《火炬之光2》100%处决 高攻高速高暴击肉搏狂战

合集下载

Falcon-Eye-Brochure-June-2015

Falcon-Eye-Brochure-June-2015

KC-1000KC-1100 MK2KC-2000The same scenes shot with the Falcon Eye camera, a consumer HandyCam video camera, and a professional Generation III Night Vision camera.See the videos at: EASY IDENTIFICATIONHigh resolution in clear colors and progressive scanning technologygives outstanding target recognition and identification capability.ENVIRONMENT RESEARCHDocumentation and research of the nature and environment is no longer limited by availability of light. With the Falcon Eye camera scientists have a tool to enhance our knowledge and to increase the protection of the environment.LAW ENFORCEMENTSExcellent recognition performance and tamper proof data makes the Falcon Eye system ideal for monitoring of crime scenes and recording as evidence.NATUREOutdoor recording of wildlife at night in HD color can now docu-ment and entertain us in ways we have never seen before.NEWS & DOCUMENTATIONBroadcast companies, TV stations, newspapers, and magazines can report in HD full color videos and still images of events and disasters happening around the clock.Operations are needednight and day all year round. The Falcon Eye camera is designed to be effective regardless of weather orlighting conditions, and gives the maximum support to rescue teams in their effort“Defog mode” not activated.FALCON EYE KC-2000 CAMERAPLEASANT FOR THE EYEHigh resolution image (HD) with natural colors makes it pleasant for the eye also after long time use.DUAL FUNCTIONCaptures video and still images with simple two button operation.USE AS EVIDENCEMovies and images can be used as evidence of crime scenes, as tamper-proof SD cards can be used (Write Once Read Many SD memory cards).AUTOMATICEasy to operate with most settings done automatical-ly. Video recording can be handled by persons without photographic background.FULL METAL JACKETBuild for operation in tough environments. Housing made of CNC-machined aluminum block. Weather proof.HANDHELD OPERATIONCompact, light weight and ex-cellent portability. Designed for handheld shooting. Small form factor for covert opera-tions. 5 hours continuous vid-eo recording using integratedbattery and recoding media.KCfog™ - proprietary technology for enhansed visibility in CS, interchanageable lens system (compatible with super long focal lenses with image magnifications such as 60X)Rapid, makes consecutive recording possible even with Electronic (EVF) 0.45” WVGA, with Diopter Adjustment Build in microphone - monaural with AGC. Optional Video recording time (32 GB SD Card) Approximate:HDMI compatible video recorder. Uncompressed video Approximately 5 hours consecutively recording time Handheld type for portability and easy operation with buttons for video recording, photo capture, menu opera-CNC machined aluminum block for extreme durability Auto Iris - DC, External mircophone 3.5mm stereo mini-jack with AGC, Power supply, Head phones 3.5mm stereo mini-jack, HDMI (Type A) out, Tripod screw 1/4”-20 UNC, 108 (W) x 98.3 (H) x 206.7 (L) mm (Lens not included)Accessories –included with camera Optional accessories –(not included with camera):Computar M6Z1212-3S lensCertified by Falcon EyeIris Range: F1.2 ~ F16C Focal Length: 12.5-75mm (6x)Focusing range: 1 m - ∞Format: 2/3”Iris Control: Manual Focus Control: Manual Zoom Control: Manual Size: 59.5 × 114.5 mm Mount: C-mount Weight: 483 gTemperature range: -20 C° - +50 C°Fujinon D60x16.7SR4DE-V21 lens2 MP. 60 x zoom. Motorized zoom and focus. 2 x Extender.Focal Length (mm): 1×: 16.7 – 1000 2×: 33.4 – 2000Iris Range: 1×: F3.5 – F16 2×: F7.0 – F32Format: 1/1.8″ (will show slight corner crop -ping with Falcon Eye cameras)Iris: Auto(DC type) or Remote Zoom: Motor drive Focus: Motor Drive Size: 137 x 154 x 377 mm Focus Range: 5m to infinity Mount: C Weight (kg): 6.4Standard Accessories: Iris control cableKowa LMZ69M Macro Zoom lensIris Range: F1.4 ~ Close, Focal Length: 11.5 mm ~ 69 mm (6x)Focusing range: 0.01 m - ∞Format: 2/3”Iris Control: Manual Focus Control: Manual Zoom Control: Manual Size: 48 × 102.7 mm Mount: C-mount Weight: 300 g Temperature range: -10 C° - +45 C°Stereo Directional MicrophoneStereo Electret Condenser type (dual uni-directional).Frequency Response: 100-18,000Hz Sensitivity: -40dB @1kHz (1V/Pa)Output Impedance: 1.5 k ohm @ 1kHz Signal-to-Noise Ratio: 60dB (1kHz @ 1Pa)Dynamic Range: 66dB Power Supply: 1.5VDC (“AAA” size battery)Max. SPL: 100dB Battery Current Drain: 0.5mA Battery Life: 400 hours with Alkaline battery Weight w/o battery: 52g Dimensions: 177mm long – 18.2mm diameter Output cable: attached with 3.5mm plug Supplied Accessories: Camera hot-shoe mic holder,windscreenFalcon Eye KC-1000Camera Head UnitMinimum Subject Illumination: 0.005lx (F1.4, 1/30, +66 dB)Image Sensor: KClux™ - proprietary CMOS single plate sensor, 2/3” size Pixel size: 7.1μm (H) × 7.1μm (V)Resolution – total: Approx. 1.47 Mpixles. 1408 (H) × 1042 (V) pixels Resolution – effective: Approx. 1.33 Mpixles. 1288 (H) × 1032 (V) pixelsFilter: RGB Primary Color Filter (Bayer Array).Sensitivity: F16 2000lxS/N ratio: Over 50dB (Gamma =1, edge enhancement OFF) Spectral Sensitivity: 390-700 nmDynamic Range: 250%Video noise control: KCnoise™ - proprietary 2D/3D noise reductionFrame rate: 60 fps. ProgressiveSpectral Sensitivity: 390-700 nmCCU Port: J45 x 1 (screw lock)Lens mount: COverload response: Rapid, for recording with large change in ambient light Camera Control UnitVideo output format: HDMI x 1 HD-SDI (BNC) x 1, (VBS)(BNC) x 1Sync signal input: External sync input (VBS / bi-level) BNC×1USB: USB 2.0 x 1Serial port: RS-232C (D-Sub 9-pin male) x 1GPI (Contact type): 2 circuits (using unutilized serial port pins)LAN: RJ45 x 1 (10Base, 100Base-TX)IR remote receiver (optional): Front x 1, rear expansion port x 1Camera port: RJ45 x 1Video output format HDMI: 1920×1080/59.94p, 1920×1080/59.94i, 1920×1080/50p,1920×1080/50i, 1280×720/59.94p, 1280×720/50p Video output format 3G-HDSDI: 1920×1080/59.94p, 1920×1080/59.94i, 1920×1080/50p,1920×1080/50i, 1280×720/59.94p, 1280×720/50p Video output format Composite: NTSC, PAL down converted (letterboxed)Still photo format: (USB) JPEG (1280×1024)Fog Mode: KCfog™ - proprietary technology for enhansed visibility infoggy or smoky environmentsGeneral SpecificationsDC Input Voltage: DC12V ± 10%. Power consumption: 13W or less Operating temp. / humidity range: 0°C - 45°C / 35-90%Storage temp. / humidity range: -20°C - 60°C / 20 - 90%Dimensions Camera head: 46.0(W)×55.2(H)×51.9(D)mmDimensions camera control unit: 170.0(W)×47.0(H)×183.5(D)mmWeight camera head / control unit: 160g / 1100gDistance camera to control unit: Up to 100m (twisted pair cable) by using repeaters Other featuresQuality adjustment: Automatic / Shutter Priority / gain priority.Gain: AUTO / MANUAL (0~ 78.0dB)Shutter speed: 1/2, 1/4, 1/8, 1/15, 1/30, 1/60, 1/100, 1/125, 1/250, 1/500,1/1000, 1/2000, 1/4000, 1/10000Gamma correction: Variable 0.35 ~ 0.55, OFFKnee: Fixed / AutoWhite Clipping: Variable 100~109%WDR: OFF / ONDNR: OFF, LOW, MIDDLE, HIGHWhite Balance: ATW / AWC / MANUALR/B: Variable gain 0~1023Black Level: Variable -100~0~100Chroma Level: Variable 0~255Electronic zoom: x2Image inversion: Upside down, flip horizontal, vertical and horizontal inversion Picture freeze: Pause live videoScene file: Up to 5Test pattern: Color bars , gray scale , cross-line built-inOSD: Display operation for menu, message, time, the scene filenumbers, etc.Falcon Eye KC-1100 MK2Camera SpecificationsMinimum Subject Illumination: 0.005lx (F1.4, 1/30, +66 dB)Image Sensor: CMOS, 2/3” size, colorPixel size: 5.0μm (H) × 5.0μm (V)Resolution – total: Approx. 2.6 Mpixles. 2270 (H) × 1144 (V) pixelsResolution – effective: Approx. 2.2 Mpixles. 1974 (H) × 1100 (V) pixelsFilter: RGB Primary Color Filter (Bayer Array).Sensitivity: F11 2000lxHorizontal definition: Over 900TV linesSpectral Sensitivity: 390-700 nmDynamic Range: 250%S/N ratio: Over 50dB (Gamma =1, Detail mode OFF)Video noise control: KCnoise™ - proprietary 2D/3D noise reductionOverload response: Rapid, makes recording possible with largechange in ambient lightFrame rate: 60 fps. ProgressiveElectronic zoom: x1, x2, x3, x4, x5, x6, x7, x8, x9, x10Picture flip: Vertical flip, horizontal flip,vertical & horizontal flipTest patterns: Color bars, grayscale, crosslinesavailable internallyPrivacy mask: 8 masks GRAY/WHITE/BLACKOSD: Operation menu S/N RATIO Over 50dB(″ =1, edge enhancement OFF)Lens mount: CSLens control: 4-pin DC iris controlPicture Quality Control:Electronic sensitivity boost: OFF / AUTO (S/N, STD, MOVE) / MANUALx1, x2, x4, x6, x8 , x12, x16, x24, x32, x64Gain Auto: AGC / HYPER-AGC,Manual: LOW / MID / HIGHElectronics shutter: OFF, 1/50, 1/60, 1/100, 1/125, 1/250, 1/500,1/1,000, 1/2,000, 1/4,000, 1/10,000Backlight correction: 9×5 area selectGamma correction: 45 / 0.75 / 1DNR: Off, Low, HighWhite balance: ATW1 / ATW2 / AWC / manualWDR mode: OFF / WDR / AUTO KNEE / AUTO BLACKSTRETCHFog and smoke elimination: KCfog™ - proprietary technology for enhansedvisibility in foggy or smoky environmentsColor matrix: R/G/B/Ye/Cy/Mg 6-axis controlOther: Digital / Chroma / Black LevelInterface SpecificationsVideo output: HD-SDI (BNC) × 1Video output: Composite video (BNC) × 1Synchronization signal input terminal: External sync input (VBS / 2 level sync )BNC × 1Port: Serial RS-485GPI (Contact type): IR cut filter (switchable)Output format HD-SDI: 1080i/59.94, 1080p/29.97,720i/59.94, 720p/29.97,1080i/50, 1080p/25,720i/50, 720p/25Output format Composite video: NTSC, PAL downconverted(letter box / side cut / squeeze)General SpecificationsDC Input Voltage: DC12V ± 10% (ripple 50mVp-p or less)Power consumption: 7WOperating temp./ humidity range: 0°C - 50°C / 35-90%Storage temp. / humidity range: -20°C - 60°C / 20 - 90%Dimensions (Excluding protrusions): 78.0 (W) × 64.0 (H) × 139.0 (D) mmWeight: 650 gBROADCAST QUALITYHigh quality output in HD-SDI / HDMI /KC-1000KC-1100The Falcon Eye Camera LineupKC-1100。

