CCK-1212DF中文资料
Converge SR 1212A数字矩阵混音器与四通道电源放大器数据资料说明书
Converge TM|SR 1212ADigital Matrix Mixer with Four Channel Power AmplifierConverge Pro DATA SHeeT <THE ULTIMATE IN AUDIO PROCESSING AND DIGITAL MATRIX MIXING APPLICATIonSBoardroomsTraining CentersMunicipal RoomsCourtroomsHouses of WorshipTelemedicinePresentation SystemsZoned PagingMasking SystemsADvAnTAgeSAdvanced Feature SetManagement Improvements+Integrated Ethernet and USB connections>SNMP and HTML remote management agents>Event scheduler>Diagnostic console>Simplified Configuration Software+Drag & drop A/V and channel objects>Selectable views -- unit, matrix, channel>Expanded serial command set+Superior Audio PerformanceDARE™ (Dynamic Automatic Resonance Elimination) for control of feedback+Unique automatic mixing process delivers optimum intelligibility+20 Hz-22 kHz bandwidth for full-range audio response+ALC & AGC keep participants’ audio balanced and consistent+Advanced Digital Processing on each amplifier channel+Configuration FlexibilityFour built-in 35 Watt amplifiers, 8Ω or 70V/100V+Up to 96 microphones+Link multiple Converge/Converge Pro units (Converge Pro 880, 880T, 880TA, 840T, 8i, TH20,+Converge SR 1212 and SR 1212A) for extensive microphone coverage and up to 16 phonelinesEnhanced expansion bus, featuring 18 mix-minus audio buses for routing between units+Ten mic gating groups (four internal & six global) allow separation of mics into individual+mixer gating groups for greater configuration flexibility32 presets can be executed on-the-fly without disturbing other ongoing preset operations+255 Macros for customized audio control/configuration with single command execution+No space required between rack mounted units+NEw!Audio PerformanceConditions: Unless otherwise specified,all measurements are performedfrom 20 Hz to 22 kHz Bw limit (no weighting)Frequency Response: 20 Hz to 22 kHz+/- 1 dBNoise (EIN): -126 dBu, 20 kHz Bw,max gainRs= 150ΩTHD+ Noise: <0.02%Dynamic Range: >105 dB (non A weighted)Crosstalk: <-91 dB re 20 dBu full band. Mic/Line Inputs 1-8Push-on mini-terminal block, balanced, bridgingImpedance: > 5 KΩNominal Level: adjustable -56 dBu to 0 dBu (7dB step coarse gain adjustment) Maximum Level: -65 to +20 dBu Phantom Power: 24V, selectableLine Inputs 9-12Push-on mini-terminal block, balanced, bridgingImpedance: > 5 KΩNominal Level: 0 dBuMaximum Level: 20 dBuoutput 1-8Push-on mini-terminal block, balanced, bridgingImpedance: < 50ΩNominal Level: 0 dBuMaximum Level: 20 dBuAuto Mixer ParametersNumber of Open Microphones (NOM)PA Adaptive ModeFirst Mic Priority ModeMaximum # of MicsAmbient LevelGate Threshold AdjustOff Attenuation AdjustHold TimeDecay RateChairman Override96 T otal Microphones per site6- Global Gating Groups4- Internal Gating Groups Matrix Mixing Parameters8- Microphone Analog Inputs4- Analog Line Inputs8- Analog Line Outputs4- Power Amplifier Outputs18- Expansion Bus in/out8- Assignable Processing Blocks in/outAssignable Processing BlocksFiltersAll PassLow PassHigh PassLow shelvingHigh shelvingPEQNotchCrossoversCD HornCompressorDelay: adjustable up to 250 msPower Amplifier output ProcessingFeedBack Elimination w/ring cancellation10-band EQ filter4-node filter bank for CrossoverDelay BlockCompressor/LimiterNoise Gate for Hiss ControlSound Masking Generator per channelAdaptive Volume ControlMulti Channel ControlMicrophone Processing4-node filter bankAGC/ALCPower AmplifiersChannels: 4Amplifier Output: 4x35 Watts into 8ΩImpedance: Selectable 8Ω, 70V, 100VTHD + Noise: <0.2% (1/3 Power)Crosstalk: <-68 dBexpansion BusConnection: CAT 5, RJ45Mix Minus Structure18 Audio Buses6 Gating Buses8 Reference Busesnetwork10/100 Auto Switching (PC andNetwork Port)HTTP ServerT elnet ClientSNMP AgentSMTP ClientDNSDHCPrS-232DB-99.6k – 115k baud8/1/0Hardware Flow ControlUSBVersion 2.0 compatibleT ype: B-connectorgPIoDB 25 female (A/B)Inputs: Active LowOutputs: Open Collector, 40Vdc, 40 mAPower100-240VAC; 50/60 Hz,300 watts (maximum)Idle: 139 BTU/hrFull Load: 779 BTU/hrEfficiency: >80%Humidity15 to 80%MechanicalDimensions: 2RU3.5” H x 17.25” w x 15.92” Dweight: < 30 lbs.environmentalOperating temperature:32-122 degrees FComplianceFCCIndustry CanadaCERoHSClass 2 wiring RequiredPart number910-151-901 Converge SR 1212ACONVERGE PRO SR 1212A DATA SHeeT <> Converge Pro Sr 1212A BACK PAneL > SPeCIFICATIonS> CLeArone LoCATIonSHeadquarters:Salt Lake City, UT USA 5225 wiley Post way Suite 500Salt Lake City, UT 84116 Tel: 801-975-7200T oll Free: 800-945-7730 Fax: 801-977-0087******************Latin AmericaTel: 801-974-3621*******************EMEATel: 44 (0) 1189 036 053*******************APACTel: 801-303-3388*******************Other product names may be registered trademarks of their respective owners who do not necessarily endorse ClearOne or ClearOne’s products. All rights reserved. Information in this document subject to change without notice.© ClearOne. 802-151-901-DS Revision 1.9。
东风12型电力机车
东风12型(DF12)内燃机车一、简介资阳厂研制的东风12型重型调车机车，装车功率为2430kW(3300马力)，重138-150t，最大速度lOOkm/h，适用于路内大型编组站和工矿企业5000t级货列的调车和小运转作业，亦可担当一般干线的货运任务，是一种多用途机车。
机车是典型的调车机车结构，采用外走廊式车体，四周设走台栏杆，四角设扶手踏梯，机器室设侧门，方便检修。
机车下部是两台三轴转向架，转向架之间吊挂着燃油箱、蓄电池和总风缸。
东风12型内燃机车于1999年5月17日通过部级技术鉴定。
二、设计特点东风12型机车总体设计有以下特点:(1)东风12型机车可通过半径100m的曲线(通过速度小于5km/h)，并能在半径250m曲线上与货车正常摘挂，轴重亦可根据用户要求采用23t或25t，可适应各类编组站和不同工矿企业的线路条件。
(2)根据调车机车频繁调速、换向和经常在部分负荷下工作的特点，东风12型机车柴油机采用无级调速，电控采用先进的微机控制装置。
为确保机车运用的可靠性，该机车在采用微机控制的同时，仍保留原东风4B型机车的恒功励磁调节系统，必要时可切换使用。
(3)调车机车负荷率较低，东风12型机车又采用了干线机车的机组，因此柴油机的可靠性有保证。
为了减少电器故障率，东风12型机车上的主控制器、中间继电器、风泵接触器和琴键开关等换用沙尔特堡产品，使机车可靠性有了提高。
(4)为了改善曲线通过性能，东风12型机车转向架采取了以下措施:采用磨耗型踏面，加装轮轨涂油器，降低一系悬挂横向刚度，改用橡胶堆滚动摩擦旁承等。
为减少闸瓦消耗和提高制动性能，该机车装用合成闸瓦。
(5)该机车设计时注意改善司机工作条件。
因此，无论在司机室的宽敞明亮和双向操纵撩望条件方面，还是在空气调节、防操隔热、座椅的舒适度方面，以及机组的检修条件方面，都较以往的调车机车有所改善。
测试表明，司机噪声符合国家标准GB3450-94《铁路机车司机室噪声允许值》的要求。
DF12型机车恒低速PLC控制系统
DF12型机车恒低速P LC控制系统DF12Constant Low Speed P LC Control Syste m for Loco motive s王 军(四川资阳中国南车集团,资阳 641301)摘 要 简要介绍了DF12型机车恒低速P LC控制系统的研究情况、系统构成与功能及工作原理等。
装有该系统的机车在神华西部铁路有限公司装煤站的实际使用表明,该系统稳定可靠,使用效果良好。
关键词 机车 恒低速控制 P LC DF12型Abstract The system com position,functions,and operational principle as well as the research status of the P LC control system for DF12locom otives run2 ning at constant low speed are introduced.The practical application of the locom otives equipped this system in coal loading station of Shenhua W estern Railway C o.,Ltd.is als o presented.K eyw ords Locom otive C onstant low speed control P LC DF120 引言DF12型机车恒低速控制系统是根据用户(神华西部铁路有限公司)的特殊要求而设计的。
要求该机车可在给定的018～3km/h低速度范围内恒速运行。
为此我们在DF12型机车的基础上增设了恒低速控制功能。
1 DF12型机车恒低速P LC控制系统该系统是在我厂已开发的内燃机车P LC控制系统CFW J-1的基础上研制开发的以SIM ATIC S7-200/ CPU226型P LC为核心的多功能实时控制系统。
BF1212中文资料
2003 Nov 14
4
元器件交易网
Philips Semiconductors
Product specification
N-channel dual-gate MOS-FETs
BF1212; BF1212R; BF1212WR
DYNAMIC CHARACTERISTICS Common source; Tamb = 25 °C; VG2-S = 4 V; VDS = 5 V; ID = 12 mA; unless otherwise specified. SYMBOL yfs Cig1-ss Cig2-ss Coss Crss F PARAMETER forward transfer admittance input capacitance at gate 1 input capacitance at gate 2 output capacitance noise figure f = 1 MHz f = 1 MHz f = 1 MHz f = 11 MHz; GS = 20 mS; BS = 0 f = 400 MHz; YS = YS (opt) f = 800 MHz; YS = YS (opt) Gtr power gain f = 200 MHz; GS = 2 mS; BS = BS (opt); GL = 0.5 mS; BL = BL (opt) f = 400 MHz; GS = 2 mS; BS = BS (opt); GL = 1 mS; BL = BL (opt) f = 800 MHz; GS = 3.3 mS; BS = BS (opt); GL = 1 mS; BL = BL (opt) Xmod cross-modulation input level for k = 1%; fw = 50 MHz; funw = 60 MHz; note 1 at 0 dB AGC at 10 dB AGC at 40 dB AGC Note 1. Measured in test circuit Fig.21. 90 − 100 − 89 104 − − − dBµV dBµV dBµV CONDITIONS pulsed; Tj = 25 °C MIN. 28 − − − − − − − − − − TYP. 33 1.7 1.1 0.9 15 4 0.9 1.1 35 30 25 MAX. 43 2.2 − − 30 − 1.6 1.8 − − − UNIT mS pF pF pF fF dB dB dB dB dB dB
解放车型代码讲解
P1－FM普通内饰平顶 P2－FP平顶/高顶 P4－FM全新内饰平顶/高顶 P9－J5K平顶
P66－J6平顶/高顶 此位无字母表示长头驾驶室，包括长头老脸、改脸和J5R
产品型号－车辆特征代码
C A 1 3 1 3 P7
驾 驶 室
K2
发 动 机
L11
轴 距
T4
驱 动 型 式
A
特 征 代 号
解放发动机类型：
油，S表示非汽油、非柴油的单一代用燃料；
产品系列代号－用大写英文字母表示，其中D、G、I、O不用 重大技术改进变更代号－用阿拉伯数字1－9表示。
发动机型号－后部/尾部
首部 中部 后部 尾部
C
A
6
D
L
2
—
3
5
E3
后部
用“－”与中部分开。用两位数字表示发动机功率，功率的
单位为马力；
用字母表示产品特征：E3－欧Ⅲ排放 ，N－天然气发动机。
130Ps…200Ps…400Ps间的功率）。若功率大于 400Ps以上，第一
位代码用“2”表示，第二位代码（即功率段）要重新从“1”开始 排 序 ，如 ：代 码 “ 21 、 22 、 23…2A…2X” 表 示 大柴及 功率 （ 即
410Ps、420Ps、430Ps…500Ps…700Ps间的功率）。
产品型号－车辆特征代码
C A 1 3 1 3 P7
驾 驶 室
K2
发 动 机
L11
轴 距
T4
驱 动 型 式
A
特 征 代 号
特征代号汇总：
A－区别号：A8*－青汽 A7*－专用车 A9*－柳特 B－自卸车底盘 G－高原车 R－长头卧铺 W－林业车底盘 CLXY－仓栅式运输车 E－高栏车 H－动力型 S－搅拌底盘 Y－右置方向盘 XXY－厢式运输车 F－后轮单胎 J－军车 U－客货两用车 X－篷式运输车
柯蒂斯电控资料
