtain medical attention if irritation persists.IF INHALED:May cause irritation. Move person to fresh air and obtain medical attention if irritation persists.If there is contact made with a spray solution containing pesticides, follow the “Statement of Practical Treatment/First Aid” on the pesticide label.GENERAL INFORMATIONNucleus ®0-0-21is a highly concentrated water-based solution of potash and oxidized sulfur useful in the correc-tion of nutritional deficiencies in plants. The unique formulation of Nucleus ®0-0-21provides a non-corrosive liquid that is stable at cold temperatures. Applications of Nucleus ®0-0-21through mixing, application, and irrigation equipment may reduce the rate and degree of corrosion that occurs when this equipment is exposed to fertilizer solu-tions. When used as directed this product does not supply all nutrients required by plants and is to supplement a soil fertility program based on soil tests.APPLICATION AND MIXING GUIDEApplication rates for general use are 2–6 gallons per acre.TURF:Apply 2 to 10 fl. ounces per 1,000 sq. ft. using 2 to 5 gallons of water per 1,000 sq ft. Use lower rate during summer applications. Apply as needed.MIXING:Nucleus ®0-0-21provides a neutral or slightly acidic pH value when diluted with water. This characteristic makes it compatible with most pesticides. In any mixing operation, Nucleus ®0-0-21should be introduced in the follow-ing sequence:1. Water2. Nucleus ®0-0-213. Other Fertilizer Products4. Pesticides5. Spray AdjuvantsCompatibility tests are always recommended prior to preparing a spray mixture of Nucleus ®0-0-21with other products.STORAGE AND DISPOSAL Keep container tightly closed and do not allow water to be introduced into it. Store in a dry place. Temperatures below 25°F may result in product crystallization. The product will readily reconstitute, however, with warmer tem-peratures and gentle agitation of the container.Do not contaminate water sources by cleaning of equipment or disposal of spray waste.Dispose of empty containers by triple rinsing with detergent solution or puncture and discard empty containers in a landfill in accordance with current local, state, and federal regulations.。
ATMX150RHA 150 nm SOI CMOS 空间用应用基于单元的ASIC说明书
ATMX150RHA Rad-Hard 150 nm SOI CMOS Cell-based ASIC for SpaceUseIntroductionATMX150RHA is a mixed-signal ASIC offer that provides high-performance and high-density solutions for space applications. With a set of pre-qualified analog IPs, such as DACs, ADCs, PLL, regulators, etc., ATMX150RHA eases the design of mixed-signal ASICs.ATMX150RHA covers the digital ATC18RHA ASIC offer and extends it up to 22 million gates. The availability of a5V to 1.8V regulator and the 5V tolerant IO permits easy re-targeting of obsolete or end-of-life ASICs with 5V core supply. In addition, the Physical Design Kit (PDK) enables customers to develop their own analog blocks and use the Microchip Space Multi-Project Wafer (SMPW) foundry services.ATMX150RHA is manufactured on a 150 nm, five-metal-layer and thick-metal-layer SOI CMOS process intendedfor use with a supply voltage of 1.8V for core and 2.5/3.3/5V for periphery. This ASIC platform is supported bya combination of state-of-the-art third-party