孟山都中国官网--迪卡M753
ITT CANNON连接器手册中文版
冲压成形加工 36
冲压成形加工 37-38
机械加工 42
传感器器型号2 插座
铜合金镀银
19芯 插头
19芯
法兰插座/锁紧螺母 /线对线
铜合金镀锡、镀银、 铜合金镀锡、镀银、
镀金
镀金
机械加工 43
冲压成形加工 45
冲压成形加工 46-48
APD / ISO 15170
系列 类型
插针材料
插针型号 页码
37芯 插头
RoHS合规信息
ITT在全球所有的电子元件工厂实施了严格的产品控制 计划，使得Cannon、VEAM和BIW连接器产品系列满足欧 盟指令2002/95/EC（又称“减少有害物质”计划）的要求， 对于适当、具体的Cannon、VEAM或BIW产品，订购时可 以为产品编号加上前缀R，确保我们的客户收到符合RoHS 的产品，应用于其商业电子元件和设备中。由于大多数的 RoHS有害物质集中在特定的金属镀层和铅焊涂层上，符合 RoHS的ITT产品提供以下镀层精饰：非电镀镍，不锈钢， 阳极氧化铝和镀金。请注意，在订购板载连接器时，我们 推荐使用镀金替代锡铅焊接。
1/2芯连接器的应用包括： •起重机 •船上厨房 •天线和基站的电力供应
电力分配： •卡车 •牵引车
电气参数
工作电压 工作电流 接触电阻 耐电压 绝缘电阻
机械参数 耐用性 插合扭矩 静负荷,自由状态
48 VDC* 请看温度-电流曲线 0,4mΩ（最大） 1000VAC， 60秒 10 MΩ（最小）
50次插配循环 2Nm（最大） 350 N (ISO 15170-2, Sec. 4.6)
Cannon ҹBKAD/E㋏߫ ᠽሩᴎᶊ䴶ᵓ 䖲఼ˈᓎゟњ 㟾ぎϞⱘ䞠
韩国服装网站大全
/////www.gmarket.co.kr(韩国最大的购物网站，货量丰富，操作方便，极力推荐批发用，图片复制有特定方法。
淘宝不让超练接，请复制后在地址栏打开即可！谢谢您的合作）www.auction.co.kr（EBAY韩国网站，韩国第二大购物网站，图片复制有特定方法，淘宝不让超练接，请复制后在地址栏打开即可！谢谢您的合作）（韩国第三大购物网站，搜索货物不太方便，图片大部分可以复制,淘宝不让超练接，请复制后在地址栏打开即可！谢谢您的合作）www.gsestore.co.kr（韩国LG公司控股的大型购物网站，品牌货不少，图片大部分可以复制,淘宝不让超练接，请复制后在地址栏打开即可！谢谢您的合作）www.gseshop.co.kr（韩国LG公司控股的另一家大型购物网站，品牌货不少，图片大部分可以复制,淘宝不让超练接，请复制后在地址栏打开即可！谢谢您的合作） (操作简单，断货频率高，图片大部分可以复制.淘宝不让超练接，请复制后在地址栏打开即可！谢谢您的合作) (图片大部分可以复制)/ (新增的购物网站YY也蛮便宜的)http://www.10x10.co.kr/ (韩国文具办公用品专卖网站.超可爱超喜欢!)女装：/（本店是该品牌中国总代理，代购公式特定,9.5折代购）http://www.sibuya.co.kr/http://www.ilovepink.co.kr/http://www.qng.co.kr/ (免收韩国运费)/http://www.dreamgirls.co.kr/（免收韩国运费9.8折代购）http://www.mersh.co.kr/ (免收韩国运费9.9折代///http://www.cherrykoko.co.kr/ (免收韩国运费)/（本店是该品牌中国总代理，代购公式特定,9.5折代购）http://www.4chi.co.kr/http://www.blue21.co.kr// (免收韩国运费)/http://www.gonsee.co.kr//http://www.zzara.co.kr/http://www.sultang.co.kr//http://www.mangostar.co.kr/http://www.iwatoo.co.krhttp://www.i-w.co.krhttp://www.mimididi.co.kr//http://www.style-party.co.kr/http://www.alida.co.krhttp://www.whosgirl.co.kr/http://www.isunsoo.co.krhttp://www.cocomarine.co.krhttp://www.myfittingroom.co.krhttp://www.3b.co.krhttp://www.rangranggirl.co.kr//http://www.coolgirls.co.kr//http://www.eppn.co.kr/http://www.ddaddadda.co.kr///http://www.staz.co.kr////http://www.e-jade.co.kr//shop/main.php http://www.ogage.co.kr/index.asp/（免收韩国运费！）http://www.vogue.co.kr/http://sroom.co.krhttp://www.fashioncody.co.kr/main/index.php/http://www.myfiona.co.kr/html/mainm.html//http://www.orange-flower.co.kr/YY 新增网站：// http://www.mimididi.co.kr/ http://www.pinkbanana.co.kr/http://www.yoom.co.kr/http://www.magiegirl.co.kr/http://www.lovemarin.co.kr/ /http://www.fashionstory.co.kr/男女服饰综合网站/html/mainn.html（卖的商品大多都是健身穿的哦~~很漂亮的！练瑜伽和健身的MM可以看看哦）http://www.elstyle.co.kr/shop/home/envylook/http://www.kugigirl.co.kr/html/mainm.html /http://www.modlook.co.kr//http://www.ogage.co.kr/index.asp / (自己感觉还不做的网站哦）/http://kibikibi.co.kr/http://www.amicca.co.kr//http://modelroom.co.kr// //http://blushpink.co.kr/http://begirl.co.kr/ (网站里的歌超喜欢) http://cookie7.co.kr/http://www.danilove.co.kr/男装/童装/配饰网站男装：http://www.m2m.ne.kr/（本店是该品牌中国总代理，代购公式特定,9.5折代购!淘宝不让超练接，请复制后在地址栏打开即可！谢谢您的合作）http://www.bossboy.co.kr/ (本店是该品牌中国总代理,代购公式特定.9折代购!包国内快递费!淘宝不让超练接，请复制后在地址栏打开即可！谢谢您的合作)http://www.mitoshop.co.kr/http://www.gujelove.co.kr/(值得推荐男装网站.淘宝不让超练接，请复制后在地址栏打开即可！谢谢您的合作)http://www.1mile.co.kr/(专业男鞋网站.所有韩剧和现在最流行的男鞋尽在此网站.不过价格贵~!欢迎选购!)/http://www.3b.co.kr http://www.hotboom.co.kr/index.asp/index.php(值得推荐的男装网站就是到货速度太慢!一般要一个月左右.但是YY款式和质量都值得等待~所以小店推荐!!!淘宝不让超练接，请复制后在地址栏打开即可！谢谢您的合作)/（也是自己很喜欢男装网站呢）http://www.duluba.co.kr/（综合网站,本店是该网站中国代理商!代购公式特定!详情请看代购流程和店内公告!淘宝不让超练接，请复制后在地址栏打开即可！谢谢您的合作）http://www.alans.co.kr/FrontStore/iStartPage.phtml/shop/main/index.phphttp://mafiapeople.co.kr/http://www.jbros.co.kr/index.php http://www.showboy.co.kr/ http://www.hiphopboy.co.kr/http://www.codiok.co.kr////http://www.hommefeel.co.kr/鞋：http://lollypalm.co.kr/http://www.esoloist.co.kr/http://www.ddni.co.kr/http://www.t2r.co.kr/(一次购买4双以上可打原价9折)http://www.hollyshop.co.kr/首饰：http://windygirl.co.kr/http://www.bluemarine.co.kr/http://www.rucycat.co.kr/ /http://www.deim.co.kr/http://rucycat.co.kr/ http://www.vento.co.kr/html/mainm.html包包专卖http://www.09r.co.kr/http://www.alida.co.kr/http://www.amai.co.kr/http://www.amy-house.co.kr/http://www.audri.co.kr/http://www.babypink.co.kr///http://www.catsfly.co.kr//http://www.coolgirls.co.krhttp://www.cpin.co.kr/http://www.ddaddadda.co.krhttp://www.e-athome.co.kr/http://www.e-sroom.co.kr// http://www.fashionjockey.co.kr/ / / / http://www.gumzzi.co.kr/ / / / http://www.gumzzi.co.kr/ / http://www.hotpinky.co.kr/ / http://www.joyce.co.kr/http://www.kugigirl.co.kr/ lia.co.krhttp://www.luxuryroom.co.kr/ / / http://www.mimididi.co.kr/ http://nababa.co.kr// / http://www.pennyblue.co.kr http://www.pinkbanana.co.kr/ http://www.pink-panther.co.kr / http://www.pennyblue.co.kr http://www.pinkbanana.co.kr/ http://www.pink-panther.co.kr http://www.pinkygirl.co.kr/ http://www.puch.co.kr/ http://www.sisterbymin.co.kr/ http://www.s-mate.co.kr http://www.snfeel.co.kr/http://www.sroom.co.kr/http://www.styleby.co.kr//http://www.sultang.co.krhttp://www.thegrim.co.krhttp://www.themangosteen.co.kr/http://www.twang.co.kr/http://www.vanillapie.co.kr//http://www.wendygirl.co.kr/http://www.whosgirl.co.kr//选中的款式，不能复制：http://soho.gmarket.co.kr/detailview/Item.asp?goodscode=228393811。
953 963献给CAT磨礴机说明书
SMOOTH OPERATOR
Smoother response gives more precise control of the machine and implements. This makes overall operation easier and lets you take on detailed tasks.
THE RIGHT TOOL FOR
EVERY JOB
4 953/963 TRACK LOADERS
ADDED VERSATILITY
QUICK CHANGE ARTIST
FUSION QUICK COUPLER
PALLET FORKS
MULTI-PURPOSE BUCKET
RAKE
GENERAL PURPOSE BUCKET
6 953/963 TRACK LOADERS
ADVANSYSTM ADVANTAGE
Buckets come from the factory with Advansys™ bucket tips/adapter/locking system. Advansys tips are built to give you maximum productivity and the lowest bucket lifecycle cost for your toughest applications. Hammerless retention system means safe, fast removal and installation without special tools.
