金属有机骨架材料(MOFs)(课堂PPT)

合集下载

MOFs材料介绍PPT幻灯片课件

MOFs材料介绍PPT幻灯片课件
金属-有机骨架材料(MOFs) ——多孔材料家族的新成员
1


一 MOFs材料简介 二 制备方法 三 文献阅读
2
一 MOFs材料简介
金属离子 配位
周期性网状骨架的多孔材料 自组装
有机配体
20世纪90年代中期,第一代MOFs材料被合成出来 孔径和稳定性受到一定限制
1999年,Yaghi等人合成具有三维开放骨架结构的MOF-5 去除孔道中的客体分子后仍然保持骨架完整
成核均匀,降低 晶化时间,形成 较小的晶体尺寸

19
三 文献阅读
(一)磁性微球fe3o4的制备 (二)fe3o4@sio2的制备
fe3Poha4s微e 1球
HCL
超声分散10min ,纯水洗涤三次
超声分散
加入乙醇,水混合溶液
加入氨水
超声均匀后加入硅酸乙酯
超声均匀
机械搅拌
乙醇,水,洗涤,真空干燥
20
内迅速升高。
微波 快速结晶
在微波辅助下,可以在较低温度下,较为温和的条件,较短的 时间内完成反应,晶体颗粒小。
17
制备方法——晶种法
通过蒸发或冷却化合物大的饱和溶液,生成单晶
反应条件温和,生成较好的单晶,便于单晶结构解析 缺点:时间长,且需反应物在室温条件下溶解性好。
18
制备方法——超声合成法
超声合成在于能使溶剂中不断地形成气泡 的产生,生长和破裂,即形成声波空穴。
13
ZIF
14
二 制备方法
原位 溶剂热法
……
超声合成法
晶种法
分层法
电化学微合波成法
15
制备方法——溶剂热法/水热法
金属盐 有机配体 溶剂混合

MOFs简介PPT演示课件

MOFs简介PPT演示课件
药物靶向
MOFs可以作为药物靶向载体,将药物定向输送到病变 部位,提高药物的靶向性和治疗效果。
04
mofs的前景
研究现状
国内外研究团队不 断壮大
基础研究与实际应 用探索并重
多样化的MOFs材料 合成和性质研究
发展趋势
新型MOFs材料探索与合成 MOFs材料在能源、环境、催化等领域的应用拓展
多学科交叉融合,推动MOFs材料发展
未来挑战
MOFs材料稳定性和可重复性 需要进一步提高
MOFs材料在实际应用中的效 率和性能仍需优化
需要加强多学科合作和产学研 转化
05
mofs的制备方法和改性
制备方法
溶剂热法
使用高温高压的反应釜,以有机溶剂作为反应介质,加热至一定 温度,使金属离子与有机配体相互作用形成MOFs。
气相沉积法
将金属前驱体和有机前驱体分别蒸发,在低温下相互碰撞,形成 MOFs薄膜。
01
MOFs是由金属离子或金属团簇作为节点,与多齿配体配位形
成的。
配位环境
02
MOFs中金属中心周围的配位环境通常由有机配体构成,这些
配体与金属中心形成各种几何构型。
网络结构
03
MOFs的网络结构由连接金属节点和有机配体的各种化学键合
构成,形成多孔三维结构。
化学特性
化学多样性
MOFs具有很高的化学多样性,可以通过改变金 属中心和有机配体来调节其化学性质。
制备与改性实例
1
通过溶剂热法制备了Cu-BTC MOFs,具有良好 的孔道结构和稳定性。
2
通过气相沉积法制备了MOF-5薄膜,具有良好 的透光性和化学稳定性。
3
通过溶液法制备了UiO-66 MOFs,具有较高的 比表面积和孔容。

金属有机骨架材料MOFs及其应用ppt课件.ppt

金属有机骨架材料MOFs及其应用ppt课件.ppt
• we choose MIL-101 as the stationary phase and xylene isomers and ethy-lbenzene (EB) as the targets for separation.
Gu, Z. Y. Yan, X. P. Angewandte Chemie-International Edition 49, 1477-1480 (2010)
Hydrogen Storage in Microporous rganic Frameworks
Rosi, N. L. Eckert, J. Eddaoudi, M. O'Keeffe, M.Yaghi, O. M. science 300, 1027-1029 (2003)
MOF-5的储氢性能
实验流程图
吸附性能
富集效果
105ppb
2030ppb
Metal–Organic Framework MIL-101 for HighResolution Gas-Chromatographic Separation of
Xylene Isomers and Ethylbenzene
• We show the first fabrication of the MOFcoated capillary column for high-resolution GC separation.
78K
298K
Rowsell, J. L. C. Spencer, E. C. Eckert, J. Yaghi, O. M. science 309, 1350-1354 (2005)
Metal Organic Frameworks as Adsorbents for Trapping and Preconcentration of Organic Phosphonates

