350GE162U6R3C中文资料

合集下载

GBPC3506W;GBPC3502;GBPC3510W;GBPC3510;GBPC1506;中文规格书,Datasheet资料

The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is notAccuPower¥Auto-SPM¥Build it Now¥CorePLUS¥CorePOWER¥CROSSVOLT¥CTL¥Current Transfer Logic¥DEUXPEED®Dual Cool™ EcoSPARK®EfficientMax¥ESBC¥®Fairchild®Fairchild Semiconductor®FACT Quiet Series¥FACT®FAST®FastvCore¥FETBench¥FlashWriter®*FPS¥F-PFS¥FRFET®Global Power Resource SMGreen FPS¥Green FPS¥ e-Series¥G max¥GTO¥IntelliMAX¥ISOPLANAR¥MegaBuck¥MICROCOUPLER¥MicroFET¥MicroPak¥MicroPak2¥MillerDrive¥MotionMax¥Motion-SPM¥OptoHiT™OPTOLOGIC®OPTOPLANAR®®PDP SPM™Power-SPM¥PowerTrench®PowerXS™Programmable Active Droop¥QFET®QS¥Quiet Series¥RapidConfigure¥¥Saving our world, 1mW/W/kW at a time™SignalWise¥SmartMax¥SMART START¥SPM®STEALTH¥SuperFET¥SuperSOT¥-3SuperSOT¥-6SuperSOT¥-8SupreMOS®SyncFET¥Sync-Lock™®*The Power Franchise®TinyBoost¥TinyBuck¥TinyCalc¥TinyLogic®TINYOPTO¥TinyPower¥TinyPWM¥TinyWire¥TriFault Detect¥TRUECURRENT¥*P SerDes¥UHC®Ultra FRFET¥UniFET¥VCX¥VisualMax¥XS™* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.DISCLAIMERFAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.LIFE SUPPORT POLICYFAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.As used herein:1. Life support devices or systems are devices or systems which, (a) areintended for surgical implant into the body or (b) support or sustain life,a nd (c) whose fa ilure to perform when properly used in a ccorda ncewith instructions for use provided in the la beling, ca n be rea sona bly expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, orsystem whose fa ilure to perform ca n be rea sona bly expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.ANTI-COUNTERFEITING POLICYFairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, , under Sales Support.Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.PRODUCT STATUS DEFINITIONSDefinition of TermsDatasheet Identification Product Status Definition分销商库存信息:FAIRCHILDGBPC3506W GBPC3502GBPC3510W GBPC3510GBPC1506GBPC2502 GBPC2506GBPC3504GBPC12005 GBPC1202W GBPC1202GBPC1210 GBPC1201GBPC1204W GBPC1206W GBPC1210W GBPC1206GBPC1208 GBPC1204GBPC1201W GBPC15005 GBPC1501GBPC1510W GBPC1506W GBPC1501W GBPC1504W GBPC1510 GBPC1508GBPC1502W GBPC1502 GBPC1508W GBPC1504GBPC15005W GBPC2501GBPC2508GBPC25005 GBPC2504GBPC3504W GBPC3508W GBPC3501W GBPC35005W GBPC3502W GBPC2510GBPC3508GBPC3501 GBPC35005GBPC3506GBPC2501W GBPC2502W GBPC25005W GBPC2508W GBPC2506W GBPC2510W。

NEC Tokin Product Guide

10K 1K 100 10
Impedance (⏲)
02-200
10K 1K 100 10
02-100
02-300
02-500
02-101
3 6 1 3 6 1 3 6 1 3 6 1 3
1 1K
10K
100K
1M
10M
30M
1 1K
3
6
1
3
6
1
3
6
1
3
6
1
3
10K
100K
1M
10M
30M
Frequency (Hz)
●本PDF商品目录的内容发生变更或停止生产時，恕不另行通知，请在订购时确认最新信息。 ●在订购本PDF商品目录中的产品时，请申请交货规格书，以便进一步确认更详细的规格参数。 ●在使用本PDF商品目录中的产品时，请确认印刷版商品目录中的“安全相关注意事项”的内容以及其他与安全有关的注意事项。
0001EMCVOL01C1503E1
0001EMCVOL01C1503E1
公模
SC Coils 标准型
[RoHS [RoHS 对应品对应品] ]
型号
最大定额电流 (A)
SC-02-101 SC-02-100 SC-02-200 SC-02-300 SC-02-500 SC-02-800 SC-05-100 SC-05-200 SC-05-500 SC-05-800 SC-10-100 SC-10-200 SC-15-100 SC-15-200 SC-20-100 SC-30-100
2 2 2 2 5 5 5 4 4 10 10 10 12 15 15 18
电感值 (mH) 最小 1 2 3 5 1 2 3 5 8 1 2 3 1.5 0.5 1 0.5

西门子变频器160-qr002_说明书

20-230/460 1 Volt
230/460
37 [Max. Voltage]
20-255/510 1 Volt
230/460
38 [Boost Select]
0-12
Start Volts (%) Midpoint (%) 2
0=0
9 = 45.0
1 = 2.5
10 = 40.0
2 = 5.0
Direction LEDs (Indicators) The appropriate LED will illuminate continuously to indicate the commanded direction of rotation. If the second LED is flashing, the drive has been commanded to change direction, but is still decelerating. Important: Actual motor rotation could be different if motor leads are not connected properly. Refer to Chapter 4 of the User Manual for details on how to verify motor rotation.
Stop Pressing the Stop key will cause the motor to stop, using the selected stop mode. Refer to the P34 - [Stop Mode] parameter. If the drive has stopped due to a fault, pressing this key will clear the fault. Reverse (Change Direction) Pressing this key causes the motor to ramp down to 0 Hz and then ramp up to its set speed in the opposite direction. When the motor is running, pressing this key causes the (currently illuminated) LED to flash, indicating motor rotation while decelerating to zero. The other LED will illuminate indicating the commanded direction.

UC3526ANG4资料

UC2526A UC3526ARegulating Pulse Width ModulatorFEATURES•Reduced Supply Current •Oscillator Frequency to 600kHz •Precision Band-Gap Reference •7 to 35V Operation•Dual 200mA Source/Sink Outputs •Minimum Output Cross-Conduction •Double-Pulse Suppression Logic •Under-Voltage Lockout •Programmable Soft-Start •Thermal Shutdown•TTL/CMOS Compatible Logic Ports •5 Volt Operation (V IN = V C = V REF = 5.0V)DESCRIPTIONThe UC1526A Series are improved-performance pulse-width modu-lator circuits intended for direct replacement of equivalent non- “A”versions in all applications. Higher frequency operation has been enhanced by several significant improvements including: a more ac-curate oscillator with less minimum dead time, reduced circuit de-lays (particularly in current limiting), and an improved output stage with negligible cross-conduction current. Additional improvements include the incorporation of a precision, band-gap reference gener-ator, reduced overall supply current, and the addition of thermal shutdown protection.Along with these improvements, the UC1526A Series retains the protective features of under-voltage lockout, soft-start, digital cur-rent limiting, double pulse suppression logic, and adjustable deadtime. For ease of interfacing, all digital control ports are TTL compatible with active low logic.Five volt (5V) operation is possible for “logic level” applications by connecting V IN, V C and V REF to a precision 5V input supply. Consult factory for additional information.RECOMMENDED OPERATING CONDITIONS(Note 3)Input Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +7V to +35V Collector Supply Voltage . . . . . . . . . . . . . . . . . . +4.5V to +35V Sink/Source Load Current (each output). . . . . . . . 0 to 100mA Reference Load Current. . . . . . . . . . . . . . . . . . . . . . 0 to 20mA Oscillator Frequency Range. . . . . . . . . . . . . . . . 1Hz to 600kHz Oscillator Timing Resistor. . . . . . . . . . . . . . . . . . . 2k Ω to 150k ΩOscillator Timing Capacitor. . . . . . . . . . . . . . . . . 400pF to 20µF Available Deadtime Range at 40kHz . . . . . . . . . . . . 1% to 50%Operating Ambient Temperature RangeUC1526A. . . . . . . . . . . . . . . . . . . . . . . . . . . . -55°C to +125°C UC2526A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . -25°C to +85°C UC3526A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to +70°C ABSOLUTE MAXIMUM RATINGS (Note 1, 2)Input Voltage (+V IN). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +40V Collector Supply Voltage (+V C ). . . . . . . . . . . . . . . . . . . . . +40V Logic Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +5.5V Analog Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +V IN Source/Sink Load Current (each output). . . . . . . . . . . . 200mA Reference Load Current. . . . . . . . . . . . . . . . . . . . . . . . . . 50mA Logic Sink Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15mA Power Dissipation at T A = +25°C (Note 2) . . . . . . . . . 1000mW Power Dissipation at T C = +25°C (Note 2). . . . . . . . . . 3000mW Operating Junction Temperature . . . . . . . . . . . . . . . . . . +150°C Storage Temperature Range . . . . . . . . . . . . . . -65°C to +150°C Lead Temperature (soldering, 10 seconds). . . . . . . . . . +300°CNote 1:Values beyond which damage may occur.Note 2: Consult packaging Section of Databook for thermallimitations and considerations of package.Note 3:Range over which the device is functional andparameter limits are guaranteed.+V IN = 15V, and over operating ambient temperature, unless otherwise specified T A = T J.Note 4:I L = 0mA.Note 5:Guaranteed by design, not 100% tested in production. Note 6:F OSC = 40kHz, (R T = 4.12kΩ± 1%, C T = 0.01µF± 1%, R D = 0 Ω).Note 7:V CM = 0 to +5.2VNote 8:V CM = 0 to +12V.Note 9:V C = +15V.Note 10:V IN = +35V, R T = 4.12kΩ.ELECTRICAL CHARACTERISTICS:+V IN = 15V, and over operating ambient temperature, unless otherwise specified T A = TJ. Array Note 4:I L = 0mA.Note 5:Guaranteed by design, not 100% tested in production.Note 6:F OSC = 40kHz, (R T = 4.12kΩ± 1%, C T = 0.01µF± 1%,R D = 0 Ω).Note 7:V CM = 0 to +5.2VNote 8:V CM = 0 to +12V.Note 9:V C = +15V.Note 10:V IN = +35V, R T = 4.12kΩ.Open Loop Test Circuit UC1526AAPPLICATIONS INFORMATIONVoltage ReferenceThe reference regulator of the UC1526A is based on a precision band-gap reference, internally trimmed to ±1% accuracy. The circuitry is fully active at supply voltages above +7V, and provides up to 20mA of load current to external circuitry at +5.0V. In systems where additional current is required, an external PNP transistor can be used to boost the available current. A rugged low fre-quency audio-type transistor should be used, and leadlengths between the PWM and transistor should be as short as possible to minimize the risk of oscillations. Even so, some types of transistors may require collec-tor-base capacitance for stability. Up to 1 amp of load current can be obtained with excellent regulation if the device selected maintains high current gain.Soft-Start CircuitThe soft-start circuit protects the power transistors and rectifier diodes from high current surges during power supply turn-on. When supply voltage is first applied to the UC1526A, the under-voltage lockout circuit holds RESET LOW with Q3. Q1 is turned on, which holds the soft-start capacitor voltage at zero. The second collector of Q1 clamps the output of the error amplifier to ground, guaranteeing zero duty cycle at the driver outputs. When the supply voltage reaches normal operating range, RESET will go HIGH. Q1 turns off, allowing the internal 100µA current source to charge C S. Q2 clamps the error amplifier output to 1V BE above the voltage on C S. As the soft-start voltage ramps up to +5V, the duty cycle of the PWM linearly increases to whatever value the voltage regulation loop requires for an error null.Under-Voltage LockoutThe under-voltage lockout circuit protects the UC1526A and the power devices it controls from inadequate sup-ply voltage, If +V IN is too low, the circuit disables the output drivers and holds the RESET pin LOW. This pre-vents spurious output pulses while the control circuitry is stabilizing, and holds the soft-start timing capacitor in a discharged state.The circuit consists of a +1.2V bandgap reference and comparator circuit which is active when the reference voltage has risen to 3V BE or +1.8V at 25°C. When the reference voltage rises to approximately +4.4V, the cir-cuit enables the output drivers and releases the RESET pin, allowing a normal soft-start. The comparator has 350mV of hysteresis to minimize oscillation at the trip point. When +V IN to the PWM is removed and the refer-ence drops to +4.2V, the under-voltage circuit pulls RE-SET LOW again. The soft-start capacitor is immediately discharged, and the PWM is ready for another soft-start cycle.The UC1526A can operate from a +5V supply by con-necting the V REF pin to the +V IN pin and maintaining thesupply between +4.8 and +5.2V.Digital Control PortsThe three digital control ports of the UC1526A are bi-di-rectional. Each pin can drive TTL and 5V CMOS logic di-rectly, up to a fan-out of 10 low-power Schottky gates. Each pin can also be directly driven by open-collector TTL, open-drain CMOS, and open-collector voltage comparators; fan-in is equivalent to 1 low-power Schot-tky gate. Each port is normally HIGH; the pin is pulled LOW to activate the particular function. Driving SYNC LOW initiates a discharge cycle in the oscillator. Pulling SHUTDOWN LOW immediately inhibits all PWM outputpulses. Holding RESET LOW discharges the soft-start Figure 3.Soft-Start Circuit Schematiccapacitor. The logic threshold is +1.1V at +25°C. Noise immunity can be gained at the expense of fan-out with anexternal 2k pull-up resistor to +5V.OscillatorsThe oscillator is programmed for frequency and dead time with three components: R T, C T and R D. Two wave-forms are generated: a sawtooth waveform at pin 10 for pulse width modulation, and a logic clock at pin 12. The following procedure is recommended for choosing timing values:1. With R D= 0Ω(pin 11 shorted to ground) select values for R T and C T from the graph on page 4 to give the de-sired oscillator period. Remember that the frequency at each driver output is half the oscillator frequency, and the frequency at the +V C terminal is the same as the oscilla-tor frequency.2. If more dead time is required, select a larger value of R D. At 40kHz dead time increases by 400ns/Ω.3. Increasing the dead time will cause the oscillator fre-quency to decrease slightly. Go back and decrease the value of R T slightly to bring the frequency back to the nominal design value.The UC1526A can be synchronized to an external logic clock by programming the oscillator to free-run at a fre-quency 10% slower than the SYNC frequency.A periodic LOW logic pulse approximately 0.5µs wide at Error AmplifierThe error amplifier is a transconductance design, with an output impedance of 2MΩ. Since all voltage gain takes place at the output pin, the open-loop gain/frequency characteristics can be controlled with shunt reactance to ground. When compensated for unity-gain stability with 100pF, the amplifier has an open-loop pole at 800Hz. The input connections to the error amplifier are deter-mined by the polarity of the switching supply output volt-age. For positive supplies, the common-mode voltage is +5.0V and the feedback connections in Figure 6A are used. With negative supplies, the common-mode voltage is ground and the feedback divider is connected between the negative output and the +5.0V reference voltage, asshown in Figure 6B.the SYNC pin will then lock the oscillator to the external frequency.Multiple devices can be synchronized together by pro-gramming one master unit for the desired frequency, and then sharing its sawtooth and clock waveforms with the slave units. All C T terminals are connected to the C T pin of the master and all SYNC terminals are likewise con-nected to the SYNC pin of the master. Slave R T termi-nals are left open or connected to V REF. Slave R D terminal may be either left open or grounded.Figure 4. Digital Control Port SchematicError Amplifier ConnectionsTYPICAL CHARACTERISTICSOSCILLATOR PERIOD vs R T and C TOUTPUT BLANKINGSingle-Ended Configuration Driving N-Channel Power MOSFETsOutput DriversThe totem pole output drivers of the UC1526A are de-signed to source and sink 100mA continuously and 200mA peak. Loads can be driven either from the output pins 13 and 16, or from the +V C , as required.Since the bottom transistor of the totem-pole is allowed to saturate, there is a momentary conduction path from the+V C terminal to ground during switching; however, im-proved design has limited this cross-conduction period to less than 50ns. Capacitor decoupling at V C is recom-mended and careful grounding of Pin 15 is needed to in-sure that high peak sink currents from a capacitive load do not cause ground transients.UNITRODE INTEGRATED CIRCUITS7 CONTINENTAL BL VD. • MERRIMACK, NH 03054TEL. (603) 424-2410 • FAX (603) 424-3460TYPICAL CHARACTERISTICS (Cont.)UC3526APACKAGING INFORMATIONOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)85515022A ACTIVE LCCC FK201TBD POST-PLATE Level-NC-NC-NC8551502VA ACTIVE CDIP J181TBD A42SNPB Level-NC-NC-NCUC1526AJ ACTIVE CDIP J181TBD A42SNPB Level-NC-NC-NC UC1526AJ883B ACTIVE CDIP J181TBD A42SNPB Level-NC-NC-NC UC1526AL ACTIVE LCCC FK201TBD POST-PLATE Level-NC-NC-NC UC1526AL883B ACTIVE LCCC FK201TBD POST-PLATE Level-NC-NC-NC UC2526ADW ACTIVE SOIC DW1840Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARUC2526ADWTR ACTIVE SOIC DW182000Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARUC2526ADWTRG4ACTIVE SOIC DW182000Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEAR UC2526AJ ACTIVE CDIP J181TBD A42SNPB Level-NC-NC-NCUC2526AN ACTIVE PDIP N1820Green(RoHS&no Sb/Br)CU NIPDAU Level-NC-NC-NCUC2526ANG4ACTIVE PDIP N1820Green(RoHS&no Sb/Br)CU NIPDAU Level-NC-NC-NCUC2526AQ ACTIVE PLCC FN2046Green(RoHS&no Sb/Br)CU SN Level-2-260C-1YEARUC3526ADW ACTIVE SOIC DW1840Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARUC3526ADWG4ACTIVE SOIC DW1840Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARUC3526ADWTR ACTIVE SOIC DW182000Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARUC3526ADWTRG4ACTIVE SOIC DW182000Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEAR UC3526AJ ACTIVE CDIP J181TBD A42SNPB Level-NC-NC-NCUC3526AN ACTIVE PDIP N1820Green(RoHS&no Sb/Br)CU NIPDAU Level-NC-NC-NCUC3526ANG4ACTIVE PDIP N1820Green(RoHS&no Sb/Br)CU NIPDAU Level-NC-NC-NCUC3526AQ ACTIVE PLCC FN2046Green(RoHS&no Sb/Br)CU SN Level-2-260C-1YEAR(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan-The planned eco-friendly classification:Pb-Free(RoHS)or Green(RoHS&no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free(RoHS):TI's terms"Lead-Free"or"Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all6substances,including the requirement that lead not exceed0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Green(RoHS&no Sb/Br):TI defines"Green"to mean Pb-Free(RoHS compatible),and free of Bromine(Br)and Antimony(Sb)based flame retardants(Br or Sb do not exceed0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.元器件交易网IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,enhancements, improvements, and other changes to its products and services at any time and to discontinueany product or service without notice. Customers should obtain the latest relevant information before placingorders and should verify that such information is current and complete. All products are sold subject to TI’s termsand conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TIdeems necessary to support this warranty. Except where mandated by government requirements, testing of allparameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible fortheir products and applications using TI components. T o minimize the risks associated with customer productsand applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or processin which TI products or services are used. Information published by TI regarding third-party products or servicesdoes not constitute a license from TI to use such products or services or a warranty or endorsement thereof.Use of such information may require a license from a third party under the patents or other intellectual propertyof the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is withoutalteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproductionof this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable forsuch altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for thatproduct or service voids all express and any implied warranties for the associated TI product or service andis an unfair and deceptive business practice. TI is not responsible or liable for any such statements.Following are URLs where you can obtain information on other Texas Instruments products and applicationsolutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityTelephony /telephonyVideo & Imaging /videoWireless /wirelessMailing Address:Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright 2005, Texas Instruments Incorporated。

