Nitromide_121-81-3_DataSheet_MedChemExpress
200种化学品理化特性表(83页)
200种化学品目录丙烯酸丁酯的理化及危险特性表 (1)丙烯酸的理化及危险特性表 (2)硝酸锌的理化及危险特性表 (3)过氧化二苯甲酰的理化及危险特性表 (4)过硫酸铵的理化及危险特性表 (5)丁酮的理化及危险特性表 (6)苯酚的主要理化和危险特性 (7)甲基叔丁基醚的主要理化及危险特性 (8)三聚氰酸的主要理化和危险特性 (9)季戊四醇的主要理化和危险特性 (10)硬脂醇的主要理化和危险特性 (11)多聚甲醛的主要理化和危险特性 (12)1，2-二甲苯的主要理化及危险特性 (13)1，3-二甲苯的主要理化及危险特性 (14)1，4-二甲苯的主要理化及危险特性 (15)环己烯的主要理化和危险特性 (16)二丁胺的主要理化和危险特性 (17)三乙胺的主要理化和危险特性 (18)甲基二氯硅烷的主要理化和危险特性 (19)异丁烯的主要理化和危险特性 (20)邻叔丁基苯酚的主要理化和危险特性 (21)对叔丁基苯酚的主要理化和危险特性 (22)环己烷的主要理化和危险特性 (23)二氯甲烷的主要理化和危险特性 (24)三氯甲烷的主要理化及危险特性 (25)硫脲的主要理化和危险特性 (26)六亚甲基四胺的主要理化和危险特性 (27)抗氧剂AT-10的主要理化和危险特性 (28)抗氧剂AT-76的主要理化和危险特性 (29)抗氧剂AT-3114的主要理化和危险特性 (30)催化剂JH-CMMS的主要理化和危险特性 (31)抗氧剂AT-168的主要理化和危险特性 (32)甲氧基钠的主要理化和危险特性 (33)氧气的理化及危险特性 (34)硝酸钾的理化及危险特性表 (35)硝酸钙的理化及危险特性表 (36)液氯的理化及危险特性 (37)盐酸的理化及危险特性 (38)丙酮理化及危险特性表 (39)次氯酸钠的理化及危险特性表 (40)二甲氧基甲烷的理化及危险特性表 (41)乙酸的理化及危险特性表 (42)香蕉水的理化及危险特性表 (43)甲醇的理化及危险特性表 (44)氰化亚铜的理化及危险特性 (45)硝酸的理化及危险特性 (46)硫酸的理化及危险特性 (47)铬酸的理化及危险特性 (48)铬酸酐的理化及危险特性 (49)氰化钠的理化及危险特性 (50)丁醇的理化及危险特性 (51)异丙醇的的理化及危险特性 (52)硝酸银的理化及危险特性表 (53)间戊二烯的理化及危险特性 (54)环戊二烯的理化及危险特性 (55)甲苯二异氰酸酯的理化及危险特性表 (56)200#溶剂油的理化及危险特性表 (57)聚氨酯漆固化剂理化及危险特性表 (58)聚氨酯漆稀释剂理化及危险特性表 (59)N，N--二甲基甲酰胺理化及危险特性 (60)丙烯腈理化及危险特性 (61)二氧化硫的特性 (62)异戊二烯的理化及危险特性 (63)醋酸丁酯的理化及危险特性 (64)醋酸乙酯的理化及危险特性 (65)甲苯的理化及危险特性 (66)环己酮的理化及危险特性 (67)三氯化铝(无水)的理化及危险特性 (68)氢氧化钠的理化及危险特性 (69)硝酸铅的理化及危险特性表 (70)电石理化及危险特性表 (71)乙炔理化及危险特性表 (72)氰化亚铜的理化及危险特性 (73)丙烯酸甲酯理化及危险特性................ 错误！未定义书签。
CHEMLOK 8110 商品安全数据表说明书
USA SAFETY DATA SHEET3000000013401. CHEMICAL PRODUCT AND COMPANY IDENTIFICATIONProduct name: CHEMLOK 8110 Product Use/Class:Aqueous AdhesiveLORD Corporation 111 LORD DriveCary, NC 27511-7923 USATelephone: 814 868-3180Non-Transportation Emergency: 814 763-2345 Chemtrec 24 Hr Transportation Emergency No.800 424-9300 (Outside Continental U.S. 703 527-3887)EFFECTIVE DATE: 08/21/20192. HAZARDS IDENTIFICATIONGHS CLASSIFICATION:Skin sensitization Category 1Reproductive toxicity Category 1BSpecific target organ systemic toxicity (single exposure) Category 1 Respiratory system, Systemic toxicity Specific target organ systemic toxicity (repeated exposure) Category 1 Aspiration hazard Category 1Hazardous to the aquatic environment - acute hazard Category 2 Hazardous to the aquatic environment - chronic hazard Category 2GHS LABEL ELEMENTS: Symbol(s)Signal WordD ANGERHazard StatementsMay cause an allergic skin reaction.May damage fertility or the unborn child.Causes damage to organs.(Respiratory system, Systemic toxicity) Causes damage to organs through prolonged or repeated exposure. May be fatal if swallowed and enters airways. Toxic to aquatic life.Toxic to aquatic life with long lasting effects.Precautionary Statements PreventionObtain special instructions before use.Do not handle until all safety precautions have been read and understood. Wear protective gloves.Use personal protective equipment as required. Do not breathe dust/fume/gas/mist/vapors/spray. Wash thoroughly after handling.Do not eat, drink or smoke when using this product.Contaminated work clothing should not be allowed out of the workplace. Avoid release to the environment.ResponseGet medical advice/attention if you feel unwell.IF exposed: Call a POISON CENTER or doctor/physician.Specific treatment (see supplemental first aid instructions on this label).IF ON SKIN: Wash with plenty of soap and water.If skin irritation or rash occurs: Get medical advice/attention.IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.Do NOT induce vomiting.Wash contaminated clothing before reuse.Collect spillage.StorageStore locked up.Disposal:Dispose of contents/container in accordance with waste/disposal laws and regulations of your country or particular locality.Other Hazards:This product contains component(s) which have the following warnings; however based on the GHS classification criteria of your country or locale, the product mixture may be outside the respective category(s).Acute: Vapor harmful; may affect the brain or nervous system causing dizziness, headache or nausea. May cause central nervous system depression characterized by the following progressive steps: headache, dizziness, staggering gait, confusion, unconsciousness or coma. Possible irritation of the respiratory system can occur causing a variety of symptoms such as dryness of the throat, tightness of the chest, and shortness of breath. May cause skin and eyeirritation. May be harmful if swallowed. Ingestion is not an expected route of entry in industrial or commercial uses.Chronic: Prolonged or repeated contact may result in dermatitis. Repeated or prolonged solvent overexposure may result in permanent central nervous system damage. Formaldehyde may be released from this product in processes that involve heat. Formaldehyde is a skin and respiratory sensitizer, eye and throat irritant, and acute toxicant.Formaldehyde has been identified by NTP and IARC as a known human carcinogen (IARC 1), and by OSHA as a potential human carcinogen. Workplace exposure to formaldehyde is regulated by OSHA Standard 29 CFR1910.1048. IARC has designated carbon black as Group 2B - inadequate evidence for carcinogenicity in humans, but sufficient evidence in experimental animals. In 2006 IARC reaffirmed its 1995 finding that there is "inadequateevidence" from human health studies to assess whether carbon black causes cancer in humans. Further,epidemiological evidence from well-conducted investigations has shown no causative link between carbon black exposure and the risk of malignant or non-malignant respiratory disease in humans. IARC has designated titanium dioxide (TiO2) as Group 2B – possibly carcinogenic to humans in dust form. However, a number of long termanimal studies and human epidemiology studies evaluating TiO2 and workplace exposure show insufficient evidence for carcinogenic effects. EPA, NTP and OSHA do not designate TiO2 as a carcinogen and ACGIH designates TiO2 as A4 - not classifiable as a human carcinogen. Mortaility from other chronic diseases, including other respiratory diseases, was not associated with exposure to TiO2 dust. TiO2 is not present in this product as a dust and no airborne exposure is expected during application.3. COMPOSITION/INFORMATION ON INGREDIENTSChemical Name CAS Number RangeZinc compound PROPRIETARY 5 - 10%Carbon black1333-86-4 1 - 5%Propylene glycol monomethylether107-98-2 1 - 5%Nonylphenol ethoxylate compound PROPRIETARY0.1 - 0.9%Titanium dioxide13463-67-70.1 - 0.9%Resorcinol108-46-30.1 - 0.9%Any "PROPRIETARY" component(s) in the above table is considered trade secret, thus the specific chemical and its exact concentration is being withheld.The above Nonylphenol ethoxylate compound is listed by ECHA as an SVHC.4. FIRST AID MEASURESFIRST AID - EYE CONTACT: Flush eyes immediately with large amount of water for at least 15 minutes holding eyelids open while flushing. Get prompt medical attention.FIRST AID - SKIN CONTACT: Flush contaminated skin with large amounts of water while removing contaminated clothing. Wash affected skin areas with soap and water. Get medical attention if symptoms occur.FIRST AID - INHALATION: Move person to fresh air. Restore and support continued breathing. If breathing is difficult, give oxygen. Get immediate medical attention.FIRST AID - INGESTION: If swallowed, do not induce vomiting. Call a physician or poison control center immediately for further instructions. Never give anything by mouth if victim is rapidly losing consciousness, unconscious or convulsing.5. FIRE-FIGHTING MEASURESSUITABLE EXTINGUISHING MEDIA: Carbon Dioxide, Dry Chemical, Foam, Water FogUNSUITABLE EXTINGUISHING MEDIA: Not determined for this product.SPECIFIC HAZARDS POSSIBLY ARISING FROM THE CHEMICAL: Keep containers tightly closed. Closed containers may rupture when exposed to extreme heat. Use water spray to keep fire exposed containers cool. During a