曲折缝缝纫机零件手册
JUKI 高速单针平缝曲折缝缝纫机LZ-2280N 说明书
LZ-2280NLZ-2281N LZ-2282N LZ-2282N-7LZ-2284N LZ-2284N-7LZ-2288N LZ-2285N 高速单针平缝曲折缝缝纫机(2点曲折缝）（宽幅2点曲折缝)(带下切刀2点曲折缝）（带下切刀2点曲折缝・带自动切线）（带2点・4点花样切换功能）（带2点・4点花样切换功能・带自动切线）（凸轮更换式）（拼缝）LZ-2280NU LZ-2284NU LZ-2284NU-7(防止布料错位规格、2点曲折缝）(防止布料错位规格、带2点・4点花样切换功能）(防止布料错位、带2点・4点花样切换功能・带自动切线）采用了旋梭的旋转轴在针摆中心移动的梭轴配合补偿机构。
梭勾在左右摆动时也能确实地钩住机线，比起以前的旧机型能更有效的防止在右摆动时的跳线以及断线，实现了高品质的缝制。
由于采用了颇受好评的旋梭以及挑线杆，因此即使是在极低的张力下也能实现高品质且稳定的缝迹。
此外还能防止在高速运转下的跳针以及断线，并大幅度的提高了线的对应能力。
可对应化纤线，斯潘线，面线等各种各样的线。
内梭采用了钛制，可抑制旋梭的发热。
由于降低了供油量，只留存少量的机油，因此可防止油污的产生，提高了耐用性。
此外，旋梭的形状采用的是可防止断针的形状。
通过低振动、低噪音的头部机座设计，即使是在高速运转下也能实现静音。
同时还设置了使机油难以留存的机臂，以及强制环流机构，可万无一失的防止漏油。
卷底线装置被安装在了便于操作的头部上面针摆幅的调整采用的是操作简便的扳手式。
此外还装备了能简便设定布料边缝制位置的基线变更扳手，无需移动导向以及卷边器，就能对摆针位置进行细微调整。
还装备了能调整微小缝距的送布调整拨盘以及固定缝用的加固装置。
扩大了送布牙的高度以及倾斜度的调整范围。
送布牙可在向上，水平以及向下的范围内进行调整，以求适应高低段部位的缝制。
压脚能轻轻地放在伸缩性强的布料上面，这样可减轻布料起皱以及对布料的损伤。
LZ-2280N系列调整摆针幅度扳手LZ-2280NLZ-2280N即使是高速运转它也能在低张力下实现稳定且柔软的缝制。
缝纫机说明书
二、FA2-1型缝纫机的特点该缝纫机分为五斗式枱板缝纫机及一头藏式枱板缝纫机（见图2、3、4）。
全台缝纫机习惯分为机头、枱板、机架三大部件。
该型缝纫机系集中集中家用缝纫机之优点及老小四四特点而制造的。
其具有以下特点：（1）装有正车器（倒轮闸），无论怎样踏动机器，上轮只能正转，不能倒转，如果踏错了，上轮要倒转时，正车器马上把机器停住，避免了断线、夹线、断针等现象（图1）。
安装时使正车器胶皮对正下带轮的皮带槽，然后将内外螺母锁紧（先别锁死），调整丝杆倾斜角度，至下带轮不能倒转时将内外螺母锁死（垫圈加在边角外面螺母的下方，避免漆皮划坏）。
（2）带抗压子（靠脚）而且还能将机头卧入斗内（能箱下）,即能装在各种藏式枱板上，除操作方便外，并能防止磕碰、防尘、便于保管。
（3）能吃厚，缝厚保24层，可达32层白市布，并可缝棉活、鞋帮、呢绒、布、绸缎、能卷边、绣花。
不但适用于三北（东北、西北、华北）寒冷地区缝制厚棉活，而且还能缝制薄活，不断线，不跳线，针迹均匀整齐。
（4）为使送活力大，保证吃厚，将一般家用缝纫机的滑块送布机构、小送布牙、小压脚，改为连杆送布机构、双牙子、大压脚，使送布机构使用耐久，力量大，以缝制厚活之用。
（5）一般家用缝纫机下带轮小，缝纫速度慢，而改性缝纫机，下带轮加大，运转速度快，以适应服装行业之需要。
（6）短针杆加上套筒（闷挺）使用耐久：（7）长针杆无上套筒的缝纫机，针杆直接与车壳摩擦，缝纫机的使用寿命降低，为克服此缺点，该型缝纫机采用了短针杆加上套筒，针杆直接与上套筒摩擦，磨损后可调换上套筒，延长车壳的使用寿命，保证缝纫机经久耐用。
（8）采用活梭床便于清理和装卸：（9）使梭床内经常清洁，运转灵活，保证良好的缝纫性能，就要经常擦拭梭床内部，装卸摆梭，死梭床尤为不便；而活梭床只要搬动压圈扳手，就可将摆梭取出，擦拭内部，节省时间便于维护。
（10）可以倒顺走针，以便往返重复缝纫。
（11）装有自动绕线器，绕线灵活、耐用。
杰克缝纫机 零件手册 说明书
服务号订阅号Service number Subscription number关于杰克杰克缝纫机股份有限公司创建于1995年，是一家专注于工业缝纫机、自动裁床、电机、服装智能生产管理系统的研发、生产和销售的全球化企业，拥有7000多名员工、1000多项有效专利，在上海证券交易所主板上市，股票代码603337。
经过二十多年的经营和发展，公司已成为全球缝制设备行业中产销规模最大的企业，是一家率先集缝前、缝中及软件为一体的服装智能制造成套解决方案服务商。
产品销往全球130多个国家，服务于服装、鞋业、箱包、家具、皮革、汽车、航空等多个领域。
近年来，公司保持稳健经营，连续9年行业销量遥遥领先。
公司先后收购了德国奔马、意大利迈卡、意大利威比玛、安徽旭豪公司，通过国内外并购，不断吸收消化国内外先进技术，形成了德国、意大利、北京、杭州、西安、武汉、台州、池州多地协同联动的全球化研发平台，持续推动公司高质量发展。
从中国制造到中国创造，杰克在国际缝制设备行业中脱颖而出，让天下没有难做的服装，让“中国制造”引领世界潮流。
Jack sewing machine Co., Ltd, founded in 1995, is a global enterprise who specialized in R&D, Production and Sales of industrial sewing machines, automatic cutting machines, energy saving motor and garment intelligent production management, with more than 7,000 employees and more than 1000 effective patents, which are listed on the Shanghai stock exchange board (stock code 603337).After more than 20 years of operation & development, Jack has become the largest enterprise in terms of production and marketing scale in the global sewing equipment industry. Jack is integrated of pre-sewing, sewing and software, leading in garments intelligent manufacturing total solution service provider. Products are sold to more than 130 countries and serve in the fields of garments, footwear, luggage, furniture, leather, automobile and aviation. Recent years, Jack has maintained steady operation, leading in industry global sales consecutive for 9 years.Jack has acquired German BULLMER, Italy MAIKA, Italy WI.BE.MAC, Anhui XUHAO company, rapid absorption of the overseas & domestic advanced technologies, which has formed the globalized R&D platform in Germany, Italy, Beijing, Hangzhou, Xi'an, Wuhan, T aizhou and Chizhou, continuously promoted Jack to high quality development.From "made in China" to "create in China", jack standing out in the international sewing equipment industry, to make it no difficulty to do garments manufacturing, let the "intelligent manufacturing in China" leading the world trend. About jack杰克荣誉中国轻工业缝制机械行业十强企业行业排名1国家知识产权优势企业全国售后服务十佳单位浙江制造认证证书浙江省质量奖亚洲设计大奖中国轻工业百强企业Zhejiang Quality Award Competitive Enterprises of National Intellectual Property Zhejiang Manufacturing Certificate Asian Design Award Top 100 China Light IndustryJack honor杰克质检Jack quality inspectionTop 10 of China After-sale Service Rank No.1 in Top 10 of ChinaLight Industry in Sewing Machinery质量把控，层层筛选，客户满意是检验我们的唯一标准！Quality control, layers screening, customer satisfaction is our only standard of inspection.目录Directory零件类 ▏旋梭 ▏ -------------------------------------------------------------机针 ▏ ------------------------------------------------------------上刀/下刀 ▏ -------------------------------------------双刀/圆刀 ▏ ------------------------------------------针板 ▏ ---------------------------------------------------------牙齿 ▏ -----------------------------------------------------------压脚 ▏ ---------------------------------------------------------弯针 ▏ -------------------------------------------------------------针夹头 ▏ ------------------------------------------------------辅件类 ▏机油 ▏ ---------------------------------------------------------纱剪 ▏ ---------------------------------------------------------服装剪 ▏ ------------------------------------------------------皮尺/卷尺 ▏ ------------------------------------------------------强力剪/镊子 ▏ ---------------------------------------下单系统 ▏零件服务 ▏ ------------------------------------------------梭壳/梭芯 ▏ ----------------------------------------------零件类Spare Parts02040608101216202628Bobbin Case / Bobbin Hook Needle Upper Knife/Lower Knife Double-Knife/Circular Knife Needle Plate Feed Dog Presser Foot Looper Hardness Scissor/ Tweezer AccessoriesMachine Oil Yarn Scissor Fabric Scissor Tapeline Spare Parts Service Ordering System313234353638小身材 大能量杰克原厂零件，让您的机器始终保持出色状态Needle Clamp Spare Parts Small body, big power Jack original parts, Keep your machine always in excellent condition名 称：梭壳（东和）代 码：11218504/Part NO 适 配：电脑平缝系列电脑平缝梭壳普通/直驱平缝梭壳名 称：梭壳代 码：10118021/Part NO 适 配：普通/直驱平缝系列Impact resistance, no deformationSmooth round hole, smooth threadingUniversal Bobbin耐冲击，不变形圆孔光滑，过线流畅通用型梭芯梭芯梭壳BobbinBobbin Case For Computerized Lockstitch Machine Ordinary Bobbin Case Original quality, quality assurance Precise processing, smooth threading 原厂品质，质量保障 精准加工，过线顺畅Bobbin Case高强度合金材料耐冲击、不变形使用周期长精湛工艺，对称精致圆孔设计结构轻巧过线更流畅通用型零件适配度更高使用更高效，，，，，，High-strength alloy material, impact resistance, no deformation, longer service life.Exquisite craftsmanship, symmetrical and refined round hole design, light structure, smoother threading.Universal parts, higher adaptability, more efficient to use.高强度合金材料，原厂精品，使用寿命更长精准加工，高品质处理，表面光洁、平滑日本东和，品牌专供，品质保证High-strength alloy material, original high quality, longer service life.Precision & high quality processing, smooth surface.Japan TOWA brand, brand exclusive supply, quality assurance.名 称：梭心代 码/：10118003Part NO 适 配：平缝系列梭芯BobbinDescription: BobbinMachine Type: Lockstitchmachine seriesDescription: Bobbin Case (Towa)Machine Type: Computerized lockstitch machine Description: Bobbin Case Machine Type: Ordinary/Direct drive lockstitch series名 称：广濑中厚料旋梭代 码：11418003/Part NO 适 配：平缝机型（除“-H”机型）名 称：广濑厚料旋梭代 码：11418004/Part NO 适 配：平缝“-H”机型名 称：JK -7.94ATR 旋梭代 码：809480/Part NO 适 配：电脑车厚料HookPrecision processing, no noiseNo thread stuck & no thread brokenAnti-counterfeiting mark, trustworthy 精准加工，无噪音不卡线、不断线防伪标志，值得信赖特殊电镀技术，使用顺畅、不卡线、不断线，使用无噪音每个旋梭，独立包装，且均印有防伪标志，方便您的查询采用优良合金钢材质，加工精度高，防刮耐用、不易变形Excellent alloy steel, Precision processing, durable scratch resistance, no deformation.Special plating technology, smooth surface, no thread stuck & no thread broken, no noise.Each hook is individually packaged and printed with anti-counterfeiting mark, easy for refer.Description: Hirose Hook (Medium Heavy Duty)Machine Type: Lockstitch Machine (Except "H" series)Description: Hirose (Heavy Duty)Hook Machine Type: Lockstitch machine "H" series Description: Hook Machine Type: Computerized Lockstitch名 称：机针DC×27#14代 码：20117013/Part NO 适 配：包缝系列名 称：机针DC×27#19代 码：20117014/Part NO 适 配：包缝系列厚料绷缝系列精准加工无毛刺少跳针、少断针、弹性好有记忆复位功能NeedlePrecision processing without burrLess jump, less break, good elasticityMemory reset function 名 称：机针DP ×5 21#(风琴)代 码：10117002/Part NO 适 配：平缝系列厚料名 称：机针DB ×1 14#(风琴)代 码：10117001/Part NO 适 配：平缝系列薄料名 称：机针DB ×1 14#(格罗茨)代 码：800114/Part NO 适 配：平缝系列薄料Description: Needle DB*1 14# Organ ()Machine Type: Lockstitch Machine series (Light duty)Description: Needle DP*5 21# (Organ)Machine Type: Lockstitch Machine series (Heavy duty)Description: Needle DB*1 14# (Groz)Machine Type: Lockstitch Machine series (Light duty)Description: DC*27#14Needle Machine Type: Overlock sewing machine Description: DC*27#19Needle Machine Type: Overlock sewing machineInterlock Sewing Machine SeriesTungsten Steel InlaySharp EdgeDurable Wear Resistant 钨钢镶嵌刀口锋利经久耐磨Upper Knife/Lower Knife名 称：下刀代 码：20701053/Part NO 适 配：包缝E4/C4/C5/C3/797/798T 系列所有厚料机型名 称：下刀（厚料）代 码：20119006/Part NO 适 配：E3-5×2-56上刀：20119001Part NO E3系列名 称：上刀（厚料）代 码：20119005/Part NO 适 配：E3-5×2-56Description: Upper Knife Machine Type: E3 series Description: Upper Knife (Heavy Duty)Machine Type: E3-5×2-56Description: Lower Knife Description: Upper Knife (Heavy Duty)Machine Type: E3-5×2-56名 称：代 码：14119002适 配：A5-W/A6 /A6F 辅助动刀 (薄料）/Part NO 名 称：辅助动刀（厚料双刀）代 码：14119005/Part NO 适 配：A5-WH/A6F-H Circular Knife Structure 高质量原料硬度高，耐用更持久产品锋利，韧性好，效率高High quality of raw materialHigh hardness, more durable life timeSharp knife with strong toughness, high efficient 名 称：分线片代 码：14112001/Part NO 适 配：A5-W/A6 /A6F Double-Knife/Circular KnifeDescription: Auxiliary Movable Knife (Heavy Duty)Machine Type: A5-WH/A6F-H Description: Auxiliary Movable Knife (Light Duty)Machine Type: A5-W/A6 /A6F Description: Needle Protect Patch Machine Type: A5-W/A6 /A6F ++++韧性足，电镀均匀，使用寿命长 定位精准，表面光滑名 称：针板代 码：11315001/Part NO 适 配：平缝“-H”与普通厚料机型针板名 称：针板代 码：20715203/Part NO 适 配：C3/C4/C5系列02/233机型名 称：针板代 码：20715005/Part NO 适 配：E4-3-02/233名 称：针板代 码：20715010/Part NO 适 配：E4-3-32R2/223名 称：针板 (倒回缝)代 码：20715019/Part NO 适 配：E4-3-82/233Needle PlateGood toughness and high strengthElectroplated evenly on the surface position well Smooth surface2.6mm 强度韧性好，耐磨不易断裂；选用20CrMo 材料，韧性足，强度高，耐磨不易断电镀均匀，不易生锈、划伤化学定位孔设计，定位精准落针孔口光滑无毛刺针板厚度，形With a proper thicknesss of 2.6mm and selected material of 20CrMo, it has good toughness and high strength, not easy to break.Electroplated evenly on the surface,not easy to get rusty and scratch.Chemical positioning hole design, accurate positioning.It is smooth inside and around the needle hole without burr.名 称：针板代 码：20115001/Part NO 适 配：E3-3-M2-04Description: Needle Plate Machine Type: Lockstitch machine Heavy-duty seriesDescription: Needle Plate Machine Type: E3-3-M2-04Description: Needle Plate Machine Type: 02/233 type for C3/C4/C5 seriesDescription: Needle Plate (BK)Machine Type: E4-3-82/233Description: Needle Plate Machine Type: E4-3-02/233Description: Needle Plate Machine Type: E4-3-32R2/223名 称：针板代 码：20115003/Part NO适 配：E3-5-M2-35名 称：针板(70款)代 码：20715016/Part NO适 配：JK-798TDIE4/名 称：针板代 码：20115008/Part NO适 配：E3-5-M2-55名 称：针板(厚料)代 码：20715206/Part NO适 配：C3/C4/JK-798TE名 称： 针板(356)代 码：30115006/Part NO适 配：W4//K4/K5系列-02BB机型W4S名 称： 针板 (364）代 码：30115007/Part NO适 配：W4/W4S/K4/K5系列-02BB机型名 称：针板(356）代 码：30115045/Part NO适 配：W4/W4S系列-23BB机型名 称： 针板 (356)(薄料)代 码：30115067/Part NO适 配：W4/W4S/K4/K5系列-01GB机型名 称：针板 (364)(薄料)代 码：30115068/Part NO适 配：W4/W4S/K4/K5系列-01GB机型名 称：针板(356)代 码：31015001/Part NO适 配：K4/K5系列-35AC机型名 称：针板 (364)代 码：31015002/Part NO适 配：K4/K5系列-35AC机型名 称：针板(356)(厚料)代 码：30115002/Part NO适 配：K4/K5系列01GBW4//W4S厚料机型名 称：针板(364)(厚料)代 码：30115003/Part NO适 配：W4/W4S/K4/K5系列01GB厚料机型名 称：针板代 码：20715204/Part NO适 配：C4/C5/JK-798TEC3/名 称：针板代 码：20715008/Part NO适 配：E4/JK-798TDI绷缝针板Interlock Machine Needle Plate名 称：针板 (01CB)(356)代 码：30715004/Part NO适 配：8670系列-01CB机型名 称：针板 (01CB)(364)代 码：30715006/Part NO适 配：8670系列-01CB机型四线 4 Thread名 称：针板代 码：20715201/Part NO适 配：C3/C4/JK-798TE名 称：针板代 码：20115002/Part NO适 配：E3-4-M2-24名 称：针板代 码：20715002/Part NO适 配：C3/E4/JK-798TDI五线 5 Thread名 称：针板 (厚料)代 码：20715050/Part NO适 配：JK-798TDIE4/名 称：针板(70款)代 码：20715205/Part NO适 配：包缝C3/C4/C5Description: Needle PlateMachine Type: E3-4-M2-24Description: Needle PlateMachine Type: C3/C4/JK-798TEDescription: Needle PlateMachine Type: C3/E4/JK-798TDIDescription: Needle Plate (Heavy Duty)Machine Type: C3/C4/JK-798TEDescription: Needle PlateMachine Type: E3-5-M2-55Description: Needle PlateMachine Type: C3/C4/C5/JK-798TEDescription: Needle PlateMachine Type: E3-5-M2-35Description: Needle Plate (70 Type)Machine Type: E4/JK-798TDIDescription: Needle PlateMachine Type: E4/JK-798TDIDescription: Needle Plate (Heavy Duty)Machine Type: E4/JK-798TDIDescription: Needle Plate (70 Type)Machine Type: C3/C4/C5Description: Needle Plate (356, Light Duty)Machine Type: 01GB type for W4/W4S/K4/K5 seriesDescription: Needle Plate (364, Light Duty)Machine Type: 01GB type for