14_ws10b_012904
Cisco UCS B200 M4 Blade Server 产品概述说明书
Data SheetCisco UCS B200 M4 Blade ServerProduct OverviewThe Cisco Unified Computing System ™ (Cisco UCS ®) combines Cisco UCS B-Series Blade Servers and C-SeriesRack Servers with networking and storage access into a single converged system with simplified managemen t,greater cost efficiency and agility, and increased visibility and control. One of the newest servers in the Cisco UCSportfolio is the Cisco UCS B200 M4 Blade Server.The UCS B200 M4 Blade Server (Figure 1) delivers performance, flexibility and optimiza tion for data centers andremote sites. This enterprise-class server offers market-leading performance, versatility, and density withoutcompromise for workloads ranging from web infrastructure to distributed databases. The Cisco UCS B200 M4server can quickly deploy stateless physical and virtual workloads, with the programmable ease of use of theCisco UCS Manager software and simplified server access with Cisco ®SingleConnect technology. Based on theIntel ® Xeon ® processor E5-2600 v4 and v3 product family, it offers up to 1.5 TB of total memory when using 64 GBDIMMs, up to two drives, and up to 80 Gbps I/O throughput. The Cisco UCS B200 M4 offers exceptional levels ofperformance, flexibility, and I/O throughput to run your most demanding applications.In addition, Cisco UCS has the architectural advantage of not having to power and cool excess switches, NICs andHBAs in each blade server chassis. Having a larger power budget per blade server provides uncompromisedexpandability and capabilities, as in the new Cisco UCS B200 M4 server with its leading memory-slot and drivecapacity.Figure 1.Cisco UCS B200 M4 Blade ServerCisco UCS B200 M4 OverviewThe Cisco UCS B200 M4 provides:●Up to two multicore Intel Xeon processor E5-2600 v4 and v3 series CPUs for up to 44 processing cores. ● 24 DIMM slots for industry-standard DDR4 memory at speeds up to 2400 MHz and it offers up to 1.5 TB oftotal memory when using 64 GB DIMMs.● Two optional, hot-plug, SAS and SATA hard disk drives (HDDs) or solid-state drives (SSDs).●Cisco UCS Virtual Interface Card (VIC) 1340: a 2-port, 40 Gigabit Ethernet, Fibre Channel over Ethernet(FCoE)-capable modular LAN on motherboard (mLOM) mezzanine adapter. ◦ 2x ports - 40 Gbps Unified I/O portsor2 sets of 4 x 10-Gbps unified I/O ports◦ Delivers 80 Gbps to the server◦ Adapts to either 10 Gbps or 40 Gbps fabric connections●Cisco FlexStorage local drive storage subsystem provides flexible boot and local storage capabilities. Itallows you to:◦Support for optional NVIDIA M6 GPU◦Configure the Cisco UCS B200 M4 to meet your local storage requirements without having to buy,power and cool components that you do not need.◦Choose an enterprise-class RAID controller, or go without any controller or drive bays if not utilizing local drives◦Easily add, change, or remove Cisco FlexStorage modules●The Cisco UCS B200 M4 server is a half-width blade. Up to eight can reside in the 6-rack-unit (6RU) CiscoUCS 5108 Blade Server Chassis, offering one of the highest densities of servers per rack unit of bladechassis in the industry.OverviewThe Cisco UCS B200 M4 server is suited for a broad spectrum of IT workloads, including:●IT and web infrastructure●Virtualized workloads●Consolidating applications●Virtual desktops●Middleware●ERP and CRM applications●Single-instance and distributed databasesThe Cisco UCS B200 M4 Blade Server is one member of the Cisco UCS B-Series Blade Servers platform.As part of Cisco UCS, Cisco UCS B-Series servers incorporate many innovative Cisco technologies to help customers handle their most challenging workloads. Cisco UCS B-Series servers within a Cisco UCSmanagement framework incorporate a standards-based unified network fabric, Cisco Data Center VM-FEX virtualization support, Cisco UCS Manager, Cisco UCS Central, Cisco UCS Director software, and Cisco fabric extender architecture (Figure 2)Figure 2. Cisco UCS Server Innovations Change the E conomics of the Data Center by E nabling Customer Workloads to Benefit from Cisco UCS Simplification and Operational E fficienciesFeatures and Benefits of the Cisco UCS B200 M4 ServerTable 1 lists the main features and benefits of the Cisco UCS B200 M4.Table 1. Main Features and BenefitsSpecificationsTable 2 provides specifications for the Cisco UCS B200 M4. Table 2. P roduct SpecificationsTable 3. Regulatory Standards ComplianceWarranty InformationFind warranty information at on the Product Warranties page.Cisco Unified Computing ServicesUsing a unified view of data center res ources, Cisco and our industry-leading partners deliver services that accelerate your transition to a unified computing environment. Cisco Unified Computing Services can help you create an agile infrastructure that accelerates time to value, reduces costs and risks, and maintains availability during deployment and migration. After deployment, our services can help you improve performance, availability, and resiliency as your business needs evolve, and mitigate risk further. Quickly deploy your data center r esources and optimize ongoing operations to better meet your business needs. For more information about these and other Cisco Data Center Services offerings, visit /go/unifiedcomputingservices or/go/dcservices.Cisco CapitalFinancing to Help You Achieve Your ObjectivesCisco Capital can help you acquire the technology you need to achieve your objective s and stay competitive. We can help you reduce CapEx. Accelerate your growth. Optimize your investment dollars and ROI. Cisco Capital financing gives you flexibility in acquiring hardware, software, services, and complementary third-party equipment. And th ere’s just one predictable payment. Cisco Capital is available in more than 100 countries. Learn more.For More InformationFor more information about Cisco UCS B-Series Blade Servers, visit/en/US/products/ps10280/index.html or contact your local Cisco representative.Printed in USA C78-732434-04 11/16。
西门子网络设备订货号
定货号注释PROFIBUS网络部件：网卡及电缆6ES7 972-0CA23-0XA0 编程适配器（编程电缆）6ES7 972-0CB20-0XA0 USB接口编程适配器（USB接口编程电缆）6ES7 972-0CB35-0XA0 TS适配器II 用于调制解调器远程服务6ES7 972-0CC35-0XA0 TS适配器II 用于ISDN 远程服务6GK1 561-1AA01 CP5611网卡(PCI总线软卡,支持MPI,PPI,PROFIBUS-DP)6GK1 551-2AA00 CP5512网卡(PCMCIA总线软卡,支持MPI,PPI,PROFIBUS-DP,笔记本电脑用，32BIT)6GK1 561-3AA01 CP5613网卡(PCI总线硬卡,支持PROFIBUS-DP主站)6GK1 561-3FA00 CP5613光纤网卡(PCI总线硬卡,支持PROFIBUS-DP主站6GK1 561-4AA01 CP5614网卡(PCI总线硬卡,支持PROFIBUS-DP主站/从站)6GK1 561-4FA00 CP5614光纤网卡(PCI总线硬卡,支持PROFIBUS-DP主站/从站)6XV1 830-0EH10 PROFIBUS通讯电缆6XV1 820-5AH10 光纤电缆(米)6XV1 820-5BH50 光纤电缆含BFOC (5米)6XV1 820-5BT10 光纤电缆含BFOC (100米)6GK1 901-0DA20-0AA0 BFOC接头（每包20只）6ES7 901-0BF00-0AA0 5米MPI电缆6ES7 901-1BF00-0XA0 RS232电缆链接模板6ES7 156-0AA01-0XA0 DP-AS-i 网关IP656GK1 415-2AA01 DP-AS-i 网关IP206GK1 415-0AA01 DP-EIB 网关6ES7 158-0AA01-0XA0 DP/RS232 网关6ES7 158-0AD01-0XA0 DP/DP 耦合器6ES7 157-0AC81-0XA0 DP/PA 耦合器，非本安区6ES7 157-0AD82-0XA0 DP/PA 耦合器，本安区6ES7 157-0AA82-0XA0 DP/PA LINK IM1576XV1 830-5EH10 PROFIBUS FC 过程电缆( 易爆区)6XV1 830-5FH10 PROFIBUS FC 过程电缆( 非易爆区)6ES7 195-7HE80-0XA0 有源IM157/IM157冗余总线单元6ES7 195-7HF80-0XA0 DP/PA耦合器有源总线单元6GK1 905-0AA00 SpliTConnect分接头（10件）6GK1 905-0AD00 SpliTConnect终端(Ex)（5件）6GK1 905-0AB10 SpliTConnect M12输出端（5件）6GK1 905-0AC00 SpliTConnect 耦合器（10件）总线连接器6GK1 905-6AA00 快速剥线工具6ES7 972-0BA50-0XA0 快速连线网络接头（不带编程口）6ES7 972-0BB50-0XA0 快速连线网络接头（带编程口）6ES7 972-0BA12-0XA0 90度网络接头（不带编程口）6ES7 972-0BB12-0XA0 90度网络接头（带编程口）6ES7 972-0BA41-0XA0 35度网络接头（不带编程口）6ES7 972-0BB41-0XA0 35度网络接头（带编程口）6GK1 500-0EA02 无角度网络接头（不带编程口）6GK1 500-0FC00 无角度快速连线网络接头（不带编程口）网络部件6ES7 972-0AA01-0XA0 12M PROFIBUS 中继器IP206ES7 972-0AB01-0XA0 12M PROFIBUS 诊断中继器6ES7 972-0DA00-0AA0 有源终端元件6ES7 972-4AA00-0XA0 电源导轨辅助装置6GK1 500-3AA00 光纤总线端子OBT6GK1 503-0AA00 红外线链接模块ILM6GK1 502-3CA10 PROFIBUS OLM （1个RS485接口，两个BFOC）6GK1 502-2CB10 PROFIBUS OLM （1个RS485接口，两个BFOC）6GK1 502-3CB10 PROFIBUS OLM （1个RS485接口，四个BFOC）6ES7 181-0AA01-0AA0 BT200 硬件测试装置6ES7 193-8MA00-0AA0 BT200 记录软件套装Win95/98/NT6ES7 193-8LA00-0AA0 充电器BT200 230V6ES7 193-8LB00-0AA0 充电器BT200 110V软件6ES5 895-6SE03 COM PROFIBUS 软件(DP/FMS) V5.1+SP16GK1 704-5CW63-3AA0 SOFTNET S7 /20056GK1 704-5DW63-3AA0 SOFTNET DP /20056GK1 704-5SW63-3AA0 SOFTNET DP Slave /20056GK1 713-5DB63-3AA0 DP-5613 /2005 网卡驱动程序6GK1 713-5FB63-3AA0 FMS-5613 /2005 网卡驱动程序6GK1 713-5CB63-3AA0 S7-5613 /2005 网卡驱动程序工业以太网网卡及电缆：6GK1 161-3AA01 CP1613网卡(以太网10M/100M自适应,PCI总线硬卡）6GK1 161-2AA00 CP1612网卡(以太网10M/100M自适应,PCI总线）6GK1 161-6AA00 CP1616网卡（32位，33/66M，4个接口，PCI总线）6GK1 151-2AA00 CP1512网卡(10M/100M以太网,PCMCIA笔记本用)6GK1 151-5AA00 CP1515网卡(11M无线以太网,PCMCIA笔记本用)6GK1 611-0TA01-1BV0 MOBIC T8 V1.1C6XV1 850-0AH10 ITP标准工业以太网通讯电缆(米)6XV1 850-0BT10 ITP标准工业以太网电缆(100米) 9/156XV1 850-0BN15 ITP标准工业以太网电缆(15米) 9/156XV1 870-3QN10 TP转接软线RJ45/RJ45，10米6XV1 850-0BH20 ITP标准工业以太网电缆(2米) 9/156XV1 840-2AH10 FC标准工业以太网通讯电缆(米)6XV1 850-2LN10 TP转接软线15/RJ45，10米6XV1 850-2GN10 TP转接软线RJ45/RJ45，10米6XV1 850-2JN10 TP转接软线9/RJ45，10米6XV1 850-2HN10 TP XP 转接软线RJ45/RJ45，10米6GK1 901-1FC00-0AA0 FC引出插座RJ45网络部件6GK1 105-2AA10 工业以太网OSM ITP62 (六个ITP口)6GK1 105-2AB10 工业以太网OSM TP62 (六个RJ45口)6GK1 105-2AE00 工业以太网OSM TP22 (二个RJ45口)6GK1 105-4AA00 工业以太网OSM BC08 (八个BFOC口)6GK1 102-6AA00 工业以太网ELS TP40 (二个RJ45口)6GK1 102-6AB00 工业以太网ELS TP40M (二个RJ45口)6GK1 102-7AA00 工业以太网ELS TP80 (八个RJ45口)6GK5 104-2BB00-2AA3 X104-2(四个RJ45口，两个BFOC)6GK5 106-1BB00-2AA3 X106-1(六个RJ45口，一个BFOC)6GK5 108-0BA00-2AA3 X108(八个RJ45口)(星型连接）6GK5 204-2BB00-2AA3 X204-2(四个RJ45口，两个BFOC，PROFINET)6GK5 206-1BB00-2AA3 X206-1(六个RJ45口，一个BFOC，PROFINET)6GK5 208-0BA00-2AA3 X208(八个RJ45口,PROFINET）6GK5 208-0HA00-2AA6 X208PRO （八个RJ45口，防护等级：IP65）6GK5 204-0BA00-2BA3 X204IRT （四个RJ45口）6GK5 202-2BB00-2BA3 X202-2IRT （二个RJ45口，两个BFOC）6GK1 105-3AA10 工业以太网ESM (八个ITP口)6GK1 105-3AB10 工业以太网ESM (八个RJ45口)6GK1 105-3AC00 工业以太网ESM (四个RJ45口)6GK1 100-2AB00 工业以太网OMC TP11 (多模光纤)6GK1 100-2AC00 工业以太网OMC TP11-LD (单模光纤)软件6GK1 716-1CB63-3AA0 S7-CP1613/Windows NT 4.0，2000网卡驱动程序6GK1 716-1TB63-3AA0 TF-CP1613/Windows NT 4.0，2000网卡驱动程序6GK1 716-1PB63-3AA0 PG-CP1613/Windows NT 4.0，2000网卡驱动程序6GK1 716-0HB63-3AA0 S7-REDCONNECT/Windows NT 4.0，2000网卡冗余软件6GK1 704-1CW63-3AA0 S7-SOFTNET/Windows V6.0 网卡驱动程序6GK1 704-1PW63-3AA0 PG-SOFTNET/Windows V6.0 网卡驱动程序6ES7180-0AA00-0XA0 IM 180, 主站接口板，包括ASPC2芯片6ES7181-0AA01-0XA0 ISA总线的IM180载体板6ES7182-0AA01-0XA0 IM 182, 从站接口板. 包括SPC3芯片6ES7183-0AA01-0XA0 IM 183, 从站接口板. 包括SPC3芯片6ES7184-0AA00-0XA0 IM 184, 从站接口板. 包括LSPM2芯片6ES7 195-3BA00-0Y A0 PROFIBUS 开发包46GK1 970-1BA10-0AA1 西门子工业以态网手册6GK1 970-5CA20-0AA1 西门子PROFIBUS网络手册6GK1 975-1AA00-3AA0 西门子网络电器手册（通讯，产品等）6GK1 500-0AA10 PROFIBUS总线端子9.6-12000 K BIT/S，带1.5M连接电缆6GK1 500-0AB00 PROFIBUS总线端子9.6-1500 K BIT/S，带3.0M连接电缆6GK1 500-0DA00 PROFIBUS总线端子有PG接口，带1.5M连接电缆。
联想Flex System Fabric EN4093R 10Gb可扩展交换机产品指南说明书
Lenovo Flex System Fabric EN4093R 10Gb Scalable SwitchProduct GuideThe Lenovo® Flex System Fabric EN4093R 10Gb Scalable Switch provides unmatched scalability, port flexibility, and performance. The switch also delivers innovations to help address several networking concerns today and provides capabilities that help you prepare for the future.This switch can support up to 64x 10 Gb Ethernet connections while offering Layer 2/3 switching, in addition to OpenFlow and "easy connect" modes. It installs within the I/O module bays of the Flex System™ Enterprise Chassis. This switch can help clients migrate to a 10 Gb or 40 Gb Ethernet infrastructure, offers cloud-ready virtualization features (such as Virtual Fabric and VMready®), and is Software Defined Network (SDN) ready. The EN4093R 10Gb Scalable Switch is shown in the following figure.Figure 1. Lenovo Flex System Fabric EN4093R 10Gb Scalable SwitchDid you know?The base switch configuration comes standard with 24x 10 GbE port licenses that can be assigned to internal connections or external SFP+ or QSFP+ ports with flexible port mapping. For example, this feature allows you to trade off four 10 GbE ports for one 40 GbE port (or vice versa) or trade off one external 10 GbE SFP+ port for one internal 10 GbE port (or vice versa). You then have the flexibility of turning on more ports when you need them by using Lenovo's Features on Demand upgrade licensing capabilities that provide “pay as you grow” scalability without the need to buy more hardware.The EN4093R is cloud ready with support for VM aware networking and advanced NIC virtualization technologies, such as Unified Fabric Port (UFP). In addition, the switch offers different operational modes (from "easy connect" transparent networking connectivity to Layer 3 functionality) to satisfy diverse client networking requirements.The EN4093R switch is SDN-ready with support for OpenFlow. OpenFlow is the protocol that enables the network administrator to easily configure and manage virtual networks that control traffic on a "per-flow" basis. OpenFlow creates multiple independent virtual networks and related policies without dealing with the complexities of the underlying physical network and protocols.With support for Converged Enhanced Ethernet (CEE), the EN4093R can be used as an FCoE transit device and is ideal for network-attached storage (NAS) and iSCSI environments.Click here to check for updatesFigure 2. Front panel of the Flex System Fabric EN4093R 10Gb Scalable SwitchThe front panel includes the following components:System LEDs that display the status of the switch module and the network.One mini-USB RS-232 console port that provides another means to configure the switch module.14x SFP/SFP+ ports to attach SFP/SFP+ transceivers for 1 GbE or 10 GbE connections or SFP+ DAC cables for 10 GbE connections.2x QSFP+ ports to attach QSFP+ transceivers or DAC cables for 40 GbE or 4x 10 GbE connections.1x RJ-45 10/100/1000 Mb Ethernet port for out-of-band management.The supported transceivers and cables are listed in the following table. Table 5. Supported transceivers and direct-attach cablesDescription Part number FeaturecodeMaximumquantitysupportedSerial console cablesFlex System Management Serial Access Cable Kit90Y9338A2RR1 SFP transceivers - 1 GbELenovo 1000BASE-T (RJ-45) SFP Transceiver (no 10/100 Mbps support)00FE333A5DL14 Lenovo 1000BASE-SX SFP Transceiver81Y1622326914 Lenovo 1000BASE-LX SFP Transceiver90Y9424A1PN14 SFP+ transceivers - 10 GbELenovo Dual Rate 1/10Gb SX/SR SFP+ Transceiver00MY034ATTJ14 Lenovo 10Gb SFP+ SR Transceiver (10GBASE-SR)46C3447505314 Lenovo 10GBASE-LR SFP+ Transceiver00FE331B0RJ14 Lenovo 10GBASE-T SFP+ Transceiver7G17A03130AVV114 Optical cables for 1 GbE SX SFP, 10 GbE SR SFP+, and 40 GbE SR QSFP+ BiDi transceiversLenovo 1m LC-LC OM3 MMF Cable00MN502ASR614 Lenovo 3m LC-LC OM3 MMF Cable00MN505ASR714 Lenovo 5m LC-LC OM3 MMF Cable00MN508ASR814 Lenovo 10m LC-LC OM3 MMF Cable00MN511ASR914 Lenovo 15m LC-LC OM3 MMF Cable00MN514ASRA14 Lenovo 25m LC-LC OM3 MMF Cable00MN517ASRB14 Lenovo 30m LC-LC OM3 MMF Cable00MN520ASRC14 SFP+ active optical cables - 10 GbELenovo 1m SFP+ to SFP+ Active Optical Cable00YL634ATYX14 Lenovo 3m SFP+ to SFP+ Active Optical Cable00YL637ATYY14 Lenovo 5m SFP+ to SFP+ Active Optical Cable00YL640ATYZ14 Lenovo 7m SFP+ to SFP+ Active Optical Cable00YL643ATZ014 Lenovo 15m SFP+ to SFP+ Active Optical Cable00YL646ATZ114 Lenovo 20m SFP+ to SFP+ Active Optical Cable00YL649ATZ214 SFP+ direct-attach cables - 10 GbELenovo 1m Passive SFP+ DAC Cable90Y9427A1PH14 Lenovo 1.5m Passive SFP+ DAC Cable00AY764A51N14 Lenovo 2m Passive SFP+ DAC Cable00AY765A51P14 Lenovo 3m Passive SFP+ DAC Cable90Y9430A1PJ14 Lenovo 5m Passive SFP+ DAC Cable90Y9433A1PK14 Lenovo 7m Passive SFP+ DAC Cable00D6151A3RH14 QSFP+ transceivers - 40 GbELenovo 40GBase QSFP+ Bi-Directional Transceiver00YL631ATYW2 Lenovo 40GBASE-SR4 QSFP+ Transceiver49Y7884A1DR2 Lenovo 40GBASE-iSR4 QSFP+ Transceiver00D9865ASTM2 Lenovo 40GBASE-eSR4 QSFP+ Transceiver00FE325A5U92 Lenovo 40GBASE-LR4 QSFP+ Transceiver00D6222A3NY2Optical cables for 40 GbE QSFP+ SR4/iSR4/eSR4 