C语言常见错误代码释义

合集下载

C语言报错整理大全

C语言错误代码及错误信息错误释义error 1: Out of memory 内存溢出error 2: Identifier expected 缺标识符error 3: Unknown identifier 未定义的标识符error 4: Duplicate identifier 重复定义的标识符error 5: Syntax error 语法错误error 6: Error in real constant 实型常量错误error 7: Error in integer constant 整型常量错误error 8: String constant exceeds line 字符串常量超过一行error 10: Unexpected end of file 文件非正常结束error 11: Line too long 行太长error 12: Type identifier expected 未定义的类型标识符error 13: Too many open files 打开文件太多error 14: Invalid file name 无效的文件名error 15: File not found 文件未找到error 16: Disk full 磁盘满error 17: Invalid compiler directive 无效的编译命令error 18: Too many files 文件太多error 19: Undefined type in pointer def 指针定义中未定义类型error 20: Variable identifier expected 缺变量标识符error 21: Error in type 类型错误error 22: Structure too large 结构类型太长error 23: Set base type out of range 集合基类型越界error 24: File components may not be files or objectsfile分量不能是文件或对象error 25: Invalid string length 无效的字符串长度error 26: Type mismatch 类型不匹配error 27：error 27：Invalid subrange base type 无效的子界基类型error 28：Lower bound greater than upper bound 下界超过上界error 29：Ordinal type expected 缺有序类型error 30：Integer constant expected 缺整型常量error 31：Constant expected 缺常量error 32：Integer or real constant expected 缺整型或实型常量error 33：Pointer Type identifier expected 缺指针类型标识符error 34：Invalid function result type 无效的函数结果类型error 35：Label identifier expected 缺标号标识符error 36：BEGIN expected 缺BEGINerror 37：END expected 缺ENDerror 38：Integer expression expected 缺整型表达式error 39：Ordinal expression expected 缺有序类型表达式error 40：Boolean expression expected 缺布尔表达式error 41：Operand types do not match 操作数类型不匹配error 42：Error in expression 表达式错误error 43：Illegal assignment 非法赋值error 44：Field identifier expected 缺域标识符error 45：Object file too large 目标文件太大error 46：Undefined external 未定义的外部过程与函数error 47：Invalid object file record 无效的OBJ文件格式error 48：Code segment too large 代码段太长error 49：Data segment too large 数据段太长error 50：DO expected 缺DOerror 51：Invalid PUBLIC definition 无效的PUBLIC定义error 52：Invalid EXTRN definition 无效的EXTRN定义error 53: Too many EXTRN definitions 太多的EXTRN定义error 54：OF expected 缺OFerror 55：INTERFACE expected 缺INTERFACEerror 56：Invalid relocatable reference 无效的可重定位引用error 57：THEN expected 缺THENerror 58：TO or DOWNTO expected 缺TO或DOWNTO error 59：Undefined forward 提前引用未经定义的说明error 61：Invalid typecast 无效的类型转换error 62：Division by zero 被零除error 63：Invalid file type 无效的文件类型error 64：Cannot read or write variables of this type 不能读写此类型变量error 65：Pointer variable expected 缺指针类型变量error 66：String variable expected 缺字符串变量error 67：String expression expected 缺字符串表达式error 68：Circular unit reference 单元UNIT部件循环引用error 69：Unit name mismatch 单元名不匹配error 70：Unit version mismatch 单元版本不匹配error 71：Internal stack overflow 内部堆栈溢出error 72：Unit file format error 单元文件格式错误error 73：IMPLEMENTATION expected 缺IMPLEMENTATIONerror 74：Constant and case types do not match 常量和CASE类型不匹配error 75：Record or object variable expected 缺记录或对象变量error 76：Constant out of range 常量越界error 77：File variable expected 缺文件变量error 78：Pointer expression expected 缺指针表达式error 79：Integer or real expression expected 缺整型或实型表达式error 80：Label not within current block 标号不在当前块内error 81：Label already defined 标号已定义error 82：Undefined label in preceding statement part 在前面未定义标号error 83：Invalid @ argument 无效的@参数error 84：UNIT expected 缺UNITerror 85: ";" expected 缺“；”error 86：":" expected 缺“：”error 87："," expected 缺“，”error 88："(" expected 缺“（”error 89：")" expected 缺“）”error 90："=" expected 缺“=”error 91：":=" expected 缺“:=”error 92："[" or "(." Expected 缺“[”或“（.”error 93: "]" or ".)" expected 缺“］”或“.）”error 94："." expected 缺“.”error 95: ".." expected 缺“..”error 96：Too many variables 变量太多error 97：Invalid FOR control variable 无效的FOR循环控制变量error 98：Integer variable expected 缺整型变量error 99：Files and procedure types are not allowed here 该处不允许文件和过程类型error 100：String length mismatch 字符串长度不匹配error 101：Invalid ordering of fields 无效域顺序error 102：String constant expected 缺字符串常量error 103：Integer or real variable expected 缺整型或实型变量error 104：Ordinal variable expected 缺有序类型变量error 105：INLINE error INLINE错误error 106：Character expression expected 缺字符表达式error 107：Too many relocation items 重定位项太多error 108：Overflow in arithmetic operation 算术运算溢出error 112：CASE constant out of range CASE常量越界error 113：Error in statement 表达式错误error 114：Cannot call an interrupt procedure 不能调用中断过程error 116：Must be in 8087 mode to compile this 必须在8087模式编译error 117：Target address not found 找不到目标地址error 118：Include files are not allowed here 该处不允许INCLUDE文件error 119：No inherited methods are accessible here 该处继承方法不可访问error 121：Invalid qualifier 无效的限定符error 122：Invalid variable reference 无效的变量引用error 123：Too many symbols 符号太多error 124：Statement part too large 语句体太长error 126：Files must be var parameters 文件必须是变量形参error 127：Too many conditional symbols 条件符号太多error 128：Misplaced conditional directive 条件指令错位error 129：ENDIF directive missing 缺ENDIF指令error 130：Error in initial conditional defines 初始条件定义错误error 131：Header does not match previous definition 和前面定义的过程或函数不匹配error 133：Cannot evaluate this expression 不能计算该表达式error 134：Expression incorrectly terminated 表达式错误结束error 135：Invalid format specifier 无效格式说明符error 136：Invalid indirect reference 无效的间接引用error 137：Structured variables are not allowed here 该处不允许结构变量error 138：Cannot evaluate without System unit 没有System单元不能计算error 139：Cannot access this symbol 不能存取符号error 140：Invalid floating point operation 无效的符号运算error 141：Cannot compile overlays to memory 不能编译覆盖模块至内存error 142：Pointer or procedural variable expected 缺指针或过程变量error 143：Invalid procedure or function reference 无效的过程或函数调用error 144：Cannot overlay this unit 不能覆盖该单元error 146：File access denied 不允许文件访问error 147：Object type expected 缺对象类型error 148：Local object types are not allowed 不允许局部对象类型error 149：VIRTUAL expected 缺VIRTUALerror 150: Method identifier expected 缺方法标识符error 151：Virtual constructors are not allowed 不允许虚构造函数error 152：Constructor identifier expected 缺构造函数标识符error 153：Destructor identifier expected 缺析构函数标识符error 154：Fail only allowed within constructors 只能在构造函数内使用Fail标准过程error 155：Invalid combination of opcode and operands 操作数与操作符无效组合error 156：Memory reference expected 缺内存引用指针error 157：Cannot add or subtract relocatable symbols 不能加减可重定位符号error 158：Invalid register combination 无效寄存器组合error 159：286/287 instructions are not enabled 未激活286/287指令error 160：Invalid symbol reference 无效符号指针error 161：Code generation error 代码生成错误error 162：ASM expected 缺ASMerror 166：Procedure or function identifier expected 缺过程或函数标识符error 167：Cannot export this symbol 不能输出该符号error 168：Duplicate export name 外部文件名重复error 169：Executable file header toerror 170：Too many segments 段太多fatal error C1004: unexpected end of file found 未找到文件末尾（可能是括号匹配问题）fatal error C1021: invalid preprocessor command '1nclude' 无效的编译预处理命令'1nclude' fatal error C1083: Cannot open include file: 'stdi.h': No such file or directory 不能打开头文件'stdi.h'，文件或文件夹不存在 error C2101: '&' on constant 不能计算常量的地址error C2059: syntax error : 'while' 在'while'附近，存在语法错误error C2061: syntax error : identifier 'x' 标识符x的附近，存在语法错误 error C2065: 'i' : undeclared identifier 变量i未定义error C2078: too many initializers 数组/结构等变量初始化时的数据太多error C2087: '<Unknown>' : missing subscript 丢失数组下标error C2106: '=' : left operand must be l-value '='的左侧应当是左值，即不能是常量 error C2115: '=' : incompatible types '='两侧的类型不兼容error C2133: 'a' : unknown size a(可能是数组名)的大小不确定。

C语言常见错误中英文对照

fatal error C1003: error count exceeds number; stopping compilation中文对照：错误太多，停止编译分析：修改之前的错误，再次编译fatal error C1004: unexpected end of file found中文对照：文件未结束分析：一个函数或者一个结构定义缺少“}”、或者在一个函数调用或表达式中括号没有配对出现、或者注释符“/*…*/”不完整等fatal error C1083: Cannot open include file: 'xxx': No such file or directory中文对照：无法打开头文件xxx：没有这个文件或路径分析：头文件不存在、或者头文件拼写错误、或者文件为只读fatal error C1903: unable to recover from previous error(s); stopping compilation中文对照：无法从之前的错误中恢复，停止编译分析：引起错误的原因很多，建议先修改之前的错误error C2001: newline in constant中文对照：常量中创建新行分析：字符串常量多行书写error C2006: #include expected a filename, found 'identifier'中文对照：#include命令中需要文件名分析：一般是头文件未用一对双引号或尖括号括起来，例如“#include stdio.h”error C2007: #define syntax中文对照：#define语法错误分析：例如“#define”后缺少宏名，例如“#define”error C2008: 'xxx' : unexpected in macro definition中文对照：宏定义时出现了意外的xxx分析：宏定义时宏名与替换串之间应有空格，例如“#define TRUE"1"”error C2009: reuse of macro formal 'identifier'中文对照：带参宏的形式参数重复使用分析：宏定义如有参数不能重名，例如“#define s(a,a) (a*a)”中参数a重复error C2010: 'character' : unexpected in macro formal parameter list中文对照：带参宏的参数表表现未知字符分析：例如“#define s(r|) r*r”中参数多了一个字符…|‟error C2014: preprocessor command must start as first nonwhite space中文对照：预处理命令前面只允许空格分析：每一条预处理命令都应独占一行，不应出现其他非空格字符error C2015: too many characters in constant中文对照：常量中包含多个字符分析：字符型常量的单引号中只能有一个字符，或是以“\”开始的一个转义字符error C2017: illegal escape sequence中文对照：转义字符非法分析：一般是转义字符位于' ' 或" " 之外，例如“char error = ' '\n;”error C2018: unknown character '0xhh'中文对照：未知的字符0xhh分析：一般是输入了中文标点符号，例如“char error = 'E'；”中“；”为中文标点符号error C2019: expected preprocessor directive, found 'character'中文对照：期待预处理命令，但有无效字符分析：一般是预处理命令的#号后误输入其他无效字符，例如“#!define TRUE 1”error C2021: expected exponent value, not 'character'中文对照：期待指数值，不能是字符分析：一般是浮点数的指数表示形式有误，例如123.456Eerror C2039: 'identifier1' : is not a member of 'idenifier2'中文对照：标识符1不是标识符的成员分析：程序错误地调用或引用结构体、共用体、类的成员error C2048: more than one default中文对照：default语句多于一个分析：switch语句中只能有一个default，删去多余的defaulterror C2050: switch expression not integral中文对照：switch表达式不是整型的分析：switch表达式必须是整型（或字符型），例如“switch ("a")”中表达式为字符串，这是非法的error C2051: case expression not constant中文对照：case表达式不是常量分析：case表达式应为常量表达式，例如“case "a"”中“"a"”为字符串，这是非法的error C2052: 'type' : illegal type for case expression中文对照：case表达式类型非法分析：case表达式必须是一个整型常量（包括字符型）error C2057: expected constant expression中文对照：期待常量表达式分析：一般是定义数组时数组长度为变量，例如“int n=10; int a[n];”中n为变量，是非法的error C2058: constant expression is not integral中文对照：常量表达式不是整数分析：一般是定义数组时数组长度不是整型常量error C2059: syntax error : 'xxx'中文对照：…xxx‟语法错误分析：引起错误的原因很多，可能多加或少加了符号xxxerror C2064: term does not evaluate to a function中文对照：无法识别函数语言分析：1、函数参数有误，表达式可能不正确，例如“sqrt(s(s-a)(s-b)(s-c));”中表达式不正确2、变量与函数重名或该标识符不是函数，例如“int i,j; j=i();”中i不是函数error C2065: 'xxx' : undeclared identifier中文对照：未定义的标识符xxx分析：1、如果xxx为cout、cin、scanf、printf、sqrt等，则程序中包含头文件有误2、未定义变量、数组、函数原型等，注意拼写错误或区分大小写。