克伊利·7002开关系统数据手册说明书

克伊利·7002开关系统数据手册说明书

1.888.KEITHLEY (U.S. only) SideTextSWITCHINGANDCONTROLA G R E A T E R M E A S U R E O F C O N F I D E N C ETen-slothighdensityswitchmainframe The Model 7002 Switch System is a 10-slot mainf rame that supports up to400 2-pole mul t i p lex e r channels or 400 matrix crosspoints. The front panelincludes a unique in t er a c t ive display of chan n el status for quick pro g ram-ming. Scanning speeds of up to 300 channels per second are possible withthe high density switch cards. The wide selection of more than 30 d ifferentswitch cards makes the 7002 one of the most flexible switch i ng main-frames avail a ble.Reduce the Size and Costof Your Switching Application.up to 400 channels of 2-pole switching. A single Model 7002 mainframecan accommodate up to ten 40-channel cards. That’s 400 channels in asingle full-rack package that is only 178mm high (7 in). This level of density provides some impor-tant advantages. First, it reduces the amount of switching hardware required for a given ap p li c a t ion. Second, it provides high flexibility. The high density cards can be used with the special signal cardsto cover all your signal needs for a large application with one m ainframe.The 7002 is fully compatible with all 7001 switch cards. From thisf ig u r a t ion flex i b il-a m p le, the outputs of a mul t ip lex e r card can be connectedt i p lex e r cards can be con n ect e d to formlex e r. Intercard wiring is eliminated by using the an a l og backplane to formThe interactive front panel display helps shorten the time requiredAn optional light pen provides point and click pro g ram m ing from thep lete switch patterns.Automatic card configuration. When the high density cards are installed,the 7002 au t o m at i c al l y configures each slot independently for the propercard. The channel status display on the front panel adjusts to show eachcard’s capacity and con f ig u r a t ion.Front panel info key. At the touch of a button, the operator receives con-text-sensitive, on-line information to help configure the system. This infor-mation is displayed on a 52-character alphanumeric display for clear andreadable messages. There is no need to refer constantly to the operator’smanual. All information messages, operating instructions, and prompts areavailable in English, German, and French. Just select the desired languagein the con f ig u r a t ion menu.Programmable channel closure restrictions. The 7002 allows specificchannels to be locked out from closure. This restriction can be conditionalbased on the open/close state of other channels or crosspoints. This capa-bility is useful to prevent certain signals from being accidentally connectedto high power circuits, for example.DC, RF, and optical switchcapabilityInteractive channel statusdisplaySERVICES AVAILABLE7002-3Y-EW 1-year factory warranty extended to 3 years from date of shipment19811.888.KEITHLEY (U.S. only)A G R E A T E R M E A S U R E O F C O N F I D EN CE7002 7002Switch/Control Mainframe400-channelSystem Throughput300 channel per second scanning. The 7002 can scan through up to 300 chan-nels per second. This scan process can be controlled by the internal time base of the 7002 or through external triggers. The scan sequence is con t rolled by what appears in the scan list. The scan list can include channels, ranges of channels, and memory locations. This ap p roach gives max i m um flexibility while obtaining maximum through p ut.Built-in Scan Control and trigger Link. The built-in scan control eliminates the need for the computer to control every step of the test pro-cedure. Simply program the 7002 to control the channel spacing, scan spacing, and number of scans. Trigger Link gives you access to six inde-pen d ent hardware trigger lines on a single cable.SYSTEMCAPACitY: 10 plug-in cards per mainframe.MeMoRY: Battery backed-up storage for 500 switch pat t erns. SWitCh SettLiNg tiMe: Automatically selected by the main-frame. For different switchcards, 7002 will be set to the slow-est relay settling time. Additional time from 0 to 99999.999s econds can be added in 1ms increments.tRiggeR SouRCeS:External Trigger (TTL-compatible, programmable edge, 600ns min i m um pulse, rear panel BNC).IEEE-488 bus (GET, *TRG)Trigger LinkTHROUGHPUTeXeCutioN SPeeD oF SCAN LiSt (channels or memory l ocationsper s econd):ChannelsMemoriesBreak-Before-MakeOFF 300243ON 270189tRiggeR eXeCutioN tiMe (maximum time from ac t i v a t ion of trig g er Source to start of switch open or close 2):Source Latency Jitter GET1 200 µs <15 µs *TRG2, 3 3.0 ms Trigger Link 200 µs <10 µs External200 µs<10 µs Timer <25 µsNOTES1. Excluding switch settling time.2. Assuming no IEEE-488 commands are pending execution.3. Display off.IEEE-488 COMMAND EXECUTION TIMECommand Execution Time 1CLOS (@1!1)<8 ms + Relay Settle Time NOTES1. Measured from the time at which the command terminator is taken from the bus to relay energize. With display OFF.IEEE-488 BUS IMPLEMENTATIONStANDARDS CoNFoRMANCe: Conforms to SCPI-1990, IEEE-488.2, and IEEE-488.1.MuLtiLiNe CoMMANDS: DCL, LLO, SDC, GET, GTL, UNT, UNL, SPE, SPD.uNiLiNe CoMMANDS: IFC, REN, EOI, SRQ, ATN.iNteRFACe FuNCtioNS: SH1, AH1, T5, TE0, L4, LE0, SR1, RL1, PP0, DC1, DT1, C0, E1.All aspects of 7002 op e r a t ion are available from the front panel or over the IEEE-bus interface. The 7002 conforms to IEEE-488.2 and the SCPI (Standard Com m ands for Programmable Instru m ents) command language protocol.• Scan List • Scan Spacing • Channel Spacing • Number of Scans • Number of Channels • Trigger Source• Single Channel Mode • Channel Restrictions • Save Mainframe Con f ig u r a t ion Setups • Digital I/O • Card Pair • Channel Delay • Number of Poles• Channel Pattern MemoryGENERALDiSPLAY: Dual-line vacuum fluorescent. 1st line: 20-char-ac t er alphanumeric. 2nd line: 32-character alphanu-meric. Chan n el status LED grid.Light PeN oPtioN: Provides interactive programming of channels, cross points, scan lists, and memory.ReAR PANeL CoNNeCtoRS: IEEE-488; 9-pin DB9 Female; 8-pin micro DIN for Trigger Link; 8-pin micro DIN for Trigger Link expansion; BNC for External Trigger; BNC for Channel ReadyPoWeR: 100V to 240Vrms, 50/60Hz, 110VA max i m um.eMC: Complies with European Union Directive 89/336/ EEC, EN61326-1.SAFetY: Conforms to European Union Directive 73/23/EEC, EN61010-1).eMi/RFi: Meets VDE 0871B and FCC Class B.eNViRoNMeNt: operating: 0°C to 50°C, <80% RH (0°C to 35°C). Storage: –25°C to +65°C.DiMeNSioNS, Weight: 178mm high × 438mm wide × 448mm deep (7 in × 171⁄4 in × 175⁄8 in). Net weight 9.1kg (20 lb).。

