外贸QC检验验货中英文报告
出货检验报告中英文模板
环保要求
是否符合ROHS标准：
ROHS compliance Is in line with the ROHS standard
检验结果（Inspection result）：
□合格PASS
备注（remark）
核准 （approval）：
□ 是（YES ） 确认（check）：
□不合格FAIL
□ 否（NO）
客户 Customer: 出货数量 Shipping Qty : ENA条码
ENA Barcode：
正唛（Main mark）：
客户唛头信息 The customer shipping
mark information
出货检验报告
Outgoing inspection rep
品名
料号
Description : 抽样数
检验 员
□特采MRB
ห้องสมุดไป่ตู้
彩盒内部产品、配件及内部包材摆放是否正 确 graphic carton put internal products, accessories and packaging are correct
□ 抽检 spot check
不良数 defect quantity
贴纸/说明书 stickers/
specification
包装辅材 Packaging material and auxiliary material
纸卡、珍珠棉、PE袋、泡壳等，外观及尺寸 是否符合规格要求 Paper card, pearl cotton, PE bag, blister Package,and so forth, the appearance and size is in accordance with the specification requirements
英文版验货报告
QC验货报告格式模板-中英文
ytQ redrO
�片图构结部内品产� erutcu rtS rennI tcudorP.6
�片图观外品产�
ecnaraeppA tcudorP.5
�片图件附�gnikcaP nI seirosseccA.4
�片图装包外品产� gnikcaP tcudorP.3
�见意 CQ�
:sk rameR CQ �
etaD hsiniF yaM ***量数 成完箱纸 etaD hsiniF yaM ***量数 成完装包 etaD hsiniF yaM �例 比� %0 �例 比� %001 �列 比� %07
nosaeR deyaleD
etaD yrevileD deriuqeR ***数箱总 *** 量数单订
�名签商应供� �erutangiS reilppuS
�名签员货验� :erutangiS rotcepsnI ***议建 CQ :noitsegguS CQ
0
8
0
锈生钉螺
lacitirC
0 0
roniM
4 6
rojaM
0 0
�节细良不�liateD nI stcefeD ***注备 CQ �果结终最�
)他其(
srehtO.7
)片图件部良不(
stnenopmoC evitcefeD.6
***用费验重 ***款罚误延 ***注备 CQ :skrameR CQ ***因原误延 ***数次误延 yaleD fo semiT
emiT deyaleD ***号单订 .oN O/P
�节细片图货验�
tnemesrubmieR noitcepsnI-eR tnemesrubmieR yaleD ***期 ***期日 ***期 日 成 完 计 预 箱 纸 成完计预装包 日 成 完 计 预 品 成
外贸QC 检验报告格式
TPO
GZO
SALES：
S/C DATE：
Re-inspection _______ INSPECTION DATE： SUPPLIER： SHIPPING DATE： REPORT REF. NO. ：
THIRD PARTY CO-INSPECTION： NIL NEED _____________ ( SEAL SAMPLE YES NO)
OVERALL INSPECTION RESULT Rejected
Pending
Inspect
Accept Reject N/A
Remarks
Drop test(master carton/inner box) Bar code no. (EAN UPC DUN) Marking/Label(main/composition/size/price) Brand/Logo
Language printed(artwork/manual) Warnings Safety requirement(Food Safety/Lead Cadmium testing/Salt spray) Country of origin
Germany GY DIY Chain store Far East Buying Office Inspection Report
INSPECTION TYPE： INSPECTION LOCATION： CUSTOMER： S/C NO.： INSPECTOR：
Final
During ______ %
Globus Item Supplier
No..