MOFs材料简介 ppt课件

MOFs材料简介 ppt课件
22
此外,金属-有机骨架材料在近几年兴起的其它发 展方向包括: 对映异构体选择性催化,后合成修饰, 纳米微孔内的聚合反应,及磁性材料等。作为一种 新型的多功能分子基材料,金属-有机骨架材料在 性质上的有机-无机杂化特性、结构上的有序性、 可裁剪性以及微孔性,在合成上,有机配体和无机 金属单元的无穷的组合,都将是MOFs的学术研究及 工业开发的动力源泉,不久的将来必将在材料领域 占有一席之地。
4
定义
MOFs 的命名最早由Yaghi 于1995 年提出
金属-有机骨架材料(metal organic frameworks, MOFs) 是由含氧或氮的有机金属配体与金属离子自组装而形 成的一类具有周期性网状结构的多孔配位聚合物。
Yaghi OM, Li G, Li H.[J]. Nature, 1995, 78: 703-706.
Zhu QL, Xu Q. [J]. Chem Soc Rev, 2014, 43: 5468-5512.
5
MOFs的特点
MOFs具有合成方法多样、比表面积大、孔道和 化学性质可调等优点。
由于其这些特点,该材料主要应用于催化、传 感、药物输送和分离分析等领域
Furukawa H, Cordova KE, [J]. Science, 2013, 341(6149): 1230444.
MOFs
1

定义
贰 种类与合成

应用

前沿进展
2
精品资料
• 你怎么称呼老师? • 如果老师最后没有总结一节课的重点的难点,你
是否会认为老师的教学方法需要改进? • 你所经历的课堂,是讲座式还是讨论式? • 教师的教鞭 • “不怕太阳晒,也不怕那风雨狂,只怕先生骂我

MOF材料的研究进展PPT课件

MOF材料的研究进展PPT课件

生物甲烷过程由于兼具节能、减排、资源化三重战略意义,被誉为是“粪土变黄金, 化腐朽为神奇”的工程,近年来引起了社会的广泛关注。生物甲烷过程需要将生物 质发酵产生的沼气进行提纯,去除沼气中CO2 等气体,使甲烷浓度高于97%。如 何提高CO2 分离过程的效率,降低过程能耗,是目前研究领域的热点。作为21 世 纪最热门的材料之一,金属有机骨架材料(metal organic frameworks,MOFs) 被广泛认为是用于碳捕获和封存(CCS)过程最具前景的材料,近二十年来被广 为研究。
根据不同的核组成,将MOFs 为壳的核壳结构材料主要分为:单质金属/非金属@MOFs、 氧化物@MOFs和MOFs@MOFs。
Deng Y,Qi D,Deng C,et al. Journal of the American- Chemical Society,2007,130(1):28-29. 11
-
15
CO2的吸附热
吸附热是指气体吸附过程所产
出的热量,它代表了气体分子
与吸附材料表面作用力。材料 的CO2吸附热越大,说明CO2 与 吸附材料的作用力越强,选择
性就越好,同时脱附时所需的
能量代价也越高。因此好的吸
附材料应该具有一个合适的吸
附热。因此,吸附热一般会随 着CO2覆盖率的增加而减少。
-
-
10
HAQUE E,JUN J W,JHUNG S H. Journal of Hazardous Materials,2011,185(1):507-511.
金属有机骨架(MOFs)为壳的核壳结构材料研究进展
近年来,核壳材料的合成与应用研究成为材料领域的一大热点。从广义上说,核壳结构 材料是一种材料通过物理化学作用均匀地包覆在另一种材料表面形成的纳米尺度的有序 核壳结构,还包括空球、微囊等材料。通过裁剪核或壳的结构、尺寸,可以调控核壳材 料的吸附分离、催化、光学、磁学等性质,从而表现出异于单组分的核或壳的性能。核 壳结构材料按外壳来分,主要有金属/非金属类、非金属/金属的化合物类、分子筛类和 金属有机骨架类。然而,金属有机骨架为壳的核壳结构材料的研究至今相对比较少,还 不是很成熟,因此类核壳材料仍有很大的发展潜力。

