紧固件专用词中英文对照
紧固件中英文对照
最全紧固件中英文对照，外贸必备词典！一、紧固件 Fasteners标准紧固件 Standard Fasteners非标准紧固件 Nonstandard Fasteners特殊紧固件 Special Fasteners汽车紧固件 Automotive Fasteners铜制紧固件 Brass Fasteners航天用紧固件 Aerospace Fasteners精密紧固件 Precision Fasteners化学紧固件 Chemical Fasteners摩托车紧固件 Motorcycle Fasteners不锈钢紧固件 Stainless Steel Fasteners铁道紧固件 Railway Fasteners防松紧固件 Self-locking Fasteners高强度紧固件 High strength FastenersPEM紧固件 PEM Fasteners钢结构紧固件 Steel Structural Fasteners压铆紧固件 Self-Clinching Fasteners铝制紧固件 Aluminum Fasteners钛合金紧固件 Titanium Alloy Fasteners尼龙紧固件 Nylon Fasteners精制紧固件 Finished Fastener粗制紧固件 Unfinished Fastener螺纹紧固件 Threaded Fastener半精制紧固件 Semi-Finished Fastener抗剪紧固件 Shear Fastener抗拉紧固件 Tension Fastener面板紧固件 Panel Fasteners二、螺栓 Bolts六角头螺栓Hexagon Head Bolts六角法兰面螺栓Hexagon Flange Bolts轨道螺栓（鱼尾螺丝）Track Bolts高强度螺栓 High Strength Bolts地脚螺栓Eyelet Bolts马车螺栓 Carriage Bolts护拦螺栓 Guardrail Bots焊接螺栓 Weld Bolts双头螺栓 Double End Bolts钢结构连接副 Structural Bolting内六角螺栓 Hex Socket Bolts合金钢螺栓 Alloy Steel Bolts方头螺栓 Square Head Bolts/Square Bolts钩头螺栓 Hook Bolts不锈钢螺栓 Stainless steel Bolts异型螺栓 Special Bolts吊环螺栓 Lifting Eye Bolts汽车螺栓 Automotive Bolts法兰螺栓 Flange Bolts轮胎螺栓 Wheel BoltsT型螺栓 T Bolts扁头螺栓 Pan Head Bolts蝶形螺栓 Wing Bolts沉头螺栓 Countersunk Bolts沉头方颈螺栓 Countersunk Square Neck Bolts带榫螺栓 Cup head Nib Bolts沉头双榫螺栓 Flat Countersunk Double Nib Bolts 活节螺栓 Eye Bolts压铆螺栓 Clinching Bolts红打螺栓 Hot Forging Bolts圆头螺栓 Round Head Bolts圆头方颈螺栓 Round Head Square Neck Bolts圆头双榫螺栓 Round Head Fin Neck Bolts米制圆头方颈螺栓 Metric Round Head Square Neck BoltsT型带孔螺栓 T bolts withHole六角头铰制孔用螺栓 Hexagon Fit Bolts六角头螺杆带孔螺栓 Hexagon Bolts with split pin hole on shank钢网架螺栓球节点用高强度螺栓 High Strength Bolts for joints ofspace grid structures基础螺栓 Foundation BoltsU型螺栓 U Bolts高张力螺栓 High Strength Bolts大尺寸螺栓 Big Size Bolts螺椿栓 Stud Bolts拉栓 Blind Bolts重型六角头螺栓 Heavy Hex Bolts大头马车螺栓 Step Bolts扭矩控制螺栓 T.C. Bolts蛋形颈轨道用螺栓 Elliptic Neck Track Bolts调节螺栓，调节螺钉 Pitch-Adjustable Bolts and Screws加长非标双头螺栓 Lengthen Non-Standard Stud Bolts电梯膨胀螺栓 Elevator Expansion Bolts三、螺钉 Screws?六角螺钉Hex Head Cap Screws/Hex Screws六角机械螺钉 Hex Head Machine Bolts六角法兰螺钉 Hex Flange Screws内六角孔螺丝 Hex Socket Cap Screws内六角沉头螺钉 Hex Socket Flat Countersunk Head Cap Screws 紧定螺钉/固定螺钉 Set Screws止付螺钉Socket Set Screws方头紧定螺钉 Square Head Slotted Head Set Screws翼形螺钉/蝶形螺钉 Wing Screws精密螺钉 Precision Screws自攻螺钉 Self-Tapping Screws自削螺钉 Thread Cutting Screws钻尾螺钉 Self-Drilling Screws旋入螺钉 Drive Screws机械螺钉 Machine Screws木螺钉 Wood Screws家具螺钉 Furniture Screws纤维板钉/塑板螺钉 Chipboard Screws墙用螺钉 Drywall Screws剪力钉(焊接螺钉) Welding Studs螺丝附华司组合 Screws And Washers Assembled (Sems)铜螺钉 Brass Screws铝螺钉 Aluminum Screws合金钢螺钉 Alloy Steel Screws组合螺钉 SEM screws电子螺钉 Electronic Screws微小精密螺钉 Micro Screws塑料螺钉 Plastic Screws复合材料用螺钉 Particle Board Screws钛合金螺钉 Titanium Alloy Bolts钛、锆、钼、铌等螺丝、零件、材料 Ti ,Zr ,Mo, Nb Pare Metal Bolts Parts 拇指螺丝 Thumb Screws飞机特殊扣件 Source Control Bolts电梯螺钉 Elevator Screws四角头固定螺钉 Square Set Screws单向螺钉 One Way Lag Screws管夹螺钉 Hose Clamp Screws不锈钢固定螺钉 Stainless Steel Hex Socket Cap Screws不锈钢内六角螺钉 Stainless Steel Hex Socket Cap Screws铰链螺钉 Hinge Screws货柜螺钉 Container Screws复合材料钻尾螺钉 Bi-Metal Self Drilling Screws三角牙螺钉 Tri-lobular Thread Screws高低牙螺钉 High Low Screws夹板用螺钉 Particle Board Screws马桶螺钉 Toilet Closet Bolts特长螺钉 Special Longer Screws建业螺钉 Building Fasteners不锈钢六角螺丝 Stainless Steel Hex Socket Cap Screws不锈钢特殊螺钉 Special Stainless Steel Screws宽牙螺钉（粗牙螺钉） Coarse Thread Screws链带螺钉 Collated Screws水泥螺钉 Concrete Screws板模螺钉 Construction Bolts锌蝶螺钉 Die Cast Wing Screws; Zinc Alloy重型车钉 Heavy Duty Wheel Hub Bolts内六角固定螺钉 Hex Socket Set Screws复合材料用螺钉（夹板用） Particle Board Screws犁壁螺钉 Plow Bolts不锈钢木螺丝 Stainless Steel Wood Screws套挂螺栓及螺钉 Toggle Bolts钛合金膨胀螺钉 Titanium Alloy Expansion Bolts不锈钢高低牙螺钉 Stainless Steel High-Low Thread Screws不锈钢机械螺钉 Stainless Steel Machine Screws不锈钢钻尾螺钉 Stainless Steel Self Drilling Screws不锈钢自攻螺钉 Stainless Steel Self Tapping Screws不锈钢自削螺钉 Stainless Steel Thread Cutting Screws不锈钢三角牙螺钉 Stainless Steel Tri-Lobular Thread Screws 不锈钢宽牙螺钉 Stainless Steel Coarse Thread Screws开槽沉头螺钉 Slotted Flat Countersunk Head Machine Screws 开槽盘头螺钉 Slotted Pan Head Machine Screws十字槽盘头螺钉 Cross Recessed Pan Head Machine Screws滚花头台阶螺钉 Knurled Thurmb Screws六角头木螺钉 Hexagon Head Wood Screws平头滚花螺钉 Knurled Thin Thumb Screws?四、螺母/螺帽 Nuts六角螺母 Hexagon Nuts六角盖形螺母 Hex Cap Nuts六角锯齿螺母 Hex Serrated Nuts六角法兰螺母 Hex Flange Nuts六角平面螺母 Hex Flat Nuts六角厚螺母Hex Thick Nuts重型六角开槽螺母 Heavy Hexagon Slotted Nuts高脚螺母 Hex Coupling Nuts (High Nuts)圆螺母 Round Nuts四角螺母/四方螺母 Square Nuts四方焊接螺母 Square Weld Nuts四爪螺母Four-Claw Nuts管用螺母 Pipe Nuts轮壳螺母 Wheel Nuts蝶型螺母 Wing NutsU形螺母 U NutsT形螺母 T Nuts环首螺母 Eye Nuts齿形螺母 Kep Nuts齿花螺母 Clinch Nuts焊接螺帽 Weld Nuts压铆螺母 Self-clinching Nuts高张力螺母 High Strength Nuts建业用螺母 Structural Nuts不锈钢螺母 Stainless Steel Nuts铜螺母 Brass Nuts铝螺母 Aluminum Nuts合金钢螺母 Alloy Steel Nuts重型车螺母 Heavy Duty Wheel Hub Nuts铁器焊接袋帽 Acorn Cap Nuts金属预置扭矩式螺母 All-Metal Prevailing Torque Type Nuts壁虎螺母 Anchor Nuts大尺寸螺母 Big Size Nuts铁盖袋帽 Closed End Acorn Nuts盘形华司螺母 Conical Washer Nuts铁盖+尼龙圈组合盖帽 Din 986 Domed Cap Nuts法兰尼龙盖帽 Flange Nylon Insert Lock Nuts平面华司螺母 Flat Washer Nuts六角割沟螺母 Hex Slotted Nuts自锁螺母 Self-Locking Nuts制止螺母 Sliding NutsSLN-自动防松螺母 SLN Self-Locking Nuts特殊螺母 Special Nuts弹簧螺母 Spring Nuts不锈钢法兰螺母 Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺母 Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺母 Stainless Steel Heavy Hex Nuts不锈钢六角螺母 Stainless Steel Hex Nuts不锈钢尼龙嵌入螺母 Stainless Steel Nylon Insert Lock Nuts普通六角螺母 Hex Nuts六角重型螺母 Heavy Hex Nuts薄型螺母 Hex Jam Nuts尼龙嵌入防松螺母 Nylon Insert Lock Nuts尼龙锁紧螺母Nylon Cage Nuts机械螺丝用六角螺母 Hex Machine Screw Nuts米制六角开槽螺母 Metric Slotted Hex Nuts轨道螺栓用方螺母 Track Bolt Nuts米制六角金属锁紧螺母 Prevalling Torque Hexagon Nuts 开槽螺母Slotted Round Nuts六角开槽薄螺母Hexagon Slotted Thin Nuts?五、螺柱 Studs?压铆螺柱 Self-Clinching Studs铜螺柱 Brass Studs焊接螺柱 Weld Studs双头螺柱 Double End Studs六角螺柱 Hex Studs支撑卡柱 Self-Clinching Standoffs?六、垫圈 Washers弹簧垫圈 Spring Washers/Spring Lock Washers宽型弹簧垫圈 Extra-duty Helical Spring Lock Washers 杯型垫圈 Cup washers波形垫圈 Wave Washers内齿垫圈 Internal Tooth Washers外齿垫圈 External Tooth Washers铜垫圈 Copper Washers方垫圈 Square Washers密封垫圈 Sealing Washers碟形弹簧垫圈 Disc Spring Washers外舌止动垫圈External Tab Washers高强度垫圈 High strengthen washers橡胶垫圈 Rubber Washers锁紧垫圈 Lock Washers平垫圈 Plain Washers鞍型弹性垫圈 Curved Spring Washers锯齿锁紧弹性垫圈 Toothed lock washers外锯齿锁紧垫圈 Serrated Lock Washers锥形垫圈 Taper Washers重型弹簧垫圈 Heavy Spring Lock Washers尼龙垫圈 Nylon Washers淬硬钢垫圈 Hardened Steel Washers?七、铆钉 Rivets?平头铆钉 Flat Head Rivets击芯铆钉 Drive Rivets彩色铆钉 Colored Rivets沉头铆钉 Countersunk Head Rivets半沉头铆钉 Oval Countersunk Head Rivets平锥头铆钉 Cone Head Rivets抽芯铆钉 Blind Rivets开口铆钉 Split Rivets开口型抽芯铆钉 Open End Blind Rivets拉铆钉 Pop Rivets封闭铆钉Closed End Rivets封闭性抽芯铆钉 Sealed Type Blind Rivets塑料铆钉 Plastic Rivets空心铆钉 Tubular Rivets环槽铆钉 Ring Groove Rivets单鼓型铆钉 Single-Grip Rivets圆头铆钉 Round Head Rivets高沉头铆钉 Countersunk Head Rivets铝铆钉 Aluminum Rivets实心铆钉 Solid Rivets沉头实心铆钉 Countersunk Head Solid Rivets 灯笼铆钉 Lantern Blind Rivets半空心铆钉 Semi-Tubular Rivets圆头半空心铆钉 Semi-tubular Pan Head Rivets 异型铆钉 Special Rivets不锈钢铆钉 Stainless Steel Rivets双鼓型铆钉 Multi-grip Rivets高强度铆钉 High Strength Rivets台阶铆钉 Step Rivets面板铆钉 Tablet Rivets开花型抽芯铆钉 Flowering Blind Rivets拉花型抽芯铆钉 Peel Type Blind Rivets沟槽型抽芯铆钉 Grooved Type Blind Rivet铆接工具 Riveting Tool?八、壁虎（膨胀螺栓）Anchors/Expansion Bolts化学锚栓 Chemical Anchors打入式壁虎 Hammer Drive Anchors内迫壁虎 Drop in Anchors重型壁虎 Heavy Duty Anchors锤钉壁虎 Hit Anchors中空壁虎 Hollow Wall Anchors套管壁虎 Sleeve Anchors插片壁虎 Ceiling Anchors门窗、地板专用壁虎 Nylon Frame Anchors or Metal frame Anchors 电梯壁虎 Bolt Anchors车修壁虎 Wedge Anchors鱼眼壁虎 Tie Wire Anchors外迫壁虎 Cut Anchors塑料膨胀 Plastic Anchors不锈钢重载胀栓 Heavy Duty Expansion Anchors象脚壁虎 Elephant Foot Anchors长型兰花夹 Short Strap Anchors?九、销 Pins?开口销 Split Pins圆锥销 Taper Pins锁销 Lock Pins销轴 Clevis Pins with head槽销 Grooved Pins弹性销 Spring Pins圆柱销 Parallel Pins弹性圆柱销 Slotted Spring Pins带孔销 Pins with split pin hole?十、挡圈 Circlips/Rings?开口挡圈 E rings孔用挡圈 Circlips for holes轴用钢丝挡圈 Roundwire Snap Rings for shaft轴肩挡圈Rings for shoulder夹紧挡圈 Grip Rings轴用卡簧 Circlips for shafts带齿轴用挡圈 Retaining Rings with Lugs for shafts 钢丝锁圈 Round wire Circlips锥形锁紧挡圈 Lock Rings with cone pins?十一、其他 Others?牙条 Threaded Rod冲压件 Stampings平键 Parallel Keys半圆键 Woodruff Keys扳手 Spanners钢丝螺套 Wire Thread Insert自动车床车削件 CNC Turning Parts齿轮 Gears模具 Molds线材盘元 Iron or steel wire rod铰链 Hinge表面处理 Surface Treatment。
紧固件-中英文对照
紧固件-中英文对照No. 英文单词简写中文1 screw scr 螺丝2 nut nut 螺母3 washer wash 垫圈4 head hd 头5 thread thre 螺纹6 coating coat 镀层7 rivet riv 铆钉8 standoff stdoff 内外六角钉9 driver driv 穴10 hexagon hexa 六角11 tooth tooth 齿12 lock lck 锁13 spring spr 弹簧14 wave wave 波浪型15 pitch pitch 牙距16 partial thread PT 半螺纹17 PT PT 一种螺纹形式18 Full Thread FT 全螺纹19 silver silv 银20 cone cone 锥形21 Eco-syn Eco 30度牙的一种螺纹22 Thread Forming TF 自攻螺纹23 Self Tapping self tapp 自切屑螺纹24 pin pin 销25 shaft Shaf 轴26 steel St 铁27 stainless steel SS 不锈钢28 Brass(Cu) Bras(Cu) 铜29 Aluminum AL 铝30 Rubber Rub 橡胶31 machine screw mech scr 机制螺丝32 SEM screw SEM Scr 组合螺丝33 Material material 材料34 Grade GD 等级35 Finish Finish 表面处理36 Point Point 点37 Clamp Clam 夹子38 internal Int 内39 external ext 外40 thickness / 厚度41 length / 长度42 hole / 孔43 Metric Metcric 公制44 DIN / 德标45 ANSI / 美标46 JIS / 日标螺丝相关参数英语对照A: Machine Screw: 机械螺丝B: Tapping Screw: 自攻螺丝(分使用于金属与使用于塑料二种)B-1: Sheet Metal Tapping Screw. (铁板牙自攻螺丝)B-2: Plastic Tapping Screw. ( 塑料用, 自攻螺丝)C: Wooden Screw : 木工螺丝D: Drywall Screw : 水泥墙螺丝常见螺丝材质:a.Low Carbon Steel :低碳钢b. SS-304 : Stainless Steel 304c. SS-302: Stainless Steel 302 :结构韧性较好d. Aluminum 5052 :铝合金5052d. Brass: 黄铜e. Bronze: 青铜f. UNS C11000 Copper: 锑铜Finish Code: 外观处理规格Head Code: 头部外型螺丝型号Drive Code: 头部剖沟,特征型号Length Code: 螺丝长度(mm)A-1: Thread Code: 螺丝型号A-2: Length Code: 螺丝长度:A-3: Drive Code/ 头部剖沟,特征.a. Slotted: 一字( Minus )b. Phillips: 十字( Plus )c. Phil-Slot: 一字/十字d. Hex Scoket: 内六角e. One Way: 单向(只可锁入,不可退出) A-4: Head Code/ 头部外型.a. Flat: 平头(锁入后,顶部与工作件齐平)b. Oval: 色拉头c. Round: 圆头d. Pan: 圆扁头e. Truss: 大圆扁头f. Hex : 六角头A-5: Finish Code/ 外观处理.a. Z: Zine-Plated: 镀锌b. Ni: Ni-Plated: 镀镍c. Tin-Plated: 镀锡d. Zine Plated / Green Iridite: 镀锌绿膜处理.e. Radiant Plated: 镀五彩f. Passivate: 抗氧化处理.g. Alodial Finish: 无外观处理螺纹大径：Major Diam螺纹中径：Pitch diam螺纹底径：Minor diam通止规：Go/No go gage机械性能：mechanical and physical propertiesunified thread 统一英制螺纹Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement 镀后去氢，防止氢脆Case carburization 表面渗碳With across flats 对边With across corners 对角Radius of fillet:头下圆角Transition thread length 过度螺纹Wrenching height 扳拧高度Rockwell 铬氏硬度Vickers 维氏硬度Brinell 布氏硬度Metallography microscope 金相显微镜Salt spray device 盐雾试验箱Tensile testing machine 拉力试验机Cold forming 冷打Hot forging 红镦P C 8 = property class 8 机械性能8级原材料：Raw material球化退火：Annealing冷拔：Drawing冷镦：Forming机加工：Machining螺纹成型：Roll Threading热处理：heat-treatment表面处理：finish去氢：Lustrating hydrogen检验：Inspection包装：Packing入库：Stocking车床：lathe磨制：grinding红打：hot forging冲压：punchingDiameter 直径Length 长度各类紧固件标准件产品英语翻译对照插片壁虎Steel Ceiling Anchors内迫壁虎Drop in Anchors碳钢锤钉壁虎Steel Hit Anchors碳钢六角螺帽Steel Hex Coupling Nuts强力车修壁虎Wedge Anchors外迫壁虎Cut Anchors化学壁虎Chemical Anchors不锈钢重载胀栓Heavy Duty Expansion Anchors鱼眼壁虎企眼长螺帽Tie Wire Anchors锌合金打入式壁虎Hammer Drive Anchors弹簧螺帽Strut Nuts兰花夹系列Toggle Bolts (Spring Toggle & Gravity Toggle)门窗、地板专用壁虎Nylon Frame Anchors or Metalframe Anchors石膏板中空壁虎Hollow Wall Anchors套管式壁虎Sleeve Anchors打入式壁虎鱼形尼龙壁虎Nylon Frame Harmmer Fixing (Nylon Hammer Drive Anchors)强力式锤钉壁虎Hit Anchors电梯壁虎Bolt Anchors重载壁虎Heavy duty anchors两片夹Loxin Masonry Anchors定位螺栓Set Bolts长型兰花夹Short Strap Anchors工具棒Drop in Setting Tools象脚壁虎Elephant foot anchors水泥预埋件Concrete Insert翻边胀轴Drop in Anchor with Lip冲件Legs Drywall Anchors六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts 不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut 六角螺丝(栓) Hex Head Cap Screws(Hex Bolts)六角机械螺丝Hex Head Machine Bolts六角木牙螺丝Hex Lag Bolts四角螺丝Square Head BoltsT头螺丝T Head Bolts马车螺丝Carriage Bolts环首螺丝Eye Bolts内六角孔螺丝Hex Socket Cap Screws固定螺丝Set Screws螺椿栓Stud Bolts螺旋椿Screw Studs轮壳螺栓Wheel Bolts翼形螺丝Wing Screws自攻螺丝Self Tapping Screws自削螺丝Thread Cutting Screws钻尾螺丝Self Drilling Screws机械螺丝Machine Screws木螺丝Wood Screws家具螺丝Furniture Screws塑板螺丝Chipboard Screws墙用螺丝Drywall Screws基础螺栓Foundation BoltsU型螺栓U Bolts勾头螺栓Hook Bolts套挂螺丝Toggle Bolts突缘螺丝Flange Bolts轨道螺栓(鱼尾螺丝) Track Bolts耐候钢螺丝Corten Steel Heavy Hex Bolts扭矩控制螺栓T.C.Bolts高张力螺栓High Strength Bolts剪力钉(焊接螺丝) Welding Studs螺丝附华司组合Screws And Washers Assembled(Sems)大尺寸螺栓Big Size Bolts不锈钢小螺丝Stainless Steel Sheet Metal Screws不锈钢大螺丝Stainless Steel Bolts铝螺丝Aluminum Screws合金钢螺丝Alloy Steel Screws电子螺丝Electronic Screws微小精密螺丝Micro Screws塑料螺丝Plastic Screws复合材料用螺丝Particle Board Screws钛合金螺丝Titanium Alloy Bolts钛、锆、钼、铌等螺丝、零件、材料Ti,Zr,Mo,Nb Pare Metal Bolts Parts拇指螺丝Thumb Screws双头牙螺丝Double End Screws Hanger Bolt 车辆(汽车)螺丝、螺帽Automotive Fasteners 航天用螺丝Aerospace Fasteners飞机特殊扣件Source Control Bolts拉栓Blind Bolts面板螺丝Panel Fasteners电梯螺丝Elevator Bolts四角头固定螺丝Square Set Screws大头马车螺丝Step Bolts单向螺丝One Way Lag Screws管夹螺丝Hose Clamp Screws不锈钢固定螺丝Stainless Steel Hex Socket Cap Screws不锈钢内六角螺丝Stainless Steel Hex Socket Cap Screws铰链螺丝Hinge Screws货柜螺丝Container Screws复合材料钻尾螺丝Bi-Metal Self Drilling Screws三角牙螺丝Trilobular Thread Screws高低牙螺丝High Low Screws夹板用螺丝Particle Board Screws马桶螺丝Toilet Closet Bolts特长螺丝Special Longer Screws建业螺丝Building Fasteners不锈钢六角螺丝Stainless Steel Hex Socket Cap Screws其它特殊螺丝Special Screws Or Bolts不锈钢特殊螺丝Special Stainless Steel Screws宽牙螺丝（粗牙螺丝）Coarse Thread Screws 链带螺丝Collated Screws水泥螺丝Concrete Screws板模螺丝Construction Bolts锌蝶螺丝Die Cast Wing Screws; Zinc Alloy 重型车螺丝Heavy Duty Wheel Hub Bolts内六角固定螺丝Hex Socket Set Screws复合材料用螺丝（夹板用）Particle Board Screws犁壁螺丝Plow Bolts不锈钢木螺丝Stainless Steel Wood Screws 套挂螺栓及螺丝Toggle Bolts钛合金膨胀螺丝Titanium Alloy Expansion Bolts六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed CapNuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts 不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts锌压属螺帽Zinc Die Casting Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut合金钢线材盘元Alloy Steel Wire Rod球状化线材Annealing Wire And Rod黑铁丝Black Wire黄铜棒线Brass Wire And Rod磨光棒钢Bright Steel Bar(Hex/Round/Square)铜合金线Copper Alloy Wire线切割线 E.D.M Cutting Wire快削钢线材盘元Free Cutting Steel Wire Rod 线材Iron Or Steel Wire线材盘元Iron Or Steel Wire Rod洋白铜线Nickel Silver Wire磷青铜线Phosphate Bronze Wire不锈钢条棒Stainless Steel Bar(Round/Hex/Square)不锈钢冷锻线材Stainless Steel Cold Heading Wire不锈钢线(抽线后) Stainless Steel Draw Wire 不锈钢线材Stainless Steel Wire不锈钢线材及盘元Stainless Steel Wire And Rod棒钢Steel Bar(Hex/Round/Square)转回90度碾线头机90讧evolving Wire Twisting Machine气动拉钉机Air Riveter各式螺丝类产品自动包装Automatic Packaging For All Kinds Of Packaging自动包装机Automatic Packing Machine螺丝制造搓牙机械Automatic Thread Rolling Machine螺丝割尾加工机械Automatic Thread Slotting Machine螺丝制造成型机械Automatic Trimming Machine拉钉打头机Blind Rivet Heading Machine螺丝、螺帽成型机Bolt Formers,Nuts Formers,Headers螺丝、螺帽热处理Bolt Nut And Screws Heat Treatment螺丝、螺帽热处理炉Bolt Nut And Screws Heat Treatment Furnaces球状化电器炖炉Carburizing Furnace Vacuum And Bell Type Furnace超防锈复合瓷膜Ceramic Coating连续式光辉渗碳淬火炉Continuous Bright Carburizing Quenching Furnace连续式光辉调质淬火炉Continuous Bright Hardening Quenching Furnace中、高热镀锌光辉连续炉Continuous Bright Heat Treat Furnace连续式光辉热处理炉Continuous Type Bright Heat Treatment Furnace螺丝割尾及特殊割遘加工Machine Screw Shank Slotting螺丝钻孔加工Screw Shank Drilling鸡眼上下模Eyelets Dies一般线材、盘元、退火炉General Wire,Wire Rod,Annealing Furnace倒立式滑落型伸线机Handstand Type Wire Drawing Machine十字冲模Header Punches In Various Drives 成型冲模Header Punches In Various Drives 螺丝打头机Heading Machine螺丝制造高速搓牙机械High Speed Automatic Thread Rolling Machine高中低周波感应加热炉High,Medium,Low Frequency Induction Heater空心打头机Hollow Heading Machine热浸镀锌螺丝、螺帽Hot Dip Galvanizing Bolts And Nuts机械镀锌Mechanical Galvanized迷你成型机Mini-Formers成品自动收线机Non-Stop Coiler精抽自动收线机Non-Stop Coiler(Skinpass) 螺帽模Nut Forming Dies螺帽成型模Nuts Formers特殊零件成型机Parts Forming Maching冲模Punch Dies冲子Punch Pins罗拉成型机Rollers Formers机(踏)车用螺丝成型机Screw For Motorcycle Or Bicycle Heading Machine止付螺丝成型机Set Screws Formers套高成型机Sockets Formers一般线材、盘元、螺丝合金炖炉SpheroidizingBright Annealing Furnace球状化热处理炉Spheroidizing Heat Treatment Furnace攻牙机Tapping Machine螺丝攻、车刀、模具Taps Dies And Tools搓牙机铁屑分离装置Thread Chip Separator 滚牙轮Thread Rolling Dies牙板Thread Rolling Dies Plates精密油压滚牙机Hydraulic Thread Rolling Machines模具Tools六角整头模Trimming Dies Hexagan碳化钨模具Tungsten Carbide Die镀钛处理(Tin)专业加工服务Tin Hard Coating For Cutting Tools And Punch By Pvd电镀化学原料Various Electroplating Chemicals环规校正Calibration For Ring Gage环规、牙规、三线规校正Calibration For Ring Gage, Athread Gage, 3 Wire Gage螺丝、螺帽品检量测仪器Fasteners Inspection And Measurement Instruments螺丝、螺帽成型攻牙专用油Forming And Tapping Oils For Bolts And Nuts Formers螺丝、螺帽五金等检验Insptection Services For Fasteners And Hardware德国schatz扭力机代理Representative Of Schatz Torque MachinIso品质保证系统Iso Quality Assurance System生产管理系统Production Control System物料管理系统Material Control System齿轮Gears不锈钢牙条棒Stainless Steel Hread Rod马达轴承轴心组件Bearing Shaft(Motor)轴承轴心Bearing Shaft开口铆钉Blind Rivets长形拉帽Blind Rivet Nuts拉帽Blind Nuts拉钉Blind Rivets实心梢Clevis Pins And Straight Pins弹片Clips卷钉Coil Nails冷锻零件Cold Forming Part开口销Cotter PinsE型环E-Rings膨胀螺栓Expansion Anchor Bolts鸡眼钉Eyelets RivetsR型销Snap Pins闸、锁Latches And Keeper Assembleds其它特殊铆钉Other Specil Rivets销Pins格式管夹、管束Pipe Hanger铆钉Rivets螺旋锔及螺旋圈Screw Hook And Screw Rings中空钉Semi-Tubular Rivet开叉钉Split Drive Anchors弹簧华司Spring Washers弹簧蝴蝶夹Spring Wings不锈钢华司Stainlesssteel Washers钢铁钉Steel And Iron Nails搓牙铁钉Thread Nails钛合金铆钉Titaium Alloy Rivets管形铆钉Tubular Rivets华司Washers真空热处理Vacuum Heat Treatment螺丝、螺帽、五金、Diy扣件Fasteners合金钢工具Alloy Steel Tools螺栓模Bolt Heading Dies手动拉钉钳Hand Riveter船舶链Anchor Chain脚踏车链锁Bicycle Chain Locks螺丝起子Bit罗拉Chain Roller特殊铆合扣件Collars(A Blindfastener For Huck Intl)装饰链Decorative Chains自攻螺纹衬套Ensat Threaded Inserts六角扳手Hexagon Keys超音螺纹压入式螺纹自动锁扣Threaded Inserts For Plastic Injection Mouldeings汽车特殊杆接件Special Auto-Mobile Fastener As Your Needs螺纹护套Recoil Inserts链条用滚子Roller For Roller Chain金属板镶嵌组件及自动夹扣组件Sheet MetalFasteners工具套筒组件Socket Wrench Sets不锈钢链Stainless Steel Chains轭子T-Yoke轮胎链Tire Chains狗链Dog Chains喇叭头轭铁U-Yoke,T-Yoke For Speaker不锈钢输送带轮用轨道Stainless Wheel's Rack For Transporter工业用链Industrial Steel Link Chains拖链安全链Tow Chains And Safety Chains 机车离合器零件Manufacture Of Motorcycle's Cvt Parts牙条棒Thread Rod机(踏)车用螺丝、轴心Screws And Shafts For Motorcycle Or Bicycle针车用螺丝、轴心Screws And Shafts For Sewing Maching止付螺丝Socket Set Screws不锈钢宽牙螺丝Stainless Steel Coarse Thread Screws不锈钢高低牙螺丝Stainless Steel High-LowThread Screws不锈钢机械螺丝Stainless Steel Machine Screws不锈钢钻尾螺丝Stainless Steel Self Drilling Screws不锈钢自攻螺丝Stainless Steel Self Tapping Screws不锈钢自削螺丝Stainless Steel Thread Cutting Screws不锈钢三角牙螺丝Stainless Steel Tri-Lobular Thread Screws。
紧固件中英文对照
