电脑经常出现的英文出错提示的翻译3

  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

(开机错误代码)检查范围及解决方法

Symptom / Error (开机错误代码)FRU / Action in Sequence

(检查范围及解决方法)

10X

101: Interrupt failure;(中断故障)

102: Timer failure;(计时器故障)

103: Timer interrupt failure;(计时器中断故障)

104: Protected mode failure;(保护模式故障)

105: Last 8042 command not accepted;

107: NMI test failure;(NMI 测试失败)

108: Timer bus test failure.

109: Low meg-chip select test. 1. System board. (主板问题)

110

(Planar parity.) (内存奇偶校验出错)1. Go to Memory Checkout

2. DIMM card.

3. Detach the expansion unit if it is attached to the computer.

4. System board.

111

(I/O parity.) 1. Go to Memory Checkout

2. Expansion unit or port replicator.

3. System board.

11XX

1101: Serial_A test failure.(A 串行口测试失败)1. Serial device (串行设备)

2. Communication cable (相关通讯电缆)

3. System board (主板)

12XX

1201: Serial_B test failure.(B 串行口测试失败)1. System board (infrared) (检查主板:红外线口)

158

(Hard disk password was not set even though the supervisor password is set.) (超级用户密码已设,但硬盘密码没有设置)1. Set the password for hard disk drive.

(设置硬盘密码)

159

(Hard disk password is not set the same as the supervisor password.) (硬盘密码与超级用户密码不一样)1. Set the correct password for hard disk drive.(设置正确的硬盘密码)161

(Dead battery.) (CMOS 电池不行)1. Go to Checking the Backup Battery

2. Backup battery.(CMOS 备份电池,在内存插槽旁边)

3. System board. (主板)

163

(Time and date were not set.) (系统时间没有设好或混乱)1. Set time and date.(设置正确的系统时间)

2. System board. (主板问题)

173

(Configuration data was lost.) (CMOS 设备配置信息丢失)1. Select OK in the error screen; then set the time and date.

(在开机ERROR 画面上按OK,然后设置系统时间)

2. Backup battery. (CMOS 电池需要更换)

3. System board. (主板问题)

174

(Configuration error: Perform Checking the Installed Devices List before changing any FRUs.) 1. Check device configuration.

2. Hard disk drive assembly.

3. System board.

175, 177, 178

175: EEPROM CRC #1 error.

177: Supervisor password check sum error.

178: EEPROM is not functional. 1. System board. (检查主板)

17XX

1701: Hard disk controller failure. (硬盘控制器故障)

1780, 1790: Hard disk 0 error. (主硬盘有问题)

1781, 1791: Hard disk 1 error.(从硬盘有问题)1. Hard disk drive (检查硬盘)

2. System board (检查主板)

183

(Incorrect password entered at the supervisor password prompt.) (超级用户开机密码不对)1. Have the user examine the password.

(请用户检查密码)

184

(Power-on password check sum error.) (Power-on 密码有误)1. Reset the power-on password in Easy-Setup.

(重设Power-on 密码)

185

(The startup sequence is not valid. Suspect that power was off when the startup sequence was being updated.) (系统启动顺序无效,怀疑是更新启动顺序时电源关掉)1. Reset the startup sequence in Easy-Setup.

(在Easy-Setup 重设启动顺序)

186 1. System board. (检查主板)

190

(A depleted battery pack was installed when the power was on.)

(开机时,机内笔记本电池已快耗尽了)1. Go to Checking the Battery Pack.

(更换机内笔记本电池)

191XX

(PM initialization error.) (PM 初始化错误)1. System board. (检查主板)

192

(Fan error.) (CPU 散热风扇故障)1. Measure the voltage of the backup battery. If the voltage is not correct, replace the backup battery.

(检查CMOS 备份电池的电压,电压不行时更换电池)

2. Fan (要更换CPU风扇)

相关文档
最新文档