BTLY技术规格书
BTI Conveyor说明书
BTITHE NEW BELT CONVEYOR FOR THE GRAIN INDUSTRYBY ASKING THE PEOPLE WHO USE BELT CONVEYORS ON A DAILY BASIS, WE HAVE FOUND OUT WHAT THE MARKET DEMANDS AND NEEDS. THE RESULT IS AN INCREDIBLY WELL-DEVELOPED PRODUCT. WITH SKANDIA ELEVATOR’S SMART DESIGN AS A SIGNATURE, BTI IS BETTER, MORE EFFICIENT AND EASIER TO HANDLE THAN OTHER BELT CONVEYORS.HAVE WE DEVELOPED THE WORLD’S BEST BELT CONVEYOR?PROBABLY .BTI THE NEW BELT CONVEYOR FOR THE GRAIN INDUSTRYDischarge tripperBTI THE NEW BELT CONVEYOR FOR THE GRAIN INDUSTRYBETTER CONVEYINGBoth belt width as well as idler and drum widthare ISO-standardised and are set according to best practice in relation to capacity. The grain has plenty of space and the belt has good lateral travel. Naturally, the speed of the belt is also set according to best practice, and in addition, conveyors that are 20 metres long or more are equipped with tracking idler sets that ensure the belt control is improved on the return section. In addition, the centred loader is sealed with a PUR strip. In other words, no spill and more stable conveying of the grain.SIMPLER ADJUSTMENTThe tail end has generous adjustment travel which reduces the need to re-vulcanise the belt after a period of stretching. In addition, the idler width makes the conveyor less sensitive to precision in the vulcanisation itself. The carrying idler sets centre the belt by means of offset alignment and the positionof both carrying idlers can be adjusted individually for more precise belt travel settings and to adjust the offset alignment for reversible operation.SIMPLE ASSEMBLYAs always, we have made sure that the assembly is simple and smooth. Just like all Skandia Elevator products, BTI is part of a modular system. This facilitates assembly and adaptation thanks to controlled processes and good fit. The simple assembly, along with our production engineering, helps to create a straighter and more stable machine from the very start, something that has been in strong demand from the market.FLEXIBLEBTI is designed for all conceivable environments and installations, both outdoors and indoors. The self-supporting length is up to 6 metres. BTI is available in three different models and each model has two different capacities. So regardless of the size, each installation can have a belt conveyor that fits perfectly and does not consume more energy than necessary.UNEQUALLED QUALITYSkandia Elevator never compromises on quality. Only the best materials and components are used. This leads to more reliable operation, increased service lifeand lower repair costs. Drive endTracking idler setEventuell bildtexTail end Loading unitBTI THE NEW BELT CONVEYOR FOR THE GRAIN INDUSTRY TAKE A CLOSER LOOK AT BTISTANDARD EQUIPMENT: counterweight not included), adjustable tail pulley,plough scraper and cover.• Antistatic conveyor belt.• Adjustable carrying idler set and return idler set.• Adjustable tracking idler set for the return section, included at machine length ≥ 20 metres and then one more for every additional 20 metres.• Permanently lubricated carrying idlers/return idlers/tracking idlers.• Support feet. ACCESSORIES:• Steel cable for driving discharge tripper.• Limit switch (for extra stop).• Enclosure for end outlet with outlet hopper.• Diagonal brace (extra for outdoor assembly) one for every 3 metres of conveyor.• Oil resistant conveyor belt.• Cable operated emergency stop.• Cove r.BTI BELT CONVEYOR BTI 400BTI 500BTI 65040 t/h60 t/h80 t/h100 t/h120 t/h150 t/h Capacity for 750 kg/m³t/h43– 4765– 6785–94108–112128–141153–169 Capacity m³/h57– 6387– 89113–125144–149171–188204–225 Speed rpm126–149194–209161–178194–209126–149161–178 Belt speed m/s 1.56–1.72 2.36–2.44 1.86–2.06 2.36–2.44 1.56–1.72 1.86–2.06 Belt width mm400500650Self supporting length m6Belt type EP250/2 3+1,5 YConnection loading unit/outlet hopper/two-way valve discharge trippermm 180 250 300ATEX class (standard equipment)II 0D/0D **Higher class as option at extra cost.THE LEADING COMPANYSKANDIA ELEVATOR, S-534 94 VARA, SWEDEN I Phone +46 512 797 000 I******************************I 。
Peavey Impulse 1015 技术规格书说明书
Specifications - Peavey® Impulse® 1015Frequency Response: 68 Hz to 18 kHz, 1 meter on axis, swept sine in anechoic environmentUsable Low Frequency limit (-10 dB point anechoic): 59 HzNominal sensitivity (1W @1M, swept sine input in anechoic environment): 97 dB (average)Maximum Sound Pressure Level (1 meter):124 dB continuous130 dB SPL peak with musicRadiation Angle measured at -6 dB point of polar response:Nominal: 110 degrees horizontal X 80 degrees vertical(Axis of the vertical main polar lobe is angled down 10 degrees, resulting in the angular pattern with respect to straight ahead being +30, -50 degrees)Transducer Complement:Low Frequency Section:1 X 15” woofer, ventedBlack Widow® 1508-8 BWX WR SS SF (03617980)High Frequency Section:1 X 1.0” exit, 50 mm voice coilRX™22N Neodymium compression driver on asymmetrical Quadratic Throat CD HornBox Tuning Frequency: 45 HzElectro-acoustic crossover frequency: 1.9 kHzCrossover type:Internal passive two-way crossover with driver EQ, and driver level matching incorporated.Crossover Slopes:12 dB/octave (2nd order) each driver, both with staggered poles and driver EQ.Impedance (Z) in ohms (Ω):Nominal: 8.0 ΩMinimum: 5.3 ΩInput Connections:Two NL-4 twist-lock jacks in parallel with a 4 position screw terminal barrier strip.Enclosure Materials & Finish:Black polypropylene plastic with textured surface, black powder-coated perforated full-coverage grille.Mounting provisions:Four rubber feet provide vibration free floor or stage use, and a molded-in stand mounting cup is on the bottom for use with 1 3/8” stand poles. Unit has two four insert mounting groups (8 inserts total) of M6 metric inserts, for use with the Peavey VM 70 mounting bracket, one on the left side, and one on top.Overall Dimensions ( H x W x D )28.3”H x 16.75”W x 15.00”D719 mm x 426 mm x 381 mmNet Weight: 48 lbs. (21.8 kg)Features• 2-way full range sound reinforcement system• Black Widow® 15” 1508-8 BWX WR SS SF long-throw woofer• RX™22N Neodymium compression driver• Power Handling: 2000 watts peak, 1000 watts Program• HF Driver protected by Sound Guard™ III• Patented Quadratic Throat Waveguide™ technology, 110 by 80 degree coverage• Rugged plastic injection-molded trapezoidal enclosure• Cabinet has dual rear corner angled sides for floor monitor use.• Full-coverage perforated steel grille, with powder coat finish• Pole mount molded-in for 1 3/8” diameter poles• M6 metric fly points for VM-70, top and left side of cabinet• Weather-resistant for sheltered outdoor use.• Overall system weatherization rating of IP44DO NOT remove the protective metal grilles.W ARNING! The Impulse®1015 is very efficient and powerful! This sound system can permanently damage hear-ing! Use extreme care setting the overall maximum loudness!The apparent sound level of the Impulse®1015 can be deceiving due to its clear, clean sound output. The lack of distortion or obvious distress can make the sound level seem much lower than it actually is. This system is capa-ble of SPL in excess of 130 dB at 1 M from the speaker!DescriptionThe Impulse®1015 is a weather-resistant two-way sound reinforcement system based on a 15” Black Widow® woofer and a RX™22N titanium diaphragm dynamic compression driver mounted on a 110 by 80 degree cover-age Quadratic Throat Waveguide™. It’s contemporary appearance coupled with exceptional performance offer an highly desirable combination.The light yet durable injection-molded plastic enclosure with molded-in stand mount cup eases portable use for live music or PA sound. The trapezoidal cabinet has three handles for ease of portability, and two extra angled sections on either side to allow use as a floor monitor. Two mounting point locations are available, one on top and one on the side for the Peavey® VM™ 70 mounting bracket. A full length black powder coated perforated steel grille with cloth backing provides system protection and a professional appearance. System is weather-resis-tant for additional flexibility in sheltered outdoor use.The two-way system consists of the following driver components: a 15” Black Widow® BWX series woofer with a long throw voice coil. The woofer is capable of over 500 Watts of continuous power handling (AES Std 2-1984). The high frequencies are handled by the new 2” RX™22N Neodymium magnet with titanium diaphragm com-pression driver. This outstanding driver is coupled to a Quadratic Throat Constant Directivity Waveguide (U.S. Patent #6,059,069) to provide smooth, even response, low distortion and good high frequency dispersion. This horn has an asymmetrical vertical polar response, aiming the main energy lobe down 10 degrees so it reaches the audience instead of going over their heads. This reduces ceiling reflections and ensures greater clarity and gain before feedback.Full-range input connection to the system is made via two NL-4 four-pin twist-lock jacks and one four screw terminal barrier strip all in parallel. The internal passive crossover features the Peavey-exclusive Sound Guard™ protection circuit for the tweeter and an advanced topology crossover with high-performance components to provide high power handling and reliability. Sound Guard™ provides long- and medium-term driver overload protection without impairing musical transients or dynamics on the tweeter.The crossover provides driver roll-off and protection as well as driver EQ for the woofer and horn for a clean, clear and smooth response. High-quality, reliable crossover components include polypropylene capacitors and high-current inductors. The optimal integration of the crossover with the selected drivers results in a smooth frequency response from 67 Hz to 18 kHz.Despite its compact dimensions, this system can produce very high sound levels and handle 1000 watts program power, resulting in high articulation and long-term reliability.Flying or Mounting the Impulse™ EnclosureIMPORTANT SAFETY INFORMATION FOR THE MOUNTING AND FLYING OF THE PEAVEY Im-pulse®1015CAUTION: Before attempting to suspend this speaker, consult a certified structural engineer. Speaker can fall from improper suspension, resulting in serious injury and property damage. Do not suspend or mount any other product or device from this enclosure! Maximum enclosure angle 30 degrees. Use only the correct mating hardware. All associated rigging is the responsibility of others.ALW AYS USE A SUITABLE SAFETY CHAIN or wire rope, attached to an unused group of fly points or to the cabinet as directed by a certified structural engineer, and firmly attached to a suitable structural member as indi-cated by a certified structural engineer.The recommended range of torque for the mounting bolts is 3.5 to 4.0 foot-lbs. (4.75 to 5.42 N-m). DO NOT OVERTIGHTEN ! If an insert spins free, it has been damaged, and the cabinet can not be safely flown from that set of inserts!Never transport the cabinet while mounted on an array bracket or other mounting bracket, this may unduly stress the mounting inserts.The use of threadlocker (blue type/medium strength) on the mounting bolts is recommended, as are the appro-priate lockwashers, to insure that the mounting hardware will not vibrate loose over time.CAUTION: FOR CONTINUED SAFETY INSPECT RIGGING ANNUALLY.GROUPING OF INSERT SETSGroup AA set of four M6 inserts on the top, designed to be used with the Peavey VM 70 mounting bracket. The inserts can also be used with the proper forged machinery eyebolts to hang the cabinet. See Eyebolt Use and Eyebolt Specifications below.Group BA set of four M6 inserts on the left side, designed to be used with the Peavey VM 70 mounting bracket.Both groups should always use all four inserts of a given group as a set; NEVER use just one insert to fly a cabi-net! The pair of insert groupings are meant to have all four inserts used at once within a group.Both groups should use an M6 x 1.0 mm per thread metric bolt, grade 8.8 or better, that penetrate the cabinet past the cabinet surface at least 1 / 2” (approx. 12 mm).A maximum length of cabinet penetration is recommended not to exceed approx. 1.00” (approx. 25 mm) to avoid fouling the tip of the bolt on the sound absorbing material inside the cabinet.When using a Peavey® VM 70 mounting bracket and lock washer, the length of the bolt should be a minimum of 0.75” (approx. 19 mm). A maximum length of cabinet penetration is recommended not to exceed approx. 1.25” (approx. 32 mm) to avoid fouling the tip of the bolt on the sound absorbing material inside the cabinet.Both groups are designed to be used with the Peavey® VM 70 mounting bracket (03011050 black, 03011040 white). The Impulse®1015 can also be used with the Peavey® Wall-Mount Speaker Stand (00922940 black), which will fit into the built-in stand mount cup on the bottom of the cabinet.EYEBOLT USEAGEThe group A insert group can be used with the proper eyebolts to fly the cabinet. Two eyebolts can be used to hang the cabinet using the front two inserts of Group A, and the rear two inserts can be used to pull up and angle the cabinet downward for small angles. For aiming the cabinet downward greater than a small angle, the use of the thumbscrew insert on the rear bottom of the cabinet, in the pole mount recess, can allow an M8 x 1.25 mm eyebolt to pull the cabinet back. Maximum angle is 45 degrees.EYEBOLT SPECIFICATIONSEyebolts used in the Group A should be M6 metric thread. Eyebolts and bracket bolts must conform to certain minimum strength criteria for safety reasons. Unspecified eyebolts found at local hardware stores are not strong enough to maintain safety for overhead flying or rigging. Use only forged steel shoulder machinery eyebolts de-signed for rigging use, which adhere to the stated standards as outlined below.Forged shoulder machinery eyebolts used for Group A inserts should be an M6 size, 1.0 mm per thread, and must conform to DIN 580 or ASTM A489 standards, for Germany, DGUV 17 (formerly BGV-C1) is the relevant standard. Minimum shank length should be 12 mm. Maximum recommended shank length is 26 mm (to avoid fouling the sound absorbent liner inside). The eyebolts should be rated for a minimum of 150 lbs straight pull working load.For the pull-back eyebolt used on the thumbscrew position down at the bottom rear of the cabinet, this should be an M8 x 1.25 mm size eyebolt conforming to the same standards as the main eyebolts above.If there are any questions regarding the proper hardware or practices for safe flying or rigging of the Peavey Impulse® 1015, contact a certified structural engineer, or consult with those local rigging companies who have trained and certified personnel.2.769.59Architectural & Engineering SpecificationsImpulse® 1015The loudspeaker shall consist of a 15 inch nominal low frequency transducer and a high frequency compression driver on a quadratic throat waveguide horn with a 110 deg. x 80 deg. nominal coverage pattern. The frame of the low frequency transducer shall be made of cast aluminum, and the magnetic assembly shall use a ferrite magnet and the voice coil shall be 4 inches in nominal diameter and made of edgewound aluminum ribbon wire. The high frequency section shall be driven by a compression driver capable of 60 watts power input above 1 kHz. The compression driver voice coil shall be no less than 2 inches in nominal diameter, utilize a titanium diaphragm and a Neodymium magnet structure. Input to the loudspeaker system shall consist of two NL-4 four-pin twist-lock connectors, both in parallel with a 4 position screw terminal barrier strip with contact guard cover. The speaker system shall have an IP rating of IP44, when properly installed, according to the instructions.The loudspeaker system shall have an operating bandwidth of 68 Hz to 18 kHz. The nominal output level shall be 97 dB when measured at a distance of 1 meter with an input of 1 watt. The nominal impedance shall be 8 ohms. The maximum continuous power handling shall be 500 watts, with maximum program power of 1,000 watts, peak power input of at least 2,000 watts and a minimum amplifier headroom of 3 dB. The nominal radiation geometry shall be 110 degrees symmetrical about the center axis in the horizontal plane, and +30, -50 degrees about the center axis in the vertical plane.Fly point inserts shall be provided, 8 per cabinet, at the following locations: 4 top, and 4 on the left side. The outside dimensions shall be 28.30 inches high by 16.75 inches wide by 15.00 inches deep. The weight shall be 48 lbs. The loudspeaker system shall be a Peavey® model Impulse®1015.Specifications subject to change without notice.Logo referenced in Directive 2002/96/EC Annex IV (OJ(L)37/38,13.02.03 and defined in EN 50419: 2005The bar is the symbol for marking of new waste and is applied only to equipment manufactured after13 August 2005Warranty registration and information for U.S. customers available online at/warranty or use the QR tag belowFeatures and speci cations subject to change without notice.Peavey Electronics Corporation 5022 Hartley Peavey Drive Meridian, MS 39305 (601) 483-5365 FAX (601) 486-1278。
FTLF1523P1BTL, 规格书,Datasheet 资料
FTLF1523P1xTL
x W B Wide Extraction Bail Narrow Extraction Bail
Finisar Corporation December 2, 2005 Rev.A
Page 1
芯天下--/
FTLF1523P1xTL Pluggable SFP Product Specification - December 2005
Finisar
II.