Description in Chinese 英文品名Desciption in English圆锥销Taper pins圆柱销Parallel pins开槽圆柱头螺钉Slotted cheese head screws开槽盘头螺钉Slotted pan head screws单耳止动垫圈Tab washers开口销Split cooter pins开槽半沉头木螺钉Slotted raised csk head wood screws 开槽半圆头木螺钉Slotted round head wood screws开槽沉头木螺钉Slotted countersunk head wood screws 平垫Plain washers平垫（带倒角）Mediun washers平垫Plain washers重型弹垫Spring lock washers,tang ends标准弹垫Spring lock washers,square ends鞍形弹垫Single coil spring lock washers弹簧止动垫圈Curved spring washers波形弹垫Wave spring washersT型方颈螺栓T-head blots with square neckT型双接头螺栓T-head bolts with double nip螺纹圆锥销Taper pins with threaded endT型头螺栓T-head bolts蝶型螺母（美制）Wing nuts America form蝶型螺母（德制）Wing nuts germany form蝶型螺母（美制）Wing screws America form蝶型螺母（德制）Wing screws germany form圆球型盖型螺母Ball knobs开槽带孔球面圆柱头蚴钉Slotted capstan screws开槽长圆柱端紧定螺钉Slotted set srews with full dog point开槽平端紧定螺钉（半牙）Slotted set srews with chamfered end 小六角特薄细牙螺母Pip nuts with thread外舌止动垫圈External tap小垫圈(用于圆柱头螺钉) Washers for cheese head screws方斜垫圈（U型）Square taper washers forU-section方斜垫圈（I型）Square taper washers forI-sections方垫圈Square washers开槽凹端紧定螺钉Slotted set with cup point六角薄螺母Hexagon thin nuts细牙六角薄螺母Hexagon thin nuts木螺钉专用垫圈Rounds washers for wood constructions密封帽Sealing caps,push-in type活节螺栓B型Eye bolts form B内舌止动垫圈Internal tab washers双耳止动垫圈Washers with two taps滚花高头螺钉Knurled thumb screws with collar开槽滚花高头螺钉Slotted knurled thumb screws with collar 滚花高螺母Knurled thumb nuts with collar滚花薄螺母Knurled thumb thin nuts锁紧垫圈Sealing washers轴用弹性垫圈Retaining rings for shafts(external),circlips孔用弹性垫圈Retaining rings for bores(internal),circlips方头带垫螺栓Square head bolts with collar方头圆柱底端螺栓Square head bolts with half dog point方头带垫关圆底端螺栓Square head bolts with collar,half dog pointT型槽螺母T-slot nuts单头螺柱Single end studs地脚螺栓Masonry bolts带槽圆螺母Slotted round nuts端面带孔圆螺母Round nuts with drilled holes in one face 开槽平端紧定螺钉Slotted set screws with flat point开槽锥端紧定螺钉Slotted set screws with cone point六角螺母Hexagon nuts方螺母-C Square nuts六角头螺钉Hexagon screws六角头圆柱端紧定螺钉Hexagon set screws with full dog point薄型方螺母-B Square nuts without bevel(pressed nuts)六角头木螺钉Hexgon head wood screw(coach screws)吊环螺钉Lifting eye bolts吊环螺母Lifting eye nuts圆锥型槽销Grooved pins,taper grooved圆锥型槽销（半槽）Grooved pins,taper grooved half length平行槽销（带倒角）Grooved pins,parallel grooved full length前端凹槽槽销Grooved pins,reverve grooved half length中部凹槽槽销Grooved pins,center grooved圆头槽销Grooved pins with round head沉头槽销Grooved pins with countersunk head六角螺母棒Turnuckles(center parts),made out of hexagon bar花蓝螺栓Turnuckles with eye bolt and hook bolt弹性圆柱销Spring pins,heavy type组合式盖型螺母Hexagon domed cap nuts开槽圆螺母(配合沟头扳手) Slotted round nuts for hook spammer圆螺母（带插销孔）Round nuts with set holes盘型弹簧垫圈Disc springs喉箍Hose clamps润滑油嘴（旋扭头）Lubricating nipples,button head管夹Shackles for conduiltsU型螺栓Stirrup bolts(U-bolts)球面垫圈Spherical washers,conical seats圆柱销Parallel pins厚六角螺母Hexagon nuts,1.5d厚六角法兰面螺母Hexagon nuts,1.5d with collar长六角螺母Hexagon nuts,3d外齿锁紧垫圈External teeth lock washers内齿锁紧垫圈Internal teeth lock washers外锯齿锁紧垫圈External teeth serrated lock washers内锯齿锁紧垫圈Internal teeth serrated lock washers开口挡圈Retaining rings for shafts(E-rings),circlips平键（A型）Parallel keys(form A)半圆键Woodruff keys嵌环（支撑环）Thimbles机器螺钉和垫圈组合件Screws and washers assemblies自攻螺钉和垫圈组合件Tapping screws and washer assemblies薄型带孔内六角圆柱螺钉Hexagon cocket head cap screws with hole,low head大六角头螺栓Hexagon head bolts with large head(friction grip nolts)大六角螺母Hexagon nuts with large wideth across flat(friction grip nuts)大垫圈Round washers for friction grip bolts楔型方垫圈Spuare taper washers for friction grip bolts on T-六角法兰面螺母Hexagon flange nuts全金属六角锁紧螺母（2型）Prevailing torque type hexagon nuts,all metallic nuts 轻型弹性圆柱销Spring pins,light type重型弹性圆柱销用垫圈Washers for bolts with heavy type spring pinssISO公制螺纹螺钉（多种头型）Thread forming screws for ISO-metric thread 自攻自钻螺钉（多种头型）Self-drilling tapping screws开槽切削螺纹螺钉（多种头型）Thread cutting screws十字槽切削螺纹螺钉（多种头型）Thread cutting screws cross recessT型四爪螺母Tee nuts with pronge钢结构用六角头螺栓连接副Hexagon head fitted bolts for steel structures开槽盘头自攻螺钉Pan head tapping screws with slot开槽沉头自攻螺钉countersunk flat head tapping screws with slot开槽半沉头自攻螺钉Raised sountersunk oval head tapping screws with slot六角头自攻螺钉Hexagon tapping screws圆柱头螺钉用弹簧垫圈Spring lock washers for screws with cylindrical heads十字槽盘头自攻螺攻Pan head tapping screws with cross recessed十字槽沉头自攻螺攻Countersunk flat head tapping screws with cross recessed十字槽半沉头自攻螺攻Raised countersunk oval head tapping screws with cross薄型内六角圆柱头螺钉Hexagon socket head cap screws with,reduced head十字槽盘头螺钉Pan head screws with cross recessed钢结构用垫圈Washers for steel structures钢结构用六角头螺栓Hexagon head bolts for steel structures内六角沉头螺钉Hexagon socket coutersunk head screws轴用钢丝挡圈Roundwire snap rings for shafts十字槽半沉头木螺钉Cross recessed raised countersunk head wood screws十字槽圆头木螺钉Cross recessed round head wood screws十字槽沉头木螺钉Cross recessed countersunk head wood screws螺纹护套(普通、自锁等) Ciol inserts,coarse,fine thread,silf locking大外径垫圈Washers,outside diameter appro.3d弹簧卡子sping cotter for a bolt平板螺栓Belting bolts(elevator bolts)干壁钉（墙板钉）Dry wall screws环型螺母Lifting nuts(eye nuts)圆螺母用止退垫圈Tab washer for slotted round nuts。
紧固件中英文术语对照
PLN SPEC
BRINELL
布氏硬度
ITEM
物品，项目
C.A.T
catalog 目录
dacromet
达克罗
projet
项目
SILVER plated 镀银
磷化处理
occur
发生，出现
side
侧面，旁边
show（shown） 显示，表示，表现，指
due
应到的，预期的，相当
EPAISSEUR
SIMLIAR exwarehouse（ex-works）出厂的 ex-wharf 码头交 货价格expire
有界
O.P.T
选择
PO
订单
MSA
测量系统分析
EA
重复性
C/A
SQL
DEPT
部门，科，系，局， 处，车间，工段（代
eyeblling
目测
adhesive strength
附着强度
adhesive force 附着力
Deactivation 钝化
MES
生产执行系统
tensile testwedge angles
A request for quotation
telphone
EST ANNUAL USAGE
DELTA MKS
一种涂层
CCP
特性控制计划
KFF
误差
ROH(德)coarse 粗糙
HHP
PO
订单号
CPK
过程能力指数
EP
PACT
合同
equivalent 等于
equal
等于
even
相等
plus
加上
percent
紧固件-中英文对照
紧固件-中英文对照紧固件-中英文对照No. 英文单词简写中文1 screw scr 螺丝2 nut nut 螺母3 washer wash 垫圈4 head hd 头5 thread thre 螺纹6 coating coat 镀层7 rivet riv 铆钉8 standoff stdoff 内外六角钉9 driver driv 穴10 hexagon hexa 六角11 tooth tooth 齿12 lock lck 锁13 spring spr 弹簧14 wave wave 波浪型15 pitch pitch 牙距16 partial thread PT 半螺纹17 PT PT 一种螺纹形式18 Full Thread FT 全螺纹19 silver silv 银20 cone cone 锥形21 Eco-syn Eco 30度牙的一种螺纹22 Thread Forming TF 自攻螺纹23 Self Tapping self tapp 自切屑螺纹24 pin pin 销25 shaft Shaf 轴26 steel St 铁27 stainless steel SS 不锈钢28 Brass(Cu) Bras(Cu) 铜29 Aluminum AL 铝30 Rubber Rub 橡胶31 machine screw mech scr 机制螺丝32 SEM screw SEM Scr 组合螺丝33 Material material 材料34 Grade GD 等级35 Finish Finish 表面处理36 Point Point 点37 Clamp Clam 夹子38 internal Int 内39 external ext 外40 thickness / 厚度41 length / 长度42 hole / 孔43 Metric Metcric 公制44 DIN / 德标45 ANSI / 美标46 JIS / 日标螺丝相关参数英语对照A: Machine Screw: 机械螺丝B: Tapping Screw: 自攻螺丝(分使用于金属与使用于塑料二种)B-1: Sheet Metal Tapping Screw. (铁板牙自攻螺丝)B-2: Plastic Tapping Screw. ( 塑料用, 自攻螺丝)C: Wooden Screw : 木工螺丝D: Drywall Screw : 水泥墙螺丝常见螺丝材质:a.Low Carbon Steel :低碳钢b. SS-304 : Stainless Steel 304c. SS-302: Stainless Steel 302 :结构韧性较好d. Aluminum 5052 :铝合金5052d. Brass: 黄铜e. Bronze: 青铜f. UNS C11000 Copper: 锑铜Finish Code: 外观处理规格Head Code: 头部外型螺丝型号Drive Code: 头部剖沟,特征型号Length Code: 螺丝长度(mm)A-1: Thread Code: 螺丝型号A-2: Length Code: 螺丝长度:A-3: Drive Code/ 头部剖沟,特征.a. Slotted: 一字( Minus )b. Phillips: 十字( Plus )c. Phil-Slot: 一字/十字d. Hex Scoket: 内六角e. One Way: 单向(只可锁入,不可退出) A-4: Head Code/ 头部外型.a. Flat: 平头(锁入后,顶部与工作件齐平)b. Oval: 色拉头c. Round: 圆头d. Pan: 圆扁头e. Truss: 大圆扁头f. Hex : 六角头A-5: Finish Code/ 外观处理.a. Z: Zine-Plated: 镀锌b. Ni: Ni-Plated: 镀镍c. Tin-Plated: 镀锡d. Zine Plated / Green Iridite: 镀锌绿膜处理.e. Radiant Plated: 镀五彩f. Passivate: 抗氧化处理.g. Alodial Finish: 无外观处理螺纹大径：Major Diam螺纹中径：Pitch diam螺纹底径：Minor diam通止规：Go/No go gage机械性能：mechanical and physical propertiesunified thread 统一英制螺纹Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement 镀后去氢，防止氢脆Case carburization 表面渗碳With across flats 对边With across corners 对角Radius of fillet:头下圆角Transition thread length 过度螺纹Wrenching height 扳拧高度Rockwell 铬氏硬度Vickers 维氏硬度Brinell 布氏硬度Metallography microscope 金相显微镜Salt spray device 盐雾试验箱Tensile testing machine 拉力试验机Cold forming 冷打Hot forging 红镦P C 8 = property class 8 机械性能8级原材料：Raw material球化退火：Annealing冷拔：Drawing冷镦：Forming机加工：Machining螺纹成型：Roll Threading热处理：heat-treatment表面处理：finish去氢：Lustrating hydrogen检验：Inspection包装：Packing入库：Stocking车床：lathe磨制：grinding红打：hot forging冲压：punchingDiameter 直径Length 长度各类紧固件标准件产品英语翻译对照插片壁虎Steel Ceiling Anchors内迫壁虎Drop in Anchors碳钢锤钉壁虎Steel Hit Anchors碳钢六角螺帽Steel Hex Coupling Nuts强力车修壁虎Wedge Anchors外迫壁虎Cut Anchors化学壁虎Chemical Anchors不锈钢重载胀栓Heavy Duty Expansion Anchors鱼眼壁虎企眼长螺帽Tie Wire Anchors锌合金打入式壁虎Hammer Drive Anchors弹簧螺帽Strut Nuts兰花夹系列Toggle Bolts (Spring Toggle & Gravity Toggle)门窗、地板专用壁虎Nylon Frame Anchors or Metalframe Anchors石膏板中空壁虎Hollow Wall Anchors套管式壁虎Sleeve Anchors打入式壁虎鱼形尼龙壁虎Nylon Frame Harmmer Fixing (Nylon Hammer Drive Anchors)强力式锤钉壁虎Hit Anchors电梯壁虎Bolt Anchors重载壁虎Heavy duty anchors两片夹Loxin Masonry Anchors定位螺栓Set Bolts长型兰花夹Short Strap Anchors工具棒Drop in Setting Tools象脚壁虎Elephant foot anchors水泥预埋件Concrete Insert翻边胀轴Drop in Anchor with Lip冲件Legs Drywall Anchors六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts 不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut 六角螺丝(栓) Hex Head Cap Screws(Hex Bolts)六角机械螺丝Hex Head Machine Bolts六角木牙螺丝Hex Lag Bolts四角螺丝Square Head BoltsT头螺丝T Head Bolts马车螺丝Carriage Bolts环首螺丝Eye Bolts内六角孔螺丝Hex Socket Cap Screws固定螺丝Set Screws螺椿栓Stud Bolts螺旋椿Screw Studs轮壳螺栓Wheel Bolts翼形螺丝Wing Screws自攻螺丝Self Tapping Screws自削螺丝Thread Cutting Screws钻尾螺丝Self Drilling Screws机械螺丝Machine Screws木螺丝Wood Screws家具螺丝Furniture Screws塑板螺丝Chipboard Screws墙用螺丝Drywall Screws基础螺栓Foundation BoltsU型螺栓U Bolts勾头螺栓Hook Bolts套挂螺丝Toggle Bolts突缘螺丝Flange Bolts轨道螺栓(鱼尾螺丝) Track Bolts耐候钢螺丝Corten Steel Heavy Hex Bolts扭矩控制螺栓T.C.Bolts高张力螺栓High Strength Bolts剪力钉(焊接螺丝) Welding Studs螺丝附华司组合Screws And Washers Assembled(Sems)大尺寸螺栓Big Size Bolts不锈钢小螺丝Stainless Steel Sheet Metal Screws不锈钢大螺丝Stainless Steel Bolts铝螺丝Aluminum Screws合金钢螺丝Alloy Steel Screws电子螺丝Electronic Screws微小精密螺丝Micro Screws塑料螺丝Plastic Screws复合材料用螺丝Particle Board Screws钛合金螺丝Titanium Alloy Bolts钛、锆、钼、铌等螺丝、零件、材料Ti,Zr,Mo,Nb Pare Metal Bolts Parts拇指螺丝Thumb Screws双头牙螺丝Double End Screws Hanger Bolt 车辆(汽车)螺丝、螺帽Automotive Fasteners 航天用螺丝Aerospace Fasteners飞机特殊扣件Source Control Bolts拉栓Blind Bolts面板螺丝Panel Fasteners电梯螺丝Elevator Bolts四角头固定螺丝Square Set Screws大头马车螺丝Step Bolts单向螺丝One Way Lag Screws管夹螺丝Hose Clamp Screws不锈钢固定螺丝Stainless Steel Hex Socket Cap Screws不锈钢内六角螺丝Stainless Steel Hex Socket Cap Screws铰链螺丝Hinge Screws货柜螺丝Container Screws复合材料钻尾螺丝Bi-Metal Self Drilling Screws三角牙螺丝Trilobular Thread Screws高低牙螺丝High Low Screws夹板用螺丝Particle Board Screws马桶螺丝Toilet Closet Bolts特长螺丝Special Longer Screws建业螺丝Building Fasteners不锈钢六角螺丝Stainless Steel Hex Socket Cap Screws其它特殊螺丝Special Screws Or Bolts不锈钢特殊螺丝Special Stainless Steel Screws宽牙螺丝（粗牙螺丝）Coarse Thread Screws 链带螺丝Collated Screws水泥螺丝Concrete Screws板模螺丝Construction Bolts锌蝶螺丝Die Cast Wing Screws; Zinc Alloy 重型车螺丝Heavy Duty Wheel Hub Bolts内六角固定螺丝Hex Socket Set Screws复合材料用螺丝（夹板用）Particle Board Screws犁壁螺丝Plow Bolts不锈钢木螺丝Stainless Steel Wood Screws 套挂螺栓及螺丝Toggle Bolts钛合金膨胀螺丝Titanium Alloy Expansion Bolts六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed CapNuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts 不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts锌压属螺帽Zinc Die Casting Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut合金钢线材盘元Alloy Steel Wire Rod球状化线材Annealing Wire And Rod黑铁丝Black Wire黄铜棒线Brass Wire And Rod磨光棒钢Bright Steel Bar(Hex/Round/Square)铜合金线Copper Alloy Wire线切割线 E.D.M Cutting Wire快削钢线材盘元Free Cutting Steel Wire Rod 线材Iron Or Steel Wire线材盘元Iron Or Steel Wire Rod洋白铜线Nickel Silver Wire磷青铜线Phosphate Bronze Wire不锈钢条棒Stainless Steel Bar(Round/Hex/Square)不锈钢冷锻线材Stainless Steel Cold Heading Wire不锈钢线(抽线后) Stainless Steel Draw Wire 不锈钢线材Stainless Steel Wire不锈钢线材及盘元Stainless Steel Wire And Rod棒钢Steel Bar(Hex/Round/Square)转回90度碾线头机90讧evolving Wire Twisting Machine气动拉钉机Air Riveter各式螺丝类产品自动包装Automatic Packaging For All Kinds Of Packaging自动包装机Automatic Packing Machine螺丝制造搓牙机械Automatic Thread Rolling Machine螺丝割尾加工机械Automatic Thread Slotting Machine螺丝制造成型机械Automatic Trimming Machine拉钉打头机Blind Rivet Heading Machine螺丝、螺帽成型机Bolt Formers,Nuts Formers,Headers螺丝、螺帽热处理Bolt Nut And Screws Heat Treatment螺丝、螺帽热处理炉Bolt Nut And Screws Heat Treatment Furnaces球状化电器炖炉Carburizing Furnace Vacuum And Bell Type Furnace超防锈复合瓷膜Ceramic Coating连续式光辉渗碳淬火炉Continuous Bright Carburizing Quenching Furnace连续式光辉调质淬火炉Continuous Bright Hardening Quenching Furnace中、高热镀锌光辉连续炉Continuous Bright Heat Treat Furnace连续式光辉热处理炉Continuous Type Bright Heat Treatment Furnace螺丝割尾及特殊割遘加工Machine Screw Shank Slotting螺丝钻孔加工Screw Shank Drilling鸡眼上下模Eyelets Dies一般线材、盘元、退火炉General Wire,Wire Rod,Annealing Furnace倒立式滑落型伸线机Handstand Type Wire Drawing Machine十字冲模Header Punches In Various Drives 成型冲模Header Punches In Various Drives 螺丝打头机Heading Machine螺丝制造高速搓牙机械High Speed Automatic Thread Rolling Machine高中低周波感应加热炉High,Medium,Low Frequency Induction Heater空心打头机Hollow Heading Machine热浸镀锌螺丝、螺帽Hot Dip Galvanizing Bolts And Nuts机械镀锌Mechanical Galvanized迷你成型机Mini-Formers成品自动收线机Non-Stop Coiler精抽自动收线机Non-Stop Coiler(Skinpass) 螺帽模Nut Forming Dies螺帽成型模Nuts Formers特殊零件成型机Parts Forming Maching冲模Punch Dies冲子Punch Pins罗拉成型机Rollers Formers机(踏)车用螺丝成型机Screw For Motorcycle Or Bicycle Heading Machine止付螺丝成型机Set Screws Formers套高成型机Sockets Formers一般线材、盘元、螺丝合金炖炉SpheroidizingBright Annealing Furnace球状化热处理炉Spheroidizing Heat Treatment Furnace攻牙机Tapping Machine螺丝攻、车刀、模具Taps Dies And Tools搓牙机铁屑分离装置Thread Chip Separator 滚牙轮Thread Rolling Dies牙板Thread Rolling Dies Plates精密油压滚牙机Hydraulic Thread Rolling Machines模具Tools六角整头模Trimming Dies Hexagan碳化钨模具Tungsten Carbide Die镀钛处理(Tin)专业加工服务Tin Hard Coating For Cutting Tools And Punch By Pvd电镀化学原料Various Electroplating Chemicals环规校正Calibration For Ring Gage环规、牙规、三线规校正Calibration For Ring Gage, Athread Gage, 3 Wire Gage螺丝、螺帽品检量测仪器Fasteners Inspection And Measurement Instruments螺丝、螺帽成型攻牙专用油Forming And Tapping Oils For Bolts And Nuts Formers螺丝、螺帽五金等检验Insptection Services For Fasteners And Hardware德国schatz扭力机代理Representative Of Schatz Torque MachinIso品质保证系统Iso Quality Assurance System生产管理系统Production Control System物料管理系统Material Control System齿轮Gears不锈钢牙条棒Stainless Steel Hread Rod马达轴承轴心组件Bearing Shaft(Motor)轴承轴心Bearing Shaft开口铆钉Blind Rivets长形拉帽Blind Rivet Nuts拉帽Blind Nuts拉钉Blind Rivets实心梢Clevis Pins And Straight Pins弹片Clips卷钉Coil Nails冷锻零件Cold Forming Part开口销Cotter PinsE型环E-Rings膨胀螺栓Expansion Anchor Bolts鸡眼钉Eyelets RivetsR型销Snap Pins闸、锁Latches And Keeper Assembleds其它特殊铆钉Other Specil Rivets销Pins格式管夹、管束Pipe Hanger铆钉Rivets螺旋锔及螺旋圈Screw Hook And Screw Rings中空钉Semi-Tubular Rivet开叉钉Split Drive Anchors弹簧华司Spring Washers弹簧蝴蝶夹Spring Wings不锈钢华司Stainlesssteel Washers钢铁钉Steel And Iron Nails搓牙铁钉Thread Nails钛合金铆钉Titaium Alloy Rivets管形铆钉Tubular Rivets华司Washers真空热处理Vacuum Heat Treatment螺丝、螺帽、五金、Diy扣件Fasteners合金钢工具Alloy Steel Tools螺栓模Bolt Heading Dies手动拉钉钳Hand Riveter船舶链Anchor Chain脚踏车链锁Bicycle Chain Locks螺丝起子Bit罗拉Chain Roller特殊铆合扣件Collars(A Blindfastener For Huck Intl)装饰链Decorative Chains自攻螺纹衬套Ensat Threaded Inserts六角扳手Hexagon Keys超音螺纹压入式螺纹自动锁扣Threaded Inserts For Plastic Injection Mouldeings汽车特殊杆接件Special Auto-Mobile Fastener As Your Needs螺纹护套Recoil Inserts链条用滚子Roller For Roller Chain金属板镶嵌组件及自动夹扣组件Sheet MetalFasteners工具套筒组件Socket Wrench Sets不锈钢链Stainless Steel Chains轭子T-Yoke轮胎链Tire Chains狗链Dog Chains喇叭头轭铁U-Yoke,T-Yoke For Speaker不锈钢输送带轮用轨道Stainless Wheel's Rack For Transporter工业用链Industrial Steel Link Chains拖链安全链Tow Chains And Safety Chains 机车离合器零件Manufacture Of Motorcycle's Cvt Parts牙条棒Thread Rod机(踏)车用螺丝、轴心Screws And Shafts For Motorcycle Or Bicycle针车用螺丝、轴心Screws And Shafts For Sewing Maching止付螺丝Socket Set Screws不锈钢宽牙螺丝Stainless Steel Coarse Thread Screws不锈钢高低牙螺丝Stainless Steel High-LowThread Screws不锈钢机械螺丝Stainless Steel Machine Screws不锈钢钻尾螺丝Stainless Steel Self Drilling Screws不锈钢自攻螺丝Stainless Steel Self Tapping Screws不锈钢自削螺丝Stainless Steel Thread Cutting Screws不锈钢三角牙螺丝Stainless Steel Tri-Lobular Thread Screws。
常用紧固件行业相关术语(中英对照)简体
组装、冲压、喷漆等专业词匯Assembly line组装线Layout布置图Conveyer流水线物料板Rivet table拉钉机Rivet gun拉钉枪Screw driver起子Electric screw driver电动起子Pneumatic screw driver气动起子worktable 工作桌OOBA开箱检查fit together组装在一起fasten锁紧(螺丝)fixture 夹具(治具)pallet栈板barcode条码barcode scanner条码扫描器fuse together熔合fuse machine热熔机repair修理operator作业员QC品管supervisor 课长ME制造工程师MT制造生技cosmetic inspect外观检查inner parts inspect内部检查thumb screw大头螺丝lbs. inch镑、英寸EMI gasket导电条front plate前板rear plate后板chassis 基座bezel panel面板power button电源按键reset button重置键Hi-pot test of SPS高源高压测试Voltage switch of SPS电源电压接拉键sheet metal parts 冲件plastic parts塑胶件SOP制造作业程序material check list物料检查表work cell工作间trolley臺车carton纸箱sub-line支线left fork叉车personnel resource department人力资源部production department生產部门planning department企划部QC Section品管科stamping factory冲压厂painting factory烤漆厂molding factory成型厂common equipment常用设备uncoiler and straightener整平机punching machine 冲床robot机械手hydraulic machine油压机lathe车床planer |'plein?|刨床miller铣床grinder磨床driller??床linear cutting线切割electrical sparkle电火花welder电焊机staker=reviting machine铆合机position职务president董事长general manager总经理special assistant manager特助factory director厂长department director部长deputy manager | =vice manager副理section supervisor课长deputy section supervisor =vice section superisor副课长group leader/supervisor组长line supervisor线长assistant manager助理to move, to carry, to handle搬运be put in storage入库pack packing包装to apply oil擦油to file burr 銼毛刺final inspection终检to connect material接料to reverse material 翻料wet station沾湿臺Tiana天那水cleaning cloth抹布to load material上料to unload material卸料to return material/stock to退料scraped |'skr?pid|报废scrape ..v.刮;削deficient purchase来料不良manufacture procedure制程deficient manufacturing procedure制程不良oxidation |' ksi'dei?n|氧化scratch刮伤dents压痕defective upsiding down抽芽不良defective to staking铆合不良embedded lump镶块feeding is not in place送料不到位stamping-missing漏冲production capacity生產力education and training教育和训练proposal improvement提案改善spare parts=buffer备件forklift叉车trailer=long vehicle拖板车compound die合模die locker锁模器pressure plate=plate pinch压板bolt螺栓name of a department部门名称administration/general affairs dept总务部automatic screwdriver电动啟子thickness gauge厚薄规gauge(or jig)治具power wire电源线buzzle蜂鸣器defective product label不良标签identifying sheet list标示单screwdriver holder起子插座pedal踩踏板stopper阻挡器flow board流水板hydraulic handjack油压板车forklift叉车pallet栈板glove(s)手套glove(s) with exposed fingers割手套thumb大拇指forefinger食指midfinger中指ring finger无名指little finger小指band-aid创可贴iudustrial alcohol工业酒精alcohol container沾湿臺head of screwdriver起子头sweeper扫把mop拖把vaccum cleaner吸尘器rag 抹布garbage container灰箕garbage can垃圾箱garbage bag垃圾袋chain链条jack升降机production line流水线chain链条槽magnetizer加磁器lamp holder灯架to mop the floor拖地to clean the floor扫地to clean a table擦桌子air pipe 气管packaging tool打包机packaging打包missing part漏件wrong part错件excessive defects过多的缺陷critical defect极严重缺陷major defect主要缺陷minor defect次要缺陷not up to standard不合规格dimension/size is a little bigger尺寸偏大(小) cosmetic defect外观不良slipped screwhead/slippery screw head螺丝滑头slipped screwhead/shippery screw thread滑手speckle斑点mildewed=moldy=mouldy发霉rust生銹deformation变形burr(金属)flash(塑件)毛边poor staking铆合不良excesssive gap间隙过大grease/oil stains油污inclusion杂质painting peel off臟污shrinking/shrinkage缩水mixed color杂色scratch划伤poor processing 制程不良poor incoming part事件不良fold of pakaging belt打包带折皱painting make-up补漆discoloration羿色water spots水渍polishing/surface processing表面处理exposed metal/bare metal金属裸露lack of painting烤漆不到位safety安全quality品质delivery deadline交货期cost成本engineering工程die repair模修enterprise plan = enterprise expansion projects企划QC品管die worker模工production, to produce生產equipment设备to start a press开机stop/switch off a press关机classification整理regulation整顿cleanness清扫conservation清洁culture教养qualified products, up-to-grade products良品defective products, not up-to-grade products不良品waste废料board看板feeder送料机sliding rack滑料架defective product box不良品箱die change 换模to fix a die装模to take apart a die拆模to repair a die修模packing material包材basket蝴蝶竺plastic basket胶筐isolating plate baffle plate; barricade隔板carton box纸箱to pull and stretch拉深to put material in place, to cut material, to input落料to impose lines压线to compress, compressing压缩character die字模to feed, feeding送料transportation运输(be)qualfied, up to grade合格not up to grade, not qualified不合格material change, stock change材料变更feature change 特性变更evaluation评估prepare for, make preparations for 準备parameters参数rotating speed, revolution转速manufacture management制造管理abnormal handling异常处理production unit生產单位lots of production生產批量steel plate钢板roll material卷料manufacture procedure制程operation procedure作业流程to revise, modify修订to switch over to, switch---to throw--over switching over切换engineering, project difficulty工程瓶颈stage die工程模automation自动化to stake, staking, reviting铆合add lubricating oil加润滑油shut die架模shut height of a die架模高度analog-mode device类模器die lifter举模器argon welding氬焊vocabulary for stamping冲压常词匯stamping, press冲压punch press, dieing out press冲床uncoiler & strainghtener整平机feeder送料机rack, shelf, stack料架cylinder油缸robot机械手taker取料机conveyer belt输送带transmission rack输送架top stop上死点bottom stop下死点one stroke一行程inch寸动to continue, cont.