洛克特362 60EN 5C S 产品说明书

D622 500G REEL D622 500G REELSafety Data Sheet according to (EC) No 1907/2006Page 1 of 11LOCTITE 362 60EN 5C 0.7MM S known as 60EN 362 5CSDS No. : 175666V004.3Revision: 28.05.2015 printing date: 16.08.2016Replaces version from: 12.11.2013SECTION 1: Identification of the substance/mixture and of the company/undertaking1.1. Product identifierLOCTITE 362 60EN 5C 0.7MM S known as 60EN 362 5CContains:Rosin1.2. Relevant identified uses of the substance or mixture and uses advised againstIntended use: Solder Wire1.3. Details of the supplier of the safety data sheetHenkel IrelandOperations and Research Limited Tallaght Business Park Dublin 24IrelandPhone: +353 (14046444) Fax-no.:+353 (14519926)*****************************.com1.4. Emergency telephone number24 Hours Emergency Tel: +44 (0)1442 278497SECTION 2: Hazards identification2.1. Classification of the substance or mixtureClassification (CLP):Skin sensitizerCategory 1H317 May cause an allergic skin reaction.2.2. Label elements Label elements (CLP):Hazard pictogram:Signal word:WarningMSDS-No.: 175666 V004.3LOCTITE 362 60EN 5C 0.7MM S known as 60EN 362 5CPage 2 of 11Hazard statement:H317 May cause an allergic skin reaction.Precautionary statement: PreventionP261 Avoid breathing fume. P280 Wear protective gloves.Precautionary statement: ResponseP333+P313 If skin irritation or rash occurs: Get medical advice/attention.2.3. Other hazardsAvoid breathing fumes given out during soldering.After handling solder wash hands with soap and water before eating, drinking or smoking.Flux fumes may irritate the nose, throat and lungs and may after prolonged/repeated exposure give an allergic reaction (asthma). Regulations forbid the use of lead solder in any private or public drinking water supply system. Keep out of reach of children. Do not heat above 500 °C3.2. MixturesDeclaration of the ingredients according to CLP (EC) No 1272/2008:For full text of the H - statements and other abbreviations see section 16 "Other information". Substances without classification may have community workplace exposure limits available.4.1. Description of first aid measuresInhalation:Move to fresh air. If symptoms persist, seek medical advice.Skin contact:Rinse with running water and soap.Obtain medical attention if irritation persists.Eye contact:Flush eyes with plenty of water for at least 5 minutes. If irritation persists seek medical attention.Ingestion:Do not induce vomiting. Seek medical advice.4.2. Most important symptoms and effects, both acute and delayedFlux fumes may irritate the nose, throat and lungs and may after prolonged/repeated exposure give an allergic reaction (asthma).SKIN: Rash, Urticaria.MSDS-No.: 175666LOCTITE 362 60EN 5C 0.7MM S known as 60EN 362 5C Page 3 of 11 V004.34.3. Indication of any immediate medical attention and special treatment neededSee section: Description of first aid measures5.1. Extinguishing mediaSuitable extinguishing media:Carbon dioxide, foam, powderFine water sprayExtinguishing media which must not be used for safety reasons:Do not use water on fires where molten metal is present.5.2. Special hazards arising from the substance or mixtureHigh temperatures may produce heavy metal dust, fumes or vapours.The flux medium will give rise to irritating fumes.5.3. Advice for firefightersWear self-contained breathing apparatus.Additional information:The product itself does not burn. Any fire extinguishing action should be appropriate to the surroundings.6.1. Personal precautions, protective equipment and emergency proceduresWear protective equipment.6.2. Environmental precautionsDo not empty into drains / surface water / ground water.6.3. Methods and material for containment and cleaning upScrape up spilled material and place in a closed container for disposal.6.4. Reference to other sectionsSee advice in section 87.1. Precautions for safe handlingExtraction is necessary to remove fumes evolved during reflow.When using do not eat, drink or smoke.Wash hands before breaks and immediately after handling the product.Avoid breathing fumes given out during soldering.See advice in section 8Do not heat above 500 °CHygiene measures:Good industrial hygiene practices should be observed.Do not eat, drink or smoke while working.After handling solder wash hands with soap and water before eating, drinking or smoking.7.2. Conditions for safe storage, including any incompatibilitiesEnsure good ventilation/extraction.Store in a cool, dry place.7.3. Specific end use(s)Solder WireMSDS-No.: 175666LOCTITE 362 60EN 5C 0.7MM S known as 60EN 362 5C Page 4 of 11 V004.38.1. Control parametersOccupational Exposure LimitsValid forGreat BritainPredicted No-Effect Concentration (PNEC):MSDS-No.: 175666LOCTITE 362 60EN 5C 0.7MM S known as 60EN 362 5C Page 5 of 11 V004.3Derived No-Effect Level (DNEL):Biological Exposure Indices:8.2. Exposure controls:Engineering controls:Extraction is necessary to remove fumes evolved during reflow.Where reasonably practicable this should be achieved by the use of local exhaust ventilation and good general extraction.Ensure good ventilation/extraction.MSDS-No.: 175666LOCTITE 362 60EN 5C 0.7MM S known as 60EN 362 5C Page 6 of 11 V004.3Respiratory protection:In case of aerosol formation, we recommend wearing of appropriate respiratory protection equipment with ABEK P2 filter.This recommendation should be matched to local conditions.Ensure adequate ventilation.An approved mask or respirator fitted with an organic vapour cartridge should be worn if the product is used in a poorlyventilated areaHand protection:Chemical-resistant protective gloves (EN 374).Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374):nitrile rubber (NBR; >= 0.4 mm thickness)Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374):nitrile rubber (NBR; >= 0.4 mm thickness)This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g.temperature). If signs of wear and tear are noticed then the gloves should be replaced.Eye protection:Safety glasses with sideshields or chemical safety goggles should be worn if there is a risk of splashing.Skin protection:Wear suitable protective clothing.9.1. Information on basic physical and chemical propertiesAppearance solidgreyOdor NoneOdour threshold No data available / Not applicablepH Not applicableInitial boiling point Not determinedFlash point Not applicableDecomposition temperature No data available / Not applicableVapour pressure No data available / Not applicableDensity8,5 g/cm3(20 °C (68 °F))Bulk density No data available / Not applicableViscosity No data available / Not applicableViscosity (kinematic) No data available / Not applicableExplosive properties No data available / Not applicableSolubility (qualitative) InsolubleSolidification temperature No data available / Not applicableMelting point183,0 - 188,0 °C (361.4 - 370.4 °F)Flammability No data available / Not applicableAuto-ignition temperature No data available / Not applicableExplosive limits No data available / Not applicablePartition coefficient: n-octanol/water Not applicableEvaporation rate No data available / Not applicableVapor density No data available / Not applicableOxidising properties No data available / Not applicable9.2. Other informationNo data available / Not applicableMSDS-No.: 175666LOCTITE 362 60EN 5C 0.7MM S known as 60EN 362 5C Page 7 of 11 V004.310.1. ReactivitySolder alloy will react with concentrated nitric acid to produce toxic fumes of nitrogen oxides.Reacts with strong oxidants.10.2. Chemical stabilityStable under recommended storage conditions.10.3. Possibility of hazardous reactionsSee section reactivity10.4. Conditions to avoidNo decomposition if stored and applied as directed.10.5. Incompatible materialsSee section reactivity10.6. Hazardous decomposition productsThermal decomposition can lead to release of irritating gases and vapors.11.1. Information on toxicological effectsGeneral toxicological information:The mixture is classified based on the available hazard information for the ingredients as defined in the classification criteria for mixtures for each hazard class or differentiation in Annex I to Regulation 1272/2008/EC. Relevant available health/ecological information for the substances listed under Section 3 is provided in the following.Inhalative toxicity:Fumes evolved at soldering temperatures will irritate the nose, throat and lungs. Prolonged or repeated exposure to flux fumes may result in sensitisation in sensitive workers.Dermal toxicity:This product is considered to have low dermal toxicity.Skin irritation:Fumes emitted during soldering may irritate the skin.Eye irritation:Fumes emitted during soldering may irritate the eyes.Sensitizing:May cause an allergic skin reaction.Acute oral toxicity:Acute inhalative toxicity:MSDS-No.: 175666 V004.3LOCTITE 362 60EN 5C 0.7MM S known as 60EN 362 5CPage 8 of 11Skin corrosion/irritation:Serious eye damage/irritation:Germ cell mutagenicity:General ecological information:The mixture is classified based on the available hazard information for the ingredients as defined in the classification criteria for mixtures for each hazard class or differentiation in Annex I to Regulation 1272/2008/EC. Relevant available health/ecological information for the substances listed under Section 3 is provided in the following.12.1. ToxicityEcotoxicity:Do not empty into drains / surface water / ground water.12.2. Persistence and degradabilityPersistence and Biodegradability: The product is not biodegradable.12.3. Bioaccumulative potential / 12.4. Mobility in soilMobility:The product is insoluble and sinks in water.MSDS-No.: 175666 V004.3LOCTITE 362 60EN 5C 0.7MM S known as 60EN 362 5CPage 9 of 11Bioaccumulative potential: No data available.Bioaccumulative potential:Octanol/Water distribution coefficient: Not applicable12.5. Results of PBT and vPvB assessment12.6. Other adverse effectsNo data available.13.1. Waste treatment methods Product disposal:Wherever possible unwanted solder alloy should be recycled for recovery of metal. Otherwise dispose of in accordance with local and national regulations. Disposal of uncleaned packages: Dispose of as unused product.Waste code06 04 05 - wastes containing other heavy metals14.1.UN numberNot hazardous according to RID, ADR, ADN, IMDG, IATA-DGR.14.2.UN proper shipping nameNot hazardous according to RID, ADR, ADN, IMDG, IATA-DGR.14.3.Transport hazard class(es)Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR.14.4.Packaging groupNot hazardous according to RID, ADR, ADN, IMDG, IATA-DGR.14.5.Environmental hazardsNot hazardous according to RID, ADR, ADN, IMDG, IATA-DGR.14.6.Special precautions for userNot hazardous according to RID, ADR, ADN, IMDG, IATA-DGR.14.7.Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Codenot applicable15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture< 3 %VOC content(1999/13/EC)15.2. Chemical safety assessmentA chemical safety assessment has not been carried out.National regulations/information (Great Britain):Remarks The Health & Safety at Work Act 1974.The Control of Lead at Work Regulations. L132:Control of Lead at Work:Approved Code of Practice and Guidance.The Control of Substances Hazardous to Health Regulations. L5:GeneralApproved Code of Practice to the COSHH Regulations. HS(G)97:A Step by StepGuide to the COSHH Regulations. HS(G)193:COSHH essentials: Easy steps tocontrol chemicals.IND (G)248L:Solder fume and you. IND(G)249L:Controlling health risks fromrosin (colophony) based solder fluxes.Employees should be under medical surveillance if the risk assessment madeunder the Control of Lead at Work Regulations indicates they are likely to beexposed to significant concentrations of lead, or if an Employment MedicalAdvisor or appointed doctor so certifies.A woman employed on work which exposes her to lead should notify heremployer as soon as possible if she becomes pregnant. The Employment MedicalAdvisor / Appointed Doctor should be informed of the pregnancy.Under the Management of Health and Safety at Work Regulations, employers arerequired to assess the particular risks to health at work of pregnant workers andworkers who have recently given birth or who are breast feeding.The labelling of the product is indicated in Section 2. The full textof all abbreviations indicated by codes in this safety data sheet are as follows:H317 May cause an allergic skin reaction.Further information:This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our products from the point of view of safety requirements and is not intended to guarantee any particular properties.Label elements (DPD):Xi - IrritantRisk phrases:R43 May cause sensitisation by skin contact.Safety phrases:S23 Do not breathe fumes.S24 Avoid contact with skin.S37 Wear suitable gloves.Contains:RosinRelevant changes in this safety data sheet are indicated by vertical lines at the left margin in the body of this document. Corresponding text is displayed in a different color on shadowed fields.D622 500G REEL D622 500G REEL。

