阿科过滤器用户使用手册

合集下载

高效压缩空气过滤器Parker说明书

●Atmospheric Dirt ●Rust ●pipescale●Water Vapour ●Condensed Water ●Water Aerosols●Liquid Oil ●Oil Aerosols ●Oil Vapour●Micro – organismsCompressed air is an important source of energy in today’s modern production factories because it isflexible and reliable.1[[Contaminants are ever present in the atmosphere. The compressed air stream typically contains water, oil, dirt and micro-organisms which can contribute to product rejects, lost production time and increased maintenance expenses. For example, small traces of impurities can cause serious sheye blemishing in automotive nishing operations. Water left in air stream can freeze during exposure to cold temperatures, blocking ow or rupturing pipes. Residual compressor oil and water can form an acidic sludge and therefore, compressed air contaminants will eventually, lead to premature component wear, needing repairs or replacements.Most problems experienced by compressed air users derive from contamination that already in the compressed air system.There are typically 10 different contaminants. These are coming from four different sources:Before compressed air can be ef ciently used, these contaminants need to be removed orreduced to acceptable levels.Parker EcoPure Plus compressed air filter● Air flow from 0.6m 3/min to 40m 3/min ●Filter housings from 1/4” BSPP to 3” BSPP connections● Operate at pressures from 1 bar g to 16 bar g ● Technically advanced and proven technology ●Patented, unique element interface for high efficiency filter performance● Filter element performance guaranteed for 12 months * ●Air quality performance tested in accordance with ISO8573* - If used in accordance with manufacturer’s instructionsParker Hanni n, the global leader in motion and control technologies, carries a stable of strong known brands in the eld of compressed air treatment. Parker EcoPure Plus is our latest addition to this family and continues to offer a perfect high value solution to compressed air puri cation.The Parker EcoPure Plus range lter is designed by Parker’s highly trained team of lter experts with advanced and proven compressed air puri cation technology. It combines the key essential elements of Parker’s total ltration knowledge, pooled over decades of lter manufacturing experience to ensure clean compressed air with the minimum of cost.2Compressed air is expensive to produce and must be properly treated in order to limit maintenance costs,downtime and spoilage.[[3Filter PerformanceParker EcoPure Plus - Embodying the The Parker EcoPure Plus series of compressed air lters, inherits many characteristics of Parker’s compressed air ltration technology. Yes, this is Parker EcoPure Plus - an innovation in compressed air ltration, designed with reliability & ef ciency for you.Parker EcoPure Plus amasses decades of Parker's design experience in compressed air lters, drawing out the most perfect high value solution to compressed air puri cation. Most importantly, Parker EcoPure Plus delivers consistent high quality compressed air.In a comparative test of Parker EcoPure Plus lters against ve commonly available alternative lters, the blockage characteristics and the true differential pressure of each lter re ects its superior performance.Essence of Compressed Air Filters4Proven technology means Reliability & EfficiencyMaintaining air quality and energy efficiency through regular maintenanceParker EcoPure Plus lters carry air ow from the inside out; a long understood and proven method. Liquid contaminants are captured in the lter matrix and collect together into larger and larger droplets through collisions with the media. These droplets eventually coalesce on the outside of the lter tube where they collect and are drained away by gravity.The inner element surface acts as a pre- lter to remove large contaminants while the internal pores are trap and to remove aerosols and solids from the air stream. The larger outside pores also allow a smooth air stream to pass freely through the media, minimizing pressure drop.Another important relationship is the gap between the lter element outside diameter and the lter bowl's inner diameter. The spacing between these two surfaces are sized so that air velocity is minimized, thus reducing the possibility of oil or water vapor carryover.It has long been the practice to change lter elements based upon the pressure drop measured across the lter as this directly contributes to increased operational costs. However, one must remember the reason for installing the lter in the rst place, i.e. to achieve high quality compressed air.Filter elements must always be replaced in accordance with the manufacturers instructions to ensure the delivered air quality is never compromised.Parker EcoPure Plus- Feature The zero-loss drain (standard forltration grades GP & HE) features an auto-cleaning protection screen for highest reliability. Simply press the drain to verify its correct operation.As the clean air exits the element, outlet air stabilizers direct the air out of the lter housing with the minimum of turbulence andpressure loss. These also ensure the element is located correctly within the lter bowl.The differential pressureindicator gives a visualindication on the current state of the lter element.(option)To maintain your guaranteed air quality, lter elements must be replaced every year with genuine Parker parts. Throughout its life, the lter element is constantly under bombardment from oily, acidic condensate and high velocity dirt particles, which needs to be removed and retained to protect your compressed air system.5Surface ProtectionAll sizes of housings are built to the highest quality standards, featuring our unique surface protectiontreatment, applied to both the inside and the outside of the lter housing. Thanks to the attention of quality surface treatment, Parker EcoPure Plus can withstand even the toughest industrial conditions and comes with a 5 year guarantee on the lter housings.Filtration MediaModern coalescing lters use a graded porosity lter medium with ne glass bers in the interior and larger bers on both the inside and outside surfaces. Parker EcoPure Plus elements have 8 to 10μm pores on the inner surface, reducing to 0.5 μm pores in the interior of the element, and widening to 40 to 80μm pores on the outer surface.Coalescing ElementsThis coalescing element is made with Parker’s special UNI-CAST construction. Composing an epoxy saturated, borosilicate glass micro- ber media, this media is used in applications requiring the removal of liquid and particulate contamination. The outer synthetic fabric layer allows swift removal of coalesced liquids.6minimum clearanceCompressed Air Standards and ApplicationsFrom aeration in pharmaceutical and chemical processes to pneumatic power systems, the possibilities for applications are endless. Parker has some suggested air cleanliness standards that may ﬁt your needs.International Standard ISO8573-1 has become the industry standard method for specifying compressed air cleanliness. The following diagrams describe various systems in terms of their corresponding ISO classiﬁcation.The applications are based upon the test result of GP-060-FX, HE-060-FX and AC-060-MX.Product SelectionStated ﬂows are for operation at 7 bar g (100 psi g) with reference to 20°C, 1 bar a, 0% relative water vapour pressure.For ﬂows at other pressures apply the correction factors shown.Correction FactorsFilter Coding ExamplesTo correctly select a ﬁlter model, the ﬂow rate of the ﬁlter must be adjusted for the minimum operating pressure of the system 1. Obtain the minimum operating pressure and maximum compressed air ﬂow rate at the inlet of the ﬁlter.2. Select the correction factor for minimum operating pressure from the CFP table (always round down e.g. for 5.3 bar, use 5 bar correction factor)3. Calculate the minimum ﬁltration capacity Minimum Filtration Capacity = Compressed Air Flow Rate x CFP4. Using the minimum ﬁltration capacity, select a ﬁlter model from the ﬂow rate tables above (ﬁlter selected must have a ﬂow rate equal to or greater than the minimum ﬁltration capacity)Filtration GradesGrade GP ﬁlters are used as pre-ﬁlters for Grade HE to remove gross amounts ofparticle, water and oil aerosols.Grade GPGrade HEGrade ACAdsorption Element(removal of vapor and odor)9(Precede with Grade GP ﬁlter) Grade HE ﬁlters are used when “total removal of particle, water and oil aerosols” is required. Because of its overall performancecharacteristics, this grade is most often recommended.(Precede with Grade HE ﬁlter) Grade AC are used to remove oil vapor and odor. It is used to remove smell or taste ofcompressor lube oil, as well as trace amounts of oil vapour in the compressed air stream.Weights and DimensionsAccessories1. Tested per ISO 8573.2.2. Oil vapor removal efﬁciency is given for AC media.Differential Pressure Gauge Float Drain Manual Drain10Europe domnick hunter IndustrialDukesway, Team Valley Trading Estate Gateshead, Tyne & Wear England NE11 0PZT +44 (0) 191 402 9000, F +44 (0) 191 482 Compressed Air TreatmentParker Gas SeparationsOude Kerkstraat 4P O Box 2584870 AG Etten-Leur, NetherlandsT +31 76 508 5300, F +31 76 508 5333Hiross ZanderPadova Business UnitStrada Zona Industriale 435020 S. Angelo di Piove Padova, Italy T +39 049 9712 111, F +39 049 9701 Hiross ZanderEssen Business UnitZander Aufberaitungstechnik GmbH Im Teelbruch 118D-45219 Essen, GermanyT +49 2054 9340, F +49 2054 934164www.zander.deRacorShaw Cross Business Park Churwel Vale Dewsbury,WF12 7RD England T +44 (0) 1924 487000, F +44 (0) 1924 /rfdeRacor Research & DevelopmentParker Hannifin GmbH & Co KG Inselstrasse 3-570327 Stuttgart Germany T +49 (0) 711 7071 290-0, F +49 (0) 711 7071 /racorHydraulic FilterStieltjesweg 8, 6827 BV P.O. Box 5008 6802 EA Arnhem, HollandT +31 26 3760376, F +31 26 /hfdeUrjala OperationSalmentie 26031700 Urjala as FinlandT +358 20 753 2500, F +358 20 753 /hfdeCondition Monitoring CenterBrunel Way Thetford,Norfolk IP 24 1HP EnglandT +44 1842 763299, F +44 1842 /hfdedomnick hunter ProcessDurham Road, Birtley Co. Durham,DH3 2SF EnglandT +44 (0) 191 410 5121, F +44 (0) 191 410 Engine Filtration & Water PurificationHydraulic FiltrationProcess FiltrationNorth AmericaW o r l d w i d e M a n u f a c t u r i n g L o c a t i o n sParker Hannifin Filtration Products and Systems (Shanghai) Co.,LtdNo.2 Workshop,786 Wangqiao Road,Jinqiao Processing Southem Zone,Shanghai, ChinaTel: +(86)21 5838 3030Fax:+(86)21 5838 2428Parker Hannifin Corporation Filtration GroupGlobal Headquarters 6035 Parkland Boulevard Cleveland, OH 44124-4141T 216 896 3000, F 216 896 Engine Filtration &Water PurificationRacor - Village Marine Tec.2000 West 135th Street Gardena, CA 90249T 310 516 9911, F 310 538 Hydraulic FiltrationHydraulic Filter16810 Fulton County Road #2Metamora, OH 43540-9714T 419 644 4311, F 419 644 /hydraulicfilterProcess FiltrationProcess Advanced Filtration2340, Eastman Avenue Oxnard, CA 93030T 805 604 3400, F 805 604 /processfiltrationFiltration & Separation/Balston242 Neck RoadHaverhill, MA 01835-0723T 978 858 0505, F 978 858 /balston Filtration & Separation/Finite500 Glaspie Street, PO. Box 599Oxford, MI 48371-5132T 248 628 6400, F 248 628 /finitefilterPurification, Dehydration and Filtration Division4087 Walden Avenue Lancaster, NY 14086T 716 685 4040, F 716 685 /pdfSales Office5900-B Northwoods Parkway Charlotte, NC 28269T 704 921 9303, F 704 921 Racor3400 Finch Road, PO Box 3208Modesto, CA 95353T 209 521 7860, F 209 529 /racorChina280 YunQiao RoadJinQiao Export Processing Zone Shanghai 101206 ChinaT +86 21 5031 2525, F +86 21 5834 /chinaIndiaPlot EL 26, MIDC, TTC Industrial Area Mahape, Navi Mumbai 400 709 India T +91 22 5613 7081, 82, 83, 84, 85F +91 22 2768 6618 /indiaJapan626, Totsuka-cho, Totsuka-ku Yokohama-shi, 244-0003 JapanT +81 45 870 1522, F +81 45 864 /japanKorea1-C Block, Industrial Complex of Jangan,615-1, Geumui-Ri Jangan-Myeon,Hwaseong-City Gyeonggi-Do, Korea T +82 31 359 0771, F +82 31 359 /koreaSingapore11, Fourth Chin Bee Road Singapore 619 702T +65 6887 6300, F +65 6261 /singaporeThailand1023 3rd Floor, TPS Building Pattanakam Road, Suanluang,Bangkok 10250 ThailandT +66 2717 8140, F +66 2717 /thailandLatin AmericaAfricaParker Comercio Ltda.Filtration DivisionEstrada Municipal Joel de Paula 900 Eugenio de Melo,Sao Jose dos Campos CEP 12225-390 SP BrazilT +55 12 4009 3500, F +55 12 4009 /brPan American Division-Miami7400 NW 19th Street, Suite A Miami, FL 33128T 305 470 8800, F 305 470 /panamParker Hannifin Africa Pty LtdParker Place, 10 Berne Avenue,Aeroport Kempton Park,1620 South AfricaT +27 11 9610700, F +27 11 /euAsia PaciﬁcAustralia9 Carrington Road, Castle Hill NSW 2154, AustraliaT +61 2 9634 777, F +61 2 9899 /australiaCompressed Air TreatmentFC-2-54A 12/03。

盘式过滤器资料(arkal)

过滤精度
20 微米
55 微米
100 微米
反冲洗水压力
5-8 BAR
4-8 BAR
3-8BAR
控制压缩空气：比反冲洗水压力大 0.5BAR，无油无水工作温度：<70℃
pH：4—13 材质：过滤头本体：316 SS.，特种复合材料
可选过滤叠片：聚丙烯/NYLON 塑料可选管架：碳钢喷涂聚酯，不锈钢，全塑
E．反洗不彻底
5 反洗不彻底
A．反洗水压太低
B．排污管或排污阀门压阻太大
C．杂质太粘
6 没有反洗
A．反洗控制气源没有或压力低
B．进气管堵塞
C．控制器设置错误或电器故障
7 电磁阀漏气不停 A．电磁阀泄露
解决方法
ARKAL SPIN KLIN 过滤系统 4 英寸外源清洗模式操作说明书
以色列阿科过滤器有限公司 2004-7
一、设备工作原理二、过滤设备运行模式三、设备基本参数四、设备安装五、调试前准备六、启动运行七、过滤系统停止运行八、系统日常维护九、故障检查与排除十、零件
每季维护
手动启动反冲洗，打开过滤过滤单元，检查叠片的清洁状态，如有污垢，按照 ARKAL 公司建议清洗方法清洗。
过冬准备
若系统不运行则排空过滤器和系统内积水以免结冻。
叠片拆装和清洗步骤
若 SPIN KLIN 在水质恶劣的地方运行时，其叠片会受到微生物，水垢等污染，污染后可以通过有效的清洗保证叠片长时间运行。 (1) 拧开过滤芯上蝴蝶盘 (2) 拆去芯上压盖 (3) 撤去叠片组，放在清洗液中清洗，建议用绳子把每组叠片栓起来，防止混乱。有关清洗液的资料和具体清洗方法请咨询当地代理。（4）清水冲洗叠片，然后重新装在过滤芯支架上

