法国螺栓标准(NF bolt standards)
法国吊钩标准NFhookstandards汇总
NF E52-034-1987
E52-037-2-2000
NF E52-037-3-2001
吊索用元部件.安全.第 (Components for slings - Safety - Part 3 : forged 3 部分:8 级锻钢制自锁 steel self-locking hooks - Grade 8.) 紧吊钩 吊索元件.安全性.第 5 部分:有闩锁的锻压钢 提升钩,4 级 起重配件.L 级螺纹竖 钩环 起重配件.S 级的直钩 环 起重配件.S 级的竖钩 环 (Components for slings - Safety - Part 5 : forged steel lifting hooks with latch - Grade 4.) (Lifting accessories. Screwed bow shackles. Grade L.) (LIFTING APPLIANCES. SCREWED DEE SHACKLES. GRADE S.) (LIFTING APPLIANCES. SCREWED BOW SHACKLES. GRADE S.)
(PULLERS WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 1 : GENERAL.) (PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 2 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BORACHES OF DIAMETERS 6 TO 25.) (PULLERS WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 3 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 28 TO 32.) (PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 4 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 36 TO 40.) (PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 5 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 45 TO 50.) (PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 6 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 56 TO 63.) (PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 7 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 70 TO 80.) (Internal broaching tools. Pull ends.) (Internal broaching tools. Tail ends.) (ASSEMBLY TOOLS FOR SCREWS AND NUTS.HOOK WRENCHES) (Railway transport equipment. Coupling hooks of 1 mn.)
法国nf标准
NF是法国标准的代号，1938年开始实行，其管理机构是法国标准化协会（AFNOR）。
法国每3年编制一次标准制修订计划，每年进行一次调整。
法国标准化协会指导17个大标准化规划组（GPN）的技术工作，指导其与规划委员会（COP）的工作进行协调。
每一个规划组有一个战略方针委员会（COS）指导工作，它集中了相关经济领域的决策者，还负责确定优先开展的工作，参与寻找资助。
NF标志是证明产品符合法国批准标准的一种法定质量符号，NF是权威的自愿性法国产品安全认证标志，在法国有90%以上的认可度。
法国螺栓标准(NF bolt standards)
NF E25-800-1-1994
NF E25-800-2-1994
NF E25-800-3-1994
NF E25-800-4-1994
NF E27-000-1972 NF E27-312-1959 NF E27-313-1959
商业性通用螺栓制造.圆 (CHEESE BOLTS.) 柱头粗制或精制螺栓
紧固件.螺栓和螺钉的自 (Fasteners. Clearance hole for bolts and screws.) 由尺寸孔 (Mechanical properties of 碳钢合金制成的紧固件的 fasteners made of carbon steel 机械性能.第 1 部分:螺栓、 and alloy steel - Part 1 : bolts, 螺钉和螺柱 screws and studs.) (FASTENERS. SURFACE DISCONTINUITIES. PART 1 : SCREWS AND 紧固件.表面不连续性.第 BOLTS, FOR GENERAL 1 部分:一般要求的螺栓、 STUDS REQUIREMENTS. 螺钉和螺柱 (EUROPEAN STANDARD EN 26157-1).) (FASTENERS. SURFACE DISCONTINUTIES. PART 3 : 紧固件.表面不连续性.第 BOLTS, SCREW AND STUDS SPECIAL 3 部分:特殊要求的螺栓、 FOR REQUIREMENTS. 螺钉和螺柱 (EUROPEAN STANDARD EN 26157-3).) (Mechanical properties of 不锈钢紧固件耐腐蚀的机 corrosion-resistant 械特性.螺栓,螺丝和双端 stainless-steel fasteners. Part 1 : 螺栓 bolts, screws and studs.) (MECHANICAL PROPERTIES OF FASTENERS. PART 7 : 紧固件的机械性能.第 7 部 TORSIONAL TEST AND 分:公称直径 1-10mm 的螺 MINIMUM TORQUES FOR 栓和螺钉的扭力试验和最 BOLTS AND SCREWS WITH 小扭矩 NOMINAL DIAMETERS 1 MM TO 10 MM. (EUROPEAN STANDARD EN 20898-7).) 六角头螺栓.产品等级 A (Hexagon head bolts - Product grades A and B.) 和B 紧固件.六角头螺栓.B 级、 (Fasteners. Hexagon head bolts.
法国接头标准
焊接无损检验.焊接接头射线照相检验
(Non-destructive examination of welds - Radiographic examination of welded joints.)
NF A89-511-1998
焊缝的无损检验.焊接接头的X射线照相检验.验收等级
NF A82-104-1-2000
电阻焊接设备.电极接头,外锥度1:10.第1部分:圆锥形接头,锥度1:10
(Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1 : conical fixing, taper 1:10.)
NF A89-240-1987
焊接和有关技术.电阻点焊、凸焊或缝焊搭接接头.带解释的缺陷分类
(WELDING AND ALLIED PROCESSES. RESISTANCE SPOT,PROJECTION AND SEAM WELDED LAP JOINTS. CLASSIFICATION OF DEFECTS WITH EXPLANATORY COMMENTS.)
NF A87-013-3-2001
焊接和相关工艺.接头预处理的推荐方法.第3部分:铝和铝合金的金属焊条惰性气体保护焊和钨极惰性气体保护焊
(Welding and allied processes - Recommendations for joint preparation - Part 3 : metal inert gas welding and tungsten inert gas welding of aluminium and its alloys.)
NF 法国国家标准目录
NF 法国国家标准目录-第20页NF A 04.102-2003 晶粒度显微检验Steels - Micrographic determination of theapparent grain size1448NF A 05.150-1985 钢铁产品显微照相检查技术Steel products. Techniques of micrographic examination.931NF A 05.152-1984 钢产品用强无机酸的低倍检查Steel products. Macroscopic examination byetching with strong mineral acids290NF P 43.011-1985 建筑物的阀门不可控制范围内的不同压力的CB电动机起动器一般技术指标valves and taps for water supply in buildings CBdisconnectors with different Non controllablepressure ranges general technical Specifications782NF EN ISO 262-1999 螺钉,螺栓和螺母的选择尺寸General purpose metric screw threads -Tolerances210NF EN 571.1-1997 无损检验渗透探伤法检验第1部分一般原则Non-destructive testing - Penetrant testing - Part 1. General principles1007NF EN 895-1995 金属材料焊接的破坏性试验横向拉伸试验Destructive tests on welds in metallic materials. Transverse tensile test463NF EN ISO 898.1-1999碳钢和合金钢制紧固件的机械性能第1部分:螺栓、螺钉和双头螺栓Mechanical properties of fasteners made of carbonsteel and alloy steel -- Part 1: Bolts, screws andstuds2752NF EN ISO 898.5-1999 横向拉伸试验Mechanical properties of fasteners made of carbonsteel and alloy steel -- Part 5: Set screws andsimilar threaded fasteners not under tensilestresses796NF EN ISO 910-1996 金属材料焊接的破坏性试验弯曲试验Destructive tests on welds in metallic materials - Bend tests744NF EN ISO 965.2-1998 公差General Purpose Metric Screw Threads -Tolerances - Part 2: Limits of Sizes for GeneralPurpose External and Internal Screw Threads -Medium Quality806NF EN 1043.1-96 金属材料焊接的破坏性试验硬度试验第1部分电弧焊接头的硬度试验Destructive Tests on Welds in Metallic MaterialsHardness Testing Part 1: Hardness Test on ArcWelded Joints544NF EN ISO 2081-2008 金属覆盖层镍＋铬和铜＋镍＋铬电镀层Metallic and other inorganic coatings.Electroplated coatings of zinc with supplementary treatments oniron or steel1443NF EN ISO 3452.2-2007 无损检验渗透剂检验第2部分渗透剂材料试验Non-destructive testing - Penetrant testing - Part 2:Testing of penetrant materials2459NF EN ISO 3452.3-2007 无损检验渗透剂检验第3部分校准试验块Non-destructive testing - Penetrant testing - Part 3:Reference test blocks512NF EN ISO 3452.4-2007 无损检验渗透剂检验第4部分设备Non-destructive testing - Penetrant testing - Part 4:Equipment629NF EN ISO 3506.1-1998 耐腐蚀不锈钢紧固件的机械性能第1部分：螺栓、螺钉和螺柱Mechanical properties of corrosion-resistantstainless steel fasteners -- Part 1: Bolts, screwsand studs1920NF EN ISO 3506.2-1998 抗腐蚀不锈钢紧固件的机械性能第2部分Mechanical properties of corrosion-resistantstainless-steel fasteners -- Part 2: Nuts1560NF EN ISO 3506.3-1997 抗腐蚀不锈钢紧固件的机械性能第3部分Mechanical properties of corrosion-resistantstainless-steel fasteners -- Part 3: Set screws andsimilar fasteners not under tensile stress1258NF EN ISO 4759.1-2005 紧固件公差.第1部分:螺栓、螺钉和垫圈和螺母.产品等级A和CTolerances for fasteners -- Part 1: Bolts, screws,studs and nuts -- Product grades A, B and C1852NF EN ISO6157.2-1995紧固件表面不均匀性Fasteners -- Surface discontinuities -- Part 2: Nuts 702NF EN ISO 6506.1-2006 金属材料布氏硬度试验第1部分试验方法Metallic materials - Brinell hardness test - Part 1:Test method982NF EN ISO 6506.2-2006 金属材料布氏硬度试验第2部分试验机器的认证和校准Metallic materials - Brinell hardness test - Part 2:Verification and calibration of testing machines838NF EN ISO 6506.3-2006 金属材料布氏硬度试验第3部分参考块的校准Metallic materials - Brinell hardness test - Part 3:Calibration of reference blocks563NF EN ISO 6506.4-2006 金属材料布氏硬度试验第4部分硬度值表Metallic materials - Brinell hardness test - Part 4:Table of hardness values339NF EN ISO 6507.1-2006 金属材料维氏硬度试验第1部分试验方法Metallic materials - Vickers hardness test - Part 1:Test method961NF EN ISO 6507.2-2006 金属材料维氏硬度试验第2部分试验机器的认证和校准Metallic materials - Vickers hardness test - Part 2:Verification of testing machines1039NF EN ISO 6507.3-2006 金属材料维氏硬度试验第3部分参考块的校准Metallic materials - Vickers hardness test - Part 3:Calibration of the reference blocks777NF EN ISO 6507.4-2006 金属材料维氏硬度试验第4部分硬度值表Metallic materials - Vickers hardness test - Part 4:Tables of hardness values635NF EN ISO 6508.1-2006 金属材料洛氏硬度试验第1部分试验方法Metallic materials - Rockwell hardness test - Part1: Test method1300NF EN ISO 6508.2-2006 金属材料洛氏硬度试验第2部分试验机器的认证和校准Metallic materials - Rockwell hardness test - Part2: Verification and calibration of testing machines1292NF EN ISO 6508.3-2006 金属材料洛氏硬度试验第3部分参考块的校准Metallic materials - Rockwell hardness test - Part3: Calibration of reference blocks884NF EN ISO 7438-2005 金属材料弯曲试验Metallic materials - Bend test 411 NF EN ISO 8493-2004 金属材料管材扩口试验Metallic materials - Tube - Drift-expanding test 285NF EN ISO10484-2004螺母扩孔试验Widening test on nuts 370 NF EN ISO10485-2004螺母锥形保证载荷试验Cone proof load test on nuts 317NF EN 12223-2000 无损检验超声波检验1号校准块规范Non-destructive testing. Ultrasonic examination. Specification for calibration block No.1376NF EN10216.2.A2-2007 承压用无缝钢管交货技术条件Seamless steel tubes for pressure purposes -Technical delivery conditions - Part 2: Non alloyand alloy steel tubes with specified elevatedtemperature properties; German version3074NF EN10217.1.A1-2005 承压用焊接钢管规定室温性能的非合金钢管Welded steel tubes for pressure purposes -Technical delivery conditions - Part 1: Non-alloysteel tubes with specified room temperatureproperties362NF F 18-001-1988 铁路运输车辆.锰钢磨耗板.性能.焊接规定Rolling stock. Wearing plates made ofmanganeses steel. Characteristics. Welding prescriptions950NF F 19-290-2002 铁路设施保护和装饰用的室外涂料系统Railway applications - Outdoor paint systems for conservation and ornementation1380NF E 25.100.0-92 Mechanical properties of fasteners made ofcarbon steel and alloy steelMechanical properties of fasteners made of carbonsteel and alloy steel1666NF E 25.400.0-93 Mechanical properties of corrosion-resistantstainlessMechanical properties of corrosion-resistantstainless983NF E 25-135-1986 固定部件。