ug术语中英文对照

[售后服务客户关系]HPMLDL系列服务器

制程工艺 32nm
三级缓存 12MB
总线规格 QPI5.86GT/s
CPU 核心四核
CPU 线程八线程
数
主板
主板芯片组 Intel5500
扩展槽
4×PCI-E 插槽
内存
内存类型 DDR3
内存容量 6GB
内存描述 3×2GBPC3-10600RDDR31333MHzRegisteredDIMMs
质保时间 3年
质保备注 3年部件，3年人工，3年现场
客服电话 800-810-3888；400-610-3888
电话备注周一到周五：8:30-18:00（节假日休息）
详细内容
HP 服务器保修于指定日期开始和结束：保修开始日期可以由产品制造期间存储于产品中的日期、安装日期或者客户购买凭证上的日期来确定。不同产品的保修时间可能会有所差异。影响保修条款的因素包括销售产品的国家/地区，以及产品的类型。具体的保修期以用户手册及 HP 根据该产品型号、序列号的查询结果为准。
HPProLiantML350G6(63 8180-AA1)
参数规格
基本参数
产品类别塔式
产品结构 5U
处理器
CPU 类型 Intel 至强5600
CPU 型号 XeonE5606
CPU 频率 2.13GHz
标配 CPU 1颗
数量
最大 CPU 2颗
数量
制程工艺 32nm
三级缓存 8MB
总线规格 QPI4.8GT/s
（售后服务）HPMLDL 系列服务器
HP 服务器产品资料 hpML 系列服务器
HPProLiantML110G7( C8R00A)
参数规格
基本参数产品类型工作组级产品类别塔式产品结构 4U 处理器 CPU 类型奔腾双核 CPU 型号奔腾双核 G860 CPU 频率 3GHz 标配 CPU

常见中英文菜单翻译

汤soup羹soup高汤thin soup; light soup; clear soup; consommé清汤thin soup; light soup; clear soup; consommé浓汤thick soup; pottage/potage老汤soup stock肉汤broth骨头汤bone broth肉片汤soup with meat slices黄瓜肉片汤soupwith meat and cucumberslices肉片鱼羹slicedmeat with fish paste inbroth丸子汤soup withmeat balls; pork ballssoup氽丸子soup withmeat balls; pork ballssoup肉圆粉丝汤porkballs soup with beannoodles白肺汤pork lungsoup牛肉汤beef soup羊肉汤muttonsoup鸡汤chicken soup;soup with chicken鸡块汤soup withchicken slices; soup withsliced chicken;sliced chicken soup鸡丝汤soup withshredded chicken;shredded chicken soup草菇鸡片汤slicedchicken with mushroomsin soup鸡茸玉米汤cornsoup with mincedchicken鸡茸芦笋汤asparagus soup with mashed chicken鸡茸黄鱼羹yellow croaker potage with minced chicken鸡杂汤chicken giblets soup鸡什汤chicken giblets soup蔬菜鸡什汤chicken giblets soup with vegetables鸭汤duck soup火鸭芥菜汤sliced roasted duck with leaf mustered in soup芥菜鸭汤duck soup with pickled mustard leaves鸭掌汤duck web soup竹笋鸭掌汤duck’s feet with bamboo shoots in soup鸭肝汤duck liver soup冬菇鸭杂汤duck giblets soup with black mushrooms鸭骨菜汤duck bone soup with vegetables汤泡肫球gizzardballs in soup三鲜汤soup withfish, shrimps and porkballs红鱼汤fish soupwith tomato黄鱼羹yellowcroaker chowder鲫鱼汤soup withgold carp; gold carp soup鱼翅汤soup withshark’s fins鲍鱼汤soup withabalone; abalone soup鲍鱼鸡片汤abalone soup with slicedchicken鲍鱼芦笋汤abalone soup withasparagus干贝汤driedscallop soup; soup withdried scallops燕窝汤bird‘s nestsoup燕窝羹bird‘s nestsoup蛇羹snake soup;soup with snake酸辣汤sour andpepper hot soup豆腐汤bean－cudsoup蔬菜汤vegetablessoup榨菜汤hot pickledtuber mustard soup榨菜肉丝汤hotpickled tuber mustardsoup with shredded pork榨菜粉丝汤hotpickled tuber mustardsoup with bean noodles什锦瓜丁汤assorted meat soup withdiced white gourd鸡蛋羹steamedegg custard鸡蛋汤eggdropsoup; egg soup木须汤eggdropsoup; egg soup蛋花汤eggdropsoup; egg soup蕃茄鸡蛋汤eggsoup with tomatoes锅巴口蘑汤mushroom soup withfried rice crust白豆汤white bean soup玉米羹sweet corn soup面食cooked wheaten food面食cooked wheaten food; food made of flour馒头steamed bread; steamed bun白面馒头steamed bread; steamed bun一屉馒头 a trayful of steamed bread; a trayful of steamed buns馒子steamed bread; steamed bun馍馍steamed bread; steamed bun白面馒steamed bread; steamed bun花卷steamed twisted roll; steamed roll蒸饼steamed cake发面饼leavened pancake烙饼unleavened pancake; flapjack家常饼home－ｓｔｙｌｅpancake薄饼thin pancake荷叶饼lotus－leaf－like pancake; thinpancake锅饼thick pancake饼卷pancake roll葱花饼greenChinese onion pancake;green onion pancake炒饼fried shreddedpancake肉饼fried meat pie;meat pie馅饼fried meat pie;meat pie猪肉馅饼friedpork pie; pork pie三鲜馅饼fried piewith shredded sea foods烧饼baked sesame－seed cake芝麻烧饼bakedsesame－seed cake火烧bakedwheaten cake糖火烧bakedsweeten wheaten cake蜂糕steamedsponge cake米糕steamed ricecake; rice budding年糕New Yearcake made of glutinousrice flour凉糕steamed ricecake served cold insummer丝糕steamed corncake窝头steamed cornbread玉米饼子cornpancake煎饼thin pancakemade of millet flour;millet pancake粽子pyramid－shaped dumpling madeof glutinous rice wrappedinbamboo or reedleaves馕crusty pancake面条noodles切面noodles挂面packaged noodles拉面hand－pulled noodles抻面hand－pulled noodles方便面instant noodles即食面instant noodles通心面macaroni通心粉macaroni细通心粉spaghetti意大利式细面条spaghetti细面条spaghetti米粉条rice －flour noodles面汤water in which noodles have been boiled捞面noodles taken out of the boiling water with a strainer肉丝面noodles with shredded meat肉丝拌面noodles with shredded pork炸酱面noodles withchopped meat infried bean sauce;noodles withsoya bean paste打卤面noodles with meatslices in thickgravy;noodlesserved with thickgravy烩面stewednoodles鸡丝烩面stewed noodleswith chickenshreds凉拌面coldnoodles withsauce凉面coldnoodles withchicken shreds鸡丝凉面cold noodles withchicken shreds芝麻酱面cold noodles withsesame paste麻酱面coldnoodles withsesame paste寿面birthday noodlesa.汤面noodles soup汤面noodles soup;noodles in soup肉丝汤面noodles soup withshredded meat鸡丝汤面noodles soup withshredded chicken三鲜汤面noodles soup withshredded seafoodsb.炒面friednoodles炒面friednoodles; ChowMien肉丝炒面fried noodles withshredded meat牛肉炒面fried noodles withbeef牛肉蔬菜炒面fried noodleswith beef andvegetables鸡丝炒面fried noodles with shredded chicken虾炒面fried noodles with shrimps海鲜炒面fried noodles with sea foods海鲜蔬菜炒面fried noodles with sea foods and vegetables蔬菜炒面fried noodles with vegetables包子steamed bun with stuffing包子steamed stuffed bun; steamed bun with stuffing肉包子steamed bun with meat stuffing; steamed bun with minced pork stuffing肉包steamed bun with meat stuffing; steamed bun with minced pork stuffing猪肉包子steamed bun with pork stuffing三鲜包子steamed bunstuffed withshredded seafoods菜包子steamed bun withvegetable stuffing;steamedvegetable stuffedbun素包子steamed bun withvegetable stuffing;steamedvegetable stuffedbun豆沙包steamed bun withsweetened beanpaste;steamed bunstuffed withmashed red bean蒸包steamed bun withstuffing猪肉蒸包steamed bun withpork stuffing三鲜蒸包steamed bunstuffed withshredded seafoods小笼蒸包steamed stuffedbun by smallbamboo foodsteamer小笼包steamed stuffedbun by smallbamboo foodsteamer蒸饺steameddumpling猪肉蒸饺steamed porkdumpling三鲜蒸饺steameddumpling stuffedshredded seafoods锅贴slightly frieddumpling猪肉锅贴slightly fried porkdumpling三鲜锅贴slightly frieddumpling withshredded seafoods肉卷grilledbun with mincedpork stuffing饺子boileddumpling饺子馅stuffing for dumpling; filling for dumpling饺子皮dumpling wrapper饺子汤water in which dumplings have been boiled速冻饺子instant frozen dumpling猪肉饺子boiled pork dumpling三鲜饺子boiled dumpling with shredded sea foods水饺boiled dumpling手工水饺hand－made boiled dumpling机制水饺machine－made boiled dumpling猪肉水饺boiled pork dumpling韭菜水饺boiled dumpling with Chinese chive三鲜水饺boiled dumpling with shredded sea foods红油水饺boiled dumpling with chili/chili oil馄饨wonton; ravioli soup面球dumpling汤包steamed dumpling filled with minced meat and gravy烧卖steamed dumpling with the dough gathered at the top。

奥太350器件表

NBC-350新奥汰器件表 NBC-350新奥汰器件表
名称小硅桥小硅桥硅桥电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容电容型号 W10/1A W10/1A 1A/W10 100n 100n 225聚酯 100n 334聚酯 100n 100n 100n 100n 100n 100n 100n 105J63聚酯 100n 100n 100n 100n 100n 100n 100n 100n 100n 100n 100n 100n 100n 100n 100n 100n 100n 100n 100n 100n 100n 471 100n 100n 100n 334 100n 100n 105聚酯符号 B1 B2 B3 C1 C10 C11 C12 C13 C14 C15 C16 C17 C18 C19 C2 C20 C21 C22 C23 C24 C25 C26 C27 C28 C29 C3 C3 C30 C31 C32 C33 C34 C35 C36 C37 C38 C39 C4 C40 C41 C42 C43 C44 C45 C46
2K 20K 5.1K 20K 20K 2K 3K 10K 10K 324 4013 4514 324 324 3023光耦 HCNR200 HCNR200 P521 P521 P521 4053 324 324 324 P521 358 4053 358 324 LM393P 3023 P521 P521 NE555P 4148 4148 4148 4148 4148 4148 1N4007 4148 4148 4148 41电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻电阻

S350大版说明书

1
S350系列
第一章概况
第一章概况
1.1 变频器的综合技术特性
●输入输出特性 ◆输入电压范围：380V/220V±15% ◆输入频率范围：47~63Hz ◆输出电压范围：0~额定输入电压 ◆输出频率范围：0~600Hz ●外围接口特性 ◆可编程数字输入：6 路输入 ◆可编程模拟量输入：VI：0~10V输入，CI：0~20mA 输入 ◆开路集电极输出：1 路输出 ◆继电器输出：2 路输出（7.5kw以下 1 路输出，可扩展） ◆模拟量输出：2 路输出 FM 可选 0/4~20mA 或 0~10V，AM 0~10V（7.5kw以下只有FM、AM需带扩展卡） ◆可编程高速脉冲HM1输入：1路输入0~50kHz ●技术性能特性 ◆控制方式：无 PG 矢量控制、V/F 控制、转矩控制 ◆过载能力：150% 额定电流 60s；180% 额定电流10s ◆启动转矩：无 PG 矢量控制（SVC）：0.5Hz 150% ◆调速比：无 PG 矢量控制：1：100 ◆速度控制精度：无 PG 矢量控制：±0.5%最高速度 ◆载波频率：1.0k~15.0kHz ●功能特性 ◆频率设定方式：数字设定、模拟量设定、串行通讯设定、多段速、PID设定等。 ◆PID 控制功能 ◆多段速控制功能：16 段速控制 ◆摆频控制功能 ◆瞬时停电不停机功能 ◆自动电压调整功能：当电网电压变化时，能自动保持输出电压恒定 ◆提供多达 25 种故障保护功能：过流、过压、欠压、过温、缺相、过载等保护功能。
功能参数表参数说明
故障检查与排除保养和维护通讯协议
技术参数地址
S350系列
序言
序言
感谢您采用广州三晶电气有限公司的 S350 系列高性能矢量型交流变频器。本手册为使用者提供了安装、参数设定、故障诊断、排除及日常维护本变频器的相关注意事项及指导。为了确保能够正确地安装及操作本变频器，请在装机之前详细阅读本使用手册，并妥善保存及交由该机器的使用者。如对本变频器的使用存在疑难或有特殊要求，请随时联系本公司所在地区办事处或代理商，也可直接与本公司售后服务中心联系。本手册适用于本公司生产的系列产品如有变动，恕不另行通知。

EP3C16Q240C8中文资料(Altera)中文数据手册「EasyDatasheet - 矽搜」

1–5
电气特性
直流特性
本节列出I / O漏电流,引脚电容,片上端接（OCT）耐受性,并为Cyclone III器件总线防护持规范.
电源电流
待机电流是流经器件电流在该装置没有配置输入或输出翻转,在该装置没有活动电流 .使用基于Excel早期功耗估算（EPE）来获取电源电流估计为您设计,因为这些电流变化在很大程度上与使用资源.
图1-1
示出方法来确定过冲持续时间.
图1-1,
Unit % % % % % % % % % % % % % %
超调
图 1-1. Cyclone III器件超调时间
4.2 V 4.1 V 3.3 V
T T
芯片中文手册,看全文,戳
1–4
第 1章： Cyclone III器件数据表
电气特性
电源电压为输出缓冲器,3.3-V
手术
—
1.15 1.2 1.25
V
—
3.135 3.3 3.465 V
电源电压为输出缓冲器,3.0-V
手术
—
2.85
3
3.15
V
VCCIO (3), (4)
电源电压为输出缓冲器,2.5-V
手术
电源电压为输出缓冲器,1.8-V
手术
电源电压为输出缓冲器,1.5-V
手术
—
2.375 2.5 2.625 V
TSTG TJ
储存温度工作结温
注意表 1-1：
（1）电源电压规格适用于电压器件引脚采取相对于地面,而不是在读电源.
(1)
Min –0.5 –0.5 –0.5 –0.5 –0.5 –25 —
— –65 –40
最大允许过冲或冲电压