科蒂斯CURTIS系列电动汽车电机控制系统系列产品技术资料由于是进口产品！中文资料较少！这是我花费了不少时间搜集整理出来的！型号：1204/1205：串励电机速度控制器类型：电压：24-48V；电流：175-400A适用范围：科蒂斯1204/1205/1209型串励电机速度控制器是多种工业电动车辆的理想选择。
广泛应用于电动搬运车、电动装载车、物料搬运车、高尔夫球车以及其他小型串励机设备应用场合。
型号：1207A：串励电机速度控制器（CURTIS/PMC1270A）类型：额定电流:250A/300A；额定电压:24V。
可编程适用范围：可编程科蒂斯1207A型串励电机速度控制器是小型电动车辆的理想选择。
广泛应用于电动托盘车、堆垛车、电动搬运车、清扫车以及其他小型串励和复励电机设备应用场合。
型号：科蒂斯1209B：串励电机速度控制器类型：电压：36-48V/48-72V电流：400-450A适用范围：是多种工业电动车辆的理想选择。
广泛应用于电动搬运车、电动装载车、物料搬运车、高尔夫球车以及其他小型串励电机设备应用场合。
类型：科蒂斯1210：永磁电机速度控制器：类型：符合欧洲及美国标准，可编程。
电压：24V；电流：45A/70A适用范围：科蒂斯1210型永磁电机速度控制器适用于3-4轮的电动休闲车及代步车及清扫车等小型工业车辆。
型号：科蒂斯1214/1215/1219类型：可编程额定电压:48V额定电流:250A/300A/400A/500A/600A；适用范围：是电动车辆的理想选择。
广泛应用于电动托盘车、堆垛车、电动搬运车、清扫车以及其他小型串励和复励电机设备应用场合。
串励电机速度控制器。
型号：科蒂斯1221B串励电机速度控制器类型：24-36 V, 600 A；36-48 V, 550 A；48-72 V, 500 A适用范围：是多种工业电动车辆的理想选择。
广泛应用于电动搬运车、电动装载车、物料搬运车、高尔夫球车以及其他小型串励电机设备应用场合。
cc1120中文资料
Digital Input/Output
General purpose IO
Power
3 V VDD to internal digital regulator
Power
Digital regulator output to external C
Digital Input
Serial data in
• 增强型无线电唤醒功能，用于自动低功耗接收轮询 • 独立 128 字节 RX 和 TX FIFO • 包括天线多样性功能 • 支持再传输 • 支持自动应答接收包 • TCXO 支持和控制，在功率模式也是如此 • 说前先听 (LBT) 系统的自动广播声道评估 (CCA) • 内置编码增益支持扩展范围和耐用性 • 数字 RSSI 测量 • 支持与 CC1190 无缝集成以实现范围扩展，使敏感
• 适合面向ETSI 1 类符合169 MHz 和 433 MHz 频带 的系统
• 高频谱效率 (12.5 kHz时 9.6 kbps 通道与窄带命令 兼容
• 电源 – 宽电源电压范围 (2 V – 3.6 V) – 低电流消耗： – RX: 3.7 mA 在 RX 嗅探模式 – RX: 17 mA 峰值电流在低功率模式 – RX: 22 mA 峰值电流在高性能模式 – TX：45 mA +14 dBm – 断电：< 0.3 µA – 步长为 0.4 dB、最高 16 dBm 的可编程输出功 率 – 自动输出功率递增 – 可配置数据速率：0 至 200 kbps – 支持的调制格式：2-FSK, 2- GFSK, 4-FSK, 4-GFSK, MSK, OOK – 高级数字信号处理以提升同步检测性能 – 符合 RoHS 的 5 x 5 mm QFN 32 封装
RJZ-1212DHP中文资料
Deviation / Load
30.000 25.000
Deviation / Load
Deviation from Nominal (%)
Deviation from Nominal (%)
20.000 15.000 10.000 5.000 0.000 -5.000
0% 20% 40% 60% Total Output current (%)
80%
100%
0% 20% 40% 60% Total Output current (%)
80%
0% 20% 40% 60% Total Output current (%)
80%
100%
Deviation / Load
RGZ-xx05D
Efficiency / Load
100 80 60 40
1205 2405 0505
RGZ-xx09D
Efficiency / Load
100 80 60 40
1209 2409 0509
Efficiency %
Efficiency %
20 0
2415
20 0
Efficiency %
1205
20.000 15.000 10.000 5.000 0.000 -5.000
Deviation from Nominal (%)
2405
2409 0509
20.000 15.000 10.000 5.000 0.000 -5.000
1212 0512
0505
0% 20% 40% 60% Total Output current (%) 80% 100%
无锡柴油机厂-CA4DF2系列柴油机零件图册说明书
CA4DF2系列图柴油机零件册PARTS CATALOGUE FOR CA4DF2 DIESEL ENGINES月版2013年6月版一汽解放汽车有限公司无锡柴油机厂FAW JIEFANG AUTOMOTIVE COMPANY, LTD.WUXI DIESEL ENGINE WORKS一汽解放汽车有限公司无锡柴油机厂FAW JIEFANG AUTOMOTIVE COMPANY,LTD.WUXI DIESEL ENGING WORKS地址：江苏省无锡市塘南一支路9号STAdd: 9,1 Tangnan Branch Road, Wuxi,jiangsu,P.R.China邮政编码: 214026 电话号码**************传真号码:85016785 Postcode: 214026 Tel**************Fax: 85016785 生产许可证编号：XK-06-205-00140XK-06-205-00244编 写 张晓益 刘亲祥 赵 乐Editor: Zhang Xiaoyi Liu Qinxiang Zhao Le审 核 杜 健 祁 奇 张永宝Examination: Du Jian Qi Qi Zhang Yongbao审 定 宣晓明 李新平Inspector: Xuan Xiaoming Li Xingping前 言敬爱的用户，一汽解放汽车有限公司无锡柴油机厂衷心感谢您选择我们的产品。
本手册是指导您采购原厂备件时使用，在您使用本图册时，请注意以下事项：1．为了使您采购柴油机备件不致有误，采购时请正确填写下列表格内容：一汽锡柴备件采购清单您的称呼： 您的地址： 您的电话：您的邮箱：机型： 编号：订货号： 序号零件件号零件名称采购数量备注1 2 3 …2．随着产品的不断改进，实际产品的部分零部件与本图册所表达的结构形状、件号可能会有出入，若有出入，在您采购时我厂或当地备件代理商将反馈给您。
CCN-1212DF中文资料
DC to DC ConvertersInsulation Type, 1.5 to 10W Output,5-year Warranty Period, UL/C-UL Certified(except CCP Type) CC SeriesFEATURES•5-year warranty period.•With input protection element.•With output variable terminal (except CCP24).•Input-output floating.•Shield type of 5-sided metal case.•External component not required.•With overcurrent protection function.•With input remote control (CCN type).•Long life without electrolytic capacitor.•Input voltage alarm function incorporated (CCP-24 type).•It is a product conforming to RoHS directive.PART NUMBERS AND RATINGSCCK TYPECCM TYPECCN TYPECCP TYPE∗1The same product can be used for the 12V output and the 15V output by using the Vset terminal.∗2The same product can be used for the ±12V output and the ±15V output by using the Vset terminal.∗3The 24V output is used as a single output with the COM. terminal of the ±12V output product open.Conformity to RoHS DirectiveOutput current InputvoltageOutput voltage3.3V5V12V∗115V∗1±12V∗2±15V∗224V∗31.5W 12V CCK-1203SF CCK-1205SF CCK-1212SF CCK-1212SF CCK-1212DF CCK-1212DF CCK-1212DF 24V CCK-2403SF CCK-2405SF CCK-2412SF CCK-2412SF CCK-2412DF CCK-2412DF CCK-2412DFOutput current InputvoltageOutput voltage112233W 5V CCM-0503SF CCM-0505SF CCM-0512SF CCM-0512SF CCM-0512DF CCM-0512DF CCM-0512DF 12V CCM-1203SF CCM-1205SF CCM-1212SF CCM-1212SF CCM-1212DF CCM-1212DF CCM-1212DF 48V CCM-4803SF CCM-4805SF CCM-4812SF CCM-4812SF CCM-4812DF CCM-4812DF CCM-4812DFOutput current Inputvoltage 3.3V5V12V15V±12V±15V24V6W 5V CCN-0503SF CCN-0505SF CCN-0512SF CCN-0512SF CCN-0512DF CCN-0512DF CCN-0512DF 24V CCN-2403SF CCN-2405SF CCN-2412SF CCN-2412SF CCN-2412DF CCN-2412DF CCN-2412DF 48V CCN-4803SF CCN-4805SF CCN-4812SF CCN-4812SF CCN-4812DF CCN-4812DF CCN-4812DFOutput current InputvoltageOutput voltage3.3V5V12V•Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.SPECIFICATIONS AND STANDARDS∗1 Typical input voltage, maximum output current∗2 Vset and –Vout are shorted.∗3 Load variation condition of 2-output product: Balance load∗4 Measurement bandwidth: 50MHz• The 2-output product can be used as a single output of 24V to 30V with the COM. terminal open.• Refer to the description of the application for information about the voltage adjustment method or the like.OUTPUT POWER - AMBIENT TEMPERATURE(DERATING)•If the operating temperature range is determined based on the case surface temperature, it should be 90°C or lower independently of a load rate.PRECAUTIONS•Parallel operation to increase output current is not possible.•Since the converter is entirely shielded by a metal case, care should be taken to isolate the case from the surrounding compo-nents and wiring pattern.Part K-0503SF CCK-0505SF CCK-0512SF CCK-0512DF CCK-1203SF CCK-1205SF CCK-1212SF CCK-1212DFMaximum output power W 1.3 1.5 1.5 1.51.3 1.5 1.5 1.5Input conditionsInput voltage Edc V 4.5 to 9(5typ.)9 to 18(12typ.)Efficiency∗1%66typ.68typ.70typ.68typ.70typ.73typ.75typ.73typ. Output voltage Edc V 3.3512±12 3.3512±12 Output voltage 2∗2 Edc V 3.67615±15 3.67615±15 Voltage variable range Edc V 2.84 to 3.67 4.3 to 612 to 1512 to 15 2.84 to 3.67 4.3 to 612 to 1512 to 15 Maximum output current mA4003001256040030012560 Maximum output current 2∗2mA3502501005035025010050 Output voltage total variation%±5max.±5max.±5max.±5max.±5max.±5max.±5max.±5max.Voltage stability Input variation mV2020304020203040 Load variation∗3mV40401006004040100600 Temperature variation mV50501001505050100150Ripple noise Ep-p∗4mV40typ.40typ.30typ.30typ.40typ.40typ.30typ.30typ. mV120max.120max.120max.120max.120max.120max.120max.120max.Part K-2403SF CCK-2405SF CCK-2412SF CCK-2412DF CCK-4803SF CCK-4805SF CCK-4812SF CCK-4812DF Maximum output power W 1.3 1.5 1.5 1.5 1.3 1.5 1.5 1.5Input conditionsInput voltage Edc V18 to 36(24typ.)36 to 72(48typ.)Efficiency∗1%70typ.75typ.75typ.75typ.70typ.75typ.75typ.75typ. Output characteristicsOutput voltage Edc V 3.3512±12 3.3512±12 Output voltage 2∗2 Edc V 3.67615±15 3.67615±15 Voltage variable range Edc V 2.84 to 3.67 4.3 to 612 to 1512 to 15 2.84 to 3.67 4.3 to 612 to 1512 to 15 Maximum output current mA4003001256040030012560 Maximum output current 2∗2mA3502501005035025010050Output voltage total variation%±5max.±5max.±5max.±5max.±5max.±5max.±5max.±5max.Voltage stability Input variation mV2020304020203040 Load variation∗3mV40401006004040100600 Temperature variation mV50501001505050100150Ripple noise Ep-p∗4mV40typ.40typ.30typ.30typ.40typ.40typ.30typ.30typ. mV120max.120max.120max.120max.120max.120max.120max.120max.SHAPES AND DIMENSIONSWeight: 6gDimensions in mm Tolerance: ±0.3RECOMMENDED PWB HOLE SIZE, LOCATION[TOP VIEW]CIRCUIT DIAGRAMS SINGLE OUTPUT TYPECCK-SF SERIES2-OUTPUT TYPECCK-DF SERIESOscillating method: Astable frequency methodOscillating frequency: Approx. 200kHz[100% load] to approx. 1200kHz[no load]MTTF: 500Fit[2000000h, 100% load]COMMON SPECIFICATIONSTERMINAL PIN CONFIGUTATION No.1+Vin No.3NC No.4–Vout TERMINAL PIN CONFIGUTATION No.1+Vin No.3–VoutNo.4Common out Overcurrent protection Yes Temperature range Operating(°C)–20 to +70[Derating is necessary when operating environment temperature exceed 50°C.]Storage(°C)–40 to +85Humidity range Amplitude 10 to 55Hz, all amplitude 1.52mm, sweep time 15min.[3 directions of X, Y, Z, each 2h]Insulation resistance Input to output, input to case, output to case: 50M Ω min.