英文简历电子工程师ELECTRONICSENGINEER(Experienced)

合集下载

电子工程师求职英文简历

电子工程师求职英文简历Electronics engineer in Los AngelesBACKGROUND SUMMARYOver eleven years of extensive computer/electronics experience. Versed in both digital and analog electronics withspecific emphasis on computer hardware/software. Special expertise in system and component evaluation. Network supervisor responsible for installing/maintaining Arcnet LAN system. Proficient in assembly and C programming languages. Excelent communication skills including written, verbal and interpersonal.PROFESSIONAL WORK EXPERIENCE Stevenson Data Systems,Los Angeles,CA 19811993Components Evaluation Engineer 19921993－Responsible for the characterization and evaluation of, and approved vendors list for: Power supplies, oscillators, crystals, and programmable logic used in desktop and laptop computers. Evaluated and recommended quality components that increased product profitability. Created adn developed power supply test plan used for evqluating third party power supplies. Interacted with vendors to resolve problems associated with components qualification. Technical advisor for Purchasing.Promoted to engineer II.Design Evaluation Engineer 19901992－Evaluated new computer product designs , solving environmental problems on prototype computers. Conducted systems analysis on new computer profucts to ensure hardware, software and mechanical design integrity. Designed hardware and software for PC, ISA bus programmable load board used for environmental testing. Performed reliability lift testing on computer systems. Installed/maintained 20 user. Novell, Arcnet LAN system. Examined system and subsystem susceptibility to electrostatic discharge in order to meet IEC8012 industry standards. Analyzed complete power and load of computer system and subsystem to verify power and load estimations.Assistant Engineer 19811990－Performed extensive hardware evaluation ion prototype computers, tested prototype units for timing violation using the latest stateoftheart test equipment, digital oscilloscopes and logic analyzers. Performed emvironmental, ESD and acoustic testing. Designed and built a powerup test used to test prototype computers during cold boot.EDUCATION Bachelor of Science in Electrical EngineeringUniversity of Southern California 1990 Associate in Engineering Electronics University of Southern California 1981。

英文简历(电子工程师)ELECTRONICS ENGINEER(Experienced)