连动to grip(material)吸料location lump, locating piece, block stop 定位块reset復位smoothly顺利dent压痕scratch刮伤deformation变形filings铁削to draw holes抽孔inquiry, search for查寻to stock, storage, in stock库存receive领取approval examine and verify审核processing, to process加工delivery, to deliver 交货to return delivenry to.to send delinery backto retrn of goods退货registration登记registration card登记卡to control管制to put forward and hand in提报safe stock安全库存acceptance = receive验收to notice通知application form for purchase请购单consume, consumption消耗to fill in填写abrasion磨损reverse angle = chamfer倒角character die字模to collect, to gather收集failure, trouble故障statistics统计demand and supply需求career card履歷卡to take apart a die卸下模具to load a die装上模具to tight a bolt拧紧螺栓to looser a bolt拧松螺栓to move away a die plate移走模板easily damaged parts易损件standard parts标準件breaking.(be)broken,(be)cracked 断裂to lubricate润滑common vocabulary for die engineering 模具工程常用词匯die 模具figure file, chart file图档cutting die, blanking die冲裁模progressive die, follow (-on)die连续模compound die復合模punched hole冲孔panel board镶块to cutedges=side cut=side scrap切边to bending折弯to pull, to stretch拉伸Line streching, line pulling线拉伸engraving, to engrave刻印upsiding down edges翻边to stake铆合designing, to design设计design modification设计变化die block模块folded block折弯块sliding block滑块location pin定位销lifting pin顶料销die plate, front board模板padding block垫块stepping bar垫条upper die base上模座lower die base下模座upper supporting blank上承板upper padding plate blank上垫板spare dies模具备品spring 弹簧bolt螺栓document folder文件夹file folder资料夹to put file in order整理资料spare tools location手工备品仓first count初盘人first check初盘復棹人second count 復盘人second check復盘復核人equipment设备waste materials废料work in progress product在制品casing = containerazation装箱quantity of physical invetory second count 復盘点数量quantity of customs count会计师盘,点数量the first page第一联filed by accounting department for reference会计部存查end-user/using unit(department)使用单位summary of year-end physical inventory bills年终盘点截止单据匯总表bill name单据名称This sheet and physical inventory list will be sent to accounting department together (Those of NHK will be sent to financial department)本表请和盘点清册一起送会计部－(NHK厂区送财会部)Application status records of year-end physical inventory List and physical inventory card 年终盘点卡和清册使用－状况明细表blank and waste sheet NO.空白和作废单号plate电镀mold成型material for engineering mold testing工程试模材料not included in physical inventory不列入盘点sample样品incoming material to be inspected进货待验description品名steel/rolled steel钢材material statistics sheet物料统计明细表meeting minutes会议记录meeting type 会别distribution department分发单位location地点chairman主席present members出席人员subject主题conclusion结论decision items决议事项responsible department负责单位pre-fixed finishing date预定完成日approved by / checked by / prepared by核準/审核/承办PCE assembly production schedule sheetPCE组装厂生產排配表model机钟work order工令revision版次remark备注production control confirmation生產确认checked by初审approved by核準department部门stock age analysis sheet库存货龄分析表on-hand inventory现有库存available material良品可使用obsolete material良品已呆滞to be inspected or reworked待验或重工total合计cause description原因说明part number/ P/N 料号type形态item/group/class类别quality品质prepared by制表notes说明year-end physical inventory difference analysis sheet年终盘点差异分析表physical inventory盘点数量physical count quantity帐面数量difference quantity差异量cause analysis原因分析raw materials原料materials物料finished product成品semi-finished product半成品packing materials包材good product/accepted goods/ accepted parts/good parts良品defective product/non-good parts不良品disposed goods处理品warehouse/hub仓库on way location在途仓oversea location海外仓spare parts physical inventory list备品盘点清单spare molds location模具备品仓skid/pallet栈板tox machine自铆机wire EDM线割EDM放电机coil stock卷料sheet stock片料tolerance工差score=groove压线cam block滑块pilot导正筒trim剪外边pierce剪内边drag form压锻差pocket for the punch head掛鉤槽slug hole废料孔feature die公母模expansion dwg展开图radius半径shim(wedge)楔子torch-flame cut火焰切割set screw止付螺丝form block折刀stop pin定位销round pierce punch=die button圆冲子shape punch=die insert异形子stock locater block定位块under cut=scrap chopper清角active plate活动板baffle plate挡块cover plate盖板male die公模female die母模groove punch压线冲子air-cushion eject-rod气垫顶桿spring-box eject-plate弹簧箱顶板bushing block衬套insert 入块club car高尔夫球车capability能力parameter参数factor系数phosphate皮膜化成viscosity涂料粘度alkalidipping脱脂main manifold主集流脉bezel斜视规blanking穿落模dejecting顶固模demagnetization去磁;消磁high-speed transmission高速传递heat dissipation热传rack上料degrease脱脂rinse水洗alkaline etch龄咬desmut剥黑膜D.I. rinse纯水次Chromate铬酸处理Anodize阳性处理seal封孔revision版次part number/P/N料号good products良品scraped products报放心品defective products不良品finished products成品disposed products处理品barcode条码flow chart流程表单assembly组装stamping冲压molding成型spare parts=buffer备品coordinate座标dismantle the die折模auxiliary fuction辅助功能poly-line多义线heater band 加热片thermocouple热电偶sand blasting喷沙grit 砂砾derusting machine除銹机degate打浇口dryer烘干机induction感应induction light感应光response=reaction=interaction感应ram连桿edge finder巡边器concave凸convex凹short射料不足nick缺口speck瑕??shine亮班splay 银纹gas mark焦痕delamination起鳞cold slug冷块blush 导色gouge沟槽;凿槽satin texture段面咬花witness line证示线patent专利grit沙砾granule=peuet=grain细粒grit maker抽粒机cushion缓冲magnalium镁铝合金magnesium镁金metal plate鈑金lathe车mill銼plane刨grind磨drill铝boring鏜blinster气泡fillet镶;嵌边through-hole form通孔形式voller pin formality滚针形式cam driver铡楔shank摸柄crank shaft曲柄轴augular offset角度偏差velocity速度production tempo生產进度现状torque扭矩spline=the multiple keys花键quenching淬火tempering回火annealing退火carbonization碳化alloy合金tungsten high speed steel钨高速的moly high speed steel鉬高速的organic solvent有机溶剂bracket小磁导liaison联络单volatile挥发性resistance电阻ion离子titrator滴定仪beacon警示灯coolant冷却液crusher破碎机模具工程类plain die简易模pierce die冲孔模forming die成型模progressive die连续模gang dies復合模shearing die剪边模riveting die铆合模pierce冲孔forming成型(抽凸,冲凸)draw hole抽孔bending折弯trim切边emboss凸点dome凸圆semi-shearing半剪stamp mark冲记号deburr or coin压毛边punch riveting冲压铆合side stretch侧冲压平reel stretch卷圆压平groove压线blanking下料stamp letter冲字(料号) shearing剪断tick-mark nearside正面压印tick-mark farside反面压印冲压名称类extension dwg展开图procedure dwg工程图die structure dwg模具结构图material材质material thickness料片厚度factor系数upward向上downward向下press specification冲床规格die height range适用模高die height闭模高度burr毛边gap间隙weight重量total wt.总重量punch wt.上模重量五金零件类inner guiding post内导柱inner hexagon screw内六角螺钉dowel pin固定销coil spring弹簧lifter pin顶料销eq-height sleeves=spool等高套筒pin销lifter guide pin浮升导料销guide pin导正销wire spring圆线弹簧outer guiding post外导柱stop screw止付螺丝located pin定位销outer bush外导套模板类top plate上托板（顶板）top block上垫脚punch set上模座punch pad上垫板punch holder上夹板stripper pad脱料背板up stripper上脱料板male die公模(凸模)feature die公母模female die母模(凹模)upper plate上模板lower plate下模板die pad下垫板die holder下夹板die set下模座bottom block下垫脚bottom plate下托板(底板)stripping plate内外打(脱料板)outer stripper外脱料板inner stripper内脱料板lower stripper下脱料板零件类punch冲头insert入块(嵌入件)deburring punch压毛边冲子groove punch压线冲子stamped punch字模冲子round punch圆冲子special shape punch异形冲子bending block折刀roller滚轴baffle plate挡块located block定位块supporting block for location定位支承块air cushion plate气垫板air-cushion eject-rod气垫顶桿trimming punch切边冲子stiffening rib punch = stinger 加强筋冲子ribbon punch压筋冲子reel-stretch punch卷圆压平冲子guide plate定位板sliding block滑块sliding dowel block滑块固定块active plate活动板lower sliding plate下滑块板upper holder block上压块upper mid plate上中间板spring box弹簧箱spring-box eject-rod弹簧箱顶桿spring-box eject-plate弹簧箱顶板bushing bolck衬套cover plate盖板guide pad导料块塑件&模具相关英文compre sion molding压缩成型flash mold溢流式模具plsitive mold挤压式模具split mold分割式模具cavity型控母模core模心公模taper锥拔leather cloak仿皮革shiver饰纹flow mark流痕welding mark溶合痕post screw insert螺纹套筒埋值self tapping screw自攻螺丝striper plate脱料板piston活塞cylinder汽缸套chip细碎物handle mold手持式模具移转成型用模具encapsulation molding低压封装成型射出成型用模具two plate两极式（模具）well type蓄料井insulated runner绝缘浇道方式hot runner热浇道runner plat浇道模块valve gate阀门浇口band heater环带状的电热器spindle阀针spear head刨尖头slag well冷料井cold slag冷料渣air vent排气道h=0.02~0.05mmw=3.2mmL=3~5mmwelding line熔合痕eject pin顶出针knock pin顶出销return pin回位销反顶针sleave套筒stripper plate脱料板insert core放置入子runner stripper plate浇道脱料板guide pin导销eject rod (bar)（成型机）顶业捧subzero深冷处理three plate三极式模具runner system浇道系统stress crack应力电裂orientation定向sprue gate射料浇口，直浇口nozzle射嘴sprue lock pin料头鉤销(拉料桿) slag well冷料井side gate侧浇口edge gate侧缘浇口tab gate搭接浇口film gate薄膜浇口flash gate闸门浇口slit gate缝隙浇口fan gate扇形浇口dish gate因盘形浇口H=F=1/2t~1/5tT=2.5~3.5mmdiaphragm gate隔膜浇口ring gate环形浇口subarine gate潜入式浇口tunnel gate隧道式浇口pin gate针点浇口Φ0.8~1.0mmRunner less无浇道(sprue less)无射料管方式long nozzle延长喷嘴方式sprue浇口;溶渣品质人员名称类QC quality control 品质管理人员FQC final quality control 终点品质管制人员IPQC in process quality control 制程中的品质管制人员OQC output quality control 最终出货品质管制人员IQC incoming quality control 进料品质管制人员TQC total quality control 全面质量管理POC passage quality control 段检人员QA quality assurance 质量保证人员OQA output quality assurance 出货质量保证人员QE quality engineering 品质工程人员品质保证类FAI first article inspection 新品首件检查FAA first article assurance 首件确认TVR tool verification report 模具确认报告3B 3B 模具正式投產前确认CP capability index 能力指数CPK capability index of process 模具制程能力参数SSQA standardized supplier quality 合格供应商品质评估OOBA out of box audit 开箱检查QFD quality function deployment 品质机能展开FMEA failure model effectiveness analysis 失效模式分析8 disciplines 8项回復内容FA final audit 最后一次稽核CAR corrective action request 改正行动要求corrective action report 改正行动报告FQC运作类AQL Acceptable Quality Level 运作类允收品质水準S/S Sample size 抽样检验样本大小ACC Accept 允收REE Reject 拒收CR Critical 极严重的MAJ Major 主要的MIN Minor 轻微的AOQ Average Output Quality 平均出厂品质AOQL Average Output Quality Level 平均出厂品质Q/R/S Quality/Reliability/Service 品质/可靠度服务MIL-STD Military-Standard 军用标準S I-S IV Special I-Special IV 特殊抽样水準等级P/N Part Number 料号L/N Lot Number 特采AOD Accept On Deviation 特采UAI Use As It 首件检查报告FPIR First Piece Inspection Report 百万分之一PPM Percent Per Million 批号制程统计品管专类SPC Statistical Process Control 统计制程管制SQC Statistical Quality Control 统计品质管制R Range 全距AR Averary Range 全距平均值UCL Upper Central Limit 管制上限LCL Lower Central Limit 管制下限MAX Maximum 最大值MIN Minimum 最小值GRR Gauge Reproducibility&Repeatability 量具之再制性及重测性判断量可靠和否DIM Dimension 尺寸DIA Diameter 直径FREQ Frequency 频率N Number 样品数其它品质术语类QCC Quality Control Circle 品质圈QIT Quality Improvement Team 品质改善小组PDCA Plan Do Check Action 计划执行检查总结ZD Zero Defect 零缺点QI Quality Improvement 品质改善QP Quality Policy 目标方针TQM Total Quality Management 全面品质管理MRB Material Reject Bill 退货单LQL Limiting Quality Level 最低品质水準RMA Return Material Audit 退料认可QAN Quality Amelionrate Notice 品质改善活动ADM Absolute Dimension Measuremat 全尺寸测量QT Quality Target 品质目标7QCTools 7 Quality Controll Tools 品管七大手法通用之件类ECN Engineering Change Notes 工程变更通知(供应商)ECO Engineering Change Order 工程改动要求(客户)PCN Process Change Notice 工序改动通知PMP Product Management Plan 生產管制计划SIP Specification In Process 制程检验规格SOP Standard Operation Procedure 制造作业规范IS Inspection Specification 成品检验规范BOM Bill Of Material 物料清单PS Package Specification 包装规范SPEC Specification 规格DWG Drawing 图面系统文件类QC Quality System 品质系统ES Engineering Standarization 工程标準CGOO China General PCE龙华厂文件H Huston (美国)休斯敦C Compaq (美国)康伯公司C China 中国大陆A Assembly 组装(厂)S Stamping 冲压(厂)P Painting 烤漆(厂)I Intel 英特尔公司T TAIWAN 臺湾IWS International Workman Standard 工艺标準ISO International Standard Organization 国际标準化组织GS General Specification 一般规格CMCS C-China M-Manufact C-Compaq S-Stamping Compaq產品在龙华冲压厂制造作业规范CQCA Q-Quality A-Assembly Compaq產品在龙华组装厂品管作业规范CQCP P-Painting Compaq產品在龙华烤漆厂品管作业规范部类PMC Production & Material Control 生產和物料控制PPC Production Plan Control 生產计划控制MC Material Control 物料控制ME Manafacture Engineering 制造工程部PE Project Engineering 產品工程部A/C Accountant Dept 会计部P/A Personal & Administration 人事行政部DC Document Center 资料中心QE Quality Engineering 品质工程(部)QA Quality Assurance 品质保证(处)QC Quality Control 品质管制(课)PD Product Department 生產部LAB Labratry 实验室IE Industrial Engineering 工业工程R&D Research & Design 设计开发部P Painting 烤漆(厂)A Asssembly 组装(厂)S Stamping 冲压(厂)生產类PCS Pieces 个(根,块等)PRS Pairs 双(对等)CTN Carton 卡通箱PAL Pallet/skid 栈板PO Purchasing Order 采购订单MO Manufacture Order 生產单D/C Date Code 生產日期码ID/C Identification Code (供应商)识别码SWR Special Work Request 特殊工作需求L/N Lot Number 批号P/N Part Number 料号其它OEM Original Equipment Manufacture 原设备制造PCE Personal Computer Enclosure 个人电脑外设PC Personal Computer 个人电脑CPU Central Processing Unit 中央处理器SECC SECC` 电解片SGCC SGCC 热浸镀锌材料NHK North of Hongkong 中国大陆PRC People's Republic of China 中国大陆U.S.A the United States of America 美国A.S.A.P As Soon As Possible 尽可能快的E-MAIL Electrical-Mail 电子邮件N/A Not Applicable 不适用QTY Quantity 数量VS 以及REV Revision 版本JIT Just In Time 零库存I/O Input/Output 输入/输出OK Ok 好NG Not Good 不行,不合格C=0 Critical=0 极严重不允许ESD Electry-static Discharge 静电排放5S 希腊语整理,整顿,清扫,清洁,教养ATIN Attention 知会CC Carbon Copy 副本復印相关人员APP Approve 核準,认可,承认CHK Check 确认AM Ante Meridian 上午PM Post Meridian 下午CD Compact Disk 光碟CD-ROM Compact Disk Read-Only Memory 只读光碟FDD Floppy Disk Drive 软碟机HDD Hard Disk Drive 碟碟机REF Reference 仅供参考CONN Connector 连接器CAV Cavity 模穴CAD Computer Aid Design 计算机辅助设计ASS'Y Assembly 装配,组装MAT'S Material 材料IC Integrated Circuit 集成电路T/P True Position 真位度TYP Type 类型WDR Weekly Delivery Requitement 周出货需求C?T Cycle Time 制程周期L/T Lead Time 前置时间(生產前準备时间)S/T Standard Time 标準时间P/M Product Market 產品市场3C Computer,Commumcation,Consumer electronic's 消费性电子5WIH When,Where,Who,What,Why,How to5M Man,Machine,Material,Method,Measurement4MIH Man,Materia,Money,Method,Time 人力,物力,财务,技术,时间(资源) SQA Strategy Quality Assurance 策略品质保证DQA Desigh Quality Assurance 设计品质保证MQA Manufacture Quality Assurance 制造品质保证SSQA Sales and service Quality Assurance 销售及服务品质保证LRR Lot Rejeet Rate 批退率BS Brain storming 脑力激荡EMI Electronic Magnetion Inspect 高磁测试FMI Frequency Modulatim Inspect 高频测试B/M Boar/Molding(flat cable)C/P Connector of PCA/P AssemblySPS Switching power supply 电源箱DT Desk Top 卧式(机箱)MT Mini-Tower 立式(机箱)DVD Digital Vedio DiskVCD Vdeio Compact DiskLCD Liquid Crystal DisplayCAD Computer AID DesignCAM Computer AID ManufacturingCAE Computer AID EngineeringABIOS Achanced Basic in put/output system 先进的基本输入/输出系统CMOS Complemeruary Metoll Oxide Semiconductor 互补金属氧化物半导体PDA Personal Digital Assistant 个人数字助理IC Integrated Circuit 集成电路ISA Industry Standard Architecture 工业标準体制结构MCA Micro Channel Architecture 微通道结构EISA Extended Industry Standard Architecture 扩充的工业标準结构SIMM Single in-line memory module 单项导通匯流组件DIMM Dual in-line Memory Module 双项导通匯流组件LED Light-Emitting Diode 发光二级管FMEA Failure Mode Effectivenes 失效模式分析W/H Wire Harness 金属线绪束集组件F/C Flat Calle 排线PCB Printed Circuit Board 印刷电路板CAR Correction Action Report 改善报告NG Not Good 不良WPR Weekly Delivery Requirement 周出货要求PPM Parts Per Million 百万分之一TPM Total Production Maintenance 全面生產保养MRP Material Requiremcnt Planning 物料需计划OC Operation System 作业系统TBA To Be Design 待定,定缺D/C Drawing ChangeP/P Plans & ProceduneEMI Electrical-Music Industry 电子音乐工业RFI Read Frequency Input 读频输入MMC Maximum Material ConditionMMS Maximum Material SizeLMC Least Material ConditionLMS Least Material Size模具技术用语各种模具常用成形方式accurate die casting 精密压铸 powder forming 粉末成形calendaring molding 压延成形 powder metal forging 粉末锻造cold chamber die casting 冷式压铸 precision forging 精密锻造cold forging 冷锻 press forging 冲锻compacting molding 粉末压出成形 rocking die forging 摇动锻造compound molding 復合成形 rotary forging 回转锻造compression molding 压缩成形 rotational molding 离心成形dip mold 浸渍成形 rubber molding 橡胶成形encapsulation molding 注入成形 sand mold casting 砂模铸造extrusion molding 挤出成形 shell casting 壳模铸造foam forming ?泡成形 sinter forging 烧结锻造forging roll 轧锻 six sides forging 六面锻造gravity casting 重力铸造 slush molding 凝塑成形hollow(blow) molding 中空(吹出)成形 squeeze casting 高压铸造hot chamber die casting 热室压铸 swaging 挤锻hot forging 热锻 transfer molding 转送成形injection molding 射出成形 warm forging 温锻investment casting 精密铸造 matched die method 对模成形法laminating method 被覆淋膜成形 low pressure casting 低压铸造lost wax casting 脱蜡铸造 matched mould thermal forming 对模热成形模各式模具分类用语bismuth mold 鉍铸模 landed plunger mold 有肩柱塞式模具burnishing die 挤光模 landed positive mold 有肩全压式模具button die 镶入式圆形凹模 loading shoe mold 料套式模具center-gated mold 中心浇口式模具 loose detail mold 活零件模具chill mold 冷硬用铸模 loose mold 活动式模具clod hobbing 冷挤压制模 louvering die 百叶窗冲切模composite dies 復合模具 manifold die 分歧管模具counter punch 反凸模 modular mold 组合式模具double stack mold 双层模具 multi-cavity mold 多模穴模具electroformed mold 电铸成形模 multi-gate mold 復式浇口模具expander die 扩径模 offswt bending die 双折冷弯模具extrusion die 挤出模 palletizing die 叠层模family mold 反套制品模具 plaster mold 石膏模blank through dies 漏件式落料模 porous mold 通气性模具duplicated cavity plate 復板模 positive mold 全压式模具fantail die 扇尾形模具 pressure die 压紧模fishtail die 鱼尾形模具 profile die 轮廓模flash mold 溢料式模具 progressive die 顺序模gypsum mold 石膏铸模 protable mold 手提式模具hot-runner mold 热流道模具 prototype mold 雏形试验模具ingot mold 钢锭模 punching die 落料模lancing die 切口模 raising(embossing) 压花起伏成形re-entrant mold 倒角式模具 sectional die 拼合模runless injection mold 无流道冷料模具 sectional die 对合模具segment mold 组合模 semi-positive mold 半全压式模具shaper 定型模套 single cavity mold 单腔模具solid forging die 整体锻模 split forging die 拼合锻模split mold 双并式模具 sprueless mold 无注道残料模具squeezing die 挤压模 stretch form die 拉伸成形模sweeping mold 平刮铸模 swing die 振动模具three plates mold 三片式模具 trimming die 切边模unit mold 单元式模具 universal mold 通用模具unscrewing mold 退扣式模具 yoke type die 軛型模模具厂常用之标準零配件air vent vale 通气阀 anchor pin 锚梢angular pin 角梢 baffle 调节阻板angular pin 倾斜梢 baffle plate 折流档板ball button 球塞套 ball plunger 定位球塞ball slider 球塞滑块 binder plate 压板blank holder 防皱压板 blanking die 落料冲头bolster 上下模板 bottom board 浇注底板bolster 垫板 bottom plate 下固定板bracket 托架 bumper block 缓冲块buster 堵口 casting ladle 浇注包casting lug 铸耳 cavity 模穴(模仁)cavity retainer plate 模穴托板 center pin 中心梢clamping block 锁定块 coil spring 螺旋弹簧cold punched nut 冷冲螺母 cooling spiral 螺旋冷却栓core 心型 core pin 心型梢cotter 开口梢 cross 十字接头cushion pin 缓冲梢 diaphragm gate 盘形浇口die approach 模头料道 die bed 型底die block 块形模体 die body 铸模座die bush 合模衬套 die button 冲模母模die clamper 夹模器 die fastener 模具固定用零件die holder 母模固定板 die lip 模唇die plate 冲模板 die set 冲压模座direct gate 直接浇口 dog chuck 爪牙夹头dowel 定位梢 dowel hole 导套孔dowel pin 合模梢 dozzle 辅助浇口dowel pin 定位梢 draft 拔模锥度draw bead 张力调整桿 drive bearing 传动轴承ejection pad 顶出衬垫 ejector 脱模器ejector guide pin 顶出导梢 ejector leader busher 顶出导梢衬套ejector pad 顶出垫 ejector pin 顶出梢ejector plate 顶出板 ejector rod 顶出桿ejector sleeve 顶出衬套 ejector valve 顶出阀eye bolt 环首螺栓 filling core 椿入蕊film gate 薄膜形浇口 finger pin 指形梢finish machined plate 角形模板 finish machined round plate 圆形模板fixed bolster plate 固定侧模板 flanged pin 带凸缘?flash gate 毛边形浇口 flask 上箱floating punch 浮动冲头 gate 浇口gate land 浇口面 gib 凹形拉紧?goose neck 鹅颈管 guide bushing 引导衬套guide pin 导梢 guide post 引导柱guide plate 导板 guide rail 导轨head punch 顶?冲头 headless punch 直柄冲头heavily tapered solid 整体模蕊盒 hose nippler 管接头impact damper 缓冲器 injection ram 压射柱塞inlay busher 嵌入衬套 inner plunger 内柱塞inner punch 内冲头 insert 嵌件insert pin 嵌件梢 king pin 转向梢king pin bush 主梢衬套 knockout bar 脱模杵land 合模平坦面 land area 合模面leader busher 导梢衬套 lifting pin 起模顶?lining 内衬 locating center punch 定位中心冲头locating pilot pin 定位导梢 locating ring 定位环lock block 压块 locking block 定位块locking plate 定位板 loose bush 活动衬套making die 打印冲子 manifold block 歧管档块master plate 靠模样板 match plate 分型板mold base 塑胶模座 mold clamp 铸模紧固夹mold platen 模用板 moving bolster 换模保持装置moving bolster plate 可动侧模板 one piece casting 整体铸件parallel block 平行垫块 paring line 分模线parting lock set 合模定位器 pass guide 穴型导板peened head punch 镶入式冲头 pilot pin 导?pin gate 针尖浇口 plate 衬板pre extrusion punch 顶挤冲头 punch 冲头puncher 推桿 pusher pin 衬套梢rack 机架 rapping rod 起模桿re-entrant mold 凹入模 retainer pin 嵌件梢retainer plate 托料板 return pin 回位梢riding stripper 浮动脱模器 ring gate 环型浇口roller 滚筒 runner 流道runner ejector set 流道顶出器 runner lock pin 流道拉梢screw plug 头塞 set screw 固定螺丝shedder 脱模装置 shim 分隔片shoe 模座之上下模板 shoot 流道shoulder bolt 肩部螺丝 skeleton 骨架slag riser 冒渣口 slide(slide core) 滑块slip joint 滑配接头 spacer block 间隔块spacer ring 间隔环 spider 模蕊支架spindle 主轴 sprue 注道sprue bushing 注道衬套 sprue bushing guide 注道导套sprue lock bushing 注道定位衬套 sprue puller 注道拉料? spue line 合模线 square key 方键square nut 方螺帽 square thread 方螺纹stop collar 限位套 stop pin 止动梢stop ring 止动环 stopper 定位停止梢straight pin 圆柱? stripper bolt 脱料螺栓stripper bushing 脱模衬套 stripper plate 剥料板stroke end block 行程止梢 submarine gate 潜入式浇口support pillar 支撑支柱/顶出支柱 support pin 支撑梢supporting plate 托板 sweep templete 造模刮板tab gate 辅助浇口 taper key 推拔键taper pin 拔锥梢/锥形梢 teeming 浇注three start screw 三条螺纹 thrust pin 推力销tie bar 拉杵 tunnel gate 隧道形浇口vent 通气孔 wortle plate 拉丝模板模具常用之工作机械3D coordinate measurement 三次元量床 boring machine 搪孔机cnc milling machine CNC铣床 contouring machine 轮廓锯床。
