汽车冲压件 英文名称
汽车零部件生产术语
汽车零部件生产术语
标题: 汽车零部件生产术语
1. 冲压 (Stamping): 将金属板材冲压成所需形状的工艺过程。
2. 焊接 (Welding): 利用高温将金属或合金材料熔化并连接的过程。
3. 铸造(Casting): 将熔融金属或合金倒入模具中,在其凝固后取出所需零件的工艺过程。
4. 机加工(Machining): 通过切削、镗孔、铣削等方式将金属、塑料等材料加工成所需形状。
5. 表面处理 (Surface Treatment): 如电镀、喷涂等工艺,为零件提供保护或装饰效果。
6. 装配 (Assembly): 将各个零部件按特定顺序组装在一起的过程。
7. 检测(Inspection): 对零部件进行尺寸、强度、外观等质量检测的过程。
8. 模具 (Mold/Die): 用于冲压、铸造等工艺的金属或合金模具。
9. 夹具 (Fixture): 用于固定工件进行加工或检测的工装夹具。
10. 自动化(Automation): 应用机器人、自动化生产线等先进技术实现自动化生产。
以上是汽车零部件生产中一些常见的术语和概念,旨在规范化生产流程,确保产品质量。
汽车冲压件---英文名称
SUSP-ARM-FIX-REINF REAR-FRONT-SUBFRAME-ATTACH-BRKT-LH REAR-FRONT-SUBFRAME-ATTACH-BRKT-RH REAR-BACK-SUBFRAME-ATTACH-BRACKET REAR-BACK-SUBFRAME-ATTACH-BRACKET ISO-FIX-BRACKET SUBFRAME-ATTACH-REINFORCEMENT-LH SUBFRAME-ATTACH-REINFORCEMENT-RH FRONT-RAIL-ATTACH-BRACKET-LH FRONT-RAIL-ATTACH-BRACKET-RH FRONT-BEAM-BUMPER FRONT-UPPER-CRASH-BOX-LH FRONT-UPPER-CRASH-BOX-RH FRONT-LOWER-CRASH-BOX-LH FRONT-LOWER-CRASH-BOX-RH REAR-RAIL-ATTACH-BRACKET FRONT-TOW-HOOK-BRACKET REAR-UPPER-CRASH-BOX-LH REAR-UPPER-CRASH-BOX-RH REAR-LOWER-CRASH-BOX-LH REAR-LOWER-CRASH-BOX-RH GEARBOX-LEVER-FIX-BRACKET FRONT-HANDBRAKE-FIX-BRACKET CENTRAL-FUEL-TANK-REINF REAR-RAIL-CROSSMEMBER FRONT-RAIL-EXTENSION-LOWER-BRKT FRONT-RAIL-EXTENSION-LOWER-BRKT-RH
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
汽车冲压件中英对照表
BAR FR END UPR 散热器上横梁BEAM RR BPR INR 后保防撞梁内板BEAM RR BPR OTR 后保防撞梁外板BRACE RR SHELF LH 后行李箱隔板左侧支柱BRACE RR SHELF RH 后行李箱隔板右侧支柱BRACE RR. FLOOR SIDE LH 后地板左边支柱BRACE RR. FLOOR SIDE RH 后地板右边支柱BRACE S/MBR TO FRT FLOOR LH 前纵梁与前地板左连接板BRACKET HOOD RELEASE (LHD) 发罩拉索支架BRACKET RR FLOOR SEAT MTG LH 左后座椅安装支架BRACKET RR FLOOR SEAT MTG RH 右后座椅安装支架BRK S-IMPACT RR FR DR LH 前门防撞杆后支架BRKT ANTI ZIPPER LH 前地板与门槛内板左连接板BRKT BUMPER 前保险杠支架BRKT CTR BPR MTG 后保险杠中部支架BRKT FASCIA MTG 保险杠安装支架BRKT FENDER LWR LH 左侧前轮挡泥板下部支架BRKT FENDER LWR RH 右侧前轮挡泥板下部支架BRKT FENDER UPR LH 左侧前轮挡泥板上部支架BRKT FENDER UPR RH 左侧前轮挡泥板上部支架BRKT FOOT REST (LHD) 踏脚板支架BRKT GLS GUIDE DOOR 玻璃导轨支架BRKT S-IMPACT CTR FR DR 前门防撞杆中支架BRKT S-IMPACT FR FR DR LH 前门防撞杆前支撑板BRKT S-IMPACT FR FR DR RH 前门防撞杆前支撑板BRKT S-IMPACT FR RR DR LH 左后门侧防撞杆前支架BRKT STRIKER 背门锁扣加强板BRKT SUPT S-IMPACT RR DR LH 左后门侧防撞杆支架BRKT SUPT S-IMPACT RR DR RH 右后门侧防撞杆支架BRKT UPR BUMPER MTG 保险杠安装上支架BRKT ENG MOUNT 发动机悬置支架BRKT SPRING HOUSE RH 右前悬挂上支座BRKT FUEL TANK COMMON 油箱安装左后支架BRKT TRAILING ARM INR LH 左后悬挂纵臂安装内支架BRKT TRAILING ARM INR RH 右后悬挂纵臂安装内支架BRKT TRAILING ARM OTR LH 左后悬挂纵臂外支架BRKT TRAILING ARM OTR RH 右后悬挂纵臂外支架BULKHEAD HINGE FRT LWR LH 左侧前门下部铰链加强板隔板BULKHEAD HINGE FRT LWR RH 右侧前门下部铰链加强板隔板BULKHEAD R/FLR S/MBR LH 后地板左纵梁隔板BULKHEAD R/FLR S/MBR RH 后地板右纵梁隔板BULKHEAD SILL 门槛隔板C/MBR BACKBONE 中央通道横梁C/MBR FR END OTR 散热器下横梁外板C/MBR R/FLR 后地板中横梁C/MBR R/SEAT 后地板前横梁下板C/MBR F/FLR LH 前地板左前横梁C/MBR F/FLR RH 前地板右前横梁C/MBR F/FLR RR LH 前地板左后横梁C/MBR FR END, INR CTR 散热器下横梁中内板C/MBR FR END, INR LH 散热器下横梁左内板CHNL GLS GUIDE FR FR DR LH 左前门玻璃导轨CHNL GLS GUIDE FR FR DR RH 右前门玻璃导轨CHNL GLS GUIDE FR RR DR LH 左后门玻璃导轨CHNL GLS GUIDE FR RR DR RH 右后门玻璃导轨CHNL GLS GUIDE RR FR DR RH 右前门后玻璃导轨CHNL GLS GUIDE UPR RR DR LH 左后门上玻璃导轨CHNL GLS GUIDE UPR RR DR RH 右后门上玻璃导轨EXT DASH PANEL LH 前围挡板左下板EXT DASH PANEL RH 前围挡板右下板EXT C/MBR R/FLR LH 后地板中横梁与纵梁左连接板FRAME FR UPR INR LH 左翼子板加强梁内板FRAME FR UPR INR RH 右翼子板加强梁内板FRAME FR UPR OTR LH 左侧翼子板上部边梁外板FRAME FR UPR OTR RH 右侧翼子板上部边梁外板FRONT S/MBR REAR LH 左前纵梁与地板纵梁连接板FRONT, S/MBR REAR RH 右前纵梁与地板纵梁连接板HINGE FUEL FILLER DR 加油口盖铰链HOOK, MUFFLER B/BONE 中央通道消音器挂钩PANEL A PILLAR LWR LH 左A柱下板PANEL A PILLAR LWR RH 右A柱下板PANEL AIR EXTRACTION BOX OTR LH 左侧排气盒外板PANEL AIR EXTRACTION BOX OTR RH 右侧排气盒外板PANEL B PILLAR INNER LH 左侧B柱盖板PANEL B PILLAR INNER LH 左侧B柱内板PANEL B PILLAR INNER RH 右侧B柱盖板PANEL B PILLAR INNER RH 右侧B柱内板PANEL BODY SIDE OTR LH 左侧围外板PANEL BODY SIDE OTR RH 右侧围外板PANEL CANTRAIL INNER LH 左侧上边梁内板PANEL CANTRAIL INNER RH 右侧上边梁内板PANEL COWL TOP INR (LHD) 空气盒内板PANEL EXT REAR FLR FRT 后地板前连接板PANEL EXT REAR FLR RR 后地板后加强板PANEL FRONT FENDER LH 左前翼子板PANEL FRONT FENDER RH 右前翼子板PANEL FRT HEADER LWR 顶盖前横梁下部板PANEL PILLAR FR INR LH 左A柱内板PANEL PILLAR FR INR LH 左侧A柱内板PANEL PILLAR FR INR RH 右A柱内板PANEL PILLAR FR INR RH 右侧A柱内板 PANEL REAR FLOOR 后地板PANEL REAR SHELF 行李架隔板PANEL REINF FRT HINGE A PILLAR LH 左侧A柱铰链加强板PANEL REINF FRT HINGE A PILLAR RH 右侧A柱铰链加强板PANEL ROOF 顶盖PANEL ROOF BOW 顶盖中横梁PANEL RR END INR 后围内板PANEL RR END OTR 后围横梁外板PANEL RR HEADER UPR 顶盖后横梁上板PANEL RR QTR INR LWR LH 左后轮罩外板下段PANEL RR QTR INR LWR RH 右后轮罩外板下段PANEL RR QTR INR UPR LH 左后轮罩外板上段PANEL RR QTR INR UPR RH 右后轮罩外板上段PANEL RR. W/HSE INR LH 左轮罩内板PANEL RR. W/HSE INR RH 右轮罩内板PANEL SILL INR LH 前地板左门槛内板PANEL SILL INR LH 左门槛内板PANEL SILL INR RH 前地板右门槛内板PANEL SILL INR RH 右门槛内板PANEL SPRING HOUSE LH 左前悬挂支座下板PANEL SPRING HOUSE RH 右前悬挂支座下板PANEL COWL TOP OTR 空气盒外板PANEL DASH (LHD) 前围挡板PNL FR DR INR LH 左前门内板PNL FR DR INR RH 右前门内板PNL FR DR OTR LH 左前门外板PNL FR DR OTR RH 右前门外板PNL FUEL FILLER DR 加油口盖外板PNL HOOD INR 发罩内板PNL HOOD OTR 发罩外板PNL RR DR INR LH 左后门内板PNL RR DR INR RH 右后门内板PNL RR DR OTR LH左后门外板PNL RR DR OTR RH 右后门外板PNL T-GATE INR 后背门内板PNL T-GATE OTR 后背门外板PNL TRUNK LID INR 行李箱盖内板PNL TRUNK LID OTR 行李箱盖外板PNL SPRING HOUSE LH 左后悬挂支座下板PNL SPRING HOUSE RH 右后悬挂支座下板REINF A PILLAR UPR LH 左侧A柱上部加强板REINF A PILLAR UPR RH 右侧A柱上部加强板REINF B PILLAR CTR LH 左B柱中加强板REINF B PILLAR CTR RH 右B柱中加强板REINF B PILLAR DOUBLER LH 左侧B柱铰链加强板REINF B PILLAR DOUBLER RH 右侧B柱铰链加强板REINF B PILLAR LH 左侧B柱加强板REINF B PILLAR RH 右侧B柱加强板REINF B PILLAR UPR LH 左侧B柱加强上段REINF B PILLAR UPR RH 右侧B柱加强上段REINF BRACE REAR SHELF LH 行李箱隔板左托架支柱REINF BUMP STOP RH 右侧缓冲器加强板REINF BUMPER STAY LH 后保险杠左缓冲支柱加强板REINF BUMPER STAY RH 后保险杠右缓冲支柱加强板REINF COWL TOP INR (LHD) 转向柱加强板REINF DASH PANEL CTR 前围挡板下加强板REINF DOOR CHECK LH 左侧前门限位器加强板REINF FR END C/MBR SIDE LH 散热器下横梁左侧加强板REINF FRAME UPR FR DR LH 左前门窗框加强板REINF FRAME UPR FR DR RH 右后门窗框加强板REINF FRAME UPR FR DR RH 右前门窗框加强板REINF FRAME UPR RR DR LH 左后门窗框加强板REINF FUEL FILLER DR 加油口盖加强板REINF HINGE FRT UPR LH 左侧前门上部铰链加强板REINF HINGE FRT UPR RH 右侧前门上部铰链加强板REINF HINGE RR DR LH 左后门铰链加强板REINF HINGE RR DR RH 右后门铰链加强板REINF HINGE T-LID LH 行李箱盖铰链左加强板REINF HINGE T-LID RH 行李箱盖铰链右加强板REINF HOOD HINGE LH 发动机罩左侧铰链加强板REINF LATCH FR DR LH 左前门锁加强板REINF LATCH FR DR RH 右前门锁加强板REINF LATCH RR DR RH 右后门锁加强板REINF REAR SHELF FRONT 行李架前加强板REINF SBELT SIDE LH 左前座安全带左下加强板REINF SBELT SIDE RH 左前座安全带左下加强板REINF SILL LH 左侧门槛加强板REINF SILL RH 右侧门槛加强板REINF STG COL BRKT (LHD) 转向柱支架REINF WAIST OTR RR DR RH 右后门窗沿外加强板REINF BACKBONE 中央通道加强板REINF ENG MOUNT 发动机悬置加强板REINF FR END C/MBR 散热器下横梁加强板REINF FR S/MBR INR, FR LH 左前纵梁内板前加强板REINF FR S/MBR INR, FR RH 右前纵梁内板前加强板REINF FR S/MBR INR, RR LH 左前纵梁内板后加强板REINF FR S/MBR OTR LH 左前纵梁外板加强板REINF FR S/MBR OTR REAR LH 左前纵梁外板后加强板REINF FR S/MBR OTR REAR RH 右前纵梁外板后加强板REINF FRT S/MBR, REAR LH 左前纵梁地板纵梁加强板REINF T/M MOUNT 变速箱悬置加强板REINF DASH PANEL (LHD) 前围挡板内加强板REINF R/FLR LH 后地板左加强板REINF R/FLR RH 后地板右加强板REINF C/MBR UPR LH 后地板前横梁下板左加强板REINF C/MBR UPR RH 后地板前横梁下板右加强板REINF R/FLR S/MBR FR LH 后地板左纵梁加强板REINF R/FLR S/MBR FR RH 后地板右纵梁加强板REINF R/FLR S/MBR LH 后地板左纵梁侧加强板REINF R/FLR S/MBR RH 后地板右纵梁侧加强板REINF S/BELT R/FLR 后座椅安全带内加强板S/MBR FR FLR LH 前地板左纵梁S/MBR FR FLR RH 前地板右纵梁S/MBR FR INR LH 左前纵梁内板S/MBR FR INR RH 右前纵梁内板S/MBR FR OTR LH 左前纵梁外板S/MBR FR OTR RH 右前纵梁外板SHIELD FR FENDER LH 左前挡泥板SHIELD FR FENDER RH 右前挡泥板SMBR RR FLR LH 后地板左纵梁SMBR RR FLR RH 后地板右纵梁SUPT R/FLR S/MBR LH 后地板左纵梁支架。
冲压专业英语
组装、冲压、喷漆等专业词汇Assembly line组装线L a y o u t布置图Conveyer流水线物料板R i v e t t a b l e拉钉机R i v e t g u n拉钉枪S c r e w d r i v e r起子Electric screw driver电动起子Pneumatic screw driver 气动起子w o r k t a b l e工作桌O O B A开箱检查fit together组装在一起f a s t e n锁紧(螺丝) f i x t u r e夹具(治具) p a l l e t栈板b a r c o d e条形码barcode scanner条形码扫描仪f u s e t o g e t h e r熔合f u s e m a c h i n e热熔机r e p a i r修理o p e r a t o r作业员Q C品管s u p e r v i s o r课长M E制造工程师M T制造生技cosmetic inspect外观检查inner parts inspect内部检查thumb screw大头螺丝l b s.i n c h镑、英寸E M I g a s k e t导电条f r o n t p l a t e前板r e a r p l a t e后板chassis |'∫æsi| 基座b e z e l p a n e l面板power button电源按键r e s e t b u t t o n重置键Hi-pot test of SPS高源高压测试Voltage switch of SPS电源电压接柆键sheet metal parts 冲件p l a s t i c p a r t s塑料件S O P制造作业程序material check list物料检查表w o r k c e l l工作间t r o l l e y台车c a r t o n纸箱s u b-l i n e支线l e f t f o r k叉车p e r s o n n e l r e s o u r c ed e p a r t m e n t人力资源部production department生产部门planning department企划部Q C S e c t i o n品管科stamping factory冲压厂painting factory烤漆厂molding factory成型厂common equipment常用设备u n c o i l e r a n d s t r a i g h t e n e r整平机punching machine 冲床r o b o t机械手hydraulic machine油压机l a t h e车床|刨床«plane r |'plein m i l l e r铣床g r i n d e r磨床d r i l l e r钻床li ne ar cu ttin g线切割electrical sparkle电火花w e l d e r电焊机staker=reviting machine 铆合机p o s i t i o n职务p r e s i d e n t董事长general manager总经理s p e c i a l a s s i s t a n tm a n a g e r特助factory dire ctor厂长department director部长d e p u t y m a n a g e r|'d e p j u t i|=v i c em a n a g e r副理section supervisor课长d e p u t y s e c t i o nsupervisor =vice sections u p e r i s o r副课长group leader/supervisor组长l i n e s u p e r v i s o r线长assistant manager助理to move, to carry, toh a n d l e搬运be put in storage入库p a c k p a c k i n g包装t o a p p l y o i l擦油t o f i l e b u r r锉毛刺f in al i ns pe cti on终检to connect material接料to reverse material 翻料w e t s t a t i o n沾湿台T i a n a天那水c l e a n i n g c l o t h抹布to load material上料to unload material卸料to return material/stockt o退料scraped |'skræpid|报废s c r a p e..v.