SMDJ58A中文资料
SM588X中文资料
Σ DECO SM588 × seriesAudio 3rd-order Σ∆ D/A ConverterOVERVIEWThe Σ DECO SM588 × series, fabricated using NPC’s Molybdenum-gate CMOS process, are D/A converter ICs for digital audio, that provide all the basic converter functions in miniature 8-pin packages. They each feature built-in 8-times oversampling digital filter, Σ∆ jitter-compensated D/A converter, and post-analog lowpass fil-ter converter stages required for digital audio. They can sample at up to 96kHz for 16 or 24-bit input word length. A type with built-in deemphasis filter is also available for applications requiring deemphasis.FEATURES3-wire InputI 2-channel stereo configurationI256fs, 384fs, or 512fs system clock (applied by product / version) IInput format3-wire serial, MSB first, rear-packed16 or 24-bit (applied by product / version) I8-times oversampling digital filter •32 dB stopband attenuation •±0.05 dB passband ripple IΣ∆ 2-channel D/A converter •3rd-order noise shaper •Oversampling operationI 3rd-order post-analog lowpass filter I 4.5 to 5.5 V supply voltage I 8-pin SOPIMolybdenum-gate CMOS process2-wire Input with Deemphasis FilterI 2-channel stereo configurationI256fs, 384fs, or 512fs system clock (applied by product / version) IInput format2-wire serial, MSB first, rear-packed16 or 24-bit (applied by product / version) I Deemphasis filter (fs = 44.1 kHz sample rate) I8-times oversampling digital filter •32 dB stopband attenuation •±0.05 dB passband ripple IΣ∆ 2-channel D/A converter •3rd-order noise shaper •Oversampling operationI 3rd-order post-analog lowpass filter I 4.5 to 5.5 V supply voltage I 8-pin SOPIMolybdenum-gate CMOS processAPPLICATIONSIAudio equipmentPINOUTSORDERING INFORMATIONDevice PackageSM5882AS 8-pin SOP SM5883AS SM5883BS SM5885CSSM588× seriesPACKAGE DIMENSIONS(Unit : mm)Weight : 0.07gSERIES LINEUPDevice Input length Type Pin 2 function Master clock SM5882AS162-wire input Deemphasis control384fs SM5883AS163-wire input Bit clock input384fs SM5883BS163-wire input Bit clock input256fs SM5885CS243-wire input Bit clock input512fsSM588 × seriesBLOCK DIAGRAMPIN DESCRIPTIONNumber Name I/O Description1DATA I Serial data input 2BCKI 1 1. 3-wire typeI Bit clock inputDEEM 22. 2-wire type with built-in deemphasis filterI Deemphasis ON/OFF control (44.1 kHz, ON when HIGH)3LRCI I Sample rate (fs) clock input. Left-channel input when HIGH, and right-channel input when LOW.4CLK I External clock input 5RO O Right-channel analog output 6VSS –Ground 7VDD –Supply8LOOLeft-channel analog outputBCKI*CLKDEEM*** : Not available for 2-wire input type ** : Not available for 3-wire input typeSM588 × seriesSPECIFICATIONSAbsolute Maximum RatingsV SS = 0 VRecommended Operating ConditionsV SS = 0 VDC CharacteristicsV DD = 4.5 to 5.5 V , V SS = 0 V , Ta = − 40 to 85 ° CParameterSymbol Rating Unit Supply voltage range V DD − 0.3 to 7.0V Input voltage range 1 1. All inputsAlso applicable during supply switching.V IN V SS − 0.3 to V DD + 0.3V Storage temperature range T STG − 55 to 125 ° C Power dissipationP D300mWParameterSymbol Rating Unit Supply voltage V DD 4.5 to 5.5V Operating temperatureT OPR− 40 to 85° CParameterSymbol ConditionRatingUnit min typ max Current consumption 1 1. V DD = 5 V, CLK clock input frequency f CLK = 16.9344 MHz (384fs type)/11.2896 MHz (256fs type)/22.5792MHz (512fs type), no output load.Input data: NPC pattern.I DD –12.525.0mA CLK HIGH-level input voltage V IH1 Clock input 0.7V DD ––V CLK LOW-level input voltage V IL1 Clock input––0.3V DD V CLK AC-coupled input voltage V INAC 0.7––V p-p HIGH-level input voltage 2 2. Pins BCKI (3-wire type), DEEM (2-wire type with deemphasis filter), DATA, LRCIV IH2 0.5V DD ––V LOW-level input voltage 2 V IL2 ––0.2V DD V CLK HIGH-level input current I IH V IN = V DD 2062170µA CLK LOW-level input current I IL V IN = 0 V 2062170µA Input leakage current 2I LH V IN = V DD –– 1.0µA I LLV IN= 0 V ––1.0µASM588 × seriesAC Digital CharacteristicsV DD = 4.5 to 5.5 V , V SS = 0 V , Ta = − 40 to 85 ° C System clock (CLK) 256fs type384fs type512fs typeParameterSymbol RatingUnit min typ max HIGH-level clock pulsewidth t CWH 20.0–125ns LOW-level clock pulsewidth t CWL 20.0–125ns Clock pulse cyclet XI40.0–250nsParameterSymbol RatingUnit min typ maxHIGH-level clock pulsewidth t CWH 13.15–125ns LOW-level clock pulsewidth t CWL 13.15–125ns Clock pulse cyclet XI26.3–250nsParameterSymbol RatingUnit min typ max HIGH-level clock pulsewidth t CWH 10–125ns LOW-level clock pulsewidth t CWL 10–125ns Clock pulse cyclet XI20–250nsV IH1V IL10.5V DD CLKSM588× seriesSerial inputs3-wire type (BCKI, DATA, LRCI)SM588 ×seriesAC Analog Characteristics256fs type speci fication (SM5883BS) : V SS = 0 V , V DD = 5 V , 16-bit input type,crystal oscillator frequency f OSC = 11.2896 MHz, Ta = 25 °CNote: These parameters are measured using the measurement block diagram (page 8) and the measurement circuit (page 9).384fs type speci fication (SM5882AS, SM5883AS) : V SS = 0 V , V DD = 5 V , DEEM = 0 V (2-wire type), 16-bit input type, crystal oscillator frequency f OSC = 16.9344 MHz, Ta = 25 °CNote: These parameters are measured using the measurement block diagram (page 8) and the measurement circuit (page 9).512fs type speci fication (SM5885CS) : V SS = 0 V , V DD = 5 V , 24-bit input type,crystal oscillator frequency f OSC = 22.5792MHz, Ta = 25 °CNote: These parameters are measured using the measurement block diagram (page 8) and the measurement circuit (page 9).ParameterSymbol ConditionRatingUnit min typ max Total harmonic distortion THD + N 1 kHz, 0 dB –0.00350.0130%LSI output levelV OUT1 1 kHz, 0 dB – 1.09–V rms Evaluation board output level V OUT2 1 kHz, 0 dB – 1.33–V rms Dynamic range D.R 1 kHz, −60 dB 90.496.4–dB Signal-to-noise ratio S/N 1 kHz, 0dB/ −∞92.898.8–dB Channel separationCh. Sep1 kHz, −∞ −0dB87.593.5–dBParameterSymbol ConditionRatingUnit min typ max Total harmonic distortion THD + N 1 kHz, 0 dB –0.0030.0120%LSI output levelV OUT1 1 kHz, 0 dB – 1.09–V rms Evaluation board output level V OUT2 1 kHz, 0 dB – 1.33–V rms Dynamic range D.R 1 kHz, −60 dB 90.496.4–dB Signal-to-noise ratio S/N 1 kHz, 0dB/ −∞93.099.0–dB Channel separationCh. Sep1 kHz, −∞ −0dB88.594.5–dBParameterSymbol ConditionRatingUnit min typ max Total harmonic distortion THD + N 1 kHz, 0 dB –0.00350.0130%LSI output levelV OUT1 1 kHz, 0 dB – 1.09–V rms Evaluation board output level V OUT2 1 kHz, 0 dB – 1.33–V rms Dynamic range D.R 1 kHz, −60 dB 92.098.0–dB Signal-to-noise ratio S/N 1 kHz, 0dB/ −∞92.898.8–dB Channel separationCh. Sep1 kHz, −∞ −0dB87.593.5–dBAC analog measurement block diagramAC analog measurement conditionsParameter 11. Pins LO and RO should have an output load of 10 k Ω (min).Symbol 3346A left/right-channel selectorswitchAudio Precision System Two audioanalyzer with built-in filterTotal harmonic distortion THD + N Not used 20 kHz lowpass filterOutput level V OUT Dynamic range D.R D-RANGE Signal-to-noise ratio S/N Not used 22 kHz lowpass filter A-WTDChannel separationCh. SepNot used20 kHz lowpass filterAC analog measurement circuitD A TB C K I /D E E L R C L TT22.5792M H z (512f s )Theoretical Filter CharacteristicsOverall characteristicsOverall frequency characteristicPassband characteristicParameterFrequency band Attenuation (dB)f @ fs = 44.1 kHz min typ max Passband ripple 0 to 0.4535fs 0 to 20.0 kHz −0.05–+0.05Stopband attenuation0.5465fs to 7.4535fs24.1 to 328.7 kHz32––Built-in analog LPF compensation0.4535fs20.0 kHz–−0.34–G a i n (d B )0.01.02.03.04.05.06.07.08.060 50 40 30 2010 0(× fs)0.0000.1250.2500.3750.5000.8 0.6 0.4 0.20.00.4535(× fs)G a i n (d B )2-wire input, deemphasis ON overall characteristicsDeemphasis ON overall frequency characteristicDeemphasis ON passband characteristicParameterFrequency band Attenuation (dB)f @ fs = 44.1 kHz min typ max Passband ripple 0 to 0.4535fs 0 to 20.0 kHz −0.09–+0.23Stopband attenuation0.5465fs to 7.4535fs24.1 to 328.7 kHz36––Built-in analog LPF compensation0.4535fs20.0 kHz–−0.34–G a i n (d B )(× fs)0.01.02.03.04.05.06.07.08.00102030405060(× fs)G a i n (d B )0.0000.1250.2500.3750.50012 10 8 6 4 2 00.4535FUNCTIONAL DESCRIPTIONSystem Clock (CLK)The system clock CLK frequency varies with device within the series as shown below, where fs is the input frequency on LRCI.Note that the input clock accuracy and signal-to-noise ratio greatly in fluence the AC analog characteristics. The D/A converter operates at the speed shown in the following table.System ResetThe SM588× series devices incorporate a built-in power-ON reset circuit for system reset.When power is applied, the internal arithmetic operation and output timing counter are reset, and then reset again and timing synchronized to the external input on the next LRCI rising edge. After system reset, the out-puts are muted until the 9th rising of LRCI when output muting is released.When the timing is reset, the PWM outputs may generate an output noise. An external muting circuit may be required to prevent this output noise.T able 1. System clockDevice Master clock DAC oversamplingoperationA version 384fs 48fs B, C version256/512fs32fsFigure 1. System reset timingLRCIVDDInternal ResetLO ROAudio Data InputInput data format (DATA)The input data has a format that varies with device within the series, as shown below.Input timing3-wire input (DATA, LRCI, BCKI)Serial data bits on DATA are read into the SIPO register (serial-to-parallel converter register) on the rising edge of the bit clock BCKI, and then converted to parallel data.The arithmetic operation and output timing are independent of the input timing. Accordingly, after a reset, as long as the clock frequency ratio between LRCI and the system clock CLK is maintained, phase differences between LRCI, BCKI and the system clock CLK do not affect the functional operation. Also, any jitter present on the data input clock does not appear as output pulse jitter.2-wire input (DATA, LRCI)Serial data bits on DATA are read into the SIPO register (serial-to-parallel converter register) on the rising edge of an internally generated bit clock, and then converted to parallel data.Deemphasis Filter (DEEM: 2-wire input)The 2-wire type with built-in digital deemphasis filter is designed to operate at 44.1 kHz. Deemphasis is ON when DEEM is HIGH, and OFF when DEEM is LOW.T able 2. Input formatDevice Input length FormatSM5882/SM588311. The 2-wire type supports bit clocks of 48fs (384fs) or 64fs (256fs/512fs) only.16 bits MSB first, bit serial, rear-packed, 2s complementSM588522. The 3-wire type supports bit clocks of up to 64fs.24 bitsTIMING DIAGRAMS2-wire Input Type with Deemphasis Filter Built-in3-wire Input TypeDATALRCIInternal bit clock(Generated by system clock)DATA BCKI(64fs MAX)LRCITYPICAL APPLICATIONSInput Interface Examples (fs = 44.1kHz)Note that the output analog characteristics and other specifications are not guaranteed for a particular format or application circuit.3-wire input type System clock 384fs 2-wire input type System clock 384fs3-wire input type System clock 256fs 2-wire input type System clock 256fs3-wire input type System clock 512fs 2-wire input type System clock 512fsNC9720GE2000.11。