transceivers Lenovo 10m QSFP+ MPO-MPO OM3 MMF Cable 00VX003AT2U 2Lenovo 30m QSFP+ MPO-MPO OM3 MMF Cable00VX005AT2V 2Optical breakout cables for 40 GbE QSFP+ iSR4/eSR4 transceivers Lenovo 1m MPO-4xLC OM3 MMF Breakout Cable 00FM412A5UA 2Lenovo 3m MPO-4xLC OM3 MMF Breakout Cable 00FM413A5UB 2Lenovo 5m MPO-4xLC OM3 MMF Breakout Cable 00FM414A5UC2QSFP+ active optical cables - 40 GbELenovo 1m QSFP+ to QSFP+ Active Optical Cable 7Z57A04256AX422Lenovo 3m QSFP+ to QSFP+ Active Optical Cable 00YL652ATZ32Lenovo 5m QSFP+ to QSFP+ Active Optical Cable 00YL655ATZ42Lenovo 7m QSFP+ to QSFP+ Active Optical Cable 00YL658ATZ52Lenovo 15m QSFP+ to QSFP+ Active Optical Cable 00YL661ATZ62Lenovo 20m QSFP+ to QSFP+ Active Optical Cable 00YL664ATZ72QSFP+ active optical breakout cables - 40 GbE to 4x10 GbE Lenovo 1M QSFP+ to 4xSFP+ Active Optical Cable 00YL667ATZ82Lenovo 3M QSFP+ to 4xSFP+ Active Optical Cable 00YL670ATZ92Lenovo 5M QSFP+ to 4xSFP+ Active Optical Cable 00YL673ATZA 2QSFP+ direct-attach cables - 40 GbE Lenovo 1m Passive QSFP+ DAC Cable 49Y7890A1DP 2Lenovo 3m Passive QSFP+ DAC Cable 49Y7891A1DQ 2Lenovo 5m Passive QSFP+ DAC Cable 00D5810A2X82Lenovo 7m Passive QSFP+ DAC Cable 00D5813A2X92QSFP+ breakout cables - 40 GbE to 4x10 GbELenovo 1m Passive QSFP+ to SFP+ Breakout DAC Cable 49Y7886A1DL 2Lenovo 3m Passive QSFP+ to SFP+ Breakout DAC Cable 49Y7887A1DM 2Lenovo 5m Passive QSFP+ to SFP+ Breakout DAC Cable49Y7888A1DN2DescriptionPart number Featurecode Maximum quantity supportedThe network cables that can be used with the switch are listed in the following table.Table 6. EN4093R network cabling requirementsTransceiver Standard Cable Connector 40 Gb Ethernet40Gb SR QSFP+ BiDi (00YL631)40GBASE-SRBiDiUp to 30 m with fiber optic cables supplied by Lenovo (seeTable 5); up to 100 m with OM3 or up to 150 m with OM4multimode fiber optic cable.LC40Gb SR4 QSFP+ (49Y7884)40GBASE-SR410 m or 30 m MPO fiber optic cables supplied byLenovo (see Table 5); up to 100 m with OM3 or up to 150 mwith OM4 multimode fiber optic cable.MPO40Gb iSR4 QSFP+ (00D9865)40GBASE-SR410 m or 30 m MPO fiber optic cables or MPO-4xLCbreakout cables up to 5 m supplied by Lenovo (see Table5); up to 100 m with OM3 or up to 150 m with OM4multimode fiber optic cable.MPO40Gb eSR4 QSFP+ (00FE325)40GBASE-SR410 m or 30 m MPO fiber optic cables or MPO-4xLCbreakout cables up to 5 m supplied by Lenovo (see Table5); up to 300 m with OM3 or up to 400 m with OM4multimode fiber optic cable.MPO40Gb LR4 QSFP+(00D6222)40GBASE-LR41310 nm single-mode fiber optic cable up to 10 km.LCActive optical cable40GBASE-SR4QSFP+ to QSFP+ active optical cables up to 1 m; QSFP+to 4x SFP+ active optical break-out cables up to 5 m for 4x10 GbE SFP+ connections out of a 40 GbE port (see Table5)QSFP+Direct attach copper cable40GBASE-CR4QSFP+ to QSFP+ DAC cables up to 7 m; QSFP+ to4x SFP+ DAC break-out cables up to 5 m for 4x 10 GbESFP+ connections out of a 40 GbE port (see Table 5).QSFP+ 10 Gb Ethernet10Gb SR SFP+ (46C3447) 1/10Gb SFP+ (00MY034)10GBASE-SR Up to 30 m with fiber optic cables supplied by Lenovo (seeTable 5); up to 300 m with OM3 or up to 400 m with OM4multimode fiber optic cable.LC10Gb LR SFP+ (00FE331)10GBASE-LR1310 nm single-mode fiber optic cable up to 10 km.LC 10Gb RJ-45 SFP+(7G17A03130)10GBASE-T UTP Category 6a or 7 up to 30 meters.RJ-45 Active optical cable10GBASE-SR SFP+ active optical cables up to 20 m (see Table 5)SFP+ Direct attach copper cable10GSFP+Cu SFP+ DAC cables up to 7 m (see Table 5).SFP+ 1 Gb Ethernet1Gb RJ-45 SFP (00FE333)1000BASE-T UTP Category 5, 5E, or 6 up to 100 meters.RJ-451Gb SX SFP (81Y1622) 1/10Gb SFP+ (00MY034)1000BASE-SX Up to 30 m with fiber optic cables supplied by Lenovo (seeTable 5); 850 nm multimode fiber cable 50 µ (OM2) up to550 m or 62.5 µ (OM1) up to 220 m.LC1Gb LX SFP (90Y9424)1000BASE-LX1310 nm single-mode fiber optic cable up to 10 km.LC Management ports1 GbE management port1000BASE-T UTP Category 5, 5E, or 6 up to 100 meters.RJ-45 RS-232 management port RS-232DB-9-to-mini-USB or RJ-45-to-mini-USB console cable(comes with the optional Cable Kit, 90Y9338).Mini-USBFigure 3. Location of the I/O bays in the Flex System Enterprise ChassisThe EN4093R switches can be installed in bays 1, 2, 3, and 4 of the Enterprise chassis. A supported adapter must be installed in the corresponding slot of the compute node. Each adapter can use up to four lanes to connect to the respective I/O module bay. The EN4093R can use up to three of the four lanes.In compute nodes that have an integrated dual-port 10 GbE network interface controller (NIC), NIC ports are routed to bays 1 and 2 with a specialized periscope connector, and the adapter is not required. However, the periscope connector can be replaced with the adapter when needed. In such a case, integrated NIC is disabled. With flexible port mapping, there is no need to buy switch upgrades for 4-port and 8-port adapters if the total number of port licenses on the switch does not exceed the number of external (upstream network ports) and internal (compute node network ports) connections that are used.The following table shows compatibility information for the EN4093R and Flex System chassis.Table 7. Flex System chassis compatibilityThe midplane connections between the adapters that are installed in the compute nodes to the I/O module bays in the chassis are listed in the following table. Half-wide compute nodes support up to two adapters, and full-wide compute nodes support up to four adapters.Table 8. Adapter to I/O bay correspondenceI/O adapter slotin the compute node Port on the adapter Corresponding I/O module bay in the chassisBay 1Bay 2Bay 3Bay 4Slot 1Port 1YesPort 2YesPort 3YesPort 4YesPort 5YesPort 6YesPort 7*Port 8*Slot 2Port 1YesPort 2YesPort 3YesPort 4YesPort 5YesPort 6YesPort 7*Port 8*Slot 3(full-wide compute nodes only)Port 1YesPort 2Yes Port 3YesPort 4Yes Port 5YesPort 6Yes Port 7*Port 8*Slot 4(full-wide compute nodes only)Port 1YesPort 2Yes Port 3YesPort 4Yes Port 5YesPort 6Yes Port 7*Port 8** Ports 7 and 8 are routed to I/O bays 1 and 2 (Slot 1 and Slot 3) or 3 and 4 (Slot 2 and Slot 4), but these ports cannot be used with the EN4093R switch.The following table lists the adapters that are supported by the I/O module.Table 9. Network adaptersDescription Part number Featurecode50 Gb EthernetThinkSystem QLogic QL45212 Flex 50Gb 2-Port Ethernet Adapter7XC7A05843B2VT ThinkSystem QLogic QL45262 Flex 50Gb 2-Port Ethernet Adapter with iSCSI/FCoE7XC7A05845B2VV25 Gb EthernetThinkSystem QLogic QL45214 Flex 25Gb 4-Port Ethernet Adapter7XC7A05844B2VU10 Gb EthernetEmbedded 10Gb Virtual Fabric Adapter (2-port)†None None Flex System CN4052S 2-port 10Gb Virtual Fabric Adapter00AG540ATBT Flex System CN4052S 2-port 10Gb Virtual Fabric Adapter Advanced01CV780AU7X Flex System CN4054S 4-port 10Gb Virtual Fabric Adapter00AG590ATBS Flex System CN4054S 4-port 10Gb Virtual Fabric Adapter Advanced01CV790AU7Y1 Gb EthernetEmbedded 1 Gb Ethernet controller (2-port)*None None† The Embedded 10Gb Virtual Fabric Adapter is built into selected compute nodes.* The Embedded 1 Gb Ethernet controller is built into selected compute nodes.Network connectivityThe following table lists the 10 Gb, 25 Gb, and 40 Gb Ethernet network switches that are offered by Lenovo that can be used with the EN4093R switch in Flex System network connectivity solutions.Table 10. Network switchesDescription Part number 10 Gb Ethernet switchesLenovo ThinkSystem NE1032 RackSwitch (Rear to Front)7159A1X Lenovo ThinkSystem NE1032T RackSwitch (Rear to Front)7159B1X Lenovo ThinkSystem NE1064TO RackSwitch (Rear to Front, ONIE)7Z330O11WW Lenovo ThinkSystem NE1072T RackSwitch (Rear to Front)7159C1X Lenovo RackSwitch G8272 (Rear to Front)7159CRW25 Gb Ethernet switchesLenovo ThinkSystem NE2572 RackSwitch (Rear to Front)7159E1X Lenovo ThinkSystem NE2572O RackSwitch (Rear to Front, ONIE)7Z210O21WW Lenovo ThinkSystem NE2580O RackSwitch (Rear to Front, ONIE)7Z330O21WW 100 Gb Ethernet switches (support 40 GbE connectivity)Lenovo ThinkSystem NE10032 RackSwitch (Rear to Front)7159D1X Lenovo ThinkSystem NE10032O RackSwitch (Rear to Front, ONIE)7Z210O11WWFor more information, see the list of Product Guides in the Top-of-rack Switches category:/servers/options/switchesStorage connectivityThe following table lists the external storage systems that are currently offered by Lenovo that can be used with the EN4093R switch for external NAS or iSCSI SAN storage connectivity.Table 11. External storage systems: DE SeriesDescription Part number Worldwide JapanLenovo ThinkSystem DE2000HLenovo ThinkSystem DE2000H 10GBASE-T Hybrid Flash Array LFF (16 GB cache)7Y70A003WW7Y701001JP Lenovo ThinkSystem DE2000H 10GBASE-T Hybrid Flash Array SFF (16 GB cache)7Y71A002WW7Y711005JP Lenovo ThinkSystem DE2000H iSCSI Hybrid Flash Array LFF (16 GB cache)7Y70A004WW7Y701000JP Lenovo ThinkSystem DE2000H iSCSI Hybrid Flash Array SFF (16 GB cache)7Y71A003WW7Y711006JP Lenovo ThinkSystem DE4000HLenovo ThinkSystem DE4000H iSCSI Hybrid Flash Array 4U60 (16 GB cache)7Y77A000WW7Y771002JP Lenovo ThinkSystem DE4000H iSCSI Hybrid Flash Array LFF (16 GB cache)7Y74A002WW7Y74A002JP Lenovo ThinkSystem DE4000H iSCSI Hybrid Flash Array SFF (16 GB cache)7Y75A001WW7Y75A001JP Lenovo ThinkSystem DE4000FLenovo ThinkSystem DE4000F iSCSI All Flash Array SFF (16 GB cache)7Y76A002WW7Y76A002JP Lenovo ThinkSystem DE4000F iSCSI All Flash Array SFF (64 GB cache)7Y76A007WW7Y76A00AJP Lenovo ThinkSystem DE6000HLenovo ThinkSystem DE6000H iSCSI Hybrid Flash Array 4U60 (32 GB cache)7Y80A002WW7Y801000JP Lenovo ThinkSystem DE6000H iSCSI Hybrid Flash Array SFF (32 GB cache)7Y78A002WW7Y781000JP Lenovo ThinkSystem DE6000FLenovo ThinkSystem DE6000F iSCSI All Flash Array SFF (128 GB cache)7Y79A002WW7Y79A002JPTable 12. External storage systems: DM SeriesDescription Part number Lenovo ThinkSystem DM3000HThinkSystem DM3000H Hybrid Storage Array (2U12 LFF, CTO only)7Y42CTO1WW ThinkSystem DM3000H, 48TB (12x 4TB HDDs), 10GBASE-T, ONTAP 9.5 Fundamentals7Y421003EA* ThinkSystem DM3000H, 48TB (12x 4TB HDDs), 10GBASE-T, ONTAP 9.57Y421007EA* ThinkSystem DM3000H, 48TB (12x 4TB HDDs), 16Gb FC / 10GbE SFP+, ONTAP 9.5 Fundamentals7Y421009NA* ThinkSystem DM3000H, 48TB (12x 4TB HDDs), 16Gb FC / 10GbE SFP+, ONTAP 9.5 Fundamentals7Y421002EA* ThinkSystem DM3000H, 48TB (12x 4TB HDDs), 16Gb FC / 10GbE SFP+, ONTAP 9.57Y421006EA* ThinkSystem DM3000H, 96TB (12x 8TB HDDs), 10GBASE-T, ONTAP 9.5 Fundamentals7Y421005EA* ThinkSystem DM3000H, 96TB (12x 8TB HDDs), 10GBASE-T, ONTAP 9.57Y421001EA* ThinkSystem DM3000H, 96TB (12x 8TB HDDs), 16Gb FC / 10GbE SFP+, ONTAP 9.5 Fundamentals7Y421004EA* ThinkSystem DM3000H, 96TB (12x 8TB HDDs), 16Gb FC / 10GbE SFP+, ONTAP 9.57Y421008EA* Lenovo ThinkSystem DM5000HThinkSystem DM5000H Hybrid Storage Array (2U24 SFF, CTO only)7Y57CTO1WW ThinkSystem DM5000H, 11.5TB (12x 960GB SSDs), 10GBASE-T, ONTAP 9.5 Fundamentals7Y571004EA* ThinkSystem DM5000H, 11.5TB (12x 960GB SSDs), 10GBASE-T, ONTAP 9.57Y57100LEA* ThinkSystem DM5000H, 11.5TB (12x 960GB SSDs), 16Gb FC / 10GbE SFP+, ONTAP 9.5 Fundamentals7Y571011NA* ThinkSystem DM5000H, 11.5TB (12x 960GB SSDs), 16Gb FC / 10GbE SFP+, ONTAP 9.5 Fundamentals7Y571003EA*Description Part number ThinkSystem DM5000H, 11.5TB (12x 960GB SSDs), 16Gb FC / 10GbE SFP+, ONTAP 9.57Y57100KEA* ThinkSystem DM5000H, 14.4TB (12x 1.2TB HDDs), 10GBASE-T, ONTAP 9.5 Fundamentals7Y57100CEA*7Y57100BEA* ThinkSystem DM5000H, 14.4TB (12x 1.2TB HDDs), 16Gb FC / 10GbE SFP+, ONTAP 9.5FundamentalsThinkSystem DM5000H, 21.6TB (12x 1.8TB HDDs), 10GBASE-T, ONTAP 9.5 Fundamentals7Y57100GEA* ThinkSystem DM5000H, 21.6TB (12x 1.8TB HDDs), 16Gb FC / 10GbE SFP+, ONTAP 9.57Y57100FEA* FundamentalsThinkSystem DM5000H, 23TB (24x 960GB SSDs), 10GBASE-T, ONTAP 9.5 Fundamentals7Y571006EA* ThinkSystem DM5000H, 23TB (24x 960GB SSDs), 10GBASE-T, ONTAP 9.57Y57100NEA* ThinkSystem DM5000H, 23TB (24x 960GB SSDs), 16Gb FC / 10GbE SFP+, ONTAP 9.5 Fundamentals7Y571005EA* ThinkSystem DM5000H, 23TB (24x 960GB SSDs), 16Gb FC / 10GbE SFP+, ONTAP 9.57Y57100MEA* ThinkSystem DM5000H, 28.8TB (24x 1.2TB HDDs), 10GBASE-T, ONTAP 9.5 Fundamentals7Y57100EEA* ThinkSystem DM5000H, 28.8TB (24x 1.2TB HDDs), 10GBASE-T, ONTAP 9.57Y57100VEA*7Y57100DEA* ThinkSystem DM5000H, 28.8TB (24x 1.2TB HDDs), 16Gb FC / 10GbE SFP+, ONTAP 9.5FundamentalsThinkSystem DM5000H, 43.2TB (24x 1.8TB HDDs), 10GBASE-T, ONTAP 9.5 Fundamentals7Y57100JEA* ThinkSystem DM5000H, 43.2TB (24x 1.8TB HDDs), 10GBASE-T, ONTAP 9.57Y571002EA*7Y571010NA* ThinkSystem DM5000H, 43.2TB (24x 1.8TB HDDs), 16Gb FC / 10GbE SFP+, ONTAP 9.5Fundamentals7Y57100HEA* ThinkSystem DM5000H, 43.2TB (24x 1.8TB HDDs), 16Gb FC / 10GbE SFP+, ONTAP 9.5FundamentalsThinkSystem DM5000H, 43.2TB (24x 1.8TB HDDs), 16Gb FC / 10GbE SFP+, ONTAP 9.57Y57100ZEA* ThinkSystem DM5000H, 46TB (12x 3.84TB SSDs), 10GBASE-T, ONTAP 9.5 Fundamentals7Y571008EA* ThinkSystem DM5000H, 46TB (12x 3.84TB SSDs), 10GBASE-T, ONTAP 9.57Y57100QEA* ThinkSystem DM5000H, 46TB (12x 3.84TB SSDs), 16Gb FC / 10GbE SFP+, ONTAP 9.5 Fundamentals7Y571007EA* ThinkSystem DM5000H, 46TB (12x 3.84TB SSDs), 16Gb FC / 10GbE SFP+, ONTAP 9.57Y57100PEA* ThinkSystem DM5000H, 92TB (24x 3.84TB SSDs), 10GBASE-T, ONTAP 9.5 Fundamentals7Y57100AEA* ThinkSystem DM5000H, 92TB (24x 3.84TB SSDs), 10GBASE-T, ONTAP 9.57Y57100REA* ThinkSystem DM5000H, 92TB (24x 3.84TB SSDs), 16Gb FC / 10GbE SFP+, ONTAP 9.5 Fundamentals7Y571009EA* ThinkSystem DM5000H, 92TB (24x 3.84TB SSDs), 16Gb FC / 10GbE SFP+, ONTAP 9.57Y57100SEA* Lenovo ThinkSystem DM5000FThinkSystem DM5000F Flash Storage Array (2U24 SFF, CTO only)7Y41CTO1WW ThinkSystem DM5000F, 11.5TB (12x 960GB SSDs), 10GBASE-T, ONTAP 9.57Y411002EA* ThinkSystem DM5000F, 11.5TB (12x 960GB SSDs), 16Gb FC / 10GbE SFP+, ONTAP 9.57Y411001EA* ThinkSystem DM5000F, 23TB (24x 960GB SSDs), 10GBASE-T, ONTAP 9.57Y411004EA* ThinkSystem DM5000F, 23TB (24x 960GB SSDs), 16Gb FC / 10GbE SFP+, ONTAP 9.57Y411003EA* ThinkSystem DM5000F, 46TB (12x 3.84TB SSDs), 10GBASE-T, ONTAP 9.57Y411006EA* ThinkSystem DM5000F, 46TB (12x 3.84TB SSDs), 16Gb FC / 10GbE SFP+, ONTAP 9.57Y411005EA* ThinkSystem DM5000F, 92TB (24x 3.84TB SSDs), 10GBASE-T, ONTAP 9.57Y411007EA* ThinkSystem DM5000F, 92TB (24x 3.84TB SSDs), 16Gb FC / 10GbE SFP+, ONTAP 9.57Y411000EA* Lenovo ThinkSystem DM7000HThinkSystem DM7000H Hybrid Storage Array (3U, CTO only)7Y56CTO1WW Lenovo ThinkSystem DM7000FThinkSystem DM7000F Flash Storage Array (3U, CTO only)7Y40CTO1WW * Preconfigured models that are available only in North America (part numbers that have NA at the end) or EMEA (part numbers thatTrademarksLenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web athttps:///us/en/legal/copytrade/.The following terms are trademarks of Lenovo in the United States, other countries, or both:Lenovo®Flex SystemNMotion®RackSwitchThinkSystem®VMready®XClarity®The following terms are trademarks of other companies:Intel® is a trademark of Intel Corporation or its subsidiaries.Hyper-V® and Microsoft® are trademarks of Microsoft Corporation in the United States, other countries, or both. Other company, product, or service names may be trademarks or service marks of others.。
Lenovo ThinkAgile HX7521 Certified Node for SAP HA