刮;削deficient purchase来料不良manufacture procedure制程deficient manufacturingp r o c e d u r e制程不良o x i d a t i o n|'n|氧化«k s i'd e is c r a t c h刮伤d e n t s压痕defective upsiding down 抽芽不良defective to staking铆合不良m p|镶块Ùe m b e d e d l u m p|i n'b e d||l feeding is not in place送料不到位stamping-missing漏冲production capacity生产力education and training教育与训练proposal improvement提案改善spare parts=buffer备件f o r k l i f t叉车trailer=long vehicle拖板车c o m p o u nd d i e合模d ie l o c k e r锁模器pressure plate=plate p i n c h压板b o l t螺栓name of a department部门名称administration/generala f f a i r s d e p t总务部automatic screwdriver电动启子thickness gauge厚薄规g a u g e(o r j i g)治具p o w e r w i r e电源线b u z z l e蜂鸣器defective product label不良标签identifying sheet list标示单screwdriver holder起子插座p e d a l踩踏板s t o p p e r阻挡器f l o w b o a r d流水板hydraulic handjack油压板车f o r k l i f t叉车p a l l e t栈板g l o v e(s)手套glove(s) with exposedf i ng e r s割手套t h u m b大拇指f o r e f i ng e r食指m i d f i n g e r中指r i n g f i n g e r无名指l i t t l e f i n g e r小指b a n d-a i d创可贴iudustrial alcohol工业酒精alcohol container沾湿台head of screwdriver起子头s w e e p e r扫把m o p拖把vaccum cleaner吸尘器r a g抹布garbage container灰箕g a r b a g e c a n垃圾箱g a r b a g e b a g垃圾袋c h a i n链条j a c k升降机production line流水线c h a i n链条槽m a g n e t i z e r加磁器l a m p h o l d e r灯架to mop the floor拖地to clean the floor扫地to clean a table擦桌子a i r p i p e气管packaging tool打包机p a c k a g i n g打包m i s s i n g p a r t漏件w r o n g p a r t错件excessive defects过多的缺陷critical defect极严重缺陷major defect主要缺陷minor defect次要缺陷not up to standard不合规格dimension/size is a littleb i g g e r尺寸偏大(小)cosmetic defect外观不良s l i p p e ds c r e w h e a d/s l i p p e r ys cre w h e a d螺丝滑头s l i p p e ds cre wh e ad/sh ipperys c r e w t h r e a d滑手s p e c k l e斑点mildewed=moldy=mould y发霉r u s t生锈d e f o r m a t i o n变形burr(金属)flash(塑件)毛边poor staking铆合不良excesssive gap间隙过大grease/oil stains油污i n c l u s i o n杂质painting peel off脏污shrinking/shrinkage缩水m i x e d c o l o r杂色s c r a t c h划伤poor processing 制程不良poor incoming part事件不良fold of pakaging belt打包带折皱painting make-up补漆d i s c o l o r a t i o n羿色w a t e r s p o t s水渍p o l i s h i n g/s u r f a c ep r o c e s s i n g表面处理exposed metal/barem e t a l金属裸露lack of painting烤漆不到位s a f e t y安全q u a l i t y品质delivery deadline交货期c o s t成本e n g i n e e r i n g工程d ie r e p a i r模修e n t e r p r i s e p l a n= enterprise expansion p r o j e c t s企划Q C品管d i e w o r k e r模工production, to produce 生产e q u i p m e n t设备to start a press开机stop/switch off a press关机c l a s s i f i c a t i o n整理r e g u l a t i o n整顿c l e a n n e s s清扫c o n s e r v a t i o n清洁c u l t u r e教养q u a l i f i ed p r o d u c t s, up-to-grade products良品defective products, not up-to-grade products不良品w a s t e废料b o a r d看板f e e d e r送料机s l i d i n g r a c k滑料架defective product box不良品箱d ie c h a n g e换模t o f i x a d i e装模to take apart a die拆模t o re p a i r a d i e修模packing material包材b a s k e t蝴蝶竺p l a s t i c b a s k e t胶筐isolating plate baffleplate; barricade隔板c a r t o n b o x纸箱to pull and stretch拉深to put material in place,to cut material, to input落料to impose lines压线t o c o m p r e s s,c o m p r e s s i n g压缩c h a r a c t e rd i e字模to feed, feeding送料t r a n s p o r t a t i o n运输(be)qu alf ie d, u p tog r a d e合格not up to grade, notq u a l i f i e d不合格material change, stockc h a n g e材料变更feature change 特性变更e v a l u a t i o n评估p r e p a r e f o r,m a k epreparations for 准备p a r a m e t e r s参数r o t a t i n g s p e e d,r e v o l u t i o n转速m a n u f a c t u r emanagement制造管理abnormal handling异常处理production unit生产单位lots of production生产批量s t e e l p l a t e钢板r o l l m a t e r i a l卷料manufacture procedure 制程operation procedure作业流程to revise, modify修订t o s w i t c h o v e r t o, switch---to throw--over s w i t c h i n g o v e r切换engineering, project d i f f i c u l t y工程瓶颈s t a g e d i e工程模a u t o m a t i o n自动化t o s t a k e,s t a k i n g, r e v i t i n g铆合add lubricating oil加润滑油s h u t d i e架模shut height of a die架模高度analog-mode device类模器d ie l if t e r举模器a r g o n w e l d i n g氩焊vocabulary for stamping冲压常词汇stamping, press冲压punch press, dieing outp r e s s冲床uncoiler & strainghtener整平机f e e d e r送料机rack, shelf, stack料架c y l i nde r油缸r o b o t机械手t a k e r取料机conveye r be lt输送带transmission rack输送架t o p s t o p上死点b o t t o m s t o p下死点o n e s t r o k e一行程i n c h寸动to continue, cont.连动to grip(material)吸料location lump, locatingpiece, block stop 定位块r e s e t复位s m o o t h l y顺利d e n t压痕s c r a t c h刮伤d e f o r m a t i o n变形f i l i ng s铁削t o d r a w h o l e s抽孔inquiry, search for查寻to stock, storage, ins t o c k库存r e c e i v e领取approval examine andv e r i f y审核processing, to process加工delivery, to deliver 交货to return delivenry to. to send delinery back to r e t r n o f g o o d s退货r e g i s t r a t i o n登记registration card登记卡t o c o n t r o l管制to put forward and hand i n提报s a f e s t o c k安全库存acceptance = receive验收t o n o t i c e通知application form for p u r c h a s e请购单consume, consumption 消耗t o f i l l i n填写a b r a s i o n磨损reverse angle = chamfer 倒角c h a r a c t e r d i e字模to collect, to gather收集f a i l u re,t ro u b l e故障s t a t i s t i c s统计demand and supply需求c a r e e r c a r d履历卡to take apart a die卸下模具to load a die装上模具to tight a bolt拧紧螺栓to looser a bolt拧松螺栓to move away a die plate移走模板easily damaged parts易损件standard parts标准件breaking.(be)broken,(be)c r a c k e d断裂t o l u b r i c a t e润滑common vocabulary fordie engineering模具工程常用词汇d i e模具figure file, chart file图档cutting die, blanking die冲裁模progressive die, follow(-o n)d i e连续模compound die复合模p u n c h e d h o l e冲孔p a n e l b o a r d镶块t o c u t e d g e s=s i d ec u t=s ide s c r a p切边t o b e n d i n g折弯to pull, to stretch拉伸Line strechin g, li nep u l l i n g线拉伸engraving, to engrave刻印upsiding down edges翻边t o s t a k e铆合designing, to design设计design modification设计变化d i e b l o c k模块f o l d e d b l o c k折弯块s l i d i n g b l o c k滑块l o c a t i o n p i n定位销l i f t i n g p i n顶料销die plate, front board模板p a d d i n g b l o c k垫块s t e p p i n g b a r垫条upper die base上模座lower die base下模座upper supporting blank 上承板upper padding plate b l a n k上垫板s p a r e d i e s模具备品s p r i n g弹簧b o l t螺栓document folder活页夹f i l e f o l d e r资料夹to put file in order整理资料spare tools location手工备品仓f i r s t c o u n t初盘人f irst check初盘复棹人second count 复盘人second check复盘复核人e q u i p m e n t设备waste materials废料work in progress product在制品c a s i n g=containerazation装箱quantity of physicalinvetory second count复盘点数量quantity of customsc o u n t会计师盘,点数量the f irst page第一联f ile d by accou n tin gd e p a r t m e n t f o rre f e re n ce会计部存查e n d-u s e r/u s i n gunit(department)使用单位summary of year-endphysical inventory bills年终盘点截止单据汇总表b i l l n a m e单据名称This sheet and physicalinventory list will be sentt o a c c o u n t i n gdepartment together(Those of NHK will bes e n t t o f i n a n c i a ld e p a r t m e n t)本表请与盘点清册一起送会计部－(NHK厂区送财会部)A p p l i c a t i o n s t a t u srecords of year-endphysical inventory List and physical inventory card 年终盘点卡与清册使用－状况明细表blank and waste sheet N O. 空白与作废单号p l a t e电镀m o l d成型material for engineering mold testing工程试模材料not included in physical i n v e n t o r y不列入盘点s a m p l e样品incoming material to be i n s p e c t e d进货待验d e s c r i p t i o n品名steel/rolled steel钢材material statistics sheet 物料统计明细表meeting minutes会议记录m e e t i n g t y p e会别distribution department分发单位l o c a t i o n地点c h a i r m a n主席present members出席人员s u b j e c t主题c o n c l u s i o n结论decision items决议事项responsible department负责单位pre-fixed finishing date预定完成日approved by / checkedby / prepared by核准/审核/承办P C E a s s e m b l yproduction schedules h e e tPCE组装厂生产排配表m o d e l机钟w o r k o r d e r工令r e v i s i o n版次r e m a r k备注p r o d u c t i o n c o n t r o lconf irmation生产确认c h e c k ed b y初审a p p r o v e db y核准d e p a r t m e n t部门stock age analysis sheet库存货龄分析表on-hand inventory现有库存available material良品可使用obsolete material良品已呆滞t o b e i n s p e c t e d o rr e w o r k e d待验或重工t o t a l合计cause description原因说明part number/ P/N 料号t y p e形态item/group/class类别q u a l i t y品质p r e p a r e d b y制表n o t e s说明y e a r-e n d p h y s i c a l inventory difference a n a l y s i s s h e e t 年终盘点差异分析表physical inventory盘点数量physical count quantity 账面数量difference quantity差异量cause analysis原因分析r a w m a t e r i a l s原料m a t e r i a l s物料f inished product成品semi-finished product半成品packing materials包材good product/acceptedg o o d s/a c c e p t e dparts/good parts良品d e f e c t i v eproduct/non-good parts不良品disposed goods处理品w a r e h o u s e/h u b仓库on way location在途仓oversea location海外仓spare parts physicalinventory list备品盘点清单spare molds location模具备品仓s k i d/p a l l e t栈板t o x m a c h i n e自铆机w i r e E D M线割E D M放电机c o i l s t o c k卷料s h e e t s t o c k片料t o l e r a n c e工差s c o r e=g r o o v e压线c a m b l o c k滑块p i l o t导正筒t r i m剪外边p i e r c e剪内边d r a g f o r m压锻差pocket for the punchh e a d挂钩槽s l u g h o l e废料孔f e a t u r e d i e公母模expansion dwg展开图r a d i u s半径s h i m(w e d g e)楔子torch-flame cut火焰切割s e t s c r e w止付螺丝f o r m b l o c k折刀s t o p p i n定位销round pierce punch=dieb u t t o n圆冲子shape punch=die insert异形子stock locater block定位块u n d e r c u t=s c r a p c h o p p e r清角a c t i v e p l a t e活动板b a f f l e p l a t e挡块c o v e r p l a t e盖板m a l ed i e公模fe m a l e d i e母模groove punch压线冲子air-cushion eject-rod气垫顶杆spring-box eject-plate弹簧箱顶板b u s h i n g b l o c k衬套i n s e r t入块c l u b c a r高尔夫球车c a p a b i l i t y能力p a r a m e t e r参数f a c t o r系数p h o s p h a t e皮膜化成v i s c o s i t y涂料粘度a l k a l i d i p p i n g脱脂main manifold主集流脉b e z e l斜视规b l a n k i n g穿落模d e j e c t i n g顶固模demagnetization去磁;消磁high-speed transmission高速传递heat dissipation热传r a c k上料d e g r e a s e脱脂r i n s e水洗a l k a l i n e e t c h龄咬d e s m u t剥黑膜D.I.r i n s e纯水次C h r o m a t e铬酸处理A n o d i z e阳性处理s e a l封孔r e v i s i o n版次part number/P/N料号g o o d p r o d u c t s良品scraped products报放心品defective products不良品f inished products成品disposed products处理品b a rc od e条形码f l o w c h a r t流程窗体a s s e mb l y组装s t a m p i n g冲压m o l d i n g成型spare parts=buffer备品c o o rd i n a t e坐标dismantle the die折模auxiliary fuction辅助功能p o l y-l i n e多义线h e a t e r b a n d加热片t h e r m o c ou p le热电偶s a n d b l a s t i n g喷沙g r i t砂砾derusting machine除锈机d e g a t e打浇口d r y e r烘干机i n d u c t i o n感应induction light感应光response=reaction=inte r a c t i o n感应r a m连杆e d g e f i n d e r巡边器c o n c a v e凸c o n v e x凹s h o r t射料不足n i c k缺口s p e c k瑕疪s h i n e亮班s p l a y银纹g a s m a r k焦痕d e l a m i n a t i o n起鳞c o l d s l u g冷块b l u s h导色g o u g e沟槽;凿槽satin texture段面咬花w i t n e s s l i n e证示线p a t e n t专利g r i t沙砾granule=peuet=grain细粒g r i t m a k e r抽粒机c u s h i o n缓冲m a g n a l i u m镁铝合金m a g n e s i u m镁金m e t a l p l a t e钣金l a t h e车m i l l锉p l a n e刨g r i n d磨d r i l l铝b o r i n g镗b l i n s t e r气泡f i l l e t镶;嵌边through-hole form通孔形式voller pin formality滚针形式c a md r i ve r铡楔s h a n k摸柄c r a n k s h a f t曲柄轴augular offset角度偏差v e l o c i t y速度production tempo生产进度现状t o r q u e扭矩spline=the multiple keys花键q u e n c h i n g淬火t e m p e r i n g回火a n n e a l i n g退火c a r b o n i z a t i o n碳化a l l o y合金tungsten high speeds t e e l钨高速的moly high speed steel钼高速的organic solvent有机溶剂b r ac k e t小磁导l i a i s o n联络单v o l a t i l e挥发性r e s i s t a n c e电阻i o n离子t i t r a t o r滴定仪b e ac o n警示灯c o o l a n t冷却液c r u s h e r破碎机模具工程类p l a i nd i e简易模p ie r c e d i e冲孔模f o r m i ng d i e成型模progressive die连续模g a n g d i e s复合模sh e a ri n g d i e剪边模r i v e t i n g d i e铆合模p i e r c e冲孔forming成型(抽凸,冲凸) d r a w h o l e抽孔b e n d i n g折弯t r i m切边e m b o s s凸点d o m e凸圆s e m i-s h e a r i n g半剪s t a m p m a r k冲记号deburr or coin压毛边punch riveting冲压铆合side stretch侧冲压平reel stretch卷圆压平g r o o v e压线b l a n k i n g下料stamp letter冲字(料号)s h e a r i n g剪断tick-mark nearside正面压印tick-mark farside反面压印冲压名称类extension dwg展开图procedure dwg工程图die structure dwg模具结构图m a t e r i a l材质material thickness料片厚度f a c t o r系数u p w a r d向上d o w n w a r d向下press specification冲床规格die height range适用模高d ie h e i g h t闭模高度b u r r毛边g a p间隙w e i g h t重量t o t a l w t.总重量p u n c h w t.