金属-有机框架材料的光学性质及应用PPT优秀课件

金属-有机框架材料的光学性质及应用PPT优秀课件
26
20
(R)/(S)-1 和D-sorbitol 荧光滴定
2021/5/26
21
(R)-1 和(R)/(S)-CEA 荧光试验
NH2 *
1-CEA
2021/5/26
22
荧光增强倍数
2021/5/26
23
不同胺的手性识别
2021/5/26
24
结论
合成了手性笼状配合物 对糖和胺分子具有立体选择性
COOH
N
N
N
Ru
N
N N
COOH
2+
2C l-
2021/5/26
6
2.1 L* L
这种发光在金属配合物中最常见,也是最主要的。
W. B. 2021/5/26 Lin* J. Am. Chem. Soc. 2014, 136, 5213−5216
7
2.2 M* M
➢ 配体的π→π*跃迁被激发
➢ 金属离子M 使得金属离子被激为M*
Y. 2021/5/26 B. Dong* J. Am. Chem. Soc. 2007, 129, 10621
13
溶剂小分子荧光猝灭
2021/5/26 Kuei-Fang Hsu* Inorg. Chem. 2010, 49, 2316–2324
14
四 、MOF的光学应用
A Highly Fluorescent Chiral Cage of Metallosalalen for Enantioselective Recognition and Sensing
金属-有机框架材料的光 学性质及应用
2021/5/26
安徽工业大学 配位化学
2014年10月

金属有机骨架材料MOFsppt课件.pptx

金属有机骨架材料MOFsppt课件.pptx

In recent years, the number and diversity of MOF structures have grown significantly, and many water-stable and thermally stable MOFs now exist, Enabling an exciting expansion of their application. Depending on the application envisaged, different functional stabilities e important.
Connectivity of Zr6 nodes in zirconiumbased metal–organic frameworks and
the associated carboxylate molecules
required to link nodes together.
2
Thermal stability
3 MOF stability in catalytic systems
The chemical (acid–base) stability of some representative metal–organic frameworks based on literature data. The bar length indicates the pH range that the metal–organic frameworks (MOFs) can tolerate. An arrow indicates that the MOF can withstand pH<0 or pH>14.
Some arrangements of linkers and connectors render MOFs more resistant to deformation and destruction than others. Some computational studies show that mechanical stability tends to be enhanced with shorter linkers. An important practical development that greatly reduces the mechanical performance requirements for MOFs in applications.

金属有机骨架材料(MOF)的分类课件

金属有机骨架材料(MOF)的分类课件

要点二
详细描述
为了拓展MOFs的应用领域,提高其功能化程度至关重要 。目前,研究者们正在致力于开发具有特定功能的MOFs ,如催化、吸附、光学等,以满足不同领域的需求。同时 ,还需要深入研究MOFs的功能化机制,为其未来的发展 提供理论支持。
中度功能化MOFs
功能化程度适中,适用于中等复杂吸附和分离。
高度功能化MOFs
功能化程度较高,适用于复杂吸附和分离以及催化反应等应用。
03
MOFs的应用领域
气体储存和分离
由于MOFs具有高比表面积和可调的孔径,它们被广泛应用于气体储存和分离领 域。
MOFs可以用于储存氢气、甲烷等清洁能源气体,提高能源的储存密度。同时, MOFs也可以用于分离工业气体,如二氧化碳、乙烯等,提高产品的纯度。
催化反应
MOFs具有高比表面积和可调的孔径,可以作为催化剂的载 体,提高催化反应的效率和选择性。
MOFs可以用于催化有机反应、光催化反应和电化学反应等 ,如烷基化反应、氧化反应和加氢反应等。这些反应在化工 、制药和新能源等领域具有广泛的应用前景。
药物传递和释放
MOFs具有可调的孔径和结构,可以用于药物传递和释放 ,实现药物的精准控制。
孔径大小类型MOFs的特点
大孔径MOFs
孔径大于10 Å,适用于大 分子物质的吸附和分离。
中孔径MOFs
孔径在5-10 Å之间,适用 于中小分子物质的吸附和 分离。
小孔径MOFs
孔径小于5 Å,适用于小分 子物质的吸附和分离。
功能化程度类型MOFs的特点
低度功能化MOFs
功能化程度较低,适用于简单吸附和分离。
拓扑结构类型MOFs的特点
八面体型
以八面体作为基本结构单元,形成的 MOFs具有较高的比表面积和孔容, 适用于气体储存和分离。

