Sn100无铅锡线物质安全资料表MSDS

合集下载

无铅锡丝物质安全资料表MSDS

无铅锡丝物质安全资料表MSDS

1制造商或供应商资料 Manufacturer Information2物质分类 The material classification名称化学式比率Common NameChemical Formulaweight %CAS. No.A(mg/ STEL(mg/ m3)CEILINGLD 50LD 50锡 Tin Sn Bal.7440-31-524N/A N/A N/A 银yin Ag 0.3±0.17440-43-61N/A N/A N/A N/A 铜 Copper Cu 0.7±0.17440-50-80.2N/A N/A N/A N/A 松香Rosin-3.0±0.265997-06-00.1N/AN/AN/AN/A传真Fax #地址Address 公司资料Company Name测试动物吸收途径测试动物吸收途径联络人Person in Charge 紧急连络电话Emergency Phone #产品种类Product Type无铅锡丝Lead-Free Solder Wire物质安全资料表Material Safety Data Sheet成份ingredients化学文摘社登记号码时量平均容许浓度短时间时量平均容许浓度最高容许浓度3物质定义 The material definition物质状态及外观Physical State and Appearance紧急情况概要Emergency Overview避免接触到眼睛. 严禁吞食. 避免吸入粉尘. 避免过长或是反覆的皮肤接触. 保持容器紧闭. 当空流通良好时使, 并于使用后彻底洗净.with adequate ventilation. Wash thoroughly after handling.潜入人体的途径 Routes of Entry 潜在的急性健康影响眼睛如果发生眼睛接触(刺激物, 腐蚀物), 这产品可能是有害的.Potential Acute Health Effects眼睛接触可能导致角膜受损或是失明.Eyes This product may be hazardous in case of eye contact ( irritant,corrosive ).Eye contact can result in corneal damage or blindness.皮肤如果发生皮肤接触(刺激物, 致敏物质), 这产品可能是有害的.对皮肤为非腐蚀性, 非渗透性. 皮肤发炎的症状有发痒, 鳞癣, 发红或是偶尔起水泡.Skin This product may be hazardous in case of skin contact ( irritant, sensitizer).Non-corrosive for skin.Non-permeator by skin. Skin inflammation ischaracterized by itching,scaling,reddening,or,occasionally,blistering.吸入如果发生吸入的情况, 这个产品所产生的烟尘可能是有害的.Inhalation Fumes and/or dusts produced by this product may be hazardous in case ofinhalation.吞食如果发生吞食的情况, 这个产品所产生的烟尘可能是有害的.Ingestion Fumes and/or dusts produced by this product may be hazardous in case ofingestion.潜在的慢性病影响如果发生吞食或吸入的情况, 这个产品所产生的烟尘可能是有害的.Potential Chronic Health Effects如果发生皮肤接触( 刺激物, 致敏物质 ), 或是眼睛接触 ( 刺激物 )可能是有害的. 对皮肤非腐蚀性, 非渗透性.Fumes and/or dusts produced by this product may be hazardous in case of ingestion,of inhalation.This product may be hazardous in case of skin contact(irritant,sensitizer),of eye contact(irritant).Non-corrosive for skin.Non-permeator by skin.曝露过度所造成的重大医学疾病对于毒性物质反覆的曝露可能累积毒物在一个或多个人体器官,Medical Conditions Aggravated by 造成健康的恶化.Overexposure Repeated exposure to toxic material may produce general deteriorationof health by an accumulation in one or many human organs.曝露过度 / 症状/ 征状无法提供.Overexposure/ Signs/ SymptomsNot available.警告 !WARNING !Avoid contact with eyes. DO NOT ingest. Do not breathe dust. Avoid prolonged or repeated contact with skin. Keep container closed. Use olny 吸入. 吞食. Inhalation. Ingestion.固体Solid. ( Paste. )详见毒物资料 ( 第11点说明 )See Toxicological Informaiton ( Section 11 )4急救措施 First Aid Measures眼睛接触检查并移除任何隐形眼镜. 如果发生任何接触, 马上用大量清水Eye Contact冲洗眼睛至少15分钟. 立即就医.Check for and remove any contact lenses.In case of contact,immediatelyflush eyes with plenty of water for at least 15 minutes.Get medical attention.皮肤接触假如发生接触, 在移除受污染的衣物和鞋子时, 马上用大量清水冲Skin Contact洗皮肤至少15分钟. 用润肤剂覆盖发炎的皮肤. 衣服及鞋子如要再使用时, 应彻底清洗干净. 马上就医.In case of contact,immediately flush skin with plenty of water for at least15 minutes while removing contaminated clothing and shoes.Cover theirritated skin with an emollient.Wash clothing before reuse.Thoroughlyclean shoes before reuse.Get medical attention.有害物质的皮肤接触用消毒肥皂清洗,并用抗菌药膏覆盖于受污染的皮肤.马上就医.Hazardous Skin Contact Wash with a disinfectant soap and cover the contaminated skin with ananti-bacterial cream.Seek immediate attention.吸入如果吸入, 移至新鲜空气处, 如果不能呼吸, 施予人工呼吸.Inhalation假如呼吸困难, 给予氧气. 马上就医.If inhaled,remove to fresh air.If not breathing,give artificial respiration.Ifbreathing is difficult,give oxygen.Give medical attention immediately.有害物质的吸入无法提供.Hazardous Inhalation Not available.吞食假如吞食, 不可催吐, 除非经过医疗人员指导. 千万不可给意识不Ingestion清者吞食任何物品. 松开紧贴的衣物, 如衣领, 领带,皮带或腰带等.马上就医.If swallowed,do not induce vomiting unless directed to do so by medicalpersonnel.Never give anything by mouth to an unconscious person.Loosen tight clothing such as a collar,tie,belt or waistband.Get medicalattention immediately.有害物质的吞食无法提供.Hazardous Ingestion Not available.医师的建议无法提供.Notes to Physician Not available.5火警的措施 Fire Fighting Measures产品的易燃性在高温时, 可能是可燃的Flammability of the ProductMay be combustible at high temperature.自燃温度无法提供Auto-Ignition TemperatureNot available.闪火点Flash points易燃的极限无法提供Flammable LimitsNot available.产品的燃烧这些产物是碳氧化物 ( 一氧化碳, 二氧化碳 ), 氮氧化物Products of Combustion( 一氧化氮, 二氧化氮 ). 一些金属氧化物.These products are carbon oxides ( CO, CO 2 ),nitrogen oxides (NO,NO 2…).Some metallic oxides.呈现于各种物质下的火灾危害在开放性的火焰火花的情况下是可燃的. 在撞击, 热, 氧化物质,Fire Hazards in Presence of 还原物质, 可燃物质, 有机物质, 金属, 酸, 硷, 潮湿的情况下是Various Substances不可燃的.Combustible in presence of open flames and sparks.Non-flammable in presence of shocks,of heat,of oxidizing materials,of reducing materials,of combustible materials,of organic materials,of metals,of acids,of alkalis,of moisture.呈现于各种物质下的爆炸危害在开放的火焰火花, 撞击下, 不会有爆炸的情形发生.Explosion Hazards in Presence Non-explosive in presence of open flames and sparks,of shocks.of Various Substances火警的媒介与指示小火: 使用干粉灭火器Fire Fighting Media and Instruction 大火: 使用水雾或泡沫喷洒. 不要使用水喷射.SMALL FIRE: Use DRY chemical powder.LARGE FIRE: Use water spray, fog or foam.DO NOT use water jet.防护衣 ( 火 )确认使用一个经过认可/证明的口罩或是相等物.Protective Clothing ( Fire )Be sure to use an approved/certified respirator or equivalent.火灾危害的特殊注解大量金属是不易燃的. 粉尘及粉末可能是可燃的.Special Remarks on Fire HazardsMassive metal is nonflammable.Dust and powders may be flammable.(Tin)爆炸危害的特殊注解无法提供Special Remarks on Explosion Haza No available.已知最低的温度为摄氏200度 ( 松香)The lowest known value is 220℃.(Rosin)6避免意外的措施 Accidental Release Measures小量的溢出与泄漏使用适当的工具来放置溢出的固体于合宜的废弃物处理容器中.Small Spill and Leak喷洒水于在受污染的表面完成清洁,并且根据地方当局的要求处理.Use appropriate tools to put the spilled solid in a convenient wastedisposal container.Finish cleaning by spreading water on thecontaminated surface and dispose of according to local and regionalauthority requirements.大量的溢出和泄漏假如发生产品的溢出或泄漏, 我们的资料显示没有额外的资讯Large Spill and Leak Our data base contains no additional information in case of a spilland/or a leak of the product.7操作与储藏 Handling and Storage操作避免与眼睛接触. 严禁吞食. 严禁吸入粉尘. 避免过长或Handling反覆的皮肤接触. 保持容器紧闭 . 在通风良好的情况下操作.使用后彻底洗净.Avoid contact with eyes. DO NOT ingest.DO not breathe dust. Avoidprolonged or repeated contact with skin.Keep container e onlywith adequate ventilation.Wash thoroughly after handing.储藏保持容器紧密关闭. 保持容器于一个凉爽, 通风良好的区域.Storage Keep container tightly closed.Keep container in a cool,well-ventilated area.8曝露的控制,个人的保护措施 Exposure Controls,Personal Protection工程上的保护使用围住制程区域, 区域排气通风良好, 或其他工程上的控制来维Engineering Controls持空气中的水平在建议爆炸范围之下. 