英文简历（电子工程师）ELECTRONICSENGINEER(Experienced) ELECTRONICS ENGINEER (Experienced)Name: [Your Name]Address: [Your Address]Phone: [Your Phone Number]Email: [Your Email]Objective:A highly skilled and experienced Electronics Engineer with a strong background in designing and implementing electronic systems. Seeking a challenging position in a reputable organization where I can utilize my technical expertise and problem-solving skills to contribute to the development and advancement of electronic technologies.Education:- Bachelor of Science in Electronics Engineering, [University Name], [Year]- Master of Science in Electronic Systems Design, [University Name], [Year]Professional Experience:Electronics Engineer, [Company Name], [Year] - Present- Design and develop electronic systems and circuit boards for various consumer electronic products.- Conduct thorough testing and troubleshooting of electronic systems and identify and resolve any technical issues.- Collaborate with cross-functional teams including productmanagers, designers, and software engineers to ensure the seamless integration of electronics into the overall product.- Lead the implementation of embedded systems and firmware for electronic devices.- Provide technical support and guidance to junior engineers and technicians.- Stay updated with the latest advancements in electronic technologies and recommend innovative solutions to enhance product performance.Electronics Engineer, [Company Name], [Year] - [Year]- Designed and implemented customized electronic systems for industrial automation.- Conducted extensive research to identify the best components, materials, and manufacturing techniques to meet project requirements.- Collaborated with manufacturing teams to ensure smooth production and assembly of electronic systems.- Led the testing and validation phase of electronic systems, ensuring adherence to quality standards and specifications.- Developed and maintained documentation including schematics, bill of materials, and work instructions.- Provided technical support to clients and addressed any inquiries or concerns regarding electronic systems.Skills:- Strong knowledge of electronic circuit design, analog and digital electronics, and microcontrollers.- Proficient in using software tools such as Altium Designer, Cadence, MATLAB, and LabVIEW.- Extensive experience in PCB layout and design.- Knowledge of embedded systems programming.- Familiarity with communication protocols such as I2C, SPI, and UART.- Excellent problem-solving and analytical skills.- Strong attention to detail and ability to work in a fast-paced environment.- Effective communication and teamwork abilities.- Fluent in English and [Additional Language]. Achievements:- Developed an innovative energy management system that reduced energy consumption by 20% in a manufacturing facility. - Received the "Outstanding Performance Award" for exceptional technical contributions to a major product launch.- Published research papers in reputable journals on the subject of electronic systems design.References:Available upon request.Note: This is a sample resume for an experienced Electronics Engineer, and it is recommended to customize it according to your specific qualifications, experience, and job requirements.[Your Name][Your Address][Your Phone Number][Your Email]Objective:A highly skilled and experienced Electronics Engineer with a strong background in designing and implementing electronic systems. Seeking a challenging position in a reputable organization where I can utilize my technical expertise and problem-solving skills to contribute to the development and advancement of electronic technologies.Education:- Bachelor of Science in Electronics Engineering, [University Name], [Year]- Master of Science in Electronic Systems Design, [University Name], [Year]Professional Experience:Electronics Engineer, [Company Name], [Year] - PresentIn my current role as an Electronics Engineer, I have designed and developed electronic systems and circuit boards for various consumer electronic products. I am responsible for conducting thorough testing and troubleshooting of electronic systems, identifying and resolving any technical issues that arise. I collaborate with cross-functional teams, including product managers, designers, and software engineers, to ensure the seamless integration of electronics into the overall product. Additionally, I lead the implementation of embedded systems and firmware for electronic devices, providing technical support and guidance to junior engineers and technicians. I also stay updated with the latest advancements in electronic technologies and recommend innovative solutions to enhance product performance. During my tenure at [Company Name], I have successfullycompleted several projects, significantly contributing to the organization's growth and success. One notable achievement includes the development of an innovative energy management system that reduced energy consumption by 20% in a manufacturing facility. This project involved designing and implementing a complex electronic system that allowed for efficient monitoring and control of energy usage. Through extensive research and collaboration with manufacturing teams, I was able to identify the best components, materials, and manufacturing techniques to meet project requirements. The system was widely recognized for its effectiveness and received positive feedback from the client.In addition to design and implementation, I have also played a crucial role in the testing and validation phase of electronic systems at [Company Name]. I ensure adherence to quality standards and specifications, closely monitoring the performance of the systems and making necessary adjustments or improvements as required. I have developed and maintained documentation throughout the process, including schematics, bill of materials, and work instructions, to facilitate the production and assembly of electronic systems.Prior to my current role, I worked as an Electronics Engineer at [Company Name]. In this position, I specialized in designing and implementing customized electronic systems for industrial automation. I conducted in-depth research to identify the best components, materials, and manufacturing techniques for each project. I collaborated closely with manufacturing teams to ensure smooth production and assembly of electronic systems.Furthermore, I provided technical support to clients, handling inquiries and addressing concerns regarding electronic systems. Skills:I have a strong knowledge of electronic circuit design, analog and digital electronics, and microcontrollers. I am proficient in using software tools such as Altium Designer, Cadence, MATLAB, and LabVIEW. With extensive experience in PCB layout and design, I am able to create efficient and reliable electronic systems. I have a solid understanding of embedded systems programming and am familiar with communication protocols such as I2C, SPI, and UART. Additionally, I possess excellent problem-solving and analytical skills, which I have consistently demonstrated throughout my career. I have a keen attention to detail and am able to work in a fast-paced environment without compromising quality.I am also an effective communicator and enjoy working as part ofa team.Achievements:- Developed an innovative energy management system that reduced energy consumption by 20% in a manufacturing facility. - Received the "Outstanding Performance Award" for exceptional technical contributions to a major product launch.- Published research papers in reputable journals on the subject of electronic systems design.References:Available upon request.Note: This is a sample resume for an experienced ElectronicsEngineer, and it is recommended to customize it according to your specific qualifications, experience, and job requirements.。

电子工程师英文个人简历模板

电子工程师英文个人简历模板electronics engineer(experienced)sandy lin 15/f,tower2 ,bright china,building1,beijing.background summaryover eleven years of extensive computer/electronicsexperience.versed in both digital and analog electronics withspecific emphasis on computer hardware/software.special expertise in system and component work supervisor responsible forinstalling/maintaining arcnet lan system.proficient in assembly and c programming languages.excelent communication skills including written,verbal and interpersonal.professional work experiencestevenson data systems,los angeles,ca 1981-1993components evaluation engineer 1992-1993responsible for the characterization and evaluation of, and approved vendors list for:power supplies,oscillators,crystals,and programmable logic used in desktop and laptop computers.evaluated and recommended quality components that increased productprofitability.created adn developed power supply test plan used for evqluating third party power supplies.interacted with vendors to resolve problems associated with components qualification.technical advisor for purchasing.promoted to engineer ii.design evaluation engineer 1990-1992evaluated new computer product designs ,solving environmental problems on prototype computers.conducted systems analysis on new computer profucts to ensure hardware,software and mechanical designintegrity.designed hardware and software for pc,isa bus programmable load board used for environmental testing.performed reliability lift testing on computer systems.installed/maintained 20user.novell,arcnet lan system.examined system and sub-system susceptibility to electrostatic discharge in order to meet iec-801-2 industry standards.analyzed complete power and load of computer system and subsystem to verify power and load estimations.assistant engineer 1981-1990performed extensive hardware evaluation ion prototype computers,tested prototype units for timing violation using the latest state-of-the-art test equipment,digital oscilloscopes and logic analyzers.performed emvironmental,esd and acoustictesting.designed and built a power-up test used to test prototype computers during cold boot.educationbachelor of science in electrical engineering--university of southern california 1990associate in engineering electronics--university of southern california 1981job descriptions emphasize candidate's accomploshments.work history is stated in reverse chronological order,with most recent employment listed first.。