SOCAY硕凯TVS二极管SMDJ系列产品型号
SOCAY硕凯TVS二极管SMDJ系列产品型号硕凯电子（Sylvia）一、产品型号（1）5%偏差：SMDJ5.0A，SMDJ5.0CA，SMDJ6.0A，SMDJ6.0CA，SMDJ6.5A，SMDJ6.5CA，SMDJ7.0A，SMDJ7.0CA，SMDJ7.5A，SMDJ7.5CA，SMDJ8.0A，SMDJ8.0CA，SMDJ8.5A，SMDJ8.5CA，SMDJ9.0A，SMDJ9.0CA，SMDJ10A，SMDJ10CA，SMDJ11A，SMDJ11CA，SMDJ12A，SMDJ12CA，SMDJ13A，SMDJ13CA，SMDJ14A，SMDJ14CA，SMDJ15A，SMDJ15CA，SMDJ16A，SMDJ16CA，SMDJ17A，SMDJ17CA，SMDJ18A，SMDJ18CA，SMDJ19A，SMDJ19CA，SMDJ20A，SMDJ20CA，SMDJ22A，SMDJ22CA，SMDJ24A，SMDJ24CA，SMDJ26A，SMDJ26CA，SMDJ28A，SMDJ28CA，SMDJ30A，SMDJ30CA，SMDJ33A，SMDJ33CA，SMDJ36A，SMDJ36CA，SMDJ40A，SMDJ40CA，SMDJ43A，SMDJ43CA，SMDJ45A，SMDJ45CA，SMDJ48A，SMDJ48CA，SMDJ51A，SMDJ51CA，SMDJ54A，SMDJ54CA，SMDJ58A，SMDJ58CA，SMDJ60A，SMDJ60CA，SMDJ64A，SMDJ64CA，SMDJ70A，SMDJ70CA，SMDJ75A，SMDJ75CA，SMDJ78A，SMDJ78CA，SMDJ80A，SMDJ80CA，SMDJ85A，SMDJ85CA，SMDJ90A，SMDJ90CA，SMDJ100A，SMDJ100CA，SMDJ110A，SMDJ110CA，SMDJ120A，SMDJ120CA，SMDJ130A，SMDJ130CA，SMDJ140A，SMDJ140CA，SMDJ150A，SMDJ150CA，SMDJ160A，SMDJ160CA，SMDJ170A，SMDJ170CA，SMDJ180A，SMDJ180CA，SMDJ190A，SMDJ190CA，SMDJ200A，SMDJ200CA，SMDJ220A，SMDJ220CA，SMDJ250A，SMDJ250CA，SMDJ300A，SMDJ300CA，SMDJ350A，SMDJ350CA，SMDJ400A，SMDJ400CA，SMDJ440A，SMDJ440CA。
博乐583和563XL音频宏缩放超声8音频摄影机说明书
卡兹兹 58MXA 型号高效熔炉产品说明书
Catalog No. 530-145 1-0349004DP25 CARRIER CORPORATIONFOR SERVICE OR REPAIR, FOLLOW THESE STEPS IN ORDER:FIRST: Contact the installer. You may find their name on the furnace or in your Homeowner’s Packet. If the installer’s name is not known, call your builder or home retailer if yours is a new residence.SECOND: Contact the nearest distributor. (See telephone yellow pages.)THIRD: Contact:CARRIER CORPORATIONConsumer RelationsP.O. Box 4808Syracuse, New York 13221Phone: 1-800-227-7437Model No. ____________________________________________ Unit Serial No. ________________________________________Date of Installation _____________________________________ Installed by ___________________________________________Name of Owner _______________________________________ Address of Installation __________________________________Deluxe Condensing Gas Furnace Limited Warranty(Model 58MXA)FIVE-YEAR LIMITED WARRANTY – CARRIER CORPORATION (hereinafter referred to as “Company”) warrants this furnace to be free from defects in material and workmanship. If a defect is found within five years from date of original installation of furnace (whether or not actual use begins on that date) Company will provide a new or remanufactured part, at Company’s sole option, to replace any defective part, without charge for the part itself.LIMITED WARRANTY ON HEAT EXCHANGER ONLY:A. 20-YEAR LIMITED WARRANTY ON HEAT EXCHANGER ONLY - Where the owner of the dwelling is not the original purchaser and inmulti-family dwellings (i.e., where the furnace services more than one dwelling unit) and in non-residential and other applications, the Company warrants the heat exchanger against defects in material and workmanship for a period of twenty years from the date of original installation.B. LIFETIME LIMITED WARRANTY ON HEAT EXCHANGER ONLY - The Company warrants to the original purchaser, during his or herlifetime, that the heat exchanger will be free from defects material and workmanship; provided, however, this warranty shall apply only to the original installation of the furnace in a single family dwelling (i.e., where the furnace services only one dwelling unit) used without interruption as the purchaser’s principal residence.The Company's warranty obligation in A or B above shall be, at its sole option, to provide a new heat exchanger without charge for the heat exchanger itself or allow a credit in the amount of the then current factory selling price of an equivalent heat exchanger toward the purchase price of a new Carrier furnace [without charge if the retail price of a new furnace is less than the factory price of a new or equivalent heat exchanger].None of these warranties include labor or other costs incurred for diagnosing, repairing, removing, installing, shipping, servicing or handling of either defective parts, or replacement parts, or new units.WARRANTY CONDITIONS:1.Warranties apply only to furnaces in their original installation location.2. Installation, use, care, and maintenance must be normal and in accordance with instructions contained in the Owner’s Manual and Company’sservice information.3. Defective parts must be returned to the distributor through a registered servicing dealer for credit.4. All work shall be performed during normal working hours.LIMITATIONS OF WARRANTIES – ALL IMPLIED WARRANTIES (INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY LIMITED IN DURATION TO THE PERIOD FOR WHICH THE LIMITED WARRANTYIS GIVEN AND APPLIES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE MAY NOT APPLY TO YOU. THE EXPRESSED WARRANTIES MADE IN THIS WARRANTY ARE EXCLUSIVE AND MAY NOT BE ALTERED, ENLARGED, OR CHANGED BY ANY DISTRIBUTOR, DEALER, OR OTHER PERSON, WHATSOEVER.COMPANY WILL NOT BE RESPONSIBLE FOR:1. Normal maintenance as outlined in the installation and servicing instructions or Owner’s Manual, including filter cleaning and/or replacement andlubrication.2. Damage or repairs required as a consequence of faulty installation, misapplication, abuse, improper servicing, unauthorized alteration or improperoperation.3. Failure to start due to voltage conditions, blown fuses, open circuit breakers, or damages due to the inadequacy or interruption of electrical service.4. Damage as a result of floods, winds, fires, lightning, accidents, corrosive environments or other conditions beyond the control of Company.5. Parts not supplied or designated by Company, or damages resulting from their use.6. Company furnaces installed outside the continental U.S.A., Alaska, Hawaii, and Canada.7. Electricity or fuel costs, or increases in electricity or fuel costs from any reason whatsoever, including additional or unusual use of supplementalelectric heat.8. ANY SPECIAL INDIRECT OR CONSEQUENTIAL PROPERTY OR COMMERCIAL DAMAGE OF ANY NATURE WHATSOEVER. Some states donot allow the exclusion of incidental or consequential damages, so the above limitation may not apply to you.This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.。
SM5852-015-D-3-L中文资料
FEATURES
• • • • • • • Amplified, calibrated, fully signal conditioned output span of 4.0 VDC FS (0.5 to 4.5 V signal) Digital temperature and calibrated 2 pressure available through I C interface Output ratiometric with supply voltage Multi-order correction for pressure nonlinearity (factory programmed) Multi-order correction for temperature coefficient of span and offset (factory programmed) Gage, differential, and absolute versions SMI’s unique low-pressure die allows for a full-scale pressure range of 0-0.15 PSI Barometric measurement Medical instrumentation Pneumatic control Gas flow Respirators and ventilators Heating, Ventilation and Air Conditioning (HVAC)
SMI Multi-Order Pressure and Temperature Correction ASIC
coefficients are available for correcting pressure and temperature non-linearity. The unique coefficients are determined during a calibration process performed at the factory. Factory calibration is the last step performed which means the effect of the package on the pressure signal will also be taken into account. This provides a great advantage over conventional laser-trimming approaches. The DSP outputs a corrected digital word, which travels to a 12-bit digital to analog converter (DAC) to provide a calibrated analog output. In addition to the analog output, the corrected pressure signal is 2 accessible through an I C digital interface. See SMI application note AN05-001 for a detailed description of how to read out the digital corrected pressure signal using the I2C bus interface.
MAA50-2K481515SBP中文资料
Switching on standart diagram
~In (L) ~In (N)
ground
FUin
~In (L) ~In (N)
+Out
Power module
Case
-Out
Сout1 Сout2
Rheat
FUin – current safety device 1A for input voltage 220VAC, 2A for input voltage 115VAC. Sout – ceramic condenser capacity 0,47-15 mcF with corresponding operating voltage to decrease high-frequency noise level. Sout2 – electronic condenser capacity 22-100 mcF in consideration with operating voltage and polarity. It makes for purpose to decrease
tel/fax +420-266-107-609
元器件交易网
Switching Power Supplies МАА Series MAA50
Output settings
№ pin Single-channel Dual-channel Triple-channel
1 case case case
Uout1 less than 20%
Output 2 and 3 multi-output execution (Inom 10 – 100%)
±13
Uout2&3 differs from
Magistra TAV 58 产品说明书
15 TAV 58EBRTABLE POS.CODE ITALIAN ENGLISH FRANÇAIS DEUTSCH MAGISTRA TAV. 581PABF800294FACCIATA EST.EBRA EXTERNAL FACE DEVANTURE EXTERNE AUSSENVORDERWANDMAGISTRA TAV. 581PABF800293FACCIATA EST.EBR EXTERNAL FACE DEVANTURE EXTERNE AUSSENVORDERWANDMAGISTRA TAV. 582GABF800110AS.CRUSCOTTO GBR CONTROL PANEL PANNEAU DE COMMANDE STIRNBRETTMAGISTRA TAV. 582GABF800110AS.CRUSCOTTO GBR CONTROL PANEL PANNEAU DE COMMANDE STIRNBRETTMAGISTRA TAV. T.UN.PIANTANE BRG SIDE CROSSBAR CROISILLON LATERAL QUERSTRÄNGENMAGISTRA TAV. T.UN.PIANTANE BRG SIDE CROSSBAR CROISILLON LATERAL QUERSTRÄNGENMAGISTRA TAV. 584RTBF900119V.M8X10 APPOG.VASCA BRE TANKE SUPPORT SUPPORT CUVE REGLERHALTERUNGMAGISTRA TAV. 584RTBF900119V.M8X10 APPOG.VASCA BRE TANKE SUPPORT SUPPORT CUVE REGLERHALTERUNGMAGISTRA TAV. 585PABF900226PIANTANA ANT.SX BRG FRONT LEFT SUPPORT COLONNE AVANT GAUCHE SÄULE VORNE LINKSMAGISTRA TAV. 585PABF900226PIANTANA ANT.SX BRG FRONT LEFT SUPPORT COLONNE AVANT GAUCHE SÄULE VORNE LINKSMAGISTRA TAV. 586GABF800108AS.BASAM.GBR ACC.BASE SOUBASSEMENT UNTERGESTELLMAGISTRA TAV. 586GABF800108AS.BASAM.GBR ACC.BASE SOUBASSEMENT UNTERGESTELLMAGISTRA TAV. 587PABF900247TRA.ANT.UN.PIANTANE BRE BACK CROSSBAR CROISILLON ANTÉRIEUR VORDERER QUERTRÄGER MAGISTRA TAV. 587PABF900247TRA.ANT.UN.PIANTANE BRE BACK CROSSBAR CROISILLON ANTÉRIEUR VORDERER QUERTRÄGER MAGISTRA TAV. 588PABF900220SUP.CENTRALE PERNO RIB.BRG CENTRAL SUPPORT SUPPORT CENTRAL MITTLERE HALTERUNGMAGISTRA TAV. 588PABF900220SUP.CENTRALE PERNO RIB.BRG CENTRAL SUPPORT SUPPORT CENTRAL MITTLERE HALTERUNGMAGISTRA TAV. 589PABF800290SUP.MOTORE BRGA MOTOR SUPPORT SUPPORT MOTEUR HALTERUNGMAGISTRA TAV. 5810PABF900225PIANTANA ANT.DX BRG FRONT RIGHT SUPPORT COLONNE AVANT DROITE SÄULE VORNE RECHTSMAGISTRA TAV. 5810PABF900225PIANTANA ANT.DX BRG FRONT RIGHT SUPPORT COLONNE AVANT DROITE SÄULE VORNE RECHTSMAGISTRA TAV. 5811PABF900331PIANTANA POST.SX BRG REAR LEFT SUPPORT COLONNE ARRIÈRE GAUCHE SÄULE HINTEN LINKSMAGISTRA TAV. 5811PABF900331PIANTANA POST.SX BRG REAR LEFT SUPPORT COLONNE ARRIÈRE GAUCHE SÄULE HINTEN LINKSMAGISTRA TAV. 5816RTBF900101CERN.FISSA ANT.VASCA BRG ZINC.FIXED BASIN HINGE CHARNIÈRE FIXE CUVE FESTES WANNENSCHARNIER MAGISTRA TAV. 5816RTBF900101CERN.FISSA ANT.VASCA BRG ZINC.FIXED BASIN HINGE CHARNIÈRE FIXE CUVE FESTES WANNENSCHARNIER MAGISTRA TAV. 5817RTBF900099PERNO CERN.ANT.VASCA BRG HINGE PIN TOURILLON CHARNIÈRE