Lincoln Power TIG 275 焊接机说明书

Lincoln Power TIG 275 焊接机说明书

ProcessesStick, TIGProduct NumberK2619-1K2619-2K2620-1K2618-1 Ready-Pak®Package See back for complete specs© Lincoln Global, Inc. All Rights Reserved.275TIG WELDERSInput Power (Voltage/Phase/Hertz)K2619-1/K2618-1:208/230/460/1/60K2619-2:460/575/1/60K2620-1:220-230/380-400/415/1/50/60Input Current at Rated Output208V:104460V:47220-230V:95575V:38230V:94380-400V:55415V:50Rated Output: Current/Voltage/Duty Cycle275A/31V/40%Weight/Dimensions (H x W x D)397 lbs. (180 kg)31 x 22 x 26 in.(787 x 559 x 660 mm)INPUT OUTPUTK2618-1 Includes:K2619-1Under-Cooler Cart Water Cooler –PH: +1.216-481-8100 • LI NC OL N E L E C TR ICShown K2619-1[ 2]|Precision TIG ®275What Is It?Pulse welding systems vary weld current between peak (high heat) and background current (low heat) levels. Adjusting the pulse frequency controls the level of heat input applied to the weld relative to the weld travel speed.ResultsBetter control of heat input in the weld, resulting in:•Reduced warping and burnthrough on thin materials. •Smaller heat-affected zone – good for thin material.•Smaller bead profile without compromising proper penetration.Easy “Set It/See It” Operation:•Flashing indicator light lets you see the pulse rate before you strike an arc.W e l d i n g C u r r e ntTimePulsed TIG Weld (at 60 amps)Standard TIG Weld (at 60 amps) Smaller HeatAffected ZoneSmaller Bead ProfileMicro-Start ™II Technology aids arc stabilityTHROUGHOUT THE WELD CYCLE – even at the lowest amperage! Micro-Start ™II Technologycontrolled ramp down helps precisely fill the weld crater for quality results.Micro-Start ™II Technology minimizes high frequency and ‘hot starts’ to deliver soft arc starts without arc wandering for AC and DC welding. Arc PerformanceMicro-Start ™Stable, Focused Arc Precise Crater Fill“Set It/See It” Pulse Control — Make attractive and consistent welds!N O WIN C L U D ESf o r A L UM IN U MW E L D INGA CPrecision TIG ®275| [ 3]AC Auto Balance ®Controls —Automatically sets the optimal cleaning vs. penetration level for aluminum welding!What Is It?When aluminum welding, the positive (+) portion of the AC weldingamperage cleans the oxides from the aluminum surface. The negative (-)portion delivers more heat input, increasing penetration level.Patented AC Auto Balance ®automatically sets the ratio of cleaning action (+) versus penetration (-) based on amperage.Manual balance control provides the flexibility to customize the arc to your preference.Easy Operation:•Set it and forget it or override when you choose to customize the settings.More Cleaning (+)Less Cleaning (+)Less Penetration(-)More Penetration (-)W E L D I N G W E L D I N G TIMETIMEMaximum Cleaning SettingMaximum Penetration SettingAuto Balance Setting•Fan-As-Needed (F.A.N.)™minimizes repeated heating and cooling of internal components, keeps dust and dirt build-up to a minimum and saves on electricity costs. •Engineered cooling air routing brings clean air in from the top and exhausts at the bottom to draw and collect less dirt in the machine. •Compare these reliability enhancing design features: — Crimped and soldered power connections.— Wound and varnished electrical coils do not require coil spacers used on competitive models. — Locking tabs on PC board connectors eliminates loose connections.•Tough testing cycles ensure long service — dropping, jerking,rolling, shipping, vibration, resistance to real world extreme conditions, and extended in-service life testing. •CSA C/US certified.•Lincoln three-year warranty on parts and labor.Clean, cool air route shown.Snap-action durable switches make positive mechanical contact to reduce chances ofintermittent contact failure.[ 4]| Precision TIG ®275Shown: K2618-1Water-Cooled Ready-Pak ®PackageTorch Parts Storage Compartment.Optional TIG pulsing helps you make great welds.Water-cooled torch connections with no adapters — side mounted to keep out of the way and protected.Neat/organized cable management with integratedtorch holster.Separate output studs for stick and TIG keep both stick electrode holder and TIG torch connected at the same time — eliminates set-up changeover when switching processes.Easily accessible input voltagereconnect panel.Low-Lift ™ Shielding Gas Bottle Platform.Lockable Undercarriage Storage and Water Cooler Drawers.Reliable Pro-Con Pump.Optional Features:(standard with K2618-1 Water-Cooled Ready-Pak ®Package)Precision TIG ®275| [ 5]Large, well-spaced controls make it easy to view and set upwith gloved hands.SET-UP MENUPress and hold the menu button to display up to seven programmable parameters. The setting of the desired level is displayed, and increasing or decreasing the level setting is easy.The Set-Up Menu includes:Standard•DC TIG Start Modes: High Frequency, Scratch Start, and Touch Start TIG ®.•Adjustable Preflow Time.•Adjustable Start Pulse for Soft or Forceful Starts.With Optional Advanced Control Panel •Adjustable TIG Hot Start.•Adjustable Upslope Time.•Adjustable Stick Hot Start.•Adjustable Stick Arc Force.A)Minimum Output Control & Display Switch (Also displays output voltage)B)Set-Up Menu (see below)C)Digital MeterD)Local/Remote Current Control Switch E)Maximum Output Control F)Post Flow Time G)Thermal Shutdown Light H)Optional Advanced Control Panel 1)Trigger Switch (2-step/4-step)2)Pulse/Spot Time Mode Switch 3)Pulse Frequency Control 4)Pulse % On Time Control 5)Pulse Background Current Control 6)Downslope Time, In Seconds 7)Spot Time I)Polarity Switch J)Power Switch K)AC Balance Control L)Mode SwitchH123 4 & 756BCDEAF G HI J KLC U S T O M E R A S S I S T A N C E P O L I C YThe business of The Lincoln Electric Company ®is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for information or advice about their use of our products. Our employees respond to inquiries to the best of their ability based on information provided to them by the customers and the knowledge they may have concerning the application. Our employees, however, are not in a position to verify the information provided or to evaluate the engineering requirements for the particular weldment. Accordingly, Lincoln Electric does not warrant or guarantee or assume any liability with respect to such information or advice. Moreover, the provision of such information or advice does not create, expand, or alter any warranty on our products. Any express or implied warranty that might arise from the information or advice, including any implied warranty of merchantability or any warranty of fitness for any customers’ particular purpose is specifically disclaimed.Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to for any updated information.For best welding results with Lincoln Electric equipment,always use Lincoln Electric consumables. Visit for more details.GENERAL OPTIONSAdvanced Control Panel Provides 2/4-step trigger with adjustable Pulser controls and Downslope timer for TIG welding.Also includes adjustable Hot Start and Arc Force internal panel controls for stick welding, and other user selectable features.Order K2621-1Under-Cooler Cart Water Cooler Includes “cooler-in-a-drawer” with hoses and a lockable storage drawer on a dual bottle undercarriage. Two gallon (7.5 ltrs.) capacity.Order K1828-1UndercarriageIncludes a dual bottle rack with chain and front casters, rear wheels and a handle. Order K1869-1Harris ®Argon Flowmeter RegulatorDeluxe flowmeter/regulator. Includes 10 ft. (3.0 m) hose. Order 3100211Work Clamp & Cable Assembly 15 ft. 2/0 cable with 1/2 in. stud lug and work clamp. Order K2150-1STICK OPTIONSAccessory KitFor stick welding. Includes 35 ft.(10.7 m) 2/0 electrode cable with lug, 30 ft. (9.1 m) 2/0 work cable with lugs, headshield, filter plate,work clamp and electrode holder.400 amp capacity.Order K704Accessory KitFor stick welding. Includes 20 ft. (6.1 m) #6 electrode cable with lug,15 ft. (4.6 m) #6 work cable with lugs, headshield, filter plate, work clamp, electrode holder and sample pack of mild steel electrode. 150amp capacity.Order K875Remote Output ControlConsists of a control box with choice of two cable lengths. Permits remote adjustment of output. 6 pin connection.Order K857for 25 ft. (7.6 m)Order K857-1for 100 ft. (30.5 m) TIG OPTIONSMagnum®Pro-Torch™TIG TorchesA full line of air-cooled and water-cooled torches available.Request publication E12.150PTA-26 One-Cable AdapterAdapts the 7/8 in. PTA-26 fitting tothe 5/8 in. gas and powerconnection on machine. Order K2166-1PTA-9, -17 One-Cable Adapter Adapts the 3/8 in. PTA-9 or -17fitting to the 5/8 in. gas and power connection on machine.Order K2166-3PTA-9, PTA-17, PTA-26 Two-Cable AdapterConverts the 7/8 in. water andpower connection on the machine to a 1/2 in. output stud for use with a two-cable air-cooled TIG torch.Order K2166-2Foot Amptrol ™Varies current for making critical TIG welds. Depress pedal to increase current. Depressing pedal fullyachieves maximum set current. Fully raising the pedal finishes the weld and starts the afterflow cycle.Includes 25 ft. (7.6 m) control cable.6-pin plug connection.Order K870Hand Amptrol ™Provides 25 ft. (7.6 m) of remote current control for TIG welding (6 pin plug connection). Velcro straps secure torch.Order K963-3(One size fits all Pro-Torch ™TIG Torches.)Arc Start SwitchNeeded if an Amptrol ™is not used when TIG welding. Comes with a 25ft. (7.6 m) cable. Attaches to the TIG torch for convenient finger control. 6-pin plug connection. Order K814Cut Length Consumables TIG welding filler metals are available for welding stainless steel, mild steel, aluminum and copper alloys.See publication C1.10。

K20和K80申克秤说明书

K20和K80申克秤说明书

申克秤操作说明书第一章设备简介 (3)1.1申克秤简介 (3)1.2术语定义 (3)第二章设备结构 (5)2.1设备组成 (5)2.2注意事项: (6)第三章工作原理 (7)3.1申克秤计量原理 (7)第四章操作步骤 (10)4.1申克秤工作流程 (10)4.2申克秤操作条件 (10)4.3注意事项 (11)4.4压缩空气压力调节 (12)第五章检查维护及常见故障处理 (14)5.1检查维护 (14)5.2造成运行中煤粉秤的跳停的原因有如下几种 (37)5.3故障排除 (37)第一章设备简介1.1 申克秤简介申克秤是申克公司应用科里奥利原理开发的一种煤粉喂料计量系统。

煤粉由煤粉仓进入叶轮给料机时,首先经过内置搅拌器,被充分流态化,使其畅通,由叶轮给料机实现稳定喂料,进入科里奥利质量流量计被计量后进入煤粉输送管道,输送至窑头或分解炉。