and proprietary design tools from Synopsys®, Mentor® and Cadence®. These tools collectively form the reference tool flows for both the front and back ends.ATMX150RHA ASICs are available in several quality assurance grades, such as MIL-PRF-38535, QML-Q , QML-V, and ESCC 9000 for the digital domain:•ESCC DS: 9202/083•SMD: 5962-20B01Table of Contents Introduction (1)1.Overview (4)2.Periphery (5)2.1.Buffer Descriptions (5)2.2.I/O Clusters (5)2.3.Double Pad Ring (5)3.Core (6)3.1.Standard Cell Library (6)3.2.Memory Hard Blocks (6)3.3.Analog Blocks (6)3.4.Array Organization (7)4.Advanced Packaging (8)5.Space Multi-Project Wafer (SMPW) (9)6.Testability Techniques (10)7.Radiation Hardness (11)8.Electrical Characteristics (12)8.1.Absolute Maximum Ratings (12)8.2.Recommended Operating Conditions (12)8.3.Consumption (12)8.4. 2.5V I/O DC Characteristics (13)8.5. 3.3V I/O DC Characteristics (14)8.6.5V I/O DC Characteristics (14)8.7.PCI Characteristics (15)8.8.LVPECL Receiver Characteristics (16)8.9.LVDS Reference Characteristics (16)8.10.LVDS Transmitter Characteristics (17)8.11.LVDS Receiver Characteristics (17)9.Support (18)10.Revision History (19)The Microchip Web Site (20)Customer Change Notification Service (20)Customer Support (20)Microchip Devices Code Protection Feature (20)Legal Notice (21)Trademarks (21)Quality Management System Certified by DNV (21)Worldwide Sales and Service (22)1. OverviewThe ATMX150RHA Design Manual, available from your Microchip technical center, provides the information andflows necessary to design a mixed-signal ASIC for space applications. Users can be trained on Microchip-specific or standard commercial tool kits and methodological details for actual implementations.This offering is CMOS-technology-based, specified with 5/3.3/2.5V and HV 25-45V ranges for the periphery. Core is supplied at 1.8V.ATMX150RHA is manufactured on a 150nm, five-metal-layers SOI CMOS with Thick Metal technology option -AT77KRHA, a Microchip proprietary process. The digital ATMX150RHA is qualified under the QML-V, QML-Q, and ESCC QML. The domain of qualification covers the main features as follows.•Comprehensive library of standard logic and I/O cells•Memory Cells Compiled (ROM, SRAM, DPRAM, and Register File Memory)•450 MHz PLL (PLL400MRHA)•Up to 22 usable Mgates (equivalent NAND2)•Operating voltage 1.8±0.15V for the core and 5V±0.5V, 3.3±0.3V, 2.5±0.2V for the periphery•High-speed LVDS buffers 655 Mbps in compliance with the TIA/EIA-644-A standard•PCI buffers•Set of analog blocks•No single event latch-up below an LET threshold of 78 MeV.cm2/mg at 125°C•SEU-hardened flip-flops•TID test up to 150 krads (Si) for 1.8V and 3.3V devices, and 90 krads (Si) for 5V according to MIL-STD 883 TM1019•CCGA, CLGA, and CQFP qualified package catalog2. Periphery2.1 Buffer DescriptionsThe peripheral I/O buffer is the electrical interface between the external signals (voltage range from 2.3V to 3.6V and from 4.5V to 5.5V) and the internal core signals (from 1.65V to 1.95V).I/O libraries are:•IO5V0 I/O – Powered at 5V•IO3V3 I/O – Powered at 3.3V•IO2V5 I/O – Powered at 2.5V, 3.3V tolerantAll I/O buffers are cold sparing and include:•Bidirectional I/O buffers•Tristate-output I/O buffers•Output-only I/O buffers•Input-only I/O buffers (inverting, non-inverting, Schmitt trigger)Furthermore, the bidirectional, tristate-output and input-only I/O buffers are available with or without pull-up orpull-down structures.Specific I/O buffers have been developed in 3.3V and 2.5V:•LVDS transmitter and receiver differential I/O buffers.