假如使用者操作过程产生烟, 尘或雾, 使用通风良好的设备来维持空气中污染的爆炸性低于爆炸界线.Use process enclosures, local exhaust ventilation, or other engineeringcontrols to keep airborne levels below recommended exposure limits.If user operations generate dust, fume or mist, use ventilation to keepexposure to airborne contaminants below the exposure limit.个人安全的保护眼睛 Eyes护目镜 Splash goggles.Personal Protection身体 Body实验室外套 Lab coat.呼吸防尘口罩. 确认使用经过一个认可/证明的口罩或是相等物.当流通的空气不足时, 请穿戴适当的口罩.Respiratory Dust respirator.Be sure to use an approved/certified respirator orequivalent.Wear appropriate respirator when ventilation is inadequate.手Hands手套 Gloves.脚Feet不适用 Not applicable注解: 建议穿上保护的衣物在特定过程中可能是不足够的. 使用前麻烦先谘询专家.*Note: Suggested protective clothing may not be adequate for a specific process.Consult a specialist before using.假如发生大量溢出时的个人安全保没有额外的资讯Personal Protection in Case No additional information.of a Large Spill产品名称 Product Name曝露极限Exposure Limits(1)锡 Tin TWA:2 (mg/m3 )(2)银 Silver TWA: 0.01(mg/m3 )(3)铜 Copper TWA: 0.2(mg/m3 )谘询地方当局的专家, 可接受的曝露范围.Consult local authorities for acceptable exposure limits.9化学与物理特性 Physical and Chemical Properties物理状态与外观 Physical State and Appearance固态Solid. (Paste.)分子量 Molecular Weight不适用 Not applicable.化学式 Chemical Formula不适用 Not applicable.酸硷值 pH (1% Soln/ Water )不适用 Not applicable.酸价 Acid Value无法提供 Not available.沸点/ 凝结点 Boiling/ Condensation Point无法提供 Not available.熔点 Melting摄氏227度 227℃临界温度 Critical Temperature无法提供 Not available.蒸气压 Vapor Pressure不适用 Not applicable.蒸气密度 Vapor Density无法提供 Not available.挥发度 Volatility无法提供 Not available.初味 Odor Threshold无法提供 Not available.气味 Odor松香特有的气味 Typical rosin.味觉 Taste不适用 Not applicable.颜色 Color深灰色 Dark grey.比重 Specific Gravity7.30 ( 水=1 ) 7.30 ( water=1 )蒸发速度 Evaporation Rate无法提供 Not available.挥发溶剂的有机化合物 VOC无法提供 Not available.LogK ow这个产品在水中及油中是不溶解的The product is insoluble in water and oil.电解度 Ionicity ( in water )非离子 Non-ionic.分散特性 Dispersion Properties在冷水, 热水, n-辛醇, 丙酮中无法被分离.Is not dispersed in cold water, hot water, n-octanol, acetone.溶解性Solubility在甲醇,乙醚微溶. 在冷水,热水,丙酮中不溶.Very slightly soluble in methanol, diethyl ether.Insoluble in cold water, hot water, n-octanol, acetone.无法提供 Not available.物理化学的注解 Physical Chemical Comments10稳定性与反应特性 Stability and Reactivity稳定性与反应特性这个产品是稳定的.Stability and Reactivity The product is stable.不稳定的状态正常情况下是稳定的.超过熔点, 会散发出有毒的锡氧化物 ( 锡 ).Conditions of Instability Stable in normal conditions. Over melting point, will emit toxic tin oxides.(Tin 各种物质的不相容性对酸有强烈的反应.对氧化剂,溼度有轻微的反应.Incompatibility with Highly reactive with acids.Slightly reactive with oxidizing agents, moisture.Various Substances危害的聚合作用不会发生Hazardous Polymerization Will not occur.腐蚀性对玻璃, 钢, 铝, 锌, 不锈钢( 304 ), 不锈钢( 316 ).Corrosivity Non-corrosive in presence of glass , of steel , of aluminum , of zinc , of stainlesssteel(304),of stainless steel(316) .对腐蚀性的特殊注解在锡膏中的有机助焊剂主要任务是清洁(移除及预防氧化)銲锡表面.Special Remarks on The organic medium in a paste has task of cleaning ( removing and preventingCorrosivity oxydation )the surface for soldering.11毒物资料 Toxicological Information对人类的毒性及慢性影响这个产品所产生的烟及尘, 假如发生吞食或是吸入时, 可能会造成Toxic and Chronic危害. 假如发生皮肤接触 (刺激物, 致敏物质) , 眼睛接触 (刺激物)Effects on Humans对皮肤为非腐蚀性, 也不会有渗透性.Fumes and/or dusts produced by this product may be hazardous in case ofingestion, of inhalation. This product may be hazardous in case of skin contact( irritant, sensitizer ), of eye contact ( irritant ). Non-corrosive for skin. Non-permeator by skin.毒性的发展: 没有毒性DEVELOPMENTAL TOXICITY:Not toxic.这产品对肺脏, 黏膜, 上呼吸道, 皮肤, 眼睛, 眼球, 角膜, 甲状腺可能有毒性.反覆或是过长的曝露于这种物质下可能造成特定器官的损害. 反覆的曝露于毒性的物质下可能累积毒物在一个或多个人体器官,造成健康的恶化.The product may be toxic to lungs,mucous membranes,upper respiratory tract,skin,eye,lens or cornea,thyroid. Repeated or prolonged exposure to the substancecan produce target organs damage.Repeated exposure to toxic material may producegeneral deterioration of health by an accumulation in one or many human organs.对动物的毒物性关于动物的毒性,在我们的资料中没有特殊的报告.Toxicity to Animals No specific information is available in our data base regarding the toxicity to animals.对人类慢性影响的过长或反覆的曝露于氧化锡的烟雾中可能导致肺尘病 (锡).特殊注解Prolonged and repeated exposure to tin oxyde fumes may result in pneumoconiosis Special Remarks on (stannosis).Chronic Effects on Humans对人类其他毒物影响如果在高温时吸入烟或尘可能会导致气喘反应.的特殊注解融熔金属可能造成严重的烧伤.Special Remarks on Inhalation of smoke and fumes , at hight temperatures , may cause an asthmaticOther Toxic Effects reaction in some individuals.on Humans MOLTEN METAL can cause sever BURNS!毒性对动物的特殊注解没有额外的注解 ( 锡 )Special Remarks on No additional remark. (Tin)Toxicity to Animals12生态资料 Ecological Information环境毒性 Ecotoxicity无法提供 Not available.生化需氧量 BOD5 and COD无法提供 Not available.生物分解性 Biodegradable/ OECD无法提供 Not available.流动性 Mobility无法提供 Not available.产品的生物分解的毒性产品品质的下降比产品本身较具有毒性.Toxicity of the Products of The products of degradation are less toxic than theBiodegradation product itself.对产品生物分解的特殊注解无法提供.Special Remarks on the Not available.Products of Biodegradation13废弃物处置办法 Disposal Considerations废弃物资讯废弃物的处理需要符合当地政府的控制规定.Waste Information Waste must be disposed of in accordance with local environmental control regulations.废弃物流向无法提供Waste Stream Not available.谘询当地或所属地区专家Consult your local or regional authorities.14运送资料 Transport Information运输部分类不是一个DOT控制的物料 ( 美国 )DOT Classification Not a DOT controlled material ( United States ).运输特别条款不适用Special Provisions for Transport Not applicable.IMO/ IMDG分类不在IMDG的规定下IMO/ IMDG Classification Not controlled under IMDG海运的污染 Marine Pollutant无法提供 Not available.ADR/ RID 分类不在ADR的规定之下 ( 欧洲 )ADR/ RID Classification Not controlled under ADR ( Europe )国际民航组织 /国际空运协会分类不在国际空运协会规定下ICAO/ IATA Classification Not controlled under IATA15管理资讯 Regulatory InformationHCS 分类等级: 刺激物质 Class: Irritating substance.HCS Classification等级: 敏感性物质 Class: Sensitizing substance.等级: 特定器官影响 Class: Target organ effects.International Regulations 国际性管理EINECS Not available.DSCL ( EEC )21/22- 接触到皮肤或是吞下的可能是有害的36/38- 刺激眼睛及皮肤42-43- 经吞食或是皮肤接触能导致过敏作用.21/22-Harmful in contact with skin and if swallowed.36/38-Irritating to eyes and skin.42/43-May cause sensitization by inhalation and skin contact.国际名册International Lis澳大利亚Australia(NICNAS): 所有成分All components.韩国Korea(TCCL): 所有成分All components.菲律宾 Philippines(RA6969): 所有成分All components.16其他资料 Other Information。

