DIN 85003-8-1999 Technical specifications for valves for shipboard use -Part 8 Ball valves

合集下载

德国DIN标准和国际标准、中国标准中英文对照表

8
DIN96
开槽半圆头木螺钉
slotted round head wood screws
GB/T99-1986
9
DIN97
开槽沉头木螺钉
slotted countersunk head wood screws
GB/T100-1986
10
DIN125-A
平垫
plain washers
ISO7089
GB/T97.1-1985
53
DIN480
方头带垫半圆底端螺栓
square head bolts with collar,half dog point and rounded end
54
DIN508
T型槽螺母
T-slot nuts
ISO299
55
DIN525
单头螺柱
single end studs
56
DIN529
地脚螺栓
masonry bolts
ISO8737
21
DIN261
T型头螺栓
T-head bolts
22
DIN315AF
蝶型螺母(美制)
wing nuts amercia form
23
DIN315DF
蝶型螺母(德制)
wing nuts germany form
GB/T62-1988
24
DIN316AF
蝶型螺钉(美制)
wing screws amercia form
flat countersunk long square neck bolts
73
DIN607
半圆头带插销马车螺栓
cup head nib bolts

德标大全

活跃
纹极限尺
寸公称直
径从112
毫米到
180毫米
ISO一般
用途米制
螺纹 - 第
25部分：
为有优选
公差等级的细牙螺
活跃
纹极限尺
寸公称直
径从182
毫米到
250毫米
Page 6 of 97
/translate_c?hl=zh-CN&langpair=en%7Czh-CN... 2010-5-24
动轮廓公
差和偏差
Page 7 of 97
/translate_c?hl=zh-CN&langpair=en%7Czh-CN... 2010-5-24
DIN标准列表 - 维基百科，自由的百科全书
Page 8 of 97
线程运行
■ 4 依据DIN 20000按DIN 29999 ■ 依据DIN 24000 4.1 根据DIN 24999
/translate_c?hl=zh-CN&langpair=en%7Czh-CN... 2010-5-24
DIN标准列表 - 维基百科，自由的百科全书
据DIN ISO 5456-2 ，
国际标准化组织5456-2 ，
根据DIN ISO 5456-3 ，根国际标准化组织5456-3 ，
据DIN ISO 5456-4
国际标准化组织5456-4
根据DIN ISO 10209-2
国际标准化组织10209-2
根据DIN ISO 128 ，通过 DIN EN ISO 128
依据DIN 1321
细牙螺纹标称尺寸标称直径从130毫米到1000 毫米
国际标准化组织的一般用途米制螺纹 - 第12部分：1至活跃 300毫米直径粗，细牙螺纹选择直径和间距

中外紧固件对照表

德国标准和国际标准、中国标准中英文对照表发布日期：2007-03-14 浏览次数：829德国标准和国际标准、中国标准中英文对照表序号德国标准中文品名英文品名国际标准中国标准Item DIN-Standard Description in Chinese Description in English ISO-Standard GB-Standard 1DIN1圆锥销taper pins ISO2339GB117 2DIN7圆柱销parallel pins ISO2338GB119-86 3DIN84开槽圆柱头螺钉slotted cheese head screws ISO1207GB65-85 4DIN85开槽盘头螺钉slotted pan head screws ISO1580GB67-85 5DIN93单耳止动垫圈tab washers GB854 6DIN94开口销split cotter pins ISO1234GB91 7DIN95开槽半沉头木螺钉slotted raised csk head wood screws GB101 8DIN96开槽半圆头木螺钉slotted round head wood screws GB99 9DIN97开槽沉头木螺钉slotted countersunk head wood screws GB100 10DIN125-A平垫plain washers ISO7089GB97.1-85 11DIN125-B平垫(带倒角)mediun washers ISO7090GB97.2-85 12DIN126平垫plain washers ISO709113DIN127-A重型弹垫spring lock washers,tang ends GB7244 14DIN127-B标准弹垫spring lock washers,square ends GB93-87 15DIN128-A鞍形弹垫single coil spring lock washers GB7245-87 16DIN137-A弹簧止动垫圈curved spring washers17DIN137-B波形弹垫wave spring washers GB955 18DIN186T型方颈螺栓T-head bolts with square neck GB37-88 19DIN188T型双接头螺栓T-head bolts with double nip20DIN258螺纹圆锥销taper pins with threaded end ISO873721DIN261T型头螺栓T-head bolts22DIN315AF蝶型螺母(美制)wing nuts amercia form23DIN315DF蝶型螺母(德制)wing nuts germany form GB62-88 24DIN316AF蝶型螺钉(美制)wing screws amercia form25DIN317DF蝶型螺钉(德制)wing screws germany form26DIN319圆球型盖型螺母ball knobs27DIN404开槽带孔球面圆柱头螺钉slotted capstan screws GB832-88 28DIN417开槽长圆柱端紧定螺钉slotted set srews with full dog point ISO7435GB75-85 29DIN427开槽平端紧定螺钉(半牙)slotted set srews with chamfered end ISO2342GB73-85 30DIN431小六角特薄细牙螺母pipe nuts with thread GB808-88 31DIN432外舌止动垫圈external tap GB856-88 32DIN433小垫圈(用于圆柱头螺钉)washers for cheese head screws ISO7092GB848-95 33DIN434方斜垫圈(U型)square taper washers for U-section GB852-88 34DIN435方斜垫圈(I型)square taper washers for I-sections GB852-88 35DIN436方垫圈square washers36DIN438开槽凹端紧定螺钉slotted set with cup point ISO7436GB74-85 37DIN439六角薄螺母hexagon thin nuts ISO4035GB6172-86 38DIN439细牙六角薄螺母hexagon thin nuts ISO8675GB6173-86 39DIN440木螺钉专用垫圈rounds washers for wood constructions ISO709440DIN443密封帽sealing caps,push-in type41DIN444活节螺栓B 型eye bolts form B GB798-88 42DIN462内舌止动垫圈internal tab washers43DIN463双耳止动垫圈washers with two taps GB855-88 44DIN464滚花高头螺钉knurled thumb screws with collar GB834-88 45DIN465开槽滚花高头螺钉slotted knurled thumb screws with collar46DIN466滚花高螺母knurled thumb nuts with collar GB806-88 47DIN467滚花薄螺母knurled thumb thin nuts GB807-88 48DIN470锁紧垫圈sealing washers49DIN471轴用弹性挡圈retaining rings for shafts(external),circlips GB894.1-86 50DIN472孔用弹性挡圈retaining rings for bores(internal),circlips GB893.1-86 51DIN478方头带垫螺栓square head bolts with collar52DIN479方头圆柱底端螺栓square head bolts with half dog point53DIN480方头带垫半圆底端螺栓square head bolts with collar,half dog point and rounded end54DIN508T型槽螺母T-slot nuts ISO29955DIN525单头螺柱single end studs56DIN529地脚螺栓masonry bolts GB799-88 57DIN546带槽圆螺母slotted round nuts GB817-7658DIN547端面带孔圆螺母round nuts with drilled holes in one face GB815-88 59DIN551开槽平端紧定螺钉slotted sit screws with flat point ISO4776GB73-85 60DIN553开槽锥端紧定螺钉slotted set screws with cone point ISO7434GB71-85 61DIN555六角螺母hexagon nuts ISO403462DIN557方螺母-C square nuts GB39-88 63DIN558六角头螺钉hexagon screws ISO401864DIN561六角头圆柱端紧定螺钉hexagon set screws with full dog point65DIN562薄型方螺母-B square nuts without bevel(pressed nuts)66DIN571六角头木螺钉hexagon head wood screws (coach screws)GB102-86 67DIN580吊环螺钉lifting eye bolts ISO3266GB825-76 68DIN582吊环螺母lifting eye nuts69DIN601六角头螺栓hexagon bolts ISO401670DIN603大半圆头方颈螺栓(马车螺栓)mushroom head square neck bolts (carriagebolts)ISO8677GB14-8871DIN604沉头带插销马车螺栓flat countersunk nib bolts72DIN605沉头长方颈马车螺栓flat countersunk long square neck bolts73DIN607半圆头带插销马车螺栓cup head nib bolts74DIN608沉头短方颈马车螺栓flat countersunk short square neck bolts75DIN609六角头精配螺栓（长螺纹）hexagon fitted bolts,long thread76DIN610六角头精配螺栓（短螺纹）hexagon fitted bolts,short thread77DIN653滚花平头螺钉knurled thumb screws thin type GB835-88 78DIN660半圆头铆钉round head rivets ISO1051GB867-86 79DIN661沉头铆钉contersunk head rivets ISO1051GB869-86 80DIN662半沉头铆钉raised contersunk head rivets ISO105181DIN674大扁头铆钉mushroom head rivets ISO105182DIN703重型侧面带孔圆螺母adjusting rings,heavy range (shafting collars)83DIN705侧面带孔圆螺母adjusting rings,light range (shafting collars)GB816-88 84DIN741卡头wire rope clips85DIN787T型槽螺钉T-slot screws ISO29986DIN835双头螺柱（牙长=2D）studs-metal (end=2d)GB900-88 87DIN906内六角锥型闭锁螺钉hexagon socket pipe plugs,conical thread88DIN908内六角直型闭锁螺钉hexagon socket screw plugs,cyl. thread89DIN909外六角锥型闭锁螺钉hexagon head pipe plugs,conical thread90DIN910外六角直型闭锁螺钉hexagon head screw plugs,cyl.thread91DIN911内六角扳手socket wrenches ISO293692DIN912内六角圆柱头螺钉hexagon socket cap screws ISO4762GB70-8593DIN913内六角平端紧定螺钉hexagon socket set screws with flat point ISO4026GB77-8594DIN914内六角尖端紧定螺钉hexagon socket set screws with cone point ISO4027GB78-8595DIN915内六角圆柱端紧定螺钉hexagon socket set screws with dog point ISO4028GB79-8596DIN916内六角凹端紧定螺钉hexagon socket set screws with cup point ISO4029GB80-8597DIN917薄型盲螺母hexagon cap nuts98DIN920开槽小圆柱头螺钉slotted short cheese head screws99DIN921开槽大圆柱头螺钉slotted large cheese head screws GB838-88 100DIN923开槽圆柱头轴肩螺钉slotted pan head screws with shoulder GB830-88 101DIN927开槽无头轴肩螺钉slotted shoulder screws102DIN928焊接方螺母square weld nuts GB/T13680-92 103DIN929焊接六角螺母hexagon weld nuts GB/T13681-92 104DIN931六角头螺栓（半牙）hexagon head screws ISO4014GB5782-86 105DIN933六角头螺栓（全牙）hexagon head screws ISO4017GB5783-86 106DIN934六角头螺母(1型)hexagon full nuts ISO4032GB6170-86 107DIN934细牙六角头螺母(1型)hexagon full nuts ISO8673GB6171-86 108DIN935开槽六角螺母hexagon slotted and castle nuts ISO7035GB6178-86 109DIN936六角头薄螺母hexagon thin nuts ISO4035GB6172.1-86 110DIN937六角头开槽薄螺母hexagon thin slotted and castle nuts ISO7038GB6181-86 111DIN938双头螺距（牙长=1D）studs metal (end=1d)GB897-88 112DIN939双头螺距（牙长=1.25D）studs metal (end=1.25d)GB898-88 113DIN940双头螺距（牙长=1.5D）studs metal (end=1.5d)114DIN960六角头细牙螺栓（半牙）hexagon head bolts,metric fine pitch thread ISO8765GB5785-86 115DIN961六角头细牙螺栓（全牙）hexagon head bolts,metric fine pitch thread ISO8676GB5786-86 116DIN962头部穿孔六角头螺栓additional shapes and versions for bolts117DIN963开槽沉头螺钉slotted countersund head screws ISO 2009GB68-85118DIN964开槽半沉头螺钉slotted raised countersunk oval head screws ISO 2010GB69-85119DIN965十字槽沉头螺钉cross recessed countersunk head screws ISO7046GB819-85 120DIN966十字槽半沉头螺钉cross recessed raised countersunk head screws ISO7047GB820-85121DIN970六角头螺母hexagon nuts type-1122DIN971六角头螺母hexagon nuts type-2123DIN972细牙六角头螺母(2型)hexagon nuts with fine thread ISO8674GB6176-86 124DIN975牙条(全螺纹)threaded rods(studdings)GB15389-94 125DIN976螺纹销threaded pins(stud bolts)126DIN979六角头开槽薄螺母（2型）hexagon thin slotted and castle nuts127DIN980全金属六角锁紧螺母（1型）prevailling torque type hexagon nuts,all metallnutsISO7199GB6184-86128DIN981圆螺母locknuts ISO2982GB812-88129DIN982六角头尼龙锁紧螺母prevailling torque type hexagon nuts,heavy type,with nylon insertISO7040GB889.1-86130DIN985六角头薄型尼龙锁紧螺母prevailling torque type hexagon nuts,heavy type,with nylon insertISO10511GB6172.2-86131DIN986六角盖型尼龙锁紧螺母prevailling torque typedomed capnuts with nylon insert132DIN988配合垫片shim rings133DIN1052木材连接用垫片washers for timber connectors134DIN1151沉头钢钉round plain head nails135DIN1440销钉专用垫片A型plain washers for clevis pins(A型)ISO8738136DIN1441销钉专用垫片plain washers for clevis pins137DIN1444带头销钉clevis pins with head ISO2341138DIN1471圆锥型槽销grooved pins,taper grooved ISO8744GB/T13829.2 139DIN1472圆锥型槽销(半槽)grooved pins,taper grooved half length ISO8745GB/T13829.2 140DIN1473平行槽销(带倒角)grooved pins,parallel grooved full length ISO8740141DIN1474前端凹槽槽销grooved pins,reserve grooved half length ISO8741142DIN1475中部凹槽槽销grooved pins,centre grooved ISO8742143DIN1476圆头槽销grooved pins with round head ISO8746GB/T13829.3 144DIN1477沉头槽销grooved pins with countersunk head ISO8747145DIN1479六角螺母棒turnuckles(centre parts),made out of hexagon bar146DIN1480花篮螺栓turnuckles with eye bolt and hook bolt147DIN1481弹性圆柱销spring pins,heavy type ISO8752GB879-86 148DIN1587组合式盖型螺母hexagon domed cap nuts GB802-88 149DIN1804开槽圆螺母（配合沟头扳手）slotted round nuts for hook spanner150DIN1816圆螺母（带插销孔）round nuts with set holes151DIN2093盘型弹簧垫圈disc springs152DIN3017喉箍hose clamps153DIN3404润滑油嘴（旋扭头）lubricating nipples,button head154DIN3567管夹shackles for conduilts155DIN3570U型螺栓stirrup bolts(U-bolts)156DIN6319球面垫圈spherical washers,conical seats GB849-88157DIN6325圆柱销parallel pins ISO8734158DIN6330厚六角螺母hexagon nuts ,1.5d GB56-88159DIN6331厚六角法兰面螺母hexagon nuts ,1.5d with collar GB6177-86 160DIN6334长六角螺母hexagon nuts ,3d161DIN6797-A外齿锁紧垫圈external teeth lock washers GB862.1-87 162DIN6797-I内齿锁紧垫圈internal teeth lock washers GB861.1-87 163DIN6798-A外锯齿锁紧垫圈external teeth serrated lock washers GB862.2-87 164DIN6798-I内锯齿锁紧垫圈internal teeth serrated lock washers GB861.2-87 165DIN6799开口挡圈retaining rings for shafts(E-rings),circlips GB896-76166DIN6885平键（A型）parallel keys(form A )ISO773/2491167DIN6888半圆键woodruff keys ISO3912168DIN6899嵌环（支撑环）thimbles169DIN6900机器螺钉和垫圈组合件screws and washers assemblies GB9074.1-.17 170DIN6901自攻螺钉和垫圈组合件tapping screws and washers assemblies GB9074.18-.23171DIN6912薄型带孔内六角圆柱头螺钉hexagon socket head cap screws with hole,low head172DIN6914大六角头螺栓hexagon head bolts with large head(friction grip bolts)173DIN6915大六角螺母hexagon nuts with large wideth across flat(friction grip nuts)174DIN6916大垫圈round washers for friction grip bolts175DIN6917楔型方垫圈spuare taper washers for friction grip bolts on T-sections176DIN6923六角法兰面螺母hexagon flange nuts ISO4161GB6177-86177DIN6925全金属六角锁紧螺母(2型）prevailing torque type hexagon nuts,all metallicnutsISO7042GB6185.1-2000178DIN7337开口型抽芯铆钉（沉头、扁圆头）blind rivets GB12617/12618179DIN7338扁平头半空心/全空心铆钉rivets for brake and clutch lining GB875/975-86 180DIN7343螺旋夹紧销spiral pins ISO8750181DIN7346轻型弹性圆柱销spring pins,light type ISO13337182DIN7349重型弹性圆柱销用垫圈washers for bolts with heavy type spring pinss183DIN7500ISO公制螺纹螺钉(多种头型)threadforming screws for ISO-metric thread184DIN7504自攻自钻螺钉(多种头型)self-drilling tapping screws185DIN7513开槽切削螺纹螺钉(多种头型)thread cutting screws186DIN7516十字槽切削螺纹螺钉(多种头型)thread cutting screws cross recess187DIN7965T型四爪螺母tee nuts with pronge188DIN7968钢结构用六角头螺栓连接副hexagon head fitted bolts for steel structures GB1228/1229/1230 189DIN7971开槽盘头自攻螺钉pan head tapping screws with slot ISO1481GB5282-85190DIN7972开槽沉头自攻螺钉countersunk flat head tapping screws with slot ISO1482GB5283-85191DIN7973开槽半沉头自攻螺钉raised countersunk oval head tapping screws withslotISO1483GB5284-85192DIN7976六角头自攻螺钉hexagon tapping screws ISO1479GB5285-85193DIN7980圆柱头螺钉用弹簧垫圈spring lock washers for screws with cylindricalheadsISO8738194DIN7981十字槽盘头自攻螺钉pan head tapping screws with cross recessed ISO 7049GB845-85195DIN7982十字槽沉头自攻螺钉countersunk flat head tapping screws with crossrecessedISO7050GB846-85196DIN7983十字槽半沉头自攻螺钉raised countersunk oval head tapping screws withcross recessedISO7051GB847-86197DIN7984薄型内六角圆柱头螺钉hexagon socket head cap screws with，reduced head198DIN7985十字槽盘头螺钉pan head screws with cross recessed ISO7045GB818-85199DIN7989钢结构用垫圈washers for steel structures GB1230-84 200DIN7990钢结构用六角头螺栓hexagon head bolts for steel structures GB1229-84 201DIN7991内六角沉头螺钉hexagon socket countersunk head screws ISO10642GB/T70.3-2000 202DIN7993轴用钢丝挡圈roundwire snap rings for shafts GB895.2-86203DIN7995十字槽半沉头木螺钉cross recessed raised countersunk head woodscrewsGB952-86204DIN7996十字槽圆头木螺钉cross recessed round head wood screws GB950-86205DIN7997十字槽沉头木螺钉cross recessed countersunk head wood screws GB951-86 206DIN8140螺纹护套（普通\自锁等）ciol inserts,coarse,fine thread,silf locking207DIN9021大外径垫圈washers,outside diameter appro.3d ISO7093GB96-85 208DIN11024弹簧卡子spring cotter for a bolt209DIN13257平板螺栓belting bolts (elevator bolts)210DIN18182干壁钉（墙板钉）dry wall screws211DIN28129环型螺母lifting nuts(eye nuts)GB63-88 212DIN70952圆螺母用止退垫圈tab washers for slotted round nuts GB858-88。

