IEEE 论文格式
IEEE标准格式
IEEE标准格式论文题目(使用格式:论文标题)根据需要加的副标题第一隶属关系者姓名(第一作者姓名)第一行(作者隶属关系的):部、组织名称第二行:组织名称、可接受的缩写第三行:城市、国家第二联系者姓名(第二作者姓名)第一行(作者隶属关系的):部、组织名称第二行:组织名称、可接受的缩写第三行:城市、国家摘要——这个电子文档就是一个“活”的模板。
论文的各个组成部分(标题，文字，页眉等)已经被定义在格式表上，本文中将对部分内容进行介绍。
在论文的标题、摘要中不要使用特殊字符、特殊符号或者数学符号。
(摘要) 关键字——组成部分;格式;类型;样式;插入(关键字)一、引言(标题1)所有的稿件必须用英文书写。
本文中的这些准则包括字体，间距及出版论文全文的相关信息的完整描述。
请遵循这些准则，如果你有任何问题，请直接到会议出版服务(CPS)处询问负责你论文出版的编辑。
联系电话:+1(714)821-8380，传真:+1(714)761-1784。
此模板给准备论文电子版的作者提供了其所需的许多格式规范。
所有标准论文组件从三分方面指定:(1)方便个人论文规范化;(2)自觉遵守便于目前或以后出版电子稿论文的需求;(3)会议论文集中使用统一的格式、页边距、列宽、行距和内置的格式样式;该文章列举了格式样式的例子，例子在括号内用斜体字进行标注，请遵循例子的格式。
请不要重置页边距。
像多次方程、图形及表格类的论文组成部分，本文并没有给出规定，但给出了不同的图标文本类型。
有必要时可更改这些格式，并制定需要遵循的适用标准。
二、论文格式及字体无论何处用到Times字体时，都需要用Times Roman或Times New Roman字体。
如果文字处理器没有这两种字体，请选择外观与Times字体相近的字体。
应尽可能地避免使用位图字体，首选使用True-Type1或Open Type字体。
对于数学公式等，请使用公式编辑器将其插入。
三、使用说明A、选择一个模板(标题2)首先，要确保选择一个与自己论文尺寸相符的合适的模板，且该模板应符合美国论文打印的论文纸的规格。
ieee transaction 的文献格式
IEEE(Transaction)论文的文献格式IEEE(Transaction)论文是国际工程技术领域内最具影响力的学术期刊之一，其论文的撰写和格式要求较为严格。
对于研究人员来说，了解并掌握IEEE(Transaction)论文的文献格式是非常重要的，因为这关系到论文的质量和是否能够被成功发表。
下面将详细介绍IEEE(Transaction)论文的文献格式。
一、文献的引用格式在IEEE(Transaction)论文中，文献的引用格式一般采用数字标注的方式，即在论文中直接用方括号标注文献的序号，如[1]、[2]等。
这些数字标注需要按照文献在文章中出现的顺序进行编号，从1开始逐渐增加。
在文末的参考文献部分，按照顺序列出各个文献的详细信息。
二、参考文献的撰写规范1. 期刊论文的格式：[序号] 作者尊称, “文章标题,” 期刊名称, vol.卷号, no.期号, 页码, 月份年份.例如：[1] A. Smith and B. Johnson, “A novel ap proach to data analysis,” IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 25, no. 7, pp. 871-884, Jul. 2003.2. 会议论文的格式：[序号] 作者尊称, “文章标题,” 会议名称, 会议日期, 页码, 月份年份.例如：[2] C. Wang and D. Li, “A new algorithm for image recognition,” Proceedings of the 2019 IEEE International Conference on Robotics and Automation, May 20-24, 2019, pp. 355-360.3. 书籍的格式：[序号] 作者尊称, 书名, 出版地: 出版社, 年份, 页码.例如：[3] E. Brown, Introduction to Digital Signal Processing, New York: Wiley, 2010, pp. 112-115.4. 网络文献的格式：[序号] 作者尊称, “文章标题,” 全球信息站名称, 发表日期. [Online]. Av本人lable: 全球信息站. Accessed on: 访问日期.例如：[4] P. Zhang, “Advances in machine learning,” IEEE Xplore, June 15, 2020. [Online]. Av本人lable: xxx Accessed on: June 25, 2020.三、其他注意事项1. 参考文献的排列顺序应按照引用顺序进行排列。
IEEE标准格式
IEEE标准格式论文题目(使用格式:论文标题)根据需要加的副标题第一隶属关系者姓名(第一作者姓名)第一行(作者隶属关系的):部、组织名称第二行:组织名称、可接受的缩写第三行:城市、国家第二联系者姓名(第二作者姓名)第一行(作者隶属关系的):部、组织名称第二行:组织名称、可接受的缩写第三行:城市、国家摘要——这个电子文档就是一个“活”的模板。
论文的各个组成部分(标题，文字，页眉等)已经被定义在格式表上，本文中将对部分内容进行介绍。
在论文的标题、摘要中不要使用特殊字符、特殊符号或者数学符号。
(摘要) 关键字——组成部分;格式;类型;样式;插入(关键字)一、引言(标题1)所有的稿件必须用英文书写。
本文中的这些准则包括字体，间距及出版论文全文的相关信息的完整描述。
请遵循这些准则，如果你有任何问题，请直接到会议出版服务(CPS)处询问负责你论文出版的编辑。
联系电话:+1(714)821-8380，传真:+1(714)761-1784。
此模板给准备论文电子版的作者提供了其所需的许多格式规范。
所有标准论文组件从三分方面指定:(1)方便个人论文规范化;(2)自觉遵守便于目前或以后出版电子稿论文的需求;(3)会议论文集中使用统一的格式、页边距、列宽、行距和内置的格式样式;该文章列举了格式样式的例子，例子在括号内用斜体字进行标注，请遵循例子的格式。
请不要重置页边距。
像多次方程、图形及表格类的论文组成部分，本文并没有给出规定，但给出了不同的图标文本类型。
有必要时可更改这些格式，并制定需要遵循的适用标准。
二、论文格式及字体无论何处用到Times字体时，都需要用Times Roman或Times New Roman字体。
如果文字处理器没有这两种字体，请选择外观与Times字体相近的字体。
应尽可能地避免使用位图字体，首选使用True-Type1或Open Type字体。
对于数学公式等，请使用公式编辑器将其插入。
三、使用说明A、选择一个模板(标题2)首先，要确保选择一个与自己论文尺寸相符的合适的模板，且该模板应符合美国论文打印的论文纸的规格。
ieee会议论文格式
ieee会议论文格式【篇一：sci、ieee会议论文模板】paper title* (use style: paper title)subtitle as needed (paper subtitle)authors name/s per 1st affiliation (author)line 1 (of affiliation): dept. name of organization line 2-name of organization, acronyms acceptableline 3-city, countryline 4-e-mail address if desiredauthors name/s per 2nd affiliation (author)line 1 (of affiliation): dept. name of organization line 2-name of organization, acronyms acceptableline 3-city, country line 4-e-mail address if desiredabstract—this electronic document is a “live” template and already defines the components of your paper [title, text, heads, etc.] in its style sheet. *critical: do not use symbols, special characters, or math in paper title or abstract. (abstract) keywords—component; formatting; style; styling; insert (key words)i. introduction (heading 1)“word 97this template, modified in ms word 2007 and saved as a -2003 document” for the pc, provides authors with most of the formatting specifications needed for preparing electronic versions of their papers. all standard paper components have been specified for three reasons: (1) ease of use when formatting individual papers, (2) automatic compliance to electronic requirements that facilitate the concurrent or later production of electronic products, and (3) conformity of style throughout a conference proceedings. margins, column widths, line spacing, and type styles are built-in; examples of the type styles are provided throughout this document and are identified in italic type, within parentheses, following the example. some components, such as multi-leveled equations, graphics, and tables are not prescribed, although the various table text styles are provided. the formatter will need to create these components, incorporating the applicable criteria that follow.ii. ease of usea. selecting a template (heading 2)first, confirm that you have the correct template for your paper size. this template has been tailored for output on the a4 paper size. if you are using us letter-sized paper, please close thisfile and download the file “msw_usltr_format”. b. maintaining the integrity of the specificationsthe template is used to format your paper and style the text. all margins, column widths, line spaces, and text fonts are prescribed; please do not alter them. you may note peculiarities. for example, the head margin in this template measures proportionately more than is customary. this measurement and others are deliberate, using specifications that anticipate your paper as one part of the entire proceedings, identify applicable sponsor/s here. if no sponsors, delete this text box (sponsors).and not as an independent document. please do not revise any of the current designations.iii. prepare your paper before stylingbefore you begin to format your paper, first write and save the content as a separate text file. keep your text and graphic files separate until after the text has been formatted and styled. do not use hard tabs, and limit use of hard returns to only one return at the end of a paragraph. do not add any kind of pagination anywhere in the paper. do not number text heads-the template will do that for you.finally, complete content and organizational editing before formatting. please take note of the following items when proofreading spelling and grammar:a. abbreviations and acronymsdefine abbreviations and acronyms the first time they are used in the text, even after they have been defined in the abstract. abbreviations such as ieee, si, mks, cgs, sc, dc, and rms donot have to be defined. do not use abbreviations in the title or heads unless they are unavoidable.b. units? use either si (mks) or cgs as primary units. (si units are encouraged.) english units may be used as secondary units (in parentheses). an exception would be the use of english units as identifiers in trade, such as “3.5-inch disk drive.” ? avoid combining si and cgs units, such as current in amperes andmagnetic field in oersteds. this often leads to confusion because equations do not balance dimensionally. if you must use mixed units, clearly state the units for each quantity that you use in an equation. ? do not mix complete spellings and abbreviations of units: “webers/m2.“wb/m2” spell units when they appear in text: ” or “webers per square meter,” “not ...a few heies,” not “...a few h.” ? use a zero before decimal points: “0.25,” not “.25.” use “cm3,”not “cc.” (bullet list)c. equationsthe equations are an exception to the prescribed specifications of this template. you will need to determine whether or not your equation should be typed using either the times new roman or the symbol font (please no other font). to create multileveled equations, it may be necessary to treat the equation as a graphic and insert it into the text after your paper is styled.number equations consecutively. equation numbers, within parentheses, are to position flush right, as in (1), using a right tab stop. to make your equations more compact, you may use the solidus ( / ), the exp function, or appropriate exponents. italicize roman symbols for quantities and variables, but not greek symbols. use a long dash rather than a hyphen for a minus sign. punctuate equations with commas or periods when they are part of a sentence, as in ?a???b??????????note that the equation is centered using a center tab stop. be sure that the symbols in your equation have been defined befor e or immediately following “eq. (1)” or “equation (1),” except the equation. use at the beginning “(1),”of not a sentence: “equation (1) is ...”d. some common mistakes? the word “data” is plural, not singular.? the subscript for the permeability of vacuum ?other common scientific constants, is zero 0, and with subscript formatting, not a lowercase letter “o.” ? in american english, commas, semi-/colons, periods, question and exclamation marks are located within quotation marks only when a complete thought or name is cited, such as a title or full quotation. when quotation marks are used, instead of a bold oritalic typeface, to highlight a word or phrase, punctuation should appear outside of the quotation marks. a parenthetical phrase or statement at the end of a sentence is punctuated outside of the closing parenthesis (like this). (a parenthetical sentence is punctuated within the parentheses.) ? a graph within a graph is an “inset,” not an “insert.” the “alternatelyword ”alternatively (unless you i s really preferred mean something to the word that alternates). ? do “approximatelynot use ” or the “effectively.word “essentially” ” to mean ? in your paper title, if the words “that uses” can accurately replace the word using, capitalize the “u”; if not, keep using lower-cased. ? be aware of the different meaningsof the homophones “affect” and “effect,” “complement” and “compliment,” “discreet” and “discrete,” “principal” and “principle.”? do not confuse “imply” and “infer.”