•LVPECL receiver differential I/O buffers•In 3.3V, PCI-compliant output bufferI/O buffers are tolerant, that is, the pad signal can be higher than VCCB when it is high impedance (input orbidirectional buffers, tristate buffers in HiZ and LVDS when disable).I/O buffers are cold sparing, that is, the pad signal can be applied when VCCB is 0V. In both cases, tolerant orcold sparing, there is no impact on core supply, buffer supply, and reliability, if the applied signal respects therecommended operating conditions, and the leakage current is less than 1µA.2.2 I/O ClustersThe periphery of the chip (pad ring) can be split into several I/O segments (I/O clusters). Some clusters can beunpowered while others are active.A specific power control line is distributed inside the cluster to force all the I/Os of the cluster in tristate moderegardless of their initial state (i.e., an output-only buffer will also be turned to HiZ mode).2.3 Double Pad RingIn case of a large number of IOs, Microchip can provide a double pad ring configuration, where the inner ring is used exclusively for core power supply pads.3. Core3.1 Standard Cell LibraryThe Microchip Standard Cell Library contains a comprehensive set of logic and storage cells, including cells thatbelong to the following categories:•Buffers and gates•Standard and SEU-hardened flip-flops•Standard and SEU-hardened scan flip-flops•Latches•Multiplexers, adders, subtractors3.2 Memory Hard BlocksThe ATMX150RHA memory libraries are developed from Virage memory compilers. All these memories aresynchronous. Four types of memories can be generated on request:•Single-port synchronous SRAM•Dual-port memory with two-port read/write synchronous SRAM•Two-port synchronous register file with one read port and one write port•ROM with metal programmingFor maximum block sizes, refer to ATMX150RHA Design Manual, available from your Microchip technical center.3.3 Analog BlocksMICROCHIP proposes a catalog of analog IPs qualified that can be delivered with a datasheet and qualpack.The qualification includes:•Electrical characterization•TID and SEE characterization•HTOL testsThe analog IPs consist of Voltage regulators, a voltage reference and monitoring device, clock synthesizer and signal conditioning IPs.For more information on a complete list of available analog blocks, please contact the Microchip technical supportteam in your region.The following table lists the preliminary IP blocks and their features.Table 3-1. Analog Blocks CatalogA Physical Design Kit (PDK), with a full set of basic devices, is also available to design custom analog blocks.3.4 Array OrganizationWith the ATMX150RHA, the die size and the package are optimized for each mixed-signal ASIC.However, for some digital designs, predefined matrix sizes and pad frames are available to ease the assembly of each individual ASIC design by using available package cavity sizes and