fire, irritating and/or toxic gases and particulate may be generated by thermal decomposition or combustion.SPECIAL PROTECTIVE EQUIPMENT AND PRECAUTIONS FOR FIRE-FIGHTERS: Wear full firefighting protective clothing, including self-contained breathing apparatus (SCBA). If water is used, fog nozzles are preferable.6. ACCIDENTAL RELEASE MEASURESPERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES: Avoid contact. Avoid breathing vapors. Use appropriate respiratory protection for large spills or spills in confined area.ENVIRONMENTAL PRECAUTIONS: Do not contaminate bodies of water, waterways, or ditches, with chemical or used container.METHODS AND MATERIALS FOR CONTAINMENT AND CLEANUP: Keep non-essential personnel a safe distance away from the spill area. Notify appropriate authorities if necessary. Avoid contact. Before attempting cleanup, refer to hazard caution information in other sections of the SDS form. Contain and remove with inert absorbent material.7. HANDLING AND STORAGEHANDLING: Keep closure tight and container upright to prevent leakage. Avoid skin and eye contact. Wash thoroughly after handling. Do not handle until all safety precautions have been read and understood. Empty containers should not be re-used. Use with adequate ventilation.STORAGE: Store only in well-ventilated areas. Keep from freezing. Keep container closed when not in use.INCOMPATIBILITY: Strong acids, bases, and strong oxidizers.8. EXPOSURE CONTROLS/PERSONAL PROTECTIONCOMPONENT EXPOSURE LIMITChemical Name ACGIH TLV-TWA ACGIH TLV-STELOSHA PEL-TWAOSHA PEL-CEILINGSkinZinc compound 2 mg/m310 mg/m3 5 mg/m3 N.E.N.A.Carbon black 3 mg/m3N.E. 3.5 mg/m3 N.E.N.A. Propylene glycolmonomethylether100 ppm150 ppm N.E. N.E.N.A.Nonylphenol ethoxylatecompoundN.E.N.E.N.E. N.E.N.A.Titanium dioxide10 mg/m3N.E.15 mg/m3 N.E.N.A.Resorcinol10 ppm20 ppm N.E. N.E.N.A.N.A. - Not Applicable, N.E. - Not Established, S - Skin DesignationEngineering controls: Sufficient ventilation in pattern and volume should be provided in order to maintain air contaminant levels below recommended exposure limits.PERSONAL PROTECTION MEASURES/EQUIPMENT:RESPIRATORY PROTECTION: Use a NIOSH approved chemical/mechanical filter respirator designed toremove a combination of particulates and organic vapor if occupational limits are exceeded. For emergencysituations, confined space use, or other conditions where exposure limits may be greatly exceeded, use an approved air-supplied respirator. For respirator use observe OSHA regulations (29CFR 1910.134) or use in accordance with applicable laws and regulations of your country or particular locality. Note: If the exposure limit for formaldehyde is exceeded, a formaldehyde-specific, formaldehyde/organic vapor combination, or airline respirator may be required.SKIN PROTECTION: Use neoprene, nitrile, or rubber gloves to prevent skin contact.EYE PROTECTION: Use safety eyewear including safety glasses with side shields and chemical goggles where splashing may occur.OTHER PROTECTIVE EQUIPMENT: Remove and wash contaminated clothing before reuse.HYGIENIC PRACTICES: Wash hands before eating, smoking, or using toilet facility. Do not smoke in anychemical handling or storage area. Food or beverages should not be consumed anywhere this product is handled or stored. Wash thoroughly after handling.9. PHYSICAL AND CHEMICAL PROPERTIESTypical values, not to be used for specification purposes.ODOR: Mild VAPOR PRESSURE: N.D.APPEARANCE: Gray VAPOR DENSITY: Heavier than Air PHYSICAL STATE: Liquid LOWER EXPLOSIVE LIMIT: 1.6 %(V)FLASH POINT:≥ 201 °F, 93 °CUPPER EXPLOSIVE LIMIT: 13.8 %(V)Setaflash Closed CupBOILING RANGE: 100 - 120 °C EVAPORATION RATE: Slower than n-butyl-acetate AUTOIGNITION TEMPERATURE:N.D.DENSITY: 1.16 g/cm3 - 9.67 lb/gal DECOMPOSITION TEMPERATURE:N.D. VISCOSITY, DYNAMIC: ≥20 mPa.s @ 25 °C ODOR THRESHOLD: N.D.VISCOSITY, KINEMATIC: ≥17 mm2/s @ 25 °CSOLUBILITY IN H2O: Water Dispersible VOLATILE BY WEIGHT: 64.55 %pH: 6.5VOLATILE BY VOLUME: 75.28 %FREEZE POINT: 32 F VOC CALCULATED: 1.23 lb/gal, 148 g/l COEFFICIENT OF WATER/OILN.D. METHOD 24: 1.70 lb/gallonDISTRIBUTION:LEGEND: N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined10. STABILITY AND REACTIVITYHAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur under normal conditions. STABILITY: Product is stable under normal storage conditions.CONDITIONS TO AVOID: High temperatures. Sources of ignition.INCOMPATIBILITY: Strong acids, bases, and strong oxidizers.HAZARDOUS DECOMPOSITION PRODUCTS: May contain CO, CO2, oxides of nitrogen, oxides of sulfur, halogenated by-products, Metal oxides11. TOXICOLOGICAL INFORMATIONEXPOSURE PATH: Refer to section 2 of this SDS.SYMPTOMS:Refer to section 2 of this SDS.TOXICITY MEASURES:Chemical Name LD50/LC50Zinc compound Oral LD50: Rat> 5,000 mg/kgGHS LC50 (vapour): Acute toxicity point estimate55 mg/l Carbon black Oral LD50: Rat> 15,400 mg/kgDermal LD50: Rabbit> 3 g/kgGHS LC50 (vapour): Acute toxicity point estimate55 mg/l Propylene glycol monomethylether Oral LD50: Rat5,000 mg/kgDermal LD50: Rabbit13 g/kgGHS LC50 (vapour): Acute toxicity point estimate11 mg/l GHS LC50(dust and mist): Acute toxicity point estimate1.5 mg/l Inhalation LC50:Rat>7559 ppm/6 hNonylphenol ethoxylate compound N.D.Titanium dioxide Oral LD50: Rat> 10,000 mg/kgDermal LD50: rabbit> 5,000 mg/kgGHS LC50 (vapour): Acute toxicity point estimate55 mg/l Resorcinol Oral LD50: Rat202 mg/kgDermal LD50: Rabbit3,360 mg/kgInhalation LC50: Rat21.3 mg/l/1 hGerm cell mutagenicity: No classification proposedCarcinogenicity: No classification proposedReproductive toxicity: Category 1B - May damage fertility or the unborn child.Components contributing to classification: Methanol.12. ECOLOGICAL INFORMATIONECOTOXICITY:Chemical Name EcotoxicityZinc compound N.D.Carbon black N.D.Propylene glycol monomethylether Fish: Pimephales promelas20.8 g/l96 h StaticInvertebrates: Daphnia magna23,300 mg/l48 hNonylphenol ethoxylate compound N.D.Titanium dioxide N.D.Resorcinol Fish: Pimephales promelas36 - 100 mg/l96 h StaticPimephales promelas100 mg/l96 h flow-throughOncorhynchus mykiss> 100 mg/l96 h flow-throughPimephales promelas53.4 mg/l96 hInvertebrates: Daphnia magna78 mg/l48 hPERSISTENCE AND DEGRADABILITY:Not determined for this product. BIOACCUMULATIVE: Not determined for this product.MOBILITY IN SOIL: Not determined for this product.OTHER ADVERSE EFFECTS: Not determined for this product.13. DISPOSAL CONSIDERATIONSDISPOSAL METHOD: Disposal should be done in accordance with Federal (40CFR Part 261), state and local environmental control regulations. If waste is determined to be hazardous, use licensed hazardous waste transporter and disposal facility.14. TRANSPORT INFORMATIONUS DOT RoadProper Shipping Name: Environmentally hazardous substances, liquid, n.o.s.Hazard Class: 9SECONDARY HAZARD: NoneUN/NA Number: 3082Packing Group: IIIEmergency Response Guide Number: 171For US DOT non-bulk road shipments this material may be classified as NOT REGULATED. For the mostaccurate shipping information, refer to your transportation/compliance department regarding changes inpackage size, mode of shipment or other regulatory descriptors.IATA CargoPROPER SHIPPING NAME: Environmentally hazardous substance, liquid, n.o.s.Hazard Class: 9HAZARD CLASS: NoneUN NUMBER: 3082PACKING GROUP: IIIEMS: 9LIMDGPROPER SHIPPING NAME: Environmentally hazardous substance, liquid, n.o.s.Hazard Class: 9HAZARD CLASS: NoneUN NUMBER: 3082PACKING GROUP: IIIEMS: F-AThe listed transportation classification applies to non-bulk shipments. It does not address regulatory variations due to changes in package size, mode of shipment or other regulatory descriptors. For the most accurate shipping information, refer to your transportation/compliance department.15. REGULATORY INFORMATIONU.S. FEDERAL REGULATIONS: AS FOLLOWS:SARA SECTION 313This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the Superfund Amendment and Reauthorization Act of 1986 and 40 CFR part 372.:Chemical Name CAS Number Weight % Less ThanZinc compound PROPRIETARY10.0%TOXIC SUBSTANCES CONTROL ACT:INVENTORY STATUSThe chemical substances in this product are on the TSCA Section 8 Inventory.EXPORT NOTIFICATIONThis product contains the following chemical substances subject to the reporting requirements of TSCA 12(B) if exported from the United States:None16. OTHER INFORMATIONUnder HazCom 2012 it is optional to continue using the HMIS rating system. It is important to ensure employees have been trained to recognize the different numeric ratings associated with the HazCom 2012 and HMIS schemes.HMIS RATINGS - HEALTH: 2* FLAMMABILITY: 1 PHYSICAL HAZARD: 0* - Indicates a chronic hazard; see Section 2Revision: Section 2, Section 11Effective Date: 08/21/2019DISCLAIMERThe information contained herein is, to the best of our knowledge and belief, accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by use of this material. It is the responsibility of the user to comply with all applicable federal, state and local laws and regulations.。
