402030聚合物锂电池

合集下载

ATL 锂离子聚合物软包电芯化成工艺

截止电流是0.01C mA，限时120min；
10)停止
4.电池初检
4.1电池在续充后先根椐电池的容量进行分容，分容标准参见各型号电池的分级标准；
4.2对于续充工序不良品（B级、C级品）经品质部确认后直接入库；
4.3每批电池抽取当批电池一万-20000pcs不等测试容量、内阻、尺寸（厚度、长度、宽度）分布图；
2.1静置：电池预充后要静置，静置时气囊朝上竖直放置，必须根据电池的型号按规定时间静置，之后取出来进行抽气及二次封装，封装好后进行切、折边，静置时间不超过48h；
2.21压芯，自动热冷压进行压芯处理，保持电池平整完整。
2.3抽气：根据电池的型号严格控制抽气时电解液的损失量；
2.4二次封装设备设置参数：（保证包装膜热封牢固，拉力检测合格，熔胶良好）
6.10续充上夹具方式按PE文件进行，试产电芯可按项目负责人要求进行。
6.11对预充、二次封装、续充、初检、复检各工序产生的无电压、内阻无穷大、短路以及外观严重缺陷的电芯做报废处理。
6.12电芯在注液后的静置以及预充后的静置时间:最短时间控制按各型号工艺文件,最长时间按此工艺文件规定，特殊情况下（如停电等）超过规定时间，作让步放行生产。
6.5整个作业过程，尤其是二次封装时，小心电池短路并注意生产安全；
6.7触拿电池应戴手指套或手套，以保护电池外观不良影响；
6.8对化成工序电芯静置的环境温度，其它工艺若与此有冲突之处，以此份工艺为准。
6.9二次封装后的电池用专用的有机玻璃板及燕尾夹将电池夹住后，进行续充，注意保证有机玻璃板的表面平滑无杂质，燕尾夹的松紧度大体一致。
6.1容量大于2000mAh的电池不适用此工艺，如工艺文件有具体化成要求的，按照其要求执行；
6.2电池正负极与化成夹具极性对应并保证接触良好，上线时要注意极性夹反，接触不良等现象；

甲氧基聚乙二醇丙烯酸酯在全固态电池中的应用

摘要固态聚合物电解质作为全固态聚合物锂离子电池的核心材料，目前面临的主要难点是电导率低、电化学稳定性差等题。

基于聚合物电解质的锂离子传输机理，采用甲氧基聚乙二醇丙烯酸酯和聚氧化乙烯制备出多支链固态聚合物电解质(PMEA@SSE)，并以聚氧化乙烯固态电解质(PEO@SSE)作为对比样，对PMEA@SSE进行了傅里叶变换红外光谱仪(FT-IR)、电化学阻抗谱(EIS)、线性扫描伏安法(LSV)、扫描电子显微镜(SEM)、X射线能谱(EDS)、X射线衍射(XRD)以及全固态电池循环等测试和分析。

结果表明，与PEO@SSE相比，PMEA@SSE具有更高的离子电导率(0.13 mS/cm vs.0.018 mS/cm，测试温度30 ℃)，更宽的电化学窗口(4.2 V vs. 3.8 V)，以及更好的全固态电池循环稳定性(77次vs.31次循环，80%容量保持率，60 ℃下测试，0.1 C倍率，3.0～4.2 V 电压范围)。

本工作表明，甲氧基聚乙二醇丙烯酸酯部分替代聚氧化乙烯是一种改进聚氧化乙烯这一经典固态聚合物电解质材料的可行策略，将为后续固态聚合物电解质新材料的开发提供有益参考。

关键词固态聚合物电解质；甲氧基聚乙二醇丙烯酸酯；固态电池固态锂离子电池作为最有希望量产的下一代锂离子电池，受到国内外广泛关注。

固态锂离子电池的核心材料是固态电解质(solid state electrolyte，SSE)，其按照结构可分为氧化物固态电解质、硫化物固态电解质和聚合物固态电解质。

氧化物固态电解质存在电导率低、界面阻抗大等问题；硫化物固态电解质虽然电导率高，但存在成本高、对环境敏感等缺点；固态聚合物电解质具有易加工、界面接触好、与现有锂离子电池生产体系兼容性高等优点，然而，固态聚合物电解质也存在离子电导率低和电化学稳定性差等问题。

因此，提高聚合物电解质的离子电导率并拓宽其电化学窗口，是目前固态聚合物电解质的重点发展方向。

聚合物锂离子电池产品规格书说明书

Product Specification for Li-ion Polymer Battery 聚合物锂离子电池产品规格书Model电芯型号: 702427(PCM)惠州基安比新能源有限公司HUIZHOU MARKYN NEW ENERGY CO.,LTD.电话: ************传真: ************TEL: ************ FAX : ************SPECIFICATION AMENDMENT RECORDS规格书变更记录1. Scope适用范围：This document describes the Product Specification of the Li-Polymer Rechargeable Battery supplied by Huizhou Markyn New Energy Co., LTD.本规格书描述了惠州基安比新能源有限公司的可充电锂离子聚合物电池的产品性能指标。

2. Description 说明2.1 Description: Li-Polymer Battery类型：锂离子聚合物电池2.2 Model: 702427型号：7024273. Specification产品规格4. Battery Cell Performance Criteria 电芯性能标准4.1 Standard testing environment标准测试环境Unless specifically stated otherwise, tests must be done within one month of delivery and the number of charging-recharging cycles is fewer than 5. The following is test conditions:Test conditions:Ambient Temperature：23ºC ± 2ºCAmbient Humidity：65±20%RH除非另有说明，测试应在电池出货的1个月内进行，且充放电循环的次数少于5次。

锂离子电池产品规格书 MLP502030 250mAh 3.7V说明书

History of specification规格书修订记录Date Contents Remarks 2018-05-12First issue A0Content/目录1.Scope/适用范围Page42.Cell Specification/电芯规格说明Page4/53.Battery/Cell performance test Criteria/电池性能标准Page6 3.1Appearance inspection by visual/外观目测Page6 3.2Environmental test condition/外界环境条件Page6 3.3Electrical characteristics/电气特性Page6 3.4Mechanical characteristics/机械特性Page73.5Safety performance/安全性能Page7/84.Cell initial Dimensions/电芯初始尺寸Page84.2Picture of assembled battery组合电池图5.Protection Circuit保护电路5.1PCM parameter PCM参数6.Circuit topology Drawing and PIN Explanation电路布线图和焊盘说明6.1PCM BOM保护板物料清单6.2Assembled cell parameters包装后电芯组参数附录Page9 Page9 Page9 Page10 Page10 Page101.Scope/适用范围The specification shall be applied to Li-ion Polymer rechargeable battery pack of MLP502030 250mAh3.7V,which is manufactured.本规格书适用于公司生产的MLP502030250mAh3.7V可充电聚合物锂离子电池.2.Cell Specification/电芯产品规格No.Item项目Specification性能1Rated Capacity额定容量250mAh,0.2C discharging2Minimum Capacity最小容量250mAh,0.2C discharging3Normal Voltage标称电压3.70V4O.C.V出厂电压 3.80-4.2V5Charge Ending Voltage充电截止电压4.20±0.03V6Discharge Ending Voltage放电截止电压3.0V7Standard charging method标准充电方式0.5C constant current charge to 4.2V,then constantvoltage4.2V charge till charged current declines to≤0.01C,0℃～45℃8Charge current充电电流Standard charge:0.2CRapid charge:1.0C9charging Time充电时间Standard charge:5.5～6.5hRapid charge:1.5～2.5h10Max.Charging Current最大充电电流1.0C(5℃～+45℃)11Standard dischargingCurrent标准放电电流0.2C constant current discharge to3.0V.10℃～+60℃12Max.Discharging Current最大放电电流1.0C(10℃～+60℃)13Operating environment工作环境Charging:0℃-45℃,65%±25%RHDischarging:10℃-60℃,65%±25%RH14Cell Impedance单电芯内阻＜140mohm，(4.2V AC1KHz measured)15Dimension of Single Cell单电芯尺寸Thickness Max5.0mmWidth Max20.5mmHeight Max30.5mm3.Picture of single cell 单体电芯图Fig.(1)The Dimension of Single Cell图(1)单体电池尺寸图厚度T 宽度W 长度L L1W1E 5.0±0.120.0±0.530.0±0.56.5±1.52.0-3.07.0±1.5UNIT 单位：MM4.Picture of assembled battery组合电池图Fig.(2)The Dimension of Assembled Battery图(2)组合电池外形尺寸图厚度T 宽度W 长度L 线径Ø线型插头型号5.0±0.120.0±1.033.0±1.00.9UL1007/24#XH2.54-2P备注：UNIT 单位：MM5.产品规格及电气参数Product Specification and Electrical Parameters序号Item项目Specification性能1Assembled Mode组合方式1P2Normal Capacity标称容量≥250mAh,0.2C discharging3Normal Voltage标称电压3.7V4Impedance成品内阻＜240mohm，(100%charge AC1KHz measured)5Assembly Dimension装配尺寸Thickness Max5.1mmWidth Max21.0mmHeight Max33.0mm4.Battery/Cell performance test Criteria/电池性能标准4.1Appearance inspection by visual/外观目测There shall be no such defect as rust,leakage,which may adversely affect commercial value of battery.电池外观应没有锈渍、污渍、漏液等影响商业价值的缺陷存在。