[DC.500V]Safety standards UL60950, CSA60950(C-UL) certified ××××Weight6gSPECIFICATIONS AND STANDARDS∗1 Typical input voltage, maximum output current ∗2 Vset and –Vout are shorted.∗3 Load variation condition of 2-output product: Balance load ∗4 Measurement bandwidth: 50MHz• The 2-output product can be used as a single output of 24V to 30V with the COM. terminal open.• Refer to the description of the application for information about the voltage adjustment method or the like.OUTPUT POWER - AMBIENT TEMPERATURE(DERATING)•If the operating temperature range is determined based on the case surface temperature, it should be 90°C or lower independently of a load rate.PRECAUTIONS•Parallel operation to increase output current is not possible.•Since the converter is entirely shielded by a metal case, care should be taken to isolate the case from the surrounding compo-nents and wiring pattern.Part No.CCM-0503SF CCM-0505SF CCM-0512SF CCM-0512DF CCM-1203SF CCM-1205SF CCM-1212SF CCM-1212DF Maximumoutputpower W 23332333Input conditions Input voltage Edc V 4.5 to 9(5typ.)9 to 18(12typ.)Efficiency ∗1%65typ.70typ.72typ.72typ.70typ.75typ.77typ.77typ.Output voltage Edc V 3.3512±12 3.3512±12Output voltage 2∗2 Edc V 3.67615±15 3.67615±15Voltage variable range Edc V 2.84 to 3.67 4.3 to 612 to 1512 to 15 2.84 to 3.67 4.3 to 612 to 1512 to 15Maximum output current mA 600600250125600600250125Maximum output current 2∗2mA 540500200100540500200100Output voltage total variation%±5max.±5max.±5max.±5max.±5max.±5max.±5max.±5max.VoltagestabilityInput variationmV 2020304020203040Load variation ∗3mV 40401006004040100600Temperature variation mV 50501001505050100150Ripple noise Ep-p ∗4mV 40typ.40typ.30typ.30typ.40typ.40typ.30typ.30typ.mV120max.120max.120max.120max.120max.120max.120max.120max.Part No.CCM-2403SF CCM-2405SF CCM-2412SF CCM-2412DF CCM-4803SF CCM-4805SF CCM-4812SF CCM-4812DF Maximum output power W 23332333Input conditions Input voltage Edc V 18 to 36(24typ.)36 to 72(48typ.)Efficiency ∗1%70typ.75typ.78typ.78typ.70typ.75typ.78typ.78typ.Output characteristics Output voltage Edc V 3.3512±12 3.3512±12Output voltage 2∗2 Edc V 3.67615±15 3.67615±15Voltage variable range Edc V 2.84 to 3.67 4.3 to 612 to 1512 to 15 2.84 to 3.67 4.3 to 612 to 1512 to 15Maximum output current mA 600600250125600600250125Maximum output current 2∗2mA 540500200100540500200100Output voltage total variation%±5max.±5max.±5max.±5max.±5max.±5max.±5max.±5max.VoltagestabilityInput variation mV 2020304020203040Load variation ∗3mV 40401006004040100600Temperature variationmV 50501001505050100150Ripple noise Ep-p ∗4mV 40typ.40typ.30typ.30typ.40typ.40typ.30typ.30typ.mV 120max.120max.120max.120max.120max.120max.120max.120max.SHAPES AND DIMENSIONSWeight:10gDimensions in mm Tolerance: ±0.3RECOMMENDED PWB HOLE SIZE, LOCATION[TOP VIEW]CIRCUIT DIAGRAMS SINGLE OUTPUT TYPECCM-SF SERIES2-OUTPUT TYPECCM-DF SERIESOscillating method: Astable frequency methodOscillating frequency: Approx. 200kHz[100% load] to approx. 1200kHz[no load]MTTF: 500Fit[2000000h, 100% load]COMMON SPECIFICATIONSTERMINAL PIN CONFIGUTATION No.1+Vin No.2–Vin No.3NC No.5Vset No.6+VoutTERMINAL PIN CONFIGUTATION No.1+Vin No.2–Vin No.3–VoutNo.5Vset No.6+VoutOscillating method Astable frequency methodMTTF500Fit[2000000h, 100% load]Overcurrent protection Yes Temperature range Storage(°C)–40 to +85Humidity range Amplitude 10 to 55Hz, all amplitude 1.52mm, sweep time 15min.[3 directions of X, Y, Z, each 2h]Vibration980m/s 2(100G) 6ms[6 directions, each 3 times]Insulation resistance Input to output, input to case, output to case: 50M Ω min.[DC.500V]Safety standards UL60950, CSA60950(C-UL) certified ××××SPECIFICATIONS AND STANDARDS∗1 Typical input voltage, maximum output current ∗2 Vset and –Vout are shorted.∗3 Load variation condition of 2-output product: Balance load ∗4 Measurement bandwidth: 50MHz• The 2-output product can be used as a single output of 24V to 30V with the COM. terminal open.• Refer to the description of the application for information about the voltage adjustment method or the like.OUTPUT POWER - AMBIENT TEMPERATURE(DERATING)•If the operating temperature range is determined based on the casesurface temperature, it should be 90°C or lower independently of a load rate.PRECAUTIONS•Parallel operation to increase output current is not possible.•Since the converter is entirely shielded by a metal case, care should be taken to isolate the case from the surrounding compo-nents and wiring pattern.Part No.CCN-0503SF CCN-0505SF CCN-0512SF CCN-0512DF CCN-1203SF CCN-1205SF CCN-1212SF CCN-1212DF Maximumoutputpower W 45665666Input conditions Input voltage Edc V 4.5 to 9(5typ.)9 to 18(12typ.)Efficiency ∗1%70typ.74typ.78typ.76typ.73typ.80typ.85typ.85typ.Output voltage Edc V 3.3512±12 3.3512±12Output voltage 2∗2 Edc V 3.67615±15 3.67615±15Voltage variable range Edc V 2.84 to 3.67 4.3 to 612 to 1512 to 15 2.84 to 3.67 4.3 to 612 to 1512 to 15Maximum output current mA 1200100050025015001200500250Maximum output current 2∗2mA 100080040020013001000400200Output voltage total variation%±5max.±5max.±5max.±5max.±5max.±5max.±5max.±5max.VoltagestabilityInput variationmV 2020304020203040Load variation ∗3mV 40401006004040100600Temperature variation mV 50501001505050100150Ripple noise Ep-p ∗4mV 60typ.40typ.30typ.30typ.60typ.40typ.30typ.30typ.mV120max.120max.120max.120max.120max.120max.120max.120max.Part No.CCN-2403SF CCN-2405SF CCN-2412SF CCN-2412DF CCN-4803SF CCN-4805SF CCN-4812SF CCN-4812DF Maximum output power W 56665666Input conditions Input voltage Edc V 18 to 36(24typ.)36 to 72(48typ.)Efficiency ∗1%77typ.82typ.85typ.85typ.77typ.80typ.85typ.85typ.Output characteristics Output voltage Edc V 3.3512±12 3.3512±12Output voltage 2∗2 Edc V 3.67615±15 3.67615±15Voltage variable range Edc V 2.84 to 3.67 4.3 to 612 to 1512 to 15 2.84 to 3.67 4.3 to 612 to 1512 to 15Maximum output current mA 1500120050025015001200500250Maximum output current 2∗2mA 1300100040020013001000400200Output voltage total variation%±5max.±5max.±5max.±5max.±5max.±5max.±5max.±5max.VoltagestabilityInput variation mV 2020304020203040Load variation ∗3mV 40401006004040100600Temperature variationmV 50501001505050100150Ripple noise Ep-p ∗4mV 60typ.40typ.30typ.30typ.60typ.40typ.30typ.30typ.mV 120max.120max.120max.120max.120max.120max.120max.120max.SHAPES AND DIMENSIONSWeight:17gDimensions in mm Tolerance :±0.3RECOMMENDED PWB HOLE SIZE, LOCATION[TOP VIEW]CIRCUIT DIAGRAMS SINGLE OUTPUT TYPECCN-SF SERIES2-OUTPUT TYPECCN-DF SERIESOscillating method: Astable frequency methodOscillating frequency: Approx. 150kHz[100% load] to approx. 1000kHz[no load]MTTF: 650Fit[1500000h, 100% load]COMMON SPECIFICATIONSTERMINAL PIN CONFIGUTATION No.2Vctl No.3–Vin No.6Vset TERMINAL PIN CONFIGUTATION No.2Vctl No.3–Vin No.6Vset Overcurrent protection Yes Remote ON-OFF YesTemperature range Storage(°C)–40 to +85Humidity range Operating(%)RH 20 to 95[Maximum wet-bulb temperature: 38°C, without dewing]Vibration980m/s 2(100G) 6ms[6 directions, each 3 times]ΩSafety standards UL60950, CSA60950(C-UL) certified External dimensions 41×8.5×25.8mm[W ×H ×D]SPECIFICATIONS AND STANDARDS∗1 Output voltage includes input variation, load variation, and temperature variation.∗2 Measurement bandwidth: 50MHz∗3 Typical input voltage, maximum output current∗4 Overcurrent protection function is automatic reset type.OUTPUT POWER - AMBIENT TEMPERATURE(DERATING)•If the case temperature is used for the derating, apply the range indicatedby the dashed line.CONNECTIONSThe input voltage detection output terminal (±Alarm) is a transistor output of a photo-coupler and it is insulated at the both input and output sides.PRECAUTIONS•Parallel operation to increase output current is not possible.•Since the converter is entirely shielded by a metal case, care should be taken to isolate the case from the surrounding compo-nents and wiring pattern.LOW INPUT VOLTAGE DETECTION CIRCUITThe following circuit configuration is recommended for the low input voltage detection circuit.In a rise of the power supply, the +Alarm terminal is at the low level when the input voltage is in a range of 18 to 19V.In a fall of the power supply, the +Alarm terminal is at the high level when the input voltage is in a range of 17 to 18V.Part No.CCP-2403SF CCP-2405SF CCP-2412SF Maximum output power W 7.591010.2Input conditions Input voltage Edc V 18 to 36(24typ.)18 to 36(24typ.)18 to 36(24typ.)Efficiency%80typ.83typ.85typ.Output voltage EdcV 3.3512Maximum output currentmA 23002000850Output voltage total variation ∗1%±5max.