Parker OIL-X 压缩空气过滤器手册说明书

FILTRO PER ARIACOMPRESSA OIL-XFiltri per aria compressaMANUALE UTENTE: 17 118 6004 08/19 Rev. AGuida alla manutenzione: 171186001Guida all'installazione e configurazione: 171186002Manuale utente FiltrazioneP010 - P055 (WS, A0, AA, ACS)0405091116131819222123201217071014– Installazione del sistema OIL-X– Raccomandazioni per l'installazione– Codifica dei modelli– Portate del separatore d'acqua– Portate del filtro – Dati tecnici– Portate del filtro– Dichiarazione di conformità– Accessori/Ricambi– Parker nel mondo– Pesi e dimensioni del filtro– Depressurizzazione del sistema – Rimozione del bicchiere del filtro– Rimozione di elementi del bicchiere del filtro – Sostituzione dello scarico automatico– Etichetta di promemoria manutenzione – Procedura di avviamento del sistema– Intervalli di manutenzione– I nserimento di elementi di ricambio nel bicchiere del filtro– S ostituzione della guarnizione dell'o-ring della testa del filtro– Reinstallazione del bicchiere nella testa del filtro– Procedura di avviamento – Configurazione di esercizio– P esi e dimensioni del separatore d'acqua– Video: GuidaRACCOMANDAZIONI PER L'INSTALLAZIONERACCOMANDAZIONI PER L'INSTALLAZIONESi raccomanda che l'aria compressa venga trattata prima dell'ingresso nel sistema di distribuzione e nei punti di utilizzo/applicazioni critici.L'installazione di essiccatori per aria compressa in un sistema precedentemente umidificato potrebbe generare ulteriore sporco nei filtri sul punto di utilizzo durante l'essiccazione del sistema di distribuzione.In questo periodo potrebbe essere necessario cambiare gli elementi filtranti più frequentemente.Nelle installazioni in cui sono utilizzati compressori senza olio e sono ancora presenti aerosol d'acqua e particolato, devono essere ancora utilizzati gradi generici e ad alta efficienza.Un filtro per uso generico deve sempre essere installato per proteggere il filtro ad alta efficienza da aerosol di liquidi dispersi e particolato solido. Installare un'apparecchiatura di depurazione alla temperatura più bassa oltre il punto di congelamento, preferibilmente a valle di postraffreddatori e serbatoi d'aria.Il punto di utilizzo dell'apparecchiatura di depurazione deve essere installato il più vicino possibile all'applicazione.L'apparecchiatura di depurazione non deve essere installata a valle di valvole ad apertura rapida e deve essere protetta da eventuali flussi inversi o urti.Spurgare tutte le tubazioni in ingresso nell'apparecchiatura di depurazione prima dell'installazione, dopo l'installazione e prima della connessione all'applicazione finale.Se le linee di bypass sono installate attorno all'apparecchiatura di depurazione, assicurarsi che venga fornita una filtrazione adeguata alla linea, per evitare la contaminazione del sistema a valle.Installare le linee di scarico dai filtri a coalescenza direttamente in un separatore di condensa. Se non è possibile collegare le linee di scarico direttamente a un separatore, sfiatare le linee in un manifold di condensa (dotato di sfiato a un'estremità) e quindi in un unico ingresso di un separatore di condensa.Incaricare un'azienda preposta per lo smaltimento dei liquidi raccolti dall'apparecchiatura di filtrazione.I liquidi raccolti devono essere trattati e smaltiti responsabilmente.PROCEDURA DI AVVIAMENTOPrima di pressurizzare il filtro, assicurarsi che la testa e il bicchiere siano installati in modo appropriato e che il blocco sia allineato correttamente. Aprire lentamente la valvola di ingresso (01) per pressurizzare gradualmente il filtro e attendere 1 minuto (02) prima di aprire lentamente la valvola di uscita (03) per ripressurizzare le tubazioni a valle.Nota: non aprire le valvole di ingresso o uscita rapidamente né sottoporre l'unità a una pressione differenziale eccessiva, in quanto possono verificarsi danni.0 bar7 bar0103WSAAAO 1 minuto02WSAAAOMANUTENZIONE DEL PRODOTTOINTERVALLI DI MANUTENZIONEPer prestazioni ottimali del filtro, gli elementi filtranti a coalescenza e anti-particolato asciutto OIL-X Grado AO e OIL-X Grado AA devono essere sostituiti ogni 12 mesi (8736 ore) insieme allo scarico automatico con galleggiante.A differenza degli elementi filtranti a coalescenza e anti-particolato asciutto, che vengono sostituiti annualmente per garantire laqualità dell'aria compressa, la durata dell'elemento filtrante ad adsorbimento e della cartuccia può dipendere da vari fattori e richiedere sostituzioni più frequenti. I fattori che influiscono sulla durata dei filtri ad adsorbimento sono:Concentrazione dei vapori d'olioMaggiore è la concentrazione di vapore d'olio in ingresso, più rapidamente si esaurisce la capacità del materiale di adsorbimento, con conseguente riduzione della durata dell'elemento filtrante ad adsorbimento e della cartuccia.Grandi quantità di olioI filtri ad adsorbimento sono progettati solo per ridurre vapori di olio e odori, non olio liquido o sospensioni di olio. Un prefiltraggio con scarsa manutenzione o inesistente (filtri a coalescenza) causa il rapido esaurimento della capacità del filtro con conseguente rapida riduzione della durata dell'elemento filtrante ad adsorbimento e della cartuccia.TemperaturaIl contenuto di vapori di olio aumenta in modo esponenziale rispetto alla temperatura di ingresso, riducendo la durata dell'elemento filtrante ad adsorbimento e la cartuccia. Inoltre, nella misura in cui aumenta la temperatura, la capacità di adsorbimento del materiale adsorbente diminuisce, riducendo ulteriormente la durata dell'elemento filtrante ad adsorbimento e della cartuccia.Umidità relativa e punto di rugiadaL'aria umida riduce la capacità di adsorbimento del materiale adsorbente e la durata dell'elemento filtrante ad adsorbimento e della cartuccia. In teoria, i filtri ad adsorbimento in linea devono sempre essere installati a valle dell'essiccatore per aria compressa per prolungare la durata degli elementi filtranti ad adsorbimento e della cartuccia.Cambio dell'olio del compressoreQuando si cambia l'olio del compressore, il nuovo lubrificante brucia "componenti leggeri", aumentando il contenuto di vapore di olio per ore o settimane dopo il cambio. Questo incremento del contenuto di vapore di olio viene adsorbito dall'elemento filtrante o dalla cartuccia, riducendone la durata.Filtri ad adsorbimento OIL-X Grado ACSL'elemento OIL-X Grado ACS offre prestazioni ottimali a una temperatura di ingresso nominale di 21 °C, con punto di rugiada in pressione a -40 °C e concentrazione massima di vapore di olio di ingresso di 0,018 mg/m3. In queste condizioni il filtro OIL-X Grado ACS avrà una durata di 650 ore. L'uso del filtro OIL-X Grado ACS a temperature di ingresso/concentrazioni di vapore di olio di ingresso superiori o a monte di un essiccatore ad adsorbimento o frigorifero riduce la durata del filtro ad adsorbimento. Sostituire l'elemento filtrante a carbone se si rilevano vapori, odori o sapori. I filtri OIL-X Grado ACS sono raccomandati per applicazioni al punto di utilizzo solo dove la sostituzione degli elementi con più frequenza è accettabile.Filtr iA differenza dei filtri ad adsorbimento in linea (OIL-X Grado ACS), i filtri ad adsorbimento OIL-X Grado OVR sono dimensionati e selezionati non solo per fornire aria di qualità costante ma anche per garantire una durata della cartuccia di 12 mesi. La durata di 12 mesi (6000 ore per modelli OVR 100 ~ OVR 250 e 8736 ore per modelli OVR 300 ~ OVR 550) della cartuccia dipende dal dimensionamentodei seguenti parametri di ingresso: temperatura di ingresso massima/tipo di compressore, pressione di ingresso minima, posizione nel sistema (a monte o a valle dell'essiccatore) e contenuto di vapori di olio. Il filtri ad adsorbimento OIL-X Grado OVR sono progettati sia per l'intero impianto (sala compressori) che per applicazioni al punto di utilizzo.Chiudere lentamente le valvole di ingresso (01) e di uscita (02) e depressurizzare il filtro (03) utilizzando lo scarico.Svitare il bicchiere del filtro (01 e 02) e rimuovere gli elementi utilizzati (03).Nota: per rimuovere il bicchiere dei filtri 050 e 055 potrebbe essere necessaria una chiave a nastro.Attenzione0 bar/0 psi010203Attenzione0 bar/0 psiGuanti di protezioneSmaltire in modo sicuro0102Rimuovere l'elemento del bicchiere del filtro.Svitare lo scarico automatico (01) e smaltirlo (02). Installare il nuovo scarico (03) e serrarlo (04).2,5 N/mSmaltire in modo sicuro0104030203Inserire il nuovo elemento nel bicchiere del filtroaccertandosi che i capicorda siano posizionati correttamente nelle scanalature.Sostituire l'o-ring posto nella testa del filtro con il nuovo o-ring fornito.Reinstallare il bicchiere e la testa del filtro accertandosi che le filettature siano completamente inserite (01) e i blocchi siano allineati (02).Nota: per garantire che il bicchiere sia completamente inserito nella testa, è necessaria una rotazione di 360° fino all'arresto filettato per il bicchiere 010-030, di 720° per il bicchiere 035-045 e di 540° per il bicchiere 050-055.Accertasi di lubrificare l'o-ring e le filettature con un tipo di vaselina priva di acidi adeguato.0201Fino a 720°Non aprire le valvole diingresso o uscita rapidamentené sottoporre l'unità a unapressione differenzialeeccessiva, in quanto possonoverificarsi danni.Attaccare l'etichetta con la data di sostituzione dell'elemento al bicchiere del filtro e annotarvi sopra la data della sostituzione successiva, ad esempio dopo 12 mesi.Aprire lentamente la valvola di ingresso (01) per pressurizzare gradualmente il filtro e attendere 1 minuto (02) prima di aprire lentamente la valvola di uscita (03) per ripressurizzare le tubazioni a valle.Non utilizzaresolventi o alcol perpulire le etichette inquanto ciò potrebbecausare danni.0 bar/0 psi7 bar/100 psi011 minuto0203PROBLEMI? GUARDATE LA GUIDAGuarda la guida sul sito Web Parker Hannifin CONTENUTO DEL VIDEOInstallazione del sistema OIL-XProcedura di avviamentoDepressurizzazione del sistemaRimozione del bicchiere del filtroRimozione di elementi dal bicchiere del filtroSostituzione dello scarico automaticoInserimento di elementi di ricambio nel bicchiere del filtroSostituzione della guarnizione dell'o-ring della testa del filtroReinserimento del bicchiere nella testa del filtroEtichetta di promemoria manutenzioneProcedura di avviamento del sistemaSPECIFICHE TECNICHEESEMPIO DI CODIFICA DEI MODELLISCELTA DEL PRODOTTOI valori di portata indicati si riferiscono al funzionamento a 7 bar g (100 psi g), con valori di riferimento a 20o C, 1 bar (a), 0% di pressione relativa al vapore acqueo.Per valori di portata in presenza di altri livelli di pressione applicare i fattori correttivi indicati.MODELLO A = 1/4"B = 3/8"C = 1/2"D = 3/4"E = 1"G = 1 1/2"H = 2"I = 2 1/2"J = 3"G = BSPP N = NPTF = Galleggiante M = ManualeX = Nessuno I = Monitor criticitàWS AO AA ACS030PCodice a 3 cifre come mostrato di seguitoPORTATE DEL SEPARATORE D'ACQUACFP – Fattore di correzione della pressione minima di ingresso (separatori d'acqua)MODELLODIMENSIONIATTACCOL/SM 3/MINM 3/HCFMP010A P020D P045I P010C P035G P025E P055JP010B P025D P050I P015C P040H P030G [ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ]¼¾2 ½½1 ½1½13⅜¾2 ½½2104035010350110800101108004.2 2-235EPDM 1100,62,421,00,621,06,648,00,66,648,02,421,06,636144126036126039628803639628801441260396218574221742233169521233169585742233161514131211109876543212322182031891741601451311161008773584429150,680,710,730,760,790,820,850,890,941,001,141,331,592,002,634,00DATI TECNICIMODELLOMODELLI DI FILTROMIN. DI ESERCIZIO PRESSIONE MAX DI ESERCIZIO PRESSIONE MIN. RACCOMANDATA TEMP . DI ESERCIZIO MAX RACCOMANDATA TEMP . DI ESERCIZIOBAR GBAR GOCOCPSI GPSI GOFOFNota: i filtri di grado AO/AA/WS per l'uso fino a 16 bar g (232 psi g) sono forniti con scarico galleggiante [F] di serie.Per pressioni da 16 a 20 bar g (da 232 a 290 psi g), è necessario utilizzare uno scarico manuale [M].I filtri di grado ACS sono forniti con scarico manuale [M] di serie.P010P010P010P010P010P010055055055055055055[ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ]F M M FFM F M M FFM [ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ]11111116202016162015151515151523229029023223229022222235353535353580100100808050176212212176176122––––––P030G P050I P040H P055JP035G P055I P045I 1 ½2 ½231 ½2 ½2 ½1104302206201606203306,625,813,237,39,637,319,823391146613143391314699P030P050P040P055P035P055P0453961548792223257622321188PORTATE DEL FILTROCFP – Fattore di correzione della pressione minima di ingresso (filtri a coalescenza e anti-particolato asciutto)MODELLODIMENSIONI ATTACCOL/SM 3/MINKIT ELEMENTI DI RICAMBIOM 3/HCFMN.P010A P020C P010C P025D P010B P020D P015C P025E ¼½½¾⅜¾½110301060103020600,61,80,63,60,61,81,23,6216421127216442127P010P020P010P025P010P020P015P025[Grado][Grado][Grado][Grado][Grado][Grado][Grado][Grado][Grado][Grado][Grado][Grado][Grado][Grado][Grado]111111*********3610836216361087221616201519141813171211109876543212322902182772032631892481741601451311161008773584429150,680,710,730,760,790,820,850,890,941,001,141,331,592,002,634,00[ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ]PESI EDIMENSIONI DEL SEPARATORE D'ACQUAPESI E DIMENSIONI DEL SEPARATORE D'ACQUAMODELLOTUBO MISURAALTEZZA (H)(A)LARGHEZZA (L)(B)PROFONDITÀ (P)(C)PESOMMMMMMMMMMMMKGINSINSINSINSINSINSLB¼13½1 ½¾2 ½⅜1 ½½2¾2 ½180277516180440238440180277238440277516154232444154383202383154232202383232444761201927616489164761208916412019250701205010050100507050100701206509021836515784157650902841570902183383840383838383838383838400,802,6410,830,786,691,356,280,792,541,086,462,6410,807,0910,9120,317,0917,329,3717,327,0910,919,3717,3210,9120,316,069,1317,486,0615,087,9515,086,069,137,9515,089,1317,482,994,727,562,996,463,56,462,994,723,56,464,727,561,972,764,721,973,941,973,941,972,761,973,942,764,722,564,537,202,566,183,316,182,564,533,316,184,537,201,51,51,571,51,51,51,51,51,51,51,51,51,571,765,8323,891,7214,742,9813,851,755,612,3914,235,8323,81WSP010A WSP025E WSP055JWSP010C WSP035G WSP020D WSP045I WSP010B WSP030G WSP015C WSP040H WSP025D WSP050I Nota: i separatori d'acqua non presentano alcun indicatore DP , utilizzare le dimensioni H + d per l'altezza complessiva.Diametro del tubo (dimensioni attacco)bicchiere rimozione GiocoW ACHBDPESI EDIMENSIONI DEL FILTROPESI E DIMENSIONI DEL FILTROMODELLOTUBO MISURAALTEZZA (H)(A)LARGHEZZA (L)(B)PROFONDITÀ (P)(C)PESOMMMMMMMMMMMMKGINSINSINSINSINSINSLB¼¾2 ½3½1 ½½2⅜1½1 ½¾2 ½2 ½1802776548441803672385321802772384402385328441542325827721543222024751542322023832024757727612019219276120891647612089164891641925070120120507050100507050100501001206509021831836509028415765090284157841571833232686832323868323232683268680,842,1410,3015,300,823,041,177,300,842,691,166,901,447,1015,97,0910,9125,7533,237,0914,459,3720,947,0910,919,3717,3210,9120,9433,236,069,1322,9130,396,0612,687,9518,76,069,137,9515,077,9518,730,392,994,727,567,562,994,723,56,462,994,723,56,463,56,467,561,972,764,724,721,972,761,973,941,972,761,973,941,973,944,722,564,537,207,202,564,533,316,182,564,533,316,183,316,187,201,51,51,571,571,51,51,51,51,51,51,51,51,51,51,571,864,7122,7133,731,816,702,5816,091,865,922,5515,213,1915,6535,05P010A P025D P050I P055JP010C P030G P020C P040H P010B P025E P015C P035G P020D P045I P055I W ACHBDDiametro del tubo (dimensioni attacco)Gioco rimozione bicchiereCMODELLI DI FILTRON. CAT.INDICE010010010025 – 030025 – 030025 – 030015 – 020015 – 020015 – 020035 – 045035 – 045035 – 045050 – 055050 – 055035 – 055010 – 055TRK1-2MBK1-1MBK1-2TRK3-2MBK3-1MBK3-2TRK2-2MBK2-1MBK2-2TRK4-2MBK4-1MBK4-2TRK5-2MBK5-1ZD90GL EM1ACCESSORI/RICAMBI (KIT DI MANUTENZIONE)PARKER NEL MONDOAE – EAU, DubaiTel.: +971 4 8127100********************AR – ARGENTINA, Buenos AiresTel.: +54 3327 44 4129AT – AUSTRIA, Wiener NeustadtTel.: +43 (0)2622 23501-0*************************AT – EUROPA ORIENTALE,Wiener NeustadtTel.: +43 (0) 2622 23501 900****************************AU – AUSTRALIA, Castle HillTel.: +61 (0)2-9634 7777AZ – AZERBAIGIAN, BakuTel.: +994 50 2233 458****************************BE/LU – BELGIO, NivellesTel.: +32 (0) 67 280 900*************************BR – BRASILE, Cachoeirinha RSTel.: +55 51 3470 9144BY – BIELORUSSIA, MINSKTel.: +375 17 209 9399*************************CA – CANADA, Milton, OntarioTel.: +1 905 693 3000CH – SVIZZERA, EtoyTel.: +41 (0)21 821 87 00*****************************CL – CILE, SantiagoTel.: +56 2 623 1216CN – CINA, ShanghaiTel.: +86 21 2899 5000CZ – REPUBBLICA CECA, KlecanyTel.: +420 284 083 111*******************************DE – GERMANIA, KaarstTel.: +49 (0) 2131 4016 0*************************DK – DANIMARCA, BallerupTel.: +45 43 56 0400*************************ES – SPAGNA, MadridTel.: +34 902 330 001***********************FI – FINLANDIA, VantaaTel.: +358 (0) 20 753 2500*************************FR – FRANCIA, Contamine s/Arve Tel.: +33 (0)4 50 25 80 25************************GR – GRECIA, Atene Tel.: +30 210 933 6450************************HK – Hong Kong Tel.: +852 2428 8008HU – UNGHERIA, Budapest Tel.: +36 1 220 4155*************************IE – IRLANDA, Dublino Tel.: +353 (0) 1 466 6370*************************IN – INDIA, Mumbai Tel.: +91 22 6513 7081-85IT – ITALIA, Corsico (MI)Tel.: +39 02 45 19 21***********************JP – GIAPPONE, Tokyo Tel.: +81 (0) 3 6408 3901KR – COREA DEL SUD, Seul Tel.: +82 2 559 0400KZ – KAZAKISTAN, Almaty Tel.: +7 7272 505 800****************************LV – LETTONIA, Riga Tel.: +371 6 745 2601************************MX – MESSICO, Apodaca Tel.: +52 81 8156 6000MY – MALESIA, Shah Alam Tel.: +60 3 7849 0800NL – Paesi Bassi,Oldenzaal Tel.: +31 (0) 541 585 000********************NO – NORVEGIA, Asker Tel.: +47 66 75 34 00************************NZ – NUOVA ZELANDA, Mt Wellington Tel.: +64 9 574 1744PL – POLONIA, Varsavia Tel.: +48 (0)22 573 24 00************************PT – PORTOGALLO, Leca da Palmeira Tel.: +351 22 999 7360**************************RO – ROMANIA, Bucarest Tel.: +40 21 252 1382*************************RU – RUSSIA, Mosca Tel.: +7 495 645-2156************************SE – SVEZIA, Spånga Tel.: +46 (0)8 59 79 50 00************************SG – Singapore Tel.: +65 6887 6300SK – SLOVACCHIA, Banská Bystrica Tel.: +421 484 162 252**************************SL – SLOVENIA, Novo Mesto Tel.: +386 7 337 6650**************************TH – TAILANDIA, Bangkok Tel.: +662 717 8140TR – TURCHIA, Istanbul Tel.: +90 216 4997081************************TW – TAIWAN, Taipei Tel.: +886 2 2298 8987UA – UCRAINA, Kiev Tel.: +380 44 494 2731*************************UK – REGNO UNITO,Warwick Tel.: +44 (0) 1926 317 878********************US – USA, Cleveland Tel.: +1 216 896 3000VE – VENEZUELA, Caracas Tel.: +58 212 238 5422ZA – SUD AFRICA,Kempton Park Tel.: +27 (0) 11 961 0700*****************************22Filtro per aria compressa OIL-X - Manuale utente. ©2019.Centro informazioni prodotti per l'Europa Numero verde: 00 800 27 27 5374(da AT, BE, CH, CZ, DE, EE, ES, FI, FR, IE, IL, IS, IT, LU, MT, NL, NO, PT, SE, SK, UK)GARANZIA DI UN ANNO SULLAQUALITÀ DELL'ARIALa garanzia della qualità dell'aria ha durata di 1 anno e si rinnova a ogni sostituzione annuale degli elementi filtranti.Le sostituzioni annuali degli elementi filtranti garantiscono:• Prestazioni ottimali costanti• Qualità dell'aria sempre conforme agli standard internazionali• Protezione delle apparecchiature a valle, del personale e dei processi• Costi operativi ridotti• Maggiore produttività e redditività• TranquillitàPARKER HANNIFIN MANUFACTURING LIMITEDGas Separation and Filtration Division EMEADukesway, Team Valley Trading EstGateshead, Tyne and WearInghilterra NE11 0PZTel.: +44 (0) 191 402 9000Fax: +44 (0) 191 482 6296/gsfe© Parker Hannifin Corporation. Tutti i diritti riservati.。

