天线规格书
AR9341参数规格书
射频参数
802.11b/g/n 射频特性 802.11b/g/n : 2.4GHz-2.483GHz (中国) 韩国、ETSI、FCC通信信道可选 调制技术 发射功率 传输速率
OFDM : BPSK@6/9Mbps、QPSK@12/18Mbps、16-QAM@24Mbps、64-QAM@48/ DSSS : DBPSK@1Mbps、DQPSK@2Mbps、CCK@5.5/11Mbps MIMO-OFDM : MCS 0-15 最大13DBM 300 Mbps 802.11n(2.4GHz) -90dBm @ MCS0
WEP 安全机制 支持 64/128/152 位WEP安全密码 无线安全 隐藏 系统设置 软件升级 用户管理 系统监控 日志 恢复设置 备份功能 WPA/WPA2 安全机制 (WPA-PSK 使用 TKIP 或 AES) WPA/WPA2 安全机制 (WPA-EAP 使用 TKIP) SSID 安全机制 WEB配置（HTTP/远程登陆） WEB网页或者TFTP来升级软件 可配置用户和密码 设备和网络状态统计 提供本地日志，主机日志，文件传输日志 可恢复出产默认设置 可备份系统配置，在需要时恢复用户各项配置
物理特性
工作温度: -10ºC～55ºC 温度特性 存贮温度:-40ºC～70ºC 湿度 5%~95% (typical)
AP专用芯片
MIMO技术
s 自协商以太网口，1个电话接口
0/100Mbps 自协商以太网口），1个电话透传接口
I 内置2t2r 天线
t兼容供电
射频参数
Hz-2.483GHz (中国)
软件特性
万能中继模式
t)
thernet)
.4G WLAN)
8个（支持中文SSID）
诺基亚 ONT G-2425G-A（外部天线） 技术规格书说明书
The Nokia ONT G-2425G-A is a dual-band Wi-Fi 5 mesh system with Wi-Fi Alliance compliant Wi-Fi EasyMesh, enhanced by Nokia value added features.The Nokia WiFi Mesh Middleware creates a self-healing, self-optimizing network and includes intelligent channel selection, band steering, client steering and backhaul management to provide the best Wi-Fi performance. As it is EasyMesh ™ compliant, it provides interoperability and avoids vendor lock-in.Optionally, the Nokia ONT G-2425G-A can be managed by the Nokia WiFi Cloud Controller. The associated Home Console presents the help desk agents with a real-time holistic view of the in-home network to assist them with easy identification and instantaneous resolution of issues. The Network Console provides an end-to-end Wi-Fi network view and allows management of groups of Wi-Fi networks.Nokia ONT G-2425G-A (external antenna)Residential gateway – ONT for the intelligent mesh networkThe Nokia ONT G-2425G-A is the solution for home networking that is delivered by Gigabit Passive Optical Network (GPON). The device has built-in concurrent dual-band Wi-Fi ® 802.11b/g/n and 802.11ac networking with triple play capabilities that include voice, video and data using high-capacity Wi-Ficonnectivity. The G-2425G-A supports Wi-Fi 5 and Wi-Fi EasyMesh™, to create a whole home mesh network. This coverage can be expanded at any time by installing additional Wi-Fi EasyMesh-capable beacons to ensure seamless roaming throughout the home. The G-2425G-A includes the Nokia WiFi Mesh Middleware which ensures the best possible Wi-Fi performance. The end-user experience is enhanced by the service provider’s Wi-Fi management capabilitiesin the cloud and intuitive home user support using the Nokia WiFi mobile app.This Nokia indoor ONT is designed to deliver triple play services (voice, video and data) to residential subscribers. Voice services are provided through two plain old telephone service (POTS) ports withan integrated analog telephone adapter (ATA)that converts voice traffic into Session Initiation Protocol (SIP). Connectivity to an existing public switched telephone network (PSTN) Class 5 switchis supported through SIP with direct interoperability of a variety of soft switches. Ethernet connectivity is available on four Gigabit Ethernet (GigE) ports, all of which have the ability to burst up to a full gigabit dynamically. Service providers can deliver video using IP packets (IPTV).Relying on dual-band Wi-Fi allows for support ofthe widest range of customer products. The IEEE 802.11ac standard enables gigabit speeds on many newer devices, while the widely supported 802.11b/g/n standard can simultaneously connect to legacy devices.Features• Four RJ-45 10/100/1000 Ethernet ports• Two POTS ports for carrier-grade voice services • Dual-band concurrent Wi-Fi: 2.4GHz and 5GHz • Wireless IEEE 802.11b/g/n: 2.4GHz• Wireless IEEE 802.11ac: 5GHz• Network Address Translation (NAT) and firewall • Voice interworking function from the analog POTS lines to the voice over IP (VoIP) and Ethernet layers • Two USB 2.0 host ports• Optics support received signal strength indication (RSSI)• Supports virtual private network (VPN) passthrough for Point-to-Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol (L2TP) and IPSec• Port forwarding and demilitarized zone (DMZ)/ dynamic domain name system (DDNS)Benefits• EasyMesh enhanced by Nokia value added features • Integrates the ONT and wireless access pointfunctions to allow for one less device in the home • Delivers connectivity to Ethernet devices within the home• Supports full triple play services, including voice, video and data• Allows service-per-port configurations• Supports IP video distribution• Supports easy-to-use USB 2.0 connections for external disk drives and home network attached storage (NAS)• Delivers voice services using VoIP• Delivers video services efficiently with multicasting or unicasting• Facilitates network management using Nokia 5520 AMS• Flexible video delivery options of Ethernet or wireless to set-top boxes (STBs) Technical specifications Physical• Height: 131 mm (5.1 in)–Excluding antenna of 170 mm (6.7 in)• Width: 170 mm (6.7 in)• Depth: 30 mm (1.2 in)• Weight: 0.42 kg (0.92 lb)Installation• Desk mountable• Wall mountable with bracketOperating environment• Temperature: -5°C to 45°C (23°F to 113°F)• Relative humidity: 10% to 90%Power requirements• Local powering with 12 V input (feed uses external AC/DC adapter)• Dying gasp support• Power consumption: <24 WGPON uplinks• Wavelength: 1490 nm downstream, 1310 nm upstream• Line rate: 2.488 Gb/s downstream, 1.244 Gb/s upstream• GPON Encapsulation Method (GEM) mode support for IP/Ethernet service traffic• ITU-T G.984.3-compliant dynamic bandwidth reporting• ITU-T G.984.3-compliant