953/963 TRACK LOADERS 5
SAVE FUEL, SAVE MONEY
CN7800系列温度控制器说明书
P-49Reguladores de rampa/meseta de 1⁄16 DINMonitorice y controle las aplicaciones de proceso o temperatura con precisión utilizando los reguladores serie CN7800. La serie CN7800 proporciona pantallas de LED dobles para una indicación local del valor del proceso y el valor del punto de referencia. Los métodos de control incluyen encendido y apagado, PID, ajuste automático y ajuste manual. El control de PID se admite con 64 acciones de control de rampa/meseta. Existen dos salidas de alarma adicionales estándar en la serie CN7800. Las salidas de la alarma pueden configurarse rápidamente utilizando las 13 funciones de alarma incorporadas. El regulador se comunica fácilmente con la interfaz RS485 incorporada.U P antalla doble U A juste automático U E ntrada universalU8 programas de rampa/meseta, 8 segmentos cada uno U F unciones de enlace y repetición programables U C omunicaciones RS485U S oftware gratuito U E stándar de 2 alarmasEspecificacionesEntradas: Termopar, RTD, voltaje de CC o corriente CC Pantalla: D os LED de 4 dígitos, 7 segmentos, 6,35 mm dealto (0,25") (PV: rojo, SV: verde)Resolución: 1,0, 0,1 para termopares (excepto los tipos R,S y B)Precisión: I ntervalo de ±0,25%, ±1 dígito menos significativo Voltaje de suministro: 100 a 240 Vca, 50/60 Hz Consumo de energía: 5 VA máx.Temperatura de funcionamiento: 0 a 50 °C (32 a 122 °F)Copia de seguridad de memoria: Memoria no volátil Especificaciones de salida de control: Relé: SPST , 5 A @ 250 Vca resistivaImpulso de voltaje: 14V , 10 @ -20% (máx. 40 mA) Corriente: 4 a 20 mAAlarmas: SPST, 3 A a 250 Vca resistiva Comunicación: P rotocolo de comunicación RS485MODBUS ® A-5-11/RTUPeso: 114 g (4 onzas)Marco frontal: 48 mm 2 (1,89 pulg 2)Corte del panel: 45 mm 2 (1,77 pulg 2)Máximo grosor de panel: 9,50 mm (0,375")Profundidad del panel: 80 mm (3,15")* Descarga gratuita de software CN7-A disponible en /cn7800OMX-R250 (se vende por separado). Disponible en /cn7800Serie CN7800Completo de serie con manual del operador.Ejemplos de pedidos: CN7823, regulador de salida doble, impulso de CC, salida de relé mecánico y comunicaciones RS485. CN7853, salida doble, 4 a 20 mA, relé, dos alarmas.。
全国户外店铺
北京户外店铺、俱乐部1.Dolomite（多洛迈特）08年夏季在北2.户外时代网3.桑温特户外用品4.长天户外5.北京饕拾贰户外运动俱乐部6.大地漫游旅行者俱乐部7.北京山水行户外运动俱乐部8.绿人中国上海户外店铺、俱乐部1.上海熔岩户外运动俱乐部2.上海游侠俱乐部3.上海壹加壹户外运动俱乐部4.白浪户外5.上海驴屋6.上海趣游俱乐部7.全新TEVA上海南方友谊商城概念店5月8.三夫户外上海第四家店虹许路店将于4天津户外店铺、俱乐部山知行户外店坚石·游骑兵户外运动俱乐部任我行户外天津塘沽新店即将于08年5 天津捷豹户外装备店天津达泰休闲运动用品商贸有限公司山知行户外用品店艾迪野营俱乐部阿尔卑斯登山攀岩俱乐部重庆户外店铺、俱乐部∙07-24重庆纵难轻履探险俱乐部∙07-24重庆行云户外用品有限公司∙09-07重庆拓荒者户外用品店两路口店∙09-07重庆拓荒者户外用品店江北店∙09-07重庆市漫步者户外用品店∙09-07重庆市在路上旅游户外用品店∙09-07重庆市蜀山户外探路者户外用品专卖09-07重庆旅行家户外店河北户外店铺、俱乐部∙07-24河北保定巅峰户外拓展运动中心∙07-24长城人户外拓展公司∙07-24保定市地平线户外运动俱乐部∙09-07保定颠峰户外∙09-07指南针户外∙09-07保定红色巅峰高尚户外运动俱乐部∙09-07标点户外∙09-07河北石家庄清峰户外用品专卖店河南户外店铺、俱乐部∙07-24河南户外运动联盟∙09-07凯曼户外休闲用品商店∙09-07欧多旅行装备用品店∙09-07郑州超越户外用品店∙09-07欧多旅行装备用品店∙09-07郑州超越户外用品店∙09-07鹤壁红枫树户外∙09-07开封阳光户外山东户外店铺、俱乐部∙07-24动力巅峰俱乐部∙07-24青岛红黄蓝野外生存俱乐部∙07-24济南火鸟户外运动俱乐∙01-11青岛迪卡侬辽阳店∙山东菏泽壁虎户外用品店于11月15号∙09-07山东自由兵户外用品总店∙09-07山东自由兵户外用品张店分店∙09-07烟台山鹰户外俱乐部山西户外店铺、俱乐部∙07-24行者户外∙09-07太原文苑户外用品有限公司∙09-07山西行者户外用品专营店∙09-07山野户外∙09-07山水户外用品专营店∙09-07自由虎户外运动俱乐部∙09-07自由虎户外运动俱乐部∙09-07山西晋城凤台东街探路者专卖店黑龙江户外店铺、俱乐部∙07-24牡丹江自助行户外运动∙09-07哈尔滨市傲古雅户外用品店∙09-07周末心情户外用品店∙09-07哈尔滨桃园都市户外运动用品店∙09-07哈尔滨博雨户外旅行用品店∙09-07哈尔滨火凤凰户外旅行休闲馆∙09-07哈尔滨金祥户外装备店吉林户外店铺、俱乐部∙09-07吉林奇峰户外运动俱乐部国贸店∙09-07吉林奇峰户外运动俱乐部国贸店∙09-07吉林卡米亚户外运动用品店∙09-07吉林省长春市探路者专卖∙09-07吉林省长春市奥索卡专卖∙09-07吉林飞龙户外运动俱乐部∙09-07吉林盈嘉户外运动俱乐部∙陕西户外店铺、俱乐部∙05-04西安重點戶外第四家独立门店高新店∙04-29绿蚂蚁野外用品西安骡马市店今日正∙09-07西安黑牦牛户外旅行用品店∙09-07西安·朗森户外用品店∙09-07汉中绿蚂蚁户外用品店∙09-07西安绿蚂蚁户外用品店∙09-07西安市高山兄弟户外用品店∙09-07针叶林户外辽宁户外店铺、俱乐部∙07-23窗外探索者俱乐部∙07-23沈阳山旅野外探险俱乐部∙07-23西可户外运动俱乐部∙07-23红蚂蚁户外运动俱乐部∙07-23风雨同行户外运动俱乐部∙07-23青旅户外俱乐部∙09-07雪狐户外皇姑店（雪狐户外4号店）09-07A room with a view 看得见风景的房甘肃户外店铺、俱乐部07-24兰州大玩家户外运动俱乐部09-07甘肃省兰州探路者专卖店09-07兰州天翔户外用品装备店09-07兰州大玩家户外用品装备店09-07甘肃兰州无极户外用品店09-07兰州无极户外用品装备店09-07兰州新阳光户外用品装备店09-07兰州新阳光户外装备店青海户外店铺、俱乐部09-07青海西宁万通探路者专柜09-07青海极星户外09-07西宁万通探路者专柜09-07青海西宁万通探路者专柜09-07青海极星户外09-07西宁万通探路者专柜09-07海西宁万通探路者专柜09-07青海极星户外安徽户外店铺、俱乐部05-24安徽九华户外拓展中心07-24马鞍山信天游户外运动俱乐部江苏户外店铺、俱乐部07-29野营旅户外拓展训练07-29驴行天下户外运动俱乐部07-23镇江小熊06-05南京边城户外新店5月正式开业营业01-11南京迪卡侬雨花店01-11无锡迪卡侬锡山店09-07马鞍山信天游户外装备中心09-07牧云人户外俱乐部浙江户外店铺、俱乐部07-23宁海县山水驴友俱乐部07-23大视野户外旅游用品店01-11杭州迪卡侬大关店09-07杭州拓人户外用品店09-07浙江路力户外用品店09-07风行者户外店09-07小兵户外09-07杭州风雪户外-狮虎桥店福建户外店铺、俱乐部10-20武夷山候鸟家驴友驿站07-23福州山夫远足俱乐部09-07福州哥仑步户外运动用品商店09-07泉州毅者行户外用品店09-07漳州山鹰户外09-07泉州翔鹰户外用品店09-07泉州毅者行户外DOITE旗舰店09-07福建省福鼎市山友驿站江西户外店铺、俱乐部09-07南昌出发站户外用品店09-07翔鹰旅行户外用品店09-07江西球迷屋户外09-07探路者南昌太平洋专柜湖北户外店铺、俱乐部10-28香港尚拓户外武汉硚口店01-03湖北五岳归来户外装备09-07十堰山岩部落户外09-07THE NORTH FACE 武广腾龙店（武广五09-07南昌探路者专卖店09-07萍乡山水旅游户外用品店09-07赣州探路者专买店09-07磨坊、户外运动基地09-07武汉市汉阳区翱翔户外体育用品店09-07江汉路步行街运动人探路者专柜(腾龙09-07风云驿站（武汉）户外休闲旅行用品09-07恩施旅行家户外旅游用品湖南户外店铺、俱乐部07-24赫拉克户外运动俱乐部07-24沙漠野狼俱乐部07-24湖南衡阳天狼星户外运动俱乐部07-24长沙畅行天下户外运动俱乐部07-24长沙喜马拉雅户外运动俱乐部09-07长沙爬山虎户外旅行用品店09-07长沙喜马拉雅户外运动用品专营店09-07长沙畅行天下户外用品店广东户外店铺、俱乐部05-31广州市GoOut户外运动用品店01-16户外我爱品牌连锁08-01挑战者户外运动俱乐部07-21北纬30度户外运动俱乐部07-21广州域高户外运动有限公司XGoNow域07-21天马行空户外俱乐部07-21绿卡户外网站07-21珠海户外运动网广西户外店铺、俱乐部02-17广西酷峰户外旅行用品店09-07柳州野人户外运动旅行装备店09-07桂林雅努斯户外.徒步者只家装备店09-07桂林康美文化艺术有限公司09-07柳州伞兵户外运动用品店09-07南宁绿色之旅户外用品店09-07曼哥夫广西梧州市梦之岛专柜09-07桂林市唯盛户外休闲用品有限公司海南户外店铺、俱乐部09-07海南极域户外运动俱乐部09-07海口美兰探路者专卖店09-07海口美兰探路者专卖店09-07驴虫耍家户外文化运营机构四川户外店铺、俱乐部05-04四川省成都市阿伯辛户外运动07-23山驴户外俱乐部01-11成都迪卡侬天府店09-07自由基地户外用品店09-07攀枝花游牧人户外用品店09-07成都顶点户外用品店09-07成都酷羚户外用品店09-07成都市极光户外--跳伞塔店云南户外店铺、俱乐部12-29[推荐]昆明户外拓展就选择-地平线体07-24丽江犀牛户外俱乐部07-24昆明卓越坚峰户外拓展培训中心07-24西双版纳探险俱乐部09-07昆明山友户外09-07诺户外主题军事主题09-07昆明市极地户外旅游用品店09-07云南省昆明市奥特多户外用品店贵州户外店铺、俱乐部09-07贵阳山水户外旅游用品专卖店09-07阿尔曼户外用品店09-07遵义露营者户外旅游用品商行09-07贵州驴之族户外用品经营部09-07贵州极地户外内蒙古户外店铺、俱乐部07-29内蒙古呼伦贝尔市海拉尔草原人户外07-29起点户外运动俱乐部09-07内蒙古呼和浩特红色营地户外用品专09-07包头三夫户外用品连锁店09-07内蒙古三夫户外店09-07呼和浩特首府广场-探路者旗舰店新疆户外店铺、俱乐部07-24新疆深度旅行网07-24梦驼户外探险俱乐部07-24乌鲁木齐市雷鸟探险俱乐部07-24小羊军团09-07新疆塞人部落户外用品店09-07乌鲁木齐市经纬线户外用品装备店09-07新疆三夫户外用品09-07任我行乌鲁木齐加盟店宁夏户外店、俱乐部暂时没有相应新闻。
曼谷机械制造有限公司 CN20, CN34系列非弹簧返回直接耦合闸簧操纵器产品数据说明书
® U.S. Registered TrademarkEN0B-0320CH33 R0803ACopyright © 2008 Honeywell Inc. • All rights reservedCN20, CN34 SERIESNON-SPRING RETURN DIRECT-COUPLED DAMPER ACTUATORS FOR FLOATING / 2-POSITION CONTROLPRODUCT DATAGENERALThese direct-coupled damper actuators provide two-position and floating control for: • air dampers, • VAV units, • air handlers, • ventilation flaps, • louvers, and• reliable control for air damper applications with up to4.6 m 2 / 50 sq.ft. (20 Nm / 177 lb-in) or 7.8 m 2 / 85 sq. ft. (34 Nm / 300 lb-in) (seal-less dampers; air friction-dependent).FEATURES• Self-centering shaft adapter• Access cover to facilitate connectivity • Service/off for safe & easy servicing • Rotation direction selectable by switch • Declutch for manual adjustment • Mechanical end limits• Field-installable auxiliary switches• Mountable in any orientation (no IP54 if upside down) • Mechanical position indicator•CE and UL certified (230V models with CE only)SPECIFICATIONSSupply voltageCN6120/CN6134 24 Vac/dc ±15%, 50/60 Hz CN4620/CN4634 230 Vac ±15%, 50/60 Hz Nominal voltage CN6120/CN6134 24 Vac/dc, 50/60 Hz CN4620/CN4634 230 Vac, 50/60 HzAll values stated hereinafter apply to operation under nominal voltage conditions. Power consumption CN6120 6 VA / 3 W CN4620 8 VA / 3 W CN6134 6 VA / 3 W CN4634 10 VA / 4 W Ambient limitsAmbient operating limits -20...+60 °C (-5...+140 °F) Ambient storage limits -40...+80 °C (-40...+175 °F) Relative humidity 5...95%, non-condensing SafetyProtection standard IP54 as per EN 60529 Protection class II as per EN 60730-1 Overvoltage category III Lifetime Full strokes 60000Repositions 1.5 million MountingRound damper shaft 10...27 mm (3/8...1-1/16") Square damper shaft 10...18 mm (3/8...11/16");45° steps Shaft length min. 22 mm (7/8") End switches (when included) Rating 5 A (resistive) / 3 A (inductive) Triggering points 5° / 85° Torque rating CN6120 / CN4620 20 Nm (177 lb-in) CN6134 / CN4634 34 Nm (300 lb-in) Runtime 95 sec (60 Hz) / 110 sec (50 Hzor DC supply)Rotation stroke 95° ± 3° Dimensions see "Dimensions" on page 6 Weight (without cables) 1.35 kg (3 lbs.) Noise rating 40 dBA max. at 1 mCertification CE CN6120 / CN6134 CN4620 / CN4634UL CN6120 / CN6134CN20, CN34 SERIES DAMPER ACTUATOR FOR FLOATING AND 2-POS CONTROLEN0B-0320CH33 R0803A 2MODELSModel # DescriptionCN6120A1002 20Nm,24Vac/Vdc, Floating/2-position control, Non-Spring Return, No feedback and without aux. Switch CN4620A1001 20Nm,230V,Floating/2-position control, Non-Spring Return, No feedback and without aux. SwitchCN6134A1003 34Nm,24Vac/Vdc, Floating/2-position control, Non-Spring Return, No feedback and without aux. Switch CN4634A1001 34Nm,230Vac, Floating control/2-position, Non-Spring Return, No feedback and without aux. SwitchProduct Identification SystemFig. 1. Product Identification SystemOPERATION / FUNCTIONSFig. 2. Setting units and control elementsLegend for Fig. 2:1 Self-centering shaft adapter2 Retainer clip3 Rotational angle scales (0...90° / 90...0°)4 Mechanical end limits5 Declutch button6 Anti-rotation bracket7 Function selection switch8 Access coverContents of PackageThe delivery package includes the actuator itself, parts 1 through 8 (see Fig.2), the anti-rotation bracket screws, and installation instruction.RUN MODESThe function selection switch (see Fig. 3) can be used to place the actuator into any one of three different modes: • Dir, floating/2-position control, cw run. • Service/Off, actuator stop running. • Rev, floating/2-position control, ccw run. 12 3 4 5 67 8CN20, CN34 SERIES DAMPER ACTUATOR FOR FLOATING AND 2-POS CONTROL3 EN0B-0320CH33R0803AFig. 3. Function selection switchPower-Off BehaviorIf power is removed, the actuator retains its position.Service/OffIf the function selection switch is set to the "Service/Off" position, all rotary movement is cancelled, and all control signals are ignored, thus allowing the actuator to be safely manually operated.Floating/2-Position Run ModeIf the function selection switch has been set to one of the two floating/2-position control settings (Dir or Rev) and theactuator is wired correspondingly (see A1 and A2) as soon as the operating power is applied, the actuator will run according to the power appliedTable 1 describes the behavior (stops, rotates CCW, orrotates CW) of the CN6120/CN6134 in relation to the control signals (switch "open" or "24Vac/dc") applied to terminals 3 and 4, the function selection switch setting, and the manner in which the actuator is wired (either for floating mode: see A1, or for 2-position mode: see A2).Table 1. Behavior of CN6120/CN6134 Control signal at Function selection switchWiringterm. 3 term. 4 Dir Service/Off Revopen open stops stops stopsopen 24Vac/dc CCW stops CW Float. 24Vac/dc open CW stops CCW 24Vac/dc open CW stops CCW2-pos.24Vac/dc 24Vac/dc CCW stops CWTable 2 shows the same actuator behavior as Table 1, but for CN4620/CN4634 (230Vac models).Table 2. Behavior of CN4620/CN4634 Control signal at Function selection switchWiring term. 3 term. 4 Dir Service/Off Rev open open stopsstops stops open 230Vac CCW stops CW Float. 230Vac open CW stops CCW230Vac open CW stops CCW2-pos.230Vac 230Vac CCW stops CWSleep ModeWhen actuator reaches end stop or any obstacles blocking its running, it will fall into sleep mode automatically. Actuator willperiodically start up and try to resume running, which will save energy significantly through whole service life.Position IndicationThe hub adapter indicates the rotation angle position by means of the rotational angle scales (0...90° / 90...0°) provided in the actuator plate (see Fig. 4).Fig. 4. Position indicationManual AdjustmentI MPORTANTTo prevent equipment damage, you must remove power or set the rotation direction switch to the "Service/Off" position before manual adjustment.After removing power or setting the rotation direction switch to the "Service/Off" position, the gear train can be disengaged using the declutch button, permitting the actuator shaft to be manually rotated to any position.Limitation of Rotation StrokeTwo adjustable mechanical end limits (adjustable in 5° increments) are provided to limit the angle of rotation as desired (see Fig. 5).Fig. 5. Mechanical end limits The mechanical end limits must be securely fastened in place.It is important that they properly mesh with the rotational angle scales when the screws are tightened.Internal End SwitchesNOTE: Applicable to models with internal switches only.CN20, CN34 SERIES DAMPER ACTUATOR FOR FLOATING AND 2-POS CONTROLEN0B-0320CH33 R0803A 4The internal end switches are set to switch from "common" to "normally open" at angles of 5° and 85°, respectively, from the totally counterclockwise position.