技术报告样本英文版

Report onTHE VIDEO ALERT AND CONTROL DASHBOARD SYSTEMWritten by:BO LIJune 6, 2006TABLE OF CONTENTSI. INTRODUCTION . . . . . . . . . . . . . . . . . . 1II. DESCRIPTION AND FUNCTION OF COMPONENTS . . . . . . 2Infrared Detector . . . . . . . . . . . . . . . . 2 Radar Sender and Receiver . . . . . . . . . . . . 3 X-ray Sender and Receiver . . . . . . . . . . . . 4 On-Board Computer . . . . . . . . . . . . . . . . 5 Map Discs . . . . . . . . . . . . . . . . 5 Receptions from the Detectors . . . . . . . . 5 Video Screen . . . . . . . . . . . . . . . . . . 6 Keyboard . . . . . . . . . . . . . . . . . . . . 7 Car Positioning . . . . . . . . . . . . . . . 7 Intersection Statements . . . . . . . . . . . 8 Brake Applicator . . . . . . . . . . . . . . . . 8III. OPERATING CYCLE OF THE VAC SYSTEM . . . . . . . . 9IV. ECONOMIC FEASIBILITY OF THE VAC SYSTEM . . . . . . 11V. ADVANTAGES OF THE VAC SYSTEM . . . . . . . . . . 12VI. CONCLUSION . . . . . . . . . . . . . . . . . . . 13List of References . . . . . . . . . . . . . . . 14LIST OF FIGURESFigure Page1. Component Placement in Car . . . . . . . . . . . 22. Detection Range . . . . . . . . . . . . . . . . 33. Mounting of Detection Units . . . . . . . . . . . 44. Components Mounted on Dash . . . . . . . . . . . 65. Graphic Projection on Video Screen . . . . . . . 66. Keyboard . . . . . . . . . . . . . . . . . . . 77. Coordinate Projection on Video Screen . . . . . . 7LIST OF TABLESTable Page 1. U. S. Auto Accidents, Injuries, Deaths by Year. . 12KEYWORDSReport onVIDEO ALERT AND CONTROL DASHBOARD SYSTEMI. INTRODUCTIONAutomobile safety is becoming one of the major concerns of auto manufacturers today. The engineers in this industry have saved many lives by developing injury-protecting devices, such as strengthened metal parts and inflatable pillows to cushion against physical injury, but have not developed anything to prevent accidents by foreseeing and avoiding them [5] . For this reason, the Video Alert and Control (VAC) dashboard system has been developed by M&M Enterprises. This system has the ability to "visualize" the road ahead and its dangers and to display this information graphically to the driver on a video screen on the dashboard. Thus, the driver has a view of dangerous objects in or near the road ahead and has time to slow down to avoid them. The purpose of this report is to inform product-planning executives at XYZ Corporation of the basic functions and operation of the VAC dashboard system and to explore the advantages it offers in terms of saving human lives and automobile damage.This report does not provide design or manufacturing detail and is intended only to provide executives basic information with which to assess the feasibility of installing these systems in XYZ cars.II. DESCRIPTION AND FUNCTION OF COMPONENTSThe main units of the system are three information gathering devices mounted on the front of the car, a computer which analyzes the incoming information, and a video screen in the dash which graphically shows a bird's-eye view of the road ahead with any upcoming danger plotted as a dot on the screen. In all, the seven components which work together to give the driver a complete knowledge of the unseen road ahead are (1) the infrared detector, (2) the radar sender and receiver, (3) the x-ray sender and receiver, (4) the computer, (5) the video screen, (6) the keyboard, and (7) the brake applicator. See Figure 1.Figure 1. Component Placement in CarInfrared DetectorThe infrared detector is the key detecting device in that it is constantly searching for warm objects in or near the path ahead of the car. Locating these objects is necessary because in many areas of the United States, loose wildlife is a major cause of nighttime and some daytime accidents. Therefore, the infrared detector "sees" the2upcoming trouble (before the driver) by sensing its warm-bloodedness and then alerts the driver. The detector will sense the warmth of any warm-blooded animal larger than a rabbit, which includes deer and cattle--the two main causes of wildlife-related accidents.Equally important is the fact that other cars on the road give off detectable heat. By detecting these other cars, the driver is informed of upcoming traffic, a recent accident blocking the road ahead, or a stalled car, if some heat is still present in that car [6].The driver is informed graphically by the video screen in his car, and to differentiate the wildlife from another car, the x-ray unit is used to check for metal in the detected object. So, if a warm object is detected with metal in it, the computer reads it as a car and shows it on the screen as a yellow dot. Contrastingly, if no metal is detected in the warm object, an animal is assumed and plotted as a red dot.Radar Sender and Receiver In order to find the exact location of the detected trouble, a radar sender and receiver is used. It is one of the three detecting devices mounted on the front of the car which constantly scans the road ahead for trouble. If the infrared detector detects heat from an upcoming object, the radar sender is activated immediately and radar waves are sent to the object. When the waves bounce off, they return to a parabolic mirror which contains the radar receiver. Here, the object's distance and position are calculated by the computer from the time of wave travel, and coordinates are found and plotted on the screen as a dot. This entire process takes less than 1/10th of a second once the heat is detected [1] . See Figure 2 for the detection range of the detecting devices.Figure 2. Detection Range3X-Ray Sender and ReceiverThe x-ray sender, used