美国FDA福迪安一氧化氮片资料
美国FDA福迪安一氧化氮片福迪安一氧化氮的7大优势1、美国原装进口采用国际先进配方，结合中国人健康状况而设计，由GMP药厂生产，通过ISO9001国际质量认证、国际食品安全管理体系认证，质量安全有保证。
2、安全无副作用绿色天然产品，纯植物萃取，没有任何毒副作用，服用更放心。
3、、科学配方，保障持续足量产生一氧化氮L—精氨酸是产生一氧化氮的基础物质，可以在L—瓜氨酸和几种关键的抗氧化剂的协同作用下，让人体产生大量的一氧化氮。
福迪安一氧化氮同时含有L—精氨酸和L—瓜氨酸，不仅能使机体稳定，还能很好的发挥对心脑健康的效果。
4、与抗氧化剂合用，保持NO的稳定、延长时效福迪安一氧化氮片含有原花青素、维生素E、维生素C三种超强抗氧化及，能很好的保护已经生成的NO，免除自由基侵扰，最大程度的延长NO活动及有效时间的效果。
5、萃取技术萃取物在生产工艺中的纯化阶段，一般厂家采用“化学断裂键法”脱离无效基团，不但产量低，脱离不彻底，而且还会引入化学杂质。
产生毒副作用。
本品采用生物发酵酶切技术，用限制性内切酶去切割萃取物的DNA片断。
这种酶会识别DNA的双链互补螺旋结构，专一性定向酶切。
不但纯度高，最大限度的脱离无效基团而且安全。
不引入任何杂质。
6、智能吸收途径——等渗跨膜转动提高技术药物在人体吸收的过程中，细胞间的转动可分为被动转运和主动转运两种方式。
被动转动呈浓度梯度转动，不耗能。
主动转运是需要载体及能量的跨膜转运需耗能。
由于NO不稳定性，使它对细胞间的跨膜转运条件要求十分苛刻。
当被动转运不能实现时，如进行主动耗能转运。
就极易破坏其结构而失效。
所以一般产品具有疗效部位的局限性，不能深入细胞组织。
而本技术加入等渗因子，智能识别并调节等渗转运条件。
提升第二信使的跨膜转运速度，使生物利用率高达96%以上，为目前吸收率及利用率最高的产品。
7、L-AC速效缓释技术NO的两大有效成分：L-精氨酸的作用是在机体内生成NO迅速起效。
美迪辛士化学产品清单表说明书
1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier Medisanitize Universal Wipes1.2 Relevant identified uses of the substance or mixture and uses advised againstUses:Disinfection of hands and hard surfaces 1.3 Details of the supplier of the Safety Data SheetCompany name Extergeo industries ltdAddress B5 Buckshaw linkBuckshaw villageChorleyPR7 7ELUKTelephone +44(0)1772347771EmailWebsite 1.4 Emergency Telephone Number 017723477712: Hazards identification2.1 Classification of the substance or mixture2.1.1Regulation (EC) No 1272/2008(CLP)Mixture not classified as hazardous2.2 Label elements2.2.1 Label elements Contains PHMB. May produce an allergic reaction.GHS Product Identifier Medisanitize Universal WipesSignal word(s) WarningPrecautionary statement Prevention P102 - Keep out of reach of children. P103 - Read label before use.Precautionary statement: Response P101 - If medical advice is needed, have product container or label at hand.P301+P330+P331: IF SWALLOWED: Rinse mouth.P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.2.3Other hazards Not classified as PBT or vPvB.3: Composition/Information on ingredients3.1 Substances4: First-aid measures4.1Description of first aidInhalationmeasures Move affected person to fresh air at once. When breathing is difficult, properly trained personnel may assist affected person by administering oxygen. Get medical attention.Eye contact Rinse immediately with plenty of water. Remove any contact lenses and openeyelids wide apart. Continue to rinse for at least 15 minutes. Get medical attention if any discomfort continues.Skin contact Remove contaminated clothing immediately and wash skin with soap andwater. Get medical attention if any discomfort continues. Wash contaminated clothing before reuse.IngestionMove affected person to fresh air and keep warm and at rest in a position comfortable for breathing. Rinse mouth thoroughly with water. Give plenty of water to drink. Do not induce vomiting. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention immediately.4.2Most important symptoms and effects, both acute and delayed May cause irritation.5.1 Extinguishing media Suitable extinguishing media for the surrounding fire should be used.5.2Special hazards arising from the substance or mixtureCorrosive. In combustion emits toxic fumes.5.3 Advice for firefighters Standard protective equipment should be worn by fire fighters, inparticular eye / face protection.6: Accidental release measures6.1 Personal precautions, Large spillages are highly unlikely due to pre-saturation of liquid on protectiveequipment and fabric substrate. emergency procedures6.2 Environmental precautions Do not allow product to enter drains. Do not flush into surface water.6.3 Methods and material for Transfer to suitable, labelled containers for disposal. Clean spillagecontainment and cleaning up area thoroughly with plenty of water.6.4 Reference to other sections For recommended personal protective equipment see Section 8. For disposal see Section 13.7: Handling and storage7.1 Precautions for safe handling Avoid contact with eyes. Adopt best Manual Handling considerationswhen handling, carrying and dispensing.7.2 Conditions for safe storage,including any incompatibilities Keep out of the reach of children. Keep in a cool, dry, well ventilated area. Keep containers tightly closed.7.3 Specific end use No relevant information available.8: Exposure controls/personal protection8.1 Control parametersExposure controls No data availableExposure Limit Values No data available8.2 Engineering controlsRespiratory protection Keep in a cool, dry, well ventilated area.Individual protection measures None normally requiredEnvironmental exposure controls None normally required9: Physical and chemical properties9.1 Information on basic physical and chemical propertiesAppearance White nonwoven fabric pre-saturated with a colourlesssolutionOdour SpearmintpH No information available10: Stability and reactivity10.1 Reactivity Stable under normal conditions of storage/use.10.2 Chemical Stability Stable under recommended storage and handling conditions.10.3 Possibility of hazardousNone expectedreactions10.4 Conditions to avoid Avoid excessive heat. Do not allow to freeze.10.5 Incompatible materials Strong acids and Strong bases. Strong oxidising agents.In combustion emits toxic fumes10.6 Hazardous decompositionproducts11: Toxicological informationNo data available for this product12: Ecological informationNo data available for this product13: Disposal considerations13.1 Waste treatment Dispose of as special waste in compliance with local and national regulations.methods Empty containers can be sent to landfill after cleaning, if in compliance with local and national regulations.14: Transport informationThis preparation is not classified as “Hazardous” for transport purposes15: Regulatory information15.1 Safety, health and environmental regulations / legislation specific for the substance or mixture Notapplicable.Chemical Safety Assessment15.2 A chemical safety assessment has not been carried out for the substance or the mixture by the supplier.16: Other informationRevision information:Reviewed – no changesList of Abbreviations used in this SDS:CAS Chemical Abstracts ServiceCLP Classification, Labelling and Packaging Regulation (EC) no 1272/2008EC European Community/CommissionPBT Persistent, Bioaccumulative and ToxicREACH Registration, Evaluation, Authorisation and Restriction of Chemicals Regulation(EC) no 1907/2006vPvB very Persistent, very BioaccumulativeReferencesCLP Regulation 1272/2008ECHA Chem database of registered substancesSuppliers’ SDSR Phrases and H Statements used in Section 3Acute Tox. 4: H312 - Harmful in contact with skinAcute Tox. 4: H302 - Harmful if swallowed.Skin Corr. 1B: H314 - Causes severe skin burns and eye damage.Aquatic Acute 1: H400 - Harmful to aquatic lifeAquatic Chronic 2: H411 - Toxic to aquatic life with long lasting effects Carc.2: H351 - Suspected of causing cancer.Acute Tox. 2: H330 - Fatal if inhaled.STOT RE 1: H372 - Causes damage to organs through prolonged or repeated exposure.Eye Dam. 1: H318 - Causes serious eye damage.Skin Sens. 1B: H317 - May cause an allergic skin reaction.Aquatic Chronic 1: H410 - Very toxic to aquatic life with long lasting effectsTraining requirements for workersNo specific training required for workersThis Safety Data Sheet contains information concerning the potential risks to those involved in handling, transporting, and working with the material, as well as describing potential risks to the consumer and the environment. This information is based on our present state of knowledge and is intended to describe our products from the point of view of the safety requirements. It should not be construed as guaranteeing specific properties. This Safety Data Sheet is prepared in accordance with formatting described in the REACH Regulation (EC) No 1907/2006 and described in CLP Regulation (EC) No 1272/2008.。