Absolute Maximum Ratings
Symbol Vcc TS TOP RH Min -0.5 -40 -40 0 Typ Max 4.5 100 85 85 Unit V °C °C % Ref.
Parameter Maximum Supply Voltage Storage Temperature Case Operating Temperature Relative Humidity
1
1
1
Notes: 1. Circuit ground is internally isolated from chassis ground. 2. Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V. 3. Should be pulled up with 4.7k - 10kohms on host board to a voltage between 2.0V and 3.5V. MOD_DEF(0) pulls line low to indicate module is plugged in. 4. Finisar FTLF1523P1xTL transceivers operate without active control. 5. LOS is open collector output. Should be pulled up with 4.7k - 10kohms on host board to a voltage between 2.0V and 3.5V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
BT137-600D,127;中文规格书,Datasheet资料
1.Product profile1.1General descriptionPlanar passivated very sensitive gate four quadrant triac in a SOT78 plastic package intended for use in general purpose bidirectional switching and phase control applications, where high sensitivity is required in all four quadrants. This very sensitive gate "series D" triac is intended to be interfaced directly to microcontrollers, logic integrated circuits and other low power gate trigger circuits.1.2Features and benefitsDirect triggering from low power drivers and logic ICs High blocking voltage capability Low holding current for low current loads and lowest EMI at commutationPlanar passivated for voltage ruggedness and reliability Triggering in all four quadrants Very sensitive gate1.3ApplicationsGeneral purpose motor controlGeneral purpose switching1.4Quick reference dataBT137-600D4Q TriacRev. 3 — 24 March 2011Product data sheetTable 1.Quick reference data Symbol Parameter ConditionsMin Typ Max Unit V DRM repetitive peak off-state voltage --600V I TSMnon-repetitive peak on-state current full sine wave; T j(init)=25°C; t p =20ms; see Figure 4;see Figure 5--65AI T(RMS)RMS on-state currentfull sine wave; T mb ≤102°C; see Figure 1; see Figure 2;see Figure 3--8A2.Pinning information3.Ordering informationStatic characteristicsI GTgate trigger currentV D =12V;I T =0.1A; T2+ G+; T j =25°C; see Figure 7- 2.55mA V D =12V;I T =0.1A; T2+ G-; T j =25°C; see Figure 7- 3.55mA V D =12V;I T =0.1A; T2- G-; T j =25°C; see Figure 7- 3.55mA V D =12V;I T =0.1A; T2- G+; T j =25°C; see Figure 7- 6.510mA I Hholding currentV D =12V;T j =25°C;see Figure 9- 1.510mATable 1.Quick reference data …continued Symbol Parameter ConditionsMin Typ Max Unit Table 2.Pinning information Pin Symbol Description Simplified outline Graphic symbol1T1main terminal 1SOT78 (TO-220AB)2T2main terminal 23G gatembT2mounting base;main terminal 212mb3sym051T1GT2Table 3.Ordering informationType numberPackage NameDescriptionVersion BT137-600DTO-220ABplastic single-ended package; heatsink mounted; 1 mounting hole; 3-lead TO-220ABSOT784.Limiting valuesTable 4.Limiting valuesIn accordance with the Absolute Maximum Rating System (IEC 60134).Symbol ParameterConditionsMin Max Unit V DRM repetitive peak off-state voltage -600V I T(RMS)RMS on-state current full sine wave; T mb ≤102°C;see Figure 1; see Figure 2; see Figure 3-8A I TSMnon-repetitive peak on-state currentfull sine wave; T j(init)=25°C;t p =20ms; see Figure 4; see Figure 5-65A full sine wave; T j(init)=25°C; t p =16.7ms-71A I 2t I 2t for fusing t p =10ms; sine-wave pulse-21A 2s dI T /dtrate of rise of on-state currentI T =12A; I G =0.2A; dI G /dt =0.2A/µs; T2+ G+-50A/µs I T =12A; I G =0.2A; dI G /dt =0.2A/µs; T2+ G--50A/µs I T =12A; I G =0.2A; dI G /dt =0.2A/µs; T2- G--50A/µs I T =12A; I G =0.2A; dI G /dt =0.2A/µs; T2- G+-10A/µs I GM peak gate current -2A V GM peak gate voltage -5V P GM peak gate power -5W P G(AV)average gate power over any 20 ms period-0.5W T stg storage temperature -40150°C T jjunction temperature-125°C5.Thermal characteristicsTable 5.Thermal characteristicsSymbol ParameterConditionsMin Typ Max Unit R th(j-mb)thermal resistance from junction to mounting base half cycle; see Figure 6-- 2.4K/W full cycle; see Figure 6--2K/W R th(j-a)thermal resistance from junction to ambientin free air-60-K/W6.CharacteristicsTable 6.CharacteristicsSymbol Parameter Conditions Min Typ Max Unit Static characteristicsI GT gate trigger current V D=12V;I T=0.1A; T2+ G+;T j=25°C;see Figure 7- 2.55mAV D=12V;I T=0.1A; T2+ G-;T j=25°C;see Figure 7- 3.55mAV D=12V;I T=0.1A; T2- G-;T j=25°C;see Figure 7- 3.55mAV D=12V;I T=0.1A; T2- G+;T j=25°C;see Figure 7- 6.510mAI L latching current V D=12V;I G=0.1A; T2+ G+;T j=25°C;see Figure 8- 1.615mAV D=12V;I G=0.1A; T2+ G-;T j=25°C;see Figure 8-8.520mAV D=12V;I G=0.1A; T2- G-;T j=25°C;see Figure 8- 1.215mAV D=12V;I G=0.1A; T2- G+;T j=25°C;see Figure 8- 2.520mA I H holding current V D=12V;T j=25°C;see Figure 9- 1.510mA V T on-state voltage I T=10A; T j=25°C; see Figure 10- 1.3 1.65VV GT gate trigger voltage V D=12V;I T=0.1A; T j=25°C;see Figure 11-0.7 1.5VV D=400V; I T=0.1A; T j=125°C;see Figure 110.250.4-VI D off-state current V D=600V; T j=125°C-0.10.5mA Dynamic characteristicsdV D/dt rate of rise of off-statevoltage V DM=402V;T j=125°C;R GT1=1kΩ;exponential waveform; gate open circuit-5-V/µst gt gate-controlled turn-ontime I TM=12A; V D=600V; I G=0.1mA;dI G/dt=5A/µs-2-µs7.Package outlineFig 12.Package outline SOT78 (TO-220AB)8.Revision historyTable 7.Revision historyDocument ID Release date Data sheet status Change notice SupersedesBT137-600D v.320110324Product data sheet-BT137-600D_2 Modifications:•Various changes to content.•The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors.•Legal texts have been adapted to the new company name where appropriate.BT137-600D_220010601Product specification-BT137_SERIES_D_1分销商库存信息: NXPBT137-600D,127。
BTLY柔性防火电缆
隔离型柔性矿物绝缘电缆 (BTLY)在传统BTTZ矿物绝缘电缆的基础上研发了新型BTLY、BTLYQ、BTLV、BTLVQ铝护套连续挤包矿物绝缘电缆1、产品结构：①、导体为圆形铜绞线（相对BTTZ的实心铜杆较软）②、绝缘层为纯金云母带（不再与挤包绝缘料复合组成，从而排除碳粒的产生，提高了耐电稳定性）③、金属套为连续挤出的铝金属管（大大简化了BTTZ的铜管拉拔工艺），④、隔离套（交联绝缘）⑤、耐火层（在其外覆以火焰下不熔不燃可膨胀阻火的无机物—Mg(OH)或AL(OH)），⑥、外护套塑料（聚烯烃或聚氯乙烯），2、它的特征：①耐火标准可通过BS6387三项考核：即950℃3h火焰下不击穿，650℃30min后承受15min 的水喷淋（直接浸水亦可），950℃火焰下承受15min的敲击振动而不破坏，从而在耐火性能上完全达到BTT的考核标准。
②该产品1.5~6平方规格可生产1~37芯，10~240平方规格可生产1~5芯，300~630平方可生产单芯, 长度可根据用户需要，整根无接头整盘交货。
③敷设时可不必另行穿管，具有BTT同等的防水、防冲击功能。
④具有良好的防鼠、防蚁、防辐射功能,可保证电缆具有稳定性、寿命长和耐久性。
⑤工作温度低、线损小、抗过载能力强，使用寿命长、安全性高，在有环保要求的项目中尤其适合应用。
⑥防爆（电缆中高度压实的绝缘材料及专门密封套安装的电缆终端可以阻止蒸汽、气体和火焰进入与电缆连接的电气设备，因而实用于有爆炸危险的地方和各种防爆设备、器材的连线。
）⑦耐腐蚀（BTT（L）系列矿物绝缘电缆的金属套具有高耐腐蚀性，对于大多数的装置来说，它不需要采取附加的防护措施；即使在电缆的金属护套易遭受化学品腐蚀或工业污染严重的地方，因为电缆最外层有塑料外护套的保护，它仍然安全。
）⑧机械性强度高（BTT（L）系列矿物绝缘电缆坚固耐用，在电缆直径变形三分之一的情况下仍可正常工作，即使经受剧烈的机械破坏，也不会损害其电性能。
博布里克洗手间设备产品技术数据表说明书
The illustrations and descriptions herein are applicable to production as of the date of this T echnical Data Sheet. Revised 9/07 Printed in U.S.A. The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2007 by Bobrick Washroom Equipment, Inc.The illustrations and descriptions herein are applicable to production as of the date of this T echnical Data Sheet.1040 Revised 9/07 Printed in U.S.A.The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions.© 2007 by Bobrick Washroom Equipment, Inc.maTerialS:Stiles — 1'' (25mm) finished thickness: 3-ply, 45-lb (20.4-kg) density, resin-impregnated particle board is bonded to each side of 11-gauge (3.2mm) sheet steel that serves as reinforcing core; surfaces and edges are .050'' (1.3mm) thick, high-pressure plastic laminate with colored face sheets and matte finish. Leveling device: 3/8'' x 7/8'' (10 x 22mm) steel bar is welded to sheet-steel core of stile, forming a single structural unit; furnished with 3/8'' (10mm) diameter threaded rods, hex nuts, lock washers, flat washers, expansion shields, and shoe retainers. Shoe: 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish; 4'' (102mm) high.Panels and doors — 1'' (25mm) finished thickness: 3-ply, 45-lb (20.4-kg) density, resin-impregnated particle board; surfaces and edges are .050'' (1.3mm) thick, high-pressure plastic laminate with colored face sheets and matte finish.Posts (for 1043 Series screens only) — 1-1/4'' (32mm) square tubing; 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin finish. Floor and ceiling connections are constructed of 18-8 S, type-304, heavy-gauge stainless steel. Furnished in 10-ft (305-cm) lengths; to be cut in field to job specifications.Headrail (for 1042 Series only) — Extruded anodized aluminum with satin finish. Enclosed construction with sloping top. Face has raised grip-resistant edge.Designer's Notes: Headrails with integral curtain tracks and hooks are available for compartments without doors. Vinyl curtains are available as an optional ac-cessory. Benches are available as an optional accessory for dressing compartments: 1'' (25mm) thick laminated plastic, 10'' (25cm) deep, 18'' or 24'' (46 or 61cm) wide; furnished with two stainless steel support brackets.Wall Posts — 1" x 1-1/2" (25 x 38mm) tubing. 18-8 S, type-304, 16-gauge (1.6mm) stainless steel with satin finish. 58" (147cm) high, pre-drilled for door hard-ware.Commercial Hardware (standard) — Hinges, door latches, door keepers, clothes hooks, and mounting brackets are constructed of 18-8 S, type-304, heavy-gauge stainless steel with satin finish. Threaded inserts are factory installed for securing hinges on inswing doors and furnished for outswing doors. T-nuts are factory installed for securing door latch. Theft-resistant, stainless steel pin-head, torx screws are furnished for door hardware and all mounting brackets. Black rubber bumper on the door latch serves as door bumper for inswing door. Balanced hinge is adjustable to hold door of unoccupied toilet compartment partially open or fully closed. Toilet compartment door is locked from inside by sliding door latch into keeper. A locked compartment may be opened from outside by lifting door to disengage latch from keeper. Track of door latch prevents inswing door from swinging out beyond stile; on outswing door, the door keeper prevents it from swinging in beyond stile.Continuous Hardware (.65 option) — Hinges, door latches, door keepers, clothes hook, U-channels, door stop plates and angle brackets are constructed of 18-8 S, type-304, heavy-gauge stainless steel with satin finish; one-piece, full-height hinge is 16 gauge (1.6mm); one-piece door keepers shall be is 11 gauge (3.2mm); one-piece full-height U-channels and angle brackets are 18 gauge (1.2mm). U-channels secure panels to stiles, and angle brackets secure panels and stiles to walls. Door latch slides on a shock-resistant nylon track. A locked compartment may be opened from outside by lifting door to disengage latch from keeper. Two doorstops prevent door from being kicked out by vandals. Theft-resistant, stainless steel pin-head, torx screws are furnished for door hardware, U-channels, and angle brackets. Doors are equipped with a self-closing hinge. Threaded inserts are factory installed to secure door hinge, latch, and doorstops. To specify continuous hardware, add suffix .65 to series number. Example: specify 1042.65 for overhead-braced partitions furnished with continuous hardware, including factory-installed threaded inserts for door hardware attachment.inSTallaTion:Bobrick installation instructions are packed with each shipment and are available also in advance on request.notes:1. Where water from showers or hose-down cleaning comes in contact with partitions, Bobrick 1080 Series water-resistant, solid phenolic partitions are recom-mended.2. Ceiling-hung partitions require structural members (not furnished by Bobrick) in ceiling. For suggested types of ceiling support systems, see Bobrick Advisory Bulletin TB-32.3. Wall