±5max.±5max.VoltagestabilityInput variationmV 202030Load variationmV 4050100Temperature variationmV 50100150Ripple noise Ep-p ∗3mV 60typ.80typ.100typ.mV 120max.120max.150max.SHAPES AND DIMENSIONSOscillating frequency: Approx. 280kHz[Fixed]MTTF: 650Fit[1500000h, 100% load]RECOMMENDED PWB HOLE SIZE, LOCATION[TOP VIEW]TERMINAL PIN CONFIGUTATIONCOMMON SPECIFICATIONSTerminal No.Function Remark3+Alarm Phototransistor Collector terminal 4–Alarm Phototransistor Emitter terminal7, 8+VoutOvercurrent protection Yes Remote ON-OFF YesTemperature range Storage(°C)–40 to +85Humidity range Operating(%)RH 95 max.[Maximum wet-bulb temperature: 38°C, without dewing]Vibration980m/s 2(100G) 6ms[6 directions, each 3 times]ΩExternal dimensions 45.5×8.5×35.0mm[W ×H ×D]Weight30gCharacteristics, Functions, and ApplicationsTERMINAL CONNECTIONBe very careful with coupling input wires. An incorrect terminal connection or polarity may damage a converter.•OUTPUT VOLTAGE ADJUSTMENT TERMINAL (Vset) (except CCP Type)The following output voltages can be outputted by connecting this terminal to an output + or – terminal. Unless the output voltage is adjusted, this terminal should be open.In addition, the voltages can be adjusted not by shorting these ter-minals, but by connecting them to resistances as shown below.•Calculation formulaConnection resistance: R(kΩ)∗1 Vo=(3.3×R+36.7)/(R+10)∗2 Vo= 2.5×[2+2.7/(R+6.8)]∗3 Vo=2.5+9.5 (R+10.9)/(R+8.2)∗4 Vo=2.5+22×(R+12.7)/(R+10)[Between two outputs]∗5 Vo=(3.3×R+36.7)/(R+12.92)∗6 Vo=2.5×[2–2.7/(R+9.5)]If the output voltage has been adjusted to be higher, it should be noted that the output current needs to be derated so as to be suit-able for the maximum power. If there is a possibility that a surge voltage is applied to the output section when this product is used at 12V or ±12V, connect a capacitor of approx. 0.01 to 0.1µF between the Vset and output GND terminals.To improve an accuracy of the output voltage (for example, sup-pressed to Vo±0.5% or lower), arrange the wiring as shown below to adjust the output voltage.•DUAL-OUTPUT CONNECTION METHOD(except CCP Type) As for a dual-output converter, it is also possible to obtain a dou-ble-output voltage (24V output for ±12V output) by connecting a load between the plus and minus outputs with the GND terminal open.NOISE REDUCTIONIn measuring the converter noise, a value may have a significantly large deviation according to a measuring method in case of an inaccurate measurement. The measurement should be performed at the base of the terminal and no loop should be made to prevent flux from being gathered at a connection of a probe.In addition, it should be noted that a spike voltage largely depends upon a ripple voltmeter or a frequency band of an oscilloscope. The TDK noise measurement is performed at the base of each ter-minal in the 50MHz frequency band. If such significant deviation of values is a problem, the measurement system should be reviewed.•INPUT NOISEThis converter incorporates a filter circuit as shown below in an input section. Therefore, it operates without any external capacitor attached to the input section. A connection of a capacitor, how-ever, forms π filter and reduces input return noise.If there is a long distance from the input power supply to the input section of the converter, connect a capacitor at the base of the input terminal, if possible. The capacitor connected to the input power supply portion does not have so much effect in some cases.A long distance from the input power supply to the input section of the converter may cause high impedance of an input line, thereby increasing spike noise. Therefore, it is recommended to connect a capacitor in this condition, if possible.A capacity range of the external capacitor is approx. 0 to 470µF. Select and connect the optimum one according to your conditions for use.•OUTPUT NOISEIf an output ripple is reduced, connect a capacitor of approx. 0 to 220µF to the output section of the converter. The noise is further reduced by a connection of π filter as shown below. In this connec-tion, the filter should be of around 0 to 100µF.To reduce output spike noise, connect a ceramic capacitor of approx. 0 to 1µF to the output section of the converter.If the wiring pattern between the converter output and the load is long, the capacitor should be located at the base of the load as far as possible. The capacitor installed close to the base of the output of the converter may have so much effect.Part No.Open–Vout shorted+Vout shorted XX03SF 3.3V 3.67V 2.84VXX12SF12V15V—XX12DF±12V±15V—Part No.Openwith resistance with resistance1526XX12SF12V12 to 15V∗3—XX12DF±12V±12 to ±15V∗4—(11/11)003-01 / 20051203 / ea335_cc.fm• All specifications are subject to change without notice.Characteristics, Functions, and Applications• COMMON MODE NOISETo reduce the common mode noise, connect a capacitor of 0 to 1000pF between the primary side and the secondary side. Be careful with this connection; a coupling capacitance between the input and the output becomes high if a too big capacitor is con-nected.Furthermore, care should be taken for the withstand voltage of the capacitor (500V or higher is desirable from the viewpoint of the insulation and high voltage safety requirements).If the converter is used not as an insulation type, but as a non-insulation type, a short circuit is required between the GND termi-nal of the primary side and that of the secondary side.• RADIATED NOISERadiated noise of the converter is reduced by connecting a ground terminal of the case to the GND of an input or of an output.It should be noted, however, that its effect depends upon a device to be used. In addition, the wiring pattern should be made on a bot-tom surface of the converter in a plain pattern with a GND line, if possible.SERIES AND PARALLEL CONNECTIONS • SERIES CONNECTIONIt is possible to form a series connection with wiring as shown below. When the output voltage is not turned on with this connec-tion, connect Schottky barrier diodes having a forward voltage that is as low as possible, as shown below.The Schottky barrier diodes used for this purpose should have a reverse withstand voltage twice or more the voltage between the +Vout and –Vout terminals. The output current should be used at a level equal to or lower than the smaller rated current of the con-verters.• PARALLEL OPERATIONParallel operation to increase output current is not possible.SOLDERING CONDITIONS Soldering dip: 260°C, 10s max.Soldering iron: 350°C, 3s max.CLEANING CONDITIONSIt is recommended that the PC board should not be cleaned after soldering. It, however, has already been checked that there is no problem as a result of the following cleaning tests.When cleaning with one of the following cleaning agents, it should be used under these conditions. When using cleaning agent other than the following, please consult TDK before use.• CLEANING AGENTS AND TEST CONDITIONS Clean Through 750H (Kao Corporation)(1) Cleaning (Agitation) 60°C/4min(2) Rinsing (Agitation, water) 60°C/8min (3) Drying 70°C/6minPine Alpha ST100S (Arakawa Chemical Industries, Ltd.)(1) Cleaning (Agitation) 60°C/5min(2) Rinsing (Agitation, water) 60°C/3min (3) Drying 70°C/6min Terpene Cleaner EC-7R(1) Cleaning (Agitation) 60°C/5min (2) Rinsing (Agitation, IPA) 30°C/10min (3) Drying 70°C/6minIsopropyl Alcohol (Tokuyama Corp., etc.)(1) Ultrasonic cleaning 60°C/1min (2) Cooling bath cleaning R.T./1min (3) Vapor cleaning 83°C/1min元器件交易网。
Dake 1-1 2C 手动螺栓杠杆压力钳说明书