无铅锡棒SN100C产品SDS 模板

无铅锡棒SN100C产品SDS 模板

1.1 Product Details:Product Name Product Code Product Use1.2 Company's Identification:Supplier's Name Address : SOLDER BAR - SN100C/SN100CL : SN100C/SN100CL: Solder for electrical or electronic application: : Telephone FacsimileEmergency Telephone NumberSupplier's Name Address : : :: :Telephone FacsimileEmergency Telephone NumberSupplier's Name Address Telephone FacsimileEmergency Telephone NumberGHS CLASSIFICATION Skin Sensitisation : Category 1Carcinogenicity: Category 2Specific Target Organ Toxicity : Category 1after Repeated Exposure (STOT)SAFETY DATA SHEETLABEL SYMBOLPictogramNickel containing productsSignal Word: DangerHazard Statement: Physical :H317 : May cause an allergic skin reactionH351 : Suspected of causing cancerH372 : Cause damage to organs through prolongedor repeated exposurePrecautionary StatementsPrevention: P201 : Obtain special instructions before useP202 : Do not handle until all safety precautions have been readand understoodP260 : Do not breathe dust/fume/gas/mist/vapours/sprayP261 : Avoid breathing fumes during solderingP264 : Wash hand thoroughly after handlingP270 : Do not eat, drink or smoke during solderingP272 : Contaminated work clothing should not be allowed out ofthe workplaceP280 : Wear protective gloves and eye / face protectionP281 : Use personal protection equipment as requiredResponse: P302 + P352: IF ON SKIN during soldering: Wash with plenty ofsoap and water.P304 + P340 : IF INHALED: Remove person to fresh air and keepcomfortable for breathingP305 + P351 : IF IN EYES during soldering : Rinse cautiouslywith water for several minutes.P308 + P313: IF exposed or if you feel unwell: Call a POISONCENTER or doctor/ physicianP333 + P313: If skin irritation or rash occurs: Get medicaladvice/ attentionP314 : Get medical advice/attention if you feel unwellP321: Specific treatmentP362 + P364 : Take off contaminated clothing and wash it before reuseP363: Wash contaminated clothing before reuseStorage: P402+P403: Store in a well-ventilated, dry place.P405 : Store locked upDisposal: P501 : Dispose of contents and container in accordance with localregulationsOther hazard informationHot solder can burn eyes and skin. Fumes during soldering are irritating to eyes and may causeheadache and respiratory system irritation or damage.EYE CONTACT: Promptly flush with a large amount of water for at least 15 minutes.Seek immediate medical attention.SKIN CONTACT: Promptly wash with soap and water and rinse thoroughly . Remove contaminated clothing launder before reuse . If irritation persist, consult a physician.INHALATION: Remove to fresh air. Restore breathing if necessary. If irritation persist, consult a physician.INGESTION: Seek immediate medical attention. Never give anything by mouth to an unconscious person.Extinguishing Media: Carbon Dioxide, dry chemical (Note : Do not use water on molten alloy.)Fire Fighting Instruction: Wear self-contained breathing apparatus and full protective clothing.Leak/ Spill: Place into properly labeled waste container and sent for disposal according to Federal, State and local regulations.Handling: This product is for industrial use only. Wash hands after use. Avoid contact with eyes, skin and clothing. Avoid inhalation ofsoldering fumes during process. Do not take internally. Keep out of reach of children. Observe good industrial practices.Storage: Store in a well – ventilated, dry area in ambient temperature.PEL (Tin): 2 mg/m3TLV (Tin): 2 mg/m 3PEL (Copper): 0.1 mg/m 3TLV (Copper): 0.2 mg/m 3PEL (Nickel): 1 mg/m3TLV (Nickel): 1 mg/m 3PEL (Germanium): NE TLV (Germanium): NEDOC CATEGORY:3The Master Distributor of FCT Asia Pte LimitedSDS - SN100C/SN100CL - 15042019 - REV.A - Page 3 of 7Engineering Controls: Use general or local ventilation to keep exposure level below exposurelimit.PERSONAL PROTECTIVE EQUIPMENTRespiratory: Use respirable fume respirator or air supplied respirator whensoldering in confined space or where local exhaust or ventilationdoes not keep exposure below TLV.Eye: Wear approved safety glasses or goggles with unperforatedsideshields. Wear equipment appropriate for soldering operation.Skin: Wear chemically impervious gloves. Wear equipment appropriate forsoldering.Other: An emergency eyewash station should be available in case ofaccidental eye contact.Physical State at 20ºC: SolidBoiling Point (760 mm Hg): NAºF NAºCFlash point: Non-flammableVapor Pressure (mm Hg at 20ºC): NDLower Explosive Limit: NAUpper Explosive Limit: NAAuto-ignition Temperature: Massive alloy is non-flammable. Brazing flames can ignitecombustibles. Finely divided dust may form explosive mixtures withair.Vapor Density (air=1): NASolubility in water (% by weight): 0pH: NAFreezing Point(760 mm Hg): NAAppearance and Odor: Silver-gray metal, no odorSpecific Gravity (water=1 at 25ºC): ~7.4Melting Point: 227ºCEvaporation Rate (butyl acetate=1): NAPercent Volatile (by volume): 0%Volatile Organic Compound (VOC): NA g/LitreOdor Threshold: NECoefficient of water / Oil Distribution: NEStability: StableHazardous Polymerization: Will not occurCondition to Avoid: Moisture , excessive heat during storage.Incompatibility: Strong