技术进口合同范本

合集下载

外贸进口合同范本8篇

外贸进口合同范本8篇

外贸进口合同范本8篇篇1合同编号:XXXXXX甲方(买方):____________________乙方(卖方):____________________鉴于甲、乙双方本着互惠互利、友好合作的原则,经平等协商,就甲方向乙方进口商品事宜达成如下协议:一、商品名称、规格型号、数量及价格商品名称:____________________规格型号:____________________数量:____________________(单位:台/套/公斤等)价格:____________________(单价及总价)具体以双方确认的订单为准。

二、交货期限及方式1. 交货期限:乙方应在合同签署后_____天内将商品交付给甲方。

如遇特殊情况,双方应友好协商解决。

2. 交货方式:乙方应按照甲方的要求,将商品安全送达甲方指定地点。

三、支付方式及期限1. 甲方应在合同签署后_____天内支付_____%的预付款给乙方。

2. 乙方在发货前,甲方应支付剩余款项。

3. 付款方式为_____(如:电汇、信用证等)。

四、商品质量保证1. 乙方应保证所售商品的质量符合甲方要求,不得有假冒伪劣、以次充好等行为。

2. 如因商品质量问题造成甲方损失,乙方应承担相应责任。

五、违约责任1. 若甲方未按约定时间支付货款,乙方有权解除本合同,并保留追究甲方违约责任的权利。

2. 若乙方未按约定时间交货,应支付逾期交货违约金,并承担因此给甲方造成的损失。

3. 若因不可抗力因素导致合同无法履行,双方均不承担违约责任。

六、争议解决方式1. 本合同的签订、履行、解释及争议解决均适用中华人民共和国法律。

2. 若双方在合同履行过程中发生争议,应首先友好协商解决;协商不成的,任何一方均有权向合同签订地人民法院提起诉讼。

七、保密条款双方应对本合同内容及在合同履行过程中获知的对方商业秘密、技术秘密等信息予以保密,未经对方许可,不得向第三方泄露。

八、其他条款1. 本合同一式两份,甲乙双方各执一份。

技术进口合同范本(英文)

技术进口合同范本(英文)

技术进口合同范本(英文)Contract for Equipment Sales and Technology LicensingContract No. ____________________This Contract (hereinaft er referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at _________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a com pany incorporated and existing under the laws of the People’s Republic of China with its registered address at _________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:Article 1 Definitions1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.1.3 “Contract” means this Contract sign ed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.1.5 “Destination Airport” refers to _____________Airport.1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.1.11 “Know-how”refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.1.13 “Patent”refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.1.19 “Warranty Period” means the period of the w arranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.Article 2 Scope of the Contract2.1 The Seller’s Obligation2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.2.2 The Buyer’s Obligation2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run,Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix3.2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.Article 3 Grant of License3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning,Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.3.4 Territory3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.Article 4 Price4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).The breakdown price is as follows:The price for Equipment is __________(say _______________________ only).Fee for design is __________(say _______________________ only).Fee for Technical Documentations is __________(say _______________________ only).License fee is __________________(Say: _________________ only)4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2000, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the B uyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.4.2.3 The above price is fixed and firm.4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.Article 5 Payment5.1 Down PaymentWithin ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.......................The Beginning of Option.......................5.2 [Option One: Payment by Sight L/C]The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:(a) Bill of Lading in one (1) original and ___ ( ) copies;(b) Commercial Invoice in one (1) original and ___ ( ) copies;(c) Packing list in one (1) original and ___ ( ) copies;(d) Certificate of Origin in one (1) original and ___ ( ) copies;(e) Insurance Policy in one (1) original and ___ ( ) copies;5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;(b)One ( 1 ) copy of commercial invoice.5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;b) One (1) copy of Commercial Invoice.5.2 [Option Two: Payment under a L/G]The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.......................The End of Option.......................5.3 All the banking charges incurred in the Seller’s ba nk shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.Article 6 Delivery of Equipment and Technical Documentation6.1 The Delivery of the Equipment6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.6.1.3 The port of shipment is ____, while the port of destination is ____.6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:(a) Contract number(b) Name of the vessel and loading port(c) Name of the Equipment shipped(d) Number and date of Bill of Lading(e) Total volume(f) Total gross and net weight(g) Total number of packages/cases6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:(a) Bill of Lading(b) Commercial Invoice(c) Packing List(d) Certificate of Origin(e) Insurance Policy.6.2 The Late Delivery of the Equipment6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:(a) From the first week to the fourth week, the liquidated damages shall be____ ( ) percent of the value of the delayed portion of the Equipment perweek(b) From the fifth week to the eighth week, the liquidated damages shall be____ ( ) percent of the value of the delayed portion of the Equipment per week(c) From the ninth week, the liquidated damages shall be ____ ( ) percent ofthe value of the delayed portion of the Equipment per week6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the li quidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.6.3 The Delivery of the Technical Documentation6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Selle r shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.Article 7 Packing and Marking7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:(a) Destination(b) Consignee(c) Contract number(d) Shipping mark(e) Gross/net weight (kg)(f) Case/ bale number(g) Dimensions: L x W x H (cm)7.3 Each package shall contain one (1) copy of packing list.7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of t he goods as well as different requirement for transportation, loading and unloading of the goods.7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.7.6 All Technical Documentation provided by the Seller shall be properly packed to withstand long distance transportation and multiple handling. The surface of each package shall be marked with the following words:(a) Destination(b) Consignee(c) Contract number(d) Gross/net weight (kg)(e) Item number(f) Dimensions: L x W x H (cm)Article 8 Technical Service and Technical Training8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.Article 9 Standards and Inspection9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipmentand issue the ex-work quality certificate.9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.Article 10 Design and Design Liaison10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visa s to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.11.2 Chief Representatives11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.11.3 Erection and Test Run11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.11.4 Commissioning and Performance Test11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s tech nical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.11.5 Acceptance11.5.1 Acceptance shall occur in respect of the Equipment when :。