电子工程师英文简历模板精选.doc

电子工程师英文简历模板精选一份内容充实的英文简历往往会给面试官留下好的印象，下面为大家精选电子工程师英文简历模板，电子工程师英文简历模板精选JOB OBJECTIVEElectronics engineer in Los AngelesBACKGROUND SUMMARYOver eleven years of extensive computer/electronics experience. Versed in both digital and analog electronics withspecific emphasis on computer hardware/software. Special expertise in system and component evaluation. Network supervisor responsible for installing/maintaining Arcnet LAN system. Proficient in assembly and C programming languages. Excelent communication skills including written，verbal and interpersonal.PROFESSIONAL WORK EXPERIENCEStevenson Data Systems，Los Angeles，CA 1981-1993Components Evaluation Engineer 1992-1993-Responsible for the characterization and evaluation of，and approved vendors list for: Power supplies，oscillators，crystals，and programmable logic used in desktop and laptop computers. Evaluated and recommended quality components that increased product profitability. Created adn developed power supply test plan used for evqluating thirdparty power supplies. Interacted with vendors to resolve problems associated with components qualification. Technical advisor for Purchasing. Promoted to engineer II.Design Evaluation Engineer 1990-1992-Evaluated new computer product designs ，solving environmental problems on prototype computers. Conducted systems analysis on new computer profucts to ensure hardware，software and mechanical design integrity. Designed hardware and software for PC，ISA bus programmable load board used for environmental testing. Performed reliability lift testing on computer systems. Installed/maintained 20 user. Novell，Arcnet LAN system. Examined system and sub-system susceptibility to electrostatic discharge in order to meet IEC-801-2 industry standards. Analyzed complete power and load of computer system and subsystem to verify power and load estimations.Assistant Engineer 1981-1990-Performed extensive hardware evaluation ion prototype computers，tested prototype units for timing violation using the latest state-of-the-art test equipment，digital oscilloscopes and logic analyzers. Performed emvironmental，ESD and acoustic testing. Designed and built a power-up test used to test prototype computers during cold boot.EDUCATIONBachelor of Science in Electrical EngineeringUniversity of Southern California 1990Associate in Engineering ElectronicsUniversity of Southern California 1981英文简历的七大技巧1、教育背景中写相关课程。

电子工程师英文简历

电子工程师英文简历EMPLOYMENT OBJECTIVEElectronicsengineer with a foreign enterprise in Beijing City.BACKGROUND SUMMARYOver eleven years of extensive computer/electronics experience.Versed in both digital and analog electronics withspecific emphasis on computer hardware/ software.Special expertise in system and component evaluation. Network supervisor responsible for installing/maintaining Arcnet LAN system.Proficient in assembly and C programming languages.Excelent communication skills including written,verbal and interpersonal.PROFESSIONAL WORK EXPERIENCEStevenson Data Systems,Los Angeles,CA 19811993Responsible for the characterization and evaluation of, and approved vendors list for:Power supplies, oscillators,crystals,and programmable logic used in desktop and laptop computers. Evaluated and recommended quality components that increased product profitability.Created adn developed power supply test plan used for evqluating third party power supplies.Interacted with vendors to resolve problems associated with components qualification. Technicaladvisor for Purchasing. Promoted to engineer II.··Design Evaluation Engineer 19901992Evaluated new computer product designs ,solving environmental problems on prototype computers. Conducted systems analysis on new computer profucts to ensure hardware,software and mechanical design integrity.Designed hardware and software for PC,ISA bus programmable load board used for environmental testing.Performed reliability lift testing on computer systems. Installed/maintained 20 user. Novell,Arcnet LAN system.Examined system and subsystem susceptibility to electrostatic discharge inorder to meet IEC8012 industry standards.Analyzed complete power and load of computer system and subsystem to verify power and load estimations.··Assistant Engineer 19811990Performed extensive hardware evaluation ion prototype computers,tested prototype units for timing violation using the latest stateoftheart test equipment,digital oscilloscopes and logic analyzers. Performed environmental, ESD and acoustic testing.Designed and built a powerup test used to test prototype computers during cold boot.EDUCATIONBachelor of Science in Electrical EngineeringUniversity of Southern California 1990Associate in Engineering ElectronicsUniversity of Southern California 1981PERSONAL INFORMATIONSex ：Male Birthday：November,8th,19xxMarital Status：Single Nativeplace： BeijingTele：(8610)12345678。