金属有机骨架材料(MOFs)PPT精选文档

金属有机骨架材料(MOFs)PPT精选文档
Although there is no standard method for assessing the stability of MOFs in acidic, basic or neutral solutions, it is often judged by comparing the powder Xray diffraction (PXRD) pattern of a MOF before and after soaking it in a given aqueous solution.
7
2
Stability of metal–organic frameworks
8
Stability is defined as resistance of the structure to degradation. However, another possible definition is thermodynamic in origin: many functionally stable MOFs (as well as zeolites) are thermodynamically unstable with respect to alternative — typically, denser — polymorphs. An active area of MOF research is the development of routes to thermodynamically unstable, but functionally stable, polymorphs.
Metaembers:Cao Chang Fu Chu Xian
Reporter: Du Meng Yuan
1

金属有机框架(MOFs)的合成和应用精选课件

金属有机框架(MOFs)的合成和应用精选课件

3
•1 Introduction
4
Introduction
Synthetic Chemistry of Materials
5
more than 20,000 different MOFs
Introduction
Synthetic Chemistry of Materials
Properities:
Enveirnoenrmgyencrtispiosllution
WWee Nalesoed
Need
Raemnaetweraiabllteo reensetorrgeyi!t!
1
Metal Organic Frameworks
(MOFs)
Team members:
Qin Meng Gai Linlin Zhou Jinling Du Yina
water and organic
Solvothermal Method
Aqueous solution of metal
J. Choi, G. Gillan Edward. Inorg.Chem. 2005, 44, 7385.
Layering Method
11
Microwave assisted method
MOF-5
(1) Dipole rotation
(2) Collision takes place
(2) Local heating
energy efficiency
12
Microwave assisted method
crystallinity and morphology of MOF-5
Conventional heating was used for comparison.

金属有机框架MOFs的合成和应用 ppt课件

金属有机框架MOFs的合成和应用 ppt课件
water and organic
Solvothermal Method
Aqueous solution of metal
Layering Method
J. Choi, G. Gillan Edward. Inorg.Chem. 2005, 44, 7385.
Microwave assisted method
Ye Ting Song Yixuan Mo Jiamei Liu Yongying Li Qianru Sun Tian
1 Introduction
CONTENT
Synthetic Chemistry of Materials
2 Synthesis of MOFs 3 Application of MOFs
Layer-by-Layer Method
Fig. 2 Layer-by-layer growth of HKUST-1 thin films on COOH-terminated support.
The substrate is repeatedly immersed in solutions of Cu(OAc)2 and H3BTC, with an intermediate washing between successive steps.
THANK YOU!
22
•3 Application
Application of
MOFs
Molecular Transport
• Large surface tension • Big porous
Devices
• actuators; • Sensors; • targeted drug injection • osmotic pumping

奇妙的金属有机骨架材料PPT课件

奇妙的金属有机骨架材料PPT课件
02
MOFs具有高比表面积、高孔隙 率、可调的孔径和功能性强的特 点,在气体储存、分离、催化等 领域具有广泛的应用前景。
研究背景
随着能源和环境问题的日益严重,对 高效、低成本的气体储存和分离技术 的需求不断增加。
MOFs作为一种新型多孔材料,在气 体吸附和分离领域具有巨大的应用潜 力,成为当前研究的热点。
智能化发展
探索金属有机骨架材料的智能 化应用,如传感器、存储器等