Advanced Encryption Standard (AES) in downstream• ITU-T G.984.3-compliant forward error correction (FEC)• ITU-T G.988 Appendix 1 and Appendix 2 ONT Management Control Interface (OMCI)• Remote software image download• BOSA On Board (BOB) type laser, SC/APC connectorEthernet interfaces• 10/100/1000Base-T interface with RJ-45 connectors• Wi-Fi Protected Access (WPA) support, including pre-shared key (WPA-PSK) and WPA2• Forwarding• Ethernet port auto-negotiation or manual configuration with medium dependent interface/ medium dependent interface crossover(MDI/MDIX)• Virtual switch based on IEEE 802.1q virtual LAN (VLAN)• VLAN tagging/de-tagging per Ethernet port and marking/remarking of IEEE 802.1p • IP type of service/differentiated services code point (ToS/DSCP) to IEEE 802.1p mapping for untagged frames• Class of service (CoS) based on VLAN ID, IEEE 802.1p bit• Internet Group Management Protocol (IGMP)v2/v3 snoopingPOTS interfaces• Two FXS ports for VoIP service with RJ-11 connectors• Multiple codecs: ITU-T G.711, ITU-T G.729• SIP (RFC 3261)• ITU-T G.168 echo cancellation• Services: caller ID, call waiting, call hold, 3-way call, call transfer, message waiting indication• 3 ringer equivalence numbers (RENs) per line • Dual-tone multi-frequency (DTMF) dialing• Balanced sinusoidal ring signal, 55 V root mean square (RMS)WLAN interfaces• 2x2 MIMO on 802.11b/g/n• 2x2 MIMO on 802.11ac• 5 dBi external antenna• WPA, WPA-PSK/TKIP, WPA2, WPA2-PSK/AES• Media access control (MAC) filtersUSB interface• Two USB 2.0 interfacesResidential gateways• IPv4 and IPv6• Point-to-Point Protocol over Ethernet (PPPoE) and IP over Ethernet (IPoE)• NAT, DMZ and firewall• Dynamic Host Configuration Protocol (DHCP) and domain name system (DNS) proxy• IGMP proxy• Supports TR-069About NokiaWe create the technology to connect the world. Only Nokia offers a comprehensive portfolio of network equipment, software, services and licensing opportunities across the globe. With our commitment to innovation, driven by the award-winning Nokia Bell Labs, we are a leader in the development and deployment of 5G networks.Our communications service provider customers support more than 6.4 billion subscriptions with our radio networks, and our enterprise customers have deployed over 1,300 industrial networks worldwide. Adhering to the highest ethical standards, we transform how people live, work and communicate. For our latest updates, please visit us online and follow us on Twitter @nokia.Nokia operates a policy of ongoing development and has made all reasonable efforts to ensure that the content of this document is adequate and free of material errors and omissions. Nokia assumes no responsibility for any inaccuracies in this document and reserves the right to change, modify, transfer, or otherwise revise this publication without notice.Nokia is a registered trademark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or trade names of their respective owners.