MAX33250E和MAX33251E RS-232 串行转换接收器说明书

MAX33251EELC+General DescriptionThe MAX33250E and MAX33251E are isolated2Tx/2Rx and1Tx/1Rx RS-232transceivers,respectively,with a galvanic isolation of600V RMS(60sec)between the logic UART side and field side.The isolation barrier protects the logic UART side from electrical transient strikes from the field side.It also breaks ground loops and large dif-ferences in ground potentials between the two sides that can potentially corrupt the receiving and sending of data. The MAX33250E and MAX33251E conform to the EIA/ TIA-232E standard and operate at data rates up to1Mbps. The isolated RS-232transceivers have integrated charge pumps and an inverter to eliminate the need for a high positive and negative voltage supply.Both devices also have integrated charge pump and inverter capacitors to help further reduce PCB space.The supply pin V CCA on the UART logic side operates from a dual voltage sup-ply from+3V to+5.5V.V CCB also operates from+3V to +5.5V,simplifying power requirements and enabling lev-el translation between the two voltages.The transmitters and receivers on the field side of these devices are rated for±15kV of ESD HBM protection,suitable for applications where RS-232 cables are frequently worked on.Both are available in a12-pin,6mm x6mm LGA package and operate over the -40ºC to +85ºC temperature range.Applications●Diagnostics Equipment●POS Systems●Industrial Equipment●GPS Equipment●Communication Systems●Medical Equipment Benefits and Features●High Integration Saves Space and Simplifies Designs•Integrated Charge Pumps and Inverter Eliminates Extra Power Supplies•Four Internal Capacitors Saves PCB Space•Integrated Isolator Saves Up to 63% Versus a Discrete Solution●Integrated Protection for Robust Communications•600V RMS Withstand Isolation Voltage for 60 Seconds (V ISO)•200V RMS Working Voltage for >50 years (V IOWM)•Integrated ±15kV ESD Human Body Model (HBM) Ordering Information appears at end of data sheet.Click here for production status of specific part numbers.MAX33250E/ MAX33251E 600V Isolated 2Tx/2Rx and 1Tx/1Rx RS-232Transceiver with ±15kV ESDand Integrated CapacitorsEVALUATION KIT AVAILABLE19-100400, Rev 1; 11/18Absolute Maximum RatingsV CCA to GNDA.........................................................-0.3V to +6V V CCB to GNDB.........................................................-0.3V to +6V T_IN to GNDA..........................................................-0.3V to +6V T_OUT to GNDB...............................................................±13.2V R_IN to GNDB......................................................................±25V R_OUT to GNDA......................................................-0.3V to +6V Short-Circuit Duration (T_OUT to GNDB)..................Continuous Short-Circuit Duration (R_OUT to GNDA)..................ContinuousSide A (V CCA , T1IN, T2IN, R1OUT, R2OUT) to GNDA ESD±2kV Side B (V CCB ) to GNDB ESD...............................................±2kV Side B (T1OUT, T2OUT, R1IN, R2IN) to GNDB ESD HBM±15kV Continuous Power Dissipation (Single Layer Board)(T A =+70°C,derate 10mW/°C above +70°C.)...........................510mW Continuous Power Dissipation (Multilayer Board)(T A =+70°C,derate 10mW/°C above +70°C.)...........................700mW Operating Temperature Range.............................-40°C to +85°CStresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.Package InformationLGA-12For the latest package outline information and land patterns (footprints), go to /packages .Note that a “+”, “#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status.Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer board. For detailed information on package thermal considerations, refer to /thermal-tutorial .MAX33250E/MAX33251E600V Isolated 2Tx/2Rx and 1Tx/1Rx RS-232Transceiver with ±15kV ESD and Integrated CapacitorsElectrical Characteristics(V CCA -V GNDA =3.0V to 5.5V,V CCB -V GNDB =3.0V to 5.5V,T A =T MIN to T MAX ,unless otherwise noted.Typical values are at V CCA -V GNDA =3.3V,V CCB -V GNDB =3.3V,V GNDA =V GNDB ,and T A =+25°C.(Note 1),Limits are 100%tested at T A =+25°C.Limits over the operating temperature range and relevant supply voltage range are guaranteed by design and characterization.Specifications marked "GBD" are guaranteed by design and not production tested.)PARAMETER SYMBOLCONDITIONSMINTYPMAXUNITSPOWER Supply VoltageV CCA , V CCB3.05.5VSupply CurrentI CCAV CCA = 5V, R_IN and T_IN idle 12mA V CCA = 3.3V, R_IN and T_IN idle 10I CCBV CCB = 5V, R_IN and T_IN idle, no load 12V CCB = 3.3V, R_IN and T_IN idle, no load10Undervoltage-Lockout ThresholdV UVLO V CCA - V GNDA (Note 2) 2.0V Undervoltage-Lockout HysteresisV UVLOHYSV CCA - V GNDA (Note 2)0.1V INPUT INTERFACE (T_IN, R_IN)Input Low VoltageV ILT_IN relative to GNDA0.8VR_IN relative to GNDB, T A = 25ºC,V CC = 3.3V0.6R_IN relative to GNDB, T A = 25ºC,V CC = 5V0.8Input High VoltageV IHT_IN relative to GNDA0.7 x V CCA VR_IN relative to GNDB, V CCB = 3.3V and 5V, T A = 25°C 2.4Transmitter Input Hysteresis (T_IN)0.5V Receiver Input Hysteresis (R_IN)0.5V Transmitter Input Leakage(T_IN)±1μA Input Resistance (R_IN)T A = 25ºC357kΩRECEIVER OUTPUT INTERFACE (R_OUT)Output Low Voltage V OL R_OUT relative to GNDA,sink current = 4mA 0.8V Output High Voltage V OHR_OUT relative to GNDA,source current = 4mAV CCA -0.4V Output Short-Circuit Current±110mATRANSMITTER OUTPUT (T_OUT)Output Voltage SwingT_OUT loaded with 3kΩ to GNDB±5VMAX33250E/MAX33251E600V Isolated 2Tx/2Rx and 1Tx/1Rx RS-232Transceiver with ±15kV ESD and Integrated CapacitorsElectrical Characteristics (continued)(V CCA -V GNDA =3.0V to 5.5V,V CCB -V GNDB =3.0V to 5.5V,T A =T MIN to T MAX ,unless otherwise noted.Typical values are at V CCA -V GNDA =3.3V,V CCB -V GNDB =3.3V,V GNDA =V GNDB ,and T A =+25°C.(Note 1),Limits are 100%tested at T A =+25°C.Limits over the operating temperature range and relevant supply voltage range are guaranteed by design and characterization.Specifications marked "GBD" are guaranteed by design and not production tested.)PARAMETER SYMBOLCONDITIONSMIN TYP MAXUNITS Output Resistance V CCB = 0V,transmitters = ±2V30010MΩOutput Short-Circuit Current±70mA Output Leakage CurrentV CCB = 0V, V OUT =±12V±25μAESD AND ISOLATION PROTECTIONESD for R_IN, T_OUTIEC 61000-4-2 Air Discharge±12kVIEC 61000-4-2 Contact Discharge ±6ESD Human Body Model JEDEC JS-001-2014±15Isolation Voltage V ISO t = 60s (Note 3)600V RMS Working Isolation VoltageV IOWM> 50 years (Note 3)200V RMS TIMING CHARACTERISTICS Maximum Data Rate V CCB = 5V, R L = 3kΩ, C L = 1000pF 1000kbps Receiver Propagation Delayt PHL , t PLH R_IN to R_OUT, C L = 150pF0.15μs Transmitter Skew | t PHL - t PLH |(Note 4)35ns Receiver Skew | t PHL - t PLH |60ns Transition-Region Slew RateV CCA = V CCB = 3.3V, T A = +25C, R L =3k to 7k, C L = 150pF to 1000pF,measured from +3V to -3V or -3V to +3V24150V/μsNote 1:All units are production tested at T A =25°C.Specifications over temperature are guaranteed by design.All voltages of side Aare referenced to GNDA. All voltages of side B are referenced to GNDB.Note 2:The undervoltage lockout threshold and hysteresis guarantee that the outputs are in a known state when the supply voltagedips.Note 3:The isolation is guaranteed by design and not production tested.Note 4:Transmitter skew is measured at the transmitter zero cross points.MAX33250E/MAX33251E600V Isolated 2Tx/2Rx and 1Tx/1Rx RS-232Transceiver with ±15kV ESD and Integrated CapacitorsTypical Operating Characteristics (V DD= 5V, V L= 3.3V, R L= 60Ω, C L= 15pF, T A= +25°C, unless otherwise noted.)MAX33250E/MAX33251E600V Isolated 2Tx/2Rx and 1Tx/1Rx RS-232Transceiver with ±15kV ESDand Integrated CapacitorsTypical Operating Characteristics (continued) (V DD= 5V, V L= 3.3V, R L= 60Ω, C L= 15pF, T A= +25°C, unless otherwise noted.)MAX33250E/MAX33251E600V Isolated 2Tx/2Rx and 1Tx/1Rx RS-232Transceiver with ±15kV ESDand Integrated CapacitorsMAX33250E/MAX33251E600V Isolated 2Tx/2Rx and 1Tx/1Rx RS-232Transceiver with ±15kV ESDand Integrated Capacitors Pin ConfigurationsPin DescriptionPINNAME FUNCTIONMAX33250EMAX33251E11V CCA Supply Voltage of Logic Side A. Bypass V CCA with a 0.1μF ceramic capacitor to GNDA 22T1IN TTL/CMOS Transmitter Input 13---T2IN TTL/CMOS Transmitter Input 244R1OUT TTL/CMOS Receiver Output 15---R2OUT TTL/CMOS Receiver Output 266GNDA Ground for Logic Side A 77GNDB Ground for Field Side B 8---R2IN RS-232 Receiver Input 299R1IN RS-232 Receiver Input 110---T2OUT RS-232 Transmitter Output 21111T1OUT RS-232 Transmitter Output 11212V CCBSupply Voltage of Logic Side B. Bypass V CCB with a 0.1μF ceramic capacitor to GNDBMAX33250E/MAX33251E600V Isolated 2Tx/2Rx and 1Tx/1Rx RS-232Transceiver with ±15kV ESD and Integrated CapacitorsMAX33250E/MAX33251E600V Isolated 2Tx/2Rx and 1Tx/1Rx RS-232Transceiver with ±15kV ESDand Integrated Capacitors Detailed DescriptionThe MAX33250E and MAX33251E are1Mbps,600V RMS isolated RS-232transceivers.The MAX33250E has2 transmitters and2receivers(2Tx/2Rx),and the MAX33251E has1transmitter and1receiver(1Tx/1Rx).The isolation is provided by Maxim’s proprietary insulation material that can withstand600V RMS for60seconds.The MAX33250E and MAX33251E conform to the EIA/TIA-232standard and operates at data rates up to1Mbps over the temperature range of -40ºC to 85ºC.Digital IsolationThe MAX33250E and MAX33251E provide galvanic isolation and protection for digital signals from the local microcontroller’s logic UART port(primary side)to the field lines(secondary side).A capacitive design is utilized where the insulation material for the isolation barrier is rated for600V RMS withstand voltage(V ISO)for60seconds.The same material can also be exposed to a differential of200V RMS of working voltage(V IOWM)for more than50years,providing longevity for many different types of end equipment.The isolation barrier also breaks ground loops and level translation for two different systems where it could potentially create inadvertent or misinterpret data signals.Dual Charge Pump Voltage Converter and InverterBoth parts have internal RS-232power supplies that consist of a regulated dual charge pump that provides output voltages of+5.5V(doubling charge pump)and-5.5V(inverting charge pump),over the+3.0V to+5.5V range.Each charge pump is internally connected to a pair of flying capacitors and a pair of reservoir capacitors to generate the internal V+ and V- supplies, as shown in Typical Application Diagram.Startup and Undervoltage LockoutThe V CCA and V CCB supplies are both internally monitored for undervoltage conditions.Undervoltage events can occur during power-up,power-down,or during normal operation due to a dip in either power supply line.When an undervoltage event is detected on either of the supplies,all outputs on both sides are automatically controlled,regardless of the status of the inputs.Table 1. Output Control Truth TableINPUTS V CCA V CCB RxOUT TxOUT RxIN = 1Undervoltage Powered High---RxIN = 0Undervoltage Powered Follows V CCA---TxIN = 1Undervoltage Powered—LowTxIN = 0Undervoltage Powered—LowRxIN = 1Powered Undervoltage High---RxIN = 0Powered Undervoltage High---TxIN = 1Powered Undervoltage—*LowTxIN = 0Powered Undervoltage—*Low*TxOUT will be out of compliance with the RS-232 specification as V CCB falls below 2.9V.Transceiver with ±15kV ESDand Integrated CapacitorsRS-232 TransmittersThe transmitters are inverting level translators that convert CMOS-logic levels from the UART or equivalent output port to+5V EIA/TIA-232levels.The two devices guarantee1Mbps with worst-case loads of3kΩin parallel with1000pF, providing compatibility with PC-to-PC communication software.Transmitters can be paralleled to drive multiple receivers. RS-232 ReceiversThe receivers convert RS-232signals to CMOS-logic output levels to the UART or equivalent input port.The devices feature inverting outputs that always remain active.Power Supply DecouplingTo reduce ripple and the chance of introducing data errors,bypass V CCA and V CCB with0.1μF ceramic capacitors to GNDA and GNDB, respectively. Place the bypass capacitors as close to the power-supply input pins as possible.Insulation and Safety CharacteristicsPARAMETERSYMBOL CONDITIONSVALUE UNIT IEC INSULATION AND SAFETY RELATED FOR SPECIFICATIONSExternal Tracking (Creepage)CPG IEC 60664-1 4.4mm External Air Gap (Clearance)CLRIEC 60664-1 4.4mm Minimum Internal Gap Insulation Thickness 0.0026mm Tracking Resistance(Comparative Tracking Index)CTI IEC 112/VDE 030 Part 1175V Insulation Resistance Across Barrier R ISO 1GΩCapacitance Across Isolation BarrierC IOf = 1MHz12pFVDE IEC INSULATION CHARACTERISTICS Surge Isolation VoltageV IOSM IEC 60747-17,section 5.3.1.6and 5.4.6for basic insulation1kV PEAK Repetitive Peak Isolation Voltage V IORM IEC 60747-17, section 5.3.1.3282kV PEAK Rated Transient Isolation Voltage V IOTM IEC 60747-17, section 5.3.1.4850kV PEAK Safety Limiting Temperature T S IEC 60747-17, section 7.2.1150°C Safety Limiting SideAPowerDissipation P SAIEC 60747-17, section 7.2.10.75WSafety Limiting Side B PowerDissipationP SB IEC 60747-17, section 7.2.10.75W Apparent Charge Method q pdIEC 60747-17, section 7.4 method a and b 5pC Overvoltage Category IEC 60664-1, single or three phase 50V DC or AC I,II —Overvoltage Category IEC 60664-1,single or three phase 100V DC or AC I —Climatic Category 40/125/21—Pollution DegreeDIN VDE 01102—Transceiver with ±15kV ESD and Integrated CapacitorsTransceiver with ±15kV ESDand Integrated Capacitors Typical Application CircuitOrdering InformationPART NUMBER TEMPERATURERANGE CHANNEL-CONFIGURATION DATA RATE PIN-PACKAGE MAX33250EELC+-40°C to +85°C 2 Transmitters, 2 Receivers 1Mbps 12 (6mm x 6mm) LGA MAX33251EELC+-40°C to +85°C1 Transmitter, 1 Receiver1Mbps12 (6mm x 6mm) LGA+Denotes a lead(Pb)-free/RoHS-compliant package.T = Tape-and-reel.Transceiver with ±15kV ESD and Integrated CapacitorsRevision HistoryREVISION NUMBERREVISION DATE DESCRIPTIONPAGES CHANGED09/18Initial release—111/18Updated Ordering Information13For pricing, delivery, and ordering information, please visit Maxim Integrated’s online storefront at https:///en/storefront/storefront.html.Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patentlicenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits) shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.Transceiver with ±15kV ESD and Integrated CapacitorsMAX33251EELC+。

