盐城师范学院外文资料翻译格式
外文资料与中文翻译
外文资料及中文翻译
作者姓名
专业
指导教师姓名
专业技术职务
外文资料(黑体、四号、加粗)
An Effective Performance Management Tools（Times New Roman四
号，加粗）
RobertS•Kaplan（英文要有作者）
（中英文之间空两行）
中文译文(黑体、四号、加粗)
一种有效的绩效管理工具(黑体、四号、加粗)
外文资料及中文译文：“外文资料”要尽可能与所做课题紧密联系，严禁抄袭有中文译本的外文资料。
可用正文采用小四号Times New Roman字体。
“中文译文”四个字用四号、黑体、加黑、居中。
内容一般不少于3000汉字，采用小四号宋体，行距1.25倍。
外文资料及中文译文要求单独成册，外文资料在前，中文译文在后。
页码居右。
1。
毕业设计(论文)外文文献翻译要求
毕业设计(论文)外文文献翻译要求
根据《普通高等学校本科毕业设计(论文)指导》的内容，特对外文文献翻译提出以下要求：
一、翻译的外文文献一般为1~2篇,外文字符要求不少于1．5万（或翻译成中文后至少在3０00字以上）。
二、翻译的外文文献应主要选自学术期刊、学术会议的文章、有关著作及其他相关材料,应与毕业论文(设计)主题相关，并作为外文参考文献列入毕业论文(设计）的参考文献。
并在每篇中文译文首页用“脚注”形式注明原文作者及出处,中文译文后应附外文原文。
三、中文译文的基本撰写格式为题目采用小三号黑体字居中打印,正文采用宋体小四号字,行间距一般为固定值20磅,标准字符间距。
页边距为左3cm,右2.５cm,上下各2．5cm,页面统一采用A４纸。
四、封面格式由学校统一制作(注：封面上的“翻译题目”指中文译文的题目，附件１为一篇外文翻译的封面格式,附件二为两篇外文翻译的封面格式），若有两篇外文文献,请按“封面、译文一、外文原文一、译文二、外文原文二”的顺序统一装订。
教务处
2006年2月27日杭州电子科技大学
毕业设计（论文）外文文献翻译
毕业设计（论文）题目
翻译题目
学院
专业
姓名
班级
学号
指导教师
杭州电子科技大学
毕业设计(论文)外文文献翻译毕业设计(论文)题目
翻译(1）题目
翻译(2）题目
学院专业姓名班级学号指导教师。
3外文翻译模板格式及要求
杭州电子科技大学毕业论文外文文献翻译要求根据《普通高等学校本科毕业设计（论文）指导》的内容，特对外文文献翻译提出以下要求：一、翻译的外文文献可以是一篇，也可以是两篇，但总字符要求不少于1.5万（或翻译成中文后至少在3000字以上）。
二、翻译的外文文献应主要选自学术期刊、学术会议的文章、有关著作及其他相关材料，应与毕业论文（设计）主题相关，并作为外文参考文献列入毕业论文（设计）的参考文献。
并在每篇中文译文首页用“脚注”形式注明原文作者及出处，中文译文后应附外文原文。
脚注的方法：插入----引用---脚注和尾注三、中文译文的基本撰写格式为：1.题目:采用小三号、黑体字、居中打印；2.正文:采用小四号、宋体字，行间距为固定值20磅，标准字符间距。
页边距为左3cm，右2.5cm，上下各2.5cm，页面统一采用A4纸。
英文原文如为word文档，请用罗马字体排版，段前空两格。
从正文开始编写页码，页码居中。
四、封面格式由学校统一制作（注：封面上的“翻译题目”指中文译文的题目），填充内容为加粗小三号楷体_GB2312，并按“封面、译文一、外文原文一、译文二、外文原文二、考核表”的顺序统一装订。
五、忌自行更改表格样式，学号请写完整。
封面和考核表均为一页纸张，勿换行换页。
毕业论文外文文献翻译毕业设计（论文）题目Xxx翻译（1）题目指翻译后的中文译文的题目翻译（2）题目指翻译后的中文译文的题目学院会计学院（以本模板为准）专业会计学（以本模板为准）姓名XXXXXX（以本模板为准）班级XX020811（以本模板为准）学号XX023101（以本模板为准）指导教师XXXXXX（以本模板为准）外文翻译考核表。
本科毕业设计(论文)、外文资料翻译格式的说明
xx学院关于2017届
本科毕业设计（论文）、外文资料翻译格式的说明
一、毕业设计（论文）格式
按照西南交通大学本科毕业设计（论文）撰写规范（2014修订）其中注意：
（1）公式、图、表编号为（X-Y），X为章号，Y为公式、图、表的章节中的序号。
（2）图名、表名要求格式为宋体（五号加粗）
（3）页码插入在页脚中，居中排版。
二、外文资料翻译格式
（1）外文资料翻译后的中文，其文字排版时版面不分栏，字体大小、行间距按照上述规范进行排版，其余格式参考原文格式排版即可。
（2）外文原文不用排版，直接打印即可。
（3）装订时，中文翻译在前，外文原文在后。
三、光盘资料
论文、翻译（中文、原文）、开题报告、中期报告、中期检查表、程序代码、工程文件、其他照片、视频、答辩ppt等，以及其他导师要求的材料。
外文翻译译文模板
要求：1、外文资料翻译内容要求：外文资料的内容应为本学科研究领域，并与毕业设计（论文）选题相关的技术资料或专业文献，译文字数应不少于3000汉字以上，同时应在译文末注明原文的出处。
不可采用网络中直接有外文和原文的。
2、外文资料翻译格式要求：译文题目采用小二号黑体，居中；译文正文采用宋体小四号，段前、段后距为0行；行距：固定值20磅。
英文原文如果为打印的话用新罗马（Times New Roman）小四号字。
装订时原文在前，译文在后。
文章中有引用的地方在原文中也要体现。
参考文献也要翻译成中文！用于无线传感器网络数据估算的节能协调算法摘要：无线传感器网络的各节点是用电池供电的，网络的生存期取决于各节点的能耗大小。
考虑到这类传感器网络在不同地方，节点都是检测单一现象并发送信息到汇聚中心(Fusion Center， FC为其缩写形式)，以便汇聚中心能够处理实时信息。
在传统的系统中，数据处理任务是由汇聚中心来完成的，在传输之前是没有进行加工处理的。
在综合各种适值计算方法基础上，把网络分成了多个簇，数据分两个部分进行处理。
第一个部分是在各个簇的各个传感器节点上完成本地数据共享。
第二部分将在汇聚中心从各簇节点接收到所有的信息后完成。
本地数据共享将会使比特数据传输方面更高效。
在每个簇的所有节点上，我们可以采用相同的数据备份和一个虚拟的多输入-多输出（V-MIMO）架构，在簇到汇聚（FC）中心之间进行数据传输。
一个虚拟V-MIMO网络是由一组的分布式节点组成，每个节点都有自己的天线。
通过他们之间的数据共享，这些节点将变成传统的MIMO 系统。
在协同/虚拟的MIMO架构提出之前，协同阶段是没有进行任何数据处理或压缩的。
我们改变现有的V-MIMO网络算法来适应我们所关心的特殊类别的传感器网络。
我们用正交的时空分组码（STBC）作为MIMO部分。
通过仿真表明，这种算法相比于传统系统更加节能。
I.简介一个典型的无线传感器网络是由一组小型的、低价的和只有有限能源的传感器节点组成。
毕业设计(论文)外文资料和译文格式要求(模板)
成都东软学院外文资料和译文格式要求一、译文必须采用计算机输入、打印，幅面A4。
外文资料原文（复印或打印）在前，译文在后，于左侧装订。
二、具体要求1、至少翻译一篇内容与所选课题相关的外文文献。
2、译文汉字字数不少于4000字。
3、正文格式要求：宋体五号字。
译文格式参见《译文格式要求》，宋体五号字，单倍行距。
纸张纸张为A4纸，页边距上2.54cm、下2.54cm、左3.17cm、右3.17cm。
装订外文资料原文（复印或打印）在前，译文在后封面封面的专业、班级、姓名、学号等信息要全部填写正确。
封面指导教师必须为讲师以上职称，若助教则需要配备一名讲师协助指导。
讲师在前，助教在后。
指导教师姓名后面空一个中文空格，加职称。
页眉页眉说明宋体小五，左端“XX学院毕业设计（论文）”，右端“译文”。
页眉中的学院名称要与封面学院名称一致。
字数本科4000字。
附：外文资料和译文封面、空白页成都东软学院外文资料和译文专业：软件工程移动互联网应用开发班级：2班姓名：罗荣昆学号：12310420216指导教师：2015年 12月 8日Android page layoutUsing XML-Based LayoutsW hile it is technically possible to create and attach widgets to our activity purely through Java code, the way we did in Chapter 4, the more common approach is to use an XML-based layout file. Dynamic instantiation of widgets is reserved for more complicated scenarios, where the widgets are not known at compile-time (e g., populating a column of radio buttons based on data retrieved off the Internet).With that in mind, it’s time to break out the XML and learn how to lay out Android activities that way.What Is an XML-Based Layout?As the name suggests, an XML-based layout is a specification of widgets’ relationships to each other—and to their containers (more on this in Chapter 7)—encoded in XML format. Specifi cally, Android considers XML-based layouts to be resources, and as such layout files are stored in the res/layout directory inside your Android project.Each XML file contains a tree of elements specifying a layout of widgets and their containers that make up one view hierarchy. The attributes of the XML elements are properties, describing how a widget should look or how a container should behave. For example, if a Button element has an attribute value of android:textStyle = "bold", that means that the text appearing on the face of the button should be rendered in a boldface font style.Android’s SDK ships with a tool (aapt) which uses the layouts. This tool should be automatically invoked by your Android tool chain (e.g., Eclipse, Ant’s build.xml). Of particular importance to you as a developer is that aapt generates the R.java source file within your project, allowing you to access layouts and widgets within those layouts directly from your Java code. Why Use XML-Based Layouts?Most everything you do using XML layout files can be achieved through Java code. For example, you could use setTypeface() to have a button render its textin bold, instead of using a property in an XML layout. Since XML layouts are yet another file for you to keep track of, we need good reasons for using such files.Perhaps the biggest reason is to assist in the creation of tools for view definition, such as a GUI builder in an IDE like Eclipse or a dedicated Android GUI designer like DroidDraw1. Such GUI builders could, in principle, generate Java code instead of XML. The challenge is re-reading the UI definition to support edits—that is far simpler if the data is in a structured format like XML than in a programming language. Moreover, keeping generated XML definitions separated from hand-written Java code makes it less likely that somebody’s custom-crafted source will get clobbered by accident when the generated bits get re-generated. XML forms a nice middle ground between something that is easy for tool-writers to use and easy for programmers to work with by hand as needed.Also, XML as a GUI definition format is becoming more commonplace. Microsoft’s XAML2, Adobe’s Flex3, and Mozilla’s XUL4 all take a similar approach to that of Android: put layout details in an XML file and put programming smarts in source files (e.g., JavaScript for XUL). Many less-well-known GUI frameworks, such as ZK5, also use XML for view definition. While “following the herd” is not necessarily the best policy, it does have the advantage of helping to ease the transition into Android from any other XML-centered view description language. OK, So What Does It Look Like?Here is the Button from the previous chapter’s sample application, converted into an XMLlayout file, found in the Layouts/NowRedux sample project. This code sample along with all others in this chapter can be found in the Source Code area of .<?xml version="1.0" encoding="utf-8"?