layouts.Table 3-2. Standard Array Dimensions(*) Based on NAND2 equivalent at 50% density, without memoriesAdvanced Packaging 4. Advanced PackagingMicrochip proposes advanced multilayer low-noise CQFP and CCGA packages with isolated power and groundplanes.CQFP packages are available with up to 352 leads and CLGA/CCGA packages with up to 896 lands/columns. Inaddition to the packages listed in the following table, Microchip offers custom package development.Table 4-1. PackagesSpace Multi-Project Wafer (SMPW) 5. Space Multi-Project Wafer (SMPW)Microchip offers a Space Multi-Project Wafer (SMPW) service, in order to decrease the cost of reticles and siliconby sharing them over several designs. Specific milestones have been created to coordinate the activities and ensure that there will be no interaction between customer designs.Any questions related to the SMPW service can be addressed to your Microchip technical center.Testability Techniques 6. Testability TechniquesFor complex designs involving blocks of memory and/or cores, careful attention must be given to design-for-testtechniques. The chip size of complex designs, and the number of functional vectors that would need to be createdto exercise them fully, strongly suggests the use of more efficient techniques. Combinations of SCAN technique,multiplexed access to memory and/or core blocks, and built-in-self-test logic must be employed, in addition tofunctional test patterns, to provide both the user and Microchip the ability to test the finished product. Test at speedand transition delay fault patterns are also needed to achieve a good sorting of the dies.For further information, refer to the ATMX150RHA TOS Manual, available from your Microchip technical center.Radiation Hardness 7. Radiation HardnessThe ATMX150RHA standard cell library encompasses all the specific functions and buffers necessary for spacedesigns, such as LVDS transmitters and receivers, PCI buffers, SEU-hardened DFFs and cold sparing buffers. Keyradiation-tolerance parameters are controlled and monitored. Reports are available upon request from your Microchip technical center.Table 7-1. Radiation HardnessNotes: 1.Co-60 testing, in compliance with Mil-Std 883 TM 1019.5: Tested at 25°C, with a total dose rate of 300 rad/hand a total dose up to 150 krads (Si) or 90 krads (Si).2.Based on worst-case orbit condition (between GEO, ISS LEO, LEO POL, and MEO), at 1.65V for core and25°C.3.In worst-case conditions: 1.95V for core, 3.6V or 5.5V for I/Os at 125°C8. Electrical Characteristics8.1 Absolute Maximum Ratings8.2 Recommended Operating Conditions8.3 Consumption(*) Average on a mix of cells of different types (regular and hardened flip-flop, simple and complex boolean, multiplexer, adder, buffer and inverter).8.4 2.5V I/O DC Characteristics(*) Supplied as a design limit but not guaranteed or tested. No more than one output may be shorted at a time for a maximum duration of 10 seconds.IOSmax = 14, 28, 56, 84, 112 mA for nn = 1, 2, 4, 6, 88.5 3.3V I/O DC Characteristics(*) Supplied as a design limit but not guaranteed or tested. No more than one output may be shorted at a time for a maximum duration of 10 seconds.IOSmax = 23, 46, 92, 138,184 mA for nn = 1, 2, 4 ,6, 88.6 5V