美国螺栓标准(ANSI bolt standards)
ANSI/ASTM F1142-1990
半埋入式防油、防水、螺栓连接人孔盖组件规范
Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight
ASTM A 183-2003
碳素钢制轨条螺栓和螺母的标准规范
Standard Specification for Carbon Steel Track Bolts and Nuts
ASTM A 193/A193M-2007
高温或高压设备及其他特殊用途的合金钢和不锈钢螺栓连接材料用标准规范
Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications
米制重型六角头结构螺栓,正误表
(Metric heavy hex structural bolts; Errata)
ASME B18.2.3.7M-1979
米制加重六角头结构螺栓
(Metric heavy hex structural bolts)
ASME B18.5-1990
英制圆头螺栓
(Round head bolts (Inch series))
Bolts, Metric Round Head Square Neck
6：法国通用技术规范／法标规范／欧标规范4分册4卷钢铆钉
就目前而言，标准NF E-27.711正处于公共调查中，其目的在于应标记委员会的要求，
DTRF 修订版
13
将下面两项整合进去： - 镀层螺栓； - 无头垫片螺栓；
在该工作范围内向工作组成员介绍该项目，便于他们讨论。
1. 正文介绍：
1.1 一般原则 根据制定第4分册-第3卷的部际指令规定，介绍的正文主要以AFNOR标准为基础：
旨在明确行政工程施工供应时实施AFNOR标准的条件。 实际上，在这里，我们会向公共工程设计常设团组的主席再次提到第4分册-第3
卷的陈述报告那段： «如果求助于一个特别的C.P.C，该C.P.C 完整而详细地处理了原文中的问题（即使其注释
- NF E-27.701：钢结构施工用紧固螺栓。技术说明。 (受保护或未被保护的螺栓)
- NF E-27.702：钢结构施工用紧固螺栓。螺栓的使用性能试验。
- NF E-27.703：钢结构施工用紧固螺栓。螺栓交货的一般条件及技术条件。
- NF E-27.711：钢结构施工用紧固螺栓。六角头法兰螺栓。尺寸大小及允许偏差。 未被保护的螺栓 。
层或未镀层螺栓）。 第5条
订购及文献
* 根据一般技术条款第 24.6及24.7条规定，不属于承包方的承担的费用有：
- 与业主方验收人员有关的费用， - 监理方要求的并且在该分册中未预计的补充试验的相关费用。 ** 生产商需要遵守的条件，尤其是，由NF.- 紧固螺栓（hr螺栓）国际标识的特殊条例 来对支配加工检测的方式进行规定，可在法国标准化协会（AFNOR）处咨询该条例， AFNOR地址：Tour EUROPE, Cedex 7-92080 Paris La Défense
法国螺钉标准(NF screw standards)
编号中文名称英文名称NF B51-128-1993纤维板.螺钉轴向抽出阻力的测定(FIBREBOARDS. DETERMINATION OF RESISTANCE TO AXIAL WITHDRAWAL OF SCREWS. (EUROPEAN STANDARD EN 320).)NF B51-260-1972木屑板.螺丝拔除试验(PARTICLE BOARD. TEST FOR WITHDRAWAL OF SCREWS.)NF C20-115-1971标定截面不超过2.5mm**2，线芯无特殊预加工的硬铜导线连接的无螺钉接线端(TERMINALS WITHOUT SCREW CLAMPING FOR CONNECTION OFCONDUCTORS FOR FIXED WIRING,WITH A NOMINAL CROSS-SECTIONNOT EXCEEDIND 2,5 MM2, AND WITHOUT SPECIAL PREPARATION OFTHE CONDUCTOR)NF C20-116-1981室外铜导线用螺钉丝端子(Terminals with screw campling for external copper conductors.)NF C60-002-1994家用及类似用低压电路用连接装置.第2-2部分:不带螺钉型夹件的分开的部件连接装置的特别要求(Connecting devices for low voltage circuits for householdand similar purposes. Part 2-2 : particular requirementsfor connecting devices as separate entities with screwless-type clamping units)NF C83-403-803-2003详细规范:防松螺钉不可拆卸的厚度为0.8MM的带扁平触点的矩形连接器(Detail Specification : rectangular connectors - Flatcontacts, 0,8 mm thickness, locking screw not detachable.)NF C93-561-1981电子元件.螺钉锁定的小型同轴接头.一般规定(Components for electronic equipment. Miniature coaxialconnectors with screw coupling. General requirements.)NF C93-566-1981电子元件.螺钉锁定射频用同轴接头（ＫＮ系列）.一般规定(ELECTRONIC COMPONENTS. RF COAXIAL CONNECTORS WITH SCREWCOUPLING (TYPE KN). GENERAL REQUIREMENTS.)法国螺钉标准(NF screw standards)NF C93-578-1996射频连接件.第20部分:外导线内径为13.56mm(0,534 in)同时带有两条内导线的屏蔽平衡电缆用双头螺钉(3/4-20统(Radio-frequency connectors. Part 25 : two-pole screw (3/4-20 unef) coupled connectors for use with shielded balancedcables having twin inner conductors with inner diameter ofouter conductor1356mm(0534in)(type twhn))NF E02-312-1981钢制规.螺丝孔莫氏锥环规(STEEL GAUGES. MORSE TAPER RING GAUGES.) NF E02-316-1981钢制规.螺丝孔５％锥度环规(STEEL GAUGES. METRIC TAPER RING GAUGES.)NF E03-152-1981用极限量规检验螺纹.螺钉用螺纹规(Thread checking with limit gauges. Threaded gauges for screw.)NF E03-154-1970公制三角螺纹.用极限规检验螺纹.螺钉和螺钉孔光滑度检查器(THREAD CHECKING WITH LIMIT GAUGES. PLAIN GAUGES FOR SCREWSAND NUTS.)NF E04-012-1-1996技术制图.螺钉和螺纹部件.第1部分:通用规范(Technical drawings. Screw threads and threaded parts. Part1 : general conventions.)NF E04-012-2-1996技术制图.螺钉和螺纹部件.第2部分:螺纹嵌镶件(TECHNICAL DRAWINGS. SCREW THREADS AND THREADED PARTS. PART2 : SCREW THREAD INSERTS. (EUROPEAN STANDARD EN ISO 6410-2).)NF E04-012-3-1996技术制图.螺钉和螺纹部件.第3部分:简化表示(TECHNICAL DRAWINGS. SCREW THREADS AND THREADS AND THREADEDPARTS. PART 3 : SIMPLIFIED REPRESENTATION. (EUROPEANSTANDARD EN ISO 6410-3).)NF E22-201-1992滚珠螺钉.第1部分:词汇和命名(Ball screws. Part 1 : vocabulary and designation.)NF E22-202-1992滚珠螺钉.第2部分:公称直径和公称引线.米制系列(Ball screws. Part 2 : nominal diameters and nominal leads.Metric series.)NF E22-203-1993球端螺钉.第3部分:合格条件和合格试验(Ball screws. Part 3 : acceptance conditions and acceptance tests.)NF E25-011-1992紧固件的机械特性.由非亚铁金属制造的螺栓,螺钉,柱螺栓和螺母(MECHANICAL PROPERTIES OF FASTENERS. BOLTS, SCREWS, STUDSAND NUTS MADE OF NON-FERROUS METALS. (EUROPEAN STANDARD EN28839).)NF E25-018-2-1994沉头螺钉.第2部分:十字槽(CONTERSUNK FLAT HEAD SCREWS. PART 2 : PENETRATION DEPTHY OF CROSS RECESSES. (EUROPEAN STANDARD EN ISO 7721-2).)NF E25-021-1994螺钉的十字槽(欧洲标准EN ISO 4757)(Cross recesses for screws.)NF E25-022-1-2001紧固件公差.螺栓、螺钉、双头螺栓和螺母.第1部分:产品等级A、B及C(Tolerances for fasteners - Bolts, screws, studs and nuts -Part 1 : product grades A, B and C.)NF E25-022-1987紧固件.Ｆ级螺钉和螺帽公差（精密机械）.螺纹直径1到3mm(FASTENERS. TOLERANCES FOR BOLTS,SCREWS AND NUTS PRODUCTGRADE F (FINE MECHANIC). THREAD DIAMETERS FROM 1 UP TO 3MM.)NF E25-023-1992紧固件.螺栓和螺钉的自由尺寸孔(Fasteners. Clearance hole for bolts and screws.)NF E25-100-1-1999碳钢合金制成的紧固件的机械性能.第1部分:螺栓、螺钉和螺柱(Mechanical properties of fasteners made of carbon steeland alloy steel - Part 1 : bolts, screws and studs.)NF E25-100-3-1992紧固件.表面不连续性.第1部分:一般要求的螺栓、螺钉和螺柱(FASTENERS. SURFACE DISCONTINUITIES. PART 1 : BOLTS, SCREWSAND STUDS FOR GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN26157-1).)NF E25-100-4-1992紧固件.表面不连续性.第3部分:特殊要求的螺栓、螺钉和螺柱(FASTENERS. SURFACE DISCONTINUTIES. PART 3 : BOLTS, SCREWAND STUDS FOR SPECIAL REQUIREMENTS. (EUROPEAN STANDARD EN26157-3).)NF E25-100-5-1998碳钢和不锈钢制紧固件的机械性能.第5部分:不处在拉伸应力下的固定螺钉和类似螺纹紧固件(Mechanical properties of fasteners made of carbon steeland alloy steel. Part 5 : set screws and similar threadedfasteners not under tensile stresses.)NF E25-100-6-1998不锈钢紧固件耐腐蚀的机械特性.螺栓,螺丝和双端螺栓(Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 1 : bolts, screws and studs.)NF E25-100-7-1995紧固件的机械性能.第7部分:公称直径1-10mm的螺栓和螺钉的扭力试验和最小扭矩(MECHANICAL PROPERTIES OF FASTENERS. PART 7 : TORSIONALTEST AND MINIMUM TORQUES FOR BOLTS AND SCREWS WITH NOMINALDIAMETERS 1 MM TO 10 MM. (EUROPEAN STANDARD EN 20898-7).)NF E25-100-8-1998不锈钢紧固件耐腐蚀的机械特性.不低于拉伸应力下配套螺钉和类似紧固件(Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 3 : set screws and similar fastenersnot under tensile stress.)NF E25-107-1983金属用螺钉.内部六叶埋头.Ａ级.符号ＦＸ(SCREWS. SIX LOBES RECESSED CONTERSUNK HEAD. PRODUCT GRADE A. SYMBOL FX.)NF E25-108-2001半埋头内六角螺钉(Hexalobular socket raised countersunk head screws.) NF E25-109-2001平头内六角螺钉(Hexalobular socket pan head screws.)NF E25-110-2001圆柱头内六角螺钉(Hexalobular socket head cap screws.)NF E25-111-2001凸头内六角螺钉(Hexalobular socket cheese head screws.)NF E25-114-2001六角头螺钉.产品等级A和B(Hexagon head bolts - Product grades A and B.)NF E25-115-2-2001六角头螺钉.产品等级C(Hexagon head screws - Product grade C.)NF E25-116-1983金属用螺钉.方头.标准杆.A和B级.符号Q(Square head screws. Product grades A and B. Symbol Q.) NF E25-117-1983金属用螺钉.方头.全螺纹.A和B级.符号Q(Square head screws. Product grades A and B. Symbol Q.) NF E25-118-1983金属用螺钉.方头.C级.符号Q(Square head screws. Product grade C. Symbol Q.)NF E25-119-1-1994带有H型或Z型的十字槽沉头螺钉(普通头型).产品等级A.第1部分:性能类别4.8的钢(Countersunk flat head screws (common head style) with typeH or type Z cross recessed. Product grade A. Part 1 : steelof property class 4.8.)NF E25-119-2-1994十字槽沉头螺钉(一般头形).等级A.第2部分:8.8类特性钢,不锈钢和有色金属(Cross recessed countersunk flat head scews (common headstyle). Grade A. Part 2 : steel of property class 8.8,stainless steel and non-ferrous metals.)NF E25-120-1994带有H型或Z型的十字槽半沉头螺钉(普通头型).产品等级A(Countersunk raised head screws (common head style) withtype H or type Z cross recessed. Product grade A.)NF E25-121-1994带有H型或Z型十字槽的平圆头螺钉.产品等级A(Pan head screws with type H or type Z cross recess.Product grade A.)NF E25-122-1984金属用螺钉.称作“POLIER“的Z十字槽宽圆头.A级.符号RLZ(SCREWS. CROSS RECESSED MUSHROOM HEAD (POELIERS). PRODUCTGRADE A. SYMBOL RL Z.)NF E25-123-1994一字槽沉头螺钉(普通头型).产品等级A (Slotted countersunk flat head screws (common head style). Product grade A.)NF E25-124-1994一字槽半沉头螺钉(普通头型).产品等级A (Slotted raised countersunk head screws (common head style). Product grade A.)NF E25-126-1997内六角圆头螺钉(HEXAGON SOCKET BUTTON HEAD SCREWS. (EUROPEAN STANDARD EN ISO 7380).)NF E25-128-1994一字槽平圆头螺钉.产品等级A(Slotted pan head screws. Product grade A.)NF E25-130-1986加垫圈的金属用螺钉.锥形光滑压紧垫圈.Ａ级(SCREWS WITH CONICAL SPRING TIGHTENING WASHER. PRODUCTGRADE A.)NF E25-131-1986加垫圈的金属用螺钉.