><Button xmlns:android="/apk/res/android"android:id="@+id/button"android:text=""android:layout_width="fill_parent"android:layout_height="fill_parent"/>The class name of the widget—Button—forms the name of the XML element. Since Button is an Android-supplied widget, we can just use the bare class name. If you create your own widgets as subclasses of android.view.View, you would need to provide a full package declara tion as well.The root element needs to declare the Android XML namespace:xmlns:android="/apk/res/android"All other elements will be children of the root and will inherit that namespace declaration.Because we want to reference this button from our Java code, we need to give it an identifier via the android:id attribute. We will cover this concept in greater detail later in this chapter.The remaining attributes are properties of this Button instance:• android:text indicates the initial text to be displayed on the button face (in this case, an empty string)• android:layout_width and android:layout_height tell Android to have the button’swidth and height fill the “parent”, in this case the entire screen—these attributes will be covered in greater detail in Chapter 7.Since this single widget is the only content in our activity, we only need this single element. Complex UIs will require a whole tree of elements, representing the widgets and containers that control their positioning. All the remaining chapters of this book will use the XML layout form whenever practical, so there are dozens of other examples of more complex layouts for you to peruse from Chapter 7 onward.What’s with the @ Signs?Many widgets and containers only need to appear in the XML layout file and do not need to be referenced in your Java code. For example, a static label (TextView) frequently only needs to be in the layout file to indicate where it should appear. These sorts of elements in the XML file do not need to have the android:id attribute to give them a name.Anything you do want to use in your Java source, though, needs an android:id.The convention is to use @+id/... as the id value, where the ... represents your locally unique name for the widget in question. In the XML layout example in the preceding section, @+id/button is the identifier for the Button widget.Android provides a few special android:id values, of the form @android:id/.... We will see some of these in various chapters of this book, such as Chapters 8 and 10.We Attach These to the Java How?Given that you have painstakingly set up the widgets and containers in an XML layout filenamed main.xml stored in res/layout, all you need is one statement in your activity’s onCreate() callback to use that layout:setContentView(yout.main);This is the same setContentView() we used earlier, passing it an instance of a View subclass (in that case, a Button). The Android-built view, constructed from our layout, is accessed from that code-generated R class. All of the layouts are accessible under yout, keyed by the base name of the layout file—main.xml results in yout.main.To access our identified widgets, use findViewById(), passing in the numeric identifier of the widget in question. That numeric identifier was generated by Android in the R class asR.id.something (where something is the specific widget you are seeking). Those widgets are simply subclasses of View, just like the Button instance we created in Chapter 4.The Rest of the StoryIn the original Now demo, the button’s face would show the current time, which would reflect when the button was last pushed (or when the activity was first shown, if the button had not yet been pushed).Most of that logic still works, even in this revised demo (NowRedux). However,rather than instantiating the Button in our activity’s onCreate() callback, we can reference the one from the XML layout:package youts;import android.app.Activity;import android.os.Bundle;import android.view.View;import android.widget.Button; import java.util.Date;public class NowRedux extends Activity implements View.OnClickListener { Button btn;@Overridepublic void onCreate(Bundle icicle) { super.onCreate(icicle);setContentView(yout.main);btn=(Button)findViewById(R.id.button);btn.setOnClickListener(this);upd ateTime();}public void onClick(View view) { updateTime();}private void updateTime() {btn.setText(new Date().toString()); }}The first difference is that rather than setting the content view to be a view we created in Java code, we set it to reference the XML layout (setContentView(yout.main)). The R.java source file will be updated when we rebuild this project to include a reference to our layout file (stored as main.xml in our project’s res/l ayout directory).The other difference is that we need to get our hands on our Button instance, for which we use the findViewById() call. Since we identified our button as @+id/button, we can reference the button’s identifier as R.id.button. Now, with the Button instance in hand, we can set the callback and set the label as needed.As you can see in Figure 5-1, the results look the same as with the originalNow demo.Figure 5-1. The NowRedux sample activity Employing Basic WidgetsE very GUI toolkit has some basic widgets: fields, labels, buttons, etc. Android’s toolkit is no different in scope, and the basic widgets will provide a good introduction as to how widgets work in Android activities.Assigning LabelsThe simplest widget is the label, referred to in Android as a TextView. Like in most GUI toolkits, labels are bits of text not editable directly by users. Typically, they are used to identify adjacent widgets (e.g., a “Name:” label before a field where one fills in a name).In Java, you can create a label by creating a TextView instance. More commonly, though, you will create labels in XML layout files by adding a TextView element to the layout, with an android:text property to set the value of the label itself. If you need to swap labels based on certain criteria, such as internationalization, you may wish to use a resource reference in the XML instead, as will be described in Chapter 9. TextView has numerous other properties of relevance for labels, such as:• android:typeface to set the typeface to use for the label (e.g., monospace) • android:textStyle to indicate that the typeface should be made bold (bold), italic (italic),or bold and italic (bold_italic)• android:textColor to set the color of the label’s text, in RGB hex format (e.g., #FF0000 for red)For example, in the Basic/Label project, you will find the following layout file:<?xml version="1.0" encoding="utf-8"?><TextView xmlns:android=/apk/res/androidandroid:layout_width="fill_parent"android:layout_height="wrap_content"android:text="You were expecting something profound?" />As you can see in Figure 6-1, just that layout alone, with the stub Java source provided by Android’s p roject builder (e.g., activityCreator), gives you the application.Figure 6-1. The LabelDemo sample applicationButton, Button, Who’s Got the Button?We’ve already seen the use of the Button widget in Chapters 4 and 5. As it turns out, Button is a subclass of TextView, so everything discussed in the preceding section in terms of formatting the face of the button still holds. Fleeting ImagesAndroid has two widgets to help you embed images in your activities: ImageView and ImageButton. As the names suggest, they are image-based analogues to TextView and Button, respectively.Each widget takes an android:src attribute (in an XML layout) to specify what picture to use. These usually reference a drawable resource, described in greater detail in the chapter on resources. You can also set the image content based on a Uri from a content provider via setImageURI().ImageButton, a subclass of ImageView, mixes in the standard Button behaviors, for responding to clicks and whatnot.For example, take a peek at the main.xml layout from the Basic/ImageView sample project which is found along with all other code samples at : <?xml version="1.0" encoding="utf-8"?><ImageView xmlns:android=/apk/res/androidandroid:id="@+id/icon"android:layout_width="fill_parent"android:layout_height="fill_parent"android:adjustViewBounds="true"android:src="@drawable/molecule" />The result, just using the code-generated activity, is shown in Figure 6-2.Figure 6-2. The ImageViewDemo sample applicationFields of Green. Or Other Colors.Along with buttons and labels, fields are the third “anchor” of most GUI toolkits. In Android, they are implemented via the EditText widget, which is a subclass of the TextView used for labels.Along with the standard TextView properties (e.g., android:textStyle), EditText has many others that will be useful for you in constructing fields, including:• android:autoText, to control if the fie ld should provide automatic spelling assistance• android:capitalize, to control if the field should automatically capitalize the first letter of entered text (e.g., first name, city) • android:digits, to configure the field to accept only certain digi ts • android:singleLine, to control if the field is for single-line input or multiple-line input (e.g., does <Enter> move you to the next widget or add a newline?)Beyond those, you can configure fields to use specialized input methods, such asandroid:numeric for numeric-only input, android:password for shrouded password input,and android:phoneNumber for entering in phone numbers. If you want to create your own input method scheme (e.g., postal codes, Social Security numbers), you need to create your own implementation of the InputMethod interface, then configure the field to use it via android: inputMethod.For example, from the Basic/Field project, here is an XML layout file showing an EditText:<?xml version="1.0" encoding="utf-8"?