SCHARNIERZAPFENMAGISTRA TAV. 5817RTBF900099PERNO CERN.ANT.VASCA BRG HINGE PIN TOURILLON CHARNIÈRE SCHARNIERZAPFENMAGISTRA TAV. 5818RTBF900100CERN.MOBILE ANT.VASCA BRG ZINC MOBIL BASIN HINGE CHARNIÈRE MOBILE CUVE BEWEGLICHES WANNENSCHARNIER MAGISTRA TAV. 5818RTBF900100CERN.MOBILE ANT.VASCA BRG ZINC MOBIL BASIN HINGE CHARNIÈRE MOBILE CUVE BEWEGLICHES WANNENSCHARNIER MAGISTRA TAV. 5819PABF800286FIANCO SX GBR LEFT SIDE CÔTÉ GAUCHE LINKE SEITEMAGISTRA TAV. 5819PABF800286FIANCO SX GBR LEFT SIDE CÔTÉ GAUCHE LINKE SEITEMAGISTRA TAV. 5820RTBF800300VASCA EBR TANK CUVE WANNEMAGISTRA TAV. 5820RTBF800300VASCA EBR TANK CUVE WANNEMAGISTRA TAV. 5821GABF800106AS.COPERCHIO GBR COVER COUVERCLE TOPFDECKELMAGISTRA TAV. 5821GABF800106AS.COPERCHIO GBR COVER COUVERCLE TOPFDECKELMAGISTRA TAV. 5822RTCP800031*MANIGLIA COP.G100COVER HANDLE POIGNÉE DU COUVERCLE DECHEKGRIFFMAGISTRA TAV. 5822RTCP800031*MANIGLIA COP.G100COVER HANDLE POIGNÉE DU COUVERCLE DECHEKGRIFFMAGISTRA TAV. PLETA INOX COP.GBR COVER HINGE CHARNIÈRE COUVERCLE ABDECKUNGSSCHARNIER MAGISTRA TAV. PLETA INOX COP.GBR COVER HINGE CHARNIÈRE COUVERCLE ABDECKUNGSSCHARNIER MAGISTRA TAV. 5824RTCP800030*TERMINALE DX CERN.COP.G100HINGE RIGHT TERMINAL TERMINAL DROITE CHARNIÉRE RECHTER ENDVERSCHLUßMAGISTRA TAV. 5824RTCP800030*TERMINALE DX CERN.COP.G100HINGE RIGHT TERMINAL TERMINAL DROITE CHARNIÉRE RECHTER ENDVERSCHLUßMAGISTRA TAV. 5826RTCP800028*REGOLAT.MOLLA CERN.COP.G100COVE SPRING ADJ. DEVICE REGULATEUR RESSORT COUVERCLE FEDERREGLER ABDECKUNG MAGISTRA TAV. 5826RTCP800028*REGOLAT.MOLLA CERN.COP.G100COVE SPRING ADJ. DEVICE REGULATEUR RESSORT COUVERCLE FEDERREGLER ABDECKUNG MAGISTRA TAV. 5827RTBF800103MOLLA CERNIERA COP.BRG/GBR SPRIENG FOR COVER HINGE RÉSSORT POUR CHARNIÉRE SCHARNIERFEDERMAGISTRA TAV. 5827RTBF800103MOLLA CERNIERA COP.BRG/GBR SPRIENG FOR COVER HINGE RÉSSORT POUR CHARNIÉRE SCHARNIERFEDERMAGISTRA TAV. 5828RTCP800027*GUIDA MOLLA CERN.COP.G100HINGE SPRING GUIDE GUIDE POUR RÉSSORT CHARNIÉRE COUVER TÜRFEDERFÜHRUNGTABLE POS.CODE ITALIAN ENGLISH FRANÇAIS DEUTSCH MAGISTRA TAV. 5828RTCP800027*GUIDA MOLLA CERN.COP.G100HINGE SPRING GUIDE GUIDE POUR RÉSSORT CHARNIÉRE COUVER TÜRFEDERFÜHRUNG MAGISTRA TAV. 5829GACU800014AS.GRIGLIA CAM.G4SF SMALT.CHIMNEY GRILL GRILLE DE LA CHEMINÉE SCHORNSTEINROST MAGISTRA TAV. 5829GACU800014AS.GRIGLIA CAM.G4SF SMALT.CHIMNEY GRILL GRILLE DE LA CHEMINÉE SCHORNSTEINROST MAGISTRA TAV. 5830GABF800111AS.CAMINETTO SUP.GBR SUPERIOR CHIMNEY CHEMINÉE SUPERIEURE OBERER SCHORNSTEIN MAGISTRA TAV. 5830GABF800111AS.CAMINETTO SUP.GBR SUPERIOR CHIMNEY CHEMINÉE SUPERIEURE OBERER SCHORNSTEIN MAGISTRA TAV. 5831PABF800280POSTERIORE INOX GBR STAINLESS STEEL BACK PANEL PANNEAU POSTÉRIEURE INOX INOX-RÜCKWANDMAGISTRA TAV. 5831PABF800280POSTERIORE INOX GBR STAINLESS STEEL BACK PANEL PANNEAU POSTÉRIEURE INOX INOX-RÜCKWANDMAGISTRA TAV. 5832PABF900243PI.INF.INOX BRE LOWER PLAN PLAN INFERIEUR UNTERE EBENEMAGISTRA TAV. 5832PABF900243PI.INF.INOX BRE LOWER PLAN PLAN INFERIEUR UNTERE EBENEMAGISTRA TAV. 5833GABF800107AS.CONTORNO R/OLIO GBR OIL COLLECTION EDGE CONTOURÖLSAMMELRANDMAGISTRA TAV. 5833GABF800107AS.CONTORNO R/OLIO GBR OIL COLLECTION EDGE CONTOURÖLSAMMELRANDMAGISTRA TAV. 5834GABF800112AS.TRA.POST.UN.PIANTANE GBR REAR CROSSBAR CROISILLON POSTERIEURE HINTERE QUERTRÄGER MAGISTRA TAV. 5834GABF800112AS.TRA.POST.UN.PIANTANE GBR REAR CROSSBAR CROISILLON POSTERIEURE HINTERE QUERTRÄGER MAGISTRA TAV. 5835PABF900227PIANTANA POST.DX BRG REAR RIGHT SUPPORT COLONNA ARRIÉRE DROITE SÄULE HINTEN RECHTS MAGISTRA TAV. 5835PABF900227PIANTANA POST.DX BRG REAR RIGHT SUPPORT COLONNA ARRIÉRE DROITE SÄULE HINTEN RECHTS MAGISTRA TAV. 5836RTMIN00123SEEGER ESTERNO E10.SEEGER Ø 10SEEGER Ø 10SEEGER Ø 10MAGISTRA TAV. 5836RTMIN00123SEEGER ESTERNO E10.SEEGER Ø 10SEEGER Ø 10SEEGER Ø 10TAV 57EBRTABLE POS.CODE ITALIAN ENGLISH FRANÇAIS DEUTSCH MAGISTRA TAV. 571RTBF900104SUP.OSCILL.FORI/16 BRG LEN206OSCILLATING SUPPORT SUPPORT OSCILLANT GELENKLAGERMAGISTRA TAV. 571RTBF900104SUP.OSCILL.FORI/16 BRG LEN206OSCILLATING SUPPORT SUPPORT OSCILLANT GELENKLAGERMAGISTRA TAV. 571RTBF900104SUP.OSCILL.FORI/16 BRG LEN206OSCILLATING SUPPORT SUPPORT OSCILLANT GELENKLAGERMAGISTRA TAV. 571RTBF900104SUP.OSCILL.FORI/16 BRG LEN206OSCILLATING SUPPORT SUPPORT OSCILLANT GELENKLAGERMAGISTRA TAV. 572RTBF900106RIBALTATORE VASCA BRG ZINC.TANK TILTING DEVICE BASCULEUR BAC WANNENDIPPVORRICHTUNG MAGISTRA TAV. 572RTBF900106RIBALTATORE VASCA BRG ZINC.TANK TILTING DEVICE BASCULEUR BAC WANNENDIPPVORRICHTUNG MAGISTRA TAV. 572RTBF900106RIBALTATORE VASCA BRG ZINC.TANK TILTING DEVICE BASCULEUR BAC WANNENDIPPVORRICHTUNG MAGISTRA TAV. 572RTBF900106RIBALTATORE VASCA BRG ZINC.TANK TILTING DEVICE BASCULEUR BAC WANNENDIPPVORRICHTUNG MAGISTRA TAV. 573RTBF900110PROLUNGA RIBALT.BRG FILTING DEVICE EXTENSION RALLONGE BASCULEUR KIPPVORRICHTUNGSVERLÄNGERUNG MAGISTRA TAV. 573RTBF900110PROLUNGA RIBALT.BRG FILTING DEVICE EXTENSION RALLONGE BASCULEUR KIPPVORRICHTUNGSVERLÄNGERUNG MAGISTRA TAV. 573RTBF900110PROLUNGA RIBALT.BRG FILTING DEVICE EXTENSION RALLONGE BASCULEUR KIPPVORRICHTUNGSVERLÄNGERUNG MAGISTRA TAV. 573RTBF900110PROLUNGA RIBALT.BRG FILTING DEVICE EXTENSION RALLONGE BASCULEUR KIPPVORRICHTUNGSVERLÄNGERUNG MAGISTRA TAV. 574RTBF900096PERNO FIS.PROLUNGA RIB.BRG FILTING DEVICE PLUG PRISE BASCULEUR KIPPVORRICHTUNGSSTIFT MAGISTRA TAV. 574RTBF900096PERNO FIS.PROLUNGA RIB.BRG FILTING DEVICE PLUG PRISE BASCULEUR KIPPVORRICHTUNGSSTIFT MAGISTRA TAV. 574RTBF900096PERNO FIS.PROLUNGA RIB.BRG FILTING DEVICE PLUG PRISE BASCULEUR KIPPVORRICHTUNGSSTIFT MAGISTRA TAV. 574RTBF900096PERNO FIS.PROLUNGA RIB.BRG FILTING DEVICE PLUG PRISE BASCULEUR KIPPVORRICHTUNGSSTIFT MAGISTRA TAV. 575RTMIN00123SEEGER ESTERNO E10.SEEGER Ø 10SEEGER Ø 10SEEGER Ø 10MAGISTRA TAV. 575RTMIN00123SEEGER ESTERNO E10.SEEGER Ø 10SEEGER Ø 10SEEGER Ø 10MAGISTRA TAV. 575RTMIN00123SEEGER ESTERNO E10.SEEGER Ø 10SEEGER Ø 10SEEGER Ø 10MAGISTRA TAV. 575RTMIN00123SEEGER ESTERNO E10.SEEGER Ø 10SEEGER Ø 10SEEGER Ø 10MAGISTRA TAV. 576RTBF900102PERNO FIS.RIDUTTORE BRG ZINC.REDUCTION ATTACHMENT PIN TOURILLON FIXATION RÉDUCTEUR KIPPVORRICHTUNGMAGISTRA TAV. 576RTBF900102PERNO FIS.RIDUTTORE BRG ZINC.REDUCTION ATTACHMENT PIN TOURILLON FIXATION RÉDUCTEUR KIPPVORRICHTUNGMAGISTRA TAV. 576RTBF900102PERNO FIS.RIDUTTORE BRG ZINC.REDUCTION ATTACHMENT PIN TOURILLON FIXATION RÉDUCTEUR KIPPVORRICHTUNGMAGISTRA TAV. 576RTBF900102PERNO FIS.RIDUTTORE BRG ZINC.REDUCTION ATTACHMENT PIN TOURILLON FIXATION RÉDUCTEUR KIPPVORRICHTUNGMAGISTRA TAV. 577RTBF900109RIDUTTORE BRG/GBR REDUCTION UNIT RÉDUCTEUR UNTERSETZUNGSGETRIEBE MAGISTRA TAV. 577RTBF900109RIDUTTORE BRG/GBR REDUCTION UNIT RÉDUCTEUR UNTERSETZUNGSGETRIEBE MAGISTRA TAV. 577RTBF900109RIDUTTORE BRG/GBR REDUCTION UNIT RÉDUCTEUR UNTERSETZUNGSGETRIEBE MAGISTRA TAV. 577RTBF900109RIDUTTORE BRG/GBR REDUCTION UNIT RÉDUCTEUR UNTERSETZUNGSGETRIEBE MAGISTRA TAV. 578RTMIN00226CHIAVETTA INC.BRG/8X7X40 ACC.KEY 8X7X40CLAVETTE 8X7X40FEDER 8X7X40MAGISTRA TAV. 578RTMIN00226CHIAVETTA INC.BRG/8X7X40 ACC.KEY 8X7X40CLAVETTE 8X7X40FEDER 8X7X40MAGISTRA TAV. 578RTMIN00226CHIAVETTA INC.BRG/8X7X40 ACC.KEY 8X7X40CLAVETTE 8X7X40FEDER 8X7X40MAGISTRA TAV. 578RTMIN00226CHIAVETTA INC.BRG/8X7X40 ACC.KEY 8X7X40CLAVETTE 8X7X40FEDER 8X7X40MAGISTRA TAV. 579RTBF800093VOLANTINO GBR HANDWAL VOLANT HANDWELMAGISTRA TAV. 579RTBF800093VOLANTINO GBR HANDWAL VOLANT HANDWELMAGISTRA TAV. 5710RTBF900105BUSSOLA PROL.VOLANT.BRG FLYIMPELLER EXTENSION BUSHING FOURREAU ROLLONGE VOLANT HANDRADVERLÄNGERUNGSBUCHSE MAGISTRA TAV. 5710RTBF900105BUSSOLA PROL.VOLANT.BRG FLYIMPELLER EXTENSION BUSHING FOURREAU ROLLONGE VOLANT HANDRADVERLÄNGERUNGSBUCHSE MAGISTRA TAV. 5711RTMIN00250CHIAVETTA INC.BRGA/6X6X39 ACC.KEY 6X6X39CLAVETTE 6X6X39FEDER 6X6X39MAGISTRA TAV. 5711RTMIN00250CHIAVETTA INC.BRGA/6X6X39 ACC.KEY 6X6X39CLAVETTE 6X6X39FEDER 6X6X39MAGISTRA TAV. 5712RTBF900124PULEGGIA RIDUTT.BRGA D210/TZ REDUCTION UNIT PULLEY POULIE RÉDUTEUR RIEMENSCHEIBEMAGISTRA TAV. 5712RTBF900124PULEGGIA RIDUTT.BRGA D210/TZ REDUCTION UNIT PULLEY POULIE RÉDUTEUR RIEMENSCHEIBEMAGISTRA TAV. 5713GABF900121MANIGLIA SOCCORSO BRGA ZINC.B.EMERGENCY HANDLE POIGNÉE DE SECOURS NOT-GRIFFMAGISTRA TAV. 5713GABF900121MANIGLIA SOCCORSO BRGA ZINC.B.EMERGENCY HANDLE POIGNÉE DE SECOURS NOT-GRIFFMAGISTRA TAV. 5714RTBF900125CINGHIA TRAPEZ.BRGA T.Z36X915VBELT COURROI TRAPÉZOIDALE KEILRIEMENMAGISTRA TAV. 5715RTMIN00251*CHIAVETTA INC.BRGA/5X5X25 ACC KEY 5X5X25CLAVETT 5X5X25FEDER 5X5X25TABLE POS.CODE ITALIAN ENGLISH FRANÇAIS DEUTSCHMAGISTRA TAV. 5715RTMIN00251*CHIAVETTA INC.BRGA/5X5X25 ACC KEY 5X5X25CLAVETT 5X5X25FEDER 5X5X25MAGISTRA TAV. 5716RTBF900123PULEGGIA MOTORE BRGA D50/TZ MOTOR PULLEY POULIE MOTEUR MOTOR-RIEMENSCHEIBEMAGISTRA TAV. 5716RTBF900123PULEGGIA MOTORE BRGA D50/TZ MOTOR PULLEY POULIE MOTEUR MOTOR-RIEMENSCHEIBEMAGISTRA TAV. 5717RTCU800156*CONDENS.MOT.450V/8MF MOTOR GUARD PROTECTION MOTEUR MOTORSCHUTZMAGISTRA TAV. 5717RTCU800156*CONDENS.MOT.450V/8MF MOTOR GUARD PROTECTION MOTEUR MOTORSCHUTZMAGISTRA TAV. 5718RTBF900122MOTORE+COND.SOLL.VASCA BRGA TANK TILTING MOTOR MOTEUR RELEVAGE BAC WANNENHEBEMOTORMAGISTRA TAV. 5718RTBF900122MOTORE+COND.SOLL.VASCA BRGA TANK TILTING MOTOR MOTEUR RELEVAGE BAC WANNENHEBEMOTORMAGISTRA TAV. 5719RTBF800123PULSANTE GBRA ZB2BA26PUSH BUTTON BOUTON DRUCKKNOPFMAGISTRA TAV. 5719RTBF800123PULSANTE GBRA ZB2BA26PUSH BUTTON BOUTON DRUCKKNOPFMAGISTRA TAV. 5720PABF900346SQ.FIS.PULSANTI BRGA BRACKET FOR PUSH BOTTON EGUERRE FIXATION BOUTONS WINKELEISENMAGISTRA TAV. 5720PABF900346SQ.FIS.PULSANTI BRGA BRACKET FOR PUSH BOTTON EGUERRE FIXATION BOUTONS WINKELEISENMAGISTRA TAV. 5721RTBF800125CONTATTI PULS.GBRA ZB2BZ105PUSH BUTTON CONTACT CONTACTS BOUTONS DRUCKKNOPFKONTAKTEMAGISTRA TAV. 5721RTBF800125CONTATTI PULS.GBRA ZB2BZ105PUSH BUTTON CONTACT CONTACTS BOUTONS DRUCKKNOPFKONTAKTEMAGISTRA TAV. 5722PABF900347PROTEZ.PULSANTI BRGA PUSHBOTTON GUARD PROTECTION BOUTONS POUSSOIRS SCHUTZVORRICHTUNGMAGISTRA TAV. 5722PABF900347PROTEZ.PULSANTI BRGA PUSHBOTTON GUARD PROTECTION BOUTONS POUSSOIRS SCHUTZVORRICHTUNGMAGISTRA TAV. 5723PABF900353FLANGIA FIS.PUL.RIDUTTORE BRGA PULLEY ATTACHMENT FLANGE BRIDE FIXATION POULIE BEFESTIGUNGSFLANSCH FÜR RIEMENSCHEIBE MAGISTRA TAV. 5723PABF900353FLANGIA FIS.PUL.RIDUTTORE BRGA PULLEY ATTACHMENT FLANGE BRIDE FIXATION POULIE BEFESTIGUNGSFLANSCH FÜR RIEMENSCHEIBETAV 59EBRTABLE POS.CODE ITALIAN ENGLISH FRANÇAIS DEUTSCHMAGISTRA TAV. 591RTCP800018RUB.ACQ.G100 17CR905M WATER TAP ROBINET DE L'EAU WASSERHAHNMAGISTRA TAV. 591RTCP800018RUB.ACQ.G100 17CR905M WATER TAP ROBINET DE L'EAU WASSERHAHNMAGISTRA TAV. 592RTBF800126NIPLES COMP.CIL/F/D10 01141021NIPLES FOR PIPE Ø 10NIPLES POUR TUYAU Ø 10NIPPEL FÜR SCHLAUCH Ø 10MAGISTRA TAV. 592RTBF800126NIPLES COMP.CIL/F/D10 01141021NIPLES FOR PIPE Ø 10NIPLES POUR TUYAU Ø 10NIPPEL FÜR SCHLAUCH Ø 10MAGISTRA TAV. 593PABF900131SQ.FIS.RESIST.FT2E ELEMENT FIXING BRACKET EGUERRE DE FIXAGE POUR RÉSISTANCE WIDERSTANDSBEFESTIGUNGSWINKEL MAGISTRA TAV. 593PABF900131SQ.FIS.RESIST.FT2E ELEMENT FIXING BRACKET EGUERRE DE FIXAGE POUR RÉSISTANCE WIDERSTANDSBEFESTIGUNGSWINKEL MAGISTRA TAV. 594PABF900202TU.AL.EROG.ACQ.V.BRG TANK FILLING PIPE TUYAU REMPLISSAGE BAC WANNENFÜLLROHRMAGISTRA TAV. 594PABF900202TU.AL.EROG.ACQ.V.BRG TANK FILLING PIPE TUYAU REMPLISSAGE BAC WANNENFÜLLROHRMAGISTRA TAV. 595PABF800292TU.AL.RUB.ACQ.GBR WATER FEEDING PIPE TUYAU DISTRIBUTION EAU HAHNVERSORGUNGSROHRMAGISTRA TAV. 595PABF800292TU.AL.RUB.ACQ.GBR WATER FEEDING PIPE TUYAU DISTRIBUTION EAU HAHNVERSORGUNGSROHRMAGISTRA TAV. 596GABF800035AS.ATT.ACQUA GBM90/GBR WATER CONNECTION ATTAQUE DE L'EAU WASSERANSCHLUSSMAGISTRA TAV. 596GABF800035AS.ATT.ACQUA GBM90/GBR WATER CONNECTION ATTAQUE DE L'EAU WASSERANSCHLUSSMAGISTRA TAV. 597RTCU900012BICONO D.10DOUBLE CONE D.10BICONE D.10DOPPELKONUS D.10MAGISTRA TAV. 597RTCU900012BICONO D.10DOUBLE CONE D.10BICONE D.10DOPPELKONUS D.10MAGISTRA TAV. 598RTCU900013CALOTTA D.10NUT ECROU MUTTERMAGISTRA TAV. 598RTCU900013CALOTTA D.10NUT ECROU MUTTERMAGISTRA TAV. 599RTBF800041EROGATORE ACQ.GC45 3/8"C44MB09WATER DISTRIBUTOR DISTRIBUTION POUR L'EAU WASSERVERSORGERMAGISTRA TAV. 599RTBF800041EROGATORE ACQ.GC45 3/8"C44MB09WATER DISTRIBUTOR DISTRIBUTION POUR L'EAU WASSERVERSORGERMAGISTRA TAV. 5910RTBF800026R.BRE 1.5KW230OVER HEATING ELECT. 