韦氏硬度计

-6-
韦氏硬度计使用说明书
时代欧普

八、维护与保养
本仪器属于精密仪器，其使用寿命主要决定于使用方法是否正确及维护保养是否及时妥善。使用中应注意以下诸点：
1. 防污损仪器在使用中应经常用软布擦拭，除去附着在仪器表面上，特别是砧
座和套筒支承面上的灰尘和污物，特别要防止从表盘缝隙或压针周围进入污物，从上述部位大量进入污物后会影响测量精度或造成故障。
合。如检查结果与上述三点其一不符，请参照本说明书仪器校
正方法进行校正或来电垂询。客服电话：0317-8801380
特别提示：仪器砧座与压针具有相同硬度，空打次数过多会加速压针
磨损或造成砧座损坏。
时代欧普检测仪器有限公司
TIMES OUPU INSTRUMENT CO.,LTD 地址：河北省沧州市交通大街11号电话：0317-3038768 8801380 传真：0317-3168768 邮编：061000 E-mail:oupu@
在不使用试样的条件下，轻轻压下手柄，直到压针套筒落到砧座上。压紧手柄，施加足够的压力，用小螺丝刀调整位于表头顶部的满刻度调节螺钉，如图 3 所示，直到指针指到满刻度20 为止（精确到±0.5HW），然后放开手柄。
-3-
时代欧普

韦氏硬度计使用说明书
满刻度调节螺钉
剂除掉涂层之后再进行硬度测量。
7. 操作操作不当会影响测量精度。 7.1. 使用中应注意经常检查仪器的准确性，核对仪器满度点
（20HW）和校准点（5 或17HW）是否失准。发现不准应及时校正。 7.2. 测量时试样表面应与压针垂直，试样底部应与砧座线接触，否则
将会产生误差。 7.3. 测试时应一次施加足够握力，缓慢加力将造成测量值偏低。 7.4. 在测试过程中，应避免试样扭动，否则将造成误差并损坏压针。

德标和国标,国际标准中英文对照表

德标和国标,国际标准中英文对照表德标和国标,国际标准中英文对照表序号德国标准中文品名英文品名国际标准中国标准Item DIN-Standard Description in Chinese Description in English ISO-Standard GB-Standard1 DIN1 圆锥销taper pins ISO2339 GB1172 DIN7 圆柱销parallel pins ISO2338 GB119-863 DIN84 开槽圆柱头螺钉slotted cheese head screws ISO1207 GB65-854 DIN85 开槽盘头螺钉slotted pan head screws ISO1580 GB67-855 DIN93 单耳止动垫圈tab washers GB8546 DIN94 开口销split cotter pins ISO1234 GB917 DIN95 开槽半沉头木螺钉slotted raised csk head wood screws GB1018 DIN96 开槽半圆头木螺钉slotted round head wood screws GB999 DIN97 开槽沉头木螺钉slotted countersunk head wood screws GB10010 DIN125-A 平垫plain washers ISO7089 GB97.1-8511 DIN125-B 平垫(带倒角) mediun washers ISO7090 GB97.2-8512 DIN126 平垫plain washers ISO709113 DIN127-A 重型弹垫spring lock washers,tang ends GB724414 DIN127-B 标准弹垫spring lock washers,square ends GB93-8715 DIN128-A 鞍形弹垫single coil spring lock washers GB7245-8716 DIN137-A 弹簧止动垫圈curved spring washers17 DIN137-B 波形弹垫wave spring washers GB95518 DIN186 T型方颈螺栓T-head bolts with square neck GB37-8819 DIN188 T型双接头螺栓T-head bolts with double nip20 DIN258 螺纹圆锥销taper pins with threaded end ISO873721 DIN261 T型头螺栓T-head bolts22 DIN315AF 蝶型螺母(美制) wing nuts amercia form23 DIN315DF 蝶型螺母(德制) wing nuts germany form GB62-8824 DIN316AF 蝶型螺钉(美制) wing screws amercia form25 DIN317DF 蝶型螺钉(德制) wing screws germany form26 DIN319 圆球型盖型螺母ball knobs27 DIN404 开槽带孔球面圆柱头螺钉slotted capstan screws GB832-8828 DIN417 开槽长圆柱端紧定螺钉slotted set srews with full dog point ISO7435 GB75-8529 DIN427 开槽平端紧定螺钉(半牙) slotted set srews with chamfered end ISO2342 GB73-8530 DIN431 小六角特薄细牙螺母pipe nuts with thread GB808-8831 DIN432 外舌止动垫圈external tap GB856-8832 DIN433 小垫圈(用于圆柱头螺钉) washers for cheese head screws ISO7092 GB848-9533 DIN434 方斜垫圈(U型) square taper washers for U-section GB852-8834 DIN435 方斜垫圈(I型) square taper washers for I-sections GB852-8835 DIN436 方垫圈square washers36 DIN438 开槽凹端紧定螺钉slotted set with cup pointISO7436 GB74-8537 DIN439 六角薄螺母hexagon thin nuts ISO4035 GB6172-8638 DIN439 细牙六角薄螺母hexagon thin nuts ISO8675 GB6173-8639 DIN440 木螺钉专用垫圈rounds washers for wood constructions ISO709440 DIN443 密封帽sealing caps,push-in type41 DIN444 活节螺栓B 型eye bolts form B GB798-8842 DIN462 内舌止动垫圈internal tab washers43 DIN463 双耳止动垫圈washers with two taps GB855-8844 DIN464 滚花高头螺钉knurled thumb screws with collar GB834-8845 DIN465 开槽滚花高头螺钉slotted knurled thumb screws with collar46 DIN466 滚花高螺母knurled thumb nuts with collar GB806-8847 DIN467 滚花薄螺母knurled thumb thin nuts GB807-8848 DIN470 锁紧垫圈sealing washers49 DIN471 轴用弹性挡圈retaining rings for shafts(external),circlips GB894.1-8650 DIN472 孔用弹性挡圈retaining rings for bores(internal),circlips GB893.1-8651 DIN478 方头带垫螺栓square head bolts with collar52 DIN479 方头圆柱底端螺栓square head bolts with half dog point53 DIN480 方头带垫半圆底端螺栓square head bolts with collar,half dog point and rounded end54 DIN508 T型槽螺母T-slot nuts ISO29955 DIN525 单头螺柱single end studs56 DIN529 地脚螺栓masonry bolts GB799-8857 DIN546 带槽圆螺母slotted round nuts GB817-7658 DIN547 端面带孔圆螺母round nuts with drilled holes in one face GB815-8859 DIN551 开槽平端紧定螺钉slotted sit screws with flat point ISO4776 GB73-8560 DIN553 开槽锥端紧定螺钉slotted set screws with cone point ISO7434 GB71-8561 DIN555 六角螺母hexagon nuts ISO403462 DIN557 方螺母-C square nuts GB39-8863 DIN558 六角头螺钉hexagon screws ISO401864 DIN561 六角头圆柱端紧定螺钉hexagon set screws with full dog point65 DIN562 薄型方螺母-B square nuts without bevel(pressed nuts)66 DIN571 六角头木螺钉hexagon head wood screws (coach screws) GB102-8667 DIN580 吊环螺钉lifting eye bolts ISO3266 GB825-7668 DIN582 吊环螺母lifting eye nuts69 DIN601 六角头螺栓hexagon bolts ISO401670 DIN603 大半圆头方颈螺栓(马车螺栓) mushroom head square neck bolts (carriage bolts) ISO8677 GB14-8871 DIN604 沉头带插销马车螺栓flat countersunk nib bolts72 DIN605 沉头长方颈马车螺栓flat countersunk long square neck bolts73 DIN607 半圆头带插销马车螺栓cup head nib bolts74 DIN608 沉头短方颈马车螺栓flat countersunk short square neck bolts75 DIN609 六角头精配螺栓（长螺纹）hexagon fitted bolts,long thread76 DIN610 六角头精配螺栓（短螺纹）hexagon fitted bolts,short thread77 DIN653 滚花平头螺钉knurled thumb screws thin type GB835-8878 DIN660 半圆头铆钉round head rivets ISO1051 GB867-8679 DIN661 沉头铆钉contersunk head rivets ISO1051 GB869-8680 DIN662 半沉头铆钉raised contersunk head rivets ISO105181 DIN674 大扁头铆钉mushroom head rivets ISO105182 DIN703 重型侧面带孔圆螺母adjusting rings,heavy range (shafting collars)83 DIN705 侧面带孔圆螺母adjusting rings,light range (shafting collars) GB816-8884 DIN741 卡头wire rope clips85 DIN787 T型槽螺钉T-slot screws ISO29986 DIN835 双头螺柱（牙长=2D）studs-metal (end=2d) GB900-8887 DIN906 内六角锥型闭锁螺钉hexagon socket pipe plugs,conical thread88 DIN908 内六角直型闭锁螺钉hexagon socket screw plugs,cyl. thread89 DIN909 外六角锥型闭锁螺钉hexagon head pipe plugs,conical thread90 DIN910 外六角直型闭锁螺钉hexagon head screw plugs,cyl.thread91 DIN911 内六角扳手socket wrenches ISO293692 DIN912 内六角圆柱头螺钉hexagon socket cap screws ISO4762 GB70-8593 DIN913 内六角平端紧定螺钉hexagon socket set screws with flat point ISO4026 GB77-8594 DIN914 内六角尖端紧定螺钉hexagon socket set screws with cone point ISO4027 GB78-8595 DIN915 内六角圆柱端紧定螺钉hexagon socket set screws with dog point ISO4028 GB79-8596 DIN916 内六角凹端紧定螺钉hexagon socket set screws with cup point ISO4029 GB80-8597 DIN917 薄型盲螺母hexagon cap nuts98 DIN920 开槽小圆柱头螺钉slotted short cheese head screws99 DIN921 开槽大圆柱头螺钉slotted large cheese head screws GB838-88100 DIN923 开槽圆柱头轴肩螺钉slotted pan head screws with shoulder GB830-88101 DIN927 开槽无头轴肩螺钉slotted shoulder screws102 DIN928 焊接方螺母square weld nuts GB/T13680-92103 DIN929 焊接六角螺母hexagon weld nuts GB/T13681-92 104 DIN931 六角头螺栓（半牙）hexagon head screws ISO4014 GB5782-86105 DIN933 六角头螺栓（全牙）hexagon head screws ISO4017 GB5783-86106 DIN934 六角头螺母(1型) hexagon full nuts ISO4032 GB6170-86107 DIN934 细牙六角头螺母(1型) hexagon full nuts ISO8673 GB6171-86108 DIN935 开槽六角螺母hexagon slotted and castle nuts ISO7035 GB6178-86109 DIN936 六角头薄螺母hexagon thin nuts ISO4035 GB6172.1-86110 DIN937 六角头开槽薄螺母hexagon thin slotted and castle nuts ISO7038 GB6181-86111 DIN938 双头螺距（牙长=1D）studs metal (end=1d) GB897-88112 DIN939 双头螺距（牙长=1.25D）studs metal (end=1.25d) GB898-88113 DIN940 双头螺距（牙长=1.5D）studs metal (end=1.5d) 114 DIN960 六角头细牙螺栓（半牙）hexagon head bolts,metric fine pitch thread ISO8765GB5785-86115 DIN961 六角头细牙螺栓（全牙）hexagon head bolts,metric fine pitch thread ISO8676GB5786-86116 DIN962 头部穿孔六角头螺栓additional shapes and versions for bolts117 DIN963 开槽沉头螺钉slotted countersund head screws ISO 2009 GB68-85118 DIN964 开槽半沉头螺钉slotted raised countersunk oval head screws ISO 2010 GB69-85119 DIN965 十字槽沉头螺钉cross recessed countersunk head screws ISO7046 GB819-85120 DIN966 十字槽半沉头螺钉cross recessed raised countersunk head screws ISO7047 GB820-85 121 DIN970 六角头螺母hexagon nuts type-1122 DIN971 六角头螺母hexagon nuts type-2123 DIN972 细牙六角头螺母(2型) hexagon nuts with fine thread ISO8674 GB6176-86124 DIN975 牙条(全螺纹) threaded rods(studdings) GB15389-94125 DIN976 螺纹销threaded pins(stud bolts)126 DIN979 六角头开槽薄螺母（2型）hexagon thin slotted and castle nuts127 DIN980 全金属六角锁紧螺母（1型）prevailling torque type hexagon nuts,all metall nuts ISO7199 GB6184-86 128 DIN981 圆螺母locknuts ISO2982 GB812-88129 DIN982 六角头尼龙锁紧螺母prevailling torque type hexagon nuts,heavy type ,with nylon insert ISO7040 GB889.1-86 130 DIN985 六角头薄型尼龙锁紧螺母prevailling torque type hexagon nuts,heavy type ,with nylon insert ISO10511 GB6172.2-86131 DIN986 六角盖型尼龙锁紧螺母prevailling torque typedomed capnuts with nylon insert132 DIN988 配合垫片shim rings133 DIN1052 木材连接用垫片washers for timber connectors 134 DIN1151 沉头钢钉round plain head nails135 DIN1440 销钉专用垫片A型plain washers for clevis pins(A 型) ISO8738136 DIN1441 销钉专用垫片plain washers for clevis pins137 DIN1444 带头销钉clevis pins with head ISO2341138 DIN1471 圆锥型槽销grooved pins,taper grooved ISO8744 GB/T13829.2139 DIN1472 圆锥型槽销(半槽) grooved pins,taper grooved half length ISO8745 GB/T13829.2140 DIN1473 平行槽销(带倒角) grooved pins,parallel grooved full length ISO8740141 DIN1474 前端凹槽槽销grooved pins,reserve grooved half length ISO8741142 DIN1475 中部凹槽槽销grooved pins,centre grooved ISO8742143 DIN1476 圆头槽销grooved pins with round head ISO8746 GB/T13829.3144 DIN1477 沉头槽销grooved pins with countersunk headISO8747145 DIN1479 六角螺母棒turnuckles(centre parts),made out of hexagon bar146 DIN1480 花篮螺栓turnuckles with eye bolt and hook bolt 147 DIN1481 弹性圆柱销spring pins,heavy type ISO8752 GB879-86148 DIN1587 组合式盖型螺母hexagon domed cap nuts GB802-88149 DIN1804 开槽圆螺母（配合沟头扳手）slotted round nuts for hook spanner150 DIN1816 圆螺母（带插销孔）round nuts with set holes 151 DIN2093 盘型弹簧垫圈disc springs152 DIN3017 喉箍hose clamps153 DIN3404 润滑油嘴（旋扭头）lubricating nipples,button head154 DIN3567 管夹shackles for conduilts155 DIN3570 U型螺栓stirrup bolts(U-bolts)156 DIN6319 球面垫圈spherical washers,conical seats GB849-88157 DIN6325 圆柱销parallel pins ISO8734158 DIN6330 厚六角螺母hexagon nuts ,1.5d GB56-88159 DIN6331 厚六角法兰面螺母hexagon nuts ,1.5d with collar GB6177-86160 DIN6334 长六角螺母hexagon nuts ,3d161 DIN6797-A 外齿锁紧垫圈external teeth lock washers GB862.1-87162 DIN6797-I 内齿锁紧垫圈internal teeth lock washers GB861.1-87163 DIN6798-A 外锯齿锁紧垫圈external teeth serrated lock washers GB862.2-87164 DIN6798-I 内锯齿锁紧垫圈internal teeth serrated lock washers GB861.2-87165 DIN6799 开口挡圈retaining rings for shafts(E-rings),circlips GB896-76166 DIN6885 平键（A型）parallel keys(form A ) ISO773/2491 167 DIN6888 半圆键woodruff keys ISO3912168 DIN6899 嵌环（支撑环）thimbles169 DIN6900 机器螺钉和垫圈组合件screws and washers assemblies GB9074.1-.17170 DIN6901 自攻螺钉和垫圈组合件tapping screws and washers assemblies GB9074.18-.23171 DIN6912 薄型带孔内六角圆柱头螺钉hexagon socket head cap screws with hole,low head172 DIN6914 大六角头螺栓hexagon head bolts with large head(friction grip bolts)173 DIN6915 大六角螺母hexagon nuts with large wideth across flat(friction grip nuts)174 DIN6916 大垫圈round washers for friction grip bolts175 DIN6917 楔型方垫圈spuare taper washers for friction grip bolts on T-sections176 DIN6923 六角法兰面螺母hexagon flange nuts ISO4161 GB6177-86177 DIN6925 全金属六角锁紧螺母(2型）prevailing torque type hexagon nuts,all metallic nutsISO7042 GB6185.1-2000178 DIN7337 开口型抽芯铆钉（沉头、扁圆头）blind rivets GB12617/12618179 DIN7338 扁平头半空心/全空心铆钉rivets for brake and clutch lining GB875/975-86180 DIN7343 螺旋夹紧销spiral pins ISO8750181 DIN7346 轻型弹性圆柱销spring pins,light type ISO13337 182 DIN7349 重型弹性圆柱销用垫圈washers for bolts with heavy type spring pinss183 DIN7500 ISO公制螺纹螺钉(多种头型) threadforming screws for ISO-metric thread184 DIN7504 自攻自钻螺钉(多种头型) self-drilling tapping screws185 DIN7513 开槽切削螺纹螺钉(多种头型) thread cutting screws186 DIN7516 十字槽切削螺纹螺钉(多种头型) thread cutting screws cross recess187 DIN7965 T型四爪螺母tee nuts with pronge188 DIN7968 钢结构用六角头螺栓连接副hexagon head fitted bolts for steel structuresGB1228/1229/1230189 DIN7971 开槽盘头自攻螺钉pan head tapping screws with slot ISO1481 GB5282-85190 DIN7972 开槽沉头自攻螺钉countersunk flat head tapping screws with slot ISO1482GB5283-85191 DIN7973 开槽半沉头自攻螺钉raised countersunk oval head tapping screws with slot ISO1483 GB5284-85192 DIN7976 六角头自攻螺钉hexagon tapping screws ISO1479 GB5285-85193 DIN7980 圆柱头螺钉用弹簧垫圈spring lock washers for screws with cylindrical heads ISO8738 194 DIN7981 十字槽盘头自攻螺钉pan head tapping screws with cross recessed ISO 7049 GB845-85195 DIN7982 十字槽沉头自攻螺钉countersunk flat head tapping screws with cross recessedISO7050 GB846-85196 DIN7983 十字槽半沉头自攻螺钉raised countersunk oval head tapping screws with cross recessed ISO7051 GB847-86 197 DIN7984 薄型内六角圆柱头螺钉hexagon socket head cap screws with，reduced head198 DIN7985 十字槽盘头螺钉pan head screws with cross recessed ISO7045 GB818-85199 DIN7989 钢结构用垫圈washers for steel structures GB1230-84200 DIN7990 钢结构用六角头螺栓hexagon head bolts for steel structures GB1229-84201 DIN7991 内六角沉头螺钉hexagon socket countersunk head screws ISO10642202 DIN7993 轴用钢丝挡圈roundwire snap rings for shafts GB895.2-86203 DIN7995 十字槽半沉头木螺钉cross recessed raised countersunk head wood screws GB952-86204 DIN7996 十字槽圆头木螺钉cross recessed round head wood screws GB950-86205 DIN7997 十字槽沉头木螺钉cross recessed countersunk head wood screws GB951-86 206 DIN8140 螺纹护套（普通\自锁等）ciol inserts,coarse,fine thread,silf locking207 DIN9021 大外径垫圈washers,outside diameter appro.3d ISO7093 GB96-85208 DIN11024 弹簧卡子spring cotter for a bolt209 DIN13257 平板螺栓belting bolts (elevator bolts)210 DIN18182 干壁钉（墙板钉）dry wall screws211 DIN28129 环型螺母lifting nuts(eye nuts) GB63-88212 DIN70952 圆螺母用止退垫圈tab washers for slotted round nuts GB858-88。