acids and alkalis, oxidizing agents.Hazardous Decomposition Products: Carbon Dioxide,Carbon Monoxide,Metal Oxide.Exposure Limits: See Section 8 for ingredients.Keep out of waterway.Waste Disposal Method: Waste / Solder can be reclaimed.Disposal waste residues in accordance with all Federal, State and Local Regulations regarding pollutionand waste disposal.DOT Shipping Data: Not RegulatedCanadian TDG: Not RegulatedMaterial is hazardous as defined by Specification for Hazardous communication for hazardous chemicals and dangerous goods (Singapore Standard SS586) Part 2:2008, (Malaysia Standard) MS1804:2008 and (China Standard) GB 13690-2009 - Globally harmonised system of classification and labelling of chemicals. Complies with the following national/regional chemical inventory requirements:TSCA (USA)EINECS (EU)IECSC (China)Workplace Safety and Health Act & Workplace Safety and Health (General Provisions) RegulationsMPA (Dangerous Goods, Petroleum and Explosives) RegulationsFire Safety Act & Fire Safety (Petroleum and Flammable Materials) RegulationsGHS CLASSIFICATIONSkin Sensitisation: Category 1Carcinogenicity: Category 2Specific Target Organ Toxicity: Category 1after Repeated Exposure (STOT)LABEL SYMBOLPictogramNickel containing productsSignal Word: DangerHazard Statement: Physical :H317 : May cause an allergic skin reactionH351 : Suspected of causing cancerH372 : Cause damage to organs through prolongedor repeated exposurePrecautionary StatementsPrevention: P201 : Obtain special instructions before useP202 : Do not handle until all safety precautions have been readand understoodP260 : Do not breathe dust/fume/gas/mist/vapours/sprayP261 : Avoid breathing fumes during solderingP264 : Wash hand thoroughly after handlingP270 : Do not eat, drink or smoke during solderingP272 : Contaminated work clothing should not be allowed out ofthe workplaceP280 : Wear protective gloves and eye / face protectionP281 : Use personal protection equipment as requiredResponse: P302 + P352: IF ON SKIN during soldering: Wash with plenty ofsoap and water.P304 + P340 : IF INHALED: Remove person to fresh air and keepcomfortable for breathingP305 + P351 : IF IN EYES during soldering : Rinse cautiouslywith water for several minutes.P308 + P313: IF exposed or if you feel unwell: Call a POISONCENTER or doctor/ physicianP333 + P313: If skin irritation or rash occurs: Get medicaladvice/ attentionP314 : Get medical advice/attention if you feel unwellP321: Specific treatmentP362 + P364 : Take off contaminated clothing and wash it before reuseP363: Wash contaminated clothing before reuseStorage: P402+P403: Store in a well-ventilated, dry place.P405 : Store locked upDisposal: P501 : Dispose of contents and container in accordance with localregulationsOther hazard informationHot solder can burn eyes and skin. Fumes during soldering are irritating to eyes and may causeheadache and respiratory system irritation or damage.Distribution: The information in this document should be made available to allwho may handle the product.THIS SAFETY DATA SHEET CONTAINS THE FOLLOWING REVISIONS:Updates made in accordance with implementation of GHS requirements.Revision No.: Rev. ARevision Date: 15 APR 2019The information contained herein is based on data considered accurate and is offered solely for information, consideration and investigation.Electroloy extends no warranties, makes no representation and assumes no responsibility as to the accuracy, completeness or suitability of this data for any purchaser’s use .The data on this SafetyData Sheet relates only to this product and does not relate to use with any other material or in any process. All chemical products should be used only by or under the direction of technically qualified personnel who are aware of the hazards involved and the necessity for reasonable care in handling. Hazard communication regulations require that employees must be trained how to use a Safety Data Sheet as a source ofHazard information.NE = Not EstablishedNA = Not Applicable。

锡条化学品物质安全资料表 (MSDS)

锡条化学品物质安全资料表 (MSDS)
化学品物质安全资料表
NO.:
供 应 商 资 料
物料名称
锡条
供应/制造商名称
XX金属
供应/制造商地址
咨询者姓名
电话
传真
物 理 及 化 学 特 性




[ ]糊状物 [ ]粉末
[√]固体 [ ]液体 [ ]气体
PH值
外观
固体
气味

化学成份
Sn
火 灾 及 爆 炸 危 害 资 料
测试方式
[ ]开桶 [ ]闭桶




爆炸上限:V0.1﹪
闪火点

爆炸下限:V0.1﹪
自然温度



灭火材料:注水 粉末消火剂 泡消火剂炭酸气
特殊灭火程序:通常的灭火方法
反 应 特 性
稳定性
[√]稳定性 [ ]不稳定
应避免之状况:
危害之聚合
[ ]可能发生 [ ]不会发生
应避免之状况:
不相容性
应避免之物质:
危害分解物
其它
化学品物质安全资料表
误饮的情况下:漱口、吐出、就医
暴 露 预 防 措 施
个人防护
设 备
眼 部
保护眼镜(需要采用)
呼 吸
口罩、呼吸用保护具(必要时采用)
手 套
保护衣(必要时采用)
其 它
保护手袋(需要采用)
通风设备
操作与储存
注意事项
在干燥通风的室内保存
在室内贮藏处贮藏,防止盗窃最好锁上
个人卫生
使用后请尽快认真洗手漱口,作业服不要带回家
关于废弃方法请依照产业废弃物物理方法的顺序委托产业废弃处理业者

Sn100纯锡无铅高温焊锡条产品规格书

Sn100纯锡无铅高温焊锡条产品规格书

无铅高温焊锡条产品规格书适用范围:1.该资料只适用于本公司的指定产品:无铅高温焊锡条Sn-100。

2.本产品应用于焊接高温要求的产品,由高纯度原材料精制而成,在环保型电子装配工业中广泛应用,产品执行标准:GB/T20422-2006产品信息:1.名称:无铅高温焊锡条2.合金成分:Sn-1003.产品形状:条状合金成分:成分Sn Cu Fe Pb Ag Ni Zn含量(%)余量0.050.020.100.10.010.001成分Bi Cd In Au Al As Sb含量(%)0.10.0020.10.050.0010.030.1注明:A.表中的数值均为最大值;B.表中数据来源于本公司化验室采用进口ICP发射光谱仪随机抽样值,因批次不同,数据略有不同;C.表中的“余量”表示100%与其它元素含量总和的差值。

材料特性:规格熔点(℃)抗拉强度/Mpa延展率(%)工作温度(℃)Sn10023214.555285-450产品特点:●环保产品,不污染环境;流动性佳,焊点饱满光亮;●焊接密集型线路板,性能优越,可靠性强;●添加高效抗氧化成分,抗氧化能力强;●锡渣少,降低能耗,减少不必要的浪费;●适用于波峰焊或手浸焊接。