C语言错误大全及中文解释

C语⾔错误⼤全及中⽂解释1: Ambiguous operators need parentheses — 不明确的运算需要⽤括号括起2: Ambiguous symbol xxx — 不明确的符号3: Argument list syntax error — 参数表语法错误4: Array bounds missing — 丢失数组界限符5: Array size toolarge — 数组尺⼨太⼤6: Bad character in paramenters — 参数中有不适当的字符7: Bad file name format in include directive — 包含命令中⽂件名格式不正确8: Bad ifdef directive synatax — 编译预处理ifdef有语法错9: Bad undef directive syntax — 编译预处理undef有语法错10: Bit field too large — 位字段太长11: Call of non-function — 调⽤未定义的函数12: Call to function with no prototype — 时没有函数的说明13: Cannot modify a const object — 不允许修改常量对象14: Case outside of switch — 漏掉了case 语句15: Case syntax error — Case 语法错误16: Code has no effect — 代码不可能执⾏到17: Compound statement missing{ — 分程序漏掉"{"18: Conflicting type modifiers — 不明确的类型说明符19: Constant expression required — 要求常量表达式20: Constant out of range in comparison — 在⽐较中常量超出范围21: Conversion may lose significant digits — 转换时会丢失意义的数字22: Conversion of near pointer not allowed — 不允许转换近指针23: Could not find file xxx — 找不到XXX⽂件24: Declaration missing ; — 说明缺少"；"25: Declaration syntax error — 说明中出现语法错误26: Default outside of switch — Default 出现在switch语句之外27: Define directive needs an identifier — 定义编译预处理需要标识符28: Division by zero — ⽤零作除数29: Do statement must have while — Do-while语句中缺少while部分30: Enum syntax error — 语法错误31: Enumeration constant syntax error — 枚举常数语法错误32: Error directive :xxx — 错误的编译预处理命令33: Error writing output file — 写输出⽂件错误34: Expression syntax error — 表达式语法错误35: Extra parameter in call — 调⽤时出现多余错误36: File name too long — ⽂件名太长37: Function call missing ) — 缺少右括号38: Fuction definition out of place — 函数定义位置错误39: Fuction should return a value — 函数必需返回⼀个值40: Goto statement missing label — 没有标号41: Hexadecimal or octal constant too large — 或8进制常数太⼤42: Illegal character x — ⾮法字符x43: Illegal initialization — ⾮法的初始化44: Illegal octal digit — ⾮法的8进制数字 A45: Illegal pointer subtraction — ⾮法的指针相减46: Illegal structure operation — ⾮法的结构体操作47: Illegal use of floating point — ⾮法的浮点运算48: Illegal use of pointer — 指针使⽤⾮法49: Improper use of a typedefsymbol — 类型定义符号使⽤不恰当50: In-line assembly not allowed — 不允许使⽤⾏间汇编51: Incompatible storage class — 存储类别不相容52: Incompatible type conversion — 不相容的53: Incorrect number format — 错误的数据格式54: Incorrect use of default — Default使⽤不当55: Invalid indirection — ⽆效的间接运算56: Invalid pointer addition — 指针相加⽆效57: Irreducible expression tree — ⽆法执⾏的表达式运算58: Lvalue required — 需要逻辑值0或⾮0值59: Macro argument syntax error — 宏参数语法错误60: Macro expansion too long — 宏的扩展以后太长61: Mismatched number of parameters in definition — 定义中参数个数不匹配62: Misplaced break — 此处不应出现63: Misplaced continue — 此处不应出现continue语句64: Misplaced decimal point — 此处不应出现⼩数点65: Misplaced elif directive — 不应编译预处理elif66: Misplaced else — 此处不应出现else67: Misplaced else directive — 此处不应出现编译预处理else68: Misplaced endif directive — 此处不应出现编译预处理endif69: Must be addressable — 必须是可以编址的70: Must take address of memory location — 必须存储定位的地址71: No declaration for function xxx — 没有函数xxx的说明72: No stack — 缺少堆栈73: No type information — 没有类型信息74: Non-portable pointer assignment — 不可移动的指针（地址常数）赋值75: Non-portable pointer comparison — 不可移动的指针（地址常数）⽐较76: Non-portable pointer conversion — 不可移动的指针（地址常数）转换77: Not a valid expression format type — 不合法的表达式格式78: Not an allowed type — 不允许使⽤的类型79: Numeric constant too large — 数值常太⼤80: Out of memory — 内存不够⽤81: Parameter xxx is never used — 能数xxx没有⽤到82: Pointer required on left side of -> — 符号->的左边必须是指针83: Possible use of xxx before definition — 在定义之前就使⽤了xxx（警告）84: Possibly incorrect assignment — 赋值可能不正确85: Redeclaration of xxx — 重复定义了xxx86: Redefinition of xxx is not identical — xxx的两次定义不⼀致87: Register allocation failure — 寄存器定址失败88: Repeat count needs an lvalue — 重复计数需要逻辑值89: Size of structure or array not known — 结构体或数给⼤⼩不确定90: Statement missing ; — 语句后缺少"；"91: Structure or union syntax error — 结构体或联合体语法错误92: Structure size too large — 结构体尺⼨太⼤93: Sub scripting missing ] — 下标缺少右⽅括号94: Superfluous & with function or array — 函数或数组中有多余的"&"95: Suspicious pointer conversion — 可疑的指针转换96: Symbol limit exceeded — 符号超限97: Too few parameters in call — 时的实参少于函数的参数不98: Too many default cases — Default太多(switch语句中⼀个)99: Too many error or warning messages — 错误或警告信息太多100: Too many type in declaration — 说明中类型太多101: Too much auto memory in function — 函数⽤到的局部存储太多102: Too much global data defined in file — ⽂件中全局数据太多103: Two consecutive dots — 两个连续的句点104: Type mismatch in parameter xxx — 参数xxx类型不匹配105: Type mismatch in redeclaration of xxx — xxx重定义的类型不匹配106: Unable to create output file xxx — ⽆法建⽴输出⽂件xxx107: Unable to open include file xxx — ⽆法打开被包含的⽂件xxx108: Unable to open input file xxx — ⽆法打开输⼊⽂件xxx109: Undefined label xxx — 没有定义的标号xxx110: Undefined structure xxx — 没有定义的结构xxx111: Undefined symbol xxx — 没有定义的符号xxx112: Unexpected end of file in comment started on line xxx — 从xxx⾏开始的注解尚未结束⽂件不能结束113: Unexpected end of file in conditional started on line xxx — 从xxx 开始的条件语句尚未结束⽂件不能结束114: Unknown assemble instruction — 未知的汇编结构115: Unknown option — 未知的操作116: Unknown preprocessor directive: xxx — 不认识的预处理命令xxx117: Unreachable code — ⽆路可达的代码118: Unterminated string or character constant — 字符串缺少引号119: User break — ⽤户强⾏中断了程序120: Void functions may not return a value — Void类型的函数不应有返回值121: Wrong number of arguments — 的参数数⽬错122: xxx not an argument — xxx不是参数123: xxx not part of structure — xxx不是结构体的⼀部分124: xxx statement missing ( — xxx语句缺少左括号125: xxx statement missing ) — xxx语句缺少右括号126: xxx statement missing ; — xxx缺少分号127: xxx declared but never used — 说明了xxx但没有使⽤128: xxx is assigned a value which is never used — 给xxx赋了值但未⽤过。