07 结论
研究成果总结
结构多样性
金属有机骨架材料(MOFs)具有高度可调的孔径和结构, 这使得它们在气体储存、分离和催化等领域具有广泛的应用。
高比表面积
MOFs具有极高的比表面积,这意味着它们具有更大的表 面活性位点,有利于反应物的吸附和催化反应的进行。
详细描述
根据节点金属和有机配体的不同,MOFs可分为多种类型,如基于Zn、Cu、Co等金属的MOFs。合成 方法通常是在一定温度和压力下,将金属盐和有机配体在溶剂中加热反应,生成MOFs晶体。此外, 还有气相沉积法、电化学法等合成方法。
应用领域与前景
总结词
MOFs在气体储存、分离、催化等领域具 有广泛的应用前景,未来发展方向包括 提高材料稳定性、实现规模化应用和拓 展应用领域等。
在药物传递与生物医学方面的应用
总结词
精准、高效
详细描述
金属有机骨架材料可以作为药物载体,实现 药物的精准传递和释放。它们能够控制药物 释放的速度和部位,提高药物的生物利用度
和治疗效果。
在光电领域的应用
总结词
高性能、多功能
详细描述
金属有机骨架材料具有优异的光电性能和可调的电子结 构,可应用于太阳能电池、发光二极管和光电探测器等 领域。它们能够提高器件的效率和稳定性,并实现多功 能集成。

金属有机骨架化合物的合成、制备、应用简介PPT演示课件

金属有机骨架化合物的合成、制备、应用简介PPT演示课件
14
制备方法——溶剂热法
MOF-5
自组装膜
基底Au
设备简单
对合成条件敏感
自组装层影响膜性能
15
制备方法——晶种法
把晶体的成核和生长过程分离开 → 更好地控制晶体的生长和膜的微结构
16
制备方法——晶种法
ห้องสมุดไป่ตู้
MOF晶种——α-磷锌 矿
晶膜制备
晶体合成 功能化
三维表面成膜
选择性催化
Paolo Falcaro 等人发现纳米结构的α-磷锌矿微粒具有促使MOF-5成核的
8
1 含氮杂环有机配体MOFs 常见的含氮杂环配体吡啶、2,2’-联吡啶、4,4’-联吡
啶等,均为中性配体。例如,S.Noro等人采用4,4’- 联吡 啶,与Cu2+以及AF6型阴离子(A=Si,Ge,P)的体系中合成了 系列MOFs。但中性配体合成的骨架稳定性较差,在客体分子 排空后,结构容易产生坍塌,从而失去原有的孔隙。
6
次级构造单元(SBU),如果能将金属中心键合在螯合 点上而不是在单齿配位点上,则不仅因为非常强的螯合效应 而使网络结构的稳定性大大提高,而且可能产生少的网络拓 扑形式,这样在骨架结构的设计与合成中就能够有更大的预 测性和控制性。
SBU通过有机单元连接羧基的碳原子而形成网状的MOFs
7
MOFs的配体类型
金属有机骨架材料简介(MOFs)
闫新秀 2013.05.21
1
金属有机骨架化合物 (MOFs,Metal-Organic Framworks) 是近十几年来配位化学发展得最快的一个方向, 是一个涉及无机化学、有机化学和配位化学等多学 科的崭新科研课题。在MOFs研究中需要对配位化合 物的结构、配位方式、孔道大小等进行表征, 要求 在合成过程中得到适合测试X射线单晶衍射的晶体, 增加了MOFs合成的难度。在此之前, 配位聚合物的 相关研究已经进行得比较深入。正是在对配位聚合 物的框架结构进行研究的时候逐渐衍生了MOFs的相 关研究领域。