英文简历（电子工程师）5篇

英文简历（电子工程师）5篇第一篇：英文简历(电子工程师)英文简历（电子工程师）ELECTRONICS ENGINEER(Experienced)Sandy Lin 15/F,TOWER2 ,BRIGHT CHINA,BUILDING1,BEIJING.BACKGROUND SUMMARY Over eleven years of extensive computer/electronics experience.Versed in both digital and analog electronics withspecific emphasis on computerhardware/software.Special expertise in system and component work supervisor responsible for installing/maintaining Arcnet LAN system.Proficient in assembly and C programming languages.Excelent communication skills including written,verbal and interpersonal.PROFESSIONAL WORK EXPERIENCEStevenson Data Systems,Los Angeles,CA 1981-1993Components Evaluation Engineer 1992-1993Responsible for the characterization and evaluation of, and approved vendors list for:Power supplies,oscillators,crystals,and programmable logic used in desktop and laptop computers.Evaluated and recommended quality components that increased product profitability.Created adn developed power supply test plan used for evqluating third party power supplies.Interacted with vendors to resolve problems associated with components qualification.Technical advisor for Purchasing.Promoted to engineer II.Design Evaluation Engineer 1990-1992Evaluated new computer product designs ,solving environmental problems on prototype computers.Conductedsystems analysis on new computer profucts to ensure hardware,software and mechanical design integrity.Designed hardware and software for PC,ISA bus programmable load board used for environmental testing.Performed reliability lift testing on computer systems.Installed/maintained 20user.Novell,Arcnet LAN system.Examined system and sub-system susceptibility to electrostatic discharge in order to meet IEC-801-2 industry standards.Analyzed complete power and load of computer system and subsystem to verify power and load estimations.Assistant Engineer 1981-1990Performed extensive hardware evaluation ion prototype computers,tested prototype units for timing violation using the latest state-of-the-art test equipment,digital oscilloscopes and logic analyzers.Performed emvironmental,ESD and acoustic testing.Designed and built a power-up test used to test prototype computers during cold CATIONBachelor of Science in Electrical Engineering--University of Southern California 1990Associate in Engineering Electronics--University of Southern California 1981最专业的简历模板网站第二篇：电子工程师英文简历电子工程师英文简历ELECTRONICS ENGINEER(Experienced)Sandy Lin 15/F,TOWER2 ,BRIGHT CHINA,BUILDING1,BEIJING.BACKGROUND SUMMARY Over eleven years of extensive computer/electronics experience.Versed in both digital and analog electronics withspecific emphasis on computerhardware/software.Special expertise in system andcomponent work supervisor responsible for installing/maintaining Arcnet LAN system.Proficient in assembly and C programming languages.Excelent communication skills including written,verbal and interpersonal.PROFESSIONAL WORK EXPERIENCEStevenson Data Systems,Los Angeles,CA 1981-1993Components Evaluation Engineer 1992-1993Responsible for the characterization and evaluation of, and approved vendors list for:Power supplies,oscillators,crystals,and programmable logic used in desktop and laptop computers.Evaluated and recommended quality components that increased product profitability.Created adn developed power supply test plan used for evqluating third party power supplies.Interacted with vendors to resolve problems associated with components qualification.Technical advisor for Purchasing.Promoted to engineer II.Design Evaluation Engineer 1990-1992Evaluated new computer product designs ,solving environmental problems on prototype computers.Conducted systems analysis on new computer profucts to ensure hardware,software and mechanical design integrity.Designed hardware and software for PC,ISA bus programmable load board used for environmental testing.Performed reliability lift testing on computer systems.Installed/maintained 20user.Novell,Arcnet LAN system.Examined system and sub-system susceptibility to electrostatic discharge in order to meet IEC-801-2 industry standards.Analyzed complete power and load of computer system and subsystem to