><EditTextxmlns:android=/apk/res/androidandroid:id="@+id/field"android:layout_width="fill_parent"android:layout_height="fill_parent"android:singleLine="false" />Note that android:singleLine is false, so users will be able to enter in several lines of text. For this project, the FieldDemo.java file populates the input field with some prose:package monsware.android.basic;import android.app.Activity;import android.os.Bundle;import android.widget.EditText;public class FieldDemo extends Activity { @Overridepublic void onCreate(Bundle icicle) { super.onCreate(icicle);setContentView(yout.main);EditText fld=(EditText)findViewById(R.id.field);fld.setText("Licensed under the Apache License, Version 2.0 " + "(the \"License\"); you may not use this file " + "except in compliance with the License. You may " + "obtain a copy of the License at " +"/licenses/LICENSE-2.0");}}The result, once built and installed into the emulator, is shown in Figure 6-3.Figure 6-3. The FieldDemo sample applicationNote Android’s emulator only allows one application in the launcher per unique Java package. Since all the demos in this chapter share the monsware.android.basic package, you will only see one of these demos in your emulator’s launcher at any one time.Another flavor of field is one that offers auto-completion, to help users supply a value without typing in the whole text. That is provided in Android as the AutoCompleteTextView widget and is discussed in Chapter 8.Just Another Box to CheckThe classic checkbox has two states: checked and unchecked. Clicking the checkbox toggles between those states to indicate a choice (e.g., “Ad d rush delivery to my order”). In Android, there is a CheckBox widget to meet this need. It has TextView as an ancestor, so you can use TextView properties likeandroid:textColor to format the widget. Within Java, you can invoke: • isChecked() to determi ne if the checkbox has been checked• setChecked() to force the checkbox into a checked or unchecked state • toggle() to toggle the checkbox as if the user checked itAlso, you can register a listener object (in this case, an instance of OnCheckedChangeListener) to be notified when the state of the checkbox changes.For example, from the Basic/CheckBox project, here is a simple checkbox layout:<?xml version="1.0" encoding="utf-8"?><CheckBox xmlns:android="/apk/res/android"android:id="@+id/check"android:layout_width="wrap_content"android:layout_height="wrap_content"android:text="This checkbox is: unchecked" />The corresponding CheckBoxDemo.java retrieves and configures the behavior of the checkbox:public class CheckBoxDemo extends Activityimplements CompoundButton.OnCheckedChangeListener { CheckBox cb;@Overridepublic void onCreate(Bundle icicle) { super.onCreate(icicle);setContentView(yout.main);cb=(CheckBox)findViewById(R.id.check);cb.setOnCheckedChangeListener(this);}public void onCheckedChanged(CompoundButton buttonView,boolean isChecked) {if (isChecked) {cb.setText("This checkbox is: checked");}else {cb.setText("This checkbox is: unchecked");}}}Note that the activity serves as its own listener for checkbox state changes since it imple ments the OnCheckedChangeListener interface (via cb.setOnCheckedChangeListener(this)). The callback for the listener is onCheckedChanged(), which receives the checkbox whose state has changed and what the new state is. In this case, we update the text of the checkbox to reflect what the actual box contains.The result? Clicking the checkbox immediately updates its text, as you can see in Figures 6-4 and 6-5.Figure 6-4. The CheckBoxDemo sample application, with the checkbox uncheckedFigure 6-5. The same application, now with the checkbox checkedTurn the Radio UpAs with other implementations of radio buttons in other toolkits, Android’s radio buttons are two-state, like checkboxes, but can be grouped such that only one radio button in the group can be checked at any time.Like CheckBox, RadioButton inherits from CompoundButton, which in turn inherits fromTextView. Hence, all the standard TextView properties for font face, style, color, etc., are available for controlling the look of radio buttons. Similarly, you can call isChecked() on a RadioButton to see if it is selected, toggle() to select it, and so on, like you can with a CheckBox.Most times, you will want to put your RadioButton widgets inside of aRadioGroup. The RadioGroup indicates a set of radio buttons whose state is tied, meaning only one button out of the group can be selected at any time. If you assign an android:id to your RadioGroup in your XML layout, you can access the group from your Java code and invoke:• check() to check a specific radio button via its ID (e.g., group.check(R.id.radio1))• clearCheck() to clear all radio buttons, so none in the group are checked• getCheckedRadioButtonId() to get the ID of the currently-checked radio button (or -1 if none are checked)For example, from the Basic/RadioButton sample application, here is an XML layout showing a RadioGroup wrapping a set of RadioButton widgets: <?xml version="1.0" encoding="utf-8"?> <RadioGroupxmlns:android=/apk/res/androidandroid:orientation="vertical"android:layout_width="fill_parent"android:layout_height="fill_parent" ><RadioButton android:id="@+id/radio1"android:layout_width="wrap_content"android:layout_height="wrap_content"android:text="Rock" /><RadioButton android:id="@+id/radio2"android:layout_width="wrap_content"android:layout_height="wrap_content"android:text="Scissors" /><RadioButton android:id="@+id/radio3"android:layout_width="wrap_content"android:layout_height="wrap_content"android:text="Paper" /></RadioGroup>Figure 6-6 shows the result using the stock Android-generated Java forthe project and this layout.Figure 6-6. The RadioButtonDemo sample application Note that the radio button group is initially set to be completely unchecked at the outset. To pre-set one of the radio buttons to be checked, use either setChecked() on the RadioButton or check() on the RadioGroup from within your onCreate() callback in your activity.It’s Quite a ViewAll widgets, including the ones previously shown, extend View, and as such give all widgets an array of useful properties and methods beyond those already described.Useful PropertiesSome of the properties on View most likely to be used include:• Controls the focus sequence:• android:nextFocusDown• android:nextFocusLeft• android:nextFocusRight• android:nextFocusUp• android:visibility, which controls wheth er the widget is initially visible• android:background, which typically provides an RGB color value (e.g., #00FF00 for green) to serve as the background for the widgetUseful MethodsYou can toggle whether or not a widget is enabled via setEnabled() and see if it is enabled via isEnabled(). One common use pattern for this is to disable some widgets based on a CheckBox or RadioButton selection.You can give a widget focus via requestFocus() and see if it is focused via isFocused(). You might use this in concert with disabling widgets as previously mentioned, to ensure the proper widget has the focus once your disabling operation is complete.To help navigate the tree of widgets and containers that make up an activity’s overall view, you can use:• get Parent() to find the parent widget or container• findViewById() to find a child widget with a certain ID• getRootView() to get the root of the tree (e.g., what you provided to the activity via setContentView())Android 页面布局使用XML进行布局虽然纯粹通过Java代码在activity上创建和添加部件，在技术上是可行的，我们在第4章中做的一样，更常见的方法是使用一种基于XML的布局文件。
外文文献翻译要求及封面
根据《普通高等学校本科毕业设计（论文）指导》地内容，特对外文文献翻译提出以下要求：
一、翻译地外文文献一般为～篇，外文字符要求不少于万（或翻译成中文后至少在字以上）.