内齿锥形垫圈.Ａ级(SCREWS WITH CONICAL SPRING INTERNAL TOOTHED TIGHTENING WASHER. PRODUCT GRADE A.)NF E25-132-1986加垫圈的金属用螺钉.外齿垫圈.Ａ级(SCREWS WITH SERRATED EXTERNAL OVERLAPED TOOTHED LOCK TIGHTENNING WASHER. PRODUCT GRADE A.)NF E25-133-1987紧固件.螺杆千斤顶用的金属螺钉.短六角头长制动端螺钉.Ａ和Ｂ级.符号ＨＺ(Fasteners. Screws for screw-jacks. Small hexagon headscrews with long dog point. Product grades A and B. SymbolHZ.)NF E25-134-1987紧固件.螺杆千斤顶用的金属螺钉.短方头短制动端螺钉.Ａ和Ｂ级.符号ＱＺ(Fasteners. Screws for screw-jacks. Small square headscrews with short dog point. Product grades A and B. SymbolQZ.)NF E25-139-1987紧固件.金属用螺钉.Ｚ十字槽宽凸圆柱形头.Ａ级.符号ＣＢＬＺＳ(FASTENERS. SCREWS. Z CROSS RECESSED AND SLOTTED PAN HEAD.GRADE A. SYMBOL CBL ZS.)NF E25-142-1991紧固件.电阻焊金属螺钉.缩小头(FASTENERS. RESISTANCE WELDING SCREWS. REDUCED HEAD. SYMBOL Z. SR.)NF E25-149-1998十字槽圆头螺钉(CROSS RECESSED CHEESE HEAD SCREWS. (EUROPEAN STANDARD EN ISO 7048).)NF E25-150-1998带平垫圈的螺钉和垫圈组件.垫圈强度等级为200 HV和300 HV.(Screw and washer assemblies with plain washers. Washerhardness classes 200 HV and 300 HV.)NF E25-151-2001米制细牙螺纹的六角头螺钉.产品等级A和B (Hexagon head screws with metric fine pitch thread -Product grades A and B.)NF E25-160-1992平端开槽调整螺钉(SLOTTED SET SCEWS WITH FLAT POINT. (EUROPEAN STANDARD EN 24766).)NF E25-161-1992锥端开槽调整螺钉(SLOTTED SET SCEWS WITH CONE POINT. (EUROPEAN STANDARD EN 27434).)NF E25-162-1992长制动端开槽调整螺钉(SLOTTED SET SCREWS WITH LONG DOG POINT. (EUROPEAN STANDARD EN 27435).)NF E25-163-1992蝶形端开槽调整螺钉(SLOTTED SET SCEWS WITH CUP POINT. (EUROPEAN STANDARD EN 27436).)NF E25-501-2000紧固件公差.第3部分:螺栓、螺钉和螺母用平垫圈.A级和C级(Tolerances for fasteners - Part 3 : plain washers forbolts, screws and nuts - Product grades A and C.)NF E25-520-1998螺丝和洗衣机组件用水平式洗衣机.小型,常规型和大型系列.A级产品(PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES. SMALL,NORMAL AND LARGE SERIES. PRODUCT GRADE A. (EUROPEANSTANDARD EN ISO 10673).)NF E25-525-2000通用米制螺栓、螺钉和螺母用平垫圈.一般示意图(Plain washers for metric bolts, screws and nuts forgeneral purposes - General plan.)NF E25-600-1984紧固件.木螺钉系列标准(FASTENERS. WOOD SCREWS FAMILY STANDARD.)NF E25-601-1984十字槽沉头木螺钉.符号FZ(CROSS RECESSED COUNTERSUNK HEAD WOOD SCREWS. SYMBOL FZ.)NF E25-602-1984十字槽沉头木螺钉.符号FBZ (CROSS RECESSED RAISED COUNTERSUNK HEAD WOOD SCREWS. SYMBOL FBZ.)NF E25-603-1984一字槽圆头木螺钉.符号RZ(CROSS RECESSED ROUND HEAD WOOD SCREWS. SYMBOL RZ.)NF E25-604-1984有槽沉头木螺钉.符号FS(Slotted countersunk head wood screws. Symbol FS.)NF E25-605-1984木螺丝.一字槽沉头.FBS符号(Slotted raised countersunk head wood screws. Symbol FBS.) NF E25-609-1985木螺钉.螺丝眼(WOODSCREWS. SCREW-EYES.)NF E25-609-1985木螺钉.螺丝眼(WOODSCREWS. SCREW-EYES.)NF E25-610-1985木螺钉.螺丝钩(WOODSCREWS. SCREW-HOOKS.)NF E25-610-1985木螺钉.螺丝钩(WOODSCREWS. SCREW-HOOKS.)NF E25-611-1985木螺钉.直角弯头螺丝钩(WOODSCREWS. SQUARE BEND SCREW HOOKS.)NF E25-611-1985木螺钉.直角弯头螺丝钩(WOODSCREWS. SQUARE BEND SCREW HOOKS.)NF E25-650-1-1994热处理钢自攻螺钉.机械性能(Heat-treated steel tapping screws. Mechanical properties.) NF E25-650-2-1999自攻螺钉螺纹(Tapping screw thread.)NF E25-651-2003耐腐蚀不锈钢紧固件的机械特性.第4部分:攻丝螺钉(Mechanical properties of corrosion-resistant stainlesssteel fasteners - Part 4 : tapping screws.)NF E25-652-2001沉头内六角攻丝螺钉(Hexalobular socket countersunk head tapping screws.)NF E25-653-2001半埋头(椭圆形)内六角攻丝螺钉(Hexalobular socket raised countersunk (oval) head tapping screws.)NF E25-654-2001平头内六角攻丝螺钉(Hexalobular socket pan head tapping screws.)NF E25-655-1983内六角圆头自攻螺钉.符号RLX (ROUND HEAD TAPPING SCREWS WITH SIX LOBES RECESS. SYMBOL RLX .)NF E25-656-1994十字槽沉头自攻螺钉(普通头型)(Cross recessed countersunk (flat) head tapping screws (common head style).)NF E25-657-1994十字槽半沉头椭圆头自攻螺钉(Cross recessed raised countersunk (oval) head tapping screws.)NF E25-658-1994十字槽平圆头自攻螺钉(Cross recessed pan head tapping screws.)NF E25-659-1984自攻螺钉.十字槽半沉头.(`Poelier`).符号RLZ(TAPPING SCREWS. CROSS RECESSED MUSHROOM HEAD (“POELIER“). SYMBOL RL Z.)NF E25-664-1986一字槽六角头自攻螺钉.符号HS(HEXAGON SLOTTED HEAD TAPPING SCREWS. SYMBOL HS.)NF E25-666-1987紧固件.自攻螺钉.Z形十字槽和一字槽平圆头螺钉.符号CBL ZS(FASTENERS. TAPPING SCREWS. Z CROSS RECESSED AND SLOTTEDPAN HEAD. SYMBOL CBL ZS.)NF E25-755-1997非硬度钢和奥斯特不锈钢的内螺纹平行螺钉(Parallel pins with internal thread, of unhardened steel and austenitic stainless steel.)NF E25-756-1997金属不锈钢和硬化钢的平行螺钉(Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins).)NF E25-757-1997非硬度钢和奥斯特不锈钢的内螺纹平行螺钉(Parallel pins with internal thread, of hardened steel and martensitic stainless steel.)NF E25-800-1-1994紧固件.波纹钢管用螺栓.第1部分:带法兰或不带法兰,带尖或不带尖的六角头螺钉.产品等级A(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 1 :HEXAGON HEAD SCREWS WITH OR WITHOUT FLANGE, WITH OR WITHOUTNIBS. PRODUCT GRADE A.)NF E25-800-2-1994紧固件.波纹钢管用螺栓.第2部分:带尖或不带尖的圆头螺钉.产品等级A(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 2 :CHEESE HEAD SCREWS, WITH OR WITHOUT NIBS. PRODUCT GRADE A.)NF E25-851-1987紧固件.滚制螺钉(ISO米制螺纹).特性(FASTENERS. THREAD ROLLING SCREWS (ISO METRIC THREAD). PROPERTIES.)NF E27-163-1972调整螺钉(ADJUSTING SCREW.)NF E27-164-1976锁紧螺钉的垫板(LOCKING SCREW.)NF E27-165-1976锁紧螺钉的穿销(SLIDE FOR LOCKING SCREW.)NF E27-166-1976滚花头锁紧螺钉(LOCKING SCREW WITH KNURLED KNOB.)NF E27-167-1976星形手扭锁紧螺钉(LOCKING SCREW WITH PALM KNOB.)NF E27-168-1976四翼锁紧螺钉(LOCKING SCREW WITH 4 ARMED KNOB.)NF E27-170-1974通用滚花头螺钉(GENERAL PURPOSE KNURLED THUMBS SCREWS.) NF E27-191-1983紧固件.有肩固定螺钉(FASTENERS. SHOULDERED RETAINING SCREWS.)NF E27-214-1976带小提琴紧弦用的蝶形螺母锁紧螺钉(LOCKING SCREW WITH VIOLIN TYPE THUMB NUT.) NF E27-215-1976带六角螺母的锁紧螺钉(LOCKING SCREWS WITH HEXAGON NUT.)NF E27-303-1968有孔球头螺钉(SPHERICAL HOLED HEAD SCREW.)NF E27-853-1989通用金属卡箍.带型，无螺钉，不可重复使用(Metallic hose clamps for general purpose. Band type,without screws, non re-usable. Specifications.)NF E27-854-1982通用金属卡箍.带型,无螺钉,可重复使用的销钉卡箍或轴的卡箍(METAL-HOSE CLAMPS FOR GENERAL PURPOSES ; BAND TYPE,WITHOUTSCREWS,RE-USABLE,PIN OR AXLE CLAMPS.)NF E62-307-1977机床构造标准部件.多轴头.防护装置.２８和３６卧式防护装置.支架.行程止推螺钉(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLEHEADS. HORIZONTAL TEMPLATES 28 AND 36. SUPPORTS : STOPSCREW.)NF E62-519-2003柱形扁柄刀具用螺钉压紧刀具夹(立铣刀刀夹).第1部分:刀柄驱动系统的尺寸(Tool chucks (end mill holders) wirth clamp screws forflatted cylindrical shank tool - Part 1 : dimensions of thedriving system of tool shanks.)NF E62-520-2003柱形扁柄刀具用螺钉压紧刀具夹(立铣刀刀夹).带7/24锥柄的夹头尺寸(Tools chucks (end mill holders) wirth clamp screws forflatted cylindrical shank tools - Dimensions of chucks with7/24 taper shank.)NF E62-526-2003带7/24外圆锥和莫氏内圆锥缩径套筒和连接螺钉(Reduction sleeves with 7/24 external and Morse internaltaper and incorporated screw.)NF E63-512-1983铸型和挤压器材.金属模型构件.止动螺钉(MOULDING AND EXTRUSION EQUIPMENT. METALLIC MOULDING ELEMENTS. LOCKING SCREWS.)NF E66-103-1993机用螺丝锥和手动螺丝锥(Short machine taps and hand taps.)NF E66-107-2000公称直径由M3-M10的长杆螺丝攻.由回缩的全直径杆型螺丝攻(Long shank taps with nominal diameters from M3 to M10 -Full-diameter shank taps with recess.)NF E66-108-2000公称直径由M3-M24和1/8-1 英寸的长杆螺丝攻.渐减型螺丝攻(Long shank taps with nominal diameters from M3 to M24 and1/8 in to 1 in - Reduced shank taps.)NF E66-120-1975圆柱和锥形管螺纹手用螺丝锥(HAND TAPS FOR PIPE THREADS FOR PARALLEL AND TAPER THREADS.)NF E66-150-1990ＩＳＯ公制螺纹的手用和机用圆螺丝板牙(Hand- An machine-operated circular screwing dies and hand-operated die stocks.)NF E66-153-1990煤气管道圆柱螺纹手用和机用圆螺丝板牙(Hand-and machine-operated circular screwing dies for parallel pipe threads. G series.)NF E74-303-2001螺钉和螺母组装工具.锻造的和管形套筒扳手.头部外形最大尺寸(Assembly tools for screws and nuts - Forged and tubularsocket wrenches - Maximum outside head dimensions.)NF E74-304-2001螺钉和螺母装配工具.双头开口扳手、双头环形扳手和多用扳手.端部最大宽度(Assembly tools for screws and nuts - Double-headed open-ended wrenches, double-headed ring wrenches and combinationwrenches - Maximum widths of heads.)NF E74-305-2001螺钉和螺母装配工具.双头扳手.尺寸选配(Assembly tools for screws and nuts - Double-ended wrenches - Size pairings.)NF E74-307-2001螺钉和螺母用装配工具.组合扳手.扳手长度和端口最大厚度(Assembly tools for screws and nuts - Combination wrenches- Lengths of wrenches and maximum thickness of heads.)NF E74-310-2001螺钉和螺母用装配工具.工程用双头开口扳手.扳手长度和端口厚度(Assembly tools for screws and nuts - Double-headed open-ended engineers' wrenches - Length of wrenches andthickness of the heads.)NF E74-311-2001螺钉和螺母用装配工具.双头平直套筒扳手和斜口套筒扳手.扳手长度和端口厚度(Assembly tools for screws and nuts - Double-headed, flatand offset, box wrenches - Length of wrenches and thicknessof the heads.)NF E74-313-2001螺钉和螺母用装配工具.双头深斜口套筒扳手和改进的斜口套筒扳手.扳手长度和端口厚度(Assembly tools for screws and nuts - Double-headed, deepoffset and modified offset, box wrenches - Length ofwrenches and thickness of the heads.)NF E74-321-1998螺钉和螺母用装配工具.十字形套筒扳手.尺寸和扭矩试验(ASSEMBLY TOOLS FOR SCREWS AND NUTS. FOUR-WAY SOCKETWRENCHES. DIMENSIONS AND TORQUE TEST.)NF E74-322-1972螺钉螺帽紧固工具.齿条式扳手(ASSEMBLY TOOLS FOR SCREWS AND NUTS.RACK WRENCHES.)NF E74-323-1972螺钉螺帽紧固工具.开槽螺帽用单钩扳手(ASSEMBLY TOOLS FOR SCREWS AND NUTS.HOOK WRENCHES)NF E74-324-2001螺钉和螺母用装配工具.