测得的流量信号(实际值)输入MULTICONT测控系统,实际值与设定值在系统中进行比较,及时输出反馈信号,调节叶轮给料机转速,实现稳定喂料。

煤粉由流量计流出后,经过一段弯管进入输煤管道,由于喷嘴两边的正负压差(喷嘴位置需在安装调试时确定),这样煤粉可以较容易地被输送。

同时,从喷嘴靠罗茨风机端引出一条正压管线,对叶轮给料机内施加一个小的气压,使下料更为顺畅。

叶轮与外壳间隙仅0.2mm-0.35mm,被煤粉填充,可以保持叶轮给料机上下的压差,保证下料流畅及稳定。

该喂煤系统的叶轮给料机与煤粉仓出料管之间有一闸板用法兰联接,流量计与叶轮给料机出料管之间、流量计出料管与煤粉输送管线之间也用法兰联接,无需其它安装支架,安装高度低,安装和折卸维修方便;密封性能好,保持煤粉仓下的环境。

我公司12000TPD生产线共有三台申克秤,一台在煤粉制备车间供窑头燃烧器用煤,型号为Multicor-K120,两台在窑尾预热器处供分解炉用煤,型号为Multicor-K80。

1.2 术语定义Disocont: 煤粉秤计量仪表型号Multicell: 带搅拌器的星形喂料系统Multicor-K80: 煤粉秤计量单元型号,“K”代表煤粉计量系列,80为流经计量单元的物料流量为80m3/hAgitator: 搅拌器Star Feeder:星形下料器Optional Dryer:压缩空气干燥器Coriolis:科里奥立力Conveying Air:输送空气Compress Air:压缩空气Mode OP:本地操作模式Mode Normal: 中控操作模式V olume Mode: 容积方式Gravimetric Mode: 称重方式EasyServe10.0:Schenck: 提供的煤粉秤控制软件第二章设备结构2.1 设备组成Mulitcor-K80 煤粉秤煤粉计量系统外形如图1所示,Multicor-K80 系列组件按功能划分主要由四部分组成:2.1.1 MUTICELL rotary feeder (MUTICELL旋转喂料系统),由Integrated Drive(机电一体化驱动单元)和Star Feeder(星形回转下料器)组成,如图2所示。

K1000TII标准程序调试参数说明

K1000TII标准程序调试参数说明

K1000T标准程序调试相关参数表;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;PLC记忆型控制继电器信号定义;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;SKEY_K = K0.7 ;选择X3.0功能; 1-程序开关;0-主轴暂停开关MST_K = K0.6 ;禁止X3.1为循环启动开关; 1-禁止;0-有效MSP_K = K0.5 ;禁止X3.2为暂停开关; 1-禁止;0-有效MOT_K = K0.4 ;选择是否检查硬限位1:不检查MESP_K = K0.3 ;禁止急停功能; 1-禁止;0-有效MESP3_K = K0.2 ;禁止X4.7为急停开关3; 1-禁止;0-有效MESP2_K = K0.1 ;禁止X3.3为急停开关2; 1-禁止;0-有效MESP1_K = K0.0 ;禁止X2.4为急停开关1; 1-禁止;0-有效ZDIL_K = K1.6 ;选择主轴制动时是否互锁进给轴AGIM_K = K1.4 ;主轴档位反馈信号有效电平;1:高电平;0:低电平AGIN_K = K1.3 ;自动换档时;是否检查档位反馈信号;1:检查;0:不检查AGST_K = K1.2 ;自动换档时;是否需要手动参与;1:需要手工换档并且再次按下启动键AGEARM_K = K1.1 ;选择主轴通过M指令换档1:M指令换档;0:根据S命令自动换档AGEAR_K = K1.0 ;选择主轴自动换档或者手动换档MZRNX_K = K2.5 ;选择回零按键方向MZRNZ_K = K2.4 ;选择回零按键方向ZLOK_K = K2.3 ;选择回零按键自保持RH_AUTO_K = K2.1 ;选择自动润滑机能MPLS_K = K3.7 ;M代码脉冲输出SUOS_K = K3.6 ;选择宏输出功能1:S1-S8为宏输出;0:MNOUT_K = K3.5 ;选择工件计数到达输出机能SAGT_K = K3.4 ;选择防护门有效电平;1:低电平防护门关闭;0:高电平防护门关闭SSGT_K = K3.3 ;选择防护门机能1:有效0:无效TPLS_K = K3.2 ;台尾控制0-输出电平;1-输出脉冲;QPLS_K = K3.1 ;卡盘控制0-输出电平;1-输出脉冲;QPIN_K = K3.0 ;卡盘控制0-不检查卡紧信号;1-检查卡紧信号;TCKI_K = K4.7 ;选择刀位反馈信号检查TTYP_K = K4.6 ;选择刀架类型0:宏达转塔刀架;1:亚兴液压刀架RVX_K = K4.5 ;后刀架机能选择1:选择后刀架TSGN_K = K4.4 ;宏达刀架到位信号电平类型;0:高电平常开;1:低电平常闭TCPS_K = K4.3 ;宏达刀架锁紧信号电平类型;0:低电平常闭;1:高电平常开TTYP_SUP_K = K4.2 ;六鑫亚兴液压刀架的选择TTYP_K=0;TTYP_SUP_K=1:表示选择六鑫刀架;TTYP_K=1;TTYP_SUP_K=1:表示选择亚兴刀架QPTYP_K = K4.1 ;卡盘类型选择;0:外卡盘; 1:内卡盘QPSL_K = K4.0 ;卡盘机能是否有效;0:无效;1:有效MOV_HOT_K = K5.4 ;屏蔽环球刀架电机过热报警;1:屏蔽EHOF_K = K5.3 ;选择外部手轮时;面板手轮方式是否有效..0:无效1:有效HPG_K = K5.2 ;选择外部手轮OV_EXT_ACT_K = K5.0 ;选择外部倍率开关;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;PLC数据表信号定义;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;TOOL_TOL_D = D7 ;总刀具数T_POSCTR_CONST_D = D8 ;刀位旋转计数设定值T_POSCTR_CONST1_D = D9T_POSCTR_V AL_D = D12 ;刀位旋转计数当前值;;;;;;;;;;;;;SPCNT 参数区域LOWER_SPA_LIMIT_D = D32 ;D32-D35 主轴最小模拟量输出UPER_SPA_LIMIT_D = D36 ;D36-D39 主轴最大模拟量输出;最大设定为4095 MAX1_SP_LIMIT_D = D40 ;D40-D43 主轴1档最大速度;每档实际的最大速度受UPER_SPA_LIMIT_D限制MAX2_SP_LIMIT_D = D44 ;D44-D47 主轴2档最大速度;每档实际的最大速度受UPER_SPA_LIMIT_D限制MAX3_SP_LIMIT_D = D48 ;D48-D51 主轴3档最大速度;每档实际的最大速度受UPER_SPA_LIMIT_D限制MAX4_SP_LIMIT_D = D52 ;D52-D55 主轴4档最大速度;每档实际的最大速度受UPER_SPA_LIMIT_D限制SOR_SP_D = D56 ;D56-D59 主轴换档低速MCNO_D = D60 ;D60-D63 加工件计数MCNO_D1 = D64 ;D64-D67 加工到达计数MCNO_D2 = D68 ;D68-D71 加工到达设定值;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;PLC定时器定义;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;T_MCODE = T00 ;M代码执行时间定时器T_SCODE = T01 ;S代码执行时间定时器T_TCODE = T02 ;T代码执行时间定时器T_CNG = T03 ;换刀过程定时器T_PSW = T04 ;压力不足延时T_RHON = T05 ;自动润滑打开时间定时器T_RHOFF = T06 ;自动润滑关闭时间定时器T_SP_T1 = T07 ;互锁开始到主轴停止输出的延时T_SP_T2 = T08 ;主轴停止输出到主轴制动输出的延时T_SP_T3 = T09 ;主轴制动输出到互锁解除的延时T_AGEAR1 = T10 ;主轴换档定时器1T_AGEAR2 = T11 ;主轴换档定时器2T_QP = T12 ;卡盘脉冲宽度T_TW = T13 ;台尾脉冲宽度T_MPLS = T14 ;M代码脉冲输出宽度T_CW_CCW = T15 ;宏达转塔刀架;正转停止到反转锁紧输出的延迟时间T_POK_TCP = T16 ;宏达转塔刀架;刀架到位到锁紧到位的允许时间T_TCP_CCWE = T17 ;宏达转塔刀架;刀架锁紧到位到反转锁紧停止的延迟时间T_VOI = T18 ;外部蜂鸣器输出定时器。