商务局技术进口合同范本

商务局技术进口合同范本

商务局技术进口合同范本甲方(技术进口方):_____________________法定代表人:_____________________法定地址:_____________________联系方式:_____________________乙方(技术出口方):_____________________法定代表人:_____________________法定地址:_____________________联系方式:_____________________鉴于甲方希望从乙方引进_________技术,乙方愿意将其拥有的技术转让给甲方,双方经过友好协商,就技术进口事宜达成如下协议:第一条定义1. “技术资料”是指乙方提供的与该技术相关的设计、制造、安装、测试、验收、质量保证和维护等方面的资料,包括但不限于图纸、说明书、手册、软件、数据等。

2. “技术服务”是指乙方根据本合同的约定,向甲方提供的与该技术相关的技术指导、技术培训、技术咨询等服务。

3. “技术改进”是指在乙方的技术基础上,甲方对该技术进行的改进和创新。

4. “合同产品”是指甲方根据乙方的技术,利用乙方提供的技术资料和技术服务生产的产品。

5. “后续改进”是指在本合同有效期内,任何一方对本合同标的技术所作的改进和创新。

第二条技术资料的交付1. 乙方应在本合同生效后_____个工作日内,将技术资料交付给甲方。

2. 技术资料的交付方式为____________,交付地点为________________。

3. 甲方收到技术资料后,应及时进行检查和验收,如发现技术资料不符合本合同的约定,应在收到技术资料后_____个工作日内通知乙方。

乙方应在收到甲方的通知后_____个工作日内,免费向甲方更换或补充符合本合同约定的技术资料。

第三条技术服务的内容和方式1. 乙方应在本合同生效后_____个工作日内,派遣技术人员到甲方所在地,为甲方提供技术指导和培训。

技术服务进出口合同范本

技术服务进出口合同范本

技术服务进出口合同范本合同编号:__________技术服务进出口合同范本地址:__________联系人:__________联系电话:__________地址:__________联系人:__________联系电话:__________第一条技术的范围与内容1.1 本合同所涉及的技术包括但不限于__________(详细描述技术内容、特点、用途等)。

1.2 乙方应确保在合同有效期内,对该技术进行充分的研究、开发和推广。

第二条技术进出口2.1 甲方同意将技术授权给乙方使用,并确保乙方在合同约定的范围内合法使用该技术。

2.2 乙方应按照甲方的要求,办理相关技术进出口手续,包括但不限于申请许可证、办理海关手续等。

第三条技术转让与培训3.1 甲方应向乙方提供完整的技术资料、操作手册等,并负责对乙方人员进行技术培训。

3.2 乙方应在合同约定的期限内,掌握该技术,并保证技术转让的顺利进行。

第四条技术改进与升级4.1 乙方在使用过程中,如发现技术存在缺陷或需要改进,应立即通知甲方。

4.2 甲方应在接到乙方通知后,及时对技术进行改进或升级,并承担相关费用。

第五条技术成果的归属与分享5.1 乙方在使用过程中,如取得技术成果(包括但不限于专利、著作权等),应与甲方共享。

5.2 甲方应协助乙方在相关国家/地区申请和保护技术成果。

第六条保密条款6.1 双方应对在合同执行过程中获知的对方商业秘密和机密信息予以保密。

6.2 保密期限自合同签订之日起算,至合同终止或履行完毕之日止。

第七条合同的生效、变更与终止7.1 本合同自双方签字盖章之日起生效。

7.2 合同的变更或终止,应经双方协商一致,并签订书面协议。

第八条争议解决8.1 双方在履行合同过程中发生的争议,应通过友好协商解决。

8.2 如协商无果,任何一方均有权将争议提交至合同签订地人民法院解决。

第九条其他条款9.1 本合同未尽事宜,双方可签订补充协议,补充协议与本合同具有同等法律效力。

代理进口合同一6篇

代理进口合同一6篇

代理进口合同一6篇篇1甲方(委托人):____________________地址:____________________________________联系方式:____________________乙方(代理人):____________________地址:____________________________________联系方式:____________________鉴于甲方需要进口某些商品,乙方具备相关进口业务资质和能力,双方根据平等、自愿、互利的原则,经友好协商,达成以下代理进口合同:一、代理事项1. 乙方同意按照甲方的委托,为其代理进口以下商品:(商品清单附后)。

2. 乙方将负责办理进口手续,包括但不限于对外签约、付款、运输、保险、清关等。

二、代理期限本合同自双方签署之日起生效,至代理事项完成并顺利清关止。

三、双方责任与义务1. 甲方责任与义务(1)甲方应向乙方提供必要的进口许可证、资质证明及其他相关文件。

(2)甲方应确保委托进口的商品的品质和数量符合合同规定。

(3)甲方应按照约定支付进口货款、运费、保险费等费用。

(4)甲方应遵守国家相关法律法规,不得委托乙方进口国家禁止或限制的货物。

2. 乙方责任与义务(1)乙方应尽力协助甲方完成进口手续,确保进口货物的顺利清关。

(2)乙方应及时向甲方报告进口货物的进展情况。

(3)乙方应遵守国家相关法律法规,不得违法代理进口业务。

(4)乙方应对甲方的商业秘密进行保密。

四、费用与支付1. 甲方应按照约定支付乙方代理费及相关费用。

代理费金额及支付方式双方另行协商确定。

2. 甲方应在以下时间支付相关费用:(1)合同签订后,支付代理费;(2)货物到达港口前,支付货款;(3)货物清关后,支付其他费用。

3. 若甲方未按时支付相关费用,乙方有权暂停代理业务,由此产生的一切损失由甲方承担。

五、违约责任1. 若甲方违反本合同约定,导致乙方无法完成代理事项,乙方有权解除合同,并要求甲方承担违约责任。

进口三方协议范本(7篇)