中华人民共和国国家标准油脂工业名词术语GBT8873-88Terminology

中华人民共和国国家标准油脂工业名词术语 GB/T 8873-88Terminology of oils and fats industry━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━本标准规定了油脂工业的名词术语，适用于生产、教学、科研及其它有关领域。

1预处理Pretreatment油料进入榨油机（或浸出器）之前所进行加工的一系列工序的总称。

1.1清理cleaning除去油料中所含杂质的工序的总称。

1.1.1筛选screening separation利用油料与杂质之间粒度（宽度、厚度、长度）的差别，借助筛孔分离杂质的方法。

1.1.2风选aspiration, air-classification利用油料与杂质之间悬浮速度的差别，借助风力除杂的方法。

1.1.3磁选magnetic separation利用磁力清除油料中磁性金属杂质的方法。

1.1.4水选washing亦称“水洗”。

用水除去油料中的泥土及其它杂质的方法。

1.1.5并肩泥的清选removal of mud balls, same-size with oilseeds亦称“去并肩泥”。

利用机械力将大小与油料种子相似的泥块粉碎，再用筛选或风选清除的方法。

1.1.6六角筛hexagonal reel筛体为卧式截锥形六梭柱，进料端较出料端为小，绕柱轴旋转的筛选机械。

1.1.7多联打筛multiple hull beater筛底由若干个固定半圆筛网组成，每个半圆筛网上方的轴上均装有打棒，用于棉籽壳仁分离的筛选机械。

1.1.8圆筒打筛hull beater亦称“圆打筛”。

旋转轴上装有打棒、轴与筛筒以不同的转速和方向转动的圆筛。

1.1.9吸风平筛aspirated plansifter筛选和风选结合的联合清选机械。

1.1.10风选器aspirator利用风力使油料与杂质分离的装置。

1.1.11磁选装置magnetic separator清除原料中磁性杂质的装置。

3680系列精密潜入杆电阻器产品说明书

*RoHS Directive 2002/95/EC Jan 27 2003 including AnnexSpecifications are subject to change without notice.Customers should verify actual device performance in their specific applications.Electrical Characteristics 1Standard Resistance Range .............................................................................10 ohms to 1 megohm Total Resistance Tolerance...........................................................................................................±3 %Dielectric Withstanding Voltage (MIL-STD-202, Method 301)Sea Level..........................................................................................................1,000 VAC minimum Power Rating (Voltage Limited By Power Dissipation or 500 VAC, Whichever is Less)+25 °C ...................................................................................................................................2 watts +85 °C......................................................................................................................................0 watt Insulation Resistance (500 VDC)..................................................................1,000 megohms minimum Resolution3681..........................................................................................................................................10 %3682............................................................................................................................................1 %3683.........................................................................................................................................0.1 %3684.......................................................................................................................................0.01 %3685.....................................................................................................................................0.001 %Absolute Minimum Resistance...............................3 ohms or 0.2 % maximum (whichever is greater)Accuracy (Dial Reading to Output Ratio)....................................................................±1.0 % full scaleEnvironmental Characteristics1Operating Temperature Range ...................................................................................-25 °C to +85 °C Storage Temperature Range.......................................................................................-25 °C to +85 °C Temperature Coefficient Over Storage Temperature Range...........................±100 ppm/°C maximum Vibration.........................................................................................................................................10 G Wiper Bounce...........................................................................................0.1 millisecond maximum Total Resistance Shift..............................................................................................±1 % maximum Voltage Ratio Shift................................................................................................±0.2 % maximum Shock.............................................................................................................................................50 G Wiper Bounce...........................................................................................0.1 millisecond maximum Total Resistance Shift..............................................................................................±1 % maximum Voltage Ratio Shift................................................................................................±0.2 % maximum Load Life...............................................................................................................1,000 hours, 2 watts Total Resistance Shift..............................................................................................±2 % maximum Rotational Life.........................................................................75,000 button operations each decade Total Resistance Shift..............................................................................................±2 % maximum IP Rating........................................................................................................................................IP 40Mechanical Characteristics 1Weight....................................3681 (9 gm); 3682 (16 gm); 3683 (23 gm); 3684 (30 gm); 3685 (37 gm)T erminals.....2.79 mm (0.11 in.) wide x .41 mm (.016 in.) thick, tinned solder lugs for 3 #20 AWG wires Soldering ConditionManual Soldering..........................................................96.5Sn/3.0Ag/0.5Cu solid wire or no-cleanrosin cored wire; 370 °C (700 °F) max. for 3 secondsWave Soldering....................96.5Sn/3.0Ag/0.5Cu solder with no-clean flux; 260 °C (500 °F) max.for 5 secondsWash processes..................................................................................................Not recommended Marking...............................Manufacturer’s name and part number, resistance value and date code.Ganging (Multiple Section Potentiometers)...............................................Up to 5 decades maximum Readout Marking........................................................................................................10 positions, 0-9Actuating Force...................................................................................19 to 29 oz. on detent decades Actuating Force Variation..............................................................................................4 oz. maximum1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.NOTE: Terminals 1 & 3 are reversed from illustration for models 3682 and 3684.3680INCR.Product DimensionsDimensionsWeight (Approx.)Model a b c d e –.381 (–.015)oz.gms.368116.51 (.650)14.99 (.590)—9.91 (.39) 4.19 (.165).3369.5368226.67 (1.05)25.15 (.99)10.67 (.42)11.94 (.47)8.38 (.330).57616.5368337.08 (1.46)35.31 (1.39)18.54 (.73)11.94 (.47) 4.19 (.165).82423.5368447.50 (1.87)45.47 (1.79)30.73 (1.21)11.94 (.47)8.38 (.330) 1.07230.5368557.66 (2.270)55.63 (2.190)39.12 (1.540)11.94 (.47)4.19 (.165)1.32037.5DimensionsModel f –.010 (–.254)g –.010 (–.254)368121.08 (.830)15.75 (.620)368221.08 (.830)25.91 (1.020)368321.08 (.830)36.07 (1.420)368421.08 (.830)46.23 (1.820)368521.08 (.830)56.39 (2.220)*Ro H S C O M P L I A N T V E R S I O N S A V A I L A B L ESpecifications are subject to change without notice.Customers should verify actual device performance in their specific applications.Recommended Part NumbersBOLDFACE LISTINGS ARE IN STOCK AND READILY AVAILABLE THROUGH DISTRIBUTION.FOR OTHER OPTIONS CONSULT FACTORY.RoHS IDENTIFIER:L =COMPLIANTBLANK =NON-COMPLIANTREV. 05/07。

DIN齿轮标准目录

DIN齿轮标准目录DIN 780-1:1977 齿轮的模数系列圆柱齿轮的模数DIN 780-2:1977 齿轮的模数系列圆柱蜗杆传动装置的模数DIN 781:1973 机床变速齿轮的齿数DIN 782:1976 机床变速齿轮•尺寸DIN 867:1986 圆柱齿轮渐开线齿条原始齿形DIN 868:1976 齿轮、齿轮副和齿轮传动机构的一般概念和规定值DIN 3960 Bb.1:1980 渐开线啮合的圆柱齿轮副和圆柱齿轮的概念和参数方程式一览表DIN 3960:1987 渐开线啮合的圆柱齿轮副和圆柱齿轮的概念和参数DIN 3961:1978 圆柱齿轮啮合公差基础DIN 3962-1:1978 圆柱齿轮啮合公差单一参数偏差的公差DIN 3962-2:1978 圆柱齿轮啮合公差齿线偏差的公差DIN 3962-3:1978 圆柱齿轮啮合公差节距偏差的公差DIN 3963:1978 圆柱齿轮啮合公差滚动偏差的公差DIN 3964:1980 圆柱齿轮箱的轴中心距偏差和轴位置公差DIN 3965-1:1986 伞齿轮啮合公差基本概念DIN 3965-2:1986 伞齿轮啮合公差各个参数值的公差DIN 3965-3:1986 伞齿轮啮合公差啮合公差DIN 3965-4:1986 伞齿轮啮合公差轴线夹角及轴线交叉点的公差DIN 3966-1:1978 图样中的啮合说明圆柱齿轮渐开线啮合的说明DIN 3966-2:1978 图样中的啮合说明直齿伞齿轮啮合的说明DIN 3966-3-1980 图样上啮合的说明蜗杆和蜗轮啮合的说明DIN 3967:1978 传动齿轮的配合体系侧隙•齿厚偏差•齿厚公差•基础DIN 3968:1960 渐开线正齿轮用单头滚铣刀的公差DIN 3969-1:1991 齿面粗糙度粗糙度参数•表面等级DIN 3970-1:1974 检查圆柱齿轮用的标准齿轮齿轮坯和啮合体系DIN 3970-2:1974 检查圆柱齿轮用的标准齿轮安装心轴DIN 3971:1980 伞齿轮和伞齿轮副的概念与参数值DIN 3972:1952 DIN 867渐开线齿轮的切齿刀具的参照齿形DIN 3974-1:1995 蜗轮传动的精度第1部分一般基础DIN 3974-2:1995 蜗轮传动的精度第2部分各个误差的公差DIN 3975-1:2002 轴交角90°的圆柱蜗轮传动装置的定义和参数第1部分蜗杆和蜗轮DIN 3975-2:2002 轴交角90°的圆柱蜗轮传动装置的定义和参数第2部分偏差DIN 3976:1980 圆柱形蜗杆尺寸、轴心距和蜗轮传动速比DIN 3977:1981 圆柱齿轮齿厚检验用半径或直径尺寸测量要素直径DIN 3978:1976 圆柱齿轮啮合的螺纹升角DIN 3979:1979 齿轮传动的轮齿损伤标志、特征和原因DIN 3990-1:1987 齿轮承载能力的计算引言和一般影响因素DIN 3990-2:1987 圆柱齿轮承载能力的计算耐点蚀计算DIN 3990-3:1987 齿轮承载能力的计算齿根承载能力计算DIN 3990-4:1987 圆柱齿轮承载能力的计算啮合承载能力的计算DIN 3990-5:1987 圆柱齿轮承载能力的计算疲劳限值和材料质量DIN 3990-6:1994 圆柱齿轮承载能力计算第6部分:工作强度计算DIN 3990-11:1989 圆柱齿轮承载能力的计算工业传动应用标准详细方法DIN 3990-21:1989 圆柱齿轮承载能力计算快速齿轮和类似要求齿轮的应用标准DIN 3990-31:1990 圆柱齿轮承载能力计算船用减速齿轮箱的应用标准DIN 3990-41:1990 圆柱齿轮承载能力计算汽车变速箱的使用标准DIN 3991-1:1988 非偏轴伞齿轮承载能力计算引言和一般影响因数DIN 3991-2:1988 非偏轴伞齿轮承载能力计算抗蚀能力计算DIN 3991-3:1988 非偏轴伞齿轮承载能力计算齿根载荷能力的计算DIN 3991-4:1988 非偏轴伞齿轮承载能力计算磨损载荷计算DIN 3992:1964 外啮合圆柱齿轮的齿廓变位DIN 3993-1:1981 渐开线啮合圆柱内齿轮副的几何设计基本规则DIN 3993-2:1981 渐开线啮合圆柱内齿轮副的几何设计小齿轮配合的几何极限DIN 3993-3:1981 渐开线啮合圆柱内齿轮副的几何设计齿顶高变位系数的图解图DIN 3993-4:1981 渐开线啮合圆柱内齿轮副的几何设计内齿轮型刀极限图示DIN 3994:1963 05啮合的直齿圆柱齿轮齿廓变位导言DIN 3996:1998 轴角Σ=90°的蜗轮对负载能力的计算DIN 3998-1:1976 齿轮和齿轮副的名称一般概念DIN 3998-2:1976 齿轮和齿轮副的名称圆柱齿轮和圆柱齿轮副DIN 3998-3:1976 齿轮和齿轮副的名称伞齿轮和伞齿轮副、双曲线齿轮和双曲线齿轮副DIN 3998-4:1976 齿轮和齿轮副的名称蜗轮副DIN 3998 Bb.1:1976 齿轮和齿轮副的名称关键词索引DIN 3999:1974 齿轮符号DIN 4000-27:1982 传动齿轮特性表DIN 4000-59:1987 齿条.齿轮.齿轮轴.伞轮轴.伞齿轮.伞齿轮轴.蜗杆.蜗轮的特性表DIN 4000-141:2005 特性表第141部分圆柱形齿轮用带孔或柄的滚刀DIN 45635-23:2003 机器噪声测量空气噪声发射包络面法第23部分齿轮变速器DIN 45635-55:1986 机器噪声测量空气噪声测量、包面法、磨擦轮和齿轮传动的调运车DIN 51354-1:1990 润滑剂检验在ＦＺＧ齿轮啮合测试机.一般工作原理DIN 51354-2:1990 润滑剂检验在ＦＺＧ齿轮啮合机.润滑油Ａ/８.３/９０测量法DIN 51509-1:1976 齿轮传动润滑剂的选择.润滑油DIN 5480- 1:2006 基本直径的渐开线花键第1部分：总则DIN 5480- 2:2006 基本直径的渐开线花键第2部分：公称尺寸和检查尺寸DIN 5480-15:2006 基本直径的渐开线花键第15部分：检验DIN 5480-16:2006 基本直径的渐开线花键第16部分：刀具DIN 5481:2005 花键轴DIN 5481-1:1952 锯齿孔和锯齿轴剖面DIN 5481-2:1956 内外锯齿形花键锯齿孔量规、量规尺寸DIN 5481-3:1965 锯齿孔和锯齿轴剖面锯齿轴的过端量规、量规尺寸DIN 5481-4:1955 锯齿孔和锯齿轴剖面锯齿轴的不过端量规、量规尺寸DIN 5481-5:1955 锯齿孔和锯齿轴剖面 DIN5481B1.2-4的说明DIN 58400:1984 精密机械渐开线圆柱齿轮基准齿形DIN 58405 Bb.1:1972 精密加工用正齿轮传动装置计算表格DIN 58405-1:1972 精密加工用正齿轮传动装置适用范围.概念.测定参数.分类DIN 58405-2:1972 精密加工用正齿轮传动装置传动机构配合的选择.公差.偏差DIN 58405-3:1972 精密加工用正齿轮传动装置图样上的数据计算示例DIN 58405-4:1972 精密加工用正齿轮传动装置图表DIN 58411:1987 精密加工装置正齿轮用滚刀模数0.1至1mmDIN 58412:1987 精密机械齿轮刀具的基准齿形根据德国工业标准ＤＩＮ５８４００和ＤＩＮ８６７的渐开线啮合DIN 58420:1981 检验精密机械上圆柱齿轮用的标准齿轮齿轮毛坯及啮合DIN 58425-1:1980 精密机械的齿轮摆线啮合概要符号名称DIN 58425-4:1980 精密机械的齿轮摆线啮合齿轮和传动的公差和允许偏差DIN 58425-2:1980 精密机械的齿轮摆线啮合齿形DIN 58425-3:1980 精密机械的齿轮摆线啮合轮和传动装置的计算与设计DIN 58425-4:1980 精密机械的齿轮摆线啮合齿轮和传动的公差和允许偏差DIN 58425-5:1980 精密机械的齿轮摆线啮合齿轮刀具的齿廓DIN 58425-6:1980 精密机械的齿轮摆线啮合图样说明DIN 58425-7:1980 精密机械的齿轮摆线啮合图表DIN 73011:1983 汽车.轿车变速齿轮箱的换档次序DIN 75532-1:1976 旋转运动的传递与齿轮连接的型式中间齿轮挠性驱动轴与装置DIN 8000:1962 渐开线正齿轮用滚铣刀的测定尺寸与误差基本概念DIN 8002:1955 金属切削刀具正齿轮用带横向键槽或纵向键槽的滚铣刀模数1～20 DIN ISO 8123:1997 道路车辆起动发动机径节小齿轮DIN ISO 2203:1976 技术制图齿轮的习惯画法DIN ISO 6545:1997 机床端齿轮(圆柱齿轮)滚齿机的检收条件精度检验1． DIN 1825:1977 圆柱齿轮用插齿刀.直齿轮用盘形齿轮铣刀2． DIN 1826:1977 圆柱齿轮用插齿刀.直齿轮用加大毂形齿轮刀具3． DIN 1828:1977 圆柱齿轮用插齿刀.直齿轮用带柄齿轮刀具4． DIN 1829-1:1977 圆柱齿轮用插齿刀.设计、尺寸定义、标志5． DIN 1829-2:1977 圆柱齿轮用插齿刀.公差6． DIN 5482:1973 带渐开线齿面的内花键和外花轴外形尺寸7． DIN 51509-2:1988 润滑剂.齿轮传动用润滑剂的选择.第2部分:半流体润滑剂8． DIN 68856-8:2004 家具用五金件术语和定义第8部分推拉门齿轮9． DIN 69001-31:1981 机床多轴头 A型传动小齿轮10. DIN 69001-43:1981 机床多轴头 A和B型小齿轮套11. DIN 69001-52:1981 机床多轴头 A型齿轮12. DIN 87349:1976 人工操作用带传输管道系统的遥控传动装置.伞齿轮传动装置13. DIN 87350:1976 用手操作的带传输管的遥控装置.可快速旋转的冠形齿轮装置14. DIN EN ISO 4263-4:2006 石油和相关产品.防腐蚀矿物油和液体老化性的测定.TOST 试验.第4部分:工业齿轮油的程序(ISO 4263-4:2006)15. DIN EN ISO 13691:2003 石油和天然气工业.高速专用齿轮机构16. DIN EN ISO 13929:2001 小型船舶.操舵装置.齿轮链接系统17. DIN ISO 8123:1997 道路车辆.起动发动机径节小齿轮18. DIN ISO 9457-1:1997 道路车辆.米制起动器电动机小齿轮.第1部分:普通小齿轮19. DIN ISO 9457-2:1997 道路车辆.米制起动器电动机小齿轮.第2部分:20度压力角小齿轮20. DIN ISO 14635-1:2006-05 齿轮 FZG试验规程第1部分有关齿轮咬接油的载重量的FZG试验方法A/8.3/90。