1500W 240V.RÉSISTNCE ELECTRIQUE 1500W 240V.ELEKT. WIDERSTÄNDE 1500W 240V. MAGISTRA TAV. 5910RTBF800026R.BRE 1.5KW230OVER HEATING ELECT. 1500W 240V.RÉSISTNCE ELECTRIQUE 1500W 240V.ELEKT. WIDERSTÄNDE 1500W 240V. MAGISTRA TAV. 5911PABF900246CONT.INT.IS.RES.BRE EL. RESISTOR INSULATING CONTAINER BOÎTIER ISOLANT RÉSISTANCES EL.ISOLIERMITTELBEHÄLTER EL. WIDERSTÄNDE MAGISTRA TAV. 5911PABF900246CONT.INT.IS.RES.BRE EL. RESISTOR INSULATING CONTAINER BOÎTIER ISOLANT RÉSISTANCES EL.ISOLIERMITTELBEHÄLTER EL. WIDERSTÄNDE MAGISTRA TAV. 5912MPIS000003IS.INSULFRAX/1,26X1,10X9SP WATER FEEDING PIPE TUYAU DISTRIBUTION EAU HAHNVERSORGUNGSROHRMAGISTRA TAV. 5912MPIS000003IS.INSULFRAX/1,26X1,10X9SP WATER FEEDING PIPE TUYAU DISTRIBUTION EAU HAHNVERSORGUNGSROHRMAGISTRA TAV. 5913PABF900244CONT.EST.IS.RES.BRE EXTERIOR CONTAINER FOR INSULATION BOÎTIER EXTERNE POUR ISOLANT EXTERNER ISOLIERMITTELBEHÄLTER MAGISTRA TAV. 5913PABF900244CONT.EST.IS.RES.BRE EXTERIOR CONTAINER FOR INSULATION BOÎTIER EXTERNE POUR ISOLANT EXTERNER ISOLIERMITTELBEHÄLTER MAGISTRA TAV. 5914PABF900248PIASTRINA FORO CONT.EST.IS.BRE HOLE COVER PLATE PLAQUETTE BOUCHE-TROU LOCHABDECKUNGMAGISTRA TAV. 5914PABF900248PIASTRINA FORO CONT.EST.IS.BRE HOLE COVER PLATE PLAQUETTE BOUCHE-TROU LOCHABDECKUNGMAGISTRA TAV. 5915PABF900245PROTEZ.MORS.RES.BRE EL. RESISTOR TERMINAL STRIP GNARD PROTECTION BORNIER RÉSISTANCES SCHUTZVORRICHTUNG KLEMMBRETTER MAGISTRA TAV. 5915PABF900245PROTEZ.MORS.RES.BRE EL. RESISTOR TERMINAL STRIP GNARD PROTECTION BORNIER RÉSISTANCES SCHUTZVORRICHTUNG KLEMMBRETTER MAGISTRA TAV. 5916PABF900230SCATOLA P/COMANDI BRG CONTROL BOX BOÎTER PORTE-COMMANDES STEUERUNGSKASTENMAGISTRA TAV. 5916PABF900230SCATOLA P/COMANDI BRG CONTROL BOX BOÎTER PORTE-COMMANDES STEUERUNGSKASTENMAGISTRA TAV. 5917PABF900045*PIANTANA SX FACC.BM4G WATER FEEDING PIPE TUYAU DISTRIBUTION EAU HAHNVERSORGUNGSROHRMAGISTRA TAV. 5917PABF900045*PIANTANA SX FACC.BM4G WATER FEEDING PIPE TUYAU DISTRIBUTION EAU HAHNVERSORGUNGSROHRMAGISTRA TAV. 5918GABF900117AS.COPERCHIO SCAT.P/COM.BRG BOX COVER COUVERCLE BOÎTER KASTENDECKELMAGISTRA TAV. 5918GABF900117AS.COPERCHIO SCAT.P/COM.BRG BOX COVER COUVERCLE BOÎTER KASTENDECKELMAGISTRA TAV. 5919RTCU700212COMM.BM2E 4922015705 C COMMUTATOR COMMUTATEUR KOMMUTATORMAGISTRA TAV. 5919RTCU700212COMM.BM2E 4922015705 C COMMUTATOR COMMUTATEUR KOMMUTATORMAGISTRA TAV. 5920RTCU900290LAMP.SP.VERDE/250V/TBF013.SF6GREEN WARNING LAMP LAMPE TEMOIN VERTE GRÜNE KONTROLLEUCHTEMAGISTRA TAV. 5920RTCU900290LAMP.SP.VERDE/250V/TBF013.SF6GREEN WARNING LAMP LAMPE TEMOIN VERTE GRÜNE KONTROLLEUCHTEMAGISTRA TAV. .EF90 0+1 NERO COMMUTATOR KNOB BOUTON DU COMMUTATEUR KOMMUTATORKUGELGRIFFMAGISTRA TAV. .EF90 0+1 NERO COMMUTATOR KNOB BOUTON DU COMMUTATEUR KOMMUTATORKUGELGRIFFMAGISTRA TAV. 5922RTCU900072LAMP.SP.GIALLA/250V/TBF013.SF6YELLOW WARNING LAMP LAMPE TÉMOIN JAUNE GELBE KONTROLLEUCHTEMAGISTRA TAV. 5923RTCU700085T.E.C4EF70 5519062802THERMOSTAT THERMOSTAT THERMOSTATTABLE POS.CODE ITALIAN ENGLISH FRANÇAIS DEUTSCH MAGISTRA TAV. 5923RTCU700085T.E.C4EF70 5519062802THERMOSTAT THERMOSTAT THERMOSTATMAGISTRA TAV. 5924RTBF800085MANOP.TERM.E.GBR 0+8 ROSSO THERMOSTAT KNOB BOUTON DU THERMOSTAT THERMOSTATKUGELGRIFF MAGISTRA TAV. 5924RTBF800085MANOP.TERM.E.GBR 0+8 ROSSO THERMOSTAT KNOB BOUTON DU THERMOSTAT THERMOSTATKUGELGRIFF MAGISTRA TAV. 5925RTBF800192T.L.EBR/T420 5532582804RELAY RELAIS RELAISMAGISTRA TAV. 5925RTBF800192T.L.EBR/T420 5532582804RELAY RELAIS RELAISMAGISTRA TAV. 5926RTBF800153*RELAIS EBR SN20CXAC230V1A1B RELAY RELAIS RELAISMAGISTRA TAV. 5926RTBF800153*RELAIS EBR SN20CXAC230V1A1B RELAY RELAIS RELAISMAGISTRA TAV. 5927RTBF800149*MORSETTIERA EBR+SIMB/1-12 C TERMINAL BLOC 12 POLE GROUPE DE CONNECTION DE CABLES KLEMMENBREIT 12 POLIG MAGISTRA TAV. 5927RTBF800149*MORSETTIERA EBR+SIMB/1-12 C TERMINAL BLOC 12 POLE GROUPE DE CONNECTION DE CABLES KLEMMENBREIT 12 POLIG MAGISTRA TAV. 5928RTBF800138F/CAVOPG21 53015050+D5*******C CABLE CLAMB Ø 9FIXE-CABLE Ø 9KABELHALTER Ø 9 MAGISTRA TAV. 5928RTBF800138F/CAVOPG21 53015050+D5*******C CABLE CLAMB Ø 9FIXE-CABLE Ø 9KABELHALTER Ø 9 MAGISTRA TAV. 5929RTCU700102PASSACAVO D9+DADO GEW52002CABLE-GUIDE Ø 9PASSE-CABLE Ø 9KABELRINNE Ø 9MAGISTRA TAV. 5929RTCU700102PASSACAVO D9+DADO GEW52002CABLE-GUIDE Ø 9PASSE-CABLE Ø 9KABELRINNE Ø 9MAGISTRA TAV. 5930RTCU700103PASSACAVO PG21+DADO GW52006CABLE GUIDE PASSE-CABLE KABELRINNEMAGISTRA TAV. 5930RTCU700103PASSACAVO PG21+DADO GW52006CABLE GUIDE PASSE-CABLE KABELRINNEMAGISTRA TAV. 5931RTBF800113MICROINT.SOLL.VASCA GBR C7DZN MICROSWITCH MICRO-INTERRUPTEUR MIKRO SCHALTER MAGISTRA TAV. 5931RTBF800113MICROINT.SOLL.VASCA GBR C7DZN MICROSWITCH MICRO-INTERRUPTEUR MIKRO SCHALTER。
传声器盘点
传声器盘点--------------------------------------------------------------------------------时间：2004-2-20 14:24:05 来源：依马狮网作者：Stephen Murrhy 阅读472次西半球的夜总会、摄影棚、排练房、剧院、会堂或体育场如果某个晚上不用Shure SM 58传声器似乎是不可想象的。
SM 58推出已近40个年头，无疑是实况声音历史上卖得最好的通用传声器。
此结实可靠的耐用设备连同SM 57，在新世纪同样有不俗的表现。
评价销路畅旺的传声器产品，要为58型传声器及其它数百种特定用途和质量的传声器留下许多笔墨。
选择传声器往往是工程师创造性的一种延伸，可随着音乐的品味变化而变化。
由于不可缺少的SM57和58使用在持续，因此，每年发布的值得注意的新型传声器型号也层出不穷。
本文我们介绍一些最新、最受欢迎的实况录音传声器。
值得注意的新型传声器AKG生产传声器已有50多年的历史，曾开拓性地生产了一些最受欢迎和令人垂涎欲滴的传声器。
今年年初，AKG推出了若干模块式实况传声器，它们是Emotion/Tri-Power系列产品的一部分。
动圈式D 3700以AKG的Varimotion振膜（首种厚度可变振膜）为特色，重新设计的心形极化图更易操纵，并有更高的反馈前增益。
C 900电容式传声器的设计宗旨是实现高质量实况放音，现在与AKG的新型模块式系统合作后得到了改进。
该高性能的传声器具有一个镀金的碳精盒以及一个供应的可用按扣装上的逼真度提升适配器。
受欢迎的D 880动圈传声器也经过改进以在此模块式系统中工作。
应用这全部3种传声器，TM 40发射模块可容易地代替XLR连接模块，用于AKG WMS 40无线系统。
还有一种带一个开关的XLR模块。
铁三角（Audio-Technica）受欢迎的Aritst Elite系列产品不断丰富，最近增加了若干新产品。
SMAJ5.0A-TR中文资料
SMAJ5.0A-TR,CA-TR SMAJ188A-TR,CA-TRTRANSIL TM®PEAK PULSE POWER : 400 W (10/1000µs)STAND OFF VOLTAGE RANGE :From 5V to 188V.UNI AND BIDIRECTIONAL TYPES LOW CLAMPING FACTOR FAST RESPONSE TIMEJEDEC REGISTERED PACKAGE OUTLINE FEATURESSMA(JEDEC D0214 AC)Symbol ParameterValue Unit P PP Peak pulse power dissipation (see note 1)Tj initial = T amb 400W P Power dissipation on infinite heatsink T amb = 50°C 3.3W I FSM Non repetitive surge peak forward current for unidirectional types tp = 10msTj initial = T amb40A T stg T j Storage temperature range Maximum junction temperature- 65 to + 175150°C °C T LMaximum lead temperature for soldering during 10 s.260°CNote 1 : For a surge greater than the maximum values, the diode will fail in short-circuit.ABSOLUTE MAXIMUM RATINGS (T amb = 25°C)DESCRIPTIONThe SMAJ series are TRANSIL TM diodes designed specifically for protecting sensitive equipment against transient overvoltages. The SMA package allows save spacing on high density printed circuit boards.Transil diodes provide high overvoltage protection by clamping action. Their instantaneous response to transient overvoltages makes them particularly suited to protect voltage sensitive devices such as MOS Technology and low voltage supplied IC’s.September 1998 Ed: 5A Symbol ParameterValue Unit R th (j-l)Junction to leads30°C/W R th (j-a)Junction to ambient on printed circuit on recommended pad layout120°C/WTHERMAL RESISTANCES 1/5II F V F V CLV BRV RMI PPI RMVSymbol ParameterV RM Stand-off voltage V BR Breakdown voltage V CL Clamping voltage I RM Leakage current @ V RM I PPPeak pulse currentαTVoltage temperature coefficient V FForward voltage dropELECTRICAL CHARACTERISTICS (T amb = 25°C)TypesI RM @ V RM V BR @ I R V CL @ I PP V CL @ I PP αT C maxmin maxmaxmaxtyp note210/1000µs 8/20µs note3note4Unidirectional Mark.Bidirectional Mark. µA V V mA V A V A 10-4/°C pF SMAJ5.0A-TR AE SMAJ5.0CA-TR AA 800 5.0 6.4109.243.513.4174 5.73500SMAJ6.0A-TR DUB SMAJ6.0CA-TR DBB 800 6.0 6.71010.338.813.7170 5.93300SMAJ6.5A-TR DUC SMAJ6.5CA-TR DBC 500 6.57.21011.235.714.5160 6.13100SMAJ8.5A-TR DUH SMAJ8.5CA-TR DBH 108.59.44114.427.718.61247.32000SMAJ10A-TR AX SMAJ10CA-TR AC 51011.111723.521.71067.81550SMAJ12A-TR DUK SMAJ12CA-TR DBK 51213.3119.920.125.3918.31325SMAJ13A-TR BG SMAJ13CA-TR BH 11314.4121.518.627.2858.41200SMAJ15A-TR BM SMAJ15CA-TR AJ 11516.7124.416.432.5718.8975SMAJ18A-TR DUQ SMAJ18CA-TR DBQ 11820129.213.739.3599.2800SMAJ20A-TR DUR SMAJ20CA-TR DBR 12022.2132.412.342.8549.4725SMAJ22A-TR DUS SMAJ22CA-TR DBS 12224.4135.511.248.3489.6625SMAJ24A-TR DUT SMAJ24CA-TR DBT 12426.7138.910.350469.6600SMAJ26A-TR DUU SMAJ26CA-TR DBU 12628.9142.19.553.5439.7575SMAJ28A-TR CG SMAJ28CA-TR CH 12831.1145.48.859399.8510SMAJ30A-TR CK SMAJ30CA-TR CL 13033.3148.48.364.3369.9480SMAJ33A-TR CM SMAJ33CA-TR CN 13336.7153.37.569.73310.0450SMAJ40A-TR DUZ SMAJ40CA-TR DBZ 14044.4164.5 6.2842710.1370SMAJ43A-TR EUA SMAJ43CA-TR EBA 14347.8169.4 5.7912510.2350SMAJ48A-TR CX SMAJ48CA-TR CY 14853.3177.4 5.21002310.3320SMAJ58A-TR EUF SMAJ58CA-TR EBF 15864.4193.6 4.31211910.4270SMAJ70A-TR EUI SMAJ70CA-TR EBI 17077.81113 3.51461610.5230SMAJ85A-TR EUL SMAJ85CA-TR EBL 18594.41137 2.91781310.6200SMAJ100A-TR EUN SMAJ100CA-TR EBN 11001111162 2.52121110.7170SMAJ130A-TR EUQ SMAJ130CA-TR EBQ 11301441209 1.9265910.8145SMAJ154A-TR EUT SMAJ154CA-TR EBT 11541711246 1.6317710.8125SMAJ170A-TR SR SMAJ170CA-TR SS 11701891275 1.4353 6.510.8120SMAJ188A-TREUV SMAJ188CA-TR EBV 11882091328 1.4388610.8110Note 2 :Pulse test : t p < 50 ms.Note 3 :∆V BR = αT * (T amb - 25) * V BR (25°C).Note 4 :V R = 0 V, F = 1 MHz. For bidirectional types,capacitance value is divided by 2.10s1000s%I PP 50tPULSE WAVEFORM 10/1000s100SMAJxxxA-TR, CA-TR2/52550751001251501750.00.10.20.30.40.50.60.70.80.91.01.1Ppp[Tj initial]/Ppp[Tj initial=25°C]Tj initial(°C)Fig 1: Peak power dissipation versus initial junction temperature.0.010.101.0010.0010010005000Ppp(W)tp(ms)Fig 2: Peak pulse power versus exponential pulse duration (Tj initial=25°C).1101005000.11.010.0100.0200.0Ipp(A)tp=20µstp=1ms SMAJ5.0A,CASMAJ188A,CASMAJ58A,CASMAJ26A,CASMAJ13A,CAV (V)CL Fig 3: Clamping voltage versus peak pulse current (Tj initial=25°C)Exponential waveform tp=20µs & tp=1ms.1101002001010010005000C(pF)F=1MHzSMAJ5.0ASMAJ188ASMAJ58ASMAJ26A SMAJ13A V (V)R Fig 4-1: Capacitance versus reverse applied voltage (typical values) (SMAJxxA).11010020011010010002000F=1MHzSMAJ5.0CA SMAJ188CASMAJ58CA SMAJ26CA SMAJ13CAC(pF)V (V)R Fig 4-2: Capacitance versus reverse applied voltage (typical values) (SMAJxxCA).SMAJxxxA-TR, CA-TR3/50.40.50.60.70.80.9 1.0 1.1 1.2 1.3 1.40.010.101.0010.00I (A)FM Tj=25°CTj=125°CV (V)FM Fig 5: Peak forward voltage drop versus peak forward current (typical values).1E-21E-11E+01E+11E+25E+20.010.101.00Zth(j-a)/Rth(j-a)tp(s)Fig 6: Relative variation of thermal impedance junction to ambient versus pulse duration.12345405060708090100110120130140Rth(j-a) (°C/W)S(Cu)(cm²)Fig 7: Thermal resistance junction to ambient versus copper surface under each lead (printed circuit board FR4 e(Cu)=35µm).2550751001251501E-11E+01E+11E+21E+32E+3I [Tj] / I [Tj=25°C]R R V < 8.5VBR Tj(°C)V 8.5VBR ≥Fig 8: Relative variation of leakage current versus junction temperature.SMAJxxxA-TR, CA-TR4/5REF.DIMENSIONSMillimeters Inches Min.Max.Min.Max.A11.902.700.0750.106A20.050.200.0020.008b1.25 1.650.0490.065c 0.150.410.0060.016E4.805.600.1890.220E13.954.600.1560.181D 2.25 2.950.0890.116L0.751.600.0300.063Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics.Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied.STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.The ST logo is a registered trademark of STMicroelectronics © 1998 STMicroelectronics - Printed in Italy - All rights reserved.STMicroelectronics GROUP OF COMPANIESAustralia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco -The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A.Packaging : standard packaging is in tape and reel.PACKAGE MECHANICAL DATA SMA (Plastic)ECLE1DA1A2bMARKING : Logo, Date Code, Type Code, Cathode Band (for unidirectional types only).FOOTPRINT DIMENSIONS (Millimeter)SMA Plastic.2.40 1.651.45 1.45Weight = 0.068 gORDER CODESM A J 85 C A - TRBIDIRECTIONALNo suffix : UnidirectionalSURFACE MOUNTSTAND OFF VOLTAGE400 WATTSTAPE & REEL SMAJxxxA-TR, CA-TR5/5。
SMAJ50中文资料
FeaturesMechanical Data· Plastic package has Underwriters Laboratoryflammability classification 94V-0· Optimized for LAN protection applications· Ideal for ESD protection of data lines in accordance with IEC 1000-4-2 (IEC801-2)· Ideal for EFT protection of data lines in accordance with IEC 1000-4-4 (IEC801-4)· Low profile package with built-in strain relief for surface mounted applications · Glass passivated junction· Low incremental surge resistance, excellent clamping capability· 400W peak pulse power capability with a 10/1000¥ìSwaveform, repetition rate(duty cycle) : 0.01% (300W above 78V)· Very fast response time· High temperature soldering guaranteed : 250¡É/10 seconds at terminalsDevices For Bidirectional ApplicationsMaximum Ratings And Electrical Characteristics· For bi-directional devices, use suffix C or CA (e.g. SMAJ10C, SMAJ10CA). Electrical characteristics apply in both directions.· Case : JEDEC DO-214AC(SMA) molded plastic over passivated chip· Terminals : Solder plated , solderable per MIL-STD-750, method 2026· Polarity : For uni-directional types the band denotesthe cathode, which is positive with respect to the anode under normal TVS operation· Mounting Position : Any· Weight : 0.002 ounce, 0.064 gramPeak pulse power dissipation with a 10/1000¥ìS waveform (Note 1,2. Fig. 1)Peak pulse current with a waveform (Note 1)Typical thermal resistance, junction to lead Typical thermal resistance, junction to ambient (Note 3)Peak forward surge current, 8.3mm single half sine-wave unidirectional only (Note 2)Operating junction and storage temperature rangeP PPM 400Watts SymbolsValuesUnits30I PPM See next tableAmps 40I FSMT J ,T STG120-55 to +150¡É¡É/W ¡É/W Amps (Ratings at 25¡É ambient temperature unless otherwise specified)Notes:(1) Non repetitive current pulse, per Fig.3 and derated above T A =25¡É per Fig.2 Rating is 300W above 78V(2) Mounted on 0.2¡¿0.2"(5.0¡¿5.0mm) copper pads to each terminal (3) Mounted on minimum recommended pad layoutDimensions in inches and (millimeters)DO-214AC (SMA)R¥èJA R¥èJLRatings at 25¡É ambient temperature unless otherwise specified. VF=3.5V at IF=25A (uni-directional only)DeviceBreakdown VoltageMaximum Maximum MaximumDevice Type Marking V (BR)at I T (1)Test Stand-off Reverse Leakage Peak Pulse Surge ClampingCode (V)Current Voltage at V WM Current I PPM Voltage at I PPM UNI BI Max Min I T (mA)V WM (V)I D ( ¥ìA )(3)(A)(2)V C (V)S MAJ 5.0(C )AD WD 6.407.827.0710 5.080041.79.6S MAJ 5.0(C )A (5)AE WE 6.4010 5.080043.59.2S MAJ 6.0(C )AF WF 6.678.157.3710 6.080035.111.4S MA J 6.0(C )A AG WG 6.6710 6.080038.810.3S MAJ 6.5(C )AH WH 7.227.228.8210 6.550032.512.3S MA J 6.5(C )A AK WK 7.9810 6.550035.711.2S MAJ 7.0(C )AL WL 7.789.518.60107.020030.113.3S MA J7.0(C )A AM WM 7.78107.020033.312.0S MAJ 7.5(C )AN WN 8.3310.29.21 1.07.510028.014.3S MA J 7.5(C )A AP WP 8.331.07.510031.012.9S MAJ 8.0(C )AQ WQ 8.8910.99.83 1.08.05026.715.0S MA J 8.0(C )A AR WR 8.891.08.05029.413.6S MAJ 8.5(C )AS WS 9.4411.510.4 1.08.51025.215.9S MA J8.5(C )A AT WT 9.441.08.51027.814.4S MAJ 9.0(C )AU WU 10.012.211.1 1.09.0 5.023.716.9S MA J 9.0(C )A AV WV 10.0 1.09.0 5.026.015.4S MAJ 10(C )AW WW 11.113.612.3 1.010 1.021.318.8S MA J 10(C )A AX WX 11.1 1.010 1.023.517.0S MAJ 11(C )AY WY 12.214.913.5 1.011 1.019.920.1S MA J11(C )A AZ WZ 12.21.011 1.022.018.2S MAJ 12(C )B D XD 13.316.314.7 1.012 1.018.222.0S MA J 12(C )A B E XE 13.31.012 1.020.119.9S MAJ 13(C )B F XF 14.417.615.9 1.013 1.016.823.8S MA J 13(C )A B G XG 14.41.013 1.018.621.5S MAJ 14(C )B H XH 15.619.117.2 1.014 1.015.525.8S MA J14(C )A B K XK 15.61.014 1.017.223.2S MAJ 15(C )B L XL 16.720.418.5 1.015 1.014.926.9S MA J 15(C )A B M XM 16.71.015 1.016.424.4S MAJ 16(C )B N XN 17.821.819.7 1.016 1.013.928.8S MA J 16(C )A B P XP 17.81.016 1.015.426.0S MAJ 17(C )B Q XQ 18.923.120.9 1.017 1.013.130.5S MA J17(C )A B R XR 18.91.017 1.014.527.6S MAJ 18(C )B S XS 20.024.422.1 1.018 1.012.432.2S MA J18(C )A B T XT 20.01.018 1.013.729.2S MAJ 20(C )BU XU 22.227.124.5 1.020 1.011.235.8S MA J20(C )A B V XV 22.21.020 1.012.332.4S MAJ 22(C )B W XW 24.429.826.9 1.022 1.010.239.4S MA 22(C )A B X XX 24.41.022 1.011.335.5S MAJ 24(C )B Y XY 26.732.629.5 1.024 1.09.343.0S MA 24(C )A B Z XZ 26.71.024 1.010.338.9S MAJ 26(C )C D Y D 28.935.331.9 1.026 1.08.646.6S MA 26(C )A C E Y E 28.91.026 1.09.542.1S MAJ 28(C )C F Y F 31.138.034.4 1.028 1.08.050.0S MA 28(C )A C G Y G 31.11.028 1.08.845.4S MAJ 30(C )C H Y H 33.340.736.8 1.030 1.07.553.5S MA 30(C )AC K Y K33.31.0301.08.348.4Notes :(1) P ulse test:t p=50ms (2) S urge current waveform per F ig.3 and derate per F ig.2(3) For bi-directional types having V WM of 10 Volts and less, the I D limit is doubled (4) All terms and symbols are consistent with ANS I/IE E E C 62.35(5) For the bidirectional S MAJ 5.0C A, the maximum V (B R )is 7.25V.Ratings at 25¡É ambient temperature unless otherwise specified. VF=3.5V at IF=25A (uni-directional only)DeviceBreakdown VoltageMaximum Maximum MaximumDevice Type Marking V (BR)at I T (1)Test Stand-off Reverse Leakage Peak Pulse Surge ClampingCode (V)Current Voltage at V WM Current I PPM Voltage at I PPM UNI BI Max Min I T (mA)V WM (V)I D ( ¥ìA)(3)(A)(2)V C (V)S MAJ 33(C )C L Y L 36.744.940.6 1.033 1.0 6.859.0S MA J33(C )A C M Y M 36.71.033 1.07.553.3S MAJ 36(C )C N Y N 40.048.9 1.036 1.0 6.264.3S MA J36(C )A C P Y P 40.0 1.036 1.0 6.958.1S MAJ 40(C )C Q Y Q 44.454.344.2 1.040 1.0 5.671.4S MA J 40(C )A C R Y R 44.41.040 1.0 6.264.5S MAJ 43(C )C S Y S 47.858.449.1 1.043 1.0 5.276.7S MA J43(C )A C T Y T 47.81.043 1.0 5.869.4S MAJ 45(C )C U Y U 50.061.152.8 1.045 1.0 5.080.3S MA J45(C )A C V Y V 50.0 1.045 1.0 5.572.7S MAJ 48(C )C W Y W 53.365.155.3 1.048 1.0 4.785.5S MA J 48(C )A C X Y X 53.3 1.048 1.0 5.277.4S MAJ 51(C )C Y Y Y 56.769.358.9 1.051 1.0 4.491.1S MA J51(C )A C Z Y Z 56.7 1.051 1.0 4.982.4S MAJ 54(C )R D ZD 60.073.362.7 1.054 1.0 4.296.3S MA J54(C )A R E ZE 60.01.054 1.0 4.687.1S MAJ 58(C )R F ZF 64.478.766.3 1.058 1.0 3.9103S MA J 58(C )A R G ZG 64.4 1.058 1.0 4.393.6S MAJ 60(C )R H ZH 66.781.571.2 1.060 1.0 3.7107S MA J60(C )A R K ZK 66.71.060 1.0 4.196.8S MAJ 64(C )R L ZL 71.186.973.7 1.064 1.0 3.5114S MA J64(C )A R M ZM 71.1 1.064 1.0 3.9103S MAJ 70(C )R N ZN 77.895.186.092.195.878.6 1.070 1.0 3.2125S MA J 70(C )A R P ZP 77.81.070 1.0 3.5113S MAJ 75(C )R Q ZQ 83.3102 1.075 1.0 3.0134S MA J75(C )A R R ZR 83.3 1.075 1.0 3.3121S MAJ 78(C )R S ZS 86.7106 1.078 1.0 2.9139S MA J78(C )A R T ZT 86.7 1.078 1.0 3.2126S MAJ 85(C )R U ZU 94.4115104 1.085 1.0 2.0151S MA J 85(C )A R V ZV 94.41.085 1.02.2137S MAJ 90(C )R W ZW 100122111 1.090 1.0 1.9160S MA J 90(C )A R X ZX 1001.090 1.02.1146S MAJ 100(C )R Y ZY 111136123 1.0100 1.0 1.7179S MA J100(C )A R Z ZZ 1111.0100 1.0 1.9162S MAJ 110(C )VD VD 122149135 1.0110 1.0 1.5196S MA J110(C )A S E VE 1221.0110 1.0 1.7177S MAJ 120(C )S F VF 133163147 1.0120 1.0 1.4214S MA 120(C )A VG VG 1331.0120 1.0 1.6193S MAJ 130(C )S H VH 144176159 1.0130 1.0 1.3231S MA 130(C )A VK VK 1441.0130 1.0 1.4209S MAJ 150(C )S L VL 167204185 1.0150 1.0 1.1268S MA 150(C )A VM VM 1671.0150 1.0 1.2243S MAJ 160(C )S N VN 178218197 1.0160 1.0 1.0287S MA 160(C )A S P VP 1781.0160 1.0 1.2259S MAJ 170(C )S Q VQ 189231209 1.0170 1.00.99304S MA 170(C )A S R VR 1891.0170 1.0 1.09275S MAJ 188(C )S T VT 209255 1.0188 1.00.9344S MAJ 188(C )AS S VS2092311.01881.00.91328Notes :(1) P ulse test:t p =50ms(2) S urge current waveform per F ig.3 and derate per F ig.2(3) For bi-directional types having V WM of 10 Volts and less, the I D limit is doubled (4) All terms and symbols are consistent with ANS I/IE E E C 62.35151050100t p , P ulse Duration (sec)Fig. 2 Ð P uls e Derating C urveP P P M , P e a k P u l s e P o w e r (k W )Fig. 1 Ð P eak Puls e P ower R ating Cur veT r a n s i e n t T h e r m a l I m p e d a n c e ( o C /W )Number of C ycles at 60 Hz0.0010.010.11101001000I P P M , P e a k P u l s e C u r r e n t , % I R S M。
SMDJ中文资料