紧固件-中英文对照
紧固件-中英文对照No.英文单词简写中文1screw scr 螺丝2nut nut 螺母3washer wash 垫圈4head hd 头5thread thre 螺纹6coati ng coat 镀层7rivet riv 铆钉8sta ndoff stdoff 内外六角钉9driver driv 穴10hexag on hexa 六角11tooth tooth 齿12lock lek 锁13spring spr 弹簧14wave wave 波浪型15pitch pitch 牙距16partial thread PT 半螺纹17PT PT 一种螺纹形式18Full Thread FT 全螺纹19silver silv 银20cone cone 锥形21Eco-syn Eco 30 度牙的一种螺纹22Thread Formi ng TF 自攻螺纹23Self Tapp ing self tapp 自切屑螺纹24pin pin 销25shaft Shaf 轴26steel St 铁27stai nless steel SS 不锈钢28Brass(Cu) Bras(Cu) 铜29Alumi num AL 铝30Rubber Rub 橡胶31mach ine screw mech scr 机制螺丝32SEM screw SEM Scr 组合螺丝33Material material 材料34Grade GD 等级35Fi nish Fi nish 表面处理36Poi nt Poi nt 点37Clamp Clam 夹子38in ternal Int 内39exter nal ext 夕卜40thick ness / 厚度41len gth / 长度42hole / 孑L43Metric Metcric 公制44DIN /德标45ANSI / 美标46JIS /日标螺丝相关参数英语对照A: Mach ine Screw: 机械螺丝B: Tapping Screw:自攻螺丝（分使用于金属与使用于塑料二种）B-1: Sheet Metal Tapping Screw.（铁板牙自攻螺丝）B-2: Plastic Tapping Screw.（塑料用,自攻螺丝）C: Wooden Screw : 木工螺丝D: Drywall Screw : 水泥墙螺丝常见螺丝材质：a.Low Carbo n Steel : 低碳钢b.SS-304 : Stai nl ess Steel 304c.SS-302: Stai nless Steel 302 : 结构韧性较好d.Aluminum 5052 : 铝合金5052d.Brass:黄铜’e.Bron ze: 青铜’f.UNS C11000 Copper: 锑铜Fi nish Code: 外观处理规格Head Code:头部外型螺丝型号Drive Code:头部剖沟,特征型号Length Code:螺丝长度（mm）A-1: Thread Code: 螺丝型号A-2: Length Code: 螺丝长度:A-3: Drive Code/ 头部剖沟,特征.a.Slotted: 一字（Minus ）b.Phillips: 十字（Plus ）c.Phil-Slot: 一字/ 十字d.Hex Scoket: 内六角e.One Way:单向（只可锁入，不可退出）A-4: Head Code/ 头部外型.a.Flat:平头（锁入后,顶部与工作件齐平）b.Oval:色拉头c.Rou nd:圆头d.Pa n:圆扁头e.Truss:大圆扁头f.Hex :六角头A-5: Finish Code/ 外观处理.a.Z:乙n e-Plated: 镀锌b.Ni: Ni-Plated: 镀镍c.Tin-Plated:镀锡d.Zine Plated / Green Iridite: 镀锌绿膜处理.e.Radia nt Plated: 镀五彩f.Passivate: 抗氧化处理.g.Alodial Fi nish: 无外观处理螺纹大径：Major Diam螺纹中径：Pitch diam 螺纹底径：Minor diam 通止规：Go/No go gage 机械性能: mechanical and physicalproperties un ified thread 统一英制螺纹Lustrate hydroge n after galva nizing to avoid hydroge n embrittleme nt 镀后去氢，防止氢脆Case carburizati on 表面渗碳With across flats 对边With across corners 对角Radius of fillet: 头下圆角Tran siti on thread len gth 过度螺纹Wren chi ng height 扳拧高度Rockwell 铬氏硬度Vickers维氏硬度Brin ell布氏硬度Metallography microscope 金相显微镜Salt spray device 盐雾试验箱Ten sile testi ng mach ine 拉力试验机Cold formi ng 冷打Hot forgi ng 红镦P C 8 = property class 8 机械性能8 级原材料：Raw material 球化退火：Annealing 冷拔：Drawing 冷镦：Forming 机加工：Machi ning 螺纹成型：Roll Threadi ng 热处理：heat-treatme nt 表面处理：finish 去氢：Lustrating hydrogen 检验：Inspection 包装：Packing 入库：Stocking 车床：lathe 磨制：grinding红打：hot forging 冲压：pun chi ng Diameter 直径Len gth 长度各类紧固件标准件产品英语翻译对照插片壁虎Steel Ceiling Anchors内迫壁虎Drop in Anchors碳钢锤钉壁虎Steel Hit An chors碳钢六角螺帽Steel Hex Coupli ng Nuts 强力车修壁虎Wedge An chors 外迫壁虎Cut Anchors 化学壁虎Chemical Anchors 不锈钢重载胀栓Heavy Duty Expansion An chors鱼眼壁虎企眼长螺帽Tie Wire Anchors 锌合金打入式壁虎Hammer Drive An chors 弹簧螺帽Strut Nuts 兰花夹系列Toggle Bolts (Spring Toggle & Gravity Toggle)门窗、地板专用壁虎Nylon Frame Anchors or Metalframe An chors石膏板中空壁虎 Hollow Wall A nchors 套管式壁虎Sleeve Anchors 打入式壁虎鱼形尼龙壁虎NylonHarmmer Fixi ng (Nyl on Hammer An chors) 强力式锤钉壁虎 Hit An chors电梯壁虎Bolt Anchors 重载壁虎 Heavy dutyanchors 两片夹 Lox in Masonry An chors 定位螺栓 Set Bolts 长型兰花夹 Short Strap Anchors 工具棒 Drop in Setting Tools 象脚壁虎 Elephant footanchors 水泥预埋件 Concrete Insert 翻边胀轴 Drop in Anchor with Lip 冲件 Legs Drywall Anchors 六角盖头螺帽Hex Cap Nuts 六角锯齿螺帽 Hex Serrated Nuts 六角轮缘螺帽 Hex Fla nge Nuts 高脚螺帽 Hex Coupling Nuts(High Nuts) 圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts 轮壳螺帽Wheel Nuts 蝶型螺帽Wing Nuts U 形螺帽U Nuts T 形螺帽T Nuts 环首螺帽Eye Nuts 齿形螺帽Kep Nuts 齿花螺帽Clinch Nuts 耐候钢六角重型螺帽 Corten Steel Heavy Hex Nuts 焊接螺帽Weld Nuts高张力螺帽 Heigh Strength Nuts 建业用螺帽Structural Nuts 不锈钢螺帽 Sta in less Steel Nuts 铜螺帽Brass Nuts 铝螺帽 Aluminum Nuts 合金钢螺FrameDrive帽Alloy Steel Nuts 重型车螺帽Heavy Duty Wheel Hub Nuts 铁器焊接袋帽Acorn Cap Nuts 金属预置扭矩式螺帽All-Metal Prevaili ng Torque Type Nuts 壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts 盘形华司螺帽Con ical Washer Nuts 铁盖+尼龙圈组合盖帽Din 986 Domed CapNuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts 六角割沟螺帽Hex Slotted Nut 自锁螺帽Self-Locking Nuts 制止螺帽Sliding NutsSin-自动防松螺帽Sln Self-Locking Nuts 其它特殊螺帽Special Nuts 弹簧螺帽Spring Nuts不锈钢突缘螺帽Sta in less Steel Fla nge Nuts 不锈钢六角轮缘尼龙螺帽Stainless Steel Fla nge Nylon In sert Lock Nuts不锈钢六角重型螺帽Stainless Steel HeavyHex Nuts不锈钢六角螺帽Stai nl ess Steel Hex Nuts 不锈钢尼龙嵌入螺帽Stainless Steel NylonIn sert Lock Nuts普通六角螺帽Hex Nuts 六角重型螺帽Heavy Hex Nuts 薄型螺帽Hex Jam Nuts 尼龙嵌入防松螺帽Nyl on In sert Lock Nuts 机械螺丝用六角螺帽Hex Machi ne Screw Nut 六角螺丝(栓)Hex Head Cap Screws(Hex Bolts) 六角机械螺丝Hex Head Mach ine Bolts 六角木牙螺丝Hex Lag Bolts 四角螺丝Square Head BoltsT 头螺丝T Head Bolts 马车螺丝Carriage Bolts 环首螺丝Eye Bolts 内六角孔螺丝Hex Socket Cap Screws 固定螺丝Set Screws 螺椿栓Stud Bolts 螺旋椿Screw Studs 轮壳螺栓Wheel Bolts 翼形螺丝Wing Screws 自攻螺丝Self Tapping Screws 自削螺丝Thread Cutting Screws 钻尾螺丝Self Drilling Screws旋入螺丝Drive Screws机械螺丝Machine Screws木螺丝Wood Screws家具螺丝Furniture Screws塑板螺丝Chipboard Screws墙用螺丝Drywall Screws基础螺栓Foundation BoltsU型螺栓U Bolts勾头螺栓Hook Bolts 套挂螺丝Toggle Bolts 突缘螺丝Flange Bolts 轨道螺栓（鱼尾螺丝）Track Bolts 耐候钢螺丝Corten Steel Heavy Hex Bolts 扭矩控制螺栓T.C.Bolts 高张力螺栓High Strength Bolts 剪力钉（焊接螺丝）Welding Studs 螺丝附华司组合Screws And Washers Assembled（Sems）大尺寸螺栓Big Size Bolts 不锈钢小螺丝Stainless Steel Sheet MetalScrews不锈钢大螺丝Stai nless Steel Bolts铜螺丝Brass Screws 铝螺丝Aluminum Screws 合金钢螺丝Alloy Steel Screws 电子螺丝Electronic Screws 微小精密螺丝Micro Screws 塑料螺丝Plastic Screws 复合材料用螺丝Particle Board Screws 钛合金螺丝Titanium Alloy Bolts 钛、锆、钼、铌等螺丝、零件、材料Ti,Zr,Mo,Nb Pare Metal Bolts Parts 拇指螺丝Thumb Screws 双头牙螺丝Double End Screws Han ger Bolt 车辆（汽车）螺丝、螺帽Automotive Fasteners 航天用螺丝Aerospace Fasteners 飞机特殊扣件Source Co ntrol Bolts 拉栓Blind Bolts 面板螺丝Pan el Faste ners 电梯螺丝Elevator Bolts 四角头固定螺丝Square Set Screws 大头马车螺丝Step Bolts 单向螺丝One Way Lag Screws 管夹螺丝Hose Clamp Screws不锈钢固定螺丝Stainless Steel Hex Socket Cap Screws不锈钢内六角螺丝Sta in less Steel Hex Socket Cap Screws 铰链螺丝Hinge Screws 货柜螺丝Container Screws复合材料钻尾螺丝Bi-Metal Self Drilli ng Screws 三角牙螺丝Trilobular Thread Screws高低牙螺丝High Low Screws夹板用螺丝Particle Board Screws 马桶螺丝Toilet Closet Bolts 特长螺丝Special Lon ger Screws 建业螺丝Building Fasteners 不锈钢六角螺丝Stainless Steel Hex Socket Cap Screws其它特殊螺丝Special Screws Or Bolts 不锈钢特殊螺丝Special Stainless Steel Screws宽牙螺丝（粗牙螺丝）Coarse Thread Screws 链带螺丝Collated Screws 水泥螺丝Concrete Screws板模螺丝Construction Bolts锌蝶螺丝Die Cast Wing Screws;乙nc Alloy 重型车螺丝Heavy Duty Wheel Hub Bolts 内六角固定螺丝Hex Socket Set Screws 复合材料用螺丝(夹板用)Particle Board Screws犁壁螺丝Plow Bolts不锈钢木螺丝Stai nl ess Steel Wood Screws套挂螺栓及螺丝Toggle Bolts钛合金膨胀螺丝Tita nium Alloy Expa nsion Bolts六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Fla nge Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts 环首螺帽Eye Nuts 齿形螺帽Kep Nuts 齿花螺帽Clinch Nuts 耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts 建业用螺帽Structural Nuts 不锈钢螺帽Sta in less Steel Nuts 铜螺帽Brass Nuts 铝螺帽Aluminum Nuts 合金钢螺帽Alloy Steel Nuts 重型车螺帽Heavy Duty Wheel Hub Nuts 铁器焊接袋帽Acorn Cap Nuts 金属预置扭矩式螺帽All-Metal Prevaili ng Torque Type Nuts 壁虎螺帽Anchor Nuts 大尺寸螺帽Big Size Nuts 铁盖袋帽Closed End Acorn Nuts 盘形华司螺帽Con ical Washer Nuts 铁盖+尼龙圈组合盖帽Din 986 Domed CapNuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts 六角割沟螺帽Hex Slotted Nut 自锁螺帽Self-Locking Nuts 制止螺帽Sliding NutsSin-自动防松螺帽Sin Self-Locking Nuts 其它特殊螺帽Special Nuts 弹簧螺帽Spring Nuts不锈钢突缘螺帽Sta in less Steel Fla nge Nuts 不锈钢六角轮缘尼龙螺帽Stainless Steel Fla nge Nylon In sert Lock Nuts不锈钢六角重型螺帽Stainless Steel HeavyHex Nuts不锈钢六角螺帽Stai nl ess Steel Hex Nuts 不锈钢尼龙嵌入螺帽Stainless Steel NylonInsert Lock Nuts锌压属螺帽Zinc Die Casting Nuts 普通六角螺帽Hex Nuts 六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts 尼龙嵌入防松螺帽Nyl on In sert Lock Nuts 机械螺丝用六角螺帽Hex Machi ne Screw Nut合金钢线材盘元Alloy Steel Wire Rod球状化线材Annealing Wire And Rod 黑铁丝Black Wire黄铜棒线Brass Wire And Rod磨光棒钢Bright SteelBar(Hex/Rou nd/Square)铜合金线Copper Alloy Wire线切割线 E.D.M Cutting Wire快削钢线材盘元Free Cutti ng Steel Wire Rod 线材Iron Or Steel Wire线材盘元Iron Or Steel Wire Rod洋白铜线Nickel Silver Wire磷青铜线Phosphate Bronze Wire不锈钢条棒Stai nl ess Steel Bar(Rou nd/Hex/Square)不锈钢冷锻线材Stainless Steel Cold Headi ng Wire不锈钢线(抽线后)Stainless Steel Draw Wire 不锈钢线材Stainless Steel Wire不锈钢线材及盘元Stainless Steel Wire And Rod 棒钢Steel Bar(Hex/Round/Square) 转回90 度碾线头机90 讧evolving Wire Twist ing Machi ne 气动拉钉机Air Riveter 各式螺丝类产品自动包装Automatic Packagi ng For All Kinds Of Packagi ng 自动包装机Automatic Packing Machine 螺丝制造搓牙机械Automatic Thread Rolli ng Machi ne 螺丝割尾加工机械Automatic Thread Slotti ng Machi ne 螺丝制造成型机械AutomaticTrimmi ng Machi ne 拉钉打头机Blind Rivet Heading Machine 螺丝、螺帽成型机Bolt Formers,NutsFormers,Headers 螺丝、螺帽热处理Bolt Nut And Screws Heat Treatme nt 螺丝、螺帽热处理炉BoltNut And ScrewsHeat Treatme nt Fur naces 球状化电器炖炉Carburizing FurnaceVacuum And Bell Type Fur nace超防锈复合瓷膜Ceramic Coati ng连续式光辉渗碳淬火炉Co ntin uous Bright Carburiz ing Quenching Fur nace连续式光辉调质淬火炉Co ntin uous Bright Harde ning Quenching Fur nace中、高热镀锌光辉连续炉Co ntin uous Bright Heat Treat Furn ace连续式光辉热处理炉Con ti nuous TypeBright Heat Treatme nt Fur nace螺丝割尾及特殊割遘加工Machine ScrewShank Slotti ng螺丝钻孔加工Screw Sha nk Drilli ng鸡眼上下模Eyelets Dies一般线材、盘元、退火炉Ge neral Wire,Wire Rod,A nn eali ng Fur nace倒立式滑落型伸线机Handstand Type WireDrawi ng Machi ne十字冲模Header Punches In Various Drives 成型冲模Header Punches In Various Drives 螺丝打头机Heading Machine螺丝制造高速搓牙机械High SpeedAutomatic Thread Rolli ng Machi ne高中低周波感应加热炉High,Medium丄ow Freque ncy In ducti on Heater空心打头机Hollow Heading Machine 热浸镀锌螺丝、螺帽Hot Dip Galvanizing Bolts And Nuts机械镀锌Mechanical Galvanized迷你成型机Mini-Formers成品自动收线机No n-Stop Coiler精抽自动收线机Non-Stop Coiler(Ski n pass) 螺帽模Nut Forming Dies 螺帽成型模Nuts Formers特殊零件成型机Parts Formi ng Machi ng冲模Punch Dies冲子Pu nch Pi ns罗拉成型机Rollers Formers机(踏)车用螺丝成型机Screw For MotorcycleOr Bicycle Headi ng Mach ine止付螺丝成型机Set Screws Formers套高成型机Sockets Formers一般线材、盘元、螺丝合金炖炉SpheroidizingBright Ann eali ng Fur nace 球状化热处理炉Spheroidizing Heat Treatme nt Furn ace 攻牙机Tapping Machine螺丝攻、车刀、模具Taps Dies And Tools 搓牙机铁屑分离装置Thread Chip Separator 滚牙轮Thread Rolli ng Dies 牙板Thread Rolli ng Dies Plates 精密油压滚牙机Hydraulic Thread Rolli ng Machi nes 模具Tools 六角整头模Trimming Dies Hexagan 碳化钨模具Tungsten Carbide Die 镀钛处理（Tin）专业加工服务Tin Hard Coati ng For Cutti ng Tools And Punch By Pvd 电镀化学原料VariousElectroplating Chemicals 环规校正Calibration For Ring Gage 环规、牙规、三线规校正Calibration For Ring Gage, Athread Gage, 3 Wire Gage 螺丝、螺帽品检量测仪器Fasteners In specti on And Measureme nt In strume nts螺丝、螺帽成型攻牙专用油Forming And Tapp ing Oils For Bolts And Nuts Formers 螺丝、螺帽五金等检验In sptection Services For Faste ners And Hardware德国schatz 扭力机代理Representative OfSchatz Torque Mach inIso 品质保证系统Iso Quality Assuranee System生产管理系统Production Con trol System 物料管理系统Material Control System齿轮Gears不锈钢牙条棒Stai nless Steel Hread Rod 马达轴承轴心组件Beari ng Shaft(Motor) 轴承轴心Bearing Shaft 开口铆钉Blind Rivets 长形拉帽Blind Rivet Nuts 拉帽Blind Nuts 拉钉Blind Rivets实心梢Clevis Pins And Straight Pi ns 弹片Clips 卷钉Coil Nails冷锻零件Cold Forming Part开口销Cotter Pi nsE 型环E-Rings膨胀螺栓Expansion Anchor Bolts 鸡眼钉Eyelets RivetsR 型销Sn ap Pi ns闸、锁Latches And Keeper Assembleds 其它特殊铆钉Other Specil Rivets 销Pins格式管夹、管束Pipe Ha nger铆钉Rivets螺旋锔及螺旋圈Screw Hook AndScrew Rin gs中空钉Semi-Tubular Rivet 开叉钉Split Drive Anchors 弹簧华司Spring Washers 弹簧蝴蝶夹Spring Wings 不锈钢华司Stainlesssteel Washers 钢铁钉Steel A nd Iron Nails 搓牙铁钉Thread Nails 钛合金铆钉Titaium Alloy Rivets 管形铆钉Tubular Rivets华司Washers真空热处理Vacuum Heat Treatment 螺丝、螺帽、五金、Diy扣件Fasteners 合金钢工具Alloy Steel Tools 螺栓模Bolt Heading Dies 手动拉钉钳Hand Riveter 船舶链Anchor Chain脚踏车链锁Bicycle Chain Locks螺丝起子Bit罗拉Chain Roller特殊铆合扣件Collars(A Bli ndfaste ner For Huck Intl)装饰链Decorative Chai ns自攻螺纹衬套En sat Threaded In serts 六角扳手Hexagon Keys超音螺纹压入式螺纹自动锁扣ThreadedInserts For Plastic Injection Mouldeings 汽车特殊杆接件Special Auto-Mobile Faste ner As Your Needs 螺纹护套Recoil Inserts链条用滚子Roller For Roller Cha in金属板镶嵌组件及自动夹扣组件Sheet Metal Faste ners工具套筒组件Socket Wrench Sets 不锈钢链Stai nl ess Steel Chai ns 轭子T-Yoke轮胎链Tire Chai ns狗链Dog Cha ins喇叭头轭铁U-Yoke,T-Yoke For Speaker不锈钢输送带轮用轨道Stainless Wheel's Rack For Tran sporter工业用链In dustrial Steel Link Chai ns 拖链安全链Tow Chai ns And Safety Chai ns 机车离合器零件Manufacture Of Motorcycle's Cvt Parts牙条棒Thread Rod机（踏）车用螺丝、轴心Screws And Shafts For Motorcycle Or Bicycle针车用螺丝、轴心Screws And Shafts ForSewing Mach ing止付螺丝Socket Set Screws不锈钢宽牙螺丝Stainless Steel Coarse Thread Screws不锈钢高低牙螺丝Stainless Steel High-Low Thread Screws不锈钢机械螺丝Stainless Steel Machine Screws不锈钢钻尾螺丝Sta in less Steel Self Drilli ng Screws不锈钢自攻螺丝Stai nl ess Steel Self Tappi ng Screws不锈钢自削螺丝Stainless Steel Thread Cutti ng Screws不锈钢三角牙螺丝Stai nl ess Steel Tri-Lobular Thread Screws。
最全紧固件中英文对照资料
最全緊固件中英文對照，外貿必備詞典！一、緊固件 Fasteners標準緊固件 Standard Fasteners非標準緊固件 Nonstandard Fasteners特殊緊固件 Special Fasteners汽車緊固件 Automotive Fasteners銅制緊固件 Brass Fasteners航天用緊固件 Aerospace Fasteners精密緊固件 Precision Fasteners化學緊固件 Chemical Fasteners摩托車緊固件 Motorcycle Fasteners不銹鋼緊固件 Stainless Steel Fasteners鐵道緊固件 Railway Fasteners防松緊固件 Self-locking Fasteners高強度緊固件 High strength FastenersPEM緊固件 PEM Fasteners鋼結構緊固件 Steel Structural Fasteners壓鉚緊固件 Self-Clinching Fasteners鋁制緊固件 Aluminum Fasteners鈦合金緊固件 Titanium Alloy Fasteners尼龍緊固件 Nylon Fasteners精制緊固件 Finished Fastener粗制緊固件 Unfinished Fastener螺紋緊固件 Threaded Fastener半精制緊固件 Semi-Finished Fastener抗剪緊固件 Shear Fastener抗拉緊固件 Tension Fastener面板緊固件 Panel Fasteners二、螺栓 Bolts六角頭螺栓Hexagon Head Bolts六角法蘭面螺栓Hexagon Flange Bolts軌道螺栓（魚尾螺絲）Track Bolts高強度螺栓 High Strength Bolts地腳螺栓Eyelet Bolts馬車螺栓 Carriage Bolts護攔螺栓 Guardrail Bots焊接螺栓 Weld Bolts雙頭螺栓 Double End Bolts鋼結構連接副 Structural Bolting內六角螺栓 Hex Socket Bolts合金鋼螺栓 Alloy Steel Bolts方頭螺栓 Square Head Bolts/Square Bolts鉤頭螺栓 Hook Bolts不銹鋼螺栓 Stainless steel Bolts異型螺栓 Special Bolts吊環螺栓 Lifting Eye Bolts汽車螺栓 Automotive Bolts法蘭螺栓 Flange Bolts輪胎螺栓 Wheel BoltsT型螺栓 T Bolts扁頭螺栓 Pan Head Bolts蝶形螺栓 Wing Bolts沉頭螺栓 Countersunk Bolts沉頭方頸螺栓 Countersunk Square Neck Bolts帶榫螺栓 Cup head Nib Bolts沉頭雙榫螺栓 Flat Countersunk Double Nib Bolts活節螺栓 Eye Bolts壓鉚螺栓 Clinching Bolts紅打螺栓 Hot Forging Bolts圓頭螺栓 Round Head Bolts圓頭方頸螺栓 Round Head Square Neck Bolts圓頭雙榫螺栓 Round Head Fin Neck Bolts米制圓頭方頸螺栓 Metric Round Head Square Neck BoltsT型帶孔螺栓 T bolts withHole六角頭鉸制孔用螺栓 Hexagon Fit Bolts六角頭螺桿帶孔螺栓 Hexagon Bolts with split pin hole on shank鋼網架螺栓球節點用高強度螺栓 High Strength Bolts for joints ofspace grid structures 基礎螺栓 Foundation BoltsU型螺栓 U Bolts高張力螺栓 High Strength Bolts大尺寸螺栓 Big Size Bolts螺椿栓 Stud Bolts拉栓 Blind Bolts重型六角頭螺栓 Heavy Hex Bolts大頭馬車螺栓 Step Bolts扭矩控制螺栓 T.C. Bolts蛋形頸軌道用螺栓 Elliptic Neck Track Bolts調節螺栓，調節螺釘 Pitch-Adjustable Bolts and Screws加長非標雙頭螺栓 Lengthen Non-Standard Stud Bolts電梯膨脹螺栓 Elevator Expansion Bolts三、螺釘 Screws六角螺釘Hex Head Cap Screws/Hex Screws六角機械螺釘 Hex Head Machine Bolts六角法蘭螺釘 Hex Flange Screws內六角孔螺絲 Hex Socket Cap Screws內六角沉頭螺釘 Hex Socket Flat Countersunk Head Cap Screws緊定螺釘/固定螺釘 Set Screws止付螺釘Socket Set Screws方頭緊定螺釘 Square Head Slotted Head Set Screws翼形螺釘/蝶形螺釘 Wing Screws精密螺釘 Precision Screws自攻螺釘 Self-Tapping Screws自削螺釘 Thread Cutting Screws鉆尾螺釘 Self-Drilling Screws旋入螺釘 Drive Screws機械螺釘 Machine Screws木螺釘 Wood Screws家具螺釘 Furniture Screws纖維板釘/塑板螺釘 Chipboard Screws墻用螺釘 Drywall Screws剪力釘(焊接螺釘) Welding Studs螺絲附華司組合 Screws And Washers Assembled (Sems)銅螺釘 Brass Screws鋁螺釘 Aluminum Screws合金鋼螺釘 Alloy Steel Screws組合螺釘 SEM screws電子螺釘 Electronic Screws微小精密螺釘 Micro Screws塑料螺釘 Plastic Screws復合材料用螺釘 Particle Board Screws鈦合金螺釘 Titanium Alloy Bolts鈦、鋯、鉬、鈮等螺絲、零件、材料 Ti ,Zr ,Mo, Nb Pare Metal Bolts Parts 拇指螺絲 Thumb Screws飛機特殊扣件 Source Control Bolts電梯螺釘 Elevator Screws四角頭固定螺釘 Square Set Screws單向螺釘 One Way Lag Screws管夾螺釘 Hose Clamp Screws不銹鋼固定螺釘 Stainless Steel Hex Socket Cap Screws不銹鋼內六角螺釘 Stainless Steel Hex Socket Cap Screws鉸鏈螺釘 Hinge Screws貨柜螺釘 Container Screws復合材料鉆尾螺釘 Bi-Metal Self Drilling Screws三角牙螺釘 Tri-lobular Thread Screws高低牙螺釘 High Low Screws夾板用螺釘 Particle Board Screws馬桶螺釘 Toilet Closet Bolts特長螺釘 Special Longer Screws建業螺釘 Building Fasteners不銹鋼六角螺絲 Stainless Steel Hex Socket Cap Screws不銹鋼特殊螺釘 Special Stainless Steel Screws寬牙螺釘（粗牙螺釘） Coarse Thread Screws鏈帶螺釘 Collated Screws水泥螺釘 Concrete Screws板模螺釘 Construction Bolts鋅蝶螺釘 Die Cast Wing Screws; Zinc Alloy重型車釘 Heavy Duty Wheel Hub Bolts內六角固定螺釘 Hex Socket Set Screws復合材料用螺釘（夾板用） Particle Board Screws犁壁螺釘 Plow Bolts不銹鋼木螺絲 Stainless Steel Wood Screws套掛螺栓及螺釘 Toggle Bolts鈦合金膨脹螺釘 Titanium Alloy Expansion Bolts不銹鋼高低牙螺釘 Stainless Steel High-Low Thread Screws不銹鋼機械螺釘 Stainless Steel Machine Screws不銹鋼鉆尾螺釘 Stainless Steel Self Drilling Screws不銹鋼自攻螺釘 Stainless Steel Self Tapping Screws不銹鋼自削螺釘 Stainless Steel Thread Cutting Screws不銹鋼三角牙螺釘 Stainless Steel Tri-Lobular Thread Screws 不銹鋼寬牙螺釘 Stainless Steel Coarse Thread Screws開槽沉頭螺釘 Slotted Flat Countersunk Head Machine Screws 開槽盤頭螺釘 Slotted Pan Head Machine Screws十字槽盤頭螺釘 Cross Recessed Pan Head Machine Screws 滾花頭臺階螺釘 Knurled Thurmb Screws六角頭木螺釘 Hexagon Head Wood Screws平頭滾花螺釘 Knurled Thin Thumb Screws四、螺母/螺帽 Nuts六角螺母 Hexagon Nuts六角蓋形螺母 Hex Cap Nuts六角鋸齒螺母 Hex Serrated Nuts六角法蘭螺母 Hex Flange Nuts六角平面螺母 Hex Flat Nuts六角厚螺母Hex Thick Nuts重型六角開槽螺母 Heavy Hexagon Slotted Nuts高腳螺母 Hex Coupling Nuts (High Nuts)圓螺母 Round Nuts四角螺母/四方螺母 Square Nuts四方焊接螺母 Square Weld Nuts四爪螺母Four-Claw Nuts管用螺母 Pipe Nuts輪殼螺母 Wheel Nuts蝶型螺母 Wing NutsU形螺母 U NutsT形螺母 T Nuts環首螺母 Eye Nuts齒形螺母 Kep Nuts齒花螺母 Clinch Nuts焊接螺帽 Weld Nuts壓鉚螺母 Self-clinching Nuts高張力螺母 High Strength Nuts建業用螺母 Structural Nuts不銹鋼螺母 Stainless Steel Nuts銅螺母 Brass Nuts鋁螺母 Aluminum Nuts合金鋼螺母 Alloy Steel Nuts重型車螺母 Heavy Duty Wheel Hub Nuts鐵器焊接袋帽 Acorn Cap Nuts金屬預置扭矩式螺母 All-Metal Prevailing Torque Type Nuts壁虎螺母 Anchor Nuts大尺寸螺母 Big Size Nuts鐵蓋袋帽 Closed End Acorn Nuts盤形華司螺母 Conical Washer Nuts鐵蓋+尼龍圈組合蓋帽 Din 986 Domed Cap Nuts法蘭尼龍蓋帽 Flange Nylon Insert Lock Nuts平面華司螺母 Flat Washer Nuts六角割溝螺母 Hex Slotted Nuts自鎖螺母 Self-Locking Nuts制止螺母 Sliding NutsSLN-自動防松螺母 SLN Self-Locking Nuts特殊螺母 Special Nuts彈簧螺母 Spring Nuts不銹鋼法蘭螺母 Stainless Steel Flange Nuts不銹鋼六角輪緣尼龍螺母 Stainless Steel Flange Nylon Insert Lock Nuts 不銹鋼六角重型螺母 Stainless Steel Heavy Hex Nuts不銹鋼六角螺母 Stainless Steel Hex Nuts不銹鋼尼龍嵌入螺母 Stainless Steel Nylon Insert Lock Nuts普通六角螺母 Hex Nuts六角重型螺母 Heavy Hex Nuts薄型螺母 Hex Jam Nuts尼龍嵌入防松螺母 Nylon Insert Lock Nuts尼龍鎖緊螺母Nylon Cage Nuts機械螺絲用六角螺母 Hex Machine Screw Nuts米制六角開槽螺母 Metric Slotted Hex Nuts軌道螺栓用方螺母 Track Bolt Nuts米制六角金屬鎖緊螺母 Prevalling Torque Hexagon Nuts開槽螺母Slotted Round Nuts六角開槽薄螺母Hexagon Slotted Thin Nuts五、螺柱 Studs壓鉚螺柱 Self-Clinching Studs銅螺柱 Brass Studs焊接螺柱 Weld Studs雙頭螺柱 Double End Studs六角螺柱 Hex Studs支撐卡柱 Self-Clinching Standoffs六、墊圈 Washers彈簧墊圈 Spring Washers/Spring Lock Washers寬型彈簧墊圈 Extra-duty Helical Spring Lock Washers杯型墊圈 Cup washers波形墊圈 Wave Washers內齒墊圈 Internal Tooth Washers外齒墊圈 External Tooth Washers銅墊圈 Copper Washers方墊圈 Square Washers密封墊圈 Sealing Washers碟形彈簧墊圈 Disc Spring Washers外舌止動墊圈External Tab Washers高強度墊圈 High strengthen washers橡膠墊圈 Rubber Washers鎖緊墊圈 Lock Washers平墊圈 Plain Washers鞍型彈性墊圈 Curved Spring Washers鋸齒鎖緊彈性墊圈 Toothed lock washers外鋸齒鎖緊墊圈 Serrated Lock Washers錐形墊圈 Taper Washers重型彈簧墊圈 Heavy Spring Lock Washers尼龍墊圈 Nylon Washers淬硬鋼墊圈 Hardened Steel Washers七、鉚釘 Rivets平頭鉚釘 Flat Head Rivets擊芯鉚釘 Drive Rivets彩色鉚釘 Colored Rivets沉頭鉚釘 Countersunk Head Rivets半沉頭鉚釘 Oval Countersunk Head Rivets平錐頭鉚釘 Cone Head Rivets抽芯鉚釘 Blind Rivets開口鉚釘 Split Rivets開口型抽芯鉚釘 Open End Blind Rivets拉鉚釘 Pop Rivets封閉鉚釘Closed End Rivets封閉性抽芯鉚釘 Sealed Type Blind Rivets塑料鉚釘 Plastic Rivets空心鉚釘 Tubular Rivets環槽鉚釘 Ring Groove Rivets單鼓型鉚釘 Single-Grip Rivets圓頭鉚釘 Round Head Rivets高沉頭鉚釘 Countersunk Head Rivets鋁鉚釘 Aluminum Rivets實心鉚釘 Solid Rivets沉頭實心鉚釘 Countersunk Head Solid Rivets燈籠鉚釘 Lantern Blind Rivets半空心鉚釘 Semi-Tubular Rivets圓頭半空心鉚釘 Semi-tubular Pan Head Rivets異型鉚釘 Special Rivets不銹鋼鉚釘 Stainless Steel Rivets雙鼓型鉚釘 Multi-grip Rivets高強度鉚釘 High Strength Rivets臺階鉚釘 Step Rivets面板鉚釘 Tablet Rivets開花型抽芯鉚釘 Flowering Blind Rivets拉花型抽芯鉚釘 Peel Type Blind Rivets溝槽型抽芯鉚釘 Grooved Type Blind Rivet鉚接工具 Riveting Tool八、壁虎（膨脹螺栓）Anchors/Expansion Bolts化學錨栓 Chemical Anchors打入式壁虎 Hammer Drive Anchors內迫壁虎 Drop in Anchors重型壁虎 Heavy Duty Anchors錘釘壁虎 Hit Anchors中空壁虎 Hollow Wall Anchors套管壁虎 Sleeve Anchors插片壁虎 Ceiling Anchors門窗、地板專用壁虎 Nylon Frame Anchors or Metal frame Anchors電梯壁虎 Bolt Anchors車修壁虎 Wedge Anchors魚眼壁虎 Tie Wire Anchors外迫壁虎 Cut Anchors塑料膨脹 Plastic Anchors不銹鋼重載脹栓 Heavy Duty Expansion Anchors象腳壁虎 Elephant Foot Anchors長型蘭花夾 Short Strap Anchors九、銷 Pins開口銷 Split Pins圓錐銷 Taper Pins鎖銷 Lock Pins銷軸 Clevis Pins with head槽銷 Grooved Pins彈性銷 Spring Pins圓柱銷 Parallel Pins彈性圓柱銷 Slotted Spring Pins帶孔銷 Pins with split pin hole十、擋圈 Circlips/Rings開口擋圈 E rings孔用擋圈 Circlips for holes軸用鋼絲擋圈 Roundwire Snap Rings for shaft軸肩擋圈Rings for shoulder夾緊擋圈 Grip Rings軸用卡簧 Circlips for shafts帶齒軸用擋圈 Retaining Rings with Lugs for shafts鋼絲鎖圈 Round wire Circlips錐形鎖緊擋圈 Lock Rings with cone pins十一、其他 Others牙條 Threaded Rod沖壓件 Stampings平鍵 Parallel Keys半圓鍵 Woodruff Keys扳手 Spanners鋼絲螺套 Wire Thread Insert自動車床車削件 CNC Turning Parts齒輪 Gears模具 Molds線材盤元 Iron or steel wire rod鉸鏈 Hinge表面處理 Surface Treatment。