Lenovo ThinkAgile HX7521 Certified Node forSAP HANA (Xeon SP Gen 1)Product Guide (withdrawn product)Lenovo ThinkAgile HX Certified Nodes for SAP HANA are designed for deploying industry-leading hyperconvergence software from Nutanix on Lenovo enterprise platforms that feature the Intel Xeon Processor Scalable Family.The ThinkAgile HX Certified Nodes for SAP HANA deliver fully validated and integrated Lenovo hardware and firmware, certified and preloaded with Nutanix software. Nutanix brings the benefits of web-scale technologies to enterprise applications through enterprise storage, data protection, infrastructure resilience, management and analytics, and security.The ThinkAgile HX7521 Certified Node for SAP HANA is a 2U rack-mount system that supports two processors, up to 3 TB of 2666 MHz TruDDR4 memory, 24x SFF hot-swap drive bays with an extensive choice of SAS/SATA SSDs and HDDs, and flexible network connectivity options with 1/10 GbE RJ-45,10 GbE SFP+, and 10/25 GbE SFP28 ports.The ThinkAgile HX7521 Certified Node for SAP HANA is certified by SAP for deploying SAP HANA solutions on hyperconverged infrastructure (HCI) in production environments.The ThinkAgile HX7521 Certified Node for SAP HANA is shown in the following figure.Figure 1. Lenovo ThinkAgile HX7521 Certified Node for SAP HANADid you know?The ThinkAgile HX Certified Nodes for SAP HANA are built on industry-leading Lenovo ThinkSystem servers that feature enterprise-class reliability, management, and security.The ThinkAgile HX Certified Nodes for SAP HANA deliver fully validated and integrated hardware and firmware that is certified with Nutanix software.Click here to check for updatesFigure 2. ThinkAgile HX7521 Certified Node for SAP HANA front viewThe front of the ThinkAgile HX7521 Certified Node for SAP HANA includes the following components: 20x SAS/SATA and 4x AnyBay, or 12x SAS/SATA and 4x AnyBay 2.5-inch hot-swap drive bays One VGA portOne USB 2.0 port with XClarity Controller accessOne USB 3.0 portA Power buttonStatus LEDsFigure 3. ThinkAgile HX7521 Certified Node for SAP HANA rear viewThe rear of the ThinkAgile HX7521 Certified Node for SAP HANA includes the following components: Up to six PCIe expansion slots (2 reserved for SAS HBAs)One LOM card slotOne 1 GbE port for XClarity ControllerOne VGA portTwo USB 3.0 portsTwo hot-swap power suppliesMemoryThe ThinkAgile HX7521 Certified Node for SAP HANA for SAP HANA supports Lenovo TruDDR4 memory. TruDDR4 memory uses the highest-quality components sourced from Tier 1 DRAM suppliers and only memory that meets strict requirements is selected. It is compatibility tested and tuned to maximize performance and reliability.The ThinkAgile HX7521 Certified Node for SAP HANA supports 12 or 24 DIMMs. Each processor has six memory channels, and there are two DIMM slots per channel.1.25m Cat6 Green Cable 00WE131AVFY 1.5m Cat6 Green Cable 00WE135AVFZ 3m Cat6 Green Cable 00WE139AVG010m Cat6 Green Cable 90Y3718A1MT 25m Cat6 Green Cable90Y3727A1MWDescriptionPart number Feature codeThe following table lists transceivers and cables for the 10 GbE SFP+ ports.Table 11. Transceivers and cables for 10 GbE SFP+ portsDescriptionPart numberFeature code10 GbE SFP+ SR transceivers for 10 GbE SFP+ ports Lenovo 10GBASE-SR SFP+ Transceiver 46C34475053Lenovo 10GBASE-LR SFP+ Transceiver 00FE331B0RJOptical cables for 10 GbE SFP+ SR transceivers Lenovo 0.5m LC-LC OM3 MMF Cable 00MN499ASR5Lenovo 1m LC-LC OM3 MMF Cable 00MN502ASR6Lenovo 3m LC-LC OM3 MMF Cable 00MN505ASR7Lenovo 5m LC-LC OM3 MMF Cable 00MN508ASR8Lenovo 10m LC-LC OM3 MMF Cable 00MN511ASR9Lenovo 15m LC-LC OM3 MMF Cable 00MN514ASRA Lenovo 25m LC-LC OM3 MMF Cable00MN517ASRB Passive SFP+ DAC cables for 10 GbE SFP+ ports Lenovo 0.5m Passive SFP+ DAC Cable 00D6288A3RG Lenovo 1m Passive SFP+ DAC Cable 90Y9427A1PH Lenovo 1.5m Passive SFP+ DAC Cable 00AY764A51N Lenovo 2m Passive SFP+ DAC Cable 00AY765A51P Lenovo 3m Passive SFP+ DAC Cable 90Y9430A1PJ Lenovo 5m Passive SFP+ DAC Cable 90Y9433A1PK Lenovo 7m Passive SFP+ DAC Cable00D6151A3RHActive SFP+ DAC cables for 10 GbE SFP+ ports Lenovo 1m Active DAC SFP+ Cable 00VX111AT2R Lenovo 3m Active DAC SFP+ Cable 00VX114AT2S Lenovo 5m Active DAC SFP+ Cable00VX117AT2TSFP+ active optical cables for 10 GbE SFP+ ports Lenovo 1m SFP+ to SFP+ Active Optical Cable 00YL634ATYX Lenovo 3m SFP+ to SFP+ Active Optical Cable 00YL637ATYY Lenovo 5m SFP+ to SFP+ Active Optical Cable 00YL640ATYZ Lenovo 7m SFP+ to SFP+ Active Optical Cable 00YL643ATZ0Lenovo 15m SFP+ to SFP+ Active Optical Cable 00YL646ATZ1Lenovo 20m SFP+ to SFP+ Active Optical Cable00YL649ATZ2The following table lists transceivers and cables for the 25 GbE SFP28 ports. Table 12. Transceivers and cables for 25 GbE SFP28 portsDescription Part number Feature code25 GbE SFP28 SR transceivers for 25 GbE SFP28 portsLenovo 25GBASE-SR SFP28 Transceiver7G17A03537AV1B Optical cables for 25 GbE SFP28 SR transceiversLenovo 0.5m LC-LC OM3 MMF Cable00MN499ASR5 Lenovo 1m LC-LC OM3 MMF Cable00MN502ASR6 Lenovo 3m LC-LC OM3 MMF Cable00MN505ASR7 Lenovo 5m LC-LC OM3 MMF Cable00MN508ASR8 Lenovo 10m LC-LC OM3 MMF Cable00MN511ASR9 Lenovo 15m LC-LC OM3 MMF Cable00MN514ASRA Lenovo 25m LC-LC OM3 MMF Cable00MN517ASRB Passive copper cables for 25 GbE SFP28 portsLenovo 1m Passive 25G SFP28 DAC Cable7Z57A03557AV1W Lenovo 3m Passive 25G SFP28 DAC Cable7Z57A03558AV1X Lenovo 5m Passive 25G SFP28 DAC Cable7Z57A03559AV1Y Active optical cables for 25 GbE SFP28 portsLenovo 3m 25G SFP28 Active Optical Cable7Z57A03541AV1F Lenovo 5m 25G SFP28 Active Optical Cable7Z57A03542AV1G Lenovo 10m 25G SFP28 Active Optical Cable7Z57A03543AV1H Lenovo 15m 25G SFP28 Active Optical Cable7Z57A03544AV1J Lenovo 20m 25G SFP28 Active Optical Cable7Z57A03545AV1KPower supplies and cablesThe ThinkAgile HX7521 Certified Nodes for SAP HANA ship with two 1100W (230V/115V) Platinum hot-swap power supplies listed in the following table.Table 13. Power suppliesDescription Featurecode QuantityThinkSystem 1100W (230V/115V) Platinum Hot-Swap Power Supply AVWF2The ThinkAgile HX7521 Certified Nodes for SAP HANA ship with or without power cords depending on the selected option. The following table lists the rack power cables and line cords that can be ordered for the ThinkAgile HX7521 Certified Nodes for SAP HANA.Table 14. Power cablesDescription PartnumberFeaturecodeRack power cables1.0m, 13A/100-250V, C13 to IEC 320-C14 Rack Power Cable4L67A08367B0N5 1.2m, 16A/100-250V, 2 Short C13s to Short C20 Rack Power Cable47C2491A3SW1.5m, 13A/100-250V, C13 to IEC 320-C14 Rack Power Cable4L67A08368B0N62.0m, 13A/125V-10A/250V, C13 to IEC 320-C14 Rack Power Cable4L67A083696570 2.5m, 16A/100-250V, 2 Long C13s to Short C20 Rack Power Cable47C2492A3SX 2.8m, 13A/125V-10A/250V, C13 to IEC 320-C14 Rack Power Cable4L67A083706400 2.8m, 16A/100-250V, 2 Short C13s to Long C20 Rack Power Cable47C2493A3SY 4.1m, 16A/100-250V, 2 Long C13s to Long C20 Rack Power Cable47C2494A3SZ 4.3m, 13A/125V-10A/250V, C13 to IEC 320-C14 Rack Power Cable4L67A083716583 Line cordsArgentina 2.8m, 10A/250V, C13 to IRAM 2073 Line Cord39Y79306222 Argentina 4.3m, 10A/250V, C13 to IRAM 2073 Line Cord81Y23846492 Australia/New Zealand 2.8m, 10A/250V, C13 to AS/NZS 3112 Line Cord39Y79246211 Australia/New Zealand 4.3m, 10A/250V, C13 to AS/NZS 3112 Line Cord81Y23836574 Brazil 2.8m, 10A/250V, C13 to NBR 14136 Line Cord69Y19886532 Brazil 4.3m, 10A/250V, C13 to NBR14136 Line Cord81Y23876404 China 2.8m, 10A/250V, C13 to GB 2099.1 Line Cord39Y79286210 China 4.3m, 10A/250V, C13 to GB 2099.1 Line Cord81Y23786580 Denmark 2.8m, 10A/250V, C13 to DK2-5a Line Cord39Y79186213 Denmark 4.3m, 10A/250V, C13 to DK2-5a Line Cord81Y23826575 Europe 2.8m, 10A/250V, C13 to CEE7-VII Line Cord39Y79176212 Europe 4.3m, 10A/250V, C13 to CEE7-VII Line Cord81Y23766572 India 2.8m, 10A/250V, C13 to IS 6538 Line Cord39Y79276269 India 4.3m, 10A/250V, C13 to IS 6538 Line Cord81Y23866567 Israel 2.8m, 10A/250V, C13 to SI 32 Line Cord39Y79206218 Israel 4.3m, 10A/250V, C13 to SI 32 Line Cord81Y23816579 Italy 2.8m, 10A/250V, C13 to CEI 23-16 Line Cord39Y79216217 Italy 4.3m, 10A/250V, C13 to CEI 23-16 Line Cord81Y23806493 Japan 2.8m, 12A/125V, C13 to JIS C-8303 Line cord46M2593A1RE Japan 2.8m, 12A/250V, C13 to JIS C-8303 Line Cord4L67A083576533 Japan 4.3m, 12A/125V, C13 to JIS C-8303 Line Cord39Y79266335 Japan 4.3m, 12A/250V, C13 to JIS C-8303 Line Cord4L67A083626495 Korea 2.8m, 12A/250V, C13 to KS C8305 Line Cord39Y79256219 Korea 4.3m, 12A/250V, C13 to KS C8305 Line Cord81Y23856494 South Africa 2.8m, 10A/250V, C13 to SABS 164 Line Cord39Y79226214 South Africa 4.3m, 10A/250V, C13 to SABS 164 Line Cord81Y23796576Switzerland 2.8m, 10A/250V, C13 to SEV 1011-S24507 Line Cord 39Y79196216Switzerland 4.3m, 10A/250V, C13 to SEV 1011-S24507 Line Cord 81Y23906578Taiwan 2.8m, 10A/250V, C13 to CNS 10917-3 Line Cord 81Y23756317Taiwan 2.8m, 15A/125V, C13 to CNS 10917-3 Line Cord 81Y23746402Taiwan 4.3m, 10A/250V, C13 to CNS 10917-3 Line Cord 81Y23896531Taiwan 4.3m, 15A/125V, C13 to CNS 10917-3 Line Cord 81Y23886530United Kingdom 2.8m, 10A/250V, C13 to BS 1363/A Line Cord 39Y79236215United Kingdom 4.3m, 10A/250V, C13 to BS 1363/A Line Cord 81Y23776577United States 2.8m, 10A/250V, C13 to NEMA 6-15P Line Cord 46M2592A1RF United States 2.8m, 13A/125V, C13 to NEMA 5-15P Line Cord 00WH5456401United States 4.3m, 10A/250V, C13 to NEMA 6-15P Line Cord 4L67A083616373United States 4.3m, 13A/125V, C13 to NEMA 5-15P Line Cord4L67A08360AX8ADescriptionPart number Feature code Rack installationThe ThinkAgile HX7521 Certified Nodes for SAP HANA ship with a rail kit. The following table lists the rail kit options that are available for selection.Table 15. Rack kit selection optionsDescription Feature codeQuantity (min / max)4-post rail kitsThinkSystem Tool-less Slide RailAXCA 0 / 1ThinkSystem Tool-less Slide Rail Kit with 2U CMA AXCH0 / 1Lockable front bezelThinkSystem 2U Security BezelAURX0 / 1Configuration note: One of the rail kits is required for selection.The following table summarizes the rail kit features and specifications.Table 16. Rail kit features and specifications summaryFeature Tool-less Slide RailWithout CMA With 2U CMA CMA Not included IncludedRail length 730 mm (28.74 in.)807 mm (31.8 in.)Rail typeFull-out slide (ball bearing)Tool-less installation Yes In-rack maintenance Yes 1U PDU support Yes 0U PDU support Limited*Rack type IBM and Lenovo 4-post, IEC standard-compliant Mounting holesSquare or roundTrademarksLenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web athttps:///us/en/legal/copytrade/.The following terms are trademarks of Lenovo in the United States, other countries, or both:Lenovo®AnyBay®Lenovo ServicesThinkAgile®ThinkSystem®TruDDR4XClarity®The following terms are trademarks of other companies:Intel® and Xeon® are trademarks of Intel Corporation or its subsidiaries.Linux® is the trademark of Linus Torvalds in the U.S. and other countries.Microsoft®, PowerShell, Windows PowerShell®, and Windows® are trademarks of Microsoft Corporation in the United States, other countries, or both.Other company, product, or service names may be trademarks or service marks of others.。
联想（北京）有限公司认证产品名称、型号规格表一
联想（北京）有限公司认证产品名称、型号规格表一产品类别 产品型号ThinkCentre M8200t、ThinkCentre M8210t、ThinkCentre M8220t、ThinkCentre M8230t、ThinkCentre M8240t、ThinkCentre M8250t、ThinkCentre M8260t、ThinkCentre M8270t、ThinkCentre M8280t、ThinkCentre M8290t。
ThinkCentre M8300t、ThinkCentre M8310t、ThinkCentre M8320t、ThinkCentre M8330t、ThinkCentre M8340t、ThinkCentre M8350t、ThinkCentre M8360t、ThinkCentre M8370t、ThinkCentre M8380t、ThinkCentre M8390t。
ThinkCentre M8000t、ThinkCentre M8010t、ThinkCentre M8020t、ThinkCentre M8030t、ThinkCentre M8040t、ThinkCentre M8050t、ThinkCentre M8060t、ThinkCentre M8070t、ThinkCentre M8080t、ThinkCentre M8090t。
ThinkCentre M6100t、ThinkCentreM6110t、ThinkCentre M6120t、ThinkCentre M6130t、ThinkCentre M6140t、ThinkCentreM6150t、ThinkCentre M6160t、ThinkCentre M6170t、ThinkCentre M6180t、ThinkCentreM6190t、ThinkCentre M6000t、ThinkCentre M6200t、ThinkCentre M6210t、ThinkCentreM6220t、ThinkCentre M6230t、ThinkCentre M6240t、ThinkCentre M6250t、ThinkCentreM6260t、ThinkCentre M6270t、ThinkCentre M6280t、ThinkCentre M6290t、ThinkCentreM5100t、ThinkCentre M5110t、ThinkCentre M5120t、ThinkCentre M5130t、ThinkCentreM5140t、ThinkCentre M5150t、ThinkCentre M5160t、ThinkCentre M5170t、ThinkCentre 台式电脑M5180t、ThinkCentre M5190t、ThinkCentre M5200t、ThinkCentre M5210t、ThinkCentreM5220t、ThinkCentre M5230t、ThinkCentre M5240t、ThinkCentre M5250t、ThinkCentreM5260t、ThinkCentre M5270t、ThinkCentre M5280t、ThinkCentre M5290tThinkCentre M8200s、ThinkCentre M8210s、ThinkCentre M8220s、ThinkCentreM8230s、ThinkCentre M8240s、ThinkCentre M8250s、ThinkCentre M8260s、ThinkCentreM8270s、ThinkCentre M8280s、ThinkCentre M8290s。
zilog eZ80F91 Mini Ethernet Module Quick Start Gui
An Company Copyright ©2010 by Zilog ®, Inc. All rights IntroductionThis quick qtart guide provides instructions and configuration information for Zilog’s eZ80F91 Mini Ethernet module, eZ80Acclaim!® Modular Development System (MDS) adapter board, and associated components. The eZ80F910100KIT and eZ80F910200KITG modular development kits are covered in this quick start guide.Kit ContentsFor a complete list of material shipped with the eZ80F91 Modular Development Kit (eZ80F910200KITG), refer to eZ80F910200KITG eZ80F91 Series Development Kit Packing List (PAK0015).System RequirementsTable 1 lists the system requirements for running ZDS II.Table 1. ZDS II System RequirementsRecommended ConfigurationMinimum Configuration •PC running MS Windows XP Professional •PC running MS Win2000–SP4/WinXP Professional•Pentium III/500 MHz or higher processor•Pentium II/233 MHz processor •128 MB RAM•96 MB RAM •110 MB hard disk space•25 MB hard disk space (documentation not installed)•Super VGA video adapter•Super VGA video adapter •CD-ROM drive•CD-ROM drive •One or more RS-232communication port •One or more RS-232 communication port ••USB high-speed port •USB high-speed porteZ80F91 Modular Development KitQuick Start Guide QS004611-0810eZ80F91 Modular Development KitInstallation OverviewThe eZ80F91 Mini Ethernet module is preinstalled on the eZ80Acclaim!® MDS adapter board. To set up the development kit, install the ZDS II software. Connect the kit to PC, using the USB Smart Cable or Serial Smart Cable, as appropriate. Connect power to the adapter board. Figure 1 displays the eZ80F91 Modular Development Kit.Previous versions of the development kit used the Serial Smart Cable. Newkits as of June 2006 uses the USB Smart Cable.Follow the steps below to install the cable available with your kit:1.Install the ZDS II software as described in Installing the ZDS II Software and KitDocumentation on page 3.Figure 1.The eZ80F91 Modular Development Kit2.Connect your PC to the eZ80Acclaim! MDS adapter board as follows:(a)If you are using the Serial Smart Cable, follow the instructions in Connecting theSerial Smart Cable to Your Computer on page 3.(b)If you are using the USB Smart Cable (not included with this kit), follow theinstructions in Installing the USB Smart Cable on page 3.3.Connect the 5 V DC power supply to the adapter board.4.Connect the development kit to your PC and run the supplied sample project asdescribed in Running Sample Projects on page 6.For complete details on developing an application for the development kit, refer to Zilog Developer Studio II–eZ80Acclaim!® User Manual (UM0144), and eZ80F91 Modular Development Kit User Manual (UM0170).Note:eZ80F91 Modular Development KitInstalling the ZDS II Software and Kit DocumentationFollow the steps below to install ZDS II and eZ80F91 development kit documentation: 1.Insert the ZDS II CD into the CD-ROM drive. DemoShield launches automatically. IfDemoShield does not launch automatically, open the Windows Explorer, browse to your CD-ROM drive, and double-click launch.exe to launch the installer.2.Click the Install Products button from the main installer menu. From the productinstaller list you can choose to install only ZDS II, or ZDS II and associated documen-tation. You can also copy the documentation directly from your CD-ROM drive to your hard disk using Windows Explorer.Zilog recommends registering your new ZDS II software. By registering Note:ZDS II, you have access to free technical support, software components, andother tools that only registered Zilog customers have. To register online, go to/CustomerPortal/.Connecting the Serial Smart Cable to Your ComputerConnect the Serial Smart Cable 9-pin DB9 serial connector to a COM port on your com-puter.Connecting the Serial Smart Cable to the MDS Adapter Board Attach one end of the six-conductor ribbon cable to the Smart Cable 6-pin DBG connec-tor. See Figure 2 on page 5. Attach the free end of the ribbon cable to the connector on the eZ80Acclaim!