© 2020 NokiaNokia Oyj Karaportti 3FI-02610 Espoo, Finland LEDs• Power • Link • Auth • LAN (1~4)• TEL (1~2)• VoIP• Wi-Fi Protected Setup (WPS) 2.4GHz/5GHz • WLAN 2.4GHz/5GHz • USB • InternetSafety and electromagnetic interference (EMI)• Protection of over voltage/currentRegulatory compliances• CE Mark • FCC Mark。
智能穿戴天线规格书WAN3216F245C0X(X=2,4,6)_3216 L-Ant 2.4G Type-2,4,6 Ver.2
1.Electrical SpecificationRemark : Bandwidth & Peak Gain was measured under evaluation board of page2 Part Number InformationWAN 3216 F 245 C 0X(X=2,4,6)A B C D E F2.Recommended PCB Pattern◆Evaluation Board Dimension◆Suggested Matching Circuit永昀科技股份有限公司WinWave Electronic Co., Ltd.9F-2, No.82, Sec. 3, Beisin Rd., Sindian District, New Taipei City 23143, Taiwan(R.O.C.)Electronic Co., Ltd.W IN W AVELayout Dimensions in Clearance area ( Size=4.40*5.0mm)Circuit3.Measurement ResultsReturn LossRadiation PatternChamber Coordinate SystemYZ4. Reliability and Test Condictions1. No visible mechanical damage1. No visible mechanical damage5. Soldering and MountingMildly activated rosin fluxes are preferred. The minimum amount of solder can lead to damage from the stresses caused by the difference incoefficients of expansion between solder, chip and substrate. Theterminations are suitable for all wave and re-flow soldering systems. If hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools.Recommended temperature profiles for re-flow soldering in Figure 1.Products attachment with a soldering iron is discouraged due to the inherent process control limitations. In the event that a soldering iron must beemployed the following precautions are recommended.‧Preheat circuit and products to 150℃‧Never contact the ceramic with the iron tip‧Use a 20 watt soldering iron with tip diameter of 1.0mm‧280℃ tip temperature (max)‧1.0mm tip diameter (max)‧Limit soldering time to 3 sec.6. Packaging Information◆Tape Specification:◆Reel Specification: (7’’, Φ180 mm)7. Storage and Transportation Information◆Storage ConditionsTo maintain the solderability of terminal electrodes:1. Temperature and humidity conditions: -10~ 40℃ and 30~70% RH.2. Recommended products should be used within 6 months from the timeof delivery.3. The packaging material should be kept where no chlorine or sulfurexists in the air.◆Transportation Conditions1. Products should be handled with care to avoid damage orcontamination from perspiration and skin oils.2. The use of tweezers or vacuum pick up is strongly recommended forindividual components.3. Bulk handling should ensure that abrasion and mechanical shock areminimized.8. Revision Table。