常用规格电阻一览电阻基本知识检测方法参数对应表

常用规格电阻一览电阻基本知识检测方法参数对应表

本文档为整理搜集网络中关于电阻的一些基本知识,仅供参考学习使用。

本文大致包含以下内容;1;常用阻值表2;电阻基础知识3;电阻基本检测方法常用阻值表;此表罗列的5% 1%常用阻值表,规格参数适用于大部分贴片电阻于色环电阻5%精度阻值表单位欧姆(Ω)(E24)1.0 5.6 33 160 820 3.9K 20K 10 0K 510K2.7M1.1 6.2 36 180 910 4.3K 22K 11 0K 560K 3M1.2 6.8 39 200 1K 4.7K 24K 1 20K 620K 3.3M1.3 7.5 43 220 1.1K 5.1K 27K 130 K 680K 3.6M1.5 8.2 47 240 1.2K 5.6K 30K 150 K 750K 3.9M1.6 9.1 51 270 1.3K 6.2K 33K 160 K 820K 4.3M1.8 10 56 300 1.5K 6.6K 36K 18 0K 910K 4.7M2.0 11 62 330 1.6K 7.5K 39K 20 0K 1M 5.1M2.2 12 68 360 1.8K 8.2K 43K 22 0K 1.1M 5.6M2.4 13 75 390 2K 9.1K 47K240K 1.2M 6.2M2.7 15 82 430 2.2K 10K 51K 2 70K 1.3M 6.8M3.0 16 91 470 2.4K 11K 56K 3 00K 1.5M 7.5M3.3 18 100 510 2.7K 12K 62K 33 0K 1.6M 8.2M3.6 20 110 560 3K 13K 68K360K 1.8M 9.1M3.9 22 120 620 3.2K 15K 75K 39 0K 2M 10M4.3 24 130 680 3.3K 16K 82K 43 0K 2.2M 15M4.7 27 150 750 3.6K 18K 91K 47 0K 2.4M 22M5.1 30备注;15M 22M属于高阻,相对价格比其他略贵些1%精度阻值表单位欧姆(Ω)(E96)10 33 100 332 1K 3.32K 10.5K34K 107K 357K10.2 33.2 102 340 1.02K 3.4K 10.7K 34.8K110K 360K10.5 34 105 348 1.05K 3.48K 11K 35 .7K 113K 365K10.7 34.8 107 350 1.07K 3.57K 11.3K 36K115K 374K11 35.7 110 357 1.1K 3.6K 11.5K 36 .5K 118K 383K11.3 36 113 360 1.13K 3.65K 11.8K 37.4 K 120K 390K11.5 36.5 115 365 1.15K 3.74K 12K 38.3 K 121K 392K11.8 37.4 118 374 1.18K 3.83K 12.1K 39K124K 402K12 38.3 120 383 1.2K 3.9K 12.4K 39 .2K 127K 412K12.1 39 121 390 1.21K 3.92K 12.7K 40.2 K 130K 422K12.4 39.2 124 392 1.24K 4.02K 13K 41.2 K 133K 430K12.7 40.2 127 402 1.27K 4.12K 13.3K 42.2K137K 432K13 41.2 130 412 1.3K 4.22K 13.7K 43K140K 442K13.3 42.2 133 422 1.33K 4.32K 14K 43.2 K 143K 453K13.7 43 137 430 1.37K 4.42K 14.3K 44.2 K 147K 464K14 43.2 140 432 1.4K 4.53K 14.7K 45. 3K 150K 470K14.3 44.2 143 442 1.43K 4.64K 15K 46.4 K 154K 475K14.7 45.3 147 453 1.47K 4.7K 15.4K 47K158K 487K15 46.4 150 464 1.5K 4.75K 15.8K 47. 5K 160K 499K15.4 47 154 470 1.54K 4.87K 16K 48 .7K 162K 511K15.8 47.5 158 475 1.58K 4.99K 16.2K 49.9K16 48.7 160 487 1.6K 5.1K 16.5K 51 K 169K 536K16.2 49.9 162 499 1.62K 5.11K 16.9K 51.1K174K 549K16.5 51 165 510 1.65K 5.23K 17.4K 52.3 K 178K 560K16.9 51.1 169 511 1.69K 5.36K 17.8K 53.6K180K 562K17.4 52.3 174 523 1.74K 5.49K 18K 54.9 K 182K 576K17.8 53.6 178 536 1.78K 5.6K 18.2K 56K187K 590K18 54.9 180 549 1.8K 5.62K 18.7K 56. 2K 191K 604K18.2 56 182 560 1.82K 5.76K 19.1K 57.6 K 196K 619K18.7 56.2 187 562 1.87K 5.9K 19.6K 59K200K 620K19.1 57.6 191 565 1.91K 6.04K 20K 60.4 K 205K 634K19.6 59 196 578 1.96K 6.19K 20.5K 61.9 K 210K 649K20 60.4 200 590 2K 6.2K 21K62K 215K 665K20.5 61.9 205 604 2.05K 6.34K 21.5K 63.4K220K 680K21 62 210 619 2.1K 6.49K 22K64.9K 221K 681K21.5 63.4 215 620 2.15K 6.65K 22.1K 66.5K226K 698K22 64.9 220 634 2.2K 6.8K 22.6K 68 K 232K 715K22.1 66.5 221 649 2.21K 6.81K 23.2K 68.1K237K 732K22.6 68 226 665 2.26K 6.98K 23.7K 69.8 K 240K 750K23.2 68.1 232 680 2.32K 7.15K 24K 71.5 K 243K 768K23.7 69.8 237 681 2.37 7.32K 24.3K 73.2K249K 787K24 71.5 240 698 2.4K 7.5K 24.9K 75 K 255K 806K24.3 73.2 243 715 2.43K 7.68K 25.5K 76.8K24.7 75 249 732 2.49K 7.87K 26.1K 78.7 K 267K 825K24.9 75.5 255 750 2.55K 8.06K 26.7K 80.6K270K 845K25.5 76.8 261 768 2.61K 8.2K 27K 82K274K 866K26.1 78.7 267 787 2.67K 8.25K 27.4K 82.5K280K 887K26.7 80.6 270 806 2.7K 8.45K 28K 84. 5K 287K 909K27 82 274 820 2.74K 8.66K 28.7K 86 .6K 294K 910K27.4 82.5 280 825 2.8K 8.8K 29.4K 88.7 K 300K 931K28 84.5 287 845 2.87K 8.87K 30K 90 .9K 301K 953K28.7 86.6 294 866 2.94K 9.09K 30.1K 91K309K 976K29.4 88.7 300 887 3.0K 9.1K 30.9K 93.1 K 316K 1.0M30 90.9 301 909 3.01K 9.31K 31.6K 95.3 K 324K 1.5M30.1 91 309 910 3.09K 9.53K 32.4K 97.6 K 330K 2.2M30.9 93.1 316 931 3.16K 9.76K 33K 100K332K31.6 95.3 324 953 3.24K 10K 33.2K 102K340K32.4 97.6 330 976 3.3K 10.2K 33.6K 105K348K备注;1M 1.5M 2.2M属于高阻相对价格比其他略贵些电阻基础知识;电阻器是电路元件中应用最广泛的一种,在电子设备中约占元件总数的30%以上,其质量的好坏对电路工作的稳定性有极大影响。

lk培训手册

lk培训手册
第3页
LK PLC 培训手册
2. 高可靠性
提供冗余系统的解决方案,支持电源冗余、CPU 冗余、以太网冗余、总线冗余 具备良好的电磁兼容性,现场到系统、通道与通道间采用隔离措施 具有通信故障时的输出保持或输出预置功能 低功耗无风扇设计,模块运行中无过热现象
3. 易用性和易维护性
模块支持带电插拔,更换时无需中断系统运行,新模块将自动进行数据的初始化设置, 并快速与 CPU 建立通信
二、LK-PLC 特点
1. 高性能
配置工业级 100MHz/266MHz/533MHz 处理器,拥有纳秒级(13ns)的处理速度 系统 I/O 容量大,数字量 I/O 最多可达 57344 点,模拟量 I/O 最多可达 3584 点 具有大容量内存。用于程序,最大 16MB;用于数据,最大 64MB+1MB 掉电保持区 强大的模拟量处理功能
模块智能化程度高,可实现强大的自诊断功能 编程软件符合 IEC61131-3 国际标准,具有 IL、LD、FBD、SFC、ST 五种编程语言 灵活的 SD 存储卡,使系统维护更加方便、快捷 背板上设计有防混销,以避免插错模块 外形小巧,易于安装。既可分散,也可集中
4. 开放性和灵活性
支持多种通信协议,如 TCP/IP、PROFIBUS-DP、MODBUS、DeviceNet、自由口等协 议
采用开放式设计,可为各类 HMI 软件提供标准接口 强大的扩展能力 提供普通和高速两种不同类型、不同成本的 I/O 模块
5. 设计新颖
微型化设计,结构紧凑,大大节省了系统的安装空间 独特的接线端子设计,接线端子固定在背板上,独立于 I/O 模块
LK 冗余系统包括支持冗余功能的 CPU 模块、PROFIBUS-DP 通信接口模块、本地背板 (双 CPU 插槽)、扩展背板和普通的 I/O 模块组成,两个 CPU 之间的数据同步通过高速背 板总线,无需专门的同步模块。

克利克顿2SE固态旋风开关产品介绍说明书

克利克顿2SE固态旋风开关产品介绍说明书

|2SE SERIESSolid-State Vane SwitchIntroductionThe Klixon® 2SE solid–state vane switch has advanced, state-of-the-art airflow sensing. Successor to electromechanical vane types, the 2SE is designed to sense and protect against the loss of airflow in power supplies, data processing units, or any other commercial or military electronic equipment where it is necessary to recognize the loss or reduction of airflow.SPEC OVERVIEW Features• Solid–state• High reliability• Commercial or military grades• Variety of switching modesTEMPERATURE VS. VELOCITY CURVENote: The gray region is the deadband, in which sensor could be in either the fault or the no–fault condition. Number on curve is for building part number of device. (Scroll down for information on building a part numbers, see at left for definitions.)WIRING DIAGRAM OF A STANDARD 2SE DEVICEPOSITIVE TEMPERATURE COEFFICIENT (PTC) SENSORDEFINITIONS FOR THE TEMPERATURE VS. VELOCITYA Positive Temperature Coefficient (PTC) sensor provides the airflow sensing function. PTC sensors remain at a low, relatively constant level of resistance over a wide temperature range then abruptly increase resistance logarithmically at an elevated temperature known as an anomaly temperature. As the transition is approached, a slight temperature rise causes a dramatic increase in resistance.Power supplied to the PTC sensor will cause it to self–heat to a high resistance condition. Sufficient airflow will cool the sensor to its low resistance level. Insufficient airflow allows the sensor to self–heat and reach a high resistance state. This resistance change and accompanying decrease in current is used to trigger an output transistor or SCR.Curve (at right)No–Fault: Operation points within this region represent the normal state. (i.e. sufficient airflow to cool sensor to its low resistance level.)Fault: Operating points within this region represent the anomaly state. (i.e. Insufficient airflow allows sensor to reach high resistance state.)CONFIGURATIONBelow is the typical 2SE configuration, but others are available. Drawing is for reference only.Page 4CONTACT US Americas +1 (888) 438 2214*******************Europe, Middle East & Africa +31 (74) 357 8156temperature-info.eu @ Asia Pacific *************************.com China +86 (21) 2306 1500Japan +81 (45) 277 7117Korea +82 (31) 601 2004India +91 (80) 67920890Rest of Asia +886 (2) 27602006ext 2808Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice.Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF.All products are sold subject to Sensata’s terms and conditions of sale supplied at SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION Revised 3/6/18ORDERING OPTIONSD = ±2.5%G = ±5.0%M = ±10.0%。