backing is required to secure the mounting brackets of panels, stiles, and wall posts. For suggested wall backing, see Bobrick Advisory Bulletin TB-46.4. Floor-anchored stiles are furnished with expansion anchors and threaded rods. The expansion anchors require minimum 2" (50mm) penetration into minimum 3" (75mm) thick structural concrete.5. Bobrick stainless steel partition-mounted washroom accessories are available for mounting in panels between two compartments. See current Bobrick Catalog for description of accessories. Cutouts in panels can be pre-cut for Bobrick models at factory if location and size of all cutouts and Bobrick model numbers are furnished at time of order.guaranTee: Bobrick toilet partitions are guaranteed to be free from defects in material and workmanship for a period of one year from date of purchase. Any products returned to Bobrick under this guarantee will be repaired or replaced at no charge. SpeciFicaTion:Laminated plastic ____________________ (insert one: toilet partitions, dressing compartments, urinal screens, entrance screens) shall be _______________ (insert one: floor-anchored, overhead-braced, ceiling-hung, wall-hung, post-to-ceiling). Stiles, panels and doors shall have a finished thickness of 1'' (25mm). Core of panels and doors shall be 3-ply, 45-lb (20.4-kg) density, resin-impregnated particle board. Stiles shall have 3-ply, 45-lb (20.4-kg) density, resin-impregnated particle board bonded to each side of 11-gauge (3.2mm) sheet steel that serves as reinforcing core. Stiles shall have leveling device that is welded to the sheet-steel core and concealed by a one-piece, type-304, satin-finish stainless steel shoe that is 4'' (102mm) high. Surfaces and edges shall be .050'' (1.3mm) thick, high-pressure plastic laminate with colored face sheets and matte finish; bonding shall be done using adhesives especially formulated to prevent delamination from moisture and heat normally existing in public washrooms. Stiles, panels and doors shall be __________ (insert color name and number from current Bobrick Catalog). Headrails for overhead-braced compartments shall be anodized aluminum with satin finish. c All door hardware and mounting brackets shall be type-304 stainless steel with satin finish. No door hardware or mounting brackets shall be exposed on exterior of compartments, except on outswing doors. Threaded inserts shall be factory installed for securing hinges on inswing doors and furnished for outswing doors. T-nuts shall be factory installed for securing door latches. Theft-resistant, stainless steel pin-head, torx screws shall be furnished for door hardware and all mounting brackets. A coat hook shall be furnished for each door. Hinges shall be adjustable to hold doors of unoccupied compartments partially open or fully closed, and shall allow a locked compartment to be opened from outside by lifting door to disengage latch from keeper.c To specify continuous hardware, replace end of specifications paragraph with: .65 option All door hardware, U-channels, and angle brackets shall be type-304 stainless steel with satin finish: one-piece, full-height hinges shall be 16 gauge (1.6mm); one-piece door keepers shall be 11 gauge (3.2mm); one-piece, full- height U-channels and single brackets shall be 18 gauge (1.2mm). U-channels shall be furnished to secure panels to stiles, and angle brackets furnished to secure panels and stiles to walls. Two doorstops shall be furnished for each door to prevent it from being kicked out by vandals. Theft-resistant, stainless steel pin-head, torx screws shall be furnished for door hardware, U-channels, and angle brackets. Hinges shall allow locked compartment to be opened in emergency from outside by lifting door to disengage latch from keeper. Doors shall be equipped with a self-closing hinge. Threaded inserts shall be factory installed to secure all door hinges, latches, and doorstops. Manufacturer's service and parts manual shall be provided to the building owner/manager upon request.______________________ (insert one: toilet Partitions, dressing Compartments, Urinal Screens, entrance Screens) shall be _______________ Series (insert series number) of Bobrick Washroom equipment, inc., Clifton Park, new York; Jackson, tennessee; Los Angeles, California; Bobrick Washroom equipment Company, Scarborough, ontario; Bobrick Washroom equipment Pty. Ltd., Australia; and Bobrick Washroom equipment Limited, United Kingdom.。
PC817X NIP1B ED 规格书
REFERENCE1. ApplicationThis specification applies to the outline and characteristics of photocoupler Model No. PC817series(Lead-Free Type).2. Outline Refer to the attached sheet, page 4.3. Ratings and characteristics Refer to the attached sheet, page 5, 6.4. Reliability Refer to the attached sheet, page 7.5. Outgoing inspection Refer to the attached sheet, page 8.6. Supplement6.1 Isolation voltage shall be measured in the following method.(1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side.(2) The dielectric withstanding tester with zero-cross circuit shall be used.(3) The wave form of applied voltage shall be a sine wave.(It is recommended that the isolation voltage be measured in insulation oil.)6.2 Package specifications Refer to the attached sheet, page 9, 10.6.3 Business dealing name ("○" mark indicates business dealing name of ordered product)Ordered product Business dealing name Rank mark Ic (mA)PC817XNNIP1B with or without 2.5 to 30.0PC817X1NIP1B A 4.0 to 8.0PC817X2NIP1B B 6.5 to 13.0PC817X3NIP1B C 10.0 to 20.0PC817X4NIP1B D 15.0 to 30.0PC817X5NIP1B A or B 4.0 to 13.0PC817X6NIP1B B or C 6.5 to 20.0PC817X7NIP1B C or D 10.0 to 30.0PC817X8NIP1B A, B or C 4.0 to 20.0PC817X9NIP1B B, C or D 6.5 to 30.0PC817X0NIP1B A, B, C or D 4.0 to 30.06.4 This Model is approved by UL. (Under preparation).Approved Model No. : PC817UL file No. : E643806.5 This Model is approved by CSA.(Under preparation).Approved Model No. : PC817CSA approved mark " " shall be indicated on minimum unit package.6.6 This product is not designed against irradiation.This product is assembled with electrical input and output.This product incorporates non-coherent light emitting diode. Test conditionsI F=5mAV CE=5VTa=25℃6.7 ODS materialsThis product shall not contain the following materials.Also, the following materials shall not be used in the production process for this product.Materials for ODS : CFC S, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methyl chloroform)6.8 Specified brominated flame retardantsSpecified brominated flame retardants (PBB and PBDE) are not used in this device at all6.9Compliance with each regulation(1) The RoHS directive(2011/65/EU)This product complies with the RoHS directive(2011/65/EU) .Object substances: mercury, lead, cadmium, hexavalent chromium, polybrominated biphenyls（PBB）and polybrominated diphenyl ethers（PBDE）(2) Content of six substances specified in Management Methods for Control of Pollution Caused by ElectronicInformation Products Regulation (Chinese : 电子信息产品污染控制管理办法).Marking Styles for the Names and Contents of the Hazardous SubstancesCategoryHazardous SubstancesLead(Pb)Mercury(Hg)Cadmium(Cd)Hexavalentchromium(Cr6+)Polybrominatedbiphenyls(PBB)Polybrominateddiphenyl ethers(PBDE)Photocoupler ○○○○○○○：Indicates that said hazardous substance contained in all of the homogeneous materials for this part isbelow the limit requirement of GB/T 265727. NotesPrecautions for photocouplers ：Attachment-12. Outline3. Ratings and characteristics3.1 Absolute maximum ratings Ta=25℃Parameter Symbol Rating UnitInput *1 Forward current I F50 mA *2 Peak forward current I FM 1 A Reverse voltage V R 6 V *1 Power dissipation P 70 mWOutputCollector-emitter voltage V CEO80 V Emitter-collector voltage V ECO 6 V Collector current I c50 mA *1 Collector power dissipation P c150 mW *1 Total power dissipation P tot200 mW Operating temperature T opr-30 to +100 ℃Storage temperature T stg-55 to +125 ℃*3 Isolation voltage V iso(rms) 5 kV *4 Soldering temperature T sol270 ℃3.2 Electro-optical characteristics Ta=25℃Parameter Symbol Condition MIN. TYP. MAX. UnitInput Forward voltage V F I F=20mA - 1.2 1.4 V Peak forward voltage V FM I FM=0.5A - - 3.0 V Reverse current I R V R=4V - - 10 μA Terminal capacitance C t V=0, f=1kHz - 30 250 pFOutput Dark current I CEO V CE=50V, I F=0 - - 100 nA Collector-emitter breakdown voltage BV CEO I c=0.1mA I F=0 80 - - V Emitter-collector breakdown voltage BV ECO I E=10μA, I F=0 6 - - VTransfer charac- teristics Collector current I c I F=5mA, V CE=5V 2.5 - 30 mA Collector-emitter saturation voltage V CE(sat)I F=20mA I c=1mA - 0.1 0.2 V Isolation resistance R ISO DC500V 40 to 60%RH 5×10101011- ΩFloating capacitance C f V=0, f=1MHz - 0.6 1.0 pF Cut-off frequency f cV CE=5V, I c=2mAR L=100Ω, -3dB- 80 - kHzRise time tr VCE=2V I c=2mAR L=100Ω- 4 18 μs Fall time t f- 3 18 μs*1 The derating factors of absolute maximum ratings due to ambient temperature are shown in Fig. 1to 4. *2 Pulse width≦100μs, Duty ratio : 0.001 (Refer to Fig. 5)*3 AC for 1 min, 40 to 60%RH*4 For 10s0 0 25 75 10020 40 60 80100 -30 50 70D i o d e p o w e r d i s s i p a t i o n P (m W )(Fig. 2) Diode power dissipationvs. ambient temperatureAmbient temperature Ta (℃)1255040 30 20 10 00 25 75100 -30 50 (Fig. 1) Forward currentvs. ambient temperatureF o r w a r d c u r r e n t I F (m A )Ambient temperature Ta (℃)125-2555-2555200150 100 50 0 0 25 50 75 100 -30 Ambient temperature Ta (℃) C o l l e c t o r p o w e r d i s s i p a t i o n P c (m W )(Fig. 3) Collector power dissipationvs. ambient temperature125 250(Fig. 4) Total power dissipationvs. ambient temperatureT o t a l p o w e r d i s s i p a t i o n P t o t (m W )Ambient temperature Ta (℃)0 25 50 75 100 50 100 150 200 -30 125250 -25-25P e a k f o r w a r d c u r r e n t I F M (m A )1020 50 100 200 500 1000 2000 10 -31010 10-2-1Duty ratio(Fig.5) Peak forward current vs. duty ratioTa = 25℃Pulse width ≦ 100μs4. ReliabilityThe reliability of products shall satisfy items listed below. Confidence level : 90% L TPD : 10 or 20Test Items Condition *1 Failure JudgmentCriteriaSamples (n)Defective (C)Solderability 245±3℃, 5s *2 n=11, C=0Soldering heat(Flow soldering) 270℃, 10 sV F ＞U×1.2I R ＞U×2I CEO ＞U×2I C ＜L×0.7V CE(sat) ＞U×1.2U: Upper specification limitL: Lower specification limit n=11, C=0(Soldering by hand) 400℃, 3 sTerminal strength(Tension)W eight: 5N 5 s/each terminal n=11, C=0Terminal strengthBending) *3W eight: 2.5N 2 times/each terminal n=11, C=0Mechanical shock 15km/s2, 0.5ms3 times/±X, ±Y, ±Z directionn=11, C=0V ariable frequency vibration 100 to 2000 to 100Hz/4 min 200m/s24 times/X, Y, Z directionn=11, C=0Temperature cycling 1 cycle –55℃to +125℃(30 min) (30 min)20 cycles testn=22, C=0High temp. and highHumidity storage+85℃, 85%RH, 1000h n=22, C=0 High temp. storage +125℃, 1000h n=22, C=0 Low temp. storage -55℃, 1000h n=22, C=0Operation life I F=50mA, P tot=200mWTa=25℃, 1000hn=22, C=0*1 Test method, conforms to EIAJ ED 4701.*2 The product whose not-soldered area is more than 5% for all of the dipped area and/or whose pinholes or voids are concentrated on one place shall be judged defect. *3 Terminal bending direction is shown below.θθ5. Outgoing inspection5.1 Inspection items(1) Electrical characteristicsV F, I R, I CEO, V CE(sat), I c, R ISO, V iso(2) Appearance5.2 Sampling method and Inspection level5°maxHI J +0.1-0Carrier tape structure and Dimensions 6.2 Package specifications 6.2.1 Taping conditions(1) Tape structure and Dimensions ( Refer to below in this page. )The carrier tape has the heat pressed structure of PS material carries tape and PET material cover tape. (2) Reel structure and Dimensions (Refer to the attached sheet, Page 10)The taping reel shall be of plastic (PS material)(3) Direction of product insertion (Refer to the attached sheet, Page 10) (4) The cover tape and carrier tape in one weel shall be joint less.