DIN标紧固件的中文对照

DIN标紧固件的中文对照序号xx标准中文译文4DIN 1圆锥销5DIN 7圆柱销6DIN 84开槽圆柱头螺钉7DIN 85开槽盘头螺钉8DIN 93xx止动垫圈9DIN 94开口销10DIN 95开槽半沉头xx11DIN 96开槽半圆头xx12DIN 97开槽沉头xx13DIN 125-1平垫14DIN 125-2平垫(带倒角)15DIN 126平垫16DIN 127-1重型弹垫17DIN 127标准弹垫18DIN 128-1波形弹垫19DIN 137-1弹簧止动垫圈20DIN 137-2鞍形弹垫21DIN 186T型方颈螺栓22DIN 188T型双接头螺栓23DIN 258螺纹圆锥销24DIN 261T型头螺栓25DIN 315AF蝶型螺母(xx制)26DIN 315DF蝶型螺母(德制)27DIN 316AF蝶型螺钉(xx制)28DIN 317DF蝶型螺钉(德制)29DIN 319圆球型盖型螺母30DIN 404开槽带孔球面圆柱头螺钉31DIN 417开槽长圆柱端紧定螺钉DIN405 32DIN 427开槽平端紧定螺钉(半牙)33DIN 431小六角特薄细牙螺母34DIN 432外舌止动垫圈35DIN 433小垫圈(用于圆柱头螺钉)36DIN 434方斜垫圈(U型)37DIN 435方斜垫圈(I型)38DIN 436方垫圈39DIN 438开槽凹端紧定螺钉40DIN 439六角薄螺母41DIN 439六角薄螺母B级无倒角42DIN 439细牙六角薄螺母43DIN 440xx专用垫圈44DIN 443xx帽45DIN 444活节螺栓B型46DIN 462内舌止动垫圈47DIN 463xx止动垫圈48DIN 464滚花高头螺钉49DIN 465开槽滚花高头螺钉50DIN 466滚花高螺母51DIN 467滚花薄螺母52DIN 470锁紧垫圈53DIN 471轴用弹性挡圈54DIN 472xx弹性挡圈55 DIN 478方头带垫螺栓56 DIN 479方头圆柱底端螺栓57 DIN 480方头带垫半圆底端螺栓58 DIN 481弹性圆柱销59 DIN 508 T型槽螺母60 DIN 525单头螺柱61 DIN 529地脚螺栓62 DIN 546带槽圆螺母63 DIN 547端面带xx圆螺母64 DIN 551开槽平端紧定螺钉65 DIN 553开槽锥端紧定螺钉66 DIN 555六角螺母67 DIN 557方螺母-C68 DIN 558六角头螺钉69 DIN 561六角头圆柱端紧定螺钉70 DIN 562薄型方螺母-B71 DIN 571六角头xx72 DIN 580吊环螺钉73 DIN 582吊环螺母74 DIN 601六角头螺栓75 DIN 603大半圆头方颈螺栓(马车螺栓) C级76 DIN 604沉头带插销马车螺栓77 DIN 605沉头长方颈马车螺栓78 DIN 607半圆头带插销马车螺栓79 DIN 608沉头短方颈马车螺栓80 DIN 609六角头精配螺栓（长螺纹）81 DIN 610六角头精配螺栓（短螺纹）82 DIN 653滚花平头螺钉83 DIN 660半圆头铆钉84 DIN 661沉头铆钉85 DIN 662半沉头铆钉86 DIN 674大扁头铆钉87 DIN 703重型侧面带xx圆螺母88 DIN 705侧面带xx圆螺母89 DIN 741卡头90 DIN 787 T型槽螺钉91 DIN 835双头螺柱（牙长=2D）92 DIN 906xx锥型闭锁螺钉93 DIN 908xx直型闭锁螺钉94 DIN 909外六角锥型闭锁螺钉95 DIN 910外六角直型闭锁螺钉96 DIN 911xx扳手97 DIN 912xx圆柱头螺钉98 DIN 913xx平端紧定螺钉99 DIN 914xx尖端紧定螺钉100 DIN 915内六角圆柱端紧定螺钉101 DIN 916内六角凹端紧定螺钉102 DIN 917薄型盲螺母103 DIN 920开槽小圆柱头螺钉104 DIN 921开槽大圆柱头螺钉105 DIN 923开槽圆柱头轴肩螺钉106 DIN 927开槽无头轴肩螺钉107 DIN 928焊接方螺母108 DIN 929焊接六角螺母109 DIN 931六角头螺栓（半牙）110 DIN 933六角头螺栓（全牙）111 DIN 934六角头螺母(1型)112 DIN 934-2细牙六角头螺母(1型) 113 DIN 935开槽六角螺母114 DIN 936六角头薄螺母115 DIN 937六角头开槽薄螺母116 DIN 938双头螺距（牙长=1D）117 DIN 939双头螺距（牙长=1.25D）118 DIN 939双头螺距（牙长=1.5D）119 DIN 940双头螺距（牙长=1.5D）120 DIN 960六角头细牙螺栓（半牙）121 DIN 961六角头细牙螺栓（全牙）122 DIN 962头部穿孔六角头螺栓123 DIN 963开槽沉头螺钉124 DIN 964开槽半沉头螺钉125 DIN 965十字槽沉头螺钉126 DIN 966十字槽半沉头螺钉127 DIN 970六角头螺母128 DIN 971六角头螺母129 DIN 972细牙六角头螺母(2型)130 DIN 975牙条(全螺纹)131 DIN 976螺纹销132 DIN 979六角头开槽薄螺母（2型）133 DIN 980全金属六角锁紧螺母（1型）134 DIN 981圆螺母135 DIN 982六角头尼龙锁紧螺母136 DIN 985六角头薄型尼龙锁紧螺母137 DIN 986六角盖型尼龙锁紧螺母138 DIN 988配合垫片139 DIN 1052木材连接用垫片140 DIN 1151沉头钢钉141 DIN 1440销钉专用垫片A型142 DIN 1441销钉专用垫片143 DIN 1444带头销钉144 DIN 1471圆锥型槽销145 DIN 1472圆锥型槽销(半槽)146 DIN 1473平行槽销(带倒角)147 DIN 1474前端凹槽槽销148 DIN 1475中部凹槽槽销149 DIN 1476圆头槽销150 DIN 1477沉头槽销151 DIN 1479六角螺母棒152 DIN 1480花篮螺栓153 DIN 1481弹性圆柱销开槽重型154 DIN 1587组合式盖型螺母155 DIN 1804开槽圆螺母（配合沟头扳手）156 DIN 1816圆螺母（带插销孔）157 DIN 2093盘型弹簧垫圈158 DIN 3017喉箍159 DIN 3404润滑油嘴（旋扭头）160 DIN 3567管夹161 DIN 3570 U型螺栓162 DIN 5587 2型六角螺母A和B级163 DIN 6319球面垫圈164 DIN 6325圆柱销165 DIN 6330厚六角螺母166 DIN 6331厚六角法兰面螺母167 DIN 6334xx六角螺母168 DIN 6797-A外齿锁紧垫圈169 DIN 6797-I内齿锁紧垫圈170 DIN 6798-A外锯齿锁紧垫圈171 DIN 6798-I内锯齿锁紧垫圈172 DIN 6799开口挡圈173 DIN 6823六角xx面螺母174 DIN 6885平键（A型）175 DIN 6888半圆键176 DIN 6899嵌环（支撑环）177 DIN 6900机器螺钉和垫圈组合件178 DIN 6901自攻螺钉和垫圈组合件179 DIN 6912薄型带孔内六角圆柱头螺钉180 DIN 6914大六角头螺栓181 DIN 6915大六角螺母182 DIN 6916大垫圈183 DIN 6917楔型方垫圈184 DIN 6921六角法兰面螺栓加大系列B级185 DIN 6923六角xx面螺母186 DIN 6925全金属六角锁紧螺母(2型）187 DIN 7337开口型抽芯铆钉（沉头、扁圆头）188 DIN 7338扁平头半空心/全空心铆钉189 DIN 7343螺旋夹紧销190 DIN 7346轻型弹性圆柱销191 DIN 7349重型弹性圆柱销用垫圈192 DIN 7500 ISO公制螺纹螺钉(多种头型) 193 DIN 7504自攻自钻螺钉(多种头型)194 DIN 7513开槽切削螺纹螺钉(多种头型) 195 DIN 7516十字槽切削螺纹螺钉(多种头型) 196 DIN 7965 T型四爪螺母197 DIN 7968钢结构用六角头螺栓连接副198 DIN 7971开槽盘头自攻螺钉199 DIN 7972开槽沉头自攻螺钉200 DIN 7973开槽半沉头自攻螺钉201 DIN 7976六角头自攻螺钉202 DIN 7978圆锥销203 DIN 7980圆柱头螺钉用弹簧垫圈204 DIN 7981十字槽盘头自攻螺钉205 DIN 7982十字槽沉头自攻螺钉206 DIN 7983十字槽半沉头自攻螺钉207 DIN 7984薄型内六角圆柱头螺钉208 DIN 7985十字槽盘头螺钉209 DIN 7989钢结构用垫圈210 DIN 7990钢结构用六角头螺栓211 DIN 7991xx沉头螺钉212 DIN 7993轴用钢丝挡圈213 DIN 7995十字槽半沉头木螺钉214 DIN 7996十字槽圆头木螺钉215 DIN 7997十字槽沉头木螺钉216 DIN 8140螺纹护套（普通\自锁等）217 DIN 9021大外径垫圈218 DIN 11024弹簧xx219 DIN 13257平板螺栓220 DIN 18182干壁钉（墙板钉）221 DIN 28129环型螺母222 DIN 70952圆螺母用止退垫圈螺丝，紧固件，标准件词汇的中英文对照机(踏)车用螺丝、轴心Screws And Shafts For Motorcycle Or Bicycle 针车用螺丝、轴心Screws And Shafts For Sewing Maching止付螺丝Socket Set Screws不锈钢宽牙螺丝Stainless Steel Coarse Thread Screws不锈钢高低牙螺丝Stainless Steel High-Low Thread Screws不锈钢机械螺丝Stainless Steel Machine Screws不锈钢钻尾螺丝Stainless Steel Self Drilling Screws不锈钢自攻螺丝Stainless Steel Self Tapping Screws不锈钢自削螺丝Stainless Steel Thread Cutting Screws不锈钢三角牙螺丝Stainless Steel Tri-Lobular Thread Screws插片壁虎Steel Ceiling Anchors内迫壁虎Drop in Anchors碳钢锤钉壁虎Steel Hit Anchors碳钢六角螺帽Steel Hex Coupling Nuts强力xx壁虎Wedge Anchors外迫壁虎Cut Anchors化学壁虎Chemical Anchors不锈钢重载胀栓Heavy Duty Expansion Anchors鱼眼壁虎企眼长螺帽Tie Wire Anchors锌合金打入式壁虎Hammer Drive Anchors弹簧螺帽Strut Nuts兰花夹系列Toggle Bolts (Spring Toggle & Gravity Toggle)门窗、地板专用壁虎Nylon Frame Anchors or Metalframe Anchors石膏板中空壁虎Hollow Wall Anchors套管式壁虎Sleeve Anchors打入式壁虎鱼形尼龙壁虎Nylon Frame Harmmer Fixing (Nylon Hammer Drive Anchors)强力式锤钉壁虎Hit Anchors电梯壁虎Bolt Anchors重载壁虎Heavy duty anchors两片夹Loxin Masonry Anchors定位螺栓Set Bolts长型兰花夹Short Strap Anchors工具棒Drop in Setting Tools象脚壁虎Elephant foot anchors水泥预埋件Concrete Insert翻边胀轴Drop in Anchor with Lip冲件Legs Drywall Anchors六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts) 圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts 壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut六角螺丝(栓) Hex Head Cap Screws(Hex Bolts)六角机械螺丝Hex Head Machine Bolts六角xx螺丝Hex Lag Bolts四角螺丝Square Head BoltsT头螺丝T Head Bolts马车螺丝Carriage Bolts环首螺丝Eye Bolts内六角孔螺丝Hex Socket Cap Screws固定螺丝Set Screws螺椿栓Stud Bolts螺旋椿Screw Studs轮壳螺栓Wheel Bolts翼形螺丝Wing Screws自攻螺丝Self Tapping Screws自削螺丝Thread Cutting Screws钻尾螺丝Self Drilling Screws旋入螺丝Drive Screws机械螺丝Machine Screws木螺丝Wood Screws家具螺丝Furniture Screws塑板螺丝Chipboard Screws墙用螺丝Drywall Screws基础螺栓Foundation BoltsU型螺栓U Bolts勾头螺栓Hook Bolts套挂螺丝Toggle Bolts突缘螺丝Flange Bolts轨道螺栓(鱼尾螺丝) Track