? the prefix “non” is not a word; it should be joined to theword it modifies, usually without a hyphen. ? there is no period after the “et” in the latin abbreviation “et al.” ? the abbreviation “i.e.” means “that is,” and the abbreviation “e.g.” means “for example.” an excellent s tyle manual for science writers is [7].iv. using the templateafter the text edit has been completed, the paper is ready for the template. duplicate the template file by using the save as command, and use the naming convention prescribed by your conference for the name of your paper. in this newly created file, highlight all of the contents and import your prepared text file. you are now ready to style your paper; use the ?scroll down ?????????????window on ????the left ????of the ms word formatting toolbar.a. authors and affiliationsthe template is designed so that author affiliations are not repeated each time for multiple authors of the same affiliation. please keep your affiliations as succinct as possible (for example, do not differentiate among departments of the same organization). this template was designed for two affiliations. 1) for author/s of only one affiliation (heading 3): to change the default, adjust the template as follows.a) selection (heading 4): highlight all author and affiliation lines.b) change number of columns: select the columns icon from the ms word standard toolbar and then select “1 column” from the selection palette.c) deletion: delete the author and affiliation lines for the second affiliation.2) for author/s of more than two affiliations: to change the default, adjust the template as follows.a) selection: highlight all author and affiliation lines. b) change number of columns: select the “columns” icon from the ms word standard toolbar and t hen select “1 column” from the selection palette.c) highlight author and affiliation lines of affiliation 1 and copy this selection.d) formatting: insert one hard return immediately after the last character of the last affiliation line. then paste down the copy of affiliation 1. repeat as necessary for each additional affiliation.e) reassign number of columns: place your cursor to the right of the last character of the last affiliation line of an even numbered affiliation (e.g., if there are five affiliations, place your cursor at end of fourth affiliation). drag the cursor up to highlight all of the above author and affiliation lines. go to column icon and select “2 columns”. if you have an oddnumber of affiliations, the final affiliation will be centered on the page; all previous will be in two columns.b. identify the headingsheadings, or heads, are organizational devices that guide the reader through your paper. there are two types: component heads and text heads.component heads identify the different components of your paper and are not topically subordinate to each other. examples include acknowledgments and references, “heading 5.” use and “figure for these, captionthe ” for correct your figure style to caption s, use is and “abstract,“table ” will require you to apply a style (in this case, italic) head” for your table title. run-in heads, such as in addition to the style provided by the drop down menu to differentiate the head from the text.text heads organize the topics on a relational, hierarchical basis. for example, the paper title is the primary text headbecause all subsequent material relates and elaborates on this one topic. if there are two or more sub-topics, the next level head (uppercase roman numerals) should be used and, conversely, if there are not at least two sub-topics, then no subheads “heading 2,should ” “heading 3,be introduced. ” and “heading 4styles named ” are prescribed. “heading 1,” c. figures and tables1) positioning figures and tables: place figures and tables at the top and bottom of columns. avoid placing them in the middle of columns. large figures and tables may span across both columns. figure captions should be below the figures; table heads should appear above the tables. insert figures and tables after they are cited in the text. use the abbreviation “fig. 1,” even at the beginning of a sentence.table i.table stylessample of a table footnote. (table footnote)b.fig. 1. example of a figure caption. (figure caption)figure labels: use 8 point times new roman for figure labels. use words rather than symbols or abbreviations when writing figure axis labels to avoid confusing the reader. as an example, “magnetization, write m,” the not just quantity “m.” if “including magnetization,units ”in the or label, present them within parentheses. do not label axes only with “magnetization (a ( m(1),units. in the example, ” not just write “magnetization “a/m.” do not label axes (a/m)” or with “temperature (k),a ratio of quantities ” not “temperature/k.and units. ”forexample, write acknowledgment (heading 5)the preferred spelling of the word “acknowledgment” in america is without an “e” after the “g.” avoid the stilted expression “one of us (r. b. g.) thanks ...”. instead, try “r. b. g. thanks...”. put sponsor acknowledgments in the unnumbered footnote on the first page.referencesthe template will number citations consecutively within brackets [1]. the sentence punctuation follows the bracket [2]. refer “ref. simply [3]” or to “reference the reference [3]” number, except at as the in [3]beginning —do not of use a sentence: “reference [3] was the first ...”number footnotes separately in superscripts. place the actual footnote at the bottom of the column in which it was cited. do not put footnotes in the reference list. use letters for table footnotes.unless there are six authors or more give all authors’ names; do not use “et al.”. papers that have not been published, even if they have been submitted for publication, should be cited as “unpublished” [4]. papers that have been accepted for publication should be cited as “in press” [5]. capitalize only the first word in a paper title, except for proper nouns and element symbols.for papers published in translation journals, please give the english citation first, followed by the original foreign-language citation [6].[1] g. eason, b. noble, and i.n. sneddon, “on certain integrals oflipschitz-hankel type involving products of bessel functions,” phil. trans. roy. soc. london, vol. a247, pp. 529-551, april 1955. (references)[2] j. clerk maxwell, a treatise on electricity and magnetism,3rd ed., vol.2. oxford: clarendon, 1892, pp.68-73.[3] i.s. jacobs and c.p. bean, “fine particles, thin films and exchangeanisotropy,” in magnetism, vol. iii, g.t. rado and h. suhl, eds. new york: academic, 1963, pp. 271-350.[4] k. elissa, “title of paper if known,” unpublished.[5] r. nicole, “title of paper with only first word capitalized,” j. namestand. abbrev., in press.[6] y. yorozu, m. hirano, k. oka, and y. tagawa, “electron spectroscopystudies on magneto-optical media and plastic substrate interface,” ieee transl. j. magn. japan, vol. 2, pp. 740-741, august 1987 [digests 9th annual conf. magnetics japan, p. 301, 1982].[7] m. young, the technical writer’s handbook. mill valley, ca: university science, 1989.【篇二：国际会议论文格式(中文)】论文题目（格式：论文题目格式）副标题（如果有的话用“副标题”格式）第一作者姓名第二作者姓名第一行：部门名称第一行部门名称第二行：组织名称，缩写词第二行：组织名称，缩写词第三行：城市，国家第三行：城市，国家第四行：电子邮件（若有要求的话）摘要—本电子文档是一个“活”的模板，论文的各个组成部分（题目，正文，标题等）已经在样式表中定义，在本文档也给出了阐明。
ieee会议论文格式
ieee会议论文格式ieee会议论文格式【篇一：sci、ieee会议论文模板】paper title* (use style: paper title)subtitle as needed (paper subtitle)authors name/s per 1st affiliation (author)line 1 (of affiliation): dept. name of organization line 2-name of organization, acronyms acceptableline 3-city, countryline 4-e-mail address if desiredauthors name/s per 2nd affiliation (author)line 1 (of affiliation): dept. name of organization line 2-name of organization, acronyms acceptableline 3-city, country line 4-e-mail address if desiredabstract—this electronic document is a “live” template and already defines the components of your paper [title, text, heads, etc.] in its style sheet. *critical: do not use symbols, special characters, or math in paper title or abstract. (abstract) keywords—component; formatting; style; styling; insert (key words)i. introduction (heading 1)“word 97this template, modified in ms word 2007 and saved as a -2003 document” for the pc, prov ides authors with most of the formatting specifications needed for preparing electronic versions of their papers. all standard paper components have been specified for three reasons: (1) ease of use when formatting individual papers, (2) automatic compliance to electronic requirements that facilitate the concurrent or later production of electronic products, and (3) conformity of style throughout aconference proceedings. margins, column widths, line spacing, and type styles are built-in; examples of the type styles are provided throughout this document and are identified in italic type, within parentheses, following the example. some components, such as multi-leveled equations, graphics, and tables are not prescribed, although the various table text styles are provided. the formatter will need to create these components, incorporating the applicable criteria that follow.ii. ease of usea. selecting a template (heading 2)first, confirm that you have the correct template for your paper size. this template has been tailored for output on the a4 paper size. if you are using us letter-sized paper, please close this file and download the file “msw_usltr_format”. b. maintaining the integrity of the specificationsthe template is used to format your paper and style the text. all margins, column widths, line spaces, and text fonts are prescribed; please do not alter them. you may note peculiarities. for example, the head margin in this template measures proportionately more than is customary. this measurement and others are deliberate, using specifications that anticipate your paper as one part of the entire proceedings, identify applicable sponsor/s here. if no sponsors, delete this text box (sponsors).and not as an independent document. please do not revise any of the current designations.iii. prepare your paper before stylingbefore you begin to format your paper, first write and save the content as a separate text file. keep your text and graphic files separate until after the text has been formatted and styled. do not use hard tabs, and limit use of hard returns to only one returnat the end of a paragraph. do not add any kind of pagination anywhere in the paper. do not number text heads-the template will do that for you.finally, complete content and organizational editing before formatting. please take note of the following items when proofreading spelling and grammar:a. abbreviations and acronymsdefine abbreviations and acronyms the first time they are used in the text, even after they have been defined in the abstract. abbreviations such as ieee, si, mks, cgs, sc, dc, and rms do not have to be defined. do not use abbreviations in the title or heads unless they are unavoidable.b. unitsuse either si (mks) or cgs as primary units. (si units are encouraged.) english units may be used as secondary units (in parentheses). an exception would be the use of english units as identifiers in trade, such as “3.5-inch disk drive.” ? avoid combining si and cgs units, such as current in amperes and magnetic field in oersteds. this often leads to confusion because equations do not balance dimensionally. if you must use mixed units, clearly state the units for each quantity that you use in an equation. ? do not mix complete spellings and abbreviations of units: “webers/m2.