紧固件-中英文对照
No.xx简写中文1 screw scr螺丝2 nut nut螺母3 washer wash垫圈4 head hd头5 thread thre螺纹6 coating coat镀层7 rivet riv铆钉8 standoff stdoff内外六角钉9 driver driv穴10 hexagon hexa六角11 tooth tooth齿12 lock lck锁13 spring spr弹簧14 wave wave波浪型15 pitch pitch牙距16 partial thread PT半螺纹17 PT PT一种螺纹形式18 Full Thread FT全螺纹19 silver silv银20 cone cone锥形21 Eco-syn Eco 30度牙的一种螺纹22 ThreadForming TF自攻螺纹23 Self Tapping self tapp自切屑螺纹24 pin pin销25 shaft Shaf轴26 steel St铁27 stainless steel SS不锈钢28 Brass(Cu) Bras(Cu)铜29 Aluminum AL铝30 Rubber Rub橡胶31 machine screw mech scr机制螺丝32 SEM screw SEM Scr组合螺丝33 Material material材料34 Grade GD等级35 Finish Finish表面处理36 Point Point点37 Clamp Clam夹子38 internal Int内39 external ext外40 thickness /厚度41 length /xx42 hole /xx43 Metric Metcric公制44 DIN /德标45 ANSI /美标46 JIS /日标螺丝相关参数英语对照A: Machine Screw:机械螺丝B: Tapping Screw:自攻螺丝(分使用于金属与使用于塑料二种) B-1: Sheet Metal Tapping Screw. (铁板牙自攻螺丝)B-2: Plastic Tapping Screw. (塑料用,自攻螺丝)C: Wooden Screw :木工螺丝D: Drywall Screw :水泥墙螺丝常见螺丝材质:a.Low Carbon Steel :低碳钢b. SS-304 : Stainless Steel 304c. SS-302: Stainless Steel 302 :结构韧性较好d. Aluminum 5052 :铝合金5052d. Brass:xxe. Bronze:青铜f. UNS C11000 Copper:锑铜Finish Code:外观处理规格Head Code:头部外型螺丝型号Drive Code:头部剖沟,特征型号Length Code:螺丝长度(mm)A-1: Thread Code:螺丝型号A-2: Length Code:螺丝长度:A-3: Drive Code/头部剖沟,特征.a. Slotted:一字( Minus )b. Phillips:十字( Plus )c. Phil-Slot:一字/十字d. Hex Scoket:xxe. One Way:单向(只可锁入,不可退出)A-4: Head Code/头部外型.a. Flat:平头(锁入后,顶部与工作件齐平)b. Oval:色拉头c. Round:圆头d. Pan:圆扁头e. Truss:大圆扁头f. Hex :六角头A-5: Finish Code/外观处理.a. Z: Zine-Plated:镀锌b. Ni: Ni-Plated:镀镍c. Tin-Plated:镀锡d. Zine Plated / Green Iridite:镀锌绿膜处理.e. Radiant Plated:镀五彩f. Passivate:抗氧化处理.g. Alodial Finish:无外观处理螺纹大径：Major Diam螺纹中径：Pitch diam螺纹底径：Minor diam通止规：Go/No go gage机械性能：mechanical and physical propertiesunified thread统一英制螺纹Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement镀后去氢，防止氢脆Case carburization表面渗碳With across flats对边With across corners对角Radius of fillet:头下圆角Transition thread length过度螺纹Wrenching height扳拧高度Rockwell铬氏硬度Vickers维氏硬度Brinellxx氏硬度Metallography microscope金相显微镜Salt spray device盐雾试验箱Tensile testing machine拉力试验机Cold forming冷打Hot forging红镦P C 8 = property class 8机械性能8级原材料：Raw material球化退火：Annealing冷拔：Drawingxx：Forming机加工：Machining螺纹成型：Roll Threading热处理：heat-treatment表面处理：finish去氢：Lustrating hydrogen检验：Inspection包装：Packing入库：Stocking车床：lathe磨制：grinding红打：hot forging冲压：punchingDiameter直径Lengthxx各类紧固件标准件产品xx对照插片壁虎Steel Ceiling Anchors内迫壁虎Drop in Anchors碳钢锤钉壁虎Steel Hit Anchors碳钢六角螺帽Steel Hex Coupling Nuts强力xx壁虎Wedge Anchors外迫壁虎Cut Anchors化学壁虎Chemical Anchors不锈钢重载胀栓Heavy Duty Expansion Anchors鱼眼壁虎企眼长螺帽Tie Wire Anchors锌合金打入式壁虎Hammer Drive Anchors弹簧螺帽Strut Nuts兰花夹系列Toggle Bolts (Spring Toggle & Gravity Toggle)门窗、地板专用壁虎Nylon Frame Anchors or Metalframe Anchors石膏板中空壁虎Hollow Wall Anchors套管式壁虎Sleeve Anchors打入式壁虎鱼形尼龙壁虎Nylon Frame Harmmer Fixing (Nylon Hammer Drive Anchors)强力式锤钉壁虎Hit Anchors电梯壁虎Bolt Anchors重载壁虎Heavy duty anchors两片夹Loxin Masonry Anchors定位螺栓Set Bolts长型兰花夹Short Strap Anchors工具棒Drop in Setting Tools象脚壁虎Elephant foot anchors水泥预埋件Concrete Insert翻边胀轴Drop in Anchor with Lip冲件Legs Drywall Anchors六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts) 圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts 壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut六角螺丝(栓) Hex Head Cap Screws(Hex Bolts)六角机械螺丝Hex Head Machine Bolts六角xx螺丝Hex Lag Bolts四角螺丝Square Head BoltsT头螺丝T Head Bolts环首螺丝Eye Bolts内六角孔螺丝Hex Socket Cap Screws 固定螺丝Set Screws螺椿栓Stud Bolts螺旋椿Screw Studs轮壳螺栓Wheel Bolts翼形螺丝Wing Screws自攻螺丝Self Tapping Screws自削螺丝Thread Cutting Screws钻尾螺丝Self Drilling Screws旋入螺丝Drive Screws机械螺丝Machine Screws木螺丝Wood Screws家具螺丝Furniture Screws塑板螺丝Chipboard Screws墙用螺丝Drywall Screws基础螺栓Foundation BoltsU型螺栓U Bolts勾头螺栓Hook Bolts套挂螺丝Toggle Bolts轨道螺栓(鱼尾螺丝) Track Bolts耐候钢螺丝Corten Steel Heavy Hex Bolts扭矩控制螺栓T.C.Bolts高张力螺栓High Strength Bolts剪力钉(焊接螺丝) Welding Studs螺丝附华司组合Screws And Washers Assembled(Sems)大尺寸螺栓Big Size Bolts不锈钢小螺丝Stainless Steel Sheet Metal Screws不锈钢大螺丝Stainless Steel Bolts铜螺丝Brass Screws铝螺丝Aluminum Screws合金钢螺丝Alloy Steel Screws电子螺丝Electronic Screws微小精密螺丝Micro Screws塑料螺丝Plastic Screws复合材料用螺丝Particle Board Screws钛合金螺丝Titanium Alloy Bolts钛、锆、钼、铌等螺丝、零件、材料Ti,Zr,Mo,Nb Pare Metal Bolts Parts 拇指螺丝Thumb Screws双头牙螺丝Double End Screws Hanger Bolt车辆(汽车)螺丝、螺帽Automotive Fasteners航天用螺丝Aerospace Fasteners飞机特殊扣件Source Control BoltsxxBlind Bolts面板螺丝Panel Fasteners电梯螺丝Elevator Bolts四角头固定螺丝Square Set Screws大头马车螺丝Step Bolts单向螺丝One Way Lag Screws管夹螺丝Hose Clamp Screws不锈钢固定螺丝Stainless Steel Hex Socket Cap Screws 不锈钢内六角螺丝Stainless Steel Hex Socket Cap Screws 铰链螺丝Hinge Screws货柜螺丝Container Screws复合材料钻尾螺丝Bi-Metal Self Drilling Screws三角牙螺丝Trilobular Thread Screws高低牙螺丝High Low Screws夹板用螺丝Particle Board Screws马桶螺丝Toilet Closet Bolts特长螺丝Special Longer Screws建业螺丝Building Fasteners不锈钢六角螺丝Stainless Steel Hex Socket Cap Screws 其它特殊螺丝Special Screws Or Bolts不锈钢特殊螺丝Special Stainless Steel Screws宽牙螺丝（粗牙螺丝）Coarse Thread Screws链带螺丝Collated Screws水泥螺丝Concrete Screws板模螺丝Construction Bolts锌蝶螺丝Die Cast Wing Screws; Zinc Alloy重型车螺丝Heavy Duty Wheel Hub Bolts内六角固定螺丝Hex Socket Set Screws复合材料用螺丝（夹板用）Particle Board Screws犁壁螺丝Plow Bolts不锈钢木螺丝Stainless Steel Wood Screws套挂螺栓及螺丝Toggle Bolts钛合金膨胀螺丝Titanium Alloy Expansion Bolts六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts 壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts锌压属螺帽Zinc Die Casting Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut合金钢线材盘元Alloy Steel Wire Rod球状化线材Annealing Wire And Rod黑铁丝Black Wire黄铜棒线Brass Wire And Rod磨光棒钢Bright Steel Bar(Hex/Round/Square)铜合金线Copper Alloy Wire线切割线E.D.M Cutting Wire快削钢线材盘元Free Cutting Steel Wire Rod线材Iron Or Steel Wire线材盘元Iron Or Steel Wire Rod洋白铜线Nickel Silver Wire磷青铜线Phosphate Bronze Wire不锈钢条棒Stainless Steel Bar(Round/Hex/Square)不锈钢冷锻线材Stainless Steel Cold Heading Wire不锈钢线(抽线后) Stainless Steel Draw Wire不锈钢线材Stainless Steel Wire不锈钢线材及盘元Stainless Steel Wire And Rod棒钢Steel Bar(Hex/Round/Square)转回90度碾线头机90讧evolving Wire Twisting Machine 气动拉钉机Air Riveter各式螺丝类产品自动包装Automatic Packaging For All Kinds Of Packaging 自动包装机Automatic Packing Machine螺丝制造搓牙机械Automatic Thread Rolling Machine螺丝割尾加工机械Automatic Thread Slotting Machine螺丝制造成型机械Automatic Trimming Machine拉钉打头机Blind Rivet Heading Machine螺丝、螺帽成型机Bolt Formers,Nuts Formers,Headers螺丝、螺帽热处理Bolt Nut And Screws Heat Treatment螺丝、螺帽热处理炉Bolt Nut And Screws Heat Treatment Furnaces球状化电器炖炉Carburizing Furnace Vacuum And Bell Type Furnace超防锈复合瓷膜Ceramic Coating连续式光辉渗碳淬火炉Continuous Bright Carburizing Quenching Furnace 连续式光辉调质淬火炉Continuous Bright Hardening Quenching Furnace 中、高热镀锌光辉连续炉Continuous Bright Heat Treat Furnace连续式光辉热处理炉Continuous Type Bright Heat Treatment Furnace螺丝割尾及特殊割遘加工Machine Screw Shank Slotting螺丝钻孔加工Screw Shank Drilling鸡眼上下模Eyelets Dies一般线材、盘元、退火炉General Wire,Wire Rod,Annealing Furnace倒立式滑落型伸线机Handstand Type Wire Drawing Machine十字冲模Header Punches In Various Drives成型冲模Header Punches In Various Drives螺丝打头机Heading Machine螺丝制造高速搓牙机械High Speed Automatic Thread Rolling Machine高中低周波感应加热炉High,Medium,Low Frequency Induction Heater 空心打头机Hollow Heading Machine热浸镀锌螺丝、螺帽Hot Dip Galvanizing Bolts And Nuts机械镀锌Mechanical Galvanized迷你成型机Mini-Formers成品自动收线机Non-Stop Coiler精抽自动收线机Non-Stop Coiler(Skinpass)螺帽模Nut Forming Dies螺帽成型模Nuts Formers特殊零件成型机Parts Forming Maching冲模Punch Dies冲子Punch Pins罗拉成型机Rollers Formers机(踏)车用螺丝成型机Screw For Motorcycle Or Bicycle Heading Machine 止付螺丝成型机Set Screws Formers套高成型机Sockets Formers一般线材、盘元、螺丝合金炖炉Spheroidizing Bright Annealing Furnace 球状化热处理炉Spheroidizing Heat Treatment Furnace攻牙机Tapping Machine螺丝攻、车刀、模具Taps Dies And Tools搓牙机铁屑分离装置Thread Chip Separator滚牙轮Thread Rolling Dies牙板Thread Rolling Dies Plates精密油压滚牙机Hydraulic Thread Rolling Machines模具Tools六角整头模Trimming Dies Hexagan碳化钨模具Tungsten Carbide Die镀钛处理(Tin)专业加工服务Tin Hard Coating For Cutting Tools And Punch By Pvd电镀化学原料Various Electroplating Chemicals环规校正Calibration For Ring Gage环规、牙规、三线规校正Calibration For Ring Gage, Athread Gage, 3 Wire Gage螺丝、螺帽品检量测仪器Fasteners Inspection And Measurement Instruments螺丝、螺帽成型攻牙专用油Forming And Tapping Oils For Bolts And Nuts Formers螺丝、螺帽五金等检验Insptection Services For Fasteners And Hardware德国schatz扭力机代理Representative Of Schatz Torque MachinIso品质保证系统Iso Quality Assurance System生产管理系统Production Control System物料管理系统Material Control System齿轮Gears不锈钢牙条棒Stainless Steel Hread Rod 马达轴承轴心组件Bearing Shaft(Motor) 轴承轴心Bearing Shaft开口铆钉Blind Rivets长形拉帽Blind Rivet Nuts拉帽Blind NutsxxBlind Rivets实心梢Clevis Pins And Straight Pins弹片Clips卷钉Coil Nails冷锻零件Cold Forming Part开口销Cotter PinsE型环E-Rings膨胀螺栓Expansion Anchor Bolts鸡眼钉Eyelets RivetsR型销Snap Pins闸、锁Latches And Keeper Assembleds 其它特殊铆钉Other Specil Rivets销Pins格式管夹、管束Pipe Hanger铆钉Rivets螺旋锔及螺旋圈Screw Hook And Screw Rings中空钉Semi-Tubular Rivet开叉钉Split Drive Anchors弹簧华司Spring Washers弹簧蝴蝶夹Spring Wings不锈钢华司Stainlesssteel Washers钢铁钉Steel And Iron Nails搓牙铁钉Thread Nails钛合金铆钉Titaium Alloy Rivets管形铆钉Tubular Rivets华司Washers真空热处理Vacuum Heat Treatment螺丝、螺帽、五金、Diy扣件Fasteners合金钢工具Alloy Steel Tools螺栓模Bolt Heading Dies手动xx钳Hand Riveter船舶链Anchor Chain脚踏车链锁Bicycle Chain Locks螺丝起子Bit罗拉Chain Roller特殊铆合扣件Collars(A Blindfastener For Huck Intl)装饰链Decorative Chains自攻螺纹衬套Ensat Threaded Inserts六角扳手Hexagon Keys超音螺纹压入式螺纹自动锁扣Threaded Inserts For Plastic Injection Mouldeings汽车特殊杆接件Special Auto-Mobile Fastener As Your Needs螺纹护套Recoil Inserts链条用滚子Roller For Roller Chain金属板镶嵌组件及自动夹扣组件Sheet Metal Fasteners工具套筒组件Socket Wrench Sets不锈钢链Stainless Steel Chains轭子T-Yoke轮胎链Tire Chains狗链Dog Chains喇叭头轭铁U-Yoke,T-Yoke For Speaker不锈钢输送带轮用轨道Stainless Wheel's Rack For Transporter工业用链Industrial Steel Link Chains拖链安全链Tow Chains And Safety Chains机车离合器零件Manufacture Of Motorcycle's Cvt Parts牙条棒Thread Rod机(踏)车用螺丝、轴心Screws And Shafts For Motorcycle Or Bicycle 针车用螺丝、轴心Screws And Shafts For Sewing Maching止付螺丝Socket Set Screws不锈钢宽牙螺丝Stainless Steel Coarse Thread Screws不锈钢高低牙螺丝Stainless Steel High-Low Thread Screws 不锈钢机械螺丝Stainless Steel Machine Screws不锈钢钻尾螺丝Stainless Steel Self Drilling Screws不锈钢自攻螺丝Stainless Steel Self Tapping Screws不锈钢自削螺丝Stainless Steel Thread Cutting Screws不锈钢三角牙螺丝Stainless Steel Tri-Lobular Thread Screws。
常用紧固件行业相关术语(中英对照)简体
常用紧固件行业相关术语(中英对照)简体.txt丶︶￣喜欢的歌，静静的听，喜欢的人，远远的看我笑了当初你不挺傲的吗现在您这是又玩哪出呢？组装、冲压、喷漆等专业词匯Assembly line组装线Layout布置图Conveyer流水线物料板Rivet table拉钉机Rivet gun拉钉枪Screw driver起子Electric screw driver电动起子Pneumatic screw driver气动起子worktable 工作桌OOBA开箱检查fit together组装在一起fasten锁紧(螺丝)fixture 夹具(治具)pallet栈板barcode条码barcode scanner条码扫描器fuse together熔合fuse machine热熔机repair修理operator作业员QC品管supervisor 课长ME制造工程师MT制造生技cosmetic inspect外观检查inner parts inspect内部检查thumb screw大头螺丝lbs. inch镑、英寸EMI gasket导电条front plate前板rear plate后板chassis 基座bezel panel面板power button电源按键reset button重置键Hi-pot test of SPS高源高压测试Voltage switch of SPS电源电压接拉键sheet metal parts 冲件plastic parts塑胶件SOP制造作业程序material check list物料检查表work cell工作间trolley臺车carton纸箱sub-line支线left fork叉车personnel resource department人力资源部production department生產部门planning department企划部QC Section品管科stamping factory冲压厂painting factory烤漆厂molding factory成型厂common equipment常用设备uncoiler and straightener整平机punching machine 冲床robot机械手hydraulic machine油压机lathe车床planer |'plein?|刨床miller铣床grinder磨床driller??床linear cutting线切割electrical sparkle电火花welder电焊机staker=reviting machine铆合机position职务president董事长general manager总经理special assistant manager特助factory director厂长department director部长deputy manager | =vice manager副理section supervisor课长deputy section supervisor =vice section superisor副课长group leader/supervisor组长line supervisor线长assistant manager助理to move, to carry, to handle搬运be put in storage入库pack packing包装to apply oil擦油to file burr 銼毛刺final inspection终检to connect material接料to reverse material 翻料wet station沾湿臺Tiana天那水cleaning cloth抹布to load material上料to unload material卸料to return material/stock to退料scraped |'skr?pid|报废scrape ..v.刮;削deficient purchase来料不良manufacture procedure制程deficient manufacturing procedure制程不良oxidation |' ksi'dei?n|氧化scratch刮伤dents压痕defective upsiding down抽芽不良defective to staking铆合不良embedded lump镶块feeding is not in place送料不到位stamping-missing漏冲production capacity生產力education and training教育与训练proposal improvement提案改善spare parts=buffer备件forklift叉车trailer=long vehicle拖板车compound die合模die locker锁模器pressure plate=plate pinch压板bolt螺栓name of a department部门名称administration/general affairs dept总务部automatic screwdriver电动啟子thickness gauge厚薄规gauge(or jig)治具power wire电源线buzzle蜂鸣器defective product label不良标签identifying sheet list标示单screwdriver holder起子插座pedal踩踏板stopper阻挡器flow board流水板hydraulic handjack油压板车forklift叉车pallet栈板glove(s)手套glove(s) with exposed fingers割手套thumb大拇指forefinger食指midfinger中指ring finger无名指little finger小指band-aid创可贴iudustrial alcohol工业酒精alcohol container沾湿臺head of screwdriver起子头sweeper扫把mop拖把vaccum cleaner吸尘器rag 抹布garbage container灰箕garbage can垃圾箱garbage bag垃圾袋chain链条jack升降机production line流水线chain链条槽magnetizer加磁器lamp holder灯架to mop the floor拖地to clean the floor扫地to clean a table擦桌子air pipe 气管packaging tool打包机packaging打包missing part漏件wrong part错件excessive defects过多的缺陷critical defect极严重缺陷major defect主要缺陷minor defect次要缺陷not up to standard不合规格dimension/size is a little bigger尺寸偏大(小) cosmetic defect外观不良slipped screwhead/slippery screw head螺丝滑头slipped screwhead/shippery screw thread滑手speckle斑点mildewed=moldy=mouldy发霉rust生銹deformation变形burr(金属)flash(塑件)毛边poor staking铆合不良excesssive gap间隙过大grease/oil stains油污inclusion杂质painting peel off臟污shrinking/shrinkage缩水mixed color杂色scratch划伤poor processing 制程不良poor incoming part事件不良fold of pakaging belt打包带折皱painting make-up补漆discoloration羿色water spots水渍polishing/surface processing表面处理exposed metal/bare metal金属裸露lack of painting烤漆不到位safety安全quality品质delivery deadline交货期cost成本engineering工程die repair模修enterprise plan = enterprise expansion projects企划QC品管die worker模工production, to produce生產equipment设备to start a press开机stop/switch off a press关机classification整理regulation整顿cleanness清扫conservation清洁culture教养qualified products, up-to-grade products良品defective products, not up-to-grade products不良品waste废料board看板feeder送料机sliding rack滑料架defective product box不良品箱die change 换模to fix a die装模to take apart a die拆模to repair a die修模packing material包材basket蝴蝶竺plastic basket胶筐isolating plate baffle plate; barricade隔板carton box纸箱to pull and stretch拉深to put material in place, to cut material, to input落料to impose lines压线to compress, compressing压缩character die字模to feed, feeding送料transportation运输(be)qualfied, up to grade合格not up to grade, not qualified不合格material change, stock change材料变更feature change 特性变更evaluation评估prepare for, make preparations for 準备parameters参数rotating speed, revolution转速manufacture management制造管理abnormal handling异常处理production unit生產单位lots of production生產批量steel plate钢板roll material卷料manufacture procedure制程operation procedure作业流程to revise, modify修订to switch over to, switch---to throw--over switching over切换engineering, project difficulty工程瓶颈stage die工程模automation自动化to stake, staking, reviting铆合add lubricating oil加润滑油shut die架模shut height of a die架模高度analog-mode device类模器die lifter举模器argon welding氬焊vocabulary for stamping冲压常词匯stamping, press冲压punch press, dieing out press冲床uncoiler & strainghtener整平机feeder送料机rack, shelf, stack料架cylinder油缸robot机械手taker取料机conveyer belt输送带transmission rack输送架top stop上死点bottom stop下死点one stroke一行程inch寸动to continue, cont.连动to grip(material)吸料location lump, locating piece, block stop 定位块reset復位smoothly顺利dent压痕scratch刮伤deformation变形filings铁削to draw holes抽孔inquiry, search for查寻to stock, storage, in stock库存receive领取approval examine and verify审核processing, to process加工delivery, to deliver 交货to return delivenry to.to send delinery backto retrn of goods退货registration登记registration card登记卡to control管制to put forward and hand in提报safe stock安全库存acceptance = receive验收to notice通知application form for purchase请购单consume, consumption消耗to fill in填写abrasion磨损reverse angle = chamfer倒角character die字模to collect, to gather收集failure, trouble故障statistics统计demand and supply需求career card履歷卡to take apart a die卸下模具to load a die装上模具to tight a bolt拧紧螺栓to looser a bolt拧松螺栓to move away a die plate移走模板easily damaged parts易损件standard parts标準件breaking.(be)broken,(be)cracked 断裂to lubricate润滑common vocabulary for die engineering 模具工程常用词匯die 模具figure file, chart file图档cutting die, blanking die冲裁模progressive die, follow (-on)die连续模compound die復合模punched hole冲孔panel board镶块to cutedges=side cut=side scrap切边to bending折弯to pull, to stretch拉伸Line streching, line pulling线拉伸engraving, to engrave刻印upsiding down edges翻边to stake铆合designing, to design设计design modification设计变化die block模块folded block折弯块sliding block滑块location pin定位销lifting pin顶料销die plate, front board模板padding block垫块stepping bar垫条upper die base上模座lower die base下模座upper supporting blank上承板upper padding plate blank上垫板spare dies模具备品spring 弹簧bolt螺栓document folder文件夹file folder资料夹to put file in order整理资料spare tools location手工备品仓first count初盘人first check初盘復棹人second count 復盘人second check復盘復核人equipment设备waste materials废料work in progress product在制品casing = containerazation装箱quantity of physical invetory second count 復盘点数量quantity of customs count会计师盘,点数量the first page第一联filed by accounting department for reference会计部存查end-user/using unit(department)使用单位summary of year-end physical inventory bills年终盘点截止单据匯总表bill name单据名称This sheet and physical inventory list will be sent to accounting department together (Those of NHK will be sent to financial department)本表请与盘点清册一起送会计部－(NHK厂区送财会部)Application status records of year-end physical inventory List and physical inventory card 年终盘点卡与清册使用－状况明细表blank and waste sheet NO.