-Fig. 6. Internal end switch triggering pointsINSTALLATIONThese actuators are designed for single-point mounting.I MPORTANTIn order to prevent equipment damage, you mustremove power or set the rotation direction switch to the "Service/Off" position before manual operation.Mounting InstructionsAll information and steps are included in the installation instructions supplied with the actuator.Mounting PositionThe actuators can be mounted in any position (no IP54 if mounted upside down; see Fig. 7). Choose a mounting posi-tion permitting easy access to the actuator's cables and controls.Fig. 7. Mounting for IP54Mounting Bracket and ScrewsIf the actuator is to be mounted directly on a damper shaft, use the mounting bracket and screws included in the delivery package.Self-Centering Shaft AdapterThe self-centering shaft adapter can be used for shafts having various diameters (10...27 mm [3/8...1-1/16"]) and shapes (square or round).In the case of short shafts, the shaft adapter may be reversed and mounted on the duct side.Stroke Limitation with Mechanical End LimitsThe mechanical end limits enable the stroke to be limited from 0...90° in increments of 5°.WiringConnecting to the Power SupplyIn order to comply with protection class II, the power source of 24 V actuators must be reliably separated from the network power supply circuits as per DIN VDE 0106, part 101.Access CoverTo facilitate wiring the actuator to the controller, the access cover can be detached from the actuator.I MPORTANTRemove power before detaching the access cover. Once the access cover has been removed, please take care to avoid damaging any of the parts now accessible.Fig. 8. Access cover (models with internal switches)Depending upon the model, the access cover may have one or two terminal strips, including a layout with a description for each of the terminals.Fig. 9. Actuator with access cover removed(models with internal switches)CN20, CN34 SERIES DAMPER ACTUATOR FOR FLOATING AND 2-POS CONTROL5 EN0B-0320CH33 R0803AWiring diagramsA1 CN6120,CN4620CN6134,CN4634 FLOATINGA2 CN6120,CN4620CN6134,CN4634 2-POSA3 END SWITCHS(models with switch only)NOTE: Internal end switches S1 and S4 must be connected to the same power source. Below 2 tables summarize the information presented in the preceding wiring diagrams.WiringModelsTerminalFloating 2-position2 common ┴/─ common ┴/─3 24V ~/+ (clockwise) 24V ~/+ CN6120,CN6134 supply and signal lines(must be equipped with spark suppressors)4 24V ~/+ (counterclockwise) 24V ~/+ control signal 2 common ┴/─ common ┴/─ 3 230Vac (clockwise) 230Vac CN4620,CN4634 supply and signal lines(must be equipped with spark suppressors) 4 230Vac (counterclockwise) 230Vac control signalConnecting cableTerminal Description S1 common S2 normally closed CCW (left) 5° S3 normally open S4 common S5 normally closed end switches (models with internal switches only)CW (right) 85°S6 normally openOPTIONAL ACCESSORIESAuxiliary Switch KitOrder no.: SW2The auxiliary switches are field-installable parts providing two SPDT freely-adjustable switches.CN20, CN34 SERIES DAMPER ACTUATOR FOR FLOATING AND 2-POS CONTROLManufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies Sàrl, Ecublens, Route du Bois 37, Switzerland by its Authorized Representative:Automation and Control SolutionsHoneywell International Inc. Honeywell (Tianjin) Limited 1985 Douglas Drive North 66, BaiHe Road, TEDA Golden Valley, MN 55422 Tianjin, 300457,P.R.C.EN0B-0320CH33 R0803ADIMENSIONS。
孟山都跨国公司
存在争议---③全球监控
基因警察： 1998年，孟山都公司正式雇佣平克顿（Pinkerton）侦探公司为 自己监控农民。在被Pinkerton公司调查的1800多户农家和与种 子交易者中，有475户因为涉嫌“种子剽窃”而遭到了孟山都公 司的起诉。孟山都知识产权部经理Scott Baucum在一次接受美联 社记者采访时曾这样说道:“他们可以选择同时缴纳两种专利 费—去店铺花费6.5美元专利费，或者是去法院交600美元。” 在印度，Pinkerton印度公司为孟山都提供监督服务。 在西班牙、葡萄牙，有Pinkerton公司的分支。 在加拿大，孟山都雇佣了Robinson侦探公司帮助监视当地的农民。
孟山都下属公司Searle公司高级副总裁
Margaret Miller
Linda J. Fisher Carol Tucker Foreman Marcia Hale George H. Poste Clarence Thomas
孟山都首席科学学(研究rBGH的牛奶科学家)
孟山都政府与公共事务副总裁 孟山都游说骨干(rBGH) 孟山都国际政府事务主管 孟山都公司的动物学专家 孟山都法律顾问部门任职
孟山都主要产品
迪卡品牌-玉米种子
特点：高产，适应性强， 抗病。
迪卡&中种国际种子有限公司
2001年3月，孟山都公司与中国种子集团公司（隶属中 国中化集团公司）合资成立中国第一家经营玉米大田 作物种子的中外合资企业种子公司，即“中种迪卡种 子有限公司”（中方为大股东），注册资本为2,640万 元，总投资额为7,920万元，开始在中国推广迪卡品牌 的杂交玉米种子。由于迪卡系列杂交玉米种子产量高， 稳定性好和品质优良的特点受到了农民朋友的欢迎。 经过多年市场培育，目前“迪卡”品牌的杂交玉米种 子在东北，山东，西北和西南地区均有销售。
公司航班号
南京-釜山vv 南京-首尔vv 武汉-首尔vv 西安-首尔vv 烟台-首尔vv 烟台-首尔vv 青岛-首尔vv 青岛-首尔vv 青岛-首尔vv 青岛-首尔vv 威海-首尔vv 海口-首尔vv 三亚-首尔vv 北京-首尔vv 北京-首尔vv 浦东-首尔vv 浦东-首尔vv 广州-首尔vv 广州-首尔vv 长沙-首尔vv 大连-首尔vv 大连-首尔vv 大连-济州vv 哈尔滨-首尔vv 长春-首尔vv 沈阳-首尔vv 沈阳-首尔vv 沈阳-釜山vv 沈阳-清州vv 沈阳-大邱vv 沈阳-光州vv 沈阳-济州vv 延吉-首尔vv 郑州-首尔vv
MU5045/5046
MU5053/5054 MU5057/5058 MU2071/2072 MU2073/2074 MU2075/2076 MU5035/5036 MU5037/5038 MU2023/2024 MU2015/2016 MU2009/2010 MU2003/2004
733 738 319 733 733 319 319 733 738 319 738 733 733 333 333 346 340 333 333 320 AB6
中国国际 航空股份 有限公司
5J288/289 CA123/124 CA125/126 CA137/138 CA129/130 CA131/132
2007年夏秋季中国内地城市与外国城市之间航线表（2007.3.25-2007.10.27）
机型 班次 参考班期
航线
备注
72Y/AB4 2 3\4 7\1
7 每日
7 每日 7 每日 7 每日 7 每日 7 每日 7 每日 3 .2.4.6. 5 1.345.7 3 ..34..7 7 每日 3 ..34.6.
北京-清州vv 北京-大邱vv 北京-光州vv 北京-济州vv 大连-首尔vv 杭州-釜山vv 杭州-首尔vv 天津-首尔vv 延吉-首尔vv 成都-首尔vv 青岛-首尔vv 青岛-首尔vv 威海-首尔vv 北京-首尔vv 北京-济州vv 浦东-首尔vv 浦东-首尔vv 浦东-首尔vv 浦东-首尔vv 浦东-首尔vv 浦东-釜山vv
Paragon 8 oz 棒梭糖机说明书
OWNER’S MANUALFOR PROFESSIONAL POPCORN MACHINEModel NumbersTHEATER POP 8 CONTEMPO POP 8 PROFESSIONAL SERIES 8 1108110 (120V) 1108220 (120V) 1108710 (120V) 1208110 (230V) 1208220 (230V) 1208710 (230V) 1911 8 OZ POPPER 1911 8 OZ BLACK & CHROME1108910 (120V) 1108820 (120V)1208910 (230V) 1208820 (230V)8 oz Popcorn MachinesParagon International, Inc ∙ 731 W. 18th Street ∙ P.O. Box 560 ∙ Nevada, IA 50201 USASAFETY PRECAUTIONSParagon values your continued safety above all else. Please follow these guidelines when using your equipment to prevent injury and maximize product performance:No direct contact to equipment by the general public should be allowed when used infood service locations. Only trained personnel should operate this equipment.Carefully read any and all instructions before beginning operation of the equipment.Always wear safety glasses when servicing equipment.Kettle reaches extreme heat during operation. To avoid injury, NEVER touch kettlewhile hot.Any alterations made to equipment by anyone other than certified Paragon personnelwill void warranty and may also create unsafe working conditions. NEVER makealterations to the equipment.Machine must be properly grounded to prevent electrical shock.Do NOT immerse kettle, warmer, or any other part of this equipment in water. Doingso may damage equipment and prevent it from working properly.Always unplug equipment before cleaning or servicing to prevent electric shock.INTRODUCTIONP A R A G O N I S P R O U D T O B E Y O U RP A R T N E R F O R M A N U F A C T U R E D F U N.Our goal is to provide you with the best solutions to attract customers, expand your business, and improve your profits. That’s why this product has been specially-crafted to meet precise specifications for performance, efficiency, and output.Your Paragon Popper features:∙ A high-output, hard-coat anodized aluminum kettle for powerful performance and easy cleaning.∙Convenient side-hinged kettle that makes it a snap to operate and to clean.∙Sturdy cabinet construction that withstands heavy commercial use and maintains attractive appearance.∙Stainless steel food zone and tempered glass panels for sanitary food environment and easy cleaning.∙Built-in warming deck with 50-watt elements keeps which popcorn hot and fresh thanks to even heating throughout the batch.∙Old maid drawer to catch unpopped kernels that effortlessly sift through for later disposal.∙Presentation lamp which creates an attractive display setting for increased impulse buying.Should you have any questions about your equipment, or would like to know more about our other innovative concession equipment and supplies, please contact us at 1-800-433-0333 or visit us on theweb at: Thank you for your purchase and enjoy!ELECTRICAL REQUIREMENTSThis product requires a properly-grounded 120 volt supply with a 15 amp circuit. The Paragon 8 oz Popper has a current draw of 12 amps. (Export voltage is 230VAC.)We recommend your Paragon Popcorn Machine be plugged directly into a dedicated outlet. Extension cords may create a safety hazard and reduce its performance.Be sure outlet accepts three (3) prong grounded plug. DO NOT use a three (3) prong to two (2) prong adapter.UNPACKINGParagon carefully inspects each product during assembly and after completion to adhere to strict quality guidelines, and packs it securely to ensure safe delivery to each of our customers. Be sure to carefully remove all packing material and adhesive before any operation. Please examine your product to guarantee all equipment has arrived, complete and in good condition.If you believe that any damage may have occurred during shipment or parts may be missing, please contact Paragon immediately for replacement.FREQUENTLY ASKED QUESTIONSHow much will my popcorn popper produce?The Paragon 8 Oz. Poppers will yield 147 ounces of popcorn per hour.Why are hard-coat anodized aluminum kettles considered the best?When you are cooking popcorn there are two key elements: heat transfer and ease ofcleaning. Aluminum provides the best heat transfer of any approved cooking material which means that the heat from the elements transfer completely to the food, resulting in muchbetter performance. When you anodize aluminum you are changing the molecular surface of the aluminum and filling in the pores of the material. This makes a very smooth and slippery surface which can be cleaned very easily and is extremely durable.What makes popcorn pop?A popcorn kernel actually has approximately 12% moisture inside of it. As you heat up thekernel, the moisture turns into steam and expands. Once the kernel reaches 475 degreesFahrenheit the expanding steam forces the hull to explode (or pop).How long does it take to cook a batch of popcorn?All Paragon poppers are designed to cook a kettle of kernels in approximately 3-1/2 minutes.The cycle time is based on having the kettle heated to cooking temperature before loadingthe kettle.What type of oil should I use to cook popcorn?The type of oil that you use will affect the taste of the popcorn. The most common type that is used is coconut oil. It normally is regarded as the best tasting and has long been a staple at movie theaters. However, many health conscious people prefer canola oil due to its lower fat and cholesterol content. Other types that are often used are sunflower, peanut and soy. What’s the bes t way to keep my popcorn machine clean?All Paragon poppers utilize tempered glass panels, stainless steel cleanout trays, aluminum corner posts and anodized kettles. These surfaces can be cleaned using vinegar and water solution. The use of ammonia based cleaners is not recommended. You will want to notethat you should never submerge a kettle in any type of liquid because it has electricalcomponents inside of it that can short out. Paragon kettles are designed to be wiped out witha clean cloth