MDE Semiconductor, Inc.78-150 Calle Tampico, Unit 210, La Quinta, CA. U.S.A. 92253 Tel: 760-564-8656 • Fax: 760-564-2414SMDJ SERIESSURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORVOLTAGE-5.0 TO 170 Volts3000 Watt Peak Pulse PowerFEATURES• For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief• Glass passivated junction • Low inductance• Excellent clamping capability• Repetition rate (duty cycle):0.01%• Fast response time: typically less than1.0 ps from 0 volts to BV for unidirectional types • Typical IR less than 1µA above 10V • High temperature soldering: 250°C/10 seconds at terminals• Plastic package has Underwriters Laboratory Flammability Classification 94 V-OMECHANICAL DATACase: JEDEC DO214AB. Molded plastic over glass passivated junctionTerminals: Solder plated, solderable per MIL-STD-750, Method 2026Polarity: Color band denoted positive end (cathode)except BidirectionalStandard Packaging: 12mm tape (EIA STD RS-481)Weight: 0.007 ounces, 0.021 grams)DEVICES FOR BIPOLAR APPLICATIONSFor Bidirectional use C or CA Suffix for types SMDJ5.0 thru types SMDJ170 (e.g. SMDJ5.0C, SMDJ170CA)Electrical characteristics apply in both directions.MAXIMUM RATINGS AND CHARACTERISTICSRatings at 25°C ambient temperature unless otherwise specified.RATING SYMBOL VALUEUNITSPeak Pulse Power Dissipation on 10/1000 µswaveform (NOTE 1, 2, Fig.1)Ippm SEE TABLE 1Amps Superimposed on Rated Load, (JEDEC Method)(Note2, 3)Operatings and Storage Temperature Range Tj, Tstg -55 +150°C NOTES:1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.2. Mounted on Copper Pad area of 0.8x0.8" (20x20mm) per Fig.5.3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.P ppmMinimum 3000Watts Peak Pulse Current of on 10/1000 µs waveform (Note 1,Fig 3)I FSM100Amps Peak Forward Surge Current, 8.3ms Single Half Sine-waveMDE Semiconductor, Inc.MDE Semiconductor, Inc.78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel: 760-564-8656 • Fax: 760-564-2414 3000 Watt Surface Mount TVSUNI- DIRECTIONALPARTNUMBERDEVICEMARKINGCODEUNI-POLARDEVICEMARKINGCODE BI-POLARREVERSESTANDOFFVOLTAGEVRWM (V)BREAKDOWNVOLTAGEVBR (V)MIN. @ ITBREAKDOWNVOLTAGEVBR (V)MAX. @ ITTESTCURRENT(It)mAMAXIMUMCLAMPINGVOLTAGE@Ipp Vc (V)PEAKPULSECURRENTIpp (A)REVERSELEAKAGE@ VRWMIR (µA)SMDJ5.0RDD DDD 5.00 6.407.30109.6312.5800 SMDJ5.0A RDE DDE 5.00 6.407.00109.2326.1800 SMDJ6.0RDF DDF 6.00 6.678.151011.4263.2800 SMDJ6.0A RDG DDG 6.00 6.677.371010.3291.3800 SMDJ6.5RDH DDH 6.507.228.821012.3243.9500 SMDJ6.5A RDK DDK 6.507.227.981011.2267.9500 SMDJ7.0PDL DDL7.007.789.511013.3225.6200 SMDJ7.0A PDM DDM7.007.788.601012.0250.0200 SMDJ7.5PDN DDN7.508.3310.20114.3209.8100 SMDJ7.5A PDP DDP7.508.339.21112.9232.6100 SMDJ8.0PDQ DDQ8.008.8910.90115.0200.050 SMDJ8.0A PDR DDR8.008.899.83113.6220.650 SMDJ8.5PDS DDS8.509.4411.50115.9188.720 SMDJ8.5A PDT DDT8.509.4410.40114.4208.320 SMDJ9.0PDU DDU9.0010.0012.20116.9177.510 SMDJ9.0A PDV DDV9.0010.0011.10115.4194.810 SMDJ10PDW DDW10.0011.1013.60118.8159.65 SMDJ10A PDX DDX10.0011.1012.30117.0176.55 SMDJ11PDY DDY11.0012.2014.90120.1149.35 SMDJ11A PDZ DDZ11.0012.2013.50118.2164.85 SMDJ12PED DED12.0013.3016.30122.0136.45 SMDJ12A PEE DEE12.0013.3014.70119.9150.85 SMDJ13PEF DEF13.0014.4017.60123.8126.15 SMDJ13A PEG DEG13.0014.4015.90121.5139.55 SMDJ14PEH DEH14.0015.6019.10125.8116.35 SMDJ14A PEK DEK14.0015.6017.20123.2129.35 SMDJ15PEL DEL15.0016.7020.40126.9111.55 SMDJ15A PEM DEM15.0016.7018.50124.4123.05 SMDJ16PEN DEN16.0017.8021.80128.8104.25 SMDJ16A PEP DEP16.0017.8019.70126.0115.45 SMDJ17PEQ DEQ17.0018.9023.10130.598.45 SMDJ17A PER DER17.0018.9020.90127.6108.75 SMDJ18PES DES18.0020.0024.40132.293.25 SMDJ18A PET DET18.0020.0022.10129.2102.75 SMDJ20PEU DEU20.0022.2027.10135.883.85 SMDJ20A PEV DEV20.0022.2024.50132.492.65 SMDJ22PEW DEW22.0024.4029.80139.476.15 SMDJ22A PEX DEX22.0024.4026.90135.584.55 SMDJ24PEY DEY24.0026.7032.60143.069.85 SMDJ24A PEZ DEZ24.0026.7029.50138.977.15 SMDJ26PFD DFD26.0028.9035.30146.664.45 SMDJ26A PFE DFE26.0028.9031.90142.171.35 SMDJ28PFF DFF28.0031.1038.00150.159.55 SMDJ28A PFG DFG28.0031.1034.40145.466.15 SMDJ30PFH DFH30.0033.3040.70153.556.15 SMDJ30A PFK DFK30.0033.3036.80148.462.05 SMDJ33PFL DFL33.0036.7044.90159.050.85 SMDJ33A PFM DFM33.0036.7040.60153.356.35MDE Semiconductor, Inc.78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel: 760-564-8656 • Fax: 760-564-2414 3000 Watt Surface Mount TVSUNI- DIRECTIONALPARTNUMBERDEVICEMARKINGCODEUNI-POLARDEVICEMARKINGCODE BI-POLARREVERSESTANDOFFVOLTAGEVRWM (V)BREAKDOWNVOLTAGEVBR (V)MIN. @ ITBREAKDOWNVOLTAGEVBR (V)MAX. @ ITTESTCURRENT(It)mAMAXIMUMCLAMPINGVOLTAGE@Ipp Vc (V)PEAKPULSECURRENTIpp (A)REVERSELEAKAGE@ VRWMIR (µA)SMDJ36PFN DFN36.0040.0048.90164.346.75 SMDJ36A PFP DFP36.0040.0044.20158.151.65 SMDJ40PFQ DFQ40.0044.4054.30171.442.05 SMDJ40A PFR DFR40.0044.4049.10164.546.55 SMDJ43PFS DFR43.0047.8058.40176.739.15 SMDJ43A PFT DFT43.0047.8052.80169.443.25 SMDJ45PFU DFU45.0050.0061.10180.337.45 SMDJ45A PFV DFV45.0050.0055.30172.741.35 SMDJ48PFW DFW48.0053.3065.20185.535.15 SMDJ48A PFX DFX48.0053.3058.90177.438.85 SMDJ51PFY DFY51.0056.7069.30191.132.95 SMDJ51A PFZ DFZ51.0056.7062.70182.436.45 SMDJ54A PGD DGD54.0060.0073.30196.331.25 SMDJ54A PGE DGE54.0060.0066.30187.134.45 SMDJ58PGF DGF58.0064.4078.701103.029.15 SMDJ58A PGG DGG58.0064.4071.20193.632.15 SMDJ60PGH DGH60.0066.7081.501107.028.05 SMDJ60A PGK DGK60.0066.7073.70196.831.05 SMDJ64PGL DGL64.0071.1086.901114.026.35 SMDJ64A PGM DGM64.0071.1078.601103.029.15 SMDJ70PGN DGN70.0077.8095.101125.024.05 SMDJ70A PGP DGP70.0077.8086.001113.026.55 SMDJ75PGQ DGQ75.0083.30102.001134.022.45 SMDJ75A PGR DGR75.0083.3092.101121.024.85 SMDJ78PGS DGS78.0086.70106.001139.021.65 SMDJ78A PGT DGT78.0086.7095.801126.023.85 SMDJ85PGU DGU85.0094.40115.001151.019.95 SMDJ85A PGV DGV85.0094.40104.001137.021.95 SMDJ90PGW DGW90.00100.00122.001160.018.85 SMDJ90A PGX DGX90.00100.00111.001146.020.55 SMDJ100PGY DGY100.00111.00136.001179.016.85 SMDJ100A PGZ DGZ100.00111.00123.001162.018.55 SMDJ110PHD DHD110.00122.00149.001196.015.35 SMDJ110A PHE DHE110.00122.00135.001177.016.95 SMDJ120PHF DHF120.00133.00163.001214.014.05 SMDJ120A PHG DHG120.00133.00147.001193.015.55 SMDJ130PHH DHH130.00144.00176.001230.013.05 SMDJ130A PHK DHK130.00144.00159.001209.014.45 SMDJ150PHL DHL150.00167.00204.001268.011.25 SMDJ150A PHM DHM150.00167.00185.001243.012.35 SMDJ160PHN DHN160.00178.00218.001287.010.55 SMDJ160A PHP DHP160.00178.00197.001259.011.65 SMDJ170PHQ DHQ170.00189.00231.001304.09.95 SMDJ170A PHR DHR170.00189.00209.001275.010.95 For Bidirectional type having Vrwm of 10volts and less, the IR limit is double.。
2.7W双声道立体音频放大器
2.7W双声道立体音频放大器概述4985SD是一款双通道桥接的音频功率放大器，在5V电源电压4Ω负载时，可提供2.7W的功率。
具有低功耗关断模式和过温保护功能。
在电路启动时，具有缓冲及防抖动功能。
功能特点l缓冲及防抖动l过温保护l低功耗关断模式l PO为1% THD+N, VDD = 5VRL=4Ω 2.2W(typ)RL=8Ω 1.4W(typ)l PO为10% THD+N, VDD = 5VRL=4Ω 2.7W(typ)RL=8Ω 1.7W(typ)l PO为1% THD+N, VDD = 4VRL=4Ω 1.4W(typ)RL=8Ω0.88W(typ)l关断电流0.04μA(typ)l工作电压范围 2.7V~5.5Vl封装方式：DIP16（4985SD）用途l手机、PDA、MP4、PMPl手提电脑l桌面音响设备l多媒体显示器管脚排列图管脚说明功能框图功能说明桥接参数说明4985SD由两对运算放大器组成双通道（通道A和通道B）立体声放大器。
外接反馈电阻R2，R4和输入电阻R1，R3决定了放大器A（-out）和B（-out）的闭环增益，同时内建20K电阻使放大器A的（+out）和B的（-out）端的增益为1。
4985SD所驱动的负载接在两放大器的输出端-OUTA和+OUTA之间。
放大器A的（-out）端就是放大器A的（+out）端的输入端，这就使两个输出端产生的信号有180°的相位差，利用这个相位差，桥接模式下的增益为：A VD=2*（Rf/Ri）或者A VD=2*（R2/R1）桥接模式比单端模式更有优势。
在桥接模式下，差分输出使增益翻倍，它的输出功率是相同情况下单端模式的4倍。
桥接模式的另一个优势是在负载上没有直流电压。
输出信号由通道A和B偏置在VDD/2。
所以它无需在单端模式下的耦合电容。
在单端输出模式下，如果不使用输出耦合电容，就会在负载上产生一个VDD/2的直流偏置电压，这就会增加芯片的功耗并对负载造成永久性的损害。
SILICON SM5812 5852 Datasheet
SILICONMICROSTRUCTURES I N C O R P O R A T E DSM5812/SM5852Amplified Pressure Sensor• N OW WITH ACCESS TO D IGITAL T EMPERATURE AND C ORRECTED D IGITAL P RESSURE • L OW -COST , FULLY AMPLIFIED , CALIBRATED , AND COMPENSATED IN A SINGLE PACKAGE• A VAILABLE FOR D IFFERENTIAL , S INGLE -ENDED DIFFERENTIAL , G AGE & A BSOLUTE APPLICATIONS •M ULTIPLE PRESSURE RANGES AVAILABLE TO MEASURE PRESSURE DOWN TO 0.15 PSI FULL -SCALEAND UP TO 100 PSI FULL -SCALEDESCRIPTIONThe Silicon Microstructures SM5812 and SM5852 series of OEM pressure sensors combines state-of-the-art pressure sensor technology with CMOS digital signal processing technology to produce an amplified, fully conditioned, multi-order pressure and temperature compensated sensor in a dual in-line package (DIP) configuration.Combining the pressure sensor with acustom signal conditioning ASIC in a single package simplifies the use of advanced silicon micromachined pressure sensors. Now, the pressure sensor can be mounted directly to a standard printed circuit board and an amplified, high level, calibrated pressure signal can be acquired from the digital interface or analog output. This eliminates the need of additional circuitry, such as a compensation network or micro-controller containing a custom correction algorithm.The SM5812/SM5852 Series pressure sensors are based on SMI's highly stable, piezoresistive pressure sensor chips mounted on a ceramic substrate. An electronically programmable ASIC iscontained in the same package to provide calibration and temperature compensation.The model SM5812 is designed foroperating pressure ranges from 0-5 PSI up to 0-100 PSI. The model SM5852 isdesigned for operating pressure ranges from 0-0.15 PSI up to 0-3 PSI. For both models, the sensor output is ratiometric with the supply voltage.FEATURES• Amplified, calibrated, fully signalconditioned output span of 4.0 VDC FS (0.5 to 4.5 V signal)• Digital temperature and calibratedpressure available through I 2C interface • Output ratiometric with supply voltage • Multi-order correction for pressure non-linearity (factory programmed)• Multi-order correction for temperature coefficient of span and offset (factory programmed)• Gage, differential, and absolute versions •SMI’s unique low-pressure die allows for a full-scale pressure range of 0-0.15 PSITYPICAL APPLICATIONS• Barometric measurement • Medical instrumentation • Pneumatic control • Gas flow• Respirators and ventilators•Heating, Ventilation and Air Conditioning (HVAC)查询SM5812-005-A-3-L供应商SM5812/SM5852THEORY OF OPERATIONThe operation of the signal processor is depicted in the block diagram below. The external pressure sensor is a piezoresistive bridge. This transduces the applied pressure into an electronic signal, which is then inputted into the integrating amplifier of the ASIC. During the amplification step an offset correction factor is added in order to allow maximum gain for a given pressure while minimizing the offset error.The signal is then passed to an 11-bit analog to digital converter (ADC). The ADC samples the signal multiple times and uses the sum of those samples as a 13-bit word.A digital signal processor (DSP) is then used to correct and calibrate the pressure signal. The DSP provides multi-order correction of both pressure and temperature non-linearity through the use of factory-programmed coefficients. A combined total of twenty coefficients are available for correcting pressure and temperature non-linearity. The unique coefficients are determined during a calibration process performed at the factory. Factory calibration is the last step performed which means the effect of the package on the pressure signal will also be taken into account. This provides a great advantage over conventional laser-trimming approaches.The DSP outputs a corrected digital word, which travels to a 12-bit digital to analog converter (DAC) to provide a calibrated analog output. In addition to the analog output, the corrected pressure signal is accessible through an I2C digital interface. See SMI application note AN05-001 for a detailed description of how to read out the digital corrected pressure signal using theI2C bus interface.Analog OutputSDA SCLSILICONMICROSTRUCTURES I N C O R P O R A T E DSM5812/SM5852CHARACTERISTICS FOR SM5812/SM5852 – SPECIFICATIONSAll parameters are measured at room temperature while applying 5.000V supply, unless otherwise specified.Absolute 1, Gage & Single 2DifferentialMIN TYP MAX MIN TYP MAX UNITS NOTES Zero output (absolute and gauge) 0.42 0.50 0.58 V 3 Zero output (differential)2.422.502.58V3Output Span3.924.00 4.08 1.96 2.00 2.04 V FS 3, 40.15 PSI 3.80 4.00 4.20 1.90 2.00 2.10 V FS 3, 