进口三方协议范本(7篇)

进口三方协议范本甲方:地址:法定代表人:电话:乙方:(工厂)地址:法定代表人:电话:丙方:(外商)地址:授权代表:电话:鉴于:1、乙丙双方经友好协商,同意由乙方向丙方购买本协议及本协议所涉及合同项下的货物;且甲、乙、丙三方同意:1、如乙方未按照销售合同的规定将全部货款(分批交货、分批付款的,指每批货物的全部货款)付至甲方,甲方无义务按进口合同的规定向丙方支付任何货款,且免除任何有关延迟付款的违约责任,丙方无权依进口合同向甲方追索(究)任何货款(违约责任)。

2、甲方对有关货物的质量不承担任何责任。

如乙方对货物质量有任何异议,应自行与丙方协商处理,而无权依销售合同向甲方追究任何违约责任;如需退换货,乙方可委托甲方办理,手续费另计。

3、丙方保证交付所给甲方的货物在产地,规品、数量等方面与进口合同的规定严格一致;如有不符,丙方应承担所有法律责任并赔偿甲方因此而遭受的海关处罚。

4、如销售合同及进口合同的规定与本协议不符,以本协议的规定为准。

甲方:授权人签字:盖章:乙方:授权人签字:盖章:丙方:授权人签字:盖章:签订时间:签订地点:进口三方协议范本(二)甲方:_____地址:_____法定代表人:_____ 电话:_____ 乙方:_____(工厂)地址:_____法定代表人:_____ 电话:_____ 丙方:_____(外商)地址:_____授权代表:_____ 电话:_____ 鉴于:1、乙丙双方经友好协商,同意由乙方向丙方购买本协议及本协议所涉及此进口三方协议范本项下的货物;2、乙方委托甲方向丙方进口上述货物,但出于某些技术上的原因,甲、乙双方于____年____月____日就该批货物签订了____号《买卖合同》(以下称“销售合同”)而非代理进口合同;3、乙方授权甲方就上述货物以甲方名义(而非乙方名义)与丙方于____年____月____日签订了____号《进口合同》(以下称“进口合同”);4、甲乙丙三方均知悉并同意上述情况及做法:甲乙丙三方就上述销售合同及进口合同中的某些问题,经友好协商,达成一致,兹签订本协议书。

技术进口合同范本6篇

技术进口合同范本6篇

技术进口合同范本6篇篇1甲方(进口方):____________________乙方(出口方):____________________根据《中华人民共和国合同法》及相关的法律法规,甲乙双方在平等、自愿、公平和诚实信用的基础上,就甲方向乙方进口技术事宜,经过友好协商,达成如下协议:一、合同标的1. 技术名称:____________________2. 技术内容(包括技术特征、规格、性能等):____________________3. 技术使用范围:____________________二、合同金额及支付方式1. 本合同总金额为:______人民币。

2. 支付方式:(1)预付款:合同签订后,甲方支付乙方合同总金额的______%作为预付款。

(2)进度款:乙方按照合同约定完成技术研发并交付甲方验收合格后,甲方支付乙方剩余款项。

三、技术交付与验收1. 乙方应按照合同约定的时间、地点,将技术资料及相关的技术文件交付给甲方。

2. 甲方应在收到技术资料后的______个工作日内进行验收,并出具验收报告。

3. 如甲方对技术验收存在异议,应当在验收完成后的______个工作日内以书面形式提出,否则视为验收合格。

四、技术保障及售后服务1. 乙方应对所提供的技术负责,确保技术的成熟、稳定和可靠。

2. 在技术使用过程中,如遇到技术问题,乙方应及时提供技术支持和服务。

3. 乙方应在技术使用过程中,对甲方操作人员进行必要的技术培训。

1. 甲乙双方应对本合同内容、交易过程及相关的技术信息予以保密,未经对方同意,不得向第三方泄露。

2. 甲乙双方均应采取必要措施,确保技术的安全、保密。

如因一方原因造成技术泄露,应承担相应的法律责任。

六、违约责任1. 甲乙双方如一方未按照合同约定履行义务,应承担违约责任。

2. 如因乙方原因导致技术未能按时交付或交付的技术不符合合同约定,乙方应承担违约责任,并赔偿甲方因此造成的损失。

3. 如因甲方原因导致未按时支付款项,甲方应承担违约责任,并支付逾期付款利息。

技术进口合同通用范本6篇

技术进口合同通用范本6篇

技术进口合同通用范本6篇篇1技术进口合同通用范本合同编号:______________甲方(进口商):______________ 地址:______________乙方(出口商):______________ 地址:______________鉴于甲方希望从乙方处进口技术产品,现经双方友好协商一致,达成以下技术进口合同:第一条产品名称及规格1.1 乙方同意向甲方出口以下产品(简要描述产品名称及规格)。

1.2 产品价格为______________(币种),总价为______________(币种)。

1.3 产品出口国家:______________。

第二条交货时间及地点2.1 乙方应在签订合同后______________天内将产品送达至______________(交货地点)。

2.2 交货方式:______________。

第三条产品质量及包装3.1 产品应符合国际质量标准,且不得存在任何质量问题。

3.2 产品包装应符合运输安全规定,并能够有效保护产品。

第四条付款方式及时间4.1 甲方应按照以下方式支付产品货款:(1)首次付款:________%于合同签署之日起______________天内支付;(2)尾款支付:________%于产品交付后______________天内支付。