after each use. Should you have a kettle that gets burned-on oil stains you canorder Paragon’s kettle cleaning kit (part #1075) which will allow you to clean it to near newconditions.What is “expansion ratio” on popcorn and what is the optimum level?Expansion ratio refers to the increase in volume that occurs as popcorn pops. It isdetermined by measuring the volume of popcorn prior to and after popping. An expansionratio between 40 and 44 is usually considered ideal. If the expansion is less than 40, thepopped corn can be a little chewy and if the expansion ratio is over 44 the popcorn becomes very brittle and tends to break apart into small pieces.OPERATING INSTRUCTIONSBe sure equipment is connected to properly grounded 120 volt power supply with 15 amp circuit. (230 volts for export models)Popping1. Turn on two switches.FOR 1911 ORIGINAL AND 1911 BLACK & CHROME POPPER: LIGHT (inside cabinet, top left) and KETTLE/MOTOR (next to light switch).FOR THEATER, CONTEMPO, AND PROFESSIONAL SERIES: POWER and KETTLE (located in chassis).2. Allow kettle to warm for approximately 5 minutes.3. BULK SUPPLIES: Place one measure of oil in kettle (1/3 cup). Immediately add one measure of rawpopcorn (8 oz.) plus seasoning salt. Pull lid closed to prevent stray kernels. (Lid is held in place bymagnet directly above the kettle.)PORTION PACKS: Cut off top of plastic pack. Dump entire contents in kettle. Pull lid closed toprevent stray kernels.4. While corn is popping, keep front operator doors slightly ajar to prevent fogging. Keep hopper door at“out” position to aid in catching stray popcorn.5. Allow corn to pop until popping ceases, usually when 3-4 seconds lapse between pops. Then pourremaining popped corn from kettle by rotating handle clockwise 1/3 turn and pulling downward.6. Repeat steps 1-5 for additional batches.7. Turn KETTLE switch to OFF position when finished preparing popcorn; POWER or LIGHT switch mayremain ON to display and heat popcorn.KETTLE WILL BE HOT!Please be sure to avoid direct contact with the kettle during the popping process!Kettle CareThe Paragon exclusive popcorn kettle consists of a double (two part) unit for maximum efficiency at minimum expense with low-cost maintenance.NOTE: To avoid heavy build-up of deposits that require specialized cleaning, please follow these instructions:1. Wipe, with soft towel or cloth, excess oil from exterior and interior of kettle as often as possible.2. Excessive or careless use of popping oil may result in kettle damage.3. Always be sure to turn KETTLE switch to OFF when popping is complete.4. For heavily carbonized kettles, Paragon recommends the use of Kettle Cleaning Kit (part #1075).NEVER USE WATER ON ANY PART OF THE KETTLE!Kettle Removal1. Make sure unit is NOT connected to a power supply. UNPLUG power cord.2. Unplug the kettle pigtail from the socket located in the chassis of the machine (ceiling).3. Pull the clip off the hinge pin.4. Pull the hinge pin out of the kettle hanger to free kettle.5. TO INSTALL: Reverse steps 1-4.。
惠美尼鱼鹰湖大师地图卡快速入门指南说明书
introductionHumminbird® LakeM aster® VX map cards are compatible with HELIX ® G3/G3N and G4/G4N control heads with chartplotting capabilities and all APEX™ and SOLIX ® control heads. To review the latest compatibility information and to download a detailed LakeMaster Map Card user guide, visit our Web site at .This quick start guide and the LakeMaster user guide contain instructions that apply to your Humminbird control head(s) as follows:• APEX Series• SOLIX Series• HELIX SeriesHumminbird LakeMaster Map CardsYour control head is compatible with either an SD card or a microSD card. It is important to note the following guidelines:WARNING! Do NOT delete or change the contents of your map card. Changing the card will permanently damage it.• C onfirm the map card is locked (see the illustrations below).• D o not force the card into the slot. The card should click easily into place. • D o not leave the card slot cover open. Close the slot cover to preventwater damage to the unit.microSD card lakemaster ®quick start guide 532794-1EN_Bgetting startedPower On1. Press the POWER key.2. C hoose your startup mode. If you are on the water with GPSreception, select Normal mode. If you are off the water without GPS reception, select Simulator mode.Check the Current Software VersionIt is important to install the latest software update to enable the Humminbird LakeMaster map card on your control head.LakeMaster requires the following software versions:APEX and SOLIX:4.040 and laterHELIX:2.720 and laterT o download the latest software, go to our Web site at and slick Support > Software updates. For complete details about the software update process, see your control head manual.Update the Basemap (HELIX Only)LakeM aster requires the following basemap versions to operate on HELIX control heads:HELIX 5, 7 and 8:2.010 (released 07/2020) and laterAll other compatible HELIX models:1.031 (released 07/2020) and later T o download the latest software, go to our Web site at and slick Support > Software updates. For complete details about the software update process, see your control head manual.Open Chart ViewAPEX/SOLIX:1. Press the HOME key.2. Select Chart View from the Favorites bar.HELIX:1. P ress the VIEW key until Chart View is displayed on-screen.ORPress and hold the VIEW key to open the Views X-Press Menu. Select Chart > Chart View.chart view (helix)Using the Status Bar (APEX and SOLIX Only)The status bar is located at the top of the screen. It changes to match the on-screen view and active map card. You can tap the icons in the status bar to open and close a menu or make a selection.Tap to open theX-Press Menu chart orientation chart preset depth color paletteSelect Chart PresetUse Chart Presets to quickly alternate between settings. You can use the default Fishing or Navigation settings provided, or you can create a custom User preset with your preferences. The Fishing and Navigation presets are also fully customizable. You can restore each preset back to its default settings at any time.APEX/SOLIX: Chart X-Press Menu > Chart Options > Chart Preset HELIX: Main Menu > HB Chart tab > Chart PresetAPEX/SOLIX HELIXSet the Water Level OffsetIt is important to note if the water level is higher or lower than normal for the selected lake. For example, if the water level is down 3 feet, set the Water Level Offset to -3. Depth labels on the Contour Lines will adjust based on the Water Level Offset setting.•I f the water level is higher than normal, set a positive amount.•I f the water level is lower than normal, set a negative amount.•I f the water level has not changed (normal): For APEX and SOLIX, turn Water Level Offset off. For HELIX, set the Water Level Offset to 0.APEX/SOLIX: Home > Settings > Chart > Water Level OffsetHELIX: Main Menu > HB Chart tab > Water Level Offsetshoreline new shoreline with Water Level Offset set to -3water level offset (off)water level offset (on)Set Safe Depth LevelUse the Safe Depth feature to set the minimum depth level for your vessel and to turn on highlights for hazards shallower than that level. APEX/SOLIX:Home > Settings > Chart > Safe DepthHELIX:Main Menu > HB Chart tab > Safe DepthSet Depth HighlightsHighlight deep and shallow waters in Chart View and Chart Combo Views using the following LakeMaster features. Highlight colors are customizable. •D epth Highlights allow you to select up to four depth ranges to be highlighted on the chart.•S hallow Water Highlight identifies shallow waters when the depth is equal to or less than the level you set.APEX/SOLIX: Chart X-Press Menu > Chart Options > Depth Highlights HELIX: Main Menu > HB Chart tab > Depth Highlightsdepth highlights (off)depth highlights (on)S martStrike®: Access the SmartStrike MenuUse SmartStrike to highlight areas of the map where fish are most likely biting (available for HD lakes only).APEX/SOLIX:Chart X-Press Menu > SmartStrikeHELIX:Press the MENU key once > SmartStrike.lakemaster in chart view APEX/SOLIXland contourlinesshallow waterhighlight depth label(depth ofcontour)depth palette colors depth highlight 1 HELIXdepthhighlight 1shallowwaterhighlightcontour lines depth label(depth ofcontour)depth palette colorslandtips for using the mapMove Across the Chart HELIXMove the Joystick. Press any arrow on the 4-Way Cursor Control key. See More on the ChartZ oom in (+) and Zoom out (-) to see more of the chartdisplay (contour lines, depth colors, etc.).View Map InformationM ove the cursor to an icon (buoy, marker, etc.), contour line, orposition on the chart, and press the CHECK/INFO key. If you have an APEX or SOLIX control head, press the CHECK/INFO key a second time or select Map Info from the Info Menu.Search Your Map (APEX And SOLIX Only)Search the area for the nearest waypoints, routes, and tracks.1. From the Chart X-Press Menu, select Info.2. Select Find Nearest.3. Select an item from the displayed list.Display or Hide Contour LinesHide Contour Lines to see more details on the chart.APEX/SOLIX: Chart X-Press Menu > Chart Options > Depth/Contours HELIX: Main Menu > HB Chart tab > Depth/ContoursChange the Chart OrientationSelect your display preference: North-Up, Head-Up, Course-Up, etc.APEX/SOLIX: Chart X-Press Menu > Chart Options > General > Orientation HELIX: Main Menu > Chart tab > Chart Orientationadvanced lakemaster features LakeMaster Premium: Change LayersIf you have a LakeMaster Premium map card, you can display layers that show aerial imagery or shaded relief in Chart View and Chart Combo Views.The transparency of these layers is customizeable.•A erial Imagery can be applied to land only or to both land and water. •S had ed Relief uses shadows to show features of the lakebed. APEX/SOLIX: Chart X-Press Menu > Chart Options > LayersHELIX: Main Menu > HB Chart tab > Layersaerial imagery (land and water)shaded reliefAutoChart® ZeroLinesDownload the AutoChart ZeroLines Accessory Manual from our Web site at .troubleshootingThe map is not displayed in Chart View.1. C onfirm GPS reception.2. Confirm the control head software is up to date.3. Confirm compatibility on our Web site at .How can I view maps on my control head when I am not on the water?1. Power on the control head. Select Start Simulation (APEX/SOLIX) orSimulator (HELIX). Open a chart view and move the cursor to your desired position on the chart.APEX/SOLIX:Chart X-Press Menu > Set Simulation PositionHELIX:Main Menu > Chart Menu Tab > Set Simulation PositionC an I view the Humminbird LakeMaster map card on my computer?No, the Humminbird LakeMaster map card is not compatible with your computer. It is only compatible with your Humminbird control head.Installing the Humminbird LakeM aster map card in a computer could corrupt the map files.T he map displays, but seems to redraw slowly as you move across the water.1. Press the ZOOM (-) key to zoom out of the Chart View.2. Confirm the control head software is up to date.F or ad d itional questions, see the FAQ page at orcontact Humminbird Technical Support through our Help Center at https://humminbird-help.johnsonoutd /hc/en-us.warrantyProduct Warranty & Return PolicyJohnson Outd oors warrants this prod uct against d efects in material and workmanship for 1 year from the d ate of purchase. Defects in materials or workmanship that occur within 1 year of purchase, substantiated by a sales receipt, will either be repaired or replaced without charge at Johnson Outdoors’ d iscretion. THIS REPAIR OR REPLACEMENT IS THE EXCLUSIVE REMEDY AVAILABLE FOR ANY DEFECT CONCERNING THE PRODUCT OR FOR ANY LOSS OR DAMAGE RESULTING FROM ANY OTHER CAUSE WHATSOEVER. JOHNSON OUTDOORS WILL NOT UNDER ANY CIRCUMSTANCES BE LIABLE TO ANYONE FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL OR OTHER INDIRECT DAMAGES OF ANY KIND.This warranty does not apply when: 1. the