Item No
Order Q’ty
Release Q’ty
Unit in Unit in NW GW
服装英文验货报告范文
服装英文验货报告范文Clothing Quality Inspection Report.1. Introduction.This comprehensive quality inspection report aims to assess the conformity and quality of the clothing items under review. The inspection covers various aspects of the garments, including material, stitching, fit, and overall appearance. The report is conducted to ensure that the products meet the specified requirements and standards.2. Material Evaluation.The clothing items were inspected for the type of material used. The fabric was checked for its thickness, texture, and colorfastness. The inspection revealed that the majority of the items were made from high-quality cotton blend, which provided both comfort and durability. However, a few items showed slight variations incolorfastness, which might affect their longevity.3. Stitching Quality.The stitching was evaluated for its uniformity, tightness, and overall durability. The inspection teamnoted that the majority of the garments had neatly done stitching, with no loose threads or uneven patches. However, a few garments exhibited minor stitching issues, such as skipped stitches or uneven thread tension, which could potentially affect their durability.4. Fit and Design.The fit and design of the clothing items were also inspected. The items were measured to ensure they adheredto the specified size chart. Additionally, the cut and styling of the garments were assessed for their attractiveness and comfort. Overall, the inspectionrevealed that the majority of the items fitted well andwere designed to complement a wide range of body types.5. Packaging and Labeling.The packaging and labeling of the clothing items were also inspected. The items were checked for proper packaging, ensuring they were protected during transit. Additionally, the labels were inspected for accuracy, including size, material, and care instructions. The inspection revealedthat the packaging and labeling were generally satisfactory, with minor inconsistencies noted in a few cases.6. Conclusion.Overall, the clothing items under review exhibited good quality and conformed to the specified requirements. However, minor issues were identified in a few areas, such as colorfastness and stitching quality. It is recommended that these issues be addressed to ensure the highestquality standards are maintained. Additionally, attention should be paid to ensuring consistency in packaging and labeling to enhance the overall customer experience.7. Recommendations.To further improve the quality of the clothing items, the following recommendations are suggested:Conduct regular quality checks throughout the production process to identify and address any issues early on.Invest in high-quality materials to ensure durability and colorfastness.Train stitchers regularly to maintain consistent stitching quality.Implement strict quality control measures during packaging and labeling to ensure accuracy and consistency.By implementing these recommendations, it is expected that the quality of the clothing items will be further enhanced, providing a superior customer experience.8. Future Outlook.With the continuous evolution of fashion trends and consumer preferences, it is crucial to stay updated with the latest industry standards and best practices. The manufacturer should aim to innovate and improve their products to meet the changing needs of the market. By focusing on quality, comfort, and style, the manufacturer can ensure that their clothing items remain competitive in the market and continue to satisfy their customers.In conclusion, this quality inspection report provides a detailed assessment of the clothing items under review. While the majority of the items exhibited good quality, minor issues were identified that need to be addressed. By implementing the recommended measures, the manufacturer can ensure the highest quality standards are maintained, providing a superior customer experience.。
英文版验货报告
Total No.of inspected pieces: Max.Number of allowed: Total No. of faults: Result-AQL 2.5 Remarks/Comments □ Accept □ Reject
No. of SKU's rejected For measurement □
□ □ □ □
Pre-production Sample
Inspection level
□Available
Color/Size
□Not Abailable
Ⅰ/Ⅱ
2.Measurement Check (see attached sheet) All measurement within tolerances Major on area: 2.1.List of Measurement discrepancies Problem Description Size/Color □Yes □No
Note:
(A)This inspection was carried out by Q.C.Personal on a random sampling basis to best of their knowledge and ability (B)This report reflects the results of a random inspection and does not relieve the manufactures from their contractual responsibilitics to provide product of an acceptable quality and accuracy
***时装（深圳）有限公司
出货检验报告 -中英文
Test equipment
Defect
Results
Remark
NG
OK
Unacceptable
4
Aging Test
Under the punch of agingmachine﹥4H
Aging Machine
5
Puncture Test
Under the punch of aging machine﹥4H
Check it up with BOM
Calipers
Content/stickiness/damage of the tags
Check it up with data
Visual Inspection
Package
Check it up with order
Visual Inspection
3
Ontology
color/appearance/cleanliness
Visual Inspection
Visual Inspection
Seize of the lamp
Check it up with BOM
Calipers
二、Test
No.
Inspection Items
Inspection Method & Standard
Test equipment
Defect
Results
Remark
NG
OK
Unacceptable
1
Outside Carton
Damage/ Dirt
Visual Inspection
Visual Inspection
出货检验报告--中英文版.docx
ActualParameter
Test equipment
Defect
Results
Remark
NG
OK
Unacceptable
4
Aging Test
Under the punch of agingmachine﹥4H
Aging Machine
客户名称
定单号
产品名称
产品规格
生产总数
结论：□NG□OK
Inspection Standard
抽样检验指导书
质量要求：致命瑕疵（CR:0)严重瑕疵（MA:0.4）轻微瑕疵（MI:1.0）
一、外观尺寸检验
序号
部位
检验内容
检查方法
检验设备
缺点别
检验结果
说明
NG
OK
不接受
1
外箱
1.1外箱表面破损、脏污
目测
8
角度测试
积分球测试与客户所须一致
积分球
检验员QC：
精品策划书
5
Puncture Test
Under the punch of aging machine﹥4H
Aging Machine
6
Power
The use of power meter+—1W
Power Meter
6
ColorTemperature
The same as customer’s requirement
目测
1.2外箱的长*宽*高
与BOM表核对
卷尺
1.3贴纸内容、粘性、破损
与数据检验
目测
QR-QC-03出货检验报告(中英文)
标准/规格 Inspection Standard
1#
2#3#ຫໍສະໝຸດ 4#5#6#
7#
OK □ NG □
8#
检验工具
判定
Meas.Tool Decision
尺寸检验 Dimensional inspection
功能/可靠性 测试
Functional/ reliability
外观无机械损伤、变形、龟裂、松弛、油污等现象 3 外观（Appearance） No mechanical damage、transformation, cracking、loosing and
oil fouling on the facade.