Parker 12AT 50AT、80AT 80UT系列转动过滤器说明说明书

212AT/50AT80AT/80UT SeriesSpin-On FiltersApplications for Spin-On Filters• Mobile Equipment • Hydrostatic Drives • Industrial Power Units • Reservoir BreathersMounting•for flexibilityGauges/Switches • Identifies element condition during operation• No mess, oil is contained inside • Easy to handle • Single anddouble length filters for longer lifePorts• Both NPT and SAEstraight thread connections available. SAE Code 61 Flange on 80AT.Interchangeability • Parker canisters fit manycompetitors' heads. Contact Hydraulic & Fuel Filtration Division, search the Par<>Fit Toolkit at , or download our app.Parker’s latest range of Spin-On filter technology provides users withreliable performance in a lightweight, compact and cost effective package. These solutions provide protection to critical system components in a variety of low pressure applications.In addition to increased flow rates, Parker has expanded the product family to include new filter head configurations and flanged porting along withconsistency in filter element condition options.Recognized as a leader in product quality, Parker applies the latest in designand manufacturing techniques to deliver on our promise.Spin-On filters can be used in suction and return line filterapplications with pressures to 150 psi (10.3 bar).Improving system fluid cleanliness levels, providing better cold start performance and meeting service interval expectations are the primary objectives in the AT/UT series design. Parker filters utilize several types of filtration media to meet the demanding requirements of today’s applications.• Cellulose MediaThe original and most common media is made of naturalfibers. These twisted fibers are larger and more irregular than synthetic fibers — creating more resistance to flow or pressure drop.• Synthetic MediaThese man-made glass fibers are very uniform in size and shape — creating the least possible resistance to flow and providing improved efficiency to protect sensitive controls. • Par-Gel MediaA highly absorbent copolymer laminate with an affinity for water — allows hydraulic or lubrication fluid to pass freely but water is bonded to the media and forever removed from the system.312AT/50AT/80AT/80UT SeriesPerformanceFlow vs. Pressure LossLPM GPMP S I DB A R12AT -1 AssemblyLPMGPMP S I DB A R12AT -2 Assembly1086420LPM GPMP S I DB A R50AT -1 Assembly30252015105LPMGPMP S I DB A R30252015105LPMGPMP S I DB A R80AT -1 Assembly80UT -1 Assembly1086420LPM GPMP S I DB A R50AT -2 Assembly161412108642GPMP S I DB A RLPM181614121086420GPMP S I DB A R LPM80UT -2 Assembly80AT -2 AssemblyInstallation and Specification DataPressure Rating:Maximum AllowableOperating Pressure (MAOP): 150 psi (10.3 bar)Design Safety Factor: 2.5:1Operating Temperatures:-40ºF to 225ºF (-40ºC to 107ºC)Canister Collapse Rating:100 psid minimumCanister Condition Indicators:Gauge: Color coded 15/25 psi Gauge: Color coded vacuum Pressure Switch: Normally open 20 +/- 2 psi 5 Amps @ 24 VDC Vacuum Switch: Normally open 5" +/- 1" Hg 1.0 Amp @ 120 VAC Filter Material: Head: AluminumCanister: Low Carbon Steel Shipping Weights (approximate):Single length: 1.6 lbs.Double length: 2.7 lbs.Drawings are for reference only. Contact factory for current version.Spin-On FiltersLinear Measure: millimeterinchThread DepthDia 4Spin-On FiltersPressure Rating:Maximum AllowableOperating Pressure (MAOP): 150 psi (10.3 bar)Design Safety Factor: 2.5:1Operating Temperatures:-40ºF to 225ºF (-40ºC to 107ºC)Canister Collapse Rating:100 psid minimumCanister Condition Indicators:Gauge: Color coded 15/25 psi Gauge: Color coded vacuum Pressure Switch: Normally open 20 +/- 2 psi 5 Amps @ 24 VDC Vacuum Switch: Normally open 5" +/- 1" Hg 1.0 Amp @ 120 VAC Filter Material: Head: AluminumCanister: Low Carbon Steel Shipping Weights (approximate):Single length: 3.9 lbs.Double length: 4.8 lbs.Installation and Specification DataDrawings are for reference only. Contact factory for current version.Linear Measure: millimeterinch127.805.0357.152.2529.201.1525.401.005DiaInstallation and Specification DataPressure Rating:Maximum AllowableOperating Pressure (MAOP): 150 psi (10.3 bar)Design Safety Factor: 2.5:1Operating Temperatures:-40ºF to 225ºF (-40ºC to 107ºC)Canister Collapse Rating:100 psid minimumCanister Condition Indicators:Gauge: Color coded 15/25 psi Gauge: Color coded vacuum Pressure Switch: Normally open 20 +/- 2 psi 5 Amps @ 24 VDC Vacuum Switch: Normally open 5" +/- 1" Hg 1.0 Amp @ 120 VAC Filter Material: Head: AluminumCanister: Low Carbon Steel Shipping Weights (approximate):Single length: 11.3 lbs.Double length: 13.0 lbs.Drawings are for reference only. Contact factory for current version.Dual Spin-On FiltersLinear Measure: millimeterinchNPT Integral ThreadsGauge Port (4 places)Torque to 2-3 turns from finger tight6Ports (Both Ends) Integral Threads+1DANGER!Read and followall safety instructions.Failure to do so could resultin serious bodily injury ordeath.2. Turn off power supply topumping unit.3. Tag pumping unit out ofservice for filter change.4. Remove the old filter, whilecollecting all spilled fluid.Dispose of the old filter inaccordance with local, stateor federal regulations.5. Apply a thin film oflubricating oil to the gasketof the new filter.6. Thread new filter on the flowadapter or manifold untilthe gasket makes contact.Tighten according to filterlabel.7. Turn on fluid supply.8. Pressurize the system andcheck for leaks.WARNING! A pressuredifferential indicator mustbe installed for any systemcapable of generating morethan 25 psid across the filter.2. Filter unit must be installedusing a suitable mountingdevice or rigid piping.3. Filter unit must be installedwith flow in proper direction.4. Filter should be inspectedevery six months andchanged annually when slowflow occurs.5. Water absorbing filters- when the differentialpressure reaches 20-25 psidthe filter could be pluggedwith water and shouldbe immediately replaced.Failure to replace couldresult in internal filter ruptureresulting in water downstream.Spin-On Filters8Return Line Applications1. 25 lb bypass in flow adapterrecommended.2. Filter unit must be installedin the circuit just before thereservoir. DO NOT use ashutoff valve in the returnline for the filter that is beingchanged. A check valve isacceptable.3. Filter unit must be sizedto accept the total flowduring discharging from thecylinders and actuators.Suction Side Applications1. 3-5 lb bypass in flowadapter recommended toprevent pump cavitation.2. A vacuum gauge isrecommended to monitorfilter condition.3. Cavitation of the pump canbe a problem with the filteron the suction line. Alwaystry to minimize restriction byover sizing the filter, or byusing a microglass media.6. If water stoppage issuspected, remove the waterabsorbing filter and pour thecontents in a jar. If fluid iscloudy or water separates inthe jar, the filter is most likelyplugged with water. If wateris excessive in the jar it maybe necessary to have thetank cleaned or drained priorto further use.Spin-On FiltersAccessory Parts ListIndicating Pressure Gauge (15 PSI)Indicating Pressure Gauge (25 PSI)Pressure Switch1/8-27NPTF Vacuum Switch Linear Measure: millimeterinch1/8 NPTSeals IncludedIndicating Vacuum Gauge9Spin-On FiltersReservoir BreatherSizingSelect the proper size canister for the maximum rate of reservoir draw down or air exchange rate. As a rule of thumb, clean pressure drop should be limited to 0.18 psid (5" H 2O).A pipe flange, weld collar, etc. may be used to connect the adapter kit to the reservoir. Make sure that air is not able to leak around the adapter. When mounting on the side of the reservoir, make sure the installation is above the surface of the fluid.Recommended canister change out is after 500 hours of operation.More frequent replacement may be required when operated in heavily contaminated areas such as grinding operations, primary metal mills, and on mobile equipment. Under such conditions, increase replacement frequency to every 250 hours.* 99% Removal efficiency for particles larger than the stated size in air.Graphs are for 03C canisters only. Total pressure drop across canister, adapter, and pipe may be found by adding pressure drops below:+ 1.5% for each inch of 12AT adapter or 3/4" pipe used.+ 3.0% for each 3/4" elbow used.+ 1.0% for each inch of 50AT adapter or 1-1/4" pipe used.+ 2.0% for each 1-1/4" elbow used.Typical Installations mounted on side or top of reservoirAllow 1.25" for canisterremoval clearanceLinear Measure: millimeterinch1012AT/50AT/80AT/80UT SeriesSpin-On FiltersHow T o OrderSelect the desired symbol (in the correct position) to construct a model code.Example:Notes:1. Selecting 80AT or 80UT in Box 1 requires the selection of “G” in Box 6 and “H” in box 8.2. Nominal flow rates for single length filters: 12AT - 12GPM; 50AT - 35 GPM; 80AT/80UT - 55 GPM.Replacement Canisters11Aerospace Filtration Division Greensboro, North Carolina 336 668 4444Bioscience & Water Filtration Division Bioscience Filtration Oxnard, California877 784 2234Water PurificationCarson, California310 608 5600Engine Mobile Aftermarket Division Kearney, Nebraska308 234 1951Engine Mobile Original Equipment Division Modesto, California209 521 7860HVAC Filtration Division Industrial Gas Filtration &Generation DivisionLancaster, NY800 343 4048Industrial ProcessFiltration DivisionMineral Wells, T exas940 325 2575Bioscience EngineeringFiltration Division EMEABirtley, United Kingdom+44 (0) 191 410 5121Engine Mobile FiltrationDivision EMEADewsbury, United Kingdom+44 (0) 1924 487 037Gas Separation &Filtration Division EMEAT eam Valley, United Kingdom+44 (0) 191 402 9000Australia Filtration DivisionCastle Hill, Australia+61 2 9634 7777China Filtration DivisionShanghai, China+86 21 2067 2067India Filtration DivisionChennai, India+91 22 4391 0700Korea Filtration DivisionHwaseon City, Korea+82 31 359 0852Latin America Filtration DivisionSao Paulo, Brazil+55 12 4009 3500Parker Filtration Group。