Bolts耐候钢螺丝Corten Steel Heavy Hex Bolts扭矩控制螺栓T.C.Bolts高张力螺栓High Strength Bolts剪力钉(焊接螺丝) Welding Studs螺丝附华司组合Screws And Washers Assembled(Sems)大尺寸螺栓Big Size Bolts不锈钢小螺丝Stainless Steel Sheet Metal Screws不锈钢大螺丝Stainless Steel Bolts铜螺丝Brass Screws铝螺丝Aluminum Screws合金钢螺丝Alloy Steel Screws电子螺丝Electronic Screws微小精密螺丝Micro Screws塑料螺丝Plastic Screws复合材料用螺丝Particle Board Screws钛合金螺丝Titanium Alloy Bolts钛、锆、钼、铌等螺丝、零件、材料Ti,Zr,Mo,Nb Pare Metal Bolts Parts 拇指螺丝Thumb Screws双头牙螺丝Double End Screws Hanger Bolt车辆(汽车)螺丝、螺帽Automotive Fasteners航天用螺丝Aerospace Fasteners飞机特殊扣件Source Control BoltsxxBlind Bolts面板螺丝Panel Fasteners电梯螺丝Elevator Bolts四角头固定螺丝Square Set Screws大头马车螺丝Step Bolts单向螺丝One Way Lag Screws管夹螺丝Hose Clamp Screws不锈钢固定螺丝Stainless Steel Hex Socket Cap Screws 不锈钢内六角螺丝Stainless Steel Hex Socket Cap Screws 铰链螺丝Hinge Screws货柜螺丝Container Screws复合材料钻尾螺丝Bi-Metal Self Drilling Screws三角牙螺丝Trilobular Thread Screws高低牙螺丝High Low Screws夹板用螺丝Particle Board Screws马桶螺丝Toilet Closet Bolts特长螺丝Special Longer Screws建业螺丝Building Fasteners不锈钢六角螺丝Stainless Steel Hex Socket Cap Screws 其它特殊螺丝Special Screws Or Bolts不锈钢特殊螺丝Special Stainless Steel Screws宽牙螺丝（粗牙螺丝）Coarse Thread Screws链带螺丝Collated Screws水泥螺丝Concrete Screws板模螺丝Construction Bolts锌蝶螺丝Die Cast Wing Screws; Zinc Alloy重型车螺丝Heavy Duty Wheel Hub Bolts内六角固定螺丝Hex Socket Set Screws复合材料用螺丝（夹板用）Particle Board Screws 犁壁螺丝Plow Bolts不锈钢木螺丝Stainless Steel Wood Screws套挂螺栓及螺丝Toggle Bolts钛合金膨胀螺丝Titanium Alloy Expansion Bolts 六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts 壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts锌压属螺帽Zinc Die Casting Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut合金钢线材盘元Alloy Steel Wire Rod球状化线材Annealing Wire And Rod黑铁丝Black Wire黄铜棒线Brass Wire And Rod磨光棒钢Bright Steel Bar(Hex/Round/Square)铜合金线Copper Alloy Wire线切割线E.D.M Cutting Wire快削钢线材盘元Free Cutting Steel Wire Rod线材Iron Or Steel Wire线材盘元Iron Or Steel Wire Rod洋白铜线Nickel Silver Wire磷青铜线Phosphate Bronze Wire不锈钢条棒Stainless Steel Bar(Round/Hex/Square)不锈钢冷锻线材Stainless Steel Cold Heading Wire不锈钢线(抽线后) Stainless Steel Draw Wire不锈钢线材Stainless Steel Wire不锈钢线材及盘元Stainless Steel Wire And Rod棒钢Steel Bar(Hex/Round/Square)转回90度碾线头机90讧evolving Wire Twisting Machine气动拉钉机Air Riveter各式螺丝类产品自动包装Automatic Packaging For All Kinds Of Packaging 自动包装机Automatic Packing Machine螺丝制造搓牙机械Automatic Thread Rolling Machine螺丝割尾加工机械Automatic Thread Slotting Machine螺丝制造成型机械Automatic Trimming Machine拉钉打头机Blind Rivet Heading Machine螺丝、螺帽成型机Bolt Formers,Nuts Formers,Headers螺丝、螺帽热处理Bolt Nut And Screws Heat Treatment螺丝、螺帽热处理炉Bolt Nut And Screws Heat Treatment Furnaces球状化电器炖炉Carburizing Furnace Vacuum And Bell Type Furnace超防锈复合瓷膜Ceramic Coating连续式光辉渗碳淬火炉Continuous Bright Carburizing Quenching Furnace 连续式光辉调质淬火炉Continuous Bright Hardening Quenching Furnace 中、高热镀锌光辉连续炉Continuous Bright Heat Treat Furnace连续式光辉热处理炉Continuous Type Bright Heat Treatment Furnace螺丝割尾及特殊割遘加工Machine Screw Shank Slotting螺丝钻孔加工Screw Shank Drilling鸡眼上下模Eyelets Dies一般线材、盘元、退火炉General Wire,Wire Rod,Annealing Furnace倒立式滑落型伸线机Handstand Type Wire Drawing Machine十字冲模Header Punches In Various Drives成型冲模Header Punches In Various Drives螺丝打头机Heading Machine螺丝制造高速搓牙机械High Speed Automatic Thread Rolling Machine高中低周波感应加热炉High,Medium,Low Frequency Induction Heater 空心打头机Hollow Heading Machine热浸镀锌螺丝、螺帽Hot Dip Galvanizing Bolts And Nuts机械镀锌Mechanical Galvanized迷你成型机Mini-Formers成品自动收线机Non-Stop Coiler精抽自动收线机Non-Stop Coiler(Skinpass)螺帽模Nut Forming Dies螺帽成型模Nuts Formers特殊零件成型机Parts Forming Maching冲模Punch Dies冲子Punch Pins罗拉成型机Rollers Formers机(踏)车用螺丝成型机Screw For Motorcycle Or Bicycle Heading Machine 止付螺丝成型机Set Screws Formers套高成型机Sockets Formers一般线材、盘元、螺丝合金炖炉Spheroidizing Bright Annealing Furnace 球状化热处理炉Spheroidizing Heat Treatment Furnace攻牙机Tapping Machine螺丝攻、车刀、模具Taps Dies And Tools搓牙机铁屑分离装置Thread Chip Separator滚牙轮Thread Rolling Dies牙板Thread Rolling Dies Plates精密油压滚牙机Hydraulic Thread Rolling Machines模具Tools六角整头模Trimming Dies Hexagan碳化钨模具Tungsten Carbide Die镀钛处理(Tin)专业加工服务Tin Hard Coating For Cutting Tools And Punch By Pvd电镀化学原料Various Electroplating Chemicals环规校正Calibration For Ring Gage环规、牙规、三线规校正Calibration For Ring Gage, Athread Gage, 3 Wire Gage螺丝、螺帽品检量测仪器Fasteners Inspection And Measurement Instruments螺丝、螺帽成型攻牙专用油Forming And Tapping Oils For Bolts And Nuts Formers螺丝、螺帽五金等检验Insptection Services For Fasteners And Hardware德国schatz扭力机代理Representative Of Schatz Torque MachinIso品质保证系统Iso Quality Assurance System生产管理系统Production Control System物料管理系统Material Control System齿轮Gears不锈钢牙条棒Stainless Steel Hread Rod马达轴承轴心组件Bearing Shaft(Motor)轴承轴心Bearing Shaft开口铆钉Blind Rivets长形拉帽Blind Rivet Nuts拉帽Blind NutsxxBlind Rivets实心梢Clevis Pins And Straight Pins弹片Clips卷钉Coil Nails冷锻零件Cold Forming Part开口销Cotter PinsE型环E-Rings膨胀螺栓Expansion Anchor Bolts鸡眼钉Eyelets RivetsR型销Snap Pins闸、锁Latches And Keeper Assembleds其它特殊铆钉Other Specil Rivets销Pins格式管夹、管束Pipe Hanger铆钉Rivets螺旋锔及螺旋圈Screw Hook And Screw Rings 中空钉Semi-Tubular Rivet开叉钉Split Drive Anchors弹簧华司Spring Washers弹簧蝴蝶夹Spring Wings不锈钢华司Stainlesssteel Washers钢铁钉Steel And Iron Nails搓牙铁钉Thread Nails钛合金铆钉Titaium Alloy Rivets管形铆钉Tubular Rivets华司Washers真空热处理Vacuum Heat Treatment螺丝、螺帽、五金、Diy扣件Fasteners合金钢工具Alloy Steel Tools螺栓模Bolt Heading Dies手动xx钳Hand Riveter船舶链Anchor Chain脚踏车链锁Bicycle Chain Locks螺丝起子Bit罗拉Chain Roller特殊铆合扣件Collars(A Blindfastener For Huck Intl) 装饰链Decorative Chains自攻螺纹衬套Ensat Threaded Inserts六角扳手Hexagon Keys超音螺纹压入式螺纹自动锁扣Threaded Inserts For Plastic Injection Mouldeings汽车特殊杆接件Special Auto-Mobile Fastener As Your Needs螺纹护套Recoil Inserts链条用滚子Roller For Roller Chain金属板镶嵌组件及自动夹扣组件Sheet Metal Fasteners工具套筒组件Socket Wrench Sets不锈钢链Stainless Steel Chains轭子T-Yoke轮胎链Tire Chains狗链Dog Chains喇叭头轭铁U-Yoke,T-Yoke For Speaker不锈钢输送带轮用轨道Stainless Wheel's Rack For Transporter工业用链Industrial Steel Link Chains拖链安全链Tow Chains And Safety Chains机车离合器零件Manufacture Of Motorcycle's Cvt Parts牙条棒Thread Rod。