(5) To repair failure-taped devices, cutting a bottom of carrier tape or a cover tape with a cutter. After replacing the cut portion shall be sealed with adhesive tape. 6.2.2 Adhesiveness of cover tapeThe exfoliation force between carrier tape and cover tape shall be 0.2N to 0.7N 6.2.3 Rolling method and quantityWind the tape back on the reel so that the cover tape will be outside the tape. Attach more than 18cm of blank tape to the trailer and the leader of the tape And fix the leader with adhesive tape. One reel basically contain 2000pcs6.2.4 Outer packing appearance (Refer to the attached sheet, Page 10)6.2.5 The label with following information shall be pasted at appointed place of the outer packing case. *Model No. *( Business dealing name ) *Lot No. *Quantity *Country of origin *Company name *Inspection date specified 6.2.6 Storage conditionTaped products shall be stored at the temperature 5 to 30℃ and the humidity 70%RH or lessaway from direct sunlight.6.2.7 Safety protection during shippingThere shall be no deformation of component or degradation of electrical characteristics due to shipping.Dimensions list (Unit : mm)A B CD E FGH I J K 16.0±0.3 7.5±0.1 1.75±0.1 8.0±0.12.0±0.14.0±0.1 φ1.5 10.3±0.1 0.40±0.05 4.0±0.15.3±0.110/10Direction of product insertion Reel structure and Dimensions de afcbg Pull-out directiona b c d(330) 17.5±1.5 φ100.0±1.0 φ13.0±0.5efg φ21.0±1.0 2.0±0.52.0±0.5Dimensions list (Unit : mm)Outer packing appearance Regular packing mass : Approx. 2.6kg ( )：Reference dimensionsCushioning padTotal 4 sheets :Each 1sheet in top side, bottom side ,and between each reels.Attachment-1Pre-heat150℃to 180℃, 120s or lessReflow220℃or more, 60s or lessTerminal：260℃peak(Package surface：250℃peak)1min 2min 3min 4min100℃200℃300℃Precautions for Photocouplers1 Cleaning(1) Solvent cleaning : Solvent temperature 45℃or lessImmersion for 3 min or less(2) Ultrasonic cleaning : The effect to device by ultrasonic cleaning differs by cleaning bath size, ultrasonic power output,cleaning time, PCB size or device mounting condition etc. Please test it in actual using conditionand confirm that any defect doesn't occur before starting the ultrasonic cleaning.(3) Applicable solvent : Ethyl alcohol, Methyl alcohol, Isopropyl alcoholWhen the other solvent is used, there are cases that the packaging resin is eroded.Please use the other solvent after thorough confirmation is performed in actual using condition. 2. Circuit design(1) The LED used in the Photocoupler generally decreases the light emission power by operation.In case of long operation time, please design the circuit in consideration of the degradationof the light emission power of the LED. (50%/5years)(2) There are cases that the deviation of the CTR and the degradation of the relative light emission powerof the LED increase when the setting value of I F is less than 1.0mA. Please design the circuit in consideration of this point.3. Precautions for Soldering(1) In the case of flow soldering (Whole device dipping .)It is recommended that flow soldering should be at 270℃or less for 10 s or less(Pre-heating : 100 to 150℃, 30 to 80s). (2 times or less)(2) If solder reflow :It is recommended to be done at the temperature and the time within the temperature profile as shownin the figure below. (2 times or less)(3) In the case of hand solderingWhat is done on the following condition is recommended.( 2 times or less)Soldering iron temperature : 400℃or lessTime : 3s or less(4) The form of a lead tip partThere is production tolerance as shown in the following figure(5) Other precautionsDepending on equipment and soldering conditions (temperature, Using solder etc.),the effect to the device and the PCB is different.Please confirm that there is no problem on the actual use conditions in advance.。
B-38BMILLIVOLT 压力传感器产品说明书
0 to 1000 0 to 68.9 PX6[*]2-1KGV D P41-S, DP25B-S, DP302-S
0 to 2000 0 to 138
PX6[*]2-2KGV D P41-S, DP25B-S, DP302-S
0 to 3000 0 to 207
PX6[*]2-3KGV D P41-S, DP25B-S, DP87
PT06F8-4S mating connector,
sold separately.
MILLIVOLT OUTPUT PRESSURE TRANSDUCERS
SQUARE
U All Stainless Steel Case
P-DPG500 Fig. 1
Actual size.
PX602-1KGV, cable style.
20.32
Pin Wire
(0.8)
A Red +Exc
B Green +Out
C Black -Out
D White -Exc
Hysteresis: ±0.2% Repeatability: ±0.05%
To Order
Stability: ±1%/year
Zero Balance: ±1%
Durability: 100 million cycles
Operating Temp: -48 to 91°C (-55 to 195°F)
Compensated Temp: -29 to 82°C (-20 to 180°F)
Thermal Zero Effect: ±0.07% full scale/°C
Thermal Span Effect: ±0.07% full scale/°C
BTLY技术规格书
矿物质电缆技术条款矿物绝缘电力电缆一般要求采用知名品牌。
采用标准电缆的制造、试验和验收除了应满足本技术规格书的要求外，还应符合但不限于如下标准：GB/T19001-2000 ISO9001：2000 《国家质量标准》GB/T-24001 ISO14001：1996 《国家环境标准》GB/T19022.1-1994 《国家计量标准》GB/T 12706.1-2008 额定电压1kV（Um =1.2kV）到35kV（Um =40.5kV）挤包绝缘电力电缆及附件第1部分：额定电压1kV（Um= 1.2kV）和3kV（Um=3.6kV）电缆BS6387-1994 《电线电缆燃烧温度试验方法》GB/T19666－2005 《阻燃和耐火电线电缆通则》GB/T18380.3、 IEC60332 《成束燃烧实验标准》GB/T3048-2007 《电线电缆电性能试验方法》GB/T3956-2008 《电缆的导体》GB/T19216-2003 《电线电缆缆耐火特性试验方法》GB50217-2007 《电力工程电缆设计规范》GB50016－2006 《建筑设计防火规范》JB/T6037-1992 《工程机械电线电缆的识别标志通则》GB/Tl7650.1-1998 《取自电缆或光缆的材料燃烧时释出气体的试验方法第一部分卤酸气体量的测量》GB/T 17650.2-1998 《取自电缆或光缆的材料燃烧时释出气体的试验方法用测量pH值和电导率来测定气体的酸度》GB/T 17651.2-1998 《电缆或光缆在特定条件下燃烧的烟密度测定第2部分：试验步骤和要求》GB/T 18380.3-2000 《电缆在火焰条件下的燃烧试验成束电线或电缆的燃烧试验方法》GB/T 19216.21-2003 《在火焰条件下电缆或光缆的线路完整性试验第21部分：试验步骤和要求—额定电压0.6/1kV及以下电缆》JB/T 8137-1999 《电线电缆交货盘》企业必须按ISO9000系列标准组织生产，对产品生产过程进行严格的质量控制。
btly矿物绝缘电缆直径规格
btly矿物绝缘电缆直径规格1. 引言矿物绝缘电缆是一种用于输送电力的电缆，它采用矿物绝缘材料对电线进行绝缘，以保证电力的安全传输。
btly矿物绝缘电缆是其中一种常见的规格，本文将重点介绍btly矿物绝缘电缆的直径规格。
2. btly矿物绝缘电缆概述btly矿物绝缘电缆是一种多芯非屏蔽电缆，具有良好的电气性能和机械性能。
它广泛应用于石油、化工、冶金、电力等行业，用于输送电力和信号。
3. btly矿物绝缘电缆直径规格btly矿物绝缘电缆的直径规格是指其外径和内径的尺寸范围。
根据不同的用途和要求，btly矿物绝缘电缆的直径规格有所差异。
以下是一些常见的规格范围：•外径范围：3mm - 100mm•内径范围：1mm - 50mm需要注意的是，具体的直径规格可以根据用户的需求进行定制，以满足特殊场景下的使用要求。
4. btly矿物绝缘电缆直径规格的影响因素btly矿物绝缘电缆的直径规格受到多种因素的影响，主要包括以下几个方面：4.1 电力输送能力直径较大的电缆通常能够承受更大的电流，因此在需要输送大功率电力的场景下，通常会选择较大直径的btly矿物绝缘电缆。
4.2 空间限制在一些狭小的空间中，只能使用较小直径的电缆。
因此，当空间有限时，需要选择较小直径的btly矿物绝缘电缆来满足需求。
4.3 机械强度要求在一些特殊的环境中，电缆需要具备较高的机械强度，以防止外部物体对其造成损害。
较大直径的btly矿物绝缘电缆通常具有更高的机械强度，可以提供更好的保护。
4.4 信号传输要求在一些需要传输信号的场景中，电缆的直径规格也会对信号的传输质量产生影响。
较小直径的btly矿物绝缘电缆通常具有较低的传输损耗，适用于对信号传输质量要求较高的场景。
5. btly矿物绝缘电缆直径规格的选择根据具体的使用场景和要求，选择合适的btly矿物绝缘电缆直径规格非常重要。
以下是一些选择的参考因素：•电力需求：根据需要输送的电力大小选择合适的直径规格，确保电力传输的安全和稳定。
BTC-ASV Bluetooth 无线灌溉控制器使用手册说明书
BTC-ASV Bluetooth®Programador de riego con bateríasM A N U A L D E I N S T R U C C I O N E SCertificado FCC | Certificado Bluetooth® | Impermeable | 3 años de GarantíaGracias por adquirir el programador de riego con baterias de una estación BTC-ASV de DIG. Este manual describe la puesta en marcha y el funcinamiento rápido de la serie 410BT. Después de leer este manual y familiarizarse con la funcionalidad básica del controlador, utilice el manual como referencia para tareas menos comunes en el futuro.2.El programador de riego de la serie BTC-ASV que utiliza la aplicación gratuita DIG BTT para Android™ o iPhone®, emplea lo últimoen tecnología Bluetooth®. El BTC-ASV está disponible como un programador de una sola estación alimentado por dos pilas AA que pueden durar hasta un ario usando baterías alcalinas de marca. El programador está cubierto por una carcasa compacta e impermeable para protegerlo de la degradación.1. Abra la tapa del compartimiento de labatería girándola hacia la izquierda.2. Instale dos baterfas nuevas, de marca,alcalinas AA (no incluidas) y tengaen cuenta la dirección correcta de lospolos, positivo y negativo orientaciónen la parte inferior del controlador.3. Inserte y enrosque la tapa de labatería en sentido horario. Asegúresede que aprieta la tapa firmementesolo con la mano. El controladoraparecerá ahora en la aplicación parateléfonos inteligentes y está listopara ser conectado y programado.23Tapa de antisifón TapaEtiqueta de la FCCUn botón para riego y resetTapa para compartimiento de bateríaSolenoide Salida para rosca de tubo Control the Tornillo de operación manual Entrada para roscade tuboEl BTC-ASV puede ser instalado directamente a un tubo PVC con dos adaptadores PVC machos (no incluidos). Entrada de 3/4 pulgadas FNPT, salida de 3/4 pulgadas FNPT.Presión de operación: de 10 a 125 PSIPresión recomendada para operación: de 10 a 80 PSINOTA: El BTC-ASV debe ser instalado por lo menos a 6 pulgadas por arriba de la cabeza rociadora más alta en el sistema, o pueden ocurrir retornos de drenaje. No deben instalarse válvulas adicionales de control en la parte de salida de agua de la válvula antisifón. La válvula no debe ser operada por más de 12 horas en un periodo de 24 horas. Consulte la normativalocal para conocer los detalles específicos.1. Antes de la instalación deje correr el agua por la línea principalhasta que el agua salga clara.2. Cierre la fuente principal de suministro de agua.3. Instale la válvula antisifón directamente al tubo PVC utilizando un adaptador masculino (Figura 5a and 5b) de PVC de 3/4 pulgadas o utilice un adaptador de manguera de 3/4 pulgadas Schedule 80.NOTA: Cubra todas las uniones con cinta de teflón. No utilice cemento para tubos en las válvulas, ya que dañará las válvulas y la garantía quedará inválida. Asegúrese de que cuando envuelva las unionescon cinta de teflón, no entre el exceso de la cinta a la parte internade la unión. Ajuste las uniones con una llave inglesa, pero no apriete demasiado.La flecha en el cuerpo de la válvula indica la dirección del flujo de agua (vea Figura 5a y Figura 5b).45La aplicación DIG BTT busca automáticamente los programadores cercanos después de la instalación. Cualquier controlador DIG Bluetooth® dentro de una señal de 50 ft. (15 metros) aparecerá en la pantalla.• Su nuevo programador aparecerá como el controlador BT. Suimagen por defecto, estado (regando -ON- o no regando - OFF-), la fuerza de la conexión y la duración de la batería aparecerán a su lado.• Toque el controlador para conectarse y comenzar la programación. Puede accender al Historial De Conexiones y Contáctenos a tráves del icono información en la esquina superior derecha de la pantalla. • El historial de conexiones le permite ver cada programador ytemporizador conectado desde este teléfono o tableta. Almacena la última información recibida de cada programador, pero no se puede realizar ninguna edición.Al eliminar una entrada eliminará todos los datos guardados para esa unidad. Las contraseñas y/o imágenes deben ser reingresadas. Para borrar una entrada, tócalo y selecciona el ícona de la papelera. 