“wb/m2” spell units when they appear in text: ” or “webers per square meter,” “not ...a few heies,” not “...a few h.” ? use a zero before decimal points: “0.25,” not “.25.” use “cm3,”not “cc.” (bullet list)c. equationsthe equations are an exception to the prescribed specifications of this template. you will need to determine whether or not your equation should be typed using either thetimes new roman or the symbol font (please no other font). to create multileveled equations, it may be necessary to treat the equation as a graphic and insert it into the text after your paper is styled.number equations consecutively. equation numbers, within parentheses, are to position flush right, as in (1), using a right tab stop. to make your equations more compact, you may use the solidus ( / ), the exp function, or appropriate exponents. italicize roman symbols for quantities and variables, but not greek symbols. use a long dash rather than a hyphen for a minus sign. punctuate equations with commas or periods when they are part of a sentence, as in ?abnote that the equation is centered using a center tab stop. be sure that the symbols in your equation have been defined befor e or immediately following “eq. (1)” or “equation (1),” except the equation. use at the beginning “(1),”of not a sentence: “equation (1) is ...”d. some common mistakesthe word “data” is plural, not singular.the subscript for the permeability of vacuum ?other common scientific constants, is zero 0, and with subscript formatting, not a lowe rcase letter “o.” ? in american english, commas, semi-/colons, periods, question and exclamation marks are located within quotation marks only when a complete thought or name is cited, such as a title or full quotation. when quotation marks are used, instead of a bold oritalic typeface, to highlight a word or phrase, punctuation should appear outside of the quotation marks. a parentheticalphrase or statement at the end of a sentence is punctuated outside of the closing parenthesis (like this). (a parenthetical sentence is punctuated within the parentheses.) ? a graph within a graph is an “inset,” not an “insert.” the “alternatelyword ”alternatively (unless you i s really preferred mean something to the word that alternates). ? do “approximatelynot use ” or the “effectively.word “essentially” ” to mean ? in your paper title, if the words “that uses” can accurately replace the word using, capitalize the “u”; if not, keep using lower-cased. ? be aware of the different meaningsof the homophones “affect” and “effect,” “complement” and “compliment,” “discreet” and “discrete,” “principal” and “principle.”do not confuse “imply” and “infer.”the prefix “non” is not a word; it should be joined to theword it modifies, usually without a hyphen. ? there is no period a fter the “et” in the latin abbreviation “et al.” ? the abbreviation “i.e.” means “that is,” and the abbreviation “e.g.” means “for example.” an excellent s tyle manual for science writers is [7].iv. using the templateafter the text edit has been completed, the paper is ready for the template. duplicate the template file by using the save as command, and use the naming convention prescribed by your conference for the name of your paper. in this newly created file, highlight all of the contents and import your prepared text file. you are now ready to style your paper; use the ?scroll down window on ????the left ????of the ms word formatting toolbar.a. authors and affiliationsthe template is designed so that author affiliations are not repeated each time for multiple authors of the same affiliation. please keep your affiliations as succinct as possible (for example, do not differentiate among departments of the same organization). this template was designed for two affiliations. 1) for author/s of only one affiliation (heading 3): to change the default, adjust the template as follows.a) selection (heading 4): highlight all author and affiliation lines.b) change number of columns: select the columns icon from the ms word standard toolba r and then select “1 column” from the selection palette.c) deletion: delete the author and affiliation lines for the second affiliation.2) for author/s of more than two affiliations: to change the default, adjust the template as follows.a) selection: highlight all author and affiliation lines. b) change number of columns: select the “columns” icon from the ms word standard toolbar and t hen select “1 column” from the selection palette.c) highlight author and affiliation lines of affiliation 1 and copy this selection.d) formatting: insert one hard return immediately after the last character of the last affiliation line. then paste down the copy of affiliation 1. repeat as necessary for each additional affiliation.e) reassign number of columns: place your cursor to the right of the last character of the last affiliation line of an even numbered affiliation (e.g., if there are five affiliations, place your cursor at end of fourth affiliation). drag the cursor up to highlightall of the above author and affiliation lines. go to column icon and select “2 columns”. if you have an oddnumber of affiliations, the final affiliation will be centered on the page; all previous will be in two columns.b. identify the headingsheadings, or heads, are organizational devices that guide the reader through your paper. there are two types: component heads and text heads.component heads identify the different components of your paper and are not topically subordinate to each other. examples include acknowledgments and refer ences, “heading 5.” use and “figure for these, captionthe ” for correct your figure style to caption s, use is and “abstract,“table ” will require you to apply a style (in this case, italic) head” for your table title. run-in heads, such as in addition to the style provided by the drop down menu to differentiate the head from the text.text heads organize the topics on a relational, hierarchical basis. for example, the paper title is the primary text head because all subsequent material relates and elaborates on this one topic. if there are two or more sub-topics, the next level head (uppercase roman numerals) should be used and, conversely, if there are not at least two sub-topics, then no subheads “heading 2,should ” “heading 3,be introduced. ” and “heading 4styles named ” are prescribed. “heading 1,” c. figures and tables1) positioning figures and tables: place figures and tables at the top and bottom of columns. avoid placing them in the middle of columns. large figures and tables may span across both columns. figure captions should be below the figures; table heads should appear above the tables. insert figures and tables afterthey are cited in the text. use the abbreviation “fig. 1,” even at the beginning of a sentence.table i.table stylessample of a table footnote. (table footnote)b.fig. 1. example of a figure caption. (figure caption)figure labels: use 8 point times new roman for figure labels. use words rather than symbols or abbreviations when writing figure axis labels to avoid confusing the reader. as an example, “magnetization, write m,” the not just quantity “m.” if “including magnetization,units ”in the or label, present them within parentheses. do not label axes only with “magnetization (a ( m(1),units. in the example, ” not just write “m agnetization “a/m.” do not label axes (a/m)” or with “temperature (k),a ratio of quantities ” not “temperature/k.and units. ”for example, write acknowledgment (heading 5)the preferred spelling of the word “acknowledgment” in america is without an “e” after the “g.” avoid the stilted expression “one of us (r. b. g.) thanks ...”. instead, try “r. b. g. thanks...”. put sponsor acknowledgments in the unnumbered footnote on the first page.referencesthe template will number citations consecutively within brackets [1]. the sentence punctuation follows the bracket [2]. refer “ref. simply [3]” or to “reference the reference [3]” number, except at as the in [3]beginning —do not of use a sentence: “reference [3] was the first ...”number footnotes separately in superscripts. place the actual footnote at the bottom of the column in which it was cited. donot put footnotes in the reference list. use letters for table footnotes.unless there are six authors or more give all authors’ names; do not use “et al.”. pape rs that have not been published, even if they have been submitted for publication, should be cited as “unpublished” [4]. papers that have been accepted for publication should be cited as “in press” [5]. capitalize only the first word in a paper title, except for proper nouns and element symbols.for papers published in translation journals, please give the english citation first, followed by the original foreign-language citation [6].[1] g. eason, b. noble, and i.n. sneddon, “on certain integrals oflipschitz-hankel type involving products of bessel functions,” phil. trans. roy. soc. london, vol. a247, pp. 529-551, april 1955. (references)[2] j. clerk maxwell, a treatise on electricity and magnetism,3rd ed., vol.2. oxford: clarendon, 1892, pp.68-73.[3] i.s. jacobs and c.p. bean, “fine particles, thin films and exchangeanisotropy,” in magnetism, vol. iii, g.t. rado and h. suhl, eds. new york: academic, 1963, pp. 271-350.[4] k. elissa, “title of paper if known,” unpublished.[5] r. nicole, “title of paper with only first word capitalized,” j. namestand. abbrev., in press.[6] y. yorozu, m. hirano, k. oka, and y. tagawa, “electronspectroscopystudies on magneto-optical media and plastic substrate interface,” ieee transl. j. magn. japan, vol. 2, pp. 740-741, august 1987 [digests 9th annual conf. magnetics japan, p. 301, 1982].[7] m. young, the technical writer’s handbook. mill valley, ca: university science, 1989.【篇二：国际会议论文格式(中文)】论文题目（格式：论文题目格式）副标题（如果有的话用“副标题”格式）第一作者姓名第二作者姓名第一行：部门名称第一行部门名称第二行：组织名称，缩写词第二行：组织名称，缩写词第三行：城市，国家第三行：城市，国家第四行：电子邮件（若有要求的话）摘要—本电子文档是一个“活”的模板，论文的各个组成部分（题目，正文，标题等）已经在样式表中定义，在本文档也给出了阐明。