c语言错误大全

1、'bad suffix on number'是数字的下标错误。

2、下面为C语言的错误大全及中文解释：1: Ambiguous operators need parentheses —不明确的运算需要用括号括起2: Ambiguous symbol xxx —不明确的符号3: Argument list syntax error —参数表语法错误4: Array bounds missing —丢失数组界限符5: Array size toolarge —数组尺寸太大6: Bad character in paramenters —参数中有不适当的字符7: Bad file name format in include directive —包含命令中文件名格式不正确8: Bad ifdef directive synatax —编译预处理ifdef有语法错9: Bad undef directive syntax —编译预处理undef有语法错10: Bit field too large —位字段太长11: Call of non-function —调用未定义的函数12: Call to function with no prototype —调用函数时没有函数的说明13: Cannot modify a const object —不允许修改常量对象14: Case outside of switch —漏掉了case 语句15: Case syntax error —Case 语法错误16: Code has no effect —代码不可能执行到17: Compound statement missing{ —分程序漏掉"{"18: Conflicting type modifiers —不明确的类型说明符19: Constant expression required —要求常量表达式20: Constant out of range in comparison —在比较中常量超出范围21: Conversion may lose significant digits —转换时会丢失意义的数字22: Conversion of near pointer not allowed —不允许转换近指针23: Could not find file xxx —找不到XXX文件24: Declaration missing ; —说明缺少"；"25: Declaration syntax error —说明中出现语法错误26: Default outside of switch —Default 出现在switch语句之外27: Define directive needs an identifier —定义编译预处理需要标识符28: Division by zero —用零作除数29: Do statement must have while —Do-while语句中缺少while部分30: Enum syntax error —枚举类型语法错误31: Enumeration constant syntax error —枚举常数语法错误32: Error directive :xxx —错误的编译预处理命令33: Error writing output file —写输出文件错误34: Expression syntax error —表达式语法错误35: Extra parameter in call —调用时出现多余错误36: File name too long —文件名太长37: Function call missing ) —函数调用缺少右括号38: Fuction definition out of place —函数定义位置错误39: Fuction should return a value —函数必需返回一个值40: Goto statement missing label —Goto语句没有标号41: Hexadecimal or octal constant too large —16进制或8进制常数太大42: Illegal character x —非法字符x43: Illegal initialization —非法的初始化44: Illegal octal digit —非法的8进制数字A45: Illegal pointer subtraction —非法的指针相减46: Illegal structure operation —非法的结构体操作47: Illegal use of floating point —非法的浮点运算48: Illegal use of pointer —指针使用非法49: Improper use of a typedefsymbol —类型定义符号使用不恰当50: In-line assembly not allowed —不允许使用行间汇编51: Incompatible storage class —存储类别不相容52: Incompatible type conversion —不相容的类型转换53: Incorrect number format —错误的数据格式54: Incorrect use of default —Default使用不当55: Invalid indirection —无效的间接运算56: Invalid pointer addition —指针相加无效57: Irreducible expression tree —无法执行的表达式运算58: Lvalue required —需要逻辑值0或非0值59: Macro argument syntax error —宏参数语法错误60: Macro expansion too long —宏的扩展以后太长61: Mismatched number of parameters in definition —定义中参数个数不匹配62: Misplaced break —此处不应出现break语句63: Misplaced continue —此处不应出现continue语句64: Misplaced decimal point —此处不应出现小数点65: Misplaced elif directive —不应编译预处理elif66: Misplaced else —此处不应出现else67: Misplaced else directive —此处不应出现编译预处理else68: Misplaced endif directive —此处不应出现编译预处理endif69: Must be addressable —必须是可以编址的70: Must take address of memory location —必须存储定位的地址71: No declaration for function xxx —没有函数xxx的说明72: No stack —缺少堆栈73: No type information —没有类型信息74: Non-portable pointer assignment —不可移动的指针（地址常数）赋值75: Non-portable pointer comparison —不可移动的指针（地址常数）比较76: Non-portable pointer conversion —不可移动的指针（地址常数）转换77: Not a valid expression format type —不合法的表达式格式78: Not an allowed type —不允许使用的类型79: Numeric constant too large —数值常太大80: Out of memory —内存不够用81: Parameter xxx is never used —能数xxx没有用到82: Pointer required on left side of -> —符号->的左边必须是指针83: Possible use of xxx before definition —在定义之前就使用了xxx（警告）84: Possibly incorrect assignment —赋值可能不正确85: Redeclaration of xxx —重复定义了xxx86: Redefinition of xxx is not identical —xxx的两次定义不一致87: Register allocation failure —寄存器定址失败88: Repeat count needs an lvalue —重复计数需要逻辑值89: Size of structure or array not known —结构体或数给大小不确定90: Statement missing ; —语句后缺少"；"91: Structure or union syntax error —结构体或联合体语法错误92: Structure size too large —结构体尺寸太大93: Sub scripting missing ] —下标缺少右方括号94: Superfluous & with function or array —函数或数组中有多余的"&" 95: Suspicious pointer conversion —可疑的指针转换96: Symbol limit exceeded —符号超限97: Too few parameters in call —函数调用时的实参少于函数的参数不98: Too many default cases —Default太多(switch语句中一个)99: Too many error or warning messages —错误或警告信息太多100: Too many type in declaration —说明中类型太多101: Too much auto memory in function —函数用到的局部存储太多102: Too much global data defined in file —文件中全局数据太多103: Two consecutive dots —两个连续的句点104: Type mismatch in parameter xxx —参数xxx类型不匹配105: Type mismatch in redeclaration of xxx —xxx重定义的类型不匹配106: Unable to create output file xxx —无法建立输出文件xxx107: Unable to open include file xxx —无法打开被包含的文件xxx 108: Unable to open input file xxx —无法打开输入文件xxx109: Undefined label xxx —没有定义的标号xxx110: Undefined structure xxx —没有定义的结构xxx111: Undefined symbol xxx —没有定义的符号xxx112: Unexpected end of file in comment started on line xxx —从xxx行开始的注解尚未结束文件不能结束113: Unexpected end of file in conditional started on line xxx —从xxx 开始的条件语句尚未结束文件不能结束114: Unknown assemble instruction —未知的汇编结构115: Unknown option —未知的操作116: Unknown preprocessor directive: xxx —不认识的预处理命令xxx 117: Unreachable code —无路可达的代码118: Unterminated string or character constant —字符串缺少引号119: User break —用户强行中断了程序120: Void functions may not return a value —Void类型的函数不应有返回值121: Wrong number of arguments —调用函数的参数数目错122: xxx not an argument —xxx不是参数123: xxx not part of structure —xxx不是结构体的一部分124: xxx statement missing ( —xxx语句缺少左括号125: xxx statement missing ) —xxx语句缺少右括号126: xxx statement missing ; —xxx缺少分号127: xxx declared but never used —说明了xxx但没有使用128: xxx is assigned a value which is never used —给xxx赋了值但未用过。

C语言常见错误代码释义

C语言常见错误代码释义错误代码及错误信息错误释义error 1: Out of memory 内存溢出error 2: Identifier expected 缺标识符error 3: Unknown identifier 未定义的标识符error 4: Duplicate identifier 重复定义的标识符error 5: Syntax error 语法错误error 6: Error in real constant 实型常量错误error 7: Error in integer constant 整型常量错误error 8: String constant exceeds line 字符串常量超过一行error 10: Unexpected end of file 文件非正常结束error 11: Line too long 行太长error 12: Type identifier expected 未定义的类型标识符error 13: Too many open files 打开文件太多error 14: Invalid file name 无效的文件名error 15: File not found 文件未找到error 16: Disk full 磁盘满error 17: Invalid compiler directive 无效的编译命令error 18: Too many files 文件太多error 19: Undefined type in pointer def 指针定义中未定义类型error 20: Variable identifier expected 缺变量标识符error 21: Error in type 类型错误error 22: Structure too large 结构类型太长error 23: Set base type out of range 集合基类型越界error 24: File components may not be files or objectsfile分量不能是文件或对象error 25: Invalid string length 无效的字符串长度error 26: Type mismatch 类型不匹配error 27：error 27：Invalid subrange base type 无效的子界基类型error 28：Lower bound greater than upper bound 下界超过上界error 29：Ordinal type expected 缺有序类型error 30：Integer constant expected 缺整型常量error 31：Constant expected 缺常量error 32：Integer or real constant expected 缺整型或实型常量error 33：Pointer Type identifier expected 缺指针类型标识符error 34：Invalid function result type 无效的函数结果类型error 35：Label identifier expected 缺标号标识符error 36：BEGIN expected 缺BEGINerror 37：END expected 缺ENDerror 38：Integer expression expected 缺整型表达式error 39：Ordinal expression expected 缺有序类型表达式error 40：Boolean expression expected 缺布尔表达式error 41：Operand types do not match 操作数类型不匹配error 42：Error in expression 表达式错误error 43：Illegal assignment 非法赋值error 44：Field identifier expected 缺域标识符error 45：Object file too large 目标文件太大error 46：Undefined external 未定义的外部过程与函数error 47：Invalid object file record 无效的OBJ文件格式error 48：Code segment too large 代码段太长error 49：Data segment too large 数据段太长error 50：DO expected 缺DOerror 51：Invalid PUBLIC definition 无效的PUBLIC定义error 52：Invalid EXTRN definition 无效的EXTRN定义error 53: Too many EXTRN definitions 太多的EXTRN定义error 54：OF expected 缺OFerror 55：INTERFACE expected 缺INTERFACEerror 56：Invalid relocatable reference 无效的可重定位引用error 57：THEN expected 缺THENerror 58：TO or DOWNTO expected 缺TO或DOWNTOerror 59：Undefined forward 提前引用未经定义的说明error 61：Invalid typecast 无效的类型转换error 62：Division by zero 被零除error 63：Invalid file type 无效的文件类型error 64：Cannot read or write variables of this type 不能读写此类型变量error 65：Pointer variable expected 缺指针类型变量error 66：String variable expected 缺字符串变量error 67：String expression expected 缺字符串表达式error 68：Circular unit reference 单元UNIT部件循环引用error 69：Unit name mismatch 单元名不匹配error 70：Unit version mismatch 单元版本不匹配error 71：Internal stack overflow 内部堆栈溢出error 72：Unit file format error 单元文件格式错误error 73：IMPLEMENTATION expected 缺IMPLEMENTATIONerror 74：Constant and case types do not match 常量和CASE类型不匹配error 75：Record or object variable expected 缺记录或对象变量error 76：Constant out of range 常量越界error 77：File variable expected 缺文件变量error 78：Pointer expression expected 缺指针表达式error 79：Integer or real expression expected 缺整型或实型表达式error 80：Label not within current block 标号不在当前块内error 81：Label already defined 标号已定义error 82：Undefined label in preceding statement part 在前面未定义标号error 83：Invalid @ argument 无效的@参数error 84：UNIT expected 缺UNITerror 85: ";" expected 缺“；”error 86：":" expected 缺“：”error 87："," expected 缺“，”error 88："(" expected 缺“（”error 89：")" expected 缺“）”error 90："=" expected 缺“=”error 91：":=" expected 缺“:=”error 92："[" or "(." Expected 缺“[”或“（.”error 93: "]" or ".)" expected 缺“］”或“.）”error 94："." expected 缺“.”error 95: ".." expected 缺“..”error 96：Too many variables 变量太多error 97：Invalid FOR control variable 无效的FOR循环控制变量error 98：Integer variable expected 缺整型变量error 99：Files and procedure types are not allowed here 该处不允许文件和过程类型error 100：String length mismatch 字符串长度不匹配error 101：Invalid ordering of fields 无效域顺序error 102：String constant expected 缺字符串常量error 103：Integer or real variable expected 缺整型或实型变量error 104：Ordinal variable expected 缺有序类型变量error 105：INLINE error INLINE错误error 106：Character expression expected 缺字符表达式error 107：Too many relocation items 重定位项太多error 108：Overflow in arithmetic operation 算术运算溢出error 112：CASE constant out of range CASE常量越界error 113：Error in statement 表达式错误error 114：Cannot call an interrupt procedure 不能调用中断过程error 116：Must be in 8087 mode to compile this 必须在8087模式编译error 117：T arget address not found 找不到目标地址error 118：Include files are not allowed here 该处不允许INCLUDE文件error 119：No inherited methods are accessible here 该处继承方法不可访问error 121：Invalid qualifier 无效的限定符error 122：Invalid variable reference 无效的变量引用error 123：Too many symbols 符号太多error 124：Statement part too large 语句体太长error 126：Files must be var parameters 文件必须是变量形参error 127：Too many conditional symbols 条件符号太多error 128：Misplaced conditional directive 条件指令错位error 129：ENDIF directive missing 缺ENDIF指令error 130：Error in initial conditional defines 初始条件定义错误error 131：Header does not match previous definition 和前面定义的过程或函数不匹配error 133：Cannot evaluate this expression 不能计算该表达式error 134：Expression incorrectly terminated 表达式错误结束error 135：Invalid format specifier 无效格式说明符error 136：Invalid indirect reference 无效的间接引用error 137：Structured variables are not allowed here 该处不允许结构变量error 138：Cannot evaluate without System unit 没有System单元不能计算error 139：Cannot access this symbol 不能存取符号error 140：Invalid floating point operation 无效的符号运算error 141：Cannot compile overlays to memory 不能编译覆盖模块至内存error 142：Pointer or procedural variable expected 缺指针或过程变量error 143：Invalid procedure or function reference 无效的过程或函数调用error 144：Cannot overlay this unit 不能覆盖该单元error 146：File access denied 不允许文件访问error 147：Object type expected 缺对象类型error 148：Local object types are not allowed 不允许局部对象类型error 149：VIRTUAL expected 缺VIRTUALerror 150: Method identifier expected 缺方法标识符error 151：Virtual constructors are not allowed 不允许虚构造函数error 152：Constructor identifier expected 缺构造函数标识符error 153：Destructor identifier expected 缺析构函数标识符error 154：Fail only allowed within constructors 只能在构造函数内使用Fail标准过程error 155：Invalid combination of opcode and operands 操作数与操作符无效组合error 156：Memory reference expected 缺内存引用指针error 157：Cannot add or subtract relocatable symbols 不能加减可重定位符号error 158：Invalid register combination 无效寄存器组合error 159：286/287 instructions are not enabled 未激活286/287指令error 160：Invalid symbol reference 无效符号指针error 161：Code generation error 代码生成错误error 162：ASM expected 缺ASMerror 166：Procedure or function identifier expected 缺过程或函数标识符error 167：Cannot export this symbol 不能输出该符号error 168：Duplicate export name 外部文件名重复error 169：Executable file header toerror 170：Too many segments 段太多。

