梅里埃产品目录2011
Masoneilan 产品介绍
- 28 C – 454 C
工艺连接： BW, SW, SE
Flanged,
13 GE Title or job number 4/7/2014
Masoneilan 调节阀 21000 系列
顶部导向式 单座直通式
口径：3/4” – 10”
压力等级：150 – 2500 Cv值：0.001 – 1000 温度范围： - 29 C – 427 C
7 GE Title or job number 4/7/2014
Masoneilan 先进的技术
* 调节阀顶部导向和底部导向技术的率先开发。
* 流量系数(Cv)及压力恢复系数(FL)概念的提出及在全 世界的推广使用。 * 可靠的调节阀口径计算及过程噪音预测方法。 * 第一台通用调节阀(Camflex)产品的研制成功及在全 世界的广泛应用。
Masoneilan 调节阀 80000 系列
顶部导向式 三通调节式
口径：3/4” – 16”
压力等级：150 – 600 Cv值：6 – 750
温度范围： - 29 C – 427 C
工艺连接： Flanged, BW
20 GE Title or job number 4/7/2014
15 GE Title or job number 4/7/2014
Masoneilan 调节阀 41005 系列
笼套导向式 直通式
口径：2” – 20”
压力等级：150 – 2500 Cv值：10 – 4000
温度范围： - 196 C – 566 C
工艺连接： Flanged, BW, SW, SE
梅里埃VITEK 2 Compact参数
梅里埃VITEK 2 Compact参数、最新一代应用经典生化方法进行细菌鉴定的全自动仪器，采用了国际金标准API的数据库并继承发展了VITEK第一代产品的自动化处理技术，集成了生物梅里埃几十年的技术和创新于一体，为当今最先进的细菌鉴定/药敏系统。
1、自动化程度高，操作简单易用。
2、数据库齐全，鉴定准确技术参数：一、鉴定原理：终点法、阈值法；比色、比浊动态分析法二、菌液浓度控制：液晶数显比浊仪，测量细菌浓度范围0.0-7.5麦氏单位。
多点测量，自动显示平均值。
三、自动加样：真空批量加样法，每批可同时处理10个试剂卡，每卡需菌悬液小于4ml四、自动处理测试卡：自动扫描卡片条码、自动核查卡片与标本资料、自动密封卡片、自动上载试卡，自动孵育，自动每15分钟进行一次检测、自动卸载完成卡，自动报告结果。
五、操作软件：Windows XP操作系统，简易易用图形界面。
六、打印机：激光打印机，自动打印实验结果。
七、一次性试卡：64孔鉴定/药敏卡片，带有条形码可指示卡片的序列号和测试的种类。
八、鉴定细菌范围：可全自动鉴定菌种400种，包括：革兰氏阴性杆菌(含大肠杆菌0157及非发酵菌)；革兰氏阳性菌（含猪链球菌1型、2型和7种李斯特菌）；酵母菌；需氧芽胞杆菌（含炭疽芽孢杆菌）；奈瑟菌、嗜血杆菌、弯曲菌；厌氧菌九、鉴定速度：95％常见细菌≤5小时；其中革兰氏阴性菌（GN）2～10小时，革兰氏阳性菌（GP）2～8小时十、药敏试验：满足革兰氏阴性及革兰氏阳性两大类细菌药敏试验，速度4—15小时，95％常见细菌药敏≤6小时；抗生素已含第4代头孢等十一、工作容量：30个试验卡十二、操作步骤：自动真空批量接种、自动扫描卡片条码、自动核查卡片与标本资料、自动密封卡片、自动上载试卡，自动孵育，自动检测、自动卸载废卡，自动报告结果十三、认证：ISO9001认证:OK；CE或FDA认证:OK；进口医疗器械注册证：OK服务承诺：百典网向您保证所售产品均为正品,并开具增值税普通发票或增值税专用发票.凭百典开具的发票和购买货品,可享受退货、换货、维修等服务，详情可浏览百典仪器网“售后服务”。
Bunn-O-Matic 产品说明书及部件目录
LCA-1ILLUSTRATED PARTS CATALOGDesigns, materials, weights, specifications, and dimensions for equipment or replacement partsare subject to change without notice.BUNN-O-MATIC CORPORATIONPOST OFFICE BOX 3227SPRINGFIELD, ILLINOIS 62708-3227PHONE: (217) 529-6601 FAX: (217) 529-664445720.0000G 09/16 ©2012 Bunn-O-Matic CorporationBUNN-O-MATIC COMMERCIAL PRODUCT WARRANTYBunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCR/MCP/MCA single cup brewers, ther-mal servers and ThermoFresh® servers (mechanical and digital) 1 year parts and 1 year labor.2) All other equipment - 2 years parts and 1 year labor plus added warranties as specified below:a) Electronic circuit and/or control boards - parts and labor for 3 years.b) Compressors on refrigeration equipment - 5 years parts and 1 year labor.c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts and labor for 4 years or 40,000 pounds of coffee, whichever comes first.These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality, damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty. THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EX-PRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive op-tion while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.392, A Partner You Can Count On, Air Infusion, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, Brew-WISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, iMIX, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, , Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh, Titan, trifecta, TRIFECTA (sylized logo), Velocity Brew, Air Brew, Beverage Bar Creator, Beverage Profit Calculator, Brew better, not bitter., Build-A-Drink, BUNNSource, Coffee At Its Best, Cyclonic Heating System, Daypart, Digital Brewer Control, Element, Milk Texturing Fusion, Nothing Brews Like a BUNN, Picture Prompted Cleaning, Pouring Profits, Signature Series, Sure Tamp, Tea At Its Best, The Horizontal Red Line, Ultra are either trademarks or registered trademarks of Bunn-O-Matic Corporation. The commercial trifecta® brewer housing configura-tion is a trademark of Bunn-O-Matic Corporation.245720 031314TABLE OF CONTENTSCabinet Assembly (8)Dispense Valve and Lines (14)Door Assembly (6)Electrical Components (18)Housing, Panels & Drip Tray (4)Inlet Valve & Tank Drain (12)Numerical Index (20)Pump Assembly (10)Tank Assembly (18)345720 091216445720 091216ITEMPART NO.QTY.DESCRIPTION5HOUSING, PANELS AND DRIP TRAY1 00824.0002 1 Decal, Ground Screw2 25137.0001 4 Foot3 43569.1003 1 Panel w/Decals, Rear (Includes items 5 & 6) 01311.00034 Screw, Truss Head BLK #8-32 x .25" 4 00986.0002 1 Decal, Warning - Electrical5 00656.0001 1 Decal, Comply to Plumbing Code6 00619.0010 1 Plug7 44089.0001 1 Panel, Left Side 01311.0003 5 Screw, Truss Head BLK #8-32 x .25" 8 44717.1000 1 Top Cover w/Decals (Includes items 11 & 12) 01311.0003 2 Screw, Truss Head BLK #8-32 x .25" 9 37881.0000 1 Decal, No Serviceable Parts 10 00669.0004 1 Plug11 37578.0001 1 Bracket, Upper Hinge 01311.0000 3 Screw, Truss Head #8-32 x .25" 12 29504.0004 1 Shoulder Screw 13 37825.0000 2 Spacer 14 21436.0000 2 Catch, Magnetic 15 00614.0001 1 Bushing 16 43578.1000 1 Drip Tray 17 43375.0000 1 Cover, Drip Tray18- - - - - - - -1Decal (See 44710.0000 on DOOR ASSY)45720 091216645720 091216ITEMPART NO.QTY.DESCRIPTION7DOOR ASSEMBLY-43334.10011Door Assembly (Includes items 1-12)1 43333.1001 1 Door 243654.00001Decal, Door