使用方法:1.锡条的添加:在波峰焊接过程中,锡的含铜量会不断增加,当增加到一定程度时,应及时添加Sn-100高温锡条,以降低锡中的含铜量,保障电子产品的焊接品质。

2.浮渣的清除:浮渣是形成于焊锡表面的氧化物,其产生的速率是由温度和对锡液的搅动而定的,温度越高及对锡液表面的搅动越大,形成的浮渣越多。

可添加抗氧化剂于锡液表面,形成一层保护膜以减少锡的氧化。

锡液表面的浮渣可防止焊锡再氧化,因此不必经常清除锡渣,只要不影响锡液的流动,一般每天清理一次就可以。

在清理锡渣时,不要将夹杂在灰渣中的焊锡一起带出,应只捞取灰色粉状的锡渣。

3.焊锡的更换:在焊锡使用过程中,Sn会与PCB板及电子元器件引脚或焊盘中的Cu生成金属间化合物Cu6Sn5,该化合物的熔点在500℃以上,因此它以固体形式存在,这种金属间化合物的过多存在将严重影响焊接质量,因此应定期检测锡炉中的焊锡成分,当发现Cu及Pb接近最高允许标准时,应及时更换焊锡。

无铅锡线MSDS数据表—双智利

无铅锡线MSDS数据表—双智利

固体(药芯焊锡丝)
高温焊料可能灼伤眼睛和皮肤。焊接过程中所产生烟雾对眼 睛和呼吸系统会产生刺激作用,并可能出现头疼特征。与松 香烟雾长期接触则可能出现过敏反应。
⊙ 皮肤
○ 食入
⊙ 吸入
⊙ 眼睛
影响对象
Байду номын сангаас
眼睛、黏膜、呼吸系统。
潜在的健康效应(短期接触)
吸入
使用过程中助焊剂所产生的烟雾可能影响黏膜及呼吸系统。
0.1
0.2
不详
改性松香 65997-05-9 < 3
不详
不详
不详
CAS: 化学文摘索引;OSHA: 美国职业安全和健康署;PEL: 允许暴露限度;TLV: 阀
极限值;
TWA: 时间积累平均值;STEL: 短期暴露极限值。
3. 危险警告,识别标记 HAZARDS IDENTIFICATION
外观 紧急情况综述 主要途径
5. 消防措施 FIRE FIGHTING MEASURES
可燃性 ○ Yes ⊙ No
应避免条件

闪点
不详
自燃温度
不详
燃烧极限
不详
灭火介质
○ 水 ○ 二氧化碳 ○ 泡沫 ○ 灭火干粉
危险的燃烧产物
二氧化碳、一氧化碳。
爆炸可能性
加热、冲击、火花、明火条件下一般不会产生爆炸。
常态分解可能性
○ Yes
灭火指示
9. 物理与化学性质 PHYSICAL AND CHEMICAL PROPERTIES
外观(20 °C)
沸点 (760 mm Hg)
蒸 发 压 (mm Hg at 20 °C) 蒸气密度 (air = 1)
水 中 溶 解 度 (% by weight) PH

无铅焊锡膏物质安全资料表MSDS 范本

无铅焊锡膏物质安全资料表MSDS 范本

7440-50-8 铜(依据《工作场所有害因素职业接触限值》GBZ2-2002)
职业接触限值 最高容许浓度MAC :无
/OEL(按铜 时间加权平均容许浓度PC-TWA:铜尘 1mg/m3 铜烟0.2mg/m3
计)
短时间接触容许浓度PC-STEL:铜尘 2.5mg/m3 铜烟0.6mg/m3
7440-31-6 锡
二乙二醇单己醚 改性松香
CAS 7440-31-5 7440-22-4 7440-50-8 112-59-4 65997-60-0
附加信息: 锡粉一般占锡膏组分的 85%-92%。
3 危险性概述
危害描述: 通过食入、吸入和皮肤接触可能引起过敏。
含量 % 80-90 <4.0
<1 3.0-5.0 3.0-5.0
眼睛: 焊接时的烟雾会刺激眼睛。
过敏性:
吸入可能引起过敏。
皮肤接触可能引起过敏。
第4页 共5页
12 生态信息
总括要点: 不要让该产品接触地表面、水道或污水系统。
13 处置考虑
产品
建议: 不可与生活垃圾一起处置。 不许产品接触污水系统。 须按官方法规处置。
不洁的包装材料:
建议:须按政府相关法规处置。
远离食品、饮料和饲料。 立即脱去沾湿的或被污染的衣服。 在休息之前和工作完毕时洗手。 分开储存防护衣服。 呼吸设备: 当通风不畅,不足以排除呼吸区域的烟雾时,为安全起见,应佩戴经安全认可 的防毒面具或自供氧呼吸装置。
手部防护:使用手套
眼部防护:使用安全眼镜
第3页 共5页
9 化学和物理性能
形态: 颜色: 气味: 熔点/熔化范围: 沸点/沸腾范围: 闪点 自燃点 爆炸危险: 20℃ 密度: 在水中的溶解度和掺杂度:

物质安全资料表(MSDS)模板

物质安全资料表(MSDS)模板
物质安全资料表(MSDS)
一、物品与厂商资料 1.物品名称 2.制造商或供货商名称地址 3.联络电话/传真电话 4.联络人/电话 二、成分辨识资料 产品总质量/pcs 成分/组成信息 含有物质
CAS NO.
含有量(mg)
含有率(%)
三、危险性描述 1.最重要危害与效应 健康危害效应 物理及化学危害 环境影响 特殊危害 食入性危 2.物品危害类别说明或图示:
四、急救措施 1.不同暴露途径之急救方法: 吸入
皮肤接触
眼睛接触
食入
2.最重要症状及危害效应: 3.对急救人员之防护: 4.对医师之提示: 五、灭火措施 灭火防护:
物质安全资料表(MSDS)
灭火器具: 灭火危害: 火灾闪火点: 六、危害物意外倾泄 处理方法 七、安全处置与储存方法 处置 储存 八、安全处置与储存方法 工程控制 眼脸防护 皮肤防护 通风预防 九、物理及化学性质 物质状态 比重密度 颜色气味 沸点 融点 挥发点 溶解度 Ph 酸碱值 十、安定性及反应性 安定性 分解活动性 避免渗入物 十一、毒性资料 吸入性伤害 对皮肤伤害 食入性伤害 眼睛过敏度 十二、环境影响 环境影响 十三、废弃处置方法 位 备注
制表人
制表日期