67Imagen por defectoEstado de la batería Fuerza de conexiónIndica si el programador está actualmente funcionando o noUna vez conectado, aparecerá la pantalla de inicio. Esta pantalla tiene todo lo necesario para programar el controlador.Por defecto, el programa del controlador está apagado. Para encenderlo, presione el interruptor bajo el área de “Programa”. Se volverá verde, el área del programa se activará indicando que está activo y que se puede modificar.El contralador ya está listo para ser programado. Simplemente seleccione el programa (semanal, par/impar, o cíclico), establezca su fecha de inicio o días, agregar aperturas, y establecer una ducración. El controlador se actualiza inmediatamente cada vez que se toca un botón.8inicioActivar oprogramaLosHome (página actual)Ajustes delcontroladorActivaciónmanual9La pantalla de ajustes del controlador contiene todo lo necesario para manejar totalmente su sistema de riego. Se puede acceder seleccionando el botón de ajustes del controlador en la parte inferior de la pantalla. En esta pantalla puede activar o desactivar todos los ajustes del programadora través del interruptor de sistema activo, agregue un retraso de lluvia para apagar el programador por un tiempo limitado, presupueste cada mes para modificar la duración del riego según la temporada, establezca fechas específicas en las que el programador no debería funcionar y vea el historial de los 12 meses del controlador.Usa el menú de ajustes para cambiar el nombre del programadora also reconocible y carga una imagen para realizar en una futura visualización un reconocimiento fácil y rápido. Establezca una contraseña para evitar que usuarios no autorizados se conecten a su programador. La contraseña se guarda en el teléfono por lo que (casi) nunca tendrá que ingresarla nuevamente (a menos que lo cambie o cuando se concecte al temporizador con un nuevo teléfono).1011El pro - Establecer contraseña para el programador. Sólo se verá la contraseña al ingresar al programador desde un teléfono nuevo. Resetear el controlador para restablecer la contraseña si se olvidala duración solamente)para los 12 Establecer programadorLa pantalla de activación manual permite la operación del programador. Se puede acceder seleccionando el botón de activación manual en la parte inferior derecha de la pantalla.Para ejecutar manualmente el programador, toque el botón a la derecha de la pantalla. Este botón tambien se puede utilizar para detener cualquier ejecución existente. El tiempo de ejecución manual predeterminado es de cinco minutos; esto puede ser cambiado tocando el tiempo y cambiándolo.El programador también puede ejecutarse manualmente desde el mismo programador pulsando el botón de gota de agua .La duración de esta ejecución manual es igual a la duración del programado. El botón también se puede utilizar para finalizar cualquier riego.12duración del13Mantenga presionado el botón del BTC-ASV durante 15 segundos. Esto eliminará todas las configuraciones dela aplicación, la información histórica y cualquier contraseña establecida. ¡Esta es la única forma de eliminar una contraseña, así que trate de no olvidarla!Si tiene algún problema con este producto o si no entiende sus múltiples funciones, consulte primero este manual de instrucciones. Si requiere asistencia adicional, DIG ofrece el siguiente servicio al cliente:• DIGPRO Technical Service USA:El equipo de servicio técnico de DIG esta disponible para responder preguntas en inglés y español de 8:00 ama 5:00 PM (PST) de lunes a viernes (excepto festivos) al 1.800.344.2281 o 1.760.727-0914•Laspreguntastambiénpuedenenviarseporcorreoelectró************************************.727.0282• Los documentos de especificación y los manuales están disponibles para descargar en • Asistencia al cliente fuera de los EE. UU.: Póngase en contacto con su distribuidor localEste dispositivo cumple con los límites de exposición a la radiación FCC e IC establecidos para un entorno no controlado. El dispositivo debe instalarse y operarse con una distancia mínima de 20 cm entre el emisor y su cuerpo. Este dispositivo no debe colocarse ni funcionar junto con ninguna otra antena o transmisor.I. Los cambios o modificaciones no aprobados expresamente por DIG Corporation podrían anular la autoridad del usuario para operar el equipo.II. Este equipo ha sido probado y cumple con los límites para un dispositivo digital de Clase B, de conformidad con la Parte 15 de las Reglas de la FCC. Estos límites están diseñados para proporcionar una protección razonable contra interferencias perjudiciales en una instalación residencial. Este equipo genera, utiliza y puede emitir energía de radiofrecuencia y, si no se instala y utiliza de acuerdo con las instrucciones, puede causar interferencias perjudiciales en las comunicaciones de radio.Sin embargo, no hay garantía de que no se produzcan interferencias en una instalación en particular. Si este equipo causa interferencias perjudiciales en la recepción de radio o televisión, lo cual puede determinarse encendiendo y apagando el equipo, se recomienda al usuario que intente corregir la interferencia con uno de las siguientes medidas: Reorientar o reubicar la antena receptora. Aumente la separación entre el equipo y el receptor. Conecte el equipo a una toma de corriente en un circuito diferente al que está conectado el receptor. Consulte con el distribuidor o con un técnico de radio/TV experimentado para obtener ayuda.III. Industria CanadaEste dispositivo cumple con el RSS de Industry Canada para dispositivos de radio sin licencia. El funcionamiento está sujeto a las siguientes dos condiciones: (1) este dispositivo no puede causar interferencias, y (2) el dispositivo debe aceptar cualquier interferencia recibida, incluso si la interferencia puede causar un funcionamiento no deseado.14DIG CORPORATION garantiza que estos productos están libres de defectos de material y mano de obra, por un perfodo de tres años desde la fecha de compra. Esta garantía no cubre daños que se produzcan por accidentes,uso indebido, negligencia, modificación, instalación inadecuada o sometimiento a presión de tubería por sobre8 bares (125 libras por pulgada cuadrada) de válvulas antisifonaje y accionadores. Esta garantía se extenderá solamente al comprador original del producto para uso propio. La obligación de DIG CORPORATION, conforme a esta garantía, se limita a la reparación o reemplazo de este producto en su fabrica, el cual debera ser devuelto ala fabrica dentro de los tres años despues de la compra original y que, luego de examinarlo, se haya determinado que contiene defectos de material y mano de obra. DIG CORPORATION NO SERA EN NINGÚN CASO RESPONSABLE POR CUALQUIER DAÑO INCIDENTAL O EMERGENTE DE NINGÚN TIPO; LA UNICA OBLIGACIÓN DE DIG ESTA LIMITADA A LA REPARACIÓN O REEMPLAZO DE PRODUCTOS DEFECTUOSOS. ALGUNOS ESTADOS NO PERMITENLA EXCLUSION O LIMITACIÓN DE DAÑOS INCIDENTALES O EMERGENTES, POR LO QUE ES POSIBLE QUE LAS LIMITACIONES ANTERIORES NO SE APLIQUEN A USTED. El uso sin supervisión por perfodos prolongados de tiempo sin inspección para verificar el funcionamiento adecuado esta mas alla del uso previsto de este productoy cualquier daño que se produzca por dicho uso no sera responsabilidad de DIG CORPORATION. No hay garantíasque se extiendan mas alla de la descripción en este anverso. En el caso de comprar el producto para un uso queno sea con propósitos de irrigación, mediante el presente documento DIG CORPORATION niega cualquier garantía implícita, lo que incluye cualquier garantía de comercialización e idoneidad para un propósito en particular. Encaso de comprar este producto para fines personales, familiares o domesticos, DIG CORPORATION niega cualquier garantía en la medida que lo permita la ley. En la medida en que cualquiera de estas exenciones o garantíasimplícitas sean ineficaces, entonces cualquier garantía implícita se limitará a un perfodo de tres años de duracióna partir de la fecha de la compra original para uso del comprador. Algunos estados no permiten las limitacionesde la duración de las garantías implícitas, por lo que la limitación anterior podría no aplicarse para usted. Conel fin de obtener funcionamiento conforme a esta garantía, la unidad debe devolverse a la fabrica, junto con un comprobante de compra que indique la fecha original de compra, con envío pagado previamente y dirigido comose indica a continuación: DIG CORPORATION, 1210 Activity Drive, Vista, CA 92081. Las unidades reparadas o reemplazadas se enviaran pagadas previamente al nombre y dirección que se proporcionó con la unidad devuelta bajo la garantía. Permita cuatro semanas para el tiempo de reparaciones y envío. Es posible que se rechace la reparación de las unidades dañadas de otra manera fuera de la garantía o que se realicen a un costo o cargo razonable a elección de DIG CORPORATION. Esta garantía le confiere derechos legales específicos y es posible que tenga otros derechos, los cuales varían de estado en estado.15E e-mail:***************26-308 REVA 031622Impreso en USADIG es una marca de servicio registrada de DIG Corp.1210 Activity DriveVista, CA 92081-8510, USA。
GN-AL(BTLY)隔离型矿物绝缘电缆产品(2)
矿难案例
1 矿难原因矿车撞断电缆短路引起大火 陕西韩城小南沟煤矿“717”重大事故 2014年07月17日 该矿当晚8时许发生火 灾，矿井内使用国家已命令淘汰的木支护，才使短路的电缆烧着木支护。导致重 大事故发生。煤矿事故已造成28人亡 . 2 湘潭矿难源于电缆起火 2014年1月5日下午，在湖南湘潭县谭家山镇立胜煤矿井下240米处发生电缆 起火事故，导致28人被困井下，事故已造成25名矿工遇难。
温度曲线图 500 450 400 350 300 250 200 150 100 50 0
温度
10
20
30
40
50
60
70
80
90
0
时间
10 0 11 0 12 0 13 0 14 0 15 0 16 0 17 0 18 0
超越180
解剖情况
五、 隔离型（柔性）矿物绝缘电缆试验
经受180min后耐火试验现场（释放结晶水）
GN-AL (BTLY)隔离型（柔性）矿物绝缘电缆
--新一代防火电缆
上海胜华电气股份有限公司
安全可靠
开发背景
一、隔离型（柔性）矿物绝缘电缆开发背景：
目前应用的矿物绝缘电缆发明于19世纪90年代，
至今已有120多年历史 。加工工艺、产品水平基本
维持原状。并且在大量使用。
实心近似圆导体 (不绞合) 氧化镁粉
铜金属套
过时更新
电缆现状
耐火电缆现状
NH
BBTRZ
YTTW
新结构
二、隔离型（柔性）矿物绝缘耐火电缆专利
三、 隔离型（柔性）矿物绝缘电缆
导体 复合绝缘 金属套 隔离套 隔离层填充 饶包层 环保无卤护套
PLC控制柜技术规格书
PLC控制系统技术规格书目录未定义书签。
!错误............................................ 一、技术规范．1.范围 .................................................. 错误!未定义书签。
2.规范和标准 ............................................ 错误!未定义书签。
3. 技术要求 ............................................. 错误!未定义书签。
4 工程服务 .............................................. 错误!未定义书签。
二、供货范围 ............................................ 错误!未定义书签。
1 一般要求 ............................................. 错误!未定义书签。
2 供货范围 ............................................. 错误!未定义书签。
三、技术资料及交付进度 .................................. 错误!未定义书签。
四、技术服务和设计联络 .................................. 错误!未定义书签。
一、技术规范1.范围总则本协议适用于华能曹妃甸港口有限公司翻车机煤粉尘治理项目PLC控制系统的功能设计、结构、性能、安装和试验等方面的技术要求。
本协议所提出的是最低限度的技术要求，并未对一切技术细节作出规定，也未充分引述有关标准和规范的条文。
供方应保证提供符合国家有关安全、环保等强制规范要求和现行中国或国际通用标准的优质产品。
供方提供的设备应是全新的和先进的，并经过运行实践已证明是完全成熟可靠的产品。
09-湿膜加湿器技术规格书
技术规格书阿里巴巴集团—技术保障部数据中心基础设施工程湿膜加湿器技术规格书阿里巴巴集团2015年3月文档基本信息文档说明此文件属于阿里巴巴集团技术保障部机密文件，经过有关方面批准方可获取并在项目中使用。
保密说明本技术需求书为商业机密文件，所有信息均为阿里巴巴集团所有，仅供阿里巴巴集团数据中心基础设施工程使用。
务必妥善保管并且仅在与项目有关人员范围内使用，未经阿里巴巴集团明确书面许可，不得以任何形式或手段（包括电子或机械复印、录音或其他形式）对本文档的任何部分进行复制、存储、引入检索系统或者传播。
特别声明本建议书内容，包括技术要求和配置，只适用于阿里巴巴集团数据中心基础设施工程项目。
尽管阿里巴巴集团已经尽力使本文档内容完整和有效，但仍可能有技术方面不够准确的地方或印刷错误。
如果需求有所变化，阿里巴巴集团将对有关内容进行相应的调整，并在未来版本中体现。
Alibaba是阿里巴巴集团的注册商标。
本文档提及的其他公司、产品和服务的名称，可能是其他公司的商标或服务的标志。
本文档仅对湿膜加湿器提出技术规格要求。
目录1.概述 (1)2.供货及服务内容 (1)3.技术服务要求 (1)4.报价要求 (2)5.技术要求 (2)1.概述1)报价的设备必须符合招标图纸和本规范书技术要求部分的所有要求。
2)投标方应用中文提供满足本招标文件要求的投标文件，投标文件必须对本文件技术要（1）人员培训的技术要求见标书技术部分；（2）投标人对招标人技术人员进行免费培训，由此发生的交通、食宿等费用投标人解决。
4.报价要求1)投标人应列出所提供的设备主要部件清单。
2)投标人应列出所提供的设备及其主要部件的单价、合价及总价，其中包括其名称、规格型号、产地和数量。
3)投标人应提供安装材料、专用工具及设备手册的报价。
4)投标人应列出必要的备品、备件名称和数量，并有备品、备件的清单,如有必要其费用可列出，不计入总价。
5)投标人报价应报将设备运到用户安装现场的价格。
贝利摩 B310 铜合金球和杆技术数据表说明书
