AA1114-2SGC-CC中文资料
Stanford EAZ0144G33A_A 产品说明书
ASSY COVER FOR M CABINET
19 EAS2246G63A
FOOT EXTENSION FOR M2 CABINET
Désignation
Designaciòn
N. Note Nota
BOUCHON NOIR POUR VIS M5
TAPÓN CASQUETE NEGRO TORNILLOS M5 2
B = on request - sur demande - a petición
C = suggested - suggeré - sugerido
7
Pos Code
Designation
Désignation
Designaciòn
N. Note Nota
ABC
1 1-16609A
SCREW TCEI
A = available - disponible - disponible
B = on request - sur demande - a petición
Designaciòn
Pedal "p", 2 conmutador GRUPO PEDAL FRENO J PEDAL FRENO ALUMINIO 2 MICRO PEDAL FRENO CAJA M TAPON-GRUPO MEDIDAS PROTECCIÓN BRIDAS PERNO PORTA BRIDAS TAPÓN NEGRO DE COB. PARA CHAPAS CABLE TIERRA CONECTOR PLATO M/TIERRA COBERTURA INF. GRUPO MIS. RAL9005 COBERT. INF. GRUPO MIS. TORNILLO AUTORR. Transformador 100/230V Transformador Transformador 230/230V Transformador 100/230V
2SC1162中文资料
2SC1162Silicon NPN EpitaxialApplicationLow frequency power amplifier complementary pair with 2SA715OutlineAbsolute Maximum Ratings (Ta = 25°C)Item Symbol Ratings Unit35V Collector to base voltage VCBO35V Collector to emitter voltage VCEO5V Emitter to base voltage VEBO2.5A Collector current ICCollector peak current I3AC(peak)0.75W Collector power dissipation PCP*110WCJunction temperature Tj150°C Storage temperature Tstg–55 to +150°C= 25°C.Note: 1.Value at TC2SC11622Electrical Characteristics (Ta = 25°C)ItemSymbol Min Typ Max Unit Test conditions Collector to base breakdown voltageV (BR)CBO35——V I C = 1 mA, I E = 0Collector to emitter breakdown voltageV (BR)CEO 35——V I C = 10 mA, R BE = ∞Emitter to base breakdown voltageV (BR)EBO 5——V I E = 1 mA, I C = 0Collector cutoff current I CBO ——20µAV CB = 35 V, I E = 0DC current transfer ratioh FE *160—320V CE = 2 V, I C = 0.5 A h FE20——V CE = 2 V, I C = 1.5 A (pulse test)Base to emitter voltage V BE —0.93 1.5V V CE = 2 V, I C = 1.5 A (pulse test)Collector to emitter saturation voltageV CE(sat)—0.5 1.0V I C = 2 A, I B = 0.2 A (pulse test)Gain bandwidth product f T—180—MHz V CE = 2 V, I C = 0.2 ANote: 1.The 2SC1162 is grouped by h FE as follows.B CD60 to 120100 to 200160 to 3202SC11623Unit: mm 元器件交易网Cautions1.Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,copyright, trademark, or other intellectual property rights for information contained in this document.Hitachi bears no responsibility for problems that may arise with third party’s rights, includingintellectual property rights, in connection with use of the information contained in this document.2.Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use.3.Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,traffic, safety equipment or medical equipment for life support.4.Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installationconditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product.5.This product is not designed to be radiation resistant.6.No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi.7.Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products.Hitachi, Ltd.Semiconductor & Integrated Circuits.Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.Hitachi Asia Pte. Ltd.16 Collyer Quay #20-00Hitachi TowerSingapore 049318Tel: 535-2100Fax: 535-1533URLNorthAmerica : http:/Europe : /hel/ecg Asia (Singapore): .sg/grp3/sicd/index.htm Asia (Taiwan): /E/Product/SICD_Frame.htm Asia (HongKong): /eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htmHitachi Asia Ltd.Taipei Branch Office3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105)Tel: <886> (2) 2718-3666Fax: <886> (2) 2718-8180Hitachi Asia (Hong Kong) Ltd.Group III (Electronic Components)7/F., North Tower, World Finance Centre,Harbour City, Canton Road, Tsim Sha Tsui,Kowloon, Hong Kong Tel: <852> (2) 735 9218Fax: <852> (2) 730 0281 Telex: 40815 HITEC HXHitachi Europe Ltd.Electronic Components Group.Whitebrook ParkLower Cookham Road MaidenheadBerkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000Fax: <44> (1628) 778322Hitachi Europe GmbHElectronic components Group Dornacher Stra§e 3D-85622 Feldkirchen, Munich GermanyTel: <49> (89) 9 9180-0Fax: <49> (89) 9 29 30 00Hitachi Semiconductor (America) Inc.179 East Tasman Drive,San Jose,CA 95134 Tel: <1> (408) 433-1990Fax: <1>(408) 433-0223For further information write to:。
LT1114ACN中文资料
1111214fbPrecision, Picoamp Input Op AmpsThe LT ®1112 dual and LT1114 quad op amps achieve a new standard in combining low cost and outstanding precision specifications.The performance of the selected prime grades matches or exceeds competitive devices. In the design of the LT1112/LT1114 however, particular emphasis has been placed on optimizing performance in the low cost plastic and SO packages. For example, the 75µV maximum offset voltage in these low cost packages is the lowest on any dual or quad non-chopper op amp.The LT1112/LT1114 also provide a full set of matching specifications, facilitating their use in such matching dependent applications as two and three op amp instru-mentation amplifiers.Another set of specifications is furnished at ±1V supplies.This, combined with the low 320µA supply current per amplifier, allows the LT1112/LT1114 to be powered by two nearly discharged AA cells.■Offset Voltage – Prime Grade: 60µV Max ■Offset Voltage – Low Cost Grade(Including Surface Mount Dual/Quad): 75µV Max ■Offset Voltage Drift: 0.5µV/°C Max ■Input Bias Current: 250pA Max■0.1Hz to 10Hz Noise: 0.3µV P-P , 2.2pA P-P ■Supply Current per Amplifier: 400µA Max ■CMRR: 120dB Min■Voltage Gain: 1 Million Min■Guaranteed Specs with ±1.0V Supplies ■Guaranteed Matching Specifications ■SO-8 Package – Standard Pinout■LT1114 in Narrow Surface Mount Package■Picoampere/Microvolt Instrumentation■Two and Three Op Amp Instrumentation Amplifers ■Thermocouple and Bridge Amplifiers ■Low Frequency Active Filters ■Photo Current Amplifiers ■Battery-Powered SystemsDistribution of Input Offset Voltage(In All Packages)INPUT OFFSET VOLTAGE (µV)–70P E R C E N T O F U N I T S202530–10301510–50–3010507050LT1112/14 • TA02TOTAL SUPPLY CURRENT = 700µA2V REFERENCE: SOURCES 1.7mA, SINKS 5mAOPTIONAL R X = 300Ω INCREASES SOURCECURRENT TO 5mA0.765V REFERENCE: SOURCES 5mA,SINKS 0.5mATEMPERATURE COEFFICIENT LIMITED BY REFERENCE = 20ppm/°CMINIMUM SUPPLY = 2.7V Dual Output, Buffered Reference (On Single 3V Supply)DESCRIPTIOUFEATURESAPPLICATIO SUTYPICAL APPLICATIOU2111214fb(Note 1)ABSOLUTE AXI U RATI GSW W WU PACKAGE/ORDER I FOR ATIOU U WConsult LTC Marketing for parts specified with wider operating temperature ranges.Supply Voltage ..................................................... ±20V Differential Input Current (Note 2)..................... ±10mA Input Voltage (Equal to Supply Voltage)............... ±20V Output Short-Circuit Duration......................... Indefinite Storage Temperature Range................ –65°C to 150°C Lead Temperature (Soldering, 10 sec)................ 300°C Operating Temperature Range (Note 11)LT1112AM/LT1112MLT1114AM/LT1114M (OBSOLETE)...–55°C to 125°C LT1112AC/LT1112C/LT1112S8LT1114AC/LT1114C/LT1114S .......... –40°C to 85°C LT1112I/LT1114I .............................. –40°C to 85°C LT1112MPS8...................................–55°C to 125°CSpecified Temperature Range (Note 12)LT1112AM/LT1112MLT1114AM/LT1114M (OBSOLETE)...–55°C to 125°C LT1112AC/LT1112C/LT1112S8LT1114AC/LT1114C/LT1114S .......... –40°C to 85°C LT1112I/LT1114I .............................. –40°C to 85°C LT1112MPS8...................................