4.2 付款方式:______________。

第五条知识产权保护5.1 乙方保证其产品不侵犯任何第三方知识产权,并对因产品侵权而导致的一切法律责任承担全部责任。

5.2 甲方不得未经乙方授权将产品用于任何商业目的,否则应承担相应法律责任。

第六条违约责任6.1 若一方未能按照约定履行合同义务,应承担相应违约责任。

6.2 若因不可抗力等不可抗拒因素导致合同无法履行,一方应立即通知对方并尽力减少损失。

第七条争议解决7.1 因合同引起的任何争议,双方应友好协商解决;协商不成的,应提交仲裁机构解决。

第八条其他事项8.1 本合同自双方签署之日起生效,有效期为______________年。

进口协议范本8篇

进口协议范本8篇

进口协议范本8篇篇1甲方(进口方):___________________地址:_______________________________法定代表人:_______________________电话:_______________________________电子邮件:___________________________乙方(出口方):___________________地址:_______________________________法定代表人:_______________________电话:_______________________________电子邮件:___________________________鉴于甲方需要进口特定商品,乙方具备出口相关商品的资质和能力,双方本着平等互利、诚实信用的原则,经友好协商,就本次进口事宜达成如下协议:一、协议目的双方同意,由乙方向甲方出口本协议约定的商品,甲方按照约定支付货款,双方共同遵守本协议的所有条款。

二、商品描述及规格1. 商品名称:_______________________2. 型号/规格:_______________________3. 数量:_______________________4. 质量标准:按照国家质量标准或双方约定的标准执行。

5. 包装要求:符合出口标准,确保商品安全运输。

三、价格与支付方式1. 总价:_______________________(人民币或指定货币)。

2. 支付方式:电汇、信用证或其他双方约定的支付方式。

3. 付款期限:交货前支付一定比例预付款,余款在收到货物并验收合格后按约定支付。

四、交货与运输1. 交货期限:自合同签订之日起XX天内。

2. 交货地点:甲方指定地点。

3. 运输方式:海运、空运或双方约定的其他运输方式。

4. 运输费用:由谁承担运输费用,需明确约定。

五、关税与税费1. 进出口关税:按照各国法律法规执行。

进口合同通用样本(6篇)

进口合同通用样本(6篇)

进口合同通用样本买方:_____地址:_____电话:_____法定代表人:_____职务:_____国籍:_____卖方:_____地址:_____电话:_____法定代表人:_____职务:_____国籍:_____买卖双方在平等、互利原则上,经充分协商一致,由买方购进,卖方出售下列货物,并按下列条款履行:第一条货物名称、规格、生产国别、制造工厂、包装及唛头。

每件货物上用不褪色的涂料标明货号、毛重、净重、编号、尺码、目的口岸,并标明唛头。

第二条数量、单价、总值_____第三条装运期限每月交货数量必须一次交清,不得分批装运。

第四条装运口岸_____第五条目的口岸_____第六条付款条件买方在收到卖方关于预计装船日期及准备装船的数量的通知后,应于装运前_____天通过_____银行开立以卖方为受益人的不可撤消的信用证。

该信用证凭即期汇款票及本合同规定的单据在开证行付款。

第七条单据各项单据均须使用与本合同相一致的文字,以便买方审核查对:a.填写通知目的口岸对外贸易运输公司的空白抬头、空白背书的全套已装船的清洁提单(如本合同为fob价格条件时,提单应注明“运费到付”或“运费按租船合同办理”字样;如本合同为cfr价格条件时,提单应注明“运费已付”字样)。

b.发票:注明合同号、唛头、载货船名及信用证号;如果分批装运,须注明分批号。

c.装箱单及/或重量单:注明合同号及唛头,并逐件列明毛重、净重和货号。

d.制造工厂的品质及数量/重量证明书。

品质证明书内应列入根据合同规定的标准按货号进行化学成分、机械性能及其他各种试验的实际试验结果。

数量/重量证明书应按货号列明重量。

e.按本合同规定的装运通知电报抄本。

f.按本合同规定的航行证明书(如本合同为cfr价格条件时,需要此项证明书;如本合同为fob价格条件时,则不需此项证明书)。

第八条装运条件a.离岸价条款:(a)装运本合同货物的船只,由买方或卖方运输代理人_____租船公司租订舱位。

技术进出口合同范本6篇

技术进出口合同范本6篇

技术进出口合同范本6篇篇1合同编号:____________甲方(买方):________________地址:________________________法定代表人:__________________电话:________________________乙方(卖方):________________地址:________________________法定代表人:__________________电话:________________________鉴于甲方需要进口技术设备,乙方拥有相关技术并同意出售,双方根据平等互利的原则,经过友好协商,达成如下协议:一、货物名称及规格1. 货物名称:(请填写具体的货物名称)。

2. 规格型号:(请填写货物的规格型号)。

具体的技术参数和数据以附件形式附在合同中。

二、数量及单价1. 数量:(请填写具体的数量)。

篇2甲方(买方):__________地址:__________电话:__________法定代表人(或授权代表):__________国籍:__________注册编号/注册号:__________签订日期:__________乙方(卖方):__________地址:__________电话:__________法定代表人(或授权代表):__________国籍:__________注册编号/注册号:__________签订日期:__________鉴于甲方希望从乙方进口特定技术,双方本着平等互利、诚实信用的原则,经友好协商,达成如下技术进出口合同:一、合同对象与目的本合同涉及的技术名称为:____________,其应用于____________领域。

双方同意在乙方拥有完全合法权利及技术的支持下,进行技术进出口交易。

合同的主要目的是确保双方权益,明确双方责任,保证技术进出口的顺利进行。

二、技术内容与技术标准本合同所述技术包括但不限于以下内容:____________。

技术进出口合同范本9篇

技术进出口合同范本9篇

技术进出口合同范本9篇第1篇示例:技术进出口合同范本是指在技术领域中进行跨国交易时签订的合同,其中包括了双方约定的技术产品或服务的进口和出口条款,以及双方各自的权利和义务。