Graphic (Bunn)3 43360.0000 1 Fill Button4 43359.0000 1 Retainer, Button5 44112.1000 1 Touch Screen Assy44646.00016Screw, Pan Head #6-25 x .625"6 38072.0000 1 H inge, Top44646.0001 2 Screw, Pan Head #6-25 x .625" 7 44709.0000 1 Decal, Cleaning 8 44710.0000 1 Decal, Tube Replacement 9 11646.0002 1 Decal, Warning - Hot Liquid 10 00713.0000 1 Bushing, Strain Relief11 34667.0000 1 Keeper, Door Latch (Early Models) 49626.1001 1 Latch Kit (Late Models) 01315.0000 2 Screw, Truss Head #8-32 x .38" 1244231.00001Wiring Harness, Door (Not Illustrated)45720 091216845720 091216ITEMPART NO.QTY.DESCRIPTION9CABINET ASSEMBLY1 12919.0006 1 Plug2 43572.0001 1 Bracket 01315.00003 Screw, Truss Head #8-32 x .38" 3 34533.0000 1 Plate4 34666.0000 1 Catch, Door Latch (Early Models) 49626.1001 1 Latch Kit (Late Models) 48817.0000 2 Screw, Pan Head #4-40 x .50"5 43351.0000 1 Bracket, Cabinet Shelf6 - - - - - - - - 1 Pump Assy (See PUMP ASSEMBLY)01317.00004Screw, Truss Head #8-32 x .50"7 44869.0001 1 Schematic, Electrical 844100.0203-Tube Assembly (Not Illustrated)45720 0912161045720 091216PUMP ASSEMBLYITEM PART NO. QTY. DESCRIPTION- 40261.1003 1 Pump Assy (Includes items 1 thru 23)1 34167.0000 1 Cover, Pump Block2 34997.0000 1 ThumbScrew3 32706.1000 1 RotorRing4 32652.0000 1 Retaining5 34998.0000 1 RetainingRingThreaded6 32928.0000 1 Insert,7 34166.1003 1 Block Assy, Pump (Includes items 6 & 14)8 02328.0003 4 Screw, Pan Head #6-32 x .312"9 01311.0001 1 Screw, Truss Head #8-32 x .25" Locking10 36149.0000 1 Fastener11 32609.0000 1 Standoff12 34765.0000 1 Nut, Flanged #10-3213 00617.0000 1 Cable Tie14 33825.0000 1 Bearing15 40263.0002 1 Bracket, Pump Mounting16 32927.0000 4 Screw, Shoulder #10-32 UNC17 40536.0000 1 Insulation, Pump18 32957.0000 4 Bushing19 34536.1001 1 Motor20 32654.0000 1 Magnet Hub21 01512.0000 1 Lockwasher, External-tooth #1022 01331.0004 1 Screw, Round Head, Locking #10-3223 33608.1000 1 Sensor, RPM02336.0000 2 Screw, Truss Head #4-40 x .38"INLET VALVE & TANK DRAINITEM PART NO. QTY. DESCRIPTION1 - - - - - - - - - Tank Assy (See TANK ASSEMBLY)00970.0000 4 Nut, Keps #8-322 1 Tube, Silicone .188" ID x 23.5" (Order item 8)(Early Models)1 Tube, Silicone .312" ID x 19.25" (Order item 9)(Late Models)37850.0000 2 Elbow (Late Models)3 1 Tube, Silicone .38" ID x 15.0" (Order item 7)4 11630.0001 1 Clamp, Shut off5 36233.1040 1 Valve, Water Inlet32283.0000 2 Screw, Pan Head M4 x 6mm6 37297.0001 1 Fitting, Elbow .25" Flare x .75" Hose7 20976.1001 - Tube, Silicone .38" ID x 36.0" (Use as required)20976.1002 - Tube, Silicone .38" ID x 120.0" (Use as required)8 42916.1001 - Tube, Silicone .188" ID x 36.0" (Use as required)42916.1002 - Tube, Silicone .188" ID x 120.0" (Use as required)9 03236.1000 - Tube, Silicone .312" ID x 12.0" (Use as required)03236.1001 - Tube, Silicone .312" ID x 36.0" (Use as required)03236.1002 - Tube, Silicone .312" ID x 120.0" (Use as required)03236.1003 - Tube, Silicone .312" ID x 60.0" (Use as required)DISPENSE VALVE & LINESITEM PART NO. QTY. DESCRIPTION1 - - - - - - - - - Tank Assy (See TANK ASSEMBLY)2 1 Tube, Silicone .125" ID x 8.5" (Order item 23)3 1 Tube, Silicone .313" ID x 1.5" (Order item 24)4 1 Tube, Silicone .313" ID x 6.0" (Order item 24)5 1 Tube, Silicone .313" ID x 12.25" (Order item 24)Coffee6 44012.0001 1 Tube,Water7 44013.0001 1 Tube,Dispense8 43362.0001 1 Nozzle,9 44713.1000 1 Hose Assy .125" ID (Also order item 25)10 12422.0007 1 Clamp .31/.34" ID11 35057.0000 1 Connector, Scholle 191012 35055.1000 1 Adapter Kit QCD11 (Includes items 13 - 17)13 33160.0000 1 Connector, QCD1114 1 Hose, Silicone .25" I.D. x 1.75" (Order item 26)15 35053.0000 1 Coupling, Reducing16 12422.0000 1 Clamp .47/.54" I.D.17 12422.0006 1 Clamp .53/.59" I.D.18 35056.1000 1 Adapter Kit Scholle QC (Includes items 15 - 17 & 19)19 35054.0000 1 Connector, Scholle QCItems 20 through 26 are Not Illustrated20 44100.0200 - Adapter Kit, Scholle 1910 (Incl. items 9,11 & 25)21 44100.0201 - Adapter Kit, QCD11 (Incl. items 9,13 & 25)22 44100.0202 - Adapter Kit, Scholle QC (Incl. items 9, 19 & 25)23 36630.1001 - Tube, Silicone .125" ID x 36.0" (Use as required)24 28526.1000 - Tube, Silicone .313" ID x 12.0" (Use as required)28526.1001 - Tube, Silicone .313" ID x 36.0" (Use as required)28526.1002 - Tube, Silicone .313" ID x 60.0" (Use as required)25 M2531.0001 - Lube Compound .30 oz.26 11707.1000 - Tube, Silicone .25" ID x 12.0" (Use as required)11707.1001 - Tube, Silicone .25" ID x 36.0" (Use as required)11707.1002 - Tube, Silicone .25" ID x 120.0" (Use as required)TANK ASSEMBLYITEM PART NO. QTY. DESCRIPTION1 43357.0001 1 Tank00908.0000 5 Nut, Hex #8-322 02838.1000 1 Tank Heater 1300W, 120V (Includes item 3)3 00943.0000 2 Gasket4 00942.0000 2 Nut, Hex .50"-20Thermostat5 29329.1000 1 Limit6 43354.0000 1 Gasket, Tank Lid7 43361.0001 1 TankLid00906.0000 10 Nut, Hex #6-3201510.0000 1 Lockwasher, External tooth #68 02536.0000 1 Grommet9 07412.1002 1 Probe Kit, Liquid Level (Includes hardware below)00908.0000 1 Nut, Hex #8-3220203.0100 1 Lockwasher, Internal tooth #801501.0000 