W4/W4S/K4/K5 seriesDescription: Needle Plate (356)Machine Type: 02BB type for W4/W4S/K4/K5 seriesDescription: Needle Plate (364)Machine Type: 02BB type for W4/W4S/K4/K5 seriesDescription: Needle Plate (356)Description: Needle Plate (356,Heavy Duty)Machine Type: 01GB heavy duty type forW4/W4S/K4/K5 seriesDescription: Needle Plate (364,Heavy Duty)Description: Needle Plate (356)Machine Type: 35AC type for K4/K5seriesDescription: Needle Plate (01CB,356)Machine Type: 01CB type for 8670 seriesDescription: Needle Plate (01CB,364)Machine Type: 01CB type for 8670 seriesDescription: Needle Plate (364)Machine Type: 35AC type for K4/K5 seriesMachine Type: 23BB type for W4/W4SseriesMachine Type: 01GB heavy duty type forW4/W4S/K4/K5 series名 称：送料牙代 码：11414001 /Part NO适 配：平缝"-7"机型名 称：送料牙代 码：11414002/Part NO适 配：平缝机（除"-H""-7"“A6F”机型）名 称：送料牙：11314001Part NO适 配：平缝机"-H"机型（除A6F外）名 称：送料组件代 码：20714007 / 20714008/Part NO适 配：C5系列32R/223机型E4/C4/送料组件：2011401700Part NOE3系列M2机型Description: Feed DogMachine Type: Lockstitch "-7" model Description: Feed DogMachine Type: Lockstitch(Except "-H/-7/A6F"model)Description: Feed DogMachine Type: Lockstitch"-H" model(Except "A6F" )Description: Feed AssyMachine Type: 32R/223 type for E4/C4/C5seriesDescription: Feed AssyMachine Type: M2 type for E3 series名 称：牙齿组件代 码：30214008 / 30214009 /Part NO适 配：W4//K4/K5系列-02BB机型W4S名 称：牙齿组件代 码：30214016 / 30214017/Part NO适 配：K4/K5系列-35AC机型名 称：牙齿组件代 码：30714001 / 30714002/Part NO适 配：8670系列-03FB机型名 称：牙齿组件代 码：30714003 / 30714004/Part NO适 配：8670系列-01CB机型名 称：牙齿组件代 码：3011400200/Part NO适 配：W4/W4S系列-23GB机型名 称：牙齿组件代 码：2011401900/Part NO适 配：E3-5-M2-35绷缝机牙齿Interlock Feed Dog五线 5 Thread名 称：牙齿组件代 码：2011402000/Part NO适 配：E3-5×2-56Description: FeedMachine Type: E3-5-M2-35Dog名 称：牙齿组件 (70款)代 码：2071401700/Part NO适 配：E4/C3/C4/C5/798T系列-03/233机型Description: Feed Dog (70 Type)Machine Type: 03/233 type for E4/C3/C4/C5/798T series名 称：牙齿组件 (厚料)代 码：2071405200/Part NO适 配：E4/C3/C4/C5/798T系列-A04/435机型Description: Feed Dog (Heavy Duty)Machine Type: A04/435 type for E4/C3/C4/C5/798T series名 称：牙齿组件代 码：2071400400/Part NO适 配：E4/C3/C4/C5/798T系列-03/333机型Description: Feed DogMachine Type: 03/333 type for E4/C3/C4/C5/798T seriesDescription: FeedMachine Type: E3-5×2-56Dog：3011400300系列23BB机型Description: Feed DogMachine Type: 02BB type for W4/W4S/K4/K5 seriesDescription: FeedMachine Type: 35AC type for K4/K5 seriesDogDescription: FeedMachine Type: 01CB type for 8670 seriesDog Description: FeedMachine Type: 03FB type for 8670 seriesDog Description: FeedMachine Type: 23GB type for W4/W4S seriesDog名 称：压脚组件(厚料)代 码：1131600100/Part NO 适 配：平缝机厚料机型（除-N 以外）名 称：压脚组件(薄料)代 码：1131600600/Part NO 适 配：平缝机机型（除厚料机型外和-N 以外）名 称：塑料压脚代 码：811049/Part NO 适 配：平缝机通用名 称：单边带刀压脚组件 (P36LN)代 码：1411600300/Part NO 适 配：平缝带“-N”机型名 称：短距缝带刀压脚组件代 码：1411600400/Part NO 适 配：平缝带“-N”机型压脚平缝压脚Lockstitch Presser Foot名 称：塑料带刀压脚代 码：11411600100/Part NO 适 配：平缝带“-N”机型名 称：带刀压脚组件代 码：1411600100/Part NO 适 配：平缝带“-N”机型名 称：带刀压脚组件（3/16）代 码：1411601000/Part NO 适 配：平缝带“-N”机型Presser foot带刀压脚Presser Foot With KnifeDescription: Presser Foot (Heavy Duty)Machine Type: All heavy duty lockstitch series (Except N type)Description: Presser Foot (Light Duty)Machine Type: All nomal lockstitch series (Except heavy duty& N type)Description: Plastic Presser Foot Machine Type: All lockstitch machine seriesDescription: Plastic Presser Foot With Knife Machine Type: A5-WN 、A4S-NDescription: Presser Foot With Knife Machine Type: A5-WN 、A4S-NDescription: Presser Foot With Single Side Knife (P36LN)Machine Type: A5-WN 、A4S-NDescription: Presser Foot With Knife (Short Distance Sewing)Machine Type: A5-WN 、A4S-NDescription: Presser Foot With Knife (3/16)Machine Type: A5-WN 、A4S-N名 称：压脚组件代 码：2101600300/Part NO适 配：E3-4-M2-24名 称：压脚组件代 码：2081600500/Part NO适 配：797T/798T系列M03/333机型，798T系列M04/435机型名 称：压脚组件（倒回缝）代 码：2071601800/Part NO适 配：E4-4-83/323E3-4-M5-23,名 称：压脚组件代 码：2071609400/Part NO适 配：/C5/系列-M03/333机型C3/C4名 称：压脚组件代 码：2081600300/Part NO适 配：798T系列-A04/435机型Description: Presser FootMachine Type: A04/435 type for 798Tseries四线 4 Thread名 称：压脚组件代 码：2071600200/Part NO适 配：/C3系列-M03/333机型E4C5-4-83/323机型Description: Presser FootMachine Type: M03/333 type for E4/C3series , C5-4-83/323名 称：压脚组件代 码：2071601000/Part NO适 配：E3-3-M1-15名 称：压脚组件代 码：2071600500/Part NO适 配：E3/E4/C5系列02/233机型名 称：压脚组件代 码：2061603100/Part NO适 配：E4/C4/C5系列-32R2/223机型包缝压脚Overlock Presser Foot三线 3 ThreadDescription: Presser FootMachine Type: E3-3-M1-15Description: Presser FootMachine Type: 02/233 type for E3/E4/C5seriesDescription: Presser FootMachine Type: 32R2/223 type for E4/C4/C5 series名 称：代 码：1381601500适 配：平缝带“-N”机型右高左低()压脚组件CR1/16N/Part NO名 称：右高左低压脚组件()CR1/32代 码：1401600300/Part NO适 配：平缝带“-N”机型名 称：左高右低压脚组件()CL1/16N代 码：1381601300/Part NO适 配：平缝带“-N”机型名 称：左高右低压脚组件()1/32LN代 码：1411600200/Part NO适 配：平缝带“-N”机型Description: Right High Left LowFoot With Knife (CR1/16N)PresserMachine Type: A5-WN、A4S-NDescription:Foot With Knife (CR1/16N)Right High Left Low PresserMachine Type: A5-WN、A4S-NDescription:Foot With Knife (CL1/16N)Left High Right Low PresserMachine Type: A5-WN、A4S-NDescription:Foot With Knife (1/32LN)Left High Right Low PresserMachine Type: A5-WN、A4S-NDescription: Presser FootMachine Type: E3-4-M2-24Description: Presser FootMachine Type: M03/333 type for 797T/798Tseries, M04/435 type for 798T series名 称：压脚组件代 码：2111600100/Part NO适 配：C5-M03/333 机型KSDescription: Presser FootMachine Type: C5-4-M03/333 KSDescription: Presser Foot (BK)Machine Type: E3-4-M5-23E4-4-83/323Description: Presser FootMachine Type: M03/333 type for C3/C4/C5series名 称：压脚组件 (薄料)代 码：20716050/Part NO 适 配：E4-5-02A/233五线5 Thread名 称：压脚组件（70款)代 码：2081600700/Part NO 适 配：798T-03/233，798T-04/435/H 名 称：压脚组件（厚料）代 码：2081600600/Part NO 适 配：798T-A04/435机型名 称：压脚组件代 码：2080101400/Part NO 适 配：798T 系列-03/333机型名 称：压脚组件代 码：2071600600/Part NO 适 配：/C4/C5系列E4/C3-03/333机型，E3-5-M2-35名 称：压脚组件(70款)代 码：2071601500/Part NO 适 配：E4/C3/C4/C5系列-03/233机型，E3-5-M2-55名 称：压脚组件 (厚料)代 码：2061604000/Part NO 适 配：E4/C3/C4/C5系列A04/435机型，E3-5×2-56Description: Presser Foot Machine Type: 03/333 type for E4/C3/C4/C5 series ，E3-5-M2-35Description: Presser Foot (70 Type)Machine Type: 03/233 type for E4/C3/C4/C5 series ，E3-5-M2-55Description: Presser Foot (Heavy Duty)Machine Type: A04/435 type for E4/C3/C4/C5 series ，E3-5×2-56Description: Presser FootMachine Type: 03/333 type for 798T seriesDescription: Presser Foot ( Light Duty)Machine Type: E4-5-02A/233Description: Presser Foot (70 Type)Machine Type: 798T-03/233，798T-A04/435/HDescription: Presser Foot (Heavy Duty)Machine Type: JK-798T-5-516-A04/435绷缝压脚Interlock Presser Foot名 称：压脚组件(356)代 码：3011601300/Part NO 适 配：W4/W4S 系列01GB/23GB 机型； 8670系列01CB 03FB机型/名 称：压脚组件(356)代 码：3021601000/Part NO适 配：/ K5系列01GB 机型；K4 8670系列01CB/03FB 机型名 称：压脚(364)代 码：30116006/Part NO 适 配：/ K5/W4/ K4系列W4S 02BB/23BB 机型Description: Presser Foot (364)Machine Type: 02BB/23BB type for W4S/ K5/W4/ K4 series名 称：压脚(356)代 码：30116005/Part NO 适 配：W4S / K5/W4/ K4系列02BB/23BB 机型Description: Presser Foot (356)Machine Type: 02BB/23BB type for W4S/ K5/W4/ K4 seriesDescription: Presser foot ( 356)Machine Type: 01GB/23GB type for W4/W4S series, 01CB /03FB type for 8670 seriesDescription: Presser foot ( 356)Machine Type: 01GB type for K4/K5 series, 01CB/03FB type for 8670 series弯针名 称：代 码：20117007适 配：E3-4线系列上弯针/Part NO 名 称：弯针代 码：30217003/Part NO 适 配：K5/K4/8670系列名 称：弯针组代 码：3011700900/Part NO 适 配：W4S/W4系列Polishing processing, smooth without burrSpecial process, high hardness, wear resistance not easy to break抛光处理，光滑无毛刺特殊工艺，硬度高，耐磨不易断裂LooperDescription: Upper Looper Machine Type: E3-4 seriesDescription: LooperMachine Type: K5/K4/8670 seriesDescription: LooperMachine Type: W4S/W4 series名 称：针夹头 (五线厚料)代 码：20719056/Part NO 适 配：C5/C4/C3/E4/798TD/798TE 系列名 称：针夹头 (五线)代 码：20734003/Part NO 适 配：C5/C4/C3/E4/798TD /798TE 系列名 称：针夹头 (五线70款)代 码：20734004/Part NO 适 配：C5/C4/C3/E4/798TD/798TE 系列名 称：针夹头（四线）代 码：20734002/Part NO 适 配：4线机型和无纺布机型包缝所有名 称：针夹头 (356)代 码：30134001/Part NO 适 配：W4S/K5/W4/K4/8670系列名 称：针夹头（364)代 码：30134002/Part NO 适 配：W4S/K5/W4/K4/8670系列名 称：针夹头（三线）Description: Needle Clamp (4 Thread)Machine Type: 4 thread and non-woven fabric overlock seriesDescription: Needle Clamp (5 Thread)Machine Type: C5/C4/C3/E4/Description: Needle Clamp (5 Thread 70 Type)Machine Type: C5/C4/C3/E4/Description: (5 Thread Heavy Duty)Needle Clamp Machine Type: C5/C4/C3/E4/Description: Needle Clamp ( 356)Machine Type: W4S/K5/W4/K4/8670 all seriesDescription: Needle Clamp ( 364)Machine Type: W4S/K5/W4/K4/8670 all series杰克原厂 抗磨能力强 不易挥发Jack original, Strong wear resistance, Not easy to volatilize机器适配机油，原厂原装，机器更顺畅抗磨能力强、不易挥发匹配度高，机器跑合更顺畅JackMachine adapter oil, original, smoother sewing.Strong wear resistance, not easy to volatilize.Higher match, machine running more smoothly .白油名 称：代 码：810735专利纱剪/Part NO 名 称：代 码：810736铁纱剪(小号)/Part NO Description: Patent Yarn ScissorDescription: Metal Scissor (S)名 称：代 码：810737铁纱剪(大号)/Part NO Description: Metal Scissor (L)Tapeline皮尺/卷尺名 称：代 码：810746小号卷尺/Part NO 名 称：代 码：810745中号卷尺/Part NO 名 称：代 码：810744大号卷尺/Part NO Automatic positioning, one-key recycling, metric feet, easy to carry自动卡位 一键回收 公制英尺 便于携带名 称：代 码：81074715GL 皮尺/Part NO 轻拉皮尺即可，停手就能自动卡位双面刻度印刷Pull the tapeline, it can automatically positioning when stop.Double-side scale printed.Fabric Scissor服装剪一体成型，弧型手柄，更贴合人体工程学设计长时间剪裁不会硌手剪尖平头处理，不带头，不扎布；剪刃经过多道工序精磨抛光，刃面光泽自然专利压槽，剪布不跑布。
32026小方头式电脑绷缝机零件手册说明书
零件手册Parts Manual32026小方头式电脑绷缝机Small square head computerized stretch sewing machine一,机壳部件绷缝系列>32026>一、机壳部件序号品号CODE名称NAME数量1BF31016206590油标OIL LEVEL GAUGE1 2BF31016250117机壳螺钉BED PIN4 3BF31016240228油封PLUG1 4BF31016240052油封PLUG1 5BF31016240052油封PLUG1 6BF31016240110油封PLUG1 7BF32026210003油封PLUG1 8BF32026209084油封COVER1 9BF31016240226密封盖PLUG1 11BF7005M109油封PLUG1 12BF31016124滤油网PLUG1 13BF31016240001滤油网卡簧FILTER1 15/油线FELT1 16/盖板组件COVER1 17BF31016250020盖板COVER1 18BF32026250157盖板垫SPONGE1 19BF320267017螺钉SCREW2 21/铆钉PIN2 22/铆钉PIN2 26BF310164541螺钉SCREW1 27PF1900A0704螺钉SCREW1 28/商标牌NAME PLATE1 29BF310164539螺钉SCREW2 30BF700M83油封OIL SEAL1 31/警示标贴SEAL1 32/警示标贴CAUTION LABEL1 33/警示标贴SEAL1 34/警示标贴SEAL1 35/警示标贴CAUTION LABEL1二,罩壳部件绷缝系列>32026>二、罩壳部件序号品号CODE名称NAME数量1BF31016250149上盖ARM COVER (TOP)1 2BF31016240226密封盖PLUG1 3BF31016179107油标盖OIL SIGHT WINDOW1 4BF31016250019上盖密封圈O RING1 5BF310167021螺钉SCREW7 6BF32026250151机头左盖ARM COVER (LEFT)1 7BF310165242螺钉SCREW1 8BF32026250153机头左盖密封圈O RING1 9BF310167021螺钉SCREW4 10BF31016240263垫圈WASHER1 11BF32026250154后盖板ARM COVER (REAR)1 12BF32026250155后盖板垫GASKET1 13BF310167052螺钉SCREW6 14BF31016250021护罩NEEDLE BAR GUARD1 15BF310167019螺钉SCREW2 16BF31016250022皮带轮护罩PULLEY COVER1 17/螺钉SCREW2 18BF32026250159链条钩挡板AIR GUIDE1 19BF310167079螺钉SCREW2 26BF31016250255护罩座BRACKET1 27BF310167020螺钉SCREW2 28BF31016303448垫片WASHER2 29BF31016250256护罩架BRACKET1 30BF310167066螺钉SCREW1 31/波形垫圈WASHER1 32BF31016250257有机玻璃罩EYE GUARD1 33BF8007008螺钉SCREW2 35/过线护罩组件THREAD TAKE-UP GUARD ASSEMBLY 1 36BF31016250225过线护罩THREAD TAKE-UP GUARD1 37BF31016250226过线护罩环FINGER GUARD1 38BF310167018螺钉SCREW2 39BF31016303448垫片WASHER2 40BF31016250227过线护罩座BRACKET1 41BF310167018螺钉SCREW2 42BF31016303448垫片WASHER2 43BF310167052螺钉SCREW2 44/警标标贴SEAL1三,缝台部件26293117-1绷缝系列>32026>三、缝台部件序号品号CODE名称NAME数量1BF310167020螺钉SCREW3 2BF32026BE0302缝台BED COVER1 3BF32026BE0303缝台块BED COVER1 4BF32026BE0304左盖TOP COVER1 5BF310167020螺钉SCREW3 6BF32026BE0306左盖架SIDE COVER1 7BF32026BE0307销子PIN1 8BF310164554螺钉SCREW2 9BF32026BE0309密封垫GASKET1 10/销 PIN1 11BF310167009螺钉SCREW2 12BF32026250263垫块BRACKET1 13BF310164554螺钉SCREW2 14BF310167022螺钉SCREW2 15/垫片WASHER3 16/螺钉SCREW1 17BF32026BE0317前罩缝台组件BED COVER1 18/缝台盖板TOP COVER1 19BF310167043螺钉SCREW4 20BF32026BE0320销钉SCREW1 21BF31016210025防震垫CUSHION2 22BF32026250161盖板垫GASKET1 BF32026BE0322盖板垫GASKET1 23BF32026250160盖板TOP COVER1 24BF310167082螺钉SCREW8 25/块HINGE1 26BF320267018螺钉SCREW3 27BF32026167079过线THREAD GUIDE1 28BF32026BE0328过线THREAD GUIDE1 29BF32026BE0329卡簧FLAT SPRING1 30BF310167019螺钉SCREW1 31BF8007018螺钉SCREW12715 142928四,下轴部件3031绷缝系列>32026>四、下轴部件序号品号CODE名称NAME数量1/下轴CRANKSHAFT1 2BF310164543螺钉SCREW1 3/下轴后轴CRANKSHAFT1 4/螺钉SCREW2 5BF3202625055591下轴组件CRANKSHAFT ASSEMBLY1 6/下轴后轴铜连杆组件CONNECTION1 7/螺钉SCREW4 8/下轴球曲柄CRANK1 9BF310164534螺钉BOLT1 10BF3202625055791蜗杆组件BUSHING1 11BF310164547螺钉SCREW2 12BF31016250529轴承套组件BUSHING1 13BF310164547螺钉SCREW2 14BF32026BE0414下轴同步带轮GEAR (LOWER)1 15BF310164547螺钉SCREW4 16BF31016250530轴承套组件BUSHING1 17BF310164555螺钉SCREW1 18BF310164547螺钉SCREW1 19BF31016250514挡圈SET PLATE1 20BF310167082螺钉SCREW2 21BF32026250556风扇FAN1 22BF32026250561皮带轮MACHINE PULLEY1 23BF310164541螺钉SCREW1 24BF310164556螺钉SCREW1 25BF31016240126垫圈WASHER1 26BF310164500螺钉SCREW1 27BF32026BE0427同步带TIMING BELT1 28BF32026BE0428小同步轮GEAR (LOWER)1 29BF310164547螺钉SCREW2 30BF32026415主轴前套BUSHING1 