product has been altered, adjusted or handled in a manner other than in accordance with the instructions furnished with this product: 2. any defect, problem, loss or physical damage has resulted from any misuse, negligence or carelessness.Return of Defective ProductDo not return this product to any retailer. You must return this product directly to Johnson Outd oors. Returned prod ucts must have a Return Authorization (RA) number clearly displayed on the outside of the shipping package. Contact Humminbird Technical Support through our Help Center at https:///hc/en-us within 1 year of purchase to obtain the RA. When you return the product, include a valid sales receipt, product UPC, a return address and phone or email contact information. The RA is valid for 30 d ays from d ate issued. Prod uct should be returned to: Humminbird Service Department, 678 Humminbird Lane, Eufaula, AL 36027 USAJohnson Outdoors reserves the right to examine the product when we receive it to determine if the defect or malfunction is due to a defect in materials or workmanship. Johnson Outdoors will duplicate the original data on all repaired or replaced products. Products that are defective due to any other cause will not be repaired or replaced. Damaged products, not covered by or that are out of warranty may be eligible for repair for a service fee, contact Johnson Outdoors for more information. WARNING: Never format a Humminbird SD card. Formatting the card will permanently erase the map d ata. Never use a Humminbird SD card to store or transfer data as this may damage the card.warningsWARNING! The electronic chart in your Humminbird unit is an aid tonavigation d esigned to facilitate the use of authorized government charts, not to replace them. Only official government charts andnotices to mariners contain all of the current information needed forthe safety of navigation, and the captain is responsible for their prudent use.WARNING! Do NOT save data files (waypoints, routes, tracks, groups,recordings, etc.) to your map card. Saving data to your map card willpermanently d amage it. You can save navigation d ata to the controlhead and export it to a blank card. Download the LakeMaster Map CardsUser Guide from our Web site at for more details.WARNING! Do NOT d elete or change the contents of your map card.Changing the card will permanently damage it.NOTE: To purchase accessories for your control head, visit our Web site at or contact Humminbird Technical Support through ourHelp Center at https:///hc/en-us. APEX™, AutoChart®, LakeMaster®, HELIX®, Humminbird®, SmartStrike®, and SOLIX® aretrademarked by or registered trademarks of Johnson Outdoors Marine Electronics, Inc. Adobe, Acrobat, Adobe PDF, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.microSD is a trademark or registered trademark of SD-3C, LLC in the United States, other countries or both.© 2023 Johnson Outdoors Marine Electronics, Inc. All rights reserved.contact humminbirdContact Humminbird Technical Support through our Help Center at https://humminbird-help.johnsonoutd /hc/en-us or by writing to the address below:Humminbird Service Department678 Humminbird LaneEufaula AL 36027 USASocial Media Resources:/HumminbirdElectronics (@humminbirdfish)/humminbirdfishing/humminbirdtv。
SINOVA 3MH7、3MT7、3MU7 和 3MV8 保护设备说明说明书
Reliable Control & ProtectionSINOVA3MH7, 3MT7, 3MU7 & 3MV8Contactors, Overload Relays & Motor Starter ProtectorsOverviewSINOVA 3MH7 Contactor Relays, 3MT7 Power Contactors, 3MU7 Thermal Overload Relays and 3MV8 Motor Starter Protectors are a cost-efficient and reliable solution for a variety of control, switching and motor protection applications. The comprehensive range is designed for all standard industrial and infrastructure applications.The range comes with homogeneous design aesthetics and common accessories across the product range for 3MH7 Contactor Relays and for 3MT7 Power Contactors up to 400A .IndexKey Features4 SINOVA 3MH7 Contactor Relays5 SINOVA 3MT7 3-Pole Power Contactors13 Accessories32 SINOVA 3MU7 Thermal Overload Relays41 SINOVA 3MV8 Motor Starter Protectors57 Type-2 Co-ordination Charts68Key Features4FlexibleDesigned to allow foradaptation in manytypes of panel designsfor your control andprotection needs.ReliableAssuring motorprotection with testedtype-2 coordinatedfeeder solutions.HomogenousDesignHomogenous designaesthetics andcommon accessoriesacross the definedproduct ranges.SafeConfirming to- IEC 60947-4-1- IEC 60947-5-1• RoHS compliant• CE Certified• Type testing underCB schemeArticle Number SchemeSINOVA Contactor Relays Number of NO contacts e.g. 2 = 2 NO e.g. 2 = 2 NC 1= Screw terminals A= AC coil circuit e.g. P0 = 230V AC, 50 HzNumber of NC contacts Type of electrical connection Coil circuitRated control supply voltage 3MH721Product VersionArticle numberAP 00☐-☐☐☐☐SINOVA Contactor Relays3MH702210,000,00045 x 74.4 x 81.8mmType 3MH70313MH7040SizeDimension (W x H x D)Mechanical service life Permissible ambient temperature During operation °C -5 … +55During storage °C -25 … +70Relative air humidity%10 … 95Degree of protection IP on the front IP20 - With fuse links of operational class gG:A10Installation altitude at height above sea level, maximum m 2000• Basic unit• Basic unit 22.5° Inclination forward and Backward & 360° Rotation, in relation to normal vertical mounting plane Operating cycles 10,000,000• Basic unit with mounted auxiliary switch Operating cycles 6Rated impulse withstand voltage U imp kV1000Rated insulation voltage U i (pollution degree 3)V Mounting positionGeneral dataShort-circuit protection73MH70223MH70313MH70401 x (1.0 ... 4.0 mm²);2 x (1.0 ... 4.0 mm²)3MH70223MH70313MH70402342103MH7031-1A..03MH7022 (2NO+2NC)Article Number Scheme SINOVA 3 Pole Power ContactorAC-3 current ratingat 415Ve.g. 012 = 12 Ae.g. 0 = Size 0A= Screw terminals 0Product Version Article number3MT7☐3MT7006-03MT7018-13MT7025-23MT7040-33MT7080-42345674.584.5127.4181920Technical Specifications21Size 1Size 2Size 3Size 4Note: .. pls enter coil voltage from "coil code" table on page no. 24Note: .. Please enter coil codes from table in next page233MT79000L..1.. Please enter coil codes from table below24V36V48VB0G0#H050/60Hz C2G2#H2#Note : *T0 and S0 wide band coils are available upto Size 2 contactors not available for Size 5,6,7 & 8 contactorsavailable only for Size 5,6,7 & 8 contactorsSize 1Size 3Size 4Spare Contact Kit For ContactorsSize 0, Size 1, Size 2 (1 NO Version)Dimension DrawingSize 6Size 7170 / 205A250 / 300ASize 8400A48.0115.0185.0154.0174.0Ø7160.0110.042.0135.0Ø9180.0A1A242.042.020.0198.0132.058.0193.0168.0205.048.048.0150.048.0120.0180.0A2A1Ø1125.0Ø9.0160.025.048.048.048.0A2A1204.0178.0204.0222.066.0Ø9.0180.0130.0150.0Ø11.0Accessories33Selection and Ordering35Wiring Diagram37Dimension DrawingAccessories for ContactorsAuxiliary switchesCompatible with 3MT7 three pole power contactor and 3MH7 contactor relayProduct PictureMounting Position Compatible contactorMaximum mountable auxiliary switchesArticle numberNumber of auxiliary contacts NO NC Surge SuppressorCompatible with 3MT7 three pole power contactor Size 0,1,2,3,4 and 3MH7 contactor relayProduct PictureMounting PositionArticle number Voltage 1-21-213MH7920-0CL103MH7911-0CL10-1113MH7910-0CT103MH7901-0CT103MH7920-0CT103MH7911-0CT103MH7902-0CT103MH7940-0CT103MH7931-0CT103MH7922-0CT103MH7913-0CT103MH7904-0CT10-1-124321-24-48V AC 50/60Hz 110-240V AC 50/60Hz 380-440V AC 50/60Hz3MT7900-1SC213MT7900-1SL213MT7900-1SV21-1234FrontSize 0,1,2,3,4and Contactorrelay1222Size 5,6,7,8First left or first rightFirst left or first right Second left or second rightClip on between A1-A2coil terminals 3MH79110CL213MH79110CL22Accessories for ContactorsPneumatic TimerCompatible with 3MT7 three pole power contactor Size 0,1,2,3,4Product PictureFunction Mounting PositionArticle numberNumber of auxiliary contacts Timing Seconds NONCInterlockFor 3MT7 three pole power contactors11Top3MT7900-0PN103MT7900-0PN203MT7900-0PN300.1-30.1-3010-180On DelayOff Delay0.1-30.1-3010-1803MT7900-0PF103MT7900-0PF203MT7900-0PF303MT7900-1XM013MT7900-1XM023MT7900-1XM033MT7900-1XE013MT7900-1XE023MT7900-1XE03S u i t a b l e f o r C o n t a c t o r S i z e 0, 1,2S u i t a b l e f o r C o n t a c t o r S i z e 3S u i t a b l e f o r C o n t a c t o r S i z e 4M e c h a n i c a l I n t e r l o c kE l e c t r o - M e c h a n i c a l I n t e r l o c kWiring Diagram1 &2 Pole Front Auxiliary switches4 Pole Front Auxiliary switchesSingle Pole 1NO Four Pole 4NO Four Pole 3NO+1NC Four Pole 2NO+2NC Four Pole 1NO+3NCFour Pole 4NCSingle Pole 1NC Two Pole 2NO Two Pole 2NC Two Pole 1NO + 1NCLateral Auxiliary SwitchTwo pole 1NO + 1NCTwo pole 2NO6162515261625354535461625354636461627172818251526364737483845354616271728182535461627172838453546162737483845354162/171153/184154/183161/172-K 153/184154/183163/174164/173-KWiring Diagram Pneumatic TimerElectro-Mechanical InterlockOFF Delay timer65665758ON Delay timer 6 7 6 85 5 5 6Dimension Drawing 1 & 2 Pole Front Auxiliary switches4 Pole Front Auxiliary switchesFront View Two Pole 2NOFront View Single Pole 1NOFront ViewTwo Pole 2NCFront ViewTwo Pole 1NO + 1NCFront View 4NO Front View3NO+1NCFront View2NO+2NCFront View 1NO+3NC Front View4NCSide viewFour PoleFront ViewSingle Pole 1NCSide viewLateral Auxiliary switchesPneumatic TimerFront View Two Pole 1NO+1NC Front View Two Pole 2NO Side view Two PoleON DelayOFF DelaySurge SuppressorMechanical / Electro-mechanical Interlock with Contactor3MT79001XM01 / 3MT79001XE01with Size 0 Contactors3MT79001XM01 / 3MT79001XE01with Size 1 ContactorsMechanical / Electro-mechanical Interlock with Contactor3MT79001XM01 / 3MT79001XE01with Size 2 Contactors3MT79001XM02 / 3MT79001XE02with Size 3 Contactors3MT79001XM03 / 3MT79001XE03with Size 4 ContactorsSINOVA 3MU7 Thermal Overload Relays are designed for consistent motor protection in all standard applications. Coupled with the SINOVA 3MT7 3-Pole Power Contactors, they provide optimum control and protection for your motor feeders.Article Number SchemeNote:The above scheme shows an overview of the product versions for understanding of the logic behind the article number For your orders refer to selection and ordering dataSINOVA Thermal Overload Relays & the matchingSINOVA 3-Pole Power ContactorsSize 2Size 0Size 1Size 23MU723MU71ProtectionConnection for mounting onto contactors 1Relay Status2Selector switch for Auto /Manual reset and reset button 3Stop button4Auxiliary circuit terminals 5Test function6Motor current setting dial 7Provision for fixing sealing cover8• Tripping due to overload• Tripping due to single phase failureApplicationManual and Remote resetClass 10Dimension (W x H x D)Trip Class acc. to IEC 60947-4-1 Permissible ambient temperature During operation °C -5 … +55During storage °C -25 … +70Degree of protection IP on the front IP20Relative air humidity%10 … 95mInstallation altitude at height above sea level, maximum 2000Mounting positionType of MountingReset 44 x 63.6 x 91.854 x 76.1 x 92.470 x 79.2 x 115mm • Basic unitOverload, Single Phase Failure Minimum recovery time depends on the strength of the tripping current and characteristic 22.5° Inclination forward and Backward& ± 90° Rotation, in relation to normal vertical mounting planeDirect mounting on contactorOr Stand-alone installation by screw fixing Or Snap-on mounting on standard mounting rail.Recovery64Rated impulse withstand voltage U imp Main circuit Aux circuit690Rated insulation voltage U i (pollution degree 3)VkV kV Tripping in the event ofShort-circuit protection of auxiliary circuitManual and Remote resetClass 10ADimension (W x H x D)Trip Class acc. to IEC 60947-4-1 Permissible ambient temperature During operation °C -5 … +55During storage °C -25 … +70Degree of protection IP on the front IP00Relative air humidity%10 … 95m Installation altitude at height above sea level, maximum 2000Mounting positionType of MountingReset 147 x 157 x 173mm• Basic unitOverload, Single Phase Failure Minimum recovery time dependson the strength of the tripping current and characteristic22.5° Inclination forward and Backward& ± 90° Rotation, in relation to normal vertical mounting plane. Stand-alone installation by screw fixingRecovery86Rated impulse withstand voltage U imp Main circuitAux circuit1000Rated insulation voltage U i (pollution degree 3)VkVkV Tripping in the event of。