一氧化氮(NO)含量检测试剂盒.96S
一氧化氮（NO）含量检测试剂盒说明书(货号：NM-W-0132 微量法100T/96S)一、产品简介：一氧化氮（Nitric Oxide，NO）是一种气态分子自由基，在生物体内作为重要的信使分子和效应分子，参与调节血管形成、神经传递、免疫调控及肿瘤生长等多种生理及病理过程。
此外，NO是植物的主要生物活性分子，在植物的生长发育和对胁迫的反应过程中参与了多种生理活动，如种子萌发、叶扩展、根生长、花器官发生、气孔运动的调节以及植物的抗逆反应等。
NO在体内或水溶液中极易氧化生成NO2-。
在酸性条件下，NO2-与重氮盐磺酸胺生成重氮化合物，进一步与萘基乙烯基二胺偶合，产物在550nm处有特征吸收峰，测定其吸光值，可以计算NO含量。
酶标仪、96孔板、台式离心机、恒温水浴锅/培养箱、超声细胞破碎仪、研钵/匀浆器、天平、可调式移液器、冰和蒸馏水。
四、操作步骤：建议正式实验前选取2个样本做预测定，了解本批样品情况，熟悉实验流程，避免实验样本和试剂浪费！1、预实验样本制备℃ 组织样本：称取0.2g样本，加入1mL提取液进行冰浴匀浆后，10000g，4℃离心15min，取上清置于冰上待测。
【注】：若增加样本量，可按照组织质量(g)：提取液体积(mL)为2~5：10的比例进行提取。
℃ 细菌/细胞样本：建议1000万细菌或细胞加入1mL提取液，超声波破碎细菌或细胞（冰浴，功率200W，超声3s，间隔7s，总时间5min），10000g，4℃离心15min，取上清置于冰上待测。
【注】：若增加样本量，可按照细菌/细胞数量（104）：提取液（mL）为1000~2000：1的比例进行提取。
℃ 血清（浆）等液体样本：直接测定。
若液体有浑浊则离心取上清测定。
2、标准溶液的配制：把10μmol/mL标准品母液用蒸馏水稀释成1.25μmol/mL的标准溶3、预实验上机操作：℃ 酶标仪预热30min以上，调节波长至550nm。
4、正式实验：℃ 若预实验∆A 测定小于0.005，可以增加样本量后再进行测定；如果∆A测定大于1.5，建议将样本上清用稀释液适当稀释后再进行测定，并将改变后的W和D代入公式计算；℃ 确定好最适实验条件后，正式实验样本制备同预实验样本制备；℃ 正式实验按照预实验操作步骤进行（标准管和空白管预实验已做，正式实验可选做）。
IPI549-SDS-MedChemExpress
Inhibitors, Agonists, Screening LibrariesSafety Data Sheet Revision Date:Oct.-12-2018Print Date:Oct.-12-20181. PRODUCT AND COMPANY IDENTIFICATION1.1 Product identifierProduct name :IPI549Catalog No. :HY-100716CAS No. :1693758-51-81.2 Relevant identified uses of the substance or mixture and uses advised againstIdentified uses :Laboratory chemicals, manufacture of substances.1.3 Details of the supplier of the safety data sheetCompany:MedChemExpress USATel:609-228-6898Fax:609-228-5909E-mail:sales@1.4 Emergency telephone numberEmergency Phone #:609-228-68982. HAZARDS IDENTIFICATION2.1 Classification of the substance or mixtureGHS Classification in accordance with 29 CFR 1910 (OSHA HCS)Acute toxicity, Oral (Category 4), H302Acute aquatic toxicity (Category 1), H400Chronic aquatic toxicity (Category 1), H4132.2 GHS Label elements, including precautionary statementsPictogramSignal word No data availableHazard statement(s)H302 Harmful if swallowed.H413 Very toxic to aquatic life with long lasting effects.Precautionary statement(s)P264 Wash skin thoroughly after handling.P270 Do not eat, drink or smoke when using this product.P273 Avoid release to the environment.P301 + P312 IF SWALLOWED: Call a POISON CENTER or doctor ⁄physician if you feel unwell.P333 Rinse mouth.2.3 Other hazardsNone.3. COMPOSITION/INFORMATION ON INGREDIENTS3.1 SubstancesSynonyms:IPI-549;IPI 549Formula:C30H24N8O2Molecular Weight:528.56CAS No. :1693758-51-84. FIRST AID MEASURES4.1 Description of first aid measuresEye contactRemove any contact lenses, locate eye-wash station, and flush eyes immediately with large amounts of water. Separate eyelids with fingers to ensure adequate flushing. Promptly call a physician.Skin contactRinse skin thoroughly with large amounts of water. Remove contaminated clothing and shoes and call a physician.InhalationImmediately relocate self or casualty to fresh air. If breathing is difficult, give cardiopulmonary resuscitation (CPR). Avoid mouth-to-mouth resuscitation.IngestionWash out mouth with water; Do NOT induce vomiting; call a physician.4.2 Most important symptoms and effects, both acute and delayedThe most important known symptoms and effects are described in the labelling (see section 2.2).4.3 Indication of any immediate medical attention and special treatment neededTreat symptomatically.5. FIRE FIGHTING MEASURES5.1 Extinguishing mediaSuitable extinguishing mediaUse water spray, dry chemical, foam, and carbon dioxide fire extinguisher.5.2 Special hazards arising from the substance or mixtureDuring combustion, may emit irritant fumes.5.3 Advice for firefightersWear self-contained breathing apparatus and protective clothing.6. ACCIDENTAL RELEASE MEASURES6.1 Personal precautions, protective equipment and emergency proceduresUse full personal protective equipment. Avoid breathing vapors, mist, dust or gas. Ensure adequate ventilation. Evacuate personnel to safe areas.Refer to protective measures listed in sections 8.6.2 Environmental precautionsTry to prevent further leakage or spillage. Keep the product away from drains or water courses.6.3 Methods and materials for containment and cleaning upAbsorb solutions with finely-powdered liquid-binding material (diatomite, universal binders); Decontaminate surfaces and equipment by scrubbing with alcohol; Dispose of contaminated material according to Section 13.7. HANDLING AND STORAGE7.1 Precautions for safe handlingAvoid inhalation, contact with eyes and skin. Avoid dust and aerosol formation. Use only in areas with appropriate exhaust ventilation.7.2 Conditions for safe storage, including any incompatibilitiesKeep container tightly sealed in cool, well-ventilated area. Keep away from direct sunlight and sources of ignition.Recommended storage temperature:Powder-20°C 3 years4°C 2 yearsIn solvent-80°C 6 months-20°C 1 monthShipping at room temperature if less than 2 weeks.7.3 Specific end use(s)No data available.8. EXPOSURE CONTROLS/PERSONAL PROTECTION8.1 Control parametersComponents with workplace control parametersThis product contains no substances with occupational exposure limit values.8.2 Exposure controlsEngineering controlsEnsure adequate ventilation. Provide accessible safety shower and eye wash station.Personal protective equipmentEye protection Safety goggles with side-shields.Hand protection Protective gloves.Skin and body protection Impervious clothing.Respiratory protection Suitable respirator.Environmental exposure controls Keep the product away from drains, water courses or the soil. Cleanspillages in a safe way as soon as possible.9. PHYSICAL AND CHEMICAL PROPERTIES9.1 Information on basic physical and chemical propertiesAppearance White to yellow (Solid)Odor No data availableOdor threshold No data availablepH No data availableMelting/freezing point No data availableBoiling point/range No data availableFlash point No data availableEvaporation rate No data availableFlammability (solid, gas)No data availableUpper/lower flammability or explosive limits No data availableVapor pressure No data availableVapor density No data availableRelative density No data availableWater Solubility No data availablePartition coefficient No data availableAuto-ignition temperature No data availableDecomposition temperature No data availableViscosity No data availableExplosive properties No data availableOxidizing properties No data available9.2 Other safety informationNo data available.10. STABILITY AND REACTIVITY10.1 ReactivityNo data available.10.2 Chemical stabilityStable under recommended storage conditions.10.3 Possibility of hazardous reactionsNo data available.10.4 Conditions to avoidNo data available.10.5 Incompatible materialsStrong