NETGEAR S350 Gigabit Smart Switch Series数据表说明书

As a leading provider of network equipment for SMBs, NETGEAR® understands the importance of reliable and high performance networks that are SMB budget aware. With the growth of virtualization, cloud-based services and applications like VoIP, video streaming and IP surveillance, SMB networks need to extend beyond simple reliability to performance and security. The NETGEAR S350 Gigabit Smart Switch series is tailored to these essential network needs of your business; delivering unprecedented non-blocking Gigabit bandwidth and solid network security at an affordable cost.The NETGEAR Smart S350 series consists of five switch models, including 8-, 24- and 48-port Gigabit Ethernet switchesand 8-, and 24-port Gigabit EthernetPoE+ switches with 2 or 4 SFP ports forfiber uplinks, offering powerful Layer 2features, enhanced performance and easeof use. They are purposely designed forconverged networks where voice, video,data are all carried on a single networkplatform. Advanced features such as L2/L3/L4 Access Control Lists (ACLs), Qualityof Service (QoS), Link Aggregation ControlProtocol (LACP) and Spanning TreeProtocol (STP) will ensure a high-speedand highly secured network environmentfor your business.The 8-port S350 series switch models arein small “desktop” form factors, which willnot take much space to place. The 24- and48-port models are also rack-mountable.All models include Kensington lock slotto physically secure your switch in openspace. The fan-less 8-port models and 24-port non-PoE model will operate silently,ideal for the noise-sensitive environment.The 24-port PoE+ model and 48-portmodel also work under 33dBA acousticlevel. All NETGEAR S350 Series switchessupport IEEE 802.3az Energy EfficientEthernet mode, caring power saving foryour business. NETGEAR S350 Series iscovered by a 5-year limited HardwareWarranty* and extendable support**,offering a worry-free user’s experience atvery affordable total cost of ownership.HighlightsFlexible and cost-effective solution for SMB data, voice and video converged network• 8/24/48 Gigabit 10/100/1000BASE-T RJ-45 ports• 55W (GS310TP) or 190W (GS324TP) PoE budget across 8 or 24 Gigabit PoE+ ports (802.3at)• Dedicated SFP fiber ports: 2 on GS310TP/GS324T/GS324TP and 4 on GS348T• Non-blocking switching with 16Gbps to104Gbps line rate fabric• Fan-less design on GS308T/GS310TP/GS324T; GS324TP and GS348T hasmax acoustic noise level at 32.8dBand 26dB respectively under 25°C(77°F) ambientPowerful Connectivity and SecurityFeatures• Advanced VLAN support for betternetwork segmentation• L2/L3/L4 Access control lists (ACLs) forgranular network access controlincluding 802.1x port authenticationIN UNMANAGED & SMART SWITCHESNETGEAR quality and reliability • Industry-leading 5-year Limited Hardware Warranty*• Minimal down-time with Next- BusinessDay Replacement Warranty • Get 90-days Free Advanced Technical Support with device registrationPowerful Connectivity and Security Features (continued)• QoS (Quality of Service) for traffic prioritization including port-based, 802.1p and L2/L3/L4 DSCP-based • Auto “denial-of-service” (DoS)prevention• IGMP Snooping and Querier for multicast optimization• Rate limiting and priority queuing for better bandwidth allocation• Port mirroring for network monitoring • Energy Efficient Ethernet (IEEE 802.3az) for maximum power savings • Cable test to troubleshoot connection issues (except for GS324T/GS324TP)• Easy-to-use Web browser-basedmanagement GUI available in English, German and Japanese• SNMP v1, v2c, v3 and RMON remote monitoringSmart IT, not Big IT • Easy to manage via web-Based Management GUI or Smart Control Center (Windows PC required) formulti-switch deployment• Smart Control Center, a powerful tool for multi-switch discovery,deployment, monitoring and firmware upgrade • Network Management System (NMS300), allowing all NETGEARbusiness products to be deployed andmanaged through this single interface• Dual firmware images, improving reliability and uptime to your networkHighlightsHardware at a GlanceSoftware at a GlancePerformance at a GlanceHardware FeaturesDedicated SFP Fiber Uplinks Dedicated SFP ports provides fiber uplinks without sacrificing any downlink Gigabit port. Up to 4 SFP ports provide not only redundant uplinks, but can also build dual redundancy by a trunked uplink with link aggregation and failover, the dual- redundancy, a powerful design for the network virtualizationPoE+ Support on all ports (GS310TP and GS324TP)Flexible to plug-in or change into high-power PD devices on any port without worrying which one port to plug in and whether it will be running out of PoE+ ports.Low Acoustics Fan-less design on GS308T/GS310TP/GS324T, and maximum acoustic noise level at 32.8dB for GS324TP and 26dB for GS348T respectively at 25°C (77°F) ambient for quieter office environmentEnergy Efficient Ethernet (IEEE 802.3az)Maximum power reduction for ongoing operation cost savings. Software FeaturesAdvanced per port PoE controls Remote power management of PoE connected devices including operation sched-uling (e.g. Wireless APs, IP security cameras, secure access door locks, IoT devices…)ACL filtering to permit or deny traffic based on Provide granular network access control including L2/L3/L4 access control lists (ACLs).Robust security features:• 802.1x authentication (EAP)• Port-based security by locked MAC • DHCP Snooping Build a secured, converged network with all types of traffic by preventing external attacks and blocking malware, while allowing secure access for authorized users with RADIUS 802.1x port authentication.Comprehensive QoS features:• Port-based or 802.1p-based prioritization • Layer 3-based (DSCP) prioritization• Port-based ingress and egress rate limiting Advanced controls for optimized network performance and better delivery of mission-critical traffic such as voice and video.Auto-VoIP, Auto-Voice VLAN, and Auto-Video VLAN Automatic Voice over IP prioritization (Auto-VoIP) simplifies most complexmulti-vendor IP telephone deployments either based on protocols (SIP) or on OUI bytes (default database and user-based OUIs) in the phone source MAC address, providing the best class of service to VoIP streams (both data and signaling) over other ordinary traffic by classifying traffic, and enabling correct egress queue configuration. Similarly, Auto-Video VLAN enables IGMP snooping to minimize broadcast streams.IGMP Snooping Facilitate fast receiver joins and leaves for multicast streams. Save cost and improve network efficiency by ensuring multicast traffic only reaches designated receivers without the need of an extra multicast routerProtected Ports Ensure no exchange of unicast, broadcast, or multicast traffic between the protected ports on the switch, thereby improving the security of your converged network. This allows your sensitive phone conversations to stay private and your surveillance video clips can be forwarded to their designated storage device without leakage or alteration.DHCP Snooping Ensure IP address allocation integrity by only allowing DHCP messages from trusted DHCP servers and dropping malformed DHCP messages with a port or MAC address mismatch.Dynamic VLAN Assignment (RADIUS)IP phones and PCs can authenticate on the same port but under different VLAN assignment policies. Users are free to move around and enjoy the same level of network access regardless of their physical location on the network.Dual Firmware Images Dual firmware images for transparent firmware updates with minimum service interruption.Features and BenefitsWhy is the NETGEAR S350 Series Gigabit Ethernet Smart Switch the right choice for SMBs?As a leading provider of network equipment for SMBs, NETGEAR® understands the importance of reliable and high performance networks that are SMB budget aware. With the growth of virtualization, cloud-based services and applications like VoIP, video streaming and IP surveillance, SMB networks need to extend beyond simple reliability to performance and security. The NETGEAR S350 Gigabit Smart Switch series is tailored to these essential network needs of your business; delivering unprecedented non-blocking Gigabit bandwidth and solid network security at an affordable cost.What you can expect from NETGEAR S350 Series Switche s:• One-wire installation with 8, 12 or 24 Gigabit ports with PoE+ options (55W or 190W PoE total budget), and 2 or 4 SFP ports options provide not only redundant uplinks, but also build dual redundancy by a trunked uplink with link aggregation and failoverredundancy.• Quiet and Cost-effective Smart Layer2 switches with essential business class network needs, ideal for voice, video and dataconvergence in office application• Smart switch features include VLAN, ACL, QoS, IGMP Snooping, LACP Link aggregation, STP and SNMP for enhanced securityand reliability• Easy-to-use Web browser-based management GUI and full control through NETGEAR Smart Control Center, no need for an IT expert • 5-year hardware warranty with Next Business Day replacement, 90-day free technical supportExample ApplicationNetwork ConvergenceAccess PointsSecurity CamerasGS310TPInternetWiFi Router VoIP PhonesPCsFile Servers GS348TWireless Notebook PCsWiFi RouterMobile DevicesReadyNASLaptop ComputersT echnical Specifications GS308T GS310TP GS324T GS324TP GS348T 10M/100M/1G RJ-45 copper ports88242448PoE / PoE+ ports-8 PoE+ (55WPoE budget)-24 PoE+ (190WPoE budget)-1G SFP (fiber) ports- 2 (dedicated) 2 (dedicated) 2 (dedicated) 4 (dedicated) Performance SpecificationCPU500MHz128MB RAM32MB FLASH500MHz128MB RAM32MB FLASH800MHz512MB RAM128MB FLASH800MHz512MB RAM128MB FLASH400MHz512MB RAM128MB FLASHPacket buffer memory(Dynamically shared across only used ports)512KB512KB512KB512KB 1.5MB Forwarding modes Store-and-forwardBandwidth16 Gbps20 Gbps52 Gbps52 Gbps104 Gpbs Priority queues88448 Priority queuing Weighted Round Robin (WRR) and Strict PriorityMAC address database size(48-bit MAC addresses)8K8K16K16K16K Multicast groups256256512512512 Number of VLANs6464646464 Number of DHCP snooping bindings8K8K8K8K8K Access Control Lists (ACLs)100 shared for MAC (ingress)Packet forwarding rate(64 byte packet size) (Mpps) 11.914.838.638.677.3 Jumbo frame support (bytes)10K10K921692169216 Acoustic noise level @ 25°C (dBA) (ANSI-S10.12)Fan-less Fan-less Fan-less32.8dBA26.0dBAMean Time Between Failures (MTBF) @ 25°C2,957,592 hrs(337 yrs)1,081,119 hrs(123yrs)1,999,947 hrs(228 yrs)1,328,429 hrs(152 yrs)1,271,842 hrs(145 yrs)1G Copper Latency(64-byte; 1518-byte; 9216-byte frames)3.995µs;4.202µs;3.966µs3.995µs;4.202µs;3.966µs3.858μs;3.868μs;3.754μs3.734μs;3.749μs;3.807μs2.860μs;2.920μs;2.760μs1G Fiber Latency(64-byte; 1518-byte; 9216-byte frames)3.428µs;3.666µs;3.400µs2.899μs;2.937μs;2.860μs2.896μs;2.903μs;2.914μs1.740μs;1.720μs;1.680μsL2 Services - VLANsIEEE 802.1Q VLAN tagging YesIP-based VLANs YesMAC-based VLANs YesAuto-Voice VLAN Yes, based on OUI bytes (default database and user-based OUIs) in the phone sourceMAC addressAuto-VoIP Yes, based on protocols (SIP). Prioritzes traffic to a higher queueVoice VLAN Yes, based on either VLAN ID or 802.1p priority, packets are passed onto the connecting VoIPphone using LLDP-MED.Auto-Video VLAN YesL2 Services - Availability GS308T GS310TP GS324T GS324TP GS348T Broadcast, multicast, unknown unicast stormcontrol YesIEEE 802.3ad - LAGs (LACP)YesIEEE 802.3x (full duplex and flow control)YesIEEE 802.1D Spanning Tree Protocol YesIEEE 802.1w Rapid Spanning Tree Protocol YesIEEE 802.1s Multiple Spanning Tree Protocol YesL2 Services - Multicast FilteringIGMP snooping (v1, v2, and v3)YesIGMP snooping querier YesDHCP ServicesDHCP client YesDHCP snooping YesLink AggregationIEEE 802.3ad - LAGs (LACP)YesManual Static LAG Yes# of Static or LACP LAGs8 LAGs with max 8 members in each LAG# of Members in each LAGNetwork Monitoring and Discovery Services802.1ab LLDP YesSNMP v1, v2c, v3RMON group 1,2,3,9YesNetwork SecurityIEEE 802.1x YesGuest VLAN YesRADIUS-based VLAN assignment via .1x YesMAC-based .1x YesRADIUS accounting YesAccess Control Lists (ACLs)L2 / L3 / L4 ingressIP-based ACLs (IPv4 and IPv6)IPv4MAC-based ACLs YesTCP/UDP-based ACLs YesMAC lockdown YesMAC lockdown by the number of MACs YesControl MAC # Dynamic learned entries4096Control MAC # Static entries48IEEE 802.1x RADIUS port access authentication YesPort-based security by locked MAC addresses YesNetwork Security GS308T GS310TP GS324T GS324TP GS348T Broadcast, multicast, unknown unicast stormcontrol YesDoS attacks prevention YesQuality of Service (QoS)Port-based rate limiting Ingress andegress Ingress andegress Egress Egress EgressPort-based QoS YesDiffServ QoS YesIEEE 802.1p COS YesDestination MAC and IP YesIPv4 and v6 DSCP YesIPv4 and IPv6 T oS YesWeighted Round Robin (WRR)YesStrict priority queue technology YesAuto-VoIP VLAN / Auto-Voice VLAN Yes, based on OUI bytes (default database and user-based OUIs) in the phone source MAC address Auto-VoIP Yes, based on protocols SIP, H323 and SCCP. Prioritzes traffic to a higher queueVoice VLAN Yes, based on either VLAN ID or 802.1p priority, packets are passed onto the connecting VoIP phoneusing LLDP-MEDAuto-Video VLAN YesIEEE Network Protocols• IEEE 802.3 Ethernet• IEEE 802.3u 100BASE-T• IEEE 802.3ab 1000BASE-T• IEEE 802.3af PoE• IEEE 802.3at PoE+• IEEE 802.3az Energy Efficient Ethernet (EEE)• IEEE 802.3ad Dynamic Link Aggregation (LACP)• IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX • IEEE 802.3x Full-Duplex Flow Control• IEEE 802.1Q VLAN Tagging• IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED)• IEEE 802.1p Class of Service (CoS)• IEEE 802.1D Spanning Tree Protocol (STP)• IEEE 802.1s Multiple Spanning Tree (MSTP)• IEEE 802.1w Rapid Spanning Tree (RSTP)• IEEE 802.1x RADIUS Network Access ControlManagementPassword management YesConfigurable management VLAN YesAdmin access control via RADIUS and TACACS+YesSNTP client over UDP port 123YesSNMP v1/v2c YesSNMP v3 with multiple IP addresses YesRMON group 1,2,3,9YesPort mirroring Yes ingress and egressMany-to-one port mirroring 810262652 Web browser-based graphicaluser interface (GUI)YesManagement GS308T GS310TP GS324T GS324TP GS348T Smart Control Center (SCC) for multi-switchmanagement YesDual software (firmware) image YesCable test utility Yes Yes No No Yes TLS/HTTPS Web-based access (version)Yes (v1.2)File transfers (uploads, downloads)TFTP / HTTPHTTP upload/download (firmware)YesSyslog (RFC 3164)YesLEDsPer port Speed, Link/ActivitySpeed, Link/Activity, or PoEin differentmodeSpeed, Link/ActivitySpeed, Link/Activity, or PoEin differentmodeSpeed, Link/ActivityPer device Power Power, PoE Max Power Power, Fan, PoEMax Power, Fan Physical SpecificationsDimensions (W x D x H)158 x 101 x 30 mm(6.2 x 4.0 x 1.2 in)236 x 101 x 30 mm(9.3 x 4.0 x 1.2 in)328 x 169 x 43 mm(12.9 x 6.7 x 1.7 in)330 x 206 x 43 mm(13.0 x 8.1 x 1.7 in)440 x 206 x 43 mm(17.3 x 8.1 x 1.7 in)Weight 0.41kg(0.9 lb)0.61kg(1.34 lb)1.62kg(3.57 lb)2.69kg(5.93 lb)3.05 kg(6.72 lb)Power ConsumptionMax power (worst case, all ports used, full PoE,line-rate traffic) (Watts) 6.4W69.3W13.5W229.9W39.1W Max power without PoE (worst case, all portsused, line-rate traffic) (Watts)15.1W16.3WIddle power consumption (all ports link-downstandby) (Watts) 2.0W 3.3W 6.5W11.1W25.0WHeat Dissipation (worst case, all ports used, full PoE, line-rate traffic) (BTU/hr)Max:22.02 BTU/hrMax:236.59 BTU/hrMax:46.09 BTU/hrMax:784.88 BTU/hrMax:148.24 BTU/hrEnergy Efficient Ethernet (EEE) IEEE 802.3az Yes (deactivated by default)Fan Fan-less Fan-less Fan-less21 Environmental SpecificationsOperatingOperating temperature 0° to 40° C (32° to 104° F)0° to 45° C (32° to 113° F) Humidity (relative)95% maximum relative humidity (RH), non-condensingAltitude10,000 ft (3,000 m) maximumStorageStorage temperature –20° to 70°C (– 4° to 158°F)Humidity (relative)95% maximum relative humidity (RH), non-condensingAltitude10,000 ft (3,000 m) maximumElectromagnetic Emissions and Immunity GS308T GS310TP GS324T GS324TP GS348TCertifications CE: EN 55032:2012+AC:2013/CISPR 32:2012, EN 610003-2:2014, Class B, EN 61000-3-3:2013, EN 55024:2010VCCI: VCCI-CISPR 32:2016, Class ARCM: AS/NZS CISPR 32:2013 Class ACCC: GB4943.1-2011; YD/T993-1998; GB/T9254-2008 (Class A)FCC: 47 CFR FCC Part 15, Class A, ANSI C63.4:2014ISED: ICES-003:2016 Issue 6, Class A, ANSI C63.4:2014BSMI: CNS 13438 Class ASafetyCertifications CB report / certificate IEC 60950-1:2005 (ed.2) + A1:2009 + A2:2013UL listed (UL 1950)/cUL IEC 950/EN 60950CE LVD: EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013RCM (AS/NZS) 60950.1:2015CCC (China Compulsory Certificate): GB4943.1-2011; YD/T993-1998; GB/T9254-2008 (Class A) BSMI: CNS 14336-1Warranty and SupportHardware Limited Warranty 5 years (switch)2 years(power adapter)5 years (switch)2 years(power adapter)5 years 5 years 5 yearsT echnical support via phone90 days free from date of purchase* Next-Business-Day (NBD) Replacement 5 yearsProSUPPORT OnCall 24x7 Service Packs**OnCall 24x7 extends the 90-day phone and email warranty entitled technical support for standard and advanced features to the length of the contract term.Category S1:PMB0S11-10000SPMB0S31-10000SPMB0S51-10000SCategory S2:PMB0S12-10000SPMB0S32-10000SPMB0S52-10000SCategory S2:PMB0S12-10000SPMB0S32-10000SPMB0S52-10000SCategory 1:PMB0311-10000SPMB0331-10000SPMB0351-10000SCategory 1:PMB0311-10000SPMB0331-10000SPMB0351-10000SPackage ContentsSmart SwitchüüüüüPower AdapterüüPower Cord (localized to region of sale)üüüüüRackmount KitüüüRubber footpads for tabletop installationüüüüüInstallation GuideüüüüüOrdering InformationGS308T-100NAS North America, Latin AmericaGS308T-100PES EuropeGS308T-100UKS United KingdomGS308T-100AUS Asia PacificGS308T-100JPS JapanGS308T-100INS IndiaGS308T-100PRS ChinaGS310TP-100NAS North America, Latin AmericaGS310TP-100EUS EuropeGS310TP-100AJS Asia PacificGS310TP-100INS IndiaGS310TP-100PRS ChinaGS324T-100NAS North America, Latin AmericaGS324T-100EUS EuropeGS324T-100AJS Asia PacificGS324T-100INS IndiaGS324T-100PRS ChinaGS324TP-100NAS North America, Latin AmericaGS324TP-100EUS EuropeGS324TP-100AJS APACGS324TP-100INS IndiaGS324TP-100PRS ChinaGS348T-100NAS North America, Latin AmericaGS348T-100EUS EuropeGS348T-100AJS APACGS348T-100INS IndiaGS348T-100PRS ChinaOptional Modules and AccessoriesAGM731F SFP Transceiver 1000BASE-SX (Short range, multimode)AGM732F SFP Transceiver 1000BASE-LX (Long range, single mode)AGM734-10000S SFP Transceiver 1000BASE-T Copper RJ45 GBIC* This product comes with a limited warranty that is valid only if purchased from a NETGEAR authorized reseller, and covers unmodified hardware, fans and internal power supplies – not software or external power supplies, and requires product registration at https:///business/registration within 90 days of purchase; see https://gear. com/about/warranty for details. Intended for indoor use only.** The NETGEAR OnCall 24x7 contract provides unlimited phone and email technical support for your networking product. For ProSAFE products purchased prior to 06/2014, also includes next business-day hardware replacement.† NETGEAR #1 in US Market Share according to NPD data for Unmanaged and Smart Switches, September 2019. NETGEAR #1 in Europe Market Share according to Context data for Unmanaged and Smart Switches, September 2019.NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand names mentioned herein are for identification purposes only and may be trademarks of their respective holder(s).NETGEAR,Inc.350E.PlumeriaDrive,SanJose,CA95134-1911USA,1-888-NETGEAR(638-4327),E-mail:****************,DS- GS308T/GS310TP/GS324T/GS324TP/GS348T-28Sept22。