二、翻译地外文文献应主要选自学术期刊、学术会议地文章、有关著作及其他相关材料，应与毕业论文（设计）主题相关，并作为外文参考文献列入毕业论文（设计）地参考文献.并在每篇中文译文首页用“脚注”形式注明原文作者及出处，中文译文后应附外文原文.个人收集整理勿做商业用途
三、中文译文地基本撰写格式为题目采用小三号黑体字居中打印，正文采用宋体小四号字，行间距一般为固定值磅，标准字符间距.页边距为左，右，上下各，页面统一采用纸.个人收集整理勿做商业用途
四、封面格式由学校统一制作（注：封面上地“翻译题目”指中文译文地题目，附件为一篇外文翻译地封面格式，附件二为两篇外文翻译地封面格式），若有两篇外文文献，请按“封面、译文一、外文原文一、译文二、外文原文二”地顺序统一装订.个人收集整理勿做商业用途
信息工程学院教科办
年月日
杭州电子科技大学信息工程学院
毕业设计（论文）外文文献翻译
毕业设计（论文）题
目
翻译题目
系
专业
姓名
班级
学号
指导教师
杭州电子科技大学信息工程学院毕业设计（论文）外文文献翻译
毕业设计（论文）题
目
翻译（）题目
翻译（）题目
系
专业
姓名
班级
学号
指导教师。
外文翻译及外文原文(参考格式)
外文翻译要求：1、外文资料与毕业设计（论文）选题密切相关，译文准确、质量好。
2、阅读2篇幅以上（10000字符左右）的外文资料，完成2篇不同文章的共2000汉字以上的英译汉翻译3、外文资料可以由指导教师提供，外文资料原则上应是外国作者。
严禁采用专业外语教材文章。
4、排序：“一篇中文译文、一篇外文原文、一篇中文译文、一篇外文原文”。
插图内文字及图名也译成中文。
5、标题与译文格式（字体、字号、行距、页边距等）与论文格式要求相同。
下页附：外文翻译与原文参考格式2英文翻译 (黑体、四号、顶格)外文原文出处：(译文前列出外文原文出处、作者、国籍，译文后附上外文原文)《ASHRAE Handbook —Refrigeration 》.CHAPTER3 .SYSTEM Practices for ammonia 3.1 System Selection 3.2 Equipment3.10 Reciprocating Compressors第3章 氨制冷系统的实施3.1 系统选择在选择一个氨制冷系统设计时，须要考虑一些设计决策要素，包括是否采用（1）单级压缩（2）带经济器的压缩（3）多级压缩（4）直接蒸发（5）满液式（6）液体再循环（7）载冷剂。
单级压缩系统基本的单级压缩系统由蒸发器、压缩机、冷凝器、储液器（假如用的话）和制冷剂控制装置（膨胀阀、浮球阀等）。
1997 ASHRAE 手册——“原理篇”中的第一章讨论了压缩制冷循环。
图1.壳管式经济器的布置外文翻译的标题与译文中的字体、字号、行距、页边距等与论文格式相同。
英文原文(黑体、四号、顶格)英文翻译2（黑体，四号，顶格）外文原文出处：（黑体，四号，顶格）P. Fanning. Nonlinear Models of Reinforced and Post-tensioned Concrete Beams. Lecturer, Department of Civil Engineering, University College Dublin. Received 16 Jul 2001.非线形模型钢筋和后张法预应力混凝土梁摘要:商业有限元软件一般包括混凝土在荷载做用下非线性反应的专用数值模型。
外文文献翻译封面格式及要求(模版)
毕业论文外文文献翻译院年级专业：2009级XXXXXXXXXXX 姓 名：学 号：附 件：备注：（注意：备注页这一整页的内容都不需要打印，看懂了即可）1.从所引用的与毕业设计（论文）内容相近的外文文献中选择一篇或一部分进行翻译（不少于3000实词）；2.外文文献翻译的装订分两部分，第一部分为外文文献；第二部分为该外文文献的中文翻译，两部分之间用分页符隔开。
也就是说，第一外文文献部分结束后，使用分页符，另起一页开始翻译。
3.格式方面，外文文献的格式，除了字体统一使用Times new roman 之外，其他所有都跟中文论文的格式一样。
中文翻译的格式，跟中文论文的格式一样。
（注意：备注页这一整页的内容都不需要打印，看懂了即可,定稿后,请删除本页.）范文如下：注意,下面内容每一部份均已用分页符分开了,如果用本模板,请将每一模块单独删除,直接套用到每一模板里面,不要将全部内容一次性删除.【Abstract】This paper has a systematic analysis on outside Marco-environment of herbal tea beverage industry and major competitors of brands inside the herbal tea market. Based onthe theoretic framework, this paper takes WONG LO KAT and JIA DUO BAO herbal tea as an example, and researches the strategy on brand positioning and relevant marketing mix of it. Through analysis on the prevention sense of WONG LO KAT herbal tea, it was positioned the beverage that can prevent excessive internal heat in body, a new category divided from the beverage market. the process of brand positioning of it in Consumers brain was finished. Based on this positioning strategy, WONG LO KAT reasonably organized and arranged its product strategy, price strategy, distribution strategy and promotion strategy, which not only served for and further consolidated the position of preventing excessive internal heat in body, but also elevated the value of brand. The JDB and WONG LO KAT market competition brings us enlightenment. Reference the successful experience from the JDB and lessons from the failure of the WONG LO KAT.，Times New Roman.【Key Words】Brand positioning; Marketing mix; Positioning Strategy; enlightenment, lessons；ABC（本页为英文文献摘要，关键词两项一起单独一页，字体为：Times New Roman，小四号，1.5倍行距）(注:以下为英文文献正文内容,英文全文3000字.具体标题以原文为准.全文字体为Times New Roman.行间距为1.5倍.字号大小与论文正文的各级标题一致.如下:)I.Times New Roman ，Times New Roman，Times New RomanTimes New Roman, Times New Roman, Times New Roman, Times New Roman,This paper has a systematic analysis on outside Marco-environment of herbal tea beverage industry and major competitors of brands inside the herbal tea market. Based on the theoretic framework, this paper takes WONG LO KAT and JIA DUO BAO herbal tea as an example, and researches the strategy on brand positioning and relevant marketing mix of it. Through analysis on the prevention sense of WONG LO KAT herbal tea, it was positioned the beverage that can prevent excessive internal heat in body, a new category divided from the beverage market. the process of brand positioning of it in Consumers brain was finished. Based on this positioning strategy, WONG LO KAT reasonably organized and arranged its product strategy, price strategy, distribution strategy and promotion strategy, which not only served for and further consolidated the position of preventing excessive internal heat in body, but also elevated the value of brand. The JDB and WONG LO KAT market competition brings us enlightenment. Reference the successful experience from the JDB and lessons from the failure of the WONG LO KAT.This paper has a systematic analysis on outside Marco-environment of herbal tea beverage industry and major competitors of brands inside the herbal tea market. Based on the theoretic framework, this paper takes WONG LO KAT and JIA DUO BAO herbal tea as an example, and researches the strategy on brand positioning and relevant marketing mix of it. Through analysis on the prevention sense of WONG LO KAT herbal tea, it was positioned the beverage that can prevent excessive internal heat in body, a new category divided from the beverage market. the process of brand positioning of it in Consumers brain was finished. Based on this positioning strategy, WONG LO KAT reasonably organized and arranged its product strategy, price strategy, distribution strategy and promotion strategy, which not only served for and further consolidated the position of preventing excessive internal heat in body, but also elevated the value of brand. The JDB and WONG LO KAT market competition brings us enlightenment. Reference the successful experience from the JDB and lessons fromthe failure of the WONG LO KAT.II.Times New Roman ，Times New Roman，Times New RomanTimes New Roman, Times New Roman, Times New Roman, Times New Roman,This paper has a systematic analysis on outside Marco-environment of herbal tea beverage industry and major competitors of brands inside the herbal tea market. Based on the theoretic framework, this paper takes WONG LO KAT and JIA DUO BAO herbal tea as an example, and researches the strategy on brand positioning and relevant marketing mix of it. Through analysis on the prevention sense of WONG LO KAT herbal tea, it was positioned the beverage that can prevent excessive internal heat in body, a new category divided from the beverage market. the process of brand positioning of it in Consumers brain was finished. Based on this positioning strategy, WONG LO KAT reasonably organized and arranged its product strategy, price strategy, distribution strategy and promotion strategy, which not only served for and further consolidated the position of preventing excessive internal heat in body, but also elevated the value of brand. The JDB and WONG LO KAT market competition brings us enlightenment. Reference the successful experience from the JDB and lessons from the failure of the WONG LO KAT.This paper has a systematic analysis on outside Marco-environment of herbal tea beverage industry and major competitors of brands inside the herbal tea market. Based on the theoretic framework, this paper takes WONG LO KAT and JIA DUO BAO herbal tea as an example, and researches the strategy on brand positioning and relevant marketing mix of it. Through analysis on the prevention sense of WONG LO KAT herbal tea, it was positioned the beverage that can prevent excessive internal heat in body, a new category divided from the beverage market. the process of brand positioning of it in Consumers brain was finished. Based on this positioning strategy, WONG LO KAT reasonably organized and arranged its product strategy, price strategy, distribution strategy and promotion strategy, which not only served for and further consolidated the position of preventing excessive internal heat in body, but also elevated the value of brand. The JDB and WONG LO KAT market competition brings us enlightenment. Reference the successful experience from the JDB and lessons from the