DIN_ISO_GB标准对照表-

德国标准和国际标准、中国标准中英文对照表序号德国标准中文品名英文品名国际标准中国标准Description inItem D IN-StandardDescription in English ISO-Standard GB-Standard Chinese1 DIN1 圆锥销taper pins ISO2339 GB1172 DIN7 圆柱销parallel pins ISO2338 GB119-863 DIN84 开槽圆柱头螺钉slotted cheese head screws ISO1207 GB65-854 DIN85 开槽盘头螺钉slotted pan head screws ISO1580 GB67-855 DIN93 单耳止动垫圈tab washers GB8546 DIN94 开口销split cotter pins ISO1234 GB91slotted raised csk head wood7 DIN95 开槽半沉头木螺钉GB101screws8 DIN96 开槽半圆头木螺钉slotted round head wood screws GB99slotted countersunk head wood9 DIN97 开槽沉头木螺钉GB100screws10 DIN125-A 平垫plain washers ISO7089 GB97.1-8511 DIN125-B 平垫(带倒角) mediun washers ISO7090 GB97.2-8512 DIN126 平垫plain washers ISO709113 DIN127-A 重型弹垫spring lock washers,tang ends GB724414 DIN127-B 标准弹垫spring lock washers,square ends GB93-8715 DIN128-A 鞍形弹垫single coil spring lock washers GB7245-8716 DIN137-A 弹簧止动垫圈curved spring washers17 DIN137-B 波形弹垫wave spring washers GB95518 DIN186 T型方颈螺栓T-head bolts with square neck GB 37-8819 DIN188 T型双接头螺栓T-head bolts with double nip20 DIN258 螺纹圆锥销taper pins with threaded end ISO873721 DIN261 T型头螺栓T-head bolts22 DIN315AF 蝶型螺母(美制) wing nuts amercia form23 DIN315DF 蝶型螺母(德制) wing nuts germany form GB62-8824 DIN316AF 蝶型螺钉(美制) wing screws amercia form25 DIN317DF 蝶型螺钉(德制) wing screws germany form26 DIN319 圆球型盖型螺母ball knobs27 DIN404开槽带孔球面圆柱头螺钉slotted capstan screws GB832-8828 DIN417开槽长圆柱端紧定螺钉slotted set srews with full dogpointISO7435 GB75-8529 DIN427开槽平端紧定螺钉(半牙) slotted set srews with chamferedendISO2342 GB73-8530 DIN431小六角特薄细牙螺母pipe nuts with thread GB808-8831 DIN432 外舌止动垫圈external tap GB856-8832 DIN433小垫圈(用于圆柱头螺钉)washers for cheese head screws ISO7092 GB848-95 33 DIN434 方斜垫圈(U型)square taper washers forU-sectionGB852-88 34 DIN435 方斜垫圈(I型)square taper washers forI-sectionsGB852-8835 DIN436 方垫圈square washers36 DIN438 开槽凹端紧定螺钉slotted set with cup point ISO7436 GB74-8537 DIN439 六角薄螺母hexagon thin nuts ISO4035 GB6172-8638 DIN439 细牙六角薄螺母hexagon thin nuts ISO8675 GB6173-8639 DIN440 木螺钉专用垫圈rounds washers for woodconstructionsISO709440 DIN443 密封帽sealing caps,push-in type41 DIN444 活节螺栓B 型eye bolts form B GB798-8842 DIN462 内舌止动垫圈internal tab washers43 DIN463 双耳止动垫圈washers with two taps GB855-8844 DIN464 滚花高头螺钉knurled thumb screws withcollarGB834-88 45 DIN465 开槽滚花高头螺钉slotted knurled thumb screwswith collar46 DIN466 滚花高螺母knurled thumb nuts with collar GB806-8847 DIN467 滚花薄螺母knurled thumb thin nuts GB807-8848 DIN470 锁紧垫圈sealing washers49 DIN471 轴用弹性挡圈retaining rings forshafts(external),circlipsGB894.1-86 50 DIN472 孔用弹性挡圈retaining rings forbores(internal),circlipsGB893.1-8651 DIN478 方头带垫螺栓square head bolts with collar52 DIN479 方头圆柱底端螺栓square head bolts with half dogpoint53 DIN480方头带垫半圆底端螺栓square head bolts with collar,half dog point and rounded end54 DIN508 T型槽螺母T-slot nuts ISO29955 DIN525 单头螺柱single end studs56 DIN529 地脚螺栓masonry bolts GB799-8857 DIN546 带槽圆螺母slotted round nuts GB817-7658 DIN547 端面带孔圆螺母round nuts with drilled holes inone faceGB815-8859 DIN551 开槽平端紧定螺钉slotted sit screws with flat point I SO4776 GB73-8560 DIN553 开槽锥端紧定螺钉slotted set screws with conepointISO7434 GB71-85 61 DIN555 六角螺母hexagon nuts ISO403462 DIN557 方螺母-C square nuts GB39-8863 DIN558 六角头螺钉hexagon screws ISO401864 DIN561六角头圆柱端紧定螺钉hexagon set screws with full dog point65 DIN562 薄型方螺母-Bsquare nuts withoutbevel(pressed nuts)66 DIN571 六角头木螺钉hexagon head wood screws(coach screws)GB102-8667 DIN580 吊环螺钉lifting eye bolts ISO3266 GB825-7668 DIN582 吊环螺母lifting eye nuts69 DIN601 六角头螺栓hexagon bolts ISO401670 DIN603大半圆头方颈螺栓(马车螺栓) mushroom head square neckbolts (carriage bolts)ISO8677 GB14-8871 DIN604沉头带插销马车螺栓flat countersunk nib bolts72 DIN605沉头长方颈马车螺栓flat countersunk long square neck bolts73 DIN607半圆头带插销马车螺栓cup head nib bolts74 DIN608沉头短方颈马车螺栓flat countersunk short square neck bolts75 DIN609六角头精配螺栓（长螺纹）hexagon fitted bolts,long thread76 DIN610六角头精配螺栓（短螺纹）hexagon fitted bolts,short thread77 DIN653 滚花平头螺钉knurled thumb screws thin type GB835-8878 DIN660 半圆头铆钉round head rivets ISO1051 GB867-8679 DIN661 沉头铆钉contersunk head rivets ISO1051 GB869-8680 DIN662 半沉头铆钉raised contersunk head rivets ISO105181 DIN674 大扁头铆钉mushroom head rivets ISO105182 DIN703重型侧面带孔圆螺母adjusting rings,heavy range (shafting collars)83 DIN705 侧面带孔圆螺母adjusting rings,light range(shafting collars)GB816-8884 DIN741 卡头wire rope clips85 DIN787 T型槽螺钉T-slot screws ISO29986 DIN835双头螺柱（牙长=2D）studs-metal (end=2d) GB900-8887 DIN906内六角锥型闭锁螺钉hexagon socket pipe plugs,conical thread88 DIN908内六角直型闭锁螺钉hexagon socket screw plugs,cyl. thread89 DIN909外六角锥型闭锁螺钉hexagon head pipe plugs,conical thread90 DIN910外六角直型闭锁螺钉hexagon head screw plugs,cyl.thread91 DIN911 内六角扳手socket wrenches ISO293692 DIN912 内六角圆柱头螺钉hexagon socket cap screws ISO4762 GB70-8593 DIN913内六角平端紧定螺钉hexagon socket set screws withflat pointISO4026 GB77-8594 DIN914内六角尖端紧定螺钉hexagon socket set screws withcone pointISO4027 GB78-8595 DIN915内六角圆柱端紧定螺钉hexagon socket set screws withdog pointISO4028 GB79-8596 DIN916内六角凹端紧定螺钉hexagon socket set screws withcup pointISO4029 GB80-8597 DIN917 薄型盲螺母hexagon cap nuts98 DIN920 开槽小圆柱头螺钉slotted short cheese head screws99 DIN921 开槽大圆柱头螺钉slotted large cheese head screws GB838-88100 DIN923开槽圆柱头轴肩螺钉slotted pan head screws withshoulderGB830-88101 DIN927 开槽无头轴肩螺钉slotted shoulder screws102 DIN928 焊接方螺母square weld nuts GB/T13680-92 103 DIN929 焊接六角螺母hexagon weld nuts GB/T13681-92 104 DIN931 六角头螺栓（半牙）hexagon head screws ISO4014 GB5782-86 105 DIN933 六角头螺栓（全牙）hexagon head screws ISO4017 GB5783-86 106 DIN934 六角头螺母(1型) hexagon full nuts ISO4032 GB6170-86 107 DIN934细牙六角头螺母(1型)hexagon full nuts ISO8673 GB6171-86 108 DIN935 开槽六角螺母hexagon slotted and castle nuts ISO7035 GB6178-86 109 DIN936 六角头薄螺母hexagon thin nuts ISO4035 GB6172.1-86 110 DIN937 六角头开槽薄螺母hexagon thin slotted and castlenutsISO7038 GB6181-86 111 DIN938双头螺距（牙长=1D）studs metal (end=1d) GB897-88 112 DIN939双头螺距（牙长=1.25D）studs metal (end=1.25d) GB898-88 113 DIN940双头螺距（牙长=1.5D）studs metal (end=1.5d)114 DIN960六角头细牙螺栓（半牙）hexagon head bolts,metric finepitch threadISO8765 GB5785-86115 DIN961六角头细牙螺栓（全牙）hexagon head bolts,metric finepitch threadISO8676 GB5786-86116 DIN962 头部穿孔六角头螺additional shapes and versions栓for bolts117 DIN963 开槽沉头螺钉slotted countersund head screws ISO 2009 GB68-85 118 DIN964 开槽半沉头螺钉slotted raised countersunk ovalhead screwsISO 2010 GB69-85 119 DIN965 十字槽沉头螺钉cross recessed countersunk headscrewsISO7046 GB819-85 120 DIN966 十字槽半沉头螺钉cross recessed raisedcountersunk head screwsISO7047 GB820-85 121 DIN970 六角头螺母hexagon nuts type-1122 DIN971 六角头螺母hexagon nuts type-2123 DIN972细牙六角头螺母(2型)hexagon nuts with fine thread ISO8674 GB6176-86 124 DIN975 牙条(全螺纹) threaded rods(studdings) GB15389-94 125 DIN976 螺纹销threaded pins(stud bolts)126 DIN979六角头开槽薄螺母（2型）hexagon thin slotted and castle nuts127 DIN980全金属六角锁紧螺母（1型）prevailling torque type hexagonnuts,all metall nutsISO7199 GB6184-86128 DIN981 圆螺母locknuts ISO2982 GB812-88129 DIN982六角头尼龙锁紧螺母prevailling torque type hexagonnuts,heavy type ,with nyloninsertISO7040 GB889.1-86130 DIN985六角头薄型尼龙锁紧螺母prevailling torque type hexagonnuts,heavy type ,with nyloninsertISO10511 GB6172.2-86131 DIN986六角盖型尼龙锁紧螺母prevailling torque typedomed capnuts with nylon insert132 DIN988 配合垫片shim rings133 DIN1052 木材连接用垫片washers for timber connectors134 DIN1151 沉头钢钉round plain head nails135 DIN1440 销钉专用垫片A型plain washers for clevis pins(A型)ISO8738136 DIN1441 销钉专用垫片plain washers for clevis pins137 DIN1444 带头销钉clevis pins with head ISO2341138 DIN1471 圆锥型槽销grooved pins,taper grooved ISO8744 GB/T13829.2 139 DIN1472 圆锥型槽销(半槽)grooved pins,taper grooved halflengthISO8745 GB/T13829.2 140 DIN1473 平行槽销(带倒角)grooved pins,parallel groovedfull lengthISO8740141 DIN1474 前端凹槽槽销grooved pins,reserve groovedhalf lengthISO8741142 DIN1475 中部凹槽槽销grooved pins,centre grooved ISO8742143 DIN1476 圆头槽销grooved pins with round head ISO8746 GB/T13829.3 144 DIN1477 沉头槽销grooved pins with countersunkheadISO8747145 DIN1479 六角螺母棒turnuckles(centre parts),madeout of hexagon bar146 DIN1480 花篮螺栓turnuckles with eye bolt andhook bolt147 DIN1481 弹性圆柱销spring pins,heavy type ISO8752 GB879-86 148 DIN1587 组合式盖型螺母hexagon domed cap nuts GB802-88149 DIN1804开槽圆螺母（配合沟头扳手）slotted round nuts for hook spanner150 DIN1816 圆螺母（带插销孔）round nuts with set holes 151 DIN2093 盘型弹簧垫圈disc springs152 DIN3017 喉箍hose clamps153 DIN3404 润滑油嘴（旋扭头）lubricating nipples,button head154 DIN3567 管夹shackles for conduilts155 DIN3570 U型螺栓stirrup bolts(U-bolts)156 DIN6319 球面垫圈spherical washers,conical seats GB849-88 157 DIN6325 圆柱销parallel pins ISO8734158 DIN6330 厚六角螺母hexagon nuts ,1.5d GB56-88 159 DIN6331 厚六角法兰面螺母hexagon nuts ,1.5d with collar GB6177-86 160 DIN6334 长六角螺母hexagon nuts ,3d161 DIN6797-A 外齿锁紧垫圈external teeth lock washers GB862.1-87 162 DIN6797-I 内齿锁紧垫圈internal teeth lock washers GB861.1-87 163 DIN6798-A 外锯齿锁紧垫圈external teeth serrated lockwashersGB862.2-87 164 DIN6798-I 内锯齿锁紧垫圈internal teeth serrated lockwashersGB861.2-87 165 DIN6799 开口挡圈retaining rings forshafts(E-rings),circlipsGB896-76 166 DIN6885 平键（A型）parallel keys(form A ) ISO773/2491167 DIN6888 半圆键woodruff keys ISO3912168 DIN6899 嵌环（支撑环）thimbles169 DIN6900机器螺钉和垫圈组合件screws and washers assemblies GB9074.1-.17170 DIN6901自攻螺钉和垫圈组合件tapping screws and washersassembliesGB9074.18-.23171 DIN6912薄型带孔内六角圆柱头螺钉hexagon socket head cap screws with hole,low head172 DIN6914 大六角头螺栓hexagon head bolts with largehead(friction grip bolts)173 DIN6915 大六角螺母hexagon nuts with large widethacross flat(friction grip nuts)174 DIN6916 大垫圈round washers for friction gripbolts175 DIN6917 楔型方垫圈spuare taper washers for frictiongrip bolts on T-sections176 DIN6923 六角法兰面螺母hexagon flange nuts ISO4161 GB6177-86177 DIN6925全金属六角锁紧螺母(2型）prevailing torque type hexagonnuts,all metallic nutsISO7042 GB6185.1-2000178 DIN7337开口型抽芯铆钉（沉头、扁圆头）blind rivets GB12617/12618 179 DIN7338扁平头半空心/全空心铆钉rivets for brake and clutch lining GB875/975-86 180 DIN7343 螺旋夹紧销spiral pins ISO8750181 DIN7346 轻型弹性圆柱销spring pins,light type ISO13337182 DIN7349重型弹性圆柱销用垫圈washers for bolts with heavy type spring pinss183 DIN7500ISO公制螺纹螺钉(多种头型) threadforming screws for ISO-metric thread184 DIN7504自攻自钻螺钉(多种头型)self-drilling tapping screws 185 DIN7513开槽切削螺纹螺钉(多种头型)thread cutting screws186 DIN7516十字槽切削螺纹螺钉(多种头型) thread cutting screws cross recess187 DIN7965 T型四爪螺母tee nuts with pronge188 DIN7968钢结构用六角头螺栓连接副hexagon head fitted bolts forsteel structuresGB1228/1229/1230189 DIN7971 开槽盘头自攻螺钉pan head tapping screws with ISO1481 GB5282-85190 DIN7972 开槽沉头自攻螺钉countersunk flat head tappingscrews with slotISO1482 GB5283-85191 DIN7973开槽半沉头自攻螺钉raised countersunk oval headtapping screws with slotISO1483 GB5284-85192 DIN7976 六角头自攻螺钉hexagon tapping screws ISO1479 GB5285-85193 DIN7980圆柱头螺钉用弹簧垫圈spring lock washers for screwswith cylindrical headsISO8738194 DIN7981十字槽盘头自攻螺钉pan head tapping screws withcross recessedISO 7049 GB845-85195 DIN7982十字槽沉头自攻螺钉countersunk flat head tappingscrews with cross recessedISO7050 GB846-85196 DIN7983十字槽半沉头自攻螺钉raised countersunk oval headtapping screws with crossrecessedISO7051 GB847-86197 DIN7984薄型内六角圆柱头螺钉hexagon socket head cap screws with，reduced head198 DIN7985 十字槽盘头螺钉pan head screws with crossrecessedISO7045 GB818-85 199 DIN7989 钢结构用垫圈washers for steel structures GB1230-84200 DIN7990钢结构用六角头螺栓hexagon head bolts for steelstructuresGB1229-84201 DIN7991 内六角沉头螺钉hexagon socket countersunkhead screwsISO10642202 DIN7993 轴用钢丝挡圈roundwire snap rings for shafts GB895.2-86203 DIN7995十字槽半沉头木螺钉cross recessed raisedcountersunk head wood screwsGB952-86204 DIN7996 十字槽圆头木螺钉cross recessed round head wood GB950-86205 DIN7997 十字槽沉头木螺钉cross recessed countersunk headwood screwsGB951-86206 DIN8140螺纹护套（普通\自锁等）ciol inserts,coarse,fine thread,silf locking207 DIN9021 大外径垫圈washers,outside diameterappro.3dISO7093 GB96-85 208 DIN11024 弹簧卡子spring cotter for a bolt209 DIN13257 平板螺栓belting bolts (elevator bolts)210 DIN18182 干壁钉（墙板钉）dry wall screws211 DIN28129 环型螺母lifting nuts(eye nuts) GB63-88 212 DIN70952 圆螺母用止退垫圈tab washers for slotted roundnutsGB858-88。

文具标准汇编

文具国外标准目录精品宁波市标准化研究院2008年5月12日文具国外标准目录1.书写工具 (1)1.1 钢笔、水笔 (1)1.2 圆珠笔、中性笔 (1)1.3 铅笔 (2)1.4 粉笔 (3)1.5 记号笔（特种笔） (3)2. 纸品本册 (3)2.1 笔记本、练习本 (3)2.2 信封 (4)2.3 簿册、帐本票据 (5)3. 五金桌面文具 (5)3.1 订书机 (5)3.2 订书针、回形针、大头针、图钉（三针一钉） (6)3.3 计算器 (6)3.4 切纸机、剪刀 (7)3.5 打孔机 (7)4. 文件保管用品 (8)4.1 文件夹 (8)5. 化工类文具 (8)5.1 胶水、固体胶 (8)5.2 修正液 (9)6. 教具 (9)6.1 黑板 (9)6.2 学生桌椅 (9)6.3 其它 (10)7. 美术用品 (10)7.1 蜡笔 (10)8. 学生用品 (10)8.1 书包 (10)精品8.2 文具盒、橡皮擦、卷笔刀 (11)8.3 绘图仪尺 (12)8.4 圆规 (13)9. 办公家具 (14)9.1 文件柜、办公用贮存柜 (14)9.2 保险柜 (14)10. 办公耗材 (15)10.1 办公用纸 (15)10.2 墨盒类 (16)11. 办公设备 (16)11.1 打印机 (16)11.2 复印机 (17)11.3 传真机 (18)文具国外标准目录一览表1.书写工具1.1 钢笔、水笔1.2 圆珠笔、中性笔1.3 铅笔1.4 粉笔1.5 记号笔（特种笔）2. 纸品本册2.1 笔记本、练习本2.2 信封2.3 簿册、帐本票据3. 五金桌面文具3.1 订书机3.2 订书针、回形针、大头针、图钉（三针一钉）3.3 计算器3.4 切纸机、剪刀3.5 打孔机4. 文件保管用品4.1 文件夹5. 化工类文具5.1 胶水、固体胶5.2 修正液6. 教具6.1 黑板6.2 学生桌椅6.3 其它7. 美术用品7.1 蜡笔8. 学生用品8.1 书包8.2 文具盒、橡皮擦、卷笔刀8.3 绘图仪尺8.4 圆规9. 办公家具9.1 文件柜、办公用贮存柜9.2 保险柜10. 办公耗材办公用纸10.110.2 墨盒类11. 办公设备11.1 打印机11.2 复印机11.3 传真机32742-3-1995（德国）ISO/IEC15404-2000信息技术—办公室设备—分类表格中包含最小的信息—传真机设备18备注：标准号后没有注明国别的标准为国际标准，如ISO或IEC标准。