4
标识（Product logo card）
填写产品标识卡应字迹工整清晰，产品与标签相符 The product logo card must be written neatly and clearly,The product
testing
检验依据 Inspection Basis
检验工具代码 Verification tool code
检验结论 Conclusion
品质部 Quality Department
□合格样品Standard sample □作业指导书SOP
□检验规范SIP
□BOM单
A 卡尺 B 电测机 C 投影仪 D 电脑 E 卷尺 F 千分尺 G 2.5次元 H 高度规 I 其他
1 包装（Packing） 印刷字体应清晰、内容齐全．Clear printing and full content.
检验日期 Date of Inspection
外贸QC验货报告
签名：autograph：
主唛/侧唛 main mark/sidemark
包装袋印刷/packing bag printing
2 服装组成/garmentcomp.
面料/outshell
里料/lining
辅料/accessory
领标/collar lable
水洗标/swin-in lable
挂卡/hangtag
印刷图案/标志/logo
福州市侨威防水服装有限公司
Fuzhou Qiaowei clothing co., LTD
验货检验报告/Finished Goods Inspection Report
订
单
号:
产品名
ord
称:prod
er
uct
num
name.
ber
.
订
供应
单
商:supp
款
交货
验 货 日 期: Inp ect ion dat e 从 ： 年 月 日 年 月 日
处理结果：dispose result □通过/PASS
验 货
品质部意见：quality view
□需改善/improve
□通不过/NO Pass
工厂负责人/Person in charge：
公司内部填写：interior fillout
业务部意见：sales department
签名：autograph：
尺寸/size
3 做工/workmanship
裁剪/cutting
车缝/sewing
压合/heatheal
钉扣/button
缺陷说明/defect explain
判定 判定 OK NG
外贸QC检验验货中英文报告
外贸QC检验验货中英文报告Inspection Report for Quality Control and Goods Inspectionfor Foreign Trade日期：2024年X月X日 Date: X Month X, 2024供应商：XXX有限公司 Supplier: XXX Co., Ltd.采购商：XXX贸易有限公司 Buyer: XXX Trading Co., Ltd.验货地点：XXXXX Inspection Location: XXXXX产品名称：XXXXX Product Name: XXXXX产品数量：XXXXX Quantity: XXXXX1. 检验目的 Purpose of Inspection本次验货旨在核对供应商所提供的产品与采购商的要求是否相符，并对产品的质量状况进行评估。
The purpose of this inspection is to verify whether the products provided by the supplier are in accordance with therequirements of the buyer and to evaluate the quality conditionof the products.2. 检验标准 Inspection Standards本次验货的标准符合采购合同中约定的质量标准、规格和要求。
The standards for this inspection conform to the quality standards, specifications, and requirements agreed upon in the purchase contract.3. 检验项目 Inspection Items3.1外观检查：通过对产品的外观进行检查，确保产品外观无明显缺陷或损伤。
外贸QC 检验报告格式
MIL-STD-105E single sampling plans general inspection Leቤተ መጻሕፍቲ ባይዱel II for normal inspection Acceptable Quality Level（AQL）for: Critical: 0.01, Major: , Minor: 。
Critical
----
Major
Minor
Inspection comments and action required:
Found defects
Critical Major Minor
Result
Accepted
Supplier（Signature）: Inspector: Approved by:
OVERALL INSPECTION RESULT Rejected
Pending
Inspected date: Approved date:
2
Germany GY DIY Chain store Far East Buying Office Inspection Report
INSPECTION TYPE:
Final During ______ %
INSPECTION LOCATION: TPO GZO
Re-inspection _______ INSPECTION DATE:
Shipping sample:
Pc
Inspection checklist:
Accept Reject N/A
Remarks
Style/color (Finishing) Appearance/Dimension/ Construction /Material/ Package Shipping mark(front/side/inner) Drop test(master carton/inner box) Ba.cod.no.(EA.UP.DUN)