failure of the WONG LO KAT.III.Times New Roman ，Times New Roman，Times New RomanTimes New Roman, Times New Roman, Times New Roman, Times New Roman,This paper has a systematic analysis on outside Marco-environment of herbal tea beverage industry and major competitors of brands inside the herbal tea market. Based on the theoretic framework, this paper takes WONG LO KAT and JIA DUO BAO herbal tea as an example, and researches the strategy on brand positioning and relevant marketing mix of it. Through analysis on the prevention sense of WONG LO KAT herbal tea, it was positioned the beverage that can prevent excessive internal heat in body, a new category divided from the beverage market. the process of brand positioning of it in Consumers brain was finished. Based on this positioning strategy, WONG LO KAT reasonably organized and arranged its product strategy, price strategy, distribution strategy and promotion strategy, which not only served for and further consolidated the position of preventing excessive internal heat in body, but also elevated the value of brand. The JDB and WONG LO KAT market competition brings us enlightenment. Reference the successful experience from the JDB and lessons from the failure of the WONG LO KAT.This paper has a systematic analysis on outside Marco-environment of herbal tea beverage industry and major competitors of brands inside the herbal tea market. Based on the theoretic framework, this paper takes WONG LO KAT and JIA DUO BAO herbal tea as an example, and researches the strategy on brand positioning and relevant marketing mix of it. Through analysis on the prevention sense of WONG LO KAT herbal tea, it was positioned the beverage that can prevent excessive internal heat in body, a new category divided from the beverage market. the process of brand positioning of it in Consumers brain was finished. Based on this positioning strategy, WONG LO KAT reasonably organized and arranged its product strategy, price strategy, distribution strategy and promotion strategy, which not only served for and further consolidated the position of preventing excessive internal heat in body, but also elevated the value of brand. The JDB and WONG LO KAT market competition brings us enlightenment. Reference the successful experience from the JDB and lessons from the failure of the WONG LO KAT.This paper has a systematic analysis on outside Marco-environment of herbal teabeverage industry and major competitors of brands inside the herbal tea market. Based on the theoretic framework, this paper takes WONG LO KAT and JIA DUO BAO herbal tea as an example, and researches the strategy on brand positioning and relevant marketing mix of it. Through analysis on the prevention sense of WONG LO KAT herbal tea, it was positioned the beverage that can prevent excessive internal heat in body, a new category divided from the beverage market. the process of brand positioning of it in Consumers brain was finished. Based on this positioning strategy, WONG LO KAT reasonably organized and arranged its product strategy, price strategy, distribution strategy and promotion strategy, which not only served for and further consolidated the position of preventing excessive internal heat in body, but also elevated the value of brand. The JDB and WONG LO KAT market competition brings us enlightenment. Reference the successful experience from the JDB and lessons from the failure of the WONG LO KAT.This paper has a systematic analysis on outside Marco-environment of herbal tea beverage industry and major competitors of brands inside the herbal tea market. Based on the theoretic framework, this paper takes WONG LO KAT and JIA DUO BAO herbal tea as an example, and researches the strategy on brand positioning and relevant marketing mix of it. Through analysis on the prevention sense of WONG LO KAT herbal tea, it was positioned the beverage that can prevent excessive internal heat in body, a new category divided from the beverage market. the process of brand positioning of it in Consumers brain was finished. Based on this positioning strategy, WONG LO KAT reasonably organized and arranged its product strategy, price strategy, distribution strategy and promotion strategy, which not only served for and further consolidated the position of preventing excessive internal heat in body, but also elevated the value of brand. The JDB and WONG LO KAT market competition brings us enlightenment. Reference the successful experience from the JDB and lessons from the failure of the WONG LO KAT.【摘要】本文是对凉茶饮料的宏观环境以及凉茶市场内部主要品牌的竞争对手进行了系统分析。
毕业论文外文翻译格式
因为学校对毕业论文中的外文翻译并无规定，为统一起见，特做以下要求：1、每篇字数为1500字左右，共两篇；2、每篇由两部分组成：译文 +原文。
3 附件中是一篇范本，具体字号、字体已标注。
外文翻译（包含原文）（宋体四号加粗）外文翻译一（宋体四号加粗）作者：（宋体小四号加粗）Kim Mee Hyun Director, Policy Research & Development Team, Korean Film Council （小四号）出处：（宋体小四号加粗）Korean Cinema from Origins to RenaissanceP358~P34C）韩国电影的发展及前景（标题：宋体四号加粗）1996~现在在过去的十年间，韩国电影经历了难以置信的增长。
上个世纪60年代，韩国电影迅速崛起，然而很快便陷入停滞状态，直到90年代以后，韩国电影又重新进入繁盛时期。
在这个时期，韩国电影在数量上并没有大幅的增长，但多部电影的观影人数达到了上千万人次。
1996年，韩国本土电影的市场占有量只有23.1%。
但是到了1998年，市场占有量增长到35.8%,到2001年更是达到了50% 虽然从1996年开始，韩国电影一直处在不断上升的过程中，但是直到1999年姜帝圭导演的《生死谍变》的成功才诞生了韩国电影的又一个高峰。
虽然《生死谍变》创造了韩国电影史上的最高电影票房纪录，但是1999年以后最高票房纪录几乎每年都会被刷新。
当人们都在津津乐道所谓的“韩国大片”时，2000年朴赞郁导演的《共同警备区JSA〉和2001年郭暻泽导演的《朋友》均成功刷新了韩国电影最高票房纪录。
2003年康佑硕导演的《实尾岛》和2004年姜帝圭导演的又一部力作《太极旗飘扬》开创了观影人数上千万人次的时代。
姜帝圭和康佑硕导演在韩国电影票房史上扮演了十分重要的角色。
从1993年的《特警冤家》到2003年的《实尾岛》，康佑硕导演了多部成功的电影。
外文翻译格式及规范
嘉兴学院毕业论文（设计）外文翻译撰写格式规范一、外文翻译形式要求1、要求本科生毕业论文（设计）外文翻译部分的外文字符不少于1.5万字, 每篇外文文献翻译的中文字数要求达到2000字以上，一般以2000~3000字左右为宜。
2、翻译的外文文献应主要选自学术期刊、学术会议的文章、有关著作及其他相关材料，应与毕业论文（设计）主题相关，并作为外文参考文献列入毕业论文（设计）的参考文献。
3、外文翻译应包括外文文献原文和译文，译文要符合外文格式规范和翻译习惯。
二、打印格式嘉兴学院毕业论文（设计）外文翻译打印纸张统一用A4复印纸，页面设置：上：2.8；下：2.6；左：3.0；右：2.6；页眉：1.5；页脚：1.75。
段落格式为：1.5倍行距，段前、段后均为0磅。
页脚设置为：插入页码，居中。
具体格式见下页温馨提示：正式提交“嘉兴学院毕业论文（设计）外文翻译”时请删除本文本中说明性的文字部分（红字部分）。
嘉兴学院本科毕业论文（设计）外文翻译题目：（指毕业论文题目）学院名称：服装与艺术设计学院专业班级：楷体小四学生姓名：楷体小四一、外文原文见附件（文件名：12位学号+学生姓名+3外文原文．文件扩展名）。
二、翻译文章翻译文章题目（黑体小三号，1.5倍行距，居中）作者（用原文，不需翻译，Times New Roman五号，加粗，1.5倍行距，居中）工作单位（用原文，不需翻译，Times New Roman五号，1.5倍行距，居中）摘要：由于消费者的需求和汽车市场竞争力的提高，汽车检测标准越来越高。
现在车辆生产必须长于之前的时间并允许更高的价格进行连续转售……。
(内容采用宋体五号，1.5倍行距)关键词：汽车产业纺织品，测试，控制，标准，材料的耐用性1 导言（一级标题，黑体五号，1.5倍行距，顶格）缩进两个字符，文本主体内容采用宋体（五号），1.5倍行距参考文献（一级标题，黑体五号， 1.5倍行距，顶格）略（参考文献不需翻译，可省略）资料来源：AUTEX Research Journal, V ol. 5, No3, September 2008*****译****校（另起一页）三、指导教师评语***同学是否能按时完成外文翻译工作。
外文文献翻译--内容格式
外文文献翻译的撰写说明一、外文文献翻译的内容通过外文文献查阅与翻译，进一步提高掌握使用外文的能力，熟悉本专业的主要的外文书刊，了解毕业设计（论文）课题的国内外信息与发展动向。
翻译的外文文献应主要选自学术期刊、学术会议的文章、有关著作及其他相关材料，应与毕业设计（论文）主题相关，并作为外文参考文献列入毕业设计（论文）的参考文献，中文译文后应附外文原文。
（一）标题应真实反映翻译外文的主体内容或原外文标题内容，一般控制在20个汉字以内。
可以用副标题对标题予以补充说明；（二）标题下方正中为外文作者署名；（三）外文翻译成中文的内容；（四）外文著录。
二、字数要求一般要求为2000-3000汉字或不少于15000外文字符。
三、打印格式1、打印用纸：A42、页面设置：上：3.5cm；下:2.5 cm；左：3.0 cm；右2.4 cm；装订线：0.5cm；页眉：2.5 cm；页脚：1.8cm；行间距：固定值22磅3、字体、字号：1 一级标题：黑体、三号；1.1…二级标题：黑体、四号；1.1.1…三级标题：宋体、加粗、小四；标题顶格写，后空一个字位置正文部分：宋体、小四；每段空2字位置页眉“黄石理工学院外文文献翻译”，宋体、5号，居右排列；页码居页面底端靠右排列。
四、参考文献著录参考文献著录按照GB7714-87文参考文献著录规则执行。
书写顺序为：序号·作者·论文名或著作名·杂志或会议名·卷号、期号或会议地点·出版社·页号·年。
摘要、关键词：摘要、关键词顶格写，后用冒号摘要：废水回用可以大大减少……关键词：废水回收利用；反冲洗；上清液中间用“；”分隔，最后没有“。
”外文参考文献转换成中文参考文献：外文参考文献著录格式与中文不同。
1、外文中（康韦尔和麦克2001; Dotremont等，1999;。
LeGouellec等，2004;。
纳赛尔等人2002;。
外文文献翻译封面格式和要求模版
毕业论文外文文献翻译年级专业：2011级国际经济与贸易姓 名：学 号：附 件：Challenges and Opportunities备注：（注意：备注页这一整页的内容都不需要打印，看懂了即可）1.从所引用的与毕业设计（论文）内容相近的外文文献当选择一篇或一部份进行翻译（很多于3000实词）；2.外文文献翻译的装订分两部份，第一部份为外文文献，页码从正文开始到英文终止；第二部份为该外文文献的中文翻译，页码从头从正文开始到终止，中英文两部份之间用分页符隔开。
也确实是说，第一外文文献部份终止后，利用分页符，另起一页开始翻译。
3.格式方面，外文文献的格式，除字体统一利用Times new roman之外，其他所有都跟中文论文的格式一样。
中文翻译的格式，跟中文论文的格式一样。