Parker OIL-X滤芯系列-污染物过滤与水分离器说明说明书

OIL-X Filter RangeCompressed Air Purity Guarantee & Die-Cast Filter Housing GuaranteeThe Parker OIL-X filter range has been designed to provide compressed air purity that meets or exceeds airpurity classifications shown in all revisions of ISO8573-1, the international air quality standard/gsfeENGINEERING YOUR SUCCESS.Water Separators – Grade WSOIL-X Grade WS water separators provide reduction of bulk condensed water and liquid oil and their performance has been tested in accordance with ISO 12500-4:2009 &ISO8573-9:2004. Separation performance has been independently verified by Lloyds Register. When operated between 25 & 100% of rated flow, OIL-X Grade WS water separators will provide liquid separation efficiency between 92 & 100%, equivalent to ISO 8573-1 Class 8 for water. When liquids are present in the compressed air stream, OIL-X Grade WS water separators must be installed prior to coalescing filters to protect them from bulk liquid contamination.Coalescing Filters – Grades AO & AA / Dry Particulate Filters - Grades AO (with manual drain) & AA (with manual drain)OIL-X Grades AO & AA coalescing filters provide reduction of oil and water aerosols, and solid particulates. OIL-X Grades AO & AA dry particulate filters provide reduction of solid particulates only. Their performance has been tested in accordance with ISO 12500-1:2007 & ISO 8573-4:2019. Filtration performance has been independently verified by Lloyds Register. Coalescing and dry particulate filter performance is guaranteed for 12 months when sized, installed and operated in accordance with Parker recommendations. The filter performance guarantee can be extended by replacing the filter element and consumable parts annually.Oil Vapour Reduction Filters – Grades OVR & ACSOIL-X Grade OVR & OIL-X Grade ACS provide reduction of oil vapours and their performance has been tested in accordance with ISO 8573-5:2001 and independently verified by Lloyds Register. The lifetime of ACS filter elements is affected by the inlet oil vapour concentration, bulk oil, temperature, relative humidity or dewpoint of the compressed air and compressor oil changes and will vary from system to system. For plant scale protection, critical applications or systems where frequent element changes are not possible, Parker OIL-X Grade OVR oil vapour reduction systems should be installed.OIL-X Filtration ISO8573-1 Air Purity ClassificationsFilter Combination ISO8573-1:2010 Classification Filter Combination ISO8573-1:2010 ClassificationA O Class 2.-.3 A O (M) Class 2.-.-AO + AA Class 1.-.2 AO (M) + AA (M) Class 1.-.-AO + AA + ACS Class 1.-.1AO + AA + OVR Class 3.-.0AO + AA + OVR + AO (M) Class 2.-.0AO + AA + OVR + AO (M) + AA (M) Class 1.-.0Die-Cast Aluminium Filter HousingsOIL-X filter housings are protected by an anti corrosion coating and a tough external epoxy coating. All housings are guaranteed for 10 years under normal recommended use.Catalogue: OPXCAQG 06/21 Rev. 000©2021 Parker Hannifin Corporation. All rights reserved.Conditions1. OIL-X Filters are depth filters and are not absolute rated. AO Grade Efficiency is 99.925%.AA Grade Efficiency is 99.9999%* (* the limit of accurate measurement).2. Filtration performance has been tested and Independently validated in accordance withthe requirements shown in the standards for oil aerosol (ISO 12500-1:2007), particulate (ISO 8573-4:2019) and oil vapour (ISO 8573-5:2001) and at a temperature of 21°C. 3. The system pressure and operating temperature of the compressed air systemwill affect the oil carryover performance of a coalescing filter, and siteconditions /test method must be accounted for during on site air quality testing.4. The lifetime of ACS oil vapour removal filter elements is affected by the pressure, oilconcentration, relative humidity and temperature of the compressed air and will vary from system to system.5. Combinations of filters will be required to achieve the highest qualityclassifications required by ISO 8573-1:2010.6. AO filters should be protected from bulk liquid contamination using a grade WSwater separator (installation dependant)7. AA filters must be preceded by an AO filter.8. ACS / OVR filters must be preceded by coalescing pre-filtration foroil / water aerosol treatment.9. AO Performance based upon a maximum inlet concentration of 40mg/m 3of oil aerosol at 21°C.10. AA Performance based upon a maximum inlet concentration of 10mg/m 3of oil aerosol at 21°C.11. ACS Performance based upon a maximum inlet concentration of 0.018mg/m 3of oil vapour at 21°C.12. OVR Performance based upon a maximum inlet concentration of 0.05mg/m 3of oil vapour at 21°C.13. Installation and operation must be in accordance with Parkerrecommendations.14. Only genuine Parker replacement parts may be used in anyservice/repair or all guarantees will be deemed invalid.15. Installation & service data must be supplied with any guarantee claim.16. Housing guarantee does not cover consumable parts, normal wear and tearnor any deterioration or defect due to improper use, negligence, accidental or malicious damage. Performance guarantee restricted to replacement of filterelements only and does not cover consequential losses.。

Parker F602 高流量系列滤器说明书

Drains and Options Blank Manual Twist DrainQ External Heavy Duty Auto Drain R Internal Auto Drain USemi-Auto DrainHi-Flow F602 SeriesBOLD ITEMS ARE MOST POPULAR.Ordering InformationF 602 — 06 W J — /**BowlE 32 oz. Large Capacity Metal without Sight GaugeW 16 oz. Metal withSight GaugeElement G 5 Micron J 40 MicronPort Size 06 3/4 Inch 08 1 InchPort Threads — NPT G BSPPF602-06W, F602-08W Filter DimensionsA 4.90(124)B 7.88(200)C 8.72(221)D 4.06(103)E 0.84(21)F 2.45(62)F602-06E, F602-08E Filter DimensionsA 4.90(124)B 11.10(282)C 11.94(303)D 4.06(103)E 0.84(21)F 2.45(62)inches (mm)Features• Excellent water removal efficiency• For heavy duty applications with minimum pressure drop requirement.• Unique deflector plate that creates swirling of the air stream ensuring maximum water and dirt separation.• Large filter element surfaceguarantees low pressure drop and increased element life.• 40 micron filter element standard, 5 micron available.• Metal bowl with sight gauge standard.• Twist drain as standard, optional auto drain.• Large bowl capacity.• Optional high capacity bowl(s) available.• High Flow: 3/4" – 270 SCFM § 1" – 300 SCFM §3/4 & 1 Inch PortsStandard part numbers shown bold.For other models refer to ordering information below.§ SCFM = Standard cubic feet per minute at 90 psig inlet and 5 psig pressure drop.Port Size NPTTwist DrainInternal Auto DrainMetal Bowl / Sight Gauge - 16 oz.3/4"F602-06WJ F602-06WJR 1"F602-08WJ F602-08WJR Metal Bowl without Sight Gauge - 32 oz.3/4"F602-06EJ F602-06EJR 1"F602-08EJF602-08EJREngineeringLevel * Will be Entered at Factory.AutomaticDrainManual Drain102345Flow - SCFM P r e s s u r e D r o p - P S I GP r e s s u r e D r o p - b a r.1.2.3Primary Pressure - PSIG 2510050751501.73.4 5.2 6.910.3Primary Pressure - bar 040608010012014020Flow - dm /s3nFlow - SCFMP r e s s u r e D r o p - P S I GP r e s s u r e D r o p - b a r.1.2.3040608010012014016020Primary Pressure - PSIG 1.7 3.4 5.26.910.3Primary Pressure - barFlow - dm /s3nTechnical Specifications – F602Technical InformationF602 Filter Kits & AccessoriesBowl Kits –Aluminum (E) 32 oz. ...........................................................BK603B Zinc with Sight Gauge (W) 16 oz. ...................................BK605WB Drain Kits –External Auto (E) 32 oz. .....................................................SA603D External Auto (W) 16 oz. ....................................................SA602D Internal Auto (All) ............................................................SA602MD Manual (All) ..................................................................SA600Y7-1 Semi-Automatic “Overnight” Drain ....................................SA602A7 (Drains automatically under zero pressure)Filter Element Kits –40 Micron (All) ...................................................................EK602B 5 Micron (All) ...................................................................EK602VB Mounting Bracket Kit(Pair or 2 Kits Pipe Mounted Brackets needed) –(3/4" Unit) ...................................................................SA200AW57 (1" Unit) ......................................................................SA200CW57Repair Kits –Deflector, Baffle Assembly, and Retaining Rod (E,W) .......RK602B External Auto Drain (All) ....................................................RK602D Internal Auto Drain (All) ..................................................RK602MD Metal Bowl with Sight Gauge (W) 16 oz. .....................RKB605WBSpecificationsBowl Capacity –Aluminum Bowl (E) 32 oz. ..............................................32 Ounces Zinc Bowl (W) 16 oz. ......................................................16 Ounces Port Threads ...................................................................3/4, 1 InchPressure & Temperature Ratings – Aluminum Bowl (E) 32 oz. – 0 to 300 psig (0 to 20.4 bar) 40°F to 150°F (4.4°C to 65.6°C) Zinc (W) 16 oz. – 0 to 250 psig (0 to 17.2 bar)40°F to 150°F (4.4°C to 65.6°C)With Internal Auto Drain (R) – 20 to 175 psig (1.4 to 11.9 bar)40°F to 125°F (4.4°C to 52°C) With External Auto Drain (Q) – 0 to 250 psig (0 to 17.2 bar)40°F to 150°F (4.4°C to 65.6°C)Weight –Aluminum Bowl (E) 32 oz. ............................... 7 lb. (3.18 kg) / Unit 28 lb. (12.70 kg) / 4-Unit Master Pack Zinc Bowl (W) 16 oz. ..................................... 6.3 lb. (2.86 kg) / Unit 25 lb. (11.34 kg) / 4-Unit Master PackMaterials of ConstructionBody .............................................................................................Zinc Bowls –(E) 32 oz. ........................................Aluminum without Sight Gauge (W) 16 oz. ......................................................Zinc with Sight Gauge Drain –Manual T wist & Overnight .......................................................Brass Housing “R” ............................................................................Acetal Housing “Q” ..........................................................................Bronze Filter Elements –40 Micron (Standard) ................................................Polypropylene 5 Micron (Optional) ...................................................Polypropylene Seals ...........................................................................................Nitrile Sight Gauge ...............................................................................Nylon( ) = Bowl TypeFloat (Inside Bowl) Manual Push ButtonDrain(Outside Bowl)Drain (1/4" NPTF)Connection Through Bowl (1/8" NPSM)“Q” Option External Heavy Duty Auto Drain SA602D / SA603DFor heavy duty applications where the filter is being used to remove large volumes of liquid and/or particulate matter from the airstream, the external automatic drain (“Q” option) should be used.Air Line Filters。