SN100C、SN100Ce无铅锡棒物质安全数据表

SN100C、SN100Ce无铅锡棒物质安全数据表

1.1 产品说明:产品名称: 无铅锡棒 - SN100C - SN100CeSN100CL - SN100CLe 产品编号: SN100Ce/SN100CLe产品应用: 电子与电器用途中使用的焊料1.2 公司说明:供应商-公司地址联系电话传真电话紧急联系电话供应商-公司地址: :: :: : :联系电话传真电话紧急联系电话供应商-公司地址: : : : :联系电话传真电话紧急联系电话: : :GHS CLASSIFICATION皮肤过敏: 第1类致癌性: 第2类特异性靶器官系统毒性(反复接触): 第1类安全数据表LABEL SYMBOL象形图含镍产品信号词: 危险危险说明: 物理危险H317 : 可能导致皮肤过敏反应H351 : 怀疑会致癌H372 : 长期或重复接触会对器官造成伤害防范说明预防: P201 : 在使用前获取特别指示P202 : 在读懂所有安全防范措施之前切勿搬动P260 : 不要吸入粉尘/烟/气体/烟雾/蒸汽/喷雾P261 : 避免吸入粉尘/烟/气体/烟雾/蒸汽/喷雾P264 : 作业后彻底清洗双手P270 : 使用本产品时不要进食、饮水或吸烟P271 : 只能在室外或通风良好之处使用P272 : 受沾染的工作服不得带出工作场地P280 : 戴防护手套/穿防护服/戴防护眼罩/戴防护面具P281 : 使用所需的个人防护设备Response: P302 + P352 : 如皮肤沾染: 用大量肥皂和水清洗P304 + P340 : 如误吸入: 将受害人转移到空气新鲜处,保持呼吸舒适的休息姿势P305 + P351 : 如进入眼睛:用水小心冲洗几分钟P308 + P313 : 如接触到或有疑虑:求医/就诊P333 + P313 : 如发生皮肤刺激或皮疹: 求医/就诊P314 : 如感觉不适,须求医/就诊P321 : 具体治疗(见本标签上的方法)P362 + P364 : 脱掉沾染的衣服,清洗后方可重新使用P363 : 沾染的衣服清洗后方可重新使用贮存防范: P402+P403 : 存放于干燥处;存放在通风良好的地方P405 : 存放处须加锁处置防范: P501 : 按照地方规章处置内装物/容器其它危险信息热焊料可灼伤眼睛和皮肤。

物质安全资料表(MSDS)

物质安全资料表(MSDS)

化工安全概論
第五欄: 滅火措施
內容包括: (a) 適用滅火器: for NH3, 小火 – 化學乾粉,二氧化碳; 大火 – 噴水,水霧,泡沫 (b) 滅火時可能遭遇之特殊危害: e.g. 火場中壓力容器可 能破裂爆炸 (c) 特殊滅火程序: (d) 消防人員之特殊防護裝備: e.g. 必須配戴A級氣密是 化學防護衣及空氣呼吸器
化工安全概論
資訊的分類(2)
3. 如何預防危害事故發生 * 第七欄位: 安全處置與儲存方法 * 第八欄位: 曝露預防措施 * 第九欄位: 物理及化學性質 * 第十欄位: 安定性及反應性 4. 其他有用的資訊 * 第十一欄位: 毒性資料 * 第十二欄位: 生態資料 * 第十三欄位: 廢棄處置方法 * 第十四欄位: 運送資料 * 第十五欄位: 法規資料 * 第十六欄位: 其他資料
化工安全概論
第十一欄: 毒性資料(Toxicity)
•內容包括: 急毒性,局部效應,致敏感性,慢性毒性或 長期毒性,特殊效應等。 •包括: LD50, LC50 等資訊
•以氨為例: 急毒性 – 吸入會嚴重刺激呼吸道,20-25 ppm 會開始有感覺,短時間曝露於1500ppm以上會造成致命 的肺水腫; LC50 = 4837 ppm (大鼠,吸入); 慢毒性方面 – 反覆曝露數週後,可能對氨的刺激產生耐受性; 每天曝露 於97-122 ppm 會刺激眼睛及上呼吸道
化工安全概論
危害通識計畫
•屬於配合性措施,並非強制性規定 •計畫書並無特定格式,但以簡潔清晰,段落分明,易於 修訂為原則 •建議內容包括以下六點: 政策,責任,危害物質清單,標 示,物質安全資料表,教育訓練 (將工作事項,負責的人, 一一清楚列出)
化工安全概論
危害物質清單(Inventory list of hazardous materials)

Sn100纯锡无铅高温焊锡条物质安全材料规格表MSDS

Sn100纯锡无铅高温焊锡条物质安全材料规格表MSDS

物质安全材料规格表一、制造或供应商资料:制造厂商名称:联系电话:制造厂商地址:联系传真:产品型号:无铅高温焊锡条Sn-100/二、供应物料名称及主要成份资料:物料名称:无铅高温焊锡条危害物质成份成份百分比危害物质分类锡(Sn)99.9±0.1%第九类—其它危害物三、相关危害状况资料:健康危害配合助焊剂使用时,产生的高浓度蒸汽可能会使人头晕,恶心,对眼睛和呼吸系统有一定刺激性。

安全危害配合助焊剂使用时可形成易燃挥发性空气混合物。

四、急救方法:吸入急救吸入蒸汽应到空气新鲜处或寻求医疗救护。

皮肤接触高温熔融时会对皮肤造成烫伤,烫伤用冷水降温后或皮肤过敏时应请医生处理。

误服急救尽快寻求医疗救助。

眼睛急救用大量清水清洗或进行医疗救治。

五、个人防护:身体防护穿工作服,戴手套,穿耐化学腐蚀的安全鞋。

眼睛防护戴防护眼睛。

呼吸防护通风不好时,戴口罩。

六、灭火措施:适用灭火剂二氧化碳、化学干粉、泡沫灭火器、水。

灭火注意事项灭火时可能碰到的特殊状况:熔融之合金在高的温度下遇水时可能会产生严重喷溅,可能会造成人员烫伤。

特殊灭火程序空白特殊防护设备灭火人员须穿防火衣和配戴便携式呼吸器七、洩漏处理方法:个人注意事项熔融态的焊料须经冷却到常温后方可处理,避免烫伤。

环境注意事项洩漏物须回收。

清理方法冷却后刮取回收。

八、安全处置与储存方法:处置作业温度不宜高于5000C,人员须配戴防护设备,避免吸入蒸气、粉尘、清扫时不宜使用干扫把及高压气体喷刷,以免粉尘飞扬。

储存储存时须防水、防污染,不要直接放置于地面。

十、安定性及反应性:安定性安定特殊状况下可能之危害(空白)应避免之状况热、火焰、潮湿、浸水应避免之物质强氧化剂、强酸、双氧水危害分解物金属粉尘及蒸气声明:本资料只适用于本公司指定产品,不适用于与其它物质混合使用的情况。

物质安全资料表(MSDS)

物质安全资料表(MSDS)

物质安全资料表(MSDS)Chemicals MSDS去污水主要危害成分:乙醇,丙酮危害警告讯息:1.可燃性液体。

2.入眼会刺激粘膜,对皮肤有刺激性,吸入时会引起喉咙炎症、支气管炎、肺炎、肺气肿等损伤,吞入有危害。

危害防范措施:1.远离热源,严禁烟火,储存在房间阴凉处。

2.强制排风,穿戴适当的防护器具。

3.避免直接接触,一旦误触,立即用大量清水冲洗相关部位,并就医。

应急处理 1.使用干粉、二氧化碳、泡沫灭火器灭火。

2.使用黄沙或棉布等进行泄露处理,禁止使用易产生火星的工具,并佩带个人防护器具。

废弃处理1.废液不得倒入下水道、地面或任何水体,所有废液和沾有该物质的物件都应收集。

2.委托合格的供应商进行废弃处理。

更详细的资料请参考物质安全资料表Chemicals MSDS乙醇主要危害成分:*****H 危害警告讯息:1.易燃,其蒸汽与空气可形成爆炸性混合物,遇明火、高热能引起燃烧爆炸。