1 Washer10 33801.0003 1 Grommet11 28891.1004 1 Probe, Temperature12 38969.0003 1 Fitting, Tank Vent13 37970.0000 2 Grommet14 39285.1001 1 Valve, Vented48977.0000 2 Screw, Hex Head w/washer #10-32 x .375"15 32345.1000 1 Valve, Unvented (Refer to item 16)16 32345.0050 - Repair Kit (Includes Armature and Diaphragm)ELECTRICAL COMPONENTS ITEM PART NO. QTY. DESCRIPTION1 29081.0002 6 Spacer2 43474.1000 1 Circuit Board, Main38123.0000 3 Screw, Pan Head #6-32 x 1.0"02301.0000 3 Screw, Pan Head BLK #6-32 x .62"3 39305.0000 1 Transformer00970.0000 2 Nut, Keps #8-324 00713.0000 1 Bushing, Strain Relief5 00715.0000 1 Adapter Washer, Strain Relief6 00991.0000 2 Nut,Grounding7 36484.0000 1 Clamp8 27437.0002 2 Switch9 34390.0000 2 Cap, Rocker SwitchItems listed below are not illustrated10 44234.0000 1 Wiring Harness, Main11 20630.0008 1 Power Cord12 44766.0001 1 Wiring Harness, TankNUMERICAL INDEXPART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO.00614.0001 (5)00617.0000 (11)00619.0010 (5)00656.0001 (5)00669.0004 (5)00713.0000......................7,19 00715.0000. (19)00824.0002 (5)00906.0000 (17)00908.0000 (17)00942.0000 (17)00943.0000 (17)00970.0000....................13,19 00986.0002 (5)00991.0000 (19)01311.0001 (11)01311.0003 (5)01315.0000........................7,9 01315.0005 (5)01317.0000 (9)01331.0004 (11)01501.0000 (17)01509.0001 (9)01510.0000 (17)01512.0000 (11)02301.0000 (19)02328.0003 (11)02336.0000 (11)02536.0000 (17)02838.1000 (17)03236.1000 (13)03236.1001 (13)03236.1002 (13)03236.1003 (13)07412.1002 (17)11630.0001 (13)11646.0002 (7)11707.1000 (15)11707.1001 (15)11707.1002 (15)12422.0000 (15)12422.0006 (15)12422.0007 (15)12919.0006 (9)20203.0100 (17)20630.0008 (19)20976.1001 (13)20976.1002 (13)21436.0000 (5)25137.0001 (5)27437.0002 (19)28526.1000 (15)28526.1001 (15)28526.1002 (15)28891.1004 (17)29081.0002.........................1929329.1000. (17)29504.0004 (5)32283.0000 (13)32345.0050 (17)32345.1000 (17)32609.0000 (11)32652.0000 (11)32654.0000 (11)32706.1000 (11)32927.0000 (11)32928.0000 (11)32957.0000 (11)33160.0000 (15)33608.1000 (11)33801.0003 (17)33825.0000 (11)34166.1003 (11)34167.0000 (11)34390.0000 (19)34533.0000 (9)34536.1001 (11)34666.0000 (9)34667.0000 (7)34765.0000 (11)34997.0000 (11)34998.0000 (11)35053.0000 (15)35054.0000 (15)35055.1000 (15)35056.1000 (15)35057.0000 (15)36149.0000 (11)36233.1040 (13)36484.0000 (19)36630.0006 (15)36630.1001 (15)37297.0001 (13)37578.0001 (5)37825.0000 (5)37850.0000 (13)37881.0000 (5)37970.0000 (17)38044.0000 (9)38072.0000 (7)38123.0000 (19)38969.0003 (17)39285.1001 (17)39305.0000 (19)40261.1003 (11)40263.0002 (11)40536.0000 (11)42916.1001 (13)42916.1002 (13)43333.1001 (7)43334.1001 (7)43351.0000 (9)43354.0000 (17)43357.0001 (17)43359.0000 (7)43360.0000 (7)43361.0001 (17)43362.0001 (15)43375.0000 (5)43474.1000 (19)43569.1003 (5)43572.0001 (9)43578.1000 (5)43654.0000 (7)44012.0001 (15)44013.0001 (15)44089.0001 (5)44100.0200 (15)44100.0201 (15)44100.0202 (15)44100.0203 (9)44112.1000 (7)44231.0000 (7)44234.0000 (19)44646.0001 (7)44709.0000 (7)44710.0000 (7)44713.1000 (15)44717.1000 (5)44766.0001 (10)44869.0001 (9)48817.0000 (9)48977.0000 (17)49626.1001........................7,9M2531.000 (15)。
(EC)No 143 2011REACH第一批需授权物质清单发布
REGULATIONSCOMMISSION REGULATION (EU) No 143/2011of 17 February 2011amending Annex XIV to Regulation (EC) No 1907/2006 of the European Parliament and of theCouncil on the Registration, Evaluation, Authorisation and Restriction of Chemicals (‘REACH’)(Text with EEA relevance)THE EUROPEAN COMMISSION,Having regard to the Treaty on the Functioning of the European Union,Having regard to Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC,93/67/EEC, 93/105/EC and 2000/21/EC ( 1 ), and in particularArticles 58 and 131 thereof,Whereas:(1) Regulation (EC) No 1907/2006 provides that substancesmeeting the criteria for classification as carcinogenic(category 1 or 2), mutagenic (category 1 or 2) and toxic for reproduction (category 1 or 2) in accordance with Council Directive 67/548/EEC of 27 June 1967 on the approximation of the laws, regulations and adminis trative provisions relating to the classification, packagingand labelling of dangerous substances ( 2 ), substances thatare persistent, bioaccumulative and toxic, substances that are very persistent and very bioaccumulative, and/or substances for which there is scientific evidence of probable serious effects to human health and environment giving rise to an equivalent level of concern may be subject to authorisation.(2) Pursuant to Article 58(4) of Regulation (EC) No1272/2008 of the European Parliament and of theCouncil of 16 December 2008 on classification,labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No1907/2006 ( 3 ), as from 1 December 2010Article 57(a), (b) and (c) of Regulation (EC) No 1907/2006 shall refer to the classification criteria laid down respectively in Sections 3.6, 3.5 and 3.7 of Annex I to Regulation (EC) No 1272/2008. Therefore, references in this Regulation to the classification criteria referred to in Article 57 of Regulation (EC) No 1907/2006 should be made in accordance with that provision.