Amaircare 10 000 ET HEPA 过滤器系统用户手册说明书

READ AND SAVE THESE INSTRUCTIONS!Please read instructions before installing and using the HEPA Bypass Air Filtration System (HEPA system). This will help you obtain the full benefit of the HEPA system you have selected. It will also help you to avoid needless service costs.1. Read this manual carefully. Failure to follow these rules and instructions could cause a malfunction of the air filter or unsatisfactory service and could void your warranty.2. Follow a regular service and maintenance schedule to ensure efficient operation.3. For safety and optimized performance of your HEPA system, all installation and maintenance must be performed by a professional heating and ventilation contractor. The installer should be made aware of your indoor air quality situation and be familiar with your heating, ventilation and air conditioning equipment.4. High particulate distribution may occur during initial start-up of this product after installation or after scheduled filter changes. Individuals who are highly sensitive to airborne particulates should not be in the building and allow 24 hours of operation for removal of particulates from occupied spaces before re-entry.© 2015 Americair Corporation, Mississauga, Ontario, CanadaAIR CLEANERS/FILTERSAMAIRCAREHEPA BYPASS AIR FILTRATION SYSTEMHOMEOWNERS MANUAL & DEALER INSTALLATION INSTRUCTIONSFOR MODEL 10 000 ETPackage 1 of 1 contains:1 - HEPA System3 - Complete Filter Sets (Packed inside Unit)1 - Installation Instructions (this manual) 1 - Registration Card1 - Filter Changes Reminder Label Model 10 000 ET is designed to filter air up to arate of 1000 cfm.Rules for Safe Installation and Operation (1)Shipping and Packing List (1)Specifications (2)Introduction (2)General Information (3)Product Application Guidelines (3)Parts Identification (4)Physical Dimensions of Units (5)Dealer Installation Instructions ...............................6-8Operation (9)Maintenance (9)Filter Change Schedule (9)Filter Changing Guidelines (9)Dealer Filter Change Instructions (10)Dealer Motor Assembly Replacement Instructions (11)Electrical Diagram (11)Replacement Parts (12)Nom.AirFlow@**********”E.S.P.Weight (max - unpackaged)Supply VoltageNom. Measured Power ConsumptionMotor Current Draw - TotalAir Intake Collar (max)Air Outflow Collar (max)Operating Temp. Range - Return air (ºF)HEPA filter efficiency = 99.97% @ 0.3 micron particles Ambient temperature range: -40ºF to 130ºFFor 220 VAC Units (only sold outside N. America) Nom. Measured Power ConsumptionMotor Current Draw - Total 10 000 ET 1000 cfm 130 lbs. 120 VAC 600 Watts 4.8 amps 10”x12”10”x12”30 to 95 300 Watts 1.2 ampsCongratulations! You will quickly realize that you have purchased a very effective air cleaning system. It incorporates state of the art HEPA (High Efficiency Particulate Air) technology.Your Amaircare HEPA system comes with a limited warranty. With proper attention to its care and maintenance, you will receive optimum performance.If your indoor air has abnormally high concentrations of particulates, the life span of the filter media may be shortened. Excessive particulates in the air will reduce the expected life of the HEPA filter. Under normal conditions the HEPA filter will last from two to five years. Optional activated carbon canisters have a finite limit as to the amount of odor or other gaseous volatile organic compounds (V.O.C.’s) that they can adsorb. The higher the concentrations, the shorter the expected life. Higher humidity may shorten the life of carbon canisters. Under normal conditions, carbon canisters should last up to 12 months.Initially, the HEPA filter’s particulate removal efficiency improves with use. However, the air flow through the HEPA filter media will decrease, as dust builds up on the filter, thus lowering its ability to circulate and clean as much air as when it was new. If the air flow through your unit is noticeably reduced, you can inspect the prefilter and HEPA filter to see if they should be replaced. Replacement (or washing if foam) of the prefilter every 3 months will help extend the life of the HEPA filter. Please contact your local Amaircare dealer regarding replacement of filter media, warranty information or if you have any questions or concerns about the performance of your HEPA system.NOTE: This filtration system is an ADDITIONAL filter, and does NOT replace the existing air handler/furnace system filter.Media FiltersMedia filters strain particulates from the air. The filter media needs to have tiny holes to allow air to pass through, but not particulates. Filter types vary for all sorts of purposes. The most effective and proven filter media is HEPA. HEPA filter media is 99.97% efficient at capturing particles which are 0.3 micron in size or larger.Carbon FiltersCarbon media is used to capture chemicals and odors, also referred to as V.O.C.’s. Chemicals and odors cannot be captured with media type filters. Activated carbon collects chemicals and odors in a process called adsorption. If air passes through the carbon filter before particulates are removed, the surface of the carbon quickly gets covered with particulates, rendering it ineffective at capturing chemicals and odors. If particulates are removed from the air with a HEPA filter, virtually the entire surface area of the carbon can be used to capture chemicals and odors. This increases the efficiency and filter life of the carbon filter. Separate HEPA and Carbon FiltersHEPA and carbon filters have different life spans. It is important for a filtration system to keep the filter components independent from each other, so that the filter that is dirty/saturated can be changed. This is more economical than a system where you need to throw out two or three filters when only one needs changing.The HEPA System’s 3 Stage Filtration ProcessThe 3 stage filtration process is used to create a very effective filtration system. Each filter is independent and can be changed individually.• Stage 1: Prefilter - The prefilter (foam) removes larger particulates from the air, thus prolonging the life of the HEPA filter.• Stage 2: HEPA - The HEPA filter removes 99.97% of particulates 0.3 micron and larger. The cleaned air then passes through the third stage filter.• Stage 3: Carbon - The carbon filter is about 1/2 an inch thick to give it plenty of surface area for removing chemicals and odors from the air. This filter may be replaced by an optional heavy duty granular carbon canister available for maximum removal of chemicals and odors. The clean air is then reintroduced into the air you breathe.Cabinet PartsInside Cabinet (Filter Section)figure 1.figure 2.Easy Twist HEPA Cartridge Partsfigure 3.figure 5.Model 10 000 ET:Forced air handler/furnace systems:The HEPA system should be installed as a bypass system, with part of the return ducted into the HEPA system. The filtered air is then rerouted back into the return air, and continues through the system to be heated/cooled.Independent Operation:The HEPA systems can be used independently of any other equipment! The intake and outflow of the filtration system can be ducted into the same room to create a cleaner environment almost anywhere. The intake or outflow can also be ducted elsewhere. The intake and outflow should be installed on opposite sides of the room; however, this varies according to your specific needs.1.Make sure that the unit is plugged into a grounded outflow (120 Volt, 60 Hz).2.For optimum performance, the HEPA system should operate when the indoor air handler/furnace blower is on.3.Turn the unit on by rotating the variable speed dial clockwise. The unit starts in High speed, turn all the wayclockwise for low speed.4.To turn the unit off, rotate the variable speed dial counter-clockwise until you feel or hear it click into the ‘off’position.Proper care and maintenance of your HEPA system will ensure years of service. The unit must be turned off during service/maintenance or when filters are being changed.It is recommended that gloves and a filtered breathing mask be worn during filter replacement.Filter Change ScheduleNote: Note: Failure to properly maintain your HEPA system will decrease the efficiency and air flow. PreFilter: 1 year (foam prefilters can be washed every few months and reused)HEPA Filter: 2 to 5 yearsInner Carbon Filter: 6 monthsOptional Carbon Canister: 12 monthsNOTE: Filter life is based on average air content. Some filters may need to be changed more often due to higher amounts of dust, humidity, or chemicals found in your ambient air. Additionally, people who are more sensitive to these airborne contaminates may desire more frequent filter changes.Filter Changing GuidelinesPrefilter:Dust and other large particles will collect on the prefilter over time. The color of the filter will change as particulates build up on the prefilter. Change the prefilter when you can see the particulate build up start to clog up the prefilter.HEPA Filter:As the HEPA filter captures particulates, it will darken over time. Replace the HEPA filter when it darkens to the level seen in example D.Inner Carbon Filter:The inner carbon filter will rarely look used. This filter captures odors and gasses, yet the filter’s appearance will not change. When this filter has reached it’s maximum adsorbancy of odors and gasses, it will no longer work. Replace this filter when it no longer seems to capture odors, or every 6 months (12 months foroptional Carbon Canister), which ever occurs first.A. NewB. UsedC. UsedD. ReplaceIt is recommended that gloves and a filteredbreathing mask be worn during filter replacement to avoid breathing particulates (dust, mold, pollen, etc.) captured on the filter that become airborne during the filter(s) changeout.The old filters should be wrapped and sealed inplastic bags immediately upon removal from theunit to avoid distributing particles throughout thehouse during the process of disposal.1. Accessing the filtersa. Remove safety screw(s) from HEPA filter access panel.b. Pull the HEPA filter access panel up by the finger tabsand lift out to remove.c. Bracing the unit so it does not move, turn the HEPAcartridge counter-clockwise and lift/pull out.2. Prefilter Replacementa. Pull the prefilter up and off the HEPA cartridge.NOTE: The prefilter may contain contaminants, remove itslowly to avoid releasing particles back into the air.b. Foam prefilters can be washed several times, wash by hand in warm water. Let dry completely before placingback onto the HEPA cartridge.b. If replacing the filter, remove plastic shrink wrap from thenew prefilter.c. Stretch the new/washed filter around the top of the HEPA cartridge and slide it down into place.3. Inner Carbon Filter Replacementa. Look inside the HEPA cartridge to locate the two ends ofthe inner carbon filter.b. Pull one end of the old inner carbon filter in and bend itinto a loose roll so it can be removed.c. Remove the inner carbon filter from the HEPA cartridge.d. Remove plastic shrink wrap from the new inner carbonfilter.into the unit.b. With each annual filter replacement kit, a new ‘o’ ring isprovided. The old one is removed by pinching it between two fingers and pulling it off the collar on the blower deck.c. Discard old ‘o’ ring.d. Place the new ‘o’ ring onto the collar and slide it down tothe base of the blower deck.5. Optional Carbon Canistera. Remove old carbon canister (if installed) by pulling it outfrom the inside of the HEPA filter.b. If replacing an inner carbon filter with the carbon canister,remove inner carbon filter by following the steps a. to c. in section 3.c. Remove the plastic shrink wrap from the new carbon canister.d. Slide the carbon canister into the HEPA cartridge, smaller end first. The carbon canister should slide all the way in until the metal edges at the base meet the HEPA filter.e. Support the carbon canister with your fingers so it does not slide out when replacing the HEPA cartridge assembly into the unit.6. Installing the HEPA Filter Cartridge a. With the filters changed or inspected, all 3 filters areready to be placed back into the unit. Place the HEPA cartridge gently into the unit (if a carbon canister is being used, take care not to let it slide out as it is heavy and could damage the unit)b. When the HEPA cartridge is in place, brace the unit, pressthe filter into the adaptor and gently turn it clockwise until it locks into place. If too much force is used, the cartridge may be difficult to remove.c. Replace the HEPA filter access panel.d. Re-install safety screw(s) into HEPA filter access panel.e. Plug the unit back into a power outflow and turn it on.3. Installing the new motor assemblya. Slide the new motor into the motor mount makingsure that the wires go through the smaller hole offset from the center of the bracket.b. Secure the new motor to the motor mount with thefour screws removed in step 2c.d. Connect the wires as follows:- Blue wire from motor to the on/off switch. - Yellow/green wire from motor to the ground post. - Brown wire from the motor to a capacitor post. - Black wire from the motor to the other capacitor post.Replacement Parts for 10 000 ET Qty Required Canadian U.S.for Unit16 ET Standard Annual Filter Kit (1 Prefilter, 2 Carbon) 3 94004061 94014061 16 ET Plus Annual Filter Kit (1 Prefilter, 1 VOC Canister) 3 94004181 94014181 16 ET (Easy Twist) HEPA Filter Cartridge 3 90004437 90014437 Motor Assembly - 10,000 (120V) (1) As needed 99002700 99012700 Motor Assembly - 10,000 (220V) (1) As needed 99003300 99013300Use this unit only in the manner intended by the manufacturer.Questions? Comments? Need an Amaircare Dealer?Contact Amaircare at:1.800.268.7732******************。