ieee 文献格式
ieee 文献格式IEEE（Institute of Electrical and Electronics Engineers）是一个国际性的电子技术与信息科学工程师协会，它制定了一套文献格式标准，用于在学术论文、技术报告等中引用参考文献。
以下是IEEE参考文献格式的标准格式：1.书籍：作者姓名. 书名. 出版地：出版社名称，出版年份.例如：Smith, J.A. Introduction to Electronics. New York: John Wiley & Sons, 2001.2.期刊文章：作者姓名. 文章标题. 期刊名，卷号（年份），页码范围.例如：Johnson, L.A.B. “Quantum Theory and Nanotechnology.”Journal of Microelectronics and Microsystems, vol. 15 (2014), pp. 123-135.3.会议论文：作者姓名. 论文标题. 会议名，会议日期，会议地点.例如：Doe, J. “Advanced Semiconductor Devices.”Proc. of the International Conference on Solid State Devices and Materials, September 20-23, 1998, New York.4.技术报告：作者姓名. 技术报告标题. 报告编号（年份）.例如：Robinson, R. “Design of an Optical Communication System.”TR 2018-07, 2018.以上是IEEE参考文献格式的基本格式，具体的格式要求可能会根据不同的出版物或学术机构有所不同。
因此，在撰写论文或报告时，最好仔细阅读相关的引用规范，以确保文献引用格式的正确性。
ieee论文格式模板
ieee论文格式模板下面是由整理的ieee论文格式模板，谢谢你的阅读。
ieee论文格式模板1、题目：应简洁、明确、有概括性，字数不宜超过20个字。
2、摘要：要有高度的概括力，语言精练、明确，中文摘要约100—200字;3、关键词：从论文标题或正文中挑选3～5个最能表达主要内容的词作为关键词。
4、目录：写出目录，标明页码。
5、正文：论文正文字数一般应在3000字以上。
论文正文：包括前言、本论、结论三个部分。
前言(引言)是论文的开头部分，主要说明论文写作的目的、现实意义、对所研究问题的认识，并提出论文的中心论点等。
前言要写得简明扼要，篇幅不要太长。
本论是论文的主体，包括研究内容与方法、实验材料、实验结果与分析(讨论)等。
在本部分要运用各方面的研究方法和实验结果，分析问题，论证观点，尽量反映出自己的科研能力和学术水平。
结论是论文的收尾部分，是围绕本论所作的结束语。
其基本的要点就是总结全文，加深题意。
6、谢辞：简述自己通过做论文的体会，并应对指导教师和协助完成论文的有关人员表示谢意。
7、参考文献：在论文末尾要列出在论文中参考过的专著、论文及其他资料，所列参考文献应按文中参考或引证的先后顺序排列。
8、注释：在论文写作过程中，有些问题需要在正文之外加以阐述和说明。
9、附录：对于一些不宜放在正文中，但有参考价值的内容，可编入附录中。
关于ieee的论文范文基于ATmega128的IEEE标准电脑鼠硬件设计与实现[关键词]电脑鼠;ATmega128 红外传感器迷宫中图分类号：TP393.08 文献标识码：A 文章编号：1009-914X(2016)01-0276-01引言“IEEE标准电脑鼠走迷宫竞赛(IEEE Micromouse ComPetition)，采用微控制器制作电脑鼠，设计相应的算法和程序，按照IEEE国际竞赛标准进行竞赛[1]。
该竞赛在国际上已开展了30多年，不少高校还开设了相应课程。
它可以在“迷宫中自动感知并记忆迷宫地图，通过一定的算法寻找一条最佳路径，以最快的速度到达目的地。
ieee论文格式中文版
ieee论文格式中文版IEEE现有42个主持标准化工作的专业学会或者委员会。
下面是由店铺整理的ieee论文格式，谢谢你的阅读。
ieee论文格式一、封面题目：小二号黑体加粗居中。
各项内容：四号宋体居中。
二、目录目录：二号黑体加粗居中。
章节条目：五号宋体。
行距：单倍行距。
三、论文题目：小一号黑体加粗居中。
四、中文摘要1、摘要：小二号黑体加粗居中。
2、摘要内容字体：小四号宋体。
3、字数：300字左右。
4、行距：20磅5、关键词：四号宋体，加粗。
词3-5个，每个词间空一格。
五、英文摘要1、ABSTRACT：小二号 Times New Roman.2、内容字体：小四号 Times New Roman.3、单倍行距。
4、Keywords：四号加粗。
词3-5个，小四号Times New Roman. 词间空一格。
六、绪论小二号黑体加粗居中。
内容500字左右，小四号宋体，行距：20磅七、正文(一)正文用小四号宋体(二)安保、管理类毕业论文各章节按照一、二、三、四、五级标题序号字体格式章：标题小二号黑体，加粗，居中。
节：标题小三号黑体，加粗，居中。
一级标题序号如：一、二、三、标题四号黑体，加粗，顶格。
二级标题序号如：(一)(二)(三) 标题小四号宋体，不加粗，顶格。
三级标题序号如：1.2.3. 标题小四号宋体，不加粗，缩进二个字。
四级标题序号如：(1)(2)(3) 标题小四号宋体，不加粗，缩进二个字。
五级标题序号如：①②③ 标题小四号宋体，不加粗，缩进二个字。
医学、体育类毕业论文各章序号用阿拉伯数字编码，层次格式为：1××××(小2号黑体，居中)××××××××××××××(内容用4号宋体)。
1.1××××(3号黑体，居左)×××××××××××××(内容用4号宋体)。
ieee英文论文格式.doc
ieee 英文论文格式【篇一：ieee 英文论文格式模板】preparation of papers for ieee transactions and journals (march2005)first a. author, second b. author, jr., and third c. author,member, ieee?abstract —these instructions give you guidelines for preparingpapers for ieee transactions and journals. use this documentas a template if you are using microsoft word 6.0 or later.otherwise, use this document as an instruction set. theelectronic file of your paper will be formatted further at ieee.define all symbols used in the abstract. do not cite referencesin the abstract. do not delete the blank line immediately abovethe abstract; it sets the footnote at the bottom of this column.point and either use insert | picture | from file or copy theimage to the windows clipboard and then edit | paste special |picture (with ―float over text ‖unchecked).ieee will do the final formatting of your paper. if your paper isintended for a conference, please observe the conference pagelimits.ii. procedure for paper submission a. review stageplease check with your editor on whether to submit yourmanuscript by hard copy or electronically for review. if hardcopy, submit photocopies such that only one column appearsper page. this will give your referees plenty of room to writecomments. send the number of copies specified by your editor(typically four). if submitted electronically, find out if youreditor prefers submissions on disk or as e-mail attachments. ifyou want to submit your file with one column electronically,please do the following:--first, click on the view menu and choose print layout. --second, place your cursor in the first paragraph. go to theformat menu, choose columns, choose one column layout, andchoose ―apply to whole document ‖from the dropdown menu.--third, click and drag the right margin bar to just over 4inches in width.the graphics will stay in the ―second‖column, but you can drag them to the first column. make the graphic wider to pushout any text that may try to fill in next to the graphic.b. final stagewhen you submit your final version, after your paper has been accepted, print it in two-column format, including figures andtables. send three prints of the paper; two will go to ieee andone will be retained by the editor-in-chief or conferencepublications chair.you must also send your final manuscript on a disk, whichieee will use to prepare your paper for publication. write theauthors ’names on the disk la bel. if you are using a macintosh, please save your file on a pc formatted disk, if possible. youmay use zip or cd-rom disks for large files, or compress filesusing compress, pkzip, stuffit, or gzip.also send a sheet of paper with complete contact informationfor all authors. include full mailing addresses, telephonenumbers, fax numbers, and e-mail addresses. this informationwill be used to send each author a complimentary copy of the1index terms —about four key words or phrases in alphabetical order, separated by commas. for a list of suggested keywords,send a blank e-mail to or visit the ieee web site ati. introduction this document is a template for microsoft word versions 6.0 orlater. if you are reading a paper version of this document,please download the electronic file, trans-jour.doc, from soyou can use it to prepare your manuscript. if you would preferto use latex, download ieee ’s latex style and sample files from the same web page. use these latex files for formatting, butplease follow the instructions in trans-jour.doc or trans-jour.pdf.if your paper is intended for a conference, please contact your conference editor concerning acceptable word processorformats for your particular conference.when you open trans-jour.doc, se lect ―page layout ‖from the ―view ‖menu in the menu bar (view | page layout), which allows you to see the footnotes. then type over sections oftrans-jour.doc or cut and paste from another document andthen use markup styles. the pull-down style menu is at the leftof the formatting toolbar at the top of your word window (forexample, the style at this point in the document is ―text ‖). highlight a section that you want to designate with a certainstyle, then select the appropriate name on the style menu. thestyle will adjust your fonts and line spacing. do not change thefont sizes or line spacing to squeeze more text into a limitednumber of pages. use italics for emphasis; do not underline.to insert images in word, position the cursor at the insertionthis work was supported by national science council, taipei,taiwan, r.o.c. project no. nsc xx-xxxx-x-xxx-xxx..journal in which the paper appears. in addition, designate oneauthor as the ―corresponding author. ‖this is the author towhom proofs of the paper will be sent. proofs are sent to thecorresponding author only.fonts when creating your figures, if possible.4) other ways: experienced computer users can convertfigures and tables from their original format to tiff. some usefulimage converters are adobe photoshop, corel draw, andmicrosoft photo editor, an application that is part of microsoftc. figuresoffice 97 and office 2000 (look for c:program filescommonall tables and figures will be processed as images. however,files microsoft shared photoed photoed.exe. (you may ieeecannot extract the tables and figures embedded in have tocustom-install photo editor from your original office yourdocument. (the figures and tables you insert in your disk.)document are only to help you gauge the size of your paper,for here is a way to make tiff image files of tables. first, createthe convenience of the referees, and to make it easy for you toyour table in word. use horizontal lines but no vertical lines.distribute preprints.) therefore, submit, on separate sheets ofhide gridlines (table | hide gridlines). spell check the table topaper, enlarged versions of the tables and figures that removeany red underlines that indicate spelling errors. adjust appearin your document. these are the images ieee will magnification(view | zoom) such that you can view the entire scan andpublish with your paper. table at maximum area when youselect view | full screen.move the cursor so that it is out of the way. press ―print screen ‖ d. electronic image files (optional)you will have the greatest control over the appearance of onyour keyboard; this copies the screen image to the windowsyour figures if you are able to prepare electronic image files. ifclipboard. open microsoft photo editor and click edit | paste asyou do not have the required computer skills, just submitpaper new image. crop the table image (click select button;select thepart you want, then image | crop). adjust the properties of theprints as described above and skip this section.1) easiest way: if you have a scanner, the best and quickestimage (file | properties) to monochrome (1 bit) and 600 pixelsway to prepare noncolor figure files is to print your tables andper inch. resize the image (image | resize) to a width of 3.45figures on paper exactly as you want them to appear, scanthem, inches. save the file (file | save as) in tiff with no andthen save them to a file in postscript (ps) or encapsulatedcompression (click ―more‖button).most graphing programs allow you to save graphs in tiff;postscript (eps) formats. use a separate file for each image.however, you often have no control over compression or filenames should be of the form ―fig1.ps ‖or ―fig2.eps. ‖2) slightly harder way: using a scanner as above, save thenumber of bits per pixel. you should open these image files ina images in tiff format. high-contrast line figures and tablesprogram such as microsoft photo editor and re-save themusing should be prepared with 600 dpi resolution and savedwith no no compression, either 1 or 8 bits, and either 600 or220 dpi compression, 1 bit per pixel (monochrome), with filenames of resolution (file | properties; image | resize). seesection ii- d2 the form ―fig3.tif ‖or ―table1.tif. ‖to obtain a 3.45-in figure for an explanation of number of bits andresolution. if your (one-column width) at 600 dpi, the figurerequires a horizontal graphing program cannot export to tiff,you can use the same size of 2070 pixels. typical file sizes willbe on the order of 0.5 technique described for tables in theprevious paragraph.a way to convert a figure from windows metafile (wmf) to mb.photographs and grayscale figures should be prepared withtiff is to paste it into microsoft powerpoint, save it in jpg 220dpi resolution and saved with no compression, 8 bits performat, open it with microsoft photo editor or similar converter,pixel (grayscale). to obtain a 3.45-in figure (one-column width)and re-save it as tiff.microsoft excel allows you to save spreadsheet charts in at220 dpi, the figure should have a horizontal size of 759 pixels.color figures should be prepared with 400 dpi resolution andgraphics interchange format (gif). to get good resolution,saved with no compression, 8 bits per pixel (palette or 256make the excel charts very large. then use the ―save ascolor). to obtain a 3.45-in figure (one column width) at 400 dpi,the figure should have a horizontal size of 1380 pixels.for more information on tiff files, please go to and click on thelink ―guidelines for author supplied electronic text andgraphics. ‖3) somewhat harder way: if you do not have a scanner, youmay create noncolor postscript figures by ―printing ‖them to files. first, download a postscript printer driver from (forwindows) or from (for macintosh) and install the ―generic postscript printer ‖definition. in word, paste your figure into anew document. print to a file using the postscript printer driver.file names should be of the form ―fig5.ps. ‖use adobe type 1 2fig. 1. magnetization as a function of applied field. notethat ―fig. ‖is abbreviated. there is a period after the figure number, followed by two spaces. it is good practice to explainthe significance of the figure in the caption.html ‖feature (see ). you can then convert from gif to tiff usingmicrosoft photo editor, for example.no matter how you convert your images, it is a good idea toprint the tiff files to make sure nothing was lost in theconversion.if you modify this document for use with other ieee journals or conferences, you should save it as type ―w o r d-2907006.0/95- rtf (*.doc) ‖so that it can be opened by any version of word.e. copyright forman ieee copyright form should accompany your finalsubmission. you can get a .pdf, .html, or .doc version at orfrom the first issues in each volume of the ieee transactionsand journals. authors are responsible for obtaining anysecurity clearances.iii. mathif you are using word, use either the microsoft equation editoror the mathtype add-on () for equations in your paper (insert |object | create new | microsoft equation or mathtypeequation). ―float over text ‖should not be selected.iv. unitsuse either si (mks) or cgs as primary units. (si units arestrongly encouraged.) english units may be used as secondaryunits (in parentheses). this applies to papers in data storage.for example, write ―15 gb/cm2 (100 gb/in2). ‖an exception is when engli sh units are used as identifiers in trade, such as ―3? in disk drive. ‖avoid combining si and cgs units, such ascurrent in amperes and magnetic field in oersteds. this oftenleads to confusion because equations do not balance3units for each quantity in an equation.v. helpful hintsa. figures and tablesbecause ieee will do the final formatting of your paper, you donot need to position figures and tables at the top and bottomof each column. in fact, all figures, figure captions, and tablescan be at the end of the paper. large figures and tables mayspan both columns. place figure captions below the figures;place table titles above the tables. if your figure has two parts,include the labels ―(a) ‖and ―(b) ‖as part of the artwork. please verify that the figures and tables you mention in the textactually exist. please do not include captions as part of thefigures. do not put captions in “text boxes ”linked to the figures. do not put borders around the outside of your figures.use the abbreviation ―fig. ‖even at the beginning of a sentence. do not abbreviate ―table. ‖tables are numbered with roman numerals.color printing of figures is available, but is billed to theauthors (approximately $1300, depending on the number offigures and number of pages containing color). include a note。
ieee论文格式要求应用中文版格式
ieee论文格式要求应用中文版格式一、封面题目：小二号黑体加粗居中。
各项内容：四号宋体居中。
二、目录目录：二号黑体加粗居中。
章节条目：五号宋体。
行距：单倍行距。
三、论文题目：小一号黑体加粗居中。
四、中文摘要1、摘要：小二号黑体加粗居中。
2、摘要内容字体：小四号宋体。
3、字数：300字左右。
4、行距：20磅5、关键词：四号宋体，加粗。
词3-5个，每个词间空一格。
五、英文摘要1、ABSTRACT：小二号TimesNewRoman.2、内容字体：小四号TimesNewRoman.3、单倍行距。
4、Keywords：四号加粗。
词3-5个，小四号TimesNewRoman.词间空一格。
六、绪论小二号黑体加粗居中。
内容500字左右，小四号宋体，行距：20磅七、正文(一)正文用小四号宋体章：标题小二号黑体，加粗，居中。
节：标题小三号黑体，加粗，居中。
一级标题序号如：一、二、三、标题四号黑体，加粗，顶格。
二级标题序号如：(一)(二)(三)标题小四号宋体，不加粗，顶格。
三级标题序号如：1.2.3.标题小四号宋体，不加粗，缩进二个字。
四级标题序号如：(1)(2)(3)标题小四号宋体，不加粗，缩进二个字。
五级标题序号如：①②③标题小四号宋体，不加粗，缩进二个字。
(三)表格每个表格应有自己的表序和表题，表序和表题应写在表格上方正中。
表序后空一格书写表题。
表格允许下页接续写，表题可省略，表头应重复写，并在右上方写“续表××”。
(四)插图(五)论文中的图、表、公式、算式等，一律用阿拉伯数字分别依序连编编排序号。
序号分章依序编码，其标注形式应便于互相区别，可分别为：图2.1、表3.2、公式(3.5)等。
文中的阿拉伯数字一律用半角标示。
八、结束语小二号黑体加粗居中。
内容300字左右，小四号宋体，行距：20磅。
九、致谢小二号黑体加粗居中。
内容小四号宋体，行距：20磅十、参考文献(一)小二号黑体加粗居中。
内容8—10篇，五号宋体，行距：20磅。
ieee format 英文paper格式
ieee format 英文paper格式
IEEE (Institute of Electrical and Electronics Engineers) 格式是一种常用的学术论文格式，尤其在电气工程和计算机科学领域。
以下是一个基本的IEEE英文论文格式模板：
Title Page
标题：简短、明确，反映论文主题。
作者：所有作者的全名和所属单位。
所属单位：作者的学校或工作单位。
摘要：简短地概括论文的主要内容和结果。
关键词：列出3-5个关键词，反映论文主题。
Main Body
1. Introduction
研究背景
研究目的和问题陈述
研究范围和限制
2. Related Work
回顾相关研究和背景知识
当前研究的起点和位置
3. Methodology
描述研究方法或技术路径
详细解释实验设计或实施过程
4. Results and Discussion
呈现实验结果或研究数据
结果分析和讨论
5. Conclusion
总结研究成果和发现
指出研究局限性和未来工作方向References
按照IEEE的引用格式列出所有参考的文献。
Appendix (可选)
提供额外的数据、图表或详细信息。
每个部分都有其特定的格式要求，例如标题、作者、页码等。
在撰写论文时，请确保遵循IEEE的格式指南，并使用适当的引用格式。
ieee文献格式
ieee文献格式
IEEE（Institute of Electrical and Electronics Engineers）文献格式通常遵循以下格式：
1. 作者姓名：在作者姓名的书写上，通常先写名，再写姓。
当有多位作者时，一般只写前三个作者，其他作者用“et al.”表示。
如果只有一个作者，则
在作者名字前加上“and”，后面不再加“et al.”。
2. 文章标题：标题应该用斜体表示，并使用合适的字体和字号。
标题应该简短明了，能够概括文章的主要内容。
3. 期刊名称：期刊名称应该用斜体表示，并使用合适的字体和字号。
如果期刊名称太长，可以使用缩写来表示。
4. 卷号、期号和页码：卷号、期号和页码是引用文献的重要信息，应该按照“vol. <卷号>, no. <期号>, pp. <起始页码-终止页码>”的格式书写。
5. 年份：年份应该用阿拉伯数字表示，并在数字后面加上圆括号。
以下是一个IEEE文献格式的示例：
[1] A. B. C, "Title of the paper," IEEE Transactions on Signal Processing, vol. 99, no. 3, pp. 45-50, 2012.。
IEEE论文格式要求
IEEE论文格式要求
IEEE（Institute of Electrical and Electronics Engineers）是一个国际性的专业学术组织，主要关注电子和电气工程领域的科学、工程和技术发展。
IEEE发表的论文通常涵盖了这些领域内的最新研究成果和技术创新。
下面是IEEE论文格式的要求：
1.页面设置：
-页面尺寸：A4纸张
-上、下、左、右边距：2.54厘米（1英寸）
-单倍行距
2.标题：
-论文标题位于页面顶部，居中，字体大小为17点
-使用粗体和大写字母书写标题
4.摘要和关键词：
-摘要正文内容紧跟在标题下方，字体大小为10点
-摘要内容应包括研究的目的、方法、主要结果和结论，并尽量简明扼要
-摘要下方是关键词，关键词之间使用逗号分隔。
IEEE模板范文
IEEE模板范文
1. 文字格式：IEEE模板要求使用两栏排版，采用Times New Roman 字体，保持12号字体大小。
论文标题要使用14号字体，加粗字体显示。
3.章节结构：IEEE模板的论文结构通常包括序言、主体和结论三个部分。
序言部分简单介绍研究背景和意义；主体部分详细叙述研究方法、实验与分析等内容；结论部分进行总结和展望。
5.图表制作：IEEE模板要求图表使用矢量图形，避免使用位图。
图表标题要求居中显示，详尽描述图表的内容和含义。
6. 公式书写：IEEE模板要求使用MathType等软件编写数学公式，并进行编号和居中。
同时，公式的每个符号都需要在定义之前进行解释。
ieee的参考文献格式
ieee的参考文献格式IEEE（Institute of Electrical and Electronics Engineers）参考文献格式是一种常用的学术引用格式，主要用于工程技术领域的论文和期刊。
下面我将从多个角度全面介绍IEEE参考文献格式。
一、期刊文章的引用格式：[1] A. N. Other, “Title of article,” Abbrev. Title of Journal, vol. x, no. x, pp. xxx-xxx, Abbrev. Month, year.二、会议论文的引用格式：[2] A. N. Other, “Title of paper,” in Abbrev. Titleof Conf., City of Conf., Abbrev. State, year, pp. xxx-xxx.三、图书的引用格式：[3] A. N. Other, Title of Book. City of Publisher,(only U.S. State), Country: Publisher, year.四、网站文章的引用格式：[4] A. N. Other, “Title of article,” Title of Journal, vol. x, no. x, pp. xxx-xxx, Abbrev. Month, year. Available: site. Accessed on: Month day, year.五、专利的引用格式：[5] A. N. Other, “Title of patent,” Patent x xxx xxx, Abbrev. Month, day, year.六、学位论文的引用格式：[6] A. N. Other, “Title of thesis,” M.S. thesis, Abbrev. Dept., Abbrev. Univ., City of Univ., Abbrev. State, year.以上是IEEE参考文献格式的一些常见类型，每种类型都有特定的引用格式要求。
ieee论文格式
ieee论文格式IEEE已发展成为具有较大影响力的国际学术组织。
下面是由店铺整理的ieee论文格式，谢谢你的阅读。
ieee论文格式1、题目：应简洁、明确、有概括性，字数不宜超过20个字。
2、摘要：要有高度的概括力，语言精练、明确，中文摘要约100—200字;3、关键词：从论文标题或正文中挑选3～5个最能表达主要内容的词作为关键词。
4、目录：写出目录，标明页码。
5、正文：论文正文字数一般应在3000字以上。
论文正文：包括前言、本论、结论三个部分。
前言(引言)是论文的开头部分，主要说明论文写作的目的、现实意义、对所研究问题的认识，并提出论文的中心论点等。
前言要写得简明扼要，篇幅不要太长。
本论是论文的主体，包括研究内容与方法、实验材料、实验结果与分析(讨论)等。
在本部分要运用各方面的研究方法和实验结果，分析问题，论证观点，尽量反映出自己的科研能力和学术水平。
结论是论文的收尾部分，是围绕本论所作的结束语。
其基本的要点就是总结全文，加深题意。
6、谢辞：简述自己通过做论文的体会，并应对指导教师和协助完成论文的有关人员表示谢意。
7、参考文献：在论文末尾要列出在论文中参考过的专著、论文及其他资料，所列参考文献应按文中参考或引证的先后顺序排列。
8、注释：在论文写作过程中，有些问题需要在正文之外加以阐述和说明。
9、附录：对于一些不宜放在正文中，但有参考价值的内容，可编入附录中。
关于ieee的论文范文积极开展国际IEEE专业认证推进特色专业教育国际化摘要：培养国际化的高素质专业人才，推进特色专业教育国际化是教学改革所追求的目标之一。
为此，北京交通大学电子信息工程学院开展了通信工程、自动化两个本科专业的国际IEEE专业认证专家评估。
本文简要介绍了国际认证机构与ABET认证准则，分析对比了ABET认证准则与国内认证准则名称，并总结了参加IEEE专业认证工作的经验和体会，具有一定的借鉴和示范作用。
关键词：国际IEEE专业认证;教学改革;教育国际化;人才培养为了探索适应于高水平行业特色大学的国际化人才培养模式，促进北京交通大学工程教育和学科发展，提高专业的建设水平和国际竞争力，推进特色专业教育国际化，依托北京交通大学电子信息工程学院“通信工程”和“自动化”两个国家特色专业的学科优势，2011年5月，我校与IEEE国际认证委员会签署了合作备忘录，依据ABET专业认证准则，我校电子信息工程学院两个本科特色专业“通信工程”、“自动化”申报参加国际IEEE专业认证评估。
ieee论文格式要求