4 Linearity -0.5 +0.5 -0.5 +0.5 %FS 5 0.15 PSI-2.5+2.5-2.5+2.5%FS5 Pressure hysteresis 5812 -0.1 +0.1 -0.1 +0.1 %FS5852 -0.3+0.3 -0.3 +0.3 %FS Temperature coefficient - Zero-1.0 +1.0 -1.0 +1.0 %FS 0.15 PSI-2.5 +2.5 -2.5 +2.5 %FS Temperature coefficient – Span-1.0 +1.0 -1.0 +1.0 %FS 0.15 PSI-2.0 +2.0 -2.0 +2.0 %FS Thermal hysteresis -0.1 +0.1 -0.1 +0.1 %FS Response Time 2 2 msec Supply voltage 4.75 5.00 5.25 4.75 5.00 5.25 V 3, 7Current consumption10 10 mAOverpressure 5812 3X 3X %FS 65852 15X15X %FS 6 Operating temperature range -40 25 +125 -40 25 +125 °C Compensated temperature range 0 25 +70 0 25 +70 °CStorage temperature range -5525+135-5525+135°CMedia compatibility 8Weight 3 3 gramNotes: 1. Absolute parts are only offered in the SM5812 Series.2. Single-ended parts (Pressure Type - S) have 2 ports and are for higher gain differential applications where the differential pressure is always positive.3. Sensor output is ratiometric to supply.4.Full-scale (FS) is defined as zero pressure to rated pressure; differential parts can be used ±FS. Absolute and Gauge zero output is 0.5 V typical and full-scale output is 4.5 V. Span is the difference between Full-scale output and zero output, (4 V). For Differential parts, the negative full-scale is typically at 0.5 V, zero is typically 2.5 V, and positive full-scale is 4.5 volts to give a span of ±2.0 V.5. Defined as best fit straight line for positive pressure applied to the part6. Or 225 PSI, whichever is less. Output amplifier will saturate at about 0.25 V for applied pressure below the rated Zero and at about 4.75 V for applied pressure above the rated Full-scale.7. A 100 nF filter capacitor must be placed between Vsupply and Ground.8.Clean, dry gas compatible with wetted materials. Wetted materials include Pyrex glass, silicon, alumina ceramic, epoxy, RTV, gold, aluminum, and nickel.SM5812/SM5852ADDITIONAL INFORMATIONFull-Scale Pressure RangesSM5812 PSI [kPa] SM5852 PSI [kPa]005 5 [34.5] 001 0.15 [1.0] 015 15 [103.4]003 0.30 [2.1] 030 30 [206.8]008 0.80 [5.5] 060 60 [413.7]015 1.50 [10.3] 100 100[689.5]030 3.00 [20.7]。
SMAJ58A,TVS瞬变抑制二极管中文资料
SURFACE MOUNT TRANSIENT VOLAGE SUPPESSOR DIODESMAJ5.0A(CA) - SMAJ440A(CA)POWER: 400Wa t VOLTAGE RANGE: 5.0 - 440 VSee Page 2Maximum Ratings@ T A = 25°C unless otherwise specifiedNotes:1. Valid provided that terminals are kept at ambient temperature.2. Measured with 8.3ms single half sine-wave. Duty cycle = 4 pulses per minute maximum.3. Unidirectional units only.Glass Passivated Die ConstructionUni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response TimePlastic Material: UL Flammability Classification Rating 94V-0Mechanical DataCase:SMA, Transfer Molded EpoxyTerminals: Solderable per MIL-STD-202,Method 208Polarity Indicator: Cathode Band(Note: Bi-directional devices have no polarity indicator.)Marking: Date Code and Marking CodeWeight:0.064 grams (approx.)Features!!!!!!!!!!53.345.41.01.010.0 10.010.036.733.333.322.231.128.9 28.926.7 18.917.815.613.311.19.09.08.58.58.08.07.57.06.56.55.0(BI)(Uni)Breakdown Marking Reverse Stand-Off Voltage Voltage Min. @I TBreakdownVoltage Max. @ I TTestCurrentMaximum Clamping Voltage @I PPPeak Pulse Current Reverse Leakage @V RMW(Uni) (Bi)V RMW (V) V BR MIN (V) V BR MAX (V)I T (mA)V C (V) I PP (A) I R (uA) SMAJ5.0 SMAJ5.0C HD TD 6.40 7.55 10.0 9.6 41.7 800.0SMAJ5.0A SMAJ5.0CA HE TE 5.0 6.40 7.25 9.2 43.5 800.0 SMAJ6.0 SMAJ6.0C HF TF 6.0 6.67 8.45 10.0 11.4 35.1 800.0 SMAJ6.0A SMAJ6.0CA HG TG 6.0 6.67 7.67 10.3 38.8 800.0SMAJ6.5 SMAJ6.5C HH TH 7.22 9.14 10.0 12.3 32.5 500.0 SMAJ6.5A SMAJ6.5CA HK TK 7.22 8.30 10.0 11.2 35.7 500.0 SMAJ7.0 SMAJ7.0C HL TL 7.78 9.86 10.0 13.3 30.1 200.0 SMAJ7.0A SMAJ7.0CA HM TM 7.0 7.78 8.95 12.0 33.3 200.0 SMAJ7.5 SMAJ7.5C HN TN 8.33 10.67 1.0 14.3 28.0 100.0 SMAJ7.5A SMAJ7.5CA HP TP 7.5 8.33 9.58 12.9 31.0 100.0 SMAJ8.0 SMAJ8.0C HQ TQ 8.89 11.3 1.0 15.0 26.7 50.0 SMAJ8.0A SMAJ8.0CA HR TR 8.89 10.23 1.0 13.6 29.4 50.0 SMAJ8.5 SMAJ8.5C HS TS 9.44 11.92 15.9 25.2 20.0 SMAJ8.5A SMAJ8.5CA HT TT 9.44 10.82 1.0 14.4 27.8 20.0 SMAJ9.0 SMAJ9.0C HU TU 10.0 12.6 1.0 16.9 23.7 10.0 SMAJ9.0A SMAJ9.0CA HV TV 10.0 11.5 1.0 15.4 26.0 10.0 SMAJ10 SMAJ10C HW TW 10 14.1 1.0 18.8 21.3 5.0 SMAJ10A SMAJ10CA HX TX 10 11.1 12.8 1.0 17.0 23.5 5.0SMAJ11 SMAJ11C HY TY 1112.2 15.4 1.0 20.1 19.9 5.0SMAJ11A SMAJ11CA HZ TZ 1112.2 14.0 1.0 18.2 22.0 5.0SMAJ12 SMAJ12C ID UD 12 16.9 1.0 22.0 18.2 5.0 SMAJ12A SMAJ12CA IE UE 12 13.3 15.3 1.0 19.9 20.1 5.0SMAJ13 SMAJ13C IF UF 13 14.4 18.2 1.0 23.8 16.8 5.0SMAJ13A SMAJ13CA IG UG 13 14.4 16.5 1.0 21.5 18.6 5.0SMAJ14 SMAJ14C IH UH 14 19.8 1.0 25.8 15.5 5.0 SMAJ14A SMAJ14CA IK UK 14 15.6 17.9 1.0 23.2 17.2 5.0SMAJ15 SMAJ15C IL UL 15 16.7 21.1 1.0 26.9 14.9 5.0SMAJ15A SMAJ15CA IM UM 15 16.7 19.2 1.0 24.4 16.4 5.0SMAJ16 SMAJ16C IN UN 16 22.6 1.0 28.8 13.9 5.0 SMAJ16A SMAJ16CA IP UP 16 17.8 20.5 1.0 26.0 15.4 5.0SMAJ17 SMAJ17C IQ UQ 17 23.9 1.0 30.5 13.1 5.0SMAJ17A SMAJ17CA IR UR 17 18.9 21.7 1.0 27.6 14.5 5.0SMAJ18 SMAJ18C IS US 18 20.0 25.3 1.0 32.2 12.4 5.0 SMAJ18A SMAJ18CA IT UT 18 20.0 23.3 1.0 29.2 13.7 5.0SMAJ20 SMAJ20C IU UU 20 28.1 1.0 35.8 11.2 5.0SMAJ20A SMAJ20CA IV UV 20 22.2 25.5 1.0 32.4 12.3 5.0SMAJ22 SMAJ22C IW UW 22 24.4 30.9 1.0 39.4 10.2 5.0 SMAJ22A SMAJ22CA IX UX 22 24.4 28.0 1.0 35.5 11.3 5.0SMAJ24 SMAJ24C IY UY 24 33.8 1.0 43.0 9.3 5.0SMAJ24A SMAJ24CA IZ UZ 24 26.7 30.7 1.0 38.9 10.3 5.0SMAJ26 SMAJ26C JD VD 26 36.6 1.0 46.6 8.6 5.0 SMAJ26A SMAJ26CA JE VE 26 33.2 1.0 42.1 9.5 5.0SMAJ28 SMAJ28C JF VF 28 39.4 1.0 50.0 8.0 5.0SMAJ28A SMAJ28CA JG VG 28 31.1 35.8 1.0 8.8 5.0SMAJ30 SMAJ30C JH VH 30 42.2 1.0 53.5 7.5 5.0 SMAJ30A SMAJ30CA JK VK 30 38.3 1.0 48.4 8.3 5.0SMAJ33 SMAJ33C JL VL 33 46.5 1.0 59.0 6.8 5.0SMAJ33ASMAJ33CAJM VM33 36.7 42.2 1.0 7.5 5.0TYPE(BI)(Uni)Breakdown Marking Reverse Stand-Off Voltage Voltage Min. @I T Breakdown Voltage Max. @ I T Test CurrentMaximum Clamping Voltage @I PPPeak Pulse Current ReverseLeakage@V RMW(Uni)(Bi)V RMW (V) V BR MIN (V)V BR MAX (V)I T (mA)V C (V)I PP (A) I R (uA) 77.4 69.453.3 50.0 50.047.7SMAJ43 SMAJ43C JS VS 4360.5 1.0 76.7 5.2 5.0 SMAJ43A SMAJ43CA JT VT 43 47.8 54.9 1.0 5.8 5.0SMAJ45 SMAJ45C JU VU 45 63.3 1.0 80.3 5.0 5.0SMAJ45CA JV VV 45 57.5 1.0 72.7 5.5 5.0SMAJ45A SMAJ48C JW VW 48 67.5 1.0 85.5 4.7 5.0 SMAJ48A SMAJ48CA JX VX 48 53.3 61.3 1.0 5.2 5.0SMAJ48 94.077.871.196.866.793.687.160.082.456.7 SMAJ51 SMAJ51C JY VY 51 71.8 1.0 91.1 4.4 5.0SMAJ51A SMAJ51CA JZ VZ 51 56.7 65.2 1.0 4.9 5.0SMAJ54 SMAJ54C RD WD 54 76.0 1.0 96.3 4.2 5.0SMAJ54A SMAJ54CA RE WE 54 60.0 69.0 1.0 4.6 5.0SMAJ58 SMAJ58C RF WF 58 64.4 81.6 1.0 103 3.9 5.0SMAJ58A SMAJ58CA RG WG 58 64.4 74.1 1.0 4.3 5.0SMAJ60 SMAJ60C RH WH 60 84.5 1.0 107 3.7 5.0 SMAJ60A SMAJ60CA RK WK 60 66.7 76.7 1.0 4.1 5.0SMAJ64 SMAJ64C RL WL 64 90.1 1.0 114 3.5 5.0SMAJ64A SMAJ64CA RM WM 64 71.1 81.8 1.0 103 3.9 5.0SMAJ70 SMAJ70C RN WN 70 98.6 1.0 125 3.2 5.0 SMAJ70A SMAJ70CA RP WP 70 77.8 89.5 1.0 113 3.5 5.0SMAJ75 SMAJ75C RQ WQ 75 83.0 105.7 1.0 134 3.0 5.0SMAJ75A SMAJ75CA RR WR 75 83.0 95.8 1.0 121 3.3 5.0SMAJ78 SMAJ78C RS WS 78 86.0 109.8 1.0 139 2.9 5.0 SMAJ78A SMAJ78CA RT WT 78 86.0 99.7 1.0 126 3.2 5.0SMAJ85 SMAJ85C RU WU 85 119.2 1.0 151 2.6 5.0SMAJ85A SMAJ85CA RV WV 85 94.0 108.2 1.0 137 2.9 5.0SMAJ90 SMAJ90C RW WW 90 100 126.5 1.0 160 2.5 5.0 SMAJ90A SMAJ90CA RX WX 90 100 115.5 1.0 146 2.7 5.0SMAJ100 SMAJ100C RY WY 100 111 141.0 1.0 179 2.2 5.0SMAJ100A SMAJ100CA RZ WZ 100 111 128.0 1.0 162 2.5 5.0SMAJ110 SMAJ110C SD XD 110 122 154.5 1.0 196 2.0 5.0 SMAJ110A SMAJ110CA SE XE 110 122 140.5 1.0 177 2.3 5.0SMAJ120 SMAJ120C SF XF 120 133 169.0 1.0 214 1.9 5.0SMAJ120A SMAJ120CA SG XG 120 133 153.0 1.0 193 2.1 5.0SMAJ130 SMAJ130C SH XH 130 144 182.5 1.0 231 1.7 5.0 SMAJ130A SMAJ130CA SK XK 130 144 165.5 1.0 209 1.9 5.0SMAJ150 SMAJ150C SL XL 150 167 211.5 1.0 268 1.5 5.0SMAJ150A SMAJ150CA SM XM 150 167 192.5 1.0 243 1.6 5.0SMAJ160 SMAJ160C SN XN 160 178 226.0 1.0 287 1.4 5.0 SMAJ160A SMAJ160CA SP XP 160 178 205.0 1.0 259 1.5 5.0SMAJ170 SMAJ170C SQ XQ 170 189 239.5 1.0 304 1.3 5.0SMAJ170ASMAJ170CASR XR170 189 217.5 1.0 275 1.5 5.0TYPE64.544.440.040.0SMAJ36SMAJ36C JN VN 36 50.7 1.0 64.3 6.2 5.0 SMAJ36A SMAJ36CA JP VP 36 46.0 1.0 58.1 6.9 5.0SMAJ40 SMAJ40C JQ VQ 40 56.3 1.0 71.4 5.6 5.0SMAJ40A SMAJ40CA JR VR 40 44.4 51.1 1.0 6.2 5.0SMAJ180SMAJ180C SSXS 180200 253.8 1.0 321 1.2 5.0 SMAJ180A SMAJ180CA ST XT 180 200 230.4 1.0 290 1.4 5.0SMAJ190 SMAJ190C SU XU 190 211 267.9 1.0 339 1.2 5.0SMAJ190A SMAJ190CA SV XV 190 211 243.2 1.0 306 1.3 5.0SMAJ200 SMAJ200C SW XW 200222 282.0 1.0 356 1.1 5.0 SMAJ200A SMAJ200CA SX XX 200 222 256.0 1.0 322 1.2 5.0SMAJ210 SMAJ210C SY XY 210233 296.1 1.0 375 1.1 5.0SMAJ210A SMAJ210CA SZ XZ 210 233 268.8 1.0 339 1.2 5.0SMAJ220 SMAJ220C ZD YD 220244 310.2 1.0 392 1.0 5.0 SMAJ220A SMAJ220CA ZE YE 220 244 281.6 1.0 355 1.1 5.0SMAJ250 SMAJ250C ZF YF 250278 342.5 1.0 447 0.9 5.0SMAJ250A SMAJ250CA ZG YG 250 278 309.0 1.0 403 1.0 5.0SMAJ300 SMAJ300C ZH YH 300333 411.0 1.0 535 0.7 5.0 SMAJ300A SMAJ300CA ZK YK 300 333 371.0 1.0 484 0.8 5.0SMAJ350 SMAJ350C ZL YL 350389 479.5 1.0 624 0.6 5.0SMAJ350A SMAJ350CA ZM YM 350 389 432.0 1.0 565 0.7 5.0SMAJ400 SMAJ400C ZN YN 400444 548.0 1.0 687 0.6 5.0 SMAJ400A SMAJ400CA ZP YP 400 444 494.0 1.0 645 0.6 5.0SMAJ440 SMAJ440C ZQ YQ 440489 602.8 1.0 786 0.5 5.0SMAJ440A SMAJ440CA ZR YR 440 489 543.0 1.0 710 0.6 5.0(BI)(Uni)Breakdown Marking Reverse Stand-Off Voltage Voltage Min. @I T Breakdown Voltage Max. @ I T Test CurrentMaximum Clamping Voltage @I PPPeak Pulse Current ReverseLeakage@V RMW(Uni)(Bi)V RMW (V)V BR MIN (V)V BR MAX (V)I T (mA)V C (V)I PP (A) I R (uA) TYPERatingsand Characteristic Curves T A =25°C unless otherwise notedSMAJ58A。
多旋绝对编码器AVM58-0产品说明书
