imds_recommendation_002_fbom
IMDS填写方法- CN
Supplier Quality
Page 47
Global Sourcing
Supplier Quality
Page 21
创建部件MDS
1,点击
Global Sourcing
Supplier Quality
Page 22
创建部件MDS
2,制作零件成分部分
零件名称,同图纸 零件号,同图纸 零件重量
单击,进入下页
Global Sourcing
Supplier Quality
如需删除某物质,选中该 物质后，点击“-”
比例部分: 有三种选择 1.介于多少,系统计算时以中间值算 2.明确的比例 3.剩余部分
Global Sourcing
Su建材料MDS
Global Sourcing
Supplier Quality
Page 19
创建材料MDS
Global Sourcing
Supplier Quality
Page 10
概况
创建产品,零件,材料的MDS,并可直接向客户递交
寻找已经在IMDS上创建的零件,材料的MDS 查看以往向顾客发送的MDS的认可情况
查看供应商提交的零件，材料的MDS， 并作出回复（接受/拒绝）
Global Sourcing
点击 后出现一个类似“查找” 的界面，不同的是此时只有“基本物质”页可选
填入物质的名称， 或CAS编号，然后 点击“查找”,进行查 找
在搜索结果中点中正确的物资，然后点 击”应用”联到材料中去
Global Sourcing
Supplier Quality
Page 17
创建材料MDS
一种物质填加完成后,再点击材料”material”,继续增加物质
TF卡座规格大全
4/31!4/31!5/563/512/311/:61/222/1126/11MSPN09A REV.SHEET SCALE .X°± 2°X.°± 5°.XX°± 1°.XXX°± 0.5°.XXX± 0.10.XX± 0.20.X± 0.30X.± 0.40PROJ.UNIT APPROVAL CHECKED TITLE DRAWN DWG NO.B C D E F G H I I H G F ED AC B Proconn Technology Co., Ltd.J J PART NO.mmGENERAL TOLERANCE CUSTOMER DRAWING PROCESS COMPLIANT Pb -01-D GND WITHOUT CARD CARD INSERTED (#10)(#9) PATENTS PENDING. ARE COVERED BY PATENTS AND/OR 2.ALL RIGHTS RESERVED,PRODUCTS )TE!DBSE!DJSDVU!;(#9(#10)GND C/D 1.THIS PRODUCT DOESN'T CONTAIN ENVIRONMENTAL HAZARDOUS MATERIALS PER DIRECTIVE 2002/95/EC FOR RoHS.C/D Micro SD Normal push-push Type Connector 4:1D /21MSPN09-X0-0000D M B Dbse!Tmpu .B.1/96!2/21!2/:11/7122/261/211/16.1/16,B!!)23!;!2* A -- CONTACT UNLEAD PLATING: A:GOLD FLASH C:10ȝ" GOLD NOTES : 1. MATERIAL : INSULATOR : HIGH TEMPERATURE THERMOPLASTIC FLAMMABILITY RARING : UL94V-0 COLOR : BLACK CONTACT : COPPER ALLOYS COVER : COPPER ALLOYS 2. CONTACT AREA PLATING : GOLD OVER Ni C/D : MICRO SD CARD CARD DETECT INDICATION 3. P/N : MSPN09- X0-0000T A 1/4B C D D EN030807 BOB :/61:/:1y3!2/21!9/111/911/41QSPDPOO YYYYYYYEBUF!DPEFQSPDPOO!MPHP!!!!DBSE DFOUFS!MJOF 25/81.X°± 2°X.°± 5°.XX°± 1°.XXX°± 0.5°.XXX± 0.10.XX± 0.20.X± 0.30X.± 0.40UNIT APPROVAL CHECKED TITLE DRAWN Proconn Technology Co., Ltd.PART NO.GENERAL TOLERANCECUSTOMER DRAWING Micro SD Normal push-push MSPN09-X0-0000YYYYYYY YYYYYYYNOTES :1.Material :Housing/Slide : High temperature thermoplastic,UL94-V0. Housing Color : Black/Slide Color11.10 0.05NOTES :1.Material :Housing/Slide : High temperature thermoplastic,UL94-V0. Housing Color : Black/Slide Color11.10 0.05OPUFT!;!2/!NBUFSJBM!;!!!!!JOTVMBUPS!;!IJHI!UFNQFSBUVSF!UIFSNPQMBTUJD!!!!GMBNNBCJMJUZ!SBSJOH!;!VM:5W.1!DPMPS!;!CMBDLProconn Technology Co., Ltd.MICRO SD REV. PUSH-PUSH TYPE (H=1.8mm)DWG NO.MSPR09-15-BMICRO SD REV. PUSH-PUSH TYPE (H=1.8mm).X°± 2°X.°± 5°.XX°± 1°.XXX°± 0.5°TITLE Proconn Technology Co., Ltd.PART NO.GENERAL TOLERANCECUSTOMER DRAWING2/96²1/2²1/21/4²1/23/21.THIS PRODUCT DOESN'T CONTAIN ENVIRONMENTAL HAZARDOUSmm .nd hold on the products sur fa ce DWG NO.Proconn Technology Co., Ltd.1.THI S PRODUCT DOE S N'T CONT A M S PN10-09-0-4000D Push Nor ma l Type(H=1.50mm ).X °± 2°X .°± 5°.XX °± 1°.XXX °± 0.5°TITLEProconn Technology Co., Ltd.PART NO.L TOLER A NCETOMER DR A WING1.THI S PRODUCT DOE S N'T CONT A M SInput M a teri a l Direction1.THI S PRODUCT DOE S N'T CONT Arton P a per Connector Other bel P a perReel P S rrier T a pe P Sˠ˦˛ˡ˃ˋˀ˔˃ˀ˃˃˄ˆˠ˦˛ˡ˃ˋˀ˔˃ˀ˃˃˄ˆˠ˦˛ˡ˃ˋˀ˔˃ˀ˃˃˄ˆ。
F-M 《IMDS提交指导》
Function / BU name
Data classification: Internal
Function / BU name
Data classification: Internal
mm/dd/yyyy
3
IMDS Supplier Guidelines
From the “System” page, go to the upper left hand of the page and click on the “System” tab. Next, click on the “Online Registration” link.