上模重量五金零件类inner guiding post内导柱inner hexagon screw内六角螺钉d o we l p i n固定销c o i l s p r i n g弹簧l i f t e r p i n顶料销eq-height sleeves=spool 等高套筒p i n销lifter guide pin浮升导料销g u i d e p i n导正销w i re s p r in g圆线弹簧outer guiding post外导柱s t o p s c r e w止付螺丝l o c a t e d p i n定位销o u t e r b u s h外导套模板类top plate上托板（顶板）t o p b l o c k上垫脚p u n c h s e t上模座p u n c h p a d上垫板p u n c h h o l d e r上夹板stripper pad脱料背板u p s t r i p p e r上脱料板m a l e d i e公模(凸模) f e a t u r e d i e公母模female die母模(凹模)u p p e r p l a t e上模板l o w e r p l a t e下模板d ie p a d下垫板d ie h o l d e r下夹板d ie s e t下模座b o t t o m b l oc k下垫脚bottom plate下托板(底板)stripping plate内外打(脱料板)outer stripper外脱料板inner stripper内脱料板lower stripper下脱料板零件类p u n c h冲头i n s e r t入块(嵌入件)deburring punch压毛边冲子groove punch压线冲子stamped punch字模冲子r o u n d p u n c h圆冲子special shape punch异形冲子b e n d i n g b l oc k折刀r o l l e r滚轴b a f f l e p l a t e挡块l o ca te d bl o ck定位块supporting block forl o c a t i o n定位支承块air cushion plate气垫板air-cushion eject-rod气垫顶杆trimming punch切边冲子stiffening rib punch =s t i n g e r加强筋冲子ribbon punch压筋冲子reel-stretch punch卷圆压平冲子g u i d e p l a t e定位板s l i d i n g b l o c k滑块sliding dowel block滑块固定块a c t i v e p l a t e活动板lower sliding plate下滑块板upper holder block上压块upper mid plate上中间板s p r i n g b o x弹簧箱spring-box eject-rod弹簧箱顶杆spring-box eject-plate弹簧箱顶板b u s h i n g b o lc k衬套c o v e r p l a t e盖板g u ide p a d导料块塑件&模具相关英文compre sion molding压缩成型 flash mold溢流式模具 plsitive mold挤压式模具split mold分割式模具c a v i t y型控母模c o r e模心公模t a p e r锥拔l e a t h e r c l o a k仿皮革s h i v e r饰纹f l o w m a r k流痕we l di n g m ark溶合痕post screw insert螺纹套筒埋值self tapping screw自攻螺丝s t r i p e r p l a t e脱料板p i s t o n活塞c y l i nde r汽缸套c h i p细碎物handle mold手持式模具移转成型用模具encapsulation molding低压封装成型射出成型用模具two plate两极式（模具）w e l l t y p e蓄料井insulated runner绝缘浇道方式h o t r u n n e r热浇道r u n n e r p l a t浇道模块v a l v e g a t e阀门浇口band heater环带状的电热器s p i n d l e阀针s p e a r h e a d刨尖头s l a g w e l l冷料井c o ld s l a g冷料渣a i r v e n t排气道h=0.02~0.05m mw=3.2m mL=3~5m mw e l d i n g l i n e熔合痕e j e c t p i n顶出针k n o c k p i n顶出销return pin回位销反顶针s l e a v e套筒stripper plate脱料板i n s e r t c o r e放置入子runner stripper plate浇道脱料板g u i d e p i n导销eject rod (bar)（成型机）顶业捧s u b z e r o深冷处理three plate三极式模具runner system浇道系统stress crack应力电裂o r i e n t a t i o n定向sprue gate射料浇口，直浇口n o z z l e射嘴sprue lock pin料头钩销(拉料杆) s l a g w e l l冷料井s i d e g a t e侧浇口e d g e g a t e侧缘浇口t a b g a t e搭接浇口f i l mg a t e薄膜浇口f l a s hg a t e闸门浇口s l i t g a t e缝隙浇口f a ng a t e扇形浇口dis h g a te因盘形浇口H=F=1/2t~1/5tT=2.5~3.5m mdiaphragm gate隔膜浇口r i n g g a t e环形浇口subarine gate潜入式浇口tunnel gate隧道式浇口p i n g a t e针点浇口Φ0.8~1.0m mR u n n e r l e s s无浇道(sprue less)无射料管方式long nozzle延长喷嘴方式s p r u e浇口;溶渣品质人员名称类QC quality control 品质管理人员FQC final quality control终点质量管理人员IPQC in process qualitycontrol 制程中的质量管理人员O Q C ou tpu t qu al itycontrol 最终出货质量管理人员IQC incoming qualitycontrol 进料质量管理人员TQC total quality control全面质量管理POC passage qualityc o n t r o l段检人员QA quality assurance 质量保证人员O Q A ou tpu t qu al ityassurance 出货质量保证人员QE quality engineering 品质工程人员品质保证类F A I f i r s t a r t i c l e inspection 新品首件检查F A A f i r s t a r t i c l e a s s u r a n c e首件确认TVR tool verif ication r e p o r t模具确认报告3B 3B 模具正式投产前确认CP capability index 能力指数CPK capability index of process 模具制程能力参数S S Q A s t a n d a r d i z e d supplier quality 合格供货商品质评估OOBA out of box audit 开箱检查QFD quality functiondeployment 品质机能展开FMEA failure modeleffectiveness analysis失效模式分析8 disciplines 8项回复内容FA final audit 最后一次稽核CAR corrective actionrequest 改正行动要求corrective action report改正行动报告F Q C运作类AQL Acceptable QualityLevel 运作类允收品质水准S/S Sample size 抽样检验样本大小A C C A c c e p t允收R E E R e j e c t拒收CR Critical 极严重的M A J M a j o r主要的M I N M i n o r轻微的AOQ Average OutputQuality 平均出厂品质AOQL Average OutputQuality Level 平均出厂品质Q/R/SQuality/Reliability/Service品质/可靠度服务M I L-S T DMilitary-Standard 军用标准S I-S IV Special I-SpecialI V特殊抽样水准等级P/N Part Number 料号L/N Lot Number 特采A O D A c c e p t O nD e v i a t i o n特采UAI Use As It 首件检查报告F P I R F i r s t P i e c e Inspection Report 百万分之一PPM Percent Per Million 批号制程统计品管专类SPC Statistical Process Control 统计制程管制SQC Statistical Quality Control 统计质量管理R R a n g e全距AR Averary Range 全距平均值UCL Upper Central Limit 管制上限LCL Lower Central Limit 管制下限MAX Maximum 最大值MIN Minimum 最小值G R R G a u g e Reproducibility&Repeata bility 量具之再制性及重测性判断量可靠与否DIM Dimension 尺寸D I A D i a m e t e r直径FREQ Frequency 频率N N u m b e r样品数其它品质术语类QCC Quality ControlC i r c l e品质圈Q I T Q u a l i t yImprovement Team 品质改善小组PDCA Plan Do CheckAction 计划执行检查总结ZD Zero Defect 零缺点QI Quality Improvement品质改善QP Quality Policy 目标方针T Q M To t a l Q u a l i t yManagement 全面品质管理MRB Material Reject Bill退货单LQL Limiting QualityL e v e l最低品质水准RMA Return MaterialA u d i t退料认可QAN Quality AmelionrateN o t i c e品质改善活动A D M A b s o l u t eDimension Measuremat全尺寸测量QT Quality Target 品质目标7Q CToo ls7Q u a li tyControll Tools 品管七大手法通用之件类E C N E n g i n e e r i n gChange Notes 工程变更通知(供货商)E C O E n g i n e e r i n gChange Order 工程改动要求(客户) PCN Process Change N o t i c e工序改动通知P M P P r o d u c t Management Plan 生产管制计划SIP Specif ication In Process 制程检验规格SOP Standard Operation Procedure 制造作业规范I S I n s p e c t i o n Specification 成品检验规范BOM Bill Of Material 物料清单PS Package Specification 包装规范SPEC Specification 规格D W G D r a w i n g图面系统文件类QC Quality System 品质系统E S E n g i n e e r i n gStandarization 工程标准CGOO China GeneralP C E龙华厂文件H Huston (美国)休斯敦C Compaq (美国)康伯公司C C h i n a中国大陆A Assembly 组装(厂)S Stamping 冲压(厂)P Pa i n t i n g烤漆(厂)I I n t e l英特尔公司T T A I W A N台湾I W S I n t e r n a t i o n a lWorkman Standard 工艺标准I S O I n t e r n a t i o n a lStandard Organization国际标准化组织GS General Specification一般规格C M C S C-C h i n aM-Manufact C-CompaqS-Stamping Compaq产品在龙华冲压厂制造作业规范C Q C A Q-Q u a l i t yA-Assembly Compaq产品在龙华组装厂品管作业规范C Q C P P-P a i n t i n gCompaq产品在龙华烤漆厂品管作业规范部类P M C P r o d u c t i o n&Material Control 生产和物料控制PPC Production PlanControl 生产计划控制MC Material Control 物料控制M E M a n a f a c t u r eEngineering 制造工程部PE Project Engineering 产品工程部A/C Accountant Dept 会计部P/A P e r s o n a l& Administration 人事行政部DC Document Center 资料中心QE Quality Engineering 品质工程(部) QA Quality Assurance 品质保证(处) QC Quality Control 质量管理(课) PD Product Department 生产部LAB Labratry 实验室IE Industrial Engineering 工业工程R&D Research & Design 设计开发部P Pa i n t i n g烤漆(厂)A Asssembly 组装(厂)S Stamping 冲压(厂)生产类PCS Pieces 个(根,块等)P R S P a i r s双(对等)C T N C a r t o n卡通箱PAL Pallet/skid 栈板PO Purchasing Order 采购订单MO Manufacture Order生产单D/C Date Code 生产日期码ID/C Identification Code(供货商)识别码S W R S p e c i a l Wo r kRequest 特殊工作需求L/N Lot Number 批号P/N Part Number 料号其它OEM Original EquipmentManufacture 原设备制造PCE Personal ComputerEnclosure 个人计算机外设PC Personal Computer个人计算机CPU Central ProcessingU n i t中央处理器S E CC S EC C`电解片SGCC SGCC 热浸镀锌材料NHK North of Hongkong中国大陆PRC People's Republic ofC h i n a中国大陆U.S.A the United Stateso f A m e r i c a美国A.S.A.P As Soon AsPo s s i b l e尽可能快的E-MAIL Electrical-Mail电子邮件N/A Not Applicable 不适用Q T Y Q u a n t i t y数量V S以及R E V R e v i s i o n版本JIT Just In Time 零库存I/O Input/Output 输入/输出O K O k好NG Not Good 不行,不合格C=0 Critical=0 极严重不允许E S D E l e c t r y-s t a t i c D i s c h a r g e静电排放5S 希腊语整理,整顿,清扫,清洁,教养ATIN Attention 知会CC Carbon Copy 副本复印相关人员APP Approve 核准,认可,承认C H K C h e c k确认AM Ante Meridian 上午PM Post Meridian 下午CD Compact Disk 光盘CD-ROM Compact DiskRead-Only Memory 只读光盘FDD Floppy Disk Drive软盘机HDD Hard Disk Drive 碟碟机REF Reference 仅供参考CONN Connector 连接器C A V C a v i t y模穴C AD C o m p u t e r A i dDesign 计算器辅助设计ASS'Y Assembly 装配,组装MAT'S Material 材料IC Integrated Circuit 集成电路T/P True Position 真位度T Y P T y p e类型WDR Weekly DeliveryRequitement 周出货需求C?T Cycle Time 制程周期L/T Lead Time 前置时间(生产前准备时间)S/T Standard Time 标准时间P/M Product Market 产品市场3 CComputer,Commumcation,Consumer electronic's消费性电子5W I HWhen,Where,Who,What,W h y,H o w t o 5M Man,Machine,Material,M e t h o d,Me a s u re m e n t 4M I H Man,Materia,Money,Met hod,Time 人力,物力,财务,技术,时间(资源) SQA Strategy Quality Assurance 策略品质保证DQA Desigh Quality Assurance 设计品质保证M Q A M a n u f a c t u r e Quality Assurance 制造品质保证SSQA Sales and service Quality Assurance 销售及服务品质保证LRR Lot Rejeet Rate 批退率BS Brain storming 脑力激荡E M I E l e c t r o n i cMagnetion Inspect 高磁测试F M I F r e q u e n c yModulatim Inspect 高频测试B/M Boar/Molding(flatc a b l e)C/P Connector of PCA/P A s s e m b l ySPS Switching powers u p p l y电源箱DT Desk Top 卧式(机箱)MT Mini-Tower 立式(机箱)DVD Digital Vedio DiskVCD Vdeio Compact DiskL C D L i q u i d C r y s t a lD i s p l a yC AD C o m p u t e r A I DD e s i g nC A M C om pu te r A IDM a n u f a c t u r i n gC A E C o m p u t e r A I DE n g i n e e r i n gABIOS Achanced Basicin put/output system 先进的基本输入/输出系统CMOS ComplemeruaryM e t o l l O x i d eSemiconductor 互补金属氧化物半导体PDA Personal DigitalAssistant 个人数字助理IC Integrated Circuit 集成电路ISA Industry StandardArchitecture 工业标准体制结构MCA Micro Ch an n e lArchitecture 微信道结构EISA Extended IndustryStandard Architecture扩充的工业标准结构SIMM Single in-li ne memory module 单项导通汇流组件D I M M D u a l i n-l i n e Memory Module 双项导通汇流组件L E D L i g h t-E m i t t i n g D i o d e发光二级管F M E A Fa i l u re M o d e Effectivenes 失效模式分析W/H Wire Harness 金属线绪束集组件F/C F l a t C a l l e排线PCB P rin te d Circu it B o a r d印刷电路板CAR Correction Action R e p o r t改善报告N G N o t G o o d不良WPR Weekly Delivery Requirement 周出货要求PPM Parts Per Million 百万分之一TPM Total ProductionMaintenance 全面生产保养M R P M a t e r i a lRequiremcnt Planning物料需计划OC Operation System 操作系统TBA To Be Design 待定,定缺D/C Drawing ChangeP/P Plans & ProceduneEMI Electrical-MusicIndustry 电子音乐工业RFI Read FrequencyI n p u t读频输入MMC Maximum MaterialC o n d i t i o nMMS Maximum MaterialS i z eL MC L e as t M a te ri alC o n d i t i o nLMS Least Material Size------------------------------------------------------------------------------------------模具技术用语各种模具常用成形方式accurate die casting 精密压铸powder forming粉末成形calendaring molding 压延成形powder metalf o rg i n g粉末锻造cold chamber die casting冷式压铸p r e c i s i o nf o rg i n g精密锻造cold forging 冷锻pressf o rg i n g冲锻compacting molding 粉末压出成形rocking dief o rg i n g摇动锻造。
冲压模具专业词汇中英文翻译