ieee论文格式要求篇一：IEEE英文论文格式模板Preparation of Papers for IEEE TRANSACTIONSand JOURNALS (March 2005)First A. Author, Second B. Author, Jr., and Third C. Author, Member, IEEEAbstract—These instructions give you guidelines for preparing papers for IEEE TRANSACTIONS and JOURNALS. Use this document as a template if you are using Microsoft Word 6.0 or later. Otherwise, use this document as an instruction set. The electronic file of your paper will be formatted further at IEEE. Define all symbols used in the abstract. Do not cite references in the abstract. Do not delete the blank line immediately above the abstract; it sets the footnote at the bottom of this column.point and either use Insert | Picture | From File or copy the image to the Windows clipboard and then Edit | Paste Special | Picture (with ―Float over text‖unchecked).IEEE will do the final formatting of your paper. If your paper is intended for a conference, please observe the conference page limits.II. PROCEDURE FOR PAPER SUBMISSIONA. Review StagePlease check with your editor on whether to submit your manuscript by hard copy or electronically for review. If hard copy, submit photocopies such that only one column appears per page. This will give your referees plenty of room to write comments. Send the number of copies specified by your editor (typically four). If submitted electronically, find out if your editor prefers submissions on disk or as e-mail attachments. If you want to submit your file with one column electronically, please do the following:--First, click on the View menu and choose Print Layout. --Second, place your cursor in the first paragraph. Go to the Format menu, choose Columns, choose one column Layout, and choose ―apply to whole document‖from the dropdown menu.--Third, click and drag the right margin bar to just over 4 inches in width.The graphics will stay in the ―second‖column, but you can drag them to the first column. Make the graphic wider to push out any text that may try to fill in next to the graphic.B. Final StageWhen you submit your final version, after your paper has been accepted, print it in two-column format, including figures and tables. Send three prints of the paper; two will go to IEEE and one will be retained by the Editor-in-Chief or conference publications chair.You must also send your final manuscript on a disk, which IEEE will use to prepare your paper for publication. Write the authors’names on the disk label. If you are using a Macintosh, please save your file on a PC formatted disk, if possible. You may use Zip or CD-ROM disks for large files, or compress files using Compress, Pkzip, Stuffit, or Gzip.Also send a sheet of paper with complete contact information for all authors. Include full mailing addresses, telephone numbers, fax numbers, and e-mail addresses. This information will be used to send each author a complimentary copy of the 1Index T erms—About four key words or phrases in alphabetical order, separated by commas. For a list of suggested keywords, send a blank e-mail to or visit the IEEE web site atI. INTRODUCTIONTHIS document is a template for Microsoft Word versions 6.0 or later. If you are reading a paper version of this document, please download the electronic file, TRANS-JOUR.DOC, from so you can use it to prepare your manuscript. If you would prefer to use LATEX, download IEEE’s LATEX style and sample files from the same Web page. Use these LATEX files for formatting, but please follow the instructions in TRANS-JOUR.DOC or TRANS-JOUR.PDF.If your paper is intended for a conference, please contact your conference editor concerning acceptable word processor formats for your particular conference.When you open TRANS-JOUR.DOC, select ―Page Layout‖from the ―View‖menu in the menu bar (View | Page Layout), which allows you to see the footnotes. Then type over sections of TRANS-JOUR.DOC or cut and paste from another document and then use markup styles. The pull-down style menu is at the left of the Formatting T oolbar at the top of your Word window (for example, the style at this point in the document is ―T ext‖). Highlight a section that you want to designate with a certain style, then selectthe appropriate name on the style menu. The style will adjust your fonts and line spacing. Do not change the font sizes or line spacing to squeeze more text into a limited number of pages. Use italics for emphasis; do not underline. T o insert images in Word, position the cursor at the insertion This work was supported by National Science Council, T aipei, T aiwan, R.O.C. Project no. NSC XX-XXXX-X-XXX-XXX..journal in which the paper appears. In addition, designate one author as the ―corresponding author.‖This is the author to whom proofs of the paper will be sent. Proofs are sent to the corresponding author only.fonts when creating your figures, if possible.4) Other Ways: Experienced computer users can convert figures and tables from their original format to TIFF. Some useful image converters are Adobe Photoshop, Corel Draw, and Microsoft Photo Editor, an application that is part of MicrosoftC. FiguresOffice 97 and Office 2000 (look for C:\Program Files\CommonAll tables and figures will be processed as images.However, Files \Microsoft Shared\ PhotoEd\ PHOTOED.EXE. (You may IEEE cannot extract the tables and figures embedded in have to custom-install Photo Editor from your original Office your document. (The figures and tables you insert in your disk.) document are only to 蓬勃范文网:ieee论文格式要求) you gauge the size of your paper, for Here is a way to make TIFF image files of tables. First, create the convenience of the referees, and to make it easy for you to your table in Word. Use horizontal lines but no vertical lines. distribute preprints.) Therefore, submit, on separate sheets of Hide gridlines (T able | Hide Gridlines). Spell check the table to paper, enlarged versions of the tables and figures that remove any red underlines that indicate spelling errors. Adjust appear in your document. These are the images IEEE will magnification (View | Zoom) such that you can view the entire scan and publish with your paper. table at maximum area when you select View | Full Screen.Move the cursor so that it is out of the way. Press ―Print Screen‖ D. Electronic Image Files (Optional) You will have the greatest control over the appearance of on your keyboard; this copies the screen image to theWindows your figures if you are able to prepare electronic image files. If clipboard. Open Microsoft Photo Editor and click Edit | Paste as you do not have the required computer skills, just submit paper New Image. Crop the table image (click Select button; select thepart you want, then Image | Crop). Adjust the properties of the prints as described above and skip this section.1) Easiest Way: If you have a scanner, the best and quickest image (File | Properties) to monochrome (1 bit) and 600 pixels way to prepare noncolor figure files is to print your tables and per inch. Resize the image (Image | Resize) to a width of 3.45 figures on paper exactly as you want them to appear, scan them, inches. Save the file (File | Save As) in TIFF with no and then save them to a file in PostScript (PS) or Encapsulated compression (click ―More‖button).Most graphing programs allow you to save graphs in TIFF; PostScript (EPS) formats. Use a separate file for each image.however, you often have no control over compression or File names should be of the form ―fig1.ps‖or ―fig2.eps.‖2) Slightly Harder Way: Using a scanner as above, save the number of bits per pixel. You should open these image files in a images in TIFF format. High-contrast line figures and tables program such as Microsoft Photo Editor and re-save them using should be prepared with 600 dpi resolution and saved with no no compression, either 1 or 8 bits, and either 600 or 220 dpi compression, 1 bit per pixel (monochrome), with file names of resolution (File | Properties; Image | Resize). See Section II-D2 the form ―fig3.tif‖or ―table1.tif.‖T o obtain a 3.45-in figure for an explanation of number of bits and resolution. If your (one-column width) at 600 dpi, the figure requires a horizontal graphing program cannot export to TIFF, you can use the same size of 2070 pixels. Typical file sizes will be on the order of 0.5 technique described for tables in the previous paragraph.A way to convert a figure from Windows Metafile (WMF) to MB.Photographs and grayscale figures should be prepared with TIFF is to paste it into Microsoft PowerPoint, save it in JPG 220 dpi resolution and saved with no compression, 8 bits per format, open it with Microsoft Photo Editor orsimilar converter, pixel (grayscale). T o obtain a 3.45-in figure (one-column width) and re-save it as TIFF.Microsoft Excel allows you to save spreadsheet charts in at 220 dpi, the figure should have a horizontal size of 759 pixels.Color figures should be prepared with 400 dpi resolution and Graphics Interchange Format (GIF). T o get good resolution, saved with no compression, 8 bits per pixel (palette or 256 make the Excel charts very large. Then use the ―Save ascolor). T o obtain a 3.45-in figure (one column width) at 400 dpi,the figure should have a horizontal size of 1380 pixels.For more information on TIFF files, please go to and click on the link ―Guidelines for Author Supplied Electronic T ext and Graphics.‖3) Somewhat Harder Way: If you do not have a scanner, you may create noncolor PostScript figures by ―printing‖them to files. First, download a PostScript printer driver from (for Windows) or from (for Macintosh) and install the ―Generic PostScript Printer‖definition. In Word, paste your figure into a new document. Print to a file usingthe PostScript printer driver. File names should be of the form ―fig5.ps.‖Use Adobe T ype 12Fig. 1. Magnetization as a function of applied field. Note that ―Fig.‖is abbreviated. There is a period after the figure number, followed by two spaces. It is good practice to explain the significance of the figure in the caption.HTML‖feature (see ). You can then convert from GIF to TIFF using Microsoft Photo Editor, for example.No matter how you convert your images, it is a good idea to print the TIFF files to make sure nothing was lost in the conversion.If you modify this document for use with other IEEE journals or conferences, you should save it as type ―Word 97-2000 6.0/95 - RTF (*.doc)‖so that it can be opened by any version of Word.E. Copyright FormAn IEEE copyright form should accompany your final submission. You can get a .pdf, .html, or .doc version at or from the first issues in each volume of the IEEETRANSACTIONS and JOURNALS. Authors are responsible for obtaining any security clearances.III. MATHIf you are using Word, use either the Microsoft Equation Editor or the MathType add-on () for equations in your paper (Insert | Object | Create New | Microsoft Equation or MathType Equation). ―Float over text‖should not be selected.IV. UNITSUse either SI (MKS) or CGS as primary units. (SI units are strongly encouraged.) English units may be used as secondary units (in parentheses). This applies to papers in data storage. For example, write ―15 Gb/cm2 (100 Gb/in2).