C语言技术中的常见代码错误解析

C语言技术中的常见代码错误解析在学习和使用C语言时，我们经常会遇到各种各样的代码错误。

这些错误可能会导致程序无法正常运行，甚至崩溃。

本文将对C语言技术中的一些常见代码错误进行解析，帮助读者更好地理解和避免这些错误。

1. 语法错误语法错误是最常见的错误之一，它们通常是由于拼写错误、缺少分号或括号不匹配等问题引起的。

例如，下面的代码中缺少了一个分号：```cint a = 10```这个错误可以通过简单地在行尾添加一个分号来修复。

2. 数组越界错误数组越界错误是指访问数组时超出了数组的边界。

例如，如果一个数组有10个元素，但是我们试图访问第11个元素，就会发生数组越界错误。

这种错误可能导致程序崩溃或产生不可预测的结果。

为了避免数组越界错误，我们应该始终确保我们的数组索引在合法的范围内。

可以使用条件语句或循环来检查数组索引是否越界。

3. 空指针错误空指针错误是指试图访问空指针所引用的内存位置。

当我们声明一个指针变量但没有为其分配内存时，它的值将为NULL。

如果我们试图通过一个空指针来访问内存，就会发生空指针错误。

为了避免空指针错误，我们应该始终在使用指针之前为其分配内存，并在使用指针之后及时释放内存。

4. 逻辑错误逻辑错误是指程序中的错误逻辑或错误的算法。

这种错误可能导致程序的输出不正确或产生意外的结果。

例如，如果我们在一个循环中使用错误的条件，循环可能永远不会结束，或者我们可能会得到错误的结果。

为了避免逻辑错误，我们应该仔细检查我们的代码逻辑，并确保它符合我们的预期。

5. 内存泄漏内存泄漏是指在程序中分配了内存但没有及时释放。

如果我们反复分配内存而没有释放，最终会导致内存耗尽，从而使程序崩溃。

为了避免内存泄漏，我们应该始终在使用完内存后及时释放它。

可以使用free()函数来释放动态分配的内存。

6. 类型错误类型错误是指将一个变量赋给错误的数据类型，或者试图对不兼容的数据类型进行操作。

例如，将一个整数赋给一个字符变量，或者试图对一个字符串进行算术运算。

C语言常见错误中文解释

C语言中常见得错误汉语解释Ambiguous operators need parentheses 不明确的运算需要用括号括起Ambiguous symbol 'xxx'不明确的符号Argument list syntax error参数表语法错误Array bounds missing丢失数组界限符Array size toolarge数组尺寸太大Bad character in paramenters参数中有不适当的字符Bad file name format in include directive 包含命令中文件名格式不正确Bad ifdef directive synatax编译预处理ifdef有语法错Bad undef directive syntax编译预处理undef有语法错Bit field too large位字段太长Call of non-function调用未定义的函数Call to function with no prototype调用函数时没有函数的说明Cannot modify a const object不允许修改常量对象Case outside of switch漏掉了case 语句Case syntax errorCase 语法错误Code has no effect代码不可述不可能执行到Compound statement missing{分程序漏掉"{"Conflicting type modifiers不明确的类型说明符Constant expression required要求常量表达式Constant out of range in comparison在比较中常量超出范围Conversion may lose significant digits转换时会丢失意义的数字Conversion of near pointer not allowed 不允许转换近指针Could not find file 'xxx'找不到XXX文件Declaration missing ;说明缺少"；"Declaration syntax error说明中出现语法错误Default outside of switchDefault 出现在switch语句之外Define directive needs an identifier定义编译预处理需要标识符Division by zero用零作除数Do statement must have whileDo-while语句中缺少while部分Enum syntax error枚举类型语法错误Enumeration constant syntax error枚举常数语法错误Error directive :xxx错误的编译预处理命令Error writing output file写输出文件错误Expression syntax error表达式语法错误Extra parameter in call调用时出现多余错误File name too long文件名太长Function call missing )函数调用缺少右括号Fuction definition out of place函数定义位置错误Fuction should return a value函数必需返回一个值Goto statement missing labelGoto语句没有标号Hexadecimal or octal constant too large 16进制或8进制常数太大Illegal character 'x'非法字符xIllegal initialization非法的初始化Illegal octal digit非法的8进制数字Illegal pointer subtraction非法的指针相减Illegal structure operation非法的结构体操作Illegal use of floating point非法的浮点运算Illegal use of pointer指针使用非法Improper use of a typedefsymbol类型定义符号使用不恰当In-line assembly not allowed不允许使用行间汇编Incompatible storage class存储类别不相容Incompatible type conversion不相容的类型转换Incorrect number format错误的数据格式Incorrect use of defaultDefault使用不当Invalid indirection无效的间接运算Invalid pointer addition指针相加无效Irreducible expression tree无法执行的表达式运算Lvalue required需要逻辑值0或非0值Macro argument syntax error宏参数语法错误Macro expansion too long宏的扩展以后太长Mismatched number of parameters in definition 定义中参数个数不匹配Misplaced break此处不应出现break语句Misplaced continue此处不应出现continue语句Misplaced decimal point此处不应出现小数点Misplaced elif directive不应编译预处理elifMisplaced else此处不应出现elseMisplaced else directive此处不应出现编译预处理else Misplaced endif directive此处不应出现编译预处理endif Must be addressable必须是可以编址的Must take address of memory location 必须存储定位的地址No declaration for function 'xxx'没有函数xxx的说明No stack缺少堆栈No type information没有类型信息Non-portable pointer assignment不可移动的指针（地址常数）赋值Non-portable pointer comparison不可移动的指针（地址常数）比较Non-portable pointer conversion不可移动的指针（地址常数）转换Not a valid expression format type不合法的表达式格式Not an allowed type不允许使用的类型Numeric constant too large数值常太大Out of memory内存不够用Parameter 'xxx' is never used能数xxx没有用到Pointer required on left side of ->符号->的左边必须是指针Possible use of 'xxx' before definition 在定义之前就使用了xxx（警告）Possibly incorrect assignment赋值可能不正确Redeclaration of 'xxx'重复定义了xxxRedefinition of 'xxx' is not identical xxx的两次定义不一致Register allocation failure寄存器定址失败Repeat count needs an lvalue重复计数需要逻辑值Size of structure or array not known结构体或数给大小不确定Statement missing ;语句后缺少"；"Structure or union syntax error结构体或联合体语法错误Structure size too large结构体尺寸太大Sub scripting missing ]下标缺少右方括号Superfluous &with function or array函数或数组中有多余的"&" Suspicious pointer conversion可疑的指针转换Symbol limit exceeded符号超限Too few parameters in call函数调用时的实参少于函数的参数不Too many default casesDefault太多(switch语句中一个) Too many error or warning messages 错误或警告信息太多Too many type in declaration说明中类型太多Too much auto memory in function函数用到的局部存储太多Too much global data defined in file文件中全局数据太多Two consecutive dots两个连续的句点Type mismatch in parameter xxx参数xxx类型不匹配Type mismatch in redeclaration of 'xxx' xxx重定义的类型不匹配Unable to create output file 'xxx'无法建立输出文件xxxUnable to open include file 'xxx'无法打开被包含的文件xxxUnable to open input file 'xxx'无法打开输入文件xxxUndefined label 'xxx'没有定义的标号xxxUndefined structure 'xxx'没有定义的结构xxxUndefined symbol 'xxx'没有定义的符号xxxUnexpected end of file in comment started on line xxx 从xxx行开始的注解尚未结束文件不能结束Unexpected end of file in conditional started on line xxx 从xxx 开始的条件语句尚未结束文件不能结束Unknown assemble instruction未知的汇编结构Unknown option未知的操作Unknown preprocessor directive: 'xxx'不认识的预处理命令xxxUnreachable code无路可达的代码Unterminated string or character constant字符串缺少引号User break用户强行中断了程序Void functions may not return a valueVoid类型的函数不应有返回值Wrong number of arguments调用函数的参数数目错'xxx' not an argumentxxx不是参数'xxx' not part of structurexxx不是结构体的一部分xxx statement missing (xxx语句缺少左括号xxx statement missing )xxx语句缺少右括号xxx statement missing ;xxx缺少分号xxx' declared but never used说明了xxx但没有使用xxx' is assigned a value which is never used给xxx赋了值但未用过Zero length structure结构体的长度为零。