可调扳手(Assembly tools for screws and nuts - Adjustable wrenches.)NF E74-325-2003螺钉和螺母用装配工具.手动转矩工具.设计一致性试验、质量一致性试验和重新校准程序的要求和试验方法(Assembly tools for screws and nuts - Hand torque tools -Requirements and test methods for design conformancetesting, quality conformance testing and recalibrationprocedure)NF E74-331-2003螺钉和螺母用装配工具.内六角扳手(Assembly tools for screws and nuts - Hexagon socket screw keys.)NF E74-351-2002螺钉和螺母用装配工具.一字槽头螺钉用旋具.第2部分:手工操作旋具的一般要求、刀刃长度和标记(Assembly tools for screws and nuts - Screwdrivers forslotted-head screws - Part 2 : general requirements,lengths of blades and marking of hand-operatedscrewdrivers)NF E74-352-1998螺钉和螺母用装配工具.槽螺钉用旋具.第1部分:手工及机械操作用的旋具头(Assembly tools for screws and nuts. Screwdrivers forslotted-head screws. Part 1 : tips for hand- and machine-operated screwdrivers.)NF E74-353-1-2002螺钉和螺母用装配工具.机动旋转头.第1部分:一字槽螺钉旋具(Assembly tools for screws and nuts - Machine-operatedscrewdriver bits - Part 1 : screwdriver bits for slottedhead screws.)NF E74-353-2-2002螺钉和螺母用装配工具.机动旋转头.第2部分:十字槽螺钉旋具头(Assembly tools for screws and nuts - Machine-operatedscrewdrivers bits - Part 2 : screwdriver bits for cross-recessed head screws.)NF E74-353-3-2002螺钉和螺母用装配工具.机动旋转头.第3部分:内六角螺钉用旋具头(Assembly tools for screws and nuts - Machine-operatedscrewdriver bits - Part 3 : screwdriver bits for hexagonsocket screws.)NF E74-354-2002螺钉和螺母用装配工具.螺旋棘轮螺钉旋具头.尺寸(Assembly tools for screws and nuts - Spiral ratchetscrewdriver ends - Dimensions.)NF E74-355-1993十字槽头螺钉用旋转具.第1部分:旋具尖(SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS. PART 1 : DRIVERS POINTS.)NF E74-356-1993十字槽头螺钉用旋具.第2部分:手持式旋具的一般要求、旋具头长度和标记(SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS. PART 2 :GENERAL REQUIREMENTS, LENGTHS OF BLADES AND MARKING OFHAND-OPERATED SCREWDRIVERS.)NF E74-360-2001螺钉和螺母用装配工具.手动和机动螺丝刀的驱动端和连接部件.尺寸和扭矩试验(Assembly tools for screws and nuts - Drive ends for hand-and machine-operated screwdriver bits and connecting parts- Dimensions, torque testing.)NF E74-360-2001螺钉和螺母用装配工具.手动和机动螺丝刀的驱动端和连接部件.尺寸和扭矩试验(Assembly tools for screws and nuts - Drive ends for hand-and machine-operated screwdriver bits and connecting parts- Dimensions, torque testing.)NF E74-361-1997螺钉和螺母用装配工具.方形旋具.第1部分:手动套筒工具用方形旋具(Assembly tools for screws and nuts. Driving squares. Part1 : driving squares for hand socket tools.)NF E74-362-1997螺钉和螺母用装配工具.方形旋具.第2部分:电动套筒工具用方形旋具(Assembly tools for screws and nuts. Driving squares. Part2 : driving squares for power socket tools.)NF E74-363-1-1997螺钉和螺母用装配工具.方形传动套筒.第1部分:手动套筒.尺寸(Assembly tools for screws and nuts. Square drive sockets.Part 1 : hand-operated sockets. Dimensions.)NF E74-363-2-1997螺钉和螺母用装配工具.方形传动套筒.第2部分:机动“冲击“套筒.尺寸(Assembly tools for screws and nuts. Square drive sockets.Part 2 : machine-operated sockets “impact“. Dimensions.)NF E74-363-3-2001螺钉和螺母用组合工具.方形驱动套筒.第3部分:机器驱动套筒(无冲击).尺寸(Assembly tools for screws and nuts - Square drive sockets- Part 3 : machine-operated sockets (“non impact“) -Dimensions.)NF E74-365-1997螺钉和螺母用装配工具.手动方形传动套筒扳手上的传动件.尺寸和试验(Assembly tools for screws and nuts. Driving parts forhand-operated square drive socket wrenches. Dimensions andtests.)NF E74-366-1997螺钉和螺母用装配工具.手动方形传动套筒扳手上的附件.尺寸和试验(Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Dimensions andtests.)NF E74-367-1995螺钉和螺母用装配工具.机动插头扳手的方块传动加长六角插头(Assembly tools for screws and nuts. Square drive extensionhexagon insert, for power socket wrenches.)NF E74-381-1997螺钉和螺母用装配工具.技术规范.第1部分:手动扳手和套筒(Assembly tools for screws and nuts. Technicalspecifications. Part 1 : hand-operated wrenches andsockets.)NF E82-020-1984模压锻造零件.拉紧装置用灯的螺钉.规范(DROP FORGINS. EYEBOLTS FOR TURNBUCKLES. REQUIREMENTS.)NF F01-088-1971铁路运输设备.带有槽端头和螺纹端头的未钻孔轴.头部钻孔的螺钉(RAILWAY TRANSPORT EQUIPMENT. UNBORED AXLES WITH SLOTTEDAND THREADED ENDS. SCREWS WITH DRILLED HEADS.)NF F03-004-1983铁路车辆.金属螺钉. 沉头和半沉头. Ａ级.符号Ｆ和ＦＢ(Railway rolling stock. Grade A. Countersunk and raisedcountersunk notched head machine screws. Symbols F and FB.)NF F03-005-1983铁路车辆.金属螺钉. 圆柱头和球面圆柱头.Ａ级. 符号Ｃ和ＣＲ(Railway rolling stock. Grade A. Notched cheese head ornotched dome head machine screws. Symbols C and CR.)NF F03-006-1983铁路车辆.开槽懦半沉头螺钉一螺母. Ａ级.符号ＦＢＰ(Railway rolling stock. Grade A. Slotted or notched raisedcountersunk head screws nuts. Symbol FBP.)NF F03-016-1983铁路车辆.开槽沉头螺钉, 螺母. Ａ级. ＦＰ(Railway rolling stock. Grade A. Slotted countersunk headscrews nuts. Symbol FP.)NF F10-404-1984铁路车辆.0.25MN的联接螺钉(Railway transport equipment. Coupling screw of 0,25 mn.)NF F11-003-1970铁路车辆.手制动. 螺钉和螺母. 螺距和螺纹剖面. 螺钉传动(RAILWAY TRANSPORT EQUIPMENT. HAND BRAKE. SCREWS AND NUTS.PITCHES AND PROFILES. SCREW DRIVES.)NF F50-006-1998铁路固定设备.带可变螺纹的枕木螺丝(Railway fixed equipment. Sleeper screws with variable thread.)NF F55-251-1991铁路固定设备.信号电路.连接和分段器材.螺钉连接部件(RAILWAY FIXED EQUIPMENT. SIGNALLING. CIRCUITS. CONNECTINGAND BREAKING COMPONENTS. SCREW-TYPE TERMINAL BLOCKS.)NF F56-123-1980铁路固定设备.通讯和信号装置架空线路用器材.直径口毫米镀锌方头木螺钉(FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEADTELECOMMUNICATION AND SIGNALLING LINES. GALVANIZED SQUAREHEAD WOOD SCREWS.)NF J41-465-1957造船工业.“金士顿“阀门.螺钉零件(SHIPBUILDING. KINGSTON VALVES. BOLTS AND SCREWS.)NF J46-126-1951造船工业.空气入口.手柄和紧固螺钉(SHIPBUILDING. VENTILATORS. HANDLE AND LOCKING SCREW.) NF L22-063-1970用板手操作的螺母、螺钉和轴的间隙(CLEARANCE FOR WRENCHING NUTS,SCREWS AND PINS.)NF L22-070-1976螺钉的BNAE型十字槽(CROSS RECESS (B.N.A.E.).)NF L22-071-1976NFL ２２-０７０ 型螺钉十字槽用螺丝刀头(SCREW-DRIVER END FOR CROSS RECESS ACCORDING TO NF L 22-070.)NF L22-071-1976NFL ２２-０７０ 型螺钉十字槽用螺丝刀头(SCREW-DRIVER END FOR CROSS RECESS ACCORDING TO NF L 22-070.)NF L22-072-1991航天建筑.螺丝.920型十字槽(Aerospace construction. Bolts and screws. 92 degrees cruciform recess.)NF L22-090-1966修配用大直径标准螺钉、销和垫圈(STANDARDIZED SCREWS,PINS AND WASHERS WITH INCREASED DIAMETER INTENDED FOR REPAIR WORK.)NF L22-111-1975无销孔六角头螺钉.国际单位制螺纹(Hexagon head bolts without split pin hole. Sim thread (rech.).)NF L22-112-1975带销孔六角头螺钉.国际单位制螺纹(Hexagon head bolts with split pin hole. Sim thread (rech.).)NF L22-121-1975带轻杆无锁孔六角头螺钉.国际单位制螺纹(Hexagon head bolts with waisted shank without split pin hole. Sim thread (rech.).)NF L22-122-1975带轻杆有销孔六角头螺钉.国际单位米制螺纹(Hexagon head bolts with waisted shank with split pin hole.Sim thread.)NF L22-125-1985六角头承拉螺钉ISO 螺纹４h 类(Bolt, hexagonal head, for tensile application, . ISO thread 4H class.)NF L22-126-1985带锁紧孔六角头承拉螺钉.ISO螺纹４h 类(Bolt, hexagonal head, with locking hole, for tensile application. ISO thread 4H class.)NF L22-127-1985带颈杆六角头承拉螺钉.ISO螺 纹４h 类(Bolt, hexagonal head, necked shank, for tensile application. ISO thread 4H class.)NF L22-128-1985带颈杆有锁紧孔六角头承拉螺钉.ISO 螺纹４h 类(Bolt, hexagonal head, necked shank, with locking hole, fortensile application. ISO thread 4H class.)NF L22-129-1985带销孔六角头承拉螺钉.ISO 螺纹４h 类(Bolt, hexagonal head, with split pin hole, for tensile application. ISO thread 4H class.)NF L22-134-1975无销孔六角头槽制螺钉.国际单位制螺纹(Precision hexagon head bolts without split pin hole. Sim thread (rech.).)NF L22-135-1975带销孔六角头槽制螺钉.国际单位制螺纹(Precision hexagon head bolts with split pin hole. Sim thread (rech.).)NF L22-136-1984通用六角头螺钉短螺纹(Bolt, hexagonal head, current use, short thread.)NF L22-137-1984带锁紧孔六角头短螺纹螺钉(Bolt, hexagonal head, with locking hole, short thread.) NF L22-138-1984精密六角头短螺纹螺钉(Bolt, hexagonal head, close tolerance, short thread.)NF L22-139-1984带锁紧孔精密头角头短螺纹螺钉(BOLT,HEXAGONAL HEAD,CLOSE TOLERANCE,WITH LOCKING HOLE,SHORT THREAD.)NF L22-140-1984六角头全螺纹螺钉(Bolt, hexagonal head, threaded to head.)NF L22-141-1984有锁紧孔方角头全螺纹螺钉(Bolt, hexagonal head, with locking hole, threaded to head.)NF L22-142-1984常用有销孔六角头螺钉(BOLT,HEXAGONAL HEAD,WITH COTTER PIN HOLE,CURRENT USE.)NF L22-145-1985六角头承拉螺钉.ISO螺纹4G类(Bolt, hexagonal head, for tensile application, ISO thread 4G class.)NF L22-146-1985有锁紧孔六角头承拉螺钉.ISO螺纹4G类(Bolt, hexagonal head, with locking hole, for tensile application. ISO thread 4G class.)NF L22-147-1985带颈杆六角头承拉螺钉.ISO螺纹4G类(Bolt, hexagonal head, necked shank, for tensile application. ISO thread 4G class.)NF L22-148-1985带颈杆有销紧孔六角头承拉螺钉.ISO螺纹4G类(Bolts, hexagonal head, necked shank, with locking hole,for tensile application. ISO thread 4G class.)NF L22-151-1975开槽圆柱头螺钉和紧固凸圆头螺钉.国际单位制螺纹(Slotted and drilled cheese head screws. Sim thread(rech.).)NF L22-152-1975开槽扁头螺钉.国际单位米制螺纹(Slotted mushroom head screws. Sim thread (rech.).)NF L22-153-197590°埋头开槽螺钉.国际单位米制螺纹(Slotted 90 degrees countersunk head screws. Sim thread (rech.).)NF L22-154-1975120°半圆头开槽埋头螺钉.单际单位米制螺纹(Slotted raised 120 degrees countersunk head screws. Simthread (rech.).)NF L22-156-1975锥顶凸圆头开槽螺钉.国际单位米制螺纹(Slotted raised cheese head screws with cone point. Sim thread (rech.).)NF L22-157-1975锥顶扁头开槽螺钉.国际单位米制螺纹(Slotted mushroom head screws with cone point. Sim thread (rech.).)NF L22-158-1975锥顶90°埋头开槽螺钉.国际单位米制螺纹(Slotted 90 degrees countersunk head screws with cone point. Sim thread (rech.).)NF L22-159-1975锥顶120°半圆头开槽埋头螺钉.