to detect metal in the upcoming object, is activated simultaneously with the radar sender. Working similarly to the radar, the x-rays are sent out and bounced back if metal is present. If no metal is present the wave is not returned to the receiver and the computer reads the information as an animal since nearly anything which is warm and does not contain metal is usually an animal. So, the instant at which heat is detected, the radar and x-ray senders are activated to acquire position and metal content knowledge of the object.The three units mounted on the front of the car are the parabolic mirror (which contains the infrared, radar, and x-ray receivers), the radar sender, and the x-ray sender. These units are shown in mounted position in Figure 3. The units rotate in unison through a 90 degree angle every 1/2 second. This rotation gives a detection range of 150 yards in front of the car and 105 yards on each side. See Figure 2. They are also enclosed in a plexiglass box for protection from stones and insects. (The plexiglass is a very high grade so that refraction of the detecting waves is minimal.)Figure 3. Mounting of Detection Units4On-Board ComputerThe computer is mounted under the dash and preprogrammed to read and analyze two things: (1) the map discs and (2) the receptions from the detectors.Map Discs. There are three map discs each of which contains a section of the United States' highways and roads. The computer reads the discs and projects a bird's-eye view of the road the driver is on onto the video screen. (The driver determines the road by plotting coordinates on the keyboard as will be discussed later in the report.) As the car travels down the road, the map flows along respectively to the car. The graphic projection is very similar to the popular road-race video games. The car appears at the bottom of the screen as a blue dot. Since the computer knows when an intersection in the road is approaching, it notifies the driver by a statement at the top of the screen. The driver then pushes a certain button to let the computer know if he wants to turn at the intersection, and if so, in which direction. The map then follows that direction on the new road or stays on the same one, whichever was indicated.Receptions from the detectors. The receptions, as mentioned earlier, are analyzed by the computer to give the exact location of the object in reference to the car, and to determine what the object is. To calculate the location, the computer uses a trigonometric method from which initial information is supplied by the radar waves. To determine what the object is, the computer analyzes information from the infrared and x-ray detectors. As has been said, if heat5and metal are both detected inthe same object, the computer analyzes it as another car and produces a yellow dot on the screen. But if only heat is detected, an animal is assumed and a red dot appears.Video ScreenThe video screen is the component mounted on the face of the dashboard. As shown in Figure 4, it is in easy view of the driver just to the right of the steering wheel. Its graphic projection is very similar looking to that of a video game screen. Its functions are to display the flowing map and to show the driver exactly where any trouble is ahead so he can make adjustments in speed. An example of the graphic projection is shown in Figure 5.Figure 4. Components Mounted on DashFigure 5. Graphic Projection on Video Screen6KeyboardThe keyboard, which is mounted next to the video screen on the dash, is a collection of 19 keys which transfers commands from the driver to the computer. See Figure 6. The keyboard's two basic functions are to (1) position the car (blue dot) at the exact location of the actual car and (2) respond to the upcoming intersection statements.Figure 6. KeyboardPositioning Car. When a disc is inserted into the slot above the keyboard, a map of the chosen section of the country appears with coordinates on the video screen. The numbers and letters which correspond to these coordinates are punched in the keyboard so that the screen will zoom in on a smaller area. See Figure 7. The driver keeps zooming to a smaller area until the exact area where his car sits appears. (This process is done by pushing the "number/letter" key then the "zoom" key.) Next, one of the four direction keys are pushed to tell the computer which direction the car will be traveling. Then the " " key is used to position the blue dot even more exactly. The "start" key is the last key in the positioning process and is to be pushed immediately before the car starts in motion.Figure 7. Coordinate Projection on Video Screen7Intersection Statements. When an intersection approaches, the computer will need to know if the map should follow another road. Therefore, when the intersection is about 250 yards in front of the car, the top of the video screen reads: HIGHWAY 260 AHEAD The statement stays on the screen for 10 seconds and if the driver does not want to turn he pushes no keys. But if he wants to go west on 260, he pushes the "w" direction key. The computer then follows Highway 260 West instead of the previous road.Brake ApplicatorThe brake applicator is the only automated control device of the car's safety system. It is wired to the computer which tells it if the infrared detector has detected something not moving and directly in front of the car. This could be, for example, a recent car wreck or a deer in the car's lane. If an object is detected in this area, the brake applicator slowly starts applying the brake in case the driver's reflexes are not quick enough. The applicator will not stop