GPS.BD2(北斗)四臂螺旋天线规格书
GPS、BD2(北斗)多频四臂螺旋天线规格书
前言：随着现代无线通讯事业的发展，卫星导航
定位系统在人们的生活中起着越来越重要的作用。
从而
对GPS以及北斗天线的需求越来越大，深圳微航磁电技
术有限公司基于新型高分子介质材料，研发出了现有的
GPS+BD2（北斗）四臂螺旋多频天线。
一．产品说明
本产品属于3D构型天线，放置空间任何位置时增益稳定
二．产品类别
天线类别:四臂螺旋多频天线
三．产品编码
WH-S-GB-D:GPS+BD2四臂螺旋多频天线
四．产品性能
GPS性能：
频率范围：1575.42±1.023Mhz
极化方向：右旋圆极化
增益:-2dBi
电压驻波比≤1.5
阻抗：50Ω
轴比：≤6dB
不圆度：±2.0dB
BD2性能：
频率范围：1561.42±3.58Mhz
极化方向：右旋圆极化
增益:-2dBi
电压驻波比≤1.5
阻抗：50Ω
轴比：≤6dB
不圆度：±2.0dB
五．产品性能指标
增益
电压驻波比
Marker1:1575.42Mhz（1.8） Marker2:1561.098Mhz（1.3）
阻抗：50Ω
Marker1:1575.42Mhz
五．产品外形尺寸六.焊接方式
七．引脚方式。
KH-5G-SMAJ-131MM 天线产品规格书说明书
产品规格书Product Specification产品名称： 天线产品型号： K H-5G-SMAJ-131MM 规格描述：5G ，SMA-J ，胶棒版 本 ： A01日 期 ： 2020/07/17客户承认Customer Approve:制 作drawing 审 核check 批 准approved 陈星 向金保贺俊驹客户确认/日期1.工程图纸Product Drawing深圳市金航标电子有限公司2.产品规格Product Specification射 频 性能 参 数频率范围（MHZ ）824-960/1710-2680/ 3400-3600/4800-4900电压驻波比 ≤3.0 增益（dBi ） 3.0 辐射方式 全向 极化方式 垂直极化 输入阻抗(Ω) 50 最大功率（W ）10机 械 性 能 参 数接口形式 SMA-J 天线长宽（MM ）171*19.5环 境 参 数工作温度 -30℃~60℃ 工作湿度40~85%3.S11测试数据4.增益和效率测试数据5.可靠性试验报告项目测试条件规格储存环境在没有指定的情况下测试温度、湿度、气压如下：1.温度为-40℃～+85℃2.相对湿度为45%-85%3.气压为86kpa-106kpa电气机械性能正常高低温试验在70℃与-40℃之间进行5次循环，然后在正常条件下1-2H，检查外观质量。
尺寸应满足规定并应满足满足于机械、电气性能耐恒定湿热试验相对湿度95±3%，试验温度：40℃.持续2H作用后，试品取出后5min之内测定电气性能，试品在正常条件下1-2H，检查外观质量尺寸应满足规定并应满足满足于机械、电气性能振动试验振频范围10-55HZ，位移幅值：0.35MM，加速度幅值：50.0M/S，扫频循环次数：30次电气机械性能正常跌落试验1M高空按照互相垂直的轴方向自由跌落3次电气机械性能正常测试设备及原理1.测试设备：网络分析仪Network Analyzers :Agilent 8753D 5071B综合测试仪Communications Test Set: Agilent E5515C3D暗室测试系统 3D Chamber Test System：2.测试原理：。
智能穿戴天线规格书WAN2012F245C0X(X=2,4,6)_2012 L-Ant 2.4G Type-2,4,6 Ver.1
1.Electrical SpecificationRemark : Bandwidth & Peak Gain was measured under evaluation board of page2Part Number InformationWAN 2012 F 245 C 0X(X=2,4,6)A B C D E F2.Recommended PCB Pattern◆Evaluation Board Dimension◆Layout Dimensions in Clearance area ( Size=3.0*5.0mm)永昀科技股份有限公司WinWave Electronic Co., Ltd.9F-2, No.82, Sec. 3, Beisin Rd., Sindian District, New Taipei City 23143, Taiwan(R.O.C.)Electronic Co., Ltd.W IN W AVEFootPrint (Unit : mm)◆Suggested Matching Circuit◆Tuning component : 0.6pF永昀科技股份有限公司WinWave Electronic Co., Ltd.9F-2, No.82, Sec. 3, Beisin Rd., Sindian District, New Taipei City 23143, Taiwan(R.O.C.)Electronic Co., Ltd.W IN W AVE3. Measurement ResultsReturn LossRadiation PatternChamber Coordinate SystemY4. Reliability and Test Condictions1. No visible mechanical damage1. No visible mechanical damage5. Soldering and MountingMildly activated rosin fluxes are preferred. The minimum amount of solder can lead to damage from the stresses caused by the difference incoefficients of expansion between solder, chip and substrate. Theterminations are suitable for all wave and re-flow soldering systems. If hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools.Recommended temperature profiles for re-flow soldering in Figure 1.Products attachment with a soldering iron is discouraged due to the inherent process control limitations. In the event that a soldering iron must beemployed the following precautions are recommended.