acids/alkalis, strong oxidising/reducing agents.10.6 Hazardous decomposition productsUnder fire conditions, may decompose and emit toxic fumes.Other decomposition products - no data available.11.TOXICOLOGICAL INFORMATION11.1 Information on toxicological effectsAcute toxicityClassified based on available data. For more details, see section 2Skin corrosion/irritationClassified based on available data. For more details, see section 2Serious eye damage/irritationClassified based on available data. For more details, see section 2Respiratory or skin sensitizationClassified based on available data. For more details, see section 2Germ cell mutagenicityClassified based on available data. For more details, see section 2CarcinogenicityIARC: No component of this product present at a level equal to or greater than 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.ACGIH: No component of this product present at a level equal to or greater than 0.1% is identified as a potential or confirmed carcinogen by ACGIH.NTP: No component of this product present at a level equal to or greater than 0.1% is identified as a anticipated or confirmed carcinogen by NTP.OSHA: No component of this product present at a level equal to or greater than 0.1% is identified as a potential or confirmed carcinogen by OSHA.Reproductive toxicityClassified based on available data. For more details, see section 2Specific target organ toxicity - single exposureClassified based on available data. For more details, see section 2Specific target organ toxicity - repeated exposureClassified based on available data. For more details, see section 2Aspiration hazardClassified based on available data. For more details, see section 212. ECOLOGICAL INFORMATION12.1 ToxicityNo data available.12.2 Persistence and degradabilityNo data available.12.3 Bioaccumlative potentialNo data available.12.4 Mobility in soilNo data available.12.5 Results of PBT and vPvB assessmentPBT/vPvB assessment unavailable as chemical safety assessment not required or not conducted.12.6 Other adverse effectsNo data available.13. DISPOSAL CONSIDERATIONS13.1 Waste treatment methodsProductDispose substance in accordance with prevailing country, federal, state and local regulations.Contaminated packagingConduct recycling or disposal in accordance with prevailing country, federal, state and local regulations.14. TRANSPORT INFORMATIONDOT (US)This substance is considered to be non-hazardous for transport.IMDGUN number: 3077Class: 12Packing group: IIIEMS-No: F-A, S-FProper shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S.Marine pollutant: Marine pollutantIATAUN number: 3077Class: 12Packing group: IIIProper shipping name: Environmentally hazardous substance, solid, n.o.s.15. REGULATORY INFORMATIONSARA 302 Components:No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.SARA 316 Components:This material does not contain any chemical components with known CAS numbers that exceed thethres33&33U_HKSCS33&MingLiU_HKSCS3333333333316. OTHER INFORMATIONCopyright 2018 MedChemExpress. The above information is correct to the best of our present knowledge but does not purport to be all inclusive and should be used only as a guide. The product is for research use only and for experienced personnel. It must only be handled by suitably qualified experienced scientists in appropriately equipped and authorized facilities. The burden of safe use of this material rests entirely with the user. MedChemExpress disclaims all liability for any damage resulting from handling or from contact with this product.Caution: Product has not been fully validated for medical applications. For research use only.Tel: 609-228-6898 Fax: 609-228-5909 E-mail: tech@Address: 1 Deer Park Dr, Suite Q, Monmouth Junction, NJ 08852, USA。
丙烯酸类单体性质
N,N-二甲基苯胺(DMA)1丙烯酸月桂酯(LA)2甲基丙烯酸羟乙酯(HEA)3甲基丙烯酸羟丙酯(HPA)4丙烯酸甲酯(MA)4甲基丙烯酸甲酯(MMA)5丙烯酸异冰片酯(IBOA)6甲基丙烯酸异冰片酯(IBOMA)7甲苯-2,4-二异氰酸酯(TDI)8三羟甲基丙烷三甲基丙烯酸酯(TMPTMA)9三羟甲基丙烷三丙烯酸酯(TMPTA)10环氧丙烯酸酯(EA)111,6-己二醇二丙烯酸酯(HDDA)12二月桂酸二丁基锡(DBTDL)13一缩二乙二醇双丙烯酸酯(DEGDA)14二缩三丙二醇二丙烯酸酯(TPGDA)14丙氧基化新戊二醇二丙烯酸酯(PO-NPGDA)15 N,N-.»»(DMA)来生产香兰素。
还可作为溶剂、橡胶硫化促进剂、炸药及某些有机中间体的原料。
生产盐基性染料(三苯基甲烷染料等)和碱性染料的基本原料之一，主要品种有碱性嫩黄，碱性紫5BN，碱性品绿，碱性湖蓝，艳红5GN，艳蓝等。
N,N-二甲基苯胺在医药工业中用于制造头孢菌素V，磺胺-b-甲氧嘧啶，磺胺邻二甲氧嘧啶，氟孢嘧啶等，在香料工业中用于制造香兰素等。
用作分析试剂是重要的染料中间体，主要用于制造偶氮染料、三苯甲烷染料，也是制香料、医药、炸药等的中间体。
生产方法由苯胺与甲醇在硫酸存在下，经高温高压反应而得。
原料消耗定额：苯胺790kg/t、甲醇625kg/t、硫酸85kg/t。
实验室制备可将苯胺与磷酸三甲酯反应。
毒性分级中毒类别库房通风低温干燥；与酸类、氧化剂、食品添加剂分开存放储运特性与空气混合可爆明火可燃；与氧化剂起作用;高热分解有毒氮氧化物烟雾灭火剂泡沫、二氧化碳、干粉、砂土粘度(25・)■■■■■■(LA)2-丙烯酸十二烷基酯C15H28O2英文名Dodecylacrylate结构式分子量240.38沸点~120°C1mmHg(lit.)密度0.884g/mLat25C(lit.)折射率n20/D1.445(lit.)HEA)甲基丙烯酸羟丙酯（HPA ）C7H10O2沸点57°C0.5mmHg(lit.)密度1.066g/mLat25°C(lit.)蒸汽密度>1(vsair)蒸汽压0.05mmHg(20°C)折射率20/D1.447(lit.)闪点206°F生产方法由甲基丙烯酸与环氧丙烷反应而得。
巴斯夫的清洁剂资料
Nonionic surfactantsLutensol®A 4 N C12C14-Fatty alcohol+ 4 EO ca. 62/ELutensol®A 7 N+7 EO ca. 56/A Lutensol®A 79 N+7 EO90 %,ca. 56/A Lutensol®A 8+8 EO90 %,ca. 52/ALutensol®AT 11C16C18-Fatty alcohol+11 EO ca. 87/ALutensol®AT 18+18 EO ca. 92/B Lutensol®AT 18 Solution+18 EO20 %,ca. 92/B Lutensol®AT 25 Powder+25 EO ca. 95/B Lutensol®AT 25 E+25 EO ca. 95/B Lutensol®AT 25 Flakes+25 EO ca. 95/B Lutensol®AT 50 Powder+50 EO ca. 92/B Lutensol®AT 50 Flakes+50 EO ca. 92/B Lutensol®AT 80 Powder+80 EO ca. 87/B Lutensol®AT 80 E+80 EO ca. 87/B Lutensol®AT 80 Flakes+80 EO ca. 87/BLutensol®AO 3C13C15-Oxo alcohol+ 3 EO ca. 45/ELutensol®AO 4+ 4 EO ca. 57/E Lutensol®AO 5+ 5 EO ca. 62/E Lutensol®AO 7+7 EO ca. 43/A Lutensol®AO 79+7 EO90 %,ca. 43/A Lutensol®AO 8+8 EO ca. 52/A Lutensol®AO 89+8 EO90 %,ca. 52/A Lutensol®AO 109+10 EO90 %,ca. 80/A Lutensol®AO 11+11 EO ca. 86/A Lutensol®AO 30+30 EO ca. 91/B Lutensol®AO 3109+3/+10EO 90 %,ca. 73/ELutensol®TO 2C13-Oxo alcohol+ 2 EO ca. 37/DLutensol®TO 3+ 3 EO ca. 40/E Lutensol®TO 5+ 5 EO ca. 62/E Lutensol®TO 6+ 6 EO ca. 67/E Lutensol®TO 65+6,5 EO ca. 68/D Lutensol®TO 7+7 EO ca. 70/E Lutensol®TO 79+7 EO90 %,ca. 70/E Lutensol®TO 8+8 EO ca. 60/A Lutensol®TO 89+8 EO90 %,ca. 60/A Lutensol®TO 10+10 EO ca. 70/A Lutensol®TO 109+10 EO85 %,ca. 70/A Lutensol®TO 11+11 EO ca. 70/B Lutensol®TO 12+12 EO ca. 75/B Lutensol®TO 129+12 EO85 %,ca. 75/B Lutensol®TO 15+15 EO ca. 80/B Lutensol®TO 20+20 EO ca. 86/B Lutensol®TO 389+3 /+8EO90 %,ca. 70/E Unless otherwise indicated, the product concentration is 100% Cloud point in °C according to EN 1890Method A: 1 g of surfactant + 100 g of dist. WaterMethod B: 1 g of surfactant + 100 g of NaCl solution (c = 50 g/l) Method C: 1 g of surfactant + 100 g of NaCl solution (c = 100 g/l) Method D: 5 g of surfactant + 45 g of butyldiglycol solution(c = 250 g/l)Method E: 5 g of surfactant + 25 g of butyldiglycol solution(c = 250 g/l)Lutensol®XP 30C10-Guerbet alcohol+ 3 EO ca. 31/ELutensol®XP 40+ 4 EO ca. 44/E Lutensol®XP 50+ 5 EO ca. 56/E Lutensol®XP 60+ 6 EO ca. 62/E Lutensol®XP 69+ 6 EO85 %,ca. 62/E Lutensol®XP 70+7 EO ca. 68/E Lutensol®XP 79+7 EO85 %,ca. 68/E Lutensol®XP 80+8 EO ca. 56/A Lutensol®XP 89+8 EO85 %,ca. 56/A Lutensol®XP 90+9 EO ca. 69/A Lutensol®XP 99+9 EO85 %,ca. 69/A Lutensol®XP 100+10 EO ca. 80/A Lutensol®XP 140+14 EO ca. 78/BLutensol®XL 40C10-Guerbet alcohol+ 4 EO ca. 43/ELutensol®XL 50alkoxylate+ 5 EO ca. 58/E Lutensol®XL 60+ 6 EO ca. 65/E Lutensol®XL 70+7 EO ca. 68/E Lutensol®XL 79+7 EO85 %,ca. 68/E Lutensol®XL 80+8 EO ca. 56/A Lutensol®XL 89+8 EO85 %,ca. 56/A Lutensol®XL 90+9 EO ca. 69/A Lutensol®XL 99+9 EO ca. 69/A Lutensol®XL 100+10 EO ca. 80/A Lutensol®XL 140+14 EO ca. 78/BLutensol®ON 30C10-Oxo alcohol+ 3 EO ca. 53/ELutensol®ON 50+ 5 EO ca. 67/E Lutensol®ON 60+ 6 EO ca. 36/A Lutensol®ON 66+6,5 EO ca. 53/A Lutensol®ON 70+7 EO ca. 60/A Lutensol®ON 80+8 EO ca. 80/A Lutensol®ON 110+11 EO ca. 78/B Lutensol®AP 6Alkylphenol+ 6 EO ca. 61/E Lutensol®AP 7+7 EO ca. 62/E Lutensol®AP 8+8 EO ca. 34/A Lutensol®AP 9+9 EO ca. 51/A Lutensol®AP 10+10 EO ca. 60/A Lutensol®AP 14+14 EO ca. 76/B Lutensol®AP 20+20 EO ca. 85/B