国际单位米制螺纹(Slotted raised 120 degrees countersunk head screws withcone point. Sim thread (rech.).)NF L22-161-1984有NF L22-72十字槽的通用100°埋头螺钉(Bolt, 100 degrees countersunk head, current use, nf L 22-072 cross recess.)NF L22-162-1984有NF L22-072十字槽的精密100°全螺纹埋头螺钉(Bolt, 100 degrees countersunk head, close tolerance, nf L22-072 cross recess.)NF L22-163-1984有NF L22-072十字槽的常用100°度全螺纹埋头螺钉(Bolt, 100 degrees countersunk head, threaded to head, nf L22-072 cross recess.)NF L22-167-1984有NF L22-070十字槽的常用100°埋头螺钉(Bolt, 100 degrees countersunk head, current use, nf L 22-070 cross recess.)NF L22-168-1984有NF L22-070 十字槽的紧公差100°沉头螺钉(BOLT,100 DEGREES COUNTERSUNK HEAD,CLOSE TOLERANCE,NF L 22-070,CROSS RECESS.)NF L22-169-1984有 NF L22-070十字槽的100°全螺纹埋头螺钉(BOLT,100 DEGREES COUNTERSUNK HEAD,THREADED TO HEAD,NF L22-070,CROSS RECESS.)NF L22-171-1984有NF L22-072十字槽的常用半圆头螺钉(Bolt, pan head, current use, nf L22-072 cross recess.) NF L22-173-1984有NF L22-072十字槽全螺纹半圆头螺钉(BOLT,PAN HEAD,THREADED TO HEAD,NF L 22-072 CROSS RECESS.)NF L22-176-1984有NF L22-072十字槽锥顶半圆头非磁性螺钉(Bolt, pan head, amagnetic with cone point NF L 22-072 cross recess.)NF L22-177-1984有NF L22-070十字槽常用半圆头螺钉(Bolt, pan head, current use, nf L 22-070 cross recess.) NF L22-179-1984有NF L22-070十字槽全螺纹半圆头螺钉(BOLT,PAN HEAD,THREADED TO HEAD,NF L 22-070 CROSS RECESS.)NF L22-181-1976有BNAE十字槽扁头螺钉.国际单位米制螺纹(MUSHROOM HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.)NF L22-182-1976有BNAE十字槽90°埋头螺钉.国际单位米制螺纹(90 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSSRECESS. SIM THREAD.)NF L22-183-1976有BNAE十字槽90°埋头螺钉.国际单位米制螺纹(RAISED 120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E.CROSS RECESS. SIM THREAD.)NF L22-184-1976有BNAE十字槽120°埋头螺钉.国际单位米制螺纹(120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSSRECESS. SIM THREAD.)NF L22-186-1976有BNAE十字槽锥顶扁头螺钉.国际单位米制螺纹(MUSHROOM HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONEPOINT. SIM THREAD.)NF L22-187-1976有BNAE十字槽锥顶90°埋头螺钉.国际单位米制螺纹(90 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSSRECESS AND CONE POINT. SIM THREAD.)NF L22-188-1976有BNAE十字槽锥顶120°埋头半圆头螺钉单国际单位制米螺纹(RAISED 120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E.CROSS RECESS AND CONE POINT. SIM THREAD.)NF L22-189-1976有BNAE十字槽锥顶120°埋头螺钉.国际单位米制螺纹(120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSSRECESS AND CONE POINT. SIM THREAD.)NF L22-201-1984短螺纹精密螺钉.六角头.ISO螺纹(Bolt, hexagonal head, short thread, close tolerance. ISO thread.)。
NF gear standards法国齿轮标准(doc 6页)
NF gear standards法国齿轮标准(doc 6页)法国齿轮标准(NF gear standards)ANSI | BS | DIN | EN | GB | ISO | JIS | NF |DIC编号中文名称英文名称NFE23-001-1-1998齿轮术语词汇.第1部分:有关几何学上的定义 (Vocabulary of gear terms. Part 1 :definitions related to geometry.)NF E23-002-1988 齿轮词汇.几何定义.螺旋齿轮 (GEARS. GLOSSARY OF WORM GEAR PAIRS. GEOMETRICAL DEFINITIONS.) NF E23-005-1998齿轮的国际符号表示法.几何参数符号 (International gear notation. Symbols for geometrical data.) NF E23-007-1-1995 圆柱齿轮.准确度的ISO 体系.第1部分:齿轮齿对应齿根面相应偏差的容许值和定义 (Cylindrical gears. ISO system of accuracy. Part 1 : definitions and allowable values of deviations relevant to corresponding flanks of gear teeth.)NF E23-007-2-1997 圆柱齿轮.ISO 体系的准确度.第2部分:有关放射要素偏差度和输出信息的相应偏差的容许值和定义 (CYLINDRICAL GEARS. ISO SYSTEM OF ACCURACY. PART 2 : DEFINITIONS AND ALLOWABLE VALUES OF DEVIATIONS RELEVANT TO RADIAL COMPOSITEDEVIATIONS AND RUNOUT INFORMATION.)NF E23-009-1998 普通和重型(Cylindrical gears for技术设备用圆柱齿轮.标准基本齿条齿牙剖面 general and heavy engineering. Standard basic rack tooth profile.)NF E23-014-1994齿轮.ISO 术语.齿轮齿术语:磨损和损坏 (Gears. ISO system ofterminology. Terminology for theappearance of gear teeth : wear anddamages.) NF E23-016-1986锥形直的齿轮.给齿轮工人的说明书 (STRAIGHT BEVEL GEARS. INFORMATION TO BE GIVEN TO THE MANUFACTURER.) NFE23-022-1-2002齿轮装置的验收标准.第1部分:空气声的测试标准 (Acceptance code for gear units - Part 1 : test code for airborne sound.)NFE23-030-1-2002正齿轮和斜齿轮承载能力的计算.第1部分:基本原理、说明和一般影响因素(Calculation of load capacity of spur and helical gears - Part 1 : basic principles, introduction and general influence factors.)NF E23-030-2-2003 正齿轮和斜齿轮承载能力的计算.第2部分:齿轮表面耐用能力的计算 (Calculation of loadcapacity of spur andhelical gears - Part 2 :calculation of surfacedurability (pitting).)NF E23-030-3-2003 正齿轮和斜齿轮承载能力的计算.第3部分:轮齿弯曲强度的计算 (Calculation of load capacity of spur and helical gears - Part 3 : calculation of tooth bending strength.) NF直齿轮和斜(Calculation of loadE23-030-5-2003 齿轮承载能力的计算.第5部分:材料的强度和质量 capacity of spur and helical gears - Part 5 : strength and quality of materials.)NF E23-035-2003石油和天然气工业.特殊用途高速齿轮部件 (Petroleum and natural gas industries - High speed special-purpose gear units.)NF E51-234-2003石油、化学和气体设备工业.包装的整体式齿轮分离空气压缩机 (Petroleum, chemical and gas serviceindustries - Packaged, integrally geared centrifugal air compressors.) NF E62-250-1976机床构造标准部件.多轴头.简单直齿轮(UNIT HEADS. MULTI SPINDLE HEADS. SIMPLE STRAIGHT TOOTHED PINIONS.)NF E62-251-1976机床构造标准部件.多轴头.偏心轮毂直齿轮 (UNIT HEADS. MULTI SPINDLE HEADS. OFFSETBOSS STRAIGHT TOOTHED PINIONS.) NF E62-255-1976 机床构造标准部件.多轴头.１号和２号攻螺纹轴上的直齿主动齿轮(MODULAR UNITS FORMACHINE TOOLS.MULTISPINDLE HEADS.CONTROLSTRAIGHT-TOOTHEDPINIONS FOR TAPPINGSPINDLES NO 1 AND 2.) NF E62-256-1976 机床构造标准部件.多轴头.３号和４号攻螺纹轴上的直齿主动齿轮(MODULAR UNITS FORMACHINE TOOLS.MULTISPINDLE HEADS.CONTROLSTRAIGHT-TOOTHEDPINIONS FOR TAPPINGSPINDLES NO 3 AND 4.) NF E62-257-1976机床构造标准部件.多(MODULAR UNITS FOR MACHINE TOOLS.轴头.简单直齿轮MULTISPINDLE HEADS. SIMPLESTRAIGHT-TOOTHED PINIONS.)NF E62-258-1976机床构造标准部件.多轴头.偏心轮毂直齿轮 (MODULAR UNITS FORMACHINE TOOLS. MULTISPINDLE HEADS.OFFSET BOSSSTRAIGHT-TOOTHEDPINIONS.) NF E66-235-1966 链传动.切削齿轮的圆盘铣刀断面 (CHAIN TRANSMISSIONS.PROFILE OF CHAIN WHEELMODUAL CUTTERS.) NF E66-236-1966 链传动.切削齿轮的滚刀断面 (CHAIN TRANSMISSIONS. PROFILE OF CHAIN WHEEL HOBS.)NF F02-303-1990 铁路车辆.齿轮及传动齿轮 (RAILWAY ROLLING STOCK. GEARS PINIONS AND WHEELS.)NF F10-420-1991铁路车辆.牵引车辆和拖车用车钩、牵引装置及驱动齿轮装置(Railway rolling stock. Coupling, traction and driving gears for tractive and hauled stock.)NF J95-030/A1-2000 小艇.始于齿轮的保护(Small craft -Start-in-gearprotection.) NF J95-044-2001小型船舶.操舵装置.齿轮链接系统 (Small craft - Steering gear - Geared link systems.)NF R11-411-1987道路车辆.起动机齿轮.齿轮特性和检验 (ROAD VEHICLES.STARTER-GEAR SYSTEM. GEAR CHARACTERISTICS AND CONTROL.) NF S80-501-1995 钟表业.渐(Horology. Corrected开线齿轮或摆轮校正.最佳模数cylcloidal or involute toothing gears.Preferred modules.) NF S80-504-1995 钟表业.渐开线齿轮或摆轮校正.齿轮对的轮齿 (Horology. Corrected cycloidal or involute toothing gears.Toothing for coupled gears.)NF S80-505-1995 钟表业.渐开线齿轮或摆轮校正.齿轮组的轮齿 (Horology. Corrected cycloidal or involute toothing gears.Toothing for trains of gears.)NF S80-525-1995钟表业.校正摆轮.齿轮增速装置.基础型材.主动轮和从动轮 (Horology. Corrected cycloidal toothing gears. Step up gears. Basic profiles. Driving gear and driven gear.) NF S80-526-1995钟表业.校正摆轮.增速或减速齿轮(Horology. Corrected cycloidal toothing gears. Step up or reducting gears.)NF S80-541-1995 钟表业.校正摆轮.簧盒中心齿轮(Horology. Correctedcycloidal toothinggears. Spring-barrelcentre gears.) NF S80-560-1995 钟表业.渐开线齿轮.词汇 (Horology. Involute toothing gears. Vocabulary.)NF S80-565-1995 钟表业.渐开线齿轮.标准齿条 (Horology. Involute toothing gears. Basic racks.)NF S80-566-1995 钟表业.渐开线齿轮.标准轮齿 (Horology. Involute toothing gears. Normal toothing.)NF S80-567-1995 钟表业.渐(Horology. Reducing开线齿轮.中心距离无变化的修正的齿形插口 involute toothing gears. Corrected toothing without variation of centredistance.)NF S80-568-1995 钟表业.渐开线减速齿轮.有轴距变化的校正齿轮(Horology. Reducing involute toothing gears. Corrected toothing with variation of centre distance.)NF S80-569-1995 钟表业.渐开线减速齿轮.偏心距模数为0.5的校正轮齿 (Horology. Reducing involute toothinggears. Toothingcorrected by shift to 0,5 module.) NF S84-060-1996钟表业.表的中心轴.与小齿轮的连接尺寸 (Horology. Center staff for watches. Fitting dimensions with cannon pinion.)NF T60-507-1991 润滑剂、工业用油及相关产品(L类).分类.第6部分:C 系列(齿轮传动)(LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 6 : FAMILY C (GEARS).)NF T60-602-1995 工业齿轮用耐特高压润滑剂.人工老化氧化稳定性的评定(EXTREME PRESSURELUBRICANTS FORINDUSTRIAL GEARS.EVALUATION OF OXIDATIONSTABILITY BY ARTIFICIALAGEING.)编号中文名称英文名称返回。
法国密封标准NFsealsstandards汇总
NF B30-104-1968
玻璃.热焊双层嵌内式密 封玻璃的研究.(光弹性 法)
(GLASS. ANALYSIS OF SEALS OF TWO GLASSES OBTAINED BY HOT WELDING. (PHOTO-ELASTICIMETRIC METHOD).)
NF B40-336-1997
铝和铝合金.阳极化.第 6 (Aluminium and aluminium alloys. Anodizing. Part 6 :
A91-455-6-1999
部分:通过对未预先进行 酸处理的浸入到磷酸/铬 酸溶液中的质量损失的 测量对密封阳极氧
assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment.)
NF A09-107-1979
用氨酸进行的密封检验. 渗漏定位法.气孔法
(TESTING FOR LEAK TIGHTNESS BY MEANS OF AMMONIA. LOCATING OF LEAKS BY THE SUCTION CUP METHOD.)
NF A09-108-1979
密封检验.减压箱检验的 建议
NF A09-490-1988
无损检验.密封检验.气体 密封规范和检验用推荐 方法
(NON DESTRUCTIVE TESTING. TESTING FOR LEAK TIGHTNESS. RECOMMENDED PRACTICES FOR THE SPECIFICATION AND TESTING OF GAS-TIGHTNESS.)