–55°C to 125°C3111214fbSYMBOL PARAMETERCONDITIONS (Note 3)MIN TYP MAXMIN TYP MAXUNITSV OS Input Offset Voltage20602575µV V S = ±1.0V4011045130µV ∆V OS Long Term Input Offset 0.30.3µV/Mo ∆Time Voltage Stability I OS Input Offset Current5018060230pA LT1114S/LT1114IS75330pA I B Input Bias Current±70±250±80±280pA LT1114S/LT1114IS±100±450pA e nInput Noise Voltage 0.1Hz to 10Hz (Note 10)0.30.90.30.9µV P-P Input Noise Voltage Densityf O = 10Hz (Note 10)16281628nV/√Hz f O = 1000Hz (Note 10)14181418nV/√Hz i nInput Noise Current 0.1Hz to 10Hz 2.2 2.2pA P-P Input Noise Current Densityf O = 10Hz 0.0300.030pA/√Hz f O = 1000Hz0.0080.008pA/√HzV CM Input Voltage Range±13.5±14.3±13.5±14.3V CMRR Common Mode Rejection Ratio V CM = ±13.5V 120136115136dB PSRR Power Supply Rejection Ratio V S = ±1.0V to ±20V 116126114126dB Minimum Supply Voltage (Note 5)±1.0±1.0VR INInput Resistance Differential Mode (Note 4)20501540M Ω Common Mode 800700G ΩA VOL Large-Signal Voltage Gain V O = ±12V, R L = 10k Ω100050008005000V/mV V O = ±10V, R L = 2k Ω80015006001300V/mVV OUT Output Voltage Swing R L = 10k Ω±13.0±14.0±13.0±14.0V R L = 2k Ω±11.0±12.4±11.0±12.4V SR Slew Rate0.160.300.160.30V/µs GBW Gain-Bandwidth Product f O = 10kHz 450750450750kHz I SSupply Current per Amplifier350400350450µA V S = ±1.0V320370320420µA Channel Separationf O = 10Hz 150150dB ∆V OS Offset Voltage Match(Note 6)3510040130µV ∆I B +Noninverting Bias Current Match 100450100500pA (Notes 6, 7)LT1114S/LT1114IS 120680pA ∆CMRR Common Mode Rejection Match (Notes 6, 8)117136113136dB ∆PSRRPower Supply Rejection Match(Notes 6, 8)114130112130dBV S = ±15V, V CM = 0V, T A = 25°C, unless otherwise noted.LT1112AM/AC LT1114AM/AC LT1112M/C/I LT1114M/C/I ELECTRICAL CHARACTERISTICS4111214fbSYMBOL PARAMETERCONDITIONS (Note 3)MIN TYP MAXMIN TYP MAXUNITSV OSInput Offset Voltage●3512045150µV LT1112MPS8●45160µV V S = ±1.2V●6022070260µV ∆V OS Average Input Offset Voltage Drift (Note 9)●0.150.50.200.75µV/°C ∆Temp LT1112MPS8●0.4 1.3µV/°C I OS Input Offset Current ●80400100500pA I B Input Bias Current ●±150±600±170±700pA V CM Input Voltage Range●±13.5±14.1±13.5±14.1V CMRR Common Mode Rejection Ratio V CM = ±13.5V ●116130111130dB PSRR Power Supply Rejection Ratio V S = ±1.2V to ±20V ●112124110124dB A VOL Large-Signal Voltage Gain V O = ±12V, R L = 10k Ω●50025004002500V/mV V O = ±10V, R L = 2k Ω●200600170500V/mVV OUT Output Voltage Swing R L = 10k Ω●±13.0±13.85±13.0±13.85V SR Slew Rate●0.120.220.120.22V/µs I S Supply Current per Amplifier ●380460380530µA ∆V OSOffset Voltage Match (Note 6)●5520070240µV LT1112MPS8●70270µV Offset Voltage Match Drift ●0.20.70.3 1.0µV/°C (Notes 6, 9)LT1112MPS8●0.5 1.9µV/°C ∆I B +Noninverting Bias Current Match (Notes 6, 7)●150750170850pA ∆CMRR Common Mode Rejection Ratio (Notes 6, 8)●112130106130dB ∆PSRRPower Supply Rejection Ratio(Notes 6, 8)●109126106126dBThe ● denotes the specifications which apply over the full operatingtemperature range of –55°C ≤ T A ≤ 125°C, otherwise specifications are at T A = 25°C. V S = ±15V, unless otherwise noted.LT1112AMJ8LT1114AMJ LT1112MJ8/MPS8LT1114MJ ELECTRICAL CHARACTERISTICSThe ● denotes the specifications which apply over the full operating temperature range of 0°C ≤ T A ≤ 70°C, otherwise specifications are at T A = 25°C. V S = ±15V, unless otherwise noted.SYMBOL PARAMETERCONDITIONS (Note 3)MIN TYP MAXMIN TYP MAXUNITSV OSInput Offset VoltageLT1112CN8●2710030125µV LT1112S8, LT1114CN/S ●3512545150µV V S = ±1.2V●5017565210µV ∆V OS Average Input Offset Voltage Drift LT1112CN8●0.150.50.20.75µV/°C ∆Temp (Note 9)LT1112S8, LT1114CN/S ●0.3 1.10.4 1.3µV/°C I OS Input Offset Current ●6022070290pA LT1114S●90420pA I B Input Bias Current●±80±300±90±350pA LT1114S●±115±550pA V CM Input Voltage Range●±13.5±14.2±13.5±14.2V CMRR Common Mode Rejection Ratio V CM = ±13.5V ●118133113133dB PSRR Power Supply Rejection Ratio V S = ±1.2V to ±20V ●114125112125dB A VOL Large-Signal Voltage Gain V O = ±12V, R L = 10k Ω●80040006504000V/mV V O = ±10V, R L = 2k Ω●50013004001000V/mVV OUT Output Voltage Swing R L = 10k Ω●±13.0±13.9±13.0±13.9V SRSlew Rate●0.140.270.140.27V/µsLT1112ACN8LT1114ACN LT1112CN8/S8/IS8LT1114CN/S/IS5111214fbThe ● denotes the specifications which apply over the full operatingtemperature range of 0°C ≤ T A ≤ 70°C, otherwise specifications are at T A = 25°C. V S = ±15V, unless otherwise noted.SYMBOL PARAMETERCONDITIONS (Note 3)MIN TYP MAXMIN TYP MAXUNITSI S Supply Current per Amplifier ●370440370500µA ∆V OSOffset Voltage Match LT1112CN8●4517055210µV (Note 6)LT1112S8, LT1114CN/S ●5522070270µV Offset Voltage Match Drift LT1112N8●0.20.70.3 1.0µV/°C (Notes 6, 9)LT1112S8, LT1114CN/S ●0.4 1.60.5 1.9µV/°C ∆I B +Noninverting Bias Current Match ●120530135620pA (Notes 6, 7)LT1114S ●160880pA ∆CMRR Common Mode Rejection Ratio (Notes 6, 8)●114134109134dB ∆PSRRPower Supply Rejection Ratio(Notes 6, 8)●110128108128dBLT1112ACN8LT1114ACN LT1112CN8/S8/IS8LT1114CN/S/IS ELECTRICAL CHARACTERISTICSSYMBOL PARAMETERCONDITIONS (Note 3)MIN TYP MAX MIN TYP MAXUNITSV OSInput Offset VoltageLT1112CN8/IN8●3011035135µV LT1112S8/IS8, LT1114CN/S/IS ●4013545160µV V S = ±1.2V●5520060240µV ∆V OS Average Input Offset Voltage Drift LT1112CN8/IN8●0.150.500.200.75µV/°C ∆Temp LT1112S8/IS8, LT1114CN/S/IS ●0.30 1.100.40 1.30µV/°C I OS Input Offset Current ●7033085400pA LT1114S/IS●110600pA I B Input Bias Current●±110±500±120±550pA LT1114S/IS●±150±800pA V CM Input Voltage Range●±13.5±14.1±13.5±14.1V CMRR Common Mode Rejection Ratio V CM = ±13.5V ●117132112132dB PSRR Power Supply Rejection Ratio V S = ±1.2V to ±20V ●113125111125dB A VOL Large-Signal Voltage Gain V O = ±12V, R L = 10k Ω●70033006003300V/mV V O = ±10V, R L = 2k Ω●4001100300900V/mVV OUT Output Voltage Swing R L = 10k Ω●±13.0±13.85±13.0±13.85V SR Slew Rate●0.130.240.130.24V/µsI S Supply Current per Amplifier ●370450370510µA ∆V OSOffset Voltage Match LT1112CN8/IN8●5018060225µV (Note 6)LT1112S8/IS8, LT1114CN/S/IS ●6023070270µV Offset Voltage Match Drift LT1112CN8/IN8●0.20.70.3 1.0µV/°C (Notes 6)LT1112S8/IS8, LT1114CN/S/IS ●0.4 1.60.5 1.9µV/°C ∆I B +Noninverting Bias Current Match ●140660155770pA (Notes 6, 7)LT1114S/IS ●1901300pA ∆CMRR Common Mode Rejection Ratio (Notes 6, 8)●113133109133dB ∆PSRRPower Supply Rejection Ratio(Notes 6, 8)●110127107127dBThe ● denotes the specifications which apply over the full operating temperature range of –40°C ≤ T A ≤ 85°C, otherwise specifications are at T A = 25°C. V S = ±15V, unless otherwise noted. (Note 12)LT1112ACN8LT1114ACN LT1112CN8/IN8/S8/IS8LT1114CN/S/IS Note 1: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to any Absolute Maximum Rating condition for extended periods may affect device reliability and lifetime.Note 2: Differential input voltages greater than 1V will cause excessive current to flow through the input protection diodes unless limiting resistance is used.Note 3: Typical parameters are defined as the 60% yield of parameter distributions of individual amplifiers; i.e., out of 100 LT1114s (or 100LT1112s) typically 240 op amps (or 120) will be better than the indicated specification.Note 4: This parameter is guaranteed by design and is not tested.6111214fbNote 5: Offset voltage, supply current and power supply rejection ratio are measured at the minimum supply voltage.Note 6: Matching parameters are the difference between amplifiers A and D and between B and C on the LT1114; between the two amplifiers on the LT1112.Note 7: This parameter is the difference between two noninverting input bias currents.Note 8: ∆CMRR and ∆PSRR are defined as follows: (1) CMRR and PSRR are measured in µV/V on the individual amplifiers. (2) The difference is calculated between the matching sides in µV/V. (3) The result is converted to dB.Note 9: This parameter is not 100% tested.ELECTRICAL CHARACTERISTICSNote 10: These parameters are not tested. More than 99% of the op amps tested during product characterization have passed the maximum limits.100% passed at 1kHz.Note 11: The LT1112AC/LT1112C/LT1112S8/LT1112I and LT1114AC/LT1114C/LT1114S/LT1114I are guaranteed functional over the temperature range of –40°C to 85°C.Note 12: The LT1112AC/LT1112C/LT1112S8/LT1114AC/LT1114C/LT1114S are guaranteed to meet specified performance from 0°C to 70°C and are designed, characterized and expected to meet specifiedperformance from –40°C to 85°C, but are not tested or QA sampled at these temperatures. The LT1112I/LT1114I are guaranteed to meet specified performance from –40°C to 85°C.TYPICAL PERFOR A CE CHARACTERISTICSU WInput Bias and Offset Current,Noninverting Bias Current Match vs TemperatureTEMPERATURE (°C)–75–200I N P U T B I A S , O F F S E T , M A T C H C U R R E N T (p A )–100100200–50–25025LT1112/14 • TPC015075100125Input Bias Current Over Common Mode RangeDistribution of Input Bias Current (In All Packages Except LT1114S)INPUT OFFSET VOLTAGE (µV)–800P E R C E N T O F U N I T S5152025–40020100LT1112/14 • TPC0610–60–2040608030Drift with Temperature LT1112S8, LT1114N/SDistribution of Offset Voltage at V S = ±1.0V (In All Packages)INPUT BIAS CURRENT (pA)–3000P E R C E N T O FU N I T S102030–200–1000100LT1112/14 • TPC03200300Drift with Temperature LT1112N8/J8, LT1114JOFFSET VOLTAGE DRIFT WITH TEMPERATURE (µV/°C)–0.8P E R C E N T O F I N P U T S10150.8LT1112/14 • TPC045–0.400.420–0.6–0.20.20.6COMMON MODE INPUT VOLTAGE (V)–15–150I N P U T B I A S C U R R E N T (p A )–100–50050150–10–505LT1112/14 • TPC021015100OFFSET VOLTAGE DRIFT WITH TEMPERATURE (µV/°C)–1.40P E R C E N T O F U N I TS1025–0.60.20.6LT1112/14 • TPC0552015–1.0–0.2 1.0 1.47111214fbDistribution of Offset VoltageMatch Drift (LT1112J8, LT1112N8,LT1114J Packages)Distribution of Offset Voltage Match∆V OS , OFFSET VOLTAGE MATCH (µV)–100P E R C E N T O F U N I T S15202560LT1112/14 • TPC07105–60–202010040–80–40080OFFSET VOLTAGE MATCH DRIFT (µV/°C)–0.80P E R C E N T O N U N I T S5101520–0.400.40.8LT1112/14 • TPC082530–0.6–0.20.20.6OFFSET VOLTAGE MATCH DRIFT (µV/°C)–1.60P E R C E N T O F U N I T S5101520–1.2–0.8–0.40LT1112/14 • TPC090.40.8 1.21.6Distribution of Offset Voltage Match Drift (LT1112S8, LT1114N,LT1114S Packages)TYPICAL PERFOR A CE CHARACTERISTICSU W0.1Hz to 10Hz Noise0.01Hz to 1Hz NoiseSupply Current per Amplifier vs Supply VoltageTIME (MONTHS)0–6C H A N G E I N O F F S E T V O L T A G E (µV )–4–20261234LT1112/14 • TPC14564Long Term Stability of Three Representative UnitsWarm-Up DriftSUPPLY VOLTAGE (V)S U P P L Y C U R R E N T P E R A M P L I F I E R (µA )400500±20LT1112/14 • TPC15300200±5±10±15600T A = 125°C T A = 25°C T A = –55°CNoise SpectrumFREQUENCY (Hz)11101001000101001000LT1112/14 • TPC10V O L T A G E N O I S E D E N S I T Y (n V /H z )C U R R E N T N O I S E D E N S I T Y (f A /H z )TIME (SEC)0N O I S E V O L T A G E (0.2µV /D I V )8LT1112/14 • TPC1124610TIME AFTER POWER ON (MINUTES)C H A N G E I N O F F S E T V O L TA G E (µV )1230.5 1.0 1.5 2.0LT1112/14 • TPC132.5TIME (SEC)0N O I S E V O L T A G E (0.2µV /D I V )80LT1112/14 • TPC122040601008111214fbCommon Mode Range and Voltage Swing with Respect to Supply VoltagesOutput Voltage Swing vs Load CurrentMinimum Supply Voltage vs Temp Voltage Gain at Minimum Supply VoltageOUTPUT CURRENT (mA)–9V +06LT1112/14 • TPC18–6–339V O U T P U T S W I N G (V )V V +V +V –V –V –SINKSOURCETEMPERATURE (°C)–75VC O M M O N M ODE R A N G E O R O U T P U T S W I N G (V )V –25LT1112/14 • TPC17V +25125V +V +V +V +V –V –V –V –75TEMPERATURE (°C)–50M I N I M U M S U P P L Y (V )6080100±1.2±0.905075LT1112/14 • TPC1640±1.0±1.1–2525100125V O L T A G E G A I N (V /m V )TYPICAL PERFOR A CE CHARACTERISTICSU WPower Supply Rejection vs FrequencyVoltage GainOUTPUT VOLTAGE (V)–1515C H A N G E I N O F F S E T V O L T A G E (µV )1050–5–15–10–505LT1112/14 • TPC191015–10FREQUENCY (Hz)0.1P O W E R S U P P L Y R E J E C T I O N RA T I O (dB )10012014010010k LT1112/14 • TPC2380601101k 100k1M4020FREQUENCY (Hz)1801001201k 100k LT1112/14 • TPC2260401010010k 1M200C O M M O N M ODE R E J E C T I O N R A T I O (d B )140Common Mode Rejection vs FrequencyChannel Separation vs FrequencyGain, Phase Shift vs FrequencyVoltage Gain vs FrequencyFREQUENCY (Hz)0.01V O L T A G E G A I N (d B )60801001M LT1112/14 • TPC204020–20110010k 01401200.110M 101k 100k FREQUENCY (MHz)0.01–10G A I N (d B )2030400.1110LT1112/14 • TPC2110200140120100160180PHASE SHIFT (DEG)FREQUENCY (Hz)1C H A N N E L S E P A R A T I O N (d B )8010012010k160LT1112/14 • TPC241001M14010100k1k9111214fbSlew Rate, Gain-Bandwidth Product and Phase Margin vs TemperatureClosed-Loop Output ImpedanceCapacitive Loading HandlingFREQUENCY (Hz)10.001O U T P U T I M P E D A N C E (Ω)0.010.11101000101001k 10k LT1112/14 • TPC26100k 1M100CAPACITIVE LOAD (µF)O V E R S H O O T (%)20406080120LT1112/14 • TPC27100TEMPERATURE (°C)–50G A I N -B A N D W I D T H P R O D U C T (k H z )05075LT1112/14 • TPC25–2525100125S L E W R A T E (V /µs )807060PHASE MARGIN (DEG)TYPICAL PERFOR A CE CHARACTERISTICSU WFREQUENCY (kHz)116P E A K -T O -P E A K O U T P U T V O L T A G E (V )202428101001000LT1112/14 • TPC301284020m V /D I VLarge-Signal Transient Response5V /D I VSmall-Signal Transient Response50µs/DIV2µs/DIVA V = +1C L = 500pF V S = ±15VA V = +1R F = 10k C F = 100pF V S = ±15VUndistorted Output Voltage vs Frequency10111214fbVoltage Follower with Input Exceeding the Common Mode Range (V S = ±5V)INPUT: ±5.2V Sine WaveLT1112 OutputOP-297 OutputThe LT1112 dual and LT1114 quad in the plastic and ceramic DIP packages are pin compatible to and directly replace such precision op amps as the OP-200, OP-297,AD706 duals and OP-400, OP-497, AD704 quads with improved price/performance.The LT1112 in the S8 surface mount package has the standard pin configuration, i.e., the same configuration as the plastic and ceramic DIP packages.The LT1114 quad is offered in the narrow 16-pin surface mount package. All competitors are in the wide 16-pin package which occupies 1.8 times the area of the narrow package. The wide package is also 1.8 times thicker than the narrow package.The inputs of the LT1112/1114 are protected with back-to-back diodes. In the voltage follower configuration, when the input is driven by a fast large-signal pulse (>1V), the input protection diodes effectively short the output to the input during slewing, and a current, limited only by the output short-circuit protection, will flow through the diodes.The use of a feedback resistor is recommended because this resistor keeps the current below the short-circuit limit, resulting in faster recovery and settling of the output.The input voltage of the LT1112/1114 should never ex-ceed the supply voltages by more than a diode drop.However, the example below shows that as the input voltage exceeds the common mode range, the LT1112’soutput clips cleanly, without any glitches or phase rever-sal. The OP-297 exhibits phase reversal. The photos also illustrate that both the input and output ranges of the LT1112 are within 800mV of the supplies. The effect of input and output overdrive on the other amplifiers in the LT1112 or LT1114 packages is negligible, as each amplifier is biased independently.Advantages of Matched Dual and Quad Op Amps In many applications the performance of a system de-pends on the matching between two operational amplifiers rather than the individual characteristics of the two op amps. Two or three op amp instrumentation amplifiers,tracking voltage references and low drift active filters are some of the circuits requiring matching between two op amps.The well-known triple op amp configuration illustrates these concepts. Output offset is a function of the difference between the offsets of the two halves of the LT1112. This error cancellation principle holds for a considerable num-ber of input referred parameters in addition to offset voltage and its drift with temperature. Input bias current will be the average of the two noninverting input currents (I B +). The difference between these two currents (∆I B +) is the offset current of the instrumentation amplifier. Com-mon mode and power supply rejections will be dependent only on the match between the two amplifiers (assuming perfect resistor matching).APPLICATIO S I FOR ATIOW UUU11111214fbThe concepts of common mode and power supply rejec-tion ratio match (∆CMRR and ∆PSRR) are best demon-strated with a numerical example:Assume CMRR A = +1µV/V or 120dB,and CMRR B = +0.75µV/V or 122.5dB,then ∆CMRR = 0.25µV/V or 132dB;if CMRR B = –0.75µV/V which is still 122.5dB,then ∆CMRR = 1.75µV/V or 115dB.Clearly the LT1112/LT1114, by specifying and guarantee-ing all of these matching parameters, can significantly improve the performance of matching-dependent circuits.Three Op Amp Instrumentation AmplifierAPPLICATIO S I FOR ATIOW UUUIN IN Typical performance of the instrumentation amplifier:Input offset voltage = 35µV Offset voltage drift = 0.3µV/°C Input bias current = 80pA Input offset current = 100pA Input resistance = 800G ΩInput noise = 0.42µV P-PWhen the instrumentation amplifier is used with high impedance sources, the LT1114 is recommended because its CMRR vs frequency performance is better than the LT1112’s. For example, with two matched 1M Ω source resistors, CMRR at 100Hz is 100dB with the LT1114, 76dB with the LT1112.This difference is explained by the fact that capacitance between adjacent pins on an IC package is about 0.25pF (including package, socket and PC board trace capaci-tances).On the dual op amp package, positive input A is next to the V – pin (AC ground), while positive input B has no AC ground pin adjacent to it, resulting in a 0.25pF input capacitance mismatch. At 100Hz, 0.25pF represents a 6.4 • 109 input impedance mismatch, which is only 76dB higher than the 1M Ω source resistors.On the quad package, all four inputs are adjacent to a power supply terminal—therefore, there is no mismatch.12111214fb(1/2 LT1112, 1/4 LT1114)+LT1112/14 • SD01SCHE ATIC DIAGRAW WUPACKAGE DESCRIPTIO13111214fb14111214fbN8 Package8-Lead PDIP (Narrow .300 Inch)(Reference LTC DWG # 05-08-1510)N Package14-Lead PDIP (Narrow .300 Inch)(Reference LTC DWG # 05-08-1510)UPACKAGE DESCRIPTIO*THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .010 INCH (0.254mm)*THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS. MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .010 INCH (0.254mm)15111214fbInformation furnished by Linear Technology Corporation is believed to be