‧Preheat circuit and products to 150℃‧Never contact the ceramic with the iron tip‧Use a 20 watt soldering iron with tip diameter of 1.0mm‧280℃ tip temperature (max)‧1.0mm tip diameter (max)‧Limit soldering time to 3 sec.6. Packaging Information◆Tape Specification:◆Reel Specification: (7’’, Φ180 mm)7. Storage and Transportation Information◆Storage ConditionsTo maintain the solderability of terminal electrodes:1. Temperature and humidity conditions: -10~ 40℃ and 30~70% RH.2. Recommended products should be used within 6 months from the timeof delivery.3. The packaging material should be kept where no chlorine or sulfurexists in the air.◆Transportation Conditions1. Products should be handled with care to avoid damage orcontamination from perspiration and skin oils.2. The use of tweezers or vacuum pick up is strongly recommended forindividual components.3. Bulk handling should ensure that abrasion and mechanical shock areminimized.8. Revision Table。
天线规格书
规格承认书_______________________________________________SPECIFICATION FOR APPROV AL客户名称:品名:手持对讲机天线规格: 433.92MHz型号:ATL-V0423日期:2013-01-08客户回签：工程部品质部批准维力谷无线技术(深圳)有限公司工程部品质部批准SPECIFICATION电气性能指标（Electrical specifications）频率范围Resonate Frequency 433.92MHZ阻抗Resonate Impedance 50 ohm Nominal(Depend onavail ground plane) 方向图Radiation pattern全向（Omni direction）极化方式Polarization垂直极化（Vertical）驻波比VSWR/50 Ohms 1.5 or less绝缘电阻 Insulation resistance 500 M ohm DC 500V机械特性 Mechanical characteristics天线尺寸 dimension of antenna ￠13(mm)*129(mm)天线重量 Weight of antenna13g (大约)天线接头 SMA-M天线管与接头螺纹之间的夹紧力如下：（The strength of fixing between sleeve and stud shall withstand the following stresses）垂直方向 Vertical Direction 2.0kgs圆周旋转方向 Rotating Direction 2.0kgs一般特性 General Characteristics存储温度 Storage Temperature -30 ℃ to 80℃工作温度 Operating Temperature -30 ℃ to 60℃每月定期检查天线的机械和电气功能如下：Mechanical and electrical functions after the antenna being Tested by a regular mount device under the following conditions:位移Displacement 轴向上+/-5°(+/-5° of the axisOriginal position)耐久性 Duration1000 cycles/minutes时间Time 5 minutes抗冲击性 shock Resistance 在跌落试验完成之后机械性能和电气性能不变（satisfy theelectrical and mechanicalcharacteristics after drop downwith 100g upon rubber block）工程图纸：产品实物照片：测试参数：1、RETURN LOSS2.V.S.W.R:3.SMITH CHART:。
Ra-01S规格书说明书
Ra-01S规格书版本V1.1版权©2020免责申明和版权公告本文中的信息，包括供参考的URL地址，如有变更，恕不另行通知。
文档“按现状”提供，不负任何担保责任，包括对适销性、适用于特定用途或非侵权性的任何担保，和任何提案、规格或样品在他处提到的任何担保。
本文档不负任何责任，包括使用本文档内信息产生的侵犯任何专利权行为的责任。
本文档在此未以禁止反言或其他方式授予任何知识产权使用许可，不管是明示许可还是暗示许可。
文中所得测试数据均为安信可实验室测试所得，实际结果可能略有差异。
文中提到的所有商标名称、商标和注册商标均属其各自所有者的财产，特此声明。