空白与作废单号plate电镀mold成型material for engineering mold testing工程试模材料not included in physical inventory不列入盘点sample样品incoming material to be inspected进货待验description品名steel/rolled steel钢材material statistics sheet物料统计明细表meeting minutes会议记录meeting type 会别distribution department分发单位location地点chairman主席present members出席人员subject主题conclusion结论decision items决议事项responsible department负责单位pre-fixed finishing date预定完成日approved by / checked by / prepared by核準/审核/承办PCE assembly production schedule sheetPCE组装厂生產排配表model机钟work order工令revision版次remark备注production control confirmation生產确认checked by初审approved by核準department部门stock age analysis sheet库存货龄分析表on-hand inventory现有库存available material良品可使用obsolete material良品已呆滞to be inspected or reworked待验或重工total合计cause description原因说明part number/ P/N 料号type形态item/group/class类别quality品质prepared by制表notes说明year-end physical inventory difference analysis sheet年终盘点差异分析表physical inventory盘点数量physical count quantity帐面数量difference quantity差异量cause analysis原因分析raw materials原料materials物料finished product成品semi-finished product半成品packing materials包材good product/accepted goods/ accepted parts/good parts良品defective product/non-good parts不良品disposed goods处理品warehouse/hub仓库on way location在途仓oversea location海外仓spare parts physical inventory list备品盘点清单spare molds location模具备品仓skid/pallet栈板tox machine自铆机wire EDM线割EDM放电机coil stock卷料sheet stock片料tolerance工差score=groove压线cam block滑块pilot导正筒trim剪外边pierce剪内边drag form压锻差pocket for the punch head掛鉤槽slug hole废料孔feature die公母模expansion dwg展开图radius半径shim(wedge)楔子torch-flame cut火焰切割set screw止付螺丝form block折刀stop pin定位销round pierce punch=die button圆冲子shape punch=die insert异形子stock locater block定位块under cut=scrap chopper清角active plate活动板baffle plate挡块cover plate盖板male die公模female die母模groove punch压线冲子air-cushion eject-rod气垫顶桿spring-box eject-plate弹簧箱顶板bushing block衬套insert 入块club car高尔夫球车capability能力parameter参数factor系数phosphate皮膜化成viscosity涂料粘度alkalidipping脱脂main manifold主集流脉bezel斜视规blanking穿落模dejecting顶固模demagnetization去磁;消磁high-speed transmission高速传递heat dissipation热传rack上料degrease脱脂rinse水洗alkaline etch龄咬desmut剥黑膜D.I. rinse纯水次Chromate铬酸处理Anodize阳性处理seal封孔revision版次part number/P/N料号good products良品scraped products报放心品defective products不良品finished products成品disposed products处理品barcode条码flow chart流程表单assembly组装stamping冲压molding成型spare parts=buffer备品coordinate座标dismantle the die折模auxiliary fuction辅助功能poly-line多义线heater band 加热片thermocouple热电偶sand blasting喷沙grit 砂砾derusting machine除銹机degate打浇口dryer烘干机induction感应induction light感应光response=reaction=interaction感应ram连桿edge finder巡边器concave凸convex凹short射料不足nick缺口speck瑕??shine亮班splay 银纹gas mark焦痕delamination起鳞cold slug冷块blush 导色gouge沟槽;凿槽satin texture段面咬花witness line证示线patent专利grit沙砾granule=peuet=grain细粒grit maker抽粒机cushion缓冲magnalium镁铝合金magnesium镁金metal plate鈑金lathe车mill銼plane刨grind磨drill铝boring鏜blinster气泡fillet镶;嵌边through-hole form通孔形式voller pin formality滚针形式cam driver铡楔shank摸柄crank shaft曲柄轴augular offset角度偏差velocity速度production tempo生產进度现状torque扭矩spline=the multiple keys花键quenching淬火tempering回火annealing退火carbonization碳化alloy合金tungsten high speed steel钨高速的moly high speed steel鉬高速的organic solvent有机溶剂bracket小磁导liaison联络单volatile挥发性resistance电阻ion离子titrator滴定仪beacon警示灯coolant冷却液crusher破碎机模具工程类plain die简易模pierce die冲孔模forming die成型模progressive die连续模gang dies復合模shearing die剪边模riveting die铆合模pierce冲孔forming成型(抽凸,冲凸)draw hole抽孔bending折弯trim切边emboss凸点dome凸圆semi-shearing半剪stamp mark冲记号deburr or coin压毛边punch riveting冲压铆合side stretch侧冲压平reel stretch卷圆压平groove压线blanking下料stamp letter冲字(料号) shearing剪断tick-mark nearside正面压印tick-mark farside反面压印冲压名称类extension dwg展开图procedure dwg工程图die structure dwg模具结构图material材质material thickness料片厚度factor系数upward向上downward向下press specification冲床规格die height range适用模高die height闭模高度burr毛边gap间隙weight重量total wt.总重量punch wt.上模重量五金零件类inner guiding post内导柱inner hexagon screw内六角螺钉dowel pin固定销coil spring弹簧lifter pin顶料销eq-height sleeves=spool等高套筒pin销lifter guide pin浮升导料销guide pin导正销wire spring圆线弹簧outer guiding post外导柱stop screw止付螺丝located pin定位销outer bush外导套模板类top plate上托板（顶板）top block上垫脚punch set上模座punch pad上垫板punch holder上夹板stripper pad脱料背板up stripper上脱料板male die公模(凸模)feature die公母模female die母模(凹模)upper plate上模板lower plate下模板die pad下垫板die holder下夹板die set下模座bottom block下垫脚bottom plate下托板(底板) stripping plate内外打(脱料板) outer stripper外脱料板inner stripper内脱料板lower stripper下脱料板零件类punch冲头insert入块(嵌入件)deburring punch压毛边冲子groove punch压线冲子stamped punch字模冲子round punch圆冲子special shape punch异形冲子bending block折刀roller滚轴baffle plate挡块located block定位块supporting block for location 定位支承块air cushion plate气垫板air-cushion eject-rod气垫顶桿trimming punch切边冲子stiffening rib punch = stinger 加强筋冲子ribbon punch压筋冲子reel-stretch punch卷圆压平冲子guide plate定位板sliding block滑块sliding dowel block滑块固定块active plate活动板lower sliding plate下滑块板upper holder block上压块upper mid plate上中间板spring box弹簧箱spring-box eject-rod弹簧箱顶桿spring-box eject-plate弹簧箱顶板bushing bolck衬套cover plate盖板guide pad导料块塑件&模具相关英文compre sion molding压缩成型flash mold溢流式模具plsitive mold挤压式模具split mold分割式模具cavity型控母模core模心公模taper锥拔leather cloak仿皮革shiver饰纹flow mark流痕welding mark溶合痕post screw insert螺纹套筒埋值self tapping screw自攻螺丝striper plate脱料板piston活塞cylinder汽缸套chip细碎物handle mold手持式模具移转成型用模具encapsulation molding低压封装成型射出成型用模具two plate两极式（模具）well type蓄料井insulated runner绝缘浇道方式hot runner热浇道runner plat浇道模块valve gate阀门浇口band heater环带状的电热器spindle阀针spear head刨尖头slag well冷料井cold slag冷料渣air vent排气道h=0.02~0.05mmw=3.2mmL=3~5mmwelding line熔合痕eject pin顶出针knock pin顶出销return pin回位销反顶针sleave套筒stripper plate脱料板insert core放置入子runner stripper plate浇道脱料板guide pin导销eject rod (bar)（成型机）顶业捧subzero深冷处理three plate三极式模具runner system浇道系统stress crack应力电裂orientation定向sprue gate射料浇口，直浇口nozzle射嘴sprue lock pin料头鉤销(拉料桿) slag well冷料井side gate侧浇口edge gate侧缘浇口tab gate搭接浇口film gate薄膜浇口flash gate闸门浇口slit gate缝隙浇口fan gate扇形浇口dish gate因盘形浇口H=F=1/2t~1/5tT=2.5~3.5mmdiaphragm gate隔膜浇口ring gate环形浇口subarine gate潜入式浇口tunnel gate隧道式浇口pin gate针点浇口Φ0.8~1.0mmRunner less无浇道(sprue less)无射料管方式long nozzle延长喷嘴方式sprue浇口;溶渣品质人员名称类QC quality control 品质管理人员FQC final quality control 终点品质管制人员IPQC in process quality control 制程中的品质管制人员OQC output quality control 最终出货品质管制人员IQC incoming quality control 进料品质管制人员TQC total quality control 全面质量管理POC passage quality control 段检人员QA quality assurance 质量保证人员OQA output quality assurance 出货质量保证人员QE quality engineering 品质工程人员品质保证类FAI first article inspection 新品首件检查FAA first article assurance 首件确认TVR tool verification report 模具确认报告3B 3B 模具正式投產前确认CP capability index 能力指数CPK capability index of process 模具制程能力参数SSQA standardized supplier quality 合格供应商品质评估OOBA out of box audit 开箱检查QFD quality function deployment 品质机能展开FMEA failure model effectiveness analysis 失效模式分析8 disciplines 8项回復内容FA final audit 最后一次稽核CAR corrective action request 改正行动要求corrective action report 改正行动报告FQC运作类AQL Acceptable Quality Level 运作类允收品质水準S/S Sample size 抽样检验样本大小ACC Accept 允收REE Reject 拒收CR Critical 极严重的MAJ Major 主要的MIN Minor 轻微的AOQ Average Output Quality 平均出厂品质AOQL Average Output Quality Level 平均出厂品质Q/R/S Quality/Reliability/Service 品质/可靠度服务MIL-STD Military-Standard 军用标準S I-S IV Special I-Special IV 特殊抽样水準等级P/N Part Number 料号L/N Lot Number 特采AOD Accept On Deviation 特采UAI Use As It 首件检查报告FPIR First Piece Inspection Report 百万分之一PPM Percent Per Million 批号制程统计品管专类SPC Statistical Process Control 统计制程管制SQC Statistical Quality Control 统计品质管制R Range 全距AR Averary Range 全距平均值UCL Upper Central Limit 管制上限LCL Lower Central Limit 管制下限MAX Maximum 最大值MIN Minimum 最小值GRR Gauge Reproducibility&Repeatability 量具之再制性及重测性判断量可靠与否DIM Dimension 尺寸DIA Diameter 直径FREQ Frequency 频率N Number 样品数其它品质术语类QCC Quality Control Circle 品质圈QIT Quality Improvement Team 品质改善小组PDCA Plan Do Check Action 计划执行检查总结ZD Zero Defect 零缺点QI Quality Improvement 品质改善QP Quality Policy 目标方针TQM Total Quality Management 全面品质管理MRB Material Reject Bill 退货单LQL Limiting Quality Level 最低品质水準RMA Return Material Audit 退料认可QAN Quality Amelionrate Notice 品质改善活动ADM Absolute Dimension Measuremat 全尺寸测量QT Quality Target 品质目标7QCTools 7 Quality Controll Tools 品管七大手法通用之件类ECN Engineering Change Notes 工程变更通知(供应商)ECO Engineering Change Order 工程改动要求(客户)PCN Process Change Notice 工序改动通知PMP Product Management Plan 生產管制计划SIP Specification In Process 制程检验规格SOP Standard Operation Procedure 制造作业规范IS Inspection Specification 成品检验规范BOM Bill Of Material 物料清单PS Package Specification 包装规范SPEC Specification 规格DWG Drawing 图面系统文件类QC Quality System 品质系统ES Engineering Standarization 工程标準CGOO China General PCE龙华厂文件H Huston (美国)休斯敦C Compaq (美国)康伯公司C China 中国大陆A Assembly 组装(厂)S Stamping 冲压(厂)P Painting 烤漆(厂)I Intel 英特尔公司T TAIWAN 臺湾IWS International Workman Standard 工艺标準ISO International Standard Organization 国际标準化组织GS General Specification 一般规格CMCS C-China M-Manufact C-Compaq S-Stamping Compaq產品在龙华冲压厂制造作业规范CQCA Q-Quality A-Assembly Compaq產品在龙华组装厂品管作业规范CQCP P-Painting Compaq產品在龙华烤漆厂品管作业规范部类PMC Production & Material Control 生產和物料控制PPC Production Plan Control 生產计划控制MC Material Control 物料控制ME Manafacture Engineering 制造工程部PE Project Engineering 產品工程部A/C Accountant Dept 会计部P/A Personal & Administration 人事行政部DC Document Center 资料中心QE Quality Engineering 品质工程(部)QA Quality Assurance 品质保证(处)QC Quality Control 品质管制(课)PD Product Department 生產部LAB Labratry 实验室IE Industrial Engineering 工业工程R&D Research & Design 设计开发部P Painting 烤漆(厂)A Asssembly 组装(厂)S Stamping 冲压(厂)生產类PCS Pieces 个(根,块等)PRS Pairs 双(对等)CTN Carton 卡通箱PAL Pallet/skid 栈板PO Purchasing Order 采购订单MO Manufacture Order 生產单D/C Date Code 生產日期码ID/C Identification Code (供应商)识别码SWR Special Work Request 特殊工作需求L/N Lot Number 批号P/N Part Number 料号其它OEM Original Equipment Manufacture 原设备制造PCE Personal Computer Enclosure 个人电脑外设PC Personal Computer 个人电脑CPU Central Processing Unit 中央处理器SECC SECC` 电解片SGCC SGCC 热浸镀锌材料NHK North of Hongkong 中国大陆PRC People's Republic of China 中国大陆U.S.A the United States of America 美国A.S.A.P As Soon As Possible 尽可能快的E-MAIL Electrical-Mail 电子邮件N/A Not Applicable 不适用QTY Quantity 数量VS 以及REV Revision 版本JIT Just In Time 零库存I/O Input/Output 输入/输出OK Ok 好NG Not Good 不行,不合格C=0 Critical=0 极严重不允许ESD Electry-static Discharge 静电排放5S 希腊语整理,整顿,清扫,清洁,教养ATIN Attention 知会CC Carbon Copy 副本復印相关人员APP Approve 核準,认可,承认CHK Check 确认AM Ante Meridian 上午PM Post Meridian 下午CD Compact Disk 光碟CD-ROM Compact Disk Read-Only Memory 只读光碟FDD Floppy Disk Drive 软碟机HDD Hard Disk Drive 碟碟机REF Reference 仅供参考CONN Connector 连接器CAV Cavity 模穴CAD Computer Aid Design 计算机辅助设计ASS'Y Assembly 装配,组装MAT'S Material 材料IC Integrated Circuit 集成电路T/P True Position 真位度TYP Type 类型WDR Weekly Delivery Requitement 周出货需求C?T Cycle Time 制程周期L/T Lead Time 前置时间(生產前準备时间)S/T Standard Time 标準时间P/M Product Market 產品市场3C Computer,Commumcation,Consumer electronic's 消费性电子5WIH When,Where,Who,What,Why,How to5M Man,Machine,Material,Method,Measurement4MIH Man,Materia,Money,Method,Time 人力,物力,财务,技术,时间(资源) SQA Strategy Quality Assurance 策略品质保证DQA Desigh Quality Assurance 设计品质保证MQA Manufacture Quality Assurance 制造品质保证SSQA Sales and service Quality Assurance 销售及服务品质保证LRR Lot Rejeet Rate 批退率BS Brain storming 脑力激荡EMI Electronic Magnetion Inspect 高磁测试FMI Frequency Modulatim Inspect 高频测试B/M Boar/Molding(flat cable)C/P Connector of PCA/P AssemblySPS Switching power supply 电源箱DT Desk Top 卧式(机箱)MT Mini-Tower 立式(机箱)DVD Digital Vedio DiskVCD Vdeio Compact DiskLCD Liquid Crystal DisplayCAD Computer AID DesignCAM Computer AID ManufacturingCAE Computer AID EngineeringABIOS Achanced Basic in put/output system 先进的基本输入/输出系统CMOS Complemeruary Metoll Oxide Semiconductor 互补金属氧化物半导体PDA Personal Digital Assistant 个人数字助理IC Integrated Circuit 集成电路ISA Industry Standard Architecture 工业标準体制结构MCA Micro Channel Architecture 微通道结构EISA Extended Industry Standard Architecture 扩充的工业标準结构SIMM Single in-line memory module 单项导通匯流组件DIMM Dual in-line Memory Module 双项导通匯流组件LED Light-Emitting Diode 发光二级管FMEA Failure Mode Effectivenes 失效模式分析W/H Wire Harness 金属线绪束集组件F/C Flat Calle 排线PCB Printed Circuit Board 印刷电路板CAR Correction Action Report 改善报告NG Not Good 不良WPR Weekly Delivery Requirement 周出货要求PPM Parts Per Million 百万分之一TPM Total Production Maintenance 全面生產保养MRP Material Requiremcnt Planning 物料需计划OC Operation System 作业系统TBA To Be Design 待定,定缺D/C Drawing ChangeP/P Plans & ProceduneEMI Electrical-Music Industry 电子音乐工业RFI Read Frequency Input 读频输入MMC Maximum Material ConditionMMS Maximum Material SizeLMC Least Material ConditionLMS Least Material Size模具技术用语各种模具常用成形方式accurate die casting 精密压铸 powder forming 粉末成形calendaring molding 压延成形 powder metal forging 粉末锻造cold chamber die casting 冷式压铸 precision forging 精密锻造cold forging 冷锻 press forging 冲锻compacting molding 粉末压出成形 rocking die forging 摇动锻造compound molding 復合成形 rotary forging 回转锻造compression molding 压缩成形 rotational molding 离心成形dip mold 浸渍成形 rubber molding 橡胶成形encapsulation molding 注入成形 sand mold casting 砂模铸造extrusion molding 挤出成形 shell casting 壳模铸造foam forming ?泡成形 sinter forging 烧结锻造forging roll 轧锻 six sides forging 六面锻造gravity casting 重力铸造 slush molding 凝塑成形hollow(blow) molding 中空(吹出)成形 squeeze casting 高压铸造hot chamber die casting 热室压铸 swaging 挤锻hot forging 热锻 transfer molding 转送成形injection molding 射出成形 warm forging 温锻investment casting 精密铸造 matched die method 对模成形法laminating method 被覆淋膜成形 low pressure casting 低压铸造lost wax casting 脱蜡铸造 matched mould thermal forming 对模热成形模各式模具分类用语bismuth mold 鉍铸模 landed plunger mold 有肩柱塞式模具burnishing die 挤光模 landed positive mold 有肩全压式模具button die 镶入式圆形凹模 loading shoe mold 料套式模具center-gated mold 中心浇口式模具 loose detail mold 活零件模具chill mold 冷硬用铸模 loose mold 活动式模具clod hobbing 冷挤压制模 louvering die 百叶窗冲切模composite dies 復合模具 manifold die 分歧管模具counter punch 反凸模 modular mold 组合式模具double stack mold 双层模具 multi-cavity mold 多模穴模具electroformed mold 电铸成形模 multi-gate mold 復式浇口模具expander die 扩径模 offswt bending die 双折冷弯模具extrusion die 挤出模 palletizing die 叠层模family mold 反套制品模具 plaster mold 石膏模blank through dies 漏件式落料模 porous mold 通气性模具duplicated cavity plate 復板模 positive mold 全压式模具fantail die 扇尾形模具 pressure die 压紧模fishtail die 鱼尾形模具 profile die 轮廓模flash mold 溢料式模具 progressive die 顺序模gypsum mold 石膏铸模 protable mold 手提式模具hot-runner mold 热流道模具 prototype mold 雏形试验模具ingot mold 钢锭模 punching die 落料模lancing die 切口模 raising(embossing) 压花起伏成形re-entrant mold 倒角式模具 sectional die 拼合模runless injection mold 无流道冷料模具 sectional die 对合模具segment mold 组合模 semi-positive mold 半全压式模具shaper 定型模套 single cavity mold 单腔模具solid forging die 整体锻模 split forging die 拼合锻模split mold 双并式模具 sprueless mold 无注道残料模具squeezing die 挤压模 stretch form die 拉伸成形模sweeping mold 平刮铸模 swing die 振动模具three plates mold 三片式模具 trimming die 切边模unit mold 单元式模具 universal mold 通用模具unscrewing mold 退扣式模具 yoke type die 軛型模模具厂常用之标準零配件air vent vale 通气阀 anchor pin 锚梢angular pin 角梢 baffle 调节阻板angular pin 倾斜梢 baffle plate 折流档板ball button 球塞套 ball plunger 定位球塞ball slider 球塞滑块 binder plate 压板blank holder 防皱压板 blanking die 落料冲头bolster 上下模板 bottom board 浇注底板bolster 垫板 bottom plate 下固定板bracket 托架 bumper block 缓冲块buster 堵口 casting ladle 浇注包casting lug 铸耳 cavity 模穴(模仁)cavity retainer plate 模穴托板 center pin 中心梢clamping block 锁定块 coil spring 螺旋弹簧cold punched nut 冷冲螺母 cooling spiral 螺旋冷却栓core 心型 core pin 心型梢cotter 开口梢 cross 十字接头cushion pin 缓冲梢 diaphragm gate 盘形浇口die approach 模头料道 die bed 型底die block 块形模体 die body 铸模座die bush 合模衬套 die button 冲模母模die clamper 夹模器 die fastener 模具固定用零件die holder 母模固定板 die lip 模唇die plate 冲模板 die set 冲压模座direct gate 直接浇口 dog chuck 爪牙夹头dowel 定位梢 dowel hole 导套孔dowel pin 合模梢 dozzle 辅助浇口dowel pin 定位梢 draft 拔模锥度draw bead 张力调整桿 drive bearing 传动轴承ejection pad 顶出衬垫 ejector 脱模器ejector guide pin 顶出导梢 ejector leader busher 顶出导梢衬套ejector pad 顶出垫 ejector pin 顶出梢ejector plate 顶出板 ejector rod 顶出桿ejector sleeve 顶出衬套 ejector valve 顶出阀eye bolt 环首螺栓 filling core 椿入蕊film gate 薄膜形浇口 finger pin 指形梢finish machined plate 角形模板 finish machined round plate 圆形模板fixed bolster plate 固定侧模板 flanged pin 带凸缘?flash gate 毛边形浇口 flask 上箱floating punch 浮动冲头 gate 浇口gate land 浇口面 gib 凹形拉紧?goose neck 鹅颈管 guide bushing 引导衬套guide pin 导梢 guide post 引导柱guide plate 导板 guide rail 导轨head punch 顶?冲头 headless punch 直柄冲头heavily tapered solid 整体模蕊盒 hose nippler 管接头impact damper 缓冲器 injection ram 压射柱塞inlay busher 嵌入衬套 inner plunger 内柱塞inner punch 内冲头 insert 嵌件insert pin 嵌件梢 king pin 转向梢king pin bush 主梢衬套 knockout bar 脱模杵land 合模平坦面 land area 合模面leader busher 导梢衬套 lifting pin 起模顶?lining 内衬 locating center punch 定位中心冲头locating pilot pin 定位导梢 locating ring 定位环lock block 压块 locking block 定位块locking plate 定位板 loose bush 活动衬套making die 打印冲子 manifold block 歧管档块master plate 靠模样板 match plate 分型板mold base 塑胶模座 mold clamp 铸模紧固夹mold platen 模用板 moving bolster 换模保持装置moving bolster plate 可动侧模板 one piece casting 整体铸件parallel block 平行垫块 paring line 分模线parting lock set 合模定位器 pass guide 穴型导板peened head punch 镶入式冲头 pilot pin 导?pin gate 针尖浇口 plate 衬板pre extrusion punch 顶挤冲头 punch 冲头puncher 推桿 pusher pin 衬套梢rack 机架 rapping rod 起模桿re-entrant mold 凹入模 retainer pin 嵌件梢retainer plate 托料板 return pin 回位梢riding stripper 浮动脱模器 ring gate 环型浇口roller 滚筒 runner 流道runner ejector set 流道顶出器 runner lock pin 流道拉梢screw plug 头塞 set screw 固定螺丝shedder 脱模装置 shim 分隔片shoe 模座之上下模板 shoot 流道shoulder bolt 肩部螺丝 skeleton 骨架slag riser 冒渣口 slide(slide core) 滑块slip joint 滑配接头 spacer block 间隔块spacer ring 间隔环 spider 模蕊支架spindle 主轴 sprue 注道sprue bushing 注道衬套 sprue bushing guide 注道导套sprue lock bushing 注道定位衬套 sprue puller 注道拉料? spue line 合模线 square key 方键square nut 方螺帽 square thread 方螺纹stop collar 限位套 stop pin 止动梢stop ring 止动环 stopper 定位停止梢straight pin 圆柱? stripper bolt 脱料螺栓stripper bushing 脱模衬套 stripper plate 剥料板stroke end block 行程止梢 submarine gate 潜入式浇口support pillar 支撑支柱/顶出支柱 support pin 支撑梢supporting plate 托板 sweep templete 造模刮板tab gate 辅助浇口 taper key 推拔键。
常用紧固件行业相关术语(中英对照)简体