聚合物锂电池规格表

版本制定日期页次1222441150140180 3.7 3.5±0.52263030200190130 3.74±1330153310095300 3.72±14301550170160200 3.7 3.4±0.55302029140130200 3.7 2.8±0.56302025110100270 3.7 2.8±0.57302040190185140 3.7 3.8±0.58302222105100300 3.7 2.1±0.59302236190190150 3.7 3.8±0.510302248260260100 3.7 5.2±0.511302425150140200 3.73±0.5123007457070380 3.7 1.4±0.51330074565380 3.7 1.3±0.514302323120120250 3.7 2.4±0.515302535210200140 3.7 4.2±0.516302540230230120 3.7 4.6±0.517302626150140200 3.73±118303040310310100 3.7 6.2±0.51930304840040090 3.78±12030345050050070 3.710±12130346060060060 3.712±12233344850070 3.710±12333346265065060 3.713±124303535310310100 3.7 6.2±12530404550049070 3.710±12630436068068045 3.713.6±1273245100140060 3.728±1283512205045450 3.7 1.5±0.5293514279090270 3.7 1.8±0.530352025********* 3.7 2.6±0.531353035********* 3.7 6.2±1323565852000195040 3.738±13336132070350 3.7 1.4±13437515295095045 3.719±135381429130240 3.7 2.6±13638345065065060 3.713±13.20-0.3 *45.0+0.5-0.5 *100.5+0.5-0.53.80.2-0.3 *14.0+0.5-0.5 *29.0+0.5-0.5A 2009-12-09PAGE 1 OF 63.90-0.3 *13.0+0.5-0.5 *20.0+0.5-0.53.80-0.3 *34.0+0.5-0.5 *50.0+0.5-0.53.50-0.3 *14.0+0.5-0.5 *27.0+0.5-0.53.50-0.3 *65.0+0.5-0.5 *85.0+0.5-0.53.10-0.3 *34.0+0.5-0.5 *50.0+0.5-0.53.00-0.3 *34.0+0.5-0.5 *59.0+0.5-0.53.30-0.3 *34.0+0.5-0.5 *61.0+0.5-0.53.10-0.3 *40.0+0.5-0.5 *45.0+0-0.5深圳宝嘉能源有限公司SHENZHEN BAOJIA BATTERY TECHNOLOGY CO., LTD.尺寸(mm)序号最小容量（mAh） 3.70-0.3 *51.0+0.5-0.5 *52.0+0.5-0.53.10-0.3 *30.0+0.5-0.5 *48.0+0.5-0.5量产规格表3.10-0.3 *43.0+0.5-0.5 *60.0+0.5-0.53.50-0.3 *20.0+0.5-0.5 *25.0+0.5-0.53.50-0.3 *30.0+0.5-0.5 *35.0+0.5-0.5内阻（mΩ）标称容量（mAh）型号 3.10-0.3 *15.0+0.5-0.5 *50.0+0.5-0.53.10-0.3 *20.0+0.5-0.5 *29.0+0.5-0.53.10-0.3 *20.0+0.5-0.5 *25.0+0.5-0.53.10.1-0.3 *20.0+0.5-0.5 *40.0+0.5-0.53.00.3-0.3 *7.0+1.5-0.5 *45.0+0.5-0.53.10-0.3 *25.0+0.5-0.5 *35.0+0.5-0.53.10-0.3 *22.0+0.5-0.5 *36.0+0.5-0.5电压（V）重量（g)厚×宽×高2.750-0.3 *30.0+0.5-0.5 *30.0+0.5-0.52.20-0.3 *24.0+0.5-0.5 *41.0+0.5-0.53.10-0.3 *30.0+0.5-0.5 *40.0+0.5-0.53.10-0.3 *15.0+0.5-0.5 *33.0+0.5-0.53.10-0.3 *35.0+0.5-0.5 *35.0+0.5-0.53.10-0.3 *22.0+0.5-0.5 *48.0+0.5-0.53.10-0.3 *25.0+0.5-0.5 *40.0+0.5-0.53.10-0.3 *26.0+0.5-0.5 *26.0+0.5-0.53.10.1-0.3 *23.0+0.5-0.5 *23.0+0.5-0.53.50-0.3 *12.0+0.5-0.5 *20.0+0.5-0.53.30-0.3 *34.0+0.5-0.5 *48+0.5-0.53.10-0.3 *22.0+0.5-0.5 *22.0+0.5-0.53.20-0.3 *24.0+0.5-0.5 *25.0+0.5-0.53.00.3-0.3 *7.0+1.0-0.5 *45.0+0.5-0.5版本制定日期页次3738364155055070 3.711±13838112580330 3.7 1.6±13940103080330 3.7 1.5±0.5404011174040600 3.7 1.5±0.5414011206060430 3.72±0.5424012258075330 3.72±0.543401229100100300 3.72±0.544401235120120200 3.7 2.4±0.545401429120120200 3.7 2.4±0.546401445200200130 3.74±0.547401525110240 3.7 2.2±0.548401730160160180 3.7 3.2±0.549402020110110240 3.7 2.2±0.550402023130120200 3.7 2.6±0.551402025150145180 3.73±0.552402030190190130 3.7 3.8±0.553402035220220130 3.7 4.4±0.554402040280260100 3.7 5.6±155402535300300100 3.76±15640254034034090 3.7 6.8±157402626210210130 3.7 4.2±15840304046046070 3.79.2±15940304858058060 3.711.6±16040344050050070 3.710±16140345068068060 3.713.6±16240471082000200040 3.738±1634215155550420 3.7 1.1±0.5644315178080350 3.7 1.6±0.5654411206060380 3.7 1.2±0.56645102780330 3.7 1.6±0.5674511154040500 3.71±0.5684511175050500 3.71±0.56945121760430 3.71±0.5704512207070350 3.7 1.8±0.571451225100100300 3.72±0.572451235130200 3.7 2.6±0.54.00-0.3 *15.0+0.5-0.5 *25.0+0.5-0.54.00-0.3 *12.0+0.5-0.5 *35.0+0.5-0.54.00-0.3 *14.0+0.5-0.5 *29.0+0.5-0.54.00-0.3 *12.0+0.5-0.5 *29.0+0.5-0.54.00-0.3 *11.0+0.0-0.5 *17.0+0.5-0.53.80-0.3 *11.0+1.0-0.5 *25+0.5-0.54.00-0.3 *10.0+0.7-0.5 *30+0.5-0.54.00-0.3 *20.0+0.5-0.5 *30.0+0.5-0.54.00-0.3 *12.0+0.5-0.5 *25.0+0.5-0.54.50-0.3 *12.0+0.5-0.5 *35.0+0.5-0.54.00-0.3 *34.0+0.5-0.5 *40.0+0.5-0.54.00-0.3 *47.0+0.5-0.5 *108.0+0.5-0.54.00-0.3 *11.0+0.0-0.5 *20.0+0.5-0.5厚×宽×高内阻（mΩ）最小容量（mAh）A 2009-12-09PAGE 2 OF 6电压（V）重量（g)量产规格表序号型号标称容量（mAh） 4.00-0.3 *20.0+0.5-0.5 *40.0+0.5-0.54.00-0.3 *34.0+0.5-0.5 *50.0+0.5-0.54.50-0.3 *12.0+0.5-0.5 *20.0+0.5-0.54.50-0.3 *10.0+0.5-0.5 *27.0+0.5-0.54.20-0.3 *15.0+0.5-0.5 *15.0+0.5-0.54.30.2-0.3 *15.0+0.5-0.5 *17.0+0.5-0.54.50-0.3 *11.0+0-0.5 *17.0+0.5-0.54.50-0.3 *12.0+0.5-0.5 *25.0+0.5-0.54.40-0.3 *11.0+0.5-0.5 *20.0+0.5-0.54.00-0.3 *25.0+0.5-0.5 *35.0+0.5-0.54.00.1-0.3 *26.0+0.5-0.5 *26.0+0.5-0.54.00-0.3 *30.0+0.5-0.5 *40.0+0.5-0.54.00-0.3 *30.0+0.5-0.5 *48.0+0.5-0.54.00-0.3 *25.0+0.5-0.5 *40.0+0.5-0.54.00-0.3 *20.0+0.5-0.5 *25.0+0.5-0.54.00-0.3 *20.0+0.5-0.5 *35.0+0.5-0.54.00-0.3 *17.0+0.5-0.5 *30.0+0.5-0.53.80-0.3 *36.0+0.5-0.5 *41.0+0.5-0.5深圳宝嘉能源有限公司SHENZHEN BAOJIA BATTERY TECHNOLOGY CO., LTD.