诺瑞斯高压软管CP HiTex 481说明书

Weight lbs./ft
1.245 1.295 1.470 1.410 1.545 1.615 1.680 1.745 1.810 1.940 1.420 1.510 1.555 1.600 1.645 1.695 1.875 2.010 2.105 2.130 2.330 2.370 2.560 2.605 2.780 2.830 2.925 3.010
hose reel, slotted floor channel, underfloor extraction system • engine test bench, exhaust gas measurement • high temperature extraction: oven, foundry, furnace, smelting, ceramics industry, glass industry, steel plant, aluminium mill • bellows, compensators
Further production
lengths ft
-
Order No.
481-0330-0000 481-0350-0000 481-0356-0000 481-0375-0000 481-0400-0000 481-0406-0000 481-0450-0000 481-0457-0000 481-0500-0000 481-0508-0000 481-0600-0000 481-0610-0000 481-0700-0000 481-0712-0000 481-0750-0000 481-0800-0000 481-0815-0000 481-0900-0000 481-0915-0000 481-1000-0000 481-1016-0000
Positive and negative pressure ratings are the recommended maximum operating values. Products can be manufactured to meet higher operating values upon request. The bend radius is calculated from the center of the hose in an arched position. Additional information at . NORRES reserves the right to modify technical data at any time. Technical data based on tests at 68°F and are approx. values. Proper use and maintenance of NORRES hoses is the sole responsibility of purchaser and ultimate user of the product. The individual conditions, applications and the number of variables make firm recommendations technically impossible. This information is intended as a general guide only.
Bending Radius
in
1.67 1.75 1.93 2.09 2.24 2.30 2.40 2.46 2.56 2.72 2.87 3.03 3.11 3.19 3.25 3.35 3.66 3.88 4.04 4.09 4.45 4.51 4.82 4.90 5.24 5.31 5.45 5.61
Design, material CP construction
1. clamp profile supporting spiral: all-stainless steel (INOX)
2. double-layer wall; wall: interior and exterior stainless steel wire reinforced and special coated glass fabric
Properties
• very good resistance to flying sparks and welding sparks
• abrasion protection via external clamp profile • secure clamping of the wall within the clamp

1
20180913
CP HiTex 481 +15%
I.D. in / mm
13 / 330 - / 350 14 / 356 - / 375 - / 400 16 / 405-406 - / 450 18 / 457 - / 500 20 / 508 - / 600 24 / 610 - / 700 28 / 712 - / 750 - / 800 32 / 813-815 - / 900 36 / 915 - / 1000 40 / 1016
Stock length
ft
12.5 25 -
12.5 25 12.5 25
12.5 25
12.5 25
12.5 25
-
Production Length ft
12.5 25
12.5 25 12.5 25 12.5 25 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5
CP HiTex 481 +15%
1
High-temperature hose, clamp profile hose (clip hose), double-layer (up to +1,292°F)2Applications
• flexible hose/ ducting for hot and cold gases • vehicle/ car gas exhaust system, gas extraction:
O.D. in
13.54 14.33 14.57 15.31 16.30 16.54 18.27 18.54 20.24 20.55 24.17 24.57 28.11 28.58 30.08 32.05 32.64 35.98 36.57 39.92 40.55
Vacuum inHG
0.45 0.45 0.45 0.45 0.45 0.45 0.30 0.30 0.15 0.15 0.15 0.15 0.15 0.15 0.10 0.05 0.05 0.05 0.05 0.05 0.05
Delivery variants
• further diameters and lengths available on request
I.D. in / mm
3 / 75-76 - / 80
3.5 / 89-90 4 / 100-102
- / 110 4.5 / 114-115
4.72 / 120 5 / 125-127
Vacuum inHG
8.55 7.40 5.30 4.45 3.85 3.55 3.25 2.95 2.80 2.20 1.75 1.60 1.60 1.50 1.50 1.50 1.20 1.05 0.90 0.90 0.90 0.90 0.75 0.75 0.60 0.60 0.60 0.45
Stock length
ft
25 25 25 12.5 25 12.5 25 12.5 25 12.5 25 12.5 25 12.5 25 12.5 25 12.5 25 12.5 25 12.5 25 12.5 25 12.5 25 12.5 25 12.5 25 12.5 25 12.5 25 12.5 25
Positive and negative pressure ratings are the recommended maximum operating values. Products can be manufactured to meet higher operating values upon request. The bend radius is calculated from the center of the hose in an arched position. NORRES reserves the right to modify technical data at any time. Technical data based on tests at 68°F and are approx. values. Proper use and maintenance of NORRES hoses is the sole responsibility of purchaser and ultimate user of the product. The individual conditions, applications and the number of variables make firm recommendations technically impossible. This information is intended as a general guide only. Additional information at /us/technology-us/
O.D. in
3.50 3.70 4.09 4.49 4.88 5.08 5.28 5.47 5.67 6.06 6.46 6.85 7.05 7.24 7.44 7.64 8.43 9.02 9.41 9.53 10.39 10.55 11.38 11.57 12.36 12.56 12.95 13.35
profile • very good heat resistance • flame-retardant according to: DIN 4102-B1 • conforms to RoHS guideline
Temperature range
• -75°F to 1,100°F • short time to 1,300°F
Production Length ft
25 12.5 25 12.5 25 12.5 25 12.5 25 12.5 25 12.5 25 12.5 25 -
Further production
lengths ft
-
Order No.
481-0075-0000 481-0080-0000 481-0090-0000 481-0100-0000 481-0110-0000 481-0115-0000 481-0120-0000 481-0125-0000 481-0130-0000 481-0140-0000 481-0150-0000 481-0160-0000 481-0165-0000 481-0170-0000 481-0175-0000 481-0180-0000 481-0200-0000 481-0215-0000 481-0225-0000 481-0228-0000 481-0250-0000 481-0254-0000 481-0275-0000 481-0280-0000 481-0300-0000 481-0305-0000 481-0315-0000 481-0325-0000
- / 130 5.5 / 140 6 / 150-152 6.3 / 160 6.5 / 165
- / 170 - / 175 7 / 178-180 8 / 200-203 - / 215 - / 225 9 / 228-229 - / 250 10 / 254 - / 275 11 / 280 - / 300 12 / 305 - / 315 - / 325
Bending Radius
in
5.69 6.02 6.12 6.40 6.81 6.91 7.60 7.72 8.39 8.50 9.96 10.12 11.54 11.73 12.32 13.11 13.35 14.69 14.92 16.26 16.52
Weight lbs./ft
3.055 3.240 3.285 3.425 3.695 3.750 4.145 4.210 4.605 4.675 5.515 5.610 6.425 6.535 6.880 7.330 7.470 8.245 8.385 9.150 9.295