惠普一体机电脑

300-1018cn处理器含Hyper Transport™技术的全新AMD双核速龙™II处理器235e (2.7GHz) 操作系统正版Windows® 7 Home Premium家庭高级版★处理器技术规格采用4000MHz HT3.0总线，2MB二级缓存规格2GB DDR3内存/320GB SATA 7200转高速硬盘/SuperMulti光驱（支持＋/－/RAM三种格式的DVD刻录机）& Light Scribe盘面光刻技术显示器20英寸16:9全高清宽屏液晶显示屏显卡芯片nVidia® GeForce™ G210 3D PCI-Express独立显卡显存2303MB*数码读卡器6合1读卡器高速数码接口USB2.0X7(前2后5)无线局域网内置蓝牙高清晰数字音频接口SPDIF-Out(同轴数字音频输出接口)键盘鼠标惠普超纤薄多媒体无线键盘、惠普无线光电鼠标宽带接口主板集成10M/100M/1000M自适应宽带网卡音响系统内置High Definition音响系统-支持5.1环绕音响家庭娱乐工具HP Touchsmart软件套装/PC Doctor电脑诊断系统/Cyberlink多媒体软件//Recovery CD Creator/Norton网络安全特警2009，60天免费使用(预防病毒，黑客和隐私泄露)其它支持壁挂保修3年免费部件保修3年免费硬件上门服务价格￥6,599300-1038cn处理器含Hyper Transport™技术的全新AMD三核速龙™II处理器400e (2.2GHz) 操作系统正版Windows® 7 Home Premium家庭高级版★处理器技术规格采用4000MHz HT3.0总线，1.5MB二级缓存规格4GB DDR3内存/500GB 3G SATA 7200转高速硬盘/ SuperMulti光驱（支持＋/－/RAM三种格式的DVD刻录机）&Light Scribe盘面光刻技术显示器20英寸16:9全高清宽屏液晶显示屏显卡芯片nVidia® GeForce™ G210 3D PCI-Express独立显卡显存2303MB*数码读卡器6合1读卡器高速数码接口USB2.0X7(前2后5)电视卡无线局域网无线局域网802.11 b/g/n内置蓝牙高清晰数字音频接口SPDIF-Out(同轴数字音频输出接口)键盘鼠标惠普超纤薄多媒体无线键盘、惠普无线光电鼠标宽带接口主板集成10M/100M/1000M自适应宽带网卡音响系统内置High Definition音响系统-支持5.1环绕音响其它支持壁挂家庭娱乐工具HP Touchsmart软件套装/PC Doctor电脑诊断系统/Cyberlink多媒体软件//Recovery CD Creator/Norton网络安全特警2009，60天免费使用(预防病毒，黑客和隐私泄露)保修3年免费部件保修3年免费硬件上门服务价格￥7,399300-1058cn处理器含Hyper Transport™技术的全新AMD四核速龙™II处理器600e(2.2GHz) 操作系统正版Windows® 7 Home Premium家庭高级版★处理器技术规格采用4000MHz HT3.0总线，2MB二级缓存规格4GB DDR3内存/750GB 3G SATA 7200转高速硬盘/ SuperMulti光驱（支持＋/－/RAM三种格式的DVD刻录机）&Light Scribe盘面光刻技术显示器20英寸16:9全高清宽屏液晶显示屏显卡芯片nVidia® GeForce™ G210 3D PCI-Express独立显卡显存2303MB*数码读卡器6合1读卡器高速数码接口USB2.0X7(前2后5)电视卡高清数字电视调谐卡（PAL制式，带有个人影音录制功能的电视接收器，并具有硬件采集功能）无线局域网无线局域网802.11 b/g/n内置蓝牙高清晰数字音频接口SPDIF-Out(同轴数字音频输出接口)键盘鼠标惠普超纤薄多媒体无线键盘、惠普无线光电鼠标、全功能媒体中心无线遥控器宽带接口主板集成10M/100M/1000M自适应宽带网卡音响系统内置High Definition音响系统-支持5.1环绕音响其他支持壁挂家庭娱乐工具HP Touchsmart软件套装/PC Doctor电脑诊断系统/Cyberlink多媒体软件//Recovery CD Creator/Norton网络安全特警2009，60天免费使用(预防病毒，黑客和隐私泄露)保修3年免费部件保修3年免费硬件上门服务价格￥8,599600-1068cn处理器英特尔®酷睿™ 2双核处理器T6600# (2.2GHz)操作系统正版Windows® 7 Home Premium家庭高级版★处理器技术规格800MHz前端总线，2MB二级缓存，64位技术，Execute Disable Bit规格4GB DDR3内存/750GB 3G SATA 7200转高速硬盘/ SuperMulti光驱（支持＋/－/RAM三种格式的DVD刻录机）& Light Scribe盘面光刻技术显示器23英寸16:9全高清宽屏液晶显示屏显卡芯片nVidia® GeForce™ GT230M 3D PCI-Express独立显卡显存2815MB﹡数码读卡器6合1读卡器高速数码接口USB2.0X7(前2后5)电视卡无线局域网无线局域网802.11 b/g/n内置蓝牙蓝牙2.1高清晰数字音频接口SPDIF-Out(同轴数字音频输出接口)键盘鼠标惠普超纤薄多媒体无线键盘、惠普无线光电鼠标宽带接口主板集成10M/100M/1000M自适应宽带网卡音响系统内置High Definition音响系统-支持5.1环绕音响其他环境调节灯/支持壁挂家庭娱乐工具HP Touchsmart软件套装/PC Doctor电脑诊断系统/Cyberlink多媒体软件//Recovery CD Creator/ Norton网络安全特警2009，60天免费使用(预防病毒，黑客和隐私泄露)保修3年免费部件保修3年免费硬件上门服务价格￥11,999600-1088cn处理器英特尔® 酷睿™ 2双核移动处理器P7550# (2.26GHz)操作系统正版Windows® 7 Home Premium家庭高级版★处理器技术规格1066MHz前端总线，3MB二级缓存，64位技术，Execute Disable Bit规格4GB DDR3内存/1000GB 3G SATA 7200转高速硬盘/ 蓝光SuperMulti光驱（支持＋/－/RAM三种格式的DVD刻录机）显示器23英寸16:9全高清宽屏液晶显示屏显卡芯片nVidia® GeForce™ GT230M 3D PCI-Express独立显卡显存2815MB*数码读卡器6合1读卡器高速数码接口USB2.0X7(前2后5)电视卡高清数字电视调谐卡（PAL制式，带有个人影音录制功能的电视接收器，并具有硬件采集功能）无线局域网无线局域网802.11 b/g/n内置蓝牙蓝牙2.1高清晰数字音频接口SPDIF-Out(同轴数字音频输出接口)键盘鼠标惠普超纤薄多媒体无线键盘、惠普无线光电鼠标、全功能媒体中心无线遥控器宽带接口主板集成10M/100M/1000M自适应宽带网卡音响系统内置High Definition音响系统-支持5.1环绕音响其他环境调节灯/支持壁挂家庭娱乐工具HP Touchsmart软件套装/PC Doctor电脑诊断系统/Cyberlink多媒体软件//Recovery CD Creator/Norton网络安全特警2009，60天免费使用(预防病毒，黑客和隐私泄露)保修3年免费部件保修3年免费硬件上门服务价格￥14,999。

MAX352中文资料

Note 2: All leads are soldered or welded to PC board.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Digital Inputs, VCOM, VNC, VNO (Note 1) ...........(V- - 2V) to (V+ + 2V) .........................................................or 30mA (whichever occurs first) Current (any terminal) .........................................................30mA Peak Current COM_, NO_, NC_
Storage Temperature Range .............................-65°C to +150°C Lead Temperature (soldering, 10sec) .............................+300°C

CRNS35EU3S6G中文说明书PDF版

最新的支持情况请咨询客户支持中心。 ※由于Windows XP的操作系统限制硬盘容量不超过2TB,(2TB以上的硬盘在Windows Vista/7/8, 苹果操作系统
可以正常使用,非本产品限制)
【对应OS(操作系统)】
■Windows
・Windows 8、Windows ７、Windows Vista、Windows XP(32bit) ※以上的Windows操作系统,本公司已经详细测试可用。本公司测试均以WINDOWS正版系统为基准 ※请更新到最新操作系统版本
Century Corporation User's Manual
祼族双盘位硬盘盒SATA6G USB3.0 & eSATA
CRNS35EU3S6G
使用说明手册
CRNS35EU3S6G Manual 2013/08/27
【前言】
由衷的感谢您购买世特力祼族双盘位硬盘盒SATA6G USB3.0 & eSATA。在使用本产品前,请仔细阅读本产品的使用说明书。
■长时间不使用本产品时请拔除连接线长时间不使用本产品时请拔除连接线并妥善保存。
■移动本产品时请将连接线等全部拔除 ■请勿放置于幼童伸手可及之处
请勿让幼童爬上机器上否则可能会造成受伤。 ■请做好静电防护
本产品为精密电子机器,静电可能会造成故障。
i 〈CRNS35EU3S6G〉
■目录
■前言………………………………………………………………………… ⅰ ■安全注意事项……………………………………………………………… ⅰ ■限制事项…………………………………………………………………… １ ■使用前注意事项…………………………………………………………… １ ■产品规格…………………………………………………………………… ２ ■产品内容…………………………………………………………………… ２ ■各部位名称………………………………………………………………… ２ ■对应HDD(硬盘)… ………………………………………………………… 3 ■对应OS(操作系统)… ……………………………………………………… 3 ■对应机种…………………………………………………………………… ４ ■组装HDD(硬盘)的方法… ………………………………………………… ５ ■连接PC的方法… …………………………………………………………… ９ ■开启电源的方法…………………………………………………………… 10 ■使用方法…………………………………………………………………… 11 ■关于电源连动功能………………………………………………………… 13 ■RAID模式的设定/变更方法… …………………………………………… 14 ■各MODE的功能说明… …………………………………………………… 15 ■工作模式的设定/变更方法… ……………………………………………… 19 ■硬盘故障与重组…………………………………………………………… 21 ■格式化……………………………………………………………………… 23