最终解释权归深圳市安信可科技有限公司所有。
注意由于产品版本升级或其他原因，本手册内容有可能变更。
深圳市安信可科技有限公司保留在没有任何通知或者提示的情况下对本手册的内容进行修改的权利。
本手册仅作为使用指导，深圳市安信可科技有限公司尽全力在本手册中提供准确的信息，但是深圳市安信可科技有限公司并不确保手册内容完全没有错误，本手册中的所有陈述、信息和建议也不构成任何明示或暗示的担保。
文件制定/修订/废止履历表版本日期制定/修订内容制定核准V1.02020.8.12首版徐V1.12020.8.19更新部分参数徐目录一、产品概述 (5)二、电气参数 (6)三、外观尺寸 (8)四、管脚定义 (10)五、原理图 (11)六、设计指导 (12)七、回流焊曲线图 (14)八、包装信息 (15)九、联系我们 (15)一、产品概述安信可LoRa系列模块（Ra-01S）由安信可科技设计开发。
该模组用于超长距离扩频通信，其射频芯片SX1268主要采用LoRa™远程调制解调器，用于超长距离扩频通信，抗干扰性强，能够最大限度降低电流消耗。
借助SEMTECH的LoRa™专利调制技术，SX1268具有超过-148dBm的高灵敏度，+22dBm的功率输出，传输距离远，可靠性高。
同时，相对传统调制技术，LoRa™调制技术在抗阻塞和选择方面也具有明显优势，解决了传统设计方案无法同时兼顾距离、抗干扰和功耗的问题。
AR9344参数规格书
包装 整套主机 直流12V 1A POE 电源适配器 用户手册
硬件配置 线网桥 专业芯片 MIMO技术
自适应有线网络接口（支持12V POE供电） 出产默认设置使用 支持12V本地 BI内置天线 CM 0V/220V
需要时恢复用户名各项配置 物理特性
0℃
包装 整套主机 直流12V 1A POE 电源适配器 用户手册
射频参数 802.11b/g/n: 5.8GHz 韩国、日本、ETSL/FCC 通信信道可选 OFDM=BPSK,QPSK,16-QAM,64-QAM DSSS=SBPSK,DQPSK,CCK 300Mpbs 802.11n(5.8GHz) -90dBm@MCSO -70dBm@MCS7 -90dBm@MCS8 -68dBm@MCS15 23dBm±1.5dBm 200mW 802.11n(5.8Hz)(±1.5dBm) 25dBm@MCS0~2/MCS8~10 24dBm@MCS3/MCS11 23dBm@MCS4/MCS12 23dBm@MCS5/MCS13 22dBm@MCS6/MCS14 22dBm@MCS7/MCS15
主芯片 无线技术 Menory
Falsh 设备接口
天线 产品尺寸 电源适配器
射频特性
调制模式 传输速率
接收灵敏度
发射功率
工作模式 Байду номын сангаас信标准
硬件配置 AR9344 300Mbps 无线网桥 专业芯片 802.11N,2T2R 300M MIMO技术 新一代DDR2 64MB 8MB 2个10/100/1000Mbps自适应有线网络接口（支持12V POE供电） 一个复位按钮，恢复出产默认设置使用 一个直流电源接口 支持12V本地 5.8G 定向高增益14DBI内置天线 直径16.8CM ，高4.5CM 12V-15V(POE)/1A;110V/220V
AP2400-OS,六天线基站,技术规格书
根据用户网络需求可采取网关或旁挂方式部署，最大限度减少无线网络部署对用户原有网络环境的
改动，从而有效减少无线网络部署的时间和成本。
2、 无盲点覆盖能力
Beamforming（空间自适应波束赋形）技术使得 AP2400-OS 具有优秀的非视距覆盖能力，从而使
每个基站在任何环境都可以具有更大的无盲点覆盖范围。
典型应用
AP2400-OS 是理想的
城市 WLAN 基站覆盖设备，
在被正确部署后，其可以满
足范围内室内 CPE 以及移
动 CPE 的接入。如果采用
室外 CPE，其覆盖范围将会
大大提高，采用这种方式，
可以
当某个基站不具有有
线回传链路时，AP2400-OS 强大的 Beamforming（空间自适应波束赋形）技术能够同时提供接入访问
标准规范
射频 调制方式 发射功率 (802.11b/g)
EIRP
接收灵敏度
规 格 (不 含 安 装 件 )
规格
AP2400-OS,0100G00P 支 持 WEP（ 64bit or 128 bit）、 WPA、 WPA2 加 密 方 式
基于 WEB 管理与配置界面
支持标准 SNMPv2 以及 MIB 库
5.5Mbps @ -100.5dBm
18Mbps @ -98dBm
11Mbps @ -96dBm
24Mbps @ -95dBm
36Mbps @ -92dBm
48Mbps @ -88dBm
54Mbps @ -86dBm
高度：5.5cm
宽度：36cm
长度：39cm
重量：4.2kg
京信通信系统（中国）有限公司 /
Beamforming（空间自适应波束赋形）技术固有的空间过滤功能以及独有的动态干扰处理能力使得
4代IPEX铜管天线规格书
APPROVAL
CHIEF
SUPERVISOR
供方确认 SUPPLIER SIGNATURE
APPROVAL
CHECK
DESIGN
承认书项目表
ቤተ መጻሕፍቲ ባይዱ内容
NO.
（Contents）
1 承认书封面 （Spec Cover）
2 承认书项目表（Spec Item ）
3 产品图片 （Sample Photo )
4 工程成品图 （Drawing）
产品图片 Sample Photo
电性测试报告 Test Reports
Frequency Impedance V.S.W.R Return Loss Radiation Gain (Peak) Cable Loss Polarization Admitted Power Connector
Antenna Material Cable Type Operating Temp. Storage Temp. Cable Color
5 电性测试报告（Test Reports ）
6 S参数测试 （S Parameter ）
7 增益测试 （Gain Test ）
8
N/A
9
-
10
-
11
-
12
-
13
-
14
-
页数 （Number of Page）
1 1 1 1 1 1 1 N/A -
页码 （Page Code）
1 2 3 4 5 6 7 N/A -
深圳市腾霏尔科技有限公司
Shenzhen Teng Phil Technology Co., Ltd.