Lutensol®FA 12Oleyl amine+12 EO ca. 86/B Lutensol®FA 12 K Coco amine+12 EO ca. 92/B Lutensol®FA 15 T Tallow amine+15 EO ca. 97/B Lutensol®FSA 10Oleic acid amine+10 EO ca. 85/E Lutensol®GD 70Alkyl polyglucoside70 %,>100/BLow-foaming nonionic surfactantsPlurafac®LF 120Fatty alcohol alkoxylate ca. 28/A Plurafac®LF 22095 %,ca. 42/A Plurafac®LF 22195 %,ca. 33/A Plurafac®LF 22398 %,ca. 33/E Plurafac®LF 224ca. 27/E Plurafac®LF 226ca. 28/A Plurafac®LF 300ca. 22/A Plurafac®LF 301ca. 32/E Plurafac®LF 303ca. 29/E Plurafac®LF 305ca. 38/E Plurafac®LF 400ca. 33/A Plurafac®LF 401ca. 74/A Plurafac®LF 403ca. 41/E Plurafac®LF 404ca. 45/E Plurafac®LF 40595 %,ca. 55/E Plurafac®LF 500ca. 32/E Plurafac®LF 600ca. 55/A Plurafac®LF 711ca. 45/E Plurafac®LF 1300ca. 21/E Plurafac®LF 1430Amine alkoxylate ca. 35/A Plurafac®SLF-18B4590 % Fatty alcohol alkoxylate 90 %,ca. 21/E Plurafac®LF 131Fatty alcohol alkoxylate, end-capped ca. 35/E Plurafac®LF 132ca. 30/E Plurafac®LF 231ca. 28/E Plurafac®LF 431ca. 39/E Pluronic®PE 3100PO–EO-block polymer10 % EO ca. 41/E Pluronic®PE 350050 % EO ca. 68/A Pluronic®PE 430030 % EO ca. 61/E Pluronic®PE 610010 % EO ca. 23/A Pluronic®PE 612012 % EO ca. 41/E Pluronic®PE 620020 % EO ca. 33/A Pluronic®PE 640040 % EO ca. 60/A Pluronic®PE 680080 % EO ca. 88/B Pluronic®PE 740040 % EO ca. 60/A Pluronic®PE 810010 % EO ca. 36/E Pluronic®PE 920020 % EO ca. 49/E Pluronic®PE 940040 % EO ca. 80/E Pluronic®PE 1010010 % EO ca. 35/E Pluronic®PE 1030030 % EO ca. 71/E Pluronic®PE 1040040 % EO ca. 81/A Pluronic®PE 1050050 % EO ca. 75/B Pluronic®PE 10500 Solution50 % EO,18 %,ca. 75/B Pluronic®RPE 1720EO-PO-block polymer20 % EO ca. 37/E Pluronic®RPE 174040 % EO ca. 51/E Pluronic®RPE 203535 % EO ca. 41/E Pluronic®RPE 252020 % EO ca. 31/E Pluronic®RPE 252525 % EO ca. 38/E Pluronic®RPE 311010 % EO ca. 25/E Tetronic®RED 9040Ethylene diamineEO- PO- block polymer40 % EO ca. 48/A AminopolyolQuadrol®L Ethylene diamine + 4 POPolyalkylene glykolsPluriol®A 010 R Allyl alcohol ethoxylatePluriol®A 11 RE Allyl alcohol alkoxylatePluriol®A 13 RPluriol®A 22 RPluriol®A 23 RPluriol®A 308 R Butyne-1,4-diol ethoxylatePluriol®A 350 E Methylpolyethylene glycol M 350 Pluriol®A 500 E M 500 Pluriol®A 750 E1)M 750 Pluriol®A 760 E M 750 Pluriol®A 1000 E M 1000 Pluriol®A 1020 E1)M 1000 Pluriol®A 2000 E M 2000 Pluriol®A 3010 E1)M 3000 Pluriol®A 5010 E1)M 5000 Pluriol®A 1000 PE Alkyl polyalkylene glykol M 1000 Pluriol®A 1320 PE1)M 1400 Pluriol®A 2000 PE M 2000 Pluriol®A 2020 PE1)M 2000 Pluriol®A 1350 P Alkyl polypropylene glykol M 1350 Pluriol®A 2000 P M 2000 Pluriol®A 3 TE Modified polyglycol ether M 275 Pluriol®A 15 TE M 800 Pluriol®A 15 TERC M 800 Pluriol®A 18 TERC M 900 1)non filtratedPluriol®E 200Polyethylene glycol M 200 Pluriol®E 2052)M 200 Pluriol®E 300M 300 Pluriol®E 3052)M 300 Pluriol®E 400M 400 Pluriol®E 4052)M 400 Pluriol®E 600M 600 Pluriol®E 6052)M 600 Pluriol®E 1000M 1000 Pluriol®E 1500 E M 1500 Pluriol®E 1500 Powder M 1500 Pluriol®E 1500 Flakes M 1500 Pluriol®E 1505 Flakes2)M 1500 Pluriol®E 3400 E M 3400 Pluriol®E 3400 Powder M 3400 Pluriol®E 3400 Flakes M 3400 Pluriol®E 3405 E2)M 3400 Pluriol®E 3405 Flakes2)M 3400 Pluriol®E 4000 E M 4000 Pluriol®E 4000 Powder M 4000 Pluriol®E 4000 Flakes M 4000 Pluriol®E 4005 E2)M 4000 Pluriol®E 4005 Flakes2)M 4000 Pluriol®E 6000 E M 6000 Pluriol®E 6000 Powder M 6000 Pluriol®E 6000 Flakes M 6000 Pluriol®E 6005 E2)M 6000 Pluriol®E 6005 Flakes2)M 6000 Pluriol®E 8000 E M 8000 Pluriol®E 8000 Flakes M 8000Pluriol®E 8005 E2)M 8000 Pluriol®E 8005 Flakes2)M 8000 Pluriol®E 9000 Powder M 9000 Pluriol®E 9000 Fine Powder M 9000 Pluriol®E 9000 Flakes M 9000 Pluriol®P 400Polypropylene glycol M 430 Pluriol®P 600M 600 Pluriol®P 900M 900 Pluriol®P 2000M 2000 Pluriol®P 4000M 4000 2)Care - QualityReactive SolventsPluriol®BP 30 E Bisphenol A+ 3 EOPluriol®BP 40 E+ 4 EOPluriol®BP 60 E+ 6 EOPluriol®BP 100 E+ 10 EOEmulsifiersEmulan®A Oleic acid ethoxylate ca. 52/E Emulan®AF Fatty alcohol ethoxylate ca. 65/E Emulan®AT 9ca. 68/A Emulan®EL Castor oil ethoxylate97 %,ca. 71/B Emulan®EL 40ca. 72/E Emulan®ELH 6090 %,ca. 85/B Emulan®EL 200 Powder> 100/A Emulan®ELP ca. 51/E Emulan®LVA Oxo alcohol ethoxylate85 %,ca. 56/A Emulan®NP 3070Alkylphenol ethoxylate70 %,ca. 90/B Emulan®OC Fatty alcohol ethoxylate ca. 90/B Emulan®OC Solution30 %,ca. 90/B Emulan®OG ca. 92/B Emulan®OK 5ca. 62/E Emulan®OP 25Alkylphenol ethoxylate ca. 88/B Emulan®OU Fatty alcohol ethoxylate ca. 90/B Emulan®P ca. 52/E Emulan®PO Alkylphenol ethoxylate ca. 46/EEmulan®TO 2080C13-Oxo alcohol ethoxylate80 %,ca. 93/BEmulan®TO 307070 %,ca. 91/B Emulan®TO 407070 %,ca. 91/B Emulan®XCA 23Polyisobutene derivative70 % Emulphor®OPS 25Alkylphenol ether sulfate, sodium salt34 % Emulphor®NPS 2531 % Emulphor®FAS 30Fatty alcohol ether sulfate, sodium salt30 % SolubilizerEmulan®HE 50Alcohol ethoxylate ca. 72/B Emulan®EL S104Fatty alcohol alkoxylate ca. 56/E Ionic surfactantsLutensit®A-BO Dioctylsulphosuccinate, sodium salt60 % Lutensit®A-EP Acid phosphoric esterLutensit®A-ES Alkylphenol ether sulphate, 40 %sodium saltLutensit®A-FK Fatty acid condensation product,sodium salt55 % Lutensit®A-LBA Dodecylbenzenesulphonate, amine salt55 % Lutensit®A-LBS Dodecylbenzenesulphonic acid98 % Lutensit®A-PS Alkylsulphonate, sodium salt60 %Lutensit®AN 10Anionic/nonionic surfactant combinationbased on an alkylphenol ethoxylateLutensit®AN 30Anionic/nonionic surfactant combinationbased on a fatty alcohol ethoxylateLutensit®AN 40Mixture of nonionic surfactants andalkylcarboxylic acids70 % Lutensit®AN 45Mixture of nonionic surfactants andalkylcarboxylic acids80 % Lutensit®AN 50Anionic/nonionic surfactant combinationbased on a fatty alcohol ethoxylateNekal®BX Dry Alkylnaphthalenesulfonate, sodium salt68 %Nekal®BX Dry Paste60 %Nekal®BX Conc. Paste 40 %34 %Nekal®BX 30%22 %Nekal®BX Conc. Paste60 %Nekal®SBC Alkylnaphthalenesulphonic acid72 %Foam suppressorsDegressal®SD 20Fatty alcohol alkoxylateDegressal®SD 21Degressal®SD 22Degressal®SD 23Alkohol alkoxylateDegressal®SD 30Carbonylic esterDegressal®SD 40Phosphoric esterDispersing agentsPolycarboxylateSokalan®CP 5Maleic acid/Acrylic acid copolymer,sodium salt M 70 00040 % Sokalan®CP 5 Granules M 70 00092 % Sokalan®CP 5 Powder G M 70 00092 % Sokalan®CP 453)M 70 00045 % Sokalan®CP 45 Granules3)M 70 00092 % Sokalan®CP 7M 50 00040 % Sokalan®CP 7 Granules NL M 50 00092 % Sokalan®CP 9Maleic acid/olefin copolymer,sodium salt M 12 00025 % Sokalan®CP 9 Granules87 % Sokalan®CP 10Modified Polyacrylic acid,sodium salt M 4 00045 % Sokalan®CP 10 S Modified Polyacrylic acid M 4 00050 % Sokalan®CP 12 S M 3 00050 % Sokalan®CP 13 S M 20 00025 % Sokalan®PA 15Polyacrylic acid, M 1 20045 %sodium saltSokalan®PA 15 CL M 1 20045 % Sokalan®PA 20M 2 50045 % Sokalan®PA 20 PN3)M 2 50054 % Sokalan®PA 25 CL M 4 00045 % Sokalan®PA 25 CL Granules M 4 00092 % Sokalan®PA 25 CL PN3)M 4 00049 % Sokalan®PA 30M 8 00045 % Sokalan®PA 30 CL M 8 00045 % Sokalan®PA 30 CL Granules M 8 00092 % Sokalan®PA 30 CL PN48 % Sokalan®PA 30 CL PN Granules93 %please turn overSokalan®PA 40M 15 00035 % Sokalan®PA 40 Powder M 15 00092 % Sokalan®PA 70 PN3)M 70 00030 % Sokalan®PA 80 S Polyacrylic acid M 100 00035 % Sokalan®PA 110 S M 250 00035 % Special polymersSokalan®HP 22 G Nonionic copolymer M 24 00020 % Sokalan®HP 25Modified polycarboxylate M 3 00045 % Sokalan®HP 165Polyvinylpyrrolidone M 9 00030 % Sokalan®HP 50M 40 00095 % Sokalan®HP 53M 40 00030 % Sokalan®HP 53 K M 40 00030 % Sokalan®HP 56Vinylpyrrolidon/Vinylimidazolcopolymer M 70 00030 % Sokalan®HP 56 Granules M 70 00095 % Sokalan®HP 59Polyvinylpyrrolidon M 500 00045 % Sokalan®HP 60M 1 000 00020 % Sokalan®HP 66Vinylpyrrolidon/VinylimidazolCopolymer modified41 % Sokalan®AF PolyetherSokalan®DCS Mixture of dicarboxylic acidsSokalan®PM 10 I Maleic acid copolymer, M 4 00044 %sodium saltSokalan®PM 15 I Modified polycarboxylate, 40 %sodium saltSokalan®PM 70M 4 00040 % Sokalan®SR 