2.与氧化剂接触发生化学反应或引起燃烧。

3.在火场中,受热的容器有爆炸危险。

4.其蒸汽比空气重,能在较低处扩散到相当远的地方,遇明火会引起回燃。

危害防范措施:1.储存于阴凉、通风的仓间内,远离火种、热源,温度不宜超过30℃,防止阳光直射,保持容器密封。

2.应与氧化剂分开存放,使用防爆型通风、照明设施,工作时穿戴适当的防护器具。

3.禁止使用易产生火花的机械设备和工具,接地,防止静电积聚。

应急处理 1.使用干粉、二氧化碳、泡沫灭火器灭火。

2.使用黄沙或棉布等进行泄露处理,禁止使用易产生火星的工具,并佩带个人防护器具。

废弃处理 1.废液不得倒入下水道、地面或任何水体,所有废液和沾有该物质的物件都应收集。

2.委托合格的供应商进行废弃处理。

Chemicals MSDS异丙醇主要危害成分:C3H8O 危害警告讯息:1.易燃,其蒸气与空气可形成爆炸性混合物,遇明火、高热能引起燃烧爆炸。

2.与氧化剂接触会猛烈反应,在火场中,受热的容器有爆炸危险。

SN100C锡铜镍锗SnCuNiGe无铅锡条物质安全资料表MSDS

SN100C锡铜镍锗SnCuNiGe无铅锡条物质安全资料表MSDS

1.1 Product Details:Product NameProduct CodeProduct Use 1.2 Company's Identification:Supplier's Name Address : SOLDER BAR - TOP UP ALLOY FOR SN100C - SN100Ce TOP UP ALLOY FOR SN100CL - SN100CLe : SN100Ce/SN100CLe : Solder for electrical or electronic application: :Telephone Facsimile : : (EMERGENCY OVERVIEWHot solder can burn eyes and skin. Fumes during soldering are irritating to eyes and may cause headache and respiratory system irritation or damage.POTENTIAL HEALTH EFFECTS Exposure routes: Inhalation, skin and/or eye contact.EYE CONTACT: May cause irritation of the eyes. SKIN CONTACT: May cause irritation of the skin.INHALATION : Overexposure to vapor or fumes may cause headache, dizziness, nausea & dryness or irritation of nose, throat or eyes. Inhalation of Tin Oxide may lead to benign pneumoconiosis.INGESTION : May be harmful if swallowed. May cause vomiting, nausea, diarrhea.OTHERS: May aggravate existing respiratory, skin and allergic condition.MATERIAL SAFETY DATA SHEETNOTES :-C.A.S : Chemical Abstract ServiceOSHA : Occupational Safety and Health AdministrationPEL : Permissible Exposure LimitACGIH : American Conference of Government Industrial HygienistsTLV : Threshold Limit Value EYE CONTACT: Promptly flush with a large amount of water for at least 15 minutes. Seek immediate medical attention.SKIN CONTACT : Promptly wash with soap and water and rinse thoroughly . Remove contaminated clothing launder before reuse . If irritation persist, consult a physician.INHALATION : Remove to fresh air. Restore breathing if necessary. If irritation persist, consult a physician.INGESTION: Seek immediate medical attention. Never give anything by mouth to an unconscious person.Flash point: Non-flammable Lower Explosive Limit: NA Upper Explosive Limit: NA Auto-ignition Temperature : Massive alloy is non-flammable. Brazing flames can ignite combustibles. Finely divided dust may form explosive mixtures with air.Extinguishing Media : Carbon Dioxide, dry chemical (Note : Do not use water on molten alloy.)Fire Fighting Instruction: Wear self-contained breathing apparatus and full protective clothing.Leak/ Spill : Place into properly labeled waste container and sent for disposal according to Federal, State and local regulations.Handling : This product is for industrial use only. Wash hands after use. Avoid contact with eyes, skin and clothing. Avoid inhalation of soldering fumes during process. Do not take internally. Keep out of reach of children. Observe good industrial practices.Storage: Store in a well – ventilated, dry area in ambient temperature.Engineering Controls : Use general or local ventilation to keep exposure level below exposure limit.PERSONAL PROTECTIVE EQUIPMENTRespiratory: Use respirable fume respirator or air supplied respirator when soldering in confined space or where local exhaust or ventilation does not keep exposure below TLV.Eye: Wear approved safety glasses or goggles with unperforated sideshields. Wear equipment appropriate for soldering operation.Skin: Wear chemically impervious gloves. Wear equipment appropriate for soldering.Other : An emergency eyewash station should be available in case ofaccidental eye contact.Physical State at 20ºC: Solid Boiling Point (760 mm Hg): NAºF NAºCVapor Pressure (mm Hg at 20ºC): ND Vapor Density (air=1): NA Solubility in water (% by weight): 0pH: NA Freezing Point(760 mm Hg): NA Appearance and Odor: Silver-gray metal, no odor Specific Gravity (water=1 at 25ºC): ~7.4Melting Point: 230ºC Evaporation Rate (butyl acetate=1): NA Percent Volatile (by volume): 0%Volatile Organic Compound (VOC): NA g/Litre Odor Threshold: NE Coefficient of water / Oil Distribution : NEStability: Stable Hazardous Polymerization: Will not occur Condition to Avoid: Moisture , excessive heat during storage.Incompatibility: Strong acids and alkalis, oxidizing agents.Hazardous Decomposition Products : Carbon Dioxide,Carbon Monoxide,Metal Oxide.Exposure Limits : See Section 3 for ingredients.Keep out of waterway.Waste Disposal Method : Waste / Solder can be reclaimed.Disposal waste residues in accordance with all Federal, State and Local Regulations regarding pollution and waste disposal.DOT Shipping Data: Not Regulated Canadian TDG : Not RegulatedAll Chemical substances in this product are listed in the EPA (Environment Protection Agency) TSCA (Toxic Substances Control Act) inventory.NFPA Rating :Health : 1Flammability : 0 Reactivity : 0 HMIS Rating :Health : 1 Flammability : 0 Reactivity : 0The information contained herein is based on data considered accurate and is offered solely for information,consideration and investigation.Electroloy extends no warranties, makes no representation and assumes no responsibility as to the accuracy, completeness or suitability of this data for any purchaser’s use .The data on this Material Safety Data Sheet relates only to this product and does not relate to use with any other material or in any process.All chemical products should be used only by or under the direction of technically qualified personnel who are aware of the hazards involved and the necessity for reasonable care in handling. Hazard communication regulations require that employees must be trained how to use a Material safety Data Sheet as a source of Hazard information.NE = Not Established NA = Not Applicable。

无铅锡线物质安全资料表MSDS

无铅锡线物质安全资料表MSDS
一、供货商资料: 制造商或供货商名称: 制造商或供货商地址: 负责人及电话: 公司电话:
物质安全资料表
传真:
二、技术指标:
物品名称:无铅锡线SnAg0.3Cu0.7 按照国家标准
化学成份(%)
熔点 工作温度
主要成份(%)
不纯物(PPM)
锡 Sn
铜Cu
217℃ 银Ag 铅Pb 锑Sb 铋Bi 铁Fe 镉Cd 锌Zn 铝Al 砷As │
十一、毒性资料: 急毒性:无 局部效应:无 致敏感性:无 慢毒性或长期毒性:长期涂用含铅0.18ml/L以上之涂水可能导致铅中毒。
特殊效应:无
十二、生态资料: 可能之环境影响/环境流佈: 无 水中毒性: 无 移动性、生物累积性: 无
十三、废气处理方法: 废气处理方法:无 未使用或残存气体:无 紧急状况时:无
十四、运送资料: 国际运送规定:国际运输规定:国际航空运输协会(LATA) 联合国编号:不适用 国内运送规定:除依据操作及保管上应注意事项外,亦遵照有关中毒预防规则
之注意事项。 特殊运送方法及注意事项:
十五、适用法规: 劳动安全卫生法、铅中毒预防规则、废气物清理法。
十六、其他资料: 公司名称:
地址: 电话: 制表人:
传真: 制表日期:
修订日期 年 月 日