19-07-16 12:03D a t e o f i s s u e : 2019-07-16t 49169_e n g .x m l** Aluminium: d = 59, stainless steel: d = 61** Aluminium: d = 59, stainless steel: d = 6119-07-16 12:03D a t e o f i s s u e : 2019-07-16t 49169_e n g .x m l19-07-16 12:03D a t e o f i s s u e : 2019-07-16t 49169_e n g .x m l19-07-16 12:03D a t e o f i s s u e : 2019-07-16t 49169_e n g .x m lThe Synchronous Serial Interface was specially developed for transferring the output data of an absolute encoder to a control device. The control module sends a clock bundle and the absolute encoder responds with the position value.Thus only 4 lines are required for the clock and data, no matter what the resolution of the rotary encoder is. The RS 422 interface is optically isolated from the power supply.SSI signal course Standard•At idle status signal lines "Data +" and "Clock +" are at high level (5V).•The first time the clock signal switches from high to low, the data transfer in which the current information (position data (D n ) and special bit (S)) is stored in the encoder is introduced.•The highest order bit (MSB) is applied to the serial data output of the encoder with the first rising pulse edge.•The next successive lower order bit is transferred with each following rising pulse edge.•After the lowest order bit (LSB) has been transferred the data line switches to low until the monoflop time T m has expired.•No subsequent data transfer can be started until the data line switches to high again or the time for the clock pause T p has expired.•After the clock sequence is complete, the monoflop time T m is triggered with the last falling pulse edge.•The monoflop time T m determines the lowest transmission frequency.SSI output format ring slide operation (multiple transmission)•In ring slide operation, multiple transmission of the same data word over the SSI interface makes it possible to offer the possibility of detecting transmission errors.•In multiple transmission, 25 bits are transferred per data word in standard format.•If the clock change is not interrupted after the last falling pulse edge, ring slide operation automatically becomes active. This means that the information that was stored at the time of the first clock change is generated again.•After the first transmission, the 26th pulse controls data repetition. If the 26th pulse follows after an amount of time greater than the monoflop time T m , a new current data word will be transmitted with the following pulses.If the pulse line is exchanged, the data word is generated offset.Ring slide operation is possible up to max. 13 bits.Block diagram Line lengthDescriptionLine length in mBaudrate in kHz< 50< 400< 100< 300< 200< 200< 400< 10019-07-16 12:03D a t e o f i s s u e : 2019-07-16t 49169_e n g .x m lThe selection of the counting direction input (V/R) is activated with 0-level. The zero-set input (PRESET 1) is activated with 1-level.Signal outputsInputs! cw - with view onto the shaft19-07-16 12:03D a t e o f i s s u e : 2019-07-16t 49169_e n g .x m lFor additional information on the accessories, please see the "Accessories" section.For typeAccessoriesName/defining feature Order codeAVM58*-011CouplingsD1: Ø10 mm, D2: Ø10 mm9401D1: Ø10 mm, D2: Ø10 mm 9404D1: Ø10 mm, D2: Ø10 mm 9409D1: Ø10 mm, D2: Ø10 mm KW Measurement wheels with circumference of 500 mmPlastic9101, 10Pimpled rubber 9102, 10Knurled aluminium 9103, 10Knurled plastic 9112, 10Measurement wheels with circumference of 200 mmPlastic9108, 10Pimpled rubber 9109, 10Knurled aluminium 9110, 10Knurled plastic9113, 10Mounting aidsMounting bracket 9203Mounting bracket 9213AVM58*-032CouplingsD1: Ø6 mm, D2: Ø6 mm 9401D1: Ø6 mm, D2: Ø6 mm9402D1: Ø6 mm, D2: Ø6 mm 9404D1: Ø6 mm, D2: Ø6 mm 9409D1: Ø6 mm, D2: Ø6 mmKWMounting aidsMounting bracket and set 9300 and 9311-3Eccentric clamping elements 9310-3AllConnectorsCable socket 9416Cable socket9416L19-07-16 12:03D a t e o f i s s u e : 2019-07-16t 49169_e n g .x m lA V M 58–0–Number of bits singleturn 124096 (standard)1381921665536Number of bits multiturn124096 (standard)1416384Options N Standard1Incremental track 1024 pulses, Push/Pull 2Incremental track 2048 pulses, Push/Pull 3Incremental track 4096 pulses, Push/Pull 4Incremental track 1024 pulses, RS4225Incremental track 2048 pulses, RS4226Incremental track 4096 pulses, RS422Output codeB Binary GGrayExit position A Axial RRadialConnection typeK1Cable Ø7 mm, 6 x 2 x 0.14 mm², 1 m AA Plug connector type 9416, 12-pin ABPlug connector type 9416L, 12-pinShaft dimension/flange version011Shaft Ø10 mm x 20 mm with clamping flange 032Shaft Ø6 mm x 10 mm with servo flangeHousing material N Aluminium, powder coated IInox*Principle of operation M MultiturnShaft versionV Solid shaftData formatASSI (Synchronous Serial Interface)*Housing material I only available with axial exit position.。
58型电子管步话机
58型无线电步谈机58型无线电步谈机是安徽省邮电器材厂的产品。
这是一种收发两用便携式无线电台，适合于移动性较大的短距离无线电通信，最大通话距离为5公里。
由于工作频率选择于超短波范围，因此使用步谈机作联络时应选择平坦地区，两机之间无巨大障碍物。
在山区使用时，应保持两机之间无山巅阻隔，不然将严重影响通话。
线路说明这架机器共用三只3A4电子管，2只收话时作超再生检波，发话时作高频振荡；另一只收话时作低放，发话时作调幅。
收发话用四刀双掷波段开关S控制，收话时旋向a,发话时旋向b（图1）。
这里用三芯塞子P1，三芯塞孔J1和机件相联，为的是使用方便一些。
收话收话时V1、V2完成超再生检波，检波后的音频电压经S2，C10加到V3的第一栅极上，由V3放大后输入受话器的受话器（耳机）。
两只3A4组成的推挽振荡器，由于栅漏电阻R1的阻值高（100千欧），因而产生音频间歇振荡，于是振荡器便成为自灭式超再生检波器，间歇振荡所产生的熄灭电压，使振荡随熄灭频率交替地引起振荡或停止振荡，始终保持检波器工作在振荡与不振荡之间。
因此灵敏度比一般再生要高得多。
在没有外来信号时，由于振荡的产生是由毫无规则的杂乱电压所引起，因此屏流变化也不规则，结果在受话器内可听到一种超再生接收机所特有的“咝咝”声，调节天线电容C1，使天线回路和振荡回路谐振，咝咝声最大，也就是接收机灵敏度最高的时候。
当有高频信号经天线回路到交连到振荡回路时，如果这个信号电压大于杂乱电压，那么它就代替杂乱电压发生振荡，因而屏流稳定不变，咝咝声消失。
当机件装妥后，如果零件良好，接线无误，便可听到上述的咝咝声。
如果输入信号是已经话音调幅的已调波，则检波管屏流将随话音变化，受话器里便可听到对方的说话。
发信发话时T1经S3、塞孔J1的接点b，把送话器（话筒）接通，S4切断受话器。
S1将R2、R3并联；并联后栅漏电阻阻值降低，使V1、V2从原来的间歇振荡变成连续振荡，振荡电能经L1和C1交连到天线辐射出去。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
MDE Semiconductor, Inc.78-150 Calle Tampico, Unit 210, La Quinta, CA. U.S.A. 92253 Tel: 760-564-8656 • Fax: 760-564-2414SMDJ SERIESSURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORVOLTAGE-5.0 TO 170 Volts3000 Watt Peak Pulse PowerFEATURES• For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief• Glass passivated junction • Low inductance• Excellent clamping capability• Repetition rate (duty cycle):0.01%• Fast response time: typically less than1.0 ps from 0 volts to BV for unidirectional types • Typical IR less than 1µA above 10V • High temperature soldering: 250°C/10 seconds at terminals• Plastic package has Underwriters Laboratory Flammability Classification 94 V-OMECHANICAL DATACase: JEDEC DO214AB. Molded plastic over glass passivated junctionTerminals: Solder plated, solderable per MIL-STD-750, Method 2026Polarity: Color band denoted positive end (cathode)except BidirectionalStandard Packaging: 12mm tape (EIA STD RS-481)Weight: 0.007 ounces, 0.021 grams)DEVICES FOR BIPOLAR APPLICATIONSFor Bidirectional use C or CA Suffix for types SMDJ5.0 thru types SMDJ170 (e.g. SMDJ5.0C, SMDJ170CA)Electrical characteristics apply in both directions.MAXIMUM RATINGS AND CHARACTERISTICSRatings at 25°C ambient temperature unless otherwise specified.RATING SYMBOL VALUEUNITSPeak Pulse Power Dissipation on 10/1000 µswaveform (NOTE 1, 2, Fig.1)Ippm SEE TABLE 1Amps Superimposed on Rated Load, (JEDEC Method)(Note2, 3)Operatings and Storage Temperature Range Tj, Tstg -55 +150°C NOTES:1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.2. Mounted on Copper Pad area of 0.8x0.8" (20x20mm) per Fig.5.3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.P ppmMinimum 3000Watts Peak Pulse Current of on 10/1000 µs waveform (Note 1,Fig 3)I FSM100Amps Peak Forward Surge Current, 8.3ms Single Half Sine-waveMDE Semiconductor, Inc.MDE Semiconductor, Inc.78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel: 760-564-8656 • Fax: 760-564-2414 3000 Watt Surface Mount TVSUNI- DIRECTIONALPARTNUMBERDEVICEMARKINGCODEUNI-POLARDEVICEMARKINGCODE BI-POLARREVERSESTANDOFFVOLTAGEVRWM (V)BREAKDOWNVOLTAGEVBR (V)MIN. @ ITBREAKDOWNVOLTAGEVBR (V)MAX. @ ITTESTCURRENT(It)mAMAXIMUMCLAMPINGVOLTAGE@Ipp Vc (V)PEAKPULSECURRENTIpp (A)REVERSELEAKAGE@ VRWMIR (µA)SMDJ5.0RDD DDD 5.00 6.407.30109.6312.5800 SMDJ5.0A RDE DDE 5.00 6.407.00109.2326.1800 SMDJ6.0RDF DDF 6.00 6.678.151011.4263.2800 SMDJ6.0A RDG DDG 6.00 6.677.371010.3291.3800 SMDJ6.5RDH DDH 6.507.228.821012.3243.9500 SMDJ6.5A RDK DDK 6.507.227.981011.2267.9500 SMDJ7.0PDL DDL7.007.789.511013.3225.6200 SMDJ7.0A PDM DDM7.007.788.601012.0250.0200 SMDJ7.5PDN DDN7.508.3310.20114.3209.8100 SMDJ7.5A PDP DDP7.508.339.21112.9232.6100 SMDJ8.0PDQ DDQ8.008.8910.90115.0200.050 SMDJ8.0A PDR DDR8.008.899.83113.6220.650 SMDJ8.5PDS DDS8.509.4411.50115.9188.720 SMDJ8.5A PDT DDT8.509.4410.40114.4208.320 SMDJ9.0PDU DDU9.0010.0012.20116.9177.510 SMDJ9.0A PDV DDV9.0010.0011.10115.4194.810 SMDJ10PDW DDW10.0011.1013.60118.8159.65 SMDJ10A PDX DDX10.0011.1012.30117.0176.55 SMDJ11PDY DDY11.0012.2014.90120.1149.35 SMDJ11A PDZ DDZ11.0012.2013.50118.2164.85 SMDJ12PED DED12.0013.3016.30122.0136.45 SMDJ12A PEE DEE12.0013.3014.70119.9150.85 SMDJ13PEF DEF13.0014.4017.60123.8126.15 SMDJ13A PEG DEG13.0014.4015.90121.5139.55 SMDJ14PEH DEH14.0015.6019.10125.8116.35 SMDJ14A PEK DEK14.0015.6017.20123.2129.35 SMDJ15PEL DEL15.0016.7020.40126.9111.55 SMDJ15A PEM DEM15.0016.7018.50124.4123.05 SMDJ16PEN DEN16.0017.8021.80128.8104.25 SMDJ16A PEP DEP16.0017.8019.70126.0115.45 SMDJ17PEQ DEQ17.0018.9023.10130.598.45 SMDJ17A PER DER17.0018.9020.90127.6108.75 SMDJ18PES DES18.0020.0024.40132.293.25 SMDJ18A PET DET18.0020.0022.10129.2102.75 SMDJ20PEU DEU20.0022.2027.10135.883.85 SMDJ20A PEV DEV20.0022.2024.50132.492.65 SMDJ22PEW DEW22.0024.4029.80139.476.15 SMDJ22A PEX DEX22.0024.4026.90135.584.55 SMDJ24PEY DEY24.0026.7032.60143.069.85 SMDJ24A PEZ DEZ24.0026.7029.50138.977.15 SMDJ26PFD DFD26.0028.9035.30146.664.45 SMDJ26A PFE DFE26.0028.9031.90142.171.35 SMDJ28PFF DFF28.0031.1038.00150.159.55 SMDJ28A PFG DFG28.0031.1034.40145.466.15 SMDJ30PFH DFH30.0033.3040.70153.556.15 SMDJ30A PFK DFK30.0033.3036.80148.462.05 SMDJ33PFL DFL33.0036.7044.90159.050.85 SMDJ33A PFM DFM33.0036.7040.60153.356.35MDE Semiconductor, Inc.78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel: 760-564-8656 • Fax: 760-564-2414 3000 Watt Surface Mount TVSUNI- DIRECTIONALPARTNUMBERDEVICEMARKINGCODEUNI-POLARDEVICEMARKINGCODE BI-POLARREVERSESTANDOFFVOLTAGEVRWM (V)BREAKDOWNVOLTAGEVBR (V)MIN. @ ITBREAKDOWNVOLTAGEVBR (V)MAX. @ ITTESTCURRENT(It)mAMAXIMUMCLAMPINGVOLTAGE@Ipp Vc (V)PEAKPULSECURRENTIpp (A)REVERSELEAKAGE@ VRWMIR (µA)SMDJ36PFN DFN36.0040.0048.90164.346.75 SMDJ36A PFP DFP36.0040.0044.20158.151.65 SMDJ40PFQ DFQ40.0044.4054.30171.442.05 SMDJ40A PFR DFR40.0044.4049.10164.546.55 SMDJ43PFS DFR43.0047.8058.40176.739.15 SMDJ43A PFT DFT43.0047.8052.80169.443.25 SMDJ45PFU DFU45.0050.0061.10180.337.45 SMDJ45A PFV DFV45.0050.0055.30172.741.35 SMDJ48PFW DFW48.0053.3065.20185.535.15 SMDJ48A PFX DFX48.0053.3058.90177.438.85 SMDJ51PFY DFY51.0056.7069.30191.132.95 SMDJ51A PFZ DFZ51.0056.7062.70182.436.45 SMDJ54A PGD DGD54.0060.0073.30196.331.25 SMDJ54A PGE DGE54.0060.0066.30187.134.45 SMDJ58PGF DGF58.0064.4078.701103.029.15 SMDJ58A PGG DGG58.0064.4071.20193.632.15 SMDJ60PGH DGH60.0066.7081.501107.028.05 SMDJ60A PGK DGK60.0066.7073.70196.831.05 SMDJ64PGL DGL64.0071.1086.901114.026.35 SMDJ64A PGM DGM64.0071.1078.601103.029.15 SMDJ70PGN DGN70.0077.8095.101125.024.05 SMDJ70A PGP DGP70.0077.8086.001113.026.55 SMDJ75PGQ DGQ75.0083.30102.001134.022.45 SMDJ75A PGR DGR75.0083.3092.101121.024.85 SMDJ78PGS DGS78.0086.70106.001139.021.65 SMDJ78A PGT DGT78.0086.7095.801126.023.85 SMDJ85PGU DGU85.0094.40115.001151.019.95 SMDJ85A PGV DGV85.0094.40104.001137.021.95 SMDJ90PGW DGW90.00100.00122.001160.018.85 SMDJ90A PGX DGX90.00100.00111.001146.020.55 SMDJ100PGY DGY100.00111.00136.001179.016.85 SMDJ100A PGZ DGZ100.00111.00123.001162.018.55 SMDJ110PHD DHD110.00122.00149.001196.015.35 SMDJ110A PHE DHE110.00122.00135.001177.016.95 SMDJ120PHF DHF120.00133.00163.001214.014.05 SMDJ120A PHG DHG120.00133.00147.001193.015.55 SMDJ130PHH DHH130.00144.00176.001230.013.05 SMDJ130A PHK DHK130.00144.00159.001209.014.45 SMDJ150PHL DHL150.00167.00204.001268.011.25 SMDJ150A PHM DHM150.00167.00185.001243.012.35 SMDJ160PHN DHN160.00178.00218.001287.010.55 SMDJ160A PHP DHP160.00178.00197.001259.011.65 SMDJ170PHQ DHQ170.00189.00231.001304.09.95 SMDJ170A PHR DHR170.00189.00209.001275.010.95 For Bidirectional type having Vrwm of 10volts and less, the IR limit is double.。