冲压模具词汇Counter bored hole 沉孔Chamfer 倒斜角Fillet 倒圆角padding block垫块stepping bar垫条upper die base上模座lower die base下模座upper supporting blank上承板upper padding plate blank上垫板spare dies模具备品spring 弹簧bolt螺栓document folder活页夹file folder资料夹to put file in order整理资料spare tools location手工备品仓first count初盘人first check初盘复棹人second count 复盘人second check复盘复核人equipment设备waste materials废料work in progress product在制品casing = containerization装箱quantity of physical inventory second count 复盘点数量Quantity of customs count 会计师盘,点数量the first page第一联filed by accounting department for reference会计部存查end-user/using unit(department)使用单位Summary of year-end physical inventory bills 年终盘点截止单据汇总表bill name单据名称This sheet and physical inventory list will be sent to accounting department together (Those of NHK will be sent to financial department)本表请与盘点清册一起送会计部－(NHK厂区送财会部)Application status records of year-end physical inventory List and physical inventory card 年终盘点卡与清册使用－状况明细表blank and waste sheet NO. 空白与作废单号plate电镀mold成型material for engineering mold testing工程试模材料not included in physical inventory不列入盘点sample样品incoming material to be inspected进货待验description品名steel/rolled steel钢材material statistics sheet 物料统计明细表meeting minutes会议记录meeting type 会别distribution department分发单位location地点chairman主席present members出席人员subject主题conclusion结论decision items决议事项responsible department负责单位pre-fixed finishing date预定完成日approved by / checked by / prepared by核准/审核/承办PCE assembly production schedule sheetPCE组装厂生产排配表model机钟work order工令revision版次remark备注production control confirmation生产确认checked by初审approved by核准department部门Stock age analysis sheet 库存货龄分析表on-hand inventory现有库存available material良品可使用obsolete material良品已呆滞to be inspected or reworked 待验或重工total合计cause description原因说明part number/ P/N 料号type形态item/group/class类别quality品质prepared by制表notes说明year-end physical inventory difference analysis sheet 年终盘点差异分析表physical inventory盘点数量physical count quantity帐面数量difference quantity差异量cause analysis原因分析raw materials原料materials物料finished product成品semi-finished product半成品packing materials包材good product/accepted goods/ accepted parts/good parts良品defective product/non-good parts不良品disposed goods处理品warehouse/hub仓库on way location在途仓oversea location海外仓spare parts physical inventory list备品盘点清单spare molds location模具备品仓skid/pallet栈板tox machine自铆机wire EDM线割EDM放电机coil stock卷料sheet stock片料tolerance工差score=groove压线cam block滑块pilot导正筒trim剪外边pierce剪内边drag form压锻差pocket for the punch head挂钩槽slug hole废料孔feature die公母模expansion dwg展开图radius半径shim(wedge)楔子torch-flame cut火焰切割set screw止付螺丝form block折刀stop pin定位销round pierce punch=die button圆冲子shape punch=die insert异形子stock locater block定位块under cut=scrap chopper清角active plate活动板baffle plate挡块cover plate盖板male die公模female die母模groove punch压线冲子air-cushion eject-rod气垫顶杆spring-box eject-plate弹簧箱顶板bushing block衬套insert 入块club car高尔夫球车capability能力parameter参数factor系数phosphate皮膜化成viscosity涂料粘度alkalidipping脱脂（degrease）main manifold主集流脉bezel斜视规blanking穿落模dejecting顶固模demagnetization去磁;消磁high-speed transmission高速传递heat dissipation热传rack上料degrease脱脂rinse水洗alkaline etch龄咬desmut剥黑膜D.I. rinse纯水次Chromate铬酸处理Anodize阳性处理seal封孔revision版次part number/P/N料号good products良品scraped products报放心品defective products不良品finished products成品disposed products处理品barcode条形码flow chart流程窗体assembly组装stamping冲压molding成型 spare parts=buffer备品coordinate坐标dismantle the die折模auxiliary function辅助功能poly-line多义线heater band 加热片thermocouple热电偶sand blasting喷沙grit 砂砾deducting machine除锈机degate打浇口dryer烘干机induction感应induction light感应光response=reaction=interaction感应ram连杆edge finder巡边器concave 凹convex凸short射料不足nick缺口speck瑕疪shine亮班splay 银纹gas mark焦痕delamination起鳞cold slug冷块blush 导色gouge沟槽;凿槽satin texture段面咬花witness line证示线patent专利grit沙砾granule=peuet=grain细粒grit maker抽粒机cushion缓冲magnalium镁铝合金magnesium镁金metal plate钣金lathe车mill锉plane刨grind磨drill钻boring镗blinster气泡fillet镶;嵌边through-hole form通孔形式voller pin formality滚针形式cam driver铡楔shank摸柄crank shaft曲柄轴angle offset角度偏差velocity速度production tempo生产进度现状torque扭矩spline=the multiple keys花键quenching淬火tempering回火annealing退火carbonization碳化alloy合金tungsten high speed steel钨高速的moly high speed steel钼高速的organic solvent有机溶剂bracket小磁导liaison联络单volatile挥发性resistance电阻ion离子titrator滴定仪beacon警示灯coolant冷却液crusher破碎机plain die简易模pierce die冲孔模forming die成型模progressive die连续模gang dies复合模shearing die剪边模riveting die铆合模pierce冲孔forming成型(抽凸,冲凸) draw hole抽孔bending折弯trim切边emboss凸点dome凸圆semi-shearing半剪stamp mark冲记号deburr or coin压毛边punch riveting冲压铆合side stretch侧冲压平reel stretch卷圆压平groove压线blanking下料stamp letter冲字(料号) shearing剪断tick-mark nearside正面压印tick-mark farside反面压印extension dwg展开图procedure dwg工程图die structure dwg模具结构图material材质material thickness料片厚度factor系数upward向上downward向下press specification冲床规格die height range适用模高die height闭模高度burr毛边gap间隙weight重量total wt.总重量punch wt.上模重量inner guiding post内导柱inner hexagon screw内六角螺钉dowel pin固定销coil spring弹簧lifter pin顶料销eq-height sleeves=spool等高套筒pin销lifter guide pin浮升导料销guide pin导正销wire spring圆线弹簧outer guiding post外导柱stop screw止付螺丝located pin定位销outer bush外导套top plate上托板（顶板）top block上垫脚punch set上模座punch pad上垫板punch holder上夹板stripper pad脱料背板up stripper上脱料板male die公模(凸模)feature die公母模female die母模(凹模)upper plate上模板lower plate下模板die pad下垫板die holder下夹板die set下模座bottom block下垫脚bottom plate下托板(底板) stripping plate内外打(脱料板) outer stripper外脱料板inner stripper内脱料板lower stripper下脱料板punch冲头insert入块(嵌入件)deburring punch压毛边冲子groove punch压线冲子stamped punch字模冲子round punch圆冲子special shape punch异形冲子bending block折刀roller滚轴baffle plate挡块located block定位块supporting block for location 定位支承块air cushion plate气垫板air-cushion eject-rod气垫顶杆trimming punch切边冲子stiffening rib punch = stinger 加强筋冲子ribbon punch压筋冲子reel-stretch punch卷圆压平冲子guide plate定位板plain die简易模pierce die冲孔模forming die成型模progressive die连续模gang dies复合模shearing die剪边模riveting die铆合模pierce冲孔forming成型(抽凸,冲凸)draw hole抽孔bending折弯trim切边emboss凸点dome凸圆semi-shearing半剪stamp mark冲记号deburr or coin压毛边punch riveting冲压铆合side stretch侧冲压平reel stretch卷圆压平groove压线blanking下料stamp letter冲字(料号) shearing剪断tick-mark nearside正面压印tick-mark farside反面压印extension dwg展开图procedure dwg工程图die structure dwg模具结构图material材质material thickness料片厚度factor系数upward向上downward向下press specification冲床规格die height range适用模高die height闭模高度burr毛边gap间隙weight重量total wt.总重量punch wt.上模重量air vent vale 通气阀anchor pin 锚梢angular pin 角梢baffle 调节阻板angular pin 倾斜梢baffle plate 折流档板ball button 球塞套ball plunger 定位球塞ball slider 球塞滑块binder plate 压板blank holder 防皱压板blanking die 落料冲头bolster 上下模板bottom board 浇注底板bolster 垫板bottom plate 下固定板bracket 托架bumper block 缓冲块buster 堵口casting ladle 浇注包casting lug 铸耳cavity 模穴(模仁)cavity retainer plate 模穴托板center pin 中心梢clamping block 锁定块coil spring 螺旋弹cold punched nut 冷冲螺母cooling spiral 螺旋冷却栓core 心型core pin 心型梢cotter 开口梢cross 十字接头cushion pin 缓冲梢diaphragm gate 盘形浇口die approach 模头料道die bed 型底die block 块形模体die body 铸模座die bush 合模衬套die button 冲模母模全球模具网die clamper 夹模器die fastener 模具固定用零件die holder 母模固定板die lip 模唇die plate 冲模板die set 冲压模座direct gate 直接浇口dog chuck 爪牙夹头dowel 定位梢dowel hole 导套孔dowel pin 合模梢dozzle 辅助浇口dowel pin 定位梢draft 拔模锥度draw bead 张力调整杆drive bearing 传动轴承ejection pad 顶出衬垫ejector 脱模器ejector guide pin 顶出导梢ejector leader busher 顶出导梢衬套ejector pad 顶出垫ejector pin 顶出梢ejector plate 顶出板ejector rod 顶出杆ejector sleeve 顶出衬套ejector valve 顶出阀eye bolt 环首螺栓filling core 椿入蕊film gate 薄膜形浇口finger pin 指形梢finish machined plate 角形模板finish machined round plate 圆形模板fixed bolster plate 固定侧模板flanged pin 带凸缘?flash gate 毛边形浇口flask 上箱floating punch 浮动冲头gate 浇口gate land 浇口面gib 凹形拉紧goose neck 鹅颈管guide bushing 引导衬套guide pin 导梢guide post 引导柱guide plate 导板guide rail 导轨head punch 顶冲头headless punch 直柄冲头heavily tapered solid 整体模蕊盒hose nippler 管接头impact damper 缓冲器injection ram 压射柱塞inlay busher 嵌入衬套inner plunger 内柱塞inner punch 内冲头insert 嵌件insert pin 嵌件梢king pin 转向梢king pin bush 主梢衬套knockout bar 脱模杵land 合模平坦面land area 合模面leader busher 导梢衬套lifting pin 起模顶?lining 内衬locating center punch 定位中心冲头locating pilot pin 定位导梢locating ring 定位环lock block 压块locking block 定位块locking plate 定位板loose bush 活动衬套making die 打印冲子manifold block 歧管档块汽车英语first gear 一档second gear 二档reverse 倒车档two-stroke engine 二冲程发动机diesel 柴油机limousine 豪华轿车drophead 活动车篷汽车 (美作:convertible) racing car 赛车saloon 轿车 (美作:sedan)wecker, beat-up car, jalopy 老爷车notchback 客货两用车four-wheel drive 四轮驱动front-wheel drive 前轮驱动trailer 拖车truck 卡车compact car 小型汽车light-van 小型货车front wheel 前轮rear wheel 后轮tread 轮距chassis 底盘bodywork, body 车身rear window 后窗玻璃windscreen 挡风玻璃 (美作:windshield)windscreen wiper 风档刮水器,风档雨雪刷 (美作:windshield wiper) fender, wing, mudguard 挡泥板radiator grille 水箱wing mirror 后视镜bonnet 发动机盖 (美作:hood)boot 行李箱 (美作:trunk)roof rack, luggage rack 行李架license plate, number plate 车号牌wing 前翼子板hubcap 轮毂罩bumper 保险杠front blinker 前信号灯taillight, tail lamp 尾灯backup light, reversing light 倒车灯stoplight, stop lamp 刹车灯rear blinker 转弯指示灯trunk, boot 行李箱bumper 保险杠tailpipe 排气管back seat, rear seat 后座driver's seat, driving seat 驾驶席passenger seat 旅客席steering wheel, wheel 方向盘rear-view mirror, driving mirror 后视镜horn, hooter 喇叭choke 熄火装置gear stick, gear change 变速杆 (美作:gearshift) gearbox 变速箱starter, self-starter 起动器,起动钮brake pedal 刹车踏板clutch pedal 离合器踏板hand brake 手制动器foot brake 脚制动器dashboard 仪表板milometer 里程表speedometer, clock 速度表transmission 传动piston 活塞radiator 散热器fan belt 风扇皮带shaft 传动轴inner tube 内胎drain tap 排气阀门silencer 消音器 (美作:muffler)tank 油箱overflow 溢流孔valve 阀门exhaust pipe 排气管spare wheel 备胎,备用轮胎carburettor 汽化器 (美化:carburetor) electrical system, wiring 电气系统lights 灯光headlight 大灯,头灯dipped headlight 近光灯rear lights 尾灯sidelights, parking lights 位置灯,边灯direction indicator 方向标,转向标indicator, blinker 方向指示灯sparking plug 火花塞 (美作:spark plug) (spare) battery (备用)蓄电池to accelerate 加速to brake 制动,刹车to engage the clutch 接上离合器to declutch 分开离合器to stall 发动机停转to change gear 变速to decelerate 减速top speed 最高速度speed limit 速度限制to park 停车to switch off the motor 熄火模具工程常用词汇模具钢材alloy tool steel 合金工具钢 aluminium alloy 铝合金钢 bearing alloy 轴承合金 blister steel 浸碳钢 bonderized steel sheet 邦德防蚀钢板carbon tool steel 碳素工具钢clad sheet 被覆板clod work die steel 冷锻模用钢emery 金钢砂 ferrostatic pressure 钢铁水静压力forging die steel 锻造模用钢galvanized steel sheet 镀锌铁板hard alloy steel 超硬合金钢high speed tool steel 高速度工具钢hot work die steel 热锻模用钢low alloy tool steel 特殊工具钢low manganese casting steel 低锰铸钢marging steel 马式体高强度热处理钢martrix alloy 马特里斯合金meehanite cast iron 米汉纳铸钢meehanite metal 米汉纳铁merchant iron 市售钢材molybdenum high speed steel钼系高速钢 molybdenum steel钼钢 nickel chromium steel 镍铬钢prehardened steel 顶硬钢silicon steel sheet 硅钢板stainless steel 不锈钢tin plated steel sheet 镀锡铁板tough pitch copper 韧铜troostite 吐粒散铁tungsten steel 钨钢vinyl tapped steel sheet 塑料覆面钢板四、模具零件：mold components三板模：3-plate mold二板模：2-plate mold边钉/导边：leader pin/guide pin边司/导套：bushing/guide bushing中托司：shoulder guide bushing中托边L：guide pin顶针板：ejector retainner plate托板：support plate螺丝： screw管钉：dowel pin开模槽：ply bar scot内模管位：core/cavity inter-lock顶针：ejector pin司筒：ejector sleeve司筒针：ejector pin推板：stripper plate缩呵：movable core,return core core puller 扣机（尼龙拉勾）：nylon latch lock斜顶：lifter模胚（架）： mold base上内模：cavity insert下内模：core insert行位（滑块）： slide镶件：insert压座/斜鸡：wedge耐磨板/油板：wedge wear plate压条：plate撑头: support pillar唧嘴： sprue bushing挡板：stop plate定位圈：locating ring锁扣：latch扣鸡：parting lock set推杆：push bar栓打螺丝：S.H.S.B顶板：eracuretun活动臂：lever arm分流锥：spure sperader水口司:bush垃圾钉：stop pin隔片：buffle弹弓柱：spring rod弹弓:die spring中托司：ejector guide bush中托边：ejector guide pin镶针：pin销子：dowel pin波子弹弓：ball catch喉塞: pipe plug锁模块：lock plate斜顶：angle from pin斜顶杆：angle ejector rod尼龙拉勾：parting locks活动臂：lever arm复位键、提前回杆：early return bar气阀：valves斜导边：angle pin术语：terms承压平面平衡：parting surface support balance模排气：parting line venting回针碰料位：return pin and cavity interference模总高超出啤机规格：mold base shut hight顶针碰运水：water line interferes withejector pin料位出上/下模：part from cavith (core) side模胚原身出料位：cavity direct cut on A-plate,core direct cut on B-plate. 