(3) 5-tert-butyl-2,4,6-trinitro-m-xylene (musk xylene) is verypersistent and very bioaccumulative in accordance withthe criteria for inclusion in Annex XIV to Regulation (EC) No 1907/2006 pursuant to Article 57(e) and set out in Annex XIII to that Regulation. It has been identified and included in the candidate list in accordance with Article 59 of that Regulation.(4) 4,4’-Diaminodiphenylmethane (MDA) meets the criteriafor classification as carcinogenic (category 1B) in accordance with Regulation (EC) No 1272/2008 and therefore meets the criteria for inclusion in Annex XIV to Regulation (EC) No 1907/2006 pursuant to Article 57(a) of that Regulation. It has been identified and included in the candidate list in accordance with Article 59 of that Regulation.(5) Alkanes, C10-13, chloro (Short Chain ChlorinatedParaffins – SCCPs) are persistent, bioaccumulative and toxic, and very persistent and very bioaccumulative in accordance with the criteria for inclusion in Annex XIV to Regulation (EC) No 1907/2006 pursuant to Article 57(d) and (e) respectively and set out in Annex XIII to that Regulation. They have been identified and included in the candidate list in accordance with Article 59 of that Regulation.( 1 ) OJ L 396, 30.12.2006, p. 1. ( 2 ) OJ 196, 16.8.1967, p. 1.( 3 ) OJ L 353, 31.12.2008, p. 1.(6) Hexabromocyclododecane (HBCDD) and the diaste reoisomers alpha-, beta- and gamma-hexabromocyclo dodecane are persistent, bioaccumulative and toxic in accordance with the criteria for inclusion in Annex XIV to Regulation (EC) No 1907/2006 pursuant to Article 57(d) and set out in Annex XIII to that Regu lation. They have been identified and included in the candidate list in accordance with Article 59 of that Regu lation.(7) Bis(2-ethylhexyl) phthalate (DEHP) meets the criteria forclassification as toxic for reproduction (category 1B) inaccordance with Regulation (EC) No 1272/2008 and therefore meets the criteria for inclusion in Annex XIV to Regulation (EC) No 1907/2006 pursuant to Article 57(c) of that Regulation. It has been identified and included in the candidate list in accordance with Article 59 of that Regulation.(8) Benzyl butyl phthalate (BBP) meets the criteria for clas sification as toxic for reproduction (category 1B) inaccordance with Regulation (EC) No 1272/2008 and therefore meets the criteria for inclusion in Annex XIV to Regulation (EC) No 1907/2006 pursuant to Article 57(c) of that Regulation. It has been identified and included in the candidate list in accordance with Article 59 of that Regulation.(9) Dibutyl phthalate (DBP) meets the criteria for classifi cation as toxic for reproduction (category 1B) in accordance with Regulation (EC) No 1272/2008 and therefore meets the criteria for inclusion in Annex XIV to Regulation (EC) No 1907/2006 pursuant to Article 57(c) of that Regulation. It has been identified and included in the candidate list in accordance with Article 59 of that Regulation.(10) The abovementioned substances have been prioritised forinclusion in Annex XIV to Regulation (EC) No1907/2006 by the European Chemicals Agency in its recommendation of 1 June 2009 ( 1 ) in accordance with Article 58 of that Regulation.(11) In December 2009, SCCPs were included as a persistentorganic pollutant under the 1998 Protocol on PersistentOrganic Pollutants to the 1979 Convention on Long- Range Transboundary Air Pollution. The inclusion of SCCPs in this Protocol has triggered additional obli gations for the European Union under Regulation (EC) No 850/2004 of the European Parliament and of the Council of 29 April 2004 on persistent organic pollutants and amending Directive 79/117/EEC ( 2 ) that could have an impact on the inclusion at this stage of SCCPs in Annex XIV to Regulation (EC) No 1907/2006.(12) For each substance listed in Annex XIV to Regulation(EC) No 1907/2006, where the applicant wishes tocontinue to use the substance or place the substance on the market, it is appropriate to set a date by which applications must be received by the European Chemicals Agency, in accordance with Article 58(1)(c)(ii) of that Regulation.(13) Foreach substance listed in Annex XIV to Regulation (EC) No 1907/2006 it is appropriate to set a date from which the use and placing on the market is prohibited, in accordance with Article 58(1)(c)(i) of that Regulation.(14) The European Chemicals Agency recommendation of1 June 2009 has identified different latest applicationdates for the substances listed in the Annex to this Regu lation. These dates should be set on the basis of the estimated time that would be required to prepare an application for the authorisation, taking into account the information available on the different substances and specifically the information received during the public consultation carried out in accordance with Article 58(4) of Regulation (EC) No 1907/2006. Factors such as the number of actors in the supply chain, their homogeneity or heterogeneity, the existence of ongoing substitution efforts and information on potential alternatives and the expected complexity of the preparation of the analysis of alternatives should be taken into account.