深圳市腾霏尔科技有限公司
TX4G-FPC-8121 天线规格书说明书
TX4G-FPC-8121天线规格书4G/LTE FPC内置天线IPEX-Ⅰ代接口第一章产品简介TX4G-FPC-8121是一款4G/LTE频段的FPC内置天线，天线尺寸81mm×21mm，IPEX-Ⅰ代接口，适用于各种4G/LTE频段的终端设备（手机、无线网卡、路由器）、无线通讯模块等，天线体积小,性能可靠，内置于模块安装使用，信号稳定。
第二章规格参数电气参数4G/LTE频率范围698-960MHz;1710-2700MHz天线增益5dBi电压驻波比≤1.5极化方向线极化辐射方向全向输入阻抗50Ω功率容量2W其他参数产品尺寸81mm×21mm整体重量1g馈线材质RF1.13馈线长度109mm天线材质FPC接口方式IPEX-Ⅰ代接口工作温度-30℃～+75℃储存温度-30℃～+75℃第三章天线特性电压驻波比（VSWR）史密斯圆图(Smith chart)第四章常见问题●天线频率必须和无线设备频率匹配，否则通信效果不佳；●通信频率越低，波长越长，绕射性能越好；●当存在直线通信障碍时，通信距离会相应的衰减；●请注意天线辐射方向，天线安装方向不正确导致传输距离近；●地面吸收无线电波，靠近地面测试效果较差，建议提高高度；●海水具有极强的吸收无线电波能力，故海边测试效果不佳；●天线附近有金属物体或置于金属壳内，信号衰减会非常严重；●天线与通信设备阻抗匹配程度差会导致通信效果差。
公司全称NAME成都致哲科技有限公司公司电话NUMBER************官方网址WEBSITE 商务合作BUSINESS****************技术支持SUPPORT******************批量采购BATCH马小姐176****0813徐先生135****3087公司地址ADDRESS四川省成都市高新西区西区大道199号模具工业园B5淘宝企业店SAMPLING https:///天猫旗舰店SAMPLING https:///。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
规格承认书
_______________________________________________
SPECIFICATION FOR APPROV AL
客户名称:
品名:手持对讲机天线
规格: 433.92MHz
型号:ATL-V0423
日期:2013-01-08
客户回签：
工程部品质部批准
维力谷无线技术(深圳)有限公司
工程部品质部批准
SPECIFICATION
电气性能指标（Electrical specifications）
频率范围Resonate Frequency 433.92MHZ
阻抗Resonate Impedance 50 ohm Nominal(Depend on
avail ground plane) 方向图Radiation pattern全向（Omni direction）
极化方式Polarization垂直极化（Vertical）
驻波比VSWR/50 Ohms 1.5 or less
绝缘电阻 Insulation resistance 500 M ohm DC 500V
机械特性 Mechanical characteristics
天线尺寸 dimension of antenna ￠13(mm)*129(mm)
天线重量 Weight of antenna13g (大约)
天线接头 SMA-M
天线管与接头螺纹之间的夹紧力如下：（The strength of fixing between sleeve and stud shall withstand the following stresses）垂直方向 Vertical Direction 2.0kgs
圆周旋转方向 Rotating Direction 2.0kgs
一般特性 General Characteristics
存储温度 Storage Temperature -30 ℃ to 80℃
工作温度 Operating Temperature -30 ℃ to 60℃
每月定期检查天线的机械和电气功能如下：
Mechanical and electrical functions after the antenna being Tested by a regular mount device under the following conditions:
位移Displacement 轴向上+/-5°(+/-5° of the axis
Original position)
耐久性 Duration1000 cycles/minutes
时间Time 5 minutes
抗冲击性 shock Resistance 在跌落试验完成之后机械性能和电
气性能不变（satisfy the
electrical and mechanical
characteristics after drop down
with 100g upon rubber block）
工程图纸：
产品实物照片：
测试参数：
1、RETURN LOSS
2.V.S.W.R:
3.SMITH CHART:。