不准用镶件： Do not use (core/cavity) insert用铍铜做镶件： use beryllium copper insert初步（正式）模图设计：preliinary (final) mold design反呵：reverse core弹弓压缩量：spring compressed length稳定性好：good stability,stable强度不够：insufficient rigidity均匀冷却：even cooling扣模：sticking热膨胀：thero expansion公差：tolorance铜公(电极）：copper electrode模具工程常用词汇die 模具 die shoe 模瓦figure file, chart file图档cutting die, blanking die冲模progressive die, follow (-on)die 连续模compound die复合模punched hole冲孔 panel board镶块to cutedges=side cut=side scrap切边to bending折弯to pull, to stretch拉伸Line streching, line pulling线拉伸engraving, to engrave刻印upsiding down edges翻边to stake铆合design modification设计变化 die block模块folded block折弯块sliding block滑块location pin定位销lifting pin顶料销die plate, front board模板padding block垫块stepping bar垫条upper die base上模lower die base下模座upper supporting blank上承板upper padding plate blank上垫板spare dies模具备品spring 弹簧 bolt螺栓plate电镀mold成型material for engineering mold testing工程试模材料not included in physical inventory不列入盘点incoming material to be inspected进货待验PCE assembly production schedule sheet PCE组装厂生产排配表model机锺work order工令revision版次production control confirmation生产确认checked by初审approved by核准stock age analysis sheet 库存货龄分析表on-hand inventory现有库存available material良品可使用obsolete material良品已呆滞to be inspected or reworked 待验或重工cause description原因说明part number/ P/N 料号item/group/class类别prepared by制year-end physical inventory difference analysis sheet 年终盘点差异分析表physical inventory盘点数量physical count quantity帐面数量difference quantity差异good product/accepted goods/ accepted parts/good parts良品defective product/non-good parts不良品disposed goods处理品on way location在途仓oversea location海外仓spare parts physical inventory list备品盘点清单spare molds location模具备品仓skid/pallet栈板tox machine自铆机wire EDM线割 EDM放电机coil stock卷料sheet stock片料tolerance工差score=groove压线cam block滑块pilot导正筒trim剪外边pierce剪内边drag form压锻差pocket for the punch head挂钩槽slug hole废料孔feature die公母模expansion dwg展开图radius半径shim(wedge)楔子torch-flame cut火焰切割set screw止付螺丝form block折刀stop pin定位销round pierce punch=die button圆冲子shape punch=die insert异形子stock locater block定位块under cut=scrap chopper清角active plate活动板baffle plate挡块cover plate盖板male die公模female die母模groove punch压线冲子air-cushion eject-rod气垫顶杆spring-box eject-plate弹簧箱顶板bushing block衬套insert 入块capability能力parameter参数 factor系数phosphate皮膜化成viscosity涂料粘度alkalidipping脱脂main manifold主集流脉bezel斜视规blanking穿落模dejecting顶固模demagnetization去磁;消磁high-speed transmission高速传递heat dissipation热传rack上料degrease脱脂rinse水洗alkaline etch龄咬 desmut剥黑膜 D.I. rinse纯水次 Chromate铬酸处理 Anodize阳性处理 seal封孔revision版次 part number/P/N料号 good products良品 scraped products报放心品 defective products不良品finished products成品 disposed products处理品 barcode条码 flow chart流程表单 assembly组装 stamping冲压molding成型 spare parts=buffer备品 coordinate座标 dismantle the die折模 auxiliary fuction辅助功能 poly-line 多义线 heater band 加热片 thermocouple热电偶 sand blasting喷沙 grit 砂砾 derusting machine除锈机 degate打浇口 dryer烘干机 induction感应 induction light感应光 response=reaction=interaction感应 ram连杆 edge finder 巡边器 concave凸 convex凹 short射料不足 nick缺口 speck瑕疵 shine亮班 splay 银纹 gas mark焦痕 delamination 起鳞 cold slug冷块 blush 导色 gouge沟槽;凿槽 satin texture段面咬花 witness line证示线 patent专利 grit沙砾 granule=peuet=grain细粒 grit maker抽粒机cushion缓冲 magnalium镁铝合金 magnesium镁金 metal plate钣金 lathe车 mill锉 plane刨 grind磨drill铝 boring镗 blinster气泡 fillet镶;嵌边 through-hole form通孔形式 voller pin formality滚针形式 cam driver铡楔 shank摸柄 crank shaft曲柄 augular offset角度偏差 velocity速度 production tempo生产进度现状torque扭矩 spline=the multiple keys花键quenching淬火 tempering回火annealing退火 carbonization碳化 alloy合金 tungsten high speed steel钨高速的 moly high speed steel钼高速的 organic solvent有机溶剂 bracket小磁导 liaison联络单 volatile挥发性resistance电阻 ion离子titrator滴定仪 beacon警示灯 coolant冷却液 crusher破碎机模具工程类 plain die简易模 pierce die冲孔模forming die成型模 progressive die连续模 gang dies复合模 shearing die剪边模 riveting die铆合模 pierce冲孔forming成型(抽凸,冲凸) draw hole抽孔 bending折弯 trim切边 emboss凸点dome凸圆 semi-shearing半剪 stamp mark冲记号 deburr or coin压毛边 punch riveting冲压铆合 side stretch侧冲压平 reel stretch卷圆压平 groove压线 blanking下料 stamp letter冲字(料号) shearing剪断 tick-mark nearside正面压印 tick-mark farside反面压印冲压名称类 extension dwg展开图 procedure dwg工程图 die structure dwg模具结构图 material材质material thickness料片厚度press specification冲床规格 die height range适用模高 die height闭模高度 burr毛边 gap间隙 punch wt.上模重量。
汽车冲压部件中英对照表
英文名称 INSTALL ASSY PANEL PILLAR DOOR HOOD stringer mennber Cross mennber BRACE BRACKET HINGE BULKHEAD REINF FLOOR lower LH RH Front Rear inner FR DR RR DR F/FLR R/FLR BAR S-IMPACT RR DR BAR FR END UPR BEAM RR BPR INR BEAM RR BPR OTR BRACE RR SHELF LH BRACE RR SHELF RH BRACE RR. FLOOR SIDE LH BRACE RR. FLOOR SIDE RH BRACE S/MBR TO FRT FLOOR LH BRACKET HOOD RELEASE (LHD) BRACKET RR FLOOR SEAT MTG LH BRACKET RR FLOOR SEAT MTG RH BRK S-IMPACT RR FR DR LH BRKT ANTI ZIPPER LH BRKT BUMPER BRKT CTR BPR MTG BRKT FASCIA MTG BRKT FENDER LWR LH 缩写 中文名称 安装 总成 板 柱 门 盖 纵梁 横梁 支柱 支架 铰链 隔板 加强板 地板 上部 下部 左侧 右侧 前侧 后侧 外侧 内侧 前门 后门 前地板 后地板 后门侧防撞杆 散热器上横梁 后保防撞梁内板 后保防撞梁外板 后行李箱隔板左侧支柱 后行李箱隔板右侧支柱 后地板左边支柱 后地板右边支柱 前纵梁与前地板左连接板 发罩拉索支架 左后座椅安装支架 右后座椅安装支架 前门防撞杆后支架 前地板与门槛内板左连接板 前保险杠支架 后保险杠中部支架 保险杠安装支架 左侧前轮挡泥板下部支架
汽车零部件生产术语
汽车零部件生产术语
1. 冲压成形(Stamping)
这是一种通过将金属板材置于模具中,施加巨大压力将其塑形成所需零件的制造工艺。
常见的冲压件包括车身面板、底盘部件等。
2. 铸造(Casting)
通过将熔融金属或合金浇注到模具腔内,冷却凝固成型的制造过程。
常见的铸造件包括发动机缸体、变速箱壳体等。
3. 锻造(Forging)
在加热状态下,将金属坯料置于模具中经受重击或挤压力而成形的工艺。
常见的锻件包括曲轴、连杆等。
4. 机加工(Machining)
利用切削加工设备如车床、铣床等,将金属坯料切削成所需形状和尺寸的制造方式。
常用于加工发动机零件、变速箱零件等。
5. 焊接(Welding)
利用热或压力将两个或多个金属零件连接在一起的过程。
焊接方式包括电弧焊、点焊、激光焊等,广泛应用于车身结构、排气系统等。
6. 热处理(Heat Treatment)
通过对金属零件进行加热、保温和冷却等热处理,以改善其机械性能的工艺过程。
如调质热处理可提高强度和硬度。
7. 表面处理(Surface Treatment)
对金属零件表面进行电镀、喷涂、氧化等处理,以提高耐腐蚀性、装饰性等特性的工艺过程。
如电镀铬、阳极氧化等。
以上是汽车零部件生产中常见的一些术语和概念,掌握这些可以更好地理解汽车制造过程。
冲压件专业英语术语
emboss凸点、凸包dome凸圆semi-shearing半剪stamp mark冲记号deburr or coin压毛边punch riveting冲压铆合side stretch侧冲压平reel stretch卷圆压平groove压线blanking下料stamp letter冲字(料号)shearing剪断tick-mark nearside正面压印tick-mark farside反面压印冲压名称类extension dwg展开图procedure dwg工程图die structure dwg模具结构图material材质material thickness料片厚度factor系数upward向上downward向下press specification冲床规格die height range适用模高die height闭模高度burr毛边gap间隙weight重量total wt.总重量punch wt.上模重量五金零件类inner guiding post内导柱inner hexagon screw内六角螺钉dowel pin固定销coil spring弹簧lifter pin顶料销eq-height sleeves=spool等高套筒pin销lifter guide pin浮升导料销guide pin导正销wire spring圆线弹簧outer guiding post外导柱stop screw止付螺丝located pin定位销outer bush外导套模板类top plate上托板（顶板）top block上垫脚punch set上模座punch pad上垫板punch holder上夹板stripper pad脱料背板up stripper上脱料板male die公模(凸模)feature die公母模female die母模(凹模)upper plate上模板lower plate下模板die pad下垫板die holder下夹板die set下模座bottom block下垫脚bottom plate下托板(底板)stripping plate内外打(脱料板)outer stripper外脱料板inner stripper内脱料板lower stripper下脱料板零件类punch冲头insert入块(嵌入件)deburring punch压毛边冲子groove punch压线冲子stamped punch字模冲子round punch圆冲子special shape punch异形冲子bending block折刀roller滚轴baffle plate挡块located block定位块supporting block for location定位支承块air cushion plate气垫板air-cushion eject-rod气垫顶杆trimming punch切边冲子stiffening rib punch = stinger 加强筋冲子ribbon punch压筋冲子reel-stretch punch卷圆压平冲子guide plate定位板sliding block滑块冲压模具-冲压名称类英汉对照plain die简易模pierce die冲孔模forming die成型模progressive die连续模gang dies复合模shearing die剪边模riveting die铆合模pierce冲孔forming成型(抽凸,冲凸)draw hole抽孔bending折弯trim切边emboss凸点dome凸圆semi-shearing半剪stamp mark冲记号deburr or coin压毛边punch riveting冲压铆合side stretch侧冲压平reel stretch卷圆压平groove压线blanking下料stamp letter冲字(料号)shearing剪断tick-mark nearside正面压印tick-mark farside反面压印extension dwg展开图procedure dwg工程图die structure dwg模具结构图material材质material thickness料片厚度factor系数upward向上downward向下press specification冲床规格die height range适用模高die height闭模高度burr毛边gap间隙。
冲压件中英文对照
地板通道前上加强板 REINF - TUNNEL UPR FRONT 转向管柱上支架 BRKT - UPR STRG COLUMN 转向管柱下支架 BRKT - LWR STEERING COLUMN 前地板 PANEL - FRONT FLOOR 地板右侧纵梁 LONGITUDINAL - FLOOR CENTER RH SIDE 地板左侧纵梁 LONGITUDINAL - FLOOR CENTER LH SIDE 地板右侧围板 PANEL - FLOOR SIDE RH 地板左侧围板 PANEL - FLOOR SIDE LH 地板通道上加强件 REINF - TUNNEL UPR REAR 前座椅前横梁 C/MBR - FRONT SEAT FRONT 右前座椅后横梁 C/MBR - FRONT SEAT REAR RH 左前座椅后横梁 C/MBR - FRONT SEAT REAR LH 前座椅后安装点内加强板 REINF - INR. RR C/MBR FR SEAT SUPPORT 右前座椅后横梁外加强板 REINF - OTR. RR C/MBR FR SEAT SUPPORT RH 左前座椅后横梁外加强板 REINF - OTR. RR C/MBR FR SEAT SUPPORT LH 座椅安全带固定支座加强板 REINF- SEAT BELT ANCHOR 中地板 PANEL - REAR FLOOR FRONT 后地板 PANEL - REAR FLOOR REAR 后地板前横梁 C/MBR - REAR FLOOR CENTER 中地板前横梁 C/MBR - REAR FLOOR FRONT
A 柱上加强板 REINF - FRONT PILLAR UPR RH A 柱上加强板 REINF - FRONT PILLAR UPR LH 右前门上铰链加强板 REINF - FRT DOOR HINGE UPPER RH 左前门上铰链加强板 REINF - FRT DOOR HINGE UPPER LH 右前门下铰链加强板 REINF - FR DOOR HINGE LOWER RH 左前门下铰链加强板 REINF - FR DOOR HINGE LOWER LH 顶盖右侧纵梁 RAIL - ROOF SIDE RH 顶盖左侧纵梁 RAIL - ROOF SIDE LH 右B 柱内板 PANEL - "B" PILLAR INNER RH 左B 柱内板 PANEL - "B" PILLAR INNER LH 右侧门铰链和座椅安全带加强板 REINF - SEAT BELT AND DR HINGE RH 左侧门铰链和座椅安全带加强板 REINF - SEAT BELT AND DR HINGE LH 右侧门槛加强板 REINF - ROCKER RH 左侧门槛加强板 REINF - ROCKER LH
汽车冲压件---英文名称
19
后地板前部本体
REAR-FRONT-FLOOR
20
左前纵梁外板
FRONT-OUTER-RAIL-LH
21
右前纵梁外板
FRONT-OUTER-RAIL-RH
22
左前纵梁后部内连接板
FRONT-RAIL-EXTENSION-INNER-BRKT-LH
23
右前纵梁后部内连接板
FRONT-RAIL-EXTENSION-INNER-BRKT-RH
116
雨刮安装支架
WIPER-SUPPORT-BRACKET
117
前挡板下加强梁
FRONT-LOWER-CROSSMEMBER
118
前风挡下横梁
COWL-BAR-PANEL
119
空气室加强板
COWL-BAR-EXTENSION
120
排水槽本体
UPPER-DASH-PANEL
121
空调安装支架
DASH-PANEL-UP-HVAC-BRACKET
65
前保右安装盒上板
66
前保左安装下板
67
前保右安装盒下板
68
后保防撞横梁固定板
69
前拖车钩支架
70
后保左安装盒上板
71
后保右安装盒上板
72
后保左安装盒下板
73
后保右安装盒下板
74
换档手柄安装支架
75
手制动前安装支架
76
然油箱中加强板
77
后部横梁
78 左前纵梁后部外连接板下板
79 右前纵梁后部外连接板下板
99
行李箱缓冲块支架
DECKLID-STOP-BRACKET-POSITIONED
冲压模具-冲压名称类英汉对照