库仑力常数k值

库仑力常数k值

库仑力常数k值库仑力常数k,作为电磁学中的一个基础而重要的物理量,描述了电荷间相互作用力的性质和强度。

在库仑定律中,k值起到了桥梁和纽带的作用,将电荷量、距离与电场力紧密地联系在一起。

本文将从库仑力常数k的定义、物理意义、测量方法及其在电磁学中的应用等方面进行详细解析,以期为读者提供一个全面而深入的理解。

一、库仑力常数k的定义与物理意义库仑力常数k,又称静电常数或电力常数,是库仑定律中的一个比例系数。

库仑定律是电磁学中的基本定律之一,它描述了真空中两个静止点电荷之间的相互作用力。

这个力的大小与两个电荷的电量成正比,与它们之间的距离的平方成反比。

而库仑力常数k,正是这个比例关系的量化体现。

具体来说,库仑定律的数学表达式为:F = k * (Q1 * Q2) / r^2。

其中,F表示两个电荷之间的电场力,Q1和Q2分别表示两个电荷的电量,r表示它们之间的距离,而k就是库仑力常数。

在国际单位制(SI)中,k的数值约为8.9875517923(14)×10^9 N·m²/C²。

库仑力常数的物理意义在于,它反映了电荷间相互作用力的本质特征。

在真空中,两个静止的点电荷之间会产生一种电场力,这种力的大小与电荷的电量和它们之间的距离有关。

而库仑力常数k,正是用来描述这种关系的一个比例系数。

它的存在,使得我们可以通过测量电荷的电量和距离,来准确地计算出它们之间的电场力。

二、库仑力常数k的测量方法由于库仑力常数k在电磁学中的重要地位,对其进行准确测量一直是物理学家们关注的焦点。

然而,由于库仑力本身非常微弱,且容易受到其他因素的干扰,因此对其进行精确测量是一项极具挑战性的任务。

目前,测量库仑力常数k的方法主要有两种:一种是基于库仑定律的直接测量法,另一种是基于量子电动力学的间接测量法。

1. 直接测量法:这种方法的基本思路是通过实验装置直接测量两个已知电量的点电荷之间的电场力,然后根据库仑定律的公式反推出k值。

k m二进制十进制

k m二进制十进制

k m二进制十进制K和M是计量单位,在不同的领域中有不同的含义和用途。

本文将介绍K和M在二进制和十进制中的应用。

我们来了解K和M在二进制中的含义。

在计算机科学中,K表示千,M表示百万。

在二进制中,K的值是1024,M的值是1024的平方,即1048576。

这是因为计算机是以二进制的方式来存储和处理数据的,所以在计算存储容量时使用的是二进制单位。

在十进制中,K表示千,M表示百万。

K的值是1000,M的值是1000000。

这是因为十进制是我们日常生活中使用的计数系统,所以在计算物理量时使用的是十进制单位。

在计算机存储容量中,我们经常使用K和M来表示文件的大小。

比如,一个文件的大小为1K,表示文件的大小为1024个字节;一个文件的大小为1M,表示文件的大小为1048576个字节。

这样的表示方法可以更加方便地计算和比较文件的大小。

除了计算机存储容量,K和M还可以用来表示计算机的速度和传输速率。

比如,一个计算机的处理速度为1KHz,表示计算机每秒钟可以执行1000条指令;一个网络的传输速率为1Mbps,表示网络每秒钟可以传输1000000个比特。

在其他领域中,K和M也有着广泛的应用。

比如,一辆汽车的速度为100km/h,表示汽车每小时可以行驶100公里;一个国家的人口为100M,表示国家的人口有1亿人。

K和M是一种计量单位,它们在二进制和十进制中有着不同的含义和用途。

在计算机科学中,K和M常用来表示存储容量、处理速度和传输速率;在其他领域中,K和M也常用来表示物理量和统计数据。

熟练掌握K和M的含义和用法,有助于我们更好地理解和应用计量单位。

SK100说明书 v2.0

SK100说明书 v2.0

SK100 ACCESS CONTROL SYSTEM TECHNICAL MANUAL产品技术手册V ersion 2.0对本手册所包含的所有信息,包括URL链接和其他网上资料,本公司有权未经通知,自行修改。

所举例引用的公司名称、组织机构、产品、人名以及事件,均与任何真实公司名称、组织机构、产品、人名和事件无关。

用户应遵守所有知识产权保护法律。

本手册任何部分在未经Singapore SmartKey Technology International Private Limited书面同意的情况下,不得以任何形式(电子媒体、影印、记录或其他)再版、存储或引用。

手册中提到的所有其他产品,其知识产权均为其相关拥有者所具有。

© 2005 Singapore SmartKey Technology International Private Limited.版权所有此产品符合欧洲以下标准:EMC Directive: 89/336/EEC目录1. SmartKey SK100系列控制器 (1)1.1简介 (1)1.2系统构成 (1)1.2.1 SK100单门控制器 (1)1.2.2读卡器 (1)1.2.3 门磁 (3)1.2.4 电控锁 (3)1.2.5 开门按钮 (4)1.2.6 其它输入/输出设备 (4)1.2.7电源 (4)1.2.8 与PC机相连接 (4)2. 安装 (5)2.1 SK100系列控制器接线图 (5)2.1.1控制器上的指示灯 (5)2.1.2 终端电阻 (5)2.2 与读卡器的连接 (7)2.3 与电控锁相连接 (8)2.4 与门磁的连接 (8)2.5 与开门按钮的连接 (9)2.6 与其它输入/输出设备的连接 (9)2.7 与电源的连接 (10)2.8 与PC机的连接 (11)2.9 控制器多阶层通讯方式 (12)2.10 给控制器通电 (13)3. 菜单操作 (13)3.1 系统菜单 (13)3.1.1 初始化系统 (14)3.1.2 设置控制器的ID地址 (14)3.1.3修改登录密码 (14)3.1.4 删除所有记录 (14)3.1.5 动态调整 (14)3.1.6 设置同卡延迟时间 (14)3.1.7 设置波特率 (15)3.1.9 修改安全密码 (15)3.1.10 设置键盘开门 (15)3.1.11 设置防尾随 (15)3.2 时间菜单 (15)3.2.1日期设置 (16)3.2.2 时间设置 (16)3.2.3 校正时间误差 (16)3.2.4 设置继电器定时 (16)3.2.5 设置时段 (17)3.2.6 设置时区 (17)3.2.7 设置时区表 (17)3.2.8 假日设置 (18)3.2.9 设置群组 (19)3.3 读卡器菜单 (19)3.3.1 设置读卡器的控制方向 (19)3.3.2 设置动作模式 (20)3.4 卡片菜单 (20)3.4.1 感应加卡 (20)3.4.2 位置码加卡 (20)3.4.3 感应删除卡片 (20)3.4.4 删除全部卡片 (21)3.4.5 位置码删卡 (21)3.4.6 按卡片序号删卡 (21)3.4.7 依群组增加卡片 (21)3.5 门菜单 (21)3.5.1设置返潜回 (22)3.5.2 设置开门时间 (22)3.5.3 自动开门时区表 (22)3.5.4 设置密码取消时区表 (22)3.5.5 设置多卡认证 (22)3.5.6 设置互锁 (22)3.5.7设置密码开门时区表 (23)3.5.8 设置门磁的常态值 (23)3.5.9 设置报警输出 (23)3.6 高级菜单 (23)3.6.1 重置反潜回 (24)3.6.2 设置报警键 (24)3.6.3 设置卡号输出字节 (24)3.6.4 设置卡号显示方式 (24)3.7 查询 (24)3.7.1 控制器ID号 (24)3.7.2 控制器层级 (25)3.7.3 控制器序列号 (25)3.7.4 卡片数量 (25)3.7.5 记录数量 (25)3.7.6 软件版本号 (25)3.7.7 同卡延迟时间 (25)3.7.8 卡片最大存储量 (25)3.7.9 记录最大存储量 (25)3.7.10 监控通讯状态 (25)3.8 开门命令 (26)3.8.1 键盘开门 (26)3.8.2 密码开门 (26)3.9 菜单一览表 (27)附录1 电缆规格 (29)附录2 电源规格 (30)附录3 控制器后盖安装尺寸 (31)SK100系列控制器说明书1. SmartKey SK100系列控制器1.1简介本手册讲述了SK100控制器安装及使用规范。

LK21OO用户手册V1.07

LK21OO用户手册V1.07

LK2100多功能标志标识一体机使用手册V1.07北京力码科信息技术有限公司LABEL & MARK INDUSTRIES COMPANYLABEL & MARK INDUSTRIES COMPANY安全须知 (4)1.概述 (5)1.1简介 (5)1.2主要特点 (6)2. 主要技术指标 (6)2.1技术规格 (6)2.2介质技术规格 (7)3.外观和组件 (8)3.1外观和组件 (8)3.2主要组件功能介绍 (10)3.3电源(告警)指示灯和蜂鸣器 (12)4.打印机的安装 (12)4.1打印机开箱 (12)4.2连接AC电源适配器 (12)4.3连接接口电缆 (13)4.4色带的安装 (13)4.5套管/热缩管的安装 (15)5.打印机的启动与打印 (16)5.1打印机启动与自检 (16)5.2打印方式和纸标记传感器类型的选择 (17)5.3打印 (18)5.4打印机的调整 (19)6.套管/热缩管使用 (20)6.1套管/热缩管机器的使用方法 (20)6.2套管/热缩管软件的使用方法 (20)7. 打印机的日常维护 (23)LK2100/LK3100多功能标志标识一体机7.1打印头清洁 (23)7.2传感器清洁 (24)7.3打印胶辊清洁 (25)8. 常见故障处理方法与维护 (26)欢迎欢迎使用LK2100 多功能标志标识一体机!使用前,请仔细阅读本使用手册,以便给您提供必要的帮助。