Dake CorporationPhone: 800.937.3253DAKE RATCHET LEVER ARBOR PRESSModel 1-1/2CINSTRUCTIONAL MANUALWARNING!Read and understand all instructions and responsibilities before operating. Failure to followsafety instructions and labels could result in serious injury.TABLE OF CONTENTSDAKE STANDARD LIMITED WARRANTY (2)RETURN & REFUND POLICY (4)DAKE STANDARD TERMS & CONDITIONS OF SALE (5)SPECIFICATIONS (6)SAFETY (6)HANDLE POSITION (7)OPERATION (7)MAINTENANCE (7)LUBRICATION (7)EXPLODED VIEW & PARTS LIST (8)EXPLODED PARTS VIEW (8)PARTS LIST (9)ORDERING INFORMATION (9)DAKE STANDARD LIMITED WARRANTYFinished MachinesDake warrants to the original purchaser the finished machine manufactured or distributed by it to be free from defects in material and workmanship under normal use and service within 1 year (12 months) from the delivery date to the end user.PartsDake warrants to the original purchaser the component part manufactured or distributed by it to be free from defects in material and workmanship under normal use and service within 30 days from the delivery date to the end user. The standard limited warranty includes the replacement of the defective component part at no cost to the end user.Sale of Service (Repairs)Dake warrants to the original purchaser the component part repaired by Dake Corporation at the manufacturing facility to be free from defects in material and workmanship under normal use and service within 90 days from the return date to the end user, as it pertains to the repair work completed. The standard limited warranty includes repair of the defective component part, at no cost to the end user. Warranty ProcessSubject to the conditions hereinafter set forth, the manufacturer will repair or replace any portion of the product that proves defective in materials or workmanship. The manufacturer retains the sole right and option, after inspection, to determine whether to repair or replace defective equipment, parts or components. The manufacturer will assume ownership of any defective parts replaced under this warranty.All requested warranty claims must be communicated to the distributor or representative responsible for the sale. Once communication has been initiated, the Warranty Representative at Dake Customer Service must be contacted for approval:Phone: (800) 937-3253Email: ****************************When contacting Dake, please have the following information readily available: - Model # - Serial # - Sales Order #Purchasers who notify Dake within the warranty period will be issued a Case number and/or a Return Material Authorization (RMA) number. If the item is to be returned per Dake’s request, the RMA number must be clearly written on the exterior packaging. Any item shipped to Dake without an RMA will not be processed.Warranty Exceptions:The following conditions are not applicable to the standard limited warranty:a) Part installation or machine service was not completed by a certified professional, and is not inaccordance with applicable local codes, ordinances and good trade practices.b) Defects or malfunctions resulting from improper installation or failure to operate or maintain theunit in accordance with the printed instructions provided.c) Defects or malfunctions resulting from abuse, accident, neglect or damage outside of prepaidfreight terms.d) Normal maintenance service or preventative maintenance, and the parts used in connection withsuch service.e) Units and parts which have been altered or repaired, other than by the manufacturer specificallyauthorized by the manufacturer.f) Alterations made to the machine that were not previously approved by the manufacturer, or thatare used for purposes other than the original design of the machine.RETURN & REFUND POLICYThank you for purchasing from Dake! If you are not entirely satisfied with your purchase, we are here to help.ReturnsAll Dake manufactured / distributed machines and parts include a 30-day return option. These policies are valid from the date of final shipment to the end user.To be eligible for a return, the item must be unused and in the same condition as received.All requested warranty claims must be communicated to the distributor or representative responsible for the sale. Once communication has been initiated, Dake Customer Service must be contacted for approval by the distributor or representative: Phone: (800) 937-3253 Email:****************************Once the return request has been approved by Customer Service, a representative will supply a Return Material Authorization (RMA) number. The returned item must have the provided RMA number clearly marked on the outside packaging. Any item received without an RMA number clearly visible on the packaging will not be processed. An RMA number can only be provided by the Dake Customer Service team and must be obtained prior to the return shipment.The item must be shipped and received back to Dake within 30 days from being issued the RMA number, or the return will be void and nonreturnable.RefundsOnce the item has been received and inspected for damages, a representative will notify the requestor referencing the provided RMA number.If the return is approved, a refund will be issued to the original method of payment, less a 20% restocking fee. The restocking fee may be waived if an order is placed at the time of return with like-value merchandise.Transportation costs are the responsibility of the end user and will not be credited upon return approval. Any item that is returned after the initial 30 days or has excessive/obvious use will not be considered for a full refund.DAKE STANDARD TERMS & CONDITIONS OF SALE All proposals and quotations for the original sale of our products are subject to the following terms and conditions:ACCEPTANCE OF ORDER: All orders are subject to acceptance by Dake at its main office in Grand Haven, Michigan.APPLICABLE LAWS: This quotation or acceptance shall be governed in all respects by the laws of the State of Michigan.CANCELLATION: We reserve the right to cancel and/or refuse to complete your order if, in our opinion, you have not established credit to promptly meet the payment terms of your order. Any cancellation from the Purchaser may be subject to a 10% cancellation fee for any of our standard machinery and/or component parts upon the discretion of Dake. All non-standard or special quotes will not be eligible for cancellation, nor returns.DELIVERY: The proposed shipment date is an estimate and is contingent upon causes bey ond Dake’s control. Under no circumstances shall Dake have any liability for loss of use or for any direct or consequential damages resulting from delay. All shipments from the Dake facilities are F.O.B.FREIGHT CLAIM: Lost or damage freight claims must b e submitted to Dake within thirty (30) days of shipment from Dake’s facility. If shipment for order was set up by the Purchaser, Dake is not liable to handle the freight claims.PERMITS AND COMPLIANCE: Dake shall not be responsible for obtaining any permits, inspections, certifications, or licenses required for the installation or use of the equipment. Dake makes no promise or representation that the equipment or any services to be furnished by Dake will conform to any federal, state, or local laws, ordinances, regulations, codes or standards. PRICES: Unless otherwise agreed to in writing, all prices are F.O.B. from our plants in Grand Haven, Michigan, Grand Prairie, Texas, and Riverside, CA. In any event, the quoted prices for component parts become invalid ten (10) days after date of quotation, and machinery may become invalid sixty (60) days after date of quotation. Unless otherwise specified in Dake’s quotation, installation services and final on-site adjustments are not included in the quotation.TAXES: Prices do not include taxes. If any sales, use or similar tax is payable to Dake in connection with any transaction or part thereof between the Purchaser and Dake with respect to goods delivered, the Purchaser will, upon demand, pay to Dake the amount of any such tax. If you are tax exempt, please include your exemption document when submitting your order.TERMS OF PAYMENT: Terms of payment are as stated in Dake’s quotation subject to credit approval by our home office. Dake will invoice Purchaser when the equipment is completed and ready for shipment. Payment terms run from invoice date. Purchaser may be required to issue a down payment before production of order, at the discretion of Dake Accounting. For credit card purchases, a 2% processing fee may be applicable to the order. The following states are exempt from the 2% processing fee: CA, CO, KS, OK, TX, FL, NY, CT, MA, and ME.WARRANTY: If, within a period of one (1) year from date of shipment of the original order, any part of any equipment sold by Dake is defective in material or workmanship and is so found after inspection by Dake, it will be replaced or repaired at the option of Dake, providing the equipment has been given normal and proper usage and is still the property of the original Purchaser. Purchased components such as Micro Drop mist system or the like, installed as a part of Dake equipment are warranted only to the extent of the original Manufacturer’s warranty. Dake is not responsible for any service work performed unless authorized in advance.THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER WRITTEN,ORAL, OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULARPURPOSE). UNDER NO CIRCUMSTANCES SHALL DAKE BE LIABLE FOR ANY INCIDENTAL ORCONSEQUENTIAL DAMAGESSPECIFICATIONSSAFETYThis is the safety alert symbol. When you see this symbol on your press be alert to the potential for personal injury.Employer is responsible to perform a hazard/PPE assessment before work activity.Follow recommended precautions and safe operating practices.HANDLE POSITIONCAUTION: NEVER PULL THE PRESS HANDLE PAST THE HORIZONTAL POSITION! To avoid personal injury and damaging the press only pull until the handle is horizontal, then return the handle back up as far as it allows before bringing the handle back down. This ensures that the pawl fully engages with the gear teeth to prevent tooth damage and gear slippage that can cause harm to the machine and worker. Examples above show the ideal minimum and maximum handle positions.OPERATIONHandwheel: The handwheel (item 18) can be turned to raise or lower the ram to and from the workpiece without exerting force on the workpiece.Handle: The handle (item 10) can be used to lower the ram to exert force onto the workpiece. See safety instructions for more information on handle position.MAINTENANCELUBRICATION• Keep all working parts of the press well-oiled for easier operation.