accurate and reliable.However, no responsibility is assumed for its use. Linear Technology Corporation makes no represen-tation that the interconnection of its circuits as described herein will not infringe on existing patent rights.S8 Package8-Lead Plastic Small Outline (Narrow .150 Inch)(Reference LTC DWG # 05-08-1610)S Package16-Lead Plastic Small Outline (Narrow .150 Inch)(Reference LTC DWG # 05-08-1610)UPACKAGE DESCRIPTIOSO8 0303TYP BSC2. DRAWING NOT TO SCALE3. THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS. MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .006" (0.15mm)S16 0502TYP2. DRAWING NOT TO SCALE3. THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS. MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .006" (0.15mm)16111214fbLT 0207 REV B • PRINTED IN USA© LINEAR TECHNOLOGY CORPORA TION 1992Dual Buffered ±0.617V Reference Powered by Two AA BatteriesTOTAL SUPPLY CURRENT = 700µAWORKS WITH BATTERIES DISCHARGED TO ±1.3VAT ±1.5V: MAXIMUM LOAD CURRENT = 800µA;CAN BE INCREASED WITH OPTIONAL R X , R Y ;AT R X = R Y = 750Ω LOAD CURRENT = 2mA TEMPERATURE COEFFICIENT LIMITED BY REFERENCE = 20ppm/°CLT1112/14 • TA03TYPICAL APPLICATIOURELATED PARTSPART NUMBER DESCRIPTIONCOMMENTS LT1880Rail-to-Rail Output, Picoamp Input Precision Op Amp SOT-23LT1881/LT1882Dual/Quad Rail-to-Rail Output, Picoamp Input Precision C LOAD Up to 1000pF Op AmpLT1884/LT1885Dual/Quad Rail-to-Rail Output, Picoamp Input Precision 9.5nV/√Hz Input Noise Op AmpLT6011/LT6012Dual/Quad Rail-to-Rail Output, Picoamp Input Precision 135µA Supply Current, 14nV/√HzOp AmpLinear Technology Corporation1630 McCarthy Blvd., Milpitas, CA 95035-7417(408) 432-1900 ● FAX: (408) 434-0507 ● 。
JQX-14FC2AS6AAC6NIL5资料
Dash numbers
0.67W~0.83W
10
5
0.9W~1.25W
10
5
CAUTION:
1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. 2.Pickup and release voltage are for test purposes only and are not to be used as design criteria.
2-1 0.4 0.039 0.016
Dimensions
4- 1.3 5- 1.3 6- 1.3 8- 1.3 6- 1.3
26max. 1.024max.
0.051
L L
0.051
L
0.051
L
0.051
L
0.051
L
8- 1.3
0.051
L
L
L
L
0.787
0.787
0.787
0.787
7.5
7.5
7.5
7.5
7.5
7.5
0.295
0.295
0.295
0.295
0.295
0.295
Pole-distance L: 3.5mm or 5mm 0.138 inch or 0.197 inch) JQX-14FC3:5mm(0.197 inch Mounting (Bottom view)
Operation condition
Insulation Resistance Dielectric Strength Between contacts Between contact and coil Creepage distance Shock resistance Vibartion resistance Terminals strength Relative Humidity Ambient Temperature Relative Humidity Mass 1000M min (at 500VDC) JQX-14FC3 50Hz 1000V 50Hz 5000V 3000V 4000V Surge voltage 12kV Item 7 of IEC255-5 Item 6 of IEC255-5 Item 6 of IEC255-5 Addenda B of IEC255-5 IEC68-2-27 T Ea est IEC68-2-6 Test Fc IEC68-2-21Test Ua1 2 3 0.5s -25~75 (JQX-14FC3) IEChod 1
ads1115中文版
最小值
特征值
最大值
电力供应 的要求
电力供应 电压
2
5.5
V
供应 当前
电源关闭 当前 在 25° C
0.5
2
μA
电源关闭 当前，到 125°C
5
μA
运行 当前 在 25° C
150
200
μA
运行 当前 ， 到 125° C
300
μA
电源 耗散
VDD = 5.0V
0.9
mW
VDD = 3.3V
0.5
最大额定值的绝对值
ADS1113,ADS1114,ADS1115
单位
VDD到GND
-0.3~+5.5
V
模拟输入电流
100，瞬间
mA
模拟输入电流
10，持续
mA
模拟输入电压对GND
-0.3到VDD+0.3
V
SDA，SCL，ADDR，ALERT/RDY电压对GND
-0.5到+5.5
V
最高结温
+150
℃
存储温度范围
9
SDA
SDA
SDA
数字I/O
串行数据：传输和接收数据
10
SCL
SCL
SCL
数字输入
串行时钟输入:ClocksdataonSDA
1)数控引脚可能是左浮动或接到地面。
定时要求
tLOW
tRtFtHDSTA
SCL
SDA
tBUF
tHDSTA
tHDDAT
tHIGHtSUSTAtSUSTO
tSUDAT
PSSP
300
GND AIN0
离子色谱法同时测定苹果汁中的亚硝酸盐、硝酸盐和硫酸盐
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
由于我国外贸的快速增长，装载入境货物的集装 箱数量逐年大幅上升，其中经过除害处理的集装箱携
带有毒有害物质进入我国的风险进一步加大。有毒有 害物质的入境，不但对环境造成污染，而且还危害人 民身体健康。笔者在检验检疫实践中发现，进境集装 箱熏蒸气体残留量问题尤为突出，所以，重视和加强 进境集装箱熏蒸气体残留量的测量工作十分重要。现 将两例我们在口岸现场实际测量的结果报告如下。 ２ 仪器
参考文献 ［１］ 陈淑玉，汪溥钦．禽类寄生虫学 ［Ｍ］，广州：广东科技出版社，
１９９４． ［２］ 苏锋，郑其春，郭剑雄．茶树病虫害多媒体数据库的开发研究
［Ｊ］，华东昆虫学报，２０００，９ （１） ：８０～８４． ［３］ 张春雨，刘孟军，周桂红，等．枣病虫害诊断咨询专家系统 ［Ｊ］，
河北农业大学学报，２００３，２６ （３） ：９７～１０１．
ＩＮＳＰＥＣＴＩＯＮ ＡＮＤ ＱＵＡＲＡＮＴＩＮＥ ＳＣＩＥＮＣＥ 检验检疫科学
Ｖｏｌ．１８ Ｎｏ．１ ２００８ 年第 １ 期
离子色谱法同时测定苹果汁中的亚硝酸盐、硝酸盐和硫酸盐
张新智
（ 陕西出入境检验检疫局，陕西西安，７１００６８）
摘 要：提出了用离子色谱／电导检测法测定苹果汁中的亚硝酸盐、硝酸盐和硫酸盐的方法；采用 ＩｏｎＰａｃ ＡＳ１１－ ＨＣ 阴离子交换分离柱、３０ｍｍｏＬ／Ｌ 氢氧化钾作流动相，自动再生抑制型电导检测器 ＡＳＲＳ－ ４ｍｍ，建立起针对苹果汁中亚硝 酸盐、硝酸盐和硫酸盐离子色谱分析方法，该方法有良好的线性（ 相关系数为 ９９．９２％～９９．９７％） 和重复性 （相对标准偏 差小于 ３ ％） 及准确性（ 回收率为 ８９．５％～９７．０％）。检出限分别为：亚硝酸盐（ ＮＯ）２ １ｍｇ／ｋｇ，硝酸盐（ ＮＯ３） ２ｍｇ／ｋｇ，硫 酸盐（ ＳＯ）４ ２ｍｇ／ｋｇ。
G 1111 G 1114 真空计 气压计说明书
Quick reference guideG 1111 / G 1114ENVacuum meter | barometerTable of contentsTable of contents1 About this documentation (4)1.1 Purpose of the document (4)1.2 Legal notices (4)1.3 Further information (4)2 Safety (5)2.1 Explanation of safety symbols (5)2.2 Foreseeable misuse (5)2.3 Safety instructions (6)2.4 Intended use (6)3 The product at a glance (7)3.1 The G 1100 barometer series (7)3.2 Display elements (7)3.3 Operating elements (8)3.4 Connections (9)4 Operation (10)4.1 Opening the configuration menu (10)4.2 Open the adjustment menu (12)5 Measurement Basics (13)5.1 Vacuum measurements (13)5.2 Special functions (13)5.2.1Tare function (14)5.2.2V: / V: / V: (15)6 Operation and maintenance (16)6.1 Operating and maintenance notices (16)6.2 Battery (16)6.2.1 Battery indicator (16)6.2.2 Changing battery (16)2 / 22 B-H88.0.1X.DK2-1.1Table of contents7 Error and system messages (17)8 Technical data (18)9 Service (22)9.1 Manufacturer (22)B-H88.0.1X.DK2-1.1 3 / 221 | About this documentation G 1111 / G 11141 About this documentation1.1 Purpose of the documentThis document is intended as a quick reference option.It does not replace the operating manual.For this reason, read the operating manual before operating the product for the first time.1.2 Legal noticesThis document is entrusted to the recipient for personal use only. Any impermissible transfer, duplication, translation into other languages or excerpts from this operating manual are prohibited.The manufacturer assumes no liability for print errors.1.3 Further informationSoftware version of the product:V1.1 or laterLink to the complete operating manual:For the exact product name, refer to the type plate on the rear side of the product.4 / 22 B-H88.0.1X.DK2-1.1G 1111 / G 1114 Safety | 22 Safety2.1 Explanation of safety symbolsDANGERThis symbol warns of imminent danger, which can result in death, severe bodily injury, or severe property damage in case of non-observance.CAUTIONThis symbol warns of potential dangers or harmful situations, which can cause damage to the device or to the environment in case of non-observance.NOTEThis symbol indicates processes, which can have a direct influence on operation or can trigger an unforeseen reaction in case of non-observance.2.2 Foreseeable misuseThe fault-free function and operational safety of the product can only be guaranteed if applicable safety precautions and the device-specific safety instructions for this docu-ment are observed.If these notices are disregarded, personal injury or death, as well as property damage can occur.DANGERIncorrect area of application!In order to prevent erratic behaviour of the product, personal injury and property damage, the product must be used exclusively as described in the chapter Description in the operating manual.The product is not suitable for use in explosion-prone areas!The product must not be used for diagnostic or other medical purposes on pa-tients!For measurements requiring devices that are subject to authorisation or special approvals, this product is not a substitute for such products and can only be used as an aid in preparatory or comparison measurements!B-H88.0.1X.DK2-1.1 5 / 222 | Safety G 1111 / G 11146 / 22 B-H88.0.1X.DK2-1.12.3 Safety instructionsNOTEThis product does not belong in children's hands!2.4 Intended useThe device measures the absolute pressure in the air, clean water or in non-corrosive/non-ionising gases. A direct measurement of the environmental pressure can take place or the measurement pressure is taken with a suitable hose connected to the port. Relative measurements can also be conducted with the integrated special func-tion .Applications include:G 1111 G 1114Barometric measurements (e.g. weather) Barometric measurements (e.g. weather) Vacuum measurements (down to 0.0 hPa abs., negative pressure via hose or even with complete device evacuation) Vacuum measurements (down to 0 hPa abs., negative pressure via hose or even with complete device evacuation)Pneumatic measurements (up to 14000hPa abs. or 14 bar abs.)The pressure connection is made at the supplied interchangeable pressure connection ports with suitable hoses - 4 different connection options are available as standard, many other connection options can be used easily and reliable with G 1/8 adapters. The device must only be used under the conditions and for the purposes for which it was