31BF32026416主轴中套BUSHING131五,上轴部件77-1绷缝系列>32026>五、上轴部件序号品号CODE名称NAME数量1BF3202635AB250526C1针杆曲柄组件MOTION ASSEMBLY1 2BF310167028螺钉SCREW2 3BF310164592螺钉SCREW1 4BF310167152螺钉SCREW1 5BF310167153螺钉SCREW1 6BF310167268螺钉SCREW1 7BF32026250560A上轴CRANKSHAFT1 8/上轴铜连杆组件CONNECTION ASSEMBLY1 9/螺钉SCREW2 10/螺钉SCREW2 11/上轴球曲柄CRANK ASSEMBLY1 12/螺钉BOLT1 13BF31016250524上轴平衡块JOINT1 14BF310164514螺钉SCREW2 15BF31016250506接轴套SCREW1 16BF310164555螺钉BALANCE WEIGHT2 17BF310164547螺钉SCREW2 18BF31016250518上轴中轴SHAFT1 19BF31016250529轴承套组件BUSHING1 20BF310164547螺钉SCREW2 21BF32026BE0521上轴同步带轮GEAR (UPPER)1 22BF310164547螺钉SCREW4 23BF31016250528轴承套组件BUSHING1 24BF310164555螺钉SCREW1 25BF310164547螺钉SCREW1 26BF3101605250566手轮HANDWHEEL1 27BF310164541螺钉SCREW1 28BF310164556螺钉SCREW1 29BF310164501螺钉WASHER1 30BF31016204585垫片BOLT 1 31BF31016250519上轴后轴SHAFT15647332423342221六,针杆部件3536383739404142绷缝系列>32026>六、针杆部件序号品号CODE名称NAME数量1BF3202625101491针杆NEEDLE BAR1 2BF31016206061针杆连接柱NEEDLE BAR CLAMP1 3BF310165325螺钉SCREW1 4BF32026251016针杆连杆LINK1 5BF3202635AB251010A针杆连杆销PIN1 6BF31016081212针杆连杆滚针轴承NEEDLE BEARING1 7BF32026205097垫圈WASHER 1 8BF31016206063L针杆滑块BLOCK1 9BF32026251017滑块导座GUIDE1 10BF310167021螺钉SCREW2 11BF32026251018毛毡弹簧LATCH1 12BF310167021螺钉SCREW1 13BF3101617904005毛毡SPONGE1 14BF31016206524油线托OIL STRING RETAINER1 15/油线120mm OIL STRING1 16BF31016257518针古NEEDLE HOLDER1 17BF310164554螺钉SCREW3 18BF310164554螺钉SCREW2 19BF32026BE0619针板NEEDLE PLATE1 BF32026BE06191针板(364)NEEDLE PLATE1 20BF320265511HC螺钉SCREW2 21BF32026BE0621挡圈ECCENTRIC1 22BF9000139螺钉SCREW2 23BF32026BE0623护针曲柄LEVER1 24BF310167086螺钉SCREW1 25BF32026251512护针架NEEDLE GUARD HOLDER (REAR) 1 26BF32026257567后护针NEEDLE GUARD (REAR)1 27BF310164543螺钉SCREW1 28BF32026251513护线曲柄LEVER1 29BF8007013螺钉SCREW1 30BF32026251514护线架NEEDLE GUARD HOLDER (FRONT) 1 31BF32026257568前护针NEEDLE GUARD (FRONT)1 32BF310164543螺钉SCREW1 33BF320267041螺钉SCREW1 34BF32026BE0634护针套筒SLEEVE1 35BF32026BE0635针板座NEEDLE PLATE BRACKET1 36BF32026BE06351定位销PIN2 37BF32026BE06352限位销PIN138/磁铁2 39BF32026623针杆上套BUSHING1 40BF31016627针杆下套BUSHING1 41BF32026625护针轴套BUSHING1 42BF320266251护针轴套（短）BUSHING1七,弯针部件424443绷缝系列>32026>七、弯针部件序号品号CODE名称NAME数量1BF3202625203692凸轮ECCENTRIC1 2BF310164547螺钉SCREW1 3/滚针轴承NEEDLE BEARING1 4/连杆ROD1 5BF3202625203791滑杆销PIN ASSEMBLY1 6BF310164805螺母NUT1 7BF31016240062垫片WASHER1 8BF32026252039滑杆架LOOPER SHAFT GUIDE1 9/止摆轧头GUIDE1 10/弹簧垫片SPRING WASHER1 11/螺钉SCREW1 12BF32026252044下弯针连杆轴SHAFT1 13BF32026240232垫片WASHER1 14BF8897110螺钉BOLT1 15/弹簧垫片SPRING WASHER1 16BF32026240231垫片WASHER1 17BF3202625204692下弯针轴曲柄LEVER1 18BF310164534螺钉BOLT1 19BF32026252040前挡块HOLDER1 20BF310167021螺钉SCREW1 22BF32026252042滑块SLIDER1 23BF32026252043堵头PIN1 24BF310164543螺钉SCREW1 25BF3202625204592后挡块HOLDER1 26BF320262520531弯针架LOOPER HOLDER1 27BF31016200152A1铜油嘴JOINT SCREW1 28BF32026BE0728过线THREADGUIDE1 29BF320267129螺钉SCREW1 30BF32026257566弯针LOOPER1 31BF32026252047挡块垫片WASHER2 32BF32026252052后套BUSHING1 33PF1900A0704螺钉SCREW1 34BF32026BE0734前套BUSHING ASSEMBLY 1 35BF32026231011O形圈O RING1 37BF32026252048滑杆SHAFT1 38BF320267145螺钉SCREW1 39PF1900A0280螺钉SCREW1 40BF32026BE0740油棉FELT1 41/回油管PIPE1 42BF32026BE0742油棉盖OIL COVER1 43BF32026728弯针轴前套BUSHING1 44BF32026729弯针轴后套BUSHING1八,针距部件454647绷缝系列>32026>八、针距部件序号品号CODE名称NAME数量1BF3202625260792送布组件ECCENTRIC1 2BF310164539螺钉SCREW2 3/滚针轴承NEEDLE BEARING1 4/滚针轴承NEEDLE BEARING1 5/卡簧RING1 6/卡簧RING1 7/连杆ROD1 8BF32026252609曲柄CRANK1 9BF310164531螺钉BOLT1 10BF32026240055垫圈WASHER1 11BF320267041螺钉SCREW1 12/偏心连杆ROD1 13/连杆LINK1 14/连杆LINK1 15BF310164543螺钉SCREW2 16BF32026252613销子PIN2 17/油线OIL STRING2 19BF32026252616曲柄销PIN1 20/油线OIL STRING1 22BF32026252617曲柄CRANK1 23BF320267142螺钉SCREW2 24BF3202625261891曲柄LINK1 25BF310164547螺钉SCREW2 26BF32026252622针距调节挡板GUIDE1 27BF310164539螺钉SCREW1 28BF32026252620拉簧SPRING1 29BF320267131螺钉SCREW1 30BF32026252621针距指示轴SHAFT1 31BF32026240017O形圈O RING1 32BF32026252623指示板LEVER1 33BF310167028螺钉SCREW1 34BF32026252624刻度板INDICATION PLATE1 35BF320267044螺钉SCREW2 36BF32026252625针距调节（杆）组件SCREW1 37/卡簧RING1 38/卡簧RING1 39BF32026240251O形圈O RING1 40BF320264550螺钉SCREW1 41BF310164543螺钉SCREW1 42BF32026252626垫圈LINER143/调节螺母NUT1 44/指示板SEAL1 45BF31016233020O形圈O RING1 46BF32026836针距轴套BUSHING1 47/针距调节轴套BUSHING1九,送布部件424341464147404440464945383948绷缝系列>32026>九、送布部件序号品号CODE名称NAME数量1BF3202625724316送布牙MAIN FEED DOG1 2BF3202625729016差动牙DIFF. FEED DOG1 3BF310167082螺钉SCREW1 4BF310167019螺钉SCREW1 5BF310167019螺钉SCREW2 6BF32026BE0906差动曲柄DIFFERENTIAL CRANK1 7BF8897110螺钉SCREW1 8BF32026252637衬套BUSHING1 9BF31016240049垫片WASHER1 10BF8897056螺钉SCREW1 11BF32026BE0911牙架挡板GUIDE (LEFT)1 12BF32026BE0912定位销PIN1 13BF32026BE0913差动牙架DIFFERENTIAL BRACES1 14BF32026BE0914送布牙架FEED DOG STAND1 15BF32026BE0915滑块BLOCK1 16BF32026BE0916抬牙轴CRANKSHAFT1 17BF32026BE0917连杆LINK1 18BF32026BE0918衬套BUSHING1 19BF32026BE0919螺钉SCREW1 20BF310164500螺钉SCREW1 21BF32026BE0921螺钉SCREW1 22BF32026BE0922锥形垫片WASHER1 23BF32026BE0923连接销PIN1 24BF32026BE0924差动摆动曲柄LINK1 25BF32026252636差动连杆LINK1 26BF32026BE0926销PIN1 27BF310164500螺钉SCREW1 28BF32026BE0928曲柄LINK1 29BF32026BE0929差动轴LINK1 30/油线OIL STRING1 31/钉销PIN1 32/油线OIL STRING1 34BF32026252632抬压滑块BLOCK1 35BF700K091213滚针NEEDLE BEARING1 36BF32026252628右挡板GUIDE (RIGHT)1 37PF1900A0704螺钉SCREW1 38BF32026240239挡圈COLLAR1 39BF310164547螺钉SCREW1 40BF3202624023592挡块COLLAR2 41BF310164547螺钉SCREW242BF310167028螺钉SCREW1 43BF310164805螺母NUT1 44BF32026204052油封OIL SEAL1 45BF32026240241油封OIL SEAL1 46BF32026938抬牙轴前套BUSHING2 47BF32026940抬牙轴后套BUSHING1 48BF32026941送布轴前套（差动BUSHING1 49BF32026942送布轴后套（差动BUSHING1十,压脚部件383739绷缝系列>32026>十、压脚部件序号品号CODE名称NAME数量1BF31016253000调压螺杆ADJUSTING BAR1 2BF31016253003调压螺母NUT1 3BF32026240252调压簧SPRING1 4BF31016240253压脚轴小弹簧SPRING1 5BF32026253026压脚轴PRESSER BAR1 6BF31016253018压脚轴密封垫OIL SHIELD1 7BF31016206139压脚轧头PRESSER BAR CLAMP1 8BF310165118螺钉SCREW1 9BF31016253005导块GUIDE1 10BF310167025螺钉SCREW2 11BF310167010螺钉SCREW1 12BF31016202875垫片WASHER1 13BF31016253008抬压轴LEVER1 14BF31016192024挡圈COLLAR1 15BF3101605W00241螺钉SCREW1 16BF31016206157压脚轧头连接板LINK1 17BF310165386螺钉SCREW2 18BF31016253010抬压轴簧SPRING1 19BF31016206156挡圈COLLAR1 20BF310165084螺钉SCREW2 21BF31016206149抬压曲柄ⅠBELL CRANK (UPPER) 1 22BF310165187螺钉SCREW1 23BF32026253027抬压曲柄连接板LINK1 24BF310165184螺钉SCREW1 25BF31016206148抬压曲柄ⅡBELL CRANK (LOWER) 1 26BF310162022螺钉SCREW1 27BF31016253013抬压轴SHAFT1 28BF31016253014抬压轴扳手LEVER1 29BF310167028螺钉SCREW1 30BF31016253015支板BRACKET1 31BF310167019螺钉SCREW2 32BF310164549螺钉SCREW1 33BF310164805螺母NUT1 34BF31016253028压脚护罩FINGER GUARD1 35BF31016257461压脚PRESSER FOOT ASSEMBLY1 36/螺钉SCREW1 37BF31016240585油封OIL SEAL1 38BF320261123压脚轴套BUSHING1 39BF310161142抬压脚轴套BUSHING1十一,喂针部件18192025262727绷缝系列>32026>十一、喂针部件序号品号CODE名称NAME数量1/绷针凸轮ECCENTRIC ASSEMBLY1 2/螺钉SCREW2 3/绷针连杆CONNECTION1 4BF31016254503绷针摆动曲柄CRANK1 5BF310164534螺钉BOLT1 6BF31016254504连杆销SCREW1 7BF31016240062垫片WASHER1 8BF310164805螺母NUT1 9BF31016254519摆动连杆轴SHAFT1 10BF31016206180垫圈WASHER1 11/卡簧RING1 12BF31016254506绷针摆动连杆CRANK1 13BF310164547螺钉SCREW2 14BF31016254507绷针摆动销BLOCK1 15BF32026254518绷针摆动架CRANKSHAFT1 17/油线OIL STRING1 18BF31016210586油封OIL SEAL1 19BF31016212039挡圈COLLAR1 20BF310161227螺钉SCREW2 21BF31016254516绷针架LEVER ASSEMBLY1 22BF310167020螺钉SCREW1 23BF310167022螺钉SCREW1 24BF31016257565绷针SPREADER1 25BF31016240584垫片WASHER1 26BF320261218绷针轴套BUSHING1 27BF310161230摆动连杆轴套BUSHING1十二,松线部件绷缝系列>32026>十二、松线部件序号品号CODE名称NAME数量1BF31016254000松线轴LEVER1 2BF31016254022轴套COLLAR1 3BF310162133螺钉SCREW1 4BF31016254003B松线曲柄CRANK1 5BF310164531螺钉BOLT1 6BF31016202868垫片WASHER1 7BF31016254008过线架THREAD GUIDE1 8BF310167019螺钉SCREW2 9BF31016192120夹带柱PIPE2 10BF31016254009压板BRACKET1 11BF320267018螺钉SCREW1 12BF31016303448垫片WASHER1 13BF31016254023E-43针5线夹线器组件TENSION CONTROL MECHANISM1 14/过线板BRACKET1 15/过线调节板THREAD RELEASER1 16/调线组件（中）TENSION SPRING ASSEMBLY1 17/调线组件（弱）TENSION SPRING ASSEMBLY (LIGHT)1 18/调节板簧SPRING1 19/螺钉SCREW1 20/调线组件（强）TENSION SPRING ASSEMBLY (HEAVY)3 21/二孔过线板ⅠTHREAD GUIDE5 22/二孔过线板ⅡTHREAD GUIDE5 23/垫圈SPACER5 24BF310167019螺钉SCREW2 25/夹线廷SCREW STUD5 26/夹线片TENSION DISC10 27/调压止动盖CUP5 28/调压簧（强）SPRING (HEAVY)3 29/调压簧（中）SPRING (MEDIUM)1 30/调压簧（弱）SPRING (LIGHT)1 31/调压止动套RATCHET5 32/调压螺母NUT5十三,过线部件5151绷缝系列>32026>第十三、过线部件序号品号CODE名称NAME数量1BF31016240201挡圈COLLAR1 2BF8002193螺钉SCREW2 3BF31016253503过线座轴SHAFT1 4BF31016204107垫片WASHER1 5BF31016201252弹簧垫圈SPRING WASHER1 6BF310164527螺钉BOLT1 7BF700M83油封OIL SEAL1 8BF31016240102垫片WASHER1 9BF31016253504过线座LEVER1 10BF310164501螺钉BOLT1 11/弹簧垫圈SPRING WASHER1 12BF31016253505长过线THREAD TAKE-UP1 13BF310167019螺钉SCREW2 14BF31016303448垫圈WASHER2 15BF31016253507三孔过线THREAD GUIDE1 16BF310167009螺钉SCREW1 17BF31016253508过线板THREAD GUIDE1 18BF310167077螺钉SCREW1 19BF31016253509护线罩THREAD SUPPORT1 20BF31016202588垫片WASHER1 21BF8007008螺钉SCREW1 22BF31016253544硅油盒固定架THREAD GUIDE1 23BF310167019螺钉SCREW1 24BF31016303448垫圈WASHER1 25BF31016253545针杆过线座HOLDER1 26BF31016234521过线杆THREAD GUIDE1 27BF310164535螺钉SCREW1 28BF310167010螺钉SCREW2 29BF31016253516U形夹线座THREAD TENSION BRACKET 1 30BF310167019螺钉SCREW1 31BF31016234561夹线板THREAD GUIDE1 32BF31016253593夹线片TENSION DISC1 33BF31016253517弹簧SPRING1 34BF31016W90702螺钉SCREW1 35BF31016253506长过线压板THREAD TAKE-UP1 36BF31016253515过线板THREAD GUIDE1 37BF310167019螺钉SCREW1 38BF31016253514绷针过线THREAD GUIDE1 39BF310167019螺钉SCREW240BF31016253548绷针过线板THREAD GUIDE1 41BF310167019螺钉SCREW2 42BF31016303448垫片WASHER2 43BF31016253547绷针二孔过线THREAD GUIDE1 44BF310167167夹线螺钉SCREW1 45BF31016137108夹线片TENSION DISC2 46BF31016211388弹簧SPRING1 47BF31016253511绷针小过线THREAD GUIDE1 48BF310164554螺钉SCREW1 50BF31016275034螺母KNOB1 51BF31016835弯针过线轴套BUSHING2十四,打线凸轮部件绷缝系列>32026>十四、打线凸轮部件序号品号CODE名称NAME数量1BF32026BE1401销PIN2 2BF310167009螺钉SCREW3 3BF32026BE1403打线片THREAD GUIDE1 4BF31016005过线片（右THREAD GUIDE1 5BF31016004过线片（左THREAD GUIDE1 6BF32026BE1406复位弹簧SPRING1 7BF32026BE1407打线架扳手FIGHT LINE WRENCH1 8BF32026BE1408轴位螺钉SCREW1 9BF32026BE1409挡块STOP1 10BF32026BE1410打线架BRACKET1 11BF32026BE1411打线架挡圈FIGHT LINE RETAINING RING1 12BF32026BE1412复位弹簧SPRING1 13BF310167023螺钉SCREW1 14BF32026BE1414卡簧片SPRING1 15BF320267018螺钉SCREW1 16BF32026BE1416轴位螺钉SCREW1 17BF32026BE1417打线凸轮LOOPER THREAD TAKE-UP1 18BF310164543螺钉SCREW2 19BF32026BE1419挡圈COLLAR1 20BF32026BE1420轴承6902Z BEARING2 21BF32026BE1421轴承套BUSHING2 22BF310164547螺钉SCREW7 23BF32026BE1423小同步带SMALL TIMING BELT1 24BF32026BE1424小同步轮TIME BELT1 25BF32026BE1425凸轮轴SHAFT1 26BF8004533螺钉SCREW4 28BF320267018螺钉SCREW2 29BF32026BE1429盖板COVER1 30BF32026BE1430凸轮座CAM SEAT1 31BF310167167调压螺钉SCREW1 32BF31016211388夹线簧SPRING1 33BF31016137108夹线片THREAD RETAINER2 34BF32026BE1434过线THREAD GUIDE1 35BF310167079螺钉SCREW1 36BF32026BE1436托板LAYER1 37/波形垫片WASHER2 38BF32026BE1438密封垫CAM GASKET1 39BF32026BE1439盖板COVER1 40/机型牌STICKER141BF310167018螺钉SCREW4 42/柳钉PIN2 43BF32026BE1443护罩SHIELD1 44BF31016275034调压螺母ADJUSTING NUT1 46BF32026BE1446羊毛垫STICKER1Ⅰ15十五,供油部件（1）Ⅰ绷缝系列>32026>十五、供油部件（1）序号品号CODE名称NAME数量1BF32026BE1501喷油管PIPE1 2BF31016255037过油螺钉JOINT SCREW1 3/油管TUBE1 4BF310162001361油管接头JOINT2 5BF31016202199油管夹CLAMP2 6BF32026200152过油螺钉JOINT SCREW2 7BF31016255003铜油管PIPE1 8BF31016240136油毡FELT1 9/大头针PIN1 10BF310164514螺钉SCREW1 11BF31016255021油毡FELT1 12BF31016255005压簧LATCH1 13BF320267018螺钉SCREW1 14/油管套TUBE1 15/油管TUBE1 17/油管TUBE1 18BF31016202199油管夹CLAMP4 19BF32026255099接油盘OIL RELEASE PLATE1 20BF320267018螺钉SCREW2 21BF31016255007喷油管OIL SPLASH PIPE1 22BF310164821螺母NUT1 23/油管TUBE1 24BF31016202199油管夹CLAMP2 25BF3202625509491喷油管OIL SPLASH PIPE1 26BF310162001362油管接头JOINT1 27BF32026200152过油螺钉JOINT SCREW1 28BF31016202199油管夹CLAMP1 29BF32026255100910吸油管OIL DRAIN PIPE1 30BF32026255102吸油管PIPE1 31BF320267017螺钉SCREW1 32/油管TUBE1 33BF141126油管夹CLAMP1 34BF32026240245油棉FELT1 35/油管TUBE1 36/油管TUBE1 37BF320267018螺钉SCREW1 38BF32026255039油管TUBE1 39/油管TUBE1十六,供油部件（2）24绷缝系列>32026>第十六、供油部件（2）序号品号CODE名称NAME数量1BF32026255041油盘OIL RESERVOIR ASSEMBLY1 2BF800202287A油封WASHER1 3BF8005318B放油螺钉SCREW1 4BF310164504螺钉BOLT4 5BF32026255144油盘密封圈O RING1 6BF32026BE1606油泵组件OIL PUMP ASSEMBLY1 7/油泵轴SHAFT1 8/五星轮ROTOR1 9/五星轮ROTOR1 10/五星套ROTOR1 11/油泵盖COVER1 12/螺钉SCREW2 13/螺钉SCREW2 14/油泵蜗轮WORM WHEEL1 15/螺钉SCREW2 16/螺钉BOLT2 17BF31016200152A油管接头JOINT SCREW2 18BF700M156滤油器OIL FILTER1 19BF31016210200螺钉OIL FILTER BRACKET1 20BF31016206431O形圈O RING1 21BF31016210201滤油器盖COVER1 22BF310167021螺钉SCREW3 23/警示标贴FILTER SEAL1 24BF31016200152A1油管接头JOINT1871716十七,硅油盒装置部件绷缝系列>32026>第十七、硅油盒装置部件序号品号CODE名称NAME数量1/上硅油盒组件SILICONE OIL RESERVOIR (UPPER) 1 2BF31016207066上硅油盒SILICONE OIL RESERVOIR (UPPER) 1 3BF31016207067上硅油盒盖CAP1 4/开口销SPRING PIN2 5/木螺钉SCREW2 6BF31016207068硅油棉FELT1 7BF32026BE1707下硅油盒SILICONE OIL RESERVOIR ASSEMBLY1 8BF310167082螺钉SCREW2 9BF32026255107固定架NEEDLE COOLER (LOWER) 1 10BF310167019螺钉SCREW1 11BF32026240247硅油棉FELT1 12/大头针PIN1 13/油管TUBE1 14/油线OIL STRING1 16BF32026BE1716硅油盒挡板SILICONE OIL BOX BAFFLE1 17BF32026BE1717硅油盒上盖SILICONE OIL BOX COVER1十八,油盘托板部件绷缝系列>32026>第十八、油盘托板部件序号品号CODE名称NAME数量2BF310162063381油盘减振垫CUSHION RUBBER4 