尺寸(mm)4.50-0.3 *12.0+0.5-0.5 *17.0+0.5-0.54.50-0.3 *11.0+0.5-0.5 *15.0+0.5-0.54.00-0.3 *20.0+0.5-0.5 *20.0+0.5-0.54.00-0.3 *20.0+0.5-0.5 *23.0+0.5-0.54.00-0.3 *14.0+0.5-0.5 *45.0+0.5-0.57345151880330 3.7 1.6±0.574452030********* 3.7 4.4±0.575452626********* 3.7 4.6±0.57645283742042080 3.78.4±0.5774538751450145040 3.729±0.5784538851650165035 3.733±0.5794538901800180035 3.736±0.580459555150140180 3.73±0.5814540851700170035 3.734±1824550601400140045 3.728±1834555601700170045 3.734±1844562712250225045 3.743±185471630180170180 3.7 3.6±0.5864808184038550 3.71±0.387481135140140200 3.73±1884812208075330 3.7 1.6±0.589481520100300 3.72±0.590481525130125220 3.7 2.6±0.591482020130125220 3.7 2.6±0.592501230********* 3.7 2.6±0.593501235150150200 3.73±0.594501430150150200 3.73±0.595501621110240 2.296501730********* 3.7 4.2±0.597501735260260130 3.7 5.2±0.598502025200200140 3.74±0.599502030250250120 3.75±0.510050203530030090 3.76±110150273035035080 3.77±110250303038038080 3.77.6±110350313045045080 3.79±110450304058058070 3.711.6±110550304872072045 3.714.4±110650344065065060 3.713±11075035621100110045 3.722±11085037591100110045 3.722±15.00-0.3 *37.0+0.5-0.5 *59.0+0.5-0.55.00-0.3 *30.0+0.5-0.5 *40.0+0.5-0.55.00-0.3 *30.0+0.5-0.5 *48.0+0.5-0.54.50-0.3 *9.0+0.5-0.5 *55.0+0.5-0.54.50-0.3 *38.0+0.5-0.5 *90.0+1.0-0.54.50-0.3 *15.0+0.5-0.5 *18.0+0.5-0.55.00-0.3 *34.0+0.5-0.5 *40.0+0.5-0.54.70-0.3 *16.0+0.5-0.5 *30.0+0.5-0.54.50-0.3 *55.0+0.5-0.5 *60.0+0.5-0.54.50-0.3 *41.5+0.5-0.5 *85.0+0.5-0.55.00-0.3 *12.0+0.5-0.5 *29.0+0.5-0.55.00-0.3 *12.0+0.5-0.5 *35.0+0.5-0.55.00-0.3 *30.0+0.5-0.5 *30.0+0.5-0.55.00-0.3 *31.0+0.5-0.5 *30.0+0.5-0.54.50-0.3 *20.0+0.5-0.5 *30.0+0.5-0.54.80-0.3 *11.0+0.5-0.5 *34.0+0.5-0.54.50-0.3 *62.0+0.5-0.5 *71.0+0.5-0.54.50-0.3 *50.0+0.5-0.5 *60.0+0.5-0.54.50-0.3 *26.0+0.5-0.5 *26.0+0.5-0.55.80-0.3 *8.0+0.5-0.5 *20.0+0.5-0.54.80-0.3 *11.5.0+0.5-0.5 *20.0+0.5-0.54.80-0.3 *15.0+0.5-0.5 *25.0+0.5-0.54.80-0.3 *20.0+0.5-0.5 *20.0+0.5-0.5尺寸(mm)5.00.1-0.3 *17.0+0.5-0.5 *34.0+0.5-0.54.80-0.3 *15.0+0.5-0.5 *20.0+0.5-0.54.50-0.3 *28.0+0.5-0.5 *37.0+0.5-0.54.50-0.3 *38.0+0.5-0.5 *85.0+0.5-0.54.50-0.3 *38.0+0.5-0.5 *75.0+0.5-0.55.00-0.3 *14.0+0.5-0.5 *29.0+0.5-0.55.00-0.3 *17.0+0.5-0.5 *30.0+0.5-0.5量产规格表序号型号标称容量（mAh）内阻（mΩ）电压（V）重量（g)厚×宽×高最小容量（mAh） 5.00-0.3 *35.0+0.5-0.5 *62.0+0.5-0.55.00-0.3 *16.0+0.5-0.5 *21.0+0.5-0.55.00-0.3 *20.0+0.5-0.5 *30.0+0.5-0.55.00-0.3 *20.0+0.5-0.5 *25.0+0.5-0.55.00-0.3 *27.0+0.5-0.5 *30.0+0.5-0.55.00-0.3 *20.0+0.5-0.5 *35.0+0.5-0.51095055601800180045 3.736±11105050681800180045 3.736±1111522022160160180 3.7 3.2±0.511252353355055070 3.711±11135350601800180045 3.736±1114551235170170170 3.7 3.4±111555345095095045 3.719±1116653759150045 3.730±111770242635035090 3.77±111870253252052070 3.710.4±1119701223130130200 3.7 2.6±0.512070255080080050 3.716±0.51217036381000100050 3.720±0.51227315158070330 3.7 1.6±0.5123751126180180180 3.7 3.6±0.512480102580330 3.7 1.6±0.5125801223160160200 3.7 3.2±0.512690186297597545 3.719.5±11273196509090300 3.7 2.3±0.5128552020170170200 3.7 3.4±0.51295551521400140045 3.728±113056223640090 3.78±1131582030300300100 3.76±113258313454070 3.710.8±1133601220100100300 3.72±1134601230170170180 3.7 3.4±0.5135601235200200150 3.74±1136601630240240120 3.7 4.8±1137601735300300120 3.76±1138601045220220130 3.8 4.4±1139602025240240120 3.7 4.8±11406032100A 170045 3.734±11416032100200035 3.738±11426034481000100060 3.720±1143602020170170200 3.7 3.4±114460204045045070 3.79±15.50-0.3 *34.0+0.5-0.5 *50.0+0.5-0.55.00-0.3 *50.0+0.5-0.5 *68.0+0.5-0.57.50-0.3 *12.0+0.0-0.5 *26.5+0.5-0.56.00-0.3 *34.0+0.5-0.5 *48.0+0.5-0.57.60-0.3 *12.0+0.5-0.5 *23.5+0.5-0.57.00.0-0.3 *36.0+0.5-0.5 *38.0+0.5-0.57.00.2-0.3 *12.0+0.5-0.5 *23.0+0.5-0.56.00-0.3 *20.0+0.5-0.5 *40.0+0.5-0.57.00.0-0.3 *25.0+0.5-0.5 *49.0+0.5-0.57.00.2-0.3 *15.0+0.5-0.5 *15.0+0.5-0.5重量（g)7.00-0.3 *24.0+0.5-0.5 *26.0+0.5-0.5电压（V）6.00-0.3 *20.0+0.5-0.5 *20.0+0.5-0.5序号最小容量（mAh） 6.00-0.3 *17.0+0.5-0.5 *35.0+0.5-0.5尺寸(mm)6.00-0.3 *12.0+0.5-0.5 *20.0+0.5-0.56.00-0.3 *32.0+0.5-0.5 *101+0.5-0.56.00-0.3 *32.0+0.5-0.5 *101+0.5-0.55.50-0.3 *51.0+0.5-0.5 *52.0+0.5-0.5型号 5.80-0.3 *20.0+0.5-0.5 *30.0+0.5-0.65.50-0.3 *12.0+0.5-0.5 *35.0+0.5-0.58.00-0.3 *10.0+0.5-0.5 *25+0.5-0.56.50-0.3 *37.0+0.5-0.5 *59.0+1.0-0.57.00-0.3 *25.0+0.5-0.5 *32.0+0.5-0.5内阻（mΩ）标称容量（mAh） 5.00-0.3 *55.0+0.5-0.5 *60.0+0.5-0.5量产规格表5.80-0.3 *31.0+0.5-0.5 *34.0+0.5-0.6厚×宽×高6.00-0.3 *10.0+0.8-0.5 *45.0+0.5-0.65.60-0.3 *22.5+0.5-0.5 *36.5+0.5-0.53.10-0.3 *9.6+0.5-0.5 *47.5+0.5-0.56.00-0.3 *16.0+0.5-0.5 *30.0+0.5-0.55.50-0.3 *20.0+0.5-0.5 *20.0+0.5-0.56.00-0.3 *12.0+0.5-0.5 *30.0+0.5-0.56.00-0.3 *12.0+0.5-0.5 *35.0+0.5-0.56.00-0.3 *20.0+0.5-0.5 *25.0+0.5-0.59.00-0.3 *18.0+0.5-0.5 *62.5+0.5-0.55.20-0.3 *20.0+0.5-0.5 *22.0+0.5-0.55.20-0.3 *35.0+0.5-0.5 *33.0+0.5-0.55.30-0.3 *50.0+0.5-0.5 *60.0+0.5-0.5145602425300300100 3.76±114660253240090 3.78±114760304890090045 3.718±1148653475175045 3.735±11494012154545500 3.7 1.1±0.51502314204040500 3.7 1.1±0.51514011299090270 3.72±0.51526011207575350 3.7 1.8±0.51536534611250125045 3.724.5±0.51543010305050430 3.7 1.4±0.51553510153030670 3.71±0.5156302029130130200 3.7 3.1±0.5157701837420400100 3.78.5±0.51584539661150105045 3.723±0.51594440841600160035 3.730±0.5159803450H 1100110035 4.128±1160481417H 5555170 4.1 1.5±0.2161551417H/601417H 7070160 4.12±0.2162400922H 40163701719H 140 4.1±0.2164701417H 9090140 4.1 2.4±0.2165452030H 15015090 4.1 4.5±0.3166502030H 20020070 4.1 5.3±0.3167501225H 7070150 4.12±0.3168602035H 30030055 4.17.6±0.3169603048H 60060035 4.115.5±0.5170383040H 35035050 4.19±0.5171401220H 4545250 4.1 1.6±0.5172703048H 80080025 4.119.5±0.5173523582H 1250125025 4.131±1174403048H 42042050 4.112±1175453048H 48048045 4.113±1176501723H 100100120 4.1 2.7±0.5177503465H 1000100025 4.126±1.04.50-0.3 *37.5+0.5-0.5 *83.50.5-0.5高倍率电池系列3.10-0.3 *20.0+0.5-0.5 *29.00.5-0.56.30-0.3 *33.5+0.5-0.5 *60.50.5-0.54.10-0.3 *10.5+0.5-0.5 *28.00.5-0.55.90-0.3 *10.5+0.5-0.5 *19.00.5-0.52.40-0.3 *14.0+0.5-0.5 *20.00.5-0.56.50-0.3 *34.0+0.5-0.5 *76+0.5-0.54.20-0.3 *12+0.5-0.5 *15.50.5-0.56.00-0.3 *30.0+0.5-0.5 *48.0+0.5-0.56.00-0.3 *25.0+0.5-0.5 *32+0.5-0.56.00-0.3 *24.0+0.5-0.5 *25.0+0.5-0.5量产规格表厚×宽×高4.50.2-0.3 *30.0+1.0-0.5 *48.0+1.0-0.5尺寸(mm)容量（mAh）8.00.2-0.3 *34.0+1.0-0.5 *50.0+1.0-0.57.00.2-0.3 *14.0+0.5-0.5 *18.0+0.5-0.55.00.2-0.3 *20.0+0.5-0.5 *30.0+0.5-0.56.00.20.3 *30.0+1.0-0.5 *48.0+1.0-0.53.80.20.3 *30.0+1.0-0.5 *40.0+1.0-0.54.00.2-0.3 *12.0+0.5-0.5 *20.0+0.5-0.55.20.2-0.3 *35.0+1.0-0.5 *82.0+1.0-0.54.00.2-0.3 *30.0+1.0-0.5 *48.0+1.0-0.5电压（V）重量（g)7.00.2-0.3 *30.0+1.0-0.5 *48.0+1.0-0.55.00.2-0.3 *17.0+1.0-0.5 *23.5+1.0-0.56.00.2-0.3 *20.0+1.0-0.5 *35.0+1.0-0.5序号型号容量（mAh）内阻（mΩ） 3.50-0.3 *9.5+0.5-0.5 *150.5-0.53.20-0.3 *9.5+0.5-0.5 *29.00.5-0.54.40-0.3 *39.5+0.5-0.5 *83.50.5-0.55.00.2-0.3 *34.0+1.0-0.5 *65+1.0-0.57.00-0.3 *18.0+0.5-0.5 *37.00.5-0.54.80-0.3 *14.0+0.5-0.5 *18.0+0.5-0.55.70.3-0.3 *14.0+0.5-0.5 *18.0+0.5-0.54.50.2-0.3 *12.0+0.5-0.5 *25.0+0.5-0.54.50-0.3 *20.0+0.5-0.5 *30.0+0.5-0.5178502025H 16016090 4.14±0.5版本制定日期页次179601719H 100100120 4.1 2.7±0.5180601717H 9090130 4.1 2.4±0.3181653562H 1100110025 4.127±1.0182701224H 100100140 3.7 2.5±0.3183702535H 45045045 3.712.5±0.5184483462H 85085025 3.722±0.5185553462H 95095025 3.723±0.5186703465H 1300130020 3.731±0.5187852040H 50050045 3.715±0.518875400H 15015090 3.74±0.5189581417H 7070145 3.7 2.06±0.319080600H 28028080 3.7 5.7±0.519180500H 21021080 3.7 4.8±0.519280400H 19019080 3.7 3.8±0.519375500H 17017090 3.74±0.519470350H 100100110 3.7 2.5±0.5195651723H 130±0.5196601723H 13013090 3.7 3.3±0.319775400H 120120110 3.7 3.6±0.3198551723H 120120100 3.7 3.0±0.3199903048H 20011500H 36038075 3.78.0±0.32011850020218650P 20318650204505068A 1550155035 3.729±1205535060A 1550155035 3.729±120550344335 3.70±15.30.2-0.3 *50.0+0.5-0.5 *60.0+0.50-0.5审核制定刘勇备注：规格表中产品内容仅供参考,详细内容以具体的产品规格书为准!※ 聚合物电芯的尺寸和规格可以按客户的要求定做※ 厚度不同（小于6mm）、长宽相同的电芯，不需另外开模※ 客户要求的电池容量若高于上述的标称容量，则要具体讨论，有颜色部分为新增型号，核准 5.00.2-0.3 *50.0+0.5-0.5 *68.0+0.50-0.55.30.2-0.3 *50.0+0.5-0.5 *60.0+0.50-0.57.00.2-0.3 *25.0+1.0-0.5 *35+1.0-0.56.00.2-0.3 *17.0+1.0-0.5 *23.5+1.0-0.57.00.2-0.3 *34.0+1.0-0.5 *65.0+1.0-0.55.50.2-0.3 *34.0+1.0-0.5 *62.0+1.0-0.55.00.2-0.3 *34.0+1.0-0.5 *62.0+1.0-0.5深圳宝嘉能源有限公司SHENZHEN BAOJIA BATTERY TECHNOLOGY CO., LTD.内阻（mΩ） 5.00.2-0.3 *20.0+1.0-0.5 *25.0+1.0-0.56.50.2-0.3 *35.0+1.0-0.5 *62+1.0-0.57.00.2-0.3 *12.0+1.0-0.5 *25+1.0-0.57.80.2-0.3 *50.0+1.0-0.56.00.2-0.3 *17.0+1.0-0.5 *20.0+1.0-0.56.00.2-0.3 *17.0+1.0-0.5 *18+1.0-0.57.80.2-0.3 *60.0+1.0-0.57.30.2-0.3 *40.0+1.0-0.56.80.2-0.3 *35.0+1.0-0.55.50.2-0.3 *17.0+1.0-0.5 *23.0+1.0-0.57.30.2-0.3 *50.0+1.0-0.5其他系列电芯7.80.2-0.3 *40.0+1.0-0.510.30.2-0.3 *50.0+1.0-0.58.30.2-0.3 *20.0+1.0-0.5 *40.0+1.0-0.57.30.2-0.3 *40.0+1.0-0.55.80.2-0.3 *14.0+1.0-0.5 *17.0+1.0-0.5A 2009-12-09PAGE 6 OF 6量产规格表电压（V）重量（g)厚×宽×高序号型号标称容量（mAh）最小容量（mAh）尺寸(mm)。