C语言常见错误提示中英译文

Ambiguous operators need parentheses -----------不明确的运算需要用括号括起Ambiguous symbol ''xxx'' ----------------不明确的符号Argument list syntax error ----------------参数表语法错误Array bounds missing ------------------丢失数组界限符Array size toolarge -----------------数组尺寸太大Bad character in paramenters ------------------参数中有不适当的字符Bad file name format in include directive --------------------包含命令中文件名格式不正确Bad ifdef directive synatax ------------------------------编译预处理ifdef有语法错Bad undef directive syntax ---------------------------编译预处理undef有语法错Bit field too large ----------------位字段太长Call of non-function -----------------调用未定义的函数Call to function with no prototype ---------------调用函数时没有函数的说明Cannot modify a const object ---------------不允许修改常量对象Case outside of switch ----------------漏掉了case 语句Case syntax error ------------------ Case 语法错误Code has no effect -----------------代码不可述不可能执行到Compound statement missing{ --------------------分程序漏掉"{"Conflicting type modifiers ------------------不明确的类型说明符Constant expression required ----------------要求常量表达式Constant out of range in comparison -----------------在比较中常量超出范围Conversion may lose significant digits -----------------转换时会丢失意义的数字Conversion of near pointer not allowed -----------------不允许转换近指针Could not find file ''xxx'' -----------------------找不到XXX文件Declaration missing ; ----------------说明缺少"；"Declaration syntax error -----------------说明中出现语法错误Default outside of switch ------------------ Default 出现在switch语句之外Define directive needs an identifier ------------------定义编译预处理需要标识符Division by zero ------------------用零作除数Do statement must have while ------------------ Do-while语句中缺少while部分Enum syntax error ---------------------枚举类型语法错误Enumeration constant syntax error -----------------枚举常数语法错误Error directive :xxx ------------------------错误的编译预处理命令Error writing output file ---------------------写输出文件错误Expression syntax error -----------------------表达式语法错误Extra parameter in call ------------------------调用时出现多余错误File name too long ----------------文件名太长Function call missing -----------------函数调用缺少右括号Fuction definition out of place ------------------函数定义位置错误Fuction should return a value ------------------函数必需返回一个值Goto statement missing label ------------------ Goto语句没有标号Hexadecimal or octal constant too large ------------------16进制或8进制常数太大Illegal character ''x'' ------------------非法字符xIllegal initialization ------------------非法的初始化Illegal octal digit ------------------非法的8进制数字Illegal pointer subtraction ------------------非法的指针相减Illegal structure operation ------------------非法的结构体操作Illegal use of floating point -----------------非法的浮点运算Illegal use of pointer --------------------指针使用非法Improper use of a typedefsymbol ----------------类型定义符号使用不恰当In-line assembly not allowed -----------------不允许使用行间汇编Incompatible storage class -----------------存储类别不相容Incompatible type conversion --------------------不相容的类型转换Incorrect number format -----------------------错误的数据格式Incorrect use of default --------------------- Default使用不当Invalid indirection ---------------------无效的间接运算Invalid pointer addition ------------------指针相加无效Irreducible expression tree -----------------------无法执行的表达式运算Lvalue required ---------------------------需要逻辑值0或非0值Macro argument syntax error -------------------宏参数语法错误Macro expansion too long ----------------------宏的扩展以后太长Mismatched number of parameters in definition ---------------------定义中参数个数不匹配Misplaced break ---------------------此处不应出现break语句Misplaced continue ------------------------此处不应出现continue语句Misplaced decimal point --------------------此处不应出现小数点Misplaced elif directive --------------------不应编译预处理elifMisplaced else ----------------------此处不应出现elseMisplaced else directive ------------------此处不应出现编译预处理elseMisplaced endif directive -------------------此处不应出现编译预处理endifMust be addressable ----------------------必须是可以编址的Must take address of memory location ------------------必须存储定位的地址No declaration for function ''xxx'' -------------------没有函数xxx的说明No stack ---------------缺少堆栈No type information ------------------没有类型信息Non-portable pointer assignment --------------------不可移动的指针（地址常数）赋值Non-portable pointer comparison --------------------不可移动的指针（地址常数）比较Non-portable pointer conversion ----------------------不可移动的指针（地址常数）转换Not a valid expression format type ---------------------不合法的表达式格式Not an allowed type ---------------------不允许使用的类型Numeric constant too large -------------------数值常太大Out of memory -------------------内存不够用Parameter ''xxx'' is never used ------------------能数xxx没有用到Pointer required on left side of -> -----------------------符号->的左边必须是指针Possible use of ''xxx'' before definition -------------------在定义之前就使用了xxx（警告）Possibly incorrect assignment ----------------赋值可能不正确Redeclaration of ''xxx'' -------------------重复定义了xxxRedefinition of ''xxx'' is not identical ------------------- xxx的两次定义不一致Register allocation failure ------------------寄存器定址失败Repeat count needs an lvalue ------------------重复计数需要逻辑值Size of structure or array not known ------------------结构体或数给大小不确定Statement missing ; ------------------语句后缺少"；"Structure or union syntax error --------------结构体或联合体语法错误Structure size too large ----------------结构体尺寸太大Sub scripting missing ] ----------------下标缺少右方括号Superfluous & with function or array ------------------函数或数组中有多余的"&"Suspicious pointer conversion ---------------------可疑的指针转换Symbol limit exceeded ---------------符号超限Too few parameters in call -----------------函数调用时的实参少于函数的参数不Too many default cases ------------------- Default太多(switch语句中一个)Too many error or warning messages --------------------错误或警告信息太多Too many type in declaration -----------------说明中类型太多Too much auto memory in function -----------------函数用到的局部存储太多Too much global data defined in file ------------------文件中全局数据太多Two consecutive dots -----------------两个连续的句点Type mismatch in parameter xxx ----------------参数xxx类型不匹配Type mismatch in redeclaration of ''xxx'' ---------------- xxx重定义的类型不匹配Unable to create output file ''xxx'' ----------------无法建立输出文件xxxUnable to open include file ''xxx'' ---------------无法打开被包含的文件xxxUnable to open input file ''xxx'' ----------------无法打开输入文件xxxUndefined label ''xxx'' -------------------没有定义的标号xxxUndefined structure ''xxx'' -----------------没有定义的结构xxxUndefined symbol ''xxx'' -----------------没有定义的符号xxxUnexpected end of file in comment started on line xxx ----------从xxx行开始的注解尚未结束文件不能结束Unexpected end of file in conditional started on line xxx ----从xxx 开始的条件语句尚未结束文件不能结束Unknown assemble instruction ----------------未知的汇编结构Unknown option ---------------未知的操作Unknown preprocessor directive: ''xxx'' -----------------不认识的预处理命令xxxUnreachable code ------------------无路可达的代码Unterminated string or character constant -----------------字符串缺少引号User break ----------------用户强行中断了程序Void functions may not return a value ----------------- Void类型的函数不应有返回值Wrong number of arguments -----------------调用函数的参数数目错''xxx'' not an argument ----------------- xxx不是参数''xxx'' not part of structure -------------------- xxx不是结构体的一部分xxx statement missing ( -------------------- xxx语句缺少左括号xxx statement missing ) ------------------ xxx语句缺少右括号xxx statement missing ; -------------------- xxx缺少分号xxx'' declared but never used -------------------说明了xxx但没有使用xxx'' is assigned a value which is never used ----------------------给xxx赋了值但未用过Zero length structure ------------------结构体的长度为零。

C语言常见错误代码释义之欧阳文创编

C语言常见错误代码释义错误代码及错误信息错误释义error 1: Out of memory 内存溢出error 2: Identifier expected 缺标识符error 3: Unknown identifier 未定义的标识符error 4: Duplicate identifier 重复定义的标识符error 5: Syntax error 语法错误error 6: Error in real constant 实型常量错误error 7: Error in integer constant 整型常量错误error 8: String constant exceeds line 字符串常量超过一行error 10: Unexpected end of file 文件非正常结束error 11: Line too long 行太长error 12: Type identifier expected 未定义的类型标识符error 13: Too many open files 打开文件太多error 14: Invalid file name 无效的文件名error 15: File not found 文件未找到error 16: Disk full 磁盘满error 17: Invalid compiler directive 无效的编译命令error 18: Too many files 文件太多error 19: Undefined type in pointer def 指针定义中未定义类型error 20: Variable identifier expected 缺变量标识符error 21: Error in type 类型错误error 22: Structure too large 结构类型太长error 23: Set base type out of range 集合基类型越界error 24: File components may not be files orobjectsfile分量不能是文件或对象error 25: Invalid string length 无效的字符串长度error 26: Type mismatch 类型不匹配error 27：error 27：Invalid subrange base type 无效的子界基类型error 28：Lower bound greater than upper bound 下界超过上界error 29：Ordinal type expected 缺有序类型error 30：Integer constant expected 缺整型常量error 31：Constant expected 缺常量error 32：Integer or real constant expected 缺整型或实型常量error 33：Pointer Type identifier expected 缺指针类型标识符error 34：Invalid function result type 无效的函数结果类型error 35：Label identifier expected 缺标号标识符error 36：BEGIN expected 缺BEGINerror 37：END expected 缺ENDerror 38：Integer expression expected 缺整型表达式error 39：Ordinal expression expected 缺有序类型表达式error 40：Boolean expression expected 缺布尔表达式error 41：Operand types do not match 操作数类型不匹配error 42：Error in expression 表达式错误error 43：Illegal assignment 非法赋值error 44：Field identifier expected 缺域标识符error 45：Object file too large 目标文件太大error 46：Undefined external 未定义的外部过程与函数error 47：Invalid object file record 无效的OBJ文件格式error 48：Code segment toolarge 代码段太长error 49：Data segment too large 数据段太长error 50：DO expected 缺DOerror 51：Invalid PUBLIC definition 无效的PUBLIC定义error 52：Invalid EXTRN definition 无效的EXTRN定义error 53: Too many EXTRN definitions 太多的EXTRN定义error 54：OF expected 缺OFerror 55：INTERFACE expected 缺INTERFACEerror 56：Invalid relocatable reference 无效的可重定位引用error 57：THEN expected 缺THENerror 58：TO or DOWNTO expected 缺TO或DOWNTOerror 59：Undefined forward 提前引用未经定义的说明error 61：Invalid typecast 无效的类型转换error 62：Division by zero 被零除error 63：Invalid file type 无效的文件类型error 64：Cannot read or write variables of this type 不能读写此类型变量error 65：Pointer variable expected 缺指针类型变量error 66：String variable expected 缺字符串变量error 67：String expression expected 缺字符串表达式error 68：Circular unit reference 单元UNIT部件循环引用error 69：Unit name mismatch 单元名不匹配error 70：Unit version mismatch 单元版本不匹配error 71：Internal stack overflow 内部堆栈溢出error 72：Unit file format error 单元文件格式错误error 73：IMPLEMENTATION expected 缺IMPLEMENTATIONerror 74：Constant and casetypes do not match 常量和CASE类型不匹配error 75：Record or object variable expected 缺记录或对象变量error 76：Constant out of range 常量越界error 77：File variable expected 缺文件变量error 78：Pointer expression expected 缺指针表达式error 79：Integer or real expression expected 缺整型或实型表达式error 80：Label not within current block 标号不在当前块内error 81：Label already defined 标号已定义error 82：Undefined label in preceding statement part 在前面未定义标号error 83：Invalid @ argument 无效的@参数error 84：UNIT expected 缺UNITerror 85: ";" expected 缺“；”error 86： ":" expected 缺“：”error 87： "," expected 缺“，”error 88： "(" expected 缺“（”error 89： ")" expected 缺“）”error 90： "=" expected 缺“=”error 91： ":=" expected 缺“:=”error 92： "[" or "(." Expected 缺“[”或“（.”error 93: "]" or ".)" expected 缺“］”或“.）”error 94： "." expected 缺“.”error 95: ".." expected 缺“..”error 96：Too many variables 变量太多error 97：Invalid FOR control variable 无效的FOR循环控制变量error 98：Integer variable expected 缺整型变量error 99：Files and procedure types are not allowed here 该处不允许文件和过程类型error 100：String length mismatch 字符串长度不匹配error 101：Invalid ordering of fields 无效域顺序error 102：String constant expected 缺字符串常量error 103：Integer or real variable expected 缺整型或实型变量error 104：Ordinal variable expected 缺有序类型变量error 105：INLINE error INLINE错误error 106：Character expression expected 缺字符表达式error 107：Too many relocation items 重定位项太多error 108：Overflow in arithmetic operation 算术运算溢出error 112：CASE constant out of range CASE常量越界error 113：Error in statement 表达式错误error 114：Cannot call an interrupt procedure 不能调用中断过程error 116：Must be in 8087 mode to compile this 必须在8087模式编译error 117：Target address not found 找不到目标地址error 118：Include files are not allowed here 该处不允许INCLUDE文件error 119：No inherited methods are accessible here 该处继承方法不可访问error 121：Invalid qualifier 无效的限定符error 122：Invalid variable reference 无效的变量引用error 123：Too many symbols 符号太多error 124：Statement part too large 语句体太长error 126：Files must be var parameters 文件必须是变量形参error 127：Too many conditional symbols 条件符号太多error 128：Misplaced conditional directive 条件指令错位error 129：ENDIF directive missing 缺ENDIF指令error 130：Error in initial conditional defines 初始条件定义错误error 131：Header does not match previous definition 和前面定义的过程或函数不匹配error 133：Cannot evaluate this expression 不能计算该表达式error 134：Expression incorrectly terminated 表达式错误结束error 135：Invalid format specifier 无效格式说明符error 136：Invalid indirect reference 无效的间接引用error 137：Structured variables are not allowed here 该处不允许结构变量error 138：Cannot evaluate without System unit 没有System单元不能计算error 139：Cannot access this symbol 不能存取符号error 140：Invalid floating point operation 无效的符号运算error 141：Cannot compile overlays to memory 不能编译覆盖模块至内存error 142：Pointer or procedural variable expected 缺指针或过程变量error 143：Invalid procedure or function reference 无效的过程或函数调用error 144：Cannot overlay this unit 不能覆盖该单元error 146：File access denied 不允许文件访问error 147：Object type expected 缺对象类型error 148：Local object types are not allowed 不允许局部对象类型error 149：VIRTUALexpected 缺VIRTUALerror 150: Method identifier expected 缺方法标识符error 151：Virtual constructors are not allowed 不允许虚构造函数error 152：Constructor identifier expected 缺构造函数标识符error 153：Destructor identifier expected 缺析构函数标识符error 154：Fail only allowed within constructors 只能在构造函数内使用Fail标准过程error 155：Invalid combination of opcode and operands 操作数与操作符无效组合error 156：Memory reference expected 缺内存引用指针error 157：Cannot add or subtract relocatable symbols 不能加减可重定位符号error 158：Invalid register combination 无效寄存器组合error 159：286/287 instructions are not enabled 未激活286/287指令error 160：Invalid symbol reference 无效符号指针error 161：Code generation error 代码生成错误error 162：ASM expected 缺ASMerror 166：Procedure or function identifier expected 缺过程或函数标识符error 167：Cannot export this symbol 不能输出该符号error 168：Duplicate export name 外部文件名重复error 169：Executable file header to error 170：Too many segments 段太多。