3BF31016206336螺钉固定头NUT4 4BF31016259000承重板REST BOARD2 5BF310164512螺钉BOLT4 6BF31016206337垫圈WASHER12 7BF700M186连接套CUSHION RUBBER4 8/减震垫套LINER4 9BF310167093螺钉SCREW4 10BF31016206329卡板TREADLE CHAIN GUIDE1 11BF310167027螺钉SCREW2 12BF31016205467减振垫SPACER4 14BF310162063381油盘减振垫CUSHION RUBBER4 15/螺钉组件SCREW (SET)4 16BF32026207073支柱SCREW4 17BF32026207074卡簧RING4 18/垫圈WASHER4 19/弹簧垫圈SPRING WASHER4 20BF320265020螺母NUT4 21BF32026259003TBO皮带护罩BELT COVER1 22/木螺钉SCREW3十九,线架部件绷缝系列>32026>十九、线架部件序号品号CODE名称NAME数量1BF7005M17线架组件(五线)THREAD STAND ASSY.1 2/线架上棒COLUMN PIPE (UPPER) 1 3/线架下棒COLUMN PIPE (LOWER) 1 4/锁紧卡固JOINT1 5/螺钉SCREW2 6/螺母NUT2 7/长过线架BRACKET1 8/短过线架BRACKET1 9/固定板HOLDER2 10/螺钉SCREW2 11/线棒SPOOL PIN5 12/垫片SPRING WASHER5 13/螺母NUT5 14/线托盘SPOOL TRAY5 15/托盘垫SPOOL MAT5 16/线固定套SPOOL RETAINING FIN5 17/棒架BRACKET1 18/螺钉SCREW1 19/螺母NUT1 20/线棒THREAD GUIDE BAR 1 21/螺钉SCREW1 22/螺母NUT1 23/固定器BRACKET1 24/螺钉SCREW1 25/螺母NUT1 26/过线棒THREAD GUIDE BAR 1 27/过线棒THREAD GUIDE BAR 1 28/螺钉SCREW1 29/螺母NUT1 30/长线架BRACKET1 31/短线架BRACKET1 32/固定板HOLDER2 33/螺钉SCREW2 34/过线套THREAD GUIDE5 35/棒冒ROD CAP1 36/垫片WASHER2 37/弹性垫片SPRING WASHER1 38/螺母NUT1二十,缝台部件8-1绷缝系列>32026>二十、缝台部件序号品号CODE名称NAME数量1/销PIN1 2BF310167009螺钉SCREW2 3/垫块BRACKET1 4/螺钉SCREW2 5BF310167022螺钉SCREW2 6/垫片WASHER2 7/缝台座螺钉SCREW1 8BF32026BE0317缝台（组件BED COVER1 9/缝台盖板TOP COVER1 10/螺钉SCREW4 11BF32026BE0320销钉PIN1 12BF31016210025防震垫CUSHION2二十一,02专用件1101311571234152689 14绷缝系列>32026>二十一、02专用件序号品号CODE名称NAME数量1BF32026BE2101缝台组件(02型FRONT COVER ASSEMBLY1 2BF32026BE2102缝台块(02型BED COVER1 3BF32026BE2103挡板座(02型HINGE1 4BF32026BE2104挡板(02型AUXILIARY PLATE (FRONT COVER) 1 5BF32026BE2105挡料片(02型FABRIC GUARD1 6BF32026BE2106缝台小盖板(02型COVER1 7BF32026BE2107支架(02型BRACKET1 8/缝台盖板TOP COVER1 9/缝台支架BED COVER1 10BF310167043螺钉SCREW3 11BF320267017螺钉SCREW2 12BF8007008螺钉SCREW2 13BF310167009螺钉SCREW2 14BF310167043螺钉SCREW1 15BF310167019螺钉SCREW1 18BF3101602BB206460压板WASHER1 19BF310167027螺钉SCREW2 20/压板CLAMP PLATE 1 21/螺钉SCREW2 22/螺钉SCREW1 23/垫片WASHER1 24BF3101602BBTB托盘组件TAPE GUIDE ASSY.1 25/托盘TAPE BASE1 26/垫片WASHER1 27/上棒PIN1 28/下棒TAPE DISC POST1 29/螺钉SCREW1 30/托盘座BRACKET1 31/木螺钉SCREW3 32/螺栓SCREW2 33/弹性垫片WASHER2 34/螺母SPRING WASHER2 35/垫片NUT2 36/短棒PIN2 37/座HOLDER2 38/螺钉SCREW4 39/导棒TAPE GUIDE BAR1 40/螺钉SCREW2 41/螺钉NUT2 42/导棒座HOLDER1二十二,35专用件（1）39绷缝系列>32026>二十二、35专用件（1）序号品号CODE名称NAME数量1BF3202635AB255552曲柄CRANK1 2BF310164547螺钉SCREW2 3BF3202635AB7057螺钉SCREW1 4BF31016240049垫圈WASHER1 5BF889240542A轴套BUSHING1 6BF3202635AB255553螺母NUT1 7BF3202635AB255554曲柄CRANK1 8BF310164547螺钉SCREW1 10BF3202635AB252557A连杆LINK1 11/油线OIL STRING1 12/油线OIL STRING1 13BF3202635AB255077卡板LATCH1 14BF3202635AB7061螺钉SCREW1 15BF3202635AB255555轴SHAFT1 16BF3202635AB230030垫圈WASHER1 17BF3101605306105弹簧SPRING1 18BF3202635AB255546螺母NUT1 19BF3202635AB255549座BRACKET ASSEMBLY1 20BF310164501螺钉螺钉2 21BF3202635AB4502螺钉螺钉1 23BF3202635AB25556491上刀座UPPER KNIFE HOLDER ASSEMBLY 1 24BF310167028螺钉SCREW1 25BF3202635AB257574上刀UPPER KNIFE1 26BF3202635AB7062螺钉SCREW1 27BF3202635AB255560下刀座LOWER KNIFE HOLDER1 28BF3202635AB7030螺钉SCREW1 29BF3202635AB204161A下刀LOWER KNIFE1 30BF3202635AB25555891下刀压板LOWER KNIFE CLAMP ASSEMBLY 1 31BF700S050螺钉SCREW1 32BF3202635AB255615挡板WASTE CHUTE TOP 1 33BF8007012螺钉SCREW2 34BF32026BE2234排料管SUCTION PIPE ASSEMBLY1 35/紧箍HOSE BAND1 36BF32026BE2236固定板LATCH1 37BF9000622螺钉SCREW2 38/气管接头JOINT1 39BF32026BE2239抬牙轴SHAFT1。
JUKI LZ-2290A系列直接驱动高速电子平缝曲折缝缝纫机 说明书
油箱
油盘构造（微量加油型）
安全开关
在广泛地范围可对应多样化的工序
规格
标准
防止布料错位 防止鸟巢 防止布料错位·鸟巢
无切线 LZ-2290ADS LZ-2290ADS-0B LZ-2290ADU LZ-2290ADU-0B
– –
干机头型
带自动切线
LZ-2290ADS-7-WB
LZ-2290ADU-7-WB
均等 标准
月芽型（右） 变形 均等
针状线 针状线 自行设 均等 迹(左） 迹(右） 计花样
缝制
新型操作控制盘 IP-100
显示部位采用了液晶显示。缝 制形状，针摆幅以及基线位置 等通过图形和设定值显示在同 一画面上，易于理解，提高了 操作盘的操作性能。 追加了程序缝（定尺寸缝）、循 环缝、连续缝等，电子缝纫机 上的机能，通过这些机能可对 应各式各样的工序。
●自行设计花样
·可储存、制作原始缝制花样。 ·最大 10 个花样，最大 20 步 / 花样，1 步最
大 500 针。
(制作例)
可在操作控制盘上简单地制作原始的缝制花样，进行试缝。 设计的变形花样范围非常广泛，可对应从内衣到女装、男装。
无需配备输入装置或 ROM.
●压缩自行设计的花样＊需要返缝装置。
·可设定原始的压缩缝制，可防止跳线，对套结部能起到很好的效果。 ·缝制开始，缝制结束，最大 20 个花样，最大 64 步／花样。 ·自动切线缝纫机，切线后的线头长度比原来要短。
直接驱动高速电子平缝曲折缝缝纫机
LZ-2290A 系列
LZ-2290ASS-7-WB
曲折缝纫机的标准机 LZ-2290A 系列
在1台上可对应多样化花样缝的LZ-2290A系列
SINGER 111-10 缝纫机零件手册说明书
目录CONTENTS页码一、机壳部分 Frame Components1二、罩壳部件(1) Cover Components(1)3三、罩壳部分(2) Cover Components(2)5四、曲轴部件 Crankshaft Drive Components7五、针杆机构 Needle Drive Mechanism9六、上弯针机构 Upper Looper Drive Mechanism11七、下弯针机构 Lower Looper Drive Mechanism13八、送布机构(1)Feed Mechanism(1)15九、送布机构(2)Feed Mechanism(2)19十、上刀机构 Knife Drive Mechanism21十一、压脚机构 Presser Foot Mechanism23十二、紧线机构 Thread Tension Mechanism25十三、挑线机构 Thread Guide＆Thread Mechanism27十四、润滑机构(1)Lubrication Mechanism(1)29十五、润滑机构(2)Lubrication Mechanism(2)31十六、H.R.装置 H.R.Device33十七、线架装置 Thread Stand35十八、托盘附属品装置 Parts For Semi-submerged Installation37十九、专用部件 (1) Specific Parts(1)39二十、专用部件 (2) Specific Parts(2)41二十一、专用部件 (3) Specific Parts(3)43二十二、专用部件 (4) Specific Parts(4)45二十三、专用部件 (5) Specific Parts(5)47二十四、797直驱部件/797Direct Drive Assemblies49二十五、随机附件部分 Accessories Assemblies51标准度量零件表Standard measurement part list53From the library of: Superior Sewing Machine & Supply LLC三线四线五线three-thread four-thread five-thread1P030102010020销5×16Pin 1112P030172101820销5×10Pin 1113P030182402990销4×40 Pipe 1114204260012400940定位销Pin 1115205130082403250过线管Pipe 2226206S300012700470支柱Bed Pin 4447R030012106790铆钉Pin 2228207S11007007019A0螺钉M4×7.5Screw 3339207220042403100油塞Plug 11110301261———缝头Bracket 11111301181———797机壳（喷漆）machine frame 111Note: Part for 797DI with No.11 machine case is on page of 797DI special parts, others are the same on this page.数量（Number）一、机壳部分/Machine Bed Frame序号NO.公司件号Part NO.注：797DⅠ机型将代号为11的机壳换成797DⅠ直驱部件，其他零件同本页。
GEM20U系列曲折缝纫机使用说明书
GEM20U SERIESZIGZAG SEWING MACHINE 系列曲折缝缝纫机非常感谢您购买本公司的工业缝纫机。
在使用缝纫机之前，请仔细阅读<为了您的安全使用>和使用说明书。
工业缝纫机的特性之一，是要在机针和旋梭等运动零部件附近进行操作，而这些零部件很容易引起受伤的危险，所以请在接受过培训的人员或有熟练操作技术的人员的指导下，正确地使用本缝纫机。
为了您的安全使用1.安全使用的标记及其意义本使用说明书及产品所使用的标记和图案记号是为了您的安全而正确地使用本产品，防止您及他人受到危害和损害。
表示方法及含义如下：说明图案和符号圆圈中的图案表示必须要做的内容。
(如左图的符号表示“必须接地”。
)危险注意如果忽视此标记而进行了错误的操作，必将导致人员死亡或重伤。
如果忽视此标记而进行了错误的操作，有可能会引起人员受伤及造成设备损坏。
符号△表示“应注意事项”。
三角中的图案表示必须要注意的内容。
(如左图的符号表示“注意受伤”。
)符号○表示“禁止”。
符号●表示“必须”。
Thank you very much for buying our sewing machine.Before using your new machine,please read the safety instructions below and the explanations given in the Operation Instruction.With industrial sewing machines,it is normal to carry out work while positioned directly in front of moving parts such as the needle and thread take-up lever,and consequently there is always a danger of injury that can be caused by these parts.Follow the instructions from training personnel and instructors regarding safe and correct operation before operating the machine so that you will know how to use it correctly.SAFETY INSTRUCTIONS1.Safety indications and their meaningsThis instruction manual and the indications and symbols that are used on the machine itself are provided in order to ensure safe operation of this machine and to prevent accidents and injury to yourself or other people.The meaning of these indications and symbols are given below.IndicationsDANGER CAUTIONThe instructions which follow this term indicate situations where failure to follow the instructions will almost certainly result in death or severe injury.The instructions which follow this term indicate situations where failure to follow theinstructions could cause injury when using the machine or physical damage to equipment and surroundings.SymbolsT his symbol (△) indicates something that you should be careful of. The picture inside the triangle indicates the nature of the caution that must be taken.(For example, the symbol at left means"beware of injury".)This symbol (○) indicates something that you must not do.This symbol (●) indicates something that you must do. The picture inside the circle indicates the nature of the thing that must be done.(Forexample,thesymbol atleft means "you must make the groundconnection".)安全注意事项打开控制箱盖时，必须先关闭电源开关并将电源插头从插座上拔下，至少等待5分钟后，再打开控使用环境Notes On Safety安全注意事项Notes On Safety1245556677888999101011111113-441.技术规格及用途 Main Technical Specifications And Application ......................................................2.机器安装 Installation ......................................................................................................................3.操作准备 Installation ......................................................................................................................4.缝线的选择 Selection of stitches ....................................................................................................5.机针缝线和缝料的配合 Coordination of needle Thread and material ................................................6.机针安装 Assemblage of needle ....................................................................................................7.绕梭心线 Winding thread around the shuttle core .........................................................................8.穿面线和引底线 Threading surface and Bottom stitches .................................................................9.装梭心 Mounting of shuttle core ....................................................................................................10.装卸梭心套 Mounting and Dismounting of the case (of the shuttle core)......................................11.针距的调节 Adjustment of needle distance ..................................................................................12.压脚压力的调节 Adjustment of the pressure of presser foot .........................................................13.绣花机绣花前准备工作 Preparations before embroidery ................................................................14.缝线的张力 Tension Of Stitches ...................................................................................................15.底线张力的调节 Adjustment of Bottom sitich Tension ...................................................................16.面线张力的调节 Adjustment of the surface stitch Tension .............................................................17.横针针迹对称位置调节 Regulation of symmetrical position of horizontal stitches .........................18.旋梭定位 Location of rotating shuttle .........................................................................................19.针杆高度 Height of the needle staff ............................................................................................20.旋梭的装卸 Mounting and Dismounting of Rotating shuttle ........................................................21.一般故障及其处理方法 Faults Locating And How To Treat ............................................................零件样本 .....................................................................................................................................1.技术规格及用途 Main Technical Specifications And Application名 称Description 曲折缝Curved-stitching双针曲折缝Double Curved-stitching最大线迹长度Max. length of stitches5毫米5mm直齿 12毫米(23/43/63)Straight tooth 12mm(23/43/63)5毫米5mm斜齿 8毫米(33/53/93/123T/457C)Straight tooth 8mm(33/53/93/123T/457C)帽眼 6毫米(53B)Cap apertare 6mm(53B)双针间距Distance between double stitches 手提Hand stitch 膝提Kneeing stitch压脚提升高度Height of presser foot最大缝纫厚度机针规格Max. Thickness of sewing Specification of needle6毫米(指单针摆动宽度)6mm (Swaying width of single needle)2.5,3.5,4.5(可换)2.5,3.5,4.5(changeable)不小于6毫米No less than 6mm12毫米12mm不少于8层纱卡No less than 8 layers不少于8层纱卡No less than 8 layers12毫米12mm不小于6毫米No less than 6mm最高缝速Max. Speed 2000针/分2000 stitches/minDP×5 (Nm70-130)缝线ThreadNO.40-100涤棉线或类似丝线NO.40-100 terylene and the likeNO.40-100涤棉线或类似丝线NO.40-100 terylene and the like机头体积(长×宽×高)Dimension of machine head (L W H)××540250370毫米××540×250×370mm19/25.5≥250W净重/毛重N.W/G.W 电动机功率Motor power用途Application粗缝、拼缝、套结缝及一般Z 字形缝For rough stitching loop stitching and z-shape stitching双针条状及曲折装饰缝For double stitching and curved-stitching decorations最大提升宽度Max. Swaying width2.机器安装 Installation(1)油盘安装：用四只圆钉②将油盘①固定在台板框孔内，并确保油盘至台板面距离为25毫米，油盘右边缘与台板右框边平齐。
缝纫机操作指南
缝纫机操作指南1、电源连接：将脚踏控制器一端插入机器，将另一端插入电源插座。
2、脚踏控制器的操作：越往下踩机器运转的速度越快，反之机器的运转速度变慢，脚踏控制器处于自由状态时，机器停止运转。
3、更换灯泡：需要更换灯泡时，松开前罩固定螺钉，卸下前罩。
向下向左旋转卸下灯泡，向上右转转入灯泡。
4、机针的装卸与检查：旋转上轮，使机针停在最高位置。
机针固定螺旋旋转，松开机针并取下，将新机针柄部磨平的一面与针杆容针槽底相对，往上装到底，然后旋转机针固定螺钉，锁紧机针即可。
5、压脚的装卸：转动上轮，使机针停在最高点，抬起压脚扳手，按压压脚后面的扳手，写下压脚，将所需的压脚横销对准压脚座上的沟槽，放下压脚座，锁住压脚。
6、面线张力调节：理想的线迹在面线与梭线交织在布的中间，面线太松，将夹线张力调节螺母数值大的方向旋转。
面线太紧，将夹线张力调节螺母向数值小的方向旋转。
7、梭线张力调节：若通过面线张力调节还达不到理想线迹，可以调节梭心套螺钉以改变梭线张力。
8、针距调节：针距调节旋钮上所标的数字为针距长度，单位毫米。
旋转针距调节旋钮，选择合适的针距，使其数字与标记相对即可。
针距调节旋钮至“SS”时，与花型选择旋钮配合形成符合花型。
9、倒缝按钮操作：按下倒缝按钮即可。
10、花型选择旋钮：进行花型选择时须先停机器，使机针离开缝料。
若选择一种线迹缝纫，旋转花型选择旋钮，使代表线迹的字符与定位标记相对。
当针距调节旋钮选择“0-4”时，能进行“A”-“J”等十种形式缝纫及锁钮孔。
当针距调节旋钮选择“SS”时，能进行“A”-“J”十种复合花型缝纫。
11、装卸梭心套：转动上轮，使机针离开针扳面，打开摆梭前盖。
打开梭心套上的梭门盖，取下梭心套。
把绕好线的梭心装进梭心套，从梭心中拉出约10厘米长的线，并注意出线时梭心的转向。
将机针引入梭心套。
再从梭心套长槽内抽出。
把机针转到最高点，使梭心套的长柄对准梭床盖缺口，扣住梭心套扳手，按入梭床中内，将线端置于梭床外。
缝纫机 说明书
使用说明书安全须知当使用缝纫机时，必须遵守基本安全注意事项，这些事项包括：使用之前请务必阅读使用说明书。