‖An exception is when English units are used as identifiers in trade, such as ―3? in disk drive.‖Avoid combining SI and CGS units, such as current in amperes and magnetic field in oersteds. This often leads to confusion because equations do not balance3units for each quantity in an equation.The SI unit for magnetic field strength H is A/m. However, if you wish to use units of T, either refer tomagnetic flux density B or magnetic field strength symbolized as μ0H. Use the center dot to separate compound units, e.g., ―A·m2.‖V. HELPFUL HINTSA. Figures and T ablesBecause IEEE will do the final formatting of your paper, you do not need to position figures and tables at the top and bottom of each column. In fact, all figures, figure captions, and tables can be at the end of the paper. Large figures and tables may span both columns. Place figure captions below the figures; place table titles above the tables. If your figure has two parts, include the labels ―(a)‖and ―(b)‖as part of the artwork. Please verify that the figures and tables you mention in the text actually exist. Please do not include captions as part of the figures. Do not put captions in “text boxes”linked to the figures. Do not put borders around the outside of your figures. Use the abbreviation ―Fig.‖even at the beginning of a sentence. Do not abbreviate ―T able.‖T ables are numbered with Roman numerals.Color printing of figures is available, but is billed to the authors (approximately $1300, depending on the number of figures and number of pages containing color). Include anote with your final paper indicating that you request color printing. Do not use color unless it is necessary for the properinterpretation of your figures. If you want reprints of your color article, the reprint order should be submitted promptly. There is an additional charge of $81 per 100 for color reprints. Figure axis labels are often a source of confusion. Use words rather than symbols. As an example, write the quantity ―Magnetization,‖or ―Magnetization M,‖not just ―M.‖Put units in parentheses. Do not label axes only with units. As in Fig. 1, for example, write ―Magnetization (A/m)‖or ―Magnetization (A?m?1),‖not just ―A/m.‖Do not label axes with a ratio of quantities and units. For example, write ―T emperature (K),‖not ―T emperature/K.‖Multipliers can be especially confusing. Write ―Magnetization (kA/m)‖or ―Magnetization (103 A/m).‖Do not write ―Magnetization (A/m) ? 1000‖because the reader would not know whether the top axis label in Fig. 1 meant 16000 A/m or 0.016 A/m. Figure labels should be legible, approximately 8 to 12 point type.B. ReferencesNumber citations consecutively in square brackets [1]. The sentence punctuation follows the brackets [2]. Multiple references [2], [3] are each numbered with separate brackets [1]–[3]. When citing a section in a book, please give the relevant page numbers [2]. In sentences, refer simply to the reference number, as in [3]. Do not use ―Ref. [3]‖or ―reference [3]‖except at the beginning of a sentence: ―Reference [3] shows ... .‖Unfortunately the IEEE document translator cannot handle automatic endnotes in Word; therefore, type the reference list at the end of the paper using the ―References‖style.Number footnotes separately in superscripts (Insert | Footnote).1 Place the actual footnote at the bottom of the column in which it is cited; do not put footnotes in the reference list (endnotes). Use letters for table footnotes (see T able I). Please note that the references at the end of this document are in the preferred referencing style. Give all authors’names; do not use ―et al.‖unless there are six authors or more. Use a space after authors' initials. Papers that have not been published should be cited as ―unpublished‖[4]. Papers that have been submitted for publication should be cited as ―submitted forpublication‖[5]. Papers that have been accepted for publication, but not yet specified for an issue should be cited as ―to be published‖[6]. Please give affiliations and addresses for private communications [7].Capitalize only the first word in a paper title, except for proper nouns and element symbols. For papers published in translation journals, please give the English citation first, followed by the original foreign-language citation [8].C. Abbreviations and AcronymsDefine abbreviations and acronyms the first time they are used in the text, even after they have already been defined in the abstract. Abbreviations such as IEEE, SI, ac, and dc do not haveto be defined. Abbreviations that incorporate periods should not have spaces: write ―C.N.R.S.,‖not ―C. N. R. S.‖Do not use abbreviations in the title unless they are unavoidable (for example, ―IEEE‖in the title of this article).D. EquationsNumber equations consecutively with equation numbers in parentheses flush with the right margin, as in (1). First use the equation editor to create the equation. Thenselect the ―Equation‖markup style. Press the tab key and write the equation number in parentheses. T o make your equations more compact, you may use the solidus ( / ), the exp function, or appropriate exponents. Use parentheses to avoid ambiguities in denominators. Punctuate equations when they are part of a sentence, as inr20F(r,?)drd??[?r2/(2?0)]??(1)exp(??|zj?zi|)??1J1(?r2)J0(?ri)d?.Be sure that the symbols in your equation have been defined before the equation appears or immediately following. Italicize symbols (T might refer to temperature, but T is the unit tesla). Refer to ―(1),‖not ―Eq. (1)‖or ―equation (1),‖except at the beginning of a sentence: ―Equation (1) is ... .‖E. Other RecommendationsUse one space after periods and colons. Hyphenate complex modifiers: ―zero-field-cooled magnetization.‖Avoid dangling participles, such as, ―Using (1), thepotential was calculated.‖[It is not clear who or what used (1).] Write instead, ―The potential was calculated by using (1),‖or ―Using (1), we calculated the potential.‖Use a zero before decimal points: ―0.25,‖not ―.25.‖Use ―cm3,‖not ―cc.‖Indicate sample dimensions as ―0.1 cm ? 0.2 cm,‖not ―0.1 ? 0.2 cm2.‖The abbreviation for ―seconds‖is ―s,‖not ―sec.‖Do not mix complete spellings and abbreviations of units: use ―Wb/m2‖or ―webers per square meter,‖not ―webers/m2.‖When expressing a range of values, write ―7 to 9‖or ―7-9,‖not ―7~9.‖A parenthetical statement at the end of a sentence is punctuated outside of the closing parenthesis (like this). (A parenthetical sentence is punctuated within the parentheses.) In American English, periods and commas are within quotation marks, like ―this period.‖Other punctuation is ―outside‖! Avoid contractions; for example, write ―do not‖instead of ―don’t.‖The serial comma is preferred: ―A, B, and C‖instead of ―A,B and C.‖If you wish, you may write in the first person singular or plural and use the active voice (―I observed that ...‖or ―We observed that ...‖instead of ―It was observedthat ...‖). Remember to check spelling. If your native language is not English, please get a native English-speaking colleague to proofread your paper.It is recommended that footnotes be avoided (except for the unnumbered footnote with the receipt date on the first page). Instead, try to integrate the footnote information into the text.14VI. SOME COMMON MISTAKESThe word ―data‖is plural, not singular. The subscript for the permeability of vacuum μ0 is zero, not a lowercase letter ―o.‖The term for residual magnetization is ―remanence‖; the adjective is ―remanent‖; do not write ―remnance‖or ―remnant.‖Use the word ―micrometer‖instead of ―micron.‖ A graph within a graph is an ―inset,‖not an ―insert.‖The word ―alternatively‖is preferred to the word ―alternately‖(unless you really mean something that alternates). Use the word ―whereas‖instead of ―while‖(unless you are referring to simultaneous events). Do not use the word ―essentially‖to mean ―approximately‖or ―effectively.‖Do not use the word ―issue‖as a euphemism for ―problem.‖When compositions are not specified, separate chemical symbols by en-dashes; for example, ―NiMn‖indicates the intermetallic compound Ni0.5Mn0.5 whereas ―Ni–Mn‖indicates an alloy of some composition NixMn1-x.Be aware of the different meanings of the homophones ―affect‖(usually a verb) and ―effect‖(usually a noun), ―complement‖and ―compliment,‖―discreet‖and ―discrete,‖―principal‖(e.g., ―principal investigator‖) and ―principle‖(e.g., ―principle of measurement‖). Do not confuse ―imply‖and ―infer.‖Prefixes such as ―non,‖―sub,‖―micro,‖―multi,‖and ―"ultra‖are not independent words; they should be joined to the words they modify, usually without a hyphen. There is no period after the ―et‖in the Latin abbreviation ―et al.