G-S350SU绿色USB2.0 eSATA 3.5英寸硬盘外壳用户手册说明书

Green USB2.0/eSATA Combo Enclosure for 3.5” Serial ATA Hard Drivewith One-touch BackupG-S350SUUser’s ManualCONTENTSINTRODUCING GREEN USB2.0/ESATA3.5” Hard Drive ENCLOSURE 3 About this Guide3 System Requirements3 Package Contents4Safety Precautions 4HARDWARE BASICS6HARDWARE INSTALLATION710HARD DRIVE PARTITION andFORMAT PROCEDURES in PC WINDOWS 2000/XP/VISTA 12ONE-TOUCH BACKUP IN PC16Main Interface Screen 16Task Configuration 17Example of a backup task 18USB Connection for Mac 10Software Installation for PC 11Software Installation for Mac SATA Connection for MacOS X 10.2 and above 10SATA Connection for Windows 2000/XP/Vista 11USB Connection For Windows 2000/XP/Vista 11Frequently Asked Questions 20Introducing Green USB2.0/eSATA 3.5” Hard Drive EnclosureThank you for choosing the G-S350SU, a Green USB2.0/eSATA 3.5” SATA Hard Drive Enclosure with One-touch Backup. Its smart power management will power down the Hard Drive automatically after the Hard drive is idle for 5 minutes (or when it detects USB cable is disconnected). Since the enclosure drive maintains the presence in the system, users can still access the drive anytime they want to. The G-S350SU handles the drive power down and spin up seamlessly to save electricity and money, which makes it an environment-friendly Green product.The One-touch Backup button and included IniBackup software allows Windows 2000/XP/Vista users to backup their critical data easily and restore them quickly when needed. The One-touch Backup only supports USB connection under Windows environment. eSATA connection and Mac do not support One-touch Backup. However, the enclosure can still support a third-party backup software such as Apple Time Machine etc.About This GuideBefore you begin using the G-S350SU, be sure to read this manual in its entirety.This guide contains: Introducing Green USB2.0/eSATA 3.5” Hard Drive Enclosure Hardware Basics Hardware Installation USB connection for Mac USB connection for PC Hard drive partition and format procedure in PC One-touch backup in PCSystem RequirementsBased on SATA II, SATA I, USB2.0 and USB1.1 specifications the transfer rates are up to:SATA II- 3.0Gb/sSATA I- 1.5Gb/sUSB2.0 - 480Mb/sUSB1.1 - 12Mb/sG-S350SU can support the speed specification listed above, however its transfer rates are likely to be lower, and will vary depending upon the type of SATA and USB host controller, SATA Hard Drive and computer hardware.•Windows PC, Macintosh desktop or NoteBook computer with available eSATA and/or USB port •MacOS X 10.2 and above for SATA connection, MacOS 9.2 and OS X for USB connection •Windows 2000/ Windows XP/ Windows Vista •Pentium II/ compatible and above with 128MB RAM •Both SATAII host port and SATAII hard drive are required for SATAII transfer speed •USB2.0 host port is required for Hi-Speed USB2.0 transfer speedPackage ContentsThe G-S350SU package includes the followings:Green eSATA/USB2.0 3.5” Hard Drive EnclosureQuick Installation GuideThe software CD contains the manual and backup softwareUSB2.0 cableAC/DC adaptereSATA cable(optional)Safety PrecautionsON INSTALLATION1. To reduce the risk of fire or electric shock, do not expose this product to rain,water or moisture.2. Do not place any containers with liquids (drinking glass, flower vase, etc.) or containers with small metal parts (paper clips, etc.) on top of the unit.3. According to standard industry practice, surge protection is recommended for all telecommunications devices. Surge suppressors and/or line conditioning should be used on the input power supply.ON OPERATIONDo not move the chassis during operation. Doing so may cause a malfunction.Protect the unit from shocks and vibrations.Do not use the subsystem in areas exposed to oily smoke or steam, such as a kitchen or close to a humidifier.Do not use the subsystem in locations exposed to rain or splashes of water, such as outdoors, in a bathroom, or close to a window.Do not use the subsystem on an unstable or slanted surface without proper support.Do not expose the unit to direct sunlight or hot air where the temperature could exceed 45℃or very cold locations where the temperature is below 0℃.Keep the power cord away from hot appliances.Do not touch the power cord with wet hands.ON TRANSPORTATIONSave the packing materials as you may need to repack and transport the unit at a later date. Always remove the disc before moving the unit.ON POWER SOURCESWhen you are not using the unit for a long time, disconnect the power cord from the unit.To unplug the AC power adapter from the wall outlet, grasp the adapter itself. Do not pullthe cord.WarningIf any of the following conditions occur, immediately disconnect the power cord from the wall outlet and contact your dealer or an authorized service station. Continuing to use the computer involves the risk of fire and electric shock.•Smoke or unusual smell is coming from the subsystem.•Water has entered the unit, or the unit has become wet.• A foreign object has entered the unit.•The unit has been dropped or the front panel or frame has been damaged.•The power cable is damaged, causing wire breakage or exposed leads.Hardware BasicsPrecaution:Please make sure your hand is dry and remove static from your body by touching metal parts of your computer chassis.Power/One-touch Backup button:--- Back Panel--- 2 -6mm Screws --- 6 -5mm Screws --- 8 -4mm Screws --- Base Tray bridge--- Front Panel --- Base Tray --- Power/One-touch Backup button --- Enclosure Sleeve 1, Press and hold the button for 1 second to turn on the enclosure, LED turns to blue;2, While the enclosure is powered on and connected to the PC through USB cable, press the button for1 second to start the preconfigured backup task in IniBackup;3, To shut down G-S350SU, press and hold the buton for 3 seconds;4, The hard drive will spin down and enter sleep mode to save power automatically after 5 min idle.Hardware Installation1. Unscrew to loosen the Enclosure back panel. Remove the back panel.2. Use your figers to push the Base Tray out.Front PanelBack Panelk c a B t n o r F Note:The diagrams below are using the G-S350U Enclosure as an example.3. Pull the enclosure sleeve out from the Base Tray and place it aside.4. Align the black Power/SATA connector on the hard drive to the black female SATA connector on the Base plate bridge, and push the drive into the connector completely.5. Secure the HDD to the Base Tray with 2 hard drive screws.6. Push the Base Tray into the Enclosure Sleeve.7. Secure the Base Tray and Enclosure Sleeve with two 6mm screws.8. Plug the AC/DC adapter into the Enclosure, and connect the unit to your computer using a USBcable or eSATA cable. Then press the power button to turn it on.Software Installation for MacSATA Connection for MacOS X 10.2 and aboveG-S350SU has built in eSATA port for you to take advantage of high throughput performance. At the moment when this manual is written, none of Mac computers has built-in external SATA port accessible to connect G-S350SU enclosure. Current solution is to add a third-party Mac compatible PCI or ExpressCard to SATAII or SATAI host controller adapter with eSATA port or SATA port (with “L” shaped key type). When SATA port is available, please get a SATA cable with proper eSATA and/or SATA connectors on both ends to connect G-S350SU to your Mac, then follow steps below to use G-S350SU enclosure:1. When computer is powered off, attach G-S350SU to the SATA port of the computer.2. Turn on G-S350SU first, then power on your Mac.3. After Mac OS boots up, it will recognize it automatically, ask you to initialize the newdrive if it was not initialized yet, and mount the drive on desktop.Above described connection and power sequence is referred to as Hot Boot. There aretotal five power sequence modes by which an external hard drive can possibly be usedwith a computer system. They are defined as follows:Hot Boot – Computer is off, enclosure is on and is attached to computer. Boot up system.Cold Boot – Computer is off, enclosure is off and is attached to computer.Boot up system completely, then turn on the enclosure.Hot Plug – System is up and running, enclosure is turned on then attached to computer.Cold Plug – System is up and running, enclosure is off then attached to computer. Enclosureis turned on.Power Cycle – System is up and running, enclosure is on and mounted on the computer.Then,power off the enclosure, wait for several seconds and turn the enclosure back on.It is important to note that different SATA host adapters handle the power sequence in different way. Some support all five power sequence modes, the other can only support Hot Boot.G-S350SU supports all five power sequence modes. To find out what your SATA host adapteris capable of, please contact the manufacturer of SATA host adapter, or simply try all power sequence mode yourself.USB Connection for MacWhen the Enclosure is connected to the computer, MacOS X will recognize it automatically, initialize it (if the drive is not initialized) and mount the drive to desktop. All five power sequence modes are supported in USB connection. Note: MacOS X provides a Disk Utility to create multiple volumes, which is located in Utilities folder inside Applications folder.Software Installation for PCSATA Connection for Windows 2000/XP/ VistaSome PC computers nowadays are equipped with external SATA ports for peripheral connectivity,or provide a SATA cable and bracket to route internal SATA port on motherboard to external port. Otherwise, to take advantage of high performance SATA connection, you need to add a third-party SATA II or SATA I host controller adapter with external eSATA port or SATA port (with the “L” shaped key type). When external SATA port is available, please get a SATA cable with proper eSATA and/or SATA connectors on both ends to connect G-S350SU to your PC, and follow steps below to use G-S350SU enclosure:1. When computer is powered off, attach G-S350SU to the SATA port of the computer.2. Turn on G-S350SU first, then power on your PC.3. After Windows boots up, it will load the driver and recognize the enclosure automatically. If youdon’t see a new(SATA) drive in My Computer, probably the SATA drive needs to be partitionedand formatted first. Please refer to next section to partition and format the drive if necessary. Above described connection and power sequence is referred to as Hot Boot. There are total five power sequence modes, Hot Boot, Cold Boot, Hot Plug, Cold Plug, and Power Cycle, by which an external hard drive can possibly be used with a computer system. Please refer to the section “SATA Connection for MacOS X 10.2 and above” for definition.It is important to note that different SATA host adapters handle the power sequence in different way. Some support all five power sequence modes, the other can only support Hot Boot. G-S350SU supports all five power sequence modes. To find out what your SATA host adapter is capable of, please contact the manufacturer of SATA host adapter, or simply try all power sequence mode yourself.USB Connection For Windows 2000/XP/VistaWhen the enclosure is connected to the computer and power on, the system will start installing for the proper driver. Please follow the on-screen instruction to complete the driver installation.If you do not see the new drive letter added in My Computer after the driver finishes loading, the reason could be the hard disk such as a brand new one has no partition and format yet. In this case, please follow the procedures in next section to partition and format it before using.Hard Drive Partition and Format procedures in PC Windows 2000/XP/Vista:If a new hard disk icon dose not appear in “My Computer”, check device manager under system in the control panel. Then double click on “Disk Drives” to see if a new entry appears.If you can see a new entry as shown (Example, WDC WD80 OBB-32BSA0) above, you are ready to partition and format the drive.1. Open Control panel, “Administrative Tools” and “Computer management”.Step 22. Click on “Disk Management”.Step 33. “Write Signature and Upgrade Disk Wizard” windows will show up and click “Next”.Step 4 4. Write a signature to the new drive, click “Next”.Step 5 5. Click “Finish” to close the wizard.Step 66. Select the new “Unallocated” disk, and then right click to choose “Create partition”.Step 77. Follow the onscreen instruction to partition and fully format the drive.Note: If it assigns a new hard drive letter but format dose not run automatically, please exit “Computer Management”, and find the new drive letter in My computer and right click it to select format.One-touch Backup in PCAfter the drive is partitioned and formatted, it should mount as a new drive letter in the PC Windows 2000, XP or Vista. Next, insert the included CD into the system, locate and open a folder named G-S350SU, find and double click the ButtonManager.exe installation file, follow the on-screen instruction to complete the process. Restart the computer, you are ready to configure the backup task and use the One-touch Backup function as described next.Note：The One-Touch Backup function only works in USB connection under Windows PC.Main Interface ScreenPlease launch the IniBackup software, the following description of the program will help you to understand how to use it.Area 1 -- Task menu, listing all preconfigured backup tasks.Button 2 -- Open the task file previously saved.Button 3 -- Save the task list to a file *.iniBackup.Button 4 -- Display the drive property.Button 5 -- Add a new task.Button 6 -- Open a new list of task.Button 7 -- Delete the task selected.Button 8 -- Modify the setting of a task.Button 9 -- Execute all the tasks in the menu area.Button10 -- Exit the program.Area 11 -- It displays the path of auto-loading task file when the square box is checked, and One-touch Backup button is pressed.Task ConfigurationArea 1 -- Source Directory, to specify the file and folder path to backup/restore/copy from. Area 2 -- Destination Directory, to specify the destination path of the backup/restore/copy task. Option 3 – Active. If checked, the task will be executed when you execute the backup utility by pressing One-touch button or through the “Execute” icon in task list screen. Option 4 -- All Files including subdirectory will be in backup/restore/copy if checked. Option 5 – Newer. If checked, only new file will be saved in the backup compared with previous backup. Option 6 – Archive. If checked, only archive files will be copied. Option 7 -- Back up. If you choose the selection of “Backup”, the backup function will backup file system from source directory to target directory.Option 8 -- Restore. If you choose the selection of “Restore”, the restore function will restore file system from source directory to replace the existing files of target directory.Option 9 -- Copy. If you choose the selection of “Copy”, the copy function will copy file systemfrom source directory to target directory.12345689Example of a backup taskStep 11. Click the “Add” button in the IniBackup main screen.Step 22. Click the “Browse” buttons to set the path of source and destination.3. Configure the options and click OK.Step 3Step 44. Return to the main screen and then click the “Save” button to save the task to a file. Assign a name to the task file.Step 55. In the IniBackup main screen,(1), Open a task file previously saved;(2). Check the option “Loaded Task File” in order to launch this backup task automatically when One-touch button is pressed.(3). Exit the program.6. Press the front backup button for 1 second to start the backup.Frequently Asked QuestionsQ1,What are SATA,SATA I,SATA II,eSATA any way?How are they related to G-S350SU enclosure?A1: SATA stands for Serial ATA, in contrast to old Parallel ATA (IDE, EIDE, ATA and ATAPI) technology. SATA starts with 1.5Gb/s specification, and evolves to 3.0Gb/s specification, which is commonly referred to as SATA II. Hence, original SATA 1.5Gb/s is called SATA I to distinguish with SATA II 3.0Gb/s.Initially SATA was designed as an internal or inside-the-box interface technology for storage device like HDD. Both SATA I and SATA II hard drives use plug and receptacle interface with “L” shaped key as shown below.This connectors and cable(flat) with “L” shaped key support both SATA 1.5Gb/s and 3.0Gb/s, however the cable length is limited to 1m(around 3.3 feet) maximum.As shown above, it is more and more common to find a new type of SATA receptacle in the system or PCI/ExpressCard host card and plug(without “L” shaped key), called eSATA. eSATA becomes a standard for external SATA peripherals. Our G-S350SU has eSATA port built in. Depending on the type of SATA port you have in the computer, please get the proper SATA cable to connect them.Q2. How should I disconnect G-S350SU safely from the computer? After I disconnect the SATA enclosure, why does the drive icon still stay on the desktop of MacOS X?A2: In USB connection, in Windows PC, please click “Safely remove USB mass storage device –Drive letter” line inside Safely Remove Hardware icon on the System Tray; In Mac computer, please trash the external drive icon. Then disconnect G-S350SU from the system.In SATA connection, depending on the SATA host controller(and sometimes OS) you use, some controllers support hot plug and unplug function, some don’t. You have to find out its capability. To prevent data corruption, the safest way to disconnect SATA cable or power off G-S350SU isto shut down computer first.SATA drive (or SATA connection) is not treated essentially as removable device to the most of systems if not all. That is why there is no eject icon associated to SATA drive in Finder of Mac OS X, and System Tray in Windows has no Remove Hardware option for SATA drive. Therefore, when the SATA drive is connected, some system still keeps SATA drive icon, you just won’t be able to use the drive until you connect it back.Q3. How is SATA compared to USB and Firewire in speed? What performance gain can one expect by using SATA connection?A3: Following chart shows the specification data rate(MBps) and Overhead among USB, Firewire and SATA.Next table compares real world benchmark between USB,Firewire and SATA drives:Table: Comparison of interface speeds and data transferrates external disk drive interfacesAbove data are quoted from . The performance of G-S350SU in your application might be higher or lower depending upon the hard drive used, SATA and USB host and computer hardware. In our test, we have seen over 60MB/s sequential read and write speed in SATA connection. SATA is the better choice for storage device.。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