I/O DC Characteristics(*) Supplied as a design limit but not guaranteed or tested. No more than one output may be shorted at a time for a maximum duration of 10 seconds.IOSmax = 140, 420 mA for nn = 4 , 88.7 PCI Characteristics(*) Supplied as a design limit but not guaranteed or tested. No more than one output may be shorted at a time for a maximum duration of 10 seconds.8.8 LVPECL Receiver CharacteristicsDC SpecificationsApplicable over recommended operating temperature and voltage ranges unless otherwise noted.8.9 LVDS Reference CharacteristicsDC SpecificationsApplicable over recommended operating temperature and voltage ranges unless otherwise noted.8.10 LVDS Transmitter CharacteristicsDC SpecificationsApplicable over recommended operating temperature and voltage ranges unless otherwise noted.Note: *: Meet or exceed TIA/EIA-644-A standard.8.11 LVDS Receiver CharacteristicsDC SpecificationsApplicable over recommended operating temperature and voltage ranges unless otherwise noted.Note: *: Meet or exceed TIA/EIA-644-A standard.Support 9. SupportTechnical support is available by contacting *******************.com.Revision History10. Revision HistoryTable 10-1. Revision HistoryThe Microchip Web SiteMicrochip provides online support via our web site at /. This web site is used as a means to make files and information easily available to customers. Accessible by using your favorite Internet browser, the web site contains the following information:•Product Support – Data sheets and errata, application notes and sample programs, design resources, user’s guides and hardware support documents, latest software releases and archived software•General Technical Support – Frequently Asked Questions (FAQ), technical support requests, online discussion groups, Microchip consultant program member listing•Business of Microchip – Product selector and ordering guides, latest Microchip press releases, listing of seminars and events, listings of Microchip sales offices, distributors and factory representatives Customer Change Notification ServiceMicrochip’s customer notification service helps keep customers current on Microchip products. Subscribers will receive e-mail notification whenever there are changes, updates, revisions or errata related to a specified product family or development tool of interest.To register, access the Microchip web site at /. Under “Support”, click on “Customer Change Notification” and follow the registration instructions.Customer SupportUsers of Microchip products can receive assistance through several channels:•Distributor or Representative•Local Sales Office•Field Application Engineer (FAE)•Technical SupportCustomers should contact their distributor, representative or Field Application Engineer (FAE) for support. Local sales offices are also available to help customers. A listing of sales offices and locations is included in the back of this document.Technical support is available through the web site at: /supportMicrochip Devices Code Protection FeatureNote the following details of the code protection feature on Microchip devices:•Microchip products meet the specification contained in their particular Microchip Data Sheet.•Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions.•There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operatingspecifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property.•Microchip is willing to work with the customer who is concerned about the integrity of their code.•Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.”Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.ATMX150RHA Legal NoticeInformation contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights unless otherwise stated.TrademarksThe Microchip name and logo, the Microchip logo, AnyRate, AVR, AVR logo, AVR Freaks, BitCloud, chipKIT,chipKIT logo, CryptoMemory, CryptoRF, dsPIC, FlashFlex, flexPWR, Heldo, JukeBlox, KeeLoq, Kleer, LANCheck, LINK MD, maXStylus, maXTouch, MediaLB, megaAVR, MOST, MOST logo, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, PIC32 logo, Prochip Designer, QTouch, SAM-BA, SpyNIC, SST, SST Logo, SuperFlash, tinyAVR, UNI/O, and XMEGA are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. ClockWorks, The Embedded Control Solutions Company, EtherSynch, Hyper Speed Control, HyperLight Load, IntelliMOS, mTouch, Precision Edge, and Quiet-Wire are registered trademarks of Microchip Technology Incorporated in the U.S.A.Adjacent Key Suppression, AKS, Analog-for-the-Digital Age, Any Capacitor, AnyIn, AnyOut, BodyCom, CodeGuard, CryptoAuthentication, CryptoAutomotive, CryptoCompanion, CryptoController, dsPICDEM, , Dynamic Average Matching, DAM, ECAN, EtherGREEN, In-Circuit Serial Programming, ICSP, INICnet, Inter-Chip Connectivity, JitterBlocker, KleerNet, KleerNet logo, memBrain, Mindi, MiWi, motorBench, MPASM, MPF, MPLAB Certifiedlogo, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, , PICkit, PICtail, PowerSmart, PureSilicon, QMatrix, REAL ICE, Ripple Blocker, SAM-ICE, Serial Quad I/O, SMART-I.S.,SQI, SuperSwitcher, SuperSwitcher II, Total Endurance, TSHARC, USBCheck, VariSense, ViewSpan, WiperLock, Wireless DNA, and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A.Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries.GestIC is a registered trademark of Microchip Technology Germany II GmbH & Co. KG, a subsidiary of Microchip Technology Inc., in other countries.All other trademarks mentioned herein are property of their respective companies.© 2018, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved.ISBN: 978-1-5224-7889-8Quality Management System Certified by DNVISO/TS 16949Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures are for its PIC® MCUs and dsPIC® DSCs, KEELOQ®code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified.© 2021 Microchip Technology Inc. Datasheet DS60001543C-page 21Worldwide Sales and Service© 2021 Microchip Technology Inc. Datasheet DS60001543C-page 22。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
s/90° （kg） （W）
RHA125—15
125
2.9
RHA125—40
125
2.9
RHA250—10
RHA250—30
250
2.9
RHA250—70
180
12~18
39
128
180
32~48
37
57
361
8~12
45
150
3Байду номын сангаас4
24~36
39
128
368
56~84
37
57
RHA500—10
733
额定推力（N m）
角行程
2.3.2 铭牌的类别（分类）
铭牌见图 1。
电动执行机构
型号 RHA
执行标准 Q/CY 425.1
电源 220V 50Hz
额定转矩
Nm
防爆合格证编号
编号
防护等级 IP66
额定行程时间
s / 90
防爆标志 Ex dⅡBT3
制造日期
重庆川仪总厂有限公司执行器记录仪分公司
重庆北部新区川仪工业园 图 1 铭牌
１
目录