Function / BU name
Data classification: Internal
mm/dd/yyyy
6
IMDS Supplier Guidelines
Go back to the International Material Data System (IMDS) website, at in your web browser or link. Now go to (System login) and select.
IMDS Supplier Input
The International Material Data System (IMDS)
10/03/2008
Data classification: Internal
IMDS Supplier Guidelines
To find the International Material Data System (IMDS) website, go to in your web browser or link.
nidec mobility corporation - 供应商- IMDS 数据填报手册说明书
1st August, 2023NIDEC MOBILITY CORPORATION Quality Planning Department,Quality Management Division,NIDEC MOBILITY CORPORATION目录1前言 (3)2IMDS(International Material Data System)的概要 (3)3用语的定义 (3)4IMDS的运作方式 (4)4.1IMDS数据提交对象 (4)4.2填报新数据表和数据表的更新 (4)4.3IMDS数据填报流程 (4)4.4数据被拒绝时的应对方法 (5)4.5含有支给部品/支给材料的IMDS数据表的填报 (5)5IMDS数据的填报 (6)5.1要求事项 (6)5.2材料数据的填报 (7)5.2.1材料分类的选择 (7)5.2.2材料信息的填写 (9)5.2.3包含循环材料的材料填报 (11)5.2.4基本物质的填报 (12)5.2.5化学制品(Process chemicals)的填报 (13)5.3半成组件的填报 (14)5.3.1子级节点数据的添加 (15)5.4组件的填报 (17)5.4.1子级节点的添加 (19)5.4.2聚合物标注 (21)5.4.3物质应用代码 (22)5.5多源的填报 (25)5.5.1多源的数据填报 (25)5.5.2重量偏差 (26)6接收人信息的填报 (27)6.1发送MDS时的填写项目 (28)7联系人 (30)8关于窗口登记 (31)9本手册的改订 (31)1前言本手册规定了NIDEC MOBILITY CORPORATION以及其集团公司1(以下简称为本公司)对部材IMDS数据的填报要求。
请依据本手册填报发送给本公司的IMDS数据。
本手册中的未尽事项，请参照相关IMDS准则2或是DXC Technology公司提供的《材料数据系统(IMDS)用户手册3》等教程。
IMDS023 规则
IMDS Recommendation IMDS 023“Preliminary” MDS during the Prototype Phase1 PurposeThis standard describes the general requirements for creation of “preliminary” Material Data Sheets (MDS) within IMDS during the Prototype Phase (also called e.g. Design Phase, Pre-Production…).The purpose of these “preliminary” MDS during Prototype Phase is to enable the requesting car manufacturer to receive material information on the used parts in an early stage of the vehicle development process. This will support the calculation of e.g. Quotas of Recyclability as legally demanded with the Type Approval Directive 70/156/EEC.For specific timing to deliver MDS get in contact with your customer.2 ReferencesIMDS 001, VDA 231-106, ISO 22628, 70/156/EEC, 2005/64/EC, GADSL3 Definitions3.1 Prototype PhaseAt the beginning of the Prototype Phase, the supplier is requested to submit parts and corresponding papers to document them. Together with these documents, material information and any known GADSL Substance should be electronically reported in IMDS.The MDS should describe the part as it will be for serial production. The material variants used exclusively for the prototypes that will not go into final production do not need to be documented.The marking as “preliminary” MDS is performed in the IMDS in the field: “Development Sample Report”(see Figure 1).Figure 1IMDS Recommendation IMDS 0233.2 Degree of Details3.2.1 GeneralThe degree of details to be given on the requested MDS in the Prototype Phase can be limited to the Material Classification according to VDA 231-106 (currently used as the classification list in IMDS), the material weight and the total part weight, and any known GADSL substance. The Material Classification is the basis to be able to calculate recyclability according to ISO 22628.The part weight information has to be given in such a tolerance range as the production process tolerances of the part.If the supplier can inform the customer about any known GADSL substance in the “preliminary” MDS during the Prototype Phase, it will resolve potential non-compliance issues much earlier in the vehicle development process to avoid late changes.It is not necessary to enter data in the Chapter >Recyclate information<.3.2.2 “Preliminary” MDSRequested information for a “preliminary” MDS:•Part Levelo Part numbero Part nameo Part weighto Mark “Development Sample Report”•Material Level:o Material Classification acc. to VDA 231-106o Material weighto Mark “Development Sample Report”•Substance Level:o Wild card …not yet specified, not to declare“ with a percentage of 100% can be usedo GADSL substances, if known in this early stageTo create “preliminary” MDS there are available published MDS on Material Level in IMDS. This MDS are called “ProtMat...” (see Paragraph 4.1)3.2.3 “Final” MDSRequested information for a “final” MDS:•All information according to the Recommendation IMDS001 (and further relevant Recommendations)The published MDS on Material Level in IMDS (see Paragraph 3.2.2) including the Wild card …not yet specified, not to declare“ will not be accepted for “final” MDS.3.2.4 MDS StructureIt is recommended to use the final structure of the part in “preliminary” MDS. By updating the MDS the “preliminary” MDS will become the “final” MDS.For carry over-parts and their relevant existing MDS used in a new assembly, a reference to this existing “final” MDS is recommended.IMDS Recommendation IMDS 0233.3 TimingTo comply with the new Type Approval Directive 70/156/EEC, the “preliminary” MDS must be transmitted earlier than the “final” MDS is requested.After a supplier is nominated, the supplier may send the data through IMDS, but when first prototype parts are delivered together with the quality documentation, the supplier must send MDS electronically according to the timing agreed with the customer.A “final” MDS is to be made available in the IMDS together with the Initial Sample Test Report. According to the vehicle development process there is a starting point for the Initial Sample Report, all “preliminary” MDS are to be completed by the supplier in this time frame and transmitted as “final” MDS for evaluation.4 Examples4.1 Published “preliminary” MDSFigure 2IMDS Recommendation IMDS 023Figure 34.2 Overview on different Phases- timings are different between the OEM’s- timings are depending on the specific projects (e.g. complete new car, major changes etc.)-For specific timing requirements, please refer to your customer documentation Figure 4: Showing an example 100%Only for components in thedevelopment phase.Material must not be used inthe Initial Sample Report.IMDS Recommendation IMDS 023 5 Release and Revisions5.1 ReleaseThe recommendation was first approved and released on February 15th 2007.5.2 RevisionRev.Date Description / Reason Originating Organization / Committee。