Parker食品和饮料过滤器装置系列说明书

Filtration Housings For food and beverage applications4-5 Introduction to Parker 6-7 Dedicated filtration range 8-9Housing quick reference10-11 PHP single and multi 12-13 PHB multi 14-15 PHB demi 16-17 PHB single 18-19 PHF demi 20-21 PHI single22-23 PHV single and multi 24-25 PHW single 26-27 PHW multi 28-29 Heating equipment 30-31Related productsContentsParker’s filter housing range is designed both to meetinternational industry standards and specific customer application requirements. With over 50 years’ experience designing and fabricating major systems for the food and beverage industry, a combination of practical experience with design and manufacturing excellence have gained Parker a reputation for supplying high quality products.As a customer of Parker you have access to highly skilled engineers, trained to meet your exact product and service requirements at the highest possible standards.Additional services include: Project management Process system design Global support Operator trainingDedicated technical team Quality management systemsVessels are built to meet industry standardsPED (2014/68/EU)ATEX (2014/34/EU)All Parker vessels adhere to manufacturing best practiceISO9001ISO14001Dedicated filtration rangeAs well as supplying vessels, Parker supply automated filtration systems and manufacture a range of microfiltration cartridges for liquid and gas applications.Since 1963, Parker have continually innovated to support food and beverage producers and packagers worldwide. Product ranges have been designed to deliver optimum operational performance and maintain key commitments to protecting product quality, reducing processing costs and providing specialist support.Dedicated products are available for various beverage industries including;Supported by innovative products, state-of-the-art technicalfacilities and a specialized international team, Parker’s capability is based on understanding the specific needs of your business and providing a total solution.BrewingWine making DairyBottled water IngredientsAir / Gas Liquid VentIndustrial Liquid / Pre-filtrationT-Port T-Port Open T-Port In-line In-line T-Port SteppedAir / CO 2 / Nitrogen filtrationTop pressure / blanketing to water , beer , wine or dairy Compressed air to blow dry clean bottles or cans Industrial fermentation Steam (up to 3.5 Bar)Water , beer , wineClarification, stabilisation and sterilisation to remove particles or microorganisms.Industrial or food and beverage tank vents Vent to atmosphere Water treatment Prefiltration ClarificationApplicationsThe PHP housing range is specifically designed for liquid applications in:BeerWineBottled WaterSuitable for use with PED Group 2 liquid and gas.AvailabilityThe PHP liquid filter housing range is available for 1 to 30 round cartridges. They will accept Parker’s full range of C-Style (226) or D-Style (222) liquid filter cartridges of nominal length 10¨ to 40¨.MaterialsApplicationsThe PHB multi range is specifically designed for high flow rate gas filtration applications in:BeerWineBottled WaterDairyIndustrial FermentationSuitable for use with PED Group 2 gas.AvailabilityThe PHB multi gas filter housing is availablein sizes from 3 up to 32 round. These housingswill accept Parker’s full range of C-Style (226) gas filter cartridges of nominal lengths 10”, 20” and 30”.ApplicationsThe PHB filter housing range is specifically designed for gas filtration applications in:BeerWineBottled WaterDairySuitable for use with PED Group 1 & 2 Gas. AvailabilityThe PHB Demi gas filter housing range is available for Parker’s full range of Trueseal (126) gas filter cartridges of nominal lengths 2.5” and 5”.MaterialsAISI 316L grade stainless steel is used for all wettedApplicationsThe PHB filter housing range is specifically designed for gas filtration applications in:BeerWineBottled WaterDairySuitable for use with PED Group 2 Gas.AvailabilityThe PHB gas filter housing range is available for Parker’s full range of C-Style (226) gas filter cartridges of nominal lengths 5” to 30”.MaterialsApplicationsThe PHF filter housing range is specifically designed for low flow rate liquid and gas applications in:BeerWineBottled WaterDairySuitable for use with PED Group 1 and 2 liquids and gas.AvailabilityThe PHF filter housing range is available in a single round, demi format. These housings will accept Parker’s full range of Z-Style (116) liquid and gas filter cartridges of nominal lengths 2.5” and 5”.ApplicationsThe PHI filter housing range is specifically designed for in-line liquid and gas applications in:BeerWineBottled WaterDairySuitable for use with PED Group 2 liquid and gas.AvailabilityThe PHI filter housing range will accept Parker’s full range of C-Style (226) liquid and gas filter cartridges, of nominal lengths 5¨ to 40¨.MaterialsApplicationsThe PHV vent filter housing range is specifically designed for food and beverage applications that require filtration of tank air to atmosphere in:BeerWineBottled WaterDairyAvailabilityThe PHV vent filter housings are available as single and multi-round for 1, 3, 5, 8 and 12 filter cartridges. The series will accept Parker’s full range of C-Style (226) filter cartridges of nominal lengths 10¨, 20¨ and 30¨.ApplicationsThe PHW single round filter housing range is specifically designed for liquid pre-filtration applications in:BeerWineBottled WaterThe range is suitable for use with PED Group 1 and 2 liquids, and PED Group 2 gas.AvailabilityThe PHW single cartridge housing range can accept Parker’s full range of C-Style (226), D-Style (222) and DOE cartridges of nominal length 10¨ to 40¨.ApplicationsThe PHW multi round filter housing is specifically designed for liquid pre-filtration applications in:BeerWineBottled WaterSuitable for use with PED Group 2 liquids.AvailabilityThe PHW multi round housing range is available for 3, 5 or 8 filter cartridges. This housing is available to accept Parker’s full range of C-Style (226), D-Style (222) and DOE liquid filter cartridges of nominal lengths 20”, 30” and 40”.HousingsStandard Housing - Ordering Information * Single round onlySilicone foam rubber heating jacket with internally meshed heating wires. Open longitudinal slit down the length to slide over a housing.Five standard sizes, A (Demi), K, 10¨, 20¨, 30¨.230 (240) volts supply, not grounded.Protection rating: IP65.Design standards: EN 60519-1 and 2.Temperature sensor, PT100, built-in with 1m cable. ISOPAD temperature controller.On / Off switch.230 V live and neutral.Maximum ambient temperature 55 °C (131 °F).Set temperature display: 8mm red LED.Actual temperature display: 10mm green LED.Protection rating: IP65.Design standards: EN61010-1.1m power cable. (available as accessory kit)Volt free output for an alarm.Comprehensive installation, operation and maintenanceinstructions (IOMI).PID Control- SSR Output (12V)- Alarm relay (2.4A)The heating jacket offers support to Demi A,K to 30¨housings including:PHBPHIPHV*Dim ‘A’Dim ‘B’Dim ‘C’Signal out7 pin hirschmann male1m black cablePower In4 pin hirschmann female1m brown/red cable200188121892ON / OFFSwitchAlarm connectionHirschmann 7 pin male with capHirschmann 4 PIN male - power in (to controller)Hirschmann 7 PIN female - PT100 signal inHirschmann 4 PIN female - Power out (to heater)Part Code Part Number Housing Size Supply Voltage ControllerXBHSI05-230V6395031455” Demi230V IncludedXBHSI05KN-230V6395043995¨230V IncludedXBHSI10N-230V63950440010¨230V IncludedXBHSI20N-230V63950440120¨230V IncludedXBHSI10N-230V-NC63950440310¨230V Not IncludedXBHSI20N-230V-NC63950440420¨230V Not IncludedAccessoriesPart Code Part Number DescriptionXBHXT2M639503496 2 meter power and signal cable extensionXBHPS1M-PSEU639503199Power cable with European plugXBHPS1M-PSUK639503200Power cable with UK plugXBHPS1M-PS639503640Power cable with no plugKit excludes mains power cable.Together with Agidens Process Automation, Parker can One prefilter stage, one final filter stageFlow range: 40-100hl/hr One prefilter stage, two final filters (duplex)Flow range: 100-300l/hr Two prefilters (duplex), four final filters (duplex)Flow range: 300-600l/hr PREPOR NGHIGH FLOW TETPOR IIBEVPOR BRTURBOSEPBEVPOR PHValairdata 3BEVPOR PSBevcheck Automated SystemsCSM 11CSM 12CSM 24PREPOR PPASEPT-XHIGH FLOW BIO-XBEVPOR MHBevcheck PlusParker Hannifin Manufacturing Ltd Bioscience Filtration - EMEA Durham Road, Birtley, Co. DurhamDH3 2SF, England。

Parker RF7系列低压滤器说明说明书

ApplicationsElement Condition Indicator - True pressure differential - Know, at a glance, when to change the ﬁ lter element - Gauge also availableDiffuser Tube- Disperses return ﬂ ow below reservoir ﬂ uid level - Prevents ﬂ uid aeration - Closed bottom provides for even ﬂ uid dispersal- Prevents objects from falling into the reservoir during element servicingCartridge/Element Handle- Easy to remove entire assembly for servicingCover Lock-Band with “T” Handle- Easy access for servicing- No loose parts to remove and handle- No special tools required for removalTwo-Piece Construction (Head/Tube)- Easy in-tank mountingBypass Filter Screen - Prevents grosscontamination from passing through the ﬁ lter — even during bypass- Mobile equipment - Power unit fabricators -Off-line ﬁ lter loopsThe Parker RF7 ﬁ lter is designed for those applications where depend a ble, yet economical, return line system protection is required. The in-tank mounting design makes the RF7 ideally suited for use by power unit fabricators and mobile equipment manufacturers...or anyone who views equipment space at a premium, but not at the expense of performance.Bypass Valves- Virtually zero leakage - Multiple valves for high ﬂ owVent- For variable displacementpump applicationsElement FeaturesGasket Ring Seal- Positive sealing foroptimum elementefﬁ ciencyInside each Parker Filter... a quality Parker ElementThe important item in a ﬁ lter assembly is the element. It has to capture and hold contaminants that can damage or stop a machine...while at the same time allowing the required ﬂ ow of clean ﬂ uid so the machine can function properly.There are many ways to design and build an element, and it’s easy to produce a low cost element. However, cost is not a good selection criteria... especially when the risk is loss of critical performance.For instance, consider wire mesh reinforcement. Not all ﬁ lter elements have it. It’s used in Parker elements to keep the pleats from collapsing or bunching.If pleats bunch, the effective surface area of the element is reduced,excessive pressure drop develops, and the ﬁ lter assembly may go into the bypass mode. This condition wastes energy and allows unﬁ ltered ﬂ uid ﬂ ow back into the system, effectively shortening ﬁ lter life.Protective Perforated Cylinder- Necessary for inside-to-outside ﬂ ow - Prevents media “blow out”Wire Reinforced Media (Not Visible)- Prevents pleat bunching- Helps prevent media migration - Maintains media efﬁ ciencyEngineered Element Design- The right combination of pleat depth and number of pleats means lower pressure losses (longer life)- Dirt holding capability is maximized for less frequent element change-outElements for EveryApplication- Standard Microglass III media for long life and excellent system protection - Economical celluloseelements also availableRF7-1 Element Performance01002003004005001086420LPMP S I DGPMBAR01002003004005001086420LPMP S I DGPM0.60.50.40.30.20.10.0BARFlow vs. Pressure LossResults typical from Multi-pass tests run per test standard ISO 16889 @ 50 gpm to 50 psid terminal - 10 mg/L BUGLRefer to Appendix on pages 264-265 for relationship to test standard ISO 4572.RF7-2 Element Performance020040060080010001086420LPMP S I DGPM0.60.50.40.30.20.10.0BAR020040060080010001086420LPMP S I DGPMBARResults typical from Multi-pass tests run per test standard ISO 16889 @ 80 gpm to 50 psid terminal - 10 mg/L BUGLRefer to Appendix on pages 264-265 for relationship to test standard ISO 4572.Flow vs. Pressure LossSpeciﬁ cationsPressure Ratings:Maximum Allowable Operating Pressure (MAOP): 150 psi (10.3 bar)Design Safety Factor: 3:1Element Burst Rating: 50 psid (3.4 bar) minimum.Materials:Cast Aluminum Head & Cover Steel Diffuser TubeOperating Temperatures:Nitrile; -40°F to 225°F (-40°C to 107°C)Fluorocarbon; -15°F to 275°F (-26°C to 135°C)Weight (approximate):RF7-1 34 lbs. (15.4 kg)RF7-2 42 lbs. (19 kg)Indicators:Visual system pressure type (gauge or pressure switch).Visual pressure differential type.Electrical pressure differential type. 15A @ 250 VAC .5A @ 125 VDCF.I.J.RF7 SeriesHow to OrderReplacement ElementsPlease note the bolded options refl ectstandard options with a reduced lead-time. Consult factory on all other lead-timeoptions.。

SigmaAldrich EZ-Fit 过滤器单元用户指南说明书

User GuideEZ-Fit® Filtration UnitThe life science business of Merckoperates as MilliporeSigma inthe US and Canada.CoverFunnelMembraneSupport pad (blue unit only)BasePlug (blue unit bulk packaging and selected versions only)IntroductionThe EZ-Fit ® Filtration Unit is a disposable filtration device for bioburden testing of liquid samples like water, process samples, or final products. It is designed for optimizing and securing the laboratory workflow to provide time-saving and reliable microbiologicalresults. After the filtration of the sample, the membrane can be transferred and cultured on an agar plate. Alternately, on the blue unit only, liquid media can be added after the filtration, and the device converts into a Petri dish.This disposable device is designed to fit onto the EZ-Fit ® Manifold, which features specific EZ-Fit ® Filtration heads. It can also fit onto a standard #8 stopper.The EZ-Fit ® filtration device consists of:The information in this document is subject to change without notice and should not be construed as a commitment by Merck. Merck assumes no responsibility for any errors that may appear in this document. This manual is believed to be complete and accurate at the time of publication. In no event shall Merck be liable for incidental or consequential damages in connection with, or arising from, the use of this manual.Materials of constructionFunnelStyrene butadiene copolymer MembraneMixed cellulose esters, PVDF Support pad (blue unit versions only)CelluloseBaseAcrilonitrile butadiene styrene Plug (blue unit in bulk packaging & selected versions only)Low-density polyethylene DimensionsHeight100 mL: 66.5 mm (2.6 in.)250 mL: 108.5 mm (4.3 in.)Largest diameter75.8 mm (3.0 in.)Filtration surface 12.56 cm2Sterilization method Electron beamStorage conditions Store in a cool and dry place Maximum temperature of the sample45 °CFiltration1. R emove the device from the packaging by grasping the funnel.CAUTION: G rasping the cover could result inremoving the cover from the funnel.NOTE: T he devices can be stacked.2. R emove the plug from the bottom of the base (blue unit bulk packaging & selected versions only).NOTE: W hen culturing using ampoule liquidmedia, do not discard the plug as it will be used during incubation step.6. T urn the knob to the upright positionto apply vacuum to perform filtration.5. Place the membrane into a solid medium.Ampoule Liquid Media(blue units bulk packaging versions only) 1. T urn the knob to the horizontal positionto stop the vacuum.2. R emove the cover and pour the liquidmedium evenly onto the membrane.3. Q uickly perform the followingoperations:1 Turn the knob to the vertical position. 2S lightly pinch the funnel and remove it.3P lace the cover onto the base.4R eturn the knob to the horizontal position to stop the vacuum.5. R eplace the plug and twist it ontothe support.NOTE: T he devices can be stacked in the incubator.Discarding the productRefer to the materials of construction of the device for proper disposal/recycling of each component.NOTE: The funnels can be stacked to reduce waste volume.Ordering Information®®1EZ-Fit ® Manifold, 3-place for EZ-Fit ® Filtration Units EZFITEFUN3EZ-Fit ® Manifold, 6-place for EZ-Fit ® Filtration Units EZFITEFUN6EZ-Fit ® filtration head for EZ-Fit ® Filtration Units EZFITMVHE1EZ-Fit ® filtration head for EZ-Fit ® Filtration Units 3EZFITMVHE3Visit our website: /EZLit. No. MK_PG5162EN Ver. 4.0© 2020 Merck KGaA, Darmstadt, Germany and/or its affiliates. All Rights Reserved. Merck, the vibrant M, Millipore, Merck KGaAFrankfurter Strasse 250 64293 Darmstadt, Germany。

以色列ARKAL自动反冲洗过滤系统中文说明书

参数，清除运行统计
3．每季维护
打开过滤过滤单元，检查叠片的清洁状态，如有污垢，在酸液中浸泡清洗后重新装好。
4. 过冬准备：若系统不运行则排空过滤器和系统内积水 5．叠片拆装和清洗步骤
(1) 拧开过滤芯上蝴蝶母 (2) 拆去芯上压盖 (3) 撤去叠片组，放在酸液中浸泡清洗，建议三通阀改变方向，切断进水管，导通排污管，此时出水在背压作用下进入第一过滤单元并反冲洗第一过单元后由排污口排除。反洗过程一般 15 秒左右（根据设置）。此时其他过滤单元依然在过滤。 (3) 第一个过滤单元的反洗结束时间到达时，控制器终止加给该电磁阀的反洗信号，反洗阀切换回到过滤状态，过滤芯压盖靠弹簧力重新压紧叠片，第一个反洗的过滤单元又回到过滤状态。第二个反洗过滤头及该系统其后的过滤头都经过同样的运行程序，顺次完成反洗，每两个过滤头的反洗间隔数秒钟（根据设置），用于维持系统压力。在所有过滤器完成反洗后，系统又回到初始过滤状态。
最小的通道
中等的通道
最大的通道
当叠片之间的沟纹累积大量杂质后，过滤器装置通过改变进出水流方向，自动打开压紧的叠片，并喷射压力水驱动叠片高速旋转，通过压力水的冲刷和旋转的离心力使叠片得到清洗。然后再改变进出水流向，恢复初始的过滤状态。
3
2. 过滤过程
(1) 叠片被弹簧力和压盖内外压差形成的压紧力而紧紧地压在一起，形成一个紧密的过滤元件，防止水中杂质穿透；
切换回到过滤状态，过滤芯压盖靠弹簧
力重新压紧叠片，第一个反洗的过滤头
又回到过滤状态。第二个反洗过滤头及
该系统其后的过滤头都经过同样的运
行程序，顺次完成反洗，每两个过滤头
的反洗间隔 10-30 秒钟（根据设置），
用于维持系统压力，和补充储水罐中的