100Esterified polyether3)= partly neutralizedSulphonic acid condensation product/Sulfonates Tamol®NH 7519Naphthaline sulphonic acid condensation 95 % Tamol®NN 2406product, sodium salt21 % Tamol®NN 290131 % Tamol®NN 450145 % Tamol®NN 771895 % Tamol®NN 890695 % Tamol®NN 910495 % Tamol®NN 940195 % Tamol®PP Phenol sulphonic acid condensation,95 % Tamol®DN product, sodium salt95 % PolyethyleneiminesLupasol®FG Polyethylenimine M 80099 % Lupasol®FC M 80050 % Lupasol®G 20 waterfree M 1 30099 % Lupasol®G 20M 1 30050 % Lupasol®PR 8515M 2 00099 % Lupasol®G 35M 2 00050 % Lupasol®G 100M 5 00050 % Lupasol®WF M 25 00099 % Lupasol®HF M 25 00056 % Lupasol®G 500M 25 00040 % Lupasol®P M 750 00050 % Lupasol®PS M 750 00033 % Lupasol®PO 100M 5 00050 % Lupasol®HEO 1M 13 00080 % Lupasol®PN 50M 1 000 00050 % Lupasol®SK M 2 000 00024 %Chelating agentsTrilon®AS Nitrilotriacetic acid (NTA)99 %Trilon®A 92 R Trisodium salt of NTA92 %Trilon®A liquid40 %Trilon®BS Ethylenediaminetetraacetic acid (EDTA)99 %Trilon®B-A-T liquid Triammonium salt of EDTA50 %Trilon®B Powder Tetrasodium salt of EDTA87 %Trilon®BX Powder83 %Trilon®B liquid40 %Trilon®BX liquid40 %Trilon®BD Disodium salt of EDTA89 %Trilon®BVT Chelating agent with highspecification for iron (III)21 %Trilon®C liquid Pentasodium salt ofDiethylenetriaminepentaacetic acid (DTP)40 %Trilon®C liquid 50%50 %Trilon®D liquid Trisodium salt of Hydroxyethyl-ethylenediaminetriacetic acid (HEDTA)40 %Trilon®M liquid Trisodium salt of Methylglycinediacetic 40 %acid (MGDA)Trilon®M Powder83 %Trilon®M Granules73 %Trilon®P Liquiol Modified anionic Polyamine40 % Biocide% Protectol®BN2-Bromo-2-nitropropane-1,3-diol 99(Bronopol)Protectol®BN 3030 % Protectol®BN 1818 % Protectol®GA 50Glutaraldehyde50 % Protectol®GA 2424 % Protectol®PE Phenoxyethanol99 % Protectol®PE S99 % Protectol®PP Phenoxypropanol99 % Protectol®GL Glyoxal40 % Protectol®HT Hexahydrotriazine derivate76 % Protectol®TD Tetramethylolacetylene diurea47 % Protectol®DF Dimethoxytetrahydrofurane99 % Protectol®DZ Thiadiazin derivate99 % Protectol®DZ P99 % Protectol®DA2,4-Dichlorbenzyl alkohol98 % Protectol®DA S98 % Corrosion inhibitorsKorantin®BH solid2-Butine-1,4-diol> 98 % Korantin®BH 50> 50 % Korantin®LUB Acid phosphoric ester of a polyetherKorantin®MAT Alkanolamine salt of a nitrogenious, organic acidKorantin®PAT80 % Korantin®PM Propargylalcohol alkoxylate99,5 % Korantin®PP67 % Korantin®SMK Phosphoric monoesterWaxesPolyethylene waxesLuwax®A Ethylene homopolymer waxes withLuwax®AH 3different densities and molar massesLuwax®AH 6Luwax®AL 3Luwax®AL 61Luwax®AM 3Luwax®AM 6Luwax®AF 29Micronized polyethylene waxes withLuwax®AF 30different particle size distributionLuwax®AF 31Luwax®AF 32Luwax®PE 10 MLuwax®OA Oxidized polyethylene waxes, emulsifiableLuwax®OA 2Luwax®OA 3Luwax®OA 5Luwax®ES 9696Luwax®ES 9698Luwax®EVA 1Copolymer polyethylene waxesLuwax®EVA 3Luwax®EAS 3Luwax®EAS 4Luwax®EAS 5Polyether waxLuwax®V Polyvinyl ether waxMontanwaxesLuwax®S Montanic acid waxesLuwax®LSLuwax®E Montanic ester waxesLuwax®LGLuwax®LGE Montanic ester waxes, contains emulsifierLuwax®OP Partially saponified montanic ester waxWax emulsionsPoligen®WE 1Polyethylene wax emulsions35 % Poligen®WE 325 % Poligen®WE 421 % Poligen®WE 635 % Poligen®WE 739 % Poligen®WE 8 BW35 % Poligen®ES 9100235 % Poligen®ES 9100540 % Poligen®ES 9100920 %Specialty chemicals for the electroplatingand electronics industriesEspecially for formulators of the electroplating and printed circuit board industry the following products are offered:Golpanol®ALS Allyl sulfonate25 % Golpanol®ALS 3535 % Golpanol®ATPN Carboxyethylisothiuronium betaine> 98 % Golpanol®BEO Butyne diol ethoxylateGolpanol®BMP Butyne diol propoxylateGolpanol®BOZ Crystals Butyne diol> 98 % Golpanol®DEP Diethylaminopropyne97,5 % Golpanol®HD Hexyne diol80 % Golpanol®MPA Dimethylpropinylamine89 % Golpanol®PA Propargyl alcohol99,3 % Golpanol®PAP Propargyl alcohol propoxylate67 % Golpanol®PME Propargyl alcohol ethoxylateGolpanol®PS Propyne sulphonate20 % Golpanol®VS Vinyl sulphonate25,5 % Lugalvan®ANA Anisaldehyde> 98,5 % Lugalvan®BNO 12ß-Naphtol ethoxylate99 % Lugalvan®BNO 2475 % Lugalvan®BPC 48Benzylpyridinium carboxylate48 % Lugalvan®DC Aqueous dispersion of an ethylene copolymer21 % Lugalvan®EH 158Ethylhexanol ethoxylate80 % Lugalvan®G 15000Polyethyleneimine50 % Lugalvan®G 2050 % Lugalvan®G 3550 % Lugalvan®HS 1000Thiodiglykol ethoxylate> 98 % Lugalvan®IMZ Imidazole> 99,5 % Lugalvan®IZE Reaction product of imidazole45 %and epichlorohydrineLugalvan®NES Sodium salt of a sulphonatedalkylphenol ethoxylate40 % Basotronic®PVI Polyvinylimidazole, quarternized44 % Basotronic®PYR Pyrrole (electronic grade)> 99,9 % Lutron®HF 1Modified polyglykol etherLutron®HF 3Lutron®HF 8Mixture of varous alkoxylates, stabilizedLutron®KS 1Modified PolyglykoletherLutron®WF 20 DLutron®WF 21Lutron®WF 21 D Modified Polyglykolether, stabilizedLutropur®FEG 28Formaldehyde (electronic grade)28 % Lutropur®MSA Methanesulfonic acid (electronic grade)70 % Lutropur®Q 75Ethylendiamine + 4 PO75 % Lutropur®Q Ethylendiamine + 4 PO。
UPLC-MS
UPLC-MS/MS法同时快速测定保健食品中10种降压类非法添加化学药王晓峰，许琨琨，卢文斌，吴芳海，蔡振世*，林晓明（泉州市食品药品检验所，福建泉州 362000）摘 要：目的：建立同时测定保健食品中10种降压类非法添加化学药的UPLC-MS/MS快速检测方法。
方法：液相采用ACQUITY UPLC®BEH C18（2.1 mm×100 mm，1.7 μm）柱，以超纯水（含0.1%甲酸）-乙腈（0.1%甲酸）为流动相，进行梯度洗脱，进样量2 μL，流速0.3 mL·min-1，柱温30 ℃。
质谱采用ESI，正、负离子多反应监测模式，进行定性分析和定量分析。
结果：盐酸普萘洛尔、酒石酸美托洛尔、艾司洛尔、比索洛尔、坎地沙坦、厄贝沙坦、替米沙坦、氯沙坦、缬沙坦和吲达帕胺的分离度良好，线性范围内相关性均较好，R2均大于0.996 3；平均回收率为93%～118%；RSD为1.4%～4.9%（n=6）；方法检出限为0.10～5.00 μg·kg-1；方法定量限为0.30～15.00 μg·kg-1；单次分析仅需12 min。
结论：该方法操作便捷、检测时间短、灵敏度高、结果准确，适用于保健食品中10种降压类非法添加化学药的快速筛查及定量检测。
关键词：UPLC-MS/MS；保健食品；降压类药物Simultaneous and Rapid Determination of 10 illegally Added Antihypertensive Chemicals in Health Food by UPLC-MS/MS WANG Xiaofeng, XU Kunkun, LU Wenbin, WU Fanghai, CAI Zhenshi*, LIN Xiaoming(Quanzhou Institute for Food And Drug Control, Quanzhou 362000, China) Abstract: Objective: To establish a UPLC-MS/MS rapid detection method for simultaneously determining 10 illegally added chemical antihypertensive drugs in health foods. Method: ACQUITY UPLC®BEH C18( 2.1 mm×100 mm, 1.7 μm) column was used in the liquid phase with ultrapure water (containing 0.1% formic acid)-acetonitrile (0.1% formic acid) as the mobile phase for gradient elution, the injection volume was 2 μL, flow rate was 0.3 mL·m in-1, and column temperature was 30 ℃. The mass spectrometry was performed by ESI, positive/negative ion multiple reaction monitoring mode for qualitative and quantitative analysis. Result: The separation degree of propranolol, metoprolol, amlodipine, bisoprolol, candesartan, irbesartan, telmisartan, losartan, valsartan, and indapamide was good, and the linear range correlations were good, all R2 values were greater than 0.996 3. The average recovery rate was 93%～118%. RSD was 1.4%～4.9% (n=6). The LOD was between 0.10～5.00 μg·kg-1, and the LOQ was between 0.30～15.00 μg·kg-1. A single analysis only requires 12 min. Conclusion: The method is simple to operate, has short detection time, high sensitivity, and accurate results, and it is suitable for the rapid screening and quantitative detection of 10 illegally added chemical antihypertensive drugs in health foods.Keywords: UPLC-MS/MS; health food; antihypertensive drugs随着近年来我国经济的迅速发展，人们的生活质量得到了很大提高，同时老年人口不断增加，导致出现越来越多的高血压患者，市场上也出现了越来越多的辅助降压类保健食品。
诺力昂Trigonox 121产品说明书
产品数据表Trigonox 121tert-Amyl peroxy-2-ethylhexanoateTrigonox® 121是在高温下固化不饱和聚酯树脂的高效酯。
CAS 编号686-31-7EINECS/ELINCS编号211-687-3TSCA 状态清单上列出的分子量230.3规格活性氧 6.60-6.95 %含量≥ 95.0 %色度≤ 20 Pt-Co[label translation not set]≤ 0.10 %无机+有机可水解氯≤ 100 mg/kg特性外观透明液体应用Trigonox® 121 可用于细分市场：聚合物生产、热固性复合材料和丙烯酸树脂生产，具有不同的应用/功能。
如需更多信息，请查看我们的网站和/或联系我们。
热稳定性有机过氧化物是热不稳定物质，可发生自加速分解。
自加速分解温度（SADT）是一种物质在其用于运输的包装中可能产生自加速分解的最低温度。
SADT根据热积累储存试验测定。
SADT35°C紧急温度 (Tₑ)25°C控制温度 (Tc)20°C方法热累积储存试验是公认的用于测定有机过氧化物SADT的测试方法（见《关于危险货物运输的建议书·试验和标准手册》– 联合国，纽约和日内瓦）。