第一章 开箱检查、运输和储存………………………1 第二章 概述……………………………………………2 第三章 工作原理………………………………………4 第四章 安装……………………………………………28 第五章 尺寸和重量……………………………………34 第六章 调试……………………………………………39 第七章 使用和操作 …………………………………47 第八章 故障分析与排除………………………………49 第九章 保养、维修和更换……………………………50
RHA□－□□/□－□
D 隔爆型
KE3 (仅分体式调节型指定)
T 调节型（一体化）
无标记 S2 反馈，220V a.c.驱动
K 开关型
(D1) S2 反馈，24V d.c.有源驱动 (D2) S2 反馈，24V d.c.无源驱动
(P10) 电位器(10K)反馈，220V a.c.驱动
全行程时间（s/90°）
4.5
10400
48~72
445
750
安装螺栓： RHA125/250………………………………………M10mm
RHA500/800………………………………………M16mm RHA1250/1800/2500/4000 ………………………M20mm RHA6000/8000 …………………………………M20mm 螺栓抗拉强度：≥400N/mm2
（3） 当您更换产品的零部件或消耗品时，请采用我厂的推荐品。
n 关于本产品的免责事宜
（1） 除了在另行提供的保证书中所提及的，我厂对于产品不做任何保证； （2） 直接或非直接使用产品的过程中，因不可预见的产品缺陷对当事人造成的任何
损失，我厂不承担赔偿责任。
n 特别警示
（1） 执行机构最高处的油塞必须换成备件中提供的通气螺塞！ （2） 电缆线必须穿过备件中提供的出线套，并且旋紧！ （3） 出线罩的螺钉必须旋紧！ （4） 强烈建议使用屏蔽导线连接！
RHA2500—45 2500
2.7
RHA2500—70 2500
2.7
RHA4000—30
4000
4.5
RHA4000—70
1096 1112
1700 1700 2400 2400 3400 3400 3400
5800 5750
12~18
90
325
28~42
82
150
28~42
128
285
48~72
8~12
90
325
500
2.3
RHA500—60
729
48~72
78
128
RHA800—15
800
2.3
RHA800—35
RHA1250—35 1250
1.4
RHA1250—60 1250
1.4
RHA1800—20 1800
2.7
RHA1800—45 1800
2.7
RHA2500—25 2500
2.7
３
3.1 减速器
3.1.1 说明
参见图 2 和图 3。 2
第三章 工作原理
3
1
4
5
图 2 执行机构外型图
整个执行机构由减速器（1）、伺服电机（2）及位置发送器和伺服放大器组成。RHA500-60 另设计一单独的齿轮箱装于伺服电机与主齿轮箱之间，另需一定数量的润滑油。
伺服电机通过经油充分润滑的减速器，驱动输出轴。 电机（2）内装有制动闸，当电机断电时，它可使电机停转，作三位操作的执行机构的 电机亦如此。 在连续定位操作中，电机的转速与转向信号由电机内装的转速传感器提供。 由于电机耐堵转和放大器的作用，所以当执行机构运行到终点位置时，不需要切断电 源。 为了避免间隙的影响，输出轴通过齿盘和压簧直接驱动位置发生器。 手轮（3）总是和差动齿轮相啮合，若电源电压故障，则可用手轮来调节输出轴。
Ф38
阀门力臂厚度
锥度 1:10 M24×1.5
50
IMB6
5.0 11.5 32 31 54
IMB7
5.0 11.5 24 24.5 50
IMB8
4.6 10.3 24 22.5 50
IMV5
4.5 10.3 33 34 54
IMV6
4.5 10.7 26.5 26.5 50
最低 油面 (mm) 从观 察孔 的最 低点
RHA125-250 RHA500/800 RHA1250-2500 RHA4000 RHA6000/8000
Ф18
阀门力臂厚度
锥度 1:10 M14×1.5
M18×1.5 左右旋螺纹
图 5a RHA125/250杠杆连接器外形尺寸图
90～110 130
90
L L-200
90～110
114 〞(外径×壁厚：Ф40×3)
Ф22
阀门力臂厚度
锥度 1:10 M16×1.5
M20×1.5 左右旋螺纹
图 5b RHA500/800杠杆连接器外形尺寸图
2.2 应用范围（用途）
2.2.1 运行方式
RHA 角行程执行机构适用于连续控制、三位控制及远方遥控，每种操作方式都需要一 个分相电容器。
连续控制： 调节器信号可对执行机构进行连续调节。
三位控制： 允许连续操作，电机耐堵转。但考虑到机械磨损，建议转换频率不大于 15 次/min。
2.2.2 环境条件
在干燥的室内，避免冷凝的出现; Ø 在潮湿和有腐蚀性气体的环境中储运，必须要有合适的包装并放干燥剂，并定期检查干
燥剂是否有效。
1.3 安全须知
执行机构是驱动终端控制单元（阀门，档板等）的专用设备，广泛应用于电力、冶金、 石油、化工、建材、城市供水、污水处理等行业。
Ø 在高温环境下运行执行机构，操作人员须配载专用防护手套，以免发生由于金属部 件发热而引起的工伤事故；
Ø 根据设计目的，执行机构驱动档板、阀门单元时处于旋转运动状态，因此操作不 当会给操作人员本身带来危险；
Ø 换油过程中溢漏的润滑油应及时清理干净，避免发生事故。废油应由使用者根据 所在地实际规定妥善处理，确保不污染水源；
Ø 安装执行机构及执行机构的组态设置和电气连接，只能由专业技术人员来完成；
Ø 执行机构工作时。操作人员须严格遵守安全操作规程进行操作，确保连线正确无
请与我厂市场部联系。
n 安全使用注意事项
（1） 为了防护和确保本产品以及由本产品所控制的系统的安全，在产品的使用过程 中必须严格按本使用说明书中与安全有关的说明和注意事项操作，否则一切后 果自负，我厂概不负责。
（2） 如果独立的防护装置或安全电路要安装与本产品或本产品所控制的系统，务请 将这些电路装于本产品的外部，请勿试图对本产品进行改动或将这些电路装于 本产品的内部；
V030605
前言
感谢使用 RHA系列电动执行机构，在安装调试之前请仔细阅读本说明书。
n 关于本使用说明书
（1） 本使用说明书应交付给最终用户使用，敬请爱惜和妥善保存； （2） 在开始操作前务请仔细阅读本使用说明书以充分理解操作该产品的方法； （3） 未经许可，严禁摘录或复制本使用说明书的部分或全部内容； （4） 本使用说明书的内容如有变动恕不事先通告； （5） 在编写本使用说明书时已尽力确保其正确性，如用户发现有任何错误或遗漏，
２
第一章 开箱检查、运输和储存
1.1 开箱检查
每台执行机构在出厂之前，均经过严格检查，确保产品的质量。客户在执行机构拆箱后， 请即刻进行下列检查步骤。
Ø 检查执行机构是否在运输过程中造成损伤。 Ø 拆封后检查执行机构机种型号是否与外箱印刷资料相同。
1.2 运输与储存
Ø 运输及储存的温度为-30℃～+80℃; Ø 为了防止缩短使用期，存储温度不能经常超过 40℃，在无特殊包装的条件下，应放置
２
组别 T1
级别
T2
T3
甲烷、乙烷、丙烷、丙酮、
环己烷、戊烷、己
ⅡA
丁烷、甲醇、乙醇、丁醇、丙稀、乙
苯、苯乙烯、氯苯、甲苯、
烷、庚烷、辛烷、
烯、醋酸乙脂、醋酸戊脂、氯乙烯
一氧化碳、醋酸、氨
壬烷、癸烷、汽油
ⅡB
焦炉煤气
环氧乙烷、1.2－环氧丙烷、乙烯
四氢糠醇
2.3 执行机构的标注
2.3.1 型号编制
45
通气注油孔 通气注油孔
观察孔的 65 的 最 低 点 的 最 低 点
75
90
200
最低点
75
90
200