® MDS adapter board. The connectors are keyed to ensure proper align-ment.Installing the USB Smart CableYou can install the USB Smart Cable for the following operating systems:Windows Vista-32Follow the steps below to install the USB Smart Cable for Windows Vista-32:1.Connect the USB Smart Cable to the host PC. The Found New Hardware dialog boxis displayed.2.Select Locate and install driver software (recommended). The Driver SoftwareInstallation window is displayed, and then the Found New Hardware-USB Smart Cable dialog box is displayed.eZ80F91 Modular Development Kit3.Select I don’t have the disc. Show me other options.4.Select Browse my computer for driver software (advanced).5.Browse to one of the following driver directory:<ZDS II Installation Directory>\device drivers\USB<ZDS II Installation CD>\Device Drivers\USBThe Windows Security dialog box is displayed.6.Select Install this driver software anyway.7.When the software has been installed, click Closed.Windows XPFollow the steps below to install the USB Smart Cable for Windows XP:1.Connect the USB Smart Cable to the host PC. The Found New Hardware Wizardshould activate automatically.2.In the Wizard, select Install from a list or specific location (Advanced); then clickNext.If the Windows Logo testing dialog appears, select Continue Anyway.Note:3.Select Search for the best driver in these locations and Include this location insearch.4.Browse to one of the following driver directory:<ZDS II Installation Directory>\device drivers\USB<ZDS II Installation CD>\Device Drivers\USB5.Click Next to locate the appropriate driver.6.Click Next and then Click Finish to complete the installation.Windows 2000Follow the steps below to install the USB Smart Cable for Windows 2000:1.Connect the USB Smart Cable to the host PC for the first time.The Found New Hardware Wizard should activate automatically.2.In the Wizard, click Next.3.Select Search for a suitable driver for my device (Recommended); then click Next.4.Select Specify a location; then click Next.eZ80F91 Modular Development Kit5.Browse to the driver directory, one of the following:<ZDS II Installation Directory>\device drivers\USB <ZDS II Installation CD>\Device Drivers\USB6.Click OK , and then click Next after the appropriate driver is found.7.Click Finish to complete the installation.Connecting the USB Smart Cable to the eZ80Acclaim!® MDS Adapter BoardAttach one end of the six-conductor ribbon cable (included) to the USB Smart Cable 6-pin DBG connector. See Figure 2 on page 5. Attach the free end of the ribbon cable to the DBG connector on the eZ80Acclaim! MDS adapter board. Ensure that pin 1 on the ribbon cable (indicated by the dark stripe) is aligned with pin 1 on the target connector.Disconnect or turn OFF the power to the eZ80Acclaim! MDS adapterboard, before connecting or disconnecting the USB Smart Cable.Applying Power to the Development BoardAfter installing the USB Smart Cable, connect the power supply to the development board at connector J7, and then to an electrical outlet. The Green 3.3 V DC LED illuminates indicating that power is supplied to the board.Figure 2.Connecting the Six-Conductor Ribbon Cable to the Serial or USB SmartCableCaution:eZ80F91 Modular Development KitRunning Sample ProjectsAfter installing the ZDS II software and setting up the hardware, you can open and test the sample software projects for the eZ80Acclaim!® product line. Sample projects are located in the following ZDS II sample directories:C:\Program Files\Zilog\ZDSII_eZ80Acclaim!_<version>\samples\ <processor type>_<demo_name>where <processor type> represents the eZ80Acclaim! device that powers the target module and <demo_name> represents the type of sample. (The LedDemo samples are for the legacy eZ80Acclaim! Development Kit that preceded the eZ80F91 Modular Develop-ment Kit).Running the Sample Starter ProjectA sample starter program is provided in the ZDS II CD-ROM. It demonstrates how to write proper code for the eZ80F91 modular development kit. The program writes a few character strings either to RS-232 PortP2 on the eZ80Acclaim! MDS adapter board, or to the Simulated Universal Asynchronous Receiver/Transmitter (UART) Output window (when running the Simulator Debug Tool).Once you have created your own application program, use ZDS II to download that code into the eZ80F91 for testing and debugging.The starter project is written, such that, it defaults to the RS-232 port version. Connect port 2 on the eZ80Acclaim!® MDS adapter board to your PC before running the sample program.Follow the steps below to build and run the sample program for viewing in HyperTerminal on your PC:1.Connect the DB9 RS-232 port on the eZ80Acclaim! MDS adapter board to an openserial port on your PC.2.Open HyperTerminal.3.On the File menu, click New Connection.4.In the Name field, enter a name that describes the connection.5.In the Icon box, click the appropriate icon, and then click OK.6.In the Connect To dialog box, choose the COM port you connected to the RS-232port on the eZ80F91 MDS adapter board in the Connect using drop-down box.7.In the Port Settings dialog box, set the following options:eZ80F91 Modular Development Kit•Bits per second: 57600•Data bits: 8•Parity: None•Stop bits: 1•Flow control: None8.Click OK. HyperTerminal connects to your kit.unch ZDS II by navigating Start→Programs→Zilog ZDS II - eZ80Acclaim!<Version>→ZDS II - eZ80Acclaim! <Version>.10.From the File menu in ZDS II, choose Open Project, and navigate to the followingfile path:c:\Program Files\Zilog\ZDSII_eZ80Acclaim!_<Version>\samples\StarterProject11.Select the starter.zdsproj project within the above file path and click Open. Alist of source files appears in the Workspace panel.12.Double-click the file main.c in the Workspace panel to open the file in the ZDS IIeditor window. Refer to the header of main.c for details about the project.13.Open the Build menu and select Set Active Configuration.14.In the Select Configuration dialog box, select Debug.15.Click OK to close the Select Configuration dialog box.16.From the Project menu in ZDS II, select Settings. The Project Settings dialog boxappears. In the Project Settings dialog box, select the Debugger page.17.In the Debugger page, select eZ80F91ModDevKit_RAM in the Target list.18.In the Debugger page, select SerialSmartCable or USBSmartCable from theDebug Tool drop-down menu.19.Click OK to close the Project Settings dialog box.20.If closing prompts you to rebuild the affected files, click Yes. Otherwise, select Buildfrom the menu bar and click Rebuild All.21.To run the application, select Debug → Go. Until the default settings are changed, thefollowing output is viewed in the Hyperterminal window:Zilog Developers Studioi = 5eZ80F91 Modular Development Kitd = 25f = 1.260000eZ80F91 5 25 1.260000Viewing the Starter Project Output via the ZDS II Cycle-Accurate Simulator (Optional)Follow the steps below to view the output of the starter.zdsproj project in the ZDS II cycle-accurate simulator:1.In ZDS II, open the starter.zdsproj project.2.Select Settings from the Project menu in ZDS II. The Project Settings dialog boxappears. In the Project Settings dialog box, select the Debugger page.3.In the Debugger page, select eZ80F91ModDevKit_RAM in the Target window bychecking the box next to the specific Target Name.4.In the Debugger page, select Simulator from the Debug Tool drop-down menu.5.Click OK to close the Project Settings dialog box.6.If closing prompts you to rebuild the affected files, click Yes. Otherwise, select Buildfrom the menu bar and click Rebuild All.7.When the build is complete, explore the Debug toolbar for the various debugger fea-tures. To connect to the simulator, select Debug→Reset.8.Open the Simulated UART Output window to view the output of the program.Select View→Debug Windows →Simulated UART Output.9.To run the application, select Debug→Go.10.Until the default settings are changed, the following output is viewed in the SimulatedUART Output window:Zilog Developers Studioi = 5d = 25f = 1.260000eZ80F91 5 25 1.260000ing the cycle-accurate simulator, you can view the sample code to study how itworks.You can obtain a sample Zilog ZTP web application and an embedded security Note:SSL application by following the instructions on your kit registration card.eZ80F91 Modular Development KitRelated DocumentationFor complete details on developing an application for the modular development kit, refer to the following documents:•Zilog Developer Studio II–eZ80Acclaim!® User Manual (UM0144)•eZ80F91 Modular Development Kit User Manual (UM0170)•Zilog TCP/IP Software Suite Quick Start Guide (QS0049)•ZTP Network Security Plug-In (SSL) Quick Start Guide (QS0059)•eZ80F91 MCU Product Specification (PS0192)eZ80F91 Modular Development KitDO NOT USE IN LIFE SUPPORTLIFE SUPPORT POLICYZILOG'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF ZILOG CORPORATION.As used hereinLife support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness.Document Disclaimer©2010 by Zilog, Inc. All rights reserved. Information in this publication concerning the devices, applications, or technology described is intended to suggest possible uses and may be superseded. ZILOG, INC. DOES NOT ASSUME LIABILITY FOR OR PROVIDE A REPRESENTATION OF ACCURACY OF THE INFORMATION,DEVICES, OR TECHNOLOGY DESCRIBED IN THIS DOCUMENT. ZILOG ALSO D O E S N O T A S S U M E L I A B I L I T Y F O R I N T E L L E C T U A L P R O P E RT Y INFRINGEMENT RELATED IN ANY MANNER TO USE OF INFORMATION,DEVICES, OR TECHNOLOGY DESCRIBED HEREIN OR OTHERWISE. The information contained within this document has been verified according to the general principles of electrical and mechanical engineering.eZ80Acclaim! is a registered trademark of Zilog, Inc. All other product or service names are the property of their respective owners.Warning:。
Mellanox ConnectX-2 Dual Port 10 GbE Adapter for I
Mellanox ConnectX-2 Dual Port 10 GbE Adapter for IBM System xProduct Guide (withdrawn product)The Mellanox ConnectX-2 Dual Port 10 GbE Adapter for IBM System x delivers high-bandwidth and industry leading low latency 10 GbE connectivity. With industry-leading performance, power-efficiency, integration and feature set, ConnectX-2 EN with RDMAoE (RDMA over Ethernet) adapters provide an optimized, low-latency solution for high-transaction databases, financial services, cloud computing, and virtualized server and storage data center environments. The ConnectX-2 Dual-Port 10 GbE Adapter improves network performance by increasing available bandwidth to the CPU and providing enhanced performance especially in virtualized server environments.The adapter is shown in Figure 1.Figure 1. Mellanox ConnectX-2 Dual Port 10 GbE Adapter for IBM System xDid you know?Click here to check for updatesDid you know?The Mellanox ConnectX-2 Dual Port 10GbE Adapter for IBM System x is a a high-performance, dual-port network adapter for 10Gb/s Ethernet (10GbE) networks with performance requirements for low latency. It provides an ideal solution for all servers needing high- performance, low-latency data transfer in LAN connectivity for mission-critical applications. This network adapter provides support for 10GbE networking with optical or copper connectivity.Part number informationThe part number to order this card is shown in Table 1.Table 1. Ordering part number and feature codeDescription Part number Feature code Mellanox ConnectX-2 Dual Port 10 GbE Adapter for IBM System x81Y9990A1M4The adapter has two empty SFP+ cages that support either SFP+ SR transceivers or twin-ax direct-attached copper (DAC) cables as listed in Table 2.Table 2. Supported transceivers and direct-attach copper (DAC) cablesDescription Part number Feature code Optical TransceiversQLogic 10Gb SFP+ SR Optical Transceiver49Y42180064Brocade 10Gb SFP+ SR Optical Transceiver49Y42160069IBM SFP+ SR Transceiver46C34475053Active Direct-attach copper (DAC) cables1m IBM Active DAC SFP+ Cable95Y0323A25A3m IBM Active DAC SFP+ Cable95Y0326A25B5m IBM Active DAC SFP+ Cable95Y0329A25CPassive Direct-attach copper (DAC) cables0.5m IBM Passive DAC SFP+ Cable00D6288A3RG1m IBM Passive DAC SFP+ Cable90Y9427A1PH3m IBM Passive DAC SFP+ Cable90Y9430A1PJ5m IBM Passive DAC SFP+ Cable90Y9433A1PK7m IBM Passive DAC SFP+ Cable00D6151A3RH Features and benefitsSupported serversThe adapter is supported in the IBM System x servers listed in Table 3.Table 3. Supported System x servers (Part 1)Mellanox ConnectX-2 Dual Port 10 GbE AdapterN N N N N N N N Y N N N Y N NTable 3. Supported System x servers (Part 2)Mellanox ConnectX-2 Dual Port 10 GbE AdapterY Y Y N N N Y N Y N Y N N Y YSupported operating systemsTrademarksLenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web athttps:///us/en/legal/copytrade/.The following terms are trademarks of Lenovo in the United States, other countries, or both:Lenovo®Intelligent ClusterServerProven®System x®The following terms are trademarks of other companies:Linux® is the trademark of Linus Torvalds in the U.S. and other countries.Microsoft®, Windows Server®, and Windows® are trademarks of Microsoft Corporation in the United States, other countries, or both.Other company, product, or service names may be trademarks or service marks of others.Mellanox ConnectX-2 Dual Port 10 GbE Adapter for IBM System x (withdrawn product)11。
千兆光猫用户手册说明书