designed.It must be handled with care and used according to the technical data (do not throw, strike, etc.). Suitable measures must be used to protect the pressure connections and be protected from dirt.NOTEComplete evacuation see.G 1111 / G 1114 The product at a glance | 3B-H88.0.1X.DK2-1.1 7 / 223 The product at a glance 3.1 The G 1100 barometer series LCD Display Front view Connection variantsTop view3.2 Display elementsDisplayBattery indicator Evaluation of the battery statusUnit display Display of the units or Min/Max/Hold informationtextMain display Measurement of the current pressure or value formin/max/holdAuxiliary displayMeasurement of the current pressure inMin/Max/Hold mode3 | The product at a glance G 1111 / G 11143.3 Operating elementsOn / Off buttonPress briefly Switch on the productActivate / deactivate lightingLong press Switch off the productReject changes in a menuUp / Down buttonPress briefly Display of the min/max valueChange value of the selected parameter Long press Reset the min/max value of the current measure-mentBoth simultaneously Rotate display, overhead display8 / 22 B-H88.0.1X.DK2-1.1G 1111 / G 1114 The product at a glance | 3Function keyPress briefly Freeze measurement (Hold)Return to measurement displayCall up next parameterLong press, 2s Start menu configuration, appears in thedisplayClose menu, changes are savedLong press, 4s Depending on the selected special function: Activa-tion of the Tare function or rapid measurementwith mean value V3.4 ConnectionsUniversal connection Interchangeable pressure connection via G1/8"thread.B-H88.0.1X.DK2-1.1 9 / 224 | Operation G 1111 / G 1114 10 / 22 B-H88.0.1X.DK2-1.14 Operation 4.1 Opening the configuration menu 1. Press the for 2 seconds to open the menu. 2. appears in the display. Release the . ParameterValues MeaningDisplay unitam aa(G 1114 )mmActivatable special functionsTare function available AVR : / AVR : / AVR : Rapid measurement with mean value over 2 s / 5 s / 10 s activatableG 1111 / G 1114 Operation | 4B-H88.0.1X.DK2-1.1 11 / 22Measuring rateSelection of the measurement speedSlow FastNautical norm correction.Inactive, display measured air pressure directlyActive, display air pressure compensated to sea level -.. Height above sea level in m for correction Shut-off timeNo automatic shut-off : :: : : Automatic shut-off after a selected time in hours and minutes, during which no buttons have beenpressed4 | Operation G 1111 / G 1114 12 / 22 B-H88.0.1X.DK2-1.1BacklightBacklight deactivated : : : : Automatic shut-off of the backlight after a selectedtime in minutes and seconds, during which nobuttons have been pressedNo automatic shut off of the backlight Factory settingsUse current configuration Reset product to factory settings.appearsin the display 4.2 Open the adjustment menuFor information refer to the operating manual!G 1111 / G 1114 Measurement Basics | 55 Measurement Basics5.1 Vacuum measurementsThe device is especially suitable to measure rough vacuum via the pressure port very fast. But if the complete device is evacuated the following has to be considered: CAUTIONDamage possible by fast complete evacuation!Due to the water tight construction a complete evacuation of the device may degrade water protection. The keypad/display screen may break loose. If the device should still be used for this application, the following options are available:Remove the o-ring of the battery compartment! The Instrument then is no more water protected! Changing battery.Specialized variants G 1111-VAC!5.2 Special functionsWith the special functions that can be selected via the , the device can be optimised for special measuring tasks. After it is switched on, the device starts up in standard measuring mode, the relevant special function is started by pressing and holding the for 4 s.B-H88.0.1X.DK2-1.1 13 / 225 | Measurement Basics G 1111 / G 1114CAUTIONAir pressure at port variant UT!With higher pressures greater than 1 bar, the hoses must be secured to prevent unintended loosening. Suitable GDZ hose clamps are used for this purpose.6x1 mm PVC GDZ-01. Up to 5 bar rel., vacuum-suitable!6x1 mm PE GDZ-02. Up to 10 bar rel., vacuum-suitable!6x1 mm PUR GDZ-03. Up to 9 bar rel., vacuum-suitable!5.2.1 Tare functionThe special function has been selected in the configuration menu.14 / 22 B-H88.0.1X.DK2-1.1G 1111 / G 1114 Measurement Basics | 5The display can be zeroed by pressing the for 4 s. If the tare function is activated, blinks in the lower display. The tare function can be reset by pressing the again for 4 s.NOTEThe tare function is independent of the zero point correction accessible via the settings menu.5.2.2 V: / V: / V:Fast measurement with mean value over 2 s / 5 s / 10 sMean value mode for measurement of heavily fluctuating pressures.In the , a special function V:, V: or V: has been selected.By pressing and holding the for 4 s. the measurement with mean value can be activated.The different mean value times of 2, 5 or 10 seconds can be selected depending on the requirement.The first parameter is shown in the auxiliary display.If the Tare function is activated when called up, this special function V can be reset by pressing and holding the for 4 s. In order to reactivate the Tare, the special function must be switched in the configuration menu.B-H88.0.1X.DK2-1.1 15 / 226 | Operation and maintenance G 1111 / G 11146 Operation and maintenance6.1 Operating and maintenance noticesNOTEPressure connections must be protected from soiling.6.2 Battery6.2.1 Battery indicatorFor additional information, refer to the operating manual!6.2.2 Changing batteryOnly use new, high-quality and suitable alkaline batteries!For additional information, refer to the operating manual!16 / 22 B-H88.0.1X.DK2-1.1G 1111 / G 1114 Error and system messages | 7B-H88.0.1X.DK2-1.1 17 / 227 Error and system messagesDisplay MeaningPossible causes RemedyCalculation notpossible Measurement data acquisition is run-ning Waiting for data collection No display, unclear charactersor no re-sponsewhen but-tons arepressedBattery depleted System error Product is defective Battery depleted Error in the product Product is defectiveReplace battery Send in for repairBattery depleted Battery depleted Replace batteryBattery depleted Battery depleted Replace battery Measuring rangeexceeded Measurement too high Product is defective Stay within allowable meas-urement rangeSend in for repairMeasuring range is undercut Measurement toolow Product is defective Stay within allowable meas-urement rangeSend in for repairSystem error Error in the product Switch product on/offReplace batteriesSend in for repair8 | Technical data G 1111 / G 111418 / 22 B-H88.0.1X.DK2-1.18Technical dataG 1111Measuring range 0.0 .. 1700.0 hPa (mbar) abs.0.00 .. 25.00 PSI abs.0.0 .. 1300 mmHg (Torr) abs.Accuracy Typ.: ± 2 hPa (at T: 5 .. 30 °C)Max.: ± 1.25 % FSSMeasuring cycle : approx. 25 measurements per second: approx. 2.5 measurements per secondOverload3000 hPa abs. Pressure connection1 hose connection, interchangeable with G1/8 universal port Display3-line segment LCD, additional symbols, illuminat-ed (adjustable white, permanent illumination) Standard function Min/Max/HoldAuto-power-Off function / if activated, switches theproduct off automaticallyAdditional functions : Tare functionV : Averaging over 2 s / 5 s / 10 sCalibrationZero point and gradient adjustment Housing Break-proof ABS housingProtection rating IP67Dimensions L*W*H [mm] and weight108 * 54 * 28 mm without pressure connector140 g, incl. batteryG 1111 / G 1114 Technical data | 8B-H88.0.1X.DK2-1.1 19 / 22Operating conditions-20 to 50 °C; 0 to 95 % r.h. (short-term condensa-tion possible) Storage temperature-20 to 70 °C Currentsupply2*AA battery (included in the scope of delivery) Current require-ment/Battery lifeapprox. 1 mA (slow measurement SLO) Operating time approx. 3000 h Battery indicator 4-stage battery status indicator,Charge indicator for low charge level: "BAT LO"Auto-power-OFF functionThe device switches off automatically if this is activated Directives and standards The devices conform to the following Directives ofthe Council for the harmonisation of legal regula-tions of the Member States:2014/30/EU EMC Directive2011/65/EU RoHSApplied harmonised standards:EN 61326-1:2013 Emission limits: Class BImmunity according to Table 1Additional error: < 1 % FSEN 50581:2012The device is intended for mobile use and/orstationary operation in the scope of the specifiedoperating conditions without further limitations.8 | Technical data G 1111 / G 111420 / 22 B-H88.0.1X.DK2-1.1G 1114Measuring range 0 .. 