（注意：备注页这一整页的内容都不需要打印，看懂了即可,定稿后,请删除本页.）【Abstract】Exports of dairy products are becoming increasingly important in terms of export earnings for Australia. The industry is the fourth highest foreign exchange earner compared toall Australia's food exports. However, Australian exports of dairy products account for about 67 per cent of the total Australian production of dairy products, and about 13 per cent of total world exports of dairy products. About 68 per cent of Australian dairy products exports are sold on Asian markets. The purpose of this paper is to examine the challenging issues and opportunities for Australian exports of dairy products on world markets and to identify potential and emerging export markets for Australian dairy is highly restricted on its access to world dairy product markets by the impact of export subsidies and other trade barriers of overseas markets. The current cconomic and political crises in Asia are also not favourable to maintain export sales on some of the Asian export support schcme in Australia has made exporting attractive relativc to domestic sales. But it is anticipated that the termination of the scheme after June 2000, will reduce production and exports by 6 and 20 per cent, respectively in the short run. However, in the long run,resources will be efficiently used without government intervention and Australian dairy products will also bc competitivc on the domestic is scope for greater market opportunities in the emerging markets in Asia and other parts of the world for Australian dairy will also bcnefit from the agreement on international trade that directs exporting countries to reduce export subsidy and remove non-tariff trade barriers on exports of dairy products. Australia should implement appropriatc measures to increase the milk yield per ww, to improve the quality of dairy products and to identify the need for market promotion and rescarch in order to increase the volume of dairy product exports on world markets, especially in Asia and othcr potential markets such as Middle East,Africa, Europe and the Americas. 【Keywords】Australia, Dairy Milk（本页为英文文献摘要，关键词两项一路单唯一页，字体为：Times New Roman，小四号，倍行距）I. DAIRY PRODUCTS INDUSTRY IN AUSTRALIADairy manufacturing is one of Australia's leading dairy terms of foreign exchange earnings, the industry ranks fourth (after meat, wheat and sugar) compared to all Australia's food exports(ADIC, 1996). The real gross value of production was estimated atA$billion in 1997, accounting for about 66 per cent of the combined value of market and manufacturing milk at the farm gate. The total real value of Australian exports of dairy products was about $ billion in 1996, and represented about 8 per cent of total farm exports. Likewise, Australia's dairy exports contributed about 2 per cent to total Australian exports in 1995-96 (Doucouliagos,1997). However, Australia has little influence on world price as its share accounted for about 13 per cent of world trade in 1996.Manufacturing milk is produced in all states in Australia, and there are significant regional differences in the production of dairying due to climatic and natural resources that are favorable to dairying to be produced based on year round pasture grazing (NSWA, 1996-97). In 1997, national milk production was estimated at 9 billion litres, and New South Wales is second behind Victoria, accounting for 13 per cent and 62 per cent, respectively of the nation's annual milk production(ABARE, 1997). Total milk production increased at an average of about per cent between 1988 and 1997. About billion litres of milk were used for manufacturing purposes, accounting for about 79 per cent of the total milk production. Victoria accounts for 79 per cent,Tasmania 6 per cent, and NSW 5 per cent of the total dairy products produced in the country (ADC,1997).The production of dairy products recorded an average increase of per cent between 1988 and 1997. However, Australian exports of dairy products as a proportion of total production increased on average by per cent over the same period. This was due to world surplus production of dairy products as a result of domestic industry support by some of the world's largest producers (EU and USA). Subsidised exports of dairy products account for about 50 per cent of globally traded dairy products, and this lowers international market prices of dairy products (ADIC, 1997). Australian production of dairy products accounted for about 4 per cent of total world production, and about 13 per cent of total world export sales . Thus, price taker countries such as Australia are adversely affected by the exportable surpluses of dairy products directed to world markets by major exporting countries.The expansion of milk production in Australia has come from an increase in the number of dairy cows. The number of daq cows increased from 1,714,000 head in 1988 to 2,046,000 head in 1997, an average increase of about per cent. The milk yield per cow also recorded an average increase of about 2 per cent over the same , the milk yield per cow declined by about 5 per cent in 1997 compared to 1996. This is attributed to drought and other adverse weather conditions experienced by many dairy-producing regions.Australia's dairy products industry has the potential to increase the volume of its production and exports since the country is well endowed with natural resources necessary to increase dairy also has suitable climate that is favourable to dairy production based on year round pasture production. In addition, Australia's dairy farms are family owned and operated, and hired labour does not contribute a higher percentage to the cost of production. Thus, Australia is considered as one of the efficient, low cost milk producing countries (ADC,1997). The country has also locational advantage to have access to the Asian markets, which are the major importers of Australian dairy domestic production capacity and the exports of dairy products are positively related. Accordingly,the volume of exports could be increased through the expansion of manufacturing milk production by increasing the number of dairy herds and milk yield per cow, provided Australia makes an effort to undertake marketing promotion and research to capture sizeable market shares in the potential and emerging study carried out by ABARE has projected that milk production in Australia will increase by about 3 per cent a year to the 1999-2000 fiscal has been attributed mainly to the estimated increase in the number of dairy herds, milk yield per cow, improved pasture, livestock management techniques and increased capital investment (ADIC, 1996).ARRANGEMENTS FOR MANUFACTURING MILK IN AUSTRALIA To facilitate the proper functioning of a free market system, market information must be available so that buyers and sellers are aware of the production and pricing arrangements (Kidane and Gunawardana,Downloaded by [The University of British Columbia] at 00:35 10 June 2021 1997, p. 37). Thus, producers and consumers would perform their functions efficiently, and prices and quality of dairy products will be competitive. To assist in meeting these market criteria, the government has established the Australian Dairy Industry Council (ADIC), Products Federation Inc. (ADPF), Australia Dairy Farmers' Federation Ltd. (ADFF), Market MilkFederation of Australia Inc. (MMFA),Australian Dairy Corporation (ADC) and Dairy Research Development Corporation (DRDC). These organisations are expected among other things to disseminate market information and coordinate production and market activities. For example, some of the major objectives of the ADC are to improve the domestic market for dairy pioducts; to provide technical and product advice to emerging markets; to undertake a range of export promotion activities in overseas markets;and international promotion focused on growing Asian markets such as Japan, Hong Kong, China, Vietnam, Singapore, etc. (ADIC,1996). The farm gate pricing and domestic milk support schemes are discussed below.