软包锂离子电池的介绍

软包锂离子电池的介绍
软包锂离子电池是采用聚合物外壳的液态锂离子电池，也被称为聚合物电池。

与传统的锂离子电池相比，软包锂离子电池具有许多优势。

首先，它的安全性较高。

软包锂离子电池在结构上选用铝塑软包装，有别于液态电芯的金属外壳。

一旦发生安全隐患，液态电芯容易爆破，而软包电池最多只会鼓涨。

其次，软包锂离子电池的厚度小，能做得更薄。

普通液态锂电选用先订制外壳，后塞正负极资料的方法，厚度做到以下时存在技术瓶颈，而软包电池则不存在这一问题，厚度可做到以下，符合时下电动自行车的需求方向。

此外，软包锂离子电池的分量轻。

它的重量较平等标准的钢壳磷酸铁锂离子电池轻40%，较塑壳电池轻20%。

再者，软包锂离子电池的容量大。

同等标准的软包锂离子电池较钢壳电池容量高10-15%，较铝壳电池容量高5-10%，成为了电动摩托车及电动汽车
的首选。

另外，软包锂离子电池的内阻小、形状可订制、放电特性佳、维护规划简单等也是其特点。

以上内容仅供参考，如需获取更多信息，建议查阅相关论坛或咨询专业人士。

聚合物锂离子电池 SL400926-T 商品安全说明表说明书

Report No.:PNS2011166711011材料安全数据表Material Safety Data Sheet货物名称:聚合物锂离子电池Name of Goods:Polymer Li-ion Battery委托单位:东莞山锂电池科技有限公司Commissioner:Dongguan Sunly Battery Technology Co.,Ltd广东联鼎检测科技有限公司GUANGDONG UTL CO.,LTD.材料安全数据表Material Safety Data SheetApproved by:Reviewed by：Tested by:批准：审核：主检：眼睛：万一接触，立即用大量的清水冲洗至少15分钟，翻起上下眼睑，直到化学的残留物消失为止，迅速就医. EyeFlush eyes with plenty of water for at least15minutes,occasionally lifting the upper and lower eyelids.Get medical aid.皮肤：万一接触，用大量水冲洗至少15分钟，同时除去污染的衣物和鞋子，迅速就医。

SkinRemove contaminated clothes and rinse skin with plenty of water or shower for15minutes.Get medical aid.吸入：立即从暴露处移至空气清新处，如果呼吸困难给予输氧，立即就医。

InhalationRemove from exposure and move to fresh air e oxygen if available.食入：引用两杯牛奶或水。

如果当事人仍然清晰可以采取催吐的方法，并且立即就医。

IngestionGive at least2glasses of milk or water.Induce vomiting unless patient is unconscious.Call a physician.燃点：不适用Flash Point:N/A.自燃温度：不适用Auto-Ignition Temperature:N/A.灭火介质：大量水(降温)，二氧化碳Extinguishing Media:Water,CO2.特殊灭火程序：自给式呼吸器Special Fire-Fighting Procedures:Self-contained breathing apparatus.异常火灾或爆炸：当电芯暴露于过热的环境中时，安全阀可能会打开。

锂电池(042030)充放电曲线

产品型号：042030 402030
标称容量：200MAH
产品尺寸：厚4MM（±0.2MM）宽20MM（±0.5MM）*长30MM（±0.5MM）
额定电压：3.7V
充电电压：4.2V
充电温度：0°C ~ 45°C
放电温度：-20°C ~ +60°C
存储温度：-20°C ~ +35°C
充电电流：标准充电：0.5C、快速充电：1.0C
标准充电方法：0.5C CC（恒流）充电至4.25V，再CV（恒压4.2V）充电直至充电电流≤0.05C 最大充电电流：1C
最大放电电流：1C
保护IC参数: 过充电保护电压4.20V±0.05V ，过放电保护电压2.7V±0.1V,充许最大电流2A
充电：充电电流为500mA，不带载，当电压充到4.2v时，充电电流逐渐减小，直到降为0，即充满。

放电：
放电电流为50mA，上电时的电压为4.05v左右，当放电到下图标记的点时，电池电压为3.56v 左右。

单片机AD采集经过2.1倍分压之后的电压，采集的频率为1HZ，参考电压为3.6V。

总共用时200分钟左右。

锂电池规格参数表

3 85120 PL1585120M 14500 ≤15 3.7
4 5064 PL155064P 3600 ≤40 3.2
5
PL136067P 3000 ≤40 3.2
6 6067 PL166067P 5000 ≤40 3.2
7 8067 PL158067P 6500 ≤40 3.2
厚度(±0.2) 15 10 15 15 13 16 15
长度(±0.5) 67.5 64.5 67.5 67.5 67.5 67.5 67.5 67.5 70.5 80.5 64.5 67.5 67.5
序
标称容量内阻标称电压
号系列型号
(mAh) (mΩ) (V)
1 77100 PL1577100M 9000 ≤20 3.7
2
PL1085120M 10000 ≤15 3.7
厚度 (±0.2) 3.2 6.5 5 4 5 6 3.8 4 4 5 5 6 3.8 5 8 3.8 3.5 3.8 4 5 5.2 5.8 4 5 6 6.3 5 5 4 5 5.8 5.2 4.2 6 6 5 4 7.2
尺寸(mm) 宽度(±0.5)
10.5 11.5 12.5 12.5 12.5 12.5 14.5 14.5 14.5 14.5 16.5 17.5 17.5 17.5 19.5 20.5 20.5 20.5 20.5 20.5 20.5 20.5 20.5 20.5 20.5 20.5 20.5 20.5 20.5 20.5 21.5 22.5 27.5 30.5 30.5 30.5 30.5 30.5
1
PL363450A 550 ≤55 3.7
3.8
2
PL383450A 600 ≤55 3.7