欧洲螺栓标准(EN bolt standards)
EN 26157-3-1991
EN 2859-1995
航空航天系列 镀镉 合金钢制标准六角头 紧公差普通柄短螺纹 螺 栓 等 级 ： 1100 MPa ( 环 境 温 度)/235℃
航空航天系列 阳极 氧化钛合金标准双六 角头紧公差普通柄 EN MoS2 润滑的短螺纹 2870-1996+AC-1996 螺 栓 等 级 ： 1100MPa( 环 境 温 度)/31
EN 1450-1996+A1-19982-2001
EN 六 角 法 兰 螺 栓 重 型 Hexagon bolts with 1665-1997+AC-1998 系列 flange - Heavy series Fasteners; Bolts, screws, studs and nuts; 紧固件 螺栓、螺柱和 Symbols and 螺母 尺寸代号和标 designation of 注 dimensions (ISO 225:1983) Fasteners; Clearance 紧固件 螺栓和螺钉 holes for bolts and 用通孔 screws (ISO 273:1979)
EN 24015-1991
EN 2413-1995
航空航天系列 镀镉 合金钢制肩薄六角头 高精度公差柄短螺纹 螺 栓 分 类 ： 1100MPa( 在 环 境 温 度下)/235℃
EN 2549-1995
航空航天系列 阳极 氧化 MOS2 润滑的钛 合金制普通六角头紧 公差标准柄短螺纹螺 栓 等 级： 1100MPa （环境温度）/
EN 2583-1997
航 空 航 天 系 列 NI-PH2601(铬镍铁合 金 718)耐热镍基合金 MJ 螺纹螺栓 等级： 1275MPa( 环 境 温 度)/650℃ 技术规
管件英文缩写全abbreviationsofpipefittings
管件英文缩写大全abbreviations of pipe fittingsA Anchor 固定ABS 绝对AG 石棉垫片Asbestos gasketAISI American Iron and Steel Institute 美国钢铁学会AL 铝AluminumANNY 退火AnnealedANSI American National Standards Institute 美国国家标准学会API American Petroleum Institute 美国石油学会APP 约、近似ApproximateAPPROX Approximate 大约，近似的APPX 附录AppendixAS 合金钢Alloy steelASB Asbestos 石棉ASI 美国规格学会标准ASME American Society Of Mechanical Engineers美国机械工程师协会ASME 美国机械工程师学会标准Association 美国水工协会ASSY Assembly 装配，组装ASTM American Society Of Testing Material 美国材料实验协会ASTM 美国材料实验协会标准AT 酸洗ATM Atmosphere 大气压AUST 奥氏体不锈钢Austenitic stainless-steelAUT 自动AutomaticAV 角阀AVG 平均AverageAW 电弧焊Arc weldingAWG American Wire Gage 美国线规AWS American Weld Society 美国焊接协会AWS 美国焊接协会标准AWWA American Water WorksB.C Bolted Cover(cap) 螺栓连接的阀兰盖（帽）B.E Bell End 承口BAV 球阀Ball valveB-B Beveled End-Beveled End 两头为坡口端BB Bolted Bonnet 栓柱连接的阀盖BC Bolt Circle 螺栓中心圆BC 螺栓散布圆Bolt circleBCT 螺栓冷紧Bolt cold tighteningBE Beveled End (for weld) 坡口（焊接用）BE 坡口端Beveled endBEDD 基础工程设计数据Basic engineering design data BEP Both Ends Plain 两头平BET Both Ends Threaded 两头带螺纹BF Blind Flange 盲板法兰BF 法兰盖（日法兰）Blind flangeBHY 螺栓热紧Bolt hot tighteningBL Battery Limit 装置区边界BL 装置边界限Battery limit lineBLD Blind 盲板BLDG Building 建筑物BLDG 建筑物BuildingBLF beveled long end 大端开坡口BLK 盲板BlankBM Bill Of Material 材料表BOP Bottom Of Pipe 管底BOP 管底Bottom of pipeBOS 支架底Bottom of supportB-P Beveled End —Plain End 坡口端.平端BRS 黄铜BrassBRZ 青铜BronzeBS 英国国家标准BSE 小端开坡口BU 内外螺纹接头BushingBUV 蝶阀Butterfly valveBV Ball Valve球阀BV Butterfly valve 蝶阀BV 呼吸阀Breather valveBW Butt Weld 对焊BW 对焊Butt weldingBWF butt weld flange 对焊法兰BWG Birmingham Wire Gage 伯明翰线规C Cap 管帽C 保冷Cold insulationC.I Cast Iron 铸铁C.R. Concentric Reducer 同心异径管C.S. Carbon Steel 碳钢C.S. Cold Spring 冷紧C.S.C. Car Seal Close 在关闭状态下封住C.V Check Valve 止回阀CA 侵蚀裕度Corrosion allowance CAS 中国标准化协会标准CAS 铸钢Cast steelCB 中国造船总公司标准C-C Center to Center 中至中C-E Center to End 中至端面CE 焊条Covered electrodeC-F Center to Face 中至面CH.PL Checkered Plate 花纹钢管CH-OP Chain Operated 链条操纵的CHOP 链条操作Chain operated CHV 止回阀Check valveCI Cast Iron铸铁CI 铸铁Cast ironCL Class 英制压力品级，品级，种类CL 品级ClassCL 净距（净空）ClearanceCL(屯) 中心线Center lineCLAS 低合金铸钢Cast low alloy steel CLEAR Clearance 间隙CM 色标Colour markCN 建北Construction northCO 清洗口Clean outCOD Continued on Drawing 接续图COFF 围堰CofferdamCOL Column 柱，塔CONC Concentric 同心的CONN Connection 连接，接口CONT.V. Control Valve 操纵阀COP 管中心Center of pipeCP 管帽（封头）CapCPL 管箍CouplingCPLG Coupling 管接头，连轴节CR 同心异径管接头（同心大小头）Concentric reducer CS CARBON STEEL 碳钢CS 碳钢Carbon steelCSC 铅封关Car seal closeCSO 铅封开Car seal openCSP 冷紧Cold springCTC 中心至中心Center to centerCTE 中心至端部Center to endCTF 中心至面Center to faceCU 紫铜CopperCUST Customer 客CV Check Valve 止回阀CV 调剂阀Control valveCVA 中国阀门行业标准CW 持续焊Continuous weldingD 直径DiameterDEDD 详细工程设计数据Detail engineering design data DEG Degree 度DF Drain funnel 排液漏斗DF 排液漏斗Drain funnelDI 球墨铸铁Ductile ironDIA Diameter 直径Diaphragm VELVE 隔膜阀DIM Dimension 尺寸DIM 尺寸DimensionDIN 德国国家标准DIS 排出（口）DischargeDISCH Discharge 出口，排出DMF Double Male And Female 双重凹凸DN Down 下DN Nominal Diameter公称直径DN 公称直径Nominal diameterDR Drain 排液DR 排液DrainDRL--double random length (也确实是12米左右) DS Directional Stop 定向限为架DTL 详图DetailDV 隔膜阀DWG Drawing 图DWGI 所在图号Drawing identificationDWGNO 图号Drawing numberE 东EastE.R. Eccentric Reducer 偏心异经管EC External Coating 外面涂防腐层ECC Eccentric 偏心EFW Electric Fusion Welded 电容焊的EFW 电熔焊Electric fusion weldingEIT 检查、探伤和实验Examination, inspection & testing EJ （原）核工业部标准EJ 补偿器Expansion jointEL 标高ElevationEL 弯头ElbowEL(ELEV) Elevation 标高；立面ELL Elbow 弯头ELL 长半径弯头Long radius elbowELS 短半径弯头Short radius elbowEQIOP Equipment 设备，装置EQUIV Equivalent 相当的ER 偏心异径管接头（偏心大小头）Eccentric reducer ERW Electric Resistance Welded 电阻焊的ERW PIPE: 是高频直缝焊管ERW 电阻焊Electric Resistance weldingESEW 事故洗澡洗眼器Emergency shower and eye washer EST 蒸汽外伴热External steam tracingET 电伴热Electric tracingETE 端到端End to endEW Eye Washer & Shower 洗眼器及淋浴器EXP.JT Expansion Joint 膨胀节F 现场FieldF/F 现场制造Field fabricatedFF 全平面密封Flate FaceFA 阻火器Flame arresterFC flange cover 法兰盖FCPL 双头管箍Full couplingFDN Foundation 基础FEF 法兰端面Flange and faceF-F Face To Face 面至面FF Flat Faced Or Full Faced 全平面；满平面FF Full Face 平面管道法兰FF 全平面Flat faceFGW Fusion Gas Weld 气熔焊FIG Figure 图FL Floor 楼面FL 楼板FloorFLAS 低合金锻钢Forged low alloy steel FLEX TUBE Flexible Tube 挠性管FLG Flange 法兰FLGD Flanged 法兰式的FLGF Flanged Face 法兰面FM 凹面密封FMG 金属平垫片Flat metallic gasket FOB Flat On Bottom 底面平FOB 底平Flat on bottomFOT Flat On T op 顶面平FOT 顶平Flat on topFP Fix Point 固定点FS Forged Steel 锻钢FS 锻钢Forged steelFSF 法兰密封面Flange scaling face FTF Fitting To Fitting 管件直连FTF 面到面Face to faceFTG Fitting 管件FURND Furnished 提供的，装设的FW Field Weld 现伤焊FW 现场焊接Field weldingG Guide 导向G 表压G 垫片GasketGA Gage 表，表压，规（线规）GALV Galvanize 镀锌GB 国家标准GB/T 国家推荐标准GBn 国家标准（内部发行）GEAR OP Gear Operated 齿轮传动的GF 槽面Groove faceGJB 国家军用标准GL Ground Level 地面GLV Globe Valve 截止阀GLV 截止阀Globe valveGMAW Gas Metal Arc Weld 金属极惰气体爱惜焊GR.B.--grade b（B品级）GRD 地坪GroundGSAW 气体爱惜电弧焊Gas shielded-arc weldingGSKT Gasket 垫片GTAW (Inert)Gas Tungsten Arc Weld 惰性气体爱惜钨极电弧焊GV Gate Valve 闸阀GV Globe Valve 球心阀GV 闸阀Gate valveGW 气焊Gas weldingH Hanger 吊架H 保温Hot insulationH 高压管、管件及紧固件通用设计标准H 水平HorizontalH.CPLG Half Coupling 半节管接头H.P High Pressure 高压HADT 硬度实验Hardness testing HB 布氏硬度Brinnel hardnessHB 航空工业部标准HC Hose Connection 软管接头HC 软管接头Hose couplerHCPL 单头管箍Half couplingHDR Header 总管HEX Hexagon 六角形HF Hard Alloy Face on阀内件（阀心）HG 化学工业部标准HH Hand Hole 手孔HOR Horizontal 水平的HP 高点High pointHP 高压HS Hose Station 软管HS 软管站Hose stationHT 热处置Heat treatmentHYDT 水压实验Hydraulic testingI.S.B.L Inside Battery Limit 装置边界内恻ID Inside Diameter 内径ID 内径Inside diameterIN Inch 英寸INF 信息（资料）InformationINS Insulation 隔热INS 隔热Thermal insulationINST Instrument 仪表INV Invert (inside bottom of pipe) 管子内底IPS Iron Pipe size 铁管尺寸IR 内定位环Inner ringIR/OR 内外定位环Inner ring and outer ring ISNS Inside screw & Non-rising Stem 内螺纹非升杆ISO Isometric Drawing 周测图（空视图）ISO 国际标准ISRS Inside screw & Rising stem 内螺纹升杆IST 蒸汽内伴热Internal steam tracingJB 机械行业标准（原）机械工业部标准JB/TQ 机械电子工业部通用机械行业内部标准JB/Z （原）机械工业部指导性文件JC 国家建材局标准JIS 日本工业标准JJC 国家计量局标准JOB. No. 工号Job NumberJPI 日本石油学会标准JS Jack Screw 顶开（起）螺栓JT Joint 接头JZ、JG 城乡环境爱惜部标准L.H.THD Left Hand Thread 左螺纹L.P. Low Pressure 低压LAS 低合金钢Low alloy steelLC Locked Closed 在关闭状态下锁定LC 锁闭Lock closedLD 劳动人事部标准LEP Large end plain 大端为平的LER 透镜式金属环垫Lens ring gasket LET Large end Threaded 大端带螺纹LF 凹面Female faceLG Long 长LGF Lens Gasket Face 透镜垫连接面LIFT Lift Type 起落式LJ Lap Joint 搭接LJ 松套法兰Lapped joint flangeLJF Lap Joint Flange 松套法兰LM 管道混合器Line mixerLM 凸面Male faceLO Locked Open 在开启状态下锁定LO 锁开Lock openLOW 材料表List of materialLP 低点Low pointLP 松套法兰LPI (PT) 液体渗透查验Liquid penetrate inspection (test) LR Long Radius 长半径LRE Long Radius Elbow 长半径弯头LT 斜三通Lateral teeLTG Large Tongue & Groove 大椎槽LW 搭接焊Lap weldingM 金属材料Metallic materialM.L Match Line 持续线M.W. Mineral Wool 矿（物）棉MATL Material 材料MAX Maximum 最大MB Machine Bolt 机械螺栓（单头）MEL 斜接弯头（虾米腰弯头）Mitre elbowMF Male and Female 凸和凹MF Manufacture 制造厂MFF 凹凸面Male and female faceMFG Manufacture 制造MFM female and male flange 凹凸法兰MG 金属垫片Metallic gasketMH Manhole 人孔MHR 工时Man hourMI Malleable Iron 可锻铸铁MI 可锻铸铁Malleable ironMIL 美国军用标准MIN Minimum 最小MJ Mechanical Joint 机械接头MJG 金属包垫片Meta-jacket gasketML 接续分界限Match lineML 手动Manual controlMO 混合孔板Mixing orificeMPI (MT) 磁粉探伤Magnetic particle inspection (test)MSS Manufacturers Standardization Society of the Valve and Fittings Industry, Inc. 