Carter Ground Fueling Model 64031 3英寸双性接口应用说明说明书
Model 640313" Unisex CouplingA pplicable additional manuals :NONESM 64031May 2007Maintenance & Repair ManualAerospace GroupConveyance Systems DivisionCarter ® Brand Ground Fueling EquipmentTABLE OF CONTENTSPAGE (3)1.0 INTRODUCTIONDESCRIPTION (3)2.0 EQUIPMENT3.0 TABLE OF OPTIONS AND ORDERING INFORMATION (3)4.0 DISASSEMBLY (3)5.0 INSPECTION (4)6.0 REASSEMBLY (4)7.0 TEST (5)8.0 ILLUSTRATED PARTS CATALOG (6)MAINTENANCE, OVERHAUL & TEST INSTRUCTIONSCARTER PART NUMBER 64031 UNISEX COUPLING 1.0 INTRODUCTIONThis manual furnishes detailed instructions covering the maintenance and overhaul of Carter Ground Fueling Model Number 64031, 3" Unisex Couplings and the various options listed in Section 3.0.2.0 EQUIPMENT DESCRIPTIONCarter Model 64031 Valved Unisex Coupling is a 3 inch hose coupling that is universally connectable to other 64031 Valved Unisex Couplings. The units are qualified in accordance with A-A 59377, Class A which supercedes MIL-C-53071. Section 3.0 details the various options available. Other configurations of Carter units that are available and to which the 64031 will mate are listed in Section 3.0. The basic valved coupling would be procured under the part number 64031 with various options that determine the desired inlet or hose mounting configuration. The exploded views in the figures at the end of the manual include the various options available. Item numbers referenced in Sections 4 through 7 refer to the parts list in Table 1.3.0 TABLE OF OPTIONS AND ORDERING INFORMATIONThe 64031 is available with various inlet or hose mounting configurations as described in the tables below. The units are available in two colors to meet the customers requirements, tan (standard) and green (option V).DESCRIPTION OPTION LETTER DESCRIPTION OPTION LETTERC Adds 100 Mesh Screen N Adds 1-1/2" Male NPT inletD Adds 3" Hose Barb Inlet P Adds 4" Male Camlock InletE Adds 4" Hose Barb Inlet Q Adds Dust Cap/Plugs, Camlock TypeF Adds 2" Male Camlock Inlet R Adds 3" Female NPT InletG Adds 2" Female Camlock Inlet S Adds 3" Male NPT InletH Adds D-1/D-2 Inlet Flange T Adds 3" MS33786-48 Flanged InletJ Adds 2" Male NPT Inlet U Adds 3" Vitaulic Grooved End Inlet K Adds 3" Female Camlock Inlet V Changes exterior color to greenL Adds 2” Hose Barb Inlet W Adds 4" Male BSPP InletM Adds 4" Female Camlock Inlet Z CRES Interface Locking Lugs Note: One of the above options letters must be included with the basic part number 64031 to receivea completed unit.Example: 64031D - 3" Unisex Coupling with 3" Hose Barb Inlet Fitting.64031KQ – 3” Unisex Coupling with 3” Female Camlock Inlet and Dust Plug.4.0 DISASSEMBLY4.1 Remove Screw (1) using a torque wrench,checking the running torque. If the runningtorque is less than 9.5 in lbs (0.11 m kg),discard the Screw (1). Note: Screw (1) isself-locking and is designed to be reused upto 15 times before replacement is necessary. If a torque wrench is not used to remove it, Screw (1) should be replaced. Remove and discard Packing (2). Holding the unit over a suitable container to collect the Balls (3) in the swivel joint, with the screw hole toward the container, rotate theinlet fitting to allow the Balls (3) to fall intothe container. There should be 41 Balls (3).When all 41 Balls (3) have been collected,remove the inlet adapter (ref. Figure 2 forvarious inlet types). Note there is a smallspring loaded Ball (4) and Spring (5) thatare used to maintain electrical continuity.This ball and spring are located on theadapter. As the adapter is removed the ballwill become exposed and be pushed out bythe spring and may be lost in the removalprocess. Remove and discard Packing (6). 4.2 Rotate handle 8 to the open position.Remove Screws (7) and Handle Assembly(8). It is not necessary to disassembleHandle Assembly (8) unless it is damagedand in need of repair. Set the HandleAssembly (8) aside for later use.If necessary to disassemble HandleAssembly (8), use an Allen Key to removeScrew (9) and Spring (10).4.3 Using an Allen Key, remove Screw (13),turn unit over and remove the secondScrew (13) from the opposite end. Usingone of the Screws (7) in the Shaft (14) as aremoval tool, remove Shaft (14). Removeand discard Packings (15) and (16) andBushing (17). Remove and discard Bushing(18).4.4 Reaching in the inlet end, remove Ball (19)from the unit. Push out the Lower Shaft(20). Remove and discard Packings (15)and (16) and Bushing (17).Remove Seal Wire (22) from inside ofHousing (21). Remove Seal Retainer (23)and Seal (24). Discard Seal (24).4.5 Remove the Bumper (25) only ifreplacement is needed or if it is necessaryto replace Lugs (26) or (27). If necessary,remove Screws (28) from Lugs (26) or(27).4.7 Do not remove Spring Pin (29) that retainsthe Lockout Pin (30) unless it is necessaryto replace any of these parts. If necessary,using a drift pin, press out Spring Pin (29)and discard it. This will allow the removalof Lockout Pin (30) and Spring (31).4.8 Remove Seal (32) from unit and discard.4.9 Do not try to disassemble the Housing (21)to remove the spring loaded Ball (33) orRetainer (34) permanently affixed in theface of the unit. If the ball is damaged,replacement of the Housing (21) will benecessary.4.10 Peel out and discart Seal (32) from theDust Cap (36). Note: do not remove centerplug from dust cap. It is a pressed fit andnever needs replacing. If the obsoletemetal Dust Cap Assy (36A) is present andneeds replairing, it is recommended that itbe replaced with the newer plastic cap(36).5.0 INSPECTIONIt is recommended that all Packings (2), (6), (15) & (16), Seals (24) and (32) and Bushings (17) and (18) be discarded and replaced at each overhaul.Inspect all metal parts for dings, gouges, abrasions, etc. On all parts except for the Ball (19), use 320 grit paper to smooth and remove sharp edges. Replace any part with damage exceeding 15% of local wall thickness. Use alodine 1200 to touch up bared aluminum. If Ball (19) is scratched or damaged it should be replaced.Inspect the Bumper (25) for evidence of cracking or wear. Replace as necessary. Check Lugs (26) and (27) to assure that they are not loose. If loose, remove Bumper (25) to check the tightness of the Screws (28). Screws should be tightened to 6 in-lb. Count the Balls (3) to make sure that all 41 are present.Check the ball groove (round bottom) of the inlet swivel. If groove is worn such that burrs exist, use 320 grit paper to smooth and remove sharp edges. Burrs will make it difficult to re-install the part.Inspect the small spring loaded ball located in the face of the unit. Push the ball in and be sure that it pops back into place. The purpose of this ball is to provide electrical continuity between mating units.Inspect Screw (9) and Handle (11) for damage that could have been caused by dropping the unit. If either part is bent replace it.Inspect Dust Cap Assy (36) to make sure that the center portion that is pressed in place remains in place. If it is missing, theSeal (32) will also be missing, in whichevent it will be necessary to replace theCap Assy..6.0 REASSEMBLYReassemble the parts in the reverseorder of disassembly noting thefollowing:6.1 Make certain all components are cleanand free from oil, grease, or any othercorrosion resistant compound on all interior or exterior surfaces. Wash allparts with cleaning solvent, Federal Specification P-D-680 or equivalent, anddry thoroughly with a clean, lint-free clothor compressed air.WARNING!Use cleaning solvent in a well-ventilated area. Avoid breathing of fumes and excessive solvent contact with skin. Keep away from open flame.NOTE: A light coat of petrolatum, FederalSpecification VV-P-236 or equivalent commercial quality, can be applied to all o-rings and seals for ease of installation. A thin coating should also be applied to the Ball(19).6.2 When installing Seal (32) into DustCap (36) use a finger to be sure thatthe seal is properly seated in itsgroove. The same procedure shouldbe used when installing the same Seal(32) into the groove in the Housing(21). These seals are identical andcan be interchanged.6.3 If the Lockout Pin (30) and Spring (31)were removed, it will be necessary toreinstall them using a drift pin to installSpring Pin (29) into Housing (21).Note that the rounded portion of theLockout Pin (30) is positioned towardthe outer diameter of the Housing (21).6.4 If the Lugs (26) and (27) were removed, installthem in their proper positions. Align the holesin the Lugs (26) or (27) with the hole pattern inthe Housing (21). Tighten Screws (28) to 15in-lb.6.5 Re-install Bumper (25) onto Housing (21) suchthat the thin lip seal end is facing away fromthe unit.6.6 Place Seal (24) into Housing (21) with the flatsurface inserted into the Housing (21). InsertSeal Retainer (23) and reinstall Seal Wire (22)into the groove to retain.6.7 Insert Ball (19) into Housing (21). PlaceBushings (17) onto Lower Shaft (20) along withPacking (15). Place Packing (16) into groovein Lower Shaft (20) and insert into Housing (21)and Ball (19) aligning the flats of the two parts,retaining with Screw (13).6.8 Install Bushing (18) into the groove in theHousing (21). Place Bushing (17) onto UpperShaft (14) along with Packing (15). PlacePacking (16) into groove in Upper Shaft andinsert into Housing (21) and Ball (19) aligningthe flats of the two parts. Retain with Screw(13).6.9 If Handle Assembly (8) was disassembledearlier, reinstall Spring (10) and Screw (9) intoHandle (11) and bottom out into Knob (12).Handle Assembly (8) can then be assembledusing the two Screws (7).6.10 Place Packing (6) onto Inlet [ref. Fig. 2, items(1) thru (20)] and start the Inlet into the openingin the Housing (21). Install Spring (5) and Ball(4) into hole in Inlet, and holding it in thecompressed position, finish installing the Inletinto Housing (21). Insert the 41 Balls (3) intothe hole in the Housing (21) by rotating the Inletwhile installing the Balls (3). Once all 41 Balls(3) are installed, place Packing (2) onto Screw(1) and install the assembly into the threadedholes to retain the joint. Torque to 76 ± 4 in-lb.7.0 TEST7.1 The following test procedures will beaccomplished after overhaul:7.2 Test conditionsTest media shall be JP-8 MIL-T-83133, JetA, odorless kerosene or Stoddard typesolvent MIL-PRF-7024E Type II.7.3 Functional Test7.3.1 Using the test unit and a similar valvedunisex coupling, make sure that they willconnect correctly while both couplings arein closed condition. After connecting thecouplings, open the test unit and try todisconnect by applying a counterclockwisemotion. The coupling, in open position, willprevent any disconnect attempt. Thenclose the test unit and disconnect byapplying a counter-clockwise motion.7.3.2 Connect the test unit to another unisexcoupling with inlet capped. Connect fluidpressure source capable of 100 psipressure to the inlet of the test unit. Withthe Handle Assembly (8) in the openposition, apply pressure of 5 and 100 psigto the system and observe for externalleakage. There should be no leakage overa period of at least one minute. Reduce thesystem pressure.7.3.3 C onnect fluid pressure source capable of100 psi pressure to the inlet of test unit.With the test unit in disconnected conditionand the Handle Assembly (8) in the closedposition, apply pressure of 5 and 100 psigto the system and