B310•Stainless Steel Ball and StemTechnical dataFunctional data Valve Size0.5" [15]Fluid chilled or hot water, up to 60% glycolFluid Temp Range (water)0...250°F [-18...120°C]Body Pressure Rating600 psiBody pressure rating note600 psiClose-off pressure ∆ps200 psiFlow characteristic A-port equal percentage, B-port modified forconstant common port flowServicing maintenance-freeFlow Pattern3-way Mixing/DivertingLeakage rate0% for A – AB, <2.0% for B – ABControllable flow range75°Cv 1.2Cv Flow Rating A-port: as stated in chart B-port: 70% of A – ABCvMaterials Valve body Nickel-plated brass bodyStem stainless steelStem seal EPDM (lubricated)Seat PTFECharacterizing disk TEFZEL®Pipe connection NPT female endsO-ring EPDM (lubricated)Ball stainless steelSuitable actuators Non-Spring TRLRB(X)NRB(X) N4Spring TFB(X)LFSafety notesWARNING: This product can expose you to lead which is known to the State of California tocause cancer and reproductive harm. For more information go to B310ApplicationProduct featuresThis valve is typically used in air handling units on heating or cooling coils, and fan coil unit heating or cooling coils. Some other common applications include Unit Ventilators, VAV box re-heat coils and bypass loops. This valve is suitable for use in a hydronic system with variable or constant flow.Flow/Mounting detailsDimensionsDimensional drawingsLRB, LRXType DN Weight [kg][kg]B310150.30AB C D E F H1H28.5" [216]2.4" [60] 5.2" [132] 4.6" [117] 1.3" [33]1.3" [33] 1.2" [30]1.1" [28]LRQB, LRQXAB C D E F H1H28.9" [226]2.4" [60]5.7" [146]5.2" [131]1.6" [40]1.6" [40]1.2" [30]1.3" [33]TRAB C D E F 3.7" [95]2.4" [60]4.8" [122]4.2" [107]1.3" [33]1.2" [31]B310LFA B C D E F7.9" [200] 2.4" [60] 5.7" [146] 5.1" [129] 1.8" [46] 1.8" [46]ARB N4, ARX N4A B C D E F11.4" [289] 2.4" [60]7.2" [184] 6.7" [169] 3.1" [80] 3.1" [80]LRX24-MFT Modulating, Non-Spring Return, 24 V, Multi-Function Technology®Technical dataElectrical data Nominal voltage AC/DC 24 VNominal voltage frequency50/60 HzPower consumption in operation 2.5 WPower consumption in rest position 1.2 WTransformer sizing 5 VA (class 2 power source)Electrical Connection18 GA plenum cable with 1/2" conduitconnector, degree of protection NEMA 2 / IP54,3 ft [1 m] 10 ft [3 m] and 16ft [5 m]Overload Protection electronic thoughout 0...90° rotationFunctional data Operating range Y 2...10 VOperating range Y note 4...20 mA w/ ZG-R01 (500 Ω, 1/4 W resistor)Input Impedance100 kΩ for DC 2...10 V (0.1 mA), 500 Ω for 4 (20)mA, 1500 Ω for PWM and On/OffOperating range Y variable Start point 0.5...30 VEnd point 2.5...32 VOptions positioning signal variable (VDC, on/off, floating point)Position feedback U 2...10 VPosition feedback U note Max. 0.5 mAPosition feedback U variable VDC variableDirection of motion motor selectable with switch 0/1Manual override external push buttonAngle of rotation90°Angle of rotation note adjustable with mechanical stopRunning Time (Motor)default 150 s, variable 35...150 sRunning time motor variable35...150 sNoise level, motor35 dB(A)Position indication Mechanically, pluggableSafety data Degree of protection IEC/EN IP54Degree of protection NEMA/UL NEMA 2Enclosure UL Enclosure Type 2Agency Listing cULus acc. to UL60730-1A/-2-14, CAN/CSAE60730-1:02, CE acc. to 2014/30/EUListed to UL 2043 - suitable for use in airplenums per Section 300.22(C) of the NEC andSection 602 of the IMCQuality Standard ISO 9001Ambient temperature-22...122°F [-30...50°C]Storage temperature-40...176°F [-40...80°C]Ambient humidity Max. 95% RH, non-condensingServicing maintenance-freeLRX24-MFTMode of operationWeightWeight1.5 lb [0.70 kg]Product featuresPVC W'Shld for GV w/UGLK (AM)AccessoriesGatewaysDescriptionType Gateway MP to BACnet MS/TP UK24BAC Gateway MP to Modbus RTU UK24MOD Gateway MP to LonWorksUK24LON Electrical accessoriesDescriptionType Battery backup system, for non-spring return models NSV24 US Battery, 12 V, 1.2 Ah (two required)NSV-BAT Auxiliary switch 1 x SPDT add-on S1A Auxiliary switch 2 x SPDT add-onS2AFeedback potentiometer 140 Ω add-on, grey P140A GR Feedback potentiometer 1 kΩ add-on, grey P1000A GR Feedback potentiometer 10 kΩ add-on, grey P10000A GR Feedback potentiometer 2.8 kΩ add-on, grey P2800A GR Feedback potentiometer 500 Ω add-on, grey P500A GR Feedback potentiometer 5 kΩ add-on, greyP5000A GR Service toolsDescriptionTypeConnection cable 10 ft [3 m], A: RJ11 6/4 ZTH EU, B: 3-pin Weidmüller and supply connectionZK4-GEN Service Tool, with ZIP-USB function, for programmable and communicative Belimo actuators, VAV controller and HVAC performance devicesZTH USElectrical installationINSTALLATION NOTESProvide overload protection and disconnect as required.Actuators may be connected in parallel. Power consumption and input impedance must beobserved.Actuators may also be powered by DC 24 V.Only connect common to negative (-) leg of control circuits.A 500 Ω resistor (ZG-R01) converts the 4...20 mA control signal to 2...10 V.Control signal may be pulsed from either the Hot (Source) or Common (Sink) 24 V line.For triac sink the Common connection from the actuator must be connected to the Hotconnection of the controller. Position feedback cannot be used with a triac sink controller; theactuator internal common reference is not compatible.IN4004 or IN4007 diode. (IN4007 supplied, Belimo part number 40155).Actuators with plenum cable do not have numbers; use color codes instead.Meets cULus requirements without the need of an electrical ground connection.Warning! Live electrical components!During installation, testing, servicing and troubleshooting of this product, it may be necessary to work with live electrical components. Have a qualified licensed electrician or other individual who has been properly trained in handling live electrical components perform these tasks. Failure to follow all electrical safety precautions when exposed to live electrical components could result in death or serious injury.LRX24-MFT Wiring diagramsOn/Off Floating PointVDC/mA Control PWM ControlOverride ControlDimensions。
Link-Belt Cranes 模型 RTC-8030 II 技术数据与容量说明书
15685 (supersedes 5671)-0614-E8T30 US ton 30 metric tonTechnical DataSpecifications & CapacitiesCAUTION: This material is supplied for reference use only. Operator must refer toin-cab Crane Rating Manual and Operator's Manual to determine allowable crane lifting capacities and assembly and operating procedures.5685 (supersedes 5671)-0614-E85685 (supersedes 5671)-0614-E8Table Of Contents....................................................Boom, Attachments, and Upper Structure1 ....................................................................................Boom1Boom Head1 .......................................................................................................................................................Boom Elevation1.........................................................Auxiliary Lifting Sheave - Optional1..........................................................Hook Blocks and Balls - Optional1...........................................................................Fly - Optional1................................................................Operator's Cab and Controls1 ....................................................................................Swing2.................................................................................Electrical2.........................................................................Load Hoist System3...................................................................Load Hoist Performance3....................................................2M Main and Optional Auxiliary Winches3..........................................................................Hydraulic System3............................................................................ Counterweight3 ....................................................................................Carrier4 ...................................................................................General4Outriggers4 .........................................................................................................................................................Steering and Axles4............................................................................... Suspension4 ..........................................................................Tires and Wheels4...................................................................................Brakes4.................................................................................Electrical4...................................................................................Engine4 .............................................................................. Transmission4.............................................................Carrier Speeds and Gradeability5.................................................................................Fuel Tank5..........................................................................Hydraulic System5Pump Drive5 ...............................................................................................................................................................Axle Loads6 ........................................................................General Dimensions7....................................................................Working Range Diagram8 .......................................................................Boom Extend Modes9.................................................Main Boom Lift Capacity Charts - Standard10...................................................Fully Extended Outriggers - 360° Rotation10.........................On Tires - Stationary - Boom Centered Over Front Between Tire Tracks11..................................On Tires - Pick & Carry (Creep) - Boom Centered Over Front11.......................................................On Tires - Stationary - 360° Rotation11...............................................Fly Attachment Lift Capacity Charts - Optional12 Fully Extended Outriggers - 360° Rotation12......................................................................................................Fully Extended Outriggers - 360° Rotation135685 (supersedes 5671)-0614-E8..........................................Main Boom Lift Capacity Charts - Optional (Metric)14...................................................Fully Extended Outriggers - 360° Rotation14.........................On Tires - Stationary - Boom Centered Over Front Between Tire Tracks15..................................On Tires - Pick & Carry (Creep) - Boom Centered Over Front15.......................................................On Tires - Stationary - 360° Rotation16.......................................Fly Attachment Lift Capacity Charts - Optional (Metric)16...................................................Fully Extended Outriggers - 360° Rotation16...................................................Fully Extended Outriggers - 360° Rotation171 5685 (supersedes 5671)-0614-E8Boom, Attachments, and Upper StructureJ BoomDesign - Four section, box type construction of high tensile steel consisting of one base section and three telescoping sections. The vertical side plates have diamond shaped steel impressions for superior strength to weight ration. The first telescoping section extends independently by means of one double-acting, single stage hydraulic cylinder with integrated holding valves. The second and third telescoping sections extend proportionally by means of one double-acting, single stage cylinder with integrated holding valves and cables.BoomS29 ft-91 ft 4 in (8.84-27.84m) four section full power boomS Two mode boom extension: A-max mode provides superior capacities by extending the first telescoping section to 49 ft 9 in (15.16m). Standard mode synchronizes all the telescoping sections proportionally to 91 ft 4 in (27.84m). Controlled from the operator's cab.S Mechanical boom angle indicatorS Maximum tip height for A-max mode is 66 ft 2 in (20.2m) and standard mode is 100 ft 6 in (30.6m).Boom HeadS Four 10.63 in (27.0cm) root diameter nylon sheaves to handle up to eight parts of lineS Easily removable wire rope guardsS Rope dead end lugs on each side of the boom headS Boom head is designed for quick-reeve of the hook blockBoom ElevationS One double acting hydraulic cylinder with integral holding