美国阀门和管件制造商标准化协会MSS 美国阀门和管件制造厂标准化协会标准MT 煤炭工业部标准MTO Material take-off 材料统计汇料MW Minimum Wall 最小壁厚N 北NorthN.B. Non-Bonnet 无阀盖NACE MR-0175--是一种防腐的标准NB Nominal Bore 公称孔径NC Normally Closed 常闭NC 正常关Normally closeNF neck flange 带颈法兰NF 法国国家标准NIP Nipple 短管NIP 短节Pipe nipple or straight nippleNMG 非金属垫片Non-metallic gasketNO INS No Insulation 不隔热NO Normally Open; 常开NOM Nominal 公称的；额定的NOZ Nozzle 管口NPS Nominal Pipe Size 公称管径NPS 美国标准直管螺纹National standard straight pipe thread NPSH Net Positive Suction Head 净正吸入压头NPT American National Taper 美国锥管螺纹Pipe ThreadNPT 美国标准锥管螺纹National standard taper pipe thread NS Nominal Size 公称直径NU 螺母NutNV Needle Valve 针形阀NV 针形阀Needle valveOCR 八角形金属环垫Octagonal ring gasketOD Outside Diameter 外径OET One end Threaded 一端带螺纹OR Outside Radius 外半径OR 外定位环Outer ringORF Orifice 孔板ORIENT Orientation 方位OS & Y Outside Screw and Yoke 外螺纹阀杆和阀轭OSNB Outside Screw Non-Bonnet 外螺纹无阀盖OVR 椭圆形金属环垫Oval ring gasketP Plug 堵头P 防烫伤隔热Personnel protection insulationP 管子PipeP 压力PressureP.C.D. Pitch Circle Diameter 节圆直径PAP Piping Arrangement Plan 管道布置平面图P-B Plain End –Bevel End 平端—坡口端PB Pressure Seal Bonnet 压力密封的阀盖PBE 两段平端PC Pressure Seal Cap 压力密封的阀帽PD 打扫设施Purge devicePE Plain End (not beveled) 平端（无坡口）PE plain end 平端PE 平端面Plain end 1PF 平台PlatformPFD 工艺流程图Process flow diagramPH 预热PreheatingPJ/PR(或PJ/RJ) 活套环法兰PID Piping & Instrument Diagram管道及仪表流程图PID 管道和仪表流程图Piping & instrument diagram PL 管堵（丝堵）PlugPL 板式法兰PlatePLE plain small end 小端平端PLE 大端坡口PLG 法兰FlangePN Nominal Pressure 公称压力PN Plant North 工厂北向PN 公称压力Nominal pressurePNET 气压实验Pneumatic testingPOS point of Support 支承点P-P Plain End—Plain End 两头为平端PR 管桥Pipe rackPREP Preparation 加工预备PRV 泄压阀Pressure relief valvePS 管道支架（管架）Piping supportPSIA Pounds Per Square Inch Absolute 磅/ PSIG Pounds Per Square Inch Gage 磅/PSL是表示该项下的管线管所利用的技术标准品级: PT Point 点PT 池PitPT.EL 点标高Point elevationPT.NO Part No. 件号PTFE Polytetrafluoroethylene 聚四氟乙烯PV Plug Valve 旋塞阀PV 旋塞阀Plug valve (cock)PVC Poly Vinyl Chloride 聚氯乙烯PWHT 焊后热处置Post weld heat treatment Q/TH （原）机械工业部化工通用机械专业标准QB、SG 轻工业部标准QJ 航天工业部标准QTY Quantity 数量R Radius 半径R 异径管接头（大小头）Reducer R.E 偏心异径管R.H.THD Right Hand Thread 右螺旋RC Conc.reducer 同心大小头RC 洛氏硬度RCPL 异径管箍Reducing coupling RD 爆破片（爆破膜）Rupture disk RE Ecc.reducer 偏心大小头RED Reducer 异径管REDF 异径法兰Reducing flange REF DWG 参考图Reference drawing REF Reference 参考REINF Reinforce 增强REL 异径弯头Reducing elbow REQD Required 需要；申请REV Revision 修改REV. No. 修改号Revision number RF Raised Face 凸面RF Raised Face 凸面管道法兰凸面RG Ring Gasket 环形垫片RG 橡胶垫片Rubber gasketRI (RT) 射线探伤Radiographic inspection (test) RJ Ring Joint Face 环连接面管道法兰环连接面RJ Ring Joint 环垫接头RJ 环连接面Ring joint faceRJ 梯型槽密封Ring JointRO Restriction Orifice 限流孔板RO 限流孔板Restriction orificeRP 补强板Reinforcing padRPM Revolutions Per Minute 转/分RPS Revolutions Per Second 转/秒RS Resting Support 支承架，滑动架RT 异径三通Reducing teeRTG （压力）品级RatingRTJ Ring Type Joint（见RJ）RV Relief Valve 平安泄液阀RV 减压阀Pressure reducing valveS Spring 弹簧（管架用）S 南SouthSAW (Automatic)Submerged Arc Weld 自动埋弧焊SAW PIPE: 是高频埋弧焊管SB 8字盲板Spectacle blind (blank)SB Screwed Bonnet 螺纹阀盖SB Stud Bolt 双头螺栓SB 螺柱Stud boltSC Sample Cooler 取样冷却器SC 采样接口Sample connection SC 取样冷却器Sample cooler SCH Schedule 管壁厚系列号SCH 表号Schedule numberSCH40--管件的壁厚SCRD Screwed 螺纹SD 水力电力部标准SE 翻边短节Stub endSEP Small end Plain 小端为平的SEQ 序号（顺序）SequenceSET Small end Threaded 小端带螺纹SEW 密封焊Seal weldingSF Semi-Finished 半光SF Slip on flange 平焊法兰SF 现场决定Suit in fieldSFG 堆焊SurfacingSG Sight Glass 视镜SG 视镜Slight glassSGV 插板阀SH Surface Hard Facing 硬质密封面SHLT 棚ShelterSIL 消声器SilencerSJT 蒸汽夹套伴热Steam-jacket tracingSK Sketch 草图SM SEAMLESS PIPE--无缝管件SMAW Shielded Metal Arc Weld 有爱惜的金属电弧焊SMG 半金属垫片Semi metallic gasketSMLS Seamless 无缝SMSG 齿形金属垫片Solid metal serrated gasketSN Swaged Nipple 异径短管SNIP 异径短节Swaged nippleSO Slip –On 滑套SO 蒸气吹扫（口）Steam outSOF Slip –On Flange 滑套法兰SOF 平焊法兰Slip-on flangeSPDWG(ISODWG) 管段图Spool drawing (each line isometric drawing) SPEC Specification 规定，说明SPL Sound Pressure Lever 升压水准SPR 气液分离器SeparatorSQ Square 方的，平方SR Shout Radius 短半径SR 短半径SR 过滤器StrainerSR 应力排除Stress reliefSRB 桶式过滤器Bucket type strainerSRE Short Radius Elbow 短半径弯头SRFF Socket Raised Face Flange 承插凸面法兰SRT T型过滤器T-type strainerSRY Y型过滤器Y-type strainerSS Stainless Steel 不锈钢SS 不锈钢Stainless steelST Steam Trap 蒸汽疏水阀ST 蒸汽疏水阀Steam trapSTD Standard 标准STD 标准StandardSTG Small Tongue & Groove 小椎槽面STL Steel 钢STM Steam 蒸汽STM.TR Steam Tracing 蒸汽拌热STRU 构架（构筑物）StructureSUC 吸入（口）SuctionSUCT Suction 吸入口SV Safety Valve 平安泄气阀SV 平安阀Safety valveSW Socket Weld 承插焊SW 承插焊Socket weldingSWF 承插焊法兰Socket-welding flangeSWG Swage 锻造，模锻SWG 缠绕式垫片Spiral wound gasket SWMG Swing Type 旋启式SWSR 弹簧垫圈Spring washerSY （原）石油部标准SYM Symmetrical 对称的SYM 对称的SymmetricalT Tee 三通T 管道伴热（冷）TracingT 螺纹法兰Threaded flangeT 温度TemperatureT&I 伴热Tracing and insulationTC Tee (C ) 等径三通TE Threaded End 螺纹端TEG 聚四氟乙烯包复垫片PTFE envelope gasket TEMP Temperature 温度TF 榫面Tongue faceTG Tongue & Groove 椎槽TG 榫槽面Tongue and groove face TG 槽面密封THD Threaded 螺纹的TH 螺纹法兰TH Threaded 螺纹的THK Thickness 厚度THR 螺纹ThreadTL T angent Line 切线TN True North 真实北向TR Tee ( R ) 异径三通TOC Top of Concrete 混凝土北向Top of Steel 钢结构顶面TOP Top of pipe 管顶TOS Top of Support 支架顶面TSR 临时过滤器Temporary strainer TW 定位焊Tack weldingTWV 三通阀TYP Typical 典型的UB Union Bonnet 带活接头的阀盖UC Union Cap 带活接头的阀帽UC 公用工程接头Utility connection 1 UG 地下UndergroundUI (UT) 超声探伤Ultrasonic inspection (test) UN Union 活接头UTL 公用系统UtilityV Valve 阀V 竖直、铅直、直立VerticalVAC Vacuum 真空VAR Variable 可变的VE 外观检查Visual examinationVERT Vertical 垂直的VOL Volume 卷，册，容量，体积VT vent 放空放气W 焊接WeldingW 西WestW.P. Working Point 工作点W/E 设备带来With equipmentW/I 仪表带来With instrumentWB Weld Branch 焊接支管WC Weld Cap 焊接管帽WD Width 宽度WE Weld End 焊接端WL Weld Line 焊接线WN Weld Neck 对焊法兰（颈部）WNF Weld Neck Flange 对焊法兰WNF 对焊法兰Welding neck flangeWP Working Pressure 工作压力WSR 垫圈WasherWT Wall Thickness 壁厚WT 重量WeightWW 焊丝Welding wireXH Extra Heavy 增强的，加厚的XS Extra Strong 增强的XXH Double Extra Heavy 双倍增强（厚）的XXS Double Extra Strong 双倍增强的XXS 特强Double extra strongYB 冶金部标准YP Yield Point 屈服点ZB 行业标准（专业标准）ZBn 行业标准（内部发行）ZJB 专业军用标准。
紧固件各国标准对照
GB834-88 GB806-88
47 DIN467 滚花薄螺母
knurled thumb thin nuts
GB807-88
48 DIN470 锁紧垫圈
sealing washers
49 DIN471 轴用弹性挡圈 50 DIN472 孔用弹性挡圈
91 DIN911 内六角扳手
socket wrenches
ISO2936
92 DIN912 内六角圆柱头螺钉
hexagon socket cap screws
ISO4762
93 DIN913 内六角平端紧定螺钉
hexagon socket set screws with flat point
ISO4026
round nuts with drilled holes in one face
slotted sit screws with flat point
ISO4776
GB817-76 GB815-88 GB73-85
60 DIN553 开槽锥端紧定螺钉
slotted set screws with cone point ISO7434
ISO3266 GB825-76
68 DIN582 吊环螺母
lifting eye nuts
69 DIN601 六角头螺栓
hexagon bolts
ISO4016
70
DIN603
大半圆头方颈螺栓(马车螺 mushroom head square neck bolts
栓)
(carriage bolts)
T-slot nuts
ISO299
螺丝常用国家标准
常用的国家标准螺柱常用国家标准GB27六角头铰制孔用螺栓GB70内六角园柱头螺钉GB798活节螺栓（粗制）GB799地脚螺栓（粗制）GB897、GB898、GB899、GB900双头螺柱GB901等长双头螺柱GB953等长双头螺柱（粗制）GB5780六角头螺栓——C级GB5781六角头螺栓——全螺纹—C级GB5782六角头螺栓——A、B级GB5783六角头螺栓——全螺纹—A、B级GB5784六角头螺栓——细杆—B级GB5785六角头螺栓——A、B级GB5786六角头螺栓——细牙—全螺纹—A、B级GB5787六角法兰面螺栓——B级GB5788六角法兰面螺栓——细杆—B级GB5789六角法兰面螺栓——加大系列—B级GB5790六角法兰面螺栓—加大系列—细杆—B级GB1228大六角头螺栓（钢结构用高强度）螺母常用国家标准GB41 Ⅰ型六角螺母——C级GB6170 Ⅰ型六角螺母——A、B级GB6171Ⅰ型六角螺母—细牙—A、B级GB6172六角薄螺母——A、B级—倒角GB6173六角薄螺母——细牙—A、B级GB6174六角薄螺母——B级—无倒角GB6175Ⅱ型六角螺母——A、B级GB6176Ⅱ型六角螺母——细牙—A、B级GB6177六角法兰面螺母—A级GB56六角厚螺母GB1229大六角螺母（钢结构用高强度）螺栓螺柱企标、部标外标HG20613钢制管法兰用紧固件标准（美洲体系）HG20634钢制管法兰用紧固件标准（欧洲体系）SHJ404-88管法兰用紧固件（中石化公司）HGJ75-91化工机械部标准（螺栓、螺柱、螺母）HGJ524-91/A1-1化学工业部标准（公制管用，U型螺栓）HGJ524-91/A1-2化学工业部标准（英制管用，U型螺栓）HGJ524-91/A2-1化学工业部标准（公制管用，带角钢U型螺栓）HGJ524-91/A5-1化学工业部标准（公制管用、基准型双头螺栓管夹）HGJ524-91/A7-1化学工业部标准（保温管用、三螺栓管夹）HGJ524-91/A8-1化学工业部标准（支杆用、三螺栓管夹）HGJ524-91/A9-1化学工业部标准（公制管用、双排螺栓管夹）HGJ524-91/A10-1化学工业部标准（公制管用、四螺栓管夹）HGJ524-91/A12-1化学工业部标准（保冷管用、管卡）HGJ524-91/A13-1化学工业部标准（保冷管用、双螺栓管夹）HGJ524-91/A14-1化学工业部标准（保冷管用、四螺栓管夹）HGJ524-91/A16-1化学工业部标准（吊环型吊杆）HGJ524-91/A19化学工业部标准（U型吊耳）GD0531水利电力部标准（双头螺柱）GD0532水利电力部标准（六角螺栓）H15化工机械部标准（拧入式用双头螺栓）H16化工机械部标准（等长双头螺柱）JB1164-73机械部标准（压力容器用等长双头螺柱）JB9-59机械部标准（光双头螺柱）JB2773机械部标准（Pg160-320kg/cm2双头螺柱）JB2774机械部标准（Pg160-320kg/cm2阶端双头螺柱）JB4707机械部标准（等长双头螺柱）SY10-76上海压力容器厂标准（阶端双头螺柱）SY11-76上海压力容器厂标准（双头螺柱）871G1-4南化集团设计院标准（锚固螺栓尺寸表M16-M36）871G1-5南化集团设计院标准（锚固螺栓尺寸表M39-M100）DIN931-70德国标准（六角头螺栓）DIN2510/3-74德国标准（拧入式—L、K、KU、Z双头螺柱）DIN2510/4-74德国标准（拧入式—GH、P、Q、RS双头螺柱）ASNI/ ASMEB18.2.1美国标准（六角头螺栓、螺柱）螺母国家标准螺母部标企标外国标准HG20613-97钢制管法兰用紧固件（美洲体系）HG20634-97钢制管法兰用紧固件（欧洲体系）SHJ404-88中石化公司标准（管法兰用紧固件）HGJ75-91化工机械部标准（螺母）GD0534水利电力部标准（厚六角螺母）GD0535水利电力部标准（六角螺母）H17-67化工机械部标准（螺母）JB2770-79机械部标准（Pg160-320kg/cm2接头螺母）JB2775-79机械部标准（Pg160-320kg/cm2螺母）JB2954-81机械部标准（汽轮机罩螺母技术条件）SY15-76上海压力容器厂标准（高压六角螺母）DIN2510/5-74德国标准（螺母）DIN2510/6-74德国标准（长螺母）ASME/ASNIB18.2.2美国标准（螺母）常用紧固件材料规范GB699碳素结构钢材料技术条件GB700优质碳素结构钢材料技术条件GB1220不锈钢材料技术条件GB1221不锈钢材料技术条件GB3077合金结构钢材料技术条件ASTM.A193/A194M-96a美国试验与材料学会标准（高温用合金钢和不锈钢螺栓材料的标准规范）ASTM.A194-96A美国试验与材料学会标准（与高温、高压用螺栓相配的碳钢和合金钢螺母标准规范）ASTM.A320/A320M-92美国试验与材料学会标准（低温用合金钢螺栓材料技术条件）ASTM.A307-93a美国试验与材料学会标准（σb为414Mpa碳钢螺栓与双头螺柱技术条件）ASTM A325-93a美国试验与材料学会标准（σb≥827Mpa/724Mpa热处理结构钢螺栓技术条件）ASTM A354-93美国试验与材料学会标准（淬火并回火的合金钢螺栓、双头螺栓和其他螺纹紧固件技术条件）ASTM A563/A563M-84美国试验与材料学会标准（碳钢和合金钢螺母技术条件）Q/BU.J.1517-95(核工业第二研究设计院标准)压水堆核电厂2.3级设备中螺钉类紧固件和阀杆用锻轧棒技术条件Q/BU.J.1518-95（核工业第二研究设计院标准）压水堆核电厂2.3级设备中螺母用锻轧棒技术条件MSH3-92（上海核工程研究设计院标准）核安全2.3级设备螺栓紧固件用42CrMo\40CrMoV锻轧棒技术条件。