the car completely, but will apply the brake for five seconds. If the object is not directly in front of the car, the brake is not applied automatically. This device is used simply because it is very likely that the car will collide with the object if not slowed immediately.III. OPERATING CYCLE OF THE VAC SYSTEMThe normal operating cycle of the VAC dash is described by the following steps and procedures:1.Insert the map disc in the slot, and press the ON key to turn unit on. A map ofsection of U. S. with coordinates will display.2.Enter number coordinates by pressing the number corresponding to the map.Enter letter coordinates by pressing the SHIFT key and then appropriate letters.3.Press the ZOOM key to enlarge the chosen area.4.Repeat the preceding steps until the exact location is reached.5.Press one of the direction keys to indicate direction of travel. Press " " key ifnecessary to further position blue dot.6.Press "start" key, and begin driving the car. As the car moves, a continuous mapgoes by the screen.97.As the driver proceeds:o If a red dot (an animal) appears on the screen, a beep is sounded and the driver should notice the location of the trouble and make adjustment inspeed.o If a yellow dot (another car) appears on the screen, no beep is sounded, but the driver should still notice its location.o If either the yellow or red dot is stationary in the driver's lane ahead, the brake will automatically be applied.o If an intersection approaches, a notice will be displayed at the top of the screen. The driver should do one of two things:▪Press the direction button desired if he will be turning.▪Press the NO button if he does not choose to turn.These steps will be repeated by the system whenever necessary throughout thetraveling process until the unit is turned off.10IV. ECONOMIC FEASIBILITY OF THE VAC SYSTEMThe prototype of the VAC dash system was completed in March, 1983, and its final cost was $3,050. This price is definitely unfeasible to add on to the already high price of a car. Therefore, the key to the economic feasibility of the system is to mass produce this system. One of the main causes for the expensive prototype was the programming of more than four million miles of roads and highways [7] onto the three computer discs. But, not that the prototype discs have been made, the following ones can be mass produced off of these intial ones at a much lower price. Also, now that the program in the computer itself has been written, it will be much cheaper to duplicate. The projected price of the entire system installed into a new car while being mass produced is $1,200 to $1,300. These prices may still sound slightly expensive, but the lives and cars that this system will save will be well worth the cost.11V. ADVANTAGES OF THE VAC SYSTEMEach year the number of auto accidents increases by the thousands. See Table 1. This continual increase is the factor which spurred the development of the VAC dash system. Obviously, not all accidents can be avoided by installing a VAC dash in every American's car, but a percentage of the accidents is sure to be decreased.Most auto deaths are caused by severe accidents in small cars. A government report states that "annual fatalities in the United States are expected to increase by 10,000 by 1990 due solely to changes in the size and weight of vehicles on the road . . . fatalities in smaller cars will increase at a rapid rate while large car fatalities will decline" [5] . These small cars are much lighter than large cars and are much more dangerous. But, with the high gasoline prices today, drivers prefer to drive these economical cars. Because the continual use of these small cars, M&M Enterprises has made it equally as easy to incorporate the VAC dash system into any size of car. Also, the system functions equally as well and is no more expensive than if it were installed in a large car.12VI. CONCLUSIONDetection of unseen trouble is not new to all transportation methods. For example, some airports use a very efficient system similar to the VAC system for aircraft collision avoidance. The main difference is that the radar sits in the control tower (not the airplane itself) so the air traffic controller has a better view of where the incoming planes are in reference to one another. He can then radio this information to the pilots [2] . Radar is also very commonly used in ocean-going vessels. On small ships, radars can detect danger such as rough water, whereas on a larger ones, they detect things as large as mountain ranges and icebergs many miles away [4] . With these two modes of transportation highly advanced in their collision avoidance systems, it seems only reasonable to have the United States' major transportation device, the car, created just as safe by utilizing the Video Alert and Control dash system.ACKNOWLEDGEMENTSLIST OF REFERENCES1.Callard, Jack. "How Radars Work" in Man and Machines. London: Plenum, 19812.FAA Research and Development Authorization (Federal Aviation AdministrationPublication #H701-51). Washington, DC: U. S. Government Printing Office, 1982.3.Nicole, Anne. "Computerized Tomography." McGraw-Hill Encyclopedia ofScience and Technology. 5th ed. New York.4."Radars." Motor Boating and Sailing. October 1980. 88-89.5.Small Car Safety: An Issue That Needs Further Evaluation. (U. S. Department ofTransportation Publication #26113-50). Washington, DC: U. S. GovernmentPrinting Office, 1982.6.Sutton, Caroline. "How a Heat Sensor Works." How Do They Do That? NewYork: McGraw-Hill, 1981.7.U. S. Bureau of the Census. Statistical Abstract of the United States. Washington:GPO: 1983.APPENDICIES14。