pmz4020nb材质成分

pmz4020nb材质成分
PMZ4020NB材质成分
PMZ4020NB是一种特殊的材料，它由多种成分组成，包括聚合物、金属、陶瓷等。

它的独特成分使得它在许多领域具有广泛的应用。

聚合物是PMZ4020NB材料的主要成分之一。

这种聚合物具有良好的弹性和柔韧性，使得PMZ4020NB材料能够在不同的环境下保持稳定性。

聚合物的存在还使得材料具有一定的耐磨性和耐腐蚀性，可以在恶劣的环境中使用。

金属是PMZ4020NB材料的另一个重要成分。

金属的加入使得材料具有良好的导电性和导热性，可以在电子器件和热管理领域得到广泛应用。

金属的高强度和耐用性也使得PMZ4020NB材料在结构工程和制造业中得到广泛应用。

陶瓷也是PMZ4020NB材料的重要成分之一。

陶瓷的特殊性质使得PMZ4020NB材料具有良好的绝缘性和耐高温性能，可以在高温工艺和电子器件中承受高温环境。

陶瓷的硬度和抗磨性也使得PMZ4020NB材料具有较高的耐磨性和耐腐蚀性。

PMZ4020NB材料的成分包括聚合物、金属和陶瓷等多种物质。

这些成分的独特性质使得PMZ4020NB材料在许多领域都具有广泛的应用。

无论是在电子器件、热管理领域还是在结构工程和制造业中，PMZ4020NB材料都能够发挥重要的作用。

它的成分组成使得它具
有良好的弹性、导热性、绝缘性和耐高温性能，为各行各业提供了创新的解决方案。

聚合物锂电池电压范围

聚合物锂电池电压范围嘿，大家好，今天咱们来聊聊聚合物锂电池的电压范围。

这话题听起来可能有点技术范儿，但别担心，我会把它说得轻松点儿。

你们知道吗，聚合物锂电池在我们的生活中可是无处不在啊，从手机到电动车，几乎所有的电子设备都有它的身影。

说到电压范围，那可是个非常重要的话题，因为电池的性能和使用寿命都跟它有关。

先来看看，聚合物锂电池的电压范围一般是在3.0伏到4.2伏之间。

说白了，就是电池充满电时能达到4.2伏，放电到3.0伏时就得停下来了。

如果电池电压低于3.0伏，那可就不妙了，电池会受到伤害，使用寿命也会大打折扣。

就像人一样，低于某个水平就会觉得累，没劲儿，再怎么充电也没用。

你说是不是，生活中可不能偷懒，电池也一样。

电池的电压其实也跟它的容量、材料、结构都有关系。

就拿电池的容量来说吧，容量越大的电池，电压也就越稳定，使用时间也更长。

就像咱们吃东西一样，吃得多，能量才充沛，能坚持更久。

不过，电池也不是“吃撑”的，有个上限，超过这个电压，电池就容易发热，甚至出现危险情况。

这时候就真的是“过犹不及”了。

很多人都不知道，电池也是有脾气的，它需要合适的环境来发挥它的作用。

你们可能会问，电压范围对咱们日常生活有啥影响呢？嘿，那可是影响大着呢。

比如说，手机没电了，大家都着急，想着快点充电。

可是，如果电池的电压不对，充电器就不一定能正常工作了。

充电器插上去，灯闪了半天，也不充电。

这时候，就得看看电池电压是否正常。

你说，这不是让人心里着急上火嘛！所以，咱们在使用电子设备的时候，得注意一下电池的电压情况。

电压范围不仅关乎充电，还关乎放电。

电池在使用的时候，电压会逐渐下降，这就像人在运动的时候，慢慢地就会累了。

放电太多，电压就掉得太快，电池寿命自然也就短了。

所以，尽量保持电池的电压在合理的范围内，才能让它陪伴你更久。

你说，买个电池可不容易，谁愿意频繁换呢？在使用聚合物锂电池时，还得小心避免极端的温度。

过热或过冷都会影响电压，真是个麻烦。

聚合物锂电池测试方法和测试标准

项目测试方法达到要求快速充电在环境温度20±5℃的条件下，以200mA恒流充电至4.2V，再以4.2V恒压充电至电流将为4.3mA停止/额定容量在环境温度20±5℃的条件下，电芯在快速充电后1小时内以86mA放电至2.75V所放出的容量≥200mAh开路电压快速充电后24小时内测量≥4.1V 内部阻抗快速充电后用内阻仪测试≤150mΩ循环寿命在环境温度20±5℃的条件下，以200mA进行快速充放电300次的最后一次放电容量≥160mAh低温性能快速充电后在-20±2℃的条件下，以40mA放电的容量≥160mAh 高温性能快速充电后在55±2℃的条件下，以200mA放电的容量≥170mAh 放电平台在环境温度20±5℃的条件下，电芯在快速充电后1小时内以40mA放电至2.75V所放出的容量≥140mAh 荷电保持快速充电后在20±5℃下储存28天，再以40mA放电的容量≥170mAh项目测试方法达到要求恒定湿热性能电芯完全充电后放入温度40±2℃、相对湿度90-95%的恒湿恒热箱中搁置48小时，将电芯取出，在温度为20±5℃的条件下搁置2小时，目测电池外观，以200mAh放电的时间外观无明显鼓胀、锈蚀、冒烟，放电时间≥36min快速充电后，将电芯安装在振动台的台面上，按下面的频率和振幅在X、Y、Z三个方向上从10-55Hz循环扫描振动30min，扫描速率为1oct/min。

振动频率：10～30Hz，单振幅0.38mm；振动频率：30～55Hz，单振幅0.19mm电芯按4.2规定实验结束后，将电芯平均按X、Y、Z三个互相垂直轴向固定在台面上，按下面的要求进行实验：脉冲峰值加速度——100m/s 2；1.2 机械性能聚合物锂离子电池测试方法和测试标准聚合物锂离子电池测试方法和测试标准——402030（200mAh）1.1 电化学性能振动实验外观无明显损伤、开裂、漏液等现象，电芯电压≥3.6V碰撞实验电芯外观无明显损伤、开裂、漏液等现象，电芯电压≥3.6V每分钟碰撞次数——40～80；脉冲持续时间——16ms；总碰撞次数——1000±10自由跌落快速充电后，于1m高处自由跌落到置于水泥地面上的18～20mm厚的硬木板上，从X、Y、Z方向各跌落一次后，进行充放电循环，记录以200mA放电时间外观无明显损伤、开裂、漏液等现象，放电时间≥51min项目测试方法达到要求热冲击电芯快速充电并搁置2h后放置于热箱中，温度以（5±2℃）/min的速率升至130±2℃并保温30min不起火，不爆炸过充电将电芯快速充电并搁置24h后，以600mA恒流充电，直到电芯电压达到5V，电流将到接近零后电芯温度比峰值温度低约10℃不起火，不爆炸钉刺实验电芯快速充电后用一根直径为3～5mm的钢钉从电芯最大的面上穿透电芯不起火，不爆炸重物冲击将电芯快速充电并搁置24h后，用10kg的重锤自1m高度自由落下，冲击固定在夹具中的电芯不起火，不爆炸短路实验将电芯快速充电并搁置24h后，短路其正负极至电芯温度比峰值低约10℃不起火，不爆炸，电芯外表面温度不超过150℃制定：席涛东莞市久森新能源有限公司1.3 安全性能。

聚合物锂电池401520规格书

egrahC dradnatS smetI
电充准标
1 .O N
能性电放充 scitsiretcarahc lacirtcelE 1.4
airetirC ecnamrofreP lleC yrettaB.4
试测及查检能性芯电
41 fo 4 :EGAP A : .VER 810 :.ON COD
司公限有技科子电达立迅海珠
寸尺芯电 noisnemiD lleC 量重芯电 thgieW lleC 度温存储 erutarepmet egarotS 度温作工 erutarepmet gnitarepO 压电止截电放 egatlov ffo-tuc egrahcsiD 流电电放大最 tnerruc egrahcsid.xaM 流电电充大最 tnerruc egrahc.xaM 间时电充 emit gnigrahC 法方电充准标 dohtem gnigrahC dradnatS 流电电充 tnerruc egrahC 量容称标 yticapac lanimoN 压电称标 egatlov lanimoN smetI 压电电充 egatlov egrahC
认确户客
准批
核审
定制
025154 SCI
025154 SCI �号
:ledoM
型
�芯电�书认确格规品产 )lleC(teehS lavorppA noitacificepS
41 fo 1 :EGAP A : .VER :.ON COD 810
司公限有技科子电达立迅海珠
31 21 11 01 01 9 8 7 7 6 5 4 3 3 3
定确商协方双经须�项事的及提未中书明说本何任 .NUJOUHZ dna remotsuc eht neewteb derrefnoc eb dluohs revoc ton seod noitacificeps siht taht srettam ynA 项事它其 srehtO )b