The CODA-5519is a powerful router that will be used as the heart of your wireless home.It will offer strong Wi-Fi that will covers most houses.The CODA-5519has the capability to receive 5Gbps bi-directional based on 2OFDM +32QAM downstream channels and with 2OFDMA +8upstream channels over its DOCSIS 3.1interface.The integrated Wi-Fi 4x42.4GHz 802.11ax and 4x45GHz 802.11ax dual band MU-MIMO Access Point significantly improves customer experience extending range and coverage with blazing speeds.For wired clients,2.5G plus two Gigabit Ethernet ports offer ultra-fast connection.It can be paired with Hitron extenders/mesh pods for extra coverage.•DOCSIS 3.1 2x2 multi-carrier OFDM •DOCSIS 3.0 32x8 channel bonding•4x4 2.4GHz 802.11ax and 4x4 5GHz 802.11ax dual band concurrent MU-MIMO internal antennas •16 SSIDs (8SSIDs per radio)•Individual configuration for each SSID (security, bridging, routing, firewall and Wi-Fi parameters)•Extensive operator control via configuration file and SNMP•Integrated DLNA Media Server with support for video, audio and image servingDOCSIS 3.1 Wi-Fi 6 and eMTA GatewayIntel® Puma™ 7 OFDM 2x2 w / fixed upstream, 4x4 dual band Wi-Fi w/ concurrent 802.11ax 2.4Ghz + 5GHz, MoCA 2.0 channel bonding and voice HIGH PERFORMANCE INTERNET AND WIRELESS ACCESSThe CODA-5519supports pre-configured and pre-enabled Wi-Fi security via Wi-Fi Protected Setup (WPS),allowing the end-user to rapidly set up a secure wireless network without manual configuration.Hitron's AutoSync software provides secure automated setup of extenders in the customer's home or business.It comes with MyHitron (end user management mobile application).MSO can also get extra management and analytics via HitronCloud/OptiMy CSR interface from the support center.SECURE WIRELESS NETWORKING CONTROLLED AT THE TIP OF YOUR FINGERSKEY FEATURES•IPv6 routing•MoCA 2.0 channel bonding•TR-069 and HNAP for easy setup and remote management•Enhanced management and stability for low total cost of ownership•One 2.5G and Two 1G Ethernet ports •Hitron Ecosystem Support (OptiMy, HitronCloud, MyHitron)•2 HD voice ports with SIP or MGCP supportTVStreamer Smartphone TabletThermostatHome Security LaptopCODA-5519Printer PCMoCA ExtenderPhonesWi-Fi1G Ethernet Analog2.5G Ethernet Coax PodLaptop Gaming ConsoleConnectivity•RF F-Type 75Ωfemale connector•2x RJ-45 Ethernet port 10/100/1000Mbps•1x RJ-45 Ethernet port 10/100/1000/2500Mbps•USB 3.0 type A connector with host interface•2x RJ-11 HD voice ports•EBBU jackManagement•Protocol support: TR-069, TFTP, SSHv2, SNMP v2C, v3•Web-based GUI control, configuration and management •Power-on self diagnostic•Hitron proprietary MIBs for extended support onDOCSIS, router management, Wi-Fi managementand MoCA management•app support•and back end supportReception-Demodulation•DOCSIS 3.1/3.0/2.0•DOCSIS 3.1 demodulation: Multi-carrier OFDM 16 to 4096QAM •DOCSIS 3.1 data rate: Up to 5Gps with 2 OFDM 192MHz downstream channels +32 QAM•DOCSIS 3.0 demodulation: 64QAM, 256QAM•DOCSIS 3.0 data rate: Up to 1.2Gbps with 32 bonded downstream channels•Frequency (edge-to-edge): 108-1218MHz and 258-1218 •Channel Bandwidth: 6MHz•Signal level: -15dBmV to 15dBmVTransmitter-Modulation•DOCSIS 3.1/3.0/2.0•DOCSIS 3.1 modulation: Multi-carrier OFDMA BPSK to 4096QAM •DOCSIS 3.1 data rate: Up to 700Mbps with OFDMA 96MHz upstream channels•DOCSIS 3.0 modulation: QPSK, 8QAM, 16QAM, 32QAM, 64QAM, and 128QAM (SCDMA only)•DOCSIS 3.0 data rate: Up to 320Mbps with 8 bonded upstream channels•Frequency: Fixed 5-85MHz•Upstream transmit signal level: +11 to 65dBmVMoCA 2.0 Reception / Transmitter-Modulation •Demodulation/ Modulation: BPSK, QPSK, 8QAM, 16QAM,32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 1024QAM •PHY data rate: 700Mbps (baseline Mode) / 1400Mbps (bonding channel)•Throughput: 400+Mbps (baseline mode) / 500+Mbps (turbo mode, point to point) / 800Mbps (bonding channel)•Frequency (center frequencies): 1400-1625MHz•Channel bandwidth: 100MHz (baseline mode) / 225MHz (bonding channel)Voice•Protocol support: SIP or MGCP•2x 8kHz each HD voice•Audio codecs: G.711 (a-law and mu-law), G.722 (HD codec), G.723.1, G.726, G.728, and G.729Routing Support•Protocol support: IGMP v3 for IPTV service capability•MAC address filtering (IPv4/IPv6)•IP source/destination address filtering (IPv4/IPv6)•DHCP, TFTP and ToD clients (IPv4/IPv6)•DHCP server supports RFC 1541 (IPv4)•DHCPv6 obtains prefix from DHCPv6 server through prefix delegation•Firewall with stateful inspection (IPv4/IPv6)•Hacker intrusion prevention and detection•Application content filtering (IPv4/IPv6)•Complete NAT software implemented as per RFC 1631 with port and address mapping (IPv4)•DSLite support for IPv4 in-home support with IPv6 MSO backbone •6RD support for quick IPv6 deployment over IPv4 backbone •RIPv2 for static IP supportWireless•802.11a/b/g/n/ac/ax•4T4R 2.4GHz 11ax and 4T4R 5GHz 11ax dual band concurrent MU-MIMO with 1Gbps+4.8Gbps PHY rate•20/40/80/160MHz channel bandwidth•Up to 8 SSIDs for each frequency•Security: WPA-PSK/WPA2-PSK (TKIP/AES), WPA3, WAPI •QoS: WMM/WMM-PS•WPS (Wi-Fi Protected Setup) PBC, PIN•Airtime Fairness (ATF), Band Steering (BS)•Dynamic Frequency Selection (DFS)•Wi-Fi output power range: Max permitted by FCC/IC Electrical•Input power: 12VDC, 4A•Power adaptor: 100-240VAC, 50/60Hz•Power consumption: 4.92 (power saving), 22W (typ.), 38W (Max)•Support power outage for 24 hours on Hitron external battery •Surge protection: RF input sustains at least 4KVEthernet RJ-45 sustains at least 4KV Mechanical•Factory default reset button•WPS button•Dimensions: 74.3mm (W) x 251.5mm (H) x 230.8mm (D)•Weight: Weight: 1850 ±10gEnvironmental•Operating temperature: 0°C (32°F) ~ 40°C (104°F)•Operating humidity: 10% ~ 90% (Non-condensing)•Storage temperature: -40°C (-40°F) ~ 60°C (140°F) Compliance Certificates•RoHS compliant•FCC, IC, ULSPECIFICATIONS。
10base标准
10base标准
10base标准主要定义了网络传输介质，特别是10Mbit/s的以太网使用的介质。
这种标准通常使用同轴电缆或双绞线作为传输介质。
双绞线是最常用的网线类型，一般为4组双绞线，即台式电脑网线插口上使用的8pin传输线。
此外，10BASE-5和10BASE-2是10base标准下的两种重要变体，分别是第一个商用变体和当前实际应用的标准。
其中，10BASE-5也被称为Thick Ethernet或Thicknet，使用直径10mm的50欧姆粗同轴电缆（Coaxial Cable），总线拓扑结构，站点网卡的接口为DB-15连接器，每个网段允许有100个站点，每个网段最大允许距离为500m，网络直径为2500m，可由5个500m长的网段和4个中继器组成；利用基带的10M传输速率，采用曼彻斯特编码传输数据。
而10BASE-2也被称为Cheatnet，其最大段长度接近200米（实际最大长度为185米）。
如需更多信息，建议咨询计算机领域专业人士或查阅相关书籍文献。
莫贾V2416A系列迷你型无风扇、振动防护计算机产品介绍说明书
V2416A SeriesCompact,fanless,vibration-proof computers for rolling stock applicationsFeatures and Benefits•Intel Celeron/Core i7processor•Two hot-swappable2.5-inch HDD or SSD storage expansion trays•Dual independent DVI-I displays•2Gigabit Ethernet ports with M12X-coded connectors•2CFast sockets for OS backup•M12A-coded power connector•Compliant with EN50121-4•Complies with all EN50155mandatory test items1•IEC61373certified for shock and vibration resistance•Ready-to-run Debian7,Windows Embedded Standard7,and Windows10Embedded IoT Enterprise2016LTSB platforms•-40to70°C wide-temperature models available•Supports SNMP-based system configuration,control,and monitoring(Windows only)CertificationsIntroductionThe V2416A Series embedded computers are based on the Intel3rd Gen processor and feature4RS-232/422/485serial ports,dual LAN ports,and 3USB2.0hosts.In addition,the V2416A computers provide dual DVI-I outputs and comply with the mandatory test items of the EN50155 standard,making them suitable for a variety of industrial applications.The CFast socket,SATA connectors,and USB sockets provide the V2416A computers with the reliability needed for industrial applications that require data buffering and storage expansion.Most importantly,the V2416A computers come with2hot-swappable storage trays for inserting additional storage media,such as hard disk or solid-state drives,and support hot swapping for convenient,fast,and easy storage replacement. Each storage tray has its own LED to indicate whether or not a storage module is plugged in.The V2416A Series computers come preinstalled with a choice of Linux Debian7or Windows Embedded Standard7to provide programmers with a familiar environment in which to develop sophisticated,bug-free application software at a low cost.1.This product is suitable for rolling stock railway applications,as defined by the EN50155standard.For a more detailed statement,click here:/doc/specs/EN_50155_Compliance.pdfAppearanceFront View Rear ViewSpecificationsComputerCPU V2416A-C2Series:Intel®Celeron®Processor1047UE(2M cache,1.40GHz)V2416A-C7Series:Intel®Core™i7-3517UE Processor(4M cache,up to2.80GHz) System Chipset Mobile Intel®HM65Express ChipsetGraphics Controller Intel®HD Graphics4000(integrated)System Memory Pre-installed4GB DDR3System Memory Slot SODIMM DDR3/DDR3L slot x1Supported OS Linux Debian7Windows Embedded Standard7(WS7E)32-bitWindows Embedded Standard7(WS7E)64-bitStorage Slot CFast slot x2Computer InterfaceEthernet Ports Auto-sensing10/100/1000Mbps ports(M12X-coded)x2Serial Ports RS-232/422/485ports x4,software selectable(DB9male)USB2.0USB2.0hosts x1,M12D-coded connectorUSB2.0hosts x2,type-A connectorsAudio Input/Output Line in x1,Line out x1,M12D-codedDigital Input DIs x6Digital Output DOs x2Video Input DVI-I x2,29-pin DVI-D connectors(female)Digital InputsIsolation3k VDCConnector Screw-fastened Euroblock terminalDry Contact On:short to GNDOff:openI/O Mode DISensor Type Dry contactWet Contact(NPN or PNP)Wet Contact(DI to COM)On:10to30VDCOff:0to3VDCDigital OutputsConnector Screw-fastened Euroblock terminalCurrent Rating200mA per channelI/O Type SinkVoltage24to40VDCLED IndicatorsSystem Power x1Storage x1Hot-swappable2LAN2per port(10/100/1000Mbps)Serial2per port(Tx,Rx)Serial InterfaceBaudrate50bps to921.6kbpsFlow Control RTS/CTS,XON/XOFF,ADDC®(automatic data direction control)for RS-485,RTSToggle(RS-232only)Isolation N/AParity None,Even,Odd,Space,MarkData Bits5,6,7,8Stop Bits1,1.5,2Serial SignalsRS-232TxD,RxD,RTS,CTS,DTR,DSR,DCD,GNDRS-422Tx+,Tx-,Rx+,Rx-,GNDRS-485-2w Data+,Data-,GNDRS-485-4w Tx+,Tx-,Rx+,Rx-,GNDPower ParametersInput Voltage12to48VDCPower Connector M12A-coded male connectorPower Consumption(Max.) 3.3A@12VDC0.82A@48VDCPower Consumption40W(max.)Physical CharacteristicsHousing AluminumIP Rating IP30Dimensions(with ears)250x86x154mm(9.84x3.38x6.06in)Dimensions(without ears)275x92x154mm(10.83x3.62x6.06in)Weight4,000g(8.98lb)Installation DIN-rail mounting(optional),Wall mounting(standard) Protection-CT models:PCB conformal coating Environmental LimitsOperating Temperature Standard Models:-25to55°C(-13to131°F)Wide Temp.Models:-40to70°C(-40to158°F) Storage Temperature(package included)-40to85°C(-40to185°F)Ambient Relative Humidity5to95%(non-condensing)Standards and CertificationsEMC EN55032/24EMI CISPR32,FCC Part15B Class AEMS IEC61000-4-2ESD:Contact:6kV;Air:8kVIEC61000-4-3RS:80MHz to1GHz:20V/mIEC61000-4-4EFT:Power:2kV;Signal:2kVIEC61000-4-5Surge:Power:2kVIEC61000-4-6CS:10VIEC61000-4-8PFMFRailway EN50121-4,IEC60571Railway Fire Protection EN45545-2Safety EN60950-1,IEC60950-1Shock IEC60068-2-27,IEC61373,EN50155Vibration IEC60068-2-64,IEC61373,EN50155DeclarationGreen Product RoHS,CRoHS,WEEEMTBFTime332,173hrsStandards Telcordia(Bellcore),GBWarrantyWarranty Period3yearsDetails See /warrantyPackage ContentsDevice1x V2416A Series computerInstallation Kit8x screw,for storage installation2x storage key1x wall-mounting kit8x washer,for HDD/SSDDocumentation1x document and software CD1x quick installation guide1x warranty cardDimensionsOrdering InformationModel Name CPU Memory(Default)OS CFast(CTO)Backup CFast(CTO)Hot-SwappableSSD/HDD Tray(CTO)Operating Temp.ConformalCoatingV2416A-C2Celeron1047UE4GB or optional1(Optional)1(Optional)2(Optional)-25to55°C–V2416A-C2-T Celeron1047UE4GB or optional1(Optional)1(Optional)2(Optional)-40to70°C–V2416A-C2-CT-T Celeron1047UE4GB or optional1(Optional)1(Optional)2(Optional)-40to70°C✓V2416A-C7i7-3517UE4GB or optional1(Optional)1(Optional)2(Optional)-25to55°C–V2416A-C7-T i7-3517UE4GB or optional1(Optional)1(Optional)2(Optional)-40to70°C–V2416A-C7-CT-T i7-3517UE4GB or optional1(Optional)1(Optional)2(Optional)-40to70°C✓V2416A-C2-W7E Celeron1047UE4GB8GB1(Optional)2(Optional)-25to55°C–V2416A-C2-T-W7E Celeron1047UE4GB8GB1(Optional)2(Optional)-40to70°C–V2416A-C7-T-W7E Core i7-3517UE4GB8GB1(Optional)2(Optional)-40to70°C–Accessories(sold separately)Battery KitsRTC Battery Kit Lithium battery with built-in connectorCablesCBL-M12XMM8PRJ45-BK-100-IP67M12-to-RJ45Cat-5E UTP gigabit Ethernet cable,8-pin X-coded male connector,IP67,1mCBL-M12(FF5P)/Open-100IP67A-coded M12-to-5-pin power cable,IP67-rated5-pin female M12connector,1mConnectorsM12A-5PMM-IP685-pin male circular threaded D-coded M12USB connector,IP68M12X-8PMM-IP678-pin male X-coded circular threaded gigabit Ethernet connector,IP67M12A-5P-IP68A-coded screw-in sensor connector,female,IP68,4.05cmM12A-8PMM-IP678-pin male circular threaded A-codes M12connector,IP67-rated(for field-installation)Power AdaptersPWR-24270-DT-S1Power adapter,input voltage90to264VAC,output voltage24V with2.5A DC loadPower CordsPWC-C7AU-2B-183Power cord with Australian(AU)plug,2.5A/250V,1.83mPWC-C7CN-2B-183Power cord with two-prong China(CN)plug,1.83mPWC-C7EU-2B-183Power cord with Continental Europe(EU)plug,2.5A/250V,1.83mPWC-C7UK-2B-183Power cord with United Kingdom(UK)plug,2.5A/250V,1.83mPWC-C7US-2B-183Power cord with United States(US)plug,10A/125V,1.83mAntennasANT-WDB-ANF-0407 2.4/5GHz,omni-directional antenna,4/7dBi,N-type(male)Wall-Mounting KitsV2400Isolated Wall Mount Kit Wall-mounting kit with isolation protection,2wall-mounting brackets,4screwsDIN-Rail Mounting KitsDK-DC50131DIN-rail mounting kit,6screws©Moxa Inc.All rights reserved.Updated Jun12,2019.This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc.Product specifications subject to change without notice.Visit our website for the most up-to-date product information.。
DPtech FW1000系列应用防火墙安装手册v2.01
DPtech FW1000 系列应用防火墙安装手册
2.2.4 抗干扰要求............................................................................................................................... 3 2.2.5 防雷击要求............................................................................................................................... 3 2.2.6 接地要求................................................................................................................................... 3 2.2.7 布线要求................................................................................................................................... 3 2.3 安装工具......................................................................................................................................4
杭州迪普科技有限公司为客户提供全方位的技术支持。 通过杭州迪普科技有限公司代理商购买产品的用户，请直接与销售 代理商联系；直接向杭州迪普科技有限公司购买产品的用户，可直 接与公司联系。
ABB 8140系列、8140.1系列、8140.2系列商品说明书
TERMOSTATOS 8140 / 8140.1 / 8140.2Instrucciones de instalación yfuncionamientoABBLea atentamente las siguientes instrucciones antes de utilizar el producto.ÍNDICE PAG. FUNCIONAMIENTO (3)MONTAJE (4)ESQUEMAS DE CONEXIÓN (5)REGULACION Y AJUSTE (10)PUESTA EN SEVICIO (14)DATOS TÉCNICOS (15)GARANTIA (16)Esta gama de termostatos sirve para la regulación de la temperatura en recintos cerrados y secos como pueden ser viviendas, locales públicos, etc.EMPLAZAMIENTO ADECUADOPara un óptimo funcionamiento deben situarse en una pared o tabique según los siguientes puntos:- Situación en una pared enfrente de la fuente de climatización a 1,5 m. sobre el nivel del suelo.- Debe evitarse el montaje en muros exteriores y en lugares expuestos a corrientes de aire.- Debe asegurarse que el aire normal de convención alcance el termostato sin dificultades. Para ello nodebe montarse el aparato en estanterías o detrás de cortinas o recubrimientos similares.- Debe evitarse la incidencia directa de rayos solares, la proximidad de televisores, lámparas, chimeneas, tuberías de calefacción y en general cualquierelemento que genere calor.Para proceder al montaje del aparato debe actuarse conforme a los siguientes pasos:1.Efectuar las conexiones eléctricas conforme se ex-plica en el apartado “Esquemas de conexión”.2.Sujetar el aparato sobre la caja de empotrar uni-versal.3.Montar la tapa utilizando el tornillo que oculta elbotón, de manera que la tapa sujete el marco.4.Poner el botón de selección de temperatura, ha-ciendo coincidir el nervio del eje en la ranura del alojamiento.Observaciones: Una vez montado el aparato reco-mendamos proteger el mismo con la tapa hasta su puesta definitiva en funcionamiento.NOTA: Asegúrese de desconectar la tensión de la instalación cuando manipule el aparato.La conexión eléctrica del aparato debe realizarse conforme se muestra en el esquema eléctrico de las figuras siguientes.Es preciso asegurar que el hilo del Neutro se conecte en la borna «N». Si esto no ocurriera el Termostato no trabajaría correctamente.La sección máxima de los conductores es de 2,5 mm2. No se precisa la conexión del conductor de puesta a tierra ya que el aparato cuenta con aislamiento de protección.TERMOSTATO CALEFACCIÓN(Ref. 8140)L N LN CAL.Fig. 1(OPCIONAL)TERMOSTATO CALEFACCIÓN CON INTERRUPTOR(Ref. 8140.1)L N LN CAL.Fig. 2(OPCIONAL)TERMOSTATO FRÍO-CALOR PARA INSTALACIÓNCON UN SOLO FLUIDO PORTADOR DE CALOR(Ref. 8140.2)L N LNCAL.Fig. 3REF.TERMOSTATO FRÍO-CALORCON CAMBIO CENTRALIZADO(Ref. 8140.2)L N LNVÁLVULAFig. 