海康威视产品说明书.pdf_1718726225.5382066
PNP/
AM6/AP-1A AM6/AP-1C AM6/AP-1H AM6/AP-2A AM6/AP-2C AM6/AP-2H AM6/AP-3A AM6/AP-3H AM6/AP-4A AM6/AP-4H
NPN/NC
AM6/CN-1A AM6/CN-1C AM6/CN-1H AM6/CN-2A AM6/CN-2C AM6/CN-2H AM6/CN-3A AM6/CN-3H AM6/CN-4A AM6/CN-4H
4
8
available models
DC 2 wires models
diameter M12
installation shielded
unshielded shielded
unshielded
distance standard
long distance
connection
cable M12 cable M12 cable M12 cable M12
weight
1...20%
12x12 mm FE 360
24x24 mm FE 360
5% UB 20-30 V Ta = 23°C ± 5°C
10...30 Vdc
≤ 10%
NPN or PNP - NO or NC (3 wires models), NPN/PNP - NO (2 wires models)
2 kHz (750 Hz for 2 wires)
50 ms
-25...+70 °C
10%
IEC/EN60947-5-2
30 g connector (20 g short body) 70 g cable (60 g short body)
IMDS操作指南
南京瑞旭产品技术有限公司
IMDS 介绍—IMDS演示
基本物质
标记为需申报(D) 的物质在产品的结构树中显示为蓝色
同时标记为需申报(D) 和被禁止(P) 的戒仅标记为被禁止(P) 的物质在 产品的结构树中显示为红色 REACH-SVHC将会在产品结构树里以下划线标出
IMDS 介绍—IMDS演示
任务栏
主 菜 单
工作区
南京瑞旭产品技术有限公司
IMDS 介绍—IMDS演示
任务栏
南京瑞旭产品技术有限公司
IMDS 介绍—IMDS演示
准 则
南京瑞旭产品技术有限公司
REACH
REACH
注册 授权 限制 通报
欧盟境内 责任人
物品 配制品 物质 进口商，制造商，OR（唯一代表）
南京瑞旭产品技术有限公司
IMDS相关法规—REACH
REACH下的责任和义务
BOS
• 化工原料 • 天然原料
中游企业
• 零部件 • 半成品
• 商品 • 消费品
分 类
“D”类 - 如果超出门限值，该物质必须报告。但该物质不被禁止在汽车零 部件中使用。“D / P”类 - 在某些应用中禁止使用在所有其他情况下申报。 请于GADSL的有关文件查看详细信息。 “P”类 - 在所有的应用中禁用。
南京瑞旭产品技术有限公司
IMDS 介绍—IMDS系统
ROH S WEE E ELV
南京瑞旭产品技术有限公司
IMDS相关法规—ELV指令
ELV指令中的预防原则
南京瑞旭产品技术有限公司
IMDS相关法规—ELV指令
f_material_no翻译 -回复
f_material_no翻译-回复f_material_no指的是某种材料的编号。
以下是一篇关于材料编号的文章。
材料编号的重要性及其应用范围材料编号是一种为了更好地管理和追踪材料在生产和供应链过程中的使用情况而采用的方法。
它可以为每种材料分配一个独一无二的标识符，以便在各个环节中进行跟踪和识别。
这种编号系统在许多行业中都得到了广泛的应用，如制造业、建筑业以及物流业等。
首先，材料编号对于制造业来说具有重要意义。
在制造业中，一种产品通常由多种不同的材料组成。
每种材料都有其特定的特性和功能，对产品的质量和性能都有着关键的影响。
通过给每种材料编上编号，制造商可以更好地管理材料的进货和使用情况，以确保制造出的产品符合质量要求。
此外，材料编号还可以用于跟踪材料的来源和供应商信息，以便在有需要时能够快速定位和解决潜在的问题。
另外，材料编号在建筑业中也扮演着重要的角色。
建筑项目通常需要大量的材料，如钢材、水泥、砖块等。
通过给这些材料编上编号，施工方可以在项目进行过程中更好地跟踪和管理各种材料的使用情况，确保施工进度和质量的控制。
此外，材料编号还可以用于在施工后的维护和保养过程中对材料进行追踪，以便更好地管理设备和材料的寿命和维修工作。
物流业也是材料编号的应用领域之一。
在物流业中，准确、高效地管理和追踪物资的来源和使用情况是至关重要的。
通过给每种运输材料编上编号，物流公司可以更好地进行物资流动的规划和管理，减少运输时间和成本。
同时，物流公司还可以利用材料编号来提高货物配送的准确性和效率，确保货物按时送达目的地。
在使用材料编号时，还需要遵循一些基本原则和步骤。
首先，每种材料的编号应该是独一无二的，以避免混淆和错误。
其次，材料编号应该简洁明了，易于识别和记忆。
最后，建立一个完善的系统来记录和管理材料编号是非常必要的，以便能够方便地查找和使用。
综上所述，材料编号在各个行业中都具有重要的应用价值。
它可以帮助企业更好地管理和追踪材料的使用情况，保证产品质量和供应链的顺畅运作。
IMDS编号分类说明
IMDS编号分类说明IMDS001 建议的附录I IMDS 001a 目录1IMDS 中的材料分类 (3)1.1IMDS 中材料分类的选择 (3)1.2特殊材料 (13)2示例 (14)2.1汽车润滑剂（材料分类9.2）的特定要求 (14)2.2有关为热塑性塑料（材料分类5.1.x）创建MDS 的更多信息 (16)2.3有关为热塑性弹性体（材料分类5.2）创建MDS 的更多信息 (20)2.4有关为弹性体/弹性体化合物（材料分类5.3）创建MDS 的更多信息 (21)2.5为热塑性塑料、TPE 和/或弹性体的复杂产品创建MDS (22)3修订 (25)IMDS001 建议的附录I IMDS 001a1 IMDS 中的材料分类1.1 IMDS 中材料分类的选择MDS 中材料的分类系统由材料的构成（材料中的物质）、生产[分类1 – 4, 7]、属性[分类5] 和应用[分类6, 8, 9] 混合组成。
材料最好应根据其构成而不是根据其应用来进行分类。
电子应用领域的材料应根据其构成（例如，铜，而不是电子）来进行分类。
塑料材料应首先根据其属性进行分类。
分类应尽可能详细。
例如，如果可能，避免使用分类 1.1，而是使用 1.1.1 或1.1.2。
在IMDS 中，每种均质材料均必须作为单独材料加以说明。
“均质”是指材料构成一致，不能机械分离为两种或更多不同材料。
此处的“机械分离”是指一般可以通过切割、修剪和研磨来分离材料。
例如，塑料、金属、合金和涂层都是均质材料。
而诸如带有涂层的金属（例如：电镀镀锌钢或带有PVC 涂层的铜丝）或分层构成的材料（例如：用聚合物塑模的铜）之类的材料则很可能不是均质的，每层均需作为单独材料加以说明，必须说明每种材料的相应分类，例如，对于锌涂层，分类为 3.3。
禁止对材料进行元素分解。
材料必须依其在车辆上出现的样态进行报告。
例如，如果说明一种聚合物，您需要说明其固化状态，而不是制程化学品。
IMDS介绍及使用实例课件
23。输入该物质相应的内容
2020/12/28
2020/12/28
24。同样的方法输入所有物质信息
25.输入联系人 信息
2020/12/28
26.接着将此材料进行内部发布
2020/12/28
27. 创建组件
2020/12/28
2020/12/28
29.接着点击，添加材料
28.填入“命名”，零件号，测量值，重量偏差
2020/12/28
2020/12/28
2020/12/28
2020/12/28
2020/12/28
2020/12/28
2020/12/2020/12/28
主机厂审批表单简单演示
2020/12/28
2020/12/28
使用帐号进行登陆
2020/12/28
2020/12/28
2020/12/28
2020/12/28
2020/12/28
结语
谢谢大家！
2020/12/28
65
谢谢观赏
缝线
带子
木材/ 2020/12/28
半成品 半成品 组件
19。点击”材料”，首先开始创建材料
2020/12/28
2020/12/28
2020/12/28
20。选择材料的分类，点击“下一个”
21。点击此处，添加物质信
2020/12/28
21。填入相关信息。
22。输入相关信息，进行查找
2020/12/28
发 布 车 辆 拆 解 信 息 (ID IS) 免费从最后车主手中回收报废汽车
在用车
免费从最后车主手中回收报废汽车
新备件的重金属 禁用
在 2003年 7月 以 后 生 产 的 汽 车 所 用 备 件 在 2007年 7月 前 生 产 的 汽 车 所 用 备 件
imds_recommendation_001_annex_I_zh
目录1IMDS 中的材料分类 (2)1.1IMDS 中材料分类的选择 (2)1.2特殊材料 (12)2示例 (13)2.1汽车润滑剂（材料分类 9.2）的特定要求 (13)2.2有关为热塑性塑料（材料分类 5.1.x）创建 MDS 的更多信息 (15)2.3有关为热塑性弹性体（材料分类 5.2）创建 MDS 的更多信息 (20)2.4有关为弹性体/弹性体化合物（材料分类 5.3）创建 MDS 的更多信息 (20)2.5为热塑性塑料、TPE 和/或弹性体的复杂产品创建 MDS (21)3修订 (24)IMDS001 建议的附录 I IMDS 001a1 IMDS 中的材料分类1.1 IMDS 中材料分类的选择MDS 中材料的分类系统由材料的构成（材料中的物质）、生产 [分类 1 – 4, 7]、属性 [分类 5] 和应用 [分类 6, 8, 9] 混合组成。
材料最好应根据其构成而不是根据其应用来进行分类。
电子应用领域的材料应根据其构成（例如，铜，而不是电子）来进行分类。
塑料材料应首先根据其属性进行分类。
分类应尽可能详细。
例如，如果可能，避免使用分类 1.1，而是使用 1.1.1 或1.1.2。
在 IMDS 中，每种均质材料均必须作为单独材料加以说明。
“均质”是指材料构成一致，不能机械分离为两种或更多不同材料。
此处的“机械分离”是指一般可以通过切割、修剪和研磨来分离材料。
例如，塑料、金属、合金和涂层都是均质材料。
而诸如带有涂层的金属（例如：电镀镀锌钢或带有 PVC 涂层的铜丝）或分层构成的材料（例如：用聚合物塑模的铜）之类的材料则很可能不是均质的，每层均需作为单独材料加以说明，必须说明每种材料的相应分类，例如，对于锌涂层，分类为 3.3。
禁止对材料进行元素分解。
材料必须依其在车辆上出现的样态进行报告。
例如，如果说明一种聚合物，您需要说明其固化状态，而不是制程化学品。
如果将气体、液体或制程化学品作为基本物质，则需要确认其是否在提供给客户的最终（硬化及干燥后的）零件中仍然存在。