14000 hPa (mbar) abs.0.00 .. 199.99 PSI abs.0 .. 10500 mmHg (Torr) abs.Accuracy Typ.: ± 0.02 % FSS +/-0.1 % of value (@ 25 °C)Max.: ± 0.1 % FSS ± 0.5 % of valueMeasuring cycle : approx. 25 measurements per second: approx. 2.5 measurements per secondOverload20000 hPa abs. Pressure connection1 hose connection, interchangeable with G1/8 universal port Display3-line segment LCD, additional symbols, illuminat-ed (adjustable white, permanent illumination) Standard function Min/Max/HoldAuto-power-Off function / if activated, switches theproduct off automaticallyAdditional functions : Tare functionV : Averaging over 2 s / 5 s / 10 sCalibrationZero point and gradient adjustment Housing Break-proof ABS housingProtection rating IP67Dimensions L*W*H [mm] and weight108 * 54 * 28 mm without Pressure connector140 g, incl. battery Operating conditions -20 to 50 °C; 0 to 95 % r.h. (short-term condensa-tion possible)G 1111 / G 1114 Technical data | 8B-H88.0.1X.DK2-1.1 21 / 22Storage temperature-20 to 70 °C Currentsupply2*AA battery (included in the scope of delivery) Current require-ment/Battery lifeapprox. 0.6 mA (slow measurement SLO) Operating time approx. 5000 h Battery indicator 4-stage battery status indicator,Charge indicator for low charge level: "BAT LO"Auto-power-OFF functionThe device switches off automatically if this is activated Directives and standards The devices conform to the following Directives ofthe Council for the harmonisation of legal regula-tions of the Member States:2014/30/EU EMC Directive2011/65/EU RoHSApplied harmonised standards:EN 61326-1:2013 Emission limits: Class BImmunity according to Table 1Additional error: < 1 % FSEN 50581:2012The device is intended for mobile use and/orstationary operation in the scope of the specifiedoperating conditions without further limitations.9 | Service G 1111 / G 11149 Service9.1 ManufacturerIf you have any questions, please do not hesitate to contact us:GHM Messtechnik GmbHGHM GROUP - GreisingerHans-Sachs-Str. 2693128 Regenstauf | GERMANYEmail: |WEEE reg. no. DE 9388938622 / 22 B-H88.0.1X.DK2-1.1。
AATCC 124 中文翻译
多次家庭洗烫之后织物的表面外观（AATCC124—2001）1.目的及适用范围1.1本测试方法主要是评估经过反复家庭洗涤之后的织物的表面平整性。
1.2任何可以洗涤的织物都可以采用本方法进行表面平整性的评估。
1.3任何结构的织物，比如说机织织物、编织织物和非机织织物都可以用本方法来评估。
2.原理2.1将平整的织物试样固定在标准家用洗涤操作中。
可以采用手洗或者机洗的方法，交替的机器洗涤周期和温度以及交替的干燥程序。
采用一个标准的光源和观察区域，通过试样和大概相关的标准样进行对比，然后进行对试样的评级来评估试样。
3.术语解释3.1镇重物，在加工或者测试织物时，用来将织物的总大小或者总体积变为一个具体需要的形状的材料.3.2干燥折痕，在经过洗涤的或者干燥的试样中沿着任何方向都有的明显的折或者是线。
注：干燥折痕是由于试样在洗衣机或者干燥机里受到限制性的运动而产生的结果。
3.3耐久熨压，在使用的过程中和经过洗涤或者干洗之后具有保持原始形状、平整线缝、加压折痕和将表面的皱纹弄平的能力3.4洗烫，除去织物材料的污物或者是用稀的清洁剂洗掉织物上污点的过程，一般包括漂洗，甩干，干燥3.5表面平整性，在织物上，通过与一系列的相关标准样的对比，对试样平整性的视觉印象。
4.安全防范措施注释：这些安全措施只供参考。
在测试过程中只起到辅助作用，不必完全照作。
在测试过程中，使用者有责任采用安全的、恰当的技术来处理样品。
厂商必须提供详尽的细节，诸如材料的安全数据表等，以及其他厂商的建议。
同时还必须附有所有的OSHA标准和规则。
4.1测试工作着必须具备很好的试验操作技能，同时在试验场所要佩带安全眼罩。
4.2 1993年的AATCC标准清洗剂参考中可以看到洗涤剂的刺激性，注意不要接触到皮肤和眼睛。
4.3使用所有的化学药品都必须注意安全。
4.4运行实验室测试设备时，必须仔细阅读厂商的安全手册。
5.使用和限制5.1本测试方法仅仅用于评估能够进行洗涤的织物在经过反复家庭洗涤之后的表面平整性。
宝云兴业科贸 专业空气测计仪器 产品说明书
北京宝云兴业科贸有限公司成立于1998 年，自成立伊始，就秉持着“诚信、执着、创新、快速”的经营理念。
公司以国家相关标准为依据，引进国际先进仪器，以个性化配置方案与完善的服务体系为特色，先后成为国家卫生健康委员会、中国各省市疾控中心、卫生监督所等企事业单位的优质合作伙伴。
连续多年被推举为中国卫生监督协会环境卫生与健康专业委员会副主任委员单位，以及北京教育装备行业协会会员单位。
典型用户：国家卫生健康委员会、浙江省、福建省、安徽省、广西壮族自治区、江西省、辽宁省、河北省卫生厅、中国疾控中心、北京市疾控中心以及各省市卫生监督所、大专院校等单位。
美国TSI 公司成立于1961年，它是全球精密测量仪器设计和生产的行业领导者，出品的室内空气质量检测仪、颗粒物检测仪等都在国际上享有盛誉。
Sun Nuclear 成立于1984年，由一支经验丰富的辐射检测科学家和工程师队伍组成。
公司旨在为社会提供了一种新的测量辐射的方法，在提高了测量质量的同时也简化程序。
Mesalabs 股份有限公司是一家研发、制造及销售为一体的综合型企业，总部位于美国科罗拉多州的丹佛市。
公司主要产品包括监测仪器，数据采集仪器，气体流量校准仪器，环境监测仪及耗材等，仪器广泛应用于工业、实验室及环保等相关领域。
公司简介成功案例合作伙伴COMPANY PROFILESUCCESSFUL CASESPARTNERS美国SKC 公司是世界上最大的空气采样器制造商，是世界空气采样技术的领跑者，距今已有近60年的发展历史。
它向全球用户提供600种以上专业的空气采样产品。
日本理研计器株式会社成立于1939年，是日本知名的上市公司，也是日本首屈一指的气体测试仪器生产商，产品畅销于全球五大洲。
其生产的 FP-30MK2(C)甲醛检测仪，检测方法已被列为中国国标检测方法。
手动采样泵&检气管风速/新风量检测仪甲醛检测仪大气压力表射线检测仪水质检测套装空气采样泵流量校准器温湿度计振动测试仪细菌/病毒微生物采样系统差压计气体检测仪集中空调采样设备便携式B超检测仪在线监测系统采样附件颗粒物检测仪照度计热辐射检测仪撞击式空气微生物采样器室内空气质量检测仪测氡仪噪声检测仪水质检测仪061317263549 01082532 061520273655 05092633 0716252937产品手册 目录THE WHOLE INDUSTRYPRODUCT MANUALS01便携式采样泵（5-5000mL/min）产品特点AirChek Connect 型AirChek Connect 型便携式采样泵可通过蓝牙和USB 两种方式连接手机和电脑的低噪声采样泵。
UN1114中文资料
− 0.01 − 0.1
−1
−10
−100
Collector-base voltage VCB (V)
Input voltage VIN (V)
Output current IO (mA)
SJH00001BED
3
元器件交易网
UNR111x Series
Characteristics charts of UNR1111 IC VCE
cutoff current UNR1112/1114/111D/111E (Collector open) UNR1113 UNR1110/1115/1116/1117 UNR111F/111H UNR1119 UNR1118/111L Forward current UNR1111 transfer ratio UNR1112/111E UNR1113/1114 UNR1110 */1115 */1116 */ 1117 * UNR1118/111L UNR1119/111D/111F/111H Collector-emitter saturation voltage Output voltage high-level Output voltage low-level UNR1113 UNR111D UNR111E Transition frequency Input resistance UNR1111/1114/1115 UNR1112/1117 UNR1110/1113/111D/111E UNR1116/111F/111L UNR1118 UNR1119 UNR111H Resistance ratio UNR1111/1112/1113/111L UNR1114 UNR1118/1119 UNR111D UNR111E UNR111F UNR111H
Schneider-Electric IHP 1C 2C 定时器控制器用户指南说明书
d d _E N 02/19IHP 1C/2CProduct information / menu descriptionCCT15440CCT15441CCT15442CCT15443d d _E N 02/19The IHP with weekly program controls lighting, air conditioning, flushing, etc.|The device must not control safety-relevant applications.G etting to know the timerDisplays and operating elementsA Time displayB Channel stateC Date displayD Programmed ON timesE Display of week daysF Display of active buttonsG OK buttonH Selection buttonsI MENU buttonOperationButton FunctionMENU button•Opens the menu•In menu mode: one step back:•In programming mode: cancel programming modeSelection buttons •Switch between menu items •Increase/decrease value OK button•In menu mode: select menu item •In programming mode: confirm settingMenu structurePROGRAM TIME/DATEMANUAL CONFIG ENDCHANNEL 1TIME CHANNEL 1LANGUAGENEW SET DATEPERM ON PIN CHECK SU-WI PERM OFF FACTORY SETTINGSMODIFY WEEK DAY OVERRI ONINFO DELETEFORM DATE HOLIDAYENDENDFORM TIMEENDd d _E N 02/19The basic settings, such as date, time, etc., must be carried out when starting for the first time or following a reset.The device starts in the settings menu with the item LANGUAGE .1Select the language.2Confirm the message FORM DATE .3Select the date format.4Set the year.5Set the month.6Set the day.7Confirm the message FORM TIME .8Select the time format.9Set the hours.0Set the minute.^Select summer time/winter time.A switching time always consists of one time at which the load is switched on and one time at which the load is switched off. Y ou can either set switching times for a specific day of the week or copy them for multiple week days. Copied week days are referred to as a block.T o set a switching time, perform the following steps once for ON and once for OFF :1Confirm message about free memory slots.2Select ON or OFF .3Set the hour.4Set the minute.5Set the day of the week.6If the switching time is only to be valid for one week day, select SAVE .The switching time is set.7If the switching time is to be copied as a block for multiple week days, select COPY .8Select further days of the week and confirm in each case.Week days contained in the block are indicated in the week days display.To remove a week day from the block, select the week day again using the selection buttons.9Once the desired week days have been set, select COPY .Initial setupSetting a switching timePROGRAMCHANNELC1CHANNELC2NEWNEWd d _E N 02/19Y ou can change the time for the switching times. In the case of switching times within a block, you can select whether the modification of the time is to apply to the whole block or only to a specific week day. This week day is then removed from the block.1Select the switching time.The display runs through all switching times in sequence. If no switching time is set for a week day, this is indicated in the display by --:--.If the selected switching time is part of a block, all days of the block are shown in the week day display. The selected week day flashes.2Set the hour.3Set the minute.4If the selected switching time is only set for one week day, only the option SAVE appears.5If the selected switching time is part of a block, select MODIFY BLOCK or MODIFY WEEK DAY .- MODIFY BLOCK changes the time for all switching times of the block.