下面是一份简单的技术进出口合同范本,仅供参考。

技术进出口合同范本甲方:(出口方/进口方名称)地址:(甲方地址)法定代表人:(法定代表人姓名)电话:(甲方联系电话)传真:(甲方传真号码)邮箱:(甲方邮箱)鉴于甲方具有(技术产品/服务的名称)的生产能力和经验,愿意将该技术产品/服务出口至乙方所在国家(地区);而乙方需求该技术产品/服务,并具备相应的进口能力,双方达成如下协议:第一条产品说明甲方同意向乙方出口(技术产品/服务的名称),乙方同意进口该技术产品/服务并支付相应的进口费用。

具体产品规格和数量见附件一。

第二条价格与付款方式1. 产品价格为(价格),支付方式为(支付方式)。

2. 付款方式:(详细说明)。

第三条交货时间与地点1. 甲方应在合同签订后(时间)内将产品送至乙方指定地点。

2. 交货地点为:(交货地点)。

第四条质量标准与检验1. 甲方保证所提供的产品符合乙方的质量标准,并承担相应的质量责任。

2. 乙方有权派员对产品进行检验,甲方应积极配合并提供必要的协助。

第五条运输与保险1. 运输费用由(甲/乙)方承担。

2. 保险费用由(甲/乙)方承担。

第六条知识产权保护1. 双方应保护对方的知识产权,未经允许不得擅自复制、传播或商业化利用。

2. 如因侵犯知识产权引发的争议,应由侵权方承担相应的法律责任。

第七条违约责任1. 若一方未能履行合同规定的义务,应承担相应的违约责任。

2. 违约方应向守约方支付违约金,违约金金额为合同总金额的(违约金比例)。

第八条法律适用与争议解决1. 本合同适用(法律名称),任何因合同引发的争议应提交(仲裁/法院)解决。

2. 若一方需要变更合同内容,需经双方协商一致后签订书面协议。

第九条其他事项1. 本合同自(日期)起生效,有效期为(有效期)。

技术进口合同协议书范本最新通用

技术进口合同协议书范本最新通用

技术进口合同协议书范本最新通用合同编号:__________技术进口合同协议书范本最新通用合同双方:鉴于甲方愿意引进乙方的先进技术,甲乙双方本着平等互利的原则,经友好协商,达成如下协议:一、技术内容1.1 乙方授权甲方使用其拥有的(技术名称)技术,该技术详细内容见附件一。

1.2 甲方应按照乙方的技术要求,进行生产、使用和推广。

二、技术使用范围2.1 甲方可以在(使用范围)范围内使用乙方授权的技术。

2.2 未经乙方书面同意,甲方不得将乙方授权的技术转让、出租、许可给第三方使用。

三、技术支持与服务3.1 乙方应向甲方提供技术培训,确保甲方能够正确、熟练地使用该技术。

3.2 乙方应提供必要的技术支持,解决甲方在使用过程中遇到的技术问题。

3.3 乙方应在合同有效期内,根据甲方需求,对技术进行升级和改进。

四、技术费用4.1 甲方应支付给乙方技术使用费,共计人民币(大写)(金额),小写(金额)。

4.2 甲方应按照乙方规定的付款方式和时间,支付技术使用费。

五、合同期限5.1 本合同自双方签字之日起生效,有效期为(期限)年。

5.2 合同期满后,如双方同意继续合作,可签订续约合同。

六、违约责任6.1 任何一方违反本合同的约定,导致合同无法履行,应承担违约责任,向对方支付违约金,违约金为本合同技术使用费的(百分比)。

6.2 因不可抗力导致合同无法履行或部分履行,双方互不承担责任。

七、争议解决7.1 本合同的签订、履行、解释及争议解决均适用中华人民共和国法律。

7.2 双方在履行合同过程中发生的争议,应通过友好协商解决;协商不成的,可以向有管辖权的人民法院提起诉讼。

八、其他约定8.1 本合同一式两份,甲乙双方各执一份。

8.2 本合同未尽事宜,可由双方另行签订补充协议,补充协议与本合同具有同等法律效力。

甲方(盖章):__________乙方(盖章):__________甲方代表(签名):__________乙方代表(签名):__________签订日期:__________附件一:技术详细内容(此处填写技术详细内容)附件二:技术培训方案(此处填写技术培训方案)附件三:技术升级和改进计划(此处填写技术升级和改进计划)多方为主导时的,附件条款及说明一、当甲方为主导时,增加的多项条款及说明1.1 甲方独家授权条款甲方独家授权乙方在(独家授权范围)内使用甲方拥有的(技术名称)技术,未经甲方书面同意,乙方不得将该技术转让、许可给任何第三方使用。

技术进出口合同范本(完整版)

技术进出口合同范本(完整版)

合同编号:YT-FS-3309-58技术进出口合同范本(完整版)Clarify Each Clause Under The Cooperation Framework, And Formulate It According To The Agreement Reached By The Parties Through Consensus, Which Is Legally Binding On The Parties.互惠互利共同繁荣Mutual Benefit And Common Prosperity技术进出口合同范本(完整版)备注:该合同书文本主要阐明合作框架下每个条款,并根据当事人一致协商达成协议,同时也明确各方的权利和义务,对当事人具有法律约束力而制定。

文档可根据实际情况进行修改和使用。

技术进出口合同范本根据《中华人民共和国技术进出口管理条例》,现公布修订后的《技术进出口合同登记管理办法》,自公布之日起30日后施行,技术进出口合同登记管理办法》(原对外贸易经济合作部XX年第17号令)同时废止。

部长 xxx二〇xx年x月x日技术进出口合同登记管理办法第一条为规范自由进出***术的管理,建立技术进出口信息管理制度,促进我国技术进出口的发展,根据《中华人民共和国技术进出口管理条例》,特制定本办法。