常用紧固件行业相关术语(中英对照)简体.txt丶︶￣喜欢的歌，静静的听，喜欢的人，远远的看我笑了当初你不挺傲的吗现在您这是又玩哪出呢？组装、冲压、喷漆等专业词匯Assembly line组装线Layout布置图Conveyer流水线物料板Rivet table拉钉机Rivet gun拉钉枪Screw driver起子Electric screw driver电动起子Pneumatic screw driver气动起子worktable 工作桌OOBA开箱检查fit together组装在一起fasten锁紧(螺丝)fixture 夹具(治具)pallet栈板barcode条码barcode scanner条码扫描器fuse together熔合fuse machine热熔机repair修理operator作业员QC品管supervisor 课长ME制造工程师MT制造生技cosmetic inspect外观检查inner parts inspect内部检查thumb screw大头螺丝lbs. inch镑、英寸EMI gasket导电条front plate前板rear plate后板chassis 基座bezel panel面板power button电源按键reset button重置键Hi-pot test of SPS高源高压测试Voltage switch of SPS电源电压接拉键sheet metal parts 冲件plastic parts塑胶件SOP制造作业程序material check list物料检查表work cell工作间trolley臺车carton纸箱sub-line支线left fork叉车personnel resource department人力资源部production department生產部门planning department企划部QC Section品管科stamping factory冲压厂painting factory烤漆厂molding factory成型厂common equipment常用设备uncoiler and straightener整平机punching machine 冲床robot机械手hydraulic machine油压机lathe车床planer |'plein?|刨床miller铣床grinder磨床driller??床linear cutting线切割electrical sparkle电火花welder电焊机staker=reviting machine铆合机position职务president董事长general manager总经理special assistant manager特助factory director厂长department director部长deputy manager | =vice manager副理section supervisor课长deputy section supervisor =vice section superisor副课长group leader/supervisor组长line supervisor线长assistant manager助理to move, to carry, to handle搬运be put in storage入库pack packing包装to apply oil擦油to file burr 銼毛刺final inspection终检to connect material接料to reverse material 翻料wet station沾湿臺Tiana天那水cleaning cloth抹布to load material上料to unload material卸料to return material/stock to退料scraped |'skr?pid|报废scrape ..v.刮;削deficient purchase来料不良manufacture procedure制程deficient manufacturing procedure制程不良oxidation |' ksi'dei?n|氧化scratch刮伤dents压痕defective upsiding down抽芽不良defective to staking铆合不良embedded lump镶块feeding is not in place送料不到位stamping-missing漏冲production capacity生產力education and training教育与训练proposal improvement提案改善spare parts=buffer备件forklift叉车trailer=long vehicle拖板车compound die合模die locker锁模器pressure plate=plate pinch压板bolt螺栓name of a department部门名称administration/general affairs dept总务部automatic screwdriver电动啟子thickness gauge厚薄规gauge(or jig)治具power wire电源线buzzle蜂鸣器defective product label不良标签identifying sheet list标示单screwdriver holder起子插座pedal踩踏板stopper阻挡器flow board流水板hydraulic handjack油压板车forklift叉车pallet栈板glove(s)手套glove(s) with exposed fingers割手套thumb大拇指forefinger食指midfinger中指ring finger无名指little finger小指band-aid创可贴iudustrial alcohol工业酒精alcohol container沾湿臺head of screwdriver起子头sweeper扫把mop拖把vaccum cleaner吸尘器rag 抹布garbage container灰箕garbage can垃圾箱garbage bag垃圾袋chain链条jack升降机production line流水线chain链条槽magnetizer加磁器lamp holder灯架to mop the floor拖地to clean the floor扫地to clean a table擦桌子air pipe 气管packaging tool打包机packaging打包missing part漏件wrong part错件excessive defects过多的缺陷critical defect极严重缺陷major defect主要缺陷minor defect次要缺陷not up to standard不合规格dimension/size is a little bigger尺寸偏大(小) cosmetic defect外观不良slipped screwhead/slippery screw head螺丝滑头slipped screwhead/shippery screw thread滑手speckle斑点mildewed=moldy=mouldy发霉rust生銹deformation变形burr(金属)flash(塑件)毛边poor staking铆合不良excesssive gap间隙过大grease/oil stains油污inclusion杂质painting peel off臟污shrinking/shrinkage缩水mixed color杂色scratch划伤poor processing 制程不良poor incoming part事件不良fold of pakaging belt打包带折皱painting make-up补漆discoloration羿色water spots水渍polishing/surface processing表面处理exposed metal/bare metal金属裸露lack of painting烤漆不到位safety安全quality品质delivery deadline交货期cost成本engineering工程die repair模修enterprise plan = enterprise expansion projects企划QC品管die worker模工production, to produce生產equipment设备to start a press开机stop/switch off a press关机classification整理regulation整顿cleanness清扫conservation清洁culture教养qualified products, up-to-grade products良品defective products, not up-to-grade products不良品waste废料board看板feeder送料机sliding rack滑料架defective product box不良品箱die change 换模to fix a die装模to take apart a die拆模to repair a die修模packing material包材basket蝴蝶竺plastic basket胶筐isolating plate baffle plate; barricade隔板carton box纸箱to pull and stretch拉深to put material in place, to cut material, to input落料to impose lines压线to compress, compressing压缩character die字模to feed, feeding送料transportation运输(be)qualfied, up to grade合格not up to grade, not qualified不合格material change, stock change材料变更feature change 特性变更evaluation评估prepare for, make preparations for 準备parameters参数rotating speed, revolution转速manufacture management制造管理abnormal handling异常处理production unit生產单位lots of production生產批量steel plate钢板roll material卷料manufacture procedure制程operation procedure作业流程to revise, modify修订to switch over to, switch---to throw--over switching over切换engineering, project difficulty工程瓶颈stage die工程模automation自动化to stake, staking, reviting铆合add lubricating oil加润滑油shut die架模shut height of a die架模高度analog-mode device类模器die lifter举模器argon welding氬焊vocabulary for stamping冲压常词匯stamping, press冲压punch press, dieing out press冲床uncoiler & strainghtener整平机feeder送料机rack, shelf, stack料架cylinder油缸robot机械手taker取料机conveyer belt输送带transmission rack输送架top stop上死点bottom stop下死点one stroke一行程inch寸动to continue, cont.连动to grip(material)吸料location lump, locating piece, block stop 定位块reset復位smoothly顺利dent压痕scratch刮伤deformation变形filings铁削to draw holes抽孔inquiry, search for查寻to stock, storage, in stock库存receive领取approval examine and verify审核processing, to process加工delivery, to deliver 交货to return delivenry to.to send delinery backto retrn of goods退货registration登记registration card登记卡to control管制to put forward and hand in提报safe stock安全库存acceptance = receive验收to notice通知application form for purchase请购单consume, consumption消耗to fill in填写abrasion磨损reverse angle = chamfer倒角character die字模to collect, to gather收集failure, trouble故障statistics统计demand and supply需求career card履歷卡to take apart a die卸下模具to load a die装上模具to tight a bolt拧紧螺栓to looser a bolt拧松螺栓to move away a die plate移走模板easily damaged parts易损件standard parts标準件breaking.(be)broken,(be)cracked 断裂to lubricate润滑common vocabulary for die engineering 模具工程常用词匯die 模具figure file, chart file图档cutting die, blanking die冲裁模progressive die, follow (-on)die连续模compound die復合模punched hole冲孔panel board镶块to cutedges=side cut=side scrap切边to bending折弯to pull, to stretch拉伸Line streching, line pulling线拉伸engraving, to engrave刻印upsiding down edges翻边to stake铆合designing, to design设计design modification设计变化die block模块folded block折弯块sliding block滑块location pin定位销lifting pin顶料销die plate, front board模板padding block垫块stepping bar垫条upper die base上模座lower die base下模座upper supporting blank上承板upper padding plate blank上垫板spare dies模具备品spring 弹簧bolt螺栓document folder文件夹file folder资料夹to put file in order整理资料spare tools location手工备品仓first count初盘人first check初盘復棹人second count 復盘人second check復盘復核人equipment设备waste materials废料work in progress product在制品casing = containerazation装箱quantity of physical invetory second count 復盘点数量quantity of customs count会计师盘,点数量the first page第一联filed by accounting department for reference会计部存查end-user/using unit(department)使用单位summary of year-end physical inventory bills年终盘点截止单据匯总表bill name单据名称This sheet and physical inventory list will be sent to accounting department together (Those of NHK will be sent to financial department)本表请与盘点清册一起送会计部－(NHK厂区送财会部)Application status records of year-end physical inventory List and physical inventory card 年终盘点卡与清册使用－状况明细表blank and waste sheet NO.空白与作废单号plate电镀mold成型material for engineering mold testing工程试模材料not included in physical inventory不列入盘点sample样品incoming material to be inspected进货待验description品名steel/rolled steel钢材material statistics sheet物料统计明细表meeting minutes会议记录meeting type 会别distribution department分发单位location地点chairman主席present members出席人员subject主题conclusion结论decision items决议事项responsible department负责单位pre-fixed finishing date预定完成日approved by / checked by / prepared by核準/审核/承办PCE assembly production schedule sheetPCE组装厂生產排配表model机钟work order工令revision版次remark备注production control confirmation生產确认checked by初审approved by核準department部门stock age analysis sheet库存货龄分析表on-hand inventory现有库存available material良品可使用obsolete material良品已呆滞to be inspected or reworked待验或重工total合计cause description原因说明part number/ P/N 料号type形态item/group/class类别quality品质prepared by制表notes说明year-end physical inventory difference analysis sheet年终盘点差异分析表physical inventory盘点数量physical count quantity帐面数量difference quantity差异量cause analysis原因分析raw materials原料materials物料finished product成品semi-finished product半成品packing materials包材good product/accepted goods/ accepted parts/good parts良品defective product/non-good parts不良品disposed goods处理品warehouse/hub仓库on way location在途仓oversea location海外仓spare parts physical inventory list备品盘点清单spare molds location模具备品仓skid/pallet栈板tox machine自铆机wire EDM线割EDM放电机coil stock卷料sheet stock片料tolerance工差score=groove压线cam block滑块pilot导正筒trim剪外边pierce剪内边drag form压锻差pocket for the punch head掛鉤槽slug hole废料孔feature die公母模expansion dwg展开图radius半径shim(wedge)楔子torch-flame cut火焰切割set screw止付螺丝form block折刀stop pin定位销round pierce punch=die button圆冲子shape punch=die insert异形子stock locater block定位块under cut=scrap chopper清角active plate活动板baffle plate挡块cover plate盖板male die公模female die母模groove punch压线冲子air-cushion eject-rod气垫顶桿spring-box eject-plate弹簧箱顶板bushing block衬套insert 入块club car高尔夫球车capability能力parameter参数factor系数phosphate皮膜化成viscosity涂料粘度alkalidipping脱脂main manifold主集流脉bezel斜视规blanking穿落模dejecting顶固模demagnetization去磁;消磁high-speed transmission高速传递heat dissipation热传rack上料degrease脱脂rinse水洗alkaline etch龄咬desmut剥黑膜D.I. rinse纯水次Chromate铬酸处理Anodize阳性处理seal封孔revision版次part number/P/N料号good products良品scraped products报放心品defective products不良品finished products成品disposed products处理品barcode条码flow chart流程表单assembly组装stamping冲压molding成型spare parts=buffer备品coordinate座标dismantle the die折模auxiliary fuction辅助功能poly-line多义线heater band 加热片thermocouple热电偶sand blasting喷沙grit 砂砾derusting machine除銹机degate打浇口dryer烘干机induction感应induction light感应光response=reaction=interaction感应ram连桿edge finder巡边器concave凸convex凹short射料不足nick缺口speck瑕??shine亮班splay 银纹gas mark焦痕delamination起鳞cold slug冷块blush 导色gouge沟槽;凿槽satin texture段面咬花witness line证示线patent专利grit沙砾granule=peuet=grain细粒grit maker抽粒机cushion缓冲magnalium镁铝合金magnesium镁金metal plate鈑金lathe车mill銼plane刨grind磨drill铝boring鏜blinster气泡fillet镶;嵌边through-hole form通孔形式voller pin formality滚针形式cam driver铡楔shank摸柄crank shaft曲柄轴augular offset角度偏差velocity速度production tempo生產进度现状torque扭矩spline=the multiple keys花键quenching淬火tempering回火annealing退火carbonization碳化alloy合金tungsten high speed steel钨高速的moly high speed steel鉬高速的organic solvent有机溶剂bracket小磁导liaison联络单volatile挥发性resistance电阻ion离子titrator滴定仪beacon警示灯coolant冷却液crusher破碎机模具工程类plain die简易模pierce die冲孔模forming die成型模progressive die连续模gang dies復合模shearing die剪边模riveting die铆合模pierce冲孔forming成型(抽凸,冲凸)draw hole抽孔bending折弯trim切边emboss凸点dome凸圆semi-shearing半剪stamp mark冲记号deburr or coin压毛边punch riveting冲压铆合side stretch侧冲压平reel stretch卷圆压平groove压线blanking下料stamp letter冲字(料号) shearing剪断tick-mark nearside正面压印tick-mark farside反面压印冲压名称类extension dwg展开图procedure dwg工程图die structure dwg模具结构图material材质material thickness料片厚度factor系数upward向上downward向下press specification冲床规格die height range适用模高die height闭模高度burr毛边gap间隙weight重量total wt.总重量punch wt.上模重量五金零件类inner guiding post内导柱inner hexagon screw内六角螺钉dowel pin固定销coil spring弹簧lifter pin顶料销eq-height sleeves=spool等高套筒pin销lifter guide pin浮升导料销guide pin导正销wire spring圆线弹簧outer guiding post外导柱stop screw止付螺丝located pin定位销outer bush外导套模板类top plate上托板（顶板）top block上垫脚punch set上模座punch pad上垫板punch holder上夹板stripper pad脱料背板up stripper上脱料板male die公模(凸模)feature die公母模female die母模(凹模)upper plate上模板lower plate下模板die pad下垫板die holder下夹板die set下模座bottom block下垫脚bottom plate下托板(底板) stripping plate内外打(脱料板) outer stripper外脱料板inner stripper内脱料板lower stripper下脱料板零件类punch冲头insert入块(嵌入件)deburring punch压毛边冲子groove punch压线冲子stamped punch字模冲子round punch圆冲子special shape punch异形冲子bending block折刀roller滚轴baffle plate挡块located block定位块supporting block for location 定位支承块air cushion plate气垫板air-cushion eject-rod气垫顶桿trimming punch切边冲子stiffening rib punch = stinger 加强筋冲子ribbon punch压筋冲子reel-stretch punch卷圆压平冲子guide plate定位板sliding block滑块sliding dowel block滑块固定块active plate活动板lower sliding plate下滑块板upper holder block上压块upper mid plate上中间板spring box弹簧箱spring-box eject-rod弹簧箱顶桿spring-box eject-plate弹簧箱顶板bushing bolck衬套cover plate盖板guide pad导料块塑件&模具相关英文compre sion molding压缩成型flash mold溢流式模具plsitive mold挤压式模具split mold分割式模具cavity型控母模core模心公模taper锥拔leather cloak仿皮革shiver饰纹flow mark流痕welding mark溶合痕post screw insert螺纹套筒埋值self tapping screw自攻螺丝striper plate脱料板piston活塞cylinder汽缸套chip细碎物handle mold手持式模具移转成型用模具encapsulation molding低压封装成型射出成型用模具two plate两极式（模具）well type蓄料井insulated runner绝缘浇道方式hot runner热浇道runner plat浇道模块valve gate阀门浇口band heater环带状的电热器spindle阀针spear head刨尖头slag well冷料井cold slag冷料渣air vent排气道h=0.02~0.05mmw=3.2mmL=3~5mmwelding line熔合痕eject pin顶出针knock pin顶出销return pin回位销反顶针sleave套筒stripper plate脱料板insert core放置入子runner stripper plate浇道脱料板guide pin导销eject rod (bar)（成型机）顶业捧subzero深冷处理three plate三极式模具runner system浇道系统stress crack应力电裂orientation定向sprue gate射料浇口，直浇口nozzle射嘴sprue lock pin料头鉤销(拉料桿) slag well冷料井side gate侧浇口edge gate侧缘浇口tab gate搭接浇口film gate薄膜浇口flash gate闸门浇口slit gate缝隙浇口fan gate扇形浇口dish gate因盘形浇口H=F=1/2t~1/5tT=2.5~3.5mmdiaphragm gate隔膜浇口ring gate环形浇口subarine gate潜入式浇口tunnel gate隧道式浇口pin gate针点浇口Φ0.8~1.0mmRunner less无浇道(sprue less)无射料管方式long nozzle延长喷嘴方式sprue浇口;溶渣品质人员名称类QC quality control 品质管理人员FQC final quality control 终点品质管制人员IPQC in process quality control 制程中的品质管制人员OQC output quality control 最终出货品质管制人员IQC incoming quality control 进料品质管制人员TQC total quality control 全面质量管理POC passage quality control 段检人员QA quality assurance 质量保证人员OQA output quality assurance 出货质量保证人员QE quality engineering 品质工程人员品质保证类FAI first article inspection 新品首件检查FAA first article assurance 首件确认TVR tool verification report 模具确认报告3B 3B 模具正式投產前确认CP capability index 能力指数CPK capability index of process 模具制程能力参数SSQA standardized supplier quality 合格供应商品质评估OOBA out of box audit 开箱检查QFD quality function deployment 品质机能展开FMEA failure model effectiveness analysis 失效模式分析8 disciplines 8项回復内容FA final audit 最后一次稽核CAR corrective action request 改正行动要求corrective action report 改正行动报告FQC运作类AQL Acceptable Quality Level 运作类允收品质水準S/S Sample size 抽样检验样本大小ACC Accept 允收REE Reject 拒收CR Critical 极严重的MAJ Major 主要的MIN Minor 轻微的AOQ Average Output Quality 平均出厂品质AOQL Average Output Quality Level 平均出厂品质Q/R/S Quality/Reliability/Service 品质/可靠度服务MIL-STD Military-Standard 军用标準S I-S IV Special I-Special IV 特殊抽样水準等级P/N Part Number 料号L/N Lot Number 特采AOD Accept On Deviation 特采UAI Use As It 首件检查报告FPIR First Piece Inspection Report 百万分之一PPM Percent Per Million 批号制程统计品管专类SPC Statistical Process Control 统计制程管制SQC Statistical Quality Control 统计品质管制R Range 全距AR Averary Range 全距平均值UCL Upper Central Limit 管制上限LCL Lower Central Limit 管制下限MAX Maximum 最大值MIN Minimum 最小值GRR Gauge Reproducibility&Repeatability 量具之再制性及重测性判断量可靠与否DIM Dimension 尺寸DIA Diameter 直径FREQ Frequency 频率N Number 样品数其它品质术语类QCC Quality Control Circle 品质圈QIT Quality Improvement Team 品质改善小组PDCA Plan Do Check Action 计划执行检查总结ZD Zero Defect 零缺点QI Quality Improvement 品质改善QP Quality Policy 目标方针TQM Total Quality Management 全面品质管理MRB Material Reject Bill 退货单LQL Limiting Quality Level 最低品质水準RMA Return Material Audit 退料认可QAN Quality Amelionrate Notice 品质改善活动ADM Absolute Dimension Measuremat 全尺寸测量QT Quality Target 品质目标7QCTools 7 Quality Controll Tools 品管七大手法通用之件类ECN Engineering Change Notes 工程变更通知(供应商)ECO Engineering Change Order 工程改动要求(客户)PCN Process Change Notice 工序改动通知PMP Product Management Plan 生產管制计划SIP Specification In Process 制程检验规格SOP Standard Operation Procedure 制造作业规范IS Inspection Specification 成品检验规范BOM Bill Of Material 物料清单PS Package Specification 包装规范SPEC Specification 规格DWG Drawing 图面系统文件类QC Quality System 品质系统ES Engineering Standarization 工程标準CGOO China General PCE龙华厂文件H Huston (美国)休斯敦C Compaq (美国)康伯公司C China 中国大陆A Assembly 组装(厂)S Stamping 冲压(厂)P Painting 烤漆(厂)I Intel 英特尔公司T TAIWAN 臺湾IWS International Workman Standard 工艺标準ISO International Standard Organization 国际标準化组织GS General Specification 一般规格CMCS C-China M-Manufact C-Compaq S-Stamping Compaq產品在龙华冲压厂制造作业规范CQCA Q-Quality A-Assembly Compaq產品在龙华组装厂品管作业规范CQCP P-Painting Compaq產品在龙华烤漆厂品管作业规范部类PMC Production & Material Control 生產和物料控制PPC Production Plan Control 生產计划控制MC Material Control 物料控制ME Manafacture Engineering 制造工程部PE Project Engineering 產品工程部A/C Accountant Dept 会计部P/A Personal & Administration 人事行政部DC Document Center 资料中心QE Quality Engineering 品质工程(部)QA Quality Assurance 品质保证(处)QC Quality Control 品质管制(课)PD Product Department 生產部LAB Labratry 实验室IE Industrial Engineering 工业工程R&D Research & Design 设计开发部P Painting 烤漆(厂)A Asssembly 组装(厂)S Stamping 冲压(厂)生產类PCS Pieces 个(根,块等)PRS Pairs 双(对等)CTN Carton 卡通箱PAL Pallet/skid 栈板PO Purchasing Order 采购订单MO Manufacture Order 生產单D/C Date Code 生產日期码ID/C Identification Code (供应商)识别码SWR Special Work Request 特殊工作需求L/N Lot Number 批号P/N Part Number 料号其它OEM Original Equipment Manufacture 原设备制造PCE Personal Computer Enclosure 个人电脑外设PC Personal Computer 个人电脑CPU Central Processing Unit 中央处理器SECC SECC` 电解片SGCC SGCC 热浸镀锌材料NHK North of Hongkong 中国大陆PRC People's Republic of China 中国大陆U.S.A the United States of America 美国A.S.A.P As Soon As Possible 尽可能快的E-MAIL Electrical-Mail 电子邮件N/A Not Applicable 不适用QTY Quantity 数量VS 以及REV Revision 版本JIT Just In Time 零库存I/O Input/Output 输入/输出OK Ok 好NG Not Good 不行,不合格C=0 Critical=0 极严重不允许ESD Electry-static Discharge 静电排放5S 希腊语整理,整顿,清扫,清洁,教养ATIN Attention 知会CC Carbon Copy 副本復印相关人员APP Approve 核準,认可,承认CHK Check 确认AM Ante Meridian 上午PM Post Meridian 下午CD Compact Disk 光碟CD-ROM Compact Disk Read-Only Memory 只读光碟FDD Floppy Disk Drive 软碟机HDD Hard Disk Drive 碟碟机REF Reference 仅供参考CONN Connector 连接器CAV Cavity 模穴CAD Computer Aid Design 计算机辅助设计ASS'Y Assembly 装配,组装MAT'S Material 材料IC Integrated Circuit 集成电路T/P True Position 真位度TYP Type 类型WDR Weekly Delivery Requitement 周出货需求C?T Cycle Time 制程周期L/T Lead Time 前置时间(生產前準备时间)S/T Standard Time 标準时间P/M Product Market 產品市场3C Computer,Commumcation,Consumer electronic's 消费性电子5WIH When,Where,Who,What,Why,How to5M Man,Machine,Material,Method,Measurement4MIH Man,Materia,Money,Method,Time 人力,物力,财务,技术,时间(资源) SQA Strategy Quality Assurance 策略品质保证DQA Desigh Quality Assurance 设计品质保证MQA Manufacture Quality Assurance 制造品质保证SSQA Sales and service Quality Assurance 销售及服务品质保证LRR Lot Rejeet Rate 批退率BS Brain storming 脑力激荡EMI Electronic Magnetion Inspect 高磁测试FMI Frequency Modulatim Inspect 高频测试B/M Boar/Molding(flat cable)C/P Connector of PCA/P AssemblySPS Switching power supply 电源箱DT Desk Top 卧式(机箱)MT Mini-Tower 立式(机箱)DVD Digital Vedio DiskVCD Vdeio Compact DiskLCD Liquid Crystal DisplayCAD Computer AID DesignCAM Computer AID ManufacturingCAE Computer AID EngineeringABIOS Achanced Basic in put/output system 先进的基本输入/输出系统CMOS Complemeruary Metoll Oxide Semiconductor 互补金属氧化物半导体PDA Personal Digital Assistant 个人数字助理IC Integrated Circuit 集成电路ISA Industry Standard Architecture 工业标準体制结构MCA Micro Channel Architecture 微通道结构EISA Extended Industry Standard Architecture 扩充的工业标準结构SIMM Single in-line memory module 单项导通匯流组件DIMM Dual in-line Memory Module 双项导通匯流组件LED Light-Emitting Diode 发光二级管FMEA Failure Mode Effectivenes 失效模式分析W/H Wire Harness 金属线绪束集组件F/C Flat Calle 排线PCB Printed Circuit Board 印刷电路板CAR Correction Action Report 改善报告NG Not Good 不良WPR Weekly Delivery Requirement 周出货要求PPM Parts Per Million 百万分之一TPM Total Production Maintenance 全面生產保养MRP Material Requiremcnt Planning 物料需计划OC Operation System 作业系统TBA To Be Design 待定,定缺D/C Drawing ChangeP/P Plans & ProceduneEMI Electrical-Music Industry 电子音乐工业RFI Read Frequency Input 读频输入MMC Maximum Material ConditionMMS Maximum Material SizeLMC Least Material ConditionLMS Least Material Size模具技术用语各种模具常用成形方式accurate die casting 精密压铸 powder forming 粉末成形calendaring molding 压延成形 powder metal forging 粉末锻造cold chamber die casting 冷式压铸 precision forging 精密锻造cold forging 冷锻 press forging 冲锻compacting molding 粉末压出成形 rocking die forging 摇动锻造compound molding 復合成形 rotary forging 回转锻造compression molding 压缩成形 rotational molding 离心成形dip mold 浸渍成形 rubber molding 橡胶成形encapsulation molding 注入成形 sand mold casting 砂模铸造extrusion molding 挤出成形 shell casting 壳模铸造foam forming ?