imds_recommendation_001_general_structure
IMDS General Rules and Guidelines
IMDS 001
General Rules and Guidelines for IMDS Material Datasheets
1 Purpose ................................................................................................................................... 2 2 References .............................................................................................................................. 2 3 General IMDS Reporting and Change Management ............................................................... 3 3.1 General Reporting............................................................................................................. 3 3.2 Change Management ....................................................................................................... 3 4 Datasheets (MDSs/Modules) ................................................................................................... 5 4.1 Structure ........................................................................................................................... 5 4.2 Components ..................................................................................................................... 6 4.3 Semi-components ............................................................................................................. 7 4.4 Materials ........................................................................................................................... 8 4.5 Basic Substances ........................................................................................................... 15 5 Special Cases ....................................................................................................................... 20 5.1 (Highly) Confidential Substances in Plastics Masterbatches ........................................... 20 5.2 Flat BOM (FBOM) Reporting Method .............................................................................. 21 6 Recommendation 001 Release and Revisions ...................................................................... 22 6.1 Release .......................................................................................................................... 22 6.2 Revisions ........................................................................................................................ 22
IMDS-CAMDS操作指导
6.1 涂料
1.1 钢/铸钢/烧结钢
3.5 铅
6.2 胶粘/密封剂
1.1.1 非合金钢（碳钢），低合金钢
4 特种金属
6.3 防蚀涂层
1.1.2 高合金钢
4.1 铂/铑
7 其它材料和混合/化合物
1.2 铸铁
4.2 其它特种金属
7.1 改性有机天然材料(皮革,木材,纸板等)
1.2.1 灰口铸铁
5 聚合物材料
步骤3
步骤4
注册时只能用英文和数字
IMDS的创建（V8.0）
1、点此登录系统
2、输入用户名和密码
3、创建材料
4、根据材料成分 选择材料分类
根據下列材料成份表相對應中文對照表选择材料分类;
點擊采用
材料成份中英文對照表
0 未定义的(其它材料)
3.3 锌合金
6 其它高分子材料
1 钢铁材料
3.4 镍合金
5.3 橡胶
9 燃料和其它液体
2.1.2 变形铝合金
5.4 热固性塑料
9.1 燃料
2.2 镁及镁合金
5.4.1 聚氨酯
9.2 润滑剂
2.2.1 铸造镁合金
5.4.2 不饱和聚酯
9.3 刹车液
2.2.2 变形镁合金
5.4.3 其Βιβλιοθήκη 热固性塑料9.4 冷却液2.3 钛及钛合金 3 重金属,铸造/变形合金
3.1 铜(线束)
本企业信息
10、下拉菜单选 择
11、点击“下一步” 或者点击左边菜单栏 “发送状态信息”
12、内部发布 以上为创建材料的步骤，创建部件与创建材料一样，只多了一步添加接收人
13、创建部件
17、添加刚才创 建好的材料
14、输入TTE大致品名 （请不要输入机种）
Cover Sheet 初始样品检验报告封面
ID No. / DUNS-Code:
ID number:
Report no. / Index:
/
Report no. / Index:
/To be completed by customer
Name:
Name:
Part number:
Part number:
Drawing number:
Date
Signature
Process-related and other documentsStatusDate:
Sheet:of
11 Design-FMEA
18Inspection device capability verification
12Construction release
19 EUSafety data sheet
23 Processacceptance
17Test equipment list
24Others
Supplier / Production location:
Customer:
ID no. /DUNS-Code:
ID number:
Report no./ Index:
/
Report no./ Index:
Status / Date:
Enclosure
Status / Date:
Type,extentand description of the enclosures
01Dimension test
02Function test
03Materials test
04 Haptictest
05Acousticstest
imds_recommendation_005_leather
IMDS Recommendation IMDS 005Leather1 PurposeThis recommendation describes the general requirements for creation of Material Data Sheets for leather within IMDS.Diese Empfehlung beschreibt die generellen Anforderungen für die Erstellung von Materialdatenblättern für Leder im IMDS.2 ReferencesIMDS 011, IMDS 0123 DefinitionsLeather should be implemented as semicomponent.The skin and finish should be edited as componentThe range for the substances can be max. +/- 5 % of weight.The declaration of substances has to be done according VDA / VCI agreement from 17.10.2001.Das Leder wird als Halbzeug angelegt.Haut und Zurichtung werden als Werkstoffe untergeordnet.Spannweiten von +/- 5 Gew.% verwendet werden.Die Deklaration der Reinstoffe erfolgt nach VDA / VCI Vereinbarung vom 17.10.2001.IMDS Recommendation IMDS 005 In the semicomponent …name of Leather article“ the article name should be specified.The subordinate material layers describe the tanned leather and the finish. In the name for the tanned leather the animal (cow / water buffalo) and the kind of tanning (chromium or vegetabile tanning) are mentioned.The finish is described by the resin components named in table 1, pigments and the other substances remaining in and on the finish.The link of the semicomponent to the part is done by the processor (this includes sets of stamped parts)If possible the semicomponent should be labeled with the part / item number of the OEM.Wildcards may only be max. 5 % of the entire semicomponent. A wildcard is e.g. a substance like …Miscellaneous“. …Basic Duromer: Acrylic resin (Compound of a polymeric network)“ does not cout a a wildcard.Im Halbzeug …Lederartikelbezeichnung“ wird der Artikelname genannt.Die untergeordneten Werkstoffebenen beschreiben das gegerbte Leder und die Zurichtung. Im Namenfür das gegerbte Leder wird das Tier (Rind / Wasserbüffel) und die Art der Gerbung (Chrom- oder vegetabile Gerbung) genannt.Die Zurichtung wird u.a. über die in Tabelle 1 gelisteten Harzkomponenten, Pigmente und sonstige in und auf der Zurichtung verbleibende Substanzen beschrieben.Die Zuordnung des Halbzeuges zu Bauteilen erfolgt beim Verarbeiter (gilt auch für Stanzteilsets). Nach Möglichkeit soll das Halbzeug mit der Sach-/Teilenummer des OEM gekennzeichnet sein. Wildcards dürfen maximal 5 % des gesamten Halbzeuges ausmachen. Unter Wildcards fallen Reinstoffe wie …sonstiges“. Z.B. …Basisduromer: Polyurethanharz (Teil eines polymeren Netzwerkes)“ ist kein Wildcards.IMDS Recommendation IMDS 005 4 ExamplesDescription of a leather article / Darstellung eine LederartikelsIMDS Recommendation IMDS 005 Description of a laminated leather / Darstellung eine kaschierten Leders:IMDS Recommendation IMDS 005 1 Basic Duromer: Acrylic resin (Compound of a polymeric network)Basisduromer: Acrylharz (Teil eines polymeren Netzwerkes)2 Basic Duromer: Cellulose Acetate Butyrate resin (Compound of a polymeric network)Basisduromer: Cellulose Acetat Butyrat Harz (Teil eines polymeren Netzwerkes)3 Basic Duromer: Melamine resin (Compound of a polymeric network)Basisduromer: Melaminharz (Teil eines polymeren Netzwerkes)4 Basic Duromer: Nitrocellulose resin (Compound of a polymeric network)Basisduromer: Nitrocelluloseharz (Teil eines polymeren Netzwerkes)5 Basic Duromer: Polyester resin (Compound of a polymeric network)Basisduromer: Polyesterharz (Teil eines polymeren Netzwerkes)6 Basic Duromer: Polyurethane resin (Compound of a polymeric network)Basisduromer: Polyurethanharz (Teil eines polymeren Netzwerkes)7 Basic Duromer: Siloxane resin (Compound of a polymeric network)Basisduromer: Siloxanharz (Teil eines polymeren Netzwerkes)Table 1: most common bindersTabelle 1: häufigste Bindemittel5 ApprovalCompany Name Sign Adam Opel AG A. HeymannBayerische Motoren Werke AG Dr. K. Oldenburg-NazarukDaimlerChrysler AG Dr. H. TraiserDr. Ing. h.c.F. Porsche AG G. AschauerFiat Auto Dr. C. BeruttiFord Motor Company Dr. B. SchmitzVolkswagen Gruppe H. Lüßmann-GeigerVolvo Car Corporation J. LundströmDesaegerToyota M.IMDS Recommendation IMDS 0056 Release and Revisions6.1 ReleaseThe recommendation was first approved and released on 19.02.2003.6.2 RevisionRev. Date Description / Reason Originating Organization / Committee 7 Cooparation and AssistanceBMW Group,Bader GmbH & Co.Lederfabrik Vogl GmbH & Co KG。
imds_recommendation_004_textiles
IMDS RecommendationIMDS 004Textiles/Fibres1 PurposeThis recommendation outlines the general requirements for the creation of Material Data Sheets (MDS) for fibre products. Products can be e.g. textiles, fabrics, fleece which are used for seats or seat belts. The recommendation covers also fibre reinforcements for plastic (see Recommendation IMDS 010) or elastomer components like tires or fuel hoses (see Recommendation IMDS 003). The recommendation describes Man-made Fibres and Natural Fibres in accordance with ISO 2076 and ISO 6938. It shall be used to report comprehensive fibre product compositions thus enabling the automobile manufacturers to demonstrate compliance with legal and proprietary requirements. The description of a fibre material product should include the base fibre substances, pigment portions, flame retardants or water/dust repelling substances as they remain in/on the product. Substances which do not remain on the product, e.g. if they are washed out in a washing process, need not be declared.2 ReferencesIMDS 001, IMDS 003 (Elastomers), IMDS 010 (Polymers), IMDS 017 (FRPs, Fibre reinforced plastic products, Thermosets), ISO 2076 (Man-made fibres), ISO 6938 (Natural fibres)3 Definitions3.1 Base Material (Fibre)For textiles often man-made fibres or natural fibres are used. You can find these substances in the IMDS-substance list by searching “man-made fibre” or “natural fibre”.Search for …Man-made fibre“ in the substance list of IMDS.004 IMDS Recommendation IMDSResult: List of 23 different kind of man-made fibres in accordance with ISO 2076.Aramid-Fibre as an example for a man-made fibreSearch for …Natural Fibre“ in the substance list of IMDS.IMDS Recommendation IMDS004Result: List of 60 different kind of natural fibres in accordance with ISO 6938Please note that natural fibres are often called …?-hair“ or …?-wool“ and not only …?-fibre“.3.2 PigmentsIn many cases the fibres have a content of pigments (man-made fibres) or they are coloured by acolouring agent. The content of this agent/pigments which remains on (or in) the fibre has to be declared.If the substance is part of the GADSL-list, it has to be declared with his scientific name (Example: Cobaltchromite blue spinell as pigment).Cobalt chromite blue spinell as pigment. This pigment has to be declared on the substance level.Otherwise, if the substance is not part of the GADSL-list, the substance can be declared as wild card“Pigment portion”. In this case the sum of “wild cards” must NOT exceed 5% of the material (coloredfibre).In the case you have different types of colour (e.g. light and dark), you can describe the material byusing the highest content of colour/pigments (worst case).004 IMDS Recommendation