valveS Boom elevation: -3° to 78°Auxiliary Lifting Sheave - OptionalS Single 10.63 in (27.0cm) root diameter steel sheaveS Easily removable wire rope guardsS Does not affect erection of the fly or use of the main head sheavesHook Blocks and Balls - OptionalS30 ton (27.2mt) 3 sheave quick-reeve hook block with safety latchS8.5 ton (7.7mt) swivel and non-swivel hook balls with safety latchFly - OptionalS25 ft (7.62m) one piece lattice fly, stowable. Maximum tip height is 124.63 ft (37.99m).S27 ft (8.23m) one piece lattice fly, stowable, offsettable to 2°, 20°, and 40°. Maximum tip height is 126.33 ft (38.51m).S27-44 ft (8.23-13.41m) two piece bi-fold lattice fly, stowable, offsettable to 2°, 20°, and 40°. Maximum tip height is 143.11 ft (43.62m).J Operator's Cab and Controls Environmental Cab - Fully enclosed, one person cab of galvaneal steel structure with acoustical insulation. Equipped with:S Tinted and tempered glass windowsS Large fixed front window with windshield wiper and washerS Swing up roof window with windshield wiperS Sliding left side door with large fixed windowS Sliding rear and right side windows for ventilationS Six way adjustable, cushioned seat with seat beltS Diesel fired warm-water heater with air ducts for front windshield defroster and cab floorS12 volt accessory outletS Bubble levelS Circulating fanS Adjustable sun visorS Dome lightS Cup holderS Fire extinguisherS MirrorsS Emergency steering system - optionalAir Conditioning - OptionalEngine Dependent Heater - Optional - Flameless, warm-water system that does not have a separate fuel tankSteering Column - Conventional automotive type with tilt and telescope functions for operator comfort. Steering column includes the following controls and indicators:S Tilt leverS Turn signal leverS Windshield wiper and washer switchS Headlight switchS Telescoping column lockS Steering wheelS Horn buttonS Engine ignition switchS Ignition switch lockS Hazard flasher button25685 (supersedes 5671)-0614-E8Armrest Controls - Two single axis controllers for: S SwingS Boom hoistS Main rear winchS Auxiliary front winch - optionalS Drum rotation indicationS Drum rotation indicator activation switchS Winch high/low speed and disable switch(es)S Throttle lockS Telescopic override switchesFoot ControlsS Boom telescopeS Swing brakeS Engine throttleS Carrier service brakeDash PanelControls for:S Combination steeringS4-wheel driveS Transmission gear selectionS Rated capacity limiterS Two position swing lockS Swing park brakeS Function lockoutS Outrigger systemS Upper lights - optionalS Rotating beacon - optionalS Ether start - optionalS Air conditioner and heater - optionalS Third wrap indicator activation - optionalS Boom floodlight - optionalIndicators for:S Service brakeS Rear wheel offsetS First layer/Third wrap - optionalGauges for:S Fuel levelS Hydraulic oil temperatureS Voltage indicatorS Water temperatureS Engine oil pressureS TachometerS Transmission oil temperatureCamera Display - Located on dash consoleS Displays right side of upperS Displays main and auxiliary winches Rated Capacity Limiter - Microguard graphic audio-visual warning system integrated into the dash with anti-two block and function limiter. Operating data available includes:S Crane configurationS Boom lengthS Boom head heightS Allowed load and % of allowed loadS Boom angleS Radius of loadS Actual loadS Operator settable alarms (include):S Maximum and minimum boom anglesS Maximum tip heightS Maximum boom lengthS Swing left/right positionsS Operator defined area (imaginary plane)Internal RCL Light Bar - Optional - Visually informs the operator when crane is approaching maximum load capacity with a series of green, yellow, and red lights.External RCL Light Bar - Optional - Visually informs the ground crew when crane is approaching maximum load capacity with a series of green, yellow, and red lights.J SwingMotor/Planetary - Bi-directional hydraulic swing motor mounted to a planetary reducer for 360° continuous smooth swing at 2.8 rpm.Swing Park Brake - 360°, mechanical disc brake mounted on the speed reducer. Mechanically controlled from the operator's cab.Swing Brake - 360°, foot operated, hydraulic applied disc brake mounted to the speed reducer.Swing Lock - Two-position swing lock (boom over front or rear) operated from the operator's cab.360° Positive Swing Lock - Optional - Meets New York City requirement.J ElectricalSwing Alarm - Audio warning device signals when the upper is swinging.LightsS Two working lights on front of the cab - optionalS One rotating amber beacon on top of the cab - optional S One amber strobe beacon on top of the cab - optional S Boom floodlight - Single - optionalS Boom floodlight - Dual - optionalS Boom floodlight - High intensity remote controlled -optional3 5685 (supersedes 5671)-0614-E8J Load Hoist SystemLoad Hoist Performance111,948 5 419.517453.031896.97723.57723.5 210,807 4 902.019258.5352107.38425.616149.1 39,866 4 475.121064.0385117.39328.325477.4 49,075 4 116.422969.8419127.710130.8355108.2 58,401 3 810.624775.3452137.810933.2464141.4 6------------11735.6581177.1Main (Rear) Winch Standard5/8166x19 I.W.R.C. - Right Regular Lay (Type DB)11,770 5 338.8 Optional5/81618x19 Rotation Resistant - Right Regular Lay(T ype RB)9,080 4 118.6Auxiliary (Front)Winch Standard5/8166x19 I.W.R.C. - Right Regular Lay (Type DB)11,770 5 338.8 Optional5/81618x19 Rotation Resistant - Right Regular Lay(T ype RB)9,080 4 118.62M Main and Optional Auxiliary WinchesS Bi-directional gear-type (2-speed) hydraulic motors driven through planetary reduction unit for positive control under all load conditions.S Grooved laggingS Power up/down mode of operationS Hoist drum cable followerS Drum rotation indicatorS Drum diameter: 10.63 in (27.00cm)S Rope length:S Main: 450 ft (137.1m)S Auxiliary: 450 ft (137.1m)S Maximum rope storage: 581 ft (177.1m)S Terminator style socket and wedgeIntegrated Third Wrap Indicator - Optional - Visually and audibly warns the operator when the wire rope is on the first/bottom layer and when the wire rope is down to the last three wraps.Integrated Third Wrap Function Kickout - Optional -Visually and audibly warns the operator when the wire rope is on the first/bottom layer and provides a function kickout when the wire rope is down to the last three wraps.J Hydraulic SystemCounterbalance Valves - All hoist motors, boom extend cylinders, and boom hoist cylinders are equipped with counterbalance valves to provide load lowering and prevents accidental load drop when hydraulic power is suddenly reduced.J CounterweightTotal of 9,300 lb (4 218kg) of counterweight bolted to the upper structure frame.45685 (supersedes 5671)-0614-E8CarrierJ GeneralS8 ft 6 in (3.31m) wideS11 ft 5 in (3.48m) wheelbase (centerline of first axle to centerline of second axle).Frame - Box-type, torsion resistant, welded construction made of high tensile steel. Equipped with front towing shackles, pontoon storage brackets, hook block tie back, and front, rear, and side carrier steps.J OutriggersBoxes - Two double box, front and rear welded to carrier frame.Beams and Jacks - Four single stage beams with Confined Area Lifting Capacities (CALC t) provide selectable outrigger extensions of full, intermediate, and retracted. Hydraulically controlled from the operator's cab with integral check valves.Pontoons - Four lightweight, quick release, 18.77 x 18.77 in (47.67 x 47.67cm) steel pontoons with contact area of 352 in2 (2 270.9cm2) can be stored for road travel in storage racks on the carrier.Main Jack Reaction - 50,000 lb (22 679.6kg) force and 173 psi (1 116.0kPa) ground bearing pressure.J Steering and AxlesSteering - Three independent modes consisting of conventional two wheel front, four wheel, and crab. Each mode is selected by a switch on the dash and fully controlled by the steering wheel.Drive - Two modes: 4 x 2 and 4 x 4 for off highway travel Axle 1 - Steered, non-driven for 4 x 2 and steered, driven for 4 x 4Axle 2 - Steered, drivenJ SuspensionFront - Rigid mount to the carrier frameRear - The rear axle is suspended on the oscillation cylinders with motion of the axle controlled by a four bar linkage system. The oscillation cylinders lockout when the upper structure rotates 2.5° past centerline.S Hydro-gas rear suspension - optional J Tires and WheelsFront and Rear - Four (single) 20.5R25, 24 ply rating, loader type tires on steel disc wheelsS Spare tires and wheels - optionalJ BrakesService - Full hydraulic, dual circuit, disc type brakes on all wheel ends with independent front and rear system Parking/Emergency - Spring applied, hydraulic released, cab controlled, disc type integral to the transmissionJ ElectricalTwo batteries provide 12 volt operation and startingLightsS Front lighting includes two main headlights, and two parking/directional indicatorsS Rear lighting includes two parking/directional indicators, two parking/brake lights, and two reversing lightsS Other equipment includes hazard/warning system, cab light, dash panel lighting, and signal hornJ EngineNumbers of Cylinders6Cycle4Bore and Stroke: inch (mm) 4.13 x 5.00 (105 x 127) Piston Displacement: in3 (L)402.7 (6.6)Max. Brake Horsepower: hp (kW)164 (122.2) @ 1,800 rpm Peak T orque: ft lb (Nm)504 (683) @ 1,500 rpm Alternator: volts - amps12 - 150 Crankcase Capacity: qt (L)18.4 (17.4)S Mechanically driven fan and thermostatically controlled radiatorS Water/Fuel separatorS110-volt block heaterS Glow plugs/block heaterJ TransmissionPowershift - Three speed with high/low range for 6 forward and 2 reverse gears. Front axle disconnect for two or four wheel drive. Front axle disconnects in high range.5 5685 (supersedes 5671)-0614-E8J Carrier Speeds and Gradeability6thForward2WDHi 0.70417.428.00 2.35th 2.1118.914.3210.9 4th 4.825 4.0 6.4328.33rdForward4WDLow 1.57611.618.667.62nd 4.727 4.0 6.4327.6 1st10.805 1.8 2.8982.12nd Reverse2WD 4.825 4.0 6.4328.31st Reverse4WD10.805 1.8 2.8982.1J Fuel T ankOne 75 gallon (283.9L) capacity tankJ Hydraulic SystemAll functions are hydraulically powered allowing positiveprecise, control.Main PumpsS One two section fixed displacement gear pump for thefront/rear winches and boom hoist/telescope circuits.S One single section fixed displacement gear pump for thesteering/swing/outriggers/service brake circuit.S Combined pump capacity of 93 gpm (352.0Lpm).Hydraulic Reservoir - 80 gal (303L) capacity equippedwith sight level gauge. Diffusers built in for deaeration.Filtration - Two 10 micron, full flow, line filter in the controlcircuit. All oil is filtered prior to return to sump tank. Accessible for easy filter replacement.J Pump DriveAll pumps are mechanically driven by the diesel engine.S Front /rear winches, boom hoist, and telescope pumpsare mounted to a mechanical pump disconnect on thetransmission torque convertor to aid in cold weather starting.65685 (supersedes 5671)-0614-E8 Axle Loads125 18612 50112 68511 44813 738 Cold weather starting aids - etherinjection6300630063 Pintle hook, front and rear2612136136136136 Pump disconnect2813632110632110 Power up/down winch with 450 ft(137.1m) wire rope - front361164-28-13389176402182-41-19 Winch roller - rear winch7634-14-690419342-17-8 Winch roller - front winch76361075347835-2-1 Remove 450 ft (137.1m) wire ropefrom rear winch-320-1458237-402-182-413-1879443 Remove 450 ft (137.1m) wire ropefrom front winch-320-1452110-340-154-352-1603315 Air conditioning in operator's cab21598361617981187852813 360° swing lock60272913311433152712 Emergency steer system5231212131Fly storage brackets to