C语言报错整理大全

C语言错误代码及错误信息错误释义error 1: Out of memory 内存溢出error 2: Identifier expected 缺标识符error 3: Unknown identifier 未定义的标识符error 4: Duplicate identifier 重复定义的标识符error 5: Syntax error 语法错误error 6: Error in real constant 实型常量错误error 7: Error in integer constant 整型常量错误error 8: String constant exceeds line 字符串常量超过一行error 10: Unexpected end of file 文件非正常结束error 11: Line too long 行太长error 12: Type identifier expected 未定义的类型标识符error 13: Too many open files 打开文件太多error 14: Invalid file name 无效的文件名error 15: File not found 文件未找到error 16: Disk full 磁盘满error 17: Invalid compiler directive 无效的编译命令error 18: Too many files 文件太多error 19: Undefined type in pointer def 指针定义中未定义类型error 20: Variable identifier expected 缺变量标识符error 21: Error in type 类型错误error 22: Structure too large 结构类型太长error 23: Set base type out of range 集合基类型越界error 24: File components may not be files or objectsfile分量不能是文件或对象error 25: Invalid string length 无效的字符串长度error 26: Type mismatch 类型不匹配error 27：error 27：Invalid subrange base type 无效的子界基类型error 28：Lower bound greater than upper bound 下界超过上界error 29：Ordinal type expected 缺有序类型error 30：Integer constant expected 缺整型常量error 31：Constant expected 缺常量error 32：Integer or real constant expected 缺整型或实型常量error 33：Pointer Type identifier expected 缺指针类型标识符error 34：Invalid function result type 无效的函数结果类型error 35：Label identifier expected 缺标号标识符error 36：BEGIN expected 缺BEGINerror 37：END expected 缺ENDerror 38：Integer expression expected 缺整型表达式error 39：Ordinal expression expected 缺有序类型表达式error 40：Boolean expression expected 缺布尔表达式error 41：Operand types do not match 操作数类型不匹配error 42：Error in expression 表达式错误error 43：Illegal assignment 非法赋值error 44：Field identifier expected 缺域标识符error 45：Object file too large 目标文件太大error 46：Undefined external 未定义的外部过程与函数error 47：Invalid object file record 无效的OBJ文件格式error 48：Code segment too large 代码段太长error 49：Data segment too large 数据段太长error 50：DO expected 缺DOerror 51：Invalid PUBLIC definition 无效的PUBLIC定义error 52：Invalid EXTRN definition 无效的EXTRN定义error 53: Too many EXTRN definitions 太多的EXTRN定义error 54：OF expected 缺OFerror 55：INTERFACE expected 缺INTERFACEerror 56：Invalid relocatable reference 无效的可重定位引用error 57：THEN expected 缺THENerror 58：TO or DOWNTO expected 缺TO或DOWNTOerror 59：Undefined forward 提前引用未经定义的说明error 61：Invalid typecast 无效的类型转换error 62：Division by zero 被零除error 63：Invalid file type 无效的文件类型error 64：Cannot read or write variables of this type 不能读写此类型变量error 65：Pointer variable expected 缺指针类型变量error 66：String variable expected 缺字符串变量error 67：String expression expected 缺字符串表达式error 68：Circular unit reference 单元UNIT部件循环引用error 69：Unit name mismatch 单元名不匹配error 70：Unit version mismatch 单元版本不匹配error 71：Internal stack overflow 内部堆栈溢出error 72：Unit file format error 单元文件格式错误error 73：IMPLEMENTATION expected 缺IMPLEMENTATION error 74：Constant and case types do not match 常量和CASE类型不匹配error 75：Record or object variable expected 缺记录或对象变量error 76：Constant out of range 常量越界error 77：File variable expected 缺文件变量error 78：Pointer expression expected 缺指针表达式error 79：Integer or real expression expected 缺整型或实型表达式error 80：Label not within current block 标号不在当前块内error 81：Label already defined 标号已定义error 82：Undefined label in preceding statement part 在前面未定义标号error 83：Invalid @ argument 无效的@参数error 84：UNIT expected 缺UNITerror 85: ";" expected 缺“；”error 86：":" expected 缺“：”error 87："," expected 缺“，”error 88："(" expected 缺“（”error 89：")" expected 缺“）”error 90："=" expected 缺“=”error 91：":=" expected 缺“:=”error 92："[" or "(." Expected 缺“[”或“（.”error 93: "]" or ".)" expected 缺“］”或“.）”error 94："." expected 缺“.”error 95: ".." expected 缺“..”error 96：Too many variables 变量太多error 97：Invalid FOR control variable 无效的FOR循环控制变量error 98：Integer variable expected 缺整型变量error 99：Files and procedure types are not allowed here 该处不允许文件和过程类型error 100：String length mismatch 字符串长度不匹配error 101：Invalid ordering of fields 无效域顺序error 102：String constant expected 缺字符串常量error 103：Integer or real variable expected 缺整型或实型变量error 104：Ordinal variable expected 缺有序类型变量error 105：INLINE error INLINE错误error 106：Character expression expected 缺字符表达式error 107：Too many relocation items 重定位项太多error 108：Overflow in arithmetic operation 算术运算溢出error 112：CASE constant out of range CASE常量越界error 113：Error in statement 表达式错误error 114：Cannot call an interrupt procedure 不能调用中断过程error 116：Must be in 8087 mode to compile this 必须在8087模式编译error 117：Target address not found 找不到目标地址error 118：Include files are not allowed here 该处不允许INCLUDE文件error 119：No inherited methods are accessible here 该处继承方法不可访问error 121：Invalid qualifier 无效的限定符error 122：Invalid variable reference 无效的变量引用error 123：Too many symbols 符号太多error 124：Statement part too large 语句体太长error 126：Files must be var parameters 文件必须是变量形参error 127：Too many conditional symbols 条件符号太多error 128：Misplaced conditional directive 条件指令错位error 129：ENDIF directive missing 缺ENDIF指令error 130：Error in initial conditional defines 初始条件定义错误error 131：Header does not match previous definition 和前面定义的过程或函数不匹配error 133：Cannot evaluate this expression 不能计算该表达式error 134：Expression incorrectly terminated 表达式错误结束error 135：Invalid format specifier 无效格式说明符error 136：Invalid indirect reference 无效的间接引用error 137：Structured variables are not allowed here 该处不允许结构变量error 138：Cannot evaluate without System unit 没有System单元不能计算error 139：Cannot access this symbol 不能存取符号error 140：Invalid floating point operation 无效的符号运算error 141：Cannot compile overlays to memory 不能编译覆盖模块至内存error 142：Pointer or procedural variable expected 缺指针或过程变量error 143：Invalid procedure or function reference 无效的过程或函数调用error 144：Cannot overlay this unit 不能覆盖该单元error 146：File access denied 不允许文件访问error 147：Object type expected 缺对象类型error 148：Local object types are not allowed 不允许局部对象类型error 149：VIRTUAL expected 缺VIRTUALerror 150: Method identifier expected 缺方法标识符error 151：Virtual constructors are not allowed 不允许虚构造函数error 152：Constructor identifier expected 缺构造函数标识符error 153：Destructor identifier expected 缺析构函数标识符error 154：Fail only allowed within constructors 只能在构造函数内使用Fail标准过程error 155：Invalid combination of opcode and operands 操作数与操作符无效组合error 156：Memory reference expected 缺内存引用指针error 157：Cannot add or subtract relocatable symbols 不能加减可重定位符号error 158：Invalid register combination 无效寄存器组合error 159：286/287 instructions are not enabled 未激活286/287指令error 160：Invalid symbol reference 无效符号指针error 161：Code generation error 代码生成错误error 162：ASM expected 缺ASMerror 166：Procedure or function identifier expected 缺过程或函数标识符error 167：Cannot export this symbol 不能输出该符号error 168：Duplicate export name 外部文件名重复error 169：Executable file header toerror 170：Too many segments 段太多fatal error C1004: unexpected end of file found 未找到文件末尾（可能是括号匹配问题）fatal error C1021: invalid preprocessor command '1nclude' 无效的编译预处理命令'1nclude' fatal error C1083: Cannot open include file: 'stdi.h': No such file or directory 不能打开头文件'stdi.h'，文件或文件夹不存在 error C2101: '&' on constant 不能计算常量的地址error C2059: syntax error : 'while' 在'while'附近，存在语法错误error C2061: syntax error : identifier 'x' 标识符x的附近，存在语法错误 error C2065: 'i' : undeclared identifier 变量i未定义error C2078: too many initializers 数组/结构等变量初始化时的数据太多error C2087: '<Unknown>' : missing subscript 丢失数组下标error C2106: '=' : left operand must be l-value '='的左侧应当是左值，即不能是常量 error C2115: '=' : incompatible types '='两侧的类型不兼容error C2133: 'a' : unknown size a(可能是数组名)的大小不确定。