金属有机骨架材料MOF的分类ppt课件

金属有机骨架材料MOF的分类ppt课件

ZIF材料
ZIF,即类沸石咪唑酯骨架材料,是利用Zn(Ⅱ)或Co(Ⅱ)与咪唑配体反应,合成出的类沸石结构的MOF材料。
Bo Wang, Adrien P. Coˆte´, Hiroyasu Furukawa, Michael O’Keeffe& Omar M. Yaghi. Nature, 2008,(453)207.
18
ቤተ መጻሕፍቲ ባይዱ
Conclusions
The CH4 adsorption isotherms for four different initial structures of ZIF-8 at 298 K have been computed using GCMC simulations with the proposed force field adsorption isotherms for four gases such as CH4, H2, CO2 and N2 at different temperatures were computed using GCMC simulation and were found to be in a good agreement with the experimental data.
CPL系列材料
CPL材料的结构由六配位金属元素与中性的含氮杂环类的2,2’-联吡啶、4,4’-联吡啶、苯酚等配体配位而成。 其中的四个配位位置是金属和吡嗪类羧酸配体链接而成的二维平面结构,剩下的两个位置是金属与线形二 齿有机配体配位形成。
Angew. Chem. Int. Ed. 1999, 38, No. 1-2,140-143
The methane molecule using the Transferable Potentials for Phase Equilibria United Atom (TraPPE-UA) force field, in which CH4 is modeled as a single, uncharged LJ sphere located on the carbon atom. For the ZIF atoms, we use LJ parameters taken from the Optimized Potentials for Liquid Simulations All Atom (OPLSAA) force field, UFF for Zn. GCMC →Complex Chemical Systems (MCCCS) Towhee program. Binding energies → Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS)
  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
9
Stability of metal–organic frameworks
ห้องสมุดไป่ตู้
1
Chemical stability
2
Thermal stability
3
Hydrothermal stability
4
Mechanical stability
10
1
Chemical stability
The greatest concerns for the improvement of MOF chemical stability have been largely related to liquid water and water vapour; accordingly, we focus on aqueous solutions. In most MOF structures, the chemical weak points are at the nodes — more specifically, the metal–linker bonds — with hydrolysis yielding a protonated linker and a hydroxide(or water) ligated node. Acidic solutions can accelerate the formation of the former, and basic solutions can accelerate the formation of the latter.
Framework catenation — more specifically, interpenetration or interweaving of networks — can enhance stability through favourable framework–framework interactions.
Experimentally, hydrothermal stability is assessed by exposing MOFs to steam at various pressures and temperatures, followed by PXRD analysis and porosity or surface-area measurements.
13
Connectivity of Zr6 nodes in zirconiumbased metal–organic frameworks and the associated carboxylate molecules required to link nodes together.
14
2
Thermal stability
Some arrangements of linkers and connectors render MOFs more resistant to deformation and destruction than others. Some computational studies show that mechanical stability tends to be enhanced with shorter linkers. An important practical development that greatly reduces the mechanical performance requirements for MOFs in applications.
16
4
Mechanical stability
MOFs are known for their extraordinary porosity — an attribute that inherently decreases mechanical stability. Therefore, as expected, MOFs are less mechanically stable than zeolites. This instability can manifest itself as phase changes, partial collapse of pores or even amorphization, in response to mechanical loading.
11
The chemical (acid–base) stability of some representative metal–organic frameworks based on literature data. The bar length indicates the pH range that the metal–organic frameworks (MOFs) can tolerate. An arrow indicates that the MOF can withstand pH<0 or pH>14.
3 MOF stability in catalytic systems
4 Future perspectives
3
1
Introduction
4
Metal–organic frameworks (MOFs) are a scientifically compelling and functionally evolving class of meso-, micro- and ultramicroporous materials. MOF structures encompass dozens of topologies, including several, such as sodalite and Rho, that are also well known for zeolites. MOFs have been explored for many applications including, but not limited to, gas storage and release, chemical separations, drug delivery, catalysis, light harvesting and energy conversion, and, recently, the degradation of toxic substances such as chemical warfare agents
12
Selected sections of representative metal–organic framework materials a | ZIF-8 b | Cu-BTTri c | MIL-53(Al) d | MIL-101(Cr) e | PCN-426-Cr(iii) f | [(CH3)2NH2]2 [Eu6 (μ3OH)8(1,4-NDC)6(H2O)6].
Thermogravimetric analysis (TGA) and in situ PXRD are both techniques that can be used to gauge the thermal stability of MOFs.
15
3
Hydrothermal stability
7
2
Stability of metal–organic frameworks
8
Stability is defined as resistance of the structure to degradation. However, another possible definition is thermodynamic in origin: many functionally stable MOFs (as well as zeolites) are thermodynamically unstable with respect to alternative — typically, denser — polymorphs. An active area of MOF research is the development of routes to thermodynamically unstable, but functionally stable, polymorphs.
MOF hydrothermal stability can be enhanced by intermolecular or intramolecular forces, such as internal hydrogen bonding or π stacking.ZIFs as a class comprise excellent examples of hydrophobic MOFs, and many ZIFs are hydrothermally stable, making them reasonable candidates for use in humid conditions.
5
MOFs are composed of metal nodes and organic linkers that can be systematically tuned in terms of chemical composition and precise arrangement— an attribute that differs from purely inorganic zeolites,which consist largely of silicon or aluminium ions linked by oxygen atoms.
Thermal degradation of MOFs is,in most cases, a result of node–linker bond breakage, accompanied or followed by linker combustion. As a consequence, thermal stability is generally related to node–linker bond strength and the number of linkers connected to each node.
相关文档
最新文档