- MODIFY WEEK DAY changes the time for the selected switching time. The selected switching time is re-moved from the block.Y ou can delete switching times at any time. If a switching time is part of a block, you can delete the entire block or remove the switching time from the block. Y ou can also delete all switching times of a channel simultaneously.Deleting a switching time:1Select SINGLE .2Select the switching time.The display runs through all switching times in sequence. If no switching time is set for a week day, this is indicated in the display by --:--.If the selected switching time is part of a block, all days of the block are shown in the week day display. The selected week day flashes.3If the selected switching time is only valid for one week day, only the option DELETE WEEK DAY appears.4If the selected switching time is part of a block, select DELETE BLOCK or DELETE WEEK DAY .- DELETE BLOCK deletes all switching times of the block.- DELETE WEEK DAY removes the selected switching time from the block and deletes it.Deleting all switching times of a channel:1Select DELETE ALL .2Confirm with CONFIRM .Modifying a switching timePROGRAMCHANNELC1CHANNELC2MODIFYMODIFYDeleting a switching timePROGRAMCHANNELC1CHANNELC2DELETEDELETEd d _E N 02/19With the holiday function, you can switch a channel on or off completely for a longer period. The programmed switching times do not apply while the holiday function is active. Y ou can only set one holiday time per channel.1Select ON or OFF .2Confirm BEGIN HOLIDAY .3Set the year.4Set the month.5Set the day.6Set the hour.7Confirm END HOLIDAY .8Set the year.9Set the month.0Set the day.^Set the hour.A PIN protects against unauthorized use.If you have forgotten your PIN, contact the Customer Care centre in your country, stating the serial number of your device.1Select WITH PIN .NO PIN cancels the PIN protection function.2Confirm CURRENT PIN .3Set new PIN.|The PIN digits are set one after the other with +/- and confirmed with OK . A digit that has already been set can no longer be changed. When the last digit is confirmed with OK , the PIN is saved. If in any doubt, exit the PIN setting procedure with MENU .Setting the holiday functionMANUALCHANNELC1CHANNELC2HOLIDAYHOLIDAYSetting the PINCONFIGPINd d _E N 02/19Y ou can set override or permanent switching either via the MANUAL menu or using combinations of buttons on the device.Override switchingIf you wish to switch a channel briefly to the other switching state (e.g. from ON to OFF ), activate override. This state is only valid until the next switching time.If override is active, CHANNEL OVERRIDE appears briefly in the display.Permanent switchingIf you wish to switch a channel permanently, activate permanent switching. While permanent switching is activat-ed, switching times have no effect.If you want to select whether the channel is to be switched ON or OFF permanently, use the MANUAL menu.If you use the button combinations to activate permanent switching, the channel is switched to the other switching state (e.g. from ON to OFF ).If permanent switching is active, CHANNEL PERMANENT appears briefly in the display.Activating override and permanent switchingd d _E N 02/19Y ou can reset the basic settings, such as date, time, etc. and delete or keep all switching times.Y ou have two options: Y ou can either load the factory settings via the CONFIG menu or reset the device using combinations of buttons on the device.|Loading the factory settings will also delete all switching times. If you want to reset the basic settings and retain the switching times, use the reset function.Loading factory settings1Confirm the message LOAD FACTORY SETTINGS .2Set basic settings as described in chapter “Initial setup”.Resetting1Push all four buttons on the device simultaneously.2Select the language.3If you want to retain the switching times, select RETAIN PROGRAMS .4If you want to delete all switching times, select DELETE PROGRAMS .5Set basic settings as described in chapter “Initial setup”.If you have technical questions, please contact the Customer Care Centre in your /contactResetting basic settingsCONFIGFACTORY SET-TINGSSchneider Electric Industries SAS。
AA1114-2SYC-CC中文资料
Super Bright Yellow
AA1114/2SYC/CC
Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength) , the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard).
Electrical / Optical Characteristics at TA=25°C
Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Typ. 590 588 28 25 2.0 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V
中国节能环保产品认证目录 及实施规则
序号
规则编号
规则名称
1.??????? ?
CSC/G 1101-2006
家用电冰箱
2.??????? ?
CSC/G 1102-2006
房间空气调节器
3.??????? ?
CSC/G 1103-2006
家用电动洗衣机
4.??????? ?
CSC/G 1103-2006
CSC/G 3203-2004
水资源管理系统
156.?
CSC/G 3205-2006
淋浴器
157.?
CSC/G 3206-2006
便器
158.?
CSC/G 3208-2006
淋浴房
159.?
CSC/G 3207-2004
工业洗衣机
160.?
CSC/G 3212-2007
织物漂洗产品
161.?
CSC/G 3209-2004
带式浓缩脱水一体机
60.??? ?
CSC/G 2110-2004
离心式污水泵
61.??? ?
CSC/G 2112-2006
曝气机
62.??? ?
CSC/G 2113-2006
垃圾滚筒筛
63.??? ?
CSC/G 2114-2004
离心式潜污泵
64.??? ?
CSC/G 2115-2004
纯水机
65.??? ?
115.?
CSC/G 2235-2006
太阳热水系统
116.?
CSC/G 2237-2006
燃气灶具
117.?
CSC/G 2242-2006
消耗臭氧层物质(ODS)替代产品
AATCC94中英对照
AATCC Test Method 94-2012AATCC 测试方法 94-2012Finishes in Textiles: Identification纺织品整理剂鉴别150TM 94-2012 AATCC Technical Manual/2014Developed in 1959 by AATCC Committee RR45, reactivated to RA45 2012; revised 1961, 1962, 1965, 1987; reaffirmed 1969, 1973, 1977, 1985, 2002, 2007, 2012; editorially revised 1974, 2010; editorially revised and reaffirmed 1992, 1997.本鉴别方法为AATCC委员会RR45号方法的延伸，2012年RA45号研究可行性分析后实施；于1961年，1962年，1965年，1987年分别进行修改，于1969年，1973年，1977年，1985年，2002年，2007年，2012年再确定后实施；编辑修订于1974年，2010年；编辑修订并发表实施与1992年，1997年。
1. Purpose and Scope1. 目的与范围1.1 This test method gives guidelines for qualitative identification of various finish components present on textile fabrics, yarns or fibers.1.1 本测试方法给出了各种现行使用于纺织品面料、纱线以及纤维中的整理剂的成分定性鉴别的方法指南。
1.2 The identification scheme may involve any or all of the following approaches:1.2 本鉴定方法将包括以下任意一种或全部方法：1.2.1 Sequential solvent extractions followed by identification of extracts by infrared spectroscopy (IR), gas chromatography (GC), high performance liquid chromatography (HPLC), thin layer chromatography (TLC), nuclearmagnetic resonance spectroscopy (NMR) or other instrumental or wet-chemical methods.1.2.1 按照顺序有层次的溶剂萃取的物质依次按照红外光谱（IR）、气象色谱分析（GC）、高精液相色谱（HPLC）、薄层分析分析（TLC）、核磁共振波谱（NMR）或其他仪器及溶液分析法分析鉴定。
AXIS M1114-E网络摄像头说明书
DatasheetAXIS M1114-E Network CameraOutdoor-ready,compact and adaptable HDTV cameraAXIS M1114-E with CS-mounted,varifocal DC-iris lens provides excellent image quality without motion blur in1 megapixel/HDTV resolution,where progressive scan provides crisp and clear images even in low-light areas.It offers multiple H.264and Motion JPEG streams that can be individually optimized for bandwidth and storage efficiency. The pixel counter helps verifying that the pixel resolution of an object or face fulfills regulatory or specific customer requirements.Installation outdoors is easy thanks to Power over Ethernet support,a removable sunshield and a wall bracket.The casing is made of UV resistant polymer and the operating temperature ranges from-40ºC to 50ºC(-40ºF to122ºF).>HDTV720p/1MP quality>Outdoor-ready,IP66rating>Varifocal DC-iris lens>Power over Ethernet>Pixel counterAXIS M1114-E Network Camera CameraImage sensor Progressive scan RGB CMOS1/4"Lens Varifocal,2.8-8mm,F1.2Horizontal angle of view:77°-29°Minimumillumination0.6lux,F1.2Shutter time1/8000s to1/6sVideoVideocompressionH.264Baseline Profile(MPEG-4Part10/AVC),Motion JPEGResolutions1280x800a to160x90Frame rate30fps in all resolutionsVideo streaming Multiple,individually configurable streams in H.264andMotion JPEGControllable frame rate and bandwidth,VBR/CBR H.264Pan/Tilt/Zoom Digital PTZImage settings Compression,Color,Brightness,Sharpness,Contrast,Whitebalance,Backlight compensation,Mirroring of images,Rotation-including Corridor Format,Text and image overlay,Privacy maskRotation:0°,90°,180°,270°NetworkSecurity Password protection,IP address filtering,HTTPS b encryption,IEEE802.1X b network access control,Digest authentication,Useraccess logSupported protocols IPv4/v6,HTTP,HTTPS b,SSL/TLS b,QoS Layer3DiffServ,FTP, CIFS/SMB,SMTP,Bonjour,UPnP TM,SNMP v1/v2c/v3(MIB-II), DNS,DynDNS,NTP,RTSP,RTP,TCP,UDP,IGMP,RTCP,ICMP,DHCP, ARP,SOCKS,SSHSystem integrationApplication Programming Interface Open API for software integration,including VAPIX®and AXIS Camera Application Platform,specifications at AXIS Video Hosting System(AVHS)with One-Click Connection ONVIF Profile S,specification at Analytics Video motion detection,Active tampering alarmSupport for AXIS Camera Application Platform enablinginstallation of AXIS Video Motion Detection3,AXIS Cross LineDetection,AXIS Digital Autotracking and third-party applications,see /acapEvent triggers Analytics,Edge storage events,External input,Time scheduled