冲压模具-冲压名称类英汉对照plain die 简易模pierce die 冲孔模forming die 成型模progressive die 连续模gang dies 复合模shearing die 剪边模riveting die 铆合模pierce 冲孔forming 成型（抽凸,冲凸） draw hole 抽孔bending 折弯trim 切边emboss 凸点dome 凸圆semi-shearing 半剪stamp mark 冲记号deburr or coin 压毛边punch riveting 冲压铆合side stretch 侧冲压平reel stretch 卷圆压平groove 压线blanking 下料stamp letter 冲字（料号） shearing 剪断tick-mark nearside 正面压印tick-mark farside 反面压印extension dwg 展开图procedure dwg 工程图die structure dwg 模具结构图material 材质material thickness 料片厚度factor 系数upward 向上downward 向下press specification 冲床规格die height range 适用模高die height 闭模高度burr 毛边gap 间隙weight 重量total wt. 总重量punch wt. 上模重量各式模具分类用语英汉对照landed plunger mold 有肩柱塞式模具burnishing die 挤光模landed positive mold 有肩全压式模具button die 镶入式圆形凹模loading shoe mold 料套式模具center-gated mold 中心浇口式模具loose detail mold 活零件模具chill mold 冷硬用铸模loose mold 活动式模具clod hobbing 冷挤压制模louvering die 百叶窗冲切模composite dies 复合模具manifold die 分歧管模具counter punch 反凸模modular mold 组合式模具double stack mold 双层模具multi-cavity mold 多模穴模具electroformed mold 电铸成形模multi-gate mold 复式浇口模具expander die 扩径模offswt bending die 双折冷弯模具extrusion die 挤出模palletizing die 叠层模family mold 反套制品模具plaster mold 石膏模blank through dies 漏件式落料模porous mold 通气性模具duplicated cavity plate 复板模positive mold 全压式模具fantail die 扇尾形模具pressure die 压紧模fishtail die 鱼尾形模具profile die 轮廓模flash mold 溢料式模具progressive die 顺序模gypsum mold 石膏铸模protable mold 手提式模具hot-runner mold 热流道模具prototype mold 雏形试验模具ingot mold 钢锭模punching die 落料模lancing die 切口模raising(embossing) 压花起伏成形re-entrant mold 倒角式模具sectional die 拼合模runless injection mold 无流道冷料模具sectional die 对合模具segment mold 组合模semi-positive mold 半全压式模具shaper 定型模套single cavity mold 单腔模具solid forging die 整体锻模split forging die 拼合锻模split mold 双并式模具sprueless mold 无注道残料模具squeezing die 挤压模stretch form die 拉伸成形模sweeping mold 平刮铸模swing die 振动模具three plates mold 三片式模具trimming die 切边模unit mold 单元式模具universal mold 通用模具unscrewing mold 退扣式模具yoke type die 轭型模模具英语解释进入位：水口形式：gate location gate type、入水：gate大水口：edge gate细水口：pin-point gate水口大小：gate size转水口：switching runner/gate唧嘴口径：sprue diameter二、流道: runner热流道：hot runner,hot manifold 热嘴冷流道: hot sprue/cold runner 唧嘴直流: direct sprue gate 圆形流道：round (full/half runner) 流道电脑分析：mold flow analysis 流道平衡:runner balance 热嘴：hot sprue 热流道板：hot manifold 发热管：cartridge heater 探针: thermocouples 插头：connector plug 插座：connector socket 密封/封料：seal 三、运水：water line 喉塞：line lpug 喉管：tube 塑胶管：plastic tube 快速接头：jiffy quick connectorplug/socker 四、模具零件：mold components三板模：3-plate mold 二板模：2-plate mold 边钉/ 导边：leader pin/guide pin 边司/ 导套：bushing/guide bushing 中托司：shoulder guide bushing 中托边L：guide pin 顶针板：ejector retainner plate 托板：support plate 螺丝：screw 管钉：dowel pin 开模槽：ply bar scot 内模管位：core/cavity inter-lock 顶针：ejector pin 司筒：ejector sleeve 司筒针：ejector pin 推板：stripper plate缩呵：movable core,return core core puller 扣机（尼龙拉勾）：nylon latch lock 斜顶：lifter 模胚（架）：mold base 上内模：cavity insert 下内模：core insert 行位（滑块）：slide 镶件：insert 压座/ 斜鸡：wedge 耐磨板/油板：wedge wear plate 压条：plate 撑头: support pillar 唧嘴：sprue bushing 挡板：stop plate 定位圈：locating ring 锁扣：latch 扣鸡：parting lock set 推杆：push bar 栓打螺丝：S.H.S.B 顶板：eracuretun 活动臂：lever arm 分流锥：spure sperader 水口司:bush 垃圾钉：stop pin 隔片：buffle 弹弓柱：spring rod 弹弓:die spring 中托司：ejector guide bush 中托边：ejector guide pin 镶针：pin 销子：dowel pin 波子弹弓：ball catch 喉塞: pipe plug 锁模块：lock plate 斜顶：angle from pin 斜顶杆：angle ejector rod 尼龙拉勾：parting locks 活动臂：lever arm 复位键、提前回杆：early return bar 气阀：valves 斜导边：angle pin 术语：terms 承压平面平衡：parting surface support balance 模排气：parting line venting回针碰料位：return pin and cavity interference 模总高超出啤机规格：mold base shut hight 顶针碰运水：water line interferes withejector pin 料位出上/下模：part from cavith (core) side 模胚原身出料位：cavity direct cut on A-plate,core direct cut on B-plate.不准用镶件：Do not use (core/cavity) insert 用铍铜做镶件：use beryllium copper insert 初步(正式)模图设计：preliinary (final) mold design 反呵：reverse core弹弓压缩量：spring compressed length 稳定性好：good stability,stable 强度不够：insufficient rigidity 均匀冷却：even cooling 扣模：sticking 热膨胀：thero expansion 公差：tolorance 铜公(电极)：copper electrode模具相关英语1padding block 垫块stepping bar 垫条upper die base 上模座lower die base 下模座upper supporting blank 上承板upper padding plate blank 上垫板spare dies 模具备品spring 弹簧bolt 螺栓document folder 活页夹file folder 资料夹to put file in order 整理资料spare tools location 手工备品仓first count 初盘人first check 初盘复棹人second count 复盘人second check 复盘复核人equipment 设备waste materials 废料work in progress product 在制品casing = containerazation 装箱quantity of physical invetory second count 复盘点数量quantity of customs count 会计师盘,点数量the first page 第一联filed by accounting department for reference 会计部存查end-user/using unit(department) 使用单位summary of year-end physical inventory bills 年终盘点截止单据汇总表bill name 单据名称This sheet and physical inventory list will be sent to accounting department together (Those of NHK will be sent to financial department) 本表请与盘点清册一起送会计部－(NHK 厂区送财会部) Application status records of year-end physical inventory List and physical inventory card 年终盘点卡与清册使用－状况明细表blank and waste sheet NO.空白与作废单号plate 电镀mold 成型material for engineering mold testing 工程试模材料not included in physical inventory 不列入盘点sample 样品incoming material to be inspected 进货待验description 品名steel/rolled steel 钢材material statistics sheet 物料统计明细表meeting minutes 会议记录meeting type 会别distribution department 分发单位location 地点chairman 主席present members 出席人员subject 主题conclusion 结论decision items 决议事项responsible department 负责单位pre-fixed finishing date 预定完成日approved by / checked by / prepared by 核准/审核/承办PCE assembly production schedule sheet PCE 组装厂生产排配表model 机钟work order 工令revision 版次remark 备注production control confirmation 生产确认checked by 初审approved by 核准department 部门stock age analysis sheet 库存货龄分析表on-hand inventory 现有库存available material 良品可使用obsolete material 良品已呆滞to be inspected or reworked 待验或重工total 合计cause description 原因说明part number/ P/N 料号type 形态item/group/class 类别quality 品质prepared by 制表notes 说明year-end physical inventory difference analysis sheet 年终盘点差异分析表physical inventory 盘点数量physical count quantity 帐面数量difference quantity 差异量cause analysis 原因分析raw materials 原料materials 物料finished product 成品semi-finished product 半成品packing materials 包材good product/accepted goods/ accepted parts/good parts 良品defective product/non-good parts 不良品disposed goods 处理品warehouse/hub 仓库on way location 在途仓oversealocation 海外仓spare parts physical inventory list 备品盘点清单spare molds location 模具备品仓skid/pallet 栈板tox machine 自铆机wire EDM 线割EDM 放电机coil stock 卷料sheet stock 片料tolerance 工差score=groove 压线cam block 滑块pilot 导正筒trim 剪外边pierce 剪内边drag form 压锻差pocket for the punch head 挂钩槽slug hole 废料孔feature die 公母模expansion dwg 展开图radius 半径shim(wedge) 楔子torch-flame cut 火焰切割set screw 止付螺丝form block 折刀stop pin 定位销round pierce punch=die button 圆冲子shape punch=die insert 异形子stock locater block 定位块under cut=scrap chopper 清角active plate 活动板模具相关英语2baffle plate 挡块cover plate 盖板male die 公模female die 母模groove punch 压线冲子air-cushion eject-rod 气垫顶杆spring-box eject-plate 弹簧箱顶板bushing block 衬套insert 入块club car 高尔夫球车capability 能力parameter 参数factor 系数phosphate皮膜化成viscosity 涂料粘度alkalidipping 脱脂main manifold 主集流脉bezel 斜视规blanking 穿落模dejecting 顶固模demagnetization 去磁; 消磁high-speed transmission 高速传递heat dissipation 热传rack 上料degrease 脱脂rinse 水洗alkaline etch 龄咬desmut 剥黑膜D.I. rinse 纯水次Chromate 铬酸处理Anodize 阳性处理seal 封孔revision 版次part number/P/N 料号good products 良品scraped products 报放心品defective products 不良品finished products 成品disposed products 处理品barcode 条形码flow chart 流程窗体assembly 组装stamping 冲压molding 成型spare parts=buffer 备品coordinate 坐标dismantle the die 折模auxiliary fuction 辅助功能poly-line 多义线heater band 加热片thermocouple 热电偶sand blasting 喷沙grit 砂砾derusting machine 除锈机degate 打浇口dryer 烘干机induction 感应induction light 感应光response=reaction=interaction 感应ram 连杆edge finder 巡边器concave 凹convex 凸short 射料不足nick 缺口speck 瑕疪shine 亮班splay 银纹gas mark 焦痕delamination 起鳞cold slug 冷块blush 导色gouge 沟槽;凿槽satin texture 段面咬花witness line 证示线patent 专利grit 沙砾granule=peuet=grain 细粒grit maker 抽粒机cushion 缓冲magnalium 镁铝合金magnesium 镁金metal plate 钣金lathe 车mill 锉plane 刨grind 磨drill 钻boring 镗blinster 气泡fillet 镶;嵌边through-hole form 通孔形式voller pin formality 滚针形式cam driver 铡楔shank 摸柄crank shaft 曲柄轴augular offset 角度偏差velocity 速度production tempo 生产进度现状torque 扭矩spline=the multiple keys 花键quenching 淬火tempering 回火annealing 退火carbonization 碳化alloy 合金tungsten high speed steel 钨高速的moly high speed steel 钼高速的organic solvent 有机溶剂bracket 小磁导liaison 联络单volatile 挥发性resistance 电阻ion 离子titrator 滴定仪beacon 警示灯coolant 冷却液crusher 破碎机模具工程类plain die 简易模pierce die 冲孔模forming die 成型模progressive die 连续模gang dies 复合模shearing die 剪边模riveting die 铆合模pierce 冲孔forming 成型（抽凸,冲凸） draw hole 抽孔bending 折弯trim 切边模具相关英语3emboss 凸点dome 凸圆semi-shearing 半剪stamp mark 冲记号deburr or coin 压毛边punch riveting 冲压铆合side stretch 侧冲压平reel stretch 卷圆压平groove 压线blanking 下料stamp letter 冲字（料号） shearing 剪断tick-mark nearside 正面压印tick-mark farside 反面压印冲压名称类extension dwg 展开图procedure dwg 工程图die structure dwg 模具结构图material 材质material thickness 料片厚度factor 系数upward 向上downward 向下press specification 冲床规格die height range 适用模高die height 闭模高度burr 毛边gap 间隙weight 重量total wt. 总重量punch wt. 上模重量五金零件类inner guiding post 内导柱inner hexagon screw 内六角螺钉dowel pin 固定销coil spring 弹簧lifter pin 顶料销eq-height sleeves=spool 等高套筒pin 销lifter guide pin 浮升导料销guide pin 导正销wire spring 圆线弹簧outer guiding post 外导柱stop screw 止付螺丝located pin 定位销outer bush 外导套模板类top plate 上托板（顶板）top block 上垫脚punch set 上模座punch pad 上垫板punch holder 上夹板stripper pad 脱料背板up stripper 上脱料板male die 公模（凸模） feature die 公母模female die 母模（凹模） upper plate 上模板lower plate 下模板die pad 下垫板die holder 下夹板die set 下模座bottom block 下垫脚bottom plate 下托板（底板） stripping plate 内外打（脱料板） outer stripper 外脱料板inner stripper 内脱料板lower stripper 下脱料板零件类punch 冲头insert 入块（嵌入件） deburring punch 压毛边冲子groove punch 压线冲子stamped punch 字模冲子round punch 圆冲子special shape punch 异形冲子bending block 折刀roller 滚轴baffle plate 挡块located block 定位块supporting block for location 定位支承块air cushion plate 气垫板air-cushion eject-rod 气垫顶杆trimming punch 切边冲子stiffening rib punch = stinger 加强筋冲子ribbon punch 压筋冲子reel-stretch punch 卷圆压平冲子guide plate 定位板sliding block 滑块模具工程常用词汇die 模具figure file, chart file 图档cutting die, blanking die 冲裁模progressive die, follow (-on)die 连续模compound die 复合模punched hole 冲孔panel board 镶块to cutedges=side cut=side scrap 切边to bending 折弯to pull, to stretch 拉伸Line streching, line pulling 线拉伸engraving, to engrave 刻印upsiding down edges 翻边to stake 铆合designing, to design 设计design modification 设计变化die block 模块folded block 折弯块sliding block 滑块location pin 定位销lifting pin 顶料销die plate, front board 模板padding block 垫块stepping bar 垫条upper die base 上模座lower die base 下模座upper supporting blank 上承板upper padding plate blank 上垫板spare dies 模具备品spring 弹簧bolt 螺栓document folder 文件夹file folder 资料夹to put file in order 整理资料spare tools location 手工备品仓first count 初盘人first check 初盘复棹人second count 复盘人second check 复盘复核人equipment 设备waste materials 废料work in progress product 在制品casing = containerazation 装箱quantity of physical invetory second count 复盘点数量quantity of customs count 会计师盘,点数量the first page 第一联filed by accounting department for reference 会计部存查end-user/usingunit(department) 使用单位summary of year-end physical inventory bills 年终盘点截止单据汇总表bill name 单据名称This sheet and physical inventory list will be sent to accounting department together (Those of NHK will be sent to financial department) 本表请与盘点清册一起送会计部－(NHK 厂区送财会部) Application status records of year-end physical inventory List and physical inventory card 年终盘点卡与清册使用－状况明细表blank and waste sheet NO.