危险 -为了降低触电的危险：1. 缝纫机在无人看管时，切勿将电源线插头插入电源插座。
使用后和清洁前请务必从电源插座中拔出缝纫机的电源线插头。
2.更换照明灯泡前，请务必拔出缝纫机的电源线插头。
请更换额定功率为15W的同类型灯泡。
警告-为了降低灼伤、火灾、触电或人身伤害的危险：1. 请勿将本缝纫机作为玩具使用。
当儿童使用本缝纫机或使用缝纫机时附近有儿童时，请务必悉心看护。
2. 只能将本缝纫机用于本说明书规定的用途。
只能使用厂商在本说明书中推荐的配件。
3. 当电源线或插头破损、缝纫机不能正常工作、发生过跌落或损坏或曾掉入水中时，切勿继续使用。
请将缝纫机送到就近的授权代理经销商或维修服务中心，请专业人员对其进行检修、电气或机械调整。
4. 操作缝纫机时切勿堵塞任何通风口。
要确保缝纫机的通风口和脚踏控制器中不要堆积任何飞绒、灰尘或碎布。
5. 切勿让任何物体掉进开口或将异物插入任何开口。
6. 请勿在室外使用。
7. 请勿在使用喷雾剂或存放氧气的场所使用本缝纫机。
8. 若要断开缝纫机电源，请先将主电源开关置于“{”位置（表示关闭），然后再从电源插座拔出插头。
9. 拔插头时请勿直接拉电源线。
请握住插头部分（而不是电源线）将它拔出。
10.请勿用手指触碰任何运动部件。
在缝纫机针附近要特别小心。
11.请务必使用合适的针板。
使用不合适的针板会引起断针。
12.请勿使用弯曲的针。
13.缝制过程中请勿推或拉布料。
否则可能引起针弯曲或断针。
14.在针附近进行穿针线、更换针、梭芯穿线或更换压脚等调整操作时，请务必先将缝纫机的电源开关置于“{”位置关闭电源。
15.当打开机盖、上润滑油或进行其他本说明书中提到的用户维护·调整操作时，请务必从电源插座中拔出缝纫机的电源线插头。
16.在没有监护的情况下，本缝纫机不适合年幼儿童或残疾人使用。
缝纫机说明书
亲爱的客户：您好！当你看到这个文件的时候，我知道你在缝纫机的使用上遇到了难题，不要着急哈，缝纫机技术含量稍微多些，下面我列出来缝纫机的面线穿线方法和底线上线的方法和开机前布和线放的位置图亲，你一一对照着做这一段话非常实用，帮助很多买家解决了问题：开机前是不是先手动走几步了，穿线的时候是不是每个孔都穿过去了，面线每一步穿好用手拉是否顺畅，面线经过松紧调节钮那个地方的时候是不是放在2个铁片中间了，装针的时候是平面背对着人，另外一个方面是针孔哪里的穿线是不是穿反了，还有一个就是底线轴是不是顺时针的方向放进去的，还有一个就是顶针螺丝的方向是不是反了，换好一点针和好一点线试试机子，换适合这种布料的针试试，厚的地方用手转动手轮过去，薄的地方电动走过去，面线可以换金属线轴当面线试试。
很关键的一个问题，就是穿线，下面先看看背面的穿线穿线的步骤从第一部起，线轴上面的盖子最好不要盖盖的话很容易导致线轴比较紧，线轴太紧不容易活动很容易把线扯断，第二个箭头那里，线经过的时候要拉一下看看线紧不紧，如果太紧的话也是容易断线的，要放上去很顺畅才可以，再看看正面的穿线步骤：注意：穿这个线时要注意线一定要夹在红色箭头所示的两个铁片中间。
每一步的每一个孔都要传过去的，另外，压脚螺丝的放法也要注意哦，和图片上一样的放法或者把螺丝反过来试试，就是下面的铁片在上面，上面的铁片在下面。
接下来，就是开机前的三个步聚图，亲们要好好对照一下，线和针和布的位置哦！第一步就是详细的介绍怎么带底线亲首先要打开梭芯盖板，然后把绕有线的梭芯放进去，这时候要注意把一根线头露在外面，接着把上线穿好，左手拿住上线的线头，右手转动手轮，这样就能很轻松地把底线带上来了哦另外下面我列出常见的几种问题的解决方法：1.开机没有反应A：首先转动一下手轮看看会不会动，如果不会动，就是卡线了或者底盘卡住了，把线全部拿下，重新穿线就好了了，或者把线轴和托盘拿出来重新装好，线轴要顺时针放进去；B: 如果会动，就考虑是皮带掉了，皮带掉了不要着急，你一手扶着机子，一手活动着把手轮卸下来，如果活动着卸不下来，可以用一个硬的物体撬一下手轮，皮带是黑色的，然后把皮带装好，在把手轮复位哦，如果皮带装不上，可能是装皮带下面那个小轮子也掉了，先把下面的小轮子弄好，然后把上面的皮带装好，在把手轮复位哦，C手轮转动机子可以走，如果皮带没有掉，就找几个电池试试，装上电池如果可以动了，就是变压器坏了，换个变压器即可。
缝纫机767 零件手册
Teileliste und NaeheinrichtungenSpare Parts List and Sewing Equipment767Postfach170351,D-33703Bielefeld•Potsdamer Straße190,D-33719BielefeldTelefon+49(0)521/925-00•Telefax+49(0)521/9252435•Ausgabe/Edition:Änderungsindex Teile-Nr.:/Part-No.: 03/2007Rev.index:01.0Printed in Federal Republic of Germany0791767801Alle Rechte vorbehalten.Eigentum der Dürkopp Adler AG und urheberrechtlich geschützt.Jede,auch auszugsweise Wiederverwendung dieser Inhalte ist ohne vorheriges schriftliches Einverständnis der Dürkopp Adler AG verboten.All rights reserved.Property of Dürkopp Adler AG and copyrighted.Reproduction or publication of the content in any manner,even in extracts,without prior written permission of Dürkopp Adler AG,is prohibited.Copyright©Dürkopp Adler AG-2007Tei l e-Nr./Part-No.Be n en n ung/Des.T a f el/Table Tei l e-Nr./Part-No.Be n en n ung/Des.Tafel/TableKlas s e / Class: 767In d ex Aus g a b e/Edi t i o n:03.2007APP001132Hal t es t u e ck30C4MG41004073Spanpl. Schr.30H2, 30G4, 29F3 MG43000401Ge s ta e n g e K15H11, 16H11MG53007921Win k el25.1K827.1G1MG53007922La s che25.1K8, 27.1F1N800005214Trae g er b lech K11B8N800005216Trae g er b lech K12F1MG53007921Win k el25K3, 27G1MG53007922La s che25K3, 27F1N800005218Stiftschr.12G1N800005219Raen d el m ut t er12F1S080953287Ein s atz 1.1H1S315262085Ke g el f e d er8.1E9, 8.2E12,20M5 Z100010701Knie s chal t er27M7 00020075049500Wipp s chal t er29B3, 30A2 0016004010Filz s chei b e3C3, 3C12, 3D7 0037001280Fa d ensp.Schei b e3B1, 3B8, 10B7,10.1A5 0052000369Oel k an n e20C20053000350Schei b e1D6, 1.1D6, 1J11 0061001050Steg s chei b e3C3, 3C12, 3D7 0067000904Band r ol l en h al t er20H80067001560Sperr f e d er1D3, 1.1D4 0067001770Druc k fe d er6G11, 6L11 0067002470Ha k en5E4, 5E10 0067150170Stop f en11F8, 12A8 0067160490Bol z en1K50067320150Druc k fe d er10D9, 10.1G3, 10L9 0067351680Bol z en8E1, 8E3, 8F5,8.2H9, 8.4J9 0068000280Fad.an z ugs f e d er3E60068000660Druc k fe d er8E10068001830Fe d er5L8, 5F3, 5F9 0068004910Fad.an z ugs f e d er3E30068004930Fa d e n anz.Fe d er3E40068005330Schei b e3H2, 3J6 0068005350Fa d enf.Bol z en3H2, 3J6 0068111030Druc k fe d er3H2, 3J6 0069000833Ban d einf.Plat t e11A9, 12F3 0069120020Stop f en4M1, 5M2 0077110220Auf l a g e20C60077110230Zen t riers t ueck20B70081001390Schei b e11A80081003080Druc k plat t e11J30081004910Drucks t ueck11J30088002320Huelse3H2, 3J6 0099004800Ke g el f e d er(1,4D)3C12, 3D3, 3E7 0099004910Ke g elst.Fed.(1,1D)3C12, 3D3, 3E7,3E100099004930Dec k schei b e3E3010*******Auf l a g e20E3010*******Win k el16H50167001800Spu l e 6.1B3, 7.1J3,(schwarz m.Ra e n d el)10A11, 20L2 0167005050Ab f all b lech11J90167150270Spu l e7I6, 7J11,8H2,8E12,10G11, 20L2 0167330020Mes s er11L20167331030Druc k fe d er10C90168160110Bol z en31D20170100030Schutz s top f en10C8, 10J8, 10.1E20196001890Druc k fe d er10.1C5, 10B11,10H11 0199002740Stan g e20K3021*******Gew. Stift1C8, 1F8, 2C6, 2C9 022*******Schei b e3B1, 3B7, 10B7,10G11, 10.1B5 022*******Vor s pan n ung K10B7, 10G9, 10.1B3 022*******Buch s e3B1, 3B8, 10B7,10G11, 10.1B5 022*******Ver t ei l er,kpl.26E5022*******Knie p lat t e K20L8023*******Zyl. Stift3C10024*******A Spu l e7J11, 8E12, 20L27I6, 7J11, 8E12,8.2D12 024*******Lip p en r ing 1.1J3, 1.1J7,1.1L1, 1M6 0266340143Drucks t an g e V31D40266340160Zugs t an g e31E50266340170Bol z en31B50266340193Luefter h e b el31D10266340280La s che31E20268110050Fa d ensp.Bol z en3C11027*******Ska l a k nopf3D12027*******Gew. Stift m. Zapf.1.1E12 027*******Li.Senkschr.25.3K7, 25.3M5 029*******Fa d en f u e h r ung2K1029*******Schei b e6A2, 6A3 029*******Dicht s chei b e1D5, 1.1D5 029*******Lu e f t ungs r ohr V1D3, 1.1D3, 9E2,9E7, 9L7 029*******Spannr. Ach s e1D6, 1.1D6 029*******Span n ungs f e d er10L1, 10.2K6 029*******La g er V1C6, 1.1C6 029*******Hau b e20C40367100040Hand r ad2D10367100044Hand r ad2C10367100050Flansch2E20367100063La g er h u e l s e K,hi1B11, 1E12 0367100080Buch s e10D90367100090Bol z en10C90367100130Rie m en s chutz20F70367100150Bol z en20F60367100170Nip p el9C2, 9C6, 9L6 0367100180Schau g las9H80367100190Rohr9K60367100240Schutz b lech9D3, 9D7, 9K8 0367100260Oel r ohr9B1, 9B5, 9H5 0367100284Arm w el l e1B90367100300Druc k fe d er9D1, 9D5, 9K5 0367100353La g er h u e l s e1C10, 1F10 0367100360Rie m en s chutz hi20F5, 26C10 0367100390Fe d er b ue g el9C2, 9C6, 9J6 0367100420Hand r ad2B20367100424Hand r ad2B20367100430Rie m en s chei b e2B10367100480Bol z en10J8, 10.1D2 0367100490Schutz b lech10J8, 10.1D2 0367100510Ab d e c kung10J8, 10.1D2 0367105910Bol z en15L10367100593Oel r ohr9B1, 9B5 0367100610Oel s chlauch9B3, 9B80367100633Einst. Schei b e10H80367100643Einst. Schei b e V10H7, 10.1C5, 25H4 0367110010Oese2B5, 2B8, 2G2 0367110033Fa d enh.Len k er V2A5, 2A7, 2F2 0367110040Len k er b ol z en2B4, 2B7, 2G1 0367110050Dicht s chei b e2B5, 2B8, 2B12,2F3 0367110070Buch s e2B5, 2B8, 2B12,2F3 0367110100Zap f en5E8, 5E9, 5J7 0367110110Span n ungs p lat t e3C7, 3D3 0367110120Bol z en3C2, 3D7 0367110130Hu e l s e3D1, 3D5 0367110140Schei b e3D70367110150Ha k en3C3, 3C7 0367110160Buch s e3E1, 3E5 0367110164Fa d en f u e h r ung3E30367110170Bol z en3F1, 3F5 0367110183Dec k schei b e V3E11, 3F2, 3G7 0367110203Aus l oes e he b el10E2, 10.2L1 0367110220Einst. Mut t er10E4, 10.2L4 0367110240Druc k knopf3C3, 3C7 0367110254Fa d en f u e h r ung3E60367110270Zugs t an g e10D2, 10.2K1 0367110280Mag n et t rae g er10.2J11 0367110290Buch s e3E11, 3F2, 3G7 0367110300Koer p er3G2, 3H1, 3H5, 3J5 0367110304Fa d enf.Koer p er3H1, 3J5, 3J7 0367110310Fa d enf.Blech3G2, 3H5 0367110333Ha k en3G2, 3H6 0367110334Fa d en f u e h r ung3G2, 3H5, 3H7 0367110340Fa d e n anz.Rol l e3E10,3F2, 3F6, 3G6 0367110350Zwi s chen s chei b e3E10, 3F2, 3F6 0367110360Schei b e3E10, 3F2, 3F7,3G6 0367110370Fa d en o e s e3C2, 3D5 0367110380Stift3C2, 3C5 0367110390Stift3D60367110423Klo b en K10D3, 10.2J3 0367110433He b el5F80367110440Fe d er3E70367110460He b el5F4, 5F10, 5L9 0367110470Druc k fe d er10.1A5 0367110480Mag n et t rae g er10E5, 10.2L5 0367110490Stan g e10E4, 10.2L4 0367110510Klemm p lat t e3C90367110520Fa d enh.Kur b el2C7, 2H1 0367110530Kur b el2C40367110544Fa d en f u e h r ung3E40367110554Fa d en f ueh r ung3E70367110570Fe d er3C3, 3C7 0367110580Fa d en f ueh r ung3C2, 3C5 0367110593He b el K5D2, 5J7 0367110600Ha k en10L3, 10.2J8 0367110610Bol z en10L3, 10.2K8 0367110633Aus l oes e he b el10L1, 10.2K6 0367110640Klo b en10L4, 10.2J10 0367120013Na d elstg.Ge l enk2D5, 2D8, 2C10,2C120367120023Na d elstg. Klob. V2D4, 2D7, 2H1 0367120030Buch s e11J5, 12A4, 12B11,12B12, 27A7 0367120040Gleits t ein2D6, 2D9, 2H30367120050Gleit f ueh r ung1J10367120080Nip p el1J1, 1K1, 7E11,8F8,8.2G6, 12A6, 12E4 0367120093Klemm k lo b en1J3, 1J4 0367120100Oel s chei b e1K20367120110Gew. Bol z en2C6, 2C9, 2H3 0367120193Na d elstg.Gelnk2H20367120260Fa d en o e s e2K2, 2M2, 30C2,30C50367120270Plat t e1K1, 1L2 0367120284Na d elstg.Schwin g e1L20367120800Nip p el8.4H50367130130Bol z en5B2, 5B8, 5G7 0367130140Fu e hr.Buch s e5F3, 5F9, 5L8 0367130153Stell r ing K1J8, 1J11, 5D3,5D9, 5J8 0367130170Buch s e1J12,5C2, 5C4,5C5,5C10, 5D8, 5H8,5H10, 5J7, 5L9,1K8 0367130180Buch s e5D1, 5D7, 5J6 0367130240Lu e f t er h e b el5B12, 5G11 0367130253Lu e f t er k lo b en K5B5; 5B10, 5H10 0367130263Klo b en20K30367130273Spin d el V5B2, 5B8, 5G7 0367130290Ar r e t ier b ol z en5F3, 5F9, 5M8 0367130340Gleit l a g er5D1, 5D3, 5D7,5D9, 5J6 0367130440Zug f e d er5E4, 5E10, 5K9 0367130600Druc k fe d er5C1, 5C7, 5H6 0367130624Knie h e b el20L30367130633Fueh r ung4E1, 4E5, 4E9 0367130640Gleits t ein4D1, 4D6 0367130680Oel d ocht4E2, 4E6 0367130710Hu e l s e5C1, 5C7, 5H6 0367130720Stan g e5C1, 5C7, 5H6 0367130920Buch s e4F2, 4F6 0367130960Stan g e5E5, 5E11, 5K10 0367130964He b el K5F12, 5F6, 5M11 0367130970Ku g el b ol z en5G11, 5G5, 5M10 0367140020De c kel1D6, 1.1D6 0367140030De c kel d ich t ung1E5, 1.1E5 0367140040Oel a n z ei g er1D6, 1.1D6 0367140050Schar n ier20E3, 25M11 0367140060App. Schie b er2H90367140064App. Schie b er K2F9, 2G6, 2G7,2G9,2H9, 2G11 0367140070Blatt f e d er2H90367140090Schie b er,re2G6, 2J4 0367140100Fuss 1.1E30367140170Schie b er2F7, 2L7 0367140190Schie b er,li2F8, 2L4 0367140320Schie b er,li2F7, 2K4 0367142070Schie b er2F6, 2J4 0367142340Schie b er,re2F7, 2K7 0367150050La g er b uch s e6G10, 6L10, 8.4D6,8.5C90367150060Schei b e7C90367150070Ge w in d es t ift6F7, 6K6, 7C9 0367150080Zahn r ad6F5, 6K5 0367150093Klaue6G5, 6L6 0367150103Klaue6G5, 6L5 0367150113Stell r ing K8.2H12Klas s e / Class: 767In d ex Aus g a b e/Edi t i o n:03.2007 Tei l e-Nr./Part-No.Be n en n ung/Des.Ta f el/Table Tei l e-Nr./Part-No.Be n en n ung/Des.Tafel/Table0367150120Wel l e9L110367150133Klemm r ing K8.4F70367150150Zahn r ie m en6E11, 6J11 0367150163Zahn r ie m en r ad1B10, 1E11 0367150180Wel l e9L2, 9L8 0367150193Klemm r ing K7D11, 7E4, 7.1E2,8E9, 8F3, 8.2G8,8.4H7, 8.5E7 0367150240De c kel 6.1D2, 6.1D6, 6.1J2,8.2E11, 25.2C5,25.2D11, 0367150270Ke g elst.Fe d er 6.1C3, 6.1C7, 6.1J38.2E12, 20M4,25.2D12 0367150280Schei b e 1.1C9, 7B6, 7B10,7.1B3, 0367150310Grei f er l a g er,re7E100367150320Grei f er l a g er,li7E6, 7.1E3 0367150330La g er d e c kel7C7, 7C9, 7.1D4,8E5, 8E7, 8.2F5,8.4F5, 8.5E9 0367150343Grei f er w el l e K7D6, 7.1D3, 8E5,8E8, 8.2F6 0367150360Bol z en7E10, 7.1C2, 8.2G68D3, 8F8, 8.5D9 0367150380Bol z en7C40367150403Stirn r ad7F6, 7F11, 7.1F3,8G3, 8G9, 8.2J8,8.4K7, 8.5G7 0367150413Stirn r ad8F3, 8F9, 8.2H8,8.4J70367150433An t riebs w el l e7D9, 7D10, 7E6,7.1E3, 8F5, 8F7,8.2G50367150453Zugs t an g e7B4, 7C11, 7.1B2,8C3, 8D9 0367150460Ex z en t er b uch s e9L5, 9M2, 9M7,9M110367150470Schei b e9K2, 9K4, 9K7,9K110367150480Spu l en g eh.Luef t er7.1A20367150490Spu l en g eh.Luef t er7A5, 7A10, 8C3,8.2C8, 8C9 0367150530Spin d el7E10, 7F6, 7.1F3,8F8, 8G5, 8.2J6 0367150540Mut t er7F4, 7F11, 7.1F2,8G3, 8G9, 8.2J8,8.4J7, 8.5G7 0367150550Nip p el9L40367150560Re d u z iers t ueck9M80367150570Oel r ohr9L3, 9L12, 9M9 0367150580De c kel,Re7F6, 7F11, 7.1G3,7G6, 8G5, 8H9,8.2K8, 8.4L7 0367150590Dich t ung8.2K8, 8.5H9 0367150600De c kel li.7G6, 7.1G3, 8H5,8.5H90367150610Grei f er l a g er,re FA8F8, 8.2H6, 8.4H5 0367150620Grei f er l a g er,li FA7E6, 7.1E3, 8F3,8.5F90367150630De c kel8H90367150700Schlauch9F3, 9F6, 9M7 0367150770Buch s e7F6, 7F10, 7.1F3,8G5, 8G8, 8.2J6,8.5D7, 8.4K6 0367150780Schei b e6F11, 6K11 0367150813Stirn r ad7E6, 7E11, 7.1E3,8.5F70367150820Exz. Wel l e K7B6, 7B10, 7.1C3,8D5, 8D8, 8.2D8,8.2E6, 8.4E6,8.5D9 0367150824Ex z en t er w el l e7B11, 7C6, 7.1C3,8D5, 8D9, 8.5C7,8.4E70367150830Bol z en6B4, 7B11, 7.1B2,8C5, 8C9, 8.2D8,8.4D7, 8.5C9 0367150840Pris m a6B4, 7B11, 7.1C2,8C5, 8C9, 8.2D8,8.4E7, 8.5C9 0367150850Fe d er9K6, 9L1, 9L10,9M6,0367150860Fe d er9L60367150884Schlauch9K70367150894Schlauch (2-Nad.)9L60367150900Paszschei