声明本手册内容未经同意不得随意更改,LABEL & MARK INDUSTRIES COMPANY(以下简称L-MARK)保留在技术、零部件、软件和硬件上变更产品的权利。

用户如果需要与产品有关的进一步信息,可与L-MARK或经销商联系。

未经L-MARK的书面许可,本手册的任何章节不得以任何形式、通过任何手段进行复制或传送。

本手册内容如有任何变动,恕不另行通知。

安全须知在操作使用打印机之前,请仔细阅读下面的注意事项:1.安全警告警告:打印头为发热部件,打印过程中和打印刚结束不要触摸打印头以及周边部件。

K系列科里奥利流量计

K系列科里奥利流量计

(1) 标示的流量精度包括重复性、线性和滞后的综合影响。
标定代码 A ±0.2% 流量
气体测量的精度和重复性
性能规格 质量流量精度 (1) 质量流量重复性 (1) 温度精度 温度重复性
(1) 标示的流量精度包括重复性、线性和滞后的综合影响。
所有型号 ±1.0% 流量 ±0.5% 流量 ±1 °C ±0.5% 的测量值 (°C) ±0.2 °C
质量流量测量
测量管在力的作用下发生摆动,从而产生正弦波。流量为零时,两根管道同相地发生振动。有流量时,科里奥利力促使管道发生 弯曲,从而引发相偏移。这两个波形之间的相位差与质量流量成正比。
无流量
有流量
入口检测位移
出口检测位移 入口检测位移
出口检测位移
时间
时间
时差
密度测量
测量管以其固有频率振动。管道内介质质量的变化将导致管道固有频率发生相应的变化。通过管道的频率变化来计算密度。
通道 B (可组态)
一路有源频率 / 脉冲输出
非本安型 可以输出用于表明流量或总量的质量流量或体积流量 可调整至 10,000 Hz 电源:+24 VDC ±3% 12,500 Hz 内输出与流量呈线性
AF
8
一路有源 4–20 毫安输出
非本安型
与所有其他输出和接地线 ±50 VDC 隔离 最大负载限制:820 欧
2017 年 1 月
4

德科蒙过程控制(武汉)有限公司 QQ:113821586 TEL:15527360871 张工
2017 年 1 月
K 系列科里奥利质量流量计
液体流量
额定流量
高准公司采用的 “额定流量”术语是指在参考条件下水流引起的仪表压降约为 1 barg 时对应的流量。

英文字母k是什么中文意思

英文字母k是什么中文意思

英文字母k是什么中文意思英文字母k是什么中文意思k是一个简单的英文字母,那你知道它的中文意思是吗?为此店铺为大家带来英文字母k的中文意思。

英文字母k的中文意思:kilobytes英 ['kɪləˌbaɪts] 美 ['kɪləˌbaɪts]名词千字节; 千字节,1024字节( kilobyte的名词复数 )1. 千字节:此外,它还支持便捷的网络浏览,以及基于EDGE的、数据连接速率最高可达每秒236.8千字节(kilobytes)的高质量流媒体. 与其功能相近但专为美洲市场设计推出的另一版本诺基亚6682图像智能电话预计将于2005年第二季度上市.2. kilobytes:k; 千字节3. kilobytes:kb; 千字节(1KB=1,024 bytes)例句1. The size of a page is typically some kilobytes.页面的大小通常是一些字节。

2. In Task Manager, the change in memory, in kilobytes, used since the last update.在任务管理器,内存中的变化,千字节为单位,自上一次更新使用。

3. Traditionally, computer memory indexing started at 0 and ran to 655360 (640 KiloBytes).过去,电脑内存的地址从0到655360(640千字节)。

4. Data rate is measured in kilobytes per second.对网站视频,尤其是流动视频来说,这是一项重要的设置。

5. A typical dial-up user will get a transfer rate of about 5 kilobytes per second, but that may be much slower at busy times.一个典型的拨号用户将获得约5千字节每秒的传输速率,但可能在繁忙时间慢得多。

海利普HLP-SK100系列说明书(中文版)

海利普HLP-SK100系列说明书(中文版)

93
6.11 第14组参数:特殊功能
101
6.12 第15组参数:变频器信息及记录
106
6.13 第16组参数:监控数据
109
6.14 第28组参数:特殊应用功能
118
第7章 快速应用指南
130
7.1 电机参数的自适应
130
7.2 操作面板控制起动/停止[HAND]
130
7.3 数字量输入端子控制启动/停止[AUTO]
75 75
3×440-480V50/60Hz 113 130
3×380-440V50/60Hz 140 147 75 75
3×440-480V50/60Hz 121 130 HLP-SK100007543
3×380-440V50/60Hz 166 177
90 90 3×440-480V50/60Hz 133 160
HLP-SK100系列使用说明书
系列
危险
● 实施配线前,请务必切断电源。 ● 请将变频器安装于金属类等不可燃材料上,以防止发生火灾。 ● 请不要把变频器安装在含有爆炸性气体的环境里,否则有引发
爆炸的危险。 ● 主回路端子配线必须正确,R、S、T为电源输入端子,绝对不可
与U、V、W混用,否则,送电时会造成变频器的损坏。 ● 端子必须单独接地,绝对不可接零线,否则,易引起变频器
9.94
3×380-440V50/60Hz ቤተ መጻሕፍቲ ባይዱ7 61 30 30
3×440-480V50/60Hz 49 52 HLP-SK100003043
3×380-440V50/60Hz 70 73 37 37
3×440-480V50/60Hz 57 65 25.4
3×380-440V50/60Hz 70 73 37 37

Dynalco Controls 0899F SST-2000ATM和SST-2000HTM系列速度

Dynalco Controls 0899F SST-2000ATM和SST-2000HTM系列速度
Approval contingent upon housing an SST-2000H Series device in a CSA-certified enclosure.
CE (Conformité Europeén)
SST-2000A & SST-2000H 89/336/EEC, Light Industrial; 72/23/EEC, Low Voltage Directive
©1999 Dynalco Controls
*THIRD PARTY APPROVALS CSA (Canadian Standards Association)
SST-2000A Series: General certification: LR 92270
SST-2000H Series: Cl. I, Div. 2, Grp. D approval: LR 45322
l Function: Converts frequency input (speed, rate) into linear proportional dc output. Provides alarm setpoints for over- and underspeed control and for sequential, startup, and shutdown switching.
l Models available with up to four alarm setpoints.
l Field-selectable frequency range.
l Field-adjustable sensitivity control.
l Field-programmable for many types of sensors, including contact closure input.

Sennheiser EK 2000 SKP 2000 SK 2000 SKM 2000 快速使用指

Sennheiser EK 2000 SKP 2000 SK 2000 SKM 2000 快速使用指
on
543.200MHz **2000** AF P MUTE
off
OFF
on off
on
543.850MHz **2000** AF P MUTE
off OFF
on off
Home screens
EK 2000
Audio Name level
Frequency
RF level
823.925MHz **2000**
Extended menu „Advanced Menu“
Tune Mute Mode (SK,SKP) RF Power PhantomPower48V (SKP) Cable Emulation (SK) Pilot Tone LCD Contrast Reset Software Revision Exit
LED: LOW BATT/ON
DOWN ON/OFF, ESC
Infra-red interface
On/Off SK 2000
UP SET
SKM 2000
LED: LOW BATT/ON
Infra-red interface
UP
SET
DOWN
ON/OFF, ESC
SKM 2000
on
543.200MHz **2000** AF P MUTE
Operating elements
EK 2000
VOL < 70 %
On/Off EK 2000
Headphone output
DOWN ON/OFF, ESC
Infra-red interface
Line output LED: LOW BATT/ON
UP SET
  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

《火炬之光2》100%处决高攻高速高暴击肉搏狂战爱玩狂战么?为什么!喜欢近战、喜欢肉搏、喜欢兵刃相见的热血战斗!狂战给你这一切!爱用什么武器呢?爱拿盾和双手武器的可以不用看下去了!爪的速度?剑的全面?斧的稳定?锤的打断?有没有喜欢用爪的,却打出了极品斧、剑、锤?要不要这么纠结啊!!!好吧让我来告诉你,这些可以【同时拥有】!请往下看~--------------------------------------------------------------------------------篇幅越来越长了,可能大家没耐心看完了吧 o(╯□╰)o双爪最高速,但是先天没有群伤,要靠技能弥补。

双剑最全面,功高有群伤,但没有极速快感,没有无视一半护甲的强大效果。

双斧最稳定,斧类武器攻击数值恒定,没有最大最小值,但是速度更慢了。

双锤最高攻,锤类还具有先天90%打断的效果,但是。

实在太慢了!现在,请用爪+剑、爪+斧、爪+锤的组合吧,极速我所欲也,高攻亦我所欲也!这套玩法的意义在于,让自己的武器选择有了更广阔的范围,让我带你领略不一样的狂战。

100%处决狂战,右手拿.48的爪类(追求高攻速,爪类有无视一半护甲的效果),左手拿剑、斧、锤类(有溅射、打断等效果,并且攻击要比爪类高不少)【☆☆☆不知道有多少人跟我一样,以前不知道爪和斧等,可以发动处决o(╯□╰)o】而当你100%处决率的时候,攻击速度是按照右手爪类的攻速来算的,也就是永远保持.48的极速,无视左手较慢速的武器攻速。