中英文耐火材料国家标准列表

中英文耐火材料国家标准1 GB/T 2275-1987 镁砖及镁硅砖Magnesia and magnesia-silica refractory bricks2 GB/T 2608-1987 硅砖Silica refractory bricks3 GB/T 2988-1987 高铝砖High-alumina refractory bricks4 GB/T 2997-1982 致密定形耐火制品显气孔率、吸水率、体积密度和真气孔率试验方法Test method for the apparent porosity, water absorption bulk density and true porosity of dense shaped refractory products5 GB/T 2998-1982 定形隔热耐火制品体积密度和真气孔率试验方法Test method for bulk density and true porosity of shaped insulating refractory products6 GB/T 2999-1982 粒状耐火材料体积密度试验方法Test method for the bulk density of granular refractory materials7 GB/T 3000-1982 耐火制品透气度试验方法Test method for permeability of refractory products8 GB/T 3001-1982 耐火制品常温抗折强度试验方法Test method for modulus of rupture of refractory products at room temperatures9 GB/T 3002-1982 耐火制品高温抗折强度试验方法Test method for modulus of rupture of refractory products at elevated temperatures10 GB/T 3003-1982 普通硅酸铝耐火纤维毡Ordinary alumino-silicate refractory fiber felts11 GB/T 3004-1982 普通硅酸铝耐火纤维毡容重试验方法Test method for bulk density of ordinary alumino-silicate refractory fiber felts12 GB/T 3005-1982 普通硅酸铝耐火纤维毡加热线收缩试验方法Test method for heating linear shrinkage of ordinary alumino-silicate refractory fiber felts13 GB/T 3006-1982 普通硅酸铝耐火纤维毡渣球含量试验方法Test method for the content of slag ball of ordinary alumino-silicate refractory fiber felts14 GB/T 3007-1982 普通硅酸铝耐火纤维毡含水量试验方法Test method for moisture content of ordinary alumino-silicate refractory fiber felts15 GB/T 3008-1982 普通硅酸铝耐火纤维毡检验制样规定Rule for preparing samples of ordinary alumino-silicate refractory fiber felts16 GB/T 3994-1983 粘土质隔热耐火砖Shaped insulating refractory products--Fireclay bricks17 GB/T 3995-1983 高铝质隔热耐火砖Shaped insulating refractory products--High alumina bricks18 GB/T 3996-1983 硅藻土隔热制品Shaped thermal insulating products--Diatomite bricks and shapes19 GB/T 4513-1984 不定型耐火材料(致密和隔热) 分类Prepared unshaped refractory materials (dense and insulating)--Classification20 GB/T 4984-1985 锆刚玉耐火材料化学分析方法Chemical analysis methods of zirconia-alumina refractories21 GB/T 5069.1-1985 镁质耐火材料化学分析方法重量法测定灼烧失量Magnesite refractories--Determination of loss content on ignition--Gravimetric method22 GB/T 5069.2-1985 镁质耐火材料化学分析方法钼蓝光度法测定二氧化硅量Magnesite refractories--Determination of silicon dioxide content--Molybdenum blue photometric method23 GB/T 5069.3-1985 镁质耐火材料化学分析方法重量-钼蓝光度法测定二氧化硅量Magnesite refractories--Determination of silicon dioxide content--Gravimetric -molybdenum blue photometric method24 GB/T 5069.4-1985 镁质耐火材料化学分析方法邻二氮杂菲光度法测定三氧化二铁量Magnesite refractories--Determination of iron oxide content--O-Phenanthroline photometric method25 GB/T 5069.5-1985 镁质耐火材料化学分析方法铬天青S 光度法测定氧化铝量Magnesite refractories--Determination of aluminium oxide content--Chromazurol S photometric method26 GB/T 5069.6-1985 镁质耐火材料化学分析方法EDTA容量法测定氧化铝量Magnesite refractories--Determination of aluminium oxide--EDTA volumetric method 27 GB/T 5069.7-1985 镁质耐火材料化学分析方法二安替比林甲烷光度法测定二氧化钛量Magnesite refractories--Determination of titanium dioxide content--Diantipyrylmethane photometric method28 GB/T 5069.8-1985 镁质耐火材料化学分析方法EDTA容量法测定氧化钙量Magnesite refractories--Determination of calcium oxide content--EGTA volumetric method29 GB/T 5069.9-1985 镁质耐火材料化学分析方法CyDTA容量法测定氧化镁量Magnesite refractories--Determination of magnesium oxide content--CyDTA volumetric method30 GB/T 5069.10-1985 镁质耐火材料化学分析方法原子吸收分光光度法测定氧化锰量Magnesite refractories--Determination of manganese oxide content--Atomic absorption spectrophotometric method31 GB/T 5069.11-1985 镁质耐火材料化学分析方法原子吸收分光光度法测定氧化钾、氧化钠量Magnesite refractories--Determination of potassium oxide andsodium oxide contents--atomic absorption spectrophotometric method32 GB/T 5070.1-1985 镁铬质耐火材料化学分析方法重量法测定灼烧失量Magnesite-chrome refractories--Determination of loss content on ignition--Gravimetric method33 GB/T 5070.2-1985 镁铬质耐火材料化学分析方法钼蓝光度法测定二氧化硅量Magnesite-chrome refractories--Determination of silicon dioxide content--Molybdenum blue phetometric method34 GB/T 5070.3-1985 镁铬质耐火材料化学分析方法邻二氮杂菲光度法测定三氧化二铁量Magnesite-chrome refractories--Determination of iron oxide content--O-Phenanthroline photometric method35 GB/T 5070.4-1985 镁铬质耐火材料化学分析方法EDTA容量法测定氧化铝量Magnesite-chrome refractories--Determination of aluminium oxide--EDTA volumetric method36 GB/T 5070.5-1985 镁铬质耐火材料化学分析方法二安替比林甲烷光度法测定二氧化钛量Magnesite-chrome refractories--Determination of titanium dioxide content--Diantipyrylmethane photometric method37 GB/T 5070.6-1985 镁铬质耐火材料化学分析方法EGTA容量法测定氧化钙量Magnesite-chrome refractories--Determination of calcium oxide content--EGTA volumetric method38 GB/T 5070.7-1985 镁铬质耐火材料化学分析方法CyDTA容量法测定氧化镁量Magnesite-chrome refractories--Determination of magnesium oxide content--CyDTA volumetric method39 GB/T 5070.8-1985 镁铬质耐火材料化学分析方法硫酸亚铁铵容量法测定三氧化二铬量Magnesite-chrome refractories--Determination of chromium oxide content--Ammonium ferrous sulfate volumetric method40 GB/T 5070.9-1985 镁铬质耐火材料化学分析方法原子吸收分光光度法测定氧化锰量Magnesite-chrome refractories--Determination of manganese oxide content--Atomic absorption spectrophotometric method41 GB/T 5070.10-1985 镁铬质耐火材料化学分析方法原子吸收分光光度法测定氧化钾、氧化钠量Magnesite-chrome refractories--Determination of potassium oxide and sodium oxide contents--Atomic absorption spectrophotometric method42 GB/T 5073-1985 耐火制品压蠕变试验方法Test method for creep in compression of refractory products43 GB/T 5988-1986 致密定形耐火制品重烧线变化试验方法Dense shaped refractory products--Test method of linear changes on reheating44 GB/T 5990-1986 定形隔热耐火制品导热系数试验方法(热线法) Shaped insulating refractory products--Test method of the thermal conductivity (hot wire method)45 GB/T 6900.1-1986 粘土、高铝质耐火材料化学分析方法重量法测定灼烧减量Fireclay and high-alumina refractories--Determination of loss content on ignition--Gravimetric method46 GB/T 6900.2-1986 粘土、高铝质耐火材料化学分析方法重量-钼蓝光度法测定二氧化硅量Fireclay and high-alumina refractories--Determination of silicon dioxide content--Gravimetric-molybdenum blue photometric method47 GB/T 6900.3-1986 粘土、高铝质耐火材料化学分析方法邻二氮杂菲光度法测定三氧化二铁量Fireclay and high-alumina refractories--Determination of iron oxide content--o-Phenanthroline photometric method48 GB/T 6900.4-1986 粘土、高铝质耐火材料化学分析方法EDTA容量法测定氧化铝量Fireclay and high-alumina refractories--Determination of aluminium oxide content--EDTA volumetric method49 GB/T 6900.5-1986 粘土、高铝质耐火材料化学分析方法过氧化氢光度法测定二氧化钛量Fireclay and high-alumina refractories--Determination of titanium dioxide content--Hydrogen peroxide photometric method50 GB/T 6900.6-1986 粘土、高铝质耐火材料化学分析方法EDTA容量法测定氧化钙量Fireclay and high-alumina refractories--Determination of calcium oxide content--EDTA volumetric method51 GB/T 6900.7-1986 粘土、高铝质耐火材料化学分析方法二甲苯胺蓝I-溴化十六烷基三甲铵光度法测定氧化镁量Fireclay and high-alumina refractories--Determination of magnesium oxide content--Xylidyl blue I-CTAB photo-metric method52 GB/T 6900.8-1986 粘土、高铝质耐火材料化学分析方法原子吸收分光光度法测定氧化钙、氧化镁量Fireclay and high-alumina refractories--Determination of calcium oxide and magnesium oxide content--Atomic absorpion spectrophotometric method53 GB/T 6900.9-1986 粘土、高铝质耐火材料化学分析方法原子吸收分光光度法测定氧化钾、氧化钠量Fireclay and high-alumina refractories--Determination of potassium oxide and sodium oxide content--Atomic absorption spectrophotometric method54 GB/T 6900.10-1986 粘土、高铝质耐火材料化学分析方法过硫酸铵光度法测定氧化锰量Fireclay and high-alumina refractories--Determination of manganeseoxide content--Ammonium persulfate photometric method55 GB/T 6900.11-1986 粘土、高铝质耐火材料化学分析方法钼蓝光度法测定五氧化二磷量Fireclay and high-alumina refractories--Determination of phosphorus pentoxide content--Molybdenum blue photometric method56 GB/T 6901.1-1986 硅质耐火材料化学分析方法重量法测定灼烧减量Silica refractories--Determination of loss content on ignition--Gravimetric method57 GB/T 6901.2-1986 硅质耐火材料化学分析方法重量-钼蓝光度法测定二氧化硅量Silica refractories--Determination of silicon dioxide content--Gravimetric-molybdenum blue photometric method58 GB/T 6901.3-1986 硅质耐火材料化学分析方法氢氟酸重量法测定二氧化硅量Silica refractories--Determination of silicon dioxide content--Hydrofluoric acid gravimetric method59 GB/T 6901.4-1986 硅质耐火材料化学分析方法邻二氮杂菲光度法测定三氧化二铁量Silica refractories--Determination of iron oxide content--o-Phenanthroline photometric method60 GB/T 6901.5-1986 硅质耐火材料化学分析方法铬天青S 光度法测定氧化铝量Silica refractories--Determination of aluminium oxide content--Chromazurol S photometric method61 GB/T 6901.6-1986 硅质耐火材料化学分析方法EDTA容量法测定氧化铝量Silica refractories--Determination of aluminium oxide content--EDTA volumetric method62 GB/T 6901.7-1986 硅质耐火材料化学分析方法二安替比林甲烷光度法测定二氧化钛量Silica refractories--Determination of titanium dioxide content--Diantipyrglmethane photometric method63 GB/T 6901.8-1986 硅质耐火材料化学分析方法原子吸收分光光度法测定氧化钙、氧化镁量Silica refractories--Determination of calcium oxide content and magnesium oxide--Atomic absorption spectrophotometric method64 GB/T 6901.9-1986 硅质耐火材料化学分析方法原子吸收分光光度法测定氧化钾、氧化钠量Silica refractories--Determination of potassium oxide and sodium oxide content--Atomic absorption spetrophotometric method65 GB/T 6901.10-1986 硅质耐火材料化学分析方法原子吸收分光光度法测定氧化锰量silica refractories--Determination of manganese oxide content--Atomic absorption spectrophotometric method66 GB/T 6901.11-1986 硅质耐火材料化学分析方法钼蓝光度法测定五氧化二磷量Silica refractories--Determination of phosphorus pentoxide content--Molybdenumblue photometric method67 GB/T 7320-1987 耐火制品热膨胀试验方法Test method for thermal expansion of refractory products68 GB/T 7321-1987 致密定形耐火制品试验的制样规定Rule of preparing sample for tests of dense shaped refractory products69 GB/T 8931-1988 耐火材料抗渣性试验方法Test method for the resistance of refractories to slag attack70 GB/T 10324-1988 耐火制品的分型定义Refractory products--Definitions of model71 GB/T 10325-1988 耐火制品堆放、取样、验收、保管和运输规则Refractory products--Instructions on stacking, sampling, acceptance, storage and transporting72 GB/T 10326-1988 耐火制品尺寸、外观及断面的检查方法Refractory products--Inspections of dimension, appearance and section73 GB/T 13243-1991 含碳耐火材料高温抗折强度试验方法Test method for modulus of rupture of refractories containing carbon at elevated temperatures74 GB/T 13244-1991 含碳耐火材料抗氧化性试验方法Test method for oxidation resistance of refactories containing carbon75 GB/T 13245-1991 含碳耐火材料化学分析方法燃烧重量法测定总碳量Chemical analysis method of refractories containing carbon—Determination of the total carbon—Combustion gravimetric method76 GB/T 13246-1991 含碳耐火材料化学分析方法CyDTA 容量法测定氧化镁量Refractories containing carbon—Determination of magnesium oxide content—CyDTA volumetric method77 GB/T 13794-1992 实验室用标准测温锥Pyrometric reference cones for laboratory use78 GB/T 14350-1993 锆英石耐火材料化学分析方法Chemical analysis methods for zircon refractories79 GB/T 14351-1993 熔铸氧化铝耐火材料化学分析方法Chemical analysis methods for fuse cast alumina refractories80 GB/T 14982-1994 粘土质耐火泥浆Fireclay refractory mortars81 GB/T 14983-1994 耐火材料抗碱性试验方法Test method for alkali-resistance of refractories82 GB/T 15545-1995 不定形耐火材料包装、标志、运输和储存Unshaped refractory--Packing, marking, transportation and storage83 GB/T 16546-1996 定形耐火制品包装、标志、运输和储存Shaped refractoryproducts--Packing, marking, transportation and storage84 GB/T 16555.1-1996 碳化硅耐火材料化学分析方法吸收重量法测定碳化硅量Chemical analysis for silicon carbide refractories--Determination of silicon carbide--Absorb gravimetric method85 GB/T 16555.2-1996 碳化硅耐火材料化学分析方法气体容量法测定碳化硅量Chemical analysis for silicon carbide refractories--Determination of silicon carbide--Gas volumetric method86 GB/T 16555.3-1996 碳化硅耐火材料化学分析方法气体容量法测定游离硅量Chemical analysis for silicon carbide refractories--Determination of free silicon--Gas volumetric method87 GB/T 16555.4-1996 碳化硅耐火材料化学分析方法EDTA容量法测定三氧化二铝量Chemical analysis for silicon carbide refractories--Determination of alumina--EDTA gas volumetric method88 GB/T 16555.5-1996 碳化硅耐火材料化学分析方法邻二氮杂菲光度法测定三氧化二铁量Chemical analysis for silicon carbide refractories--Determination of ferric oxide--0-phenanthroline photometric method89 GB/T 16555.6-1996 碳化硅耐火材料化学分析方法测定二氧化硅量Chemical analysis for silicon carbide refractories--Determination of silicon dioxide 90 GB/T 16763-1997 定形隔热耐火制品的分类Shaped insulating refractory products-classification91 GB/T 5071-1997 耐火材料真密度试验方法Refractory materials-Determination of true density92 GB/T 7322-1997 耐火材料耐火度试验方法Test method for pyrometric cone equivalent(refractoriness) of refractories93 GB/T 17105-1997 致密定形耐火制品分类Classification of dense shaped refractory products94 GB/T 17106-1997 耐火材料导热系数试验方法(平行热线法) Refractory materials--Determination of thermal conductivity--Hot-wire method(parallel)95 GB/T 2273-1998 烧结镁砂Sintered magnesia96 GB/T 17601-1998 致密定形耐火制品耐硫酸侵蚀性试验方法Dense shaped refractory products--Determination of resistance to sulfuric acid97 GB/T 5072.1-1998 致密定形耐火制品常温耐压强度试验方法(无衬垫仲裁试验) Dense, shaped refractory products--Determination of cold compressive strength--Part 1: Referee test without packing98 GB/T 2992-1998 通用耐火砖形状尺寸Dimensions of general bricks99 GB/T 17617-1998 耐火原料和不定形耐火材料取样Refractory products--Sampling of raw materials and unshaped products100 GB/T 3997.1-1998 定形隔热耐火制品重烧线变化试验方法Shaped insulating refractory products--Determination of permanent Change in dimension on heating 101 GB/T 3997.2-1998 定形隔热耐火制品常温耐压强度试验方法Shaped insulating refractory products--Determination of cold crushing strength102 GB/T 5989-1998 耐火制品荷重软化温度试验方法(示差--升温法) Refractory products--Determination of Refractoriness-under-load(differential-with rising temperature)103 GB/T 17732-1999 致密定形含炭耐火制品试验方法Dense, shaped refractory products--Test methods for products containing carbon。

过滤性测试仪器了解详情

过滤性测试仪器了解详情过滤性测试仪器全新的滤料过滤性能测试仪能模拟袋式除尘器中滤袋的使用过程，根据标准流程对过滤材料进行老化（通常需要持续多天），待滤料性能趋于稳定，测试特定浓度气溶胶通过滤料前后"特征过滤指标'（包括压降曲线、剩余压降、过滤/清洁周期、剩余粉尘层质量以及透过滤料样品的粉尘质量等）结果可用于评价滤料在实际使用过程中的过滤效能。

适用于专业的滤料测试滤料过滤性能测试仪是为评价袋式除尘器用滤料及滤袋的动静态除尘效率、过滤性能等设计的测试仪器，通过模拟滤料在实际使用过程中的真实状况，快速猎取滤料的使用性能评价参数，精确评价过滤材料的品质、性能、寿命等。

为新型过滤材料的研发，产品质量掌握，材料性能验证等供应数据依据，是科研，检测，工业生产等领域的产品性能验证的选择。

符合多种测试标准ISO 11057 空气质量可清洁过滤介质过滤性能的试验方法ASTM D6830 判定可清洁过滤介质压降及过滤性能的测试方法VDI/DIN3926 评价可清洁式滤料的标准测试方法GB/T 6719 袋式除尘器技术要求JIS Z8909-1 集尘用过滤介质的试验方法.第1部分:过滤效率主要测试参空气先送入竖向发尘管道产生布满灰尘的脏气流。

粉尘在发尘器内随压缩空气分散，形成全都浓度后平均分布整个竖直管道並向下流淌，部分达到横向管道随吸气气流经过受试滤料，使其暴露在恒定的气流和粉尘浓度来模拟可清洁滤料的运作。

粉尘形成粉饼，导致压降增加，差压传感器实时检测受试滤料前后压降的变化。

一旦压降达到预设值，系统释放清洁压缩空气脉冲朝向脏气那面生成的粉饼，不影响气流地进行反吹清灰（在线清洁）。

之后受试滤料又重新过滤灰尘，如此周而复始。

清洁脉冲时间精确和重复性高，使每次穿过滤料的受压面平均和全都。

移除的粉饼和剩余的粉尘随垂直气流往下掉到脏气管底部的粉尘收集器。

仪器并配备脏气过滤器，使粉尘不会在受试滤料的脏气上游再分散，而导致不明确的粉尘浓度，令测量无效(特殊是重要参数：残余压降值)；此设计实现无差错的长期运作，不需因清理粉尘沉积而常常中断测量出口粉尘浓度测试滤料质量变化初始剩余压降，平均剩余压降，剩余压降增量平均过滤周期除尘效率，穿透率清灰时间，清灰周期静态除尘效率动态除尘效率出口粉尘浓度测试滤料质量变化初始剩余压降，平均剩余压降，剩余压降增量平均过滤周期除尘效率，穿透率清灰时间，清灰周期静态除尘效率动态除尘效率早在18世纪80年月，袋式除尘器就以挂袋式过滤器形式开头应用，但工作效率很低。

CHROMEGA-ALOMEGA 电阻温度计产品说明书

台式数字温度计单通道和10通道型号具有嵌入式以太网连接选件过渡连接和快速脱开热电偶单独销售。

图为TTSS-18U-6。

请访问/jtin 小型快速脱开热电偶单独销售。

图为GKMQSS-125U-6。

请访问/gjmqssU 标配完全可编程的彩色显示屏图片小于实际尺寸。

U 可选报警继电器和模拟信号输出U 可选的嵌入式互联网功能U 坚固耐用的便携式金属台式外壳，带有倾斜手柄U 单通道和10通道型号U 围绕OMEGA 的新款iSeries 仪表而制造U 高质量U 5年保修U ±0.5°C (±0.9°F)、读数的 0.03%的高精度U 用户友好，易于配置U 通用输入：热电偶、RTD 、过程电压/电流、应变（单通道型号）OMEGA ® MDSi8是一款1⁄8 DIN 尺寸(96 x 48 mm)的数字面板式安装仪表，封装在坚固耐用的台式金属外壳中，配备iSeries 可变色大屏幕。