(15) In accordance with Article 58(1)(c)(ii) of Regulation (EC)No 1907/2006, the latest application date is to be set atleast 18 months before the sunset date.(16) Article 58(1)(e) in conjunction with Article 58(2) ofRegulation (EC) No 1907/2006 provides for the possi bility of exemptions of uses or categories of uses in cases where there is specific Community legislation imposing minimum requirements relating to the protection of human health or the environment that ensures proper control of the risks.(17) DEHP, BBP, and DBP are used in the immediatepackaging of medicinal products. Aspects of safety ofthe immediate packaging of medicines are covered by Directive 2001/82/EC of the European Parliament and of the Council of 6 November 2001 on the Community code relating to veterinary medicinal products ( 3 ) and Directive 2001/83/EC of the European Parliament and of the Council of 6 November 2001 on the Community code relating to medicinal products for human use ( 4 ). That legislation of the Union provides for a framework to properly control risks of such immediate( 1 ) http://echa.europa.eu/chem_data/authorisation_pr ocess/annex_xiv_ rec_en.asp( 2 ) OJ L 158, 30.4.2004, p. 7.( 3 ) OJ L 311, 28.11.2001, p. 1. ( 4 ) OJ L 311, 28.11.2001, p. 67.packaging materials by imposing requirements on thequality, stability, and safety of the immediate packagingmaterials. It is therefore appropriate to exempt the use ofDEHP, BBP, and DBP in the immediate packaging ofmedicinal products from authorisation under Regulation(EC) No 1907/2006.(18) In accordance with Article 60(2) of Regulation (EC) No1907/2006, the Commission should not consider, whengranting authorisations, the human health risksassociated with the use of substances in medicaldevices regulated by Council Directive 90/385/EEC of20 June 1990 on the approximation of the laws of theMember States relating to active implantable medicaldevices (1), Council Directive 93/42/EEC of 14 June1993 concerning medical devices (2), or Directive98/79/EC of the European Parliament and of theCouncil of 27 October 1998 on in vitro diagnosticmedical devices (3). In addition, Article 62(6) of Regulation (EC) No 1907/2006 provides that applicationsfor authorisation should not include the risks tohuman health arising from the use of a substance in amedical device regulated under those Directives. Itfollows that an application for an authorisation shouldnot be required for a substance used in medical devicesregulated under Directives 90/385/EEC, 93/42/EEC, or98/79/EC if such a substance has been identified inAnnex XIV to Regulation (EC) No 1907/2006 forhuman health concerns only. Therefore, an assessmentas to whether the conditions for an exemptionpursuant to Article 58(2) of Regulation (EC) No1907/2006 apply is not necessary.(19)On the basis of the information currently available it isnot appropriate to set exemptions for product andprocess orientated research and development.(20)On the basis of the information currently available it isnot appropriate to set review periods for certain uses.(21) The measures provided for in this Regulation are inaccordance with the opinion of the Committee established pursuant to Article 133 of Regulation (EC)No 1907/2006,HAS ADOPTED THIS REGULATION:Article 1Annex XIV to Regulation (EC) No 1907/2006 is amended in accordance with the Annex to this Regulation.Article 2This Regulation shall enter into force on the third day following its publication in the Official Journal of the European Union.This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 17 February 2011.For the CommissionThe PresidentJosé Manuel BARROSO(1) OJ L 189, 20.7.1990, p. 17.(2) OJ L 169, 12.7.1993, p. 1.(3) OJ L 331, 7.12.1998, p. 1.ANNEXIn Annex XIV to Regulation (EC) No 1907/2006 the following table is inserted:(1) Date referred to in Article 58(1)(c)(ii) of Regulation (EC) No 1907/2006.(2) Date referred to in Article 58(1)(c)(i) of Regulation (EC) No 1907/2006.’。
Yantai1
办事机构: 北京 上海 成都 广州 香港 台北
生物梅里埃(中国)有限公司代理网络
北京威泰科 上海长源 上海祥和 广州千江 云南永兴
生物梅里埃解決方案
测试种类
(i) 食品定量 (细菌总数、大肠菌 群、真菌计数)
(ii) 定性/筛选 (沙门氏菌、李斯特菌 、弯曲菌 )
(iii)病源菌生化鉴定 (手工、自动、 全自动)
VIDAS 食品致病菌检测条
• 李斯特氏菌属(LIS) (AFNOR,AOAC批准) • 单核细胞增生李斯特氏菌(LMO2) (AFNOR批准) • 沙门氏菌(SLM) (AFNOR, AOAC批准) • 免疫浓缩沙门氏菌(ICS) (AFNOR,AOAC批准) • 葡萄球菌肠毒素(SET2) (日本政府) • 大肠埃希氏菌0157型(养基/ BACTOMETER
VIDAS 免疫分析仪
API / ATB VITEK
食物致病菌的快速检测
前增菌 选择性增菌
分离平板 初步鉴定 生化鉴定
食品 + 緩沖液
打碎
後增菌
分离及拓增目标 微生物
快速检测
血清学试验
快速鉴定
食品致病菌传统检测方法
样本
慢 ... 4 到 6 天 ... 烦锁
检测 前增菌 +选择性增菌
收的食品种类:
来源: USDA 及 FDA 报告
传统培养方法
• 多步骤的增菌程序 • 手工烦锁 • 孵育时间长
SN 0184-93單核 李斯特菌檢測方法
25 g 樣本 + 225 ml 前增菌肉湯
24小時孵育30 °c
48小時孵育 30 °c
Oxford 或 MMA 平板
24-48小時， 35 °c 挑 5個可疑菌落 生化鑒定
ATOMETAL AM-C-E防腐 修复 防护涂层 产品规格书
ATOMETAL ® AM-C-E 产品规格书防腐/修复/防护涂层1. 产品名称ATOMETAL ® AM-C-E保存期限抗弯曲性：基本剂与固化剂在5℃—30℃分置条件下 R = 1.5t 条件下完好无损的保存期为5年耐压试验2. 制造商使用寿命:100kgf/cm2无泄漏混合后材料使用寿命及覆涂间隔见下表耐热程度 :200~230℃涂覆率 :3. 产品类型干膜厚度200㎛时涂覆率为2.5M2/Kg 耐化学品 : 5%H2SO4或NaOH 环境168hours ，涂层无变化 耐油品：固化时间 :煤油168h 浸泡无异常200㎛厚度条件下，固化时间见下表。