IMDS3.3 Further AdditivesAdditives like flame retardants or water/dust repelling substances as they remain on the product have tobe declared. If they are part of the GADSL-list, they have to be declared with their scientific name.Otherwise the following wild cards can be used:Wild cards which can be used to describe non declarable substances of the GADSL-list.Please make shure that the sum of the wild cards doesnt exceed 5% of the material (by weight).4 ExamplesPigment portion (If any)[jokersubstance 5% max]Pigment portion (If any)[jokersubstance 5% max]004 IMDS Recommendation IMDS5 This document is recommended byAdam Opel AGBayerische Motoren Werke AGDaimlerChrysler AGDr. Ing. h.c.F. Porsche AGFiat AutoFord Motor CompanyToyota Motor CorporationVolkswagen GroupVolvo Car Corporation6 Release and Revisions6.1 ReleaseThe recommendation was first approved and released on February 2003.6.2 RevisionRev. Date Description / Reason Originating Organization / Committee02 June 2005 ILRS to GADSL IMDS Material Services01 July 2004 Man-made fibres and natural fibres addedIMDS-SCas basic substances in the data base,editorial changes.7 Cooperation and AssistanceExpert group TextilMichael Pöhlig, Textil AssociationFr. Dr. Oldenburg-Nazaruk, BMWDr. Helmut Traiser, EDS。
f_material_no翻译
f_material_no翻译f_material_no的翻译是“F物料号码”。
F物料号码是指在物料管理系统中对不同物料进行唯一标识的编号。
它常用于制造业中，用于区分和管理不同的零件和原材料。
通过F物料号码，企业可以快速准确地识别和追踪物料，以实现库存管理、采购计划和生产流程的优化。
1. The f_material_no allows for efficient organization and tracking of different materials in the manufacturing process.F物料号码可以实现对制造过程中不同物料的高效组织和追踪。
2. Please provide the f_material_no for the components used in this assembly.请提供用于该装配的零部件的F物料号码。
3. The f_material_no helps streamline inventory management by enabling quick identification of materials.F物料号码有助于通过迅速识别物料来简化库存管理。
4. Each material is assigned a unique f_material_no to ensure accurate tracking throughout the supply chain.每种物料都分配了一个唯一的F物料号码，以确保在整个供应链中的准确追踪。
5. The f_material_no is crucial for efficient procurement planning and stock replenishment.F物料号码对于高效的采购计划和库存补充非常重要。
6. By using the f_material_no, it is easy to locate and retrieve specific materials from the warehouse.通过使用F物料号码，可以轻松从仓库中找到和取出特定的物料。
imds_recommendation_001_annex_I
Table of Contents1Material Classifications in IMDS (2)1.1Selection of Material Classifications in IMDS (2)1.2Special Materials (14)2Examples (15)2.1Specific Requirements for Automotive Lubricants –Material Classification 9.2 (15)2.2Additional information on the creation ofMDSs for Thermoplastics – Material Classifications 5.1.x (17)2.3Additional information on the creation ofMDSs for Thermoplastic Elastomers – Material Classification 5.2 (21)2.4Additional information on the creation of MDSs forElastomers/Elastomeric Compounds – Material Classification 5.3 (21)2.5MDS creation for Complex Products ofThermoplastics, TPEs and/or Elastomers (22)3Revisions (25)Annex I to the IMDS001 Recommendation IMDS 001a 1Material Classifications in IMDS1.1Selection of Material Classifications in IMDSThe classification system for materials in MDSs is a mixture of composition (substances in the material), production [class. 1 – 4, 7], properties [class. 5] and application [class. 6, 8, 9] of the material. Materials should preferably be classified according to their composition and not to their application. Materials in electronic applications should be classified according to their composition (e.g. copper instead of electronics). Plastic materials should be firstly classified according to their properties. The classification should be as detailed as possible. For example, if possible, avoid classification 1.1 but use 1.1.1 or 1.1.2 instead.In IMDS, it is expected that every homogeneous material has to be described as a separate material. “Homogeneous” means that there is a consistent material composition which cannot be separated mechanically into two or more different materials. “Mechanical separation” here means that it is generally possible to separate materials by means of cutting, trimming and abrasion. Homogeneous materials are for example plastics, metals, alloys and coatings.Materials such as metals with a coating (example: plated galvanized steel or copper wire with PVC coating) or layered composition materials (example: copper overmolded with polymer) are most likely not homogeneous and each layer needs to be described as a separate material with appropriate classification of each material, e.g. classification 3.3 for zinc coating.An elemental breakdown of the material is prohibited. Materials need to be reported as they appear on the vehicle. For example, if describing a polymer, you need to describe it in the cured state and not the processing chemicals. If you do include a gas, liquid, or processing chemical as a basic substance, you need to verify that they are still present in the final (hardened and dried up) part as supplied to the customer.Many of the metal materials have been published in IMDS by the IMDS Committee. Before creating your own material in these classifications, please check if there is an appropriate material already published by the IMDS Committee. Please do not use materials published by other suppliers unless they are your supplier. In cases where there is an IMDS Committee material and a supplier material published for the same material, the IMDS Committee material should preferably be used. To find IMDS