•Keep a light film of oil over the entire surface of the ram to prevent rust.EXPLODED VIEW & PARTS LISTEXPLODED PARTS VIEWPARTS LISTItem Part Name Part Number Qty1 Frame 69939 12 Socket Cap Screw (1/4”-20 x 2-3/4”)43422 13 Ram 191 14 Rest Pin 174 15 Tinners Rivet 43577 16 Brake Spring 108 17 Pawl Pin 175 18 Pawl 177 19 Lever Weight 176 110 Handle 179 111 Headless Set Screw (3/8”-16 x 5/8”)43589 412 Retaining Ring 67424 113 Spindle 180 114 Ram Cap Shim 69942 615 Screw Bolt (3/8”-16 x 1”)43328 616 Ram Cap 69940 117 Table Plate Assembly 700941 118 Handwheel 167 119 Retaining Ring 30577 120 Warning Label Tipping 79979 121 Warning Label – Ganged 300168 122 Warning Label – Pinch Point 87130 1Please contact factory for current prices.ORDERING INFORMATIONParts are available for direct purchase from Dake or through a distributor. When placing a parts order, you will need to provide the part number, name of part, and model number. All parts shipped F.O.B. Factory in Grand Haven, MI.。
DF12型内燃机车微机控制装置说明书
DF12型内燃机车微机控制装置说明书DF12机车微机控制装置是专为DF12机车优化设计研制的。
该微机控制装置可完成以下功能:●机车牵引特性控制功能●机车防空转/滑行保护功能●机车恒功/恒速控制功能（可选）●机车海拔功率修正功能（可选）●柴油机恒功率控制功能●完成机车、柴油机、电气等系统的保护功能●完成机车各系统的故障诊断、记录和显示功能1 物理参数外形尺寸：632×368×305mm机柜质量：约25kg安装要求：LCS32装置与车体之间用胶木板隔离安装方式：底部4个M8×80螺钉2 电气结构微机装置采用箱体结构。
箱体分两部分：主箱体为LCS32微机插箱，下侧为风扇盒，是一种强迫风冷式结构。
箱体上端装有4个62芯矩形插座CNA-CND，风扇盒侧面装有1个7芯圆形插座作为风扇110V供电接口，以上6个插座是微机装置与机车线路的电气接口。
2.1 LCS32插箱LCS32插箱采用17EL267插箱结构，共有8种9块插件，各插件插槽位置见插装置门盖内的插件位置表，8种插件的代号、图号、名称和插槽号的关系如下：代号图号名称插槽号17FE200A1 ZS308—300—00 开关电源插件 317FE910A1 ZS829—218—000 辅机控制插件5、6(备用)17FE910A1 ZS829—218—000 柴油机调速插件7、8（新车用）17FE840A1 ZS456—340—000 数字量输出插件 9（备用） 17FE840A1 ZS456—340—000 数字量输出插件 1017FE830A1 ZS456—330—000 数字量输入插件1117FE830A1 ZS456—330—000 数字量输入插件12（备用） 17FE850B1 ZS456—350C—000 模拟量处理插件1317FE920A1 ZS829—217—000 信号变换插件 14（新车用） 17FE820A1 ZS456—320A—000 频率串口插件 1617FE810A1 ZS456—310A—000 CPU插件192.1.1 总线结构LCS32插箱内有一块背板或称底板，用以连接插箱内各种插件，其上的总线称为FE总线，对应槽1～17号，总线部分为1A～24C，见下表：表中ILKIN和ILKOT为连锁信号，当所有插件都插上后，这条连锁路线才通，此时微机才能工作。
DF12机车电器(大连微机)
第三部份电气部分第一章概述DF12型内燃机车电气线路图是：ZJJ16-05-00-000XL-2机车电气线路图反映了机车各电器的相互联系和动作逻辑关系。
下面将以机车电气线路图为准对机车电气控制系统作一介绍。
电气线路图分为：主电路、励磁电路、辅助电路、控制电路、照明电路、行车安全电路及空调控制电路等部分。
电气线路图的几点说明：（1）方向转换开关HKF 及工况转换开关HKG的触点在图中所示的状态是司机控制器SK 手柄置于前进牵引位。
（2）各电器，如接触器、继电器以及开关的触点在图中所示的状态，是无电或无外力作用下的状态。
（3）接线柱的代号用：“/”分隔，“/”前部分表示接线柱的排数号，“/”后部分表示接线柱在该排的顺序号。
接线柱的分布是：电器柜X1-X9，正操纵台X10～X19，副操纵台X20～X29，附件柜X30~X34，车体接线盒X33、X34，柴油机接线盒X35，空调接线盒X37 ，预热锅炉X55。
（4）电气线路图中所有接触器、继电器、电磁阀线圈(除了过流继电器、过压继电器、接地继电和沙尔特宝接触器、中间继电器线圈上已有过电压吸收装置)，均需装加过压吸收装置。
第二章主电路参见电气线路图的第1,2页，组成主电路的主要电器元件有：牵引同步主发电机F，牵引电动机1～6D，主整流装置1ZL，电空接触器1C～6C，机车方向转换开关HKF，动车插座8CZ，电流传感器1～6FL和仪表等元器件。
机车在牵引工况时，是将柴油机的机械能通过三相交流同步主发电机转换为电能。
牵引发电机所发出的三相交流电经一组三相桥式整流后成为直流电，分别供给六台牵引电动机。
牵引电动机又将电能转换成机械能，带动机车的车轮转动，使机车前进或后退。
一、主发电机向牵引电动机的供电电路主发电机所发出的三相交流电由其端子U、V、W 分别沿07*6、08*6、09*6送至一组三相桥式整流装置1ZL，1ZL 的正端输出通过10～15 号导线分别送至电空接触器1C~6C的主触头，供给牵引电动机1D-6D。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
DC to DC ConvertersInsulation Type, 1.5 to 10W Output,5-year Warranty Period, UL/C-UL Certified(except CCP Type) CC SeriesFEATURES•5-year warranty period.•With input protection element.•With output variable terminal (except CCP24).•Input-output floating.•Shield type of 5-sided metal case.•External component not required.•With overcurrent protection function.•With input remote control (CCN type).•Long life without electrolytic capacitor.•Input voltage alarm function incorporated (CCP-24 type).•It is a product conforming to RoHS directive.PART NUMBERS AND RATINGSCCK TYPECCM TYPECCN TYPECCP TYPE∗1The same product can be used for the 12V output and the 15V output by using the Vset terminal.∗2The same product can be used for the ±12V output and the ±15V output by using the Vset terminal.∗3The 24V output is used as a single output with the COM. terminal of the ±12V output product open.Conformity to RoHS DirectiveOutput current InputvoltageOutput voltage3.3V5V12V∗115V∗1±12V∗2±15V∗224V∗31.5W 12V CCK-1203SF CCK-1205SF CCK-1212SF CCK-1212SF CCK-1212DF CCK-1212DF CCK-1212DF 24V CCK-2403SF CCK-2405SF CCK-2412SF CCK-2412SF CCK-2412DF CCK-2412DF CCK-2412DFOutput current InputvoltageOutput voltage112233W 5V CCM-0503SF CCM-0505SF CCM-0512SF CCM-0512SF CCM-0512DF CCM-0512DF CCM-0512DF 12V CCM-1203SF CCM-1205SF CCM-1212SF CCM-1212SF CCM-1212DF CCM-1212DF CCM-1212DF 48V CCM-4803SF CCM-4805SF CCM-4812SF CCM-4812SF CCM-4812DF CCM-4812DF CCM-4812DFOutput current Inputvoltage 3.3V5V12V15V±12V±15V24V6W 5V CCN-0503SF CCN-0505SF CCN-0512SF CCN-0512SF CCN-0512DF CCN-0512DF CCN-0512DF 24V CCN-2403SF CCN-2405SF CCN-2412SF CCN-2412SF CCN-2412DF CCN-2412DF CCN-2412DF 48V CCN-4803SF CCN-4805SF CCN-4812SF CCN-4812SF CCN-4812DF CCN-4812DF CCN-4812DFOutput current InputvoltageOutput voltage3.3V5V12V•Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.SPECIFICATIONS AND STANDARDS∗1 Typical input voltage, maximum output current∗2 Vset and –Vout are shorted.∗3 Load variation condition of 2-output product: Balance load∗4 Measurement bandwidth: 50MHz• The 2-output product can be used as a single output of 24V to 30V with the COM. terminal open.• Refer to the description of the application for information about the voltage adjustment method or the like.OUTPUT POWER - AMBIENT TEMPERATURE(DERATING)•If the operating temperature range is determined based on the case surface temperature, it should be 90°C or lower independently of a load rate.PRECAUTIONS•Parallel operation to increase output current is not possible.•Since the converter is entirely shielded by a metal case, care should be taken to isolate the case from the surrounding compo-nents and wiring pattern.Part K-0503SF CCK-0505SF CCK-0512SF CCK-0512DF CCK-1203SF CCK-1205SF CCK-1212SF CCK-1212DFMaximum output power W 1.3 1.5 1.5 1.51.3 1.5 1.5 1.5Input conditionsInput voltage Edc V 4.5 to 9(5typ.)9 to 18(12typ.)Efficiency∗1%66typ.68typ.70typ.68typ.70typ.73typ.75typ.73typ. Output voltage Edc V 3.3512±12 3.3512±12 Output voltage 2∗2 Edc V 3.67615±15 3.67615±15 Voltage variable range Edc V 2.84 to 3.67 4.3 to 612 to 1512 to 15 2.84 to 3.67 4.3 to 612 to 1512 to 15 Maximum output current mA4003001256040030012560 Maximum output current 2∗2mA3502501005035025010050 Output voltage total variation%±5max.±5max.±5max.±5max.±5max.±5max.±5max.±5max.Voltage stability Input variation mV2020304020203040 Load variation∗3mV40401006004040100600 Temperature variation mV50501001505050100150Ripple noise Ep-p∗4mV40typ.40typ.30typ.30typ.40typ.40typ.30typ.30typ. mV120max.120max.120max.120max.120max.120max.120max.120max.Part K-2403SF CCK-2405SF CCK-2412SF CCK-2412DF CCK-4803SF CCK-4805SF CCK-4812SF CCK-4812DF Maximum output power W 1.3 1.5 1.5 1.5 1.3 1.5 1.5 1.5Input conditionsInput voltage Edc V18 to 36(24typ.)36 to 72(48typ.)Efficiency∗1%70typ.75typ.75typ.75typ.70typ.75typ.75typ.75typ. Output characteristicsOutput voltage Edc V 3.3512±12 3.3512±12 Output voltage 2∗2 Edc V 3.67615±15 3.67615±15 Voltage variable range Edc V 2.84 to 3.67 4.3 to 612 to 1512 to 15 2.84 to 3.67 4.3 to 612 to 1512 to 15 Maximum output current mA4003001256040030012560 Maximum output current 2∗2mA3502501005035025010050Output voltage total variation%±5max.±5max.±5max.±5max.±5max.±5max.±5max.