第二条技术进出口合同包括专利权转让合同、专利申请权转让合同、专利实施许可合同、技术秘密许可合同、技术服务合同和含有技术进出口的其他合同。

第三条商务主管部门是技术进出口合同的登记管理部门。

自由进出xx技术合同自依法成立时生效。

第四条商务部负责对《政府核准的投资项目目录》和政府投资项目中由国务院或国务院投资主管部门核准或审批的项目项下的技术进口合同进行登记管理。

第五条各省、自治区、直辖市和计划单列市商务主管部门负责对本办法第四条以外的自由进出xx 技术合同进行登记管理。

中央管理企业的自由进出xx 技术合同,按属地原则到各省、自治区、直辖市和计划单列市商务主管部门办理登记。

进口三方协议范本6篇

进口三方协议范本6篇

进口三方协议范本6篇篇1协议编号:[编号]甲方(进口方):[公司名称]地址:[地址]法定代表人:[姓名]乙方(出口方):[公司名称]地址:[地址]法定代表人:[姓名]丙方(平台/中介方):[公司名称]地址:[地址]法定代表人:[姓名]鉴于甲方有意从乙方进口特定商品,双方基于平等互利的原则,经丙方作为中介或平台协助沟通,就有关进口事宜达成如下协议:一、协议背景及目的本协议旨在明确三方在进口交易过程中的权利与义务,确保交易的顺利进行。

三方确认已经充分了解协议内容并同意按照本协议的规定执行。

二、商品描述及规格详细列明进口商品的名称、型号、规格、数量、质量、包装等要求。

(具体商品描述表附后)三、交易条件1. 交易价格:明确商品的单价、总价及货币单位。

2. 付款方式:包括但不限于电汇、信用证等。

3. 付款期限:约定预付款、发货款及尾款的支付时间和比例。

4. 运输方式:海运、空运或其他方式。

5. 交货期限和地点:明确货物的交货时间和地点。

6. 验收标准:约定货物的质量标准及验收方法。

7. 售后服务:乙方的售后服务承诺及标准。

四、丙方的责任和义务1. 丙方负责协调甲乙双方的沟通,确保交易顺利进行。

2. 丙方应提供交易平台,确保平台的安全性和稳定性。

3. 丙方有义务对甲乙双方的交易过程进行监管,确保交易合法合规。

4. 其他相关责任和义务。

五、违约责任及解决方式1. 任何一方未能履行本协议规定的义务,均应承担违约责任。

2. 违约的救济措施包括但不限于索赔、解除协议等。

3. 如发生争议,应首先通过友好协商解决;协商不成的,任何一方均有权向有管辖权的人民法院提起诉讼。

六、保密条款1. 三方应对本协议的内容及在合作过程中获知的对方商业秘密进行保密。

2. 未经对方许可,不得向第三方泄露相关信息。

七、其他条款1. 本协议自三方签字(盖章)之日起生效。

2. 本协议一式三份,甲、乙、丙三方各执一份,具有同等法律效力。

3. 本协议未尽事宜,可由三方另行协商补充。

进口协议范本8篇

进口协议范本8篇

进口协议范本8篇篇1甲方(进口方):_________________________地址:___________________________________法定代表人:___________________________电话/传真:_____________________________电子邮箱:_____________________________乙方(出口方):_________________________地址:___________________________________法定代表人:___________________________电话/传真:_____________________________电子邮箱:_____________________________鉴于甲、乙双方经友好协商,就甲方向乙方进口以下商品(以下简称“货物”)达成如下协议:第一条货物描述1. 货物名称:___________________________2. 型号/规格:_________________________3. 数量:_____________________________4. 质量标准:符合国家相关标准及乙方企业标准。

5. 包装要求:符合甲方要求,并适应长途运输。

6. 价格条款:双方约定以________(货币)计价,总金额为________(大写)。

具体价格、数量、交货期等详见附件。

第二条付款方式1. 预付款:合同签订后,甲方支付乙方总货款______%作为预付款。

2. 发货款:甲方收到乙方发货通知及相应发票后,支付剩余货款。

3. 付款方式的具体细节和比例按照附件中的条款执行。

第三条交货与验收1. 交货期限:乙方应在合同生效后______天内交货。

2. 交货地点:甲方指定的___________地点。

3. 运输方式:___________________________。

外贸进口合同范本8篇

外贸进口合同范本8篇

外贸进口合同范本8篇篇1合同编号:XXXXXX甲方(买方):__________________地址:__________________电话:__________________传真:__________________法定代表人:__________________乙方(卖方):__________________地址:__________________电话:__________________传真:__________________法定代表人:__________________鉴于甲、乙双方本着友好合作的精神,经充分协商,就甲方向乙方进口以下商品达成如下协议,以资共同信守履行。

第一条进口商品名称及规格甲方购买乙方的商品名称、类型、规格、数量和金额详见本合同附件一《进口商品清单》。

在合同有效期内,甲方有权根据实际需要增加或减少采购数量,但应及时通知乙方并协商调整相关条款。

第二条价格与支付方式一、甲方应按照附件一《进口商品清单》中列明的单价购买乙方商品。

乙方应确保所提供商品的价格具有市场竞争力。

二、支付方式:甲方应按照下列方式支付款项:1. 合同签署后,甲方向乙方支付定金XX%(合同总价);2. 货到甲方指定港口后,经过验收合格,甲方支付剩余款项XX%(合同总价)。