空白与作废单号plate 电镀mold 成型material for engineering mold testing 工程试模材料not included in physical inventory 不列入盘点sample 样品incoming material to be inspected 进货待验description 品名steel/rolled steel 钢材material statistics sheet 物料统计明细表meeting minutes 会议记录meeting type 会别distribution department 分发单位location 地点chairman 主席present members 出席人员subject 主题conclusion 结论decision items 决议事项responsible department 负责单位pre-fixed finishing date 预定完成日approved by / checked by / prepared by 核准/审核/承办PCE assembly production schedule sheet PCE 组装厂生产排配表model 机锺work order 工令revision 版次remark 备注production control confirmation 生产确认checked by 初审approved by 核准department 部门stock age analysis sheet 库存货龄分析表on-hand inventory 现有库存available material 良品可使用obsolete material 良品已呆滞to be inspected or reworked 待验或重工total 合计cause description 原因说明part number/ P/N 料号type 形态item/group/class 类别quality 品质prepared by 制表notes 说明year-end physical inventory difference analysis sheet 年终盘点差异分析表physical inventory 盘点数量physical count quantity 帐面数量difference quantity 差异量cause analysis 原因分析raw materials 原料materials 物料finished product 成品semi-finished product 半成品packing materials 包材good product/accepted goods/ accepted parts/good parts 良品defective product/non-good parts 不良品disposed goods 处理品warehouse/hub 仓库on way location 在途仓oversea location 海外仓spare parts physical inventory list 备品盘点清单spare molds location 模具备品仓skid/pallet 栈板tox machine 自铆机wire EDM 线割EDM 放电机coil stock 卷料sheet stock 片料tolerance 工差score=groove 压线cam block 滑块pilot 导正筒trim 剪外边pierce 剪内边drag form 压锻差pocket for the punch head 挂钩槽slug hole 废料孔feature die 公母模expansion dwg 展开图radius 半径shim(wedge) 楔子torch-flame cut 火焰切割set screw 止付螺丝form block 折刀stop pin 定位销round pierce punch=die button 圆冲子shape punch=die insert 异形子stock locater block 定位块under cut=scrap chopper 清角active plate 活动板baffle plate 挡块cover plate 盖板male die 公模female die 母模groove punch 压线冲子air-cushion eject-rod 气垫顶杆spring-box eject-plate 弹簧箱顶板bushing block 衬套insert 入块club car 高尔夫球车capability 能力parameter 参数factor 系数phosphate皮膜化成viscosity 涂料粘度alkalidipping 脱脂main manifold 主集流脉bezel 斜视规blanking 穿落模dejecting 顶固模demagnetization 去磁;消磁high-speed transmission 高速传递heat dissipation 热传rack 上料degrease 脱脂rinse 水洗alkaline etch 龄咬desmut 剥黑膜D.I. rinse 纯水次Chromate 铬酸处理Anodize 阳性处理seal 封孔revision 版次part number/P/N 料号good products 良品scraped products 报放心品defective products 不良品finished products 成品disposed products 处理品barcode 条码flow chart 流程表单assembly 组装stamping 冲压molding 成型spare parts=buffer 备品coordinate 座标dismantle the die 折模auxiliary fuction 辅助功能poly-line 多义线heater band 加热片thermocouple 热电偶sand blasting 喷沙grit 砂砾derusting machine 除锈机degate 打浇口dryer 烘干机induction 感应induction light 感应光response=reaction=interaction 感应ram 连杆edge finder 巡边器concave 凸convex 凹short 射料不足nick 缺口speck 瑕?? shine 亮班splay 银纹gas mark 焦痕delamination 起鳞cold slug 冷块blush 导色gouge 沟槽;凿槽satin texture 段面咬花witness line 证示线patent 专利grit 沙砾granule=peuet=grain 细粒grit maker 抽粒机cushion 缓冲magnalium 镁铝合金magnesium 镁金metal plate 钣金lathe 车mill 锉plane 刨grind 磨drill 铝boring 镗blinster 气泡fillet 镶;嵌边through-hole form 通孔形式voller pin formality 滚针形式cam driver 铡楔shank 摸柄crank shaft 曲柄轴augular offset 角度偏差velocity 速度production tempo 生产进度现状torque 扭矩spline=the multiple keys 花键quenching 淬火tempering 回火annealing 退火carbonization 碳化alloy 合金tungsten high speed steel 钨高速的moly high speed steel 钼高速的organic solvent 有机溶剂bracket 小磁导liaison 联络单volatile 挥发性resistance 电阻ion 离子titrator 滴定仪beacon 警示灯coolant 冷却液crusher 破碎机模具工程类plain die 简易模pierce die 冲孔模forming die 成型模progressive die 连续模gang dies 复合模shearing die 剪边模riveting die 铆合模pierce 冲孔forming 成型（抽凸,冲凸） draw hole 抽孔bending 折弯trim 切边emboss 凸点dome 凸圆semi-shearing 半剪stamp mark 冲记号deburr or coin 压毛边punch riveting 冲压铆合side stretch 侧冲压平reel stretch 卷圆压平groove 压线blanking 下料stamp letter 冲字（料号） shearing 剪断tick-mark nearside 正面压印tick-mark farside 反面压印冲压名称类extension dwg 展开图procedure dwg 工程图die structure dwg 模具结构图material 材质material thickness 料片厚度factor 系数upward 向上downward 向下press specification 冲床规格die height range 适用模高die height 闭模高度burr 毛边gap 间隙weight 重量total wt. 总重量punch wt. 上模重量五金零件类inner guiding post 内导柱inner hexagon screw 内六角螺钉dowel pin 固定销coil spring 弹簧lifter pin 顶料销eq-height sleeves=spool 等高套筒pin 销lifter guide pin 浮升导料销guide pin 导正销wire spring 圆线弹簧outer guiding post 外导柱stop screw 止付螺丝located pin 定位销outer bush 外导套模板类top plate 上托板（顶板）top block 上垫脚punch set 上模座punch pad 上垫板punch holder 上夹板stripper pad 脱料背板up stripper 上脱料板male die 公模（凸模）feature die 公母模female die 母模（凹模） upper plate 上模板lower plate 下模板die pad 下垫板die holder 下夹板die set 下模座bottom block 下垫脚bottom plate 下托板（底板） stripping plate 内外打（脱料板） outer stripper 外脱料板inner stripper 内脱料板lower stripper 下脱料板零件类punch 冲头insert 入块（嵌入件） deburring punch 压毛边冲子groove punch 压线冲子stamped punch 字模冲子round punch 圆冲子special shape punch 异形冲子bending block 折刀roller 滚轴baffle plate 挡块located block 定位块supporting block for location 定位支承块air cushion plate 气垫板air-cushion eject-rod 气垫顶杆trimming punch 切边冲子stiffening rib punch = stinger 加强筋冲子ribbon punch 压筋冲子reel-stretch punch 卷圆压平冲子guide plate 定位板sliding block 滑块sliding dowel block 滑块固定块active plate 活动板lower sliding plate 下滑块板upper holder block 上压块upper mid plate 上中间板spring box 弹簧箱spring-box eject-rod 弹簧箱顶杆spring-box eject-plate 弹簧箱顶板bushing bolck 衬套cover plate 盖板guide pad 导料块塑件& 模具相关英文compre sion molding 压缩成型flash mold 溢流式模具plsitive mold 挤压式模具split mold 分割式模具cavity 型控母模core 模心公模taper 锥拔leather cloak 仿皮革shiver 饰纹flow mark 流痕welding mark 溶合痕post screw insert 螺纹套筒埋值self tapping screw 自攻螺丝striper plate 脱料板piston 活塞cylinder 汽缸套chip 细碎物handle mold 手持式模具常用塑料英语缩略语英文简称英文全称中文全称ABA Acrylonitrile-butadiene-acrylate 丙烯腈/丁二烯/丙烯酸酯共聚物ABS Acrylonitrile-butadiene-styrene 丙烯腈/丁二烯/苯乙烯共聚物AES Acrylonitrile-ethylene-styrene 丙烯腈/ 乙烯/苯乙烯共聚物AMMA Acrylonitrile/methyl Methacrylate 丙烯腈/甲基丙烯酸甲酯共聚物ARP Aromatic polyester 聚芳香酯AS Acrylonitrile-styrene resin 丙烯腈- 苯乙烯树脂ASA Acrylonitrile-styrene-acrylate 丙烯腈/ 苯乙烯/丙烯酸酯共聚物CA Cellulose acetate 醋酸纤维塑料CAB Cellulose acetate butyrate 醋酸-丁酸纤维素塑料CAP Cellulose acetate propionate 醋酸-丙酸纤维素CE Cellulose plastics, general 通用纤维素塑料CF Cresol-formaldehyde 甲酚-甲醛树脂CMC Carboxymethyl cellulose 羧甲基纤维素CN Cellulose nitrate 硝酸纤维素CP Cellulose propionate 丙酸纤维素CPE Chlorinated polyethylene 氯化聚乙烯CPVC Chlorinated poly(vinyl chloride) 氯化聚氯乙烯CS Casein 酪蛋白CTA Cellulose triacetate 三醋酸纤维素EC Ethyl cellulose 乙烷纤维素EMA Ethylene/methacrylic acid 乙烯/甲基丙烯酸共聚物EP Epoxy, epoxide 环氧树脂EPD Ethylene-propylene-diene 乙烯-丙烯- 二烯三元共聚物EPM Ethylene-propylene polymer 乙烯-丙烯共聚物EPS Expanded polystyrene 发泡聚苯乙烯ETFE Ethylene-tetrafluoroethylene 乙烯- 四氟乙烯共聚物EVA Ethylene/vinyl acetate 乙烯-醋酸乙烯共聚物EVAL Ethylene-vinyl alcohol 乙烯-乙烯醇共聚物FEP Perfluoro(ethylene-propylene) 全氟(乙烯-丙烯)塑料FF Furan formaldehyde 呋喃甲醛HDPE High-density polyethylene plastics 高密度聚乙烯塑料HIPS High impact polystyrene 高冲聚苯乙烯IPS Impact-resistant polystyrene 耐冲击聚苯乙烯LCP Liquid crystal polymer 液晶聚合物LDPE Low-density polyethylene plastics 低密度聚乙烯塑料LLDPE Linear low-density polyethylene 线性低密聚乙烯LMDPE Linear medium-density polyethylene 线性中密聚乙烯MBS Methacrylate-butadiene-styrene 甲基丙烯酸-丁二烯-苯乙烯共聚物MDPE Medium-density polyethylene 中密聚乙烯MF Melamine-formaldehyde resin 密胺-甲醛树脂。
汽车冲压件中英文
英文名称中文名称INSTALL 安装ASSY 总成PANEL PNL 板PILLAR 柱DOOR DR 门HOOD 盖S/MBR 纵梁C/MBR 横梁BRACE 支柱BRACKET BRKT 支架HINGE 铰链BULKHEAD 隔板REINF 加强板FLOOR 地板UPR 上部LWR 下部LH 左侧RH 右侧FR 前侧RR 后侧OTR 外侧INR 内侧FR DR 前门RR DR 后门F/FLR 前地板R/FLR 后地板BAR S-IMPACT RR DR 后门侧防撞杆BAR FR END UPR 散热器上横梁BEAM RR BPR INR 后保防撞梁内板BEAM RR BPR OTR 后保防撞梁外板BRACE RR SHELF LH 后行李箱隔板左侧支柱BRACE RR SHELF RH 后行李箱隔板右侧支柱BRACE RR. FLOOR SIDE LH 后地板左边支柱BRACE RR. FLOOR SIDE RH 后地板右边支柱BRACE S/MBR TO FRT FLOOR LH 前纵梁与前地板左连接板BRACKET HOOD RELEASE (LHD) 发罩拉索支架BRACKET RR FLOOR SEAT MTG LH 左后座椅安装支架BRACKET RR FLOOR SEAT MTG RH 右后座椅安装支架BRK S-IMPACT RR FR DR LH 前门防撞杆后支架BRKT ANTI ZIPPER LH 前地板与门槛内板左连接板BRKT BUMPER 前保险杠支架BRKT CTR BPR MTG 后保险杠中部支架BRKT FASCIA MTG 保险杠安装支架BRKT FENDER LWR LH 左侧前轮挡泥板下部支架BRKT FENDER LWR RH 右侧前轮挡泥板下部支架BRKT FENDER UPR LH 左侧前轮挡泥板上部支架BRKT FENDER UPR RH 右侧前轮挡泥板上部支架BRKT FOOT REST (LHD) 踏脚板支架BRKT GLS GUIDE DOOR 玻璃导轨支架BRKT S-IMPACT CTR FR DR 前门防撞杆中支架BRKT S-IMPACT FR FR DR LH 前门防撞杆前支撑板BRKT S-IMPACT FR FR DR RH 前门防撞杆前支撑板BRKT S-IMPACT FR RR DR LH 左后门侧防撞杆前支架BRKT STRIKER 背门锁扣加强板BRKT SUPT S-IMPACT RR DR LH 左后门侧防撞杆支架BRKT SUPT S-IMPACT RR DR RH 右后门侧防撞杆支架BRKT UPR BUMPER MTG 保险杠安装上支架BRKT ENG MOUNT 发动机悬置支架BRKT SPRING HOUSE RH 右前悬挂上支座BRKT FUEL TANK COMMON 油箱安装左后支架BRKT TRAILING ARM INR LH 左后悬挂纵臂安装内支架BRKT TRAILING ARM INR RH 右后悬挂纵臂安装内支架BRKT TRAILING ARM OTR LH 左后悬挂纵臂外支架BRKT TRAILING ARM OTR RH 右后悬挂纵臂外支架BULKHEAD HINGE FRT LWR LH 左侧前门下部铰链加强板隔板BULKHEAD HINGE FRT LWR RH 右侧前门下部铰链加强板隔板BULKHEAD R/FLR S/MBR LH 后地板左纵梁隔板BULKHEAD R/FLR S/MBR RH 后地板右纵梁隔板BULKHEAD SILL 门槛隔板C/MBR BACKBONE 中央通道横梁C/MBR FR END OTR 散热器下横梁外板C/MBR R/FLR 后地板中横梁C/MBR R/SEAT 后地板前横梁下板C/MBR F/FLR LH 前地板左前横梁C/MBR F/FLR RH 前地板右前横梁C/MBR F/FLR RR LH 前地板左后横梁C/MBR FR END, INR CTR 散热器下横梁中内板C/MBR FR END, INR LH 散热器下横梁左内板CHNL GLS GUIDE FR FR DR LH 左前门玻璃导轨CHNL GLS GUIDE FR FR DR RH 右前门玻璃导轨CHNL GLS GUIDE FR RR DR LH 左后门玻璃导轨CHNL GLS GUIDE FR RR DR RH 右后门玻璃导轨CHNL GLS GUIDE RR FR DR RH 右前门后玻璃导轨CHNL GLS GUIDE UPR RR DR LH 左后门上玻璃导轨CHNL GLS GUIDE UPR RR DR RH 右后门上玻璃导轨EXT DASH PANEL LH 前围挡板左下板EXT DASH PANEL RH 前围挡板右下板EXT C/MBR R/FLR LH 后地板中横梁与纵梁左连接板FRAME FR UPR INR LH 左翼子板加强梁内板FRAME FR UPR INR RH 右翼子板加强梁内板FRAME FR UPR OTR LH 左侧翼子板上部边梁外板FRAME FR UPR OTR RH 右侧翼子板上部边梁外板FRONT S/MBR REAR LH 左前纵梁与地板纵梁连接板FRONT, S/MBR REAR RH 右前纵梁与地板纵梁连接板HINGE FUEL FILLER DR 加油口盖铰链HOOK, MUFFLER B/BONE 中央通道消音器挂钩PANEL A PILLAR LWR LH 左A柱下板PANEL A PILLAR LWR RH 右A柱下板PANEL AIR EXTRACTION BOX OTR LH 左侧排气盒外板PANEL AIR EXTRACTION BOX OTR RH 右侧排气盒外板PANEL B PILLAR INNER LH 左侧B柱盖板PANEL B PILLAR INNER LH 左侧B柱内板PANEL B PILLAR INNER RH 右侧B柱盖板PANEL B PILLAR INNER RH 右侧B柱内板PANEL BODY SIDE OTR LH 左侧围外板PANEL BODY SIDE OTR RH 右侧围外板PANEL CANTRAIL INNER LH 左侧上边梁内板PANEL CANTRAIL INNER RH 右侧上边梁内板PANEL COWL TOP INR (LHD) 空气盒内板PANEL EXT REAR FLR FRT 后地板前连接板PANEL EXT REAR FLR RR 后地板后加强板PANEL FRONT FENDER LH 左前翼子板PANEL FRONT FENDER RH 右前翼子板PANEL FRT HEADER LWR 顶盖前横梁下部板PANEL PILLAR FR INR LH 左A柱内板PANEL PILLAR FR INR LH 左侧A柱内板PANEL PILLAR FR INR RH 右A柱内板PANEL PILLAR FR INR RH 右侧A柱内板。
汽车模具英语