(i)Farm Gate PricingThe government does not have formal control over the prices processors pay to farmers Producing milk used in manufacturing products. The manufacturing milk prices are based on both milk fat and protein, and payment to farmers by processors also depends on the quality, volumes and seasonal incentives. High prices are offered to farmers by factories to encourage them to maintain production during the dry period.Most manufacturers offer different prices as their profits are affected by factors such as product mix, marketing strategies and processing efficiencies (NSWA, 1996-97). Consequently, farm gate prices paid for manufacturing milk are lower than the prices paid for market milk . (ii)Domestic Milk Support SchemePrior to July 1, 1995, the marketing of manufactured dairy products were funded by a levy on all Australian milk production under the Market Support Scheme (Crean Plan). The scheme raised domestic farm gate prices for manufacturing milk above international prices by about 2 cents a litre. However, following the Uruguay Round agreement on manufactured dairy products, Australia introduced a scheme known as 'Domestic Market Support Scheme (DMS)' on July 1, 1995. The new scheme that is administered by the Australian Dairy Corporation imposes compulsory levies both on market milk and manufacturing milk for sales on the domestic market. In 1997-98, the rates of these levies were about and cents per litre,respectively (ADC, 1997). The funds raised by these levies are targeted to make domestic support payment to farmers who produce manufacturing milk. This scheme provides incentives to farmers to increase production of milk used in dairy products for export markets. However,this extended market arrangement will cease at the end of June 2000,and like many other industries,the dairy industry will receive Commonwealth assistance estimated at 5 per cent in tariff terms after June 2000. In 1995/96, this implicit export subsidy increased gross returns on manufacturing milk by about 7 per cent (Industry Commission, 1997). This has made exporting dairy products more attractive and has encouraged milk producers to use most of the resources in the production of dairying.However, it is predicted that the removal of this export support will reduce milk production by 6 per cent and the volume of exports by 20 per cent as producers will concentrate on the domestic markets. This will have a short term effect of reducing manufacturing milk producers' incomes, and may also encourage producers to move some resources into alternative enterprises in the long run. Consequently, this is likely to reduce production of manufactured dairy products for export markets with effect from the end of June 2000. However, given the available resources necessary to increase the volume of production, with efficient use of resources without government intervention and export promotion undertaken by ADC and DRDC, Australian dairy producers will still have the incentives to focus on both export and domestic markets. Optimal allocation of resources is also likely to increase dairy production, while domestic prices will decline, as the exportable surplus will be directed to domestic markets (ABARE, 1991a). DAIRY PRODUCTS EXPORTS AND CHALLENGING ISSUESIn Australia, milk production is subject to seasonal influences, but production and exports of dairy products have recorded an average increase of about per cent and per cent between 1988 and 1997. The export price, which includes export freight,insurance, export commission and handling charges, is very attractive compared to the domestic wholesale prices. This partly acts as an incentive for producers to direct a large percentage of their dairy products to export markets and Australian dairy products to be less competitive on domestic markets.Australia is considered as a relatively non-subsidized exporter compared to EU and the USA, and Australia has to compete with countries, which have considerable domestic dairy industry support and guaranteed price for manufactured products. Australia is being excluded by the impact of these export subsidy programs of the major competitors to have access to world markets. As specified in the Uruguay Round Outcome (GAW, the agreement (reduction in export subsidies and use of tariffs as trade barriers)is being implemented over a five year period with effect from , the short run effect from the termination of the domestic support scheme and thelimited access that Australia will have to overseas markets until the Uruguay agreement is fully implemented, will have negative impacts on the exports of Australian dairy products.Cheese, skim milk powder and whole milk powder are the major components of exports of Australian dairy products and account for 22, 33 and 17 per cent of the total exports. Australian exports have continued to grow and accounted for about 67 per cent of total production of dairy products in 1997. However, Australia still has the potential to increase the volume of dairy production,which can be achieved by improved feed, breeding and farm management practices. But Australia will have to give priority to export development to sell the additional supply of dairy products to emerging markets in Asia, Middle East, Africa and the Americas.In 1997, major importers of Australian dairy products (mainly skim milk powder, cheese and whole milk powder) were Japan, Malaysia, the Philippines, Thailand and Singapore, and their market shares accounted for about 41 per cent of Australia's total exports of dairy products. Japan and the Philippines are the major importers of Australian cheese and skim milk powder, respectively. In 1997, Japan's imports of cheese accounted for about 47 per cent of Australia's total exports of cheese, and the Philippines's imports of skim milk powder accounted for about per cent of ~ustralia's total exports of skim milk powder (ABARE, 1997). The total volume of exports and total real value of dairy products have increased by 21 per cent and per cent, respectively in 1997 compared to 1996. The world dairy production also increased by about 2 per cent over the same period. This partly affected the Australian export prices and the increase in the value of exports is substantially lower compared to the volume of exports .Asia is the leading export market for Australian dairy , it is anticipated that there are considerable hurdles-to maintain sales on export markets in the region. Most of the Asian nations are experiencing slow economic growth due to the recent financial crisis and political instability in some parts of the region.Australia imports dairy products (mainly cheese) to meet the increasing domestic consumption as most of the country's dairy products are exported due to the relative attractiveness of exporting to domestic total domestic consumption of dairy products fluctuated throughout the 1990s but has shown an upward trend in recent years. Thus, the volume of dairy products sales on the domestic market had also fluctuated during the same period but increased on average by about 2 per cent between 1988 and 1997. Similarly, the consumption per person ofdairy products has been fluctuating since 1989 but has increased on average by per cent over the same period.Imports of dairy products increased on average by about per cent, and exports of the same product recorded an average increase of about per cent, between 1988 and of imported dairy products are relatively lower compared with the prices of domestically processed dairy products. Imports of dairy products at lower prices have made the Australian processed dairy products less competitive on domestic markets. New Zealand is the major supplier of cheese to Australia. The closer Economic Relations agreement between New Zealand and Australia has made Australia's domestic markets more accessible to New Zealand's exportable surplus production of dairy products (ABARE, 1991b). Australia's production costs are similar to those in NZ, but dairy products imported from NZ are relatively cheaper compared to Australia's dairy products sold on domestic markets. Limited domestic market capacity and the inaccessibility of other overseas markets for NZ's exportable excess production, are some of the factors that made NZ's dairy products relatively cheaper on the Australian domestic market.