‖(it is also italicized). The abbreviation ―i.e.,‖means ―that is,‖and the abbreviation ―e.g.,‖means ―for example‖(these abbreviations are not italicized).An excellent style manual and source of information forscience writers is [9]. A general IEEE style guide, Information for Authors, is available atVII. EDITORIAL POLICYSubmission of a manuscript is not required for participation in a conference. Do not submit a reworked version of a paper you have submitted or published elsewhere. Do not publish ―preliminary‖data or results. The submitting author is responsible for obtaining agreement of all coauthors and any consent required from sponsors before submitting a paper. IEEE TRANSACTIONS and JOURNALS strongly discourage courtesy authorship. It is the obligation of the authors to cite relevant prior work.The Transactions and Journals Department does not publish conference records or proceedings. The TRANSACTIONS does publish papers related to conferences that have been recommended for publication on the basis of peer review. As a matter of convenience and service to the technical community, these topical papers are collected and published in one issue of the TRANSACTIONS.At least two reviews are required for every papersubmitted. For conference-related papers, the decision to accept or reject a5paper is made by the conference editors and publications committee; the recommendations of the referees are advisory only. Undecipherable English is a valid reason for rejection. Authors of rejected papers may revise and resubmit them to the TRANSACTIONS as regular papers, whereupon they will be reviewed by two new referees.VIII. PUBLICATION PRINCIPLESThe contents of IEEE TRANSACTIONS and JOURNALS are peer-reviewed and archival. The TRANSACTIONS publishes scholarly articles of archival value as well as tutorial expositions and critical reviews of classical subjects and topics of current interest.Authors should consider the following points:1) T echnical papers submitted for publication must advancethe state of knowledge and must cite relevant prior work. 2) The length of a submitted paper should be commensuratewith the importance, or appropriate to the complexity,of the work. For example, an obvious extension of previously published work might not be appropriate for publication or might be adequately treated in just a few pages.3) Authors must convince both peer reviewers and the editorsof the scientific and technical merit of a paper; the standards of proof are higher when extraordinary or unexpected results are reported.4) Because replication is required for scientific progress,papers submitted for publication must provide sufficient information to allow readers to perform similar experiments or calculations and use the reported results. Although not everything need be disclosed, a paper must contain new, useable, and fully described information. For example, a specimen's chemical composition need not be reported if the main purpose of a paper is to introduce a new measurement technique. Authors should expect to be challenged by reviewers if the results are not supported by adequate data and critical details.5) Papers that describe ongoing work or announce the latesttechnical achievement, which are suitable forpresentation at a professional conference, may not be appropriate for publication in a TRANSACTIONS or JOURNAL.IX. CONCLUSIONA conclusion section is not required. Although a conclusion may review the main points of the paper, do not replicate the abstract as the conclusion. A conclusion might elaborate on the importance of the work or suggest applications and extensions.APPENDIXAppendixes, if needed, appear before the acknowledgment.ACKNOWLEDGMENTThe preferred spelling of the word ―acknowledgment‖in American English is without an ―e‖after the ―g.‖Use the篇二：IEEE论文专用格式Paper Title (use style: paper title)Subtitle as needed (paper subtitle)Authors Name/s per 1st Affiliation (Author)line 1 (of Affiliation): dept. name of organization line 2: name of organization, acronyms acceptableline 3: City, Countryline 4: e-mail address if desiredAuthors Name/s per 2nd Affiliation (Author)line 1 (of Affiliation): dept. name of organization line 2: name of organization, acronyms acceptableline 3: City, Country line 4: e-mail address if desiredAbstract—This electronic document is a “live”template. The various components of your paper [title, text, heads, etc.] are already defined on the style sheet, as illustrated by the portions given in this document. (Abstract) Keywords-component; formatting; style; styling; insert (key words)I. 中文正文标题一在引言部分，可以采用中文书写。
IEEE论文专用格式
Paper Title (use style: paper title)Subtitle as needed (paper subtitle)Authors Name/s per 1st Affiliation (Author) line 1 (of Affiliation): dept. name of organization line 2: name of organization, acronyms acceptableline 3: City, Countryline 4: e-mail address if desired Authors Name/s per 2ndAffiliation (Author) line 1 (of Affiliation): dept. name of organization line 2: name of organization, acronyms acceptableline 3: City, Countryline 4: e-mail address if desiredAbstract—This electroni c docum ent is a “live” template. The various components of your paper [title, text, heads, etc.] are already defined on the style sheet, as illustrated by the portions given in this document. (Abstract)Keywords-component; formatting; style; styling; insert (key words)I.中文正文标题一在引言部分,可以采用中文书写。
II.中文正文标题二A.二级标题1二级标题的正文部分。
ieee期刊论文格式
ieee期刊论⽂格式 作为科技⾰新的催化剂，IEEE通过在⼴泛领域的活动规划和服务⽀持其成员的需要。
下⾯是由店铺整理的ieee期刊论⽂格式，谢谢你的阅读。
ieee期刊论⽂格式 ⼀、封⾯ 题⽬：⼩⼆号⿊体加粗居中。
各项内容：四号宋体居中。
⼆、⽬录 ⽬录：⼆号⿊体加粗居中。
章节条⽬：五号宋体。
⾏距：单倍⾏距。
三、论⽂题⽬：⼩⼀号⿊体加粗居中。
四、中⽂摘要 1、摘要：⼩⼆号⿊体加粗居中。
2、摘要内容字体：⼩四号宋体。
3、字数：300字左右。
4、⾏距：20磅 5、关键词：四号宋体，加粗。
词3-5个，每个词间空⼀格。
五、英⽂摘要 1、ABSTRACT：⼩⼆号 Times New Roman. 2、内容字体：⼩四号 Times New Roman. 3、单倍⾏距。
4、Keywords：四号加粗。
词3-5个，⼩四号 Times New Roman. 词间空⼀格。
六、绪论⼩⼆号⿊体加粗居中。
内容500字左右，⼩四号宋体，⾏距：20磅 七、正⽂ (⼀)正⽂⽤⼩四号宋体 (⼆)安保、管理类毕业论⽂各章节按照⼀、⼆、三、四、五级标题序号字体格式 章：标题⼩⼆号⿊体，加粗，居中。
节：标题⼩三号⿊体，加粗，居中。
⼀级标题序号如：⼀、⼆、三、标题四号⿊体，加粗，顶格。
⼆级标题序号如：(⼀)(⼆)(三) 标题⼩四号宋体，不加粗，顶格。
三级标题序号如：1.2.3. 标题⼩四号宋体，不加粗，缩进⼆个字。
四级标题序号如：(1)(2)(3) 标题⼩四号宋体，不加粗，缩进⼆个字。
五级标题序号如：①②③标题⼩四号宋体，不加粗，缩进⼆个字。
医学、体育类毕业论⽂各章序号⽤阿拉伯数字编码，层次格式为：1××××(⼩2号⿊体，居中)××××××××××××××(内容⽤4号宋体)。
ieee引用文献
ieee引用文献
IEEE引用文献是学术写作中常见的引用格式，特别适用于工程、计算机科学等技术领域的论文。
IEEE是指国际电气和电子工程师协会，其引用文献格式有着严格的规定，包括作者姓名、文章标题、期刊名称、卷号、期号、页码等信息的排列顺序和格式要求。
下面将详细介绍IEEE引用文献的格式要求和注意事项。
在IEEE引用文献中，作者姓名的格式为“作者姓氏，作者名字的首字母”，如果有多位作者，则用逗号隔开，最后一位作者前用“and”连接。
期刊文章的引用格式为：作者姓名，“文章标题”，期刊名称，卷号，期号，页码，出版年份。
会议论文的引用格式为：作者姓名，“文章标题”，会议名称，页码，出版年份。
书籍的引用格式为：作者姓名，“书名”，出版地，出版商，出版年份。
在文中引用文献时，应使用方括号标注引用文献的编号，例如“[1]”。
引用同一作者的多篇文献时，应按照出版年份顺序编号，如“[2]、[3]”。
在文末列出参考文献时，应按照引用顺序列出，每一条引用文献的格式要与文中引用的格式一致，包括作者姓名、文章标题、期刊名称、卷号、期号、页码、出版年份等信息。
在撰写学术论文或科研报告时，遵循IEEE引用文献的格式要求能够提高文献引用的规范性和可读性，有助于读者准确获取引用文献的信息，展示作者对相关研究的了解和引用文献的完整性。
因此，在撰写学术论文时，务必注意遵循IEEE引用文献的格式要求，确保引用文献的准确性和规范性，提升论文的学术水平和可信度。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
CSO 2011投稿论文写作要求(IEEE CS格式)0. 特别提示：请大家使用IEEE CS最新版的两栏格式模板进行排版格式处理，同时考虑将论文压缩在IEEE CS的5页之内，如超过5页，超出页数将会加收额外费用。
下面是一些中国作者排版时应该注意的问题，请准备论文投稿时注意。
1. 标题(Title):标题又称题目，是以最恰当、最简明的词语反映论文中最重要的特定内容的逻辑组合。
论文题目是一篇论文给出的涉及论文范围与水平的第一个重要信息。
论文题目十分重要，必须用心斟酌选定，有人说：好的论文题目是好文章的一半。
对论文题目的要求是：准确得体、简短精炼、外延和内涵恰如其分、醒目。
在CSO2011的会议论文中，请使用14点(14-point)粗体罗马字(Time New Roman, boldface type)，标题应居中显示，每个实词(包括名词、代词、动词、形容词和副词)的首字母应该大写，虚词(包括冠词、连词、介词等)，注意如果虚词是标题的首个单词，也应该大写，如“A Support Vector Machines Method for Classification Problem”，标题之后留一个10点字体的空行。
另外，根据以前会议审稿结果，一些标题中还有“Study on”或者“Research on”类似的词，应该全部去掉，审稿人认为那些是典型的中国式英语翻译，为了顺利帮助检索，英文的写作应该更符合英文的习惯。
注意：标题字体应该严格按照修改要求来做，不要擅自更改标题字体。
特别长的标题宜分成2行或者3行，如果距离过宽，请修改段前距离(在word的“格式--段落”菜单中可以修改段前段后距离)，这样就可以缩小行距。
尽量用“Times New Roman”,不要对这个字体进行压缩。
此外，首页标题不要用下标，表示基金感谢放在Conclusion之后和“References”之前，设置“Acknowledgment”一节，对一些基金支持和别人提供的帮助等表示感谢。
2. 作者姓名和单位: 这一项属于论文署名问题。
署名一是为了表明文责自负，二是记录作用的劳动成果，三是便于读者与作者的联系及文献检索（作者索引）。
在CSO2011的论文中，作者姓名应该放在论文标题下方，居中用11点字体显示，不要加粗体。
论文有多个作者时，可以用分2或3列的方式来显示。
作者单位和email地址应该在作者下方，使用10点罗马字。
在作者信息下面保留2个10点字体的空行。
对于中国作者，要使用“名+姓”的格式写作者的名字，否则的话在检索数据库里面出错。
例如，有个叫张三的中国作者，如果他的署名是 Zhang San，因为检索机构是国外的，国外都是名前姓后的方式，检索到数据库中就是San Z.，名经常被缩写为一个字母。
所以务请各位作者注意。
注意：作者的排列问题主要是多个作者出现的问题，大家可以按照下面几个原则来做：(a) 如果2个或多个作者属于同一个单位，那就按照一栏格式，每个作者用逗号隔开：Sanfeng Zhang, Sihai Li, Wuyi WangDepartment of Computer Sciences, Beijing University, Beijing, 100110, ChinaE-mail: sfzhang@(b) 如果2个或多个作者属于分属不同单位，那就按照下面的格式，利用表格来分栏，表格线变虚线即可实现。
Sanfeng Zhang Liuxing Zhao Qiutian QianDepartment of Computer Science, Beijing University,Beijing, 100110, ChinaE-mail: sfzhang@School of Computing,Tsinghua UniversityBeijing, 100084, ChinaE-mail: xzhao@Faculty of Business,Harvard University,Washington, 003-24, USAE-mail: qtqian@(c) 如果多个作者中，几个属于一个单位，另外几个属另一个不同单位，那就按照下面的格式，利用表格来分栏，表格线变虚线即可实现。
Sanfeng Zhang, Sihai Li Liuxing Zhao Qiutian Qian, L. ZadehDepartment of Computer Science, Beijing University,Beijing, 100110, ChinaE-mail: sfzhang@School of Computing,Tsinghua UniversityBeijing, 100084, ChinaE-mail: xzhao@Faculty of Business,Harvard University,Washington, 003-24, USAE-mail: qtqian@(d) 如果是4个作者或更多作者属于4个以上不同单位，那就变成4行2列或者6行2列，如下所示：Sanfeng Zhang Liuxing ZhaoDepartment of Computer Science, Beijing University,Beijing, 100110, ChinaE-mail: sfzhang@School of Computing, Tsinghua University Beijing, 100084, China E-mail: lxzhao@Liuxing Zhao Qiutian QianSchool of Computing, Tsinghua University Beijing, 100084, China E-mail: lxzhao@Faculty of Business,Harvard University, Washington, 003-24, USA E-mail: qtqian@另外，作者的Email不要让它有下划线。
3. 摘要(Abstract):摘要是论文内容不加注释和评论的简短陈述，是可以帮助读者不阅读论文全文即能获得必要的信息。
下面总结了一篇好的学术论文摘要的基本要求，具体可参见示例。
需重视的是，IEEE要求摘要限制在200个单词以内，但是字数也不宜太少。
【摘要实例】标题：Variable precision rough set for multiple decision attribute analysis英文版摘要: [Purpose] In order to solve the multi-attribute decision analysis (MADA) problem with multiple conflicting decision attributes and multiple condition attributes, a variable precision rough set (VPRS) model is used in this paper. [Method] By introducing confidence measure and β-reduct, the VPRS model can rationally solve the conflicting decision analysis problem with multiple decision attributes and multiple condition attributes. For illustration, a medical diagnosisexample is utilized to show the feasibility of the VPRS model in solving MADA problem withmultiple decision attributes and multiple condition attributes. [Results] Empirical results show that the decision rule with highest confidence measure will be used as the final decision rules in the MADA problem with multiple conflicting decision attributes and multiple condition attributes if there are some conflicts among decision rules resulting from multiple decision attributes. [Conclusions] The confidence-measure-based VPRS model can effectively solve the conflicts of decision rules from multiple decision attributes and thus a class of MADA problem with multiple conflicting decision attributes and multiple condition attributes are solved.对应的中文版：标题：基于变精度粗糙集的多决策属性分析【中文版摘要】[目的]为了处理多个决策属性之间的冲突，利用一个变精度粗糙集模型解决了具有多决策属性和多条件属性的决策分析问题。
[过程和方法]通过引入置信测度和β-约简规则，变精度粗糙集模型能够合理地处理多个决策属性之间的冲突问题。
为解释这个模型的实施，一个医疗诊断的实例被采用。
[结果] 实例的分析表明：在具有多决策属性和多条件属性的决策分析问题中，如果利用β-约简规则从多个决策属性之中提取的决策规则之间存在冲突，则置信测度水平较高的决策规则将作为最终的决策依据。
[结论] 这个基于置信测度的变精度粗糙集模型能够有效地解决多个决策属性引致的决策规则之间的冲突，从而解决了一类具有多决策属性和多条件属性的决策分析问题。
注意，IEEE新版的模板里面要求有关键词，可设3-5个关键词，最多不要超过6个。
另外，摘要内容和关键词均为9点罗马字，其中摘要为粗体，关键词为斜体。
4. 引言(Introduction):引言又称前言，属于整篇论文的引论部分。
其写作内容包括：研究的理由、目的、背景、前人的工作和知识空白，理论依据和实验基础，预期的结果等。