4Todos los Termostatos salen de fábrica con el margen de ajuste comprendido entre + 5 ºC y 30 ºC.Este margen de temperatura puede variarse a voluntad, actuando sobre los dos tornillos de ajuste existentes en la parte interna del botón selector de temperatura.El procedimiento para fijar un margen diferente al mencionado es el siguiente:1.Elegir los límites de temperatura que se deseen.Ejemplo: Mínimo 10 ºC. Máximo 22 ºC.2.Situar el botón selector de temperaturaaproximadamente en el medio del margen deseado.Siguiendo el ejemplo anterior el medio entre 10 ºC y22 ºC es 16 ºC.3.Sacar de su alojamiento el botón de ajuste.104.Situar el anillo rojo existente en la parte inferior delbotón, a la temperatura máxima deseada: en este caso 22 ºC.El movimiento de este anillo selector debe realizarse en el sentido contrario, al de las agujas de un reloj.Para realizar esta operación debe tomarse en cuenta las cifras de la escala situadas en la parte exterior de la misma. Ver figura 5.5.Ajustar ahora el anillo de ajuste de color azul a latemperatura mÍnima deseada, en este caso 10 ºC.Para el ajuste de este anillo debe moverse el mismo en sentido de las agujas del reloj y tomarse en cuenta las cifras de la escala interior. Ver figura 6. 6.Volver a colocar el botón del selector en el aparato.Al hacer esto el indicador del botón debe marcar de nuevo la temperatura media del punto 2.11FIG. 5BÓTON TERMOSTATOFIG. 6BÓTON TERMOSTATO1Al poner en servicio el Termostato hay que tener en cuenta que el bimetal térmico precisa de algún tiempo para adaptarse a la temperatura ambiente. Inmediatamente después de la puesta en servicio, el punto de conmutación será diferente a la temperatura ambiente; como el aparato está equipado con un sistema de realimentación térmica, la temperatura a la que se ha ajustado tardará un cierto tiempo en alcanzarse. Para poder alcanzar más rápidamente el calentamiento inicial y acortar el tiempo de adaptación se recomienda situar la temperatura de ajuste algo más alta de lo que se desee. Una vez se haya alcanzado la temperatura deseada, puede volverse a efectuar un reajuste de la temperatura situando los puntos máximos y mínimos deseados.Margen de temperatura: +5° a 30° CTensión nominal: 250 V~ 50 HzDiferencial temp. conmutación:Dinámico 1 K ±0,5 KEstático aprox. 2,5 KCargas máx.:En calefacción: 10(4) AEn refrigeración: 5 (2) ACargas mín.:En calefacción: 10 mAEn refrigeración: 10 mATemperatura de funcionamiento: 0° a 55°Grado de protección: IP20Margen de actuación: Regulable de 5° a 30° CTodos los aparatos fabricados o distribuidos por Asea Brown Boveri, S.A. Fábrica NIESSEN están realiza-dos de acuerdo a la más moderna tecnología. La Fá-brica NIESSEN, garantiza sus artículos, dentro de las condiciones generales de suministro, siempre que se trate de un defecto de fabricación. En este caso, le rogamos remita el aparato defectuoso al distribuidor donde lo adquirió, acompañado del presente certifi-cado de garantía.La presente garantía se aplicará a aquellos artículos que presenten un defecto de fabricación. No se aplicará por lo tanto a los artículos que presenten daños como consecuencia de no haber seguido correctamente las instrucciones de montaje, o cuando la instalación haya sido realizada por personal no especializado. Así mismo, quedan excluidos los daños ocasionados por uso indebido del aparato y averías producidas en el transporte.La duración de esta garantía es de 24 meses a partir de la fecha de adquisición del aparato.Importante: Asegúrese de que el presente certificado de garantía esté debidamente cumpli-mentado por el distribuidor.Fecha de adquisición: / /Sello y firma del distribuidor2C L X 81409A 1001 - F Asea Brown Boveri, S.A.Electrification Products Fábrica NIESSEN Polígono Industrial Aranguren, n.º 6 20180 OIARTZUN - España Telf. +34 943 260 101Fax +34 943 260 934e-mail: saic .niessen @ www.abb.es/niessen。
Cisco-NAV10-WF功能说明
满足基本需求1，企业内部组网
• Navigator提供多达9个的100/1000M以太网端口，可 直接为PC提供以太接口，或每个接口延伸出一个经济 型HUB，为分支机构提供5-150台PC的接入。
• Navigator的100/1000M网口，可以直接与Server的千 兆端口连接。
• 具备无线AP功能，直接提供分支机构办公室内的安全 的WLAN业务，有效覆盖200平方米的分支机构空间。
Navigator的主要业务特点
双连上网 可靠！
“领航者” 独特配备的双千兆上连 接端口，让用户可以使用两条宽带上 网线路同时使用或互为备份，使上网 更快、更可靠
Internet
办公组网 高效！
“领航者”配备最多至9个高速局 域网端口，和符合802.11b/g标准 的无线接入功能，使办公组网简单 、高效。高速网络打印、高精度数 码图片共享、实时协同工作等应用 从此畅通无阻。
马、蠕 虫等病
毒攻击
•防病毒功能，所有经过网关的 流量会被检查和过滤，发现有病 毒特征或其他恶意代码特征的数 据会被清除。
入侵检测 防火墙
中文图 形界面
中文安 全报表
满足增值需求3，关键业务服务质量
• 支持QoS机制，与电信网络配合，确保关键业务，如语 音、全球眼、ERP的优先转发和带宽保证。
用得轻松，用得明白
NAV10
√ √ √ √ √ √
NAV10-WF
√ √ √ √ √ √ √
NAV10ADVSEC
√ √ √ √ √ √
√ √ √ √
NAV10WFADVSEC
√ √ √ √ √ √ √ √ √ √ √
接口形态及特点
双上连GE端口 八个下连GE端口
电脑硬件分析
【详细信息：】-------[ 主板]----------------------------------------------------------------------------------主板型号联想31900060Std芯片组英特尔Ivy Bridge - HM76 Express 芯片组序列号LB01419786主板版本31900060StdBIOS 联想78CN24WW(V2.02) / 制造日期: 2013年09月23日BIOS的大小4608 KB--------[ 处理器]--------------------------------------------------------------------------------处理器英特尔第三代酷睿i5-3230M @ 2.60GHz 双核步进E1速度 2.60 GHz (100 MHz x 26.0)处理器数量核心数: 2 / 线程数: 4核心代号Ivy Bridge生产工艺22 纳米插槽/插座Socket H2 (LGA 1155)一级数据缓存 2 x 32 KB, 8-Way, 64 byte lines一级代码缓存 2 x 32 KB, 8-Way, 64 byte lines二级缓存 2 x 256 KB, 8-Way, 64 byte lines三级缓存 3 MB, 12-Way, 64 byte lines特征MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, HTT, EM64T, EIST, Turbo Boost --------[ 硬盘]----------------------------------------------------------------------------------产品希捷ST500LT012-9WS142大小500 GB转速5400 转/分缓存16 MB硬盘已使用共953 次，累计1515 小时固件0001LVM1接口SATA II数据传输率300 MB/秒特征S.M.A.R.T, APM, 48-bit LBA, NCQ--------[ 内存]----------------------------------------------------------------------------------DIMM1 海力士DDR3L 1600MHz 4GB制造日期2013 年11月型号AD HMT351S6EFR8A-PB序列号00A09E61厂商Hynix模块位宽: 64 Bits模块电压: SSTL 1.35V--------[ 显卡]----------------------------------------------------------------------------------主显卡英特尔HD Graphics 4000显存 2 GB制造商联想制造商Intel驱动版本10.18.10.4276驱动日期2015年08月17日显卡ATI Radeon HD 8570M显存 2 GB制造商联想制造商ATI驱动版本15.201.1151.0驱动日期2015年08月21日--------[ 显示器]--------------------------------------------------------------------------------产品LG LGD033C厂商LG固件日期2011 年屏幕尺寸14 英寸(31 厘米x 17 厘米)显示比例宽屏16 : 9分辨率1366 x 768 32 位真彩色Gamma 2.20最大分辨率1366 x 768--------[ 其他设备]------------------------------------------------------------------------------产品松下DVD-RAM UJ8E1 DVD刻录机缓存/固件: 768 KB /8.71(2000-00-00)网卡鈺硕QCA8172 Fast Ethernet制造商联想无线网卡博通BCM43142 802.11b/g/n制造商联想声卡Conexant SmartAudio HD @ 英特尔Panther Point High Definition Audio Controller 键盘PS/2 标准键盘鼠标HID-compliant 鼠标鼠标联想指点杆摄像头联想EasyCamera--------[ PCI设备]-------------------------------------------------------------------------------设备Ivy Bridge DRAM Controller设备ID 0154制造商Intel制造商ID 8086类别Bridge / PCI to HOST子系统制造商Lenovo子系统ID 397717AA设备Ivy Bridge PCI Express Root Port设备ID 0151制造商Intel制造商ID 8086类别Bridge / PCI to PCI设备HD Graphics 4000设备ID 0166制造商Intel制造商ID 8086类别Display / VGA子系统制造商Lenovo子系统ID 380017AA设备Panther Point USB xHCI Host Controller设备ID 1E31制造商Intel制造商ID 8086类别Serial / USB (UHCI)子系统制造商Lenovo子系统ID 397717AA设备Panther Point MEI Controller #1设备ID 1E3A制造商Intel制造商ID 8086类别Simple Communication / Other子系统制造商Lenovo子系统ID 397717AA设备Panther Point USB Enhanced Host Controller #2 设备ID 1E2D制造商Intel制造商ID 8086类别Serial / USB 2.0 (EHCI)子系统制造商Lenovo子系统ID 397717AA设备Panther Point High Definition Audio Controller 设备ID 1E20制造商Intel制造商ID 8086类别Multimedia / Hi-definition Audio子系统制造商Lenovo子系统ID 397717AA设备Panther Point PCI Express Root Port 1设备ID 1E10制造商Intel制造商ID 8086类别Bridge / PCI to PCI设备Panther Point PCI Express Root Port 2设备ID 1E12制造商Intel制造商ID 8086类别Bridge / PCI to PCI设备Panther Point USB Enhanced Host Controller #1 设备ID 1E26制造商Intel制造商ID 8086类别Serial / USB 2.0 (EHCI)子系统制造商Lenovo子系统ID 397717AA设备HM76 Express Chipset LPC Controller设备ID 1E59制造商Intel制造商ID 8086类别Bridge / PCI to ISA子系统制造商Lenovo子系统ID 397717AA设备Panther Point 6 port SATA Controller设备ID 1E03制造商Intel制造商ID 8086类别Storage / Serial ATA (AHCI 1.0)子系统制造商Lenovo子系统ID 397717AA设备Panther Point SMBus Controller设备ID 1E22制造商Intel制造商ID 8086类别Serial / SMBus Controller子系统制造商Lenovo子系统ID 397717AA设备Panther Point Thermal Management Controller设备ID 1E24制造商Intel制造商ID 8086类别Data Aquisition& Signal Processing / Other子系统制造商Lenovo子系统ID 397717AA设备Radeon HD 8570M (SUN PRO)设备ID 6663制造商ATI制造商ID 1002类别Display / Other子系统制造商Lenovo子系统ID 380017AA设备QCA8172 Fast Ethernet设备ID 10A0制造商Attansic制造商ID 1969类别Network / Ethernet子系统制造商Lenovo子系统ID 380217AA设备BCM43142 802.11b/g/n设备ID 4365制造商Broadcom制造商ID 14E4类别Network / Other子系统制造商Lenovo子系统ID 061117AA--------[ USB设备]-------------------------------------------------------------------------------制造商ID 105B产品ID E065类别255 / 1 / 1设备版本USB 2.0制造商ID 1C4F产品ID 0034类别0 / 0 / 0设备SIGMACHIP Usb MouseSerial ?版本USB 1.1制造商ID 0BDA产品ID 0129类别255 / 255 / 255设备Generic USB2.0-CRWSerial 20100201396000000版本USB 2.0制造商ID 174F产品ID 148D类别239 / 2 / 1设备版本USB 2.0--------[ 电源设备]-------------------------------------------------------------------------------产品联想PABAS0241231 - 41167 锂电池电池损耗 6.27%出厂设计容量42770 mWh完全充电容量40090 mWhID 41167LENOVO PABAS0241231Cmos设置一、进入CMOS设置界面开启计算机或重新启动计算机后，在屏幕显示“Waiting……”时，按下“Del”键就可以进入CMOS的设置界面。
Lenovo Flex System EN2092 1Gb Ethernet Scalable Sw
Lenovo Flex System EN2092 1Gb Ethernet Scalable SwitchProduct Guide (withdrawn product)The Lenovo® Flex System™ EN2092 1Gb Ethernet Scalable Switch enables administrators to offer full Layer 2 and 3 switching and routing capability with combined 1 Gb and 10 Gb external ports in a Flex System chassis. Such consolidation simplifies the data center infrastructure and helps reduce the number of discrete devices, management consoles, and management systems while leveraging the 1 Gb Ethernet infrastructure. In addition, the next-generation switch module hardware supports IPv6 Layer 3 frame forwarding protocols. This Scalable Switch delivers cost savings with flexible port mapping and Features on Demand upgrades, efficient traffic management, increased external bandwidth, and strong Ethernet switching price/performance.The following figure shows the switch module.Figure 1. Lenovo Flex System EN2092 1Gb Ethernet Scalable SwitchDid you know?The base switch configuration comes standard with 24x 1 GbE port licenses that can be assigned to internal or external 1 GbE connections or even external SFP+ ports with flexible port mapping. For example, this feature allows customers to trade off one external 1 GbE RJ-45 port for one internal 1 GbE port (or vice versa) or trade off ten 1 GbE ports for one 10 GbE port. Customers then have the flexibility of turning on more ports when you need them using Lenovo's Features on Demand upgrade licensing capabilities that provide “pay as you grow” scalability without the need to buy additional hardware. Delivering advanced virtualization awareness and cloud readiness helps simplify management and automates VM mobility by making the network VM aware with VMready® which works with all the major hypervisors.Click here to check for updatesFigure 2. Front panel of the Flex System EN2092 1Gb Ethernet Scalable SwitchThe front panel contains the following components:20x 1000BASE-T Ethernet external ports for 10/100/1000 Mbps connections to external Ethernet devices.4x SFP+ external ports to attach SFP/SFP+ transceivers for 1 Gb or 10 Gb connections or DAC cables for 10 Gb Ethernet connections.One mini-USB RS-232 console port that provides an additional means to configure the switchFigure 3. Location of the I/O bays in the Flex System chassisThe EN2092 switch can be installed in bays 1, 2, 3, and 4 of the Flex System chassis. A supported adapter card must be installed in a corresponding slot of the compute node. Each adapter can use up to four lanes to connect to the respective I/O module bay. The EN2092 is able to use up to two of the four lanes.In compute nodes that have an integrated dual-port 10 GbE network interface controller (NIC), NIC's ports are routed to bays 1 and 2 with a specialized periscope connector, and the adapter card is not required. However, when needed, the periscope connector can be replaced with the adapter card. In such a case integrated NIC will be disabled.Prior to Networking OS 7.8, with 4-port or 8-port adapters, an optional Upgrade 1 (90Y3562) was required for the switch to allow communications on four ports. With Networking OS 7.8 or later, there is no need to buy additional switch upgrades for 4-port adapters if the total number of port licenses on the switch does not exceed the number of external (upstream network ports) and internal (compute node network ports) connections used.The midplane connections between the adapters that are installed in the compute nodes to the I/O module bays in the chassis are listed in the following table. Half-wide compute nodes support up to two adapters, and full-wide compute nodes support up to four adapters.Table 8. Adapter to I/O bay correspondenceI/O adapter slotin the compute node Port on the adapter Corresponding I/O module bay in the chassisBay 1Bay 2Bay 3Bay 4Slot 1Port 1YesPort 2YesPort 3YesPort 4YesSlot 2Port 1YesPort 2YesPort 3YesPort 4YesSlot 3(full-wide compute nodes only)Port 1YesPort 2Yes Port 3YesPort 4YesSlot 4(full-wide compute nodes only)Port 1YesPort 2Yes Port 3YesPort 4YesThe following table lists the I/O adapters that are supported by the EN2092 1Gb Scalable Switch. 10 GbE adapters operate at 1 GbE speeds when used with this switch.Table 9. Network adaptersDescription Part number Feature code10 Gb Ethernet (10 GbE adapters operate at 1 GbE speeds)Embedded 10Gb Virtual Fabric Adapter (2-port)*None NoneFlex System CN4022 2-port 10Gb Converged Adapter#88Y5920A4K3Flex System CN4052 2-port 10Gb Virtual Fabric Adapter00JY800A5RPFlex System CN4052S 2-port 10Gb Virtual Fabric Adapter00AG540ATBTFlex System CN4054 10Gb Virtual Fabric Adapter (4-port)90Y3554A1R1Flex System CN4054R 10Gb Virtual Fabric Adapter (4-port)00Y3306A4K2Flex System CN4054S 4-port 10Gb Virtual Fabric Adapter00AG590ATBSFlex System CN4058S 8-port 10Gb Virtual Fabric Adapter94Y5160A4R61 Gb EthernetEmbedded 1 Gb Ethernet controller (2-port)**None NoneFlex System EN2024 4-port 1Gb Ethernet Adapter49Y7900A10Y* The Embedded 10Gb Virtual Fabric Adapter is built into select compute nodes.# The CN4022 supports 1 Gbps links with firmware 2.4.1D1 and driver nx2-2.2.5f-1.710.11 or later levels. For additional information, refer to https:///support/entry/myportal/docdisplay?lndocid=migr-5094970.** The Embedded 1 Gb Ethernet controller is built into select compute nodes.Network connectivityThe following table lists the network switches that are offered by Lenovo that can be used with theEN2092 in Flex System network connectivity solutions.Table 10. Network switchesDescription Part number 1 Gb Ethernet switchesLenovo RackSwitch G7028 (Rear to Front)7159BAX Lenovo RackSwitch G7052 (Rear to Front)7159CAX Lenovo RackSwitch G8052 (Rear to Front)7159G5210 Gb Ethernet switchesLenovo RackSwitch G8124E (Rear to Front)7159BR6 Lenovo RackSwitch G8264 (Rear to Front)7159G64 Lenovo RackSwitch G8272 (Rear to Front)7159CRW Lenovo RackSwitch G8296 (Rear to Front)7159GR610 Gb Converged switchesLenovo RackSwitch G8264CS (Rear to Front)7159DRX40 Gb Ethernet switchesLenovo RackSwitch G8332 (Rear to Front)7159BRX For more information, see the list of Product Guides in the Top-of-rack Switches category:/servers/options/switchesTrademarksLenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web athttps:///us/en/legal/copytrade/.The following terms are trademarks of Lenovo in the United States, other countries, or both:Lenovo®Flex SystemNMotion®RackSwitchVMready®XClarity®Other company, product, or service names may be trademarks or service marks of others.。
联想 ThinkSystem DB720S Gen7 FC SAN 交换机产品指南说明书