boombase section for fly options1406420091-60-27-55-251958825 ft (7.62m) fixed fly - stowed535243813369-278-126-259-117794360 27 ft (8.23m) offset fly - stowed1,0524771,701772-649-294-611-2771,663754 27-44 ft (8.23-13.41m) offset fly- stowed1,4756692,184991-710-322-656-2982,131967 Floodlight to boom base section4273-3-1-3-17330 ton (27.2mt) hook block tocarrier storage box670304943428-273-124-248-112918416 8.5 ton (7.7mt) hook block tocarrier storage box360163506230-146-66-133-60493225 Auxiliary lifting sheave713219782-126-57-124-561958820.5R25 (24-PR)16,125 lb (7 314kg)(1) Adjust gross vehicle weight and axle loading according to component weight.Note: All weights are ±3%.General DimensionsWall to wall over boom attachment Wall to wall over carrierCurb to curb Wall to wall over carrierWall to wall over boom attachment Not To ScaleC of Rotation Turning Radius - Front Wheel (4x2) Steering English Metric 35'10.67m 43' 1”13.13m Curb to curb 33' 2”10.11m Centerline of tire31' 8”9.64m Tail SwingEnglish Metric With counterweight 9' 11.5” 3.04m Without counterweightN/AN/ATurning Radius - All Wheel (4x4) Steering English Metric 20' 8” 6.31m 30' 2”9.20m 18' 9” 5.71m Centerline of tire 17' 1” 5.21mWorking Range DiagramWorking Range Diagram On Fully Extended OutriggersOperating Radius From Axis Of Rotation In Feet (Meters )H e i g h t I n F e e t (M e t e r s ) A b o v e G r o u n d(3.0)(6.1)(12.2)(15.2)(18.3)(21.3)(24.4)(27.4)(30.5)(9.1)(33.5)(39.6)(36.6)(42.7)150(45.7)140(42.7)130(39.6)120(36.6)110(33.5)100(30.5)90(27.4)80(24.4)70(21.3)60(18.3)50(15.2)40(12.2)30(9.1)20(6.1)10(3.0)0f Denotes Main Boom + 44' (13.4m) Offset Fly-Boom Mode “B”j Denotes Main Boom + 27' (8.2m) Offset Fly-Boom Mode “B”Boom Extend ModesBoom Mode “A” (A ïmax)Boom Mode “B” (Standard)Only inner mid section telescopes.Inner mid, outer mid, and tip sections telescope simultaneously.Base SectionTip Section 288” (7.57m) StrokeBoom Length 29' (8.8m)40' (12.2m)49.75' (15.2m)50' (15.2m)60' (18.3m)70' (21.3m)80' (24.4m)91.25' (27.8m)Outer Mid Section 288” (7.57m) StrokeInner Mid Section 288” (7.57m) StrokeBase SectionInner Mid Section 288” (7.57m) StrokeBoom Length 29' (8.8m)40' (12.2m)Main Boom Lift Capacity Charts - Standard29405060708091.25 1060,00050,10031,30010 1252,30047,60031,30025,00012 1543,00040,60031,30025,00025,00015 2031,20030,90027,60025,00025,00025,00019,00020 2524,30024,60024,20022,70021,40019,00025 3019,20019,50019,70019,10018,10016,80030 3515,50015,90016,10016,20015,50014,70035 4012,70012,90013,00013,00012,80040 4510,20010,40010,50010,60010,70045 508,6008,7008,8008,80050 557,1007,2007,3007,40055 606,1006,1006,20060 655,1005,2005,20065 704,4004,40070 753,7003,80075 803,20080 852,70085This information is not for crane operation. Operator must refer to the in-cab information for crane operation. Rated lifting capacities shown on fully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads.294050601032,80025,000101228,90028,600121524,30024,800152017,40018,10018,300202512,30012,60012,70025308,8009,2009,30030356,5006,9007,10035405,2005,40040454,0004,20045503,20050552,50055294050601031,90025,000101227,60025,000121522,70023,200152017,00017,50017,800202512,30012,60012,70025308,8009,2009,30030356,5006,9007,10035405,2005,40040454,0004,20045503,20050552,50055294050601024,00024,400101217,70018,200121512,00012,70015207,0007,7007,90020254,9005,2005,30025303,1003,4003,60030351,8002,2002,40035This information is not for crane operation. Operator must refer to the in-cab information for crane operation. Rated lifting capacities shown on fully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads.Fly Attachment Lift Capacity Charts - OptionalFully Extended Outriggers - 360° Rotation(All Capacities Are Listed In Pounds)3010,2003510,200409,800459,200508,400557,700606,900655,900705,100754,400803,800853,300902,900952,5001002,1001051,8001101,500This information is not for crane operation. Operator must refer to the in-cab information for crane operation. Rated lifting capacities shown on fully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads.Fully Extended Outriggers - 360° Rotation(All Capacities Are Listed In Pounds)274427442744 309,900357,200455,000359,7006,500406,800504,800409,3006,000456,400554,600458,6005,500506,1003,600604,5002,500 507,8005,100555,8003,400654,4002,400 557,2004,700605,5003,200704,3002,300 606,6004,400655,2003,100754,2002,300 655,6004,100705,0002,900804,0002,200 704,8003,800754,4002,800853,4002,200 754,1003,600803,8002,700902,9002,100 803,5003,400853,2002,500952,4002,100 853,0003,200902,8002,4001002,100 902,6002,800952,3002,4001052,100 952,2002,4001002,0002,3001101,800 1001,8002,0001051,6002,0001151,500 1051,5001,7001101,3001,7001101,4001151,400This information is not for crane operation. Operator must refer to the in-cab information for crane operation. Rated lifting capacities shown on fully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads.Main Boom Lift Capacity Charts - Optional (Metric)8.8412.218.321.324.427.812.530 0003327 22022 70014 150**33.523 90022 00014 150** 3.5422 20020 30014 150**11 30044.520 25018 60014 150**11 300 4.5517 90017 20014 150**11 30011 3005 614 40014 30012 700**11 30011 30011 3008 6006 711 90011 80011 30011 30010 95010 4008 6007 810 35010 50010 6009 8509 3008 450898 6008 7008 8008 8008 3507 7009107 1007 2507 3007 3507 3507 0501012 5 250 5 300 5 350 5 350 5 3501214 4 000 4 050 4 100 4 1001416 3 100 3 150 3 200 3 2001618 2 500 2 550 2 5501820 2 000 2 000 2 0502022 1 600 1 6502224 1 3002426 1 05026 This information is not for crane operation. Operator must refer to the in-cab information for crane operation. Rated lifting capacities shown on fully extended outriggers do not exceed 75% of the tipping loads and on tires do not exceed 65% of the tipping loads.8.8412.215.218.3315 05011 30033.513 50011 300 3.5412 25012 10044.511 15011 300 4.559 80010 000567 0507 3007 40067 5 300 5 600 5 700 5 75078 4 450 4 550 4 60089 3 600 3 700 3 750910 2 900 3 050 3 1001012 2 100 2 2001214 1 5501416 1 100168.8412.215.218.3314 65011 30033.513 00011 300 3.5411 60011 50044.510 45010 650 4.559 4509 650567 0507 3007 40067 5 300 5 600 5 700 5 75078 4 450 4 550 4 60089 3 600 3 700 3 750910 2 900 3 050 3 1001012 2 100 2 2001214 1 5501416 1 10016This information is not for crane operation. Operator must refer to the in-cab information for crane operation. Rated lifting capacities shown on fully extended outriggers do not exceed 75% of the tipping loads and on tires do not exceed 65% of the tipping loads.8.8412.215.218.339 6509 85033.57 4507 650 3.54 5 950 6 20044.5 4 850 5 100 4.55 4 050 4 30056 2 850 3 100 3 20067 2 050 2 300 2 400 2 45078 1 700 1 800 1 90089 1 250 1 400 1 450910900 1 050 1 10010 Fly Attachment Lift Capacity Charts - Optional (Metric)Fully Extended Outriggers - 360° Rotation(All Capacities Are Listed In Kilograms)9 4 60010 4 60012 4 45014 4 10016 3 50018 2 80020 2 30022 1 90024 1 55026 1 30028 1 050309003270034600This information is not for crane operation. Operator must refer to the in-cab information for crane operation. Rated lifting capacities shown on fully extended outriggers do not exceed 75% of the tipping loads and on tires do not exceed 65% of the tipping loads.17 5685 (supersedes 5671)-0614-E8Fully Extended Outriggers - 360° Rotation(All Capacities Are Listed In Kilograms)8.2313.418.2313.418.2313.419 4 50012 3 10014 2 25010 4 50014 2 85016 2 15012 4 250 2 75016 2 700 1 60018 2 050 1 15014 3 850 2 50018 2 500 1 50020 2 000 1 10016 3 350 2 25020 2 350 1 40022 1 950 1 05018 2 700 2 00022 1 950 1 30024 1 650 1 00020 2 200 1 85024 1 550 1 20026 1 350 1 00022 1 800 1 70026 1 300 1 15028 1 10095024 1 450 1 55028 1 050 1 1003095026 1 200 1 30030800 1 0003285028950 1 0503265080034650 30750850346003260070034550This information is not for crane operation. Operator must refer to the in-cab information for crane operation. Rated lifting capacities shown on fully extended outriggers do not exceed 75% of the tipping loads and on tires do not exceed 65% of the tipping loads.。
BTTZ与BTLY电缆性能的对比表
性能BTTZ矿物绝缘电缆BTLY系列矿物绝缘电缆耐火950℃受火180min950℃受火180min防水650℃燃烧加喷淋15min，电缆中间接头处不参加试验考核650℃燃烧加喷淋30min耐火耐冲击950℃燃烧每隔5min冲击一次，持续15min950℃燃烧每隔5min冲击一次，持续15min耐火耐冲击防水950℃火焰燃烧，每隔5min冲击一次，并施加750V的额定电压，持续3min，维持如上状态再加喷淋15min，电缆中间接头处不参加试验考核950℃火焰燃烧，每隔5min冲击一次，并施加1KV的额定电压，持续3min，维持如上状态再加喷淋15min中间接头BTTZ矿物绝缘电缆需要不断的使用中间接头，增加了成本，并且接头处不防火、不防水。
BTL系列矿物绝缘电缆采用金属管连续挤出工艺不需要使用中间接头。
截面35mm2截面以上均为单芯电缆。
举例：4×35 mm2的电缆需要分四次安装。
35mm2截面以上仍可采用多芯电缆交货。
举例：4×35 mm2的电缆同样只需要一次安装即可。
附件BTTZ矿物绝缘电缆所需要的中间接头和终端接头均需要另行向厂方采购并且价格昂贵。
厂方免费提供BTL系列矿物绝缘电缆在安装过程中所需要使用的附件。
运输大截面电缆长度较短，不能弯曲只能用大型运输车，运到现场完全可以参照普通的常规电缆放线施工现场放线不易，如果硬拉，会扭结及开裂。
整根无接头交货，与常规电缆没有区别施工硬度大、需专业的弯管工具，接头多，查找故障点困难。
施工工作量大BTLY电缆生产过程中采用的金属套连续挤包成型工艺使得单根电缆连续长度可满足客户的要求，从而做到整根无接头交货，简化安装工序芯数BTTZ电缆凡规格超过35mm2的均为单芯电缆，实际应用中多为单芯电缆组成回路，故容易在电缆固定金具中产生感应涡流，若涡流过大不仅会产生大量的涡流损耗还使电缆的固定金具老化速度加快。
240mm2及以下可以多芯电缆方式交货，可减少安装工序，压缩安装时间，有利于各芯电气参数的均衡。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
矿物质电缆技术条款
矿物绝缘电力电缆
一般要求
采用知名品牌。
采用标准
电缆的制造、试验和验收除了应满足本技术规格书的要求外，还应符合但不限于如下标准：GB/T19001-2000 ISO9001：2000 《国家质量标准》
GB/T-24001 ISO14001：1996 《国家环境标准》
GB/T19022.1-1994 《国家计量标准》
GB/T 12706.1-2008 额定电压1kV（Um =1.2kV）到35kV（Um =40.5kV）挤包绝缘电力电缆及附件第1部分：额定电压1kV（Um= 1.2kV）和3kV（Um=3.6kV）电缆
BS6387-1994 《电线电缆燃烧温度试验方法》
GB/T19666－2005 《阻燃和耐火电线电缆通则》
GB/T18380.3、 IEC60332 《成束燃烧实验标准》
GB/T3048-2007 《电线电缆电性能试验方法》
GB/T3956-2008 《电缆的导体》
GB/T19216-2003 《电线电缆缆耐火特性试验方法》
GB50217-2007 《电力工程电缆设计规范》
GB50016－2006 《建筑设计防火规范》
JB/T6037-1992 《工程机械电线电缆的识别标志通则》
GB/Tl7650.1-1998 《取自电缆或光缆的材料燃烧时释出气体的试验方法第一部分卤酸气体量的测量》
GB/T 17650.2-1998 《取自电缆或光缆的材料燃烧时释出气体的试验方法用测量pH 值和电导率来测定气体的酸度》
GB/T 17651.2-1998 《电缆或光缆在特定条件下燃烧的烟密度测定第2部分：试验步骤和要求》
GB/T 18380.3-2000 《电缆在火焰条件下的燃烧试验成束电线或电缆的燃烧试验方法》GB/T 19216.21-2003 《在火焰条件下电缆或光缆的线路完整性试验第21部分：试验步骤和要求—额定电压0.6/1kV及以下电缆》
JB/T 8137-1999 《电线电缆交货盘》
企业必须按ISO9000系列标准组织生产，对产品生产过程进行严格的质量控制。
使用条件
运行条件
系统标称电压U0/U 0.6/1kV
系统最高运行电压Um 1.2kV
系统频率 50Hz
运行要求
电缆导体的额定运行温度 90℃
短路时电缆导体的最高温度 250℃
短路时间不超过5s
电缆弯曲半径
运行环境条件
海拔高度：≤1000m
环境温度－10℃～＋50℃
相对湿度≤90%
敷设条件
敷设环境有直埋、沟槽、桥架、竖井、电缆沟、医院、学校、商场、娱乐场所、数据中心、轨道交通、等多种方式敷设，敷设时最低环境温度在0℃。
技术要求
导体
导体采用优质无氧圆铜丝绞合压制而成，其性能和外观符合GB/T3956的规定。
导体表面光洁、无油污、无损伤绝缘的毛刺、锐边,无凸起或断裂的单线。
矿物绝缘
绝缘采用单面金云母带，云母包带的厚度应符合国家相关标准，云母带绕包时的重叠率及材质应确保电缆耐火性能达到相关标准规定要求。
金属管
金属管采用连续挤出无缝铝管，金属管具有防水接地线等功能，金属管的导体电阻优于标准规定的接地线电阻要求。
隔离套
隔离套采用90℃交联聚乙烯料，隔离套具有防水、分相等功能。
成缆
单芯电缆无需成缆，多线电缆需成缆，成缆方向为右向，成缆节距应符合标准GB/T12706-2008规定。
隔氧层
隔氧层采用无机矿物质材料，在火焰下可以抑制电缆线芯温度快速升高。
耐火层
耐火层采用无机矿物质材料，火灾条件下具有隔热功能。
外护套
护套采用90℃无卤低烟护套料，表面光洁、圆整,其标称厚度和性能符合IEC60502、GB12706.3、GB12666的规定，任一点最小厚度不小于标称值的85%减去0.2mm。
外护套表面紧密，其横断面无肉眼可见的砂眼、杂质和气泡以及未塑化好和焦化等现象。
电缆标志
电缆绝缘线芯识别标志应符合GB6995的规定。
成品电缆的护套上有制造厂名、产品型号、额定电压和自然数字计米的连续标志，前后两个完整连续标志间的距离小于550mm，标志字迹清楚,容易辨认、耐擦。
电缆性能综述
上述要求仅是对电缆提出的基本要求，供应厂家应以确保电缆达到950℃，3小时耐火要求及低烟(透光率达70%以上)、无卤为准则，以成熟的工艺和合理的结构保证电缆的综合优越性能。
试验
电缆在制造、处理、试验、检验过程中，买方有权监造和见证，卖方不得拒绝，买方的此行为不免除供方对产品质量的责任。
在出厂和抽样试验前30天,卖方通知买方见证,买方应在10天内予以答复,如买方放弃见证,则卖方把所做的试验以试验报告的形式提交给买方。
出厂试验
每批电缆出厂前,按本技术规范要求进行出厂试验。
出厂试验报告除附在电缆盘上以外，并送三份原件给买方。
导体直流电阻试验
导体直流电阻试验在每一电缆所有导体上进行测量，符合GB/T3966的规定。
交流电压试验
按GB12706.1的相关规定施加工频电压3.5kV，时间为5分钟，不发生击穿。
阻燃试验
按GB/T18380.3的相关规定通过阻燃试验。
耐火试验
按BS6387:1994的相关固定通过耐火试验。
烟密度试验
按GB/T17661.2规定的烟密度试验，透光率不应小于70%。
卤素含量试验
按GB/T17660.2规定的燃烧气体的腐蚀性试验，pH值不小于4.3,电导率不大于10μ
S/mm。
防水防潮试验
电缆具有防水、防潮性能，并应符合国家相关标准。
型式试验
供方提供的产品系列均已通过国家相关质量检测部门的型式试验和主管部门的产品鉴定。
交货
在电缆最大交货长度的范围内根据业主提供的任何长度的电缆盘交货。
长度计量误差应不超过±0.5%。
交货前提交一份允许弯曲半径，导体直流电阻等电气性能参数。
电缆的交货长度不小于1000mm。
允许根据双方协议长度交货。
包装储运
产品由供方的检查部门检查合格后方可出厂，每个出厂的包装件上附有产品质量合格证和质
保书，产品试验报告和安装使用说明书。
电缆包装在符合GB4005规定的电缆盘上交货，电缆盘能经受所有在运输、现场搬运中可能遭受的外力作用。
电缆盘能承受在安装或处理电缆时可能遭受的外力作用并不会损伤电缆及盘本身。
电缆端头可靠密封。
每一交货盘上将标明：厂名或商标、电缆型号及规格、长度、毛重、正确旋转方向及制造年月和标准编号。