observe for externalleakage. There should be no leakage overa period of at least one minute. Reduce thesystem pressure.7.3.4 Remove test unit from the test system andinstall the dust cap.8.0 ILLUSTRATED PARTS CATALOGTable 1.0 tabulates the parts and sub-assemblies comprising the 64031 Unisex Coupling. The item numbers of the table are keyed to the exploded views of the nozzle diagrammed in Figures 1 and 2.TABLE 1.0 Refer. To Figure 1Item PartNumber Description Units PerAssemblyCouplingOptionUnits/YrSpares/101 220484 Screw...............................................1 All -2 MS29512-03 Packing............................................1 All 103 82123 Ball ...............................................41 All -4 220265 Ball .................................................1 All 55 220153 Spring...............................................1 All 56 MS29513-234 Packing............................................1 All 107 PL24693C50 Screw...............................................2 All -8 47119 HandleAssembly.............................1 All -9 220204 Screw.......................................1 All -10 220145 Spring.......................................1 All -11 220435 Handle......................................1 All -12 220142 Knob.........................................1 All -13 GF16997-32L Screw...............................................2 All -14 220430 Shaft, Upper.....................................1 All -15 MS29513-016 Packing............................................2 All 2016 MS29513-009 Packing............................................2 All 2017 220464 Bushing............................................3 All 3018 220466 Bushing............................................1 All 1019 220449 Ball .................................................1 All -20 220432 Shaft, Lower.....................................1 All -21 220429-1 Housing, Tan...................................1 Allbut V -220429-2 Housing, Green................................1 V-22 220470 Wire, Seal........................................1 All -23 220459 Retainer, Seal..................................1 All -24 220465 Seal .................................................1 All -SM64031 May 2007Item PartNumber Description Units PerAssemblyCouplingOptionUnits/YrSpares/1025 220468 Bumper............................................1 All -26 220446-1 Lug, Long (aluminum)......................1 All but Z, ZV -220800-1 Lug, Long (CRES)...........................1 Z,ZV27 220446-2 Lug, Short (aluminum).....................1 All but Z, ZV -220800-2 Lug, Long (CRES)...........................1 Z,ZV28 GF16997-20L Screw...............................................4 All -29 .094x1.000LDP Pin, Spring.......................................1 All -30 220457 Pin, Lockout.....................................1 All -31 LC030D-8 Spring ............................................. 1 All-32 220467 Seal ............................................. 1 All 1033 220265 Ball ............................................. 1 All -34 220334 Retainer ........................................... 1 All-35 220153 Spring ............................................. 1All- -36 47395 Cap Assy ......................................... 1All-37 28-2-G Sleeve................................... 2 All -38 82499-2000 Cable..................................... 1 All -39 220482 Ring....................................... 1 All-36A 47121-1 Cap Assy, Tan (on older units)......... - All but V -47121-2 Cap Assy, Green (on older units)..... - V -- KD64031-1 Kit of seals for 64031 (any option except G, K & M; use kits -2 thru -4for these options) with single coupling - contains items2,6,7,13,15,16,17,18,24,28,32.- KD64031-2 Kit of seals for 64031JG or JGV only - contains items 2, 6, 7, 13, 15,16, 17, 18, 24, 28, 32, 13A- KD64031-3 Kit of seals for 64031KS only - contains items 2, 6, 7, 13, 15, 16, 17,18, 24, 28, 32, 15A.- KD64031-4 Kit of seals for 64031MS only - contains items 2, 6, 7, 13, 15, 16, 17,18, 24, 28, 32 14A.SM64031 May 2007 TABLE 2.0Refer to Figure 2Item PartNumber Description Units PerAssemblyCouplingOptionUnits/YrSpares/101 221498-1 Inlet, 2” Hose Barb, Tan.............................1 L -221498-2 Inlet, 2” Hose Barb, Green.........................1 LV -2 220381-1 Inlet, 3" Hose Barb, Tan.............................1 D -220381-2 Inlet, 3" Hose Barb, Green.........................1 DV -3 221085-1 Inlet, 4” Hose Barb, Tan.............................1 E -221085-2 Inlet, 4” Hose Barb, Green.........................1 EV -4 220503-1 Inlet, 3" MS33786-48 Flange, Tan.............1 T -220503-2 Inlet, 3" MS33786-48 Flange, Green.........1 TV -5 220510-1 Inlet, 3" Victaulic Groove, Tan...................1 U -220510-2 Inlet, 3" Victaulic Groove, Green................1 UV -6 47305-1 Inlet,D-2/D-2 Flange, Tan.........................1 H - 47305-2 Inlet,D-2/D-2Flange, Green.....................1 HV -7 221183-1 Inlet, 1-1/2” Male NPT, Tan.......................1 N -221183-2 Inlet, 1-1/2” Male NPT, Green....................1 NV -8 220384-1 Inlet, 2" Male NPT, Tan..............................1 J -220384-2 Inlet, 2" Male NPT, Green..........................1 JV -9 220455-1 Inlet, 3" Male NPT, Tan..............................1 S -220455-2 Inlet, 3" Male NPT, Green..........................1 SV -10 221243-1 Inlet, 4” Male BSPP, Tan...........................1 W -221243-2 Inlet, 4” Male BSPP, Green.......................1 WV -11 221084-1 Inlet, 3” Female NPT, Tan.........................1 R -221084-2 Inlet, 3” Female NPT, Green......................1 RV -12 220382-1 Inlet, 2" Male Camlock, Tan.......................1 F -220382-2 Inlet, 2" Male Camlock, Green...................1 FV -13 220383-1 Inlet, 3" Male Camlock, Tan.......................1 P -220383-2 Inlet, 3" Male Camlock, Green...................1 PV -14 20DAL-TN Inlet, 2" Female Camlock, Tan...................1 G -20DAL-GN Inlet, 2" Female Camlock, Green...............1 GV -14A MS27030-6 Gasket............................................1 G,GV 1015 30DAL-TN Inlet, 3" Female Camlock, Tan...................1 K -30DAL-GN Inlet, 3" Female Camlock, Green...............1 KV -15A MS27030-8 Gasket............................................1 K, KV 1016 4030DAL-TN Inlet, 4" Female Camlock, Tan...................1 M -4030DAL-GN Inlet, 4" Female Camlock, Green...............1 MV -16A MS27030-9 Gasket............................................1 M,MV 1017 GF27028-11-TN Dust Cap, 2” Female Camlock, Tan..........1 FQ -GF27028-11-GN Dust Cap, 2” Female Camlock, Green......1 FQV -18 GF27028-17-TN Dust Cap, 4” Female Camlock, Tan..........1 PQ 1GF27028-17-GN Dust Cap, 4” Female Camlock, Green......1 PQV 119 GF27029-11-TN Dust Plug, 2” Male Camlock, Tan..............1 GQ 1GF27029-11-GN Dust Plug, 2” Male Camlock, Green..........1 GQV 1SM64031 May 2007Item PartNumber Description Units PerAssemblyCouplingOptionUnits/YrSpares/1020 GF27029-15-TN Dust Plug, 3” Male Camlock, Tan..............1 KQ 1GF27029-15-GN Dust Plug, 3” Male Camlock, Green..........1 KQV 121 GF27029-17-TN Dust Plug, 4” Male Camlock, Tan..............1 MQ 1GF27029-17-GN Dust Plug, 4” Male Camlock, Green..........1 MQV 122 47307-100 Screen Assy...............................................1 C -23 47306-100 Screen.........................................1 C -24 221181 Ring, Retaining...........................1 C -25 221182 Ring, Inside Retaining.................1 C -SM64031 May 2007FIGURE 1SM64031 May 2007 11Figure 2OptionsAerospace Group Conveyance Systems Division 9650 Jeronimo RdIrvine, CA 92618Ph (949) 452-9500Fax (949) 452-9992。
FURUNO FI-50 导航仪系列产品说明书
Sensors and Accessories (Option)Data displayed•Apparent and true wind speed •Apparent and true wind angle •Maximum true wind speed•MAX/LOW true wind speed alarm •High/Low apparent wind angle alarm •Beaufort wind speed •VMG to windwardThe FI-503 displays critical digital navigation data such as depth, speed, temp, and weather data on a 3-way split screen.Data displayed 1 •Current depth •Shallow/deep alarm•Shallow/deep anchor alarm •Wind angle •High/Low apparent wind angle2 •Boat speed •MAX/AVG STW •SOG•MAX/AVG SOG •VMG to windward •Wind speed •MAX true wind •MAX/LOW true wind speed alarm •Beaufort wind speed3 •LOG •Trip •Count up/down timer •Watertemperature •Air temperature •Air pressure •Humidity •Wind chill temperature •Dew pointApparent and True Wind Angle are displayed in both analog and digital format when connected to the FI-5001/5001L or other CAN bus wind measurement devices.The FI-502 provides detailed and precisewind bearing measurements from 60 Port to 60 Starboard, an important range for CloseHauled (CH) points of sail.The FI-504 and FI-507 feature large digital displays with easy-to-read characters presenting all of the information available in the CAN bus network*. Alternating data display mode switches the user-selected information in 3-second intervals.Data displayed•Displays all information on the FI-50 series* •NAVIGATION(Bearing/distance to WPT, XTE, WPT number/name, L/L, Satellites tracked, Roll & Pitch) •ENVIRONMENT (Battery voltage, Time & Date) •ENGINE (Trip fuel used, Fuel consumption, Engine RPM)Except ROT. ROT can be displayed on FI-505.The FI-505 provides a digital compass readout with an analog “Off Course” needle that greatly assists thehelmsman in maintaining a desired course. When connected to satellite compass, smooth and precise ROT (Rate Of Turn) of the boat is shown with the analog needle. The needle can also be used to verify autopilot steering performance.Data displayed•Current heading •Locked heading •Average heading •Course over ground •ROTWhen connected to an autopilot, the analog FI-506 Rudder Angle Display shows precise rudder angle information.Data displayed •Rudder angleFI-503FI-504FI-507FI-505FI-506FI-501Depth/Speed/Temp SensorDST-800Frequency: 235 kHz Cable: 6 mWind Transducer FI-5001/FI-5001LPower supply: 12 VDC, less than 40 mA Transducer cable: 30/50 mJunction BoxFI-5002CAN bus backbone x 2 portsCAN bus x 6 portsPower supply: 12 VDC, less than 2AFI-502DIGITAL MULTI / MULTI XL COURSE PILOT RUDDERWIND CH WIND Specifications of FI-50 seriesDisplay: Analog and digital LCD (FI-501, 502, 505) Digital LCD (FI-503, 504, 507)Analog (FI-506)Power supply: 12 VDC, less than 0.1 A Temperature: –15°C to +55°C Waterproofing:IP561 DIN type1.5 DIN typeFI-5001FI-5001Land Comfortable Boatings Bright backlit displays with wide viewing angles sAuto-Backlighting feature minimizes power consumption s CAN bus interface offers “Plug and Play” networkings Easy installation with hole-saw flush-mount design s Ideal for mast or bulkhead mounting configurations s White face “F1 Style” gauges provide maximum contrastand visibilitys Latest Organic Light Emitting Diode (OLED) BacklightingTechnology reduces power consumptionPrecision Instrumentation for Safe The FURUNO FI-50 Navigation Instrument Series are professionally designed to meet the needs of all sailing and power boat vessels. These instruments provide a wide variety of precise information,even under the harshest conditions, enhancing your safety at sea.Each easy-to-use display unit utilizes standard CAN bus network connectors and cabling. Data from each component may be fully integrated with any NavNet 3D or other CAN bus system providing an easy “Plug and Play” installation.The FI-503 displays critical digital navigation data such as depth, speed, temp, and •Humidity •Wind chill temperature •Dew pointApparent and True Wind Angle are displayed in both analog and digital format when The FI-502 provides detailed and precise wind bearing measurements from 60 Port to FI-503FI-501FI-502Wind TransducerWind TransducerBasic ConfigurationsSystem ConfigurationsWind TransducerDigital Wind MultiDepth/Speed/TempDepth/Speed/TempDepth/Speed/TempWind Multi Multi XLMulti XLDigital Network Radar Sensor Wind TransducerDepth/Speed/TempWind Multi Digital Network Radar SensorDigitalWindDFF1HUBSatellite Compass Weather StationJunction BoxWAAS/GPS Junction BoxWeather StationSensors and Accessories (Option)The FI-504 and FI-507 feature large digital displays with easy-to-read characters presenting all of the information available in the CAN bus network*. Alternating data display mode switches the user-selected information in 3-second The FI-505 provides a digital compass When connected to an autopilot, the analog FI-506 Rudder Angle FI-504FI-507FI-505FI-506Depth/Speed/Temp Sensor DST-800Wind TransducerFI-5001/FI-5001LPower supply: 12 VDC, less than 40 mA Transducer cable: 30/50 mJunction BoxFI-5002Easy to installDaytimeSunset or afterBack LightTurns OnBack LightTurns OffAutomatic DetectionSurface Mount the displays with a hole saw and install 4 screwsOptional “Low Profile” Flush Mounting front panels provide 1 DIN type1.5 DIN typeFI-5001FI-5001LWind Transducer。