过滤器操作方法说明书

过滤器操作方法说明书一、概述过滤器是一种用来处理数据的工具，可以根据特定的条件筛选、转换或者删除数据。

本说明书将详细介绍过滤器的操作方法，帮助用户正确使用过滤器。

二、过滤器类型及功能1. 数据筛选过滤器数据筛选过滤器用于根据指定的条件从数据集中筛选出符合条件的数据。

用户可以根据需求设置过滤条件，比如按照日期、关键词、数值范围等条件进行筛选。

2. 数据转换过滤器数据转换过滤器可以根据用户定义的规则，对数据进行转换操作。

用户可以通过设置转换规则，比如大小写转换、日期格式转换、数值单位转换等，对数据进行相应的转换。

3. 数据删除过滤器数据删除过滤器可以根据用户定义的条件，将数据集中满足条件的数据删除。

用户可以设置需要删除的数据的条件，比如删除包含特定关键词的数据、删除超出范围的数据等。

三、过滤器操作步骤1. 打开过滤器操作界面在数据处理软件中选择过滤器功能，或者在数据集中选择需要应用过滤器的数据，点击鼠标右键，在弹出的选项中选择过滤器功能。

2. 设置过滤条件根据需要选择适当的过滤条件。

对于数据筛选过滤器，可以通过设置条件表达式来筛选符合条件的数据；对于数据转换过滤器，可以设置相应的转换规则；对于数据删除过滤器，可以设置需要删除的数据的条件。

3. 应用过滤器点击“应用”按钮，系统将根据用户设置的条件，对数据进行相应的过滤操作。

在操作完成后，系统将显示过滤后的结果数据。

4. 查看结果数据用户可以查看过滤器处理后的结果数据，可以通过滚动、筛选等操作，对结果数据进行查找、排序、进一步处理等。

四、过滤器操作注意事项1. 确定过滤条件前，请仔细分析数据集的特点和需求，避免设置不合理的条件导致结果不准确。

2. 对于大数据集的过滤操作，可能需要一定的时间，请耐心等待操作完成。

3. 在应用过滤器前，建议先做好数据备份，避免误操作导致数据丢失。

4. 如需多个过滤条件，可以使用逻辑运算符（与、或、非）组合条件。

五、常见问题解答1. 过滤器操作会对原始数据进行修改吗？过滤器操作一般不会对原始数据进行修改，而是在结果数据中进行筛选、转换或删除操作，保留原始数据的完整性。

Parker OIL-X 高效过滤器系列说明书

Compressed air contains 10 contaminants (emanating from 4 sources) which must be treated and reduced to acceptable levels for the compressed air system to operate safely, efficiently and cost effectively.Many compressed air systems use multiple compressors with individual filtration for flexibility, however for systems using compressors which deliver large volumetric air flows (typically having piping above 4” in diameter), larger capacity filtration is required.Since the introduction of the first OIL-X range, Parker has continued to develop both the compressed air filter and the standards governing compressed air quality.Constantly innovated, OIL-X has become the leading technology for compressed air filtration, providing the exact balance between air quality, energy efficiency and low lifetime costs.The Parker OIL-X Fabricated filter range is available in multiple filtration grades to cover all filtration requirements, including general purpose and high efficiency coalescing grades, general purpose and high efficiency dry particulate grades and an oil vapor reduction grade.Advantages:• Meets or exceeds the requirements for delivered air quality shown in all editions of ISO8573-1, the international standard for compressed air quality.• Deep pleated filter element – Filter media is constructed to reduce air flow velocity and pressure loss whille providing increased dirt holding capacity, and improved filtration efficiency.• Parker OIL-X coalescing and dry particulate filters are fully tested – Grades AO & AA in accordance with ISO12500-1 / ISO8573-2 for oil aerosol and ISO8573-4 for particulate & Grade ACS in accordance with ISO8573-5 for oil vapor.• Fabricated carbon steel filter vessels are manufactured in accordance with ASME Code Section VIII Division 1.• Air Quality Guarantee - The only filter range to offer a one-year air quality guarantee.OIL-X Fabricated Carbon Steel Compressed Air FiltersGrades AO, AA & ACSCoalescing, Dry Particulate & Adsorption FiltersLarge Capacity Compressed Air FiltersParker OIL-XPKR_PIS_NA_DHASME150-500AO-AA-ACS_082022© 2022 Parker Hannifin CorporationParker Hannifin Corporation Industrial Gas Filtration and Generation Division 4087 Walden Avenue Lancaster, NY 14086phone 800 343 /igfg2. Grade AA tested in accordance with ISO8573-2, ISO8573-4, and ISO12500-1. ISO12500-1 Inlet Challenge Concentration for Grade AA was 10 mg of oil aerosol per cubic meter of compressed air .3. Grades ACS tested in accordance with ISO8573-5. ISO12500-1 Inlet Challenge Concentration for Grade ACS was 40.018 mg of oil vapor per cubic meter of compressed air .4. Grade ACS in-line filter elements utilize a deep wrapped bed of carbon cloth to adsorb oil vapor and require more frequent changeouts than in-line coalescing and particulate elements. Should a 12-month service period be required, Parker OIL-X Grade OVR oil vapor reduction filters are recommended.Product Selection2. Replace [X] with “M” for filter to be fitted with manual drain OR “F” for filter to be fitted with float drain.3. Replace [Y] “X” for no differential pressure gauge OR “I” for filter to be fitted with differential pressure gauge.To correctly select a filter model, the flow rate of the filter must be adjusted for the minimum operating (inlet) pressure at the point of installation.1. Obtain the minimum operating (inlet) pressure and maximum compressed air flow rate at the inlet of the filter.2. Select the correction factor for minimum inlet pressure from the CFMIP table (always round down e.g., for 77 psi g (5.3 bar g), use 73 psi g (5 bar g) correction factor .3. Calculate the minimum filtration capacity. Minimum Filtration Capacity = Compressed Air Flow Rate x CFMIP4. Using the minimum filtration capacity, select a filter model from the flow rate tables above (filter selected must have a flow rate equal to or greater than the minimum filtration capacity).Weights and Dimensions1. Weights and dimensions shown for all models are approximate. Parker reserves the right to make changes without notification. Consult factory for general arrangement drawings.2. Weight and dimensions are for the vessels only. Height stated in table above does not consider the height of the drain fitted to the drain port.。

过滤器使用说明书

过滤器使用说明书第一部分: 引言过滤器是一种常用的设备，用于过滤，并去除液体或气体中的杂质、污染物和固体颗粒。

它们广泛应用于工业、化学、制药、食品加工等领域，以确保流体的纯净性和质量。

本文档将介绍过滤器的基本原理、使用方法和维护技巧，以帮助用户正确地使用和维护过滤器。

第二部分: 过滤器基本原理1. 过滤器类型过滤器可分为多种类型，常见的有压力过滤器、离心过滤器、溶剂过滤器和微滤器等。

每种过滤器均有其特定的过滤原理和适用范围。

2. 过滤器工作原理过滤器的基本工作原理是通过孔隙或网格的方式，将液体或气体中的固体颗粒或污染物截留在过滤介质上，从而实现过滤效果。

具体的过滤效率和排放质量将取决于过滤介质的材质和孔径大小。

第三部分: 过滤器使用方法1. 准备工作在使用过滤器之前，需要先进行准备工作。

包括检查过滤器的完整性，确认过滤介质的材质和孔径是否符合要求，以及清洗过滤器以去除可能存在的污垢和杂质。

2. 过滤器安装根据具体的过滤器类型和安装需求，选择合适的安装位置和固定方式。

确保过滤器与管道接口紧密连接，并采取必要的防漏措施。

3. 过滤器操作打开进出口阀门，并通过调节开关或控制面板等方式，调整过滤器的工作参数，如流速、压力和过滤介质的温度等。

监控过滤器的运行状态，并根据需要对过滤介质进行更换或清洗。

4. 过滤器维护定期检查过滤器的工作状态和过滤效果，如发现异常或降低的过滤效率，应及时采取相应的措施，如更换过滤介质或清洗过滤器。

同时，定期维护过滤器的操作记录，并保持过滤器周围的清洁和整洁。

第四部分: 过滤器常见故障排除1. 漏水问题如果发现过滤器存在漏水现象，首先应检查过滤器的密封性和连接部位，确保密封圈安装正确，并检查紧固螺栓是否松动。

如问题仍未解决，需要联系专业技术人员进行维修。

2. 过滤效果差如果经常发现过滤效果不佳，可能是过滤介质堵塞或饱和，需要及时更换或清洗过滤介质。

同时，检查过滤物的特性是否与过滤器的适用范围相符。

Atlas Copco AFM系列滤芯说明书

lubricant to the outlet side.Note 2) When the compressor oil mist discharge concentration is 30 mg/m3 (ANR).Note 3) Bowl O-ring and other O-rings are slightly lubricated.Note 2) Minimum operating pressure: N.O. type–0.1 MPa; N.C. type–0.1 MPa (AD27-A) and 0.15 MPa (AD37-A/47-A),Please consult with SMC separately for psi and °F unit display specifications.Note 3) Please consult with SMC for details on drain piping to fit NPT or G port sizes.Note 4) The bowl assembly includes the bowl O-ring.38A C A F A R A LA W A L A F A RA F A F M A R A W A F M A FA F M / A F D A RA L A W A t t a c h m e n t501001502000Flow rate L/min (ANR)P 1=0.3MP a P 1=0.5M P a P 1=0.7M Pa P 1=0.3M P a P 1=0.5M P a P 1=0.7M P a 501000Flow rate L/min (ANR)P1=.3M P a P1=0.5MP aP 1=0.7M P aP 1=.3MP aP 1=0.5M P aP 1=0.7M P a 100200300500400600AFM30-AFlow rate L/min (ANR)P1=0.3M P a P 1=.5M P a P 1=0.7M Pa P 1=0.3M P a P 1=0.5M P a P1=0.7M P a AFD30-A501001502000Flow rate L/min (ANR)P 1=0.3M P aP 1=0.5M P aP 1=0.7M P aP 1=0.3M P aP 1=0.5M P aP 1=0.7M P a20080010004006000AFM40-AFlow rate L/min (ANR)P 1=0.3M P aP 1=0.5M P aP 1=0.7MP a P1=0.3M P aP1=0.5M P aP 1=0.7M P a1002003005004006000AFD40-AFlow rate L/min (ANR)P1=0.3MP aP 1=0.5M P a P 1=0.7MP aP 1=0.3MP a P 1=0.5MP aP 1=0.7M P a Flow Characteristics (Representative values)When saturated with oil Initial state39Air Supply1. Install an air filter (Series AF) as a pre-filter on the inlet side of the mist separator to prevent premature clog-ging.2. Install a mist separator (Series AFM) as a pre-filter on the inlet side of the micro mist separator to prevent pre-mature clogging.3. Do not install on the inlet side of the dryer as this can cause premature clogging of the element.CautionMaintenance1. Replace the element every 2 years or when the pres-sure drop becomes 0.1 MPa, whichever comes first, to prevent damage to the element.WarningDesign1. Design the system so that the mist separator is installed in a pulsation-free location. The difference between in-ternal and external pressure inside the element should be kept within 0.1 MPa, as exceeding this value could cause damage.CautionSelection1. Do not allow air flow that exceeds the rated flow. If the air flow is allowed outside the range of the rated flow even momentarily, drainage and lubricant may splash at the outlet side or cause damage to the component.2. Do not use in a low pressure application (such as a blower). F.R.L. unit has its own minimum operating pressure depending on the equipment and is designed specifically to function with compressed air. If used be-low the minimum operating pressure, a loss of perfor-mance and malfunction can occur. Please contact SMC if an application under such conditions cannot be avoid-ed.Caution1. When the bowl is installed on themist separator, or micro mist sepa-rator, install them so that the lock button lines up to the groove of the front (or the back) of the body to avoid drop or damage of the bowl.Warning Design / Selection 1. The standard bowl for the air filter, filter regulator, and lubricator, as well as the sight dome for the lubricator and bowl guard are made of polycarbon-ate. Do not use in an environment where they are exposed to or come in contact with organic sol-vents, chemicals, cutting oil, synthetic oil, alkali, and thread lock solutions.Effects of atmosphere of organic solvents and chemicals, and where these elements are likely to adhere to the equipment.Be sure to read before handling. Refer to back cover for Safety Instructions, “Handling Precautions for SMC Products” (M-E03-3) and the Operation Manual for F.R.L. Precautions. Please download it via our website, 40A CA F A R A LA W A LA F A R A F A F M A R A W A F M A FA F M / A F DA RA L A WA t t a c h m e n tINFloat type auto drain (N.C.)Float type auto drainN.O.AFM30-A to AFM40-06-A AFD30-A to AFD40-06-AAFM20-A AFD20-AConstruction41AFM20-A AFD20-AAFM30-A to AFM40-06-A AFD30-A to AFD40-06-ADimensions42A CA F A R A L A W A L A F A R A F A F M A RA W A F M A F A F M / A F DA RA L A W A t t a c h m e n t。