泡成形 sinter forging 烧结锻造forging roll 轧锻 six sides forging 六面锻造gravity casting 重力铸造 slush molding 凝塑成形hollow(blow) molding 中空(吹出)成形 squeeze casting 高压铸造hot chamber die casting 热室压铸 swaging 挤锻hot forging 热锻 transfer molding 转送成形injection molding 射出成形 warm forging 温锻investment casting 精密铸造 matched die method 对模成形法laminating method 被覆淋膜成形 low pressure casting 低压铸造lost wax casting 脱蜡铸造 matched mould thermal forming 对模热成形模各式模具分类用语bismuth mold 鉍铸模 landed plunger mold 有肩柱塞式模具burnishing die 挤光模 landed positive mold 有肩全压式模具button die 镶入式圆形凹模 loading shoe mold 料套式模具center-gated mold 中心浇口式模具 loose detail mold 活零件模具chill mold 冷硬用铸模 loose mold 活动式模具clod hobbing 冷挤压制模 louvering die 百叶窗冲切模composite dies 復合模具 manifold die 分歧管模具counter punch 反凸模 modular mold 组合式模具double stack mold 双层模具 multi-cavity mold 多模穴模具electroformed mold 电铸成形模 multi-gate mold 復式浇口模具expander die 扩径模 offswt bending die 双折冷弯模具extrusion die 挤出模 palletizing die 叠层模family mold 反套制品模具 plaster mold 石膏模blank through dies 漏件式落料模 porous mold 通气性模具duplicated cavity plate 復板模 positive mold 全压式模具fantail die 扇尾形模具 pressure die 压紧模fishtail die 鱼尾形模具 profile die 轮廓模flash mold 溢料式模具 progressive die 顺序模gypsum mold 石膏铸模 protable mold 手提式模具hot-runner mold 热流道模具 prototype mold 雏形试验模具ingot mold 钢锭模 punching die 落料模lancing die 切口模 raising(embossing) 压花起伏成形re-entrant mold 倒角式模具 sectional die 拼合模runless injection mold 无流道冷料模具 sectional die 对合模具segment mold 组合模 semi-positive mold 半全压式模具shaper 定型模套 single cavity mold 单腔模具solid forging die 整体锻模 split forging die 拼合锻模split mold 双并式模具 sprueless mold 无注道残料模具squeezing die 挤压模 stretch form die 拉伸成形模sweeping mold 平刮铸模 swing die 振动模具three plates mold 三片式模具 trimming die 切边模unit mold 单元式模具 universal mold 通用模具unscrewing mold 退扣式模具 yoke type die 軛型模模具厂常用之标準零配件air vent vale 通气阀 anchor pin 锚梢angular pin 角梢 baffle 调节阻板angular pin 倾斜梢 baffle plate 折流档板ball button 球塞套 ball plunger 定位球塞ball slider 球塞滑块 binder plate 压板blank holder 防皱压板 blanking die 落料冲头bolster 上下模板 bottom board 浇注底板bolster 垫板 bottom plate 下固定板bracket 托架 bumper block 缓冲块buster 堵口 casting ladle 浇注包casting lug 铸耳 cavity 模穴(模仁)cavity retainer plate 模穴托板 center pin 中心梢clamping block 锁定块 coil spring 螺旋弹簧cold punched nut 冷冲螺母 cooling spiral 螺旋冷却栓core 心型 core pin 心型梢cotter 开口梢 cross 十字接头cushion pin 缓冲梢 diaphragm gate 盘形浇口die approach 模头料道 die bed 型底die block 块形模体 die body 铸模座die bush 合模衬套 die button 冲模母模die clamper 夹模器 die fastener 模具固定用零件die holder 母模固定板 die lip 模唇die plate 冲模板 die set 冲压模座direct gate 直接浇口 dog chuck 爪牙夹头dowel 定位梢 dowel hole 导套孔dowel pin 合模梢 dozzle 辅助浇口dowel pin 定位梢 draft 拔模锥度draw bead 张力调整桿 drive bearing 传动轴承ejection pad 顶出衬垫 ejector 脱模器ejector guide pin 顶出导梢 ejector leader busher 顶出导梢衬套ejector pad 顶出垫 ejector pin 顶出梢ejector plate 顶出板 ejector rod 顶出桿ejector sleeve 顶出衬套 ejector valve 顶出阀eye bolt 环首螺栓 filling core 椿入蕊film gate 薄膜形浇口 finger pin 指形梢finish machined plate 角形模板 finish machined round plate 圆形模板fixed bolster plate 固定侧模板 flanged pin 带凸缘?flash gate 毛边形浇口 flask 上箱floating punch 浮动冲头 gate 浇口gate land 浇口面 gib 凹形拉紧?goose neck 鹅颈管 guide bushing 引导衬套guide pin 导梢 guide post 引导柱guide plate 导板 guide rail 导轨head punch 顶?冲头 headless punch 直柄冲头heavily tapered solid 整体模蕊盒 hose nippler 管接头impact damper 缓冲器 injection ram 压射柱塞inlay busher 嵌入衬套 inner plunger 内柱塞inner punch 内冲头 insert 嵌件insert pin 嵌件梢 king pin 转向梢king pin bush 主梢衬套 knockout bar 脱模杵land 合模平坦面 land area 合模面leader busher 导梢衬套 lifting pin 起模顶?lining 内衬 locating center punch 定位中心冲头locating pilot pin 定位导梢 locating ring 定位环lock block 压块 locking block 定位块locking plate 定位板 loose bush 活动衬套making die 打印冲子 manifold block 歧管档块master plate 靠模样板 match plate 分型板mold base 塑胶模座 mold clamp 铸模紧固夹mold platen 模用板 moving bolster 换模保持装置moving bolster plate 可动侧模板 one piece casting 整体铸件parallel block 平行垫块 paring line 分模线parting lock set 合模定位器 pass guide 穴型导板peened head punch 镶入式冲头 pilot pin 导?pin gate 针尖浇口 plate 衬板pre extrusion punch 顶挤冲头 punch 冲头puncher 推桿 pusher pin 衬套梢rack 机架 rapping rod 起模桿re-entrant mold 凹入模 retainer pin 嵌件梢retainer plate 托料板 return pin 回位梢riding stripper 浮动脱模器 ring gate 环型浇口roller 滚筒 runner 流道runner ejector set 流道顶出器 runner lock pin 流道拉梢screw plug 头塞 set screw 固定螺丝shedder 脱模装置 shim 分隔片shoe 模座之上下模板 shoot 流道shoulder bolt 肩部螺丝 skeleton 骨架slag riser 冒渣口 slide(slide core) 滑块slip joint 滑配接头 spacer block 间隔块spacer ring 间隔环 spider 模蕊支架spindle 主轴 sprue 注道sprue bushing 注道衬套 sprue bushing guide 注道导套sprue lock bushing 注道定位衬套 sprue puller 注道拉料? spue line 合模线 square key 方键square nut 方螺帽 square thread 方螺纹stop collar 限位套 stop pin 止动梢stop ring 止动环 stopper 定位停止梢straight pin 圆柱? stripper bolt 脱料螺栓stripper bushing 脱模衬套 stripper plate 剥料板stroke end block 行程止梢 submarine gate 潜入式浇口support pillar 支撑支柱/顶出支柱 support pin 支撑梢supporting plate 托板 sweep templete 造模刮板tab gate 辅助浇口 taper key 推拔键。
常用紧固件相关英语(中英对照)
螺纹大径：Major Diam中径：Pitch diam底径：Minor diam通止规：Go/No go gage机械性能：mechanical and physical propertiesunified thread 统一英制螺纹Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement 镀后去氢，防止氢脆Case carburization 表面渗碳With across flats 对边With across corners 对角Radius of fillet:头下圆角Transition thread length 过度螺纹Wrenching height 扳拧高度Rockwell 铬氏硬度Vickers 维氏硬度Brinell 布氏硬度Metallography microscope 金相显微镜Salt spray device 盐雾试验箱Tensile testing machine 拉力试验机Cold forming 冷打Hot forging 红镦P C 8 = property class 8 机械性能8级原材料：Raw material球化退火：Annealing冷拔：Drawing冷镦：Forming机加工：Machining螺纹成型：Roll Threading热处理：heat-treatment表面处理：finish去氢：Lustrating hydrogen检验：Inspection包装：Packing入库：Stocking车床：lathe磨制：grinding红打：hot forging冲压：punching1 标准GB （国标）DIN （德制）JIS （日标）ANSI （美标）BA （英制）2 螺纹M. MF (公制牙)UNC.UNF (美制牙)BSW.BSF (英制牙)3 海关编码73181500 螺栓73181600 螺帽73182100 垫圈6-bobes recess 内梅花BO=black oxide 氧化发黑IHH=ind hex head 锯六角头PH=phillips 十字槽sw/fw=split washer/flatwasher 弹垫平垫kep nut 锁紧螺母cementation 渗碳acorn nut 盖形螺母螺丝头型Pan 圆头(盘头)Oval 半沉头H.W.H.. 六角小法兰H.W.F. 六角大法兰CSK 沙拉头(沉头)Large wafer 大扁平头Bugle 喇叭头Truss 盘头带垫Pozi 米制槽Phill 十字槽Serra-tion 垫下带花Flower Head 开花头欧洲标准EN国际标准化组织国际标准化组织标准ISO 国际电工委员会国际电工委员会标准IEC 国际国际电信联盟标准ITU欧共体欧洲电子元器件协会标准CECC德国德国标准DIN英国英国标准BS美国美国国家标准ANSI美国美国材料与试验协会标准ASTM美国美国机械工程师协会标准ASME美国美国电子工业协会标准EIA美国美国连接电子学工业协会标准IPC美国美国焊接协会标准AWS美国美国石油协会标准API美国美国国家公路与运输商协会标准AASHTO美国美国加热制冷与空调工程师协会标准ASHRAE 美国美国电气制造商协会标准NEMA美国美国给水工程协会标准AWWA美国美国仪器、系统与自动化协会标准ISA美国美国保险商实验室标准UL美国电气与电子工程师协会标准IEEE美国美国机动工程师协会标准SAE美国美国腐蚀工程师协会标准NACE美国美国纺织化学师与印染师协会标准AATCC美国美国钢结构油漆标准SSPC美国美国铝协会标准AA美国美国卫生工程协会标准ASSE美国美国煤气协会标准AGA美国美国阀门及配件工业协会标准MSS美国美国音频工程协会标准AES美国美国建筑小五金制造商协会标准BHMA美国美国国家卫生基金会标准NSF美国美国标准NISO,PFI,RWMA美国美国信息与图像管理协会标准AIIM美国美国空调与制冷学会标准ARI美国美国军用标准MIL美国美国防火协会标准NFPA美国美国航空无线电设备标准ARINC美国美国齿轮协会标准AGMA加拿大加拿大标准协会标准CSA加拿大加拿大通用标准局标准CGSB澳大利亚澳大利亚国家标准AS德国德国工程师协会标准VDI欧共体欧洲电信标准ETSI法国法国标准NF日本日本工业标准JIS中国国家标准GB中国机械工业标准JB 中国电子工业标准SJ。
最全紧固件中英文对照
最全紧固件中英文对照，外贸必备词典！一、紧固件Fasteners标准紧固件StandardFasteners非标准紧固件NonstandardFasteners特殊紧固件SpecialFasteners汽车紧固件AutomotiveFasteners铜制紧固件BrassFasteners航天用紧固件AerospaceFasteners精密紧固件PrecisionFasteners化学紧固件ChemicalFasteners摩托车紧固件MotorcycleFasteners不锈钢紧固件StainlessSteelFasteners铁道紧固件RailwayFasteners防松紧固件Self-lockingFasteners高强度紧固件HighstrengthFastenersPEM紧固件PEMFasteners钢结构紧固件SteelStructuralFasteners压铆紧固件Self-ClinchingFasteners铝制紧固件AluminumFasteners钛合金紧固件TitaniumAlloyFasteners尼龙紧固件NylonFasteners精制紧固件FinishedFastener粗制紧固件UnfinishedFastener螺纹紧固件ThreadedFastener半精制紧固件Semi-FinishedFastener抗剪紧固件ShearFastener抗拉紧固件TensionFastener面板紧固件PanelFasteners二、螺栓Bolts六角头螺栓HexagonHeadBolts六角法兰面螺栓HexagonFlangeBolts轨道螺栓（鱼尾螺丝）TrackBolts高强度螺栓HighStrengthBolts地脚螺栓EyeletBolts马车螺栓CarriageBolts护拦螺栓GuardrailBots焊接螺栓WeldBolts双头螺栓DoubleEndBolts钢结构连接副StructuralBolting内六角螺栓HexSocketBolts合金钢螺栓AlloySteelBolts复合材料用螺钉（夹板用）ParticleBoardScrews犁壁螺钉PlowBolts不锈钢木螺丝StainlessSteelWoodScrews套挂螺栓及螺钉ToggleBolts钛合金膨胀螺钉TitaniumAlloyExpansionBolts不锈钢高低牙螺钉StainlessSteelHigh-LowThreadScrews 不锈钢机械螺钉StainlessSteelMachineScrews不锈钢钻尾螺钉StainlessSteelSelfDrillingScrews不锈钢自攻螺钉StainlessSteelSelfTappingScrews不锈钢自削螺钉StainlessSteelThreadCuttingScrews不锈钢三角牙螺钉StainlessSteelTri-LobularThreadScrews 不锈钢宽牙螺钉StainlessSteelCoarseThreadScrews开槽沉头螺钉SlottedFlatCountersunkHeadMachineScrews 开槽盘头螺钉SlottedPanHeadMachineScrews十字槽盘头螺钉CrossRecessedPanHeadMachineScrews 滚花头台阶螺钉KnurledThurmbScrews六角头木螺钉HexagonHeadWoodScrews平头滚花螺钉KnurledThinThumbScrews?四、螺母/螺帽Nuts六角螺母HexagonNuts六角盖形螺母HexCapNuts六角锯齿螺母HexSerratedNuts六角法兰螺母HexFlangeNuts六角平面螺母HexFlatNuts六角厚螺母HexThickNuts重型六角开槽螺母HeavyHexagonSlottedNuts高脚螺母HexCouplingNuts(HighNuts)圆螺母RoundNuts四角螺母/四方螺母SquareNuts四方焊接螺母SquareWeldNuts四爪螺母Four-ClawNuts管用螺母PipeNuts轮壳螺母WheelNuts蝶型螺母WingNutsU形螺母UNutsT形螺母TNuts环首螺母EyeNuts齿形螺母KepNuts齿花螺母ClinchNuts焊接螺帽WeldNuts压铆螺母Self-clinchingNuts高张力螺母HighStrengthNuts建业用螺母StructuralNuts不锈钢螺母StainlessSteelNuts铜螺母BrassNuts铝螺母AluminumNuts合金钢螺母AlloySteelNuts重型车螺母HeavyDutyWheelHubNuts铁器焊接袋帽AcornCapNuts金属预置扭矩式螺母All-MetalPrevailingTorqueTypeNuts壁虎螺母AnchorNuts大尺寸螺母BigSizeNuts铁盖袋帽ClosedEndAcornNuts盘形华司螺母ConicalWasherNuts铁盖+尼龙圈组合盖帽Din986DomedCapNuts法兰尼龙盖帽FlangeNylonInsertLockNuts平面华司螺母FlatWasherNuts六角割沟螺母HexSlottedNuts自锁螺母Self-LockingNuts制止螺母SlidingNutsSLN-自动防松螺母SLNSelf-LockingNuts特殊螺母SpecialNuts弹簧螺母SpringNuts不锈钢法兰螺母StainlessSteelFlangeNuts不锈钢六角轮缘尼龙螺母StainlessSteelFlangeNylonInsertLockNuts 不锈钢六角重型螺母StainlessSteelHeavyHexNuts不锈钢六角螺母StainlessSteelHexNuts不锈钢尼龙嵌入螺母StainlessSteelNylonInsertLockNuts普通六角螺母HexNuts六角重型螺母HeavyHexNuts薄型螺母HexJamNuts尼龙嵌入防松螺母NylonInsertLockNuts尼龙锁紧螺母NylonCageNuts机械螺丝用六角螺母HexMachineScrewNuts米制六角开槽螺母MetricSlottedHexNuts轨道螺栓用方螺母TrackBoltNuts米制六角金属锁紧螺母PrevallingTorqueHexagonNuts开槽螺母SlottedRoundNuts六角开槽薄螺母HexagonSlottedThinNuts?五、螺柱Studs?压铆螺柱Self-ClinchingStuds铜螺柱BrassStuds焊接螺柱WeldStuds双头螺柱DoubleEndStuds六角螺柱HexStuds支撑卡柱Self-ClinchingStandoffs?六、垫圈Washers弹簧垫圈SpringWashers/SpringLockWashers宽型弹簧垫圈Extra-dutyHelicalSpringLockWashers杯型垫圈Cupwashers波形垫圈WaveWashers内齿垫圈InternalToothWashers外齿垫圈ExternalToothWashers铜垫圈CopperWashers方垫圈SquareWashers密封垫圈SealingWashers碟形弹簧垫圈DiscSpringWashers外舌止动垫圈ExternalTabWashers高强度垫圈Highstrengthenwashers橡胶垫圈RubberWashers锁紧垫圈LockWashers平垫圈PlainWashers鞍型弹性垫圈CurvedSpringWashers锯齿锁紧弹性垫圈Toothedlockwashers外锯齿锁紧垫圈SerratedLockWashers锥形垫圈TaperWashers重型弹簧垫圈HeavySpringLockWashers尼龙垫圈NylonWashers淬硬钢垫圈HardenedSteelWashers?七、铆钉Rivets?平头铆钉FlatHeadRivets击芯铆钉DriveRivets彩色铆钉ColoredRivets沉头铆钉CountersunkHeadRivets半沉头铆钉OvalCountersunkHeadRivets平锥头铆钉ConeHeadRivets抽芯铆钉BlindRivets开口铆钉SplitRivets开口型抽芯铆钉OpenEndBlindRivets拉铆钉PopRivets封闭铆钉ClosedEndRivets封闭性抽芯铆钉SealedTypeBlindRivets塑料铆钉PlasticRivets空心铆钉TubularRivets环槽铆钉RingGrooveRivets单鼓型铆钉Single-GripRivets圆头铆钉RoundHeadRivets高沉头铆钉CountersunkHeadRivets铝铆钉AluminumRivets实心铆钉SolidRivets沉头实心铆钉CountersunkHeadSolidRivets灯笼铆钉LanternBlindRivets半空心铆钉Semi-TubularRivets圆头半空心铆钉Semi-tubularPanHeadRivets异型铆钉SpecialRivets不锈钢铆钉StainlessSteelRivets双鼓型铆钉Multi-gripRivets高强度铆钉HighStrengthRivets台阶铆钉StepRivets面板铆钉TabletRivets开花型抽芯铆钉FloweringBlindRivets拉花型抽芯铆钉PeelTypeBlindRivets沟槽型抽芯铆钉GroovedTypeBlindRivet铆接工具RivetingTool?八、壁虎（膨胀螺栓）Anchors/ExpansionBolts化学锚栓ChemicalAnchors打入式壁虎HammerDriveAnchors内迫壁虎DropinAnchors重型壁虎HeavyDutyAnchors锤钉壁虎HitAnchors中空壁虎HollowWallAnchors套管壁虎SleeveAnchors插片壁虎CeilingAnchors门窗、地板专用壁虎NylonFrameAnchorsorMetalframeAnchors电梯壁虎BoltAnchors车修壁虎WedgeAnchors鱼眼壁虎TieWireAnchors外迫壁虎CutAnchors塑料膨胀PlasticAnchors不锈钢重载胀栓HeavyDutyExpansionAnchors象脚壁虎ElephantFootAnchors长型兰花夹ShortStrapAnchors?九、销Pins?开口销SplitPins圆锥销TaperPins锁销LockPins销轴ClevisPinswithhead槽销GroovedPins弹性销SpringPins圆柱销ParallelPins弹性圆柱销SlottedSpringPins带孔销Pinswithsplitpinhole?十、挡圈Circlips/Rings?开口挡圈Erings孔用挡圈Circlipsforholes轴用钢丝挡圈RoundwireSnapRingsforshaft 轴肩挡圈Ringsforshoulder夹紧挡圈GripRings轴用卡簧Circlipsforshafts带齿轴用挡圈RetainingRingswithLugsforshafts 钢丝锁圈RoundwireCirclips锥形锁紧挡圈LockRingswithconepins?十一、其他Others?牙条ThreadedRod冲压件Stampings平键ParallelKeys半圆键WoodruffKeys扳手Spanners钢丝螺套WireThreadInsert自动车床车削件CNCTurningParts齿轮Gears模具Molds线材盘元Ironorsteelwirerod铰链Hinge表面处理SurfaceTreatment。
紧固件中英文对照
Description in Chinese 英文品名Desciption in English圆锥销Taper pins圆柱销Parallel pins开槽圆柱头螺钉Slotted cheese head screws开槽盘头螺钉Slotted pan head screws单耳止动垫圈Tab washers开口销Split cooter pins开槽半沉头木螺钉Slotted raised csk head wood screws 开槽半圆头木螺钉Slotted round head wood screws开槽沉头木螺钉Slotted countersunk head wood screws 平垫Plain washers平垫（带倒角）Mediun washers平垫Plain washers重型弹垫Spring lock washers,tang ends标准弹垫Spring lock washers,square ends鞍形弹垫Single coil spring lock washers弹簧止动垫圈Curved spring washers波形弹垫Wave spring washersT型方颈螺栓T-head blots with square neckT型双接头螺栓T-head bolts with double nip螺纹圆锥销Taper pins with threaded endT型头螺栓T-head bolts蝶型螺母（美制）Wing nuts America form蝶型螺母（德制）Wing nuts germany form蝶型螺母（美制）Wing screws America form蝶型螺母（德制）Wing screws germany form圆球型盖型螺母Ball knobs开槽带孔球面圆柱头蚴钉Slotted capstan screws开槽长圆柱端紧定螺钉Slotted set srews with full dog point开槽平端紧定螺钉（半牙）Slotted set srews with chamfered end 小六角特薄细牙螺母Pip nuts with thread外舌止动垫圈External tap小垫圈(用于圆柱头螺钉) Washers for cheese head screws方斜垫圈（U型）Square taper washers forU-section方斜垫圈（I型）Square taper washers forI-sections方垫圈Square washers开槽凹端紧定螺钉Slotted set with cup point六角薄螺母Hexagon thin nuts细牙六角薄螺母Hexagon thin nuts木螺钉专用垫圈Rounds washers for wood constructions密封帽Sealing caps,push-in type活节螺栓B型Eye bolts form B内舌止动垫圈Internal tab washers双耳止动垫圈Washers with two taps滚花高头螺钉Knurled thumb screws with collar开槽滚花高头螺钉Slotted knurled thumb screws with collar 滚花高螺母Knurled thumb nuts with collar滚花薄螺母Knurled thumb thin nuts锁紧垫圈Sealing washers轴用弹性垫圈Retaining rings for shafts(external),circlips孔用弹性垫圈Retaining rings for bores(internal),circlips方头带垫螺栓Square head bolts with collar方头圆柱底端螺栓Square head bolts with half dog point方头带垫关圆底端螺栓Square head bolts with collar,half dog pointT型槽螺母T-slot nuts单头螺柱Single end studs地脚螺栓Masonry bolts带槽圆螺母Slotted round nuts端面带孔圆螺母Round nuts with drilled holes in one face 开槽平端紧定螺钉Slotted set screws with flat point开槽锥端紧定螺钉Slotted set screws with cone point六角螺母Hexagon nuts方螺母-C Square nuts六角头螺钉Hexagon screws六角头圆柱端紧定螺钉Hexagon set screws with full dog point薄型方螺母-B Square nuts without bevel(pressed nuts)六角头木螺钉Hexgon head wood screw(coach screws)吊环螺钉Lifting eye bolts吊环螺母Lifting eye nuts圆锥型槽销Grooved pins,taper grooved圆锥型槽销（半槽）Grooved pins,taper grooved half length平行槽销（带倒角）Grooved pins,parallel grooved full length前端凹槽槽销Grooved pins,reverve grooved half length中部凹槽槽销Grooved pins,center grooved圆头槽销Grooved pins with round head沉头槽销Grooved pins with countersunk head六角螺母棒Turnuckles(center parts),made out of hexagon bar花蓝螺栓Turnuckles with eye bolt and hook bolt弹性圆柱销Spring pins,heavy type组合式盖型螺母Hexagon domed cap nuts开槽圆螺母(配合沟头扳手) Slotted round nuts for hook spammer圆螺母（带插销孔）Round nuts with set holes盘型弹簧垫圈Disc springs喉箍Hose clamps润滑油嘴（旋扭头）Lubricating nipples,button head管夹Shackles for conduiltsU型螺栓Stirrup bolts(U-bolts)球面垫圈Spherical washers,conical seats圆柱销Parallel pins厚六角螺母Hexagon nuts,1.5d厚六角法兰面螺母Hexagon nuts,1.5d with collar长六角螺母Hexagon nuts,3d外齿锁紧垫圈External teeth lock washers内齿锁紧垫圈Internal teeth lock washers外锯齿锁紧垫圈External teeth serrated lock washers内锯齿锁紧垫圈Internal teeth serrated lock washers开口挡圈Retaining rings for shafts(E-rings),circlips平键（A型）Parallel keys(form A)半圆键Woodruff keys嵌环（支撑环）Thimbles机器螺钉和垫圈组合件Screws and washers assemblies自攻螺钉和垫圈组合件Tapping screws and washer assemblies薄型带孔内六角圆柱螺钉Hexagon cocket head cap screws with hole,low head大六角头螺栓Hexagon head bolts with large head(friction grip nolts)大六角螺母Hexagon nuts with large wideth across flat(friction grip nuts)大垫圈Round washers for friction grip bolts楔型方垫圈Spuare taper washers for friction grip bolts on T-六角法兰面螺母Hexagon flange nuts全金属六角锁紧螺母（2型）Prevailing torque type hexagon nuts,all metallic nuts 轻型弹性圆柱销Spring pins,light type重型弹性圆柱销用垫圈Washers for bolts with heavy type spring pinssISO公制螺纹螺钉（多种头型）Thread forming screws for ISO-metric thread 自攻自钻螺钉（多种头型）Self-drilling tapping screws开槽切削螺纹螺钉（多种头型）Thread cutting screws十字槽切削螺纹螺钉（多种头型）Thread cutting screws cross recessT型四爪螺母Tee nuts with pronge钢结构用六角头螺栓连接副Hexagon head fitted bolts for steel structures开槽盘头自攻螺钉Pan head tapping screws with slot开槽沉头自攻螺钉countersunk flat head tapping screws with slot开槽半沉头自攻螺钉Raised sountersunk oval head tapping screws with slot六角头自攻螺钉Hexagon tapping screws圆柱头螺钉用弹簧垫圈Spring lock washers for screws with cylindrical heads十字槽盘头自攻螺攻Pan head tapping screws with cross recessed十字槽沉头自攻螺攻Countersunk flat head tapping screws with cross recessed十字槽半沉头自攻螺攻Raised countersunk oval head tapping screws with cross薄型内六角圆柱头螺钉Hexagon socket head cap screws with,reduced head十字槽盘头螺钉Pan head screws with cross recessed钢结构用垫圈Washers for steel structures钢结构用六角头螺栓Hexagon head bolts for steel structures内六角沉头螺钉Hexagon socket coutersunk head screws轴用钢丝挡圈Roundwire snap rings for shafts十字槽半沉头木螺钉Cross recessed raised countersunk head wood screws十字槽圆头木螺钉Cross recessed round head wood screws十字槽沉头木螺钉Cross recessed countersunk head wood screws螺纹护套(普通、自锁等) Ciol inserts,coarse,fine thread,silf locking大外径垫圈Washers,outside diameter appro.3d弹簧卡子sping cotter for a bolt平板螺栓Belting bolts(elevator bolts)干壁钉（墙板钉）Dry wall screws环型螺母Lifting nuts(eye nuts)圆螺母用止退垫圈Tab washer for slotted round nuts。
紧固件专用词中英图文对照常用标准件常用英文单词及简写形式紧固件标准对照表
英文英文简写中文头部形状(Head style)Pan Head Pan HD 盘头Flat Head Flat HD 平头或countersunk Head CS HD 沉头Round Head RD HD圆头Oval Head OL HD半沉头Pan washer Head Pan wash HD垫圈盘头Socket Hd Skt HD六角圆柱头Hexagon cap Head Hex Cap HD外六角头Square shouder Head SQ SDR HD方肩头Cheese Head Ches HD圆锥头Wing Head Wing HD带翼头穴型状(Driver style)Philips cross recessed Phil十字Pozidriv cross recessed Pozi米字Torx Torx内梅花6-lobular6-lobuSocket Skt内六角Slot Slt一字槽示意图紧固件专用词中英文对照表面处理(Coating)Znic blue ZB兰锌Zinc black ZBK黑锌Zinc yellow(Zinc Oliver)ZY (ZO)/ZC黄锌/五彩锌Zinc white/Zinc Clear ZW/ZI白锌Black Anodize BL氧化黑色Natural Anodize NA氧化黑色Gold Anodize GD氧化金色Copper Red RU镀红铜Copper Yellow YU镀黄铜Nickel Over Copper CN镀铜底镍Tin Matt DT镀哑锡Flash Black Painting Coating PC镀哑锡Sn/Pb Plating TP镀锡铅合金Sandblast and Anodize SA喷沙阳极Nickel Flash NI镀亮镍Nickel Electroless EN无电解镍Chrome Flash CR镀亮铬Tin Flash ET镀亮锡Gold Plating AU镀金Titanium Plating TI镀钛Cadmium Plating CD镀镉Zinc-Iron Alloy ZF镀镉Chromate CH铬酸盐Electro Painting EF电泳漆Silver Plating Sil Plat/SLVR-PLT/AG镀银Nickel Plating Nic Plat镀镍Black Oxide BO黑氧化Dacromet Dacr达克罗Heat dip zinc HDZinc热浸锌通用缩写Socket Head Cap Screw Scr Cap Skt HD圆柱头内六角螺钉（Universal Abbrev）Passivation PSVT/PS钝化Hexagonal Socket Hex Skt内六角With locking Element W/LKG LMNT自锁/耐落Stainless Steel SST不锈钢大致形状(Rough Style)Split Lock Washer WSHR LKG SPLIT锁紧垫圈Wave Washer WSHR WAVE波形垫圈Flat Washer WSHR FLAT平垫圈Pan Head Machine Screw SCR MACH PAN HD盘头机器螺钉Phillips Screw PHIL SCR十字槽头螺钉Socket Set Screw S.S.S止付螺丝Full Hexagonal Nut NUT HEX FULL 六角全高螺母Hexagonal Jam Nut NUT HEX JAM锁紧螺母Socket Head Cap Screw S.H.C.S内六角圆柱头螺钉Hex Head Cap Screw H.H.C.S外六角螺栓NUT KEPS KEPS NUT K型螺母Hexagon Head Bolt BOLT HEX HD 六角标准螺栓(全螺纹半螺纹视情况而定)。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
英文英文简写中文
头部形状(Head style)
Pan Head Pan HD 盘头
Flat Head Flat HD 平头
或
countersunk Head CS HD 沉头
Round Head RD HD圆头
Oval Head OL HD半沉头
Pan washer Head Pan wash HD垫圈盘头
Socket Hd Skt HD六角圆柱头
Hexagon cap Head Hex Cap HD外六角头
Square shouder Head SQ SDR HD方肩头
Cheese Head Ches HD圆锥头
Wing Head Wing HD带翼头穴型状(Driver style)
Philips cross recessed Phil十字
Pozidriv cross recessed Pozi米字
Torx Torx
内梅花
6-lobular6-lobu
Socket Skt内六角
Slot Slt一字槽示意图
紧固件专用词中英文对照
螺丝(Screw)
表面处理(Coating)Znic blue ZB兰锌
Zinc black ZBK黑锌
Zinc yellow(Zinc Oliver)ZY (ZO)/ZC黄锌/五彩锌
Zinc white/Zinc Clear ZW/ZI白锌
Black Anodize BL氧化黑色
Natural Anodize NA氧化黑色
Gold Anodize GD氧化金色
Copper Red RU镀红铜
Copper Yellow YU镀黄铜
Nickel Over Copper CN镀铜底镍
Tin Matt DT镀哑锡
Flash Black Painting Coating PC镀哑锡
Sn/Pb Plating TP镀锡铅合金
Sandblast and Anodize SA喷沙阳极
Nickel Flash NI镀亮镍
Nickel Electroless EN无电解镍
Chrome Flash CR镀亮铬
Tin Flash ET镀亮锡
Gold Plating AU镀金
Titanium Plating TI镀钛
Cadmium Plating CD镀镉
Zinc-Iron Alloy ZF镀镉
Chromate CH铬酸盐
Electro Painting EF电泳漆
Silver Plating Sil Plat/SLVR-PLT/AG镀银
Nickel Plating Nic Plat镀镍
Black Oxide BO黑氧化
Dacromet Dacr达克罗
Heat dip zinc HDZinc热浸锌通用缩写Socket Head Cap Screw Scr Cap Skt HD圆柱头内六角螺钉（Universal Abbrev）Passivation PSVT/PS钝化
Hexagonal Socket Hex Skt内六角
With locking Element W/LKG LMNT自锁/耐落
Stainless Steel SST不锈钢
大致形状(Rough Style)
Split Lock Washer WSHR LKG SPLIT 锁紧垫圈
Wave Washer WSHR WAVE 波形垫圈
Flat Washer WSHR FLAT平垫圈
Pan Head Machine Screw SCR MACH PAN HD盘头机器螺钉
Phillips Screw PHIL SCR十字槽头螺钉
Socket Set Screw S.S.S止付螺丝
Full Hexagonal Nut NUT HEX FULL六角全高螺母
Hexagonal Jam Nut NUT HEX JAM锁紧螺母
Socket Head Cap Screw S.H.C.S内六角圆柱头螺钉
Hex Head Cap Screw H.H.C.S外六角螺栓
NUT KEPS KEPS NUT K型螺母
Hexagon Head Bolt BOLT HEX HD 注：以上信息由Sha收集并整理。
E-mail:sourcing-king@ 六角标准螺栓(全螺纹半螺纹视情况而
定)。