Ⅳ.EXPORT MARKET OPPORTUNITIES FOR AUSTXALIAN DAIRY PRODUCTS In 1997, Australian total real export value of dairy products was estimated at $ billion and recorded an increase of about per cent compared with 1996 . Australian exports of dairy products to . Asia and other Asian countries accounted for about 44 and 25 per cent of their total imports of dairy products, respectively and about 69 per cent of Australia's total exports of dairy products in 1996. Japan, the Philippines, Malaysia, Singapore,Thailand and Taiwan are the major importers of Australia's dairy products, and their imports account for about 55 per cent of Australia's total exports (ABARE, 1997).Japan, which is considered the number one Asian per capita consumer of dairy products, is the largest importer of dairy products in the Asian region. It is also the largest market for Australian dairy products and the major export market especially for Australian cheese. In 1996, its total imports of dairy products were estimated at thousands tonnes, and about 48 per cent of its total imports was purchased from Australia .Cheese accounted for about 22 per cent of Australia's total exports of dairy products in 1997, and exports to Japan accounted for about 48 per cent of Australia's total exports of cheese (ABARE, 1997). Under the Uruguay Round agreement on dairy products trade, Japan iscommitted to purchase a minimum of about 137,202 tonnes of dairy provides greater export market opportunities for Australian dairy products in the Japanese market. This is based on the assumption that Japan would take action to reduce any existing trade barriers under the proposed Asian Pacific Economic Cooperation (APEC) free trade agreement and the Uruguay (GATT) commitment.The bulk of Australia's dairy products are exported to the Asian countries, mainly due to Australia's geographical proximity to the region. The lower transportation costs have given Australia competitive advantage over other exporting countries. However, as a result of the recent financial crisis and political instability in some of the Asian countries, their economic growth is slowing down. Australia will need to give priority to export development to emerging markets in which it has competitive advantage. Australia has to diversify its export market base and focus on the markets in Africa, the Americas, Middle East, Europe, Russia, and the Pacific. The imports of dairy products of these countries accounted for about 12, 24, 11, 8 and 3 per cent of total world exports, respectively in 1996. Australia's exports of dairy products to these countries account for about , , , , and per cent of total world exp&, respectively during the same are also estimated at 20 per cent of the total consumption requirements. The preferential tariff agreement between China and Australia will remove the trade barriers for Australian dairy products exports to China (ADIC, 1996).Australia's exports to China accounted for about 5 per cent of China's total dairy products imports in 1996. There is also a scope for greater export market opportunities for Australian dairy products in S. Korea. It is estimated that per capita consumption of dairy products will rise from 45 kg in 1991-92 to more than 63 kg in 2000 (ADIC, 1996). The country is expected to liberalise its trade barriers under the Uruguay Round arrangement. Australia's exports of dairy products to S. Korea account for about per cent of Australia's total exports and per cent of S. Korea's total imports . The geographical proximity and quality of Australian dairy products will provide better opportunities for Australian exporters to have large market shares in the Chinese and S. Korean markets.Australian exports of dairy products to Europe mainly consist of cheese, and the Australian exports account for 5 per cent of Europe'stotal imports of cheese. However, after the implementation of the Uruguay Round agreement, Australia's exports to Europe increased at anaverage of over 30 per cent between 1995 and 1997 (ABARE,1997). Australia has to make efforts to establish markets in the EU member countries as the annual global EU quotas are increasing by 83,175 tonnes for cheese and curd, 67,933 for SMP and 10,000 tonnes for butter (ADC, 1997). Likewise, the USA has agreed to increase import levels for all major dairy products, and Australia has to compete in terms of quality and volume to increase its market share in the USA market.【摘要】关于澳大利亚的出口收入，奶制品出口变得愈来愈重要。
外文资料及中文译文模版
外文资料及中文译文作者姓名专业市场营销指导教师姓名张亦梅专业技术职务副教授外文资料的英文题目外文资料的作者英文名外文的正文由此开始[题目居中，采用四号Times New Roman字体，加黑；作者在题目正下方居中，采用四号Times New Roman字体；内容采用小四号Times New Roman字体，行间距为多倍行距1.25倍，作者与内容间隔一行。
]中文译文外文资料的中文题目中文译文的正文由此开始[中文资料与外文资料间隔两行，“中文译文”四个字用四号、黑体、加黑、居中；题目译文在“中文译文”四字正下方，用四号、黑体、加黑、居中；内容与题目间隔一行，一般不少于3000汉字，采用小四号宋体，行间距为多倍行距 1.25倍。
]营销08-姓名请仔细阅读以下内容：（1）、“外文资料”避免随意选取，要尽可能与所做课题紧密联系，严禁抄袭有中文译本的外文资料。
（2）外文资料可用Ａ4纸复印，如果打印，题目居中，采用四号Times New Roman字体，加黑；作者在题目正下方居中，采用四号Times New Roman字体；内容采用小四号Times New Roman字体，行间距为多倍行距1.25倍，作者与内容间隔一行。
（3）“中文译文”四个字用四号、黑体、加黑、居中；题目译文在“中文译文”四字正下方，用四号、黑体、加黑、居中；内容与题目间隔一行，一般不少于3000汉字，采用小四号宋体，行间距为多倍行距1.25倍。
（4）中英文资料扉页为论文扉页，将“论文题目”改为“外文资料及中文译文”，不用页眉，单独成册，外文资料在前，中文译文在后，中文资料与外文资料间隔两行，页码标注在右下角。
（5）在中文译文最后注明专业班级、姓名。
盐城师范学院毕业论文外文翻译
盐城师范学院毕业论文外文翻译学科教学知识的自我反思摘要本文报道了化学教师专注于学科教学知识自我反思的结果。
在这项研究中，通过课堂所教的学生和合作教师所反应的几个主题，主要包括化学教学大纲、某一化学课题的意义、学生学习的难点、教学实践、教学方法和评估技术几个方面。
本研究有意选择了15名学生进行教学。
通过数据的收集、思考和资料分析（主要是教师使用的教案）。
结果表明:在化学教学实践中的早期阶段，有经验的教师反映出的问题寥寥无几。
此外，他们只局限于一般性描述的问题。
然而，在教师提供指导之前，它发现关于学科教学知识的基本问题增加了，而且越来越严重。
1 序言许多教育研究人员认为，反思实践的一个最关键部分是教学大纲（齐佩，2010；波拉德等人；2008；霍华德，2003；Zeichner和利斯顿，1990）。
它被认为是作为一个认真而深入的、是否认真计划过或是否深思熟虑的过程（goethal，2004）和专注思维对话的能力，他们知道他们做的（哈顿和史密斯，1995）。
因此有必要进行反思的实践，为每位受训教师帮助他们在实施问题的过程中会阻碍有效教学和学习进行一个关键的分析（戴维斯，2006；实验室；2010；赖和米象，2010）。
按照舍恩（1987)的说法，反思性实践应在教学过程中的各个阶段进行实施。
他提出了两个层次的实践反思，即：在行动上的反思和在反思中的反思。
reflectiononaction指的是前反思和教学实施过程中所做的实践。
在行动中的反思是指在教学过程中发生的，即在实践中的反思。
克拉克（2008）指出，有效的教学只会批判性思考教学目标、教学方法和学生能力水平。
在这个过程中，教师能够掌握所提出的主题，但在教学实践中，却用学生学习的风格和主动发现的替代策略来克服所遇到的困难。
因此，未能实现的反思做法会影响教师的专业化和学生的学习成绩。
然而，在教学的各个主要方面和学习过程进行全面的思考是不容易的。
因此，教师应在发生在教学过程中的关键事件实现反思的过程。
外文资料翻译(模板)
毕业设计(论文)外文资料翻译学院：专业：姓名：学号：外文出处：附件： 1.外文资料翻译译文；2.外文原文。
附件1：外文资料翻译译文（空一行）（小4号字，1.25倍行距，居中）××××××（3号黑体，加粗，1.25倍行距，居中）J.R.Cho,S.J. Moon（Times New Roman字体，小4号字，1.25倍行距，居中，作者不译，不要作者工作单位）（空一行）（小4号字，1.25倍行距，居中）摘要（黑体，5号字，1.25倍行距）××××。
（摘要内容为宋体，5号字，1.25倍行距）关键字（黑体，5号字，1.25倍行距）××××××××（各关键词为宋体，5号字，1.25倍行距，段后0.5行，各词间用分号或一个汉字空格隔开）1 前言（各级标题均用黑体，加粗，小4号字，1.25倍行距，顶格）××××××××××××。
（正文均用宋体，小4号字，1.25倍行距）参考文献（见原文）（顶格，黑体，小4号字，1.25倍行距）（参考文献略去，不翻译，与正文间空一行）注意：1文中图表中（包括表头和图题），除符号外均要译成中文，一般为5号字，单倍行间距；表头和图题要处在表格的正上方和正下方，单位要用字母符号表示；要采用三线制表格。
2字母和数字应采用Times New Roman字体。
3物理量和希腊字母要采用斜体。
4最后一页要有“附件2：外文原文（复印件）”字样，且单独占一页。
5页边距按本模板。
附件2：外文原文（复印件）（注意：必须单独占一页）。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
盐城师范学院
毕业论文（设计）外文资料翻译
学院：（四号楷体_GB2312下同）
专业班级：
学生姓名：学号：
指导教师：
外文出处：(外文) (Times New Roman四号) 附件：1.外文资料翻译译文； 2.外文原文
1．外文资料翻译译文
译文文章标题
×××××××××正文×××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××…………。
*注：（本注释不是外文翻译的部分，只是本式样的说明解释）
1. 译文文章标题为三号黑体居中，缩放、间距、位置标准，无首行缩进，无左右缩进，且前空（四号）两行，段前、段后各0.5行间距，行间距为 1.25倍多倍行距；
2. 正文中标题为小四号，中文用黑体，英文用Times New Roman体，缩放、间距、位置标准，无左右缩进，无首行缩进，无悬挂式缩进，段前、段后0.5行间距，行间距为1.25倍多倍行距；
3. 正文在文章标题下空一行，为小四号，中文用宋体，英文用Times New Roman体，缩放、间距、位置标准，无左右缩进，首行缩进2字符（两个汉字），无悬挂式缩进，段前、段后间距无，行间距为1.25倍多倍行距；
4. 强行分页时请用插入分页符换页；
5. 正文中表格与插图的字体，中文部分一律用五号楷体_GB2312；表格用三线表。
2.外文原文。