Lenovo ThinkSystem DB720S Gen7 FC SAN Switch Product GuideThe Lenovo ThinkSystem DB720S Gen 7 FC SAN Switch, with its unmatched 64Gbps performance and industry-leading port density, provides a building block that supports data growth, demanding workloads, and data-center consolidation. Delivering unmatched 64Gbps performance and 50% lower latency compared to the previous generation, this switch delivers a fixed-port building block, designed to maximize the performance of flash and NVMe environments to meet demanding workloads. With Brocade® Gen 7 technology, the DB720S delivers far more than just speed and latency improvements. It can eliminate the pain of managing your data center, with autonomous SAN technology to deliver a network that can self-learn, self-optimize, and self-heal without intervention.The Lenovo DB720 is built for maximum flexibility, scalability, and ease of use. Organizations can scale from 24 to 64 SFP+ ports in an efficient 1U form factor that delivers industry-leading port density and space utilization.The following figure shows the Lenovo ThinkSystem DB720S Gen 7 FC SAN Switch.Figure 1. Lenovo ThinkSystem DB720S Gen 7 FC SAN SwitchDid you know?The DB720S is designed for maximum flexibility and value. This enterprise-class switch offers pay-as-you-grow scalability with Ports on Demand (PoD). Organizations can quickly, easily, and cost-effectively scale from 24 ports to 64 ports in an efficient 1U form factor that delivers industry-leading port density and space utilization. This switch also provides easy integration into existing SAN environments -- from 8Gb to 64Gb speeds -- while introducing the benefits of Gen 7 Fibre Channel connectivity. And the DB720S simplifies deployment, configuration, and management of SAN resources with a collection of easy-to-use tools.With Lenovo FC SAN switch offerings, Lenovo can be your trusted partner that offers "one stop shop" and single point of contact for delivery of leading edge technologies and innovations from Lenovo and other leading IT vendors. These offerings can satisfy the wide range of your end-to-end IT infrastructure needs, including end-user devices, servers, storage, networking, services, management software, and financing.Click here to check for updatesComponents and connectorsThe following figure shows the port-side view of the DB720S FC SAN Switch.Figure 2. DB720S FC SAN Switch port-side viewThe following figure shows the non-port side view of the DB720S FC SAN Switch.Figure 3. DB720S FC SAN Switch non-port-side viewSystem specificationsThe following table lists the ThinkSystem DB720S system specifications.Table 1. System specificationsComponent SpecificationMachine type7D5JSystem ArchitectureTable 4. Transceivers and cablesPart number Feature code Description Maximum quantity 64 Gb FC SFP+ Double Density transceivers (require FOS 9.1.0 or later)4M27A65827BPJ5Brocade Secure 64-Gb SWL SFP-DD Transceiver84M27A65828BPJ6Brocade Secure 64-Gb SWL SFP-DD Transceiver 8-pack164 Gb FC SFP+ transceivers (require FOS 9.0.1a or later)4M27A65425BF6J Brocade Secure 64-Gb SWL SFP+ Transceiver564M27A65426BF6K Brocade Secure 64-Gb SWL SFP+ Transceiver 8-pack74M27A65433BQQG Brocade Secure 64Gb LWL SFP+ Transceiver (10 km)564M27A65434BQQH Brocade Secure 64Gb LWL SFP+ Transceiver (10 km) 8-pack74M27A65432BQQF Brocade Secure 64Gb ELWL SFP+ Transceiver (25 km)5632 Gb FC SFP+ transceivers4M27A65416BF69Brocade Secure 32-Gb SWL SFP+ Transceiver564M27A65417BF6A Brocade Secure 32-Gb SWL SFP+ Transceiver 8-pack74M27A65418BF6B Brocade Secure 32-Gb LWL SFP+ Transceiver (10 km)5674M27A65419BF6C Brocade Secure 32-Gb LWL SFP+ Transceiver (10 km) 8-pack4M27A65424BF6D Brocade Secure 32-Gb ELWL SFP+ Transceiver (25 km)56**4M27A65431BQQE Brocade Secure 32Gb ELWL SFP+ V2 Transceiver (25 km)*56**10 Gb FC SFP+ transceivers4M27A65420BF6E Brocade Secure 10Gb FC SWL SFP+ Transceiver564M27A65421BF6F Brocade Secure 10Gb FC LWL SFP+ Transceiver56OM3 optical cables for 32 Gb and 64 Gb FC SW SFP+ transceivers00MN499ASR5Lenovo 0.5m LC-LC OM3 MMF Cable5600MN502ASR6Lenovo 1m LC-LC OM3 MMF Cable5600MN505ASR7Lenovo 3m LC-LC OM3 MMF Cable5600MN508ASR8Lenovo 5m LC-LC OM3 MMF Cable5600MN511ASR9Lenovo 10m LC-LC OM3 MMF Cable5600MN514ASRA Lenovo 15m LC-LC OM3 MMF Cable5600MN517ASRB Lenovo 25m LC-LC OM3 MMF Cable5600MN520ASRC Lenovo 30m LC-LC OM3 MMF Cable56OM4 optical cables for 32 Gb and 64 Gb FC SW SFP+ transceivers4Z57A10845B2P9Lenovo 0.5m LC-LC OM4 MMF Cable564Z57A10846B2PA Lenovo 1m LC-LC OM4 MMF Cable564Z57A10847B2PB Lenovo 3m LC-LC OM4 MMF Cable564Z57A10848B2PC Lenovo 5m LC-LC OM4 MMF Cable564Z57A10849B2PD Lenovo 10m LC-LC OM4 MMF Cable564Z57A10850B2PE Lenovo 15m LC-LC OM4 MMF Cable564Z57A10851B2PF Lenovo 25m LC-LC OM4 MMF Cable564Z57A10852B2PG Lenovo 30m LC-LC OM4 MMF Cable56OM4 SN to LC (SFP-DD to SFP) optical cables for 64 Gb FC SW SFP-DD transceivers4X97A81905BPAF Lenovo 1M SN-LC SFP-DD OM4 FC Cable16With SANnav Global View, administrators can quickly visualize the health, performance, and inventory of multiple SANnav Management Portal instances using a simple, intelligent dashboard and can easily navigate from a global view down to local environments to investigate points of interest. SANnav Global View is designed to manage up to 20 SANnav Management Portal instances.For more information, refer to the SANnav Management Portal documentation:/products/fibre-channel-networking/software/sannav-management-portal#documentationThe following table lists ordering information for the optional SANnav Management Portal and SANnav Global View management tools. After a client has an active SANnav license, Lenovo offers a “license extension/renewal”. This offering provides our clients the flexible to extend their subscription down to a specific end date. This allows clients the ability to align to your company’s budget or align with warranty of your FC SAN switches/directors. Please engage directly with your Lenovo sales representative for more details.Table 6. SANnav Management Portal and SANnav Global View subscription licensesPart number Feature code DescriptionSANnav Management Portal electronic authorization licenses7S0C0010WW S1K6Brocade SANnav Mgmt Portal Base Edition - 1YR License 600 ports7S0C0013WW S1K8Brocade SANnav Mgmt Portal Base Edition - 3YR License 600 ports7S0C001KWW S4MB Brocade SANnav Mgmt Portal Base Edition - 5YR License 600 ports7S0C0011WW S1K7Brocade SANnav Mgmt Portal Enterprise Edition - 1YR License 15K ports7S0C0014WW S1K9Brocade SANnav Mgmt Portal Enterprise Edition - 3YR License 15K ports7S0C001LWW S4MC Brocade SANnav Mgmt Portal Enterprise Edition - 5YR License 15K ports SANnav Global View electronic authorization licenses7S0C0012WW S1D8Brocade SANnav Global View - 1YR License7S0C0015WW S1D9Brocade SANnav Global View - 3YR License7S0C001JWW S4MA Brocade SANnav Global View - 5YR LicenseThe SANnav licenses are subscription-based with 1-year, 3-year, or 5-year software entitlement and support.Fibre Channel standardsThe DB720S FC SAN Switch supports the standards listed at the following web page:https:///support/fibre-channel-networking/san-standards/standards-compliance Power supplies and cablesPower supplies and cablesThe DB720S FC SAN Switch ships with two redundant hot-swap 350 W AC power supplies. Each power supply has an IEC 309-C14 connector.The switch comes standard without a power cord; two rack power cables or line cords must be ordered together with the switch (see the following table).Table 7. Power cord optionsPart number Feature code DescriptionRack power cables39Y79376201 1.5m, 10A/100-250V, C13 to IEC 320-C14 Rack Power CableNone*6568 1.8m, 10A/100-250V, 2xC13PM to IEC 320-C14 Rack Power Cable4L67A083666311 2.8m, 10A/100-250V, C13 to IEC 320-C14 Rack Power Cable39Y79386204 2.8m, 10A/100-250V, C13 to IEC 320-C20 Rack Power Cable39Y79326263 4.3m, 10A/100-250V, C13 to IEC 320-C14 Rack Power CableLine cords39Y7931620710A/125V C13 to NEMA 5-15P 4.3m line cord46M2592A1RF10A/250V C13 to NEMA 6-15P 2.8m line cord39Y79306222Argentina 10A/250V C13 to IRAM 2073 2.8m line cord39Y79246211Australia/NZ 10A/250V C13 to AS/NZ 3112 2.8m line cord39Y79296223Brazil 10A/125V C13 to NBR 6147 2.8m line cord39Y79286210China 10A/250V C13 to GB 2099.1 2.8m line cord39Y79186213Denmark 10A/250V C13 to DK2-5a 2.8m line cord39Y79176212European 10A/230V C13 to CEE7-VII 2.8m line cord39Y79276269India 10A/250V C13 to IS 6538 2.8m line cord39Y79206218Israel 10A/250V C13 to SI 32 2.8m line cord39Y79216217Italy 10A/250V C13 to CEI 23-16 2.8m line cord46M2593A1RE Japan 12A/125V C13 to JIS C-8303 2.8m line cord39Y79256219Korea 12A/250V C13 to KETI 2.8m line cord39Y79226214South Africa 10A/250V C13 to SABS 164 2.8m line cord39Y79196216Switzerland 10A/250V C13 to SEV 1011-S24507 2.8m line cord00CG265A53E Taiwan 10A/250V C13 to CNS 10917-3 2.8m line cord00CG267A53F Taiwan 15A/125V C13 to CNS 10917-3 2.8m line cord39Y79236215United Kingdom 10A/250V C13 to BS 1363/A 2.8m line cord* Available for factory-built custom configurations and solutions only.Rack installationFigure 4. Lenovo DB720S Mid-mount Rack KitPhysical specificationsThe DB720S FC SAN Switch has the following dimensions and weight (approximate): Height: 44 mm (1.7 in.)Width: 440 mm (17.3 in.)Depth: 356 mm (14.0 in.)Weight: 7.17 kg (15.8 lb) with two power supply FRUs, without transceiversExternal backup unitsThe following table lists the external backup options that are offered by Lenovo that can be used in Lenovo FC SAN solutions.Note: Information provided in this section is for ordering reference purposes only. End-to-end LTO Ultrium configuration support for a particular tape backup unit must be verified through the System Storage Interoperation Center (SSIC):/systems/support/storage/ssicTable 9. External Fibre Channel backup optionsPart number DescriptionExternal tape backup libraries6741A1F IBM TS4300 3U Tape Library-Base UnitFibre Channel backup drives for TS4300 Tape Library - Full Height01KP938LTO 7 FH Fibre Channel Drive01KP954LTO 8 FH Fibre Channel Drive02JH837LTO 9 FH Fibre Channel DriveFibre Channel backup drives for TS4300 Tape Library - Full Height01KP936LTO 7 HH Fibre Channel Drive01KP952LTO 8 HH Fibre Channel Drive02JH835LTO 9 HH Fibre Channel DriveFor more information, see the list of Product Guides in the Tape Autoloaders and Libraries category: https:///storage/tape/libraryRack cabinetsRack cabinetsThe following table lists the supported rack cabinets.Table 10. Rack cabinetsPart number Description93072RX 25U Standard Rack (1000mm)93072PX 25U Static S2 Standard Rack (1000mm)7D6DA007WW ThinkSystem 42U Onyx Primary Heavy Duty Rack Cabinet (1200mm)7D6DA008WW ThinkSystem 42U Pearl Primary Heavy Duty Rack Cabinet (1200mm)93604PX 42U 1200mm Deep Dynamic Rack 93614PX 42U 1200mm Deep Static Rack 93634PX 42U 1100mm Dynamic Rack93634EX 42U 1100mm Dynamic Expansion Rack 93074RX 42U Standard Rack (1000mm)7D6EA009WW ThinkSystem 48U Onyx Primary Heavy Duty Rack Cabinet (1200mm)7D6EA00AWWThinkSystem 48U Pearl Primary Heavy Duty Rack Cabinet (1200mm)For specifications about these racks, see the Lenovo Rack Cabinet Reference, available from:https:///lp1287-lenovo-rack-cabinet-referenceFor more information, see the list of Product Guides in the Rack cabinets category:https:///servers/options/racksPower distribution unitsThe following table lists the power distribution units (PDUs) that are offered by Lenovo.Table 11. Power distribution unitsPart number Feature code Description 0U Basic PDUs00YJ776ATZY 0U 36 C13/6 C19 24A 1 Phase PDU N Y Y N N N N N N Y Y Y N 00YJ777ATZZ 0U 36 C13/6 C19 32A 1 Phase PDU Y Y N Y Y Y Y Y Y N N Y Y 00YJ778AU000U 21 C13/12 C19 32A 3 Phase PDU Y Y N Y Y Y Y Y Y N N Y Y 0U Switched and Monitored PDUs00YJ783AU040U 12 C13/12 C19 Switched and Monitored48A 3 Phase PDUN N Y N N N Y N N Y Y Y N 00YJ781AU030U 20 C13/4 C19 Switched and Monitored 24A 1 Phase PDUN N Y N Y N Y N N Y Y Y N 00YJ782AU020U 18 C13/6 C19 Switched and Monitored 32A 3 Phase PDUY Y Y Y Y Y Y Y Y N Y N Y 00YJ780AU010U 20 C13/4 C19 Switched and Monitored 32A 1 Phase PDUY Y Y Y Y Y Y Y Y N Y N Y1U Switched and Monitored PDUsA N ZA S E A NB r a z i lE E T M E A R U C I SW E H T KI N D I A J A P A NL A N A P R C4PU7A81117BNDV1U 18 C19/C13 switched and monitored 48A3P WYE PDU - ETLN N N N N N N N N N N Y N4PU7A77467BLC41U 18 C19/C13 Switched and Monitored 80A3P Delta PDUN N N N N N N N N Y N Y N4PU7A77469BLC61U 12 C19/C13 switched and monitored 60A3P Delta PDUN N N N N N N N N N N Y N4PU7A77468BLC51U 12 C19/C13 switched and monitored 32A3P WYE PDUY Y Y Y Y Y Y Y Y N Y Y Y4PU7A81118BNDW1U 18 C19/C13 switched and monitored 48A3P WYE PDU - CEY Y Y Y Y Y Y Y Y N Y N Y 1U Ultra Density Enterprise PDUs (9x IEC 320 C13 + 3x IEC 320 C19 outlets)71763NU6051Ultra Density Enterprise C19/C13 PDU60A/208V/3PHN N Y N N N N N N Y Y Y N71762NX6091Ultra Density Enterprise C19/C13 PDUModuleY Y Y Y Y Y Y Y Y Y Y Y Y 1U C13 Enterprise PDUs (12x IEC 320 C13 outlets)39M28166030DPI C13 Enterprise PDU Plus Module (WW)Y Y Y Y Y Y Y Y Y Y Y Y Y 39Y89416010DPI C13 Enterprise PDU Module (WW)Y Y Y Y Y Y Y Y Y Y Y Y Y 1U C19 Enterprise PDUs (6x IEC 320 C19 outlets)39Y89486060DPI C19 Enterprise PDU Module (WW)Y Y Y Y Y Y Y Y Y Y Y Y Y 1U Front-end PDUs (3x IEC 320 C19 outlets)39Y89386002DPI Single-phase 30A/120V Front-end PDU(US)Y Y Y Y Y Y Y Y Y Y Y Y Y39Y89396003DPI Single-phase 30A/208V Front-end PDU(US)Y Y Y Y Y Y Y Y Y Y Y Y Y39Y89346005DPI Single-phase 32A/230V Front-end PDU(International)Y Y Y Y Y Y Y Y Y Y Y Y Y39Y89406004DPI Single-phase 60A/208V Front-end PDU(US)Y N Y Y Y Y Y N N Y Y Y N39Y89356006DPI Single-phase 63A/230V Front-end PDU(International)Y Y Y Y Y Y Y Y Y Y Y Y Y 1U NEMA PDUs (6x NEMA 5-15R outlets)39Y89055900DPI 100-127V NEMA PDU Y Y Y Y Y Y Y Y Y Y Y Y Y Line cords for 1U PDUs that ship without a line cord40K96116504 4.3m, 32A/380-415V, EPDU/IEC 3093P+N+G 3ph wye (non-US) Line CordY Y Y Y Y Y Y Y Y Y Y Y Y40K96126502 4.3m, 32A/230V, EPDU to IEC 309 P+N+G(non-US) Line CordY Y Y Y Y Y Y Y Y Y Y Y Y40K96136503 4.3m, 63A/230V, EPDU to IEC 309 P+N+G(non-US) Line CordY Y Y Y Y Y Y Y Y Y Y Y Y40K96146500 4.3m, 30A/208V, EPDU to NEMA L6-30P(US) Line CordY Y Y Y Y Y Y Y Y Y Y Y Y40K96156501 4.3m, 60A/208V, EPDU to IEC 309 2P+G(US) Line Cord N N Y N N N Y N N Y Y Y NPart number Featurecode Description ANZASEABraziEETMEARUCIWEHTKINDIAJAPALANAPRC40K96176505 4.3m, 32A/230V, Souriau UTG Female toAS/NZ 3112 (Aus/NZ) Line Cord Y Y Y Y Y Y Y Y Y Y Y Y Y 40K961865064.3m, 32A/250V, Souriau UTG Female to KSC 8305 (S. Korea) Line CordY Y Y Y Y Y Y Y Y Y Y Y YPart number Feature code Description For more information, see the Lenovo Press documents in the PDU category:https:///servers/options/pduUninterruptible power supply unitsThe following table lists the uninterruptible power supply (UPS) units that are offered by Lenovo.Table 12. Uninterruptible power supply unitsPart number Description55941AX RT1.5kVA 2U Rack or Tower UPS (100-125VAC)55941KX RT1.5kVA 2U Rack or Tower UPS (200-240VAC)55942AX RT2.2kVA 2U Rack or Tower UPS (100-125VAC)55942KX RT2.2kVA 2U Rack or Tower UPS (200-240VAC)55943AX RT3kVA 2U Rack or Tower UPS (100-125VAC)55943KX RT3kVA 2U Rack or Tower UPS (200-240VAC)55945KX RT5kVA 3U Rack or Tower UPS (200-240VAC)55946KX RT6kVA 3U Rack or Tower UPS (200-240VAC)55948KX RT8kVA 6U Rack or Tower UPS (200-240VAC)55949KX RT11kVA 6U Rack or Tower UPS (200-240VAC)55948PX RT8kVA 6U 3:1 Phase Rack or Tower UPS (380-415VAC)55949PX RT11kVA 6U 3:1 Phase Rack or Tower UPS (380-415VAC)55943KT†ThinkSystem RT3kVA 2U Standard UPS (200-230VAC) (2x C13 10A, 2x GB 10A, 1x C19 16A outlets)55943LT†ThinkSystem RT3kVA 2U Long Backup UPS (200-230VAC) (2x C13 10A, 2x GB 10A, 1x C1916A outlets)55946KT†ThinkSystem RT6kVA 5U UPS (200-230VAC) (2x C13 10A outlets, 1x Terminal Block output)5594XKT†ThinkSystem RT10kVA 5U UPS (200-230VAC) (2x C13 10A outlets, 1x Terminal Block output)† Only available in China and the Asia Pacific market.For more information, see the list of Product Guides in the UPS category:https:///servers/options/upsRelated publications and linksA N ZA S E AB r a z i E E T M E A R UC I W E H T KI N D I A J A P A L A N A P R CTrademarksLenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web athttps:///us/en/legal/copytrade/.The following terms are trademarks of Lenovo in the United States, other countries, or both:Lenovo®Lenovo ServicesThinkSystem®The following terms are trademarks of other companies:Excel® and Microsoft® are trademarks of Microsoft Corporation in the United States, other countries, or both.Other company, product, or service names may be trademarks or service marks of others.。