Event actions File upload via FTP,HTTP and network shareEmail Notification via email,HTTP and TCP Pre-and post-alarmvideo bufferingExternal output activation,Video recording to edge storage,Goto PTZ preset,Guard tourData streaming Event dataBuilt-ininstallation aidsPixel counterGeneralCasing Color:White NCS S1002-BIP66-rated acrylate enclosureMemory128MB RAM,128MB FlashPower Power over Ethernet IEEE802.3af Class1Connectors RJ4510BASE-T/100BASE-TX PoEEdge storage Support for recording to dedicated network-attached storage(NAS)For NAS recommendations see Operatingconditions-20°C to50°C(-4°F to122°F)Humidity15-100%RH(condensing)Approvals EN55022Class B,EN61000-6-1,EN61000-6-2,EN61000-3-2, EN61000-3-3,EN55024,FCC Part15Subpart B Class B,ICES-003Class B,VCCI Class B,C-tick AS/NZS CISPR22Class B,KCC KN22Class B,KN24,IEC/EN/UL60950-1Weight790g(1.74lb)IncludedaccessoriesInstallation Guide,Windows decoder1-user licenseWall bracket,Sunshield,Desiccant bagOptionalaccessoriesAxis Mounts,Axis Housings&Cabinet,Axis Midspans,AxisIlluminators,LensesFor more accessories,see VideomanagementsoftwareAXIS Camera Companion,AXIS Camera Station,Videomanagement software from Axis’Application DevelopmentPartners available on /techsup/software Languages German,French,Spanish,Italian,Russian,Simplified Chinese,Japanese,Korean,PortugueseWarranty Axis1-year warranty and AXIS Extended Warranty option,see/warrantya.1440x900(1.3MP)scaled resolution available via VAPIX®b.This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit(/),and cryptographic software written by Eric Young(*****************).More information is available at ©2014-2015Axis Communications AB.AXIS COMMUNICATIONS,AXIS,ETRAX,ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB in various jurisdictions.All other company names and products are trademarks or registered trademarks of their respective companies.We reserve the right to introduce modifications without notice.1 4 8 0 6 0 0 / E N / M 1 . 1 / 0 6 2 0 1 5。
CEAG AT-S+ Name 电源系统测试系统 AT-S+ 及 STAR+ 技术—组件和选项说明书
Central Battery Systems AC/AC Automatic T est System AT-S+ with STAR+ Technology – Components and optionsControle moduleA freely programmable control module withnon-volatile program memory and graphic displaymonitors and controls the test system. All func-tions such as mains/emergency light switchingof the devices and the emergency luminaires aretested automatically. Any faults that occur are sig-nalled immediately. An interface enables a centralmonitoring facility to be connected.In the event of a short circuit or open circuit incurrent loops, differential monitors immediatelypower on the system (maintained light) or put thesystem in readiness.• Non-volatile memory• Automatic luminaire search function• Individual luminaire monitoring• Automatic DLS/TLS search function• Selective manual reset/circuit• Selective emergency light/circuit• Password function• Final circuit fuse monitoring• Control module with multi-master mode M3Sealed keypad with 2 keys for:• Test (mains failure)• Function test start / cancel(Key DT without function)3 freely assignable function keys for:• System disable/enable• Manual reset• Cancel function test• Show fault list• Maintained light off/on• Power on complete safety lighting system(continuity lighting)• Mains failure simulation UV-A (emergencyoperation)7 control keysfor user-friendly navigationLED indicators for:• Ready• Electrical Source for Safety Services• FailureGraphic display:128 x 64 pixels, backlit, programadjustable contrast and brightness.Displays include:• Date/Time• Power source for safety services ready foroperation• Infeed of safety lighting from power source forsafety services• Power source for safety services faulty• Manual reset• Test mode• Delay-time on mains return (remaining time inmin.)• Luminaire failure with location label• UV-AV failure (location specification)• Failure/programming informationConnections• C onnection for disable switch:24V control loops for blocking the installationduring factory shutdowns with differential loopmonitoring for short-circuit and open circuitdetection. Differential monitoring: Short-circuitor open circuit result in readiness for operationof the system.• C onnection for phase monitor:24V current loop for requesting emergencylighting using differential loop monitoring forthe detection of short-circuit and open circuits.Differential monitoring: Short-circuit or opencircuit result in immediate power on (main-tained light) of the system.• C onnection for zero-potential signalcontacts and buzzers:Connection for zero-potential signal contacts, 24V 0.5 A:3 relays with common potential, 1 x switchingcontact each,One or several from 11 different messages canbe assigned to each zero-potential contact. Free-ly programmable, DIN VDE specification can becalled up at any time as a pre-setting.2 relays with common potential, 1 x open con-tact each with fixed assignment.• C onnection for analog inputs:4 of freely assignable 24 V analog inputs,switch function can be programmed negatedand non-negated, e.g. for start / cancel func-tion test, disable / enable system, manual re-set, maintained light on / off, power on safetylighting as continuity lighting.EATON - EMERGENCY LIGHTING CPS – Global Catalogue 2018 42710Central Battery Systems AC/ACAutomatic Test System AT-S+ with STAR+ T echnology – Components and optionsDisplay 128 x 64 pixel graphic display, program adjustable contrast Ilumination backlighting, program adjustable brightness Keypad sealed, with 6 function and 7 control keysReadoutInfeed of safety lighting from power source for safety services Power source for safety services ready for operation AC isolation fault External fan faultLuminaire failure with location label Manual resetDelay-time on mains returnUV-AV failure (location specification) Test mode Date/TimeFailure informationProgramming informationStatus– Ready– Electrical Source for Safety Services – FailurePotential-free signal contacts, buzzer3 freely configurable relays with common potential, 1 x switching contact each, 2 relays with fixed assignment and common potential, 1 x open contact each, 24 V 0.5 A; buzzer. Freely programmable, DIN VDE specification can be called up at any time as a pre-setting.Ordering detailsT ypeModelOrder No.Control module CU-S + with SD Plug-in module4 0071 360 371Default setting AT -S +DesignationRelay 1 C0/14/12Relay 2 C0/24/22Relay 3 C0/34/32Relay 4 C1/44Relay 5 C1/54BuzzerReady for operation XP e r m a n e n t l y c o n fi g u r e d f o r c o n t r o l o f a t e c h n i c a l c a b i n e t v e n t i l a t i o n . D e f a u l t s e t t i n g >40°C O N < 35°C O F F .Mains failure S3/S4X Mains failure DLS/3PH X Ext. source error X Circuit fault X Luminaire fault X Device fault XExt. source active XISO error XFunction test X (permanent-ly configured)Invert contactX10428 EATON - EMERGENCY LIGHTING CPS – Global Catalogue 2018。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Units mW mA mA V
SPEC NO: DSAB2772 APPROVED: J. Lu
REV NO: V.3 CHECKED: Allen Liu
DATE: MAR/05/2005 DRAWN: B.H.LI
PAGE: 2 OF 3 ERP: 1201001291
元器件交易网
Super Bright Green
AA1114/2SGC/CC
Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength) , the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard).
Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AA1114/2SGC/CC SUPER BRIGHT GREEN (GaP) WATER CLEAR 7 Typ. 16 Viewing Angle 2θ1/2 θ 120°
Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base.
Super Bright Green 105 25 140 5 -40°C To +85°C 260°C For 3 Seconds 260°C For 5 Seconds
Absolute Maximum Ratings at TA=25°C
Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Lead Solder Temperature [2] Lead Solder Temperature [3]
SPEC NO: DSAB2772 APPROVED: J. Lu
REV NO: V.3 CHECKED: Allen Liu
DATE: MAR/05/2005 DRAWN: B.H.LI
PAGE: 3 OF 3 ERP: 1201001291
Electrical / Optical Characteristics at TA=25°C
Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Green Super Bright Green Super Bright Green Super Bright Green Super Bright Green Super Bright Green Typ. 565 568 30 15 2.2 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V
SPEC NO: DSAB2772 APPROVED: J. Lu
REV NO: V.3 CHECKED: Allen Liu
DATE: MAR/05/2005 DRAWN: B.H.LI
PAGE: 1 OF 3 ERP: 1201001291
元器件交易网www.cecbห้องสมุดไป่ตู้
Selection Guide
The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode.
Package Dimensions
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice.
元器件交易网
11mm x 1.4mm BACKLIGHT
AA1114/2SGC/CC
SUPER BRIGHT GREEN
Features
LOW POWER CONSUMPTION. IDEAL FOR BACKLIGHTING. RoHS COMPLIANT.
Description