数字尺寸是典型1⁄8 DIN 面板仪器的两倍。

iSeries 仪表具有唯一可通过编程在任何设定值或报警点上将颜色更改为绿色、琥珀色和红色的LED 显示屏。

其他选件包括隔离的可编程模拟信号输出、串行通信、Modbus 和以太网接口。

通用型温度和过程仪表（型号“i ”）可处理10种常用类型的热电偶、多种RTD 以及数种过程(DC)电压和电流范围。

在任何设定值单通道通用型和10通道专用型温度和过程输入精度：温度为±0.5°C (±0.9°F)；过程为读数的0.03%分辨率：1°/0.1°；10 μV （过程）温度稳定性： RTD ：0.04°C/°C 热电偶@ 25°C (77°F)：0.05°C/°C （冷端补偿）过程：50 ppm/°C NMRR ：60 dB CMRR ：120 dB 模数转换：双斜率读取速率：每秒3个采样数字滤波器：可编程显示屏：4位数字、9段式 LED, 10.2 mm (0.40") i32, i16, i16D, i8DV ： 21 mm (0.83")i8： 10.2 mm (0.40") 和 21 mm (0.83"), i8DH —绿色、琥珀色和红色，可按过程变量、设定值和温度单位对颜色进行编程输入类型：热电偶、RTD 、模拟电压、模拟电流热电偶导线电阻：最高100 Ω热电偶类型(ITS 90)：J, K, T, E, R, S, B, C, N, LRTD 输入(ITS 68)：100/500/1000 Ω铂传感器，两线、三线或四线；0.00385 或0.00392曲线电压输入：0 ~ 100 mV 、0 ~ 1 V 、0 ~ 10 Vdc 输入阻抗：100 mV 为10 M Ω，1或10 Vdc 为1 M Ω电流输入：0 ~ 20 mA （5 Ω负载）配置：单端极性：单极性阶跃响应：99.9%处为0.7 s小数点选择：无，温度为0.1；无，过程为0.1、0.01或0.001设定值调节：-1999 ~ 9999计数量程调整：0.001 ~ 9999计数偏移量调节：-1999 ~ +9999网络和通讯以太网：顺从标准IEEE 802.3 10Base-T 支持的协议：TCP/IP, ARP, HTTPGETRS232/RS422/RS485：可从菜单中选择；ASCII 和Modbus 协议均可从菜单中选择；编程范围为300~19.2 Kb ；完整的可编程设置功能；发送电流显示、报警状态、最小/ 最大、实际测得输入值和状态的程序RS485：寻址范围0 ~ 199连接：后面板上有DB-9连接器；可选报警器1和2（可编程）可选报警器1和2（可编程）类型：“C”型SPDT继电器，仅限30 Vrms输出操作：上限/下限、上/下、带、锁定/解锁，常开/常闭和过程/偏差；前面板配置可选模拟信号输出（可编程）：非隔离，变送0 ~ 10 Vdc或0 ~ 20 mA，最高500 Ω（仅输出1）。

ASTM标准

灰铁铸件 Standard Specification for Gray Iron Castings 经热处理的碳素钢鱼尾（连接）板，微合金鱼尾板及锻制碳素 Standard Specification for Heat-Treated Carbon Steel Joint Bars, 钢异型鱼尾板 Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, 无镀层热浸的、镀锌的、焊接的及无缝钢管的技术规范 Welded and Seamless 钢轨道钉 Standard Specification for Steel Track Spikes 钢质螺旋道钉热加工低碳钢和高碳钢垫板技术规范铸铁污水管及配件的技术规范钢筋混凝土用无节钢丝镀锌和镀锌合金钢铁制品镀层重量的试验方法锰铁合金硅铁铬铁钒铁合金管系部件用碳素钢锻件高温用无缝碳素钢管优质冷加工碳素钢棒材技术规范冷轧碳素钢带技术规范电话和电报线路用镀锌"铁"丝规格镀锌钢丝编织栏栅网镀锌刺钢丝钢铁产品的锌镀层（热浸镀锌）技术规范热处理螺旋形钢弹簧阀门、法兰和管配件用灰铁铸件钢铸件,奥氏体锰海船用结构钢钼铁合金电熔(电弧)焊钢管(NPS为16英寸和16英寸以上) 电阻焊钢管电熔(电弧)焊钢管(4英寸以上的) 热浸镀锌结构钢制品防脆裂措施和探测脆裂的程序铁钨合金规范氧化钼制品结构用高强度钢铸件钢铁制金属构件上镀锌层(热浸) 汽车ቤተ መጻሕፍቲ ባይዱ灰铁铸件不锈钢和耐热铬镍钢板、薄板及带材不锈钢和耐热铬钢板、薄板及带材电阻焊接碳素钢钢管及碳锰钢锅炉和过热器管的技术规范 Standard Specification for Steel Screw Spikes Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked Standard Specification for Cast Iron Soil Pipe and Fittings Standard Standard Articles Standard Specification for Steel Wire, Plain, for Concrete Reinforcement Test Method for Weight [Mass] of Coating on Iron and Steel with Zinc or Zinc-Alloy Coatings Specification for Ferromanganese

DS-0467-Machining-of-sealing-surfaces- 中英文对照

Table of contents Page1 Scope of application / 适用范围 (2)2 Scope of validity / 有效范围 (2)3 References / 参考文献 (2)4 Definition of sealing surface / 密封面的定义 (2)5 Production process / 生产工艺 (4)5.1 Axial sealing / 轴向密封 (4)5.2 Radial sealing / 径向密封 (4)5.3 Exceptions / 径向密封 (5)6 Insertion mold for sealing grooves / 密封槽模型 (6)7 Permitted imperfections on the sealing surfaces / 密封面上允许的缺陷 (7)7.1 Permitted imperfections requiring no reworking / 允许的不需要返工的缺陷 (7)7.2 Reworking of imperfections / 缺陷的返工 (8)8 Change management / 变更管理 (9)8.1 Handling of non-conformity reports (NCRs) / 不合格品报告（NCR）的处理 (9)8.2 Handling of technical modifications initiated by the supplier/供应商发起的技术变更的处理119 Packaging and protection of sealing surfaces / 密封面的包装和保护 (11)9.1 Protection of sealing surfaces / 密封面的保护 (11)9.2 Packaging / 包装 (11)1 Scope of application / 适用范围This Delivery Specification defines the requirements for the manufacture ofsealing surfaces and sealing grooves with surface roughness Rz5max 10(maximum peak-to-valley height = 10 μm) for static sealing elements onpressurized components.本交货规范规定了承压部件静态密封元件表面粗糙度Rz5max 10(最大峰谷高度= 10μm)的密封面和密封面槽的制造要求。

DINEN 10083[1].1

ICS 77.140.10 代替1991年10月版主题词：调质钢，供货条件，特种钢，钢材本欧洲标准EN 10083-1:1991＋A1:1996有其相应的德文标准标准前言本欧洲标准由欧洲钢铁标准化委员会（ECISS）下属第23技术小组（TC）“热处理钢材，合金钢及易切削钢；质量规范”（秘书处设在德国）编制。

与本标准有关的德国标准委员会是钢铁标准委员会（FES）下属的05“机械制造用钢”工作小组。

此外，冷轧钢带不在本标准的应用范围内。

对此将制订一个新的欧洲标准。

第2节中引用的欧洲标准（EURONORMEN）与下述的德国标准向对应：EURONORM23 见DIN 50191EURONORM103 见DIN 50601EURONORM104 见DIN 50192CR 10260-ECISS-IC 10 见DIN V 17006-100更改：与1991年10月版相比，作了下述的更改：a)修改了钢号及附加标识，并增加了材料编号b)从应用范围中删除了冷轧钢带c)对标准资料作了修改d)重新排版，编辑旧版本DIN 1661:1924-09,1929-06 DIN 1665:1941-05DIN 1662:1928-07,1930-06 DIN 1667:1943-11DIN 1662 Bbl.5, Bbl.8至Bbl.11:1993-05 DIN 17200 Bbl.:1952-05DIN 1663:1936-05,1939-12x DIN 17200:1951-12,1969-12,1984-11,1987-03DIN 1663: Bbl.7至Bbl.9:1937-02x DIN EN 10083-1:1991-10下接第2页并36页正文德国工业标准协会钢铁标准委员会（FES）第2页DIN EN 10083-1:1996-10标准附录NA（信息型）文字说明DIN 50191 端部淬火试验DIN 50192 脱碳深度的计算DIN 50601 金相学检测方法－钢铁中铁素体和奥氏体晶粒度的计算DIN V 17006-100 钢材的标识体系－钢号的附加标识；德文版ECISS-IC 10:1991欧洲标准EN 10083-1:1991.02 EUROPEAN STANDARD ＋A1:1996.08DK 669.14.018.298.3:620.1ICS 77.140.10主题词：钢铁产品，钢材，调质钢，淬火，回火，供货状态，要求，标记，标识德文版调质钢第1部分：特种钢供货技术条件（包括更改A1：1996）本欧洲标准由CEN于1991年2月12日（更改A1于1995年7月1日）批准通过。

DIN2093标准翻译

蹀簧—质量规范—尺寸第二页①前言此标准由弹簧钢标产品准委员会制定②修订此标准与DIN2093:1992-01在以下方面有所不同：a)删除了弹簧垫圈命名的列子（见第4条）。

b)第4条中加入了按照holt比列对弹簧垫圈进行分级，A、B及C级。

c)在第7条中对新的数值Ft及压力6Ⅱ，6Ⅲ和6om。

d)此标准的修订充分考虑了标准的新式条款。

符号、单位和数量完全符合国际单位系统ISO31③之前版本DIN2093:1957-07, 1978-04, 1990-09, 1992-01第三页1. 范围此标准对蹀簧的材质、生产工艺、尺寸及公差进行了规定。

包括一些图标，来说明此类蹀簧允许的变动以及疲劳寿命。

此标准里列出的要求均是最低要求。

此标准包含三种尺寸系列的蹀簧。

2 引用标准以下所提及的文件对此文件的应用是不可或缺的。

凡注明日期的引用，只有引用的版本才可适用。

凡未注明日期的引用，只有最新版本的参考文献才可适用。

DIN2092:2006，蹀簧—计算DIN50969，高强度结构钢部件耐氢感应脆性断裂性，用支柱试验和预防性测量法进行检测DIN EN 1654，铜及铜合金—碟簧及连接器用带材DIN EN 10083-1，特殊钢淬火及回火的交货技术条件DIN EN 10083-2，非合金优质钢淬火及回火的交货技术条件DIN EN 10083-3，硼钢淬火及回火的交货技术条件DIN EN 10089，热轧钢淬火及回火的技术交货条件DIN EN 10132-4 冷轧窄钢带的热处理——交货技术状态——第4部分：弹簧钢及其他用途。

DIN EN 10151，不锈钢弹簧带材一般交货条件DIN EN ISO 3269，紧固件—接收检测DIN EN ISO 6507-1 金属材料—维氏硬度检测——第1部分：试验方法DIN EN ISO 6507-2 金属材料—维氏硬度检测——第2部分：试验仪器的检测与校准DIN EN ISO 6507-3金属材料—维氏硬度检测——第3部分：基准块的校准DIN EN ISO 6507-4金属材料—维氏硬度检测——第4部分：硬度值表DIN EN ISO 6507-4金属材料—洛氏硬度检测——第1部分：试验方法（A,B,C,D,E,F,G,H,K,N,T标尺）DIN EN ISO 6508-2 金属材料—洛氏硬度检测—第2部分：试验仪器的检测与校准（A,B,C,D,E,F,G,H,K,N,T标尺）DIN EN ISO 6508-3金属材料—洛氏硬度检测—第3部分：基准块的校准（A,B,C,D,E,F,G,H,K,N,T标尺）3 术语与定义碟簧是一种环形的锥形产品，适用于承载轴向荷载。

水硬度测试仪

水硬度测试仪使用说明书北京恒奥德科技有限公司感谢您购买我公司水硬度测试仪产品，在使用本产品前请仔细阅读本操作手册，以便正确使用。

开箱检查1．仪器1台2．glz水硬度测试电极1支3．水硬度电极校正溶液/100mL（B1,B2和B3）各1瓶4．参比电极1支5．电极支架1个6．电极支架底座1个7．充电器1只8．合格证1张9．说明书1本可选购配件1．水硬度校正溶液（B1,B2和B3）2．glz水硬度测试电极3．参比电极仪器使用注意事项1.为保证仪器测量值精确可靠，测量时请在以下环境条件下使用：环境温度5-35℃,空气相对湿度≤85%，无显著振动，无强磁干扰。

2.仪器上的电极插头应保持高度清洁，并保证接触良好（有污垢可以用99﹪工业酒精擦洗）。

3.与仪器配套使用的有关电极的使用和维护保养，请务必仔细阅读有关电极使用说明书。

4.仪器使用时，要把两支电极接上，一支测试电极和一支参比电极（232）5.参比电极在使用时要拔出电极上端的橡皮帽和电极低端的橡皮塞。

6.电极在使用过程中应避免碰擦和强烈震动。

7.溶液测量和标定时，都应在磁力搅拌器搅拌下进行，为保证测量准确度，电极标定和测样时，温度、离子强度、搅拌速度等条件都要一致。

8.仪器不使用时请将仪器选择电极插口的插头接上。

9.测试前一般都要校正，但测试间隔时间较短不需要校正；或者可将电极浸入与被测溶液相近的校正溶液中，如显示值在误差范围内就不必校正了10.根据离子电极的等温测量原理，被测溶液的温度和校正溶液的温度越接近，其测量准确度就越高。

因此一般测量时，校正溶液和被测溶液的温度相差应≤±5℃；高精度测量时，校正溶液和被测溶液的温度应保持相等。

11. 当被测溶液浓度超过200 mg/L时，由于离子干扰比较大，为更好的保证测量准确度，必须将溶液稀释至200 mg/L以内再进行测试。

．水硬度单位和换算：mmol/L —水硬度的基本单位mg/L(CaCO3) —以CaCO3的质量浓度表示的水硬度，或称ppm 和美国度。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

h DIN Deutsches Institut für Normung e.V.·Jede Art der Vervielfältigung,auch auszugsweise,
nur mit Genehmigung des DIN Deutsches Institut für Normung e.V.,Berlin,gestattet.
Alleinverkauf der Normen durch Beuth Verlag GmbH,10772Berlin
Ref.Nr.DIN 85003-8:1999-11
Preisgr.05
Vertr.-Nr.0005
November 1999
DEUTSCHE NORM Technische Lieferbedingungen für Armaturen im Schiffbau
Teil 8:Kugelhähne
{85003-8
Normenstelle Schiffs-und Meerestechnik (NSMT)im DIN Deutsches Institut für Normung e.V .
ICS 23.060.10;47.020.30
Technical specifications for valves for shipboard use —Part 8:Ball valves
Conditions techniques de livraison àla robinetterie pour l’usage dans la construction navale —Partie 8:Robinetes a tounant
Vorwort
Diese Norm wurde von der Normenstelle Schiffs-und Meerestechnik (NSMT)im DIN,ArbeitsausschußNSMT 2.3.3…Rohrleitungsarmaturen“,erarbeitet.
DIN 85003Technische Lieferbedingungen für Armaturen im Schiffbau besteht aus:—Teil 1:Allgemeines
—Teil 2:Zusammenstellung möglicher Anforderungen und Prüfungen —Teil 3:Absperrklappen —Teil 4:Absperrventile
—Teil 5:Absperrbare Rückschlagventile —Teil 6:Handbetätigte Absperrschieber —Teil 7:Membranventile —Teil 8:Kugelhähne
1Anwendungsbereich Diese Norm gilt für Kugelhähne,die im Schiffbau angewendet werden.Sie legt Technische Lieferbedin-gungen für diese Armaturen fest.
2Normative Verweisungen
Diese Norm enthält durch datierte oder undatierte Verwei-sungen Festlegungen aus anderen Publikationen.Diese normativen Verweisungen sind an den jeweiligen Stellen im Text zitiert,und die Publikationen sind nachstehend aufgeführt.Bei datierten Verweisungen gehören spätere Änderungen oder Überarbeitungen dieser Publikationen nur zu dieser Norm,falls sie durch Änderung oder Über-arbeitung eingearbeitet sind.Bei undatierten Verweisun-gen gilt die letzte Ausgabe der in Bezug genommenen Publikation.DIN 3230-3
Technische Lieferbedingungen für Armaturen —Teil 3:Zusammenstellung möglicher Prüfungen DIN 85003-1
Technische Lieferbedingungen für Armaturen im Schiffbau —Teil 1:Allgemeines DIN 85003-2
Technische Lieferbedingungen für Armaturen im Schiffbau —Teil 2:Zusammenstellung möglicher Anforderungen und Prüfungen
3
Anforderungen und Prüfungen
3.1Allgemeine Anforderungen
Nach DIN 85003-1
3.2
Technische Anforderungen und Prüfungen
Siehe Tabelle 1
4
Qualitätssicherung
4.1Allgemeines Nach DIN 85003-1mit Ergänzungen nach 4.1und 4.2
4.2
Typprüfung
Als Typprüfung gelten die in Tabelle 1aufgeführten Prü-fungen.Ihre Ergebnisse sind als Grundlage für die Zulas-sung zur Lieferung nachzuweisen.Für die Typprüfung ist je ausgewählter Baugröße ein Prüfmuster zur Verfügung zu stellen.
4.3Ablieferungsprüfungen
Zum Nachweis der Einhaltung der technischen Anforde-rungen sind die in Tabelle 2aufgeführten Prüfungen vom Auftragnehmer durchzuführen.
5Lieferart
Nach DIN 85003-1
Fortsetzung Seite 2
--`,,`,,`,````,,`,,,,,`````,,,`,-`-`,,`,,`,`,,`---
Seite2
DIN85003-8:1999-11
Tabelle1
Tabelle2
Lfd.Nr Anforderung und Prüfung
Nr
nach
Tabelle1
Durchzuführen als
100%-Prüfung
Stichprobenprüfung
nach Prüfgrad2
nach DIN3230-3
1Maße und Gewichte 3.2.1—×2Oberflächen 3.2.2—×3Werkstoffe 3.2.3×—4Kennzeichnung 3.2.4×—5Bauart,Bauform,Betätigungsfunktion1) 3.2.5×—6Festigkeit/Dichtheit des Gehäuses,der Wellendurchführung 3.2.6×—7Dichtheit des Abschlusses von beiden Seiten 3.2.7×—
1))Sofern vereinbart,ist bei Kugelhähnen,für die kein Antrieb vorgesehen ist,das Losbrechmoment nach einer Standzeit
von24Stunden zu ermitteln und zu dokumentieren,nur im Rahmen einer Typprüfung.。