Cisco设备型号编码详解
Cisco设备型号编码详解1. CISCO 开头的产品都是路由器；2. RSP 开头的都是CISCO7500系列产品的引擎；3. VIP 开头的产品都是CISCO 7500系列产品的多功能接口处理器模块；4. PA 开头的产品都是CISCO 7500/7200系列产品的模块；5. NPE 开头的都是CISCO7200系列产品的引擎；6. NM 开头的都是CISCO低端路由器模块；7. WIC 开头的都是CISCO低端路由器的广域网接口模块；8. VWIC 开头的都是CISCO低端路由器的语音接口模块；9. WS-C 开头的产品都是交换机；10. WS-X 开头的产品是交换机的引擎或模块；11. WS-G 开头的产品是交换机的千兆光纤模块。
关键字：TT:适用2960 CE500交换机，表示电口TC:适用2960 CE500交换机,表示电口＋双介质口LC:适用CE500,包括POE＋电口＋2SFPTS：适用3560，3750 表示电口＋SFPPS：适用3560,3750 表示POE＋SPFT：适用3750，仅电口TD：适用3750，表示电口＋10GBEcisco路由的命名规则都是以CISCO开头比如：cisco1721，cisco2621，cisco3662，cisco3745。
这些都是路由器。
比如：cisco2621其中cisco：是品牌，后面的前两位数字是系列号，这款产品属于2600系列，后两位是具体的型号。
其中cisco路由器有以下几个系列：cisco2500系列：cisco2501、cisco2502、一直到cisco2514，这些都是国内能见到的设备，再往上就是国外的了，国内很少见到。
cisco1700：1720、1721、1751、1760cisco1800：1821、1841cisco2600系列：2610、2611、2620、2621、2651cisco2600XM系列：2610XM、2611XM、2620XM、2621XMcisco3600：3620、3640、3660cisco3700：3725、3745cisco3800：3825、3845cisco7200：7204、7206、7204VXR、7206VXR这些都是机箱，使用当中需要引擎的支持（NPE-225、NPE-300、NPE-400、NPE-G1、最新的是NPE-G2）和业务模块的支持东西很多了，这就不写了。
N921 04 产品说明书 - 西门子水泵
SI-1801Fig. 101002003004001236455.4050 170260330Flow rate - Portata - Caudal - Fördermenge - Caudal - Hoeveelheid SI82CE01UN23 - SI82CE02UN23 - SI1800SCUN23 - SI1802CUN23 - SI1802SCAN23CACC00220Ø 10 - 20 mm Ø 3/8’’ - 3/4’’BACC02040Ø 15/17 - 20 - 24/25 - 32 - 40 mm Ø int 5/8’’- 3/4’’- 1’’- 1 1/4’’ - 1 1/2’’*A DØ 10 - 10 mm Ø 3/8’’ - 3/8’’ACC00105Ø 10 mm int - 5 m Ø int 3/8’’- 16 1/2 ftFig. 5pH ≤ 3+ pH Safe 1,ref : PH0100SIUN23Ø 40 mm, 1 1/2’’Ø 32 mm, 1 1/4’’Ø 24 - 25 mm, 1’’Ø 20 mm, 3/4’’Ø 15 - 17 mm, 5/8’’BM6 max.Fig. 7INBACC02040Ø 30 mm Ø 1 3/16 ’’262 mm - 10 5/16’’107,5 mm 4 1/4’’A.B.C.C DAA D CA OUTOUT * PLEASE NOTE *ALL PIPE CONNECTIONS MUST BE SECURED WITH A JUBILEE CLIP/CABLE TIEAØ 20 mmØ 3/4 ’’C. ACC00215ACC00215c< 0°C< 32°Fc< 0°C< 32°FPump powerPumpsafety switch Fig. 11Fig. 12CERTIFICAT DE CONFORMITE / CONFORMITY CERTIFICATE /BEREINSTIMMUNGSBESCHEINIGUNG / CERTIFICATO DI CONFORMITA’SAUERMANN - Z.I l’orée de Chevry - 77173 CHEVRY COSSIGNY- FRANCE- déclare que le produit pompe de relevage de condensats Si-82 / SI 1800 est conforme aux normes :- declares that the product Si-82 / SI 1800 condensate lift pump is in conformity with the standards :- erklärt, dass das Produkt, Kondensatförderpumpe Si-82 / SI 1800 den fogenden Normen entspricht :- dichiara che il prodotto pompa elevatrice di condensa Si-82 / SI 1800 conforme alle norme :EN 60335-1EN 60335-2-41EN 55014-1, EN 55014-2EN 61000-3-2, EN 61000-3-3EN 62233:2008- Nous vous rappelons qu’il est interdit de mettre en service la pompe avant que la machine dans laquelle elle est incorporée n’ait été déclarée conforme aux dispositions de la directive machine 2006/95/CE et de la directive compatibilité électromagnétique 2004/108/CE- Please note that it is prohibited to put this pump into service before the machine in which it is incorporated has been declared to conform with the provisions of machine directive 2006/95/CE and with the electromagnetic compatibility directive 2004/108/CE- Wir weisen darauf hin, daß es untersagt ist, die Pumpe in Betrieb zu nehmen, bevor die Maschine, in die sie integriert ist, den Bestimmungen der Maschinenrichtlinie 2006/95/CE und der elektromagnetischen Richtlinie entspricht 2004/108/CE- Si ricorda che è vietato mettere in moto la pompa prima che la macchina nella quale essa si trova incorporata sia stata dichiarata conforme alle disposizioni della direttiva macchina 2006/95/CE e della direttiva compatibilitá electromagnetica 2004/108/CEPourtouteinformation/Forfurtherinformation:*****************。
Cisco Nexus B22 Fabric Extender for Flex System产品指
Cisco Nexus B22 Fabric Extender for Flex System Product GuideThe Cisco Nexus B22 Fabric Extender for Flex System™ (Cisco Nexus model B22IBM) is designed to simplify data center server access architecture and operations. Clients looking for Cisco connectivity inside the Flex System chassis can now leverage the new module to reduce management and offer easy connectivity to existing Nexus infrastructure.The Cisco Nexus B22 Fabric Extender eliminates the need to configure each networking device or individual ports, therefore reducing the number of management points. It provides a low latency, loop-free interface that does not rely upon Spanning Tree Protocols, therefore removing one of the greatest deployment and management complexities of a traditional switch.The Cisco Nexus B22 Fabric Extender for Flex System is shown in the following figure.Figure 1. Cisco Nexus B22 Fabric Extender for Flex SystemDid you know?The Cisco Nexus B22 Fabric Extender behaves like a remote line card for a parent Cisco Nexus switch, together forming a distributed modular system. This architecture simplifies data center access operations and architecture by combining the management simplicity of a single high-density access switch with the cabling simplicity of switches integrated into a chassis and top-of-rack (ToR) access switches.The B22 Fabric Extender provides transparent Flex System connectivity to your existing Cisco Nexus network. It aggregates compute node ports by appearing as a simple pass-thru device, and the upstream network sees a "large pipe" of server traffic coming to and from the chassis. With the B22 Fabric Extender, your network administration team continues to use the same network management tools that are deployed in the network to manage the connectivity from the physical servers in the chassis to the upstream network. Integrated or mezzanine Virtual Fabric adapters, combined with the Cisco Nexus B22 Fabric Extender for Flex System, offer network flexibility with virtual network interface controllers (NICs) (vNICs) supporting Ethernet, Internet Small Computer System Interface (iSCSI), and Fibre Channel over Ethernet (FCoE) connectivity.Click here to check for updatesFigure 2. Location of the switch bays in the Flex System Enterprise ChassisThe connections between the supported adapters that are installed in the compute nodes to the Cisco Nexus B22 Fabric Extender for Flex System modules that are installed in the I/O bays in the chassis are shown in the following figure. The following figure also shows both half-wide servers, such as the x240 with two adapters, and full-wide servers, such as the x440 with four adapters.Figure 3. Logical layout of the interconnects between I/O adapters and B22 Fabric ExtendersThe Cisco Nexus B22 Fabric Extender for Flex System can be installed in bays 1, 2, 3, and 4 of the Enterprise Chassis. A supported adapter must be installed in the corresponding slot of the compute node (slot A1 when interconnect modules are installed in bays 1 and 2 or slot A2 when the modules are in bays 3 and 4). With four-port and eight-port adapters, only two ports are used for communications, and the remaining ports (two or six ports respectively) are not used.In compute nodes that have an integrated dual-port 10 GbE network interface controller (NIC), NIC ports are routed to bays 1 and 2 with a specialized periscope connector, and the adapter in slot A1 is not required. However, when needed, the periscope connector can be replaced with the adapter. In such a case, the integrated NIC is disabled.x222 compute node: The x222 compute nodes are not supported with the Cisco Nexus B22 Fabric Extender for Flex System.The following table shows the connections between adapters that are installed in the compute nodes to the Cisco Nexus B22 Fabric Extender for Flex System modules installed in the I/O bays in the chassis.Table 3. Adapter to I/O bay correspondence with the Cisco Nexus B22 Fabric Extender for Flex SystemI/O adapter slot in the server Port on the adapter Corresponding I/O bay in the chassisBay 1Bay 2Bay 3Bay 4Slot 1 (or integrated dual-port LOM - ports 1 and 2)Port 1YesPort 2YesSlot 2Port 1YesPort 2YesSlot 3(full-wide compute nodes only)Port 1YesPort 2YesSlot 4(full-wide compute nodes only)Port 1YesPort 2YesThe following table lists the I/O adapters that are supported by the Cisco Nexus B22 Fabric Extender for Flex System.Table 4. Supported network adaptersDescription Partnumber Feature code10 Gb EthernetEmbedded 10Gb Virtual Fabric Adapter (x240, x440; 2-port)*None None Flex System CN4022 2-port 10Gb Converged Adapter88Y5920A4K3 Flex System CN4052 2-port 10Gb Virtual Fabric Adapter00JY800A5RP Flex System CN4052S 2-port 10Gb Virtual Fabric Adapter00AG540ATBT Flex System CN4054 10Gb Virtual Fabric Adapter (4-port)#90Y3554A1R1 Flex System CN4054R 10Gb Virtual Fabric Adapter (4-port)#00Y3306A4K2 Flex System CN4054S 10Gb Virtual Fabric Adapter (4-port)#00AG590ATBS Flex System CN4058S 8-port 10Gb Virtual Fabric Adapter#94Y5160A4R6 Flex System EN4132 2-port 10Gb Ethernet Adapter90Y3466A1QY 1 Gb EthernetEmbedded 1 Gb Ethernet controller (2-port)None None Flex System EN2024 4-port 1Gb Ethernet Adapter#49Y7900A10Y * The Embedded 10Gb Virtual Fabric Adapter is included in some models of the x240 and x440.# With four-port or eight-port adapters, only two adapter ports can be used, and the remaining ports are not used.Figure 4. Location of the I/O adapter slots in the Flex System x240 Compute NodeFigure 5. Front panel of the Cisco Nexus B22 Fabric Extender for Flex SystemThe most common connectivity topologies for the Cisco Nexus B22 Fabric Extender for Flex System that can be used with Cisco Nexus upstream network devices are shown in Figure 6 and Figure 7.Figure 6. B22 Fabric Extender connectivity topology - Link AggregationIn this sample loop-free redundant topology, each Cisco Nexus B22 Fabric Extender for Flex System is physically connected to a separate Top-of-Rack (ToR) switch with static or EtherChannel aggregated links. Compute node NICs are configured in an active/active NIC teaming.Figure 7. B22 Fabric Extender connectivity topology - Virtual Link AggregationIn this loop-free topology, aggregation is split between two physical switches, which appear as a single logical switch, and each Cisco Nexus B22 Fabric Extender for Flex System is connected to both ToR switches through static or EtherChannel aggregated links. Compute Node NICs can be configured in an active/passive or active/active NIC teaming.With both topologies, each port of the compute node's NIC can be divided in up to four virtual NICs (vNICs).Cisco Nexus B22 Fabric Extender for Flex System in the converged FCoE networkCisco Nexus B22 Fabric Extender for Flex System supports Data Center Bridging (DCB), and it can transport FCoE frames by using FCoE Initialization Protocol (FIP) snooping. These B22 Fabric Extenders provide an inexpensive solution for transporting encapsulated FCoE packets to the Fibre Channel Forwarder (FCF), which is functioning as both an aggregation switch and an FCoE gateway, such as the Cisco Nexus 5000 Series. The following figure shows a sample scenario.Figure 8. B22 Fabric Extender in the FCoE network with the Cisco Nexus 5548/5596 as an FCFTrademarksLenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web athttps:///us/en/legal/copytrade/.The following terms are trademarks of Lenovo in the United States, other countries, or both:Lenovo®Flex SystemOther company, product, or service names may be trademarks or service marks of others.。
DPI OEM出口型号对照
Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator Radiator
Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda
Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda Honda
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
NAS122, Workshop 10b, January 2004 Copyright© 2004 MSC.Software Corporation
WS10b-4
Step 1. File / Open
a
b
Open the database called ws10a.db. a. File / Open. b. Select ws10a.db. c. Click OK.
Submit the model for analysis (cont.). a. Click Apply. b. Click Cancel. c. Click on Subcase Select. d. Select freq_response and de-select Default. e. Click OK. f. Click Apply.
a f e d
h
b g
c
NAS122, Workshop 10b, January 2004 Copyright© 2004 MSC.Software Corporation WS10b-13
Step 5. Analysis: Analyze / Restart / Full Run (Cont.)
a e
b c
d
g f
NAS122, Workshop 10b, January 2004 Copyright© 2004 MSC.Software Corporation WS10b-7
Step 4. Loads/BCs: Create / Pressure / Element Uniform
Create the frequency dependent pressure for the plates. a. Loads/BCs: Create / Pressure / Element Uniform. b. Enter right_side for the New Set Name. h c. Switch to 2D for the Target Element Type. d. Click on the Input Data button. e. Enter 4 for Top Surf Pressure, and select i field for the Time/Freq. j Dependent Field. f. Click OK. g. Click on Select Application Region. h. Change the Geometry Filter to FEM. i. Select the right plate (see Figure 10b-1). j. Click Add, and click OK. k. Click Apply. NAS122, Workshop 10b, January 2004 Copyright© 2004 MSC.Software Corporation
Figure 10b-1
NAS122, Workshop 10b, January 2004 Copyright© 2004 MSC.Software Corporation WS10b-10
Step 5. Analysis: Analyze / Restart / Full Run
Submit the model for analysis. a. Analysis: Analyze / Restart / Full Run. b. Select ws10a from the Select an Initial Job field. c. Enter ws10b for the Job Name. d. Click on Solution Type. e. Select FREQUENCY RESPONSE. f. Click OK.
1. 2. 3. 4. 5.
6. 7. 8.
Open the database called ws10a.db. Create a non-spatial field for the load. Create a time dependent load case. Create the frequency dependent pressure for the plates. Submit the model to MSC.Nastran for analysis using the Restart option. Attach the .XDB results file. Post Process results – create X vs Y graph of displacements. Modify the scale of Y-axis to examine the detail of the plot.
a
g
d
h i b e
c i j f
NAS122, Workshop 10b, January 2004 Copyright© 2004 MSC.Software Corporation
WS10b-9
Step 4. Loads/BCs: Create / Pressure / Element Uniform (Cont.)
WORKSHOP 10B FREQUENCY RESPONSE ANALYSIS OF A CIRCUIT BOARD
NAS122, Workshop 10b, January 2004 Copyright© 2004 MSC.Software Corporation
WS10b-1
NAS122, Workshop 10b, January 2004 Copyright© 2004 MSC.Software Corporation
c
NAS122, Workshop 10b, January 2004 Copyright© 2004 MSC.Software Corporation
WS10b-5
Step 2. Field: Create / Non Spatial / Tabular Input
Create a Non Spatial field for the load. a. Fields: Create / Non Spatial / Tabular Input. b. Enter field for the Field Name. c. Select Frequency (f) as the Active Independent Variable. d. Click Input Data. e. Enter the data shown in the table. f. Click OK. g. Click Apply.
WS10b-2
FREQUENCY RESPONSE ANALYSIS OFption
This workshop is a continuation of Workshop 10a. In this workshop, the user will perform a Frequency Response Analysis and verify the results with the normal modes results from Workshop 10a.
d
e
c f
WS10b-14
a
b
NAS122, Workshop 10b, January 2004 Copyright© 2004 MSC.Software Corporation
b
c
d a
NAS122, Workshop 10b, January 2004 Copyright© 2004 MSC.Software Corporation
WS10b-12
Step 5. Analysis: Analyze / Restart / Full Run (Cont.)
Submit the model for analysis (cont.). a. Click on DEFINE FREQUENCIES. b. Enter the data shown in the table. c. Click OK. d. Select Struct. Damp. (G). e. Click on DEFINE MODAL DAMPING. f. Enter the damping data shown in the table. g. Click OK. h. Click OK.
NAS122, Workshop 10b, January 2004 Copyright© 2004 MSC.Software Corporation
WS10b-3
FREQUENCY RESPONSE ANALYSIS OF A CIRCUIT BOARD
Suggested Exercise Steps
a
e b
c
f
d
g
NAS122, Workshop 10b, January 2004 Copyright© 2004 MSC.Software Corporation WS10b-6
Step 3. Load Cases: Create
Create a Time Dependent load case. a. Load Cases: Create b. Enter freq_response for the Load Case Name. c. Select Time Dependent as the Load Case Type. d. Click Assign/Prioritize Loads/ BCs. e. Click on the Displ_constraint in the Select Individual Loads/BCs field. f. Click OK. g. Click Apply.