verify power and load estimations.Assistant Engineer 1981-1990Performed extensive hardware evaluation ion prototypecomputers,tested prototype units for timing violation using the latest state-of-the-art test equipment,digital oscilloscopes and logic analyzers.Performed emvironmental,ESD and acoustic testing.Designed and built a power-up test used to test prototype computers during cold CATIONBachelor of Science in Electrical Engineering--University of Southern California 1990Associate in Engineering Electronics--University of Southern California 1981Job descriptions emphasize candidate's accomploshments.Work history is stated in reverse chronological order,with most recent employment listed first第三篇：英文简历（电子工程师）ELECTRONICSBACKGROUNDSUMMARYOverelevenyearsofexteivecomputer/electronicsexperience.V ersedinbothdigitalandanalogelectronicswithecificemphasisonco mputerhardware/software.ecialexpertiseinsystemandcomponen worksupervisorreoibleforitalling/maintainingArc netLANsystem.ProficientinaemblyandCprogramminglanguages. Excelentcommunicationskillsincludingwritten,verbalandinterpersonal.PROFEI ONALWORKEXPERIENCESteveonDataSystems,LosAngeles,CA1981-1993ComponentsEvaluationEngineer1992-1993Reoibleforthecharacterizationandevaluationof,andarovedve ndorslistfor:Powersulies,oscillators,crystals,andprogrammablelo gicusedindesktopandlaptopcomputers.Evaluatedandrecommen dedqualitycomponentsthatincreasedproductprofitability.Created adndevelopedpowersulytestplanusedforevqluatingthirdpartypo wersulies.Interactedwithvendorstoresolveproblemsaociatedwithcomponentsqualification.TechnicaladvisorforPurchasing.Promot edtoengineerII.DesignEvaluationEngineer1990-1992 Evaluatednewcomputerproductdesig,solvingenvironmentalp roblemsonprototypecomputers.Conductedsystemsanalysisonne wcomputerprofuctstoeurehardware,softwareandmechanicaldesi gnintegrity.DesignedhardwareandsoftwareforPC,ISAbusprogram mableloadboardusedforenvironmentaltesting.Performedreliabili tylifttestingoncomputersystems.Italled/maintained20user.Novell ,ArcnetLANsystem.Examinedsystemandsub-systemsusceptibilitytoelectrostaticdischargeinordertomeetIEC-801-2industrystandards.Analyzedcompletepowerandloadofcompute rsystemandsuystemtoverifypowerandloadestimatio.AistantEngin eer1981-1990Performedexteivehardwareevaluationionprototypecomputer s,testedprototypeunitsfortimingviolationusingthelateststate-of-the-arttestequipment,digitaloscilloscopesandlogicanalyzers.Perform edemvironmental,ESDandacoustictesting.Designedandbuiltapo CATIO NBachelorofScienceinElectricalEngineering--UniversityofSouthernCalifornia1990BACKGROUNDSUMMARYOverelevenyearsofexteivecomputer/electronicsexperience.V ersedinbothdigitalandanalogelectronicswithecificemphasisonco mputerhardware/software.ecialexpertiseinsystemandcomponen worksupervisorreoibleforitalling/maintainingArc netLANsystem.ProficientinaemblyandCprogramminglanguages.Excelentcommunicationskillsincludingwritten,verbalandinterpers onal.PROFEIONALWORKEXPERIENCESteveonDataSystems,LosAngeles,CA1981-1993ComponentsEvaluationEngineer1992-1993Reoibleforthecharacterizationandevaluationof,andarovedve ndorslistfor:Powersulies,oscillators,crystals,andprogrammablelo gicusedindesktopandlaptopcomputers.Evaluatedandrecommen dedqualitycomponentsthatincreasedproductprofitability.Created adndevelopedpowersulytestplanusedforevqluatingthirdpartypo wersulies.Interactedwithvendorstoresolveproblemsaociatedwith componentsqualification.TechnicaladvisorforPurchasing.Promot edtoengineerII.DesignEvaluationEngineer1990-1992 Evaluatednewcomputerproductdesig,solvingenvironmentalp roblemsonprototypecomputers.Conductedsystemsanalysisonne wcomputerprofuctstoeurehardware,softwareandmechanicaldesi gnintegrity.DesignedhardwareandsoftwareforPC,ISAbusprogram mableloadboardusedforenvironmentaltesting.Performedreliabili tylifttestingoncomputersystems.Italled/maintained20user.Novell ,ArcnetLANsystem.Examinedsystemandsub-systemsusceptibilitytoelectrostaticdischargeinordertomeetIEC-801-2industrystandards.Analyzedcompletepowerandloadofcompute rsystemandsuystemtoverifypowerandloadestimatio.AistantEngin eer1981-1990Performedexteivehardwareevaluationionprototypecomputer s,testedprototypeunitsfortimingviolationusingthelateststate-of-the-arttestequipment,digitaloscilloscopesandlogicanalyzers.Perform edemvironmental,ESDandacoustictesting.Designedandbuiltapo wer-CATIO NBachelorofScienceinElectricalEngineering--UniversityofSouthernCalifornia1990[page_break] AociateinEngineeringElectronics--UniversityofSouthernCalifornia1981Jobdescriptioemphasizecandidate'saccomploshments.Work historyisstatedinreversechronologicalorder,withmostrecentempl oymentlistedfirst.