存储由于有机过氧化物的相对不稳定性，随着时间的流逝会有一定的质量损失。
为了使质量损失最小化，诺力昂建议每种有机过氧化物的最高储存温度（最高储存温度）。
最高储存温度5°C注意在建议的条件下存储时，Trigonox® 121会在交付后至少3个月内保持在诺力昂产品规格范围内。
包装和运输标准包装为30公升HDPE桶(Nourytainer®)，装25公斤过氧化物产品。
包装和运输符合国际法规。
关于其它定量包装的可用性，请联系诺力昂公司销售代表。
Trigonox® 121 属D类有机过氧化物；液体，需控制温度，级别5.2；UN3115。
特斯拉模型3用户手册.pdf_1703336468.7659264说明书
Product Data SheetTrigonox B-C30Di-tert-butyl peroxide, 30% solution in isododecaneTrigonox® B-C30 is an efficient initiator (30% active ingredient in odorless mineral spirits) for the production of Low Density Polyethylene (LDPE). It is used for both tubular and autoclave processes. In most cases a combination with other peroxides is used to ensure a broad reactivity range CAS number110-05-4EINECS/ELINCS No.203-733-6TSCA statuslisted on inventoryMolecular weight146.2Active oxygen contentperoxide10.94%Concentration3.17-3.39%SpecificationsAppearance Clear liquidAssay29.0-31.0 %Color≤ 30 Pt-CoHydroperoxides as TBHP≤ 0.03 %CharacteristicsDensity, -10 °C0.810 g/cm³ApplicationsTrigonox® B-C30 is an efficient initiator for the production of Low Density Polyethylene (LDPE). It is used both for tubular and autoclave processes. In most cases a combination with other peroxides is used to ensure a broad reactivity range.Half-life dataThe reactivity of an organic peroxide is usually given by its half-life (t1/2) at various temperatures. For Trigonox® B-C30 in chlorobenzene half-life at other temperatures can be calculated by using the equations and constants mentioned below:0.1 hr at 164°C1 hr at 141°C10 hr at 121°CFormula 1kd = A·e-Ea/RTFormula 2t½ = (ln2)/kdEa153.46 kJ/moleA 4.20E+15 s-1R8.3142 J/mole·KT(273.15+°C) KThermal stabilityOrganic peroxides are thermally unstable substances which may undergo self-accelerating decomposition. The lowest temperature at which self-accelerating decomposition may occur with a substance in the packaging as used for transport is the Self-Accelerating Decomposition Temperature (SADT). The SADT is determined on the basis of the Heat Accumulation Storage Test.Method The Heat Accumulation Storage Test is a recognized test method for thedetermination of the SADT of organic peroxides (see Recommendations on theTransport of Dangerous Goods, Manual of Tests and Criteria - United Nations, NewYork and Geneva).StorageDue to the relatively unstable nature of organic peroxides, a loss of quality will occur over a period of time. To minimize the loss of quality, Nouryon recommends a maximum storage temperature (Ts max. ) for each organic peroxide product.Ts max.40°CNote When stored according to these recommended storage conditions, Trigonox® B-C30 will remain within the Nouryon specifications for a period of at least 3 monthsafter delivery.Packaging and transportThe standard packaging is a 1000 l composite Intermediate Bulk Container (IBC). Delivery in a 20 m3 Nouryon tank container is also possible in a number of countries. Both packaging and transport meet the international regulations. For the availability of other packed quantities consult your Nouryon representative. Trigonox® B-C30 is classified as Organic peroxide type F; liquid, Division 5. 2; UN 3109.Safety and handlingKeep containers tightly closed. Store and handle Trigonox® B-C30 in a dry well-ventilated place away from sources of heat or ignition and direct sunlight. Never weigh out in the storage room. Avoid contact with reducing agents (e. g. amines), acids, alkalis and heavy metal compounds (e. g. accelerators, driers and metal soaps). Please refer to the Safety Data Sheet (SDS) for further information on the safe storage, use and handling of Trigonox® B-C30. This information should be thoroughly reviewed prior to acceptance of this product. The SDS is available at /sds-search.Major decomposition productsAcetone, Methane, tert-ButanolAll information concerning this product and/or suggestions for handling and use contained herein are offered in good faith and are believed to be reliable.Nouryon, however, makes no warranty as to accuracy and/or sufficiency of such information and/or suggestions, as to the product's merchantability or fitness for any particular purpose, or that any suggested use will not infringe any patent. Nouryon does not accept any liability whatsoever arising out of the use of or reliance on this information, or out of the use or the performance of the product. Nothing contained herein shall be construed as granting or extending any license under any patent. Customer must determine for himself, by preliminary tests or otherwise, the suitability of this product for his purposes.The information contained herein supersedes all previously issued information on the subject matter covered. The customer may forward, distribute, and/or photocopy this document only if unaltered and complete, including all of its headers and footers, and should refrain from any unauthorized use. Don’t copythis document to a website.Trigonox is a registered trademark of Nouryon Functional Chemicals B.V. or affiliates in one or more territories.Contact UsPolymer Specialties Americas************************Polymer Specialties Europe, Middle East, India and Africa*************************Polymer Specialties Asia Pacific************************2023-3-22© 2023Polymer production Trigonox B-C30。
异氰尿酸三缩水甘油酯
异氰尿酸三缩水甘油酯张 亨1 张汉宇2（1.锦西化工研究院有限公司， 葫芦岛, 125000；2. 北京卫星制造厂有限公司，北京, 100094）摘 要：介绍了异氰尿酸三缩水甘油酯的理化性质、晶体结构、光谱性质、毒性、质量标准、应用和发展概况，综述了国内外异氰尿酸三缩水甘油酯的合成工艺和生产工艺研究进展。
关键词：异氰尿酸三缩水甘油酯 合成 生产 工艺 研究 进展doi ：10.3969/j.issn.1672-6294.2020.02.003Triglycidyl IsocyanurateZhang Heng 1 Zhang Hanyu 2(1. Jinxi Chemical Research Institute Co., Ltd., Huludao 125000；2. Beijing Spacecrafts, Beijing, 100094)Abstract: In this paper, we introduced the physico chemical properties, spectroscopic properties, crystalstructure, toxicity, application, quality standards and development of triglycidyl isocyanurate (TGCI) and reviewed the progress in the synthesis and production of TGCI at home and abroad.Keywords:triglycidyl isocyanurate (TGCI); synthesis; production; technology; research; progress 收稿日期：2019-07-04异氰尿酸三缩水甘油酯[1-3]或称异氰脲酸三缩水甘油酯（TGIC ），是一种含有多功能的笼式三嗪环结构的新型环氧树脂，广泛用于聚酯树脂或丙烯酸树脂粉末涂料等的交联固化剂。
碧云天-总一氧化氮检测试剂盒说明书
总一氧化氮检测试剂盒产品简介：总一氧化氮检测试剂盒(Total Nitric Oxide Assay Kit, 即Nitrate/Nitrite Assay Kit)采用了硝酸盐还原酶(Nitrate reductase)还原硝酸盐(nitrate)为亚硝酸盐(nitrite)，然后通过经典的Griess reagent检测亚硝酸盐，从而测定出总一氧化氮。
一氧化氮本身极不稳定，在细胞内很快代谢为硝酸盐(Nitrate)和亚硝酸盐(Nitrite)，通过上述方法检测出硝酸盐和亚硝酸盐的总量，就可以推算出总的一氧化氮的量。
本试剂盒采用了NADPH依赖性硝酸盐还原酶(NADPH dependent nitrate reductase)。
高浓度的NADPH会干扰后续的检测，消除NADPH的一种常用方法就是使用Lactate dehydrogenase (LDH)清除NADPH。
本试剂盒采用了LDH清除NADPH的方法，使检测结果更加准确。
对亚硝酸盐的检测下限达到2微摩尔/升，在2-80微摩尔/升的范围内有很好的线性关系。
浓度过高的样品可以适当稀释后再进行检测。
样品范围广，可以检测细胞裂解液、组织裂解液、细胞或组织的培养液、血清、血浆或尿液等中一氧化氮的含量。
酚红和10%血清对测定无明显干扰。
样品需要量少。
根据样品中一氧化氮的浓度不同，仅需0-60微升样品。
检测速度快，仅需约80分钟即可完成检测。
本试剂盒采用了间接的一氧化氮检测方法，如需检测细胞内实际的一氧化氮水平，可以采用碧云天生产的DAF-FM DA (NO荧光探针)(S0019)。
保存条件：-20℃保存，一年有效。
NADPH，Nitrate Reductase，NaNO2 (1M)，Griess Reagent I 和Griess Reagent II需避光保存。
NADPH配制成溶液后必须分装并-70℃保存。
注意事项：RPMI 1640等含有较高浓度硝酸盐的培养液容易对本试剂盒的检测产生干扰，请尽量避免。
硝酸脲化学品安全技术说明书MSDS
硝酸脲化学品安全技术说明书编码：MSDS#18编制日期：_____________中文名称：硝酸脲中文别名：无资料英文名称：urea nitrate英文别名：urea mononitrate CAS号：124-47-0技术说明书编码：MSDS#18第二部分：危险性概述危险性类别：第1类 爆炸品侵入途径：吸入 食入健康危害：本品具有刺激作用，热解能放出有毒的氮氧化物气体。
环境危害：无资料操作注意事项：程。
建议操作人员佩戴自吸过滤式防尘口罩，戴化学安全防护眼镜，戴防化学品手套。
远离火种、热源，工作场所严禁吸烟。
使用防爆型的通风系统和设备。
远离易燃、可燃物。
避免产生粉尘。
避免与氧化剂接触。
搬运时要轻装轻卸，防止包装及容器损坏。
禁止震动、撞击和摩擦。
配备相应品种和数量的消防器材及泄漏应急处理设备。
储存注意事项：储存于阴凉、干燥、通风的专用爆炸品库房。
远离火种、热源。
包装密封。
应与氧化剂、易（可）燃物等分开存放，切忌混储。
采用防爆型照明、通风设施。
禁止使用易产生火花的机械设备和工具。
储区应备有合适的材料收容泄漏物。
禁止震动、撞击和摩擦。
第八部分：接触控制/个体防护中国MAC(mg/m3)：未制定标准前苏联MAC(mg/m3)：未制定标准TLVTN：未制定标准TLVWN：未制定标准接触限值：美国TLV-TWA：未制订标准美国TLV-STEL：未制订标准其它理化性质：无资料第十部分：稳定性和反应活性 稳定性：稳定禁配物：强氧化剂、易燃或可燃物、硫、磷。
避免接触的条件：受热。
聚合危害：不能出现分解产物：无资料第十一部分：毒理学信息急性毒性：LD50：无资料 LC50：无资料亚急性和慢性毒性：无资料RTECS：无资料运输注意事项：运输时必须经公安机关批准，凭准运证方可起运。
铁路运输时应严格按照铁道部《危险货物运输规则》中的危险货物配装表进行配装。
货车编组，应按照《车辆编组隔离表》进行。
起运时包装要完整，装载应稳妥。