、生殖、肠及泌尿系统造成伤害。

★眼睛、皮肤接触:熔锡进入眼中可能造成永久的伤害,皮肤与熔锡接

触可能造成严重的组织伤害。
意 慢性:怀孕妇女应避免暴露有铅及有机化合物的环境下,否则会有产后效应,


铅可能会对发育中的胎儿造成浅在的伤害。
◆环境影响:无。
◆物理性及化学性危害:灼伤及吸入分解产物可能造成之神经伤害。

无铅锡丝 Lead Free Solder Wire物质安全资料表MSDS

无铅锡丝 Lead Free Solder Wire物质安全资料表MSDS

物質安全資料表
Material Safety Data Sheet
No. SW001-E9650
一、物品與廠商資料
二、危害辨識資料
警告。

吞食有害、皮膚接觸有害、吸入有害。

三、成分辨識資料
四、急救措施
五、滅火措施
六、洩漏處理方法
七、安全處置與儲存方法
八、暴露預防措施
九、物理及化學性質
十、安定性及反應性
十一、毒性資料
十二、生態資料*本項無法取得相關資訊
十三、廢棄物處置辦法
十四、運送資料
十五、法規資料
備註:
-上述資料符號「-」代表目前查無相關資料。

-本表僅供參考,使用者請依應用需求,自行負責判段其可用性與必要的處理。

  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
聯合國編號:不適用
國內運送規定:除依據操作及保管上應注意事項外,亦應仔細閱讀容器上之相關標示
特殊運送方法及注意事項:無。
十五、適用法規:
勞動安全衛生法、銀中毒預防規則、廢棄物清理法。
十六、其他資料:
參考文款:AIR PRODUCTS MSDS、INTERN TIONAL MARITIME DANGEROUS GOODS CODE
十三、廢氣處理方法:(本項不適用)
廢氣處置方法:---
˙未使用或殘存氣體:---
˙緊急狀況時:---
十四、運送資料:
國際運送規定:
INTERNATIONAL MARITIME’DANGEROUS GOODS CODELABEL:
美國N/D SHIPPING LABEL:
N/D SHIPPING NAME:
----------
-------------
-------------
個人防護設備:
呼吸防護:
˙一般使用:配戴口罩。
˙緊急狀況:粉塵或煙霧超過容許濃度時,應配戴防粉塵及煙霧的防毒面具。
˙眼睛防護:配戴安全眼鏡及/或面罩(當有粉塵飄散或熱金屬噴濺時)。
˙皮膚及身體防護:應穿戴工作衣及防護手套以避免灼燙傷。
松香(Rosin)
---
2.0%
活性劑(Activator)
---
0.16%
其他成份
---
0.28%
3、危害辨識資料:







緊急概要:
健康危害效應:
急性:
˙吸入:粉塵可能引起機制性刺激。
˙食入:高劑量可能引起反胃、嘔吐及下瀉。
˙眼睛、皮膚接觸:粉塵可能會對眼睛造成機制性刺激,對皮膚造成輕度刺激及紅腫
十一、毒性資料:(本項無法取得相關資料)~NIF (No Information Found)
急毒性:---
局部效應:---
致敏感性:---
慢毒性或長期毒性:---
特殊效應:---
十二、生態資料:(本項無法取得相關資料)~NIF
可能之環境影響/環境流佈:---
˙水中毒性:---
˙移動性、生物累積性:---
危害等級分類
NFPA
HMIS
等級:0:最少;1:輕微;2:中等;3:高的;4:嚴重
NFPA:National Fire protection Association rating identifies hazards during a fire emergency.
美國防火協會對火災燒燙之危害等級
HMIS:Hazardous Materials Identification System rating applies to process as packaged.
˙其他注意事項:工作場所禁止吃東西,喝飲料、抽煙及化粧。
衛生措施:工作後,吃東西、喝飲料或抽煙前應洗手。
九、物理及化學資料:
物質狀態:□液體□液化氣體□壓縮氣體
pH值:不適用
形狀:線狀
顏色:銀灰色
分子量:不適用
氣味:無氣味
沸點:不適用
熔點:232℃
分解溫度:---
閃火點:不適用℃□開杯□不適用
自燃溫度:不適用
危害物質系統應用於產品危害等級
健康
1
1
著火性
1
0
反應性
0
0
本表僅供參考,運作人需自行必要的處理。頁次3/3
最重要症狀及急害效應:皮膚及器官的刺激感。
對急救人員之防護:急救人員應配戴防塵口罩及防護衣。
對醫師之提示:錫之粉塵及煙氣傷害。
頁次1/3
物質安全資料表
五、滅火措施:
適用滅火劑:水、泡沫、乾粉及二氧化碳滅火劑。
滅火磚可能遇過之特殊危害:無相關資料可查。
特殊滅火程式:不適用。
消防人員之持殊防護設備:氧氣筒及防護衣。
不同暴露途徑之急救措施:
˙吸入:將患者移至清新空氣處,如果患者已停止呼吸,則施以人工呼吸並送急診。
˙皮膚接觸:以大量的清水沖洗,如可能時使用肥皂。如果刺激感仍存在,則尋求醫療看護。
˙眼睛接觸:以大量的清水沖洗,15分鐘或者直到刺激感消失。如果,刺激感仍存在,則尋求醫療看護。
˙食入:勿催吐(除非醫療人員指示),如果患者仍有意識且清醒,立刻送診。
慢性:長期吸入粉塵或煙氣可能引起良性肺塵沈著病,造成肺部組織變化但不會有明顯的失能或併發症。
環境影響:量大造成空氣污染。
物理性及化學性危害:灼傷及吸入分解產物可能造成之神經傷害。
特殊危害:鉛及某些鉛化物可能會致癌。
主要症狀:皮膚及器官有刺激感。
危害物質分類:第九類:其他危險
圖示:第九類:其他危險
4、急救措施
儲存:避免高溫、陽光直射及氧化劑、酸與過氧化氫。
八、曝露預防措施:
工程控制:提供足夠的機械式排氣裝置。
容許濃度
生物指標
時量平均容許濃度
(TWA)
短時間時量平均容許濃度
(SGEL)
最高容許濃度
(Ceiling)
LD50
(測試動物、吸收途徑)
LC50
(測試動物、吸收途徑)
Sn:2.0mg/m3
----------------
六、洩露處理方法:
個人應注意事項:避免吸入銲錫煙氣或粉塵。
環境注意事項:勿使洩露區域擴大。
清理方法:抽氣或沖洗。
七、安全處置與儲存方法:
處置:
1.閱讀所有的容器標示。
2.工作場所嚴禁吃東西、喝飲料、抽煙及化粧。
3.無法回收或再循環使用的原料、製品或廢料應請合格廢棄物處理商妥為處理。空容器可能仍殘留粉塵或固體而有危險性,處置人員應閱讀容器上與該項物質有關的所有警語及預防措施。
爆炸界限﹪
下限(LEL)
不適用
上限(UEL)
不適用
蒸氣比重(空氣=1):不適用
蒸氣壓(21.1℃):不適用
密度:7.3g/cm3
水中溶解度:不溶於水
頁次2/3
物質安全資料表
十、安定性及反應性:
安定性
安定
特殊狀況下可能之危害反應
不安定
危害分解物:無。
應避免之狀況:高溫。
應避免之物質:具氧化後之物質、酸,過氧化氫(752%)。
物質安全資料表
1、物品與廠商資料:
物品中(英)文名稱:無鉛錫絲Lead-Free Solder Wire
物品編號:Sn1000.6□0.8□1.0□1.2□1.6□2.0
製造商或供應商名稱:
製造商或供應商地址:
製造商或供應商電話:
傳真電話:
2、成份辨識資料:
中(英)文名t;97.56
相关文档
最新文档