第四篇：质量工程师英文简历质量工程师******** XuBrief Bio:Born on Aug.21, 1979, in Jiaxing, Zhejiang ProvinceGraduate from Department of Physics, ******** University of Shanghai(1997-2001)as BachelorAssociate engineer in Product Reliability Engineering in******ShanghaiEngineer in Process Reliability Development in ******* Beijing, 2004-2005Quality engineer in ********, since Sep.2005Experience:Part I--ManagementSet up ********* both in Shanghai(2001)and Beijing(2004)for ******:--evaluate equipments of process and product reliability tests--plan layout and coordinate facility systemManager of the ********Shanghai(2001-2004), in charge of: --spare parts--human resource--PM and calibration, etc.Coordinator and internal auditor of ISO9001, ISO14001 and OHSAS18001,CCAR and inline MRB chairman for 4 customers of Amkor China(CABGA, PBGA and FCPGA)Internal quality project owner of:--Customer audit analysis--Automation system--Factory moving qualification, etc.In a short summary:Various experiences in quality system, customer audit, task force teamwork, and management of resources.Experience: Part II--TechnologyOwner of package related product reliability tests(2001-2004), including pre-conditioning, TC, TS, THB, HAST, PCT, etc.Owner of wafer level process reliability tests(2004-2005), including:--Dielectric related: TDDB, Vramp, Jramp, constant-J and P2ID--Device related: HCI and NBTI--Interconnection related: Isothermal, SWEAT and IrampIn a short summary:Comprehensive in reliability, parametric and functional tests, from the failure mechanism to the test methodology.Skills: Implant PDCA and teamwork into everyday workFluent in both written and spoken English, and acknowledged outstanding in expression and communication Familiar with UNIX system, as well as C and BASIC programmingFamiliar with Excel macro programming for data analysisFamiliar with statistical concept and tools, good at DOE andanalysis by JMPContact me if you are interested:Tel:(0)136********Email: *******@ or *******@第五篇：英文简历(工业工程师)英文简历（工业工程师）INDUSTRIAL ENGINEERSandy Lin 15/F,TOWER2 ,BRIGHT CHINA,BUILDING1,BEIJING.PROFESSIONAL EXPERIENCE 1985-Present LEYNER CORPORATION,Lake Charles,LAIndustrial EngineerProvide floor support engineering in printed wire assembly(PWA)and subsystem assembly(SSA)areas.Purchase capital equipment.Interface with vendors.Justify expenditures.Design plant layout fixtures,and flow charts of material.Program automatic equipment.Write process sheets and rework procedures.Recommend changes to product to allow ease of manufacture.Implement design changes.Inititate methods and process improvements.Troubleshoot problems.Effect disposition or rejection of material.Provide assistance to all other departments.1984 PRUDENCE D.MCHARRISON LABORATORY,Ruston,LAEngineering AssistantConducted variety of tests including pression,and creep tests on molded parts.Responsible for production of plastic test specimens,and mounting polishing,and microscopic analysis.Designed tools and fixtures for Instron machine.1982/83 DUCHESS COMPONENTS,Baton Rouge,LAMolding Room Attendant,1983Operated and maintained machine producing epoxypreforms.Maintained records on inventory,loss of material,and quality control.Machine shop attendant,1982Operated lathes,milling and grinding machines;monitored welding and heat treatments.Read CATION LOYOLA UNIVERSITY AT NEW ORLEANS,College of Engineering,New Orleans,LABachelor of Science Degree in Industrial Technology,1985Minor concentration in computer science.PROFESSIONAL AFFILIATIONS/CERTIFICATIONSMember,Society of Manufacturing Engineers,Leaner Management Club Certified Manufacturing Technologist and Solderer.NOTICE最专业的简历模板网站。

