0603LS.线艺绕线电感系列

•Higher inductance values than other 0603 inductors •Ferrite construction for high current handling

•Inductance values: 47 nH – 10 µH; 5% and 2% tolerance

100000

I n d u c t a n c e (n H )

10Frequency (MHz)

Typical L vs Frequency

Irms Derating

Designer’s Kit C347 contains 10 each of all 5% values Core material Ceramic/Ferrite

Terminations RoHS compliant silver-palladium-platinum-glass frit.Other terminations available at additional cost.Weight 4.8 – 6.2 mg

Ambient temperature –40°C to +85°C with I rms current, +85°C to +100°C with derated current

Storage temperature Component: –40°C to +100°C.Packaging: –40°C to +80°C

Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Temperature Coefficient of Inductance (TCL)+50 to +150 ppm/°C Moisture Sensitivity Level (MSL)1 (unlimited floor life at <30°C /85% relative humidity)

Mean Time Between Failures (MTBF)1 billion hours

Packaging

2000 per 7″ reel.Plastic tape: 8 mm wide, 0.23 mm thick,4 mm pocket spacing, 1.1 mm pocket depth

PCB washing Only pure water or alcohol recommended

Frequency (MHz)

Q f a c t o r

Typical Q vs Frequency

Ambient temperature (°C)

P e r c e n t o f r a t e d r m s

I

0603LS-51NX_L_51 @ 7.9 MHz 5,212 @ 7.9 MHz 14000.075 1.00Violet B10603LS-72NX_L_72 @ 7.9 MHz 5,212 @ 7.9 MHz 14000.12 1.40Brown B10603LS-101X_L_100 @ 7.9 MHz 5,212 @ 7.9 MHz 11500.13 1.40Red B10603LS-121X_L_120 @ 7.9 MHz 5,212 @ 7.9 MHz 11000.15 1.40Orange B10603LS-151X_L_150 @ 7.9 MHz 5,215 @ 7.9 MHz 10500.15 1.30Yellow B10603LS-181X_L_180 @ 7.9 MHz 5,215 @ 7.9 MHz 9500.15 1.30Green B10603LS-241X_L_240 @ 7.9 MHz 5,215 @ 7.9 MHz 8000.160.95Violet B10603LS-271X_L_270 @ 7.9 MHz 5,215 @ 7.9 MHz 7750.300.71Gray B10603LS-331X_L_330 @ 7.9 MHz 5,215 @ 7.9 MHz 7250.460.56White B10603LS-391X_L_390 @ 7.9 MHz 5,215 @ 7.9 MHz 6200.510.50Black B10603LS-471X_L_470 @ 7.9 MHz 5,215 @ 7.9 MHz 5400.620.42Brown B10603LS-561X_L_560 @ 7.9 MHz 5,215 @ 7.9 MHz 5250.440.55Red B10603LS-681X_L_680 @ 7.9 MHz 5,215 @ 7.9 MHz 2600.520.47Orange B20603LS-781X_L_780 @ 7.9 MHz 5,215 @ 7.9 MHz 4600.830.39Yellow B10603LS-821X_L_820 @ 7.9 MHz 5,215 @ 7.9 MHz 4100.690.40Green B20603LS-102X_L_1000 @ 7.9 MHz 5,215 @ 7.9 MHz 1900.810.40Blue B20603LS-122X_L_1200 @ 7.9 MHz 5,215 @ 7.9 MHz 1600.870.37Violet B20603LS-152X_L_1500 @ 7.9 MHz 5,215 @ 7.9 MHz 1000.960.35Gray B20603LS-182X_L_1800 @ 7.9 MHz 5,215 @ 7.9 MHz 80 1.10.35White B20603LS-222X_L_2200 @ 7.9 MHz 5,215 @ 7.9 MHz 68 1.20.32Black B20603LS-272X_L_2700 @ 7.9 MHz 5,215 @ 7.9 MHz 60 1.50.28Brown B20603LS-332X_L_3300 @ 7.9 MHz 5,215 @ 7.9 MHz 42 1.50.28Red B20603LS-392X_L_3900 @ 7.9 MHz 5,215 @ 7.9 MHz 40 1.60.28Orange B20603LS-472X_L_4700 @ 7.9 MHz 5,215 @ 7.9 MHz 34 2.10.26Yellow B20603LS-562X_L_5600 @ 7.9 MHz 5,215 @ 7.9 MHz 32 2.60.24Green B20603LS-682X_L_6800 @ 7.9 MHz 5,215 @ 7.9 MHz 31 3.10.20Black B20603LS-782X_L_7800 @ 7.9 MHz 5,215 @ 7.9 MHz 28 3.50.20Blue B20603LS-822X_L_8200 @ 7.9 MHz 5,215 @ 7.9 MHz 26 3.60.19Violet B20603LS-103X_L_10,000 @ 2.5 MHz 5,212 @ 2.5 MHz 25 4.80.18Gray B20603LS-153X_L_15,000 @ 2.5 MHz 5,220 @ 2.5 MHz 237.10.17White B20603LS-183X_L_18,000 @ 2.5 MHz 5,220 @ 2.5 MHz 227.60.16Brown B20603LS-223X_L_22,000 @ 2.5 MHz 5,222 @ 2.5 MHz 198.810.13Black B2

1.When ordering, specify

Tolerance:G =2%J Termination:L =S Packaging:C =7″ B =2.fixture in Agilent/HP correlation pieces.

3.Q measured on Agilent/HP

4.SRF measured using Agilent/HP 8753D network analyzer with Coilcraft SMD-D test fixture.

5.DCR measured on Cambridge Technology Micro-ohmmeter.

6.Current that causes a 15°C temperature rise from 25°C ambient.Because of their open construction, these parts will not saturate.

7.Electrical specifications at 25°C.

Refer to Doc 362 “Soldering Surface Mount Components” before soldering.

Note:

B1 = 0.040 ±0.004 in / 1,016 ±0,102 mm B2 = 0.046 ±0.004 in / 1,169 ±0,102 mm