LTC4020EUHF 高压降压升压多化学品电池充电器说明书

1Rev. ADESCRIPTIONLTC4020EUHFHigh Voltage Buck-BoostMulti-Chemistry Battery ChargerDemonstration circuit 2044A is a 55V buck-boost multi-chemistry battery charger featuring the L TC ®4020. The board will accept an input voltage between 15V and 55V. The float voltage of the battery output (BAT) is 25.2V, with 3.3A maximum charge current. The converter out-put (VOUT) has a voltage range of 21V to 28V, with 3A maximum load current. The LTC4020 contains a high efficiency synchronous buck-boost DC/DC controller and uses a proprietary average current mode architecture. The LTC4020 battery charger can provide a constant-current/constant-voltage charge algorithm (CC/CV , with MODE pin grounded), constant-current charging (CC,PERFORMANCE SUMMARYwith MODE pin floated), or charging with an optimized 4-step, 3-stage lead-acid battery charge profile (connect MODE pin to INTV CC , with a 0Ω jumper at the optional R29 position).The LTC4020 data sheet gives a complete description of the IC operation and application information. The data sheet must be read in conjunction with this quick start guide.Design files for this circuit board are available at Design files for this circuit board are available .Specifications are at T A = 25°CSYMBOLCONDITIONS VALUE Input Voltage Range15V to 55V Battery Float Voltage (BAT) (Nominal)I BAT = 0A to 3.3A 25.2V Converter Output Voltage (VOUT)I OUT = 0A to 3A 21V to 28V Maximum Battery Charge Current, I BAT I OUT = 0A 3.3A Maximum Converter Output Current, I OUT I BAT = 0A3A Typical EfficiencyV IN = 24V, V OUT = 25.2V, I OUT = 3A97%Typical Converter Output RippleV IN = 55V, V OUT = 25.2V, I OUT = 3A (20MHz BW)56mV P-PAll registered trademarks and trademarks are the property of their respective owners.QUICK START PROCEDUREDemonstration circuit 2044A is easy to set up to evaluate the performance of the LTC4020. Refer to Figure 1 for the proper measurement equipment setup and follow the procedure below:1. With power off, connect the input power supply (set for 0V) to V IN and GND (input return).2. Connect the converter output load between V OUT and GND (Initial load: no load).3. Connect the DVMs to the input and outputs.4. Turn on the input power supply and slowly increase to 24V. Check for the proper output voltages, V OUT of 25.2V and BAT of 25.2V.5. Once the proper output voltages are established, adjust the converter output load within the operating range (3A maximum) and/or adjust input voltage (15V to 55V) and observe the output voltage regulation, ripple volt-age, efficiency and other parameters.NOTE: When measuring the output or input voltage rip-ple, do not use the long ground lead on the oscilloscope probe. See Figure 2 for the proper scope probe technique. Short, stiff leads need to be soldered to the (+) and (–) terminals of an output capacitor. The probe’s ground ring needs to touch the (–) lead and the probe tip needs to touch the (+) lead.Additional Notes:1. CAUTION: Be careful when testing with high voltage. High voltage can result in an electric shock if care is not taken.2. CAUTION: Batteries are potentially dangerous high energy sources. Improper connection, overcharge, or rapid discharge could result in explosion and/or file. Please read the specification/manual of the battery before test.3. The combined converter output load current and bat-tery charging current should not exceed 3.3A.4. Without a proper battery, BAT output can be open or connected with other suitable loads for test purposes. It may be a good practice to add low ESR electrolytic capacitors to the BAT output (≥1000µF at ≥35V, for 25.2V float voltage).NOTE: These capacitors help simulate the low imped-ance of a battery and maintain stability of the charge current loop. It’s only needed for test purposes with electronic or resistive loads, and not needed in the actual battery application/test (where the BAT load is a battery).5. BAT float voltage can be easily adjusted with the resis-tor divider R8/R10. Converter output voltage V OUT can be adjusted with the resistor divider R9/R11. Adjust/ optimize the loop compensations if necessary.2Rev. AQUICK START PROCEDUREdc2044a F01Figure 1. Proper Measurement Equipment SetupFigure 2. Measuring Output Voltage Ripple3Rev. A4Rev. AFigure 3. Efficiency vs Load Current (V OUT = 25.2V)Figure 4. Efficiency vs Input Voltage (V OUT = 25.2V, I OUT = 3A)QUICK START PROCEDURELOAD CURRENT (A)E F F I C I E N C Y (%)dc2044a F0310070908040302010060500.011100.1V IN (V)E F F I C I E N C Y (%)dc2044a F049698979392919095941434384246505622263018PARTS LISTITEM QTY REFERENCE PART DESCRIPTION MANUFACTURER/PART NUMBER Required Circuit Components11C1CAP, CHIP, X7S, 0.1µF, 10%, 100V, 0603TDK, C1608X7S2A104K24C2, C3, C15, C17CAP, ELEC., 56µF, 20%, 63V, 10.3mm × 10.3mm SUNCON, 63HVH56M31C4CAP, CHIP, C0G, 100pF, 10%, 16V, 0402AVX, 0402YA101KAT9A41C5CAP, CHIP, C0G, 0.1µF, 10%, 16V, 1206KEMET, C1206H104J3GACTU51C6CAP, CHIP, X7R 10nF, 10%, 50V, 0603AVX., 06035C103KAT61C8CAP, CHIP, C0G, 680pF, 10%, 50V, 0603AVX., 06035A681KAT2A71C9CAP, CHIP, C0G, 68pF, 5%, 16V, 0402AVX., 0402YA680JAT4A82C19, C20CAP, CHIP, X5R, 0.22µF, 10%, 25V, 0603AVX., 06033D224KAT2A91C10CAP, CHIP, X7R, 0.001µF, 10%, 25V, 0603AVX., 06033C102KAT2A101C11CAP, CHIP, X5R, 2.2µF, 10%, 16V, 0603TDK, C1608X5R1C225K111C12CAP, CHIP, X7R, 0.033µF, 10%, 25V, 0402TDK, C1005X7R1E333K126C14, C16, C18, C23, C27, C28CAP, CHIP, X7S, 4.7µF,20%, 100V, 1210TDK, C3225X7S2A475M131C21CAP, CHIP, X5R, 10µF, 20%, 6.3V, 0805AVX., 08056D106KAT2A142D1, D2DIODE, SMT, SUPERBARRIER, 60V, 0.5A, SOD123DIODES INC., SBR0560S1151D3DIODE, LED, RED, SMT, 0603PANASONIC, LNJ208R8ARA161D4DIODE, LED, GREEN, 0603LITE-ON, L TST-C190KGKT171D6 DIODE., SMT SCHOTTKY BARRIER RECTIFIER, SMA VISHAY., B360A-E3181L1IND, SMT, 15µH, 10A, 20%, 10mm × 11.3mm COILCRAFT, XAL1010-153MEB 191M1P-CHANNEL MOSFET, –60V, –14.4A, PowerPAKSO8VISHAY, Si7461DP-T1-E3202M2, M3DUAL N-CHANNEL MOSFET, 60V, 20.4mΩ, SO8FL ON SEMI NTMFD5C674NL211R2RES, CHIP, 510k, 5%, 0402VISHAY, CRCW0402510KFKED 225R1, R4, R5, R12, R13RES, CHIP, 100k, 5%, 0402VISHAY, CRCW0402100KJNED 232R6, R7RES, CHIP, 20Ω, 5%, 0402VISHAY, CRCW040220R0JNED 241R8RES, CHIP, 226k, 0.1%, 0603VISHAY, TNPW06030F226BEEA 251R9RES, CHIP, 226k, 1%, 0402VISHAY, CRCW0402226KFKED 261R10RES, CHIP, 24.9k, 0.1%, 0402VISHAY, TNPW04020F24K9BEED 271R11RES, CHIP, 24.9k, 1%, 0402VISHAY, CRCW040224K9FKED 281R14RES, CHIP, 10k, 1%, 0402VISHAY, CRCW040210K0FKED 291R15RES, CHIP, 56k, 1%, 0402VISHAY, CRCW040256K0FKED 301R16RES, CHIP, 47k, 1%, 0402VISHAY, CRCW040247K0FKED 318R21–25, R34, R35, R37RES, CHIP, 0Ω JUMPER, 0402VISHAY, CRCW04020000Z0ED 321R36RES, CHIP, 0Ω JUMPER, 0603VISHAY, CRCW06030000Z0EA 332R18, R20RES, CHIP, 100Ω, 5%, 0402VISHAY, CRCW0402100RJNED 341R19RES, CHIP, 4.7Ω, 5%, 0402VISHAY, CRCW04024R70JNED 352R26, R27RES, CHIP, 3k, 5%, 0402VISHAY, CRCW04023K00JNED 371R28RES, CHIP, 51k, 5%, 0402VISHAY, CRCW040251K00JNED 381R38RES, CHIP, 5.1Ω, 5%, 0805VISHAY,CRCW08055R10JNEA 392RCBRB1, RCBRT1RES, CHIP, 0.008Ω, 1%, 0.5W, 1206VISHAY, WSL12068L000FEA18 401RCBAT1RES, CHIP, 0.015Ω, 1%, 0.5W, 1206TT ELEC LRC-LRF1206F-01-F 411U1IC, LTC4020EUHF, 5mm × 7mm QFN38ANALOG DEVICES, LTC4020EUHF5Rev. APARTS LISTITEM QTY REFERENCE PART DESCRIPTION MANUFACTURER/PART NUMBER Additional Demo Board Circuit ComponentsCAP, CHIP, OPTIONAL10C7,C13,C22 , C24,C25,C26,C30,C31 (OPT)20D7 (OPT)DIODE, SMT SOD12330D5(OPT)DIODE., SMT SCHOTTKY BARRIER RECTIFIER, SMA40R3, R17, R29, R31, R32 OPT RES, OPTIONALHardware for Demo Board Only111E1, E2, E5–E10,E13, E14, E17TURRET, 0.09-INCH DIA MILL-MAX, 2501-2-00-80-00-00-07-0 26E3, E4, E11, E12, E15, E16VERTICAL BANANA JACK, 575-4KEYSTONE, 575-434STAND-OFF, NYLON (SNAP ON), 0.375-INCH TALL KEYSTONE, 8832 (SNAP ON)41FAB, PRINTED CIRCUIT BOARD ANALOG DEVICES, DC2044A6Rev. A7Rev. AInformation furnished by Analog Devices is believed to be accurate and reliable. However , no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices.SCHEMATIC DIAGRAM8Rev. A02/21ANALOG DEVICES, INC. 2013-2021ESD CautionESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.Legal Terms and ConditionsBy using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc. (“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal, temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONL Y. Customer understands and agrees that the Evaluation Board is provided for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional limitations: Customer shall not (i) rent, lease, display, sell, transfer , assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term “Third Party” includes any entity other than ADI, Customer , their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board. Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice to Customer . Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT . ADI SPECIFICALL Y DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT , OR CONSEQUENTIAL DAMAGES RESUL TING FROM CUSTOMER’S POSSESSION OR USE OF THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT . Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable United States federal laws and regulations relating to exports. GOVERNING LAW . This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed.。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

