塑胶原料色母色粉检验规范

文件名称 Doc. Name
文件编号 Doc. Ref.
卓懿高塑胶五金（深圳）有限公司
ZAE PLASTIC METAL (SHENZHEN) CO., LTD
塑料原料、色母、色粉检验规范 Plastic raw material, color master batch, pigment
Inspection Specification
文件名称 Doc. Name
文件编号 Doc. Ref.
卓懿高塑胶五金（深圳）有限公司
ZAE PLASTIC METAL (SHENZHEN) CO., LTD
塑料原料、色母、色粉检验规范 Plastic raw material, color master batch, pigment
Inspection Specification
No.
Characteristic 特征
Method 方法
Instrument Байду номын сангаасevel AQ
工具
水平
L
料的符合性 Raw material conformity：
a. 原材料牌号（代号）、供应商名称、颜色
代码等是否同要求一致。
Check the raw material code, supplier
3.0 Inspection instruction 检验规范 3.1 检验内容如下 Inspection contents as below： 3.1.1 原材料的符合性 Raw material conformity： 检查原材料牌号（代号）、供应商名称、颜色代码等是否同要求一致，检查并记录原 材料批号或生产日期。 Check the raw material code, supplier name, color code etc. are conform with requirement or not, check and record the batch code of raw material or production date. 检查供应商每批提供检测报告或具有相同作用的检验记录是否与来料一致，(首次来料 检查是否有 MSDS 报告，SGS 报告，后续须定期检查是否 MSDS 报告，SGS 报告过 期). Check if the inspection test report or inspection record which supplier provided for each batch is conform with incoming or not, (The first incoming need check if there is MSDS, SGS report, need regularly check if MSDS,SGS report are overdue or not in sequel).
版次 Version
页次 Page
A.1
Page 1 of 3
QC-II-002
制定日期 Drafted Date
2010-03-01
修订日期 Modified Date
2010-04-28
1.0 Purpose 目的 对采购的塑料原料、色母、色粉的进货检验工作进行规范。 Standardize the incoming inspection for purchasing plastic raw material, color master batch and pigment.
pigment exclusion）, then draw out the
Control for batch 批控制
手试 Manual
5 包/批
5
0
bags/batch
palm, no attached bead or feel humidity.
3.1.3 原材料外观 Raw material appearance： 打开包装袋封口在光源充足处目视检查，原料中不能有肉眼可见的黑点、杂质等；原 料颗粒的大小、形状应基本一致（切片允许有少量不规则）。颜色同保留样品一致。 Open the packaging and check the material with visual at light place, the black dot, impurity etc. can not be seen in raw material; the grain of material is uniform, the shape is almost conformity (Allow there is a little abnormity for slice). The color is conform with retained sample.
abnormity for slice). b．颜色同保留样品一致。
The color is conform with retained
sample.
手试 Manual test：
将手插入原料颗粒中（色粉除外），抽出手
4
掌，不能有附着的水珠或潮湿感。 Insert the hand in the raw material（the
3.1.2 包装要求 Packaging requirement： 所有原材料的包装必须完好无损（常见缺陷有破损、水浸等）。 The packaging of raw material is good and no broken (The familiar defect include broken, waterlogging etc).
seen in raw material; the grain of material Control for batch
is uniform, the shape is almost
批控制
Visual 目视
5 包/批 5
bags/batch
0
conformity (Allow there is a little
The packaging is good and no broken.
批控制 Control for batch
目视 Visual
100%
外观 Aesthetics
a. 原料中不能有肉眼可见的黑点、杂质等；
原料颗粒的大小、形状应基本一致（切片
允许有少量不规则）。
3
The black dot, impurity etc. can not be
1
name, color code etc. are conform with
requirement or not. b. 检测报告或检验记录是否与来料一致。
Check if the inspection test report or
批控制 Control for batch
目视 Visual
100%
3.2 抽样方法 Sampling methods：
塑胶原料的检验以袋(25KG/袋)为单位，色母、色粉以包为单位。
The inspection unit is bag (25kg/bag) of plastic raw material, the inspection unit is
package of color master batch and pigment.
版次 Version
页次 Page
A.1
Page 2 of 3
QC-II-002
制定日期 Drafted Date
2010-03-01
修订日期 Modified Date
2010-04-28
3.1.4 手试 Manual test: 将手插入原料颗粒中（色粉除外），抽出手掌，不能有附着的水珠或潮湿感。 Insert the hand in the raw material（the pigment exclusion）, then draw out the palm, no attached bead or feel humidity.
inspection record is conform with
incoming or not. c. 原材料批号或生产日期记录
Check and record the batch code of raw
material or production date.
包装： Packaging 2 包装必须完好无损。
2.0 Scope 范围 适用于采购的用于正常生产的所有塑料原料、色母、色粉的进货检验。(以下所述的原材料均 包括塑料原料、色母、色粉。) Apply to all incoming inspection of plastic raw material, color master batch and pigment which be purchased for normal production. (The raw material includes plastic raw material, color master batch and pigment in hereinafter.)