Committee materials, use the search function for materials and check “published MDSs” for origin to find these materials.In the following sections, information on each classification and examples are included. Given thresholds reflect common concentrations which might deviate in special materials.Annex I to the IMDS001 Recommendation IMDS 001aAnnex I to the IMDS001 Recommendation IMDS 001aAnnex I to the IMDS001 Recommendation IMDS 001aAnnex I to the IMDS001 Recommendation IMDS 001aAnnex I to the IMDS001 Recommendation IMDS 001aAnnex I to the IMDS001 Recommendation IMDS 001aAnnex I to the IMDS001 Recommendation IMDS 001aAnnex I to the IMDS001 Recommendation IMDS 001aAnnex I to the IMDS001 Recommendation IMDS 001aAnnex I to the IMDS001 Recommendation IMDS 001aAnnex I to the IMDS001 Recommendation IMDS 001aAnnex I to the IMDS001 Recommendation IMDS 001a1.2Special MaterialsThis section lists some special categories of materials and how they should be handled. Magnetic materials:•In a metallic magnet, the alloying elements must be listed. In the case of a metallic magnet, none of the basic substances should contain oxygen (be a metal oxide). The material classification should be selected based on material composition. Metallicmagnets should be classified in one of the classifications in categories 1-4 that bestfits the composition. For permanent magnets/magnetically hard materials,classification 4.2 is usually used (e.g. rare earth based alloys such as Sm-Co 5) •If there is a ceramic magnet, the basic substances have to be given as metal oxides.The correct classification would then be 7.2 ceramics/glass.•Metal oxides could also be used within a plastic matrix. In this case the classification5.1a should be used for thermoplastic polymer matrix and 5.4.x for duromers.Annex I to the IMDS001 RecommendationIMDS 001a2 ExamplesThis section lists some examples.2.1 Specific Requirements for Automotive Lubricants – Material Classification9.2Definition:Automobile lubricants are products that are applied directly in the vehicle and remainthroughout the entire vehicle life cycle (life-span of the lubricant) or are replaced during the life cycle by fresh oils/greases. These are not process lubricants like such as hydraulic oils for operating presses; heat transfer oils for operating hot-oil facilities; cooling lubricants for operating tools; corrosion protection oils which are not to be reported. Structure:The MDS representing the lubricant must be created:• According to the final composition in the automobile (for example in the case oflubricant sprays, evaporated solvents are not to be included) • According to Recommendation IMDS 001 rules and guidelines• As material type MDS (not as components or semi-components), containing: basicsubstances, confidential substances and/or jokers / wildcards (highly confidential substances).o Primary constituent: present in the lubricant in high quantities; the primary constituents must be reported, irrelevant of their presence on the GADSL list (reportable substances).o Additives : present in the lubricant in smaller quantities; consist of at least one basic substance or a mix of primary constituents.o Confidential additives The following figure represents a typical MDS structure for a lubricant (Material Classification 9.2):: are high confidential substances, which are not on the GADSL-list and where disclosure is not demanded (See definition of Jokers/Wildcards in Rec001).Annex I to the IMDS001 Recommendation IMDS 001aPrimary Constituent – Oils:For creation of automotive lubricants, there are five (5) primary constituent available in the category of “Basic Oils”. These substances do not contain any substance that is declarable on the GADSL. If your oils contain substances on the GADSL-list, the GADSL-substances have to be reported separately.The following is a result of a substance search “basic oil” in the Name Field.Primary Constituent – Thickeners:For creation of automotive lubricants, there are ten (10) primary constituent available in the category of “Thickener”. These substances do not contain any substance that is declarable on the GADSL. If your thickeners contain substances on the GADSL-list, the GADSL-substances have to be reported separately.The following is a result of a substance search “thickener” in the Name Field.Range ValuesThe range values of the basic substances must meet the requirements of Recommendation 001.Change Management:Material data sheets released prior to a new version of Recommendation 001 that changed permitted range values are not required to be reworked to change the Range Values.Annex I to the IMDS001 Recommendation IMDS 001a 2.2Additional information on the creation of MDSs for Thermoplastics –Material Classifications 5.1.xA Thermoplastic polymer compound is a homogenous mixture of a basic polymer and functional additives (e.g. fillers, plasticizers, flame retardants etc.). When creating material MDSs for a thermoplastic (material classification 5.1.x), a wizard will guide you through the symbol creation process in order to achieve the correct symbol of the polymer material.After completing the wizard, you need to select the substances (e.g. basic polymers and functional additives) from the basic substance list.Should you have more than one filler, you can adjust the Composed Symbol with the necessary information on this screen or edit the symbol on the