60±25%R.H. Bare Cell （单体电池储存湿度范围）
Less than 1 year: -20~25℃ （小于一年：-20~25℃） 13 Storage Temperature Range （储存温度范围） less than 3 months: -20~40℃ （小于 3 个月：-20~40℃ ） Height: Max 31.5 mm (高度：最大 31.5mm) Pack Dimension （包装后尺寸） Width: Max20.5mm (宽度：最大 20.5mm) Thickness: Max4.2mm (厚度：最大 4.2mm)
60±25%R.H. at the shipment state （出货状态时的湿度范围）
14
Initial Dimension （初始尺寸）
Page 4 o f 1 7
深圳市言九电子科技有限公司 YJ POWER GROUP LIMITED
3 Performance And Test Conditions (电池性能及测试条件)
YJ POWER GROUP LIMITED
本说明书适用于本书中所提及的、言九电子科技有限公司制造的钴酸锂电池。
2
Product Specification（产品技术规格）
Table 1 (表 1) No. (序号) 1 Item （项目） Rated Capacity （额定容量） Nominal Voltage （正常电压） Voltage at end of Discharge （放电终止电压） Charging Voltage (充电电压) General Parameter (常规参数) Typical （标称容量） Minimum （最小容量） 3.7V 190mAh 180mAh Remark （备注） Standard discharge（0.2C C5A) after Standard charge （标准充电后 0.2C5A 标准放电） Mean Operation Voltage （即工作电压） Discharge Cut-off Voltage （放电截止电压）
深圳市言九电子科技有限公司 YJ POWER GROUP LIMITED
Customer/客户:
VER: A DATE:14.01.06
Li-ion Polymer Battery Specification
锂离子聚合物电池规格书
MODEL/型号: YJ-PL402030（190mAh）
A
First Edition
Page 2 o f 1 7
深圳市言九电子科技有限公司 YJ POWER GROUP LIMITED
1
VER: A DATE:14.01.06
Scope（适用范围） This specification is applied to the reference battery in this Specification and manufactured by
5
Internal Impedance (内阻)
≤300mΩ
6
Standard charge （标准充电）
Constant Current 0.5C5A Constant Voltage 4.2V 0.01 C5A cut-off （持续电流：0.5C5A 持续电压：4.2V 截止电流：0.01 C5A） Constant current 0.2 C5A end voltage2.75V （持续电流：0.2C5A 截止电压：2.75V） Constant Current 1C5A Constant Voltage 4.2V 0.01 C5A cut-off （持续电流：1C5A 持续电压：4.2V 截止电流：0.01 C5A）
Continuous the table 1 (续表 1) No. (序号) Item （项目） General Parameter (常规参数) Constant current 1 C5A end voltage 2.75V （持续电流：1 C5A 截止电压：2.75V）
VER: A DATE:14.01.06
Prepared By/Date 编制/日期 Checked By/Date 审核/日期 Approved By/Date 批准/日期
马南喜/2014.01.06
付春阳/2014.01.06
李鹏/2014.01.06
ture/Date(签名/日期)
Company Name(公司名称)
3.1 Standard Test Conditions（标准测试条件）
VER: A DATE:14.01.06
Test should be conducted with new batteries within one week after shipment from our factory and the cells shall not be cycled more than five times before the test. Unless otherwise specified, test and measurement shall be done under temperature of 20±5℃ and relative humidity of 45~85%. If it is judged that the test results are not affected by such conditions, the tests may be conducted at temperature 15~30℃ and humidity 25~85%RH. 测试必须使用出厂时间不超过一个星期的新电池，且未进行过五次以上的充放电循环。除非特别说明，否则测试会在温度 20±5℃，相对湿度 45~85%的条件下进行。如果经鉴定测试结果不受上述条件影响，测试也可以在温度 15~30℃，相对湿度 25~85%RH 的条件下进行。 3.2 Measuring Instrument or Apparatus（测量器具及设备） 3.2.1 Dimension Measuring Instrument（尺寸测量器具） The dimension measurement shall be implemented by instruments with equal or more precision scale of 0.01mm. 尺寸测量器具的精度等级应不小于 0.01 mm 。 3.2.2 Voltmeter（伏特计） Standard class specified in the national standard or more sensitive class having inner impedance more than 10kΩ /V 按照国家标准指定规格等级或采用灵敏度更高的，测量电压时内阻不应小于 10kΩ /V。 3.2.3 Ammeter（安培计） Standard class specified in the national standard or more sensitive class. Total external resistance including ammeter and wire is less than 0.01Ω . 按照国家标准指定规格等级或采用灵敏度更高的，包括电流表及电线在内的总外阻应小于 0.01Ω 。 3.2.4 Impedance Meter（电阻计） Impedance shall be measured by a sinusoidal alternating current method(1kHz LCR meter). 内阻测试仪测量原理应为交流阻抗法（1kHz LCR）。 3.3 Standard Charge\Discharge（标准充放电） 3.3.1 Standard Charge ：Test procedure and its criteria are referred as follows: 标准充电：测试过程及标准如下： 0.5C5A =95mA Charging shall consist of charging at a 0.5C5A constant current rate until the cell reaches 4.2V. The cell shall then be charged at constant voltage of 4.2 volts while tapering the charge current. Charging shall be terminated when the charging current has tapered to 0.01 C5A . Charge time : Approx 4.0h, The cell shall demonstrate no permanent degradation when charged between 0 º C and 45 º C. 电池先 0.5C5A 恒流充至 4.2V，当充电电流逐渐减小时再以 4.2V 恒压充至电流减小到 0.01 C5A，充电时间大约为 4 个小时。在 0℃-45℃内充电电池应没有永久损害。 3.3.2 Standard Discharge（标准放电） 0.2C5A =38mA Cells shall be discharged at a constant current of 0.2 C5A to 2.75 volts @ 20º 5C 电池以 0.2 C5A 恒流放电至 2.75V @ 20º 5C 3.3.3 If no otherwise specified, the rest time between Chare and Discharge amount to 30min. 如果没有特别说明，电池充放电间隔时间为 30 分。