耐汽油实际固化时间依据具体气候（温度168h 无异常湿度）及海拔条件影响发生变化耐臭氧性能：40℃±2℃(104℉±3.6℉)温度下，2ppm 浓度臭氧环境48hours 无影响5. 物理/机械性能耐热交变性 :20℃固化48h 后测量得出以下数据在-20℃ /80℃时冷热交变3周期无龟裂外观粘稠状抗压性能 (9.8Mpa) :颜色各种粘结强度 :负载区域完好无损密度 1.6±0.27~11 Mpa 耐夯打固含量> 90%73.5KN 锤击无异常固化剂成分抗张强度:抗冲击性能外观粘稠状200~400 kgf/cm21/2" 直径, 500g, 300㎜条件下无裂纹颜色淡黄色密度 1.3±0.2耐盐雾性 :固含量> 70%抗压强度 : 3.5% NaCl, 4000 hours 涂层无变化1,200kgf/cm2采用ASTM B368加速试验的标准检测涂膜厚度200㎛体积电阻68℉(20℃)条件下混合物性能柔韧性:1.0×10的12次方Ωm混合比例（重量比）心轴弯曲试验，Ø10㎜ 铁轴, 180˚依据ASTM D4399标准试验(基本剂 : 固化剂) 5 : 1弯曲无破裂混合比例（体积比）(基本剂 : 固化剂) 3 : 1混合外观粘稠状毒性 :混合后密度 1.64 g/㎤固化后无毒害项目20℃ 30℃可用时间1 Hour 30 min 复涂间隔(以下)8 Hours 6 Hours 表干时间 4 Hours 3 Hours 实干时间8 Hours6 Hours基本剂成分工业环境及埋地钢结构防腐蚀涂料B&B KOREA CO., Ltd.韩国京畿道抱川市加山面加山里474-24. 技术数据M-C-E 是以无机陶瓷粉末、少量粘性共聚物为主要成膜物质，并添加钨、钼等超微细金属粉末，经特殊工艺合成的新型高分子材料，其基本剂与固化剂混合后产生化学反应而自身放热，并且分子间交联形成三维网状结构，从而能与被涂体紧密结合适于工业、土壤腐蚀环境中的容器设备防腐, 具有良好的耐磨、耐化学品腐蚀性。
生物梅里埃API说明书 part1(1-49)
3
4
API
bioMérieux sa
API
bioMérieux sa
5
REF 10 100
API 10 S
G API 10 S
G-
11
08052E-CN-11/2000
API 10 S
10
35-37
24
(50
)
-50 API 105
-50
-1
-1
-1
(
)
-0.85% NaCl
5ml (ref. 20 230)
08052E-XL-CN-11/2000
1 2 3 4 7 18 24 34 42 50 60 66 74 81 89 96 110 118 122 128
05-02/006GB99023A/This document is not legally binding.BIOMERIUEUX reserves the right to modify specifications without.BIOMERIEUX and the blue logo.API are registered and protected trademarks belonging to biomerieux sa or one of its subsidiaries /Printed in France/THEPA McCann Healthcare/RCS Lyon B398 160 242
Shewanella putrefaciens
/
/
/
/
/
(Pseudomonas aeruginosa / fluorescens /
putida / Chryseobacterium indologenes / Pseudomonas spp / Sphingobacterium multivorum)
(2011_65_EU)RoHS指令豁免清单
RoHS指令豁免清单作者：HSF中心2012-04-25 15:05法规名称：关于在电子电气设备中限制使用某些有害物质指令法规简称：RoHS法规代号：2011/65/E UURoHS指令豁免清单序号RoHS豁免项目适用范围及期限1单端(紧凑型)荧光灯中的汞含量不超过(每盏)：1(a)普通照明用<30W：5毫克2011年12月31日到期；2011年12月31日至2012年12月31日执行3.5毫克；2012年12月31日后执行2.5毫克1(b)普通照明用≥30W且< 50W：5毫克2011年12月31日到期；2011年12月31日后执行3.5毫克1(c)普通照明用≥50W且< 150 W：5毫克1(d)普通照明用≥150 W：15毫克1(e)普通照明用，环状或方形结构，管径 ≤17毫米2011年12月31日前，无使用限制；2011年12月31日后执行7毫克1(f)特殊用途：5毫克2(a)普通照明用的双端线型荧光灯中的汞含量不超过(每盏)：2(a)(1)正常寿命的三基色荧光灯，管径< 9毫米(例如T2)：5毫克2011年12月31日到期；2011年12月31日后执行4毫克2(a)(2)正常寿命的三基色荧光灯，管径≥9毫米且≤17毫米(例如T5)：5毫克2011年12月31日到期；2011年12月31日后执行3毫克2(a)(3)正常寿命的三基色荧光灯，管径> 17毫米且≤28毫米(例如T8)：5毫克2011年12月31日到期；2011年12月31日后执行3.5毫克2(a)(4)正常寿命的三基色荧光灯，管径> 28毫米(例如T12)：5毫克2012年12月31日到期；2012年12月31日后执行3.5毫克2(a)(5)长寿命(≥2万5千小时)的三基色荧光灯：8毫克2011年12月31日到期；2011年12月31日后执行5毫克2(b)其它荧光灯中的汞含量不超过(每盏)：2(b)(1)管径> 28毫米的线型卤磷酸盐灯(例如T10和T12)：10毫克2012年4月13日到期2(b)(2)非线型卤磷酸盐灯(各种管径)：15毫克2016年4月13日到期2(b)(3)管径> 17毫米的非线型三基色荧光灯(例如T9)2011年12月31日之前，无使用限制；2011年12月31日后执行15毫克2(b)(4)其它普通照明用灯和特殊用灯(例如感应灯)2011年12月31日之前，无使用限制；2011年12月31日后执行15毫克3特殊用途的冷阴极荧光灯及外部电极荧光灯(CCFL和EEFL)中的汞含量不超过(每盏)：3(a)短型(长度≤500毫米)2011年12月31日之前，无使用限制；2011年12月31日后执行3.5毫克3(b)中型(长度> 500毫米且≤1500毫米)2011年12月31日之前，无使用限制；2011年12月31日后执行5毫克3(c)长型(长度> 1500毫米)2011年12月31日之前，无使用限制；2011年12月31日后执行13毫克4(a)其它低压放电灯中的汞(每盏)2011年12月31日之前，无使用限制；2011年12月31日后执行15毫克4(b)普通照明用的高压钠(蒸气)灯，其显色指数Ra > 60的，其汞含量不超过(每盏):4(b)-Ⅰ功率≤155W 2011年12月31日之前，无使用限制；2011年12月31日后执行30毫克4(b)-Ⅱ155W < 功率 ≤405 W 2011年12月31日之前，无使用限制；2011年12月31日后执行40毫克4(b)-Ⅲ功率> 405 W 2011年12月31日前，无使用限制；2011年12月31日后执行40毫克4(c)其它普通照明用的高压钠(蒸汽)灯中的汞含量不超过(每盏)：4(c)-Ⅰ功率≤155 W 2011年12月31日前，无使用限制；2011年12月31日后执行25毫克4(c)-Ⅱ155 W < 功率 ≤405 W 2011年12月31日前，无使用限制；2011年12月31日后执行30毫克4(c)-Ⅲ功率> 405 W 2011年12月31日前，无使用限制；2011年12月31后执行40毫克4(d)高压汞(蒸汽)灯(HPMV)中的汞2015年4月13日到期4(e)金属卤化物灯(MH)中的汞4(f)本附录中未提及的，其它特殊用途的放电灯中的汞5(a)阴极射线管的玻璃中的铅5(b)荧光管的玻璃中的铅含量不超过0.2%.6(a)铅作为合金元素，在加工用途的钢和镀锌钢中的含量不超过0.35%6(b)铝合金中的铅含量不超过0.4%6(c)铜合金中的铅含量不超4%7(a)高熔点型焊料中的铅(也就是铅基合金，其铅含量超过85%)7(b)用于服务器、存储器和存储阵列系统中的焊料中的铅，用于为交换、信号发送、传输的网络基础设备中及电信网络管理设施中的焊料中的铅。
梅里埃耗材
3. Slidex乳胶凝集测试系列 5.革兰氏染液、氧化酶试剂、触酶试剂 6.Genbox培养容器和厌氧培养箱 7.无菌接种环
梅里埃解决方案
Etest药敏条 ATB系统和试剂
梅里埃解决方案
ATB 与众不同的特点 优点一：经典的自动细菌分析系统，经过20余年的市场检验，不断 更新的数据库，保持了产品的延续性。全球用户数量>6000，市 场占有率高。 优点二：检测结果可信度高，ATB的试条已被全球各地的专家，用 户接纳为细菌检测的对照方法，为细菌鉴定的金标准。 优点三：拥有全面的鉴定，药敏种类，覆盖范围广泛，特别适用于 于标本量不多的中小型医院。 优点四：耗材成本低廉，可降低试验成本，增加收益。 优点五：系统故障率极低，皮实耐用，维修保养简单。
市场状况
Hale Waihona Puke 大量自动化设备闲置，标本上机检测率不高
市场竞争广泛（BD、西门子、国产品牌、药厂、 whonet） 机遇（2013年7月1日卫生部16号令）
销售专业化
自身的知识
产品知识 对你的产品和服务的良好了解 知道你的产品和服务能为客户带来的好处。
如何引导客户使用自动化设备
自动化药敏优势 1.药物种类多 2.筛查各种耐药机制种类齐全 3.实验流程标准化、自动化 给客户带来的价值 1.给临床完美的结果，获得临床认可 2.降低了劳动强度 3.可轻易获得各种统计数据 4.经济利益
中端客户销售
在现有销售基础上进一步发掘潜力
1.帮助客户增加标本量 2.帮助客户填补实验室空白项目 3.技术方面给予强力支持 4.仪器更新
中端客户销售
1.V2C仪器及耗材 2.Bact/alert 3D及耗材 3.NEW ATB鉴定卡及药敏卡 4. Slidex乳胶凝集测试系列 5.革兰氏染液、氧化酶试剂、触酶试剂 6.Genbox培养容器和厌氧培养箱 7.无菌接种环
4[1].27《鼓励进口技术和产品目录(2011版,含具体调整情况)(发各机电办)
![4[1].27《鼓励进口技术和产品目录(2011版,含具体调整情况)(发各机电办)](https://img.taocdn.com/s3/m/9dad342abcd126fff7050b2f.png)
修改 修改 修改 修改 修改 新增 新增 新增 新增 新增 新增
碎玻璃分选设备：处理能力≥12T/h；剔除物/破碎玻璃处理量≥1％；处理 后碎玻璃质量要求：磁性金属杂质≤0.1％，非磁性金属杂质≤2颗/25kg， 新增 石英、陶瓷、沙子等杂质≤1颗/25kg（杂质Ф＞2.5mm的）且≤4颗/25kg （杂质Ф＞0.9mm的） 玻璃热加工设备：玻璃器皿压吹生产设备（机速≥35个/分钟，16工位以 上）；高脚杯挺焊接拉伸机（机速≥35个/分钟，48工位以上）；激光爆口 新增 机（机速≥35个/分钟，36工位以上） 大型化学机械浆：年产10万吨以上；制浆设备和高速造纸机：工作车速 1000m/min以上 数控自由曲面车房设备：内渐近镜片粗、精磨机 全自动镀膜设备：用于树脂镜片专用镀膜 高折射的镜片材料研发、检测设备：光谱分析设备、光谱反射检测设备 无缝电脑提花横机 针织连续前处理和冷轧堆染色机生产线 松式筒子自动络筒机：卷绕速度≥1000米/分 页岩气分段压裂可钻式桥塞 水平段水平井射孔设备 致密岩石渗透率测试仪器：测试精度10 -10 md 高速精密平板切纸机：幅宽1650-2800mm，最大工作车速350m/min，切纸精 度±0.5mm 高速精密平板切纸机横切系统：幅宽1650-2800mm，最大工作车速 350m/min，最大切纸负载1000g/m2 20万吨/年以上乙烯氧氯化法VCM关键设备（氯化反应器、氧氯化反应器、 裂解炉等） 分散聚四氟乙烯连续密闭式干燥设备