中英文对照版出货检验报告
客户 Customer: 出货数量 Shipping Qty : ENA条码 ENA Barcode： 正唛（Main mark）： 客户唛头信息 The customer shipping mark information 品名 Description : 抽样数 Sampling Size: 料号 P/N: 出货日期 Date: 检验日期 Date： 侧唛（side mark）：
检验区域checkingdomain检验项目inspectionitem有无脏污破损变形等等封箱是否正确presenceofdirtbreakagedeformationandsoforthsealingiscorrect箱体印刷内容及印刷品质是否符合要求boxprintingandprintingqualityisinlinewiththe贴纸粘贴位置是否正确stickerpastelocationis彩盒graphiccarton外箱及中箱堆叠摆放是否正确outerboxandinnerboxstackputiscorrect有无脏污破损变形等彩盒封合是否正确presenceofdirtbreakagedeformationandsoforthgraphiccartonsealingiscorrect产品与配件的数量及匹配确认thenumberofproductsandaccessoriesmatchingandconfirmation产品与配件的外观及尺寸是否符合要求theappearanceoftheproductsandaccessoriesandsizeisinaccordancewiththerequirements确认check
缺点 flaw 允收水准（AQL） 收/退（AC/RE） 缺点程度 CRI/MAJ/MIN
QC查货中英文
中 英 文 尺 寸 问 题
A.1 OFF SPECIFICATION A.2 MIS-SIED A.3 OUT OF TOLERANCE C.1 LOOSE & UNTRIMMED THREADS C.2 HOLES/DROPPED NEEDLE C.3 POCKET DEFFCTS C.4 OVRUNDERPRESSED C.5 SEAMS/STITCHES/LINKING C.6 MARKS/STAINS C.7 BROKEN STITCHES C.8 RUN OFF STITCHES C.9 WAVY/UNEVEN STITCHES C.10 SKIPPED STITCHES C.11 TWISTSEAM F.1 SHRINKAGE F.2 COLOR FASTNESS F.3 PRINTING DEFECTS F.4 FABRIC/YARN DEFECTS F.5 COLOR OFF STANDARD F.6 SHADING BETWEEN GARMENT F.7 SHADING WITHIN GARMENT F.8 HAND FEEL F.9 WEIGHT G.1 PACKAGING G.2 PRESENTATION G.3 PRETICKETS G.4 NOLABREPORT T.1 ZIPPERS T.2 BUTTONS/SNAPS T.3 ELASTIC T.4 INTERLINING T.5 SHOULDER PADS T.6 BELTS T.7 LABELS T.8 LINING T.9 TRIM COLOR T.10 EMBROIDERY T.11 BAD SMELL T.12 COLOR CODE OTHERS 尺寸不对 错 借口次品 烫工度不足 缝口 印/污渍 超针/线 落坑 线路起波浪不平衡 跳线 钮骨 缩水不平均 脱色 印花次品 布次 色光不对 衣服对衣服色差 一件成衣有色差 手感 重量 包装错 外观 价钱牌 测试报告 拉链 钮/急钮 橡筋 朴布 肩朴/棉 腰带 唛头 里布 配色料 绣花 异味/怪味 色差 其他
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
报告号：report NO.产品名称:product name.客户:client.
供应商:supplier.
订单号:order number.订单数量:order quantity.
产品规格:product standard.
验货日期:Inpection date 从： 年 月 日 年 月 日
123459101112验货/QC Signature：
AC/RE
MI=0.65
AC/RE
要求检验步骤、项目/Request inspection procedures and projects 缺陷说明/defect explain
AQ-QF-QC0001
严重缺陷serious defects 主要缺陷/Major defects 次要缺陷/Minor
defct
判定OK
判定NG
公司内部填写：interior fillout
品质部意见：quality view
签名：autograph：
业务部意见：sales department
签名：autograph：
处理结果：dispose result
□通过/PASS □需改善/improve
□通不过/NO Pass
厂商负责人/Person in charge：
数量不对/quantity wrong 可靠性试验/reliability test
缺陷合计/Total amount of defects 外观检查/appearance inspection
特性测试/characteristic test 包装不符/variation in packing 尺寸规格/dimensions
产品单重/Product single heavy 缺少配件/lack of parts
东莞冠承精密塑胶五金有限公司
DongGuan GuanCheng Precision Plastic Maunfacturing Co.,Ltd
验货检验报告/Finished Goods Inspection Report
订单核对/indent check 抽样标准
依据MIL-STD-105E Ⅱ 单次抽样表
MA=0.65。