b e7B6, 7B10, 7.1B3,8B5, 8C6, 8.2C6,8.4D6, 8.5C9 0367150910Paszschei b e7B6, 7B10, 7.1B3,8C5, 8C8, 8.2D6 0367150920Hal t er9K11, 9L2, 9L8,7.1L3, 8L8, 8L11 0367150930Buch s e6F7, 6K6 0367150940Lauf r ol l e6F7, 6K7 0367150950Kol b en6G7, 6L7 0367150960Wel l e6G7, 6L7 0367150973Oel s chlauch9K3, 9K12, 9L9 0367150980Oel s chlauch9M110367151000Ko e r p er6F12, 6K12 0367151004Zahn r ie m en r ad6F12, 6K12 0367151010Huel s e6G11, 6L11 0367151020Pis t on6G11, 6L11 0367151030Fe d er9L3, 9L9, 9L12 0367151040Fil t er t opf9L1, 9L3, 9L5, 9L8,9L10, 9L12 0367151050Hu e l s e9K2, 9K12, 9L1,9L8, 9M4, 9M10 0367160030Bol z en6D110367160053Wel l e6B10367160064Stell w el l e K1L7, 1.1L9 0367160090Gleits t ein6G8, 6K8 0367190100Bol z en6F9, 6K9 0367160110Keil1K7, 1.1K12 0367160120Druc k fe d er1K7, 1.1K12 0367160130Buch s e6A2, 6A6, 6B4, 6E3,6F4, 6G30367160140Buch s e8E3, 8F3,8F9,8.2H88.4H7, 8.5F7 0367160183Hub e x z en t er6G8, 6L8 0367160200Buch s e1J80367160233Klo b en6C30367160240Bol z en6A40367160253Zugs t an g e6K70367160273Zugs t an g e6F7, 6K8 0367160290Hebel6F9, 6K9 0367160310Bol z en6A6, 6F7, 6D3, 6J7 0367160320Nip p el1F4,1L6,1.1E4, 4J7,4K1, 4M4, 5K1, 5L4,6C3, 6G7,6G10,6L7,6L10, 7E10, 8F8,8.2H6, 8.4H5, 12B4 0367160333Klemm k lo b en1H100367160340He b el1K9Klas s e / Class: 767In d ex Aus g a b e/Edi t i o n:03.2007 Tei l e-Nr./Part-No.Be n en n ung/Des.T a f el/Table Tei l e-Nr./Part-No.Be n en n ung/Des.Tafel/Table0367160344He b el1K90367160350Zugs t an g e1K90367160360Bol z en1K100367160373Klo b en1L90367160380Bolzen1L90367160383Klo b en1L90367160390Buch s e1J100367160400Aus g leichs s tueck1G100367160410Blatt f e d er1H100367160420Ach s e1J80367160430Fe d er h a k en5E3,5E4, 5E9, 5E10 0367160460Stan g e1K100367160474Ga b el1H90367160480Zug f e d er5D3, 5D9 0367160493Fe d er b ue g el5D3, 5D9 0367160523Pol s ter1K11, 20J6 0367160530Rol l e1H90367160563Spin d el1K100367160583Stichst. Griff1J120367160600Ska l a1K110367160633Klemm b ol z en6F40367160640Stop f en1L6, 6B1 0367160660Bol z en5C3, 5C9 0367160680Stift6B1, 6D1, 6F1 0367160690Buch s e1J120367160700An s chlag b lech1M100367160710An s chlag b lech1M100367160720Buchse6A20367160740Gleits t ein6C11, 12B3 0367170750Dis t anz h uel s e1H100367170013Mit n eh m er r ad1C10, 1F11 0367170020Buch s e10B9, 10H9 0367170033Ausloese h e b el10C11, 10J11,10.1D5 0367170040Klemm f e d er10G11, 10.1C5 0367170044Spu l er w el l e K10H11, 10.1C5 0367170060Mes s er10B11, 10H11,10.1D5 0367170070Schei b e10B11, 10H11,10.1C5 0367170083Spu l er r ad K10E9, 10L9, 10.1H3 0367170090Fa d en f u e h r ung10B9,10G11,10.1B5 0367200330Stich p lat t e11K10367210240Un t er m es s er11K2, 20L2 0367232010Na d elst.Rohr2K11, 2F11 0367232030Fa d en o e s e30F20367240040Dis t anz r ol l e11C11, 11M6, 12H5 0367240440Ein s atz11B8, 12G1 0367240453He b el11B9, 12G3 0367240460Wel l e11C8, 12H2 0367240470Schei b e11D8, 12J1 0367240480Schie b er11C9, 12H3 0367240493Zugs t an g e11D9, 12J3 0367240503La g er11C8, 12H1 0367240513Klo b en11C10, 12H4 0367240520La g er p lat t e11C11, 12H4 0367240530Huel s e11A11,11B11,11C11,12G5, 12H5 0367240540Dis t anz b uch s e11A10, 11B11, 12G5 0367240563Ban d einf.Plat t e11A9, 12F3 0367240940Bol z en11B11, 12G30367250010Oel f ang s cha l e20E50367250020Schrau b en d re h er20A30367250030Maul s chlues s el20C20367250044Spu l en a us h e b er 6.1L12, 20K2 0367250050Oel f ang m ul d e20E50367310013Klo b en1L50367310023Zugs t an g e1L60367310030Buch s e1L60367310044Ex z en t er4L80367310103Zugs t an g e4L60367310133Klo b en4H60367310153Stell r ing4B4, 4B7 0367310160Bol z en4J70367310180Schau g las1C3, 1.1C4, 9B2,9B8, 9H3 0367310190Bol z en1H9, 4C1,4C5 0367310203Zugs t an g e1J60367310204He b el1M60367310210Gelenk4D2, 4D6, 4E4,4E8 0367310280Si c he r ungs b lech4D2, 4D4,4D6, 4D8,4E2, 4E4, 4E6, 4E8,12C10367310284Arm w el l e1B90367310330Buch s e1J3, 1K4, 4B4, 4B8,4K3, 5K3 0367310360Stop f en4J7, 4L4, 5L4 0367310410Klemms t ueck4K7, 4L7 0367310830Kol b en25K110367310860Bol z en25J11, 25M10 0367310933Stell r ing4K3,4K5,5K5 0367311010Zugs t an g e25K110367311060Buch s e4K5, 5K5 0367311103La s che4L1, 5L1 0367311130Bol z en4K3, 5K3 0367311150Wel l e4K1, 5K3 0367311163Oel r ohr4H40367311170Bol z en4K10367311193Rah m en4H1, 5H1 0367311210Blech4H2, 5H3 0367311223He b el4J5,5J5 0367311230Dis t anzstueck25L100367311240Ku g el b ol z en4H5, 5H5 0367311260Schlauch25J110367311343Zugs t an g e1L60367311500Oel r ohr11D50367330020Ex z en t er s chei b e11B50367330044Oel v er t ei l er12D40367330053Ku l is s e12B30367330073Klemm b ol z en12B20367330080Buch s e11E3, 12B2, 12C2 0367330093Wel l e12B10367330110Zugs t an g e11D2, 12C2 0367330123Bol z en11D1, 11E3, 12B1,12C20367330133Bol z en12A30367330140Mes s ers t an g e12C10367330150Buch s e12D20367330183Bol z en12A70367330193Klo b en12B60367330203Schalt n o c ken12B60367330213Klin k e12C6Klas s e / Class: 767In d ex Aus g a b e/Edi t i o n:03.2007 Tei l e-Nr./Part-No.Be n en n ung/Des.Ta f el/Table Tei l e-Nr./Part-No.Be n en n ung/Des.Tafel/TableKlas s e / Class: 767In d ex Aus g a b e/Edi t i o n:03.2007 Tei l e-Nr./Part-No.Be n en n ung/Des.T a f el/Table Tei l e-Nr./Part-No.Be n en n ung/Des.Tafel/Table0367330233Hand h e b el12C6 0367330240Zugs t an g e12A3 0367330254Schwenk h e b el K12C6 0367330260Bol z en12B5 0367330270Ar r e t ierschr.12D6 0367330280Schalt h e b el12A5 0367330290La g er b ock12E4 0367330300Bol z en11F3, 12D3 0367330310Rohr12D3 0367330320Dreh f e d er12B7 0367330330Dreh f e d er12D3 0367330350Mut t er12D6 0367330370Schei b e12C6 0367330380Rohr h al t er11D5, 12D3 0367330390Fe d er b lech12B6 0367330400Klo b en12C6 0367330410Zap f enschr.12C6 0367330420Schalt b lech12B6 0367330693La g er a rm11J5 0367330700La g er b ock6D90367330713Hub w el l e6D10 0367330714Hub w el l e K6D10 0367330720Stop f en11H11 0367330730Klemms t ueck11K3 0367330740Bol z en11M5 0367330773La g er11J3, 12B9 0367330780Ober m es s er11L3, 20K2 0367330810Win k el11H3 0367330840Klo b en11J3, 11J4, 12B10 0367330850Bol z en11J3, 12B9 0367330873Schutz b lech20E5 0367330880Dreh f e d er11H7 0367330893Schlauch9D2, 9D7, 9L7 0367330920Schutz b lech12A2 0367331010La g er b ock11E3 0367331023Wel l e11D2 0367331034Ex z en t er K11B5 0367331053Hal t er11L5 0367331063La g er11K4 0367331070Buch s e11K4 0367331090Buch s e11E2 0367331100Druc k fe d er11L4 0367331110Stellschr.11L3 0367331123Fueh r ungs k lo b en11M4 0367331133Hal t er11J4 0367331143Ab d ec k blech11H10 0367331150Ab w ei s er11H8 0367331160Ab w ei s er11L4 0367331173Schutz b lech11G8 0367331180Schlit t en11J3 0367331190La g er b ock11L6 0367331203Klo b en11K5 0367331210Zugs t an g e11K5 0367331223Wel l e11K6 0367331240Ge w in d e b ol z en11K5 0367331254Oel v er t ei l er11C5 0367331260Ab f all r ut s che20E5 0367331344Ex z en t er K12C4 0367331520Klo b en11C3 0367331573Stell r ing11E30367331630Bol z en11C30367331640Bol z en11C30367331693La g er p lat t e12C110367331700Bol z en12C110367331710Buch s e12E20367331720Druc k fe d er12E30367337514Ab s chnei d einr.12F60367350023Buegel V20L5, 25E12, 25L5 0367350040Mes s er t rae g er FA8B7, 8C3, 8.2C6 0367350050Mes s er8B5, 8B7, 20J2 0367350060Klemm f e d er8B3, 8B7, 20J2 0367350070Mes s er8A3, 8B9, 20J2 0367350083Fa d enz.Trae g er V8B3, 8B9, 8.2B8,8.4B80367350103Buch s e V8D3, 8E9, 8.2F8,8.5D70367350113Stell r ing8E1, 8F12, 8.4H11,8.4J11 0367350123He b el K8F10, 8.2H9, 8.4H9 0367350130Zugs t an g e8F10, 8.2J9, 8.4J9 0367350143Klo b en K8G10, 8.2J9, 8.4K9 0367350150Mag n et h al t er8F12, 8.4J11 0367350160He b el8.2H12 0367350163He b el K8F2, 8G10, 8.2K10 0367350170Bol z en8F1, 8G11, 8.2K118.4K11 0367350180Kur v en s chei b e8H5, 8H9 0367350193He b el8E1 8.4K10 0367350200Zugs t an g e8D10367350213Win k el h e b el8E30367350220Bol z en8F50367350230Zugs t an g e8E30367350243Klo b en8H50367350250Mag n et h al t er8H60367350260Hal t er20G60367350270Win k el9C100367350280La s che5L3, 25E10, 25.1F3 0367350290Stichst. He b el25B11, 25.1B4,26F8 0367350294Hebl26E90367350300Zei g er b lech25B11, 25.1B4,26F8 0367350320An s chraub k lo b en25B10, 25.1B2 0367350330Sto e s s el25C12, 25G12,25.1H4,26F1, 27B2,27.1B2 0367330403Klemm k lo b en26F1, 27B2 0367350413He b el27B80367350430La s che27B70367350443Buch s e27A70367350483Klemm r ing27B70367350490Schei b e25G12, 25.1J4,26G1,27C2, 27.1C2 0367350713Win k el9E100367350723Schalt r ing9E11, 10J3 0367360123Lei t ung9C7, 9J7 0367360153Fa d ensp.Mag n et K10E5, 10.2L5 0367360170Hal t er26J10367360183Dop p el l ei t ung27E50367360293Lu e f t ung K10L4, 10.2K10 0367367649FLP 13-227H50367367654Wart. Ein h eit WE327L120367367704Anschl.Tei l e K27M30370221230Druc k fe d er6G7, 6L7。
直驱高速电子曲折缝缝纫机
直驱高速电子曲折缝缝纫机GEM2297D SERIESCOMPUTER-CONTROLLED DIRECT-DRIVE,HIGH-SPEEDZIGZAG STITCH MACHINE零件目录1 1.机壳、外露部件PARTS CONTENTS Frame & Miscellaneous Cover Components2.机头、外装盖板部件Frame & Miscellaneous Cover Components3.上轴、针杆部件Main Shaft & Thread Take-up & Needle Bar Components4.摆针部件Needle Vibrator Components5.压脚提升部件Hand Lifter Components6.送料抬牙部件Feed Mechanism Components7.倒送料部件Feed Mechanism Components8.旋梭驱动轴部件Hook Driving Shaft Components9.下轴部件Lower Shaft Components10.剪线部件Thread Trimmer Mechanism Components11.倒缝、挑线电磁铁部件Automatic Reverse Feed & Thread Feeder Mechanism Components 5 9 11 13 15 17 19 21 23 25 2712.松线电磁铁部件Thread Release Solenoid Components13.拨线电磁铁部件Wiper Mechanism Solenoid Components 14.润滑系统部件Lubrication Components15.油盘部件Under Cover Components16.线架部件Thread Stand Components17.自动抬压脚装置(可供选择)Auto Lifter (on The Side Plate)18.操作盘部件Panel Components19.电气控制箱和开关部件Control Box And Power Switch Components 20.附件部件Accessorie Part Components 29 31 33 35 37 39 41 4322.索引Index 4521.2279D-SR专用部件47 Special Components1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50427.01-01427.01-02423.01-03427.01-03427.01-04427.01-0511-70110620-01501.10-09427.01-0711-40150925-01427.01-0811-60113020-01423.01-24427.01-09427.01-09-01427.01-09-02427.01-09-03423.01-44-11423.01-44-10427.01-09-04427.01-09-05427.01-09-06423.01-44-02427.01-09-07427.01-09-0811-80110710-01427.01-10427.01-1131-14018000-09427.01-1231-09018000-09427.01-131277.01-03427.01-1416-60502522-02423.01-04423.01-1711-60080420-01423.01-1411-10090720-0111-20110850-01423.01-07423.01-0911-40120625-0111-40110925-01423.01-0821-06510110-0123-06405110-09423.01-29423.01-10机头底板面板支撑板垫油毡油毡压簧螺钉11/64-40 L=6大固定夹底板支撑板B螺钉15/64-28 L=9限位螺钉螺母SM11/64-40预张力夹线器组件夹线器组件夹线螺母止动片夹线弹簧夹线板毛毡夹线盘组件夹线螺钉挑线簧螺钉9/64-40 L=5.5夹线座松线钉螺钉11/64-40 L=6.5松线辅钉松线辅钉弹簧O型橡皮圈弹簧销8X20O型橡皮圈排气栓放气盖带轮罩螺栓面板垫挑线割线刀螺钉1/8-44 L=3.8面板线勾螺钉 9/64-40 L=7.2螺钉11/64-40 L=8平盖底座弹簧片螺钉3/16-28 L=6螺钉11/64-40 L=9平盖垫圈6.5X11X1波形垫圈6.4X11X0.3铰链螺钉警告标牌Arm ASM.Bed ASM.Face plate COMPL.Head support a pakingFeltFelt presserScrew 11/64-40 L=6Cord holder, largeBed support plate BScrew 15/64-28 L=9Suspension screwNut 11/64-40Pre-tension controller ASM.Thread tension ASM. AThread tension nutRotation stopperTension springTension disc holderFeltThread tension t COMPL.Thread tension rod COMPL.Thread take-up springScrew 9/64-40 L=5.5Thread tension rod base ASM.Thread release pinScrew 11/64-40 L=6.5Thread release auxiliary pinThread release pin springRubber ringSpring pin 8x20Rubber ringAir-dischargingAir-discharging capPulley coverBoltFace plate packingTake-up thread cutterScrew 1/8-44 L=3.8Balance thread guide bScrew 9/64-40 L=7.2Screw 11/64-40 L=8Balance cover baseBalance cover stopper springScrew 3/16-28 L=6Screw 11/64-40 L=9Balance coverWasher 6.5x11x1Waved washer 6.4x11x0.3Hinge screw D=6.35 H=7.5Attention seal序号图号名称DESCRIPTION数量11111112141111(1)(1)(1)(1)(4)(1)(1)(1)(1)(1)(1)1111111113111117111211111 REF NO.PART NO.NUM51 52 53 54 55 56 57 58 59 60 61 62 63 64423.01-47-01423.01-06427.01-15423.01-22501.01-45423.01-3611-40121025-0111-40121225-01101.01-11427.01-16427.01-17423.01-50423.01-51423.01-52针杆摆动槽挡油板松线窗盖板垫固定夹橡皮塞橡皮塞橡皮塞螺钉3/16-28 L=10螺钉3/16-28 L=12橡皮塞后盖板底板支撑板橡皮塞橡皮塞橡皮塞Arm oil shieldGasketCord holderPlug D=8 L=4.5Rubber plug D=12.5 L=4Driving stopper rubberScrew 3/16-28 L=10Screw 3/16-28 L=12Rubber plugSide plateBed support plateRubber plugRubber plugRubber plug序号图号名称DESCRIPTION数量11114231111111 REF NO.PART NO.NUM1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50427.02-01427.02-02427.02-03427.02-04427.02-0511-40120625-01427.02-06427.02-07423.02-03423.07-1311-10090820-01427.02-08427.02-0912-40300625-0111-80621620-01134.02-0112-40400625-0121-04308090-01427.02-10-01427.02-10-02427.02-10-03427.02-10-04427.02-10-05423.03-01-06427.02-10-07427.02-10-08427.02-10-09427.02-10-10427.02-10-1112-80500512-01427.02-10-12427.02-10-13427.02-10-14423.03-01-1212-80401012-0124-08000000-08427.02-10-15427.02-10-16423.01-131228.08-11423.03-07423.03-07-01423.03-07-02423.03-07-03423.03-07-04423.03-07-05423.02-09427.02-11427.02-11-01427.02-11-02油盘磁铁压板磁铁自攻螺钉油线夹螺钉3/16-28 