NF F螺栓拧紧方法 25035-9601812-72
法国标准NF F 01-812-1，1990年9月铁路车辆——电弧焊和电阻焊钢的焊接接头第1部分：对接接头和角接接头的接受标准南京浦镇车辆厂—1 —二○○一年十月—2 —法国标准NF F 01-812-11990年9月铁道车辆—电弧焊和电阻焊钢的焊接接头第一部分：对接接头和角接接头的接受标准法国标准化协会总会长于1990年8月5日决定批准，并于1990年9月5日生效的法国标准。
对应：自本标准公告之日起，就不存在论述相同主题的欧洲标准或国际标准。
概要：本标准已经实现对参与完成铁道车辆的焊接接头接受标准的明确规定。
描述符：国际上技术同义词词汇：铁道车辆、钢、焊接接头、电焊、电阻焊、对接焊、角焊、可接受性、焊接铁陷。
修改：校正：铁道标准化局（BNCF）出版，15 rue Traversière 75571 PARIS CEDEX 12 tél: (1) 40 19 15 03BNCF和法国标准化协会（afnor）发行，tour europe CEDEX 7 92049 Paris la défense tél: (1)42 91 55 55 MIT照相排版90年9月1次印刷—3 —前言本标准构成标准文件集的第一部分，该文件集是归类在相同指数F01-812下，与供完成铁道车辆使用的焊接接头的接收标准有关的标准文件集。
本标准规定的接收标准是建立在1984年1月的ST-M 810 A，SNCF（法国国营铁路公司）器材的技术规范的接收标准的基础上。
目录1．目的 (3)2．适用范围 (3)3．参考文件 (3)4．焊接接头的分类 (3)5．缺陷的专门名词 (3)6．对接焊的接受标准 (3)7．角焊的接受标准 (9)—4 —1．目的：本标准确定了供完成铁道车辆使用的焊接的接收标准。
在标准NF F 01-810中规定了焊接的设计和实现规则。
2．适用范围：本标准适用于对于铁道车辆结构的钢部件，电弧焊和电阻焊完成的焊接接头。
法国金属材料
法国金属材料法国金属材料牌号表示方法简介一、法国标准中有色金属牌号表示方法法国国家标准编号由法国国家标准（NF ）大类字母代号、小类数字代号、序号和制定年份组成，例如NF-A51-100-83 （A 代表冶金，51 代表铜和铜合金半成品）。
有关材料牌号表示方法见下表。
法国标准中有色金属牌号表示方法二、法国NF 标准的钢号表示方法NF 是法国标准（Normes Francaises ）的标准代号，它是由法国标准化协会（AFNOR ）制订的。
现将各类钢的钢号表示方法介绍如下：1. 非合金钢和碳素钢这类钢通常是指除C 和Fe 以外，钢中残余元素的含量（% ）均不得超过表1.19 中的数值，表中未列出的其它残余元素的含量亦不得超过0.1% 。
表1.191.1 普通钢（A 类钢）：（1）AD ×钢：这是一般商品钢，要求有一定延展性，抗拉强度为33 ～50kgf/mm 2 , 弯曲试验（90 o ）直径=4 ×厚度。
（2）其它类钢：其钢号表示方法是1) 钢号开头为“ A ”，表示一般用钢。
2)“ A ”后面的数字是表示抗拉强度（kgf/mm 2 , 或N/mm 2 ,）不低于该数值；其数字所表示的抗拉强度范围如表1.20 所示。
表1.203) 专门用途的钢在数字后再标出以各种大写字母来表示。
例如：T—结构用钢，N —船体用钢，C —锅炉或受压装置用钢，BA —混凝土用钢。
4) 钢号最后所标的数字，表示钢的质量等级；其符号共有七种：1 ，2 ，2bis ，3 ，3 bis ，4 ，4 bis （× bis 表示冷加工状态的）。
而每一种质量符号都有其相应的质量指数N 。
常用质量等级为N o 1 ，N o 2 ，N o 3 ，No4 ，其相应的各钢种的质量指数N 列于表1.21 。
表1.21 各铜号的质量指数根据N=R+2.5A 这一公式（式中：R —抗拉强度，kgf/mm 2 ；A —延伸率，% ），并查考表1.20 和表1.21 ，就可以从钢号上推算出钢的抗拉强度和延伸率。
螺栓标准对照表
DIN EN ISO 8765
GB/T 5785-2000
DIN 960
Hexagon head bolts with fine pitch thread - Product grades A and B(ISO 8765:1999)
六角头螺栓细牙
DIN EN ISO 4032
GB/T 6170-2000
2型六角螺母
DIN EN ISO 4034
GB/T 41-2000
DIN 555
Hexagon nuts - Product grade C (ISO 4034:1999)
六角螺母C级
DIN EN ISO 4035
GB/T 6172.1-2000
DIN 439-2
Hexagon thin nuts(chamfered)-Product grade A and B (ISO 4035:1999)
Hexagon nuts,style 1,with metric fine pitch thread - Product grades A and B (ISO 8673:1999)
1型六角螺母细牙
DIN EN ISO 8674
GB/T 6176-2000
DIN 971-2
Hexagon nuts,style 2,with metric fine pitch thread - Product grades A and B (ISO 8674:1999)
Hexagon washer head drilling screws with tapping screws thread (ISO 15480:1999)
六角凸缘自钻自攻螺钉
IDN EN ISO 15481
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
NF A49-580-1988
NF A87-021-1998
NF A89-600-1998
NF E04-014-1933
NF E25-011-1992
NF E25-022-1-2001
分:产品等级 A、B 及 C
Part 1 : product grades A, B and C.)
NF E25-023-1992
NF E27-341-1973
商业性通用螺栓制造.“木 (BOLTS FOR TIMBER.) 结构”螺栓 (COUNTERSUNK OR RAISED COUNTERSUNK 商业性通用螺栓制造.埋 HEAD BOLTS (NIB OR 头或凸圆埋头木螺栓 SQUARE NECK) FOR TIMBER.) (ROUND HEAD 商业性通用螺栓制造.凸 NECK 圆头方颈螺栓 (“JAPY“ TYPE).) SQUARE BOLTS
NF E25-100-1-1999
NF E25-100-3-1992
NF E25-100-4-1992
NF E25-100-6-1998
NF E25-100-7-1995
NF E25-112-2001 NF
E25-113-1992
缩杆制品
Product grade B. Reduced shank (shank diameter = pitch diameter).) (Hexagon head bolts - Product grade C.)
NF E25-800-1-1994
NF E25-800-2-1994
NF E25-800-3-1994
NF E25-800-4-1994
NF E27-000-1972 NF E27-312-1959 NF E27-313-1959
商业性通用螺栓制造.圆 (CHEESE BOLTS.) 柱头粗制或精制螺栓
商业性通用螺栓制造.圆 头粗制或精制螺栓.直径 (ROUND HEAD NIB BOLTS.) 从４到６０mm 商业性通用螺栓制造.埋 (COUNTERSUNK OR 头或凸圆埋头铁制粗制或 RAISED COUNTERSUNK 精制螺栓.直径４到６０ HEAD NI-314-1959
法国螺栓标准(NF bolt standards) 法国螺栓标准
ANSI | BS | DIN | EN | GB | | DIC ISO | JIS | NF
编号 NF A47-251-5-2003
中文名称
英文名称
(Terminations for steel wire 钢丝绳接线端.安全.第 5 ropes - Safety - Part 5 : U-bolt 部分:U 形螺栓拉线器 wire rope grips.) (Cooplers, loose spigots and 钢管脚手架和支承架用联 base-plates for use in working 结件、中心螺栓和踏板. scaffolds and falsework made of steel tubes. Requirements and 要求和测试程序 test procedures.) 焊接.弧双端螺栓焊接的 (Welding. Studs and ceramic 双端螺栓和陶瓷箍.(欧洲 ferrules for arc stud welding.) 标准 EN ISO 13918) (WELDING. ARC STUD 焊接.金属材料的弧双端 WELDING OF METALLIC 螺栓焊接 (欧洲标 准 EN MATERIALS. (EUROPEAN ISO 14555) STANDARD EN ISO 14555).) (TECHNICAL DRAWINGS FOR 机械、电气和相关工业的 MECHANICAL,ELECTRICAL 技术图，构架的铆钉和螺 AND CONNECTED 栓的图上符号表示法（１ INDUSTRIES. GRAPHICAL ９８１．９确认） SYMBOLS ON DRAWINGS FOR RIVETS AND BOLTS.) (MECHANICAL PROPERTIES OF BOLTS, 紧固件的机械特性.由非 FASTENERS. 亚铁金属制造的螺栓,螺 SCREWS, STUDS AND NUTS MADE OF NON-FERROUS 钉,柱螺栓和螺母 METALS. (EUROPEAN STANDARD EN 28839).) 紧固件公差.螺栓、螺钉、 (Tolerances for fasteners 双头螺栓和螺母.第 1 部 Bolts, screws, studs and nuts -
NF E25-115-1-2001
六角头螺栓.产品等级 C
NF E25-140-1994
(FASTENERS. ARC WELDING STUDS 紧固件.电弧焊接双端螺 LOADING. SYMBOL SA. AND 栓.符号 SA.尺寸和物理化 DIMENSIONS 学特性.拉制电弧焊接螺 PROPERTIES PHYSICAL-CHIMICAL. 栓系统 DRAWN ARC STUD WELDING SYSTEM.) (Hexagon head bolts with 米制细牙螺纹的六角头螺 metric fine pitch thread 栓.产品等级 A 和 B Product grades A and B.) (Tolerances for fasteners - Part 紧固件公差.第 3 部分:螺 3 : plain washers for bolts, 栓、螺钉和螺母用平垫 screws and nuts - Product 圈.A 级和 C 级 grades A and C.) (Hexagon bolts with flange with 米制细牙螺纹六角法兰面 metric fine pitch thread - Small 螺栓.小系列 series.) (HEXAGON BOLTS WITH 法兰六角型螺栓.小型系 FLANGE. SMALL SERIES. (EUROPEAN STANDARD EN 列 1662).) (HEXAGON BOLTS WITH 带法兰六角头螺栓.重形 FLANGE. HEAVY SERIES. (EUROPEAN STANDARD EN 系列(欧洲标准 EN 1665) 1665).) (Plain washers for metric bolts, 通用米制螺栓、螺钉和螺 screws and nuts for general 母用平垫圈.一般示意图 purposes - General plan.) 紧固件.波纹钢管用螺栓. (FASTENERS. BOLTS FOR STEEL 第 0 部分:按要求所制的螺 CORRUGATED PIPES. PART 0 : BOLTS 栓
NF E25-152-2001
NF E25-501-2000
NF E25-504-1-2003
NF E25-504-1998
NF E25-505-1997
NF E25-525-2000
NF E25-800-0-1994
RELATED PRESCRIPTIONS (SCREWS + NUTS).) (FASTENERS. BOLTS FOR CORRUGATED STEEL 紧固件.波纹钢管用螺栓. PIPES. PART 1 : HEXAGON 第 1 部分:带法兰或不带法 HEAD SCREWS WITH OR 兰,带尖或不带尖的六角 WITHOUT FLANGE, WITH 头螺钉.产品等级 A OR WITHOUT NIBS. PRODUCT GRADE A.) (FASTENERS. BOLTS FOR CORRUGATED STEEL 紧固件.波纹钢管用螺栓. PIPES. PART 2 : CHEESE 第 2 部分:带尖或不带尖的 HEAD SCREWS, WITH OR 圆头螺钉.产品等级 A WITHOUT NIBS. PRODUCT GRADE A.) (FASTENERS. BOLTS FOR CORRUGATED STEEL 紧固件.波纹钢管用螺栓. PIPES. PART 3 : CONVEX 第 3 部分:不带法兰的凸形 HEXAGON NUTS WITHOUT 六角螺母.产品等级 C FLANGE. PRODUCT GRADE C.) (FASTENERS. BOLTS FOR CORRUGATED STEEL 紧固件.波纹钢管用螺栓. PIPES. PART 4 : CONVEX 第 4 部分:带法兰的凸形螺 HEXAGON NUTS WITH 母.产品等级 C FLANGE. PRODUCT GRADE C.) 螺栓、螺母及附件.术语 (Bolts, nuts and accessories.nomenclature.) HEAD NIB
紧固件.螺栓和螺钉的自 (Fasteners. Clearance hole for bolts and screws.) 由尺寸孔 (Mechanical properties of 碳钢合金制成的紧固件的 fasteners made of carbon steel 机械性能.第 1 部分:螺栓、 and alloy steel - Part 1 : bolts, 螺钉和螺柱 screws and studs.) (FASTENERS. SURFACE DISCONTINUITIES. PART 1 : SCREWS AND 紧固件.表面不连续性.第 BOLTS, FOR GENERAL 1 部分:一般要求的螺栓、 STUDS REQUIREMENTS. 螺钉和螺柱 (EUROPEAN STANDARD EN 26157-1).) (FASTENERS. SURFACE DISCONTINUTIES. PART 3 : 紧固件.表面不连续性.第 BOLTS, SCREW AND STUDS SPECIAL 3 部分:特殊要求的螺栓、 FOR REQUIREMENTS. 螺钉和螺柱 (EUROPEAN STANDARD EN 26157-3).) (Mechanical properties of 不锈钢紧固件耐腐蚀的机 corrosion-resistant 械特性.螺栓,螺丝和双端 stainless-steel fasteners. Part 1 : 螺栓 bolts, screws and studs.) (MECHANICAL PROPERTIES OF FASTENERS. PART 7 : 紧固件的机械性能.第 7 部 TORSIONAL TEST AND 分:公称直径 1-10mm 的螺 MINIMUM TORQUES FOR 栓和螺钉的扭力试验和最 BOLTS AND SCREWS WITH 小扭矩 NOMINAL DIAMETERS 1 MM TO 10 MM. (EUROPEAN STANDARD EN 20898-7).) 六角头螺栓.产品等级 A (Hexagon head bolts - Product grades A and B.) 和B 紧固件.六角头螺栓.B 级、 (Fasteners. Hexagon head bolts.