±5max.Voltage stability Input variation mV2020304020203040 Load variation∗3mV40401006004040100600 Temperature variation mV50501001505050100150Ripple noise Ep-p∗4mV40typ.40typ.30typ.30typ.40typ.40typ.30typ.30typ. mV120max.120max.120max.120max.120max.120max.120max.120max.SHAPES AND DIMENSIONSWeight: 6gDimensions in mm Tolerance: ±0.3RECOMMENDED PWB HOLE SIZE, LOCATION[TOP VIEW]CIRCUIT DIAGRAMS SINGLE OUTPUT TYPECCK-SF SERIES2-OUTPUT TYPECCK-DF SERIESOscillating method: Astable frequency methodOscillating frequency: Approx. 200kHz[100% load] to approx. 1200kHz[no load]MTTF: 500Fit[2000000h, 100% load]COMMON SPECIFICATIONSTERMINAL PIN CONFIGUTATION No.1+Vin No.3NC No.4–Vout TERMINAL PIN CONFIGUTATION No.1+Vin No.3–VoutNo.4Common out Overcurrent protection Yes Temperature range Operating(°C)–20 to +70[Derating is necessary when operating environment temperature exceed 50°C.]Storage(°C)–40 to +85Humidity range Amplitude 10 to 55Hz, all amplitude 1.52mm, sweep time 15min.[3 directions of X, Y, Z, each 2h]Insulation resistance Input to output, input to case, output to case: 50M Ω min.[DC.500V]Safety standards UL60950, CSA60950(C-UL) certified ××××Weight6gSPECIFICATIONS AND STANDARDS∗1 Typical input voltage, maximum output current ∗2 Vset and –Vout are shorted.∗3 Load variation condition of 2-output product: Balance load ∗4 Measurement bandwidth: 50MHz• The 2-output product can be used as a single output of 24V to 30V with the COM. terminal open.• Refer to the description of the application for information about the voltage adjustment method or the like.OUTPUT POWER - AMBIENT TEMPERATURE(DERATING)•If the operating temperature range is determined based on the case surface temperature, it should be 90°C or lower independently of a load rate.PRECAUTIONS•Parallel operation to increase output current is not possible.•Since the converter is entirely shielded by a metal case, care should be taken to isolate the case from the surrounding compo-nents and wiring pattern.Part No.CCM-0503SF CCM-0505SF CCM-0512SF CCM-0512DF CCM-1203SF CCM-1205SF CCM-1212SF CCM-1212DF Maximumoutputpower W 23332333Input conditions Input voltage Edc V 4.5 to 9(5typ.)9 to 18(12typ.)Efficiency ∗1%65typ.70typ.72typ.72typ.70typ.75typ.77typ.77typ.Output voltage Edc V 3.3512±12 3.3512±12Output voltage 2∗2 Edc V 3.67615±15 3.67615±15Voltage variable range Edc V 2.84 to 3.67 4.3 to 612 to 1512 to 15 2.84 to 3.67 4.3 to 612 to 1512 to 15Maximum output current mA 600600250125600600250125Maximum output current 2∗2mA 540500200100540500200100Output voltage total variation%±5max.±5max.±5max.±5max.±5max.±5max.±5max.±5max.VoltagestabilityInput variationmV 2020304020203040Load variation ∗3mV 40401006004040100600Temperature variation mV 50501001505050100150Ripple noise Ep-p ∗4mV 40typ.40typ.30typ.30typ.40typ.40typ.30typ.30typ.mV120max.120max.120max.120max.120max.120max.120max.120max.Part No.CCM-2403SF CCM-2405SF CCM-2412SF CCM-2412DF CCM-4803SF CCM-4805SF CCM-4812SF CCM-4812DF Maximum output power W 23332333Input conditions Input voltage Edc V 18 to 36(24typ.)36 to 72(48typ.)Efficiency ∗1%70typ.75typ.78typ.78typ.70typ.75typ.78typ.78typ.Output characteristics Output voltage Edc V 3.3512±12 3.3512±12Output voltage 2∗2 Edc V 3.67615±15 3.67615±15Voltage variable range Edc V 2.84 to 3.67 4.3 to 612 to 1512 to 15 2.84 to 3.67 4.3 to 612 to 1512 to 15Maximum output current mA 600600250125600600250125Maximum output current 2∗2mA 540500200100540500200100Output voltage total variation%±5max.±5max.±5max.±5max.±5max.±5max.±5max.±5max.VoltagestabilityInput variation mV 2020304020203040Load variation ∗3mV 40401006004040100600Temperature variationmV 50501001505050100150Ripple noise Ep-p ∗4mV 40typ.40typ.30typ.30typ.40typ.40typ.30typ.30typ.mV 120max.120max.120max.120max.120max.120max.120max.120max.SHAPES AND DIMENSIONSWeight:10gDimensions in mm Tolerance: ±0.3RECOMMENDED PWB HOLE SIZE, LOCATION[TOP VIEW]CIRCUIT DIAGRAMS SINGLE OUTPUT TYPECCM-SF SERIES2-OUTPUT TYPECCM-DF SERIESOscillating method: Astable frequency methodOscillating frequency: Approx. 200kHz[100% load] to approx. 1200kHz[no load]MTTF: 500Fit[2000000h, 100% load]COMMON SPECIFICATIONSTERMINAL PIN CONFIGUTATION No.1+Vin No.2–Vin No.3NC No.5Vset No.6+VoutTERMINAL PIN CONFIGUTATION No.1+Vin No.2–Vin No.3–VoutNo.5Vset No.6+VoutOscillating method Astable frequency methodMTTF500Fit[2000000h, 100% load]Overcurrent protection Yes Temperature range Storage(°C)–40 to +85Humidity range Amplitude 10 to 55Hz, all amplitude 1.52mm, sweep time 15min.[3 directions of X, Y, Z, each 2h]Vibration980m/s 2(100G) 6ms[6 directions, each 3 times]Insulation resistance Input to output, input to case, output to case: 50M Ω min.[DC.500V]Safety standards UL60950, CSA60950(C-UL) certified ××××SPECIFICATIONS AND STANDARDS∗1 Typical input voltage, maximum output current ∗2 Vset and –Vout are shorted.∗3 Load variation condition of 2-output product: Balance load ∗4 Measurement bandwidth: 50MHz• The 2-output product can be used as a single output of 24V to 30V with the COM. terminal open.• Refer to the description of the application for information about the voltage adjustment method or the like.OUTPUT POWER - AMBIENT TEMPERATURE(DERATING)•If the operating temperature range is determined based on the casesurface temperature, it should be 90°C or lower independently of a load rate.PRECAUTIONS•Parallel operation to increase output current is not possible.•Since the converter is entirely shielded by a metal case, care should be taken to isolate the case from the surrounding compo-nents and wiring pattern.Part No.CCN-0503SF CCN-0505SF CCN-0512SF CCN-0512DF CCN-1203SF CCN-1205SF CCN-1212SF CCN-1212DF Maximumoutputpower W 45665666Input conditions Input voltage Edc V 4.5 to 9(5typ.)9 to 18(12typ.)Efficiency ∗1%70typ.74typ.78typ.76typ.73typ.80typ.85typ.85typ.Output voltage Edc V 3.3512±12 3.3512±12Output voltage 2∗2 Edc V 3.67615±15 3.67615±15Voltage variable range Edc V 2.84 to 3.67 4.3 to 612 to 1512 to 15 2.84 to 3.67 4.3 to 612 to 1512 to 15Maximum output current mA 1200100050025015001200500250Maximum output current 2∗2mA 100080040020013001000400200Output voltage total variation%±5max.±5max.±5max.±5max.±5max.±5max.±5max.±5max.VoltagestabilityInput variationmV 2020304020203040Load variation ∗3mV 40401006004040100600Temperature variation mV 50501001505050100150Ripple noise Ep-p ∗4mV 60typ.40typ.30typ.30typ.60typ.40typ.30typ.30typ.mV120max.120max.120max.120max.120max.120max.120max.120max.Part No.CCN-2403SF CCN-2405SF CCN-2412SF CCN-2412DF CCN-4803SF CCN-4805SF CCN-4812SF CCN-4812DF Maximum output power W 56665666Input conditions Input voltage Edc V 18 to 36(24typ.)36 to 72(48typ.)Efficiency ∗1%77typ.82typ.85typ.85typ.77typ.80typ.85typ.85typ.Output characteristics Output voltage Edc V 3.3512±12 3.3512±12Output voltage 2∗2 Edc V 3.67615±15 3.67615±15Voltage variable range Edc V 2.84 to 3.67 4.3 to 612 to 1512 to 15 2.84 to 3.67 4.3 to 612 to 1512 to 15Maximum output current mA 1500120050025015001200500250Maximum output current 2∗2mA 1300100040020013001000400200Output voltage total variation%±5max.±5max.±5max.±5max.±5max.±5max.±5max.±5max.VoltagestabilityInput variation mV 2020304020203040Load variation ∗3mV 40401006004040100600Temperature variationmV 50501001505050100150Ripple noise Ep-p ∗4mV 60typ.40typ.30typ.30typ.60typ.40typ.30typ.30typ.mV 120max.120max.120max.120max.120max.120max.120max.120max.SHAPES AND DIMENSIONSWeight:17gDimensions in mm Tolerance :±0.3RECOMMENDED PWB HOLE SIZE, LOCATION[TOP VIEW]CIRCUIT DIAGRAMS SINGLE OUTPUT TYPECCN-SF SERIES2-OUTPUT TYPECCN-DF SERIESOscillating method: Astable frequency methodOscillating frequency: Approx. 150kHz[100% load] to approx. 1000kHz[no load]MTTF: 650Fit[1500000h, 100% load]COMMON SPECIFICATIONSTERMINAL PIN CONFIGUTATION No.2Vctl No.3–Vin No.6Vset TERMINAL PIN CONFIGUTATION No.2Vctl No.3–Vin No.6Vset Overcurrent protection Yes Remote ON-OFF YesTemperature range Storage(°C)–40 to +85Humidity range Operating(%)RH 20 to 95[Maximum wet-bulb temperature: 38°C, without dewing]Vibration980m/s 2(100G) 6ms[6 directions, each 3 times]ΩSafety standards UL60950, CSA60950(C-UL) certified External dimensions 41×8.5×25.8mm[W ×H ×D]SPECIFICATIONS AND STANDARDS∗1 Output voltage includes input variation, load variation, and temperature variation.∗2 Measurement bandwidth: 50MHz∗3 Typical input voltage, maximum output current∗4 Overcurrent protection function is automatic reset type.OUTPUT POWER - AMBIENT TEMPERATURE(DERATING)•If the case temperature is used for the derating, apply the range indicatedby the dashed line.CONNECTIONSThe input voltage detection output terminal (±Alarm) is a transistor output of a photo-coupler and it is insulated at the both input and output sides.PRECAUTIONS•Parallel operation to increase output current is not possible.