L=6油管导板油盘垫半月板针板螺钉9/64-40 L=7.5绕线驱动轮绕线驱动轮阻片螺钉M3 L=6螺钉 3/16-32 L=16绕线器组件螺钉垫圈 4.3X8X0.9绕线控制板手绕线器底座扳手轴隔垫凸轮轴梭心压簧绕线轴杠杆绕线凸轮控制杆拉簧轴承螺钉M5 L=5绕线轴承隔垫扭杆弹簧绕线轴曲柄轴用弹性挡圈螺钉 M4 L=10卡簧橡皮轮绕线轮导线柱视油窗绕线器夹线器组件夹线螺母夹线弹簧夹线板夹线柱螺母NUT 11/64-40接地标志安全开关组件安全开关安全开关座Gear box (large) coverMagnet washerMagnetTapping screwLubricating oil wick stopperScrew 3/16-28 L=6Pipe guide plateGear box (large) packingSemilunar plateNeedle plateScrew 9/64-40 L=7.5Btw driving wheel ASM.Bobbin driving wheel bladeScrew M3 L=6Screw 3/16-32 L=16Bobbin winder unitScrewWasher 4.5x10x0.8Btw_leverBtw_baseBtw_lever_shaftBtw_spacerBtw_base_shaftBoobin_springBtw_shaftRbtw_cam_plateBtw_cam_leveBtw_springBtw_bearingScrew M5L=5Btw_bearing_spacerBtw_torsion_springBtw_shaft_baseRetaining ringScrew M4 L=10E-ring 4Btw_wheel_rubberBtw_wheelThread guide barOil sight windowBobbin thread tension ASM.Thread tension nutThread tension springBobbin thread tension discBobbin thread tension rod ASM.Nut 11/64-40Ground markSafety switch ASM.Safety switch ASM.Safety switch base序号图号名称DESCRIPTION数量11111211114(1)(3)321(3)(1)(1)(1)(1)(1)(1)(1)(1)(1)(1)(1)(2)(1)(1)(1)(1)(1)(2)(1)(1)(1)11(1)(1)(1)(2)(1)(1)11(1)(1) REF NO.PART NO.NUM51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77427.02-11-03427.02-11-04427.02-11-0512-40201221-02427.02-11-07427.02-11-08427.02-11-0911-40120925-01427.02-12427.02-13427.02-1431-20024000-09423.01-10424.21-0111-20110850-01423.01-11423.01-2111-70090420-0111-40121025-01427.02-15101.01-1711-00110620-0111-70121020-01134.02-0311-00090620-01427.02-1611-40120625-01开关弹簧安全开关轴安全开关座垫板螺钉 M2 L=12安全开关线组件6P电线接头电线扎带螺钉 3/16-28 L=9小齿轮箱盖小齿轮箱垫小齿轮箱孔塞O型圈警告标牌导线板A螺钉11/64-40 L=8挑线簧防护架限位橡皮螺钉9/64-40 L=3.5螺钉3/16-28 L=10安全标签安装板螺钉11/64-40 L=6螺钉 3/16-28 L=10割线刀螺钉地线组件螺钉3/16-28 L=6Safety switch springSafety switch ASM shaftSafety switch stopper plateScrew M2 L=12Safety switch cord ASM.Housing 6pCable bandScrew 3/16-28 L=9Gear box (small) coverGear box (small) packingGear box (small) capRubber ringAttention sealBalance thread buide aScrew 11/64-40 L=8Spring guardRubber stopperScrew 9/64-40 L=3.5Screw 3/16-28 L=10Safety label 12Ruler stop seatScrew 11/64-40 L=6Screw 3/16-28 L=10Thread cutterScrew 9/64-40L=6Ground wire a ASM.Screw 3/16-28 L=6序号图号名称DESCRIPTION数量(1)(1)(1)(2)(1)(1)(1)211111121111611131211 REF NO.PART NO.NUM1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56427.03-01427.03-02427.03-03427.03-04427.03-0512-80501012-01427.03-06134.03-04423.04-14134.03-1912-80600612-01134.03-0312-80600612-01134.03-03134.03-1811-80160610-0111-60181630-0111-80180710-01427.03-1311-600110820-01427.03-14427.03-15427.03-15-01427.03-15-02423.04-13423.04-2011-10090920-01427.03-16423.04-3511-60090920-01423.04-0611-60080620-01427.03-1711-80151210-01427.03-18427.03-18-01427.03-18-02427.03-18-03427.03-18-0411-80120712-01427.03-18-05427.03-18-06427.03-1943-10250000-00427.03-21427.03-22427.03-23427.03-24427.03-2512-80601222-0121-07205100-0114-60603210-0216-60502522-0212-90501723-0222-05000000-08427.03-26主轴针杆曲柄主轴同步轮组件挑线曲柄手轮螺钉 M=5 L=10主电机联轴器组件同步带中轴承NTN 6304Z螺钉M=6 L=6主轴轴承套(中)螺钉M=6 L=6轴承挡圈前轴承 NTN 6204LB螺钉1/4-40 L=6螺钉9/32-28 L=16螺钉9/32-28 L=7针杆连接柱导轨螺钉 11/64-40 L=8.5曲柄连杆导轨曲柄连杆组件轴承TNT 608LB曲柄连杆挑线平衡盘组件旋转挑线杆螺钉9/64-40 L=8.6针杆针杆连接柱螺钉 9/64-40 L=8.5针杆过线勾螺钉1/8-44 L=6导向销B螺钉15/64-28 L=12针杆摆动组件针杆摆动架针杆摆动架轴针杆摆动架导向销针杆套螺钉3/16-28 L=7针杆摆动架毡弹簧销导向销A油线针杆摆动架轴前套针杆摆动架轴后套轴用挡圈调整套阻力弹簧螺钉M=6 L=12垫圈螺母M6螺栓螺栓弹簧垫圈机针DPX5 ﹟10Upper shaftCounter weightUpper shaft sprocketNeedle rod crankHand wheel ASM.Screw M=5 L=10Ac servo motorCouplingTiming beltBearing ntn 6304zScrew M=6 L=8Main shaft bearing supportScrew M=6 L=8Bearing holderBearing ntn 6204lbScrew 1/4-40 L=6Screw 9/32-28 L=16Screw 9/32-28 L=7Needle rod holder guideScrew 11/64-40 L=8.5Needle rod crank rod guideNeedle rod crank rod ASM.BearingNeedle rod crank rodTake-up counterweight ASM.Balance vScrew 9/64-40 L=8.6Needle barNeedle bar connectionScrew 9/64-40 L=8.5Thread rack, rightScrew 1/8-44 L=6Support base guide pin BScrew 15/64-28 L=12Needle rod support base ASM.Needle rod support baseNeedle rod support base shaftSupport base guide shaftNeedle rod metalScrew 3/16-28 L=7Needle rod support base feltSpring pinSupport base guide pin AOil wickSupport base shaft front metalSupport base shaft rear metalThrust bushMetal bSpringScrew M=6 L=12Plain washerNut M6BoltBoltWasherNeedle DPX5 #10序号图号名称DESCRIPTION数量1111121111614112111411(2)(1)11311111111(1)(1)(1)(2)(1)(1)(1)10.15122111113111 REF NO.PART NO.NUM1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32427.04-01427.04-02427.04-03427.04-04427.04-0521-05205080-01427.04-06427.04-0711-00110620-0111-80090610-01427.04-08427.04-0911-70110520-0111-40121225-01427.04-10427.04-11427.04-1212-40300625-01427.04-1314-60403020-02427.04-1412-60401022-0121-04212090-0212-60401422-0111-10151320-0111-60150720-01427.04-1511-40121225-0111-40121625-0112-40501125-0112-40250821-0212-80500612-01摆针马达安装底板马达联接器联接轴A联接杠杆组件电线扎带垫圈5.2X9.5X0.6联接轴A联接轴套螺钉11/64-40 L=6.5螺钉9/64-40 L=5.5摆动架联接座传感器接板螺钉11/64-40 L=5螺钉3/16-28 L=12传感器传感器垫片传感器安装板螺钉线夹螺母M4X0.7摆针马达螺钉M4 L=10垫圈螺钉M4 L=14螺钉螺钉15/64-28 L=7摆针盖板螺钉3/16-28 L=12电线夹长螺钉螺钉M5 L=11.5螺钉M2.5 L=8螺钉M5 L=6Needle vibrator unit basisMotor linkJunction shaft AShaft connection linkCable bandWasher 5.2x9.5x0.6Junction shaft AJunction shaft collerScrew 11/64-40 L=6.5Screw 9/64-40 L=5.5Support base shaft connectionSensor slitScrew 11/64-40 L=5Screw 3/16-28 L=14Zero sensor a ASM.Sensor fitting plateScrewCord clampNut M4x0.7Pulse motorScrew M4 L=10WasherScrew M4 L=14ScrewScrew 15/64-28 L=7Needle vibrator unit coverScrew 3/16-28 L=12Screw 3/16 L=16Screw M5 L=11.5Screw M2.6 L=8Screw M5 L=6序号图号名称DESCRIPTION数量11112111211111111211132113131111 REF NO.PART NO.NUM1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34427.05-01427.05-02427.05-03427.05-04134.04-03427.05-05423.08-33423.08-32423.08-14101.04-02424.21-03423.08-08423.08-09423.08-12423.08-11423.08-02423.08-1711-30091020-01423.08-291211.04-07423.08-06423.08-16423.08-2013-60623020-0111-80150510-0124-06000000-0831-03618000-09427.05-06423.08-27423.08-23427.05-0711-60090920-0111-60111120-0111-80151750-01抬压脚拉杆抬压脚后杠杆抬压脚后杠杆弹簧抬压脚顶杆调压螺钉压杆下套压脚升降板抬压脚凸轮组件压脚扳手调压螺母压脚组件压杆压杆导架调压弹簧压脚导柱抬压脚前杠杆铰链销压脚扳手固定螺钉卡簧抬压脚后杠杆螺钉调节螺柱铰链螺钉密封圈抬压脚后杠杆铰链螺钉螺母3/16-32锁紧螺钉15/64-28 L=4.7卡簧O型橡皮圈铰链螺钉D=6.0 H=3.4铰链螺钉D=6.35 H=2.7铰链螺钉D=6.35 H=3铰链螺钉螺钉 9/64-40 L=8.5螺钉 11/64-40 L=10.5压脚浮动螺钉15/64-28 L=17Knee lifting side rod linkKnee lifting linkKnee lifting link springKnee lifting junction rodPresser spring regulatorBushingLifting platePresser lifter cam COMPL.Hand lifterPresser spring regulator nutPresser foot ASM.Presser barPresser bar holderPresser spring TPresser guide barLifting lever linkHinge pinScrewSnap ringConnecting rod hinge screwSwivelLifting lever gasketKnee lifting link step-screwNut 3/16-32Screw 15/64-28 L=4.7E-ring 6Rubber ringHinge screw D=6.0 H=3.4Hinge screw D=6.35 H=2.7Hinge screw D=6.35 H=3Hinge screwScrew 9/64-40 L=8.5Screw 11/64-40 L=10.5Screw 15/64-28 L=17序号图号名称DESCRIPTION数量1111111111111111111111111111111111 REF NO.PART NO.NUM1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59427.06-01427.06-02427.06-03427.06-04427.06-05427.06-06427.06-071197.05-1111-80110412-01427.06-09423.10-30427.06-1011-600110820-0132-24060350-09427.06-1111-60121420-0124-05000000-08427.06-12423.09-3713-60123020-0111-60110820-01427.06-1311-80110412-01427.06-14134.05-1613-60153020-01427.06-1611-80160612-01427.06-17427.06-18423.10-36304.08-08427.06-1911-80160810-0111-60080620-01427.06-20427.06-2111-60121620-01423.10-52423.10-21423.10-2613-60184020-0132-14170220-0911-40150925-01423.10-11423.10-0921-07310122-03423.10-12423.10-03427.06-2211-60121420-0124-03000000-0811-40120925-0111-60121420-01423.07-1711-60580722-01427.06-2332-09470190-09427.06-24拉簧送料轴送料限位板送料限位板拉力弹簧架倒送料调节杆送料调节器送布轴挡圈挡圈螺钉送料调节器限位板螺钉11/64-40 L=7垫板螺钉11/64-40 L=8.5送料调节器油封送料可变曲柄组件(左)螺钉3/16-28 L=14卡簧5送料调节板铰链螺钉D=6 H=3.2螺母3/16-28螺钉11/64-40 L=8.5挡圈螺钉 11/64-40 L=4.5送料可变轴送料可变轴杠杆销螺母15/64-28送料可变曲柄(右)螺钉1/4-40 L=6送料可变轴后套送料偏心凸轮盖板送布凸轮连杆滚针轴承送料偏心凸轮螺钉1/4-40 L=8螺钉1/8-44 L=6送料偏心凸轮连杆抬牙轴曲柄抬牙轴曲柄螺钉送料滑块送料滑块销铰链螺钉D=9 H=7螺母9/32-28油封螺钉15/64-28 L=9牙架曲柄牙架销垫片抬牙连杆铰链轴牙架抬牙连杆组件螺钉3/16-28 L=14卡簧3螺钉3/16-28 L=9螺钉3/16-28 L=14送料牙螺钉1/8-40 L=7送料可变轴前套送料可变轴油封送料轴套Feed adjusting springHorizontal feed shaftRegulate plateRegulate plateFeed spring rackFeed reversal linkFeed adjusting AThrust collar D=14.72 W=7Screw 11/64-40 L=4Feed adjusting presserScrew 11/64-40 L=7Plate AScrew 11/64-40 L=8.5Feed adjusting oil sealFeed change arm a ASM.Screw 3/16-28 L=14E-ringFeed adjusting armHinge screw D=6 H=3.2Nut 3/16-28Screw 11/64-40 L=8.5Thrust collarScrew 11/64-40 L=4.5Feed change shaftFeed changing shaft arm B pinNut 15/64-28Feed change arm BScrew 1/4-40 L=6Metal,BHorizontal feed cam coverHorizontal feed rodNeedle bearingHorizontal feed camScrew 1/4-40 L=8Screw 1/8-44 L=6Horizontal feed junction rodFeed rocker shaft crankScrew. 3/16-28Feed driving rocker blockPinHinge screw D=9 H=7Nut 9/32-28Oil sealScrew 15/64-28 L=9Feed rockerFeed base shaftSpacerVertical feed link shaft DFeed baseVertical feed linkScrew 3/16-28 L=14E-ring 3Screw 3/16-28 L=9Screw 3/16-28 L=14Feed dogScrew 1/8-40 L=7Metal,AFeed changing shaft oil sealFeed rocker shaft metal序号图号名称DESCRIPTION数量1111111241124111111121212211111112211212213112111112212111 REF NO.PART NO.NUM1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27427.07-01427.07-02427.07-03427.07-04427.07-05427.07-06427.07-07427.07-08427.07-09427.07-14427.07-1011-60121420-01134.05-21134.05-22134.05-23134.05-2411-60121420-01427.07-1111-60121420-01109.01-18427.07-1211-80150810-0111-60121820-0111-70121820-0121-16515230-01427.07-1311-10110821-01送料调节轴轴套调节螺杆套送料调节连杆调节螺杆送料调节座调节螺杆底板弹簧销3X12微调控制标盘微调螺杆套针距标盘微调止动器螺钉3/16-28 L=14倒送料扳手倒送料轴倒送料轴轴套倒送料轴曲柄螺钉3/16-28 L=14送料调节轴螺钉3/16-28 L=14倒送料扳手限位器弹簧螺钉15/64 L=8螺钉3/16-28 L=18螺钉3/16-28 L=18垫圈复位弹簧螺钉11/64-40 L=8.3Feed adjusting shaft metalFeed adjusting shaftFeed adjusting rodFeed adjusting screwFeed blind controllerFeed adjusting baseSpring pin 3x12Condens dialCondens adjusting shaftFeed dialCondens stopperScrew 3/16-28 L=14Feed leverFeed lever shaftFeed lever shaft metalFeed lever arm ASM.Screw 3/16-28 L=14Feed adjusting shaftScrew 3/16-28 L=14Reverse feed lever stopperSpringScrew 15/64 L=8Screw 3/16-28 L=18Screw 3/16-28 L=18WasherFeed dial springScrew 11/64-40 L=8.3序号图号名称DESCRIPTION数量111212211111111111111212324 REF NO.PART NO.NUM1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34427.08-01427.08-02427.08-03427.08-04427.08-05427.08-06427.08-07427.08-0832-12035180-0932-08040140-0932-08070180-09427.08-09427.08-10423.11-09423.11-20101.05-09423.11-3131-03508000-0931-04818000-0911-40110925-0111-80110510-0111-80160810-01427.08-11427.08-11-01427.08-11-0231-17518000-0931-06718000-09427.08-12427.08-13427.08-14101.01-1211-80111250-01423.11-33423.11-08旋梭轴前套轴承6901Z轴承套旋梭驱动轴后套旋梭轴旋梭驱动轴驱动齿轮油封挡圈油封旋梭轴油封旋梭驱动轴油封梭芯套组件旋梭组件梭心旋梭定位勾下轴限油芯油量调节销O型橡皮圈O型橡皮圈螺钉11/64-40 L=9螺钉11/64-40 L=4.5螺钉1/4-40 L=8柱塞泵组件柱塞泵铜塞O型橡皮圈O型橡皮圈柱塞螺钉柱塞弹簧柱塞橡皮塞螺钉11/64-40 L=12.0旋梭驱动伞齿轮旋梭伞齿轮Hook shaft front metalHook shaft bearing ASM.Hook shaft bearing bushingHook driving shaft rear metalHook shaftHook driving shaftHook driving gear (small)Oil seal collarHook gear box oil sealHook shaft oil sealHook driving shaft oil sealBobbin case ASM.Hook COMPL.VBobbin SInner hook stopperOil wickSet screwRubber ringRubber ringScrew 11/64-40 L=9Screw 11/64-40 L=4.5Screw 1/4-40 L=8Rump metal ASM.Pump metalNeedle cooler plug capRubber ringRubber ringPlunger screwPlunger springPlungerRubber plugScrew 11/64-40 L=12.0Gear ASM. LargeMitre gear small序号图号名称DESCRIPTION数量12211112222111111111461(1)(7)133331111 REF NO.PART NO.NUM1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20427.09-01427.09-02427.09-03427.09-04427.09-05427.09-06427.09-07427.09-08427.09-09427.09-10427.09-1111-00160720-01427.06-1311-80110510-0132-10080260-0932-09740180-09427.09-1311-80110710-0111-80160810-0112-80600812-01下轴前套下轴中套下轴中轴承NSK 6002Z中轴承套下轴后套下轴后轴承NSK 6202Z后轴承套下轴旋梭驱动大齿轮下轴同步轮剪线凸轮螺钉1/4-40 L=7挡圈挡圈螺钉油封油封滚针轴承螺钉11/64-40 L=6.5螺钉1/4-40 L=8螺钉M6 L=8Lower shaft front bearing busLower shaft inner metalLower shaft inner bearingInner bearing bushingLower shaft rear bushLower shaft rear bearingRear bearing bushingLower shaftHook driving gear (large)Lower shaft sprocketThread trimmer camScrew 1/4-40 L=7Thrust collar ASM.Oil sealOil sealNeedle bearingScrew 11/64-40 L=6.5Screw 1/4-40 L=8Screw M6 L=8序号图号名称DESCRIPTION数量11111111111412222222 REF NO.PART