三、支付货币:本合同的支付货币为XX币。

四、支付银行及账户信息详见附件二《支付账户信息》。

五、乙方需提供有效的发票及相关单据,以便甲方进行账务处理。

第三条装运与交货一、交货时间:乙方应在合同签署后的XX天内完成发货。

二、交货地点:甲方指定的港口。

三、运输方式:海运。

乙方负责安排货物的运输,并承担运费。

四、乙方应在发货后XX小时内向甲方提供发货通知及必要的运输信息。

五、货物到达甲方指定港口后,甲方应在收到通知后的XX天内完成验收。

验收合格后,甲方应签署验收合格证明并通知乙方。

六、如因运输过程中产生的问题导致货物损失或损坏,应由乙方负责解决并承担相应损失。

技术进出口服务合同范本

技术进出口服务合同范本

技术进出口服务合同范本甲方(服务提供方):________乙方(服务接受方):________鉴于甲方是一家专业从事技术进出口服务的公司,乙方需要甲方提供技术进出口服务,经双方协商一致,特订立本合同。

### 第一条服务内容1. 甲方应按照乙方的要求,提供技术进出口服务,包括但不限于技术资料的翻译、技术文件的审核、技术设备的进出口手续办理等。

2. 甲方应保证所提供的服务符合国家相关法律法规及行业标准。

### 第二条服务期限1. 本合同服务期限自________年____月____日起至________年____月____日止。

2. 如乙方需要延长服务期限,应在合同到期前____日内向甲方提出书面申请,经甲方同意后,双方可签订补充协议。

### 第三条服务费用及支付方式1. 服务费用总计为人民币(大写):________元整(¥________)。

2. 支付方式:乙方应在合同签订后____日内支付服务费用的____%作为预付款,余款在服务完成后____日内一次性支付。

### 第四条甲方的权利与义务1. 甲方有权按照合同约定收取服务费用。

2. 甲方应按照约定的时间和质量完成服务工作。

3. 甲方应对乙方的技术资料保密,未经乙方书面同意,不得向第三方泄露。

### 第五条乙方的权利与义务1. 乙方有权要求甲方按照合同约定提供服务。

2. 乙方应按时支付服务费用。

3. 乙方应向甲方提供真实、准确的技术资料和信息。

### 第六条违约责任1. 如甲方未按约定提供服务,应向乙方支付违约金,违约金为服务费用的____%。

2. 如乙方未按时支付服务费用,应向甲方支付违约金,违约金为未支付服务费用的____%。

### 第七条争议解决双方因履行本合同所发生的任何争议,应首先通过友好协商解决;协商不成时,任何一方可向甲方所在地人民法院提起诉讼。

### 第八条其他1. 本合同的修改、补充须经双方协商一致,并以书面形式确认。

2. 本合同一式两份,甲乙双方各执一份,具有同等法律效力。

技术进口合同

技术进口合同

技术进口合同概述随着国际化进程不断加快,越来越多的公司开始寻求跨国合作,将国外的先进技术引入国内。

技术进口合同是一种重要的跨国合作方式,它是指一份合同,其中一个国家(进口国)购买来自另一个国家(出口国)的技术知识、专利、管理经验等,以提高自己的科技水平和生产能力。

技术进口合同通常包括技术使用和转让、技术进口和购买、技术保密和保险等方面内容。

合同的签订需要遵循相应的法律法规,避免合同纠纷和不必要的损失。

合同要素成本和支付方式技术进口合同的成本通常包括技术价格、技术保密费、资金及设备费等,这些费用应在合同中明确说明。

支付方式有现金支付、信用证支付、授信支付等多种形式。

技术使用和转让技术使用和转让是技术进口合同的核心问题,需要在合同中明确规定。

一般而言,技术使用和转让应包括授权使用的范围、期限及使用费用等方面的规定。

保密和保险技术进口涉及到高度敏感的商业机密,因此保密有极高的重要性。

合同中应对技术保密进行具体规定,包括保密范围、保密期限、保密责任和保密违约赔偿等。

同时,在技术进口中也需要考虑保险的问题,以应对潜在的风险和损失。

合同范本以下是技术进口合同的范本,仅供参考:技术进口合同本合同由以下双方于(填写日期)日签订:甲方:(填写公司名字)地址:(填写公司地址)法定代表人:(填写公司法人代表名字)电话:(填写公司联系电话)乙方:(填写公司名字)地址:(填写公司地址)法定代表人:(填写公司法人代表名字)电话:(填写公司联系电话)协议正文一、技术进口范围(填写技术名称、数量、品牌、型号等)二、技术价格(填写技术价格、计价方式、支付期限等)三、技术保密(对技术的保密范围、保密期限、保密责任等进行规定)四、技术保险(对技术的保险方式、保险期限等进行规定)五、技术使用和转让(对技术的授权使用范围、期限和费用进行规定)六、合同期限(填写合同期限)七、争议解决与法律适用(对合同争议解决方式和法律适用进行规定)八、其他事宜(对其它关键内容和规定进行说明)签署甲方:(签字)乙方:(签字)签署注意事项在签署技术进口合同之前,双方需要进行充分的沟通和准备,确保合同内容清晰明确,并遵守相应的法律法规。

  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

技术进口合同范本
技术进口合同范本
卖方承诺将由所有卖方成员在本合同项下与买方的任何及全部联络并签署执行本与合同和合同履行有关的任何及全部书面文件,卖方各成员向买方承担连带责任。

因此,基于上述前提和相互的承诺及合意,双方协议如下并将依法遵守:
第1条合同范围
1.1 买方同意从卖方购买、卖方同意向买方出售合同工厂
____________,包括合同设备、专利和/或专有技术的使用许可、工程设计、技术资料、技术服务及技术培训。

1.2 卖方应提供附件1中所列的合同设备。

合同设备的技术规格、性能和保证指标详见附件
3.
1.3 卖方同意授予买方为在中华人民共和国境内生产和销售合同产品并将合同产品出口到双方授权代表签字;
本合同获得中国主管当局批准;
买方收到履约保函;
买方发出履约资金备妥通知。

