水族灯说明书

LED Smart Remote Operating Instructions
1. The main parameters:
1. Input voltage:12Vac/200MA
2. working environment temperature range: (-20℃+40℃) Under normal temperature conditions
3. Storage temperature range: 25℃
2.Sequential Function:
1: Data 1: The current date setting:
2: Time 2: The current time setting:
3: LED DUTY 3: To adjust the brightness setting:
4: Auto 4: Simulate sunrise and sunset in 24 hours 5: Flash 5: Lightning mode:
6: Cloud 6: cloud mode:
7: Time Range 7: Definite time mode: Timing segments(24
divided 12 hours),
The splitter(1-4 channels) Independent dimming
8: Reset 8: Reset the Original set:
Remote control Function Description:
As follows (NO / OFF) dimming power key, (UP)/(DOWN)/(LEFT)/(RIGHT)/(OK), the control system(▲) (▼)(◄)(►)(ENT) and (MENU) function Menu key there (RETUR) page return key.
4. Program Procedure:
1: Date Adjustment.
Eg: (1) Key to enter the menu options: MENU, choose Data, press(OK) enter the date adjustment.
2: Time Adjustment.
Eg: (1) Key to enter the menu options: MENU, choose Time, press(OK) enter the time adjustment.
3: LED DUTY T o set the current brightness setting.
Eg: (1)Key to enter the menu options: MENU, choose LED DUTY, press(OK) enter adjustment is ON, then press RIGHT key to adjust each channel brightness.
4: Imitate Sunrise and sunset automatically in 24 hours, each channel bright Density can change from1% to 100%. Bright flux can darken gradually.
Eg: (1) Key to enter the menu options: MENU, choose Auto, press(OK) enter adjustment is ON, then press OK enter the automatic mode.
LED1: Blend of royal blue and 410nm violet
LED2: Blend of Cool white and 630nm red
5. Lightning mode:
Each channel leds all lightning Regularly cycle by cycle (channel 1-4) every per second flash three times to imitate lightning.
Eg:(1) Key to enter the menu options: MENU, press Flash, press(OK) enter adjustment is ON. Then press OK to confirm enter the lightning mode.
6.Cloud mode:
Each channel all leds are cycle by cycle regularly(channel1-4) Darken to imitate the movement due to changes in light caused by clouds.
Eg:(1) Key to enter the menu options: MENU, choose Cloud, press(OK) to
adjust to is ON, then press OK to confirm enter the cloud mode.
7. 12-stage timer:
Two channels, 12 period of time
setting, Time can to the minute,
bright Density can change from
1% to 100%
Eg:(1) Key to enter the menu options: MENU, choose Time Range, press(OK) to adjust to is ON, then press OK to confirm enter, then press RIGHT to start time and end time to adjust first paragraph, then press RIGHT enter adjust the brightness of each channel, and so on.
8. Reset factory settings:
When the program Confusion, Select Reset factory settings.
Eg: Key to enter the menu options: MENU, choose Reset, press(OK) to adjust to is ON, then press OK confirm enter reset to factory setting. 9. After in total off power, and want to work it again, just Turn on the power, it can worked automatically as before you setting.
Installment Way for Aura Seires LED Aquarium Light
1.Stand mounting method
2.Hanger mounting method
3.Plug AC100-240v, it will be ok Length splicing
Width splicing。