NO.NUM1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50427.10-01424.17-01-02424.17-01-07427.10-02427.10-03424.17-01-20424.17-01-21424.17-01-22424.17-01-03427.10-05424.17-04424.17-07424.17-01-05424.17-01-08424.17-11424.17-01-09424.17-05424.17-02424.17-02-01424.17-02-02424.17-02-03424.17-02-04424.17-02-05424.17-02-06424.17-02-07424.17-02-08424.17-02-0911-70090620-01424.17-02-14424.17-02-10424.17-02-12424.17-02-15424.17-02-16427.10-06427.10-0713-60153020-0121-06210132-0314-60302420-0224-040000000-0824-05000000-0824-06000000-08424.17-01-11424.17-12424.17-01-1311-20110850-0111-10111220-0111-40110925-0111-40150925-0111-70090620-01427.10-08支撑板组件离合器组件离合器复位弹簧动刀复位弹簧动刀连杆传动刀臂组件滚轮柱摇臂支架滚轮柱摇臂轴离合器连杆剪线电磁铁动刀铰链螺钉铰链螺套传动臂限位器滚轮柱复位弹叉形连杆滚轮柱摇臂固定板切线刀组件推扳刀座传动刀定刀右刀塞左刀塞弹簧油毡油毛夹螺钉9/64-40 L=6螺钉9/64-40 L=5螺钉3/32-56 L=3弹簧垫圈垫圈垫圈连杆轴橡皮保护套螺母15/64-28垫圈螺母M3卡簧卡簧卡簧铰链螺钉D=6 H=2.9铰链螺钉D=7.94 H=15螺钉M4X0.7 L=6螺钉11/64-40 L=8.5螺钉11/64-40 L=12螺钉11/64-40 L=9螺钉15/64-28 L=9螺钉9/64-40 L=6保护套Base plate ASM.Clutch plate ASM.Clutch return springKnife return springMoving knife linkKnife driving arm ASM.Roller arm seatRoller fulcrum shaftClutch linkThread trimmer solenoidMoving knife link pinMoving knife link baseDriving arm stopperRoller return springFork knife ASM.Roller arm ASM.Fixed plateKnife unitSliding plateKnife baseDriving knife ASM.Fixed knifeKnife stopper,rightKnife stopper,leftSpringFeltClamp plateScrew 9/64-40 L=6Screw 9/64-40 L=5Screw 3/32-56 L=3Locating spring washerSpring washer M2.6Washer B T=0.4Clutch link pinOil protecting rubberNut 15/64-28WasherNut M3E-ring 4E-ring 5E-ring 6Hinge screw D=6 H=2.9Hinge screw D=7.94 H=15Screw M4x0.7 L=6Screw 11/64-40 L=8.5Screw 11/64-40 L=9.5Screw 11/64-40 L=9Screw 15/64-28 L=9Screw 9/64-40 L=6Oil protecting rubber序号图号名称DESCRIPTION数量111111111111111111(1)(1)(1)(1)(1)(1)(1)(1)(1)(2)(2)(2)(1)(1)(1)12212212113112211 REF NO.PART NO.NUM1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25427.11-01427.11-02427.11-03427.11-04427.11-0511-40150925-01427.11-06427.11-06-0111-60110720-01427.11-06-02427.11-06-03427.11-06-04427.11-06-0521-17030300-0224-12000000-08427.11-06-0613-60113020-01427.11-07427.11-08501.05-04427.11-08-02427.11-09427.11-1011-80110412-0111-80151210-01自动倒送料连杆自动倒送料臂铰链螺钉D=6 H=4.5铰链螺钉D=9.53 H=15电磁铁安装板螺栓螺钉15/64-28 L=9倒缝电磁铁组件电磁铁安装板螺钉11/64-40 L=7倒缝电磁铁注意标签倒缝电磁铁活塞橡皮垫圈垫圈17X30X3卡簧链接销插针螺母11/64-40电磁铁铰链销挑线电磁铁组件挡油盖挑线电磁铁小组件拨线器座拨线器螺钉11/64-40 L=4螺钉15/64-28 L=12Automatic reverse feed linkAutomatic reverse feed armHinge screw D=6 H=4.5Hinge screw D=9.53 H=15Solenoid base studScrew 15/65-28 L=9Solenoid base ASM.Reverse feed solenoid baseScrew 11/64-40 L=7Reverse feed solenoidAttention seal 2(3.15)Reverse feed solenoid plungerRubber plungerWasher 17x30x3E-ring 12Pin contactNut 11/64-40Plunger arm pinFeeder solenoid ASM.Feeder wire fitting baseFeeder wireScrew 11/64-40 L=4Screw 15/64-28 L=12序号图号名称DESCRIPTION数量1121221(1)(3)(1)(1)(1)(1)(1)(1)(2)2(1)1(1)(1)1131 REF NO.PART NO.NUM1 2 3 4 5 6 7 8 9 10 11 13 14 15 16 17 18 19 20 21 22427.12-01427.12-02427.02-11-09427.12-02-01427.12-02-02427.12-02-03427.12-02-04427.12-02-05427.12-02-0611-60110720-0111-40110525-01427.12-04427.12-05424.17-20-02427.12-06427.12-0714-60403020-0214-60302420-0211-40121025-01427.12-08427.02-11-09开关按装板倒缝开关组件电线扎带倒缝开关安装垫板倒缝开关底板倒缝电线组件倒缝开关盒倒缝开关倒缝开关座螺钉11/64-40 L=7螺钉11/64-40 L=5按钮电线组件松线电磁铁组件松线架弹簧销3X18缓冲垫圈螺母M4X0.7螺母M3螺钉3/16-28 L=1012P电线接头电线扎带Manual switch baseTouch back switch base ASM.Cable bandReverse feed switch base guideTouch back switch baseReverse feed cord ASM.Manual switch base ASM. AReverse feed switch shaftReverse feed switch supportScrew 11/64-40 L=7Screw 11/64-40 L=5Swled cable a ASM.Thread release solenoid ASM.Thread release push plateSpring pin 3x18Frame side cover gasketNut M4x0.7Nut M3Screw 3/16-28 L=10Housing 12PCable band序号图号名称DESCRIPTION数量11(1)(1)(1)(1)(1)(1)(1)(1)(3)1111212411 REF NO.PART NO.NUM。
兄弟LZB855曲折缝缝纫机的针定位与调整
兄弟LZ2-B855曲折缝缝纫机的针定位与调整中外缝制设备疑问3：我是一名维修工，从事维修工作时间不是很长，请问兄弟LZ2-B855曲折缝缝纫机的针定位应该是多少，怎样调整？答：兄弟LZ2-B855曲折缝缝纫机的针定位应该满足下面两个条件。
（1）将机针摆幅调到0位，当机针由下死点提升3.5mm左右时，旋梭尖与机针中心线重合，同时梭尖距机针凹缺平面距离应为0～0.05mm。
（2）将机针摆幅调到最大（8mm），当针杆处于左死点位置、旋梭尖与机针中心线重合时，梭尖距机针孔上缘距离应为0.2～0.5mm。
笔者在这里提供两种调试方法：其一是根据厂家提供的定规进行调整；其二是在没有定规条件下进行的调整。
1 使用定规1．1 针杆高度的调整针杆⑦位于最低位置时，辅助针板④的最高点与针杆⑦的最低点距离应为定规⑧的高度（图1）。
图1（1）拆下压脚①、针板⑤、辅助针板④、送布牙⑥及垫片③。
（2）将辅助针板④放在针板安装面上。
（3）转动手轮，使针杆⑦位于最低位置。
（4）旋松螺钉②。
（5）将定规⑧放在辅助针板④的表面，上下移动针杆⑦，使针杆⑦端面落在定规⑧上。
[注意] 针板⑤与辅助针板④的厚度是不同的，调整时一定要使用辅助针板④。
（6）拧紧螺钉②。
（7）重新装回压脚①、针板⑤、辅助针板④、送布牙⑥及垫片③。
1．2 机针与旋梭同步的调整（图2）图2（1）接通电源。
（2）按下TEST（测试）键②，TEST指示灯①点亮（不要踩下踏板启动设备，以确保测试时的安全）。
（3）将机针摆幅调到0位。
（4）拆下图1中压脚①、针板⑤、辅助针板④、送布牙⑥及垫片③。
（5）如图2所示，转动手轮，使针杆③从最低位置提起，当旋梭⑥尖端与机针中心线重合时，梭尖距机针凹缺平面距离应为0～0.05mm。
如果达不到此要求，则旋松旋梭的2个固定螺钉⑦，调整旋梭轴向位置来达到此要求。
（6）将机针摆幅调到最大（8mm）。
（7）转动手轮，使针杆③处于左极限位置，当旋梭⑥尖端与机针中心线重合时，梭尖距机针孔上缘距离应为0.2～0.5mm。
Ultrasuede 缝纫手册说明书
Ultrasuede® | Sewing Manual | ContentsHandling of fabrics rolls ........................ 1.00Marking (stenciling)................................. 2.00Spreading .................................................. 3.00Cutting ........................................................ 4.00Interlining ................................................... 5.00Sewing .......................................................... 6.00Ironing and finishing press .................... 7.00Care Label ..................................................8.00 This manual may not be copied or reproduced without permission.Ultrasuede® registered trademarks of Toray Industries.Ultrasuede® is a delicate material. Please store it in an environment with appropriate temperature, humidity and physical storage conditions.Handling of fabrics rolls2. If the fabric gets stained during handling, remove the stains as soon aspossible so as not to damage the fabric, and then brush the fabric lightly with a lint brush.3. If moire-like wrinkles appear on the inner roll (tube core) when thefabric is unfolded, they can be removed with gentle steaming.1. When storing fabrics rolls, keep in a cool, well-ventilated area out ofdirect sunlight. To prevent excessive load from being applied to the fabric rolls, store it on shelves rather than stacking it in large volumes.4. Wrap the remaining fabric rolls after cutting and store it as describedas in "1" above.5. The surface of Ultrasuede® is made of brushed fibers with alengthwise nap. When checking the color of the fabric, be sure that the length is configured along the lengthwise nap. The fabric hue will appear di erent based on the direction of the nap and the angle ofincident light. Note that any observed di erences will not be due to di erences in the color of the fabric. 1.00Ultrasuede® | Sewing Manual | Handling of fabrics rollsProper storage Di erences in appearance due to di erences in the direction of napMark in one direction, paying attention to the direction of the nap.Marking (stenciling)2. The finish will be glossy in the direction of the nap, while it will have a deeper color against the nap.3. Please apply the stencil on a marking sheet.1. Marking (stenciling) should be done in one direction as the nap is directional. *Do not rotate the stencil.Spread the fabric in one direction, paying attention to the direction of the nap.Spreading2. Place a sheet of paper below the bottom layer of fabric and lay the fabric on top. This will prevent misalignment and ensure accurate cutting of the layers in subsequent processes.3. The maximum fabric stack height should be 7 to 8 cm.1. The color and appearance of each part will di er when the fabric is folded or spread as the nap is directional.1. Rotary cutter is recommended.2. Place a sheet of paper below the bottom layer of fabric to prevent misalignment.Single sheet cutting1. The most accurate way to cut is with a CAM/automatic cutter, but it is also possible to make a rough cut with a vertical blade cutter then an accurate cut with a band knife (wavy blade).2. The notch mark is preferred to be around 3mm.3. There is no need to use a overlock sewing machine.Overlapping cutting (vertical blade cutting machine, band knife cutting machine, CAM/automatic cutting machine, etc.)Cut out the parts accurately to avoid problems in the subsequent sewing and finishing processes.CuttingUltrasuede® is sensitive to heat. In order not to damage the surface quality and texture, please use the appropriate temperature, pressure and time when interlining fabric.Interlining1.Type of interlining: Woven, knitted, and non-woven interlining can all be used. However, please note the following points.(1) We recommend the use of interlining that can be bonded at low temperatures(120°C or lower) to obtain su cient adhesive strength.(2) Select an interlining that has adhesive strength, washing resistance and that does nota ect shape retention.(3) Make sure that there is no shrinkage or peeling when the interlining is worn or washed.3. Adhesion conditions: The following are the reference setting conditions for low-temperature adhesive interlining.(1) Bonding temperature: 120°C(2) Pressure: Machine pressure 2–3 kg (actual pressure 150–300 g/cm2)(3) Preheating time: 5–6 seconds(4) Automatic pressurization time: 8–10 seconds(5) Cooling time: 6–8 seconds2. Adhesion press: Reliant (roller) type press, flat press, etc.*The conditions may vary slightly depending on the model, interlining, etc.Please make adjustments accordingly.1.Sewing machine adjustmentThe following are reference setting conditions for sewing machines. (1) Needle plate: Use a Teflon-coated variety.(2) Clamp: Use a Teflon clamp or ring clamp.(3) Other measures: To decrease the friction of the needle plate, we recommend that you apply paper gummed tape, etc., that has a smooth and slippery surface (low adhesive type) to the needle plate and table area of the sewing machine.*The conditions may very slightly depending on the machine model, etc. Please make adjustments accordingly.Since Ultrasuede® does not slide across other layers easily when sewing, there is a tendency for misalignment to occur between the upper and lower fabrics. Please adjust the sewing machine appropriately and beSewingSewingSince Ultrasuede® does not slide across other layers easily when sewing, there isa tendency for misalignment to occur between the upper and lower fabrics.Please adjust the sewing machine appropriately and be careful during handling.2. Sewing(1) The needle holes are somewhat visible, so it is important to finish sewing in one sittingand avoid re-sewing.(2) Note that since the fabric is stretch resistant and relatively inflexible, it is di cultto perform shirring and similar actions.(3) In order to finish the sleeves neatly, use a running stitch, iron them into shape, andattach the sleeves.Ultrasuede® | Sewing Manual | Ironing and finishing press Ultrasuede® is very sensitive to heat. In order not to damage the surface quality and texture, please use the appropriate temperature, pressure and time when ironing and finishing.Ironing and finishing press 7.002. The following are the reference settingconditions for finishing press. (1) Finishing press temperature: 100–105ºC (2) Steam pressure: 2–3 kg/cm2(3) Pressing pressure: 50–150 g/cm2(4) Time: 3–5 seconds for steaming, 5–7 seconds for vacuuming(5) Press pad: soft and elastic(6) Press cover: knitted fabric or raised fabric, such as towels, with no visible structure*The conditions may vary slightly depending on the machine model, etc., so please adjust accordingly. Use a three-dimensional (body) press if possible.1. Ironing (1) Ironing machine: Steam iron.(2) Ironing cover: Teflon ironing covers are recommended.(3) Ironing Board: Vacuum ironing boards are recommended.(4) Temperature setting: 120°C or lower.(5) Prevention of press marks and impressions: Use an ironing cover or cloth. Special fiber cloths are particularly e ective in preventing press marks.30Ultrasuede® | Sewing Manual | Care Label Machine-washable. Wash using cold water on delicate cycle with similar colors. Use mild laundry detergent. Do not use bleach. Ultrasuede® fabric must not be washed together with other items. Use a mesh laundry bag for washing Ultrasuede® items. color migration may occur when dark fabrics are washed together with white and light-colored fabrics. Set your washing machine to its Dry Course or Dry Program mode. (If these modes are not available on the washing machine, keep the spin-dry mode within 1 minute) Do not tumble-dry. Hang out to dry immediately after spin-drying (within 1 minute). Lightly wring dry if washed by hand. Line dry. Can be steam ironed on low setting using cloth to press down. Can be dry cleaned with conventional dry cleaning methods. Lightly brush after drying if Ultrasuede’s nap alignment causes concern.Care label 8.00*When handling Ultrasuede®, please give priority to the "Care Label" displayed on the product,as these relate to the secondary materials used.。