-3 -9
新增
新增 新增 新增 新增 新增 新增 新增 新增 新增 新增 新增 新增 新增
高温碳化炉用人造石墨板、石墨保温硬毡 采棉机用采棉头
新增 新增
三、鼓励发展的重点行业
行 业 名 称 大型循环流化床锅炉设备制造 对二甲苯（PX）装置中连续重整和吸附分离设备制造 单机70万千瓦及以上、转轮直径11米及以上混流式水电设备及其关键配套 辅机设计和制造 大型（35万千瓦及以上、600米水头及以上）抽水蓄能水电机组及其关键配 套辅机制造 船舶控制与自动化、通讯导航、仪器仪表等船用设备及制造 数字化医学影像产品及医疗信息技术开发与制造 100万吨/年及以上乙烯成套设备制造技术开发及应用 国家级工程（技术）研究中心、国家认定的企业技术中心、重点实验室、 工程实验室、高新技术创业服务中心、新产品开发设计中心、科研中试基 地、实验基地建设 基于物联网技术的制造企业高效、高密度智能仓储系统开发和建设项目 新能源汽车专用零部件开发及制造 医药生物工程新技术、新产品开发 高技术绿色电池产品制造（无汞碱锰电池、氢镍电池、锂离子电池、高容 量密封型免维护铅酸蓄电池、燃料电池、锌空气电池、太阳能电池） 稀有、稀土金属深加工及其应用 删除 删除 删除 删除 删除 删除 修改 修改 新增 新增 新增 新增 新增
2011刹车片产品通用表格
28-TFT19-04465-60230
28-TFT20-04466-60070
28-TFT21-04465-YZZ65 28-TFT22-04465-33130
28-TFT23-04465-33060 28-TFT24-04466-50010 28-TFT25-04465-50030 28-TFT26-04466-50080 28-TFT27-04465-30330 28-TFT28-04466-20210 28-TFT29-04465-26030 28-TFT30-04465-26320 28-TFT31-04465-05130
999 OE-TRC09-41060-38UX2 OE-TRC10-41060-4M490 OE-TRC11-41060-VK190 OE-TRC12-41060-09W25 OE-TRC13-D106M-S28X6
41060-40U92 D106M-65E91 44060-31UX2
D4060-9N008
途安后
途安/速腾前
途锐前小片 途锐前大片 途锐后 途锐四方块前 途锐四方块后
431 698 151G 前碟刹皮
8E0 698 451 后碟刹皮
447 698 451A
4B0 698 151N 4D0 698 151N 4B0 698 151C
3D0 698 451A
7H0 698 451A 4E0 698 151F 8K0 698 151B 8K0 698 451B
D1060-ED51A 41060-40U92 41060-40U92
前碟刹皮 后碟刹皮 后碟刹皮 后碟刹皮 前碟刹皮 后碟刹皮 前碟刹皮 前碟刹皮 前碟刹皮 前碟刹皮 前碟刹皮 前碟刹皮 前碟刹皮
OE-TRC04-44060-AL586 44060-AL585 后碟刹皮
最新版的EC 1907 2006,REACH-SVHC物质清单
梅里埃产品目录2011
分子生物学
GEN-PROBE结核分枝杆菌检测分析仪及试剂 .............................................................44 HAIN结核分枝杆菌耐药快速检测系统.......................................................................... 46 NucliSENS核酸提纯及核酸扩增检测系统 ..................................................................... 48 DiversiLab微生物基因分型系统...................................................................................... 50
applicator synthetic tipped. E Transystem liquid Stuart without charcoal
plastic applicator synthetic tipped. E Transystem liquid Amies without charcoal
临床免疫学
QuickVue病毒细菌快速诊断试剂 ...................................................................................34 VIDAS全自动免疫荧光分析仪 .......................................................................................35 VIDAS试剂 ...................................................................................................................... 35 酶联免疫吸附试验分析系统/试剂 ..................................................................................39 血清检测............................................................................................................................ 41
甲氧西林
适应症
败血症主要用于耐青霉素葡萄球菌所致的各种感染，如败血症、呼吸道感染、脑膜炎、软组织感染等，也可 用于化脓性链球菌或肺炎球菌与耐青霉素葡萄球菌所致的混合感染。肺炎球菌、化脓性链球菌、其他链球菌或对 青霉素敏感的葡萄球菌感染则不应采用该品治疗。
用法用量
肌内注射或静脉滴注成人一次0.5～1.0g，每4～6小时一次，病情严重者剂量可增加，败血症和脑膜炎病人 的每天剂量可增至12g，小儿体重在40kg以下者，每6小时按体重12.5～25mg/kg，体重超过40kg者给以成人剂量。 新生儿体重低于2kg者，1～14天时每12小时按体重25mg/kg；15～30天时每8小时按体重25mg/kg；体重超过2kg 者，1～14天每8小时按体重25mg/kg；15～30天时每6小时按体重25mg/kg；早产儿的每天剂量为按体重25mg/kg 分次给予，但须谨慎使用。
对轻中度肾功能减退病人，甲氧西林的剂量可不作调整，但对严重肾功能减退病人，避免应用过大剂量，以 防神经系统等毒性反应的发生。由于该品在肝内代谢量较多，其血清半衰期较短，对严重感染采用的剂量仍可较 其他异恶唑组青霉素为大。如供肌内注射，每500mg加灭菌注射用水2.8ml；如供静脉注射，则每1g加灭菌注射用 水或氯化钠注射液10ml。静脉滴注甲氧西林的溶液浓度一般为20～40mg/ml（快速静脉滴注）。
综合本实验所用的3种检测方法，均可作为检测MRS的可靠方法，但从操作过程，仪器设备，实验条件，结果 敏感性和特异性综合考虑基层临床实验室可常规使用头孢西丁进行MRS的进行筛选。
副反应
心脏患儿，男，四个月，因咳嗽喘息三天来本院就诊，查体：T37．3℃，P120次/分，R30次/分，Wt8Kg， 咽充血，双肺呼吸音粗，可闻及散在干湿性罗音，心脏正常，腹平软，肝脾未及，肠鸣音存在。血Rt： HGB110g/L，WBC11．5×10?9/L，N53．2%，L6．1%。胸透：双肺纹理粗乱、模糊，可见斑片状阴影。入院诊断： 支气管肺炎，本患儿及其父母既往均无食物及药物过敏史，青霉素钠皮试阴性后，给予甲氧西林0．8静滴，用药 过程中患儿无哭闹及任何不适，用药3天病情好转，咳嗽喘息减轻，无发热。第三天静滴完药物1小时，患儿出现 烦躁、拒乳、哭闹，查体：面色苍白，口周及口唇紫绀，呼吸60次/分，急促，心率40次/分，节律不规，四肢末 梢发凉，考虑甲氧西林过敏，在给予吸氧的同时，建立静脉通道，给予肾上腺素0．3mg静推，氟美松2mg静推， 10%的葡萄糖酸钙稀释后静滴，经过上述处理病情无好转，5分钟后又给予肾上腺素0．3mg静推，面色渐红润，心 率上升到120次/分，四肢末梢温暖，患儿哭闹、烦躁消失。讨论
梅里埃诊断产品（上海）有限公司介绍企业发展分析报告
Enterprise Development专业品质权威Analysis Report企业发展分析报告梅里埃诊断产品（上海）有限公司免责声明:本报告通过对该企业公开数据进行分析生成，并不完全代表我方对该企业的意见，如有错误请及时联系;本报告出于对企业发展研究目的产生，仅供参考，在任何情况下，使用本报告所引起的一切后果，我方不承担任何责任:本报告不得用于一切商业用途，如需引用或合作，请与我方联系:梅里埃诊断产品（上海）有限公司1企业发展分析结果1.1 企业发展指数得分企业发展指数得分梅里埃诊断产品（上海）有限公司综合得分说明：企业发展指数根据企业规模、企业创新、企业风险、企业活力四个维度对企业发展情况进行评价。
该企业的综合评价得分需要您得到该公司授权后，我们将协助您分析给出。
1.2 企业画像类别内容行业医药制造业-化学药品制剂制造资质增值税一般纳税人产品服务联公司委托提供下列服务：资金运作和财务管1.3 发展历程2工商2.1工商信息2.2工商变更2.3股东结构2.4主要人员2.5分支机构2.6对外投资2.7企业年报2.8股权出质2.9动产抵押2.10司法协助2.11清算2.12注销3投融资3.1融资历史3.2投资事件3.3核心团队3.4企业业务4企业信用4.1企业信用4.2行政许可-工商局4.3行政处罚-信用中国4.5税务评级4.6税务处罚4.7经营异常4.8经营异常-工商局4.9采购不良行为4.10产品抽查4.12欠税公告4.13环保处罚4.14被执行人5司法文书5.1法律诉讼（当事人）5.2法律诉讼（相关人）5.3开庭公告5.4被执行人5.5法院公告5.6破产暂无破产数据6企业资质6.1资质许可6.2人员资质6.3产品许可6.4特殊许可7知识产权7.1商标7.2专利7.3软件著作权7.4作品著作权7.5网站备案7.6应用APP7.7微信公众号8招标中标8.1政府招标8.2政府中标8.3央企招标8.4央企中标9标准9.1国家标准9.2行业标准9.3团体标准9.4地方标准10成果奖励10.1国家奖励10.2省部奖励10.3社会奖励10.4科技成果11 土地11.1大块土地出让11.2出让公告11.3土地抵押11.4地块公示11.5大企业购地11.6土地出租11.7土地结果11.8土地转让12基金12.1国家自然基金12.2国家自然基金成果12.3国家社科基金13招聘13.1招聘信息感谢阅读:感谢您耐心地阅读这份企业调查分析报告。
kyb目录(2011版)
*厂家排名不分先后，按拼音顺序排序。
5