•Since the converter is entirely shielded by a metal case, care should be taken to isolate the case from the surrounding compo-nents and wiring pattern.LOW INPUT VOLTAGE DETECTION CIRCUITThe following circuit configuration is recommended for the low input voltage detection circuit.In a rise of the power supply, the +Alarm terminal is at the low level when the input voltage is in a range of 18 to 19V.In a fall of the power supply, the +Alarm terminal is at the high level when the input voltage is in a range of 17 to 18V.Part No.CCP-2403SF CCP-2405SF CCP-2412SF Maximum output power W 7.591010.2Input conditions Input voltage Edc V 18 to 36(24typ.)18 to 36(24typ.)18 to 36(24typ.)Efficiency%80typ.83typ.85typ.Output voltage EdcV 3.3512Maximum output currentmA 23002000850Output voltage total variation ∗1%±5max.±5max.±5max.VoltagestabilityInput variationmV 202030Load variationmV 4050100Temperature variationmV 50100150Ripple noise Ep-p ∗3mV 60typ.80typ.100typ.mV 120max.120max.150max.SHAPES AND DIMENSIONSOscillating frequency: Approx. 280kHz[Fixed]MTTF: 650Fit[1500000h, 100% load]RECOMMENDED PWB HOLE SIZE, LOCATION[TOP VIEW]TERMINAL PIN CONFIGUTATIONCOMMON SPECIFICATIONSTerminal No.Function Remark3+Alarm Phototransistor Collector terminal 4–Alarm Phototransistor Emitter terminal7, 8+VoutOvercurrent protection Yes Remote ON-OFF YesTemperature range Storage(°C)–40 to +85Humidity range Operating(%)RH 95 max.[Maximum wet-bulb temperature: 38°C, without dewing]Vibration980m/s 2(100G) 6ms[6 directions, each 3 times]ΩExternal dimensions 45.5×8.5×35.0mm[W ×H ×D]Weight30gCharacteristics, Functions, and ApplicationsTERMINAL CONNECTIONBe very careful with coupling input wires. An incorrect terminal connection or polarity may damage a converter.•OUTPUT VOLTAGE ADJUSTMENT TERMINAL (Vset) (except CCP Type)The following output voltages can be outputted by connecting this terminal to an output + or – terminal. Unless the output voltage is adjusted, this terminal should be open.In addition, the voltages can be adjusted not by shorting these ter-minals, but by connecting them to resistances as shown below.•Calculation formulaConnection resistance: R(kΩ)∗1 Vo=(3.3×R+36.7)/(R+10)∗2 Vo= 2.5×[2+2.7/(R+6.8)]∗3 Vo=2.5+9.5 (R+10.9)/(R+8.2)∗4 Vo=2.5+22×(R+12.7)/(R+10)[Between two outputs]∗5 Vo=(3.3×R+36.7)/(R+12.92)∗6 Vo=2.5×[2–2.7/(R+9.5)]If the output voltage has been adjusted to be higher, it should be noted that the output current needs to be derated so as to be suit-able for the maximum power. If there is a possibility that a surge voltage is applied to the output section when this product is used at 12V or ±12V, connect a capacitor of approx. 0.01 to 0.1µF between the Vset and output GND terminals.To improve an accuracy of the output voltage (for example, sup-pressed to Vo±0.5% or lower), arrange the wiring as shown below to adjust the output voltage.•DUAL-OUTPUT CONNECTION METHOD(except CCP Type) As for a dual-output converter, it is also possible to obtain a dou-ble-output voltage (24V output for ±12V output) by connecting a load between the plus and minus outputs with the GND terminal open.NOISE REDUCTIONIn measuring the converter noise, a value may have a significantly large deviation according to a measuring method in case of an inaccurate measurement. The measurement should be performed at the base of the terminal and no loop should be made to prevent flux from being gathered at a connection of a probe.In addition, it should be noted that a spike voltage largely depends upon a ripple voltmeter or a frequency band of an oscilloscope. The TDK noise measurement is performed at the base of each ter-minal in the 50MHz frequency band. If such significant deviation of values is a problem, the measurement system should be reviewed.•INPUT NOISEThis converter incorporates a filter circuit as shown below in an input section. Therefore, it operates without any external capacitor attached to the input section. A connection of a capacitor, how-ever, forms π filter and reduces input return noise.If there is a long distance from the input power supply to the input section of the converter, connect a capacitor at the base of the input terminal, if possible. The capacitor connected to the input power supply portion does not have so much effect in some cases.A long distance from the input power supply to the input section of the converter may cause high impedance of an input line, thereby increasing spike noise. Therefore, it is recommended to connect a capacitor in this condition, if possible.A capacity range of the external capacitor is approx. 0 to 470µF. Select and connect the optimum one according to your conditions for use.•OUTPUT NOISEIf an output ripple is reduced, connect a capacitor of approx. 0 to 220µF to the output section of the converter. The noise is further reduced by a connection of π filter as shown below. In this connec-tion, the filter should be of around 0 to 100µF.To reduce output spike noise, connect a ceramic capacitor of approx. 0 to 1µF to the output section of the converter.If the wiring pattern between the converter output and the load is long, the capacitor should be located at the base of the load as far as possible. The capacitor installed close to the base of the output of the converter may have so much effect.Part No.Open–Vout shorted+Vout shorted XX03SF 3.3V 3.67V 2.84VXX12SF12V15V—XX12DF±12V±15V—Part No.Openwith resistance with resistance1526XX12SF12V12 to 15V∗3—XX12DF±12V±12 to ±15V∗4—(11/11)003-01 / 20051203 / ea335_cc.fm• All specifications are subject to change without notice.Characteristics, Functions, and Applications• COMMON MODE NOISETo reduce the common mode noise, connect a capacitor of 0 to 1000pF between the primary side and the secondary side. Be careful with this connection; a coupling capacitance between the input and the output becomes high if a too big capacitor is con-nected.Furthermore, care should be taken for the withstand voltage of the capacitor (500V or higher is desirable from the viewpoint of the insulation and high voltage safety requirements).If the converter is used not as an insulation type, but as a non-insulation type, a short circuit is required between the GND termi-nal of the primary side and that of the secondary side.• RADIATED NOISERadiated noise of the converter is reduced by connecting a ground terminal of the case to the GND of an input or of an output.It should be noted, however, that its effect depends upon a device to be used. In addition, the wiring pattern should be made on a bot-tom surface of the converter in a plain pattern with a GND line, if possible.SERIES AND PARALLEL CONNECTIONS • SERIES CONNECTIONIt is possible to form a series connection with wiring as shown below. When the output voltage is not turned on with this connec-tion, connect Schottky barrier diodes having a forward voltage that is as low as possible, as shown below.The Schottky barrier diodes used for this purpose should have a reverse withstand voltage twice or more the voltage between the +Vout and –Vout terminals. The output current should be used at a level equal to or lower than the smaller rated current of the con-verters.• PARALLEL OPERATIONParallel operation to increase output current is not possible.SOLDERING CONDITIONS Soldering dip: 260°C, 10s max.Soldering iron: 350°C, 3s max.CLEANING CONDITIONSIt is recommended that the PC board should not be cleaned after soldering. It, however, has already been checked that there is no problem as a result of the following cleaning tests.When cleaning with one of the following cleaning agents, it should be used under these conditions. When using cleaning agent other than the following, please consult TDK before use.• CLEANING AGENTS AND TEST CONDITIONS Clean Through 750H (Kao Corporation)(1) Cleaning (Agitation) 60°C/4min(2) Rinsing (Agitation, water) 60°C/8min (3) Drying 70°C/6minPine Alpha ST100S (Arakawa Chemical Industries, Ltd.)(1) Cleaning (Agitation) 60°C/5min(2) Rinsing (Agitation, water) 60°C/3min (3) Drying 70°C/6min Terpene Cleaner EC-7R(1) Cleaning (Agitation) 60°C/5min (2) Rinsing (Agitation, IPA) 30°C/10min (3) Drying 70°C/6minIsopropyl Alcohol (Tokuyama Corp., etc.)(1) Ultrasonic cleaning 60°C/1min (2) Cooling bath cleaning R.T./1min (3) Vapor cleaning 83°C/1min元器件交易网。