High Frequency, Solid Aluminum TopType 350’s solid aluminum top assures extremely low impedance. With a typical 4 to 6 nH ESL, the self reso-nant frequency is well above 100 kHz. The very low ESR assures the low impedance rating. The capacitors are ﬁtted with three rugged welded mounting leads to provide maximum resistanceHighlightsOperates to beyond 200 kHz Less than 10 nH ESL Solid aluminum top•••SpeciﬁcationsCapacitance Range:Voltage Range:Capacitance Tolerance:Operating Temperature Range:Shelf Life:Leakage Current:Cold Impedance:Ripple Current Multipliers:Load Life:Shelf Life:Vibration:90 to 11,000 F 6.3 to 100 Vdc –10 +75%–55 ºC to +105 ºC 500 hours @ +105 ºC ≤0.5 √CV µA at +25 ºC–55 º multiple of +25 ºC Z ≤6 for 6.3 V, 3 for 10 to 50 V, 2 for 75 & 100 V45 ºC 55 ºC 65 ºC 75 ºC 85 ºC 95 ºC 105 ºC 1.661.521.371.201.000.750.36Ambient TemperatureFrequency60 Hz120 Hz 360 Hz 1 kHz 5 kHz 10 kHz & up 6.3 to 20 V 0.530.650.730.900.95 1.0025 to 35 V 0.450.550.650.850.92 1.0050 to 75 V0.360.500.600.800.90 1.00100 V0.290.400.520.750.871.004,000 h @ +105 ºC at full load ∆ Capacitance ±10% ESR 150% of limit DCL 100% of limit500 h @ 105 ºC, capacitance, ESR and DCL, initial requirement10 to 55 Hz, 0.06” and 10 g max, 2 h in each planeOutline DrawingL.025±.015S1 S2DT ±.015Complies with the EU Directive 2002/95/EC requirementrestricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE).Case DimensionsPart Numbering System350JP 1152U 6R3 C Type Case Code Capacitance Tolerance Voltage Insulation 350See table900 = 90 µF U = –10 +75%6R3 = 6.3 Vdc O = Bare can161 = 160 µF T = –10 +50%063 = 63 Vdc B = Plastic insulation with epoxy 882 = 8800 µF 100 = 100 VdcC = Plastic insulation, no epoxy1152 = 11500 µFCase InchesCode Nominal Insulated S1S2TD x L D x L ±0.015±0.015GE 3/4 x 1 1/8 0.775 x 1.157 0.20.100.3GJ 3/4 x 1 5/8 0.775 x 1.657 0.20.100.3GL 3/4 x 2 1/8 0.775 x 2.157 0.20.100.3GP 3/4 x 2 5/8 0.775 x 2.657 0.20.100.3HE 7/8 x 1 1/8 0.900 x 1.157 0.30.150.4HJ 7/8 x 1 5/8 0.900 x 1.657 0.30.150.4HL 7/8 x 2 1/8 0.900 x 2.157 0.30.150.4HP 7/8 x 2 5/8 0.900 x 2.657 0.30.150.4JJ1 x 1 5/81.025 x 1.6570.30.150.4Typical Performance CurvesType 350 Impedance vs. FrequencyI m p e d a n c e (Ω)Frequency (Hz)10010k 100k 10001M 10M0.0010.010.11.0103,400 µF 6.3 Vdc6,100 µF 6.3 Vdc11,500 µF 6.3 VdcType 350 Operating Life in Kilohours vs. Ripple Current00.10.20.30.40.50.60.70.80.911Rated Ripple-Current MultipleE x p e d t e d O p e r a t i n g L i f e , k h105 ºC95 ºC85 ºC75 ºC 65 ºC 55 ºC45 ºC 1.1 1.2 1.3 1.4 1.5101001000Typical Performance CurvesRatingsESR Max ΩImped.Ripple Nom Cap Catalog +25 ºC Ω +25 ºC A +85 ºC Size (in)(µF)Part Number 120 Hz 20 kHz 100 kHz 20 kHz DxL 6.3 Vdc (8.5 Vdc Surge)1600350GE162U6R3C 0.0870.0430.040 3.23/4 x 1 1/8 2400350HE242U6R3C 0.0650.0350.034 3.77/8 x 1 1/8 3000350GJ302U6R3C 0.0500.0250.025 4.63/4 x 1 5/8 3400350JE342U6R3C 0.0580.0310.031 4.0 1 x 1 1/8 4200350GL422U6R3C 0.0350.0180.019 6.63/4 x 2 1/8 4400350HJ442U6R3C 0.0370.0200.022 5.67/8 x 1 5/8 5400350GP542U6R3C 0.0290.0150.0178.03/4 x 2 5/8 6100350JJ612U6R3C 0.0330.0180.020 6.2 1 x 1 5/8 6300350HL632U6R3C 0.0270.0150.0187.57/8 x 2 1/8 8300350HP832U6R3C 0.0220.0130.0168.87/8 x 2 5/8 8800350JL882U6R3C 0.0240.0140.0168.1 1 x 2 1/8 11000350JP113U6R3C 0.0200.0120.0159.6 1 x 2 5/8 7.5 Vdc (10 Vdc Surge)1500 350GE152U7R5C 0.0910.0440.040 3.23/4 x 1 1/8 2300350HE232U7R5C 0.0680.0350.034 3.77/8 x 1 1/8 2700350GJ272U7R5C 0.0520.0260.025 4.63/4 x 1 5/8 3200350JE322U7R5C 0.0590.0310.030 3.9 1 x 1 1/8 3900350GL392U7R5C 0.0370.0180.019 6.63/4 x 2 1/8 4200350HJ422U7R5C 0.0390.0210.022 5.67/8 x 1 5/8 5100350GP512U7R5C 0.0300.0150.0167.93/4 x 2 5/8 5800350JJ582U7R5C 0.0340.0180.019 6.1 1 x 1 5/8 6000350HL602U7R5C 0.0280.0150.0187.47/8 x 2 1/8 7900350HP792U7R5C 0.0230.0130.0168.87/8 x 2 5/8 8400350JL842U7R3C 0.0250.0140.0168.0 1 x 2 1/8 11000350JP113U7R5C0.0200.0120.0149.51 x2 5/810 Vdc (12 Vdc Surge)1400350GE142U010C 0.0980.0450.040 3.13/4 x 1 1/8 2100350HE212U010C 0.0720.0350.034 3.67/8 x 1 1/8 2600350GJ262U010C 0.0550.0260.025 4.53/4 x 1 5/8 3000350JE302U010C 0.0620.0320.030 3.6 1 x 1 1/8 3800350GL382U010C 0.0390.0190.019 6.53/4 x 2 1/8 3900350HJ392U010C 0.0410.0210.022 5.57/8 x 1 5/8 4800350GP482U010C 0.0310.0150.0167.83/4 x 2 5/8 5400350JJ542U010C0.0360.0190.0205.71 x 1 5/8ESR Max ΩImped.Ripple Nom Cap Catalog +25 ºC Ω +25 ºC A +85 ºC Size (in)(µF)Part Number 120 Hz 20 kHz 100 kHz 20 kHz DxL 10 Vdc (12 Vdc Surge)5600350HL562U010C 0.0300.0150.0187.37/8 x 2 1/8 7300350HP732U010C 0.0240.0130.0168.77/8 x 2 5/8 7800350JL782U010C 0.0260.0140.0167.5 1 x 2 1/8 10000350JP103U010C0.0210.0120.0159.0 1 x 2 5/8 12 Vdc (18 Vdc Surge)1100350GE112U012C 0.1080.0460.042 3.13/4 x 1 1/8 1700350HE172U012C 0.0790.0360.034 3.67/8 x 1 1/8 2000350GJ202U012C 0.0610.0270.025 4.43/4 x 1 5/8 2400350JE242U012C 0.0670.0320.031 3.8 1 x 1 1/8 2900350GL292U012C 0.0440.0190.020 6.43/4 x 2 1/8 3000350HJ302U012C 0.0450.0210.022 5.47/8 x 1 5/8 3700350GP372U012C 0.0350.0160.0177.73/4 x 2 5/8 4200350JJ422U012C 0.0380.0290.020 6.0 1 x 1 5/8 4400350HL442U012C 0.0320.0160.0187.27/8 x 2 1/8 5800350HP582U012C 0.0260.0130.0168.67/8 x 2 5/8 6100350JL612U012C 0.0280.0140.0167.8 1 x 2 1/8 8000350JP802U012C0.0230.0120.0159.3 1 x 2 5/8 16 Vdc (20 Vdc Surge)950350GE951U016C 0.1160.0470.042 3.03/4 x 1 1/8 1500350HE152U016C 0.0850.0370.035 3.57/8 x 1 1/8 1700350GJ172U016C 0.0660.0270.025 4.33/4 x 1 5/8 2000350JE202U016C 0.0710.0330.031 3.7 1 x 1 1/8 2500350GL252U016C 0.0470.0200.020 6.33/4 x 2 1/8 2600350HJ262U016C 0.0480.0220.022 5.37/8 x 1 5/8 3200350GP322U016C 0.0370.0160.0177.63/4 x 2 5/8 3600350JJ362U016C 0.0410.0190.020 5.9 1 x 1 5/8 3800350HL382U016C 0.0340.0160.0187.17/8 x 2 1/8 4900350HP492U016C 0.0280.0130.0168.47/8 x 2 5/8 5200350JL522U016C 0.0290.0140.0167.7 1 x 2 1/8 6800350JP682U016C0.0240.0120.0159.2 1 x 2 5/8 20 Vdc (25 Vdc Surge)800350GE801U020C 0.1250.0480.042 3.03/4 x 1 1/8 1200350HE122U020C 0.0890.0380.035 3.57/8 x 1 1/8 1500350GJ152U020C 0.0700.0280.026 4.23/4 x 1 5/8 1700350JE172U020C0.0750.0330.0313.71 x 1 1/8ESR vs. Temperature Characteristics (10 kHz)-55-40-20025406085105Temperature (ºC)0.1110100Capacitance vs. Temperature (120 Hz)-55-40-20025406085105708090100110≥ 50 Vdc ≤ 40 Vdc E S R - R a t i o t o 25 ºC V a l u eC a p a c i t a n c e - % o f 25 ºC V a l u eTemperature (ºC)≥ 75 Vdc6.3 VdcESR Max ΩImped.Ripple Nom Cap Catalog +25 ºC Ω +25 ºC A +85 ºC Size (in) (µF)Part Number120 Hz20 kHz100 kHz20 kHz DxL20 Vdc (25 Vdc Surge)2100350GL212U020C 0.0500.0200.020 6.23/4 x 2 1/8 2200350HJ222U020C 0.0510.0220.022 5.37/8 x 1 5/8 2800350GP282U020C 0.0400.0170.0177.53/4 x 2 5/8 3000350JJ302U020C 0.0430.0200.020 5.8 1 x 1 5/8 3200350HL322U020C 0.0360.0160.0187.07/8 x 2 1/8 4200350HP422U020C 0.0290.0140.0168.37/8 x 2 5/8 4500350JL452U020C 0.0310.0140.0167.6 1 x 2 1/8 5900350JP592U020C 0.0250.0120.0159.1 1 x 2 5/825 Vdc (30 Vdc Surge)600350GE601U025C 0.1400.0500.042 2.93/4 x 1 1/8 900350HE901U025C 0.1000.0390.035 3.47/8 x 1 1/8 1100350GJ112U025C 0.0790.0290.026 4.13/4 x 1 5/8 1300350JE132U025C 0.0820.0340.031 3.6 1 x 1 1/8 1500350GL152U025C 0.0560.0210.020 6.03/4 x 2 1/8 1600350HJ162U025C 0.0570.0230.022 5.17/8 x 1 5/8 2000350GP202U025C 0.0440.0170.0177.33/4 x 2 5/8 2300350HL232U025C 0.0400.0170.018 6.87/8 x 2 1/8 2300350JJ232U025C 0.0470.0200.021 5.6 1 x 1 5/8 3100350HP312U025C 0.0320.0140.0168.27/8 x 2 5/8 3300350JL332U025C 0.0340.0150.01774.0 1 x 2 1/8 4300350JP432U025C 0.0270.0130.0168.9 1 x 2 5/830 Vdc (40 Vdc Surge)450350GE451U030C 0.1550.0520.043 2.83/4 x 1 1/8 700350HE701U030C 0.1100.0410.035 3.37/8 x 1 1/8 800350GJ801U030C 0.0880.0300.026 4.03/4 x 1 5/8 950350JE951U030C 0.0890.0360.032 3.4 1 x 1 1/8 1100350GL112U030C 0.0620.0220.02 5.83/4 x 2 1/8 1200350HJ122U030C 0.0620.0240.023 5.07/8 x 1 5/8 1500350GP152U030C 0.0480.0180.0177.13/4 x 2 5/8 1700350JJ172U030C 0.0500.0210.021 5.5 1 x 1 5/8 1800350HL182U030C 0.0440.0170.018 6.67/8 x 2 1/8 2300350HP232U030C 0.0350.0150.0168.07/8 x 2 5/8 2500350JL252U030C 0.0360.0160.0177.2 1 x 2 1/8 3200350JP322U030C 0.0290.0130.0168.6 1 x 2 5/840 Vdc (50 Vdc Surge)320350GE321U040C 0.1760.0540.043 2.73/4 x 1 1/8 500350HE501U040C 0.1230.0420.035 3.27/8 x 1 1/8 600350GJ601U040C 0.1000.0310.026 3.93/4 x 1 5/8 700350JE701U040C 0.0990.0370.032 3.4 1 x 1 1/8 850350GL851U040C 0.0700.0230.02 5.73/4 x 2 1/8 900350HJ901U040C 0.0700.0250.023 4.97/8 x 1 5/8 1100350GP112U040C 0.0550.0180.017 6.93/4 x 2 5/8 1200350JJ122U040C 0.0560.0220.021 5.4 1 x 1 5/8 1300350HL132U040C 0.0490.0180.018 6.57/8 x 2 1/8 1700350HP172U040C 0.0390.0150.0167.97/8 x 2 5/8 1800350JL182U040C 0.0400.0160.0177.1 1 x 2 1/8 2300350JP232U040C 0.0320.0130.0168.51 x2 5/8 Ratings。