2011年新增型号
KYB 编号
车型
KYB 编号
车型
331035 东风本田 CR-V RD4/5/7/8/9 02.04-05.03 前右 331036 东风本田 CR-V RD4/5/7/8/9 02.04-05.03 前左
333517 东风悦达起亚 锐欧 07.01- 前左
338001 广州本田 飞度 08.07- 前右
334227 上海通用 别克 君越 06.03- 前
333490 东风悦达起亚 赛拉图 05.08- 前右
334503 东风悦达起亚 狮跑 07.11- 前左
333491 东风悦达起亚 赛拉图 05.08- 前左
334504 北京现代 途胜 05.11- 后右
333492 东风悦达起亚 赛拉图 05.08- 后右
334504 东风悦达起亚 狮跑 07.11- 后右
334501 334502
华泰现代 圣达菲 GF-SM24/27 00.07-07.12 前左
北京现代 途胜 05.11- 前右
331037 东风本田 CR-V RD4/5/7/8/9 05.04-07.03 前右 334502 东风悦达起亚 狮跑 07.11- 前右
331038 东风本田 CR-V RD4/5/7/8/9 05.04-07.03 前左 334503 北京现代 途胜 05.11- 前左
333516 北京现代 雅绅特 06.10- 前右
334507 现代(进口车)圣达菲 2WD/4WD 06.03- 前左
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
生物梅里埃产品目录2011
52
微生物产品 —— COPAN货号名称 Nhomakorabea包装
运送培养基
E Transystem plastic applicator Amies without charchoal. E Transystem alluminium applicator Amies
without charcoal. E Transystem plastic applicator Stuart without charchoal. E Transystem plastic applicator Amies with charchoal. E Transystem alluminium applicator Amies with charcoal. E Transystem liquid Amies without charcoal plastic
applicator synthetic tipped. E Transystem liquid Stuart without charcoal
plastic applicator synthetic tipped. E Transystem liquid Amies without charcoal
生物梅里埃产品目录2011
51
货号
VITEK MS 全自动快速质谱微生物检测系统................................................................29 乳胶快速鉴定试剂..........................................名........称..........................................................3包0 装 定向试验............................................................................................................................ 31 分枝杆菌检测.................................................................................................................... 32 尿道支原体检测................................................................................................................ 32
分子生物学
GEN-PROBE结核分枝杆菌检测分析仪及试剂 .............................................................44 HAIN结核分枝杆菌耐药快速检测系统.......................................................................... 46 NucliSENS核酸提纯及核酸扩增检测系统 ..................................................................... 48 DiversiLab微生物基因分型系统...................................................................................... 50
生物梅里埃
2011年产品目录
微生物
临床免疫
分子生物学
产品索引
货号
名称
微生物
包装
标本采集
COPAN采样拭子运送培养基 ............................................................................................2 air IDEAL空气微生物采样器 ............................................................................................6 分析前处理 PREVI Color Gram全自动革兰染片仪..............................................................................7 PREVI Isola全自动平板接种仪 .........................................................................................9 培养 干粉培养基........................................................................................................................ 10 成品培养基........................................................................................................................ 10 成品培养基(瓶状/管装).................................................................................................... 11 环境控制............................................................................................................................ 11 琼脂添加剂........................................................................................................................ 12 Hemoline手工培养血瓶 .................................................................................................... 13 BacT/ALERT 3D全自动细菌/分枝杆菌培养监测系统 ..................................................13 BacT/ALERT培养瓶 .........................................................................................................14 细菌培养用容器................................................................................................................ 15 鉴定及药敏 chromID产色鉴定培养基 .................................................................................................16 API细菌鉴定手工试剂条 .................................................................................................17 Etest试条目录.................................................................................................................... 19 NEW ATB自动细菌鉴定及药敏分析仪 ..........................................................................22 NEW ATB细菌快速及常规鉴定试剂条rapid ID32/ID32 ...............................................23 NEW ATB药敏测试 ..........................................................................................................24 VITEK试卡........................................................................................................................ 25 VITEK 2全自动微生物分析系统.....................................................................................26 VITEK 2 Compact 全自动微生物分析系统 ....................................................................27 VITEK 2/ VITEK 2 Compact 试卡 ...................................................................................28 VITEK 2 DensiCHEK Plus比浊仪 ...................................................................................28