草谷K2 Dyno系统助力世界摩托车锦标赛
草 谷 公 司 ＩＣ ０ 品 精 彩 纷 呈 Ｂ ２１ ０新
Ｋ ｙ ｏ回放 系统增加新功 能 ２Ｄ ｎ Ｋ ｙ ｏ回放系统由 Ｋ２Ｄｙ ｏ慢动作控制器和 Ｋ ｕ ２Ｄ ｎ ｎ ２ Ｓ ｍｍｉ制 ｔ 作客户端服务器组成 。采用该系 统 ，制作人员能够以高清格 式进行
６的 功 能 也 有 所 扩 展 ，多 机 位 编 辑 增 加 至 １ ６路 ｌ Ｏ 摄 像 机 码 流 ， Ｓ
可选择多 种多 画面显示方式 。另外在视频遮 挡、 “ 键和填充”等高 级编辑功能上也有所增强 。
Ｋ ｙ ｎ ｅ切换 台发布新 版本软件 ａｅｎ
Ｋａ ｅ Ｒ ｙ ｎ ｅ新 版 软件 ｖ ２０基于 Ｋ ｍｍｉ和 ｔ Ｉ 务 器 ２ Ｓｕ ｔ ＜ Ｓｏｏ服 ２
Ｌ ｎ ｅ ｔ ｔｗａ ＤＫ Ｃｏ ｎ ｃ ｅ ｙ是 Ｌ Ｇａ ＤＫ系 列 摄 像 机 控 制系 统 中的 新 成 购 买 了 ９套 覃 谷 公 司 Ｋ ｙ ｏ慢 动 作 回 放 系 统 及 Ｋ ｎ Ａ 现 场 ２Ｄ ｎ ２Ｄｙ ｏＰ
员 ，适用于所有 Ｌ ＤＫ高 清摄像机 。它为摄像机 与草谷其他 产品及 制作管理软件 ，用于制作 ２ Ｍｏ ｏ ０１ ０年 ｔ ＧＰ摩托车世界锦标赛的全
和 切 换 台将 用 于 采 集 、制作 原 始 节 目 素材 ，之 后 通 过 Ｔ ２高 清硬 盘 录
Ｅ Ｉ Ｓ发布新版本 ６０ ＤＵ ．
草 谷 公 司 在 Ｉ Ｃ２ １ 发 布 了 Ｅ ＵＳ最 新 版 本 ６０ Ｅ ＵＳ Ｂ ０ ０上 ＤＩ ，。 ＤＩ
６支 持所 有视 频格 式 ，包括 １ ８ ｐ ０６ ０ ０ ５ ／０和 ４ Ｋ数字 电影 格式 ，采 用业内速度最快的 Ａ ＶＣＨＤ编辑格 式，同日支 持所有 业内主流编解 寸 码格式。ＥＤＩＳ ６可 数字 ＳＬ Ｕ Ｒ摄 像机 拍摄的视 频内容 进行编辑。 ＥＤＩ ＵＳ ６的用户可 采用来自 ＳＤＩ 基带视频的代理 服务器素材 。编 辑人员可将任何摄 录一体机的代理服务 器与 ＥＤＩ ＵＳ代理服务器在
VTech 3合1学步车说明书
Moto-carreras 3 en 1. Con ella, los peques iniciarán un viaje repleto de diversión y conocimiento. Gracias a su panel interactivo descubrirán colores, números y lugares por medio de frases motivadoras, retos y canciones. Además, por su carácter evolutivo, el juguete les acompañará distintas fases de su desarrollo al transformarse fácilmente en triciclo, andador y moto de carreras.Bloqueo ruedadelantera LuzmulticolorBotones de flecha• Un chasis. • Dos ruedas traseras. • Un asa.Una rueda frontal. • Una cesta de almacenamiento.Los materiales de este embalaje, tales como cintas, cuerdas, hojas de plástico, alambres, etiquetas, cierres de seguridad y tornillos de embalaje, no son parte de este juguete y deberían ser desechadosCÓMO DESBLOQUEAR EL SISTEMA DE SUJECIÓN DELGire el sistema de sujeción del embalaje ensentido contrario a las agujas del reloj variasTire hacia afuera y descarte esta pieza, ya noNo debe utilizarse por niños mayores de 36 meses. No tiene suficiente resistencia. Máximo 20 kg. de peso. Compruebe con regularidad signos de desgaste o roturas en la unidad o en los mecanismos de cierre. Si alguna pieza está en mal estado, no usar hasta que sea reparadaEste juguete debería ser usado en lugares seguros como interiores, jardines privados, superficies lisas o lugares alejados de coches,Ayude al niño a sentarse en el juguete y a usarlo correctamente.Este juguete debería ser usado con precaución para evitar caídas o choques que pudieran causar daños al usuario o a tercerasal agua. No usar en exteriores en condiciones lluviosas. No dejar Conviene utilizar equipo de protección como casco, guantes,Coloque de nuevo la tapa y cierre el compartimento, asegurándose Se recomienda el uso de pilas alcalinas o pilas recargables (Ni-MH) Instale las pilas correctamente respetando los signos de polaridad• Las pilas deben ser instaladas por un adulto o bajo su supervisión. • Retire las pilas usadas del juguete.• Extraiga las pilas cuando no se vaya a utilizar el juguete durante un largo periodo de tiempo.• No acerque ni tire las pilas al fuego.• No intente recargar pilas normales.• Retire las pilas recargables del juguete para su carga.• Se debe recargar las pilas recargables siempre bajo la vigilancia de un adulto.• Ayúdenos a cuidar nuestro entorno, es responsabilidad de todos. Este símbolo indica que este producto y suspilas no deben tirarse a la basura al final de su vidaútil, sino que deben ser depositados en contenedoresespeciales, para poder reciclarlos adecuadamente y asíevitar daños en el medio ambiente o efectos perjudicialespara la salud. Por favor, respete la normativa vigente yrecurra a un Punto Limpio o a los servicios destinadospara tal fin en su localidad.• Los símbolos Hg, Cd, o Pb indican que las pilas contienen un nivel de mercurio (Hg), cadmio (Cd) o plomo (Pb)mayor del permitido en la directiva europea (2006/66/CE).• La barra debajo del contenedor indica que el producto está en el mercado después del 13 de agosto de 2005.PEGATINAS:Por favor, coloque las pegatinas como se indica a continuación:1746911 10En función de la edad y pericia de su pequeño usuario, este jugueteandador parapara ircuando adquieran una mayor destreza y autonomía. En cualquier caso, por la seguridad del pequeño, es importante que el juego se realice bajo la supervisiónINSTRUCCIONES DE MONTAJE, la seguridad es lo primero. Este juguete requiere el montaje por parte de un adulto. Por la seguridad del niño, no permita que juegue con él ni susMoto-Carreras 3 en 1 estáPara preservar la duración de las pilas, la unidad se apagará automáticamente después de unos minutos de inactividad. Para encender de nuevo el juguete presione cualquiera de sus botones, gire la rueda de actividad, active el arranque o mueva el control de Si el juguete se apaga de repente durante el juego y de manerarepetida o sus luces se vuelven más tenues, recomendamos sustituirCANCIONESCanción 1De compras, de compras,ven junto a mí:fruta y verdura para compartir.Canción 2Al mercado voy a ir,voy a ir, voy a ir.Al mercado voy a ir.Muy sano compraré.Canción 3Postales y cartasescribo a mis amigos.Un sello aquí, otro allá...Y vamos al buzón.Canción 4Conduciendo en moto voy:tengo una misión hoy.Una carta mandaré:Hoy juego a ser cartero.Canción 5Venga sube a mi camión,la sirena sonará.Ese fuego apagaráscon la manguera.Canción 6Ponte en marcha, ponte en marcha,ninoní-ninoní.Llegan los bomberos, llegan los bomberos,a ayudar, a ayudar.Canción 7Conduciendo estoy,en mi moto voy.Protejo al ciudadano porque policía soy.Si emergencias hay, acudo muy veloz.Cuido la ciudad porque policía soy.Canción 8Este poli de patrulla está,vigila la ciudad.La sirena hoy voy a hacer sonar,ningún malo escapará.Canción 9A-B-C-D-E-F-G,H-I-J-K-L-M-N-Ñ,O-P-Q,R-S, T-U-V,W-X-Y-Z.Canción 10Uno, dos y tres,cuatro-cinco-seis,siete-ocho, nueve-diez.¡Todos a contar!Canción 11A conducir,a frenar...Con mi súper moto bien lo pasarás.Canción 12Vente conmigo, tú súbete.Bien lo pasarás.Y recorriendo la ciudad,a todos saludarás.CUIDADO Y MANTENIMIENTO• Limpie el juguete con un paño suave ligeramente húmedo. No utilicedisolventes ni abrasivos.• Manténgalo lejos de la luz directa del sol o de cualquier otra fuente de calor.• Extraiga las pilas cuando el juguete no vaya a ser utilizado durante un largo periodo de tiempo.• No deje caer la unidad sobre superficies duras, ni la exponga a la humedad o al agua.• No trate de reparar la unidad ni de desmontar el producto.SOLUCIÓN DE PROBLEMASSi por alguna razón la unidad deja de funcionar o lo hace con irregularidad, por favor, siga estos pasos:1. Apague el juguete.2. Quite las pilas.3. Deje que la unidad repose durante unos minutos, después vuelva a poner las pilas.4. Encienda el juguete, ahora debería funcionar.5. Si el producto sigue sin funcionar, utilice pilas nuevas.Si el problema continúa, por favor, póngase en contacto con nuestro Servicio de Atención al Cliente a través del teléfono 913120770 (válido únicamente en España) o del correo electrónico*********************.Lasconsultasdebenserrealizadasporun adulto.TM & © 2020 VTech Holdings Limited.Todos los derechos reservados.Impreso en China.Para más información sobre nuestros productos,visite nuestra página web:www.vtech.es。
1车床卡盘和附件Bison
NUMBER OF JAWS DIN 6350 DIN 6350 DIN 6350 DIN 6350 DIN 55026 DIN 55026 DIN 55026 DIN 55026 DIN 55027 DIN 55027 DIN 55027 DIN 55027 DIN 55029 DIN 55029 DIN 55029 DIN 55029 DIN 6350* DIN 6350* DIN 6350* DIN 6350* DIN 6350 DIN 6350 DIN 6350 DIN 6350 DIN 6350 DIN 6350 DIN 55026 DIN 6351 DIN 6351 DIN 6351 DIN 6351
1
LATHE CHUCKS
DESCRIPTION OF PICTOGRAMS & PRODUCT CODING
PICTOGRAMS:
Type of mounting:
Plain Back Mounting
Number of jaws:
2-Jaw
Type of jaws:
Solid jaws
Type A Mounting
MATERIAL STEEL STEEL STEEL STEEL STEEL
PAGE 72 73 74 74 75 76 76 77 77 78 79 79
HD O HD O HD O
MSP
4307 HD 4317 HD 4347 HD 4317 MSP
IV. SPARE PARTS & ACCESSORIES
Type of chuck:
3 – Scroll chuck 4 – Independent and Wescott chuck
First digit
公司航班号
..3…7 .2...6. 1...5.. ..3…. .2...6. …4... ..3..6. 每日 ..3.5.7 .234567 1/2 2/3 3/4 4/5 5/6 6/7
每日
.23.5.7 1..4.6 12.45.7
每日（过夜）
每日 1.3.5.7 每日 每日 每日 每日 每日
乌鲁木齐-伊斯兰堡vv 乌鲁木齐-喀什-伊斯兰堡vv 卡拉奇-伊斯兰堡-北京-东京vv 伊斯兰堡-北京vv
长城航空有 IJ8732/8731 74Y 限公司 IJ8734/8733 74Y
1 2/3 1 ….5..
IJ8736/8735 74Y
1 ….6.
IJ8738/8737 74Y
1 .2…..
IJ8740/8739 74Y
1 …4...
IJ8742/8741 74Y
1 ……7
大韩航空 KE851/852
货班，D1 1JUN-27OCT
货班 货班 货班 货班 货班 货班 货班 货班 货班 货班 货班
KE853/854 KE879/880 KE855/856 KE859/860 KE829/830 KE861/862 KE863/864 KE893/894 KE895/896 KE897/898 KE875/876 KE873/874 KE871/872 KE841/842 KE845/846 KE889/890 KE847/848 KE887/888 KE831/832 KE833/834 KE869/870 KE825/826 KE865/866 KE827/828 KE819/820 KE877/878 KE881/882 KE885/886 KE891/892 KE837/838 KE839/840 KE883/884 KE315/316 KE6315/6316
dynisco高温产品说明书
高温熔体压力传感器使用说明书１．传感器安装注意事项：１．１ 注意保护产品与介质接触部位，在安装前尽量不要取下产品的保护帽。
１．２ 设备开孔需采用专业的开孔工具严格安装我司开孔尺寸开孔并保证孔内无杂质和毛刺。
１．３ 螺纹安装时安装扭矩不得超过５６Ｎ．ｍ．最好在安装前在螺纹处涂抹防脱化合物。
法兰连接时，每个螺栓的预紧力要基本一致。
２．传感器拆卸注意事项：２．１ 清洁设备前必须拆下所有传感器；只有当聚合物为熔融状态下才能拆下传感器并立即用软布将探头部分擦净。
２．２ 传感器拆后，需用专业的清理工具对孔进行清理，以便下次安装。
３．安装环境要求：３．１ 传感器外壳部分必须固定在８０℃以下温度处和不得暴露在水中或潮湿的环境中。
３．２ 设备启动时确保物料为熔融状态，避免低温干扰，从而损坏传感器。
４．过载影响：传感器的量程最好为被测压力源的２倍，传感器需避免长时间过载（产品设计过载能力为１．５倍额定压力）。
５．电缆线连接： 输出信号电缆线必须通过布线槽进行连接，同时需要屏蔽线单独接地，避免现场干扰。
６．零点和满度调节（仅指变送器）：６．１“Ｚ”代表零位调节，“Ｓ”满度调节。
拧开并取下Ｚ和Ｓ处螺钉，用一字螺丝刀内置电位器，在无压力状态下调节零点６．２ 零点调节和满度调节方向：顺时钟方向为增大，反之为减小。
６．３ 一键清零产品调节零点时，只需取下螺钉，用螺丝刀轻按一下内置电位器即可。
９．常见故障及排除：９．１ 变送器信号输出不稳：ａ．压力源本身是一个不稳定的压力；ｂ．仪表或压力传感器抗干扰能力不强；ｃ．传感器接线不牢或者接线部分老化ｄ．传感器本身振动很厉害；ｅ．传感器故障９．２ 变送器接电无输出：ａ．接错线（仪表和传感器都要检查）；ｂ．导线本身的断路或短路；ｃ．电源无输出或电源不匹配；ｄ．仪表损坏或仪表不匹配９．３．机械部分故障：Ａ．探头处有损伤：ａ．开孔过小；ｂ．开孔与螺纹不同心；ｃ．在低温时拆卸传感器。
Ｂ．螺纹损坏：ａ．安装扭矩过大；ｂ低温时拆卸传感器；ｃ．开孔尺寸不对。
森林河 FR3 轻便车辆说明书
WASHER/DRYER PREP
Prepped for a Splendide combo washer/
ATWOOD AIR COMMAND OVERSIZED A/C’S
(2) High output Quiet Air Command™ ducted roof A/C’s with chill construction, dehumidifier & heat pump (front A/C only). More BTUs for more comfort.
1
4
2
3
AUTOMOTIVE BONDED WINDSHIELD/SMALLEST A PILLARS IN CLASS
Our windshields (with lighted logo) are automotive bonded and wrapped in steel to allow for 6" A pillars for better visibility.
50 AMP service with 5,500KW NPS Yamaha Generator; built-in Pure Sine inverter technology, and manual/keyless start. The cleanest power of any generator on the market.
dryer (N/A 32DS). You have the comfort to
孟山都玉米种子--迪卡M753
孟山都玉米种子迪
卡品牌：M753
特征特性
∙中熟、中大穗品种，生育期
121-124天，株高285厘米左右，
穗位125厘米左右，株型紧凑，
茎杆坚韧，抗倒伏能力强；果穗
筒型，穗轴红色，籽粒黄色，马
齿型；轴细粒长，出籽率高达90%
以上，后期籽粒脱水快；适应性
广，耐密性好，高产稳产，增产
潜力大。
栽培要点
∙四月中下旬播种，建议精量播种（亩播种量8000粒），亩保苗5500-6000株，薄地宜稀，肥地宜密；重施拔节肥，加强肥水管理，提高群体增产潜力；大喇叭口期防治玉米螟，后期注重红蜘蛛、叶蝉防治。
审定区域/适宜区域
∙≥10℃有效积温2700℃以上地区均可种植。
审定编号
∙新审玉2011年33号。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
孟山都玉米种子迪
卡品牌：M753
特征特性
∙中熟、中大穗品种，生育期
121-124天，株高285厘米左右，
穗位125厘米左右，株型紧凑，
茎杆坚韧，抗倒伏能力强；果穗
筒型，穗轴红色，籽粒黄色，马
齿型；轴细粒长，出籽率高达90%
以上，后期籽粒脱水快；适应性
广，耐密性好，高产稳产，增产
潜力大。
栽培要点
∙四月中下旬播种，建议精量播种（亩播种量8000粒），亩保苗5500-6000株，薄地宜稀，肥地宜密；重施拔节肥，加强肥水管理，提高群体增产潜力；大喇叭口期防治玉米螟，后期注重红蜘蛛、叶蝉防治。
审定区域/适宜区域
∙≥10℃有效积温2700℃以上地区均可种植。
审定编号
∙新审玉2011年33号。