【原因见下方10月13号的更新,已说的比较详细,并且亲测有效!】这样的玩法有几点好处:1、对于boss单体输出,有爪类的无视一半护甲效果,有锤类的打断效果,并且能以爪类的高攻速,发挥出锤类等武器的高攻击,绝对比拿双爪的输出高很多,而且挥动频率丝毫不减慢!是不是很爽!【高攻速的好处我就不多说了,暴击吸血流,碎甲被动技,大家懂得!】2、对于群怪,亲测有溅射效果,配合暴风爪、红狼技能,AOE效果也很好!接下来问题就是如何堆100%处决,这也是该玩法的核心问题:1、人物初始属性10%处决2、被动技侩子手每级2%处决,人物42级能点出10点,也就是20%,满级15点是30%。

3、找点+处决几率的装备,狂战的专用黄装、套装一般都有5~10%处决的,能有2件以上为佳。

4、专注属性50点有+9%处决(亲测数据),这50点尽量靠装备和附魔,实在不行稍微加点属性点上去。

5、武器上自带的处决属性,一般都有10~15%处决的,多留意商店还是有不少的,挑把属性全面点的。

6、武器上的宝石,中期40级左右时候就有12%处决的宝石(我有没有记错?),往后更有15%、17%等,花点功夫的话,打个3~4颗还是有的吧。

【我觉得这最后一条算是一个致命缺点吧,占掉武器宝贵的孔啊!如果装备够牛逼,专注属性够高,后期侩子手技能加满,可以弥补弥补,不过那真是大大后期了o(╯□╰)o】综合以上几点,自己均衡补足一下,100%就有了!不要再纠结用爪子的高速,还是剑类的高攻溅射了,也不用主副手玩两套了,一爪一剑走天下吧O(∩_∩)O哈哈~PS.目测这种玩法能在50多级完成100%处决,也就是差不多刚进入二周目,人品好~装备好~有大号基础的话可能更早。

玩N周目的近战职业,生存才是王道,宝石优先减伤和撑血,然后在考虑输出,技能必须要有控制技,我喜欢战嚎~最后,如何组合你的双手武器,请尽情发挥你的想象力吧,打出极品的单手武器再也不用惋惜了,再也不用羡慕嫉妒恨了!--------------------------------------------------------------------------------2012.10.13发帖之后,跟一些玩家交流发现早期就获得“干草机”这把武器的玩家还真不少,属性主要是有个“+45%处决”,33力量&67敏捷就可以装备,有了这武器,使得我这以100%处决率为核心成型标准的狂战玩法,能更早发挥威力了。

首先我觉得还是有必要讲一讲100%处决时候的攻速问题:假设:A手0.5的攻速,B手1.5的攻速游戏中双持武器攻击的输出模式必定为:A B A B A B。

两手交替攻击,并轮流判断是否发动处决,不断循环1、在没有处决的情况下,就是:A(0.5)→B(1.5)→A(0.5)→B(1.5)。

循环输出。

2、在不满100%处决情况下,A手攻击时判断是否发动处决,如果是则带动B手一起攻击【即AB,攻速以A手0.5计算!】→接着还是轮到A手攻击判断,如果还发动【那还是AB,攻速以A手0.5计算!】→直到A手攻击没有发动处决【打出一次普通单手攻击A,耗时0.5】→换B手攻击判断,如果发动处决带动A手【那就是BA,但耗时以1.5计算!】。

以此类推如此就是:AB(0.5)→AB(0.5)→AB(0.5)→A(0.5)→BA(1.5)→BA(1.5)→BA(1.5)。

循环输出。

总之,ABABAB的轮流交替模式是不会变的,只不过是A手发动处决的时候,带动了B手一起挥出,并且跳过了B手的一次处决判断,紧接着继续进行A手是否处决的判断!3、有了这样的特性之后,当你100%处决的时,可以做到:A手攻击发动处决【耗时0.5】→A 手攻击发动处决【耗时0.5】→A手攻击发动处决【耗时0.5】。

即:AB(0.5)→AB(0.5)→AB(0.5)。

无限下去,完全无视了B手的攻速,因为B手是否发出“1.5秒攻速处决”的判断已经永远被跳过了!这样解释大家能明白么,所以才能实现100%以爪类的“高攻速”,带动另一只手剑、斧、锤类“高攻慢速”武器,发挥出强大的DPS效果。

然后想跟大家分享一下我精英二周目结束83级狂战的心得,近战面临的生存压力巨大,躺着的尸体是发挥不出DPS的!我主要靠减伤石头和加血石头这两种,加点前期3敏2力,大约50级以后,全力量加点。

技能主被动型,怎么加点以前帖子太丰富了,不详细赘述。

装备、附魔主要以生命值为主,加216血的宝石若干个,目前血量8500+,牺牲了一部分输出为代价的【原先一身DPS装!各种躺尸跑腿流!】2%、3%、5%全减伤石头各一个【我没刻意去刷N多个,复制就更没意思了】4%、5%减物理伤害的石头若干个宝石“杀死机器人之眼”【对3米内每个怪物-3%物理伤害偷取】头盔还穿着32级的黄色装备【对3米内每个怪物-7.5%物理伤害偷取】一件蓝色披肩【对3米内每个怪物-5%物理伤害偷取】再依靠【战斗狂怒】技能【对5米内每个怪物-6%物理伤害偷取】神技【战嚎】-40%攻速/移速/施法速,对所有怪包括boss100%有效,几乎全屏,持续12秒。

这样子一来,减伤属性:58%物理减伤(没算那些3米内偷取怪物物理伤害的属性,那个不显示在面板里的吧?),35%元素减伤(我算堆得很少的吧,有空再去刷几个3%、5%的减伤石头,在减伤这一点上,我还有很大的提升空间!)说说战斗心得,我尽量说得详细些,嫌烦的就不要看了吧。

依靠以上这些东西,碰到物理攻击怪物,基本不可能死召唤幽狼(不和谐吸血机器!)插旗(加速能量、闪避、抗击退、回蓝)风暴爪(平砍以50%概率50%+的武器DPS闪电伤害多打2个怪)赤狼(平砍出暴击时,可以对附近2个怪造成固定值物理伤害)冰盾(不解释,闯荡江湖防暗箭伤人的必备良技,就是持续时间短了点,注意补状态)战斗狂怒(一定范围内,每个怪物给自己+伤害%,并且偷取怪物的物理伤害%,变相的物理减伤技能嘛)爪+剑或斧或锤,高攻速+高攻击+高暴击+溅射效果!好!有了以上这些状态,冲脸肉搏去吧,记得开【战嚎】!在一群被减速的怪堆里肉搏都不带掉血的,喜欢狂战的玩家相信都是冲着这一时刻的爽快感而来的。

接下来说点不能站桩无脑输出的地方1、有法师怪混在其中的一堆怪2、有射手怪站在一堆怪的阴暗角落里3、精英怪4、块头巨大的普通怪5、自爆怪6、各种火焰陷阱、刀阵陷阱之类的地方就不说了,相信大家都被坑出翔来了,多死几次就长记性了!法师怪和射手怪,特点是血少但容易打出高伤害,即使你元素抗性高,依然扛不住!对付方法是:怪堆数量不算太多的时候,【暗影爆发】冲脸强杀,这时候你会发现它第一波技能往往会扔在了你冲刺之前的那个位置,甚至熟练后算好距离一下窜到了它背后,OK成功躲掉了,在它没放出第二波高伤害技能前,肯定斩于刀下了。

大部分法师技能的弹道,都是偏慢的,操作熟练,并且对怪物了解透彻的情况下,很容易躲技能,即使不小心挨了一下,这时候血量上限的作用就非常巨大了,你躺了还是吸血喝药救回来了,就看这一手了,以我8500的血量,普通小怪不可能有一招将我秒掉的情况。

远程射手的话有人会说,咱不是有冰盾吗?是的,我这里想说的是有些远程怪射出的箭,会在砸中目标后在地上留下个小圈,站在上面持续掉血很厉害,所以把它列在了不能站桩输出的地方。

总之遇到怪堆,一定要先杀掉法师和远程。

精英怪和块头巨大的怪,特点是皮糙肉厚,并且有蓄力一击能秒人哦!所谓蓄力一击,其实就是怪物把手高高举起来然后往你脸上砸下来,我曾经被打出过9000多的伤害直接挂掉。

根据经验,这类攻击往往有很明显的抬手动作,以及较长的时间约2秒左右。

什么?2秒太短,一不注意就被秒了?好吧。

我们还有个神技【战嚎】40%减速,这样一来2秒变3秒了吧,好好留意绝对砸不中人啊!冲刺一下就逃开老远了!精英怪亦是如此,减速状态下,通常可以让你从容的预判并躲开很多强力技能。

总之遇到大块头,就给个减速让他一边凉快去吧,反正他不会远程伤人,先去杀了法师和弓手,回头收拾他。

自爆怪我最痛恨这类怪,打完后尸体爆炸的就算了,死过就长记性了,打完马上冲刺逃开。

枯萎沼泽里有种绿色半透明的怪,自爆秒人妥妥的,我一般看见都懒得去打,只要注意它站着不动身体发光,并且光越来越亮,那就是要自爆了,赶紧离它远点吧!还有那种绿色的发光漂浮小球,一般成群出现,自爆后发出若干道绿色的线条,会自动追踪打到你身上,我这血量最多扛3下就见底了,遇见了也一定要注意啊,来不及清完就赶紧跑吧,别傻站着了,来不及吸血就挂掉了!还要说一说那矿洞副本里很常见的,手里举着个炸弹的机器矮人!个子小小的,混在一堆里,蓄力后扔个炸弹给你,轰的一下就挂了有木有!眼睛要擦雪亮啊。

好了,以上这些经验都是死了几遍长记性了总结出来的,暂时回想起这么点,欢迎补充!最后,火炬2不是网游,请别一路无脑A过去。

更多相关资讯请关注:火炬之光2专题[pagesplitxx]2012.10.14最近很多人回复说,一手极快+一手极慢,用100%处决玩法,依然会遇到时快时慢,没有办法保持卡极速处决的问题起初我还抱着怀疑的态度,因为我从2天前就开始这么晚了,一手爪一手剑(下面截图里有),玩了已经不下10几个小时了,一直保持着高速处决的效果,没有任何问题。

相关文档
最新文档