2017电子工程师英文简历范文

电子工程师英文简历2017电子工程师英文简历范文简历阐述你的.技巧、能力、经验时要尽可能准确，不夸大也不误导，不要模糊处理，同时要确信你所写的与你的实际能力及工作水平相符。

2017电子工程师英文简历范文篇一yjbysMale, 23,Education: collegeWorking lives: within 1 yearExpected salary: 3000-5000 yuanWorking location: guangzhou - there is no limitObjective: electronic engineer | | electronic technology research and development engineer | sewing worker/electronics/electrical engineer apprenticeship | electrical maintenance technicianStrong interpersonal communication skills Ability to perform Good faith honest a strong sense of responsibility strong learning abilityWork experience (work for 2 months, do 1 job)Gree building motor manufacturing co., LTDWorking hours: between December 2016 and February 2016 [two months]Job title: internEducation experienceGraduated in June 2017 Guangdong vocational college of science and technology of application of electronic technology Self descriptionHimself has the rolling compaction circuit related basictheoretical knowledge and practical experience, for electronic circuits, the breakdown maintenance, electrical components, know some, can bear spirit; To understand the basic principle of electronic chart, also will use DXP draw PCB, draw the circuit principle diagram, and electronic drafting intermediate, and advanced certificate; Can know the basic professional English; Can the JAVA development is designed according to the demand, still can design the PLC programming. My temper easygoing, kind, good at communicating with people, can hit it off with your classmates at ordinary times, interpersonal relationships well, believe in your company will be able to get along with your colleagues is very happy, work together, struggle for your company brilliant tomorrow. Sincerely hope that your company can give me a chance to work for your company, by the way, could you let me have a chance to show their talents. Whether can become the staff of your company, I sincerely congratulations on your company is thriving and prosperous. 2017电子工程师英文简历范文篇二yjbysMale, 23, The cantoneseEducation: collegeWorking years: 1 to 2 yearsExpected salary: 3000-5000 yuanWorking location: guangzhou - there is no limitObjective: circuit engineer | electrical engineer engineers/technicians | | automatic control electronics/electrical engineersWork experience (work 1 year 1 month, do 1 job)Zhongshan Fred sanitary equipment co., LTDWorking time: in August 2015 to September 2016 [1] 1 yearJob title: technicianWork content: responsible for product installation and debugging, parts assembly, process improvement.Education experienceGraduated in June 2016 Guangdong electromechanical vocational and technical college in electrical automation Professional skillsAutoCAD: skilled experience: 1 yearCertificate of awardCertificate of title: the national computer level certificate Issued by time: in January 2014Certificate name: time for English class B issued: in December 2014The name of the certificate: electrician license issued by time: in January 2015Certificate of title: senior maintenance electrician certificate issued by time: in January 2016Certificate of title: C1 driver's license issued by time: in December 2016Self descriptionIn the aspect of human, I'm kind, honest, cheerful confidence, able to bear hardships. In life, I respect other people, to be able to get along with others, so, I hope you give me this opportunity, I have enough confidence in a very short period of time is qualified for the job, become the good assistant of the company's future development, thank you.。

英文简历模板制作：电子工程师英文简历范例

Everyone will be tired, no one can bear all the sorrow for you, there will always be some time for people to learn to grow up by themselves.精品模板助您成功！（页眉可删）英文简历模板制作：电子工程师英文简历范例英文简历模板制作：电子工程师英文简历范例ELECTRONICS ENGINEER(Experienced)BACKGROUND SUMMARYOver eleven years of extensive computer/electronics experience.Versed in both digital and analog electronics withspecific emphasis on computerhardware/software.Special expertise in system and component work supervisor responsible for installing/maintaining Arcnet LAN system.Proficient in assembly and C programming languages.Excelent communication skills including written,verbal and interpersonal.PROFESSIONAL WORK EXPERIENCEStevenson Data Systems,Los Angeles,CA 1981-1993Components Evaluation Engineer 1992-1993Responsible for the characterization and evaluation of, and approved vendors list for:Powersupplies,oscillators,crystals,and programmable logic used in desktop and laptop computers.Evaluated and recommended quality components that increased product profitability.Created adn developed power supply test plan used for evqluating third party power supplies.Interacted with vendors to resolve problems associated with components qualification.Technical advisor for Purchasing.Promoted to engineer II.Design Evaluation Engineer 1990-1992Evaluated new computer product designs ,solving environmental problems on prototype computers.Conducted systems analysis on new computer profucts to ensure hardware,software and mechanical designintegrity.Designed hardware and software for PC,ISA bus programmable load board used for environmentaltesting.Performed reliability lift testing on computer systems.Installed/maintained 20 user.Novell,Arcnet LAN system.Examined system and sub-system susceptibility to electrostatic discharge in order to meet IEC-801-2 industry standards.Analyzed complete power and load of computer system and subsystem to verify power and load estimations.Assistant Engineer 1981-1990Performed extensive hardware evaluation ion prototype computers,tested prototype units for timing violation using the latest state-of-the-art test equipment,digital oscilloscopes and logic analyzers.Performed emvironmental,ESD and acoustic testing.Designed and built a power-up test used to test prototype computers during cold boot.EDUCATIONBachelor of Science in Electrical Engineering--University of Southern California 1990Associate in Engineering Electronics--University of Southern California 1981Job descriptions emphasize candidate's accomploshments.Work history is stated in reverse chronological order,with most recent employment listed first.。