汽车冲压模具英语词汇Die / Tool= 模具Prog. Die=progressive die 级进模Ball bearing guide posts and bushings=球形滚珠导柱和轴套Casting die=铸造模Cage=套Part=钣件Rigidity=强度Die material=制模材料Thin=薄Tool design=模具设计Strip design=料条设计Using material thickness radii where sharp corners are shown on the part reduces the occurrence of chipped punch or die corners in the tool. =在尖角处使用与材料厚度一样的R角减少冲头碎裂或模具中有“刀口”Tool design approval=模具设计审核Tool design modification/revision=模具设计更改Tool parts design (detail）= 模具钣件设计（详细) Heeled die sets，internally heel form & trim sections=带箱根的模架，成形与切刃冲头带导引FMC Make=保丽龙制作Construction method=结构方法modification= 更改Check & measure=检查& 测试Machining= 机器加工Large machining=在大型机器上加工上下模架(铣、车等）Small machining=在小型机器上加工模块等Lower die trim inserts=下模切刃块Lower trim inserts retainer=下模切刃块承盘Assemble inserts=组立镶块Punch stripping plates=冲头压料板Assembly=组立Trim punch backing plates=切刃冲头背板NC Machining=NC雕刻加工Stripper window inserts=料条窗户镶块Fitting=研磨组立Spotting=合模Die tryout=试模Cushing stroke=缓冲行程Dowel pin=定位销Guide lift pin=导引升降销Assemble gas spring=安装氮气缸Stamp parts=冲钣件Adjustment=调试Run off parts=冲钣件Lower trim steels=下刃块Hit parts=冲钣件Section=冲头断面Lifters=提升器Trim punch=切刃冲头Coil=卷材jack screw hole=起重［千斤顶］螺旋孔Guide block=导引块Die set，lower plate=下模架Guide the coil through the tool=导引卷材Die set，upper plate=上模架layout inspection=全尺寸检验Die inspection ＆approval=模具检查和审核Stretch carriers=拉伸运送装置delivery=发货Punch stripping plates=冲头压料板Rejected=拒收Trim punch backing plates=切刃冲头背板Scrapped=报废Stripper window inserts=料条窗户镶块Rework=返工Heel plates=背托stop block=停止块Prepare for delivery=准备发货Hydro form 液压成形Key=键Shear=剪切For locating retainer blocks=承盘键Sensor=传感器For holding buttons or pilots=冲母座或导销键Stretch web=拉伸网For fixed heel or positive stop=镶根键Layout the parts=设计钣件Construction method=结构方法Preceding into the design=继续设计Manual Surface Grinder=手动平面磨床Guide the coil through the tool=导引卷材Spotting red=合模用丹红Checking aid /checking gage=检具Layout ink=试模用蓝墨水Jig=夹具Masking tape=黄色不透明胶带（遮蔽胶带）Fixture=夹具Pliers=尖嘴钳，老虎钳Ball bearing guide posts and bushings=球形滚珠轴套Cresent wrench=可调扳手Guide post=导柱Bushings=导套Pump pipe=泵管Using material thickness radii where sharp corners are shown on the part reduces the occurrence of chipped punch or die corners in the tool。
模具英语词汇大全
精品文档汽车冲压模具英语词汇Die / Tool= 模具Prog. Die=progressive die 级进模Ball bearing guide posts and bushings=球形滚珠导柱和轴套Casting die=铸造模Cage=套Part=钣件Rigidity=强度Die material=制模材料Thin=薄Tool design=模具设计Strip design=料条设计Using material thickness radii where sharp corners are shown on the part reduces the occurrence of chipped punch or die corners in the tool. =在尖角处使用与材料厚度一样的R角减少冲头碎裂或模具中有“刀口”Tool design approval=模具设计审核Tool design modification/revision=模具设计更改Tool parts design (detail) = 模具钣件设计（详细）Heeled die sets, internally heel form & trim sections=带箱根的模架，成形与切刃冲头带导引FMC Make=保丽龙制作Construction method=结构方法modification= 更改Check & measure=检查& 测试Machining= 机器加工Large machining=在大型机器上加工上下模架（铣、车等）Small machining=在小型机器上加工模块等Lower die trim inserts=下模切刃块Lower trim inserts retainer=下模切刃块承盘Assemble inserts=组立镶块Punch stripping plates=冲头压料板Assembly=组立Trim punch backing plates=切刃冲头背板NC Machining=NC雕刻加工Stripper window inserts=料条窗户镶块Fitting=研磨组立Spotting=合模Die tryout=试模Cushing stroke=缓冲行程Dowel pin=定位销Guide lift pin=导引升降销Assemble gas spring=安装氮气缸Stamp parts=冲钣件Adjustment=调试Run off parts=冲钣件Lower trim steels=下刃块Hit parts=冲钣件Section=冲头断面Lifters=提升器Trim punch=切刃冲头Coil=卷材jack screw hole=起重[千斤顶]螺旋孔Guide block=导引块Die set, lower plate=下模架Guide the coil through the tool=导引卷材Die set, upper plate=上模架layout inspection=全尺寸检验精品文档Die inspection & approval=模具检查和审核Stretch carriers=拉伸运送装置delivery=发货Punch stripping plates=冲头压料板Rejected=拒收Trim punch backing plates=切刃冲头背板Scrapped=报废Stripper window inserts=料条窗户镶块Rework=返工Heel plates=背托stop block=停止块Prepare for delivery=准备发货Hydro form 液压成形Key=键Shear=剪切For locating retainer blocks=承盘键Sensor=传感器For holding buttons or pilots=冲母座或导销键Stretch web=拉伸网For fixed heel or positive stop=镶根键Layout the parts=设计钣件Construction method=结构方法Preceding into the design=继续设计Manual Surface Grinder=手动平面磨床Guide the coil through the tool=导引卷材Spotting red=合模用丹红Checking aid /checking gage=检具Layout ink=试模用蓝墨水Jig=夹具Masking tape=黄色不透明胶带(遮蔽胶带) Fixture=夹具Pliers=尖嘴钳，老虎钳Ball bearing guide posts and bushings=球形滚珠轴套Cresent wrench=可调扳手Guide post=导柱Bushings=导套Pump pipe=泵管Using material thickness radii where sharp corners are shown on the part reduces the occurrence of chipped punch or die corners in the tool. =在尖角处使用与材料厚度一样的R 角减少冲头碎裂或模具中有“刀口”CMM=三次元测量仪Symmetric=对称的The axis of symmetry=对称轴Technical=技术上的Diagonal=对角线Heeled die sets, internally heel form & trim sections=带箱根的模架，成形与切刃冲头带导引One two three block=一二三模块Adjustable parallels=可调平行块Stop block=阻止块Granite Table=花岗岩平台Backing Plate=背板Plotter= .描绘器, 图形显示器, 绘图器, 坐标自记器, 标图员Shoulder Bolt=肩头螺丝(Stripper bolt)Belt Sander=带磨机Keeper Block=行程块Metal Cutting Band Saw=立式带锯床Corner Guide Block=导块Blanchard Grinder=大型平面磨床Dowel pin=定位销精品文档Joe Blocks=精密量块Set Screw=螺塞Whirly Gig=筒夹式冲子成形器Jig & fixture =夹具Chamfer Tools=倒角刀具组Checking fixture=检具Angle Plate=L形直角座Guide Block=导块Gage Pins=英寸塞规Plunger=柱塞Sine Plate (magnetic)=正弦磁台Pierce=冲孔Flute End Mill=硬质合金钢铣刀Wear Strip=耐磨板Mill Cutter=波纹粗铣刀（标准型）Mating area=组立的接触面C’bore/ counter bore=六角沉头铣刀Accommodate=适应Radius Dresser=砂轮修整器Wiping hard (very shiny)= 过分摩擦闭合[接触]（闪光）Boring Head & Boring Bar=搪孔器、搪刀杆Pin=销Increase the die clearance between the form steels=增加成形块间隙Reamer=绞刀Clearance=间隙Approval=确认Oil paper=油纸Impact wrench=气动扳手0-11” Micrometer=0-11”千分尺Air pin=空气销Trim line=切边bumper[‘bQmpE(r)] n.缓冲器+/-0.5mm unless otherwise specified 除非另有规定，否则公差为+/-0.5mmVendor [‘vendE(r), -dC:(r)] n.卖主Part tolerance=钣件公差stripper layout=排样图Ball nose=球刀drawing of panel #987415&16=钣件设计图（公差）Bore=镗Line tap=攻丝校直Arbor =柄轴；心轴Borer=镗刀，镗床Drill chuck=钻夹头Chamfer=倒角Button=冲母座Radius=半径Nitrogen Cylinder=氮气缸Coolant=切削液Pilot=导销Punch=冲头Retainer=承盘Distribution Blocks=接头座Button=冲母座Screw=螺丝Hose Straps=软管夹（塑料）Shop=车间精品文档Flat Feet Keepers=顶料销Crib=仓库Ejector Pin=顶出销CNC mill= CNC机床Spring=弹簧Jack=千斤顶Straight Port Adapter=直管接头Strips=料条Y-205 Hose=软管（塑料）Styrofoam [`stairEfEum]n.聚苯乙烯泡沫塑料（保丽龙材料）Short Neck Adapter=短接头Cut off=落料45。
非常实用的汽车零部件行业英语词汇
No. 142 one stroke
1.组装、冲压、喷漆、生产线词汇 不合规格 一行程 作业流程 作业员 氧化 料号 打包机 烤漆厂 补漆 脏污 栈板 栈板 个(根,块等) 踩踏板 企划部 塑料筐 塑料件 气动起子 采购订单 表面处理 来料不良 制程不良 铆合不良 职务 电源按键 电源线 准备 董事长 压板 加工 生产力 生产部门 流水线 生产单位 生产
机构专业词汇 No. 1.组装、冲压、喷漆、生产线词汇 磨损 加润滑油 气管 沾湿台 类模器 氩焊 组装线 自动起子 自动化 创可贴 条形码 条形码扫描仪 篮子 面板 No. 1.组装、冲压、喷漆、生产线词汇 生产日期码 不良品箱 不良标签 铆合不良 No. 1.组装、冲压、喷漆、生产线词汇 间隙过大 金属裸露 厂长 故障 锁紧(螺丝) 特性变更 送料机 送料不到位 终检 组装在一起 夹(治)具 设备 流水板 打包带折皱 食指 叉车 前板 热熔机 熔合 垃圾袋 垃圾箱 灰箕 治具 1 abrasion 2 add lubricating oil 3 air pipe 4 alcohol container 5 analog-mode device 6 argon welding 7 Assembly line 8 automatic screwdriver 9 automation 10 band-aid 11 barcode 12 barcode scanner 13 basket 14 bezel panel 36 D/C Date Code 37 defective product box 38 defective product label 39 defective to staking 71 excesssive gap 72 exposed metal/bare metal 73 factory director 74 failure, trouble 75 fasten 76 feature change 77 feeder 78 feeding is not in place 79 final inspection 80 fit together 81 fixture 82 flow board 83 fold of pakaging belt 84 forefinger 85 forklift 86 front plate 87 fuse machine 88 fuse together 89 garbage bag 90 garbage can 91 garbage container 92 gauge(or jig) 93 general manager 95 grease/oil stains 96 grinder 97 group leader/supervisor 98 head of screwdriver 99 Hi-pot test of SPS 101 hydraulic handjack 102 hydraulic machine 设备 评估 过多的缺陷 103 ID/C Identification Code 104 identifying sheet list 105 inch
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
24 左前纵梁后部本体加强板
FRONT-RAIL-EXTENSION-REINF-LH
25 右前纵梁后部本体加强板
FRONT-RAIL-EXTENSION-REINF-RH
26
左前纵梁前部内板
FRONT-INNER-RAIL-LH
27
右前纵梁前部内板
FRONT-INNER-RAIL-RH
28
后悬安装支架
ATTACH-ENGINE-REINFORCEMENT-RH
33
左前纵梁后部本体
FRONT-RAIL-EXTENSION-LH
34
右前纵梁后部本体
FRONT-RAIL-EXTENSION-RH
35
后纵梁左连接板
REAR-RAIL-CROSSMEMBER-BRACKET-LH
36
后纵梁右连接板
REAR-RAIL-CROSSMEMBER-BRACKET-RH
112
前挡板上加强梁
UPPER-DASH-PANEL-CROSSMEMBER
113
前端左安装支架
FRONT-BEAM-BUMPER-ATTACH-BRACKET-LH
114
前端右安装支架
FRONT-BEAM-BUMPER-ATTACH-BRACKET-RH
115
制动液壶安装支架
OIL-TANK-BRACKET
42
右后纵量侧盖板
REAR-RAIL-LATERAL-COVER-RH
43
左后纵梁后部
REAR-RAIL-EXTENSION-LH
44
右后纵梁后部
REAR-RAIL-EXTENSION-RH
45
后制动油管支架
REAR-BRAKE-TUBE-FIX-BRACKET
46
后保横梁安装板
REAR-BEAM-BUMPER-ATTACH-BRACKET
108 前挡板下横梁左连接板
LOWER-DASH-PANEL-CROSSMEMBER-BRKT
109 前挡板下横梁右连接板
LOWER-DASH-PANEL-CROSSMEMBER-BRKT
110
左前大灯上横梁
HEAD-LAMP-BACK-UPPER-CROSSM-LH
111
右前大灯上横梁
HEAD-LAMP-BACK-UPPER-CROSSM--RH
124
仪表板左支架
DASHBOARD-SUPP-BRACKET-LH
125
仪表板右支架
DASHBOARD-SUPP-BRACKET-RH-ASM
126
前挡板安装板
DASH_PANEL-PLATE
127
前挡板
DASH_PANEL
128
前挡板左侧加强板
DASH-PANEL-REINFORCEMENT-LH
CENTRAL-FRAME-BRACKET-LH
95
中通道右固定支架
CENTRAL-FRAME-BRACKET-RH
96
左前制动油管支架
FRONT-BRAKE-TUBE-FIX-BRACKET-LH
97
右前制动油管支架
FRONT-BRAKE-TUBE-FIX-BRACKET-RH
98
后围外板
RR-END-PANEL-OUTER
5
左前座椅横梁
FRONT-SEAT-CROSSMEMBER-LH
6
右前座椅横梁
FRONT-SEAT-CROSSMEMBER-RH
7
后地板后部本体
REAR-BACK-FLOOR
8
中通道前加强板
FRONT-TUNNEL-REINFORCEMENT
9
手制动后安装支架
REAR-HANDBRAKE-FIX-BRACKET
104 前挡板上横梁左连接板
UPPER-DASH-PANEL-CROSS-BRACKET
105 前挡板上横梁右连接板
UPPER-DASH-PANEL-CROSS-BRACKET-RH
106
水槽左端加强梁
UPPER-DASH-PANEL-REINF-LH
107
水槽右端加强梁
UPPER-DASH-PANEL-REINF-RH
REAR-LOWER_SUBFRAME_BRACKET
29
左前纵梁加强板
FRONT-RAIL-REINFORCEMENT-LH
30
右前纵梁加强板
FRONT-RAIL-REINFORCEMENT-RH
31
发动机左悬置加强板
ATTACH-ENGINE-REINFORCEMENT-LH
32
发动机右悬置加强板
左A柱加强板本体
153
右A柱加强板本体
154
左前门上铰链加强板
155
右前门上铰链加强板
156
左前门下铰链加强板
137
左侧围外板
138
右侧围外板
139
左尾灯加强板
140
右尾灯加强板
141
加油口盒内板
142
行李舱盖左侧顶梁
143
行李舱盖右侧顶梁
144
左后门锁加强板
145
右后门锁加强板
146
左A柱加强板上部
147
右A柱加强板上部
148
左A柱加强板支撑板
149
右A柱加强板支撑板
150
左B柱加强板
151
右B柱加强板
152
116
雨刮安装支架
WIPER-SUPPORT-BRACKET
117
前挡板下加强梁
FRONT-LOWER-CROSSMEMBER
118
前风挡下横梁
COWL-BAR-PANEL
119
空气室加强板
COWL-BAR-EXTENSION
120
排水槽本体
UPPER-DASH-PANEL
121
空调安装支架
DASH-PANEL-UP-HVAC-BRACKET
47
油箱左安装板
FUEL-TANK-FIX-REINF-LH
48
油箱右安装板
FUEL-TANK-FIX-RENINF-RH
49
油管左后固定支架
REAR-WEB-BRACKET-LH
50
油管右后固定支架
REAR-WEB-BRACKET-RH
51 油管左后固定支架加强板
REAR-WEB-BRACKET-REINFORCEMENT-LH
ISO-FIX-BRACKET SUBFRAME-ATTACH-REINFORCEMENT-LH SUBFRAME-ATTACH-REINFORCEMENT-RH
FRONT-RAIL-ATTACH-BRACKET-LH FRONT-RAIL-ATTACH-BRACKET-RH
FRONT-BEAM-BUMPER FRONT-UPPER-CRASH-BOX-LH FRONT-UPPER-CRASH-BOX-RH FRONT-LOWER-CRASH-BOX-LH FRONT-LOWER-CRASH-BOX-RH REAR-RAIL-ATTACH-BRACKET FRONT-TOW-HOOK-BRACKET REAR-UPPER-CRASH-BOX-LH REAR-UPPER-CRASH-BOX-RH REAR-LOWER-CRASH-BOX-LH REAR-LOWER-CRASH-BOX-RH GEARBOX-LEVER-FIX-BRACKET FRONT-HANDBRAKE-FIX-BRACKET CENTRAL-FUEL-TANK-REINF REAR-RAIL-CROSSMEMBER FRONT-RAIL-EXTENSION-LOWER-BRKT FRONT-RAIL-EXTENSION-LOWER-BRKT-RH
80 左前纵梁后部外连接板上板 FRONT-RAIL-EXTENSION-UPPER-BRKT-LH
81 右前纵梁后部外连接板上板
82
左前纵梁后部外连接板下加强 板
83
右前纵梁后部外连接板下加强 板
84
左后纵梁内加强板
FRONT-RAIL-EXTENSION-UPPER-BRKT-RH FRT-RAIL-EXTENS-LOWER-BRKT-REINF-LH FRT-RAIL-EXTENS-LOWER-BRKT-REINF-RH
99
行李箱缓冲块支架
DECKLID-STOP-BRACKET-POSITIONED
100
后围内板本体
RR-END-PANEL-INNER-W-O-REINF
101
行李箱锁扣安装板
DECKLID-LATCH
102
仪表板中固定支架
CENTER-DASHBOARD-BRACKET
103
空气滤清器加强板
HVAC-PROTECTION
122
前大灯左端板
HEAD-LAMP-SIDE-PANEL-ASM-LH
123
前大灯左端板
HEAD-LAMP-SIDE-PANEL-ASM-RH
NEW
前大灯左端板下支架
HEAD-LAMP-SIDE-PNL-LWR-BRKT-LH
NEW
前大灯右端板下支架
HEAD-LAMP-SIDE-PNL-LWR-BRKT-RH
65
前保右安装盒上板
66
前保左安装下板
67
前保右安装盒下板
68
后保防撞横梁固定板
69
前拖车钩支架
70
后保左安装盒上板
71
后保右安装盒上板
72
后保左安装盒下板
73
后保右安装盒下板