Parker 食品工业滤芯说明书

Filters for the Food Industry193www.parker .com/gsfSafeguard your operations from rust, pipescale, water, and oil. The prefilters will remove contami-nants at a very high efficiency - up to 93% for 0.01 micron particles and droplets. Liquid releases from the filter cartridge to an automatic drain as rapidly as it enters the filter. This allows the filter to con-tinue removing liquids for an unlimited time without loss of efficiency or flow capacity.The final stage of filtration removes all remaining contaminates with an efficiency rating of 99.99+% at 0.01 microns. Select 1/4” to 1 1/2” line filters are constructed of aluminum with a durable powder coating designed to hold up to the dirtiest com -pressed air systems.Full-featured with differential pressure indicators, auto drains, sight glasses,pressure relief valve, and bayonet bowl-to-head connectionLifetime (20 year) warranty Continuously trap and drain liquidsRemove 99.99% of 0.01 micron particles of oil, water, and dirt from compressed air and other gases Low pressure dropApplications:These filters are ideal for safeguardingcritical production equipment from corrosive compressor condensate that can cause catastrophic failures and unexpected downtime. Ideal applications are:• Instrumentation• Air actuators and air cylinders • Pneumatic packaging machines • Pneumatic conveyors• Air operated production equipment •Air operated liftsThe Parker Balston 2 stage filter systems offer the best protection to all your pneumatic equipment and instru -mentation. These high efficiency filtration systems will eliminate costly maintenance and unexpected down-time due to contaminated compressed air.Balston 2 Stage Compressed Air Filter Systems1941-800-343-4048The Balston filter performance complies with several of the international standards as written in ISO8573-1 which is fast becoming the industry standard method for specifying compressed air purity. The followingdiagrams illustrate the various classes of purity that can be achieved by using the Balston grade DX filter media or BX media or a combination of both.Complete removal of trace quantities of oil, water, and dirt down to 0.01 microns.Removal of large quantities of oil, water, and dirt from compressed air. Prefilter to Grade BX1st Stage:Grade DXExplanation for 2 Stage Compressed Air Filter System2nd Stage:Grade BXFlow Rates Filter Housing Port Filter Flow rates SCFM (Nm 3/hr), at 4 psi (0.27 bar) drop at indicated line pressure. Refer to Principal ModelSize Cartridge Specification Charts in each product data sheet for maximum pressure rating of each housing Grade PSIG 2 (0.1) 20 (1.4) 40 (2.8) 80 (5.5) 100 (6.9) 125 (8.6) 150 (10) 200 (14) 250 (17)2A-2002N-3B1 1/4” DX 19 (32) 63 (107) 76 (129) 90 (153) 145 (246)2A-2003N-3B1 3/8"BX3 (5) 8 (14) 11 (19) 21 (36) 25 (42) 31 (53) 36 (61) 47 (80) 58 (99)2A-2004N-3B1 2A-2104N-3B1 1/2” DX 19 (32) 41 (70) 65 (110) 113 (192) 137 (233) 166 (282) 196 (333) 257 (437) 316 (537)BX 9 (15) 19 (32) 30 (51) 51 (87) 63 (107) 76 (129) 90 (153) 117 (199) 145 (246)2A-2206N-3B1 3/4” DX 37 (63) 78 (133) 123 (209) 214 (364) 259 (440) 315 (535) 371 (630) 484 (822) 596 (1013)BX 10 (17) 21 (36) 34 (58) 56 (95) 70 (119) 85 (144) 101 (172) 131 (223) 162 (275)2A-2208N-3B1 1” DX 55 (93) 115 (195) 181 (308) 314 (533) 380 (646) 463 (787) 546 (928) 711 (1208) 877 (1490)BX 11 (19) 23 (39) 37 (63) 64 (109) 77 (131) 94 (160) 111 (189) 144 (245) 178 (302)2A-2312N-3B1 1 1/2” DX 98 (167) 203 (345) 319 (542) 554 (941) 670 (1138) 816 (1386) 963 (1636) 1254 (2131) 1546 (2627)BX22 (37) 46 (78) 74 (126) 129 (219) 155 (263) 189 (321) 223 (379) 290 (493) 358 (608)ISO Class Example 1 Solid 4 Water 1 OilBalston 2000 Seriesas lubricated control valves, cylinders and parts blow-down.ADDITIONAL SPECS: Mil. Std. 282 H.E.P.A., U.S.P.H.S. 3A accepted particles for milk.use with instrument quality air.ADDITIONAL SPECS: CGA - G7.1 (Grade D & E) ISA S7.3, sFed. Std. 209 (Class 100)lubricated air tools, air motors, cylinders, shot blasting, non-frictional valves.ADDITIONAL SPECS: CGA - G7.1 (Grades A & Ba1)Auto DrainAuto Drain9 (15) 19 (32)39 (66) 51 (87) 63 (107) 90 (153) 117 (199) 145 (246)Filters for the Food Industry195Filters for the Food Industrywww.parker .com/gsfPrincipal SpecificationsNotes:1 Max. temperature with auto drain2 Max. pressure with auto drain. Max. pres-sure with manual drain is 250 psi (17 barg).3 Required for proper operation of auto drain.Ordering Information | For assistance, call toll-free at 1-800-343-4048 | 8AM to 5PM Eastern TimeAssembly Ordering Information Model P/N Replacement Cartridge Box of 5 Box of 102A-2002N-3B1 1/4” 2-Stage (DX, BX) Filter Assembly 5/100-12-DX 100-12-DX 2A-2003N-3B1 3/8” 2-Stage (DX, BX) Filter Assembly 5/100-12-BX 100-12-BX 2A-2004N-3B1 1/2” 2-Stage (DX, BX) Filter Assembly 2A-2104N-3B1 1/2" 2-Stage (DX, BX) Filter Assembly 5/100-18-DX 100-18-DX5/100-18-BX 100-18-BX2A-2206N-3B1 3/4" 2-Stage (DX, BX) Filter Assembly 5/150-19-DX 150-19-DX 5/150-19-BX 150-19-BX5/150-19-SA2A-2208N-3B1 1" 2-Stage (DX, BX) Filter Assembly 5/150-19-DX 150-19-DX 5/150-19-BX 150-19-BX5/150-19-SA2A-2312N-3B1 1” 2-Stage (DX, BX) Filter Assembly 5/200-35-DX 200-35-DX5/200-35-BX 200-35-BX4 2 each of mounting brackets are required for adequate support.5 For CRN rated assemblies add a "C" to the Model Number. Example: 2A-C2104N-3B12A-2002N-3B1, 2A-2004N-3B12A-2003N-3B12A-2104N-3B12A-2206N-3B1, 2A-2208N-3B112A-2312N-3B16.25" (16 cm)6.25" 8.3" (21 cm)10.5" (27 cm)11"13"(33 cm)17"(43 cm)。

Parker Hannifin EAPF 1 环保ATEX压力过滤器操作与维护说明书

2. TO THE USER.................................................................................................................4
3. SAFETY INSTRUCTIONS...............................................................................................5
always quote the name of the device and its serial number as indicated on the type plate. • Any parts replaced for maintenance or repair purposes shall be original Parker Hannifin spare parts. • The manufacturer reserves the right to change the device or its operation and maintenance instructions without prior notice. • This operation and maintenance manual may not be copied, displayed in public, or given to a third party.
APPENDIX A – EPF ELEMENT INSTRUCTION SHEET..................................................25
© Parker Hannifin Manufacturing Netherlands (Filtration) B.V.

Parker Filtration Guardian 移动过滤系统说明说明书

NON CONDUCTIVE CARRYING HANDLE1.7 BAR DIFFERENTIAL VISUAL INDICATOR140 MINIMUM ELEMENT REMOVAL CLEARANCEQUICK ACCESS ZERO LEAKAGE, 3/4–11.5 NH HOSE CONNECTIONSREMOVABLE ELEMENT208VIBRATION ISOLATING RUBBER FEET 4-PLS3/4–11.5 NHHOSE THREAD (OUTLET)3/4”WIRE REINFORCEDFLEXIBLE OUTLET HOSE,1.6M (63 INCHES) LENGTH3/4”WIRE REINFORCEDFLEXIBLE OUTLET HOSE,1.6M (63 INCHES) LENGTH.INLET HOSE,1.6M (63 INCHES) LENGTHINLETOUTLET152(5.98)51(2.00)ON/OFF SWITCHALTERNATIVE CUSTOMER EXCHANGEABLE1/2– 14 NPT INLET & OUTLET(PLUGGED)394(15.57)195(7.68)MOTOR IS UL RECOGNISED& CSA LISTEDVISIBLE & EASIL Y CLEANABLE INLET STRAINER mm (inches)G04394Q G04395Q G04397Q G04398Q G04400G04401G0440302Q 05Q 10Q 20Q 25W 40W WRMEDIA PART NO.2419202122232526282712311629301110139123786325144181734333515ProblemCauseSolutionDoes not startON/OFF switch Turn switch on, replace switch if defectiveNo electrical powerPlug in Guardian, check for tripped circuit breakers,check for blown fuses RectifierReplace if defectiveMotor overheated 77°C (170°F)Allow motor to cool, thermal overload will automatically reset Defective motorReplace motorDoes not start or erratic Worn motor brushes Replace motor brushesmotor noiseIntermittent start/stop operationHigh viscosity fluids High viscosity fluids can cause the motor to overheat and cycle intermittently Worn motor brushes Replace motor brushes Defective motorReplace motorHot motor Pumping under heavy load It is normal, under a heavy pumping load, for the motor to reach 71°C (160°F)Defective motorReplace motor if the motor shell temperature reaches greater than 77°C (170°F)No flow or erratic Filter housing not filled with oil Allow Guardian to run for a few secondspump noise Suction leak Check tightness of inlet fittings and hoses.Check gaskets are in place and are not damaged.Kink or restriction in the inlet hose Obstructed outlet Clear outletElement dirtyReplace or clean element Sheared pump key Replace woodruff key Defective GuardianReplace unitNo flow,erratic pump Gears bindingDisassemble Guardian and thoroughly clean the gear set.noise,motor overheats Always use the inlet strainer provided to protect the unit.Replace defective gears.No suction Plugged strainerClean or replace the inlet strainer as required.Clean relief valve.Check for damaged internal o-rings.Reduced oil flowHigh viscosity fluids High viscosity fluids can cause reduced flow, which is normal Element dirtyReplace or clean elementRelief valve stick or lodged openClean relief valve or replace if defective Partially obstructed inlet or outlet hose Clear the hose obstructionSuction leak Check tightness of inlet fittings and hose.Worn gears Replace gear setIndicator moves to Element dirtyReplace or clean elementRED areaOil extremely cold or viscous Change element to coarser micron rating Obstructed outlet Clear outlet obstruction Defective indicator Replace indicator Indicator does not No elementInstall element seem to move Defective indicator Replace indicatorHoses discolour Fluid compatibilityCertain fluids, over time, will cause the hoses to discolour.This or are hard does not impair their performance.But, some fluids will cause the hoses to become brittle, requiring replacement.Oil formation Defective shaft sealReplace the motor shaft sealunder unitPortable Filtration SystemsGuardian ®PART NUMBER MATRIXTROUBLESHOOTING GUIDETable 1Table 2Table 3Table 4T able 5T able 6T able 7F3GT4E110QI UK–SYMBOLF3DescriptionFluoroelastomer*SealsSYMBOL GT4EDescription Guardian ®Instruction leaflet language & appropriate moulded plugModel NumberCODE 12Description220/240 VAC, 50Hz 110 VAC, 50HzMotor OptionsTable 1Table 4Table 2Table 316NoneQuick Disconnect Hose ConnectionsOptionsT able 5Assigned to the Guardian by the FactoryDesign NumberTable 7Description English German French Danish Finnish CODE UK D F DK SFDescription Dutch Swedish Italian SpanishCODE NL S I ELanguage OptionsT able 6Average filtration Ratio (ISO 16889) / particle size µm(c)210751002001000 N/A N/A N/A N/A N/A 4.5N/A N/A 4.5567N/A 68.59101261117182022N/A N/A 25N/A N/A N/A N/A N/A 40N/AN/AN/APar Gel Water Removal MediaCODE 02Q 05Q 10Q 20Q 25W 40W WRDESCRIPTION Microglass IIIWoven Wire MeshElement Media Degree of Filtration147。

Parker微过滤器解决方案指南说明书

Microfiltration is playing an increasingly important role in the production of quality, stable beers for the lowest cost of operation. In order to achieve maximum control, efficiency and traceability of these critical processes, automation is an absolute requirement. Together with Agidens Process Automation, Parker can provide fully automated, integrated and supported microfiltration solutions to control the quality of your beer at the lowest production cost.111122224www.parker .com/biosciencesupport to control contamination hazards and protect the quality of your beer at the lowest cost.124444444512Cold stabilisation Pre-stabilisation Trap filtration Sterilisation of gas Water utlities / CIP1235634456Gas utilitiesAgidens Process Automation, you have access to an extensive engineering team to provide fluent system integration into your plant.445Yeast Propagationrefers to the microfiltrationof beer to remove any spoilagemicroorganisms before itis packaged.PREPOR NGBEVPOR BROne prefilter stage, one final filter stage.Flow range: 40 – 100hl/hr .Batch processing.ÜÜOne prefilter stage, two final filters (duplex). Flow range: 100 – 300hl/hr .Batch processing.ÜÜÜTwo prefilters (duplex), four final filters (duplex).Flow range: 300 – 600hl/hr .Continuous processing.ÜÜÜParker and Agidens Process Automation offer high performance filtration solutions tailored to your needs and expectations. Regardless of the plant specifics and software systems used in your brewery, we deliver integrated systems that are flexible and fully compliant with the highest standards.Are you looking to secure an automated filtration system without having to worry about a fluent integration into your plant?Agidens Process Automation and Parker not only deliver high quality products, we deliver high performance solutions tailored to your needs.To find out more visit:/ANewPartnership High performance filtrationA to Z integrated solutionInvestment with return Easy to use and maintain Years of research and development haveresulted in the highest performing filtrationsystems available in the market.• Validated retention of beer spoilage organisms• Easily integrity tested• Complete confidence in performance A fluent integration into your plant whilelimiting downtime is critical in our approach.•Extensive engineering team • Tailored solution that can be integrated intoexisting software and control system •Years of process design and automation experience • Fast and high quality integration Not only do we aim to make high performing filtration systems, we aim to make them affordable.• Adapted to expectations of any brewery • Limited integration costs • Long filter service life reduces replacement costsOur shared history in the world of breweries has allowed us to offer solutions fit to the needs of people that use them every day.• Easy to use and maintain • Wide range of service level agreements • Complete operation supportParker have a global network of scientists and engineers available to support the filtration operations in your brewery.Technical Supportemail:**************tel: +44 (0) 191 4105121Polyethersulphone 0.45 micronPolyethersulphone 0.45, 0.65 micron• Includes plenum chamber for condensation Polyethersulphone 0.45, 0.65 micron • Includes plenum chamber for condensation Polypropylene 1.0 - 40 microns• Large diameter for high flow rates and ease of change-out • Absolute retention ratings from 1 micron to 50 micron • Inside - out flow pattern ensures positive capture of Polypropylene 1.0 - 10 micronsPolyethersulphone 0.2 micronValidated microbial removal against waterborne Polypropylene expanded PTFE 0.01 - 0.2 micronLower cost maintenance and extensive working life Polypropylene 0.6 - 1.0 micron• Strong, pleated polypropylene construction for Polypropylene 0.5 - 1.0 micron• Validated yeast removal and bacterial reduction • Strong, pleated polypropylene construction for Polypropylene 1.0 - 20 micron Pre-stabilisation, membrane protection and BBT protection。

alikes空气净化器说明书

alikes空气净化器说明书
空气净化器用于净化空气中的PM2.5、甲苯，阳离子烟雾，硫酸气体，氯氧化物，一氧化碳异味及各种有机物质的沉淀。

alikes空气净化器四层复合式滤网、高效过滤、预过滤网去除毛发、头屑、粗糙颗粒物和悬浮在空气中的细小粉尘、大的颗粒物。

冷触媒催化剂过滤网去除甲醛、苯、二甲苯、总挥发性有机物等；有害气体像灰尘、烟雾、花粉、动物毛屑、细菌和霉菌孢子。

椰壳活性炭加深海藻泥固化结晶网特别混合吸附能力能够去除甲醛、苯、氨和总挥发性有机物等有害物质。

alikes空气净化器高效HEPA滤网去除PM2.5、直径在0.3微米的细小颗粒，粉尘、烟露、雾状颗粒物、宠物毛屑、霉菌、孢子、花粉、细菌、病毒。

PM2.5数值一目了然触摸控制屏，显示当前时间，室内温湿度，当前空气质量以及运行状态。

alikes空气净化器具有丰富的接口和娱乐功能四个US8接口，为智能手机及其它移动终端充电，WIFI接口可以通过智能手机及其它移动终端控制空气净化器，通过蓝牙播放智能手机及其它移动终端中的音乐，娱乐支架可以放置各种智能移动终端。

置身其中，净享生活，链接APP，远程监控，尽在掌握蓝牙连接，专注聆听。