C语言的错误大全及中文解释

C语言的错误大全及中文解释1: Ambiguous operators need parentheses —不明确的运算需要用括号括起2: Ambiguous symbol xxx —不明确的符号3: Argument list syntax error —参数表语法错误4: Array bounds missing —丢失数组界限符5: Array size toolarge—数组尺寸太大6: Bad character in paramenters—参数中有不适当的字符7: Bad file name format in include directive —包含命令中文件名格式不正确8: Bad ifdef directive synatax—编译预处理ifdef有语法错9: Bad undef directive syntax —编译预处理undef有语法错10: Bit field too large —位字段太长11: Call of non-function —调用未定义的函数12: Call to function with no prototype —调用函数时没有函数的说明13: Cannot modify a const object —不允许修改常量对象14: Case outside of switch —漏掉了case 语句15: Case syntax error —Case 语法错误16: Code has no effect —代码不可能执行到17: Compound statement missing{ —分程序漏掉"{"18: Conflicting type modifiers —不明确的类型说明符19: Constant expression required —要求常量表达式20: Constant out of range in comparison —在比较中常量超出范围21: Conversion may lose significant digits —转换时会丢失意义的数字22: Conversion of near pointer not allowed —不允许转换近指针23: Could not find file xxx —找不到XXX文件24: Declaration missing ; —说明缺少"；"25: Declaration syntax error —说明中出现语法错误26: Default outside of switch —Default 出现在switch语句之外27: Define directive needs an identifier —定义编译预处理需要标识符28: Division by zero —用零作除数29: Do statement must have while —Do-while语句中缺少while部分30: Enum syntax error —枚举类型语法错误31: Enumeration constant syntax error —枚举常数语法错误32: Error directive :xxx —错误的编译预处理命令33: Error writing output file —写输出文件错误34: Expression syntax error —表达式语法错误35: Extra parameter in call —调用时出现多余错误36: File name too long —文件名太长37: Function call missing ) —函数调用缺少右括号38: Fuction definition out of place —函数定义位置错误39: Fuction should return a value —函数必需返回一个值40: Goto statement missing label —Goto语句没有标号41: Hexadecimal or octal constant too large —16进制或8进制常数太大42: Illegal character x —非法字符x43: Illegal initialization —非法的初始化44: Illegal octal digit —非法的8进制数字A45: Illegal pointer subtraction —非法的指针相减46: Illegal structure operation —非法的结构体操作47: Illegal use of floating point —非法的浮点运算48: Illegal use of pointer —指针使用非法49: Improper use of a typedefsymbol—类型定义符号使用不恰当50: In-line assembly not allowed —不允许使用行间汇编51: Incompatible storage class —存储类别不相容52: Incompatible type conversion —不相容的类型转换53: Incorrect number format —错误的数据格式54: Incorrect use of default —Default使用不当55: Invalid indirection —无效的间接运算56: Invalid pointer addition —指针相加无效57: Irreducible expression tree —无法执行的表达式运算58: Lvalue required —需要逻辑值0或非0值59: Macro argument syntax error —宏参数语法错误60: Macro expansion too long —宏的扩展以后太长61: Mismatched number of parameters in definition —定义中参数个数不匹配62: Misplaced break —此处不应出现break语句63: Misplaced continue —此处不应出现continue语句64: Misplaced decimal point —此处不应出现小数点65: Misplaced elif directive —不应编译预处理elif66: Misplaced else —此处不应出现else67: Misplaced else directive —此处不应出现编译预处理else68: Misplaced endif directive —此处不应出现编译预处理endif69: Must be addressable —必须是可以编址的70: Must take address of memory location —必须存储定位的地址71: No declaration for function xxx —没有函数xxx的说明72: No stack —缺少堆栈73: No type information —没有类型信息74: Non-portable pointer assignment —不可移动的指针（地址常数）赋值75: Non-portable pointer comparison —不可移动的指针（地址常数）比较76: Non-portable pointer conversion —不可移动的指针（地址常数）转换77: Not a valid expression format type —不合法的表达式格式78: Not an allowed type —不允许使用的类型79: Numeric constant too large —数值常太大80: Out of memory —内存不够用81: Parameter xxx is never used —能数xxx没有用到82: Pointer required on left side of ->—符号->的左边必须是指针83: Possible use of xxx before definition —在定义之前就使用了xxx（警告）84: Possibly incorrect assignment —赋值可能不正确85: Redeclaration of xxx —重复定义了xxx86: Redefinition of xxx is not identical —xxx的两次定义不一致87: Register allocation failure —寄存器定址失败88: Repeat count needs an lvalue—重复计数需要逻辑值89: Size of structure or array not known —结构体或数给大小不确定90: Statement missing ; —语句后缺少"；"91: Structure or union syntax error —结构体或联合体语法错误92: Structure size too large —结构体尺寸太大93: Sub scripting missing ] —下标缺少右方括号94: Superfluous & with function or array —函数或数组中有多余的"&"95: Suspicious pointer conversion —可疑的指针转换96: Symbol limit exceeded —符号超限97: Too few parameters in call —函数调用时的实参少于函数的参数不98: Too many default cases —Default太多(switch语句中一个)99: Too many error or warning messages —错误或警告信息太多100: Too many type in declaration —说明中类型太多101: Too much auto memory in function —函数用到的局部存储太多102: Too much global data defined in file —文件中全局数据太多103: Two consecutive dots —两个连续的句点104: Type mismatch in parameter xxx —参数xxx类型不匹配105: Type mismatch in redeclaration of xxx —xxx重定义的类型不匹配106: Unable to create output file xxx —无法建立输出文件xxx107: Unable to open include file xxx —无法打开被包含的文件xxx108: Unable to open input file xxx —无法打开输入文件xxx109: Undefined label xxx —没有定义的标号xxx110: Undefined structure xxx —没有定义的结构xxx111: Undefined symbol xxx —没有定义的符号xxx112: Unexpected end of file in comment started on line xxx —从xxx行开始的注解尚未结束文件不能结束113: Unexpected end of file in conditional started on line xxx —从xxx 开始的条件语句尚未结束文件不能结束114: Unknown assemble instruction —未知的汇编结构115: Unknown option —未知的操作116: Unknown preprocessor directive: xxx —不认识的预处理命令xxx117: Unreachable code —无路可达的代码118: Unterminated string or character constant —字符串缺少引号119: User break —用户强行中断了程序120: Void functions may not return a value —Void类型的函数不应有返回值121: Wrong number of arguments —调用函数的参数数目错122: xxx not an argument —xxx不是参数123: xxx not part of structure —xxx不是结构体的一部分124: xxx statement missing ( —xxx语句缺少左括号125: xxx statement missing ) —xxx语句缺少右括号126: xxx statement missing ; —xxx缺少分号127: xxx declared but never used —说明了xxx但没有使用128: xxx is assigned a value which is never used —给xxx赋了值但未用过。

C语言编程过程中的一些错误对应的汉语翻译

中文对照：switch表达式不是整型的
分析：switch表达式必须是整型（或字符型），例如“switch ("a")”中表达式为字符串，这是非法的
error C2051: case expression not constant
中文对照：case表达式不是常量
error C2051: case expression not constant
中文对照：两个指针量不能相加
分析：例如“int *pa,*pb,*a; a = pa + pb;”中两个指针变量不能进行“+”运算
error C2117: 'xxx' : array bounds overflow
中文对照：数组 xxx边界溢出
分析：一般是字符数组初始化时字符串长度大于字符数组长度，例如“char str[4] = "abcd";” error C2118: negative subscript or subscript is too large 中文对照：下标为负或下标太大
分析：头文件不存在、或者头文件拼写错误、或者文件为只读
fatal error C1903: unable to recover from previous error(s); stopping compilation
中文对照：无法从之前的错误中恢复，停止编译
分析：引起错误的原因很多，建议先修改之前的错误
error C2015: too many characters in constant 的一个转义字符
中文对照：常量中包含多个字符
error C2017: illegal escape sequence

C语言错误大全

1、意思是：在 xxx 之前应输入表达式。

2、下面为C语言的错误大全及中文解释：1: Ambiguous operators need parentheses —不明确的运算需要用括号括起2: Ambiguous symbol xxx —不明确的符号3: Argument list syntax error —参数表语法错误4: Array bounds missing —丢失数组界限符5: Array size toolarge —数组尺寸太大6: Bad character in paramenters —参数中有不适当的字符7: Bad file name format in include directive —包含命令中文件名格式不正确8: Bad ifdef directive synatax —编译预处理ifdef有语法错9: Bad undef directive syntax —编译预处理undef有语法错10: Bit field too large —位字段太长11: Call of non-function —调用未定义的函数12: Call to function with no prototype —调用函数时没有函数的说明13: Cannot modify a const object —不允许修改常量对象14: Case outside of switch —漏掉了case 语句15: Case syntax error — Case 语法错误16: Code has no effect —代码不可能执行到17: Compound statement missing{ —分程序漏掉"{"18: Conflicting type modifiers —不明确的类型说明符19: Constant expression required —要求常量表达式20: Constant out of range in comparison —在比较中常量超出范围21: Conversion may lose significant digits —转换时会丢失意义的数字22: Conversion of near pointer not allowed —不允许转换近指针23: Could not find file xxx —找不到XXX文件24: Declaration missing ; —说明缺少"；"25: Declaration syntax error —说明中出现语法错误26: Default outside of switch — Default 出现在switch语句之外27: Define directive needs an identifier —定义编译预处理需要标识符28: Division by zero —用零作除数29: Do statement must have while — Do-while语句中缺少while部分30: Enum syntax error —枚举类型语法错误31: Enumeration constant syntax error —枚举常数语法错误32: Error directive :xxx —错误的编译预处理命令33: Error writing output file —写输出文件错误34: Expression syntax error —表达式语法错误35: Extra parameter in call —调用时出现多余错误36: File name too long —文件名太长37: Function call missing ) —函数调用缺少右括号38: Fuction definition out of place —函数定义位置错误39: Fuction should return a value —函数必需返回一个值40: Goto statement missing label —Goto语句没有标号41: Hexadecimal or octal constant too large —16进制或8进制常数太大42: Illegal character x —非法字符x43: Illegal initialization —非法的初始化44: Illegal octal digit —非法的8进制数字 A45: Illegal pointer subtraction —非法的指针相减46: Illegal structure operation —非法的结构体操作47: Illegal use of floating point —非法的浮点运算48: Illegal use of pointer —指针使用非法49: Improper use of a typedefsymbol —类型定义符号使用不恰当50: In-line assembly not allowed —不允许使用行间汇编51: Incompatible storage class —存储类别不相容52: Incompatible type conversion —不相容的类型转换53: Incorrect number format —错误的数据格式54: Incorrect use of default — Default使用不当55: Invalid indirection —无效的间接运算56: Invalid pointer addition —指针相加无效57: Irreducible expression tree —无法执行的表达式运算58: Lvalue required —需要逻辑值0或非0值59: Macro argument syntax error —宏参数语法错误60: Macro expansion too long —宏的扩展以后太长61: Mismatched number of parameters in definition —定义中参数个数不匹配62: Misplaced break —此处不应出现break语句63: Misplaced continue —此处不应出现continue语句64: Misplaced decimal point —此处不应出现小数点65: Misplaced elif directive —不应编译预处理elif66: Misplaced else —此处不应出现else67: Misplaced else directive —此处不应出现编译预处理else68: Misplaced endif directive —此处不应出现编译预处理endif69: Must be addressable —必须是可以编址的70: Must take address of memory location —必须存储定位的地址71: No declaration for function xxx —没有函数xxx的说明72: No stack —缺少堆栈73: No type information —没有类型信息74: Non-portable pointer assignment —不可移动的指针（地址常数）赋值75: Non-portable pointer comparison —不可移动的指针（地址常数）比较76: Non-portable pointer conversion —不可移动的指针（地址常数）转换77: Not a valid expression format type —不合法的表达式格式78: Not an allowed type —不允许使用的类型79: Numeric constant too large —数值常太大80: Out of memory —内存不够用81: Parameter xxx is never used —能数xxx没有用到82: Pointer required on left side of -> —符号->的左边必须是指针83: Possible use of xxx before definition —在定义之前就使用了xxx（警告）84: Possibly incorrect assignment —赋值可能不正确85: Redeclaration of xxx —重复定义了xxx86: Redefinition of xxx is not identical — xxx的两次定义不一致87: Register allocation failure —寄存器定址失败88: Repeat count needs an lvalue —重复计数需要逻辑值89: Size of structure or array not known —结构体或数给大小不确定90: Statement missing ; —语句后缺少"；"91: Structure or union syntax error —结构体或联合体语法错误92: Structure size too large —结构体尺寸太大93: Sub scripting missing ] —下标缺少右方括号94: Superfluous & with function or array —函数或数组中有多余的"&" 95: Suspicious pointer conversion —可疑的指针转换96: Symbol limit exceeded —符号超限97: Too few parameters in call —函数调用时的实参少于函数的参数不98: Too many default cases — Default太多(switch语句中一个)99: Too many error or warning messages —错误或警告信息太多100: Too many type in declaration —说明中类型太多101: Too much auto memory in function —函数用到的局部存储太多102: Too much global data defined in file —文件中全局数据太多103: Two consecutive dots —两个连续的句点104: Type mismatch in parameter xxx —参数xxx类型不匹配105: Type mismatch in redeclaration of xxx — xxx重定义的类型不匹配106: Unable to create output file xxx —无法建立输出文件xxx107: Unable to open include file xxx —无法打开被包含的文件xxx108: Unable to open input file xxx —无法打开输入文件xxx109: Undefined label xxx —没有定义的标号xxx110: Undefined structure xxx —没有定义的结构xxx111: Undefined symbol xxx —没有定义的符号xxx112: Unexpected end of file in comment started on line xxx —从xxx行开始的注解尚未结束文件不能结束113: Unexpected end of file in conditional started on line xxx —从xxx 开始的条件语句尚未结束文件不能结束114: Unknown assemble instruction —未知的汇编结构115: Unknown option —未知的操作116: Unknown preprocessor directive: xxx —不认识的预处理命令xxx117: Unreachable code —无路可达的代码118: Unterminated string or character constant —字符串缺少引号119: User break —用户强行中断了程序120: Void functions may not return a value — Void类型的函数不应有返回值121: Wrong number of arguments —调用函数的参数数目错122: xxx not an argument — xxx不是参数123: xxx not part of structure — xxx不是结构体的一部分124: xxx statement missing ( — xxx语句缺少左括号125: xxx statement missing ) — xxx语句缺少右括号126: xxx statement missing ; — xxx缺少分号127: xxx declared but never used —说明了xxx但没有使用128: xxx is assigned a value which is never used —给xxx赋了值但未用过。