2
1.3 本合同用___文书就,一式___份,双方当事人各执____份。

2
1.4 本合同的附件为本合同不可分割的组成部分,并具有与合同正文同样的法律效力。

如果附件的内容与合同正文规定不一致,合同正文的效力优先。

2
1.5 对本合同条款的任何补充、增添或修改应以书面形式进行并由双方授权代表签字。

买方:
地址:
邮编:
传真:
____________________________________
电话:
____________________________________
电子邮件:
联系人:
____________________________________
卖方:
地址:
____________________________________
邮编:
____________________________________
传真:
____________________________________
电话:
____________________________________
电子邮件:
____________________________________
联系人:
____________________________________
附送:
技术部关于2015年半年工作总结
技术部关于2015年半年工作总结
技术部关于2015年半年工作总结
2015年刚刚过去的这一个半年,是我正式履职《x周刊》技术部主任的半年。

这期间,周刊实施了新的组织架构调整和内容调整,送走不少老同事,也迎来许多新同事。

尽管工作中难免伴随着不足和缺憾,但总体而言,我感觉技术部的工作相对以往还是有许多明显的进步和提升。

进步和值得称道之处
首先,我们技术部5位同事,黄x、张x、鲁x、赵x,以及新加入的李x,在工作热情、积极性和主动性上的表现还是应该值得称道,除了极个别的情况,他们每周、每日都在兢兢业业、勤勤恳恳地为周刊的发展和进步,做出自己的努力。

这一点至关重要,因为态度决定一切,我认为,我们技术部在总体战斗力、凝聚力和积极向上的态度上,比过去有了很大的进步。

尽管我们这个部门多数人还比较年轻,但他们已经具备了足够的责任感和上进心,也在努力提高着自己的专
业素养和综合能力。

今后,我将努力做好大家的服务员和领路人,使
我们这个队伍更具活力和干劲!
其次,在技术部内容的新闻性、深刻性、继承性和呈现效果上,
我认为我们技术部比以往取得了明显的进步。

在继承了以往周刊内容
定位和新闻原则的基础上,技术部今年开始展开了围绕客户需求做深
内容的尝试。

例如在承载领域,我们配合中兴、烽火、上海贝尔等大客户需
求,进行选题的深度包装和定制采访,无论在收益拉动还是内容呈现
上都取得了良好的发展;无线领域,也开始了芯片、终端等系列创新选题的尝试;IT支撑领域,也在步步深化,紧扣客户需求展开策划和撰文;绿色、安全、测试、线缆领域,我们也紧紧围绕客户需求,做好支撑
和服务,同时加深内容的质量;而最近我们新加入的同事李璐,也在我们周刊全体带动和指引下,展开视频通信、统一通信选题的策划和执行,目前看呈现效果和内容质量也值得称道。

第三,我们技术部目前形成了一个良好的团队氛围和凝聚力,大
家彼此间可以畅所欲言,彼此信任,互帮互助。

无论是新同事,还是
老同事,无论谁遇到问题、困难和困惑,我们都可以做到随时准备提
供帮助。

半年以来,这方面例子很多,比如某同事出差,需要其他同
事顶上去接替其工作,我们从没有出现过因为埋怨、牢骚或扯皮而造
成不愉快或者工作质量打折;再比如,面对新同事的工作指导或客户资源介绍等需求,我们所有同事也是尽心尽力,倾其全部施以援手。

最后,我感觉我们技术部记者的专业能力、媒体素养和综合水平
半年来也有了显著的提升。

按照我们起初设定的计划,让每个记者成为专家型记者,我认为大家都在努力向这个目标靠近,而且越来越
近。

有比较才有鉴别,尽管与人民邮电报、通信产业报等各领域跟口十多年的记者相比,我们的许多记者还稍显青涩,但是后生可畏,他们目前都表现出了极强的上进心和学习热忱;同时,与多数媒体记者相比,我们的记者在专业性和新闻性上也具有相当的竞争力,这从记者的新闻发布会、专访和客户服务表现上可以得到反馈。

但是,学海无涯,整个产业和媒体行业都处于快速发展变化中,我们记者需要敏锐的洞察力和持久的学习,才能永远跟上甚至领先于整个社会的发展形势。

不足和尚待完善之处
人无完人,部门也如此。

我们在取得进步和发展的同时,也表现出不少问题。

这一点值得我们警惕,同时要树立好改过自新的决心和信心,踏踏实实地做好以下几个方面的补偿和革新工作。

首先,最大的问题在每周的流程上。

与新闻部相比,我们每周四做版时总是显得滞后许多,这样给做封面的同事、部门主任、美编、总编等一系列人员造成了极大的困扰每周四都要熬夜到周五凌晨时分甚至清晨才能回家休息。

身体是革命本钱,这种方式从长远看难以为继,也很难保证质量;同时,如果一味这样拖沓,也很容易滋生出部门以及个人的懒惰心理,得过且过,并且造成极坏的影响和传染。

因此,下一步我们将深刻认识到这个问题的严重性。

从部门的要求,从个人的思想意识上,要求和引导每位同事,保证好每周的流程。

其次,在部门及个人的学习上,我们缺乏必要的组织标准和机制创新,从而很难从长效上对每个人形成专业能力和媒体素养带动。

从整个公司层面,很难深入到如此具体的部门专业和部门学习上,下一步,我认为我们技术部有必要组织内部的学习和交流机制,在现有体
系的基础上,做好产业层面、媒体层面、综合层面的学习、交流和沟通,让大家学有所思、寓教于乐,并且形成较高的自信心和较强的凝聚力。

当然,问题还有许多。

行胜于言,我们将在今后的具体工作中,从个人立场跳出来,站在部门立场、周刊立场、公司立场和客户立场上,想问题,办事情。

从我做起,兢慎进取。

相关文档
最新文档