【2019-2020】实用职场英文简历：(电子工程师)ELECTRONICSword版本 (2页)

【2019-2020】实用职场英文简历：（电子工程师）ELECTRONICSword版本本文部分内容来自网络整理，本司不为其真实性负责，如有异议或侵权请及时联系，本司将立即删除！== 本文为word格式，下载后可方便编辑和修改！ ==实用职场英文简历：（电子工程师）ELECTRONICSELECTRONICS ENGINEER ( Experienced )Sandy Lin 15/ F , TOWER 2 , BRIGHT CHINA , BUILDING 1, BEIJING . BACKGROUND SUMMARYOver eleven years of extensive computer / electronics experience . Versed in both digital and analog electronics withspecific emphasis on computer hardware / software . Special expertise in system and component evaluation . Network supervisor responsible for installing / maintaining Arcnet LAN system . Proficient in assembly and C programming languages . Excelent communication skills including written , verbal and interpersonal .PROFESSIONAL WORK EXPERIENCEStevenson Data Systems , Los Angeles , CA 1981-1993Components Evaluation Engineer 1992-1993Responsible for the characterization and evaluation of , and approved vendors list for : Power supplies , oscillators , crystals , and programmable logic used in desktop and laptop computers . Evaluated and recommended quality components that increased productprofitability . Created adn developed power supply test plan used for evqluating third party power supplies . Interacted with vendors to resolve problems associated with components qualification . Technical advisor for Purchasing . Promoted to engineer II .Design Evaluation Engineer 1990-1992Evaluated new computer product designs , solving environmental problems on prototype computers . Conducted systems analysis on new computer profucts to ensure hardware , software and mechanical design integrity . Designed hardware and software for PC , ISA bus programmable load board used for environmental testing . Performed。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

Ó¢ÎÄ¼òÀú£¨µç×Ó¹¤³ÌÊ¦£©ELE CTRONICS ENGINEER(Experienced) ¡¡¡¡Sandy Lin 15/F,TOWER2 ,BRIGHT CHINA,BUILDING1,BEIJING.
¡¡¡¡
¡¡¡¡BACKGROUND SUMMARY
¡¡¡¡Over eleven years of extensive computer/electronics experience.Versed in both digital and analog electronics withspecific emphasis on computer hardware/software.Special expertise in system and component work supervisor responsible for installing/maintaining Arcnet LAN system.Proficient in assembly and C programming languages.Excelent communication skills including written,verbal and interpersonal.
¡¡¡¡
¡¡¡¡PROFESSIONAL WORK EXPERIENCE
¡¡¡¡Stevenson Data Systems,Los Angeles,CA 1981-1993
¡¡¡¡Components Evaluation Engineer 1992-1993
¡¡¡¡Responsible for the characterization and evaluation of, and approved vendors list for:Power supplies,oscillators,crystals,and programmable logic used in desktop and laptop computers.Evaluated and recommended quality components that increased product profitability.Created adn developed power supply test plan used for evqluating third party power supplies.Interacted with vendors to resolve problems associated with components
qualification.Technical advisor for Purchasing.Promoted to engineer II. ¡¡¡¡
¡¡¡¡Design Evaluation Engineer 1990-1992
¡¡¡¡Evaluated new computer product designs ,solving environmental problems on prototype computers.Conducted systems analysis on new computer profucts to ensure hardware,software and mechanical design integrity.Designed hardware and software for PC,ISA bus programmable load board used for environmental testing.Performed reliability lift testing on computer systems.Installed/maintained 20 user.Novell,Arcnet LAN system.Examined system and sub-system susceptibility to electrostatic discharge in order to meet IEC-801-2 industry standards.Analyzed complete power and load of computer system and subsystem to verify power and load estimations.
¡¡¡¡
¡¡¡¡Assistant Engineer 1981-1990
¡¡¡¡Performed extensive hardware evaluation ion prototype computers,tested prototype units for timing violation using the latest state-of-the-art test equipment,digital oscilloscopes and logic analyzers.Performed emvironmental,ESD and acoustic testing.Designed and built a power-up test used to test prototype computers during cold boot.
¡¡¡¡
¡¡¡¡EDUCATION
¡¡¡¡Bachelor of Science in Electrical Engineering
¡¡¡¡--University of Southern California 1990
¡¡¡¡Associate in Engineering Electronics
¡¡¡¡--University of Southern California 1981
¡¡¡¡
¡¡¡¡Job descriptions emphasize candidate's accomploshments.
¡¡¡¡Work history is stated in reverse chronological order,with most recent employment listed first.。