C语言报错整理

C语⾔报错整理
undefined reference to 意思为提⽰找不到 WinMain 函数，有⼏种可能：
1.int main() 写成了 int mian() ，即找不到函数。

2.有可能是找不到⼀个参数字节总数为16个的XXX函数。

unknown type name 'bool'
报错的意思：未知的类型名：'bool'
在C语⾔标准(C89)没有定义布尔类型，所以会报错。

⽽C99提供了⼀个头⽂件<stdbool.h>定义了bool，true代表1，false代表0。

只要导
⼊stdbool.h，就能⾮常⽅便的操作布尔类型了。

Id returned 1exit status
（1）有正在运⾏的程序，，解决办法：打卡任务管理器（ctrl+Alt+delete）关闭正在运⾏的程序
（2）函数、变量出现重名（想起蓝桥杯时，我count变量打成cout也出现此情况的低级错误），于是我⼜寻找了此错误，但是并没有。

排除代码错误就完事。

（3）编译器问题：设置编译。

c语言常见错误中英对译

#operator not followed by maco argument name #运算符后没跟宏变元名Ambiguous operators need parentheses不明确的运算需要用括号括起Ambiguous symbol ''xxx''不明确的符号Argument # missing name参数#名丧失Argument list syntax error参数表语法错误Array bounds missing丧失数组界限符Array size too large数组尺寸太大Assembler statement too long汇编语句太长Bad call of in-line function内部函数非法调用Bad character in paramenters参数中有不适当的字符Bad configuration file配置文件不正确Bad file name format in include directive包含命令中文件名格式不正确Bad ifdef directive synatax编译预处理ifdef有语法错Bad ifndef directive syntax编译预处理ifndef指令语法错误Bad undef directive syntax编译预处理undef有语法错Bit field too large位字段太长Call of non-function调用未定义的函数Call to function with no prototype调用函数时没有函数的说明Cannot modify a const object不允许修改常量对象Case outside of switchCase 出如今switch外Case statement missingCase语句漏掉Case syntax errorCase 语法错误Character constant too long字符常量太长Code has no effect代码不可述不可能执行到Compound statement missing{分程序漏掉"{"Conflicting type modifiers不明确的类型说明符Constant expression required要求常量表达式Constant out of range in comparison 在比较中常量超出范围Conversion may lose significant digits 转换时会丧失意义的数字Conversion of near pointer not allowed不允许转换近指针Could not find file ''xxx''找不到XXX文件Declaration missing ;说明缺少"；"Declaration needs type or storage class 说明必须给出类型或存储类Declaration syntax error说明中出现语法错误Default outside of switchDefault 出如今switch语句之外Define directive needs an identifier编译预处理指令Define需要标识符Division by zero用零作除数Do statement must have whileDo-while语句中缺少while部分DO while statement missing (Do while语句中漏掉了符号"("Do while statement missing；Do while语句中掉了分号Duplicate CaseCase情况不唯一Enum syntax error枚举类型语法错误Enumeration constant syntax error枚举常数语法错误Error directive :xxx错误的编译预处理命令Error writing output file写输出文件错误Expression syntax error表达式语法错误Extra parameter in call调用时出现多余参数Extra parameter in call to xxxxxx调用xxxxxxxx函数时出现了多余参数File name too long文件名太长For statement missing )For语名缺少")"For statement missing(For语句缺少"("For statement missing;For 语句缺少"；"Function call missing )函数调用缺少右括号Fuction definition out of place函数定义位置错误Fuction should return a value函数必需返回一个值Goto statement missing labelGoto语句没有标号Hexadecimal or octal constant too large 16进制或8进制常数太大If statement missing(If语句缺少"("If statement missing)If语句缺少")"Illegal character ''x''非法字符xIllegal initialization非法的初始化Illegal octal digit非法的8进制数字Illegal pointer subtraction非法的指针相减Illegal structure operation非法的构造体操作Illegal use of floating point非法的浮点运算Illegal use of pointer指针使用非法Improper use of a typedef symbol类型定义符号使用不恰当In-line assembly not allowed不允许使用行间汇编Incompatible storage class存储类别不相容Incompatible type conversion不相容的类型转换Incorrect commadn line argument:xxxxxx 不正确的命令行参数：xxxxxxxIncorrect commadn file argument:xxxxxx 不正确的配置文件参数：xxxxxxxIncorrect number format错误的数据格式Incorrect use of defaultDefault使用不当Initializer syntax error初始化语法错误Invalid indirection无效的间接运算Invalid macro argument separator无效的宏参数分隔符Invalid pointer addition指针相加无效Irreducible expression tree无法执行的表达式运算Invalid use of dot点使用错Lvalue required is assigned a value需要逻辑值0或非0值Macro argument syntax error宏参数语法错误Macro expansion too long宏的扩展太长Mismatched number of parameters in definition 定义中参数个数不匹配Misplaced break此处不应出现break语句Misplaced continue此处不应出现continue语句Misplaced decimal point此处不应出现小数点xxx''Misplaced else此处不应出现elseMisplaced else directive此处不应出现编译预处理else Misplaced endif directive此处不应出现编译预处理endif Must be addressable必须是可以编址的Must take address of memory location 必须存储定位的地址No declaration for function ''xxx''没有函数xxx的说明No file name ending无文件终止符No file names given未给出文件名No stack缺少堆栈No type information没有类型信息Non-portable pointer assignment对不可挪动的指针〔地址常数〕赋值Non-portable pointer comparison不可挪动的指针〔地址常数〕比较Non-portable pointer conversion不可挪动的指针〔地址常数〕转换Non-protable return type conversion 不可移植的返回类型转换Not a valid expression format type不合法的表达式格式Not an allowed type不允许使用的类型Numeric constant too large数值常太大Out of memory内存不够用Parameter ''xxx'' is never used参数xxx没有用到Pointer required on left side of ->符号->的左边必须是指针Possible use of ''xxx'' before definition 在定义之前就使用了xxx〔警告〕Possibly incorrect assignment赋值可能不正确Redeclaration of ''xxx''重复定义了xxxRedefinition of ''xxx'' is not identical xxx的两次定义不一致Register allocation failure存放器定址失败Repeat count needs an lvalue重复计数需要逻辑值Size of structure or array not known 构造体或数组大小不确定Statement missing ;语句后缺少"；"Structure or union syntax error构造体或结合体语法错误Structure size too large构造体尺寸太大Subscripting missing ]下标缺少右方括号Superfluous & with function or array函数或数组中有多余的"&" Suspicious pointer conversion可疑的指针转换Switch statement missing (switch 语句缺少"("Switch statement missing )switch 语句缺少")"Symbol limit exceeded符号超限Too few parameters in call函数调用参数太少Too few parameter in call to'xxxxxx'调用'xxxxxx'时参数太少Too many casesCases太多Too many decimal points十进制小数点太多Too many default casesDefault太多(switch语句中一个)Too many exponents阶码太多Too many initializers初始化太多Too many error or warning messages 错误或警告信息太多Too many storage classes in declaration 说明中存储类太多Too many type in declaration说明中类型太多Too much auto memory in function函数用到的自动存储太多Too much global data defined in file文件中全局数据太多Two consecutive dots两个连续的点Type mismatch in parameter #参数"#"类型不匹配Type mismatch in parameter # in call to 'XXXXXXX'调用'XXXXXXX'时参数#类型不匹配Type mismatch in parameter xxx参数xxx类型不匹配Type mismatch in parameter 'YYYYYYYY' in call to 'YYYYYYYY'调用'YYYYYYY'时参数'XXXXXXXX'数型不匹配Type mismatch in redeclaration of ''xxx''xxx重定义的类型不匹配Unable to create output file ''xxx''无法建立输出文件xxxUnable to create turboc.lnk不能创立turboc.lnkUnable to execute command 'xxxxxxxx'不能执行'xxxxxxxx'命令Unable to open include file 'xxx'无法翻开被包含的文件xxxUnable to open input file 'xxx'无法翻开输入文件xxxUndefined label 'xxx'没有定义的标号xxxUndefined structure 'xxx'没有定义的构造xxxUndefined symbol 'xxx'没有定义的符号xxxUnexpected end of file in comment started on line xxx 源文件在从xxx行开始的注释中意外完毕Unexpected end of file in conditional started on line xxx 源文件在#行开始的条件语句中意外完毕Unknown assemble instruction未知的汇编构造Unknown option未知的操作Unknown preprocessor directive: ''xxx''不认识的预处理命令xxxUnreachable code无路可达的代码Untermimated character constant未终结的字符常量Unterminated string未终结的串Unterminated string or character constant字符串或字符常量缺少引号User break用户强行中断了程序Value required赋值恳求Void functions may not return a valueVoid类型的函数不应有返回值While statement missing (While语句漏掉'('While statement missing )While语句漏掉')'Wrong number of arguments in of 'xxxxxxxx' 调用'xxxxxxxx'时参数个数错误'xxx' not an argumentxxx不是参数'xxx' not part of structurexxx不是构造体的一部分xxx statement missing (xxx语句缺少左括号xxx statement missing )xxx语句缺少右括号xxx statement missing ;xxx缺少分号'xxx' declared but never used说明了xxx但没有使用'xxx' is assigned a value which is never used 给xxx赋了值但未用过Zero length structure构造体的长度为零。

C语言错误信息中文解释

C语⾔错误信息中⽂解释【引⽤这⾥有很是HTML版的，很实⽤好查，但就是不能下载成CHM版的，本地是不能⽤啊。

】1.#operator not followed by macro argument name"#"运算符后⽆宏变元名。

在宏定义中，"#"⽤于标志⼀宏变元是⼀个串，因此，在"#"后⾯必须要跟随⼀个宏变元名。

2.'xxxxxxxx'not an argument'xxxxxxxx'不是函数参数。

在原程序中将该表识符定义为⼀个函数，但他没有在函数表中出现。

3.Ambiguous symbol 'xxxxxxxx'⼆义性符号'xxxxxxxx'。

两个或两个以上结构的某⼀域名相同，但它们的遍移、类型不同，因此，在变量或表达式中⽤该域但未带结构名时，，就会产⽣⼆义性。

在这种情况下，需要修改域名，或在引⽤时加上结构名。

4.Argument # missing name参数#名丢失。

参数名已脱离⽤于定义函数的函数原型。

C语⾔规定，如果函数以原型定义，该函数必须包含所有的函数名。

5.Argument list error参数表语法错误。

C语⾔规定，函数调⽤的各参数之间必须以逗号分隔，并以右括号结束，若源⽂件中含有⼀个其后不是逗号也不是右括号的参数，则会出现本错误。

6.Array bounds missing数组的界限符“]”丢失。

在源⽂件中定义了⼀个数组，但此数组没有以右⽅括号结束，则会出现本错误。

7.Arraysize too large数组长度太长。

定义的数组太长，可⽤内存不够。

8.Assembler statement too long汇编语句太长。

C语⾔规定，内部汇编语句最长不能超过480字节。

9.Bad configuration file配置⽂件不准确。

TURBOC.CFG配置⽂件中包含不是合适命令⾏选择项的⾮注释⽂字。