ingredients page. The percentage (%) of fillers in the pull down menu is represented in increments of 5%. If you are using a range for the filler content, select the percentage that falls within the range of substance. If you are using a fixed filler content that does not fit in the preselected 5% increments, you can edit this number either directly in the wizard or later on the ingredients page of the MDS. However, the 5% increment is generally seen as accurate enough for the symbol.In the basic substance list, you can find:‐Basic polymers according to ISO 1043-1 by searching for …basic polymer“ in the name field‐Impact-modified basic polymers according to ISO 1043-1 by searching for “basic polymer impact modified” in the name field‐Fillers according to ISO 1043-2 by searching for …ISO 1043-2“ in the name fieldAnnex I to the IMDS001 Recommendation IMDS 001a ‐Plasticizers according to ISO 1043-3 by searching for …ISO 1043-3“ in the name field ‐Flame retardants according to ISO 1043-4 by searching for …ISO 1043-4“ in the name fieldThese ISO 1043 type entries must not be used in place of declarable or prohibited substances (see GADSL [suppliers to Renault: BGO list]). Any GADSL/BGO list Declarable/Prohibited colorant, filler, plasticizer or flame retardant must be listed separately.In Thermoplastics, it is possible to have sub-materials. These sub-materials are usually masterbatches or concentrates (basic polymers with colorants/pigments, flame retardants, etc.). Sub-materials are normally used in materials in amounts of 1 to 5%. Consequently, the substances contained in these types of sub-materials are typically diluted in the top-level material to a level of 0.5 to 3%. If a thermoplastic material consists of sub-materials, any restrictions concerning the substance ranges and sum of wildcards and confidential substances do not apply to the sub-materials, but are calculated with regard to the topmost material level (cf. IMDS 001, Rule 5.1.A and fig. 7, p. 24).Example for selection from the Basic Substance List:Search for basic polymers ISO 1043-1: …basic polymer“Result: All basic polymers ISO 1043-1Annex I to the IMDS001 Recommendation IMDS 001a Search for basic polymers impact modified ISO 1043-1: …basicpolymer impact modified“Result: All basic polymers impact modified ISO 1043-1Search for fillers ISO 1043-2: …ISO 1043-2“Result: All fillers ISO 1043-2Annex I to the IMDS001 Recommendation IMDS 001a Search for plasticizers ISO 1043-3: …ISO 1043-3“Result: All plasticizers ISO 1043-3Search for flame retardants ISO 1043-4: …ISO 1043-4“Result: All flame retardants ISO 1043-4Examples for thermoplastic MDSs:Thermoplastics consisting of basic substances: Thermoplastics consisting of sub-materials:Annex I to the IMDS001 Recommendation IMDS 001a2.3 Additional information on the creation of MDSs for ThermoplasticElastomers – Material Classification 5.2A Thermoplastic Elastomer (TPE) compound is a homogenous mixture of a TPE material and functional additives. When creating an MDS of a TPE material (material classification 5.2), a wizard will guide you through the creation process in order to achieve a correct symbol for the TPE compound.After completing the wizard, you need to select the substances (like basic thermoplastic elastomers and functional additives) from the basic substance list.Basic thermoplastic elastomers are listed in the basic substance list under their ISO 18064 symbols. You can find them in the substance list by searching for “thermoplastic elastomer” in the name field. For complex composed TPE products, the working procedure is the same as for complex composed elastomers/elastomeric compounds (see 2.4).2.4 Additional information on the creation of MDSs forElastomers/Elastomeric Compounds – Material Classification 5.3 Elastomers/elastomeric compounds are a homogenous mixtures of a base rubber material and functional additives. When creating a material MDS for an elastomer/elastomeric compound (material classification 5.3), a wizard will guide you through the creation process in order to achieve a correct symbol for the elastomer/elastomeric compound.Annex I to the IMDS001 Recommendation IMDS 001aAfter completing the wizard, you need to select the substances (like basic rubbers and functional additives) from the basic substance list.Basic rubbers are listed under their ISO 1629 symbols. You can find them in the basic substance list by searching for “basic rubber” in the name field.2.5MDS creation for Complex Products of Thermoplastics, TPEs and/orElastomersComplex products composed of thermoplastics, thermoplastic elastomers and/orelastomers/elastomeric compounds (e.g. fuel hoses) are constructed as shown below for an example elastomer/elastomeric compound.For complex composed elastomers/elastomeric compounds that contain different rubber or plastic materials (e.g. a fuel hose with inner layer, intermediate layer, outer layer and a fiber reinforcement between the layers), it is recommended to add each contained material beneath a semi-component describing the composite product. The top level semi-component is not a homogenous material and should be described as shown below. The different components of the product can be described as materials.Annex I to the IMDS001 Recommendation IMDS 001a Examples for MDSs:Annex I to the IMDS001 Recommendation IMDS 001aAnnex I to the IMDS001 Recommendation IMDS 001a 3Revisions。