Phoenix安装使用手册_详细版

合集下载

PhoenixTool图文教程

PhoenixTool图文教程

PhoenixTool图文教程现在有很多新来的同学总是不知道修改工具怎么使用,其实很简单,在这里做了一个简单的图文教程,希望各位能看得懂!第一次做教程,望老大们手下留情,有什么说错的地方,望各位老大指点!此教程很多地方仅适合华硕的主板,对于其他的品牌的主板,还请查阅更详细的教程!本教程同样对AMITool162 及AwardTool152 也适用,只是稍微有点不同而已,可供参考,详细教程还请查阅站内其他老大们编写的!特别提醒:刷新BIOS前请一定要备份主板的初始BIOS,以防不测!修改BIOS有风险,请慎重,如出现任何事故,本教程及本站均不负任何责任!1:打开我们下载的BIOS文件。

2:软件处理BIOS过程,感觉 1.91比1.90时间长多了,请耐心等待!3:软件提示:如果修改的刷新失败,可以下载官方的BIOS文件,改成对应的文件名,存入U盘(不需要启动U盘),启动电脑按Ctrl+Home强制刷新。

4:证明我们从官方下载的BIOS文件含有SLIC2.0模块,当然这个是没用的!5:选择制造商,很多朋友以为是我们需要改成的OEM品牌,其实不是,这个是主板的制造商,这里不要搞错了!6:我们购买的是华硕的主板,自然,这里应该选择华硕。

7:选择我们需要修改的OEM品牌,我们选择的联想。

8:如果希望同时激活OEMXP系统,选择打开SLP文件。

9:我们选择了联想的OEMXP激活。

10:很多朋友不知道怎么弄这个rw文件,对于华硕的主板,新的191软件已经不需要自己提取rw文件,我们新建一个空白的文本文档,改成 *.rw,就可以了!11:修改好后的rw文件,记得 *.rw ,最好用小写字母,有一次我自己修改,大写的曾经出错过,改成小写的就好了,不知道是不是偶然,不过改个小写,也没什么不方便的!12:点击选择我们刚刚修改好的rw文件。

13:14:选择好的SLIC,SLP和rw文件,至于证书验证,可以略过,修改完BIOS,再用工具打开修改好的BIOS文件,检测一下你的证书跟SLIC表是不是匹配。

Phoenix安装使用手册_详细版

Phoenix安装使用手册_详细版

Phoenix安装与使用文档作者:宋亚飞2015年3月27日目录Phoenix安装与使用文档 (1)目录 (1)描述 (2)Phoenix安装 (2)1、下载Phoenix (2)2、上传压缩包 (3)3、解压缩文件 (3)4、配置Phoenix (3)5、修改权限 (3)6、验证是否成功 (4)Phoenix使用 (4)1、建表 (4)2、导入数据 (5)3、查询数据 (5)查询1、查询全部记录 (5)查询2、查询记录总条数 (5)查询3、查询结果分组排序 (6)查询4、求平均值 (6)查询5、多字段分组,排序,别名。

(6)查询6、查询日期类型字段 (6)查询7、字符串,日期类型转换 (7)4、Phoenix基本shell命令 (7)5、用Phoenix Java api操作HBase (8)Phoenix支持 (11)描述现有hbase的查询工具有很多如:Hive,Tez,Impala,Shark/Spark,Phoenix等。

今天主要记录Phoenix。

phoenix,中文译为“凤凰”,很美的名字。

Phoenix是由开源的一个项目,后又捐给了Apache基金会。

它相当于一个Java中间件,提供jdbc连接,操作hbase数据表。

但是在生产环境中,不可以用在OLTP中。

在线事务处理的环境中,需要低延迟,而Phoenix在查询HBase时,虽然做了一些优化,但延迟还是不小。

所以依然是用在OLAT中,再将结果返回存储下来。

Phoenix官网上,对Phoenix讲解已经很详细了。

如果英语好,可以看官网,更正式一些。

Phoenix安装1、下载Phoenix下载地址:/apache/phoenix/phoenix与HBase版本对应关系Phoenix 2.x - HBase 0.94.xPhoenix 3.x - HBase 0.94.xPhoenix 4.x - HBase 0.98.1+我目前测试使用版本概况:Hadoop2.2.0--HBase0.98.2所以我可以用phoenix4.x。

Phoenix_BIOS设置详解

Phoenix_BIOS设置详解

Phoenix BIOSPhoenix BIOS,是BIOS类型中的一种,多用于高档的原装品牌机和笔记本电脑上,其画面简洁,便于操作。

正由于其多用于品牌机或笔记本电脑上。

几乎所有的主板所附Phoenix-Award BIOS 都包含了CMO S SETUP 程序,以供用户自行依照需求,设定不同的数据,使计算机正常工作,或执行特定的功能。

CMOS SETUP会将各项数据储存于主机板上内建的CMOS SRAM中,当电源关闭时,则由主板上的锂电池继续供应CMOS SRAM所需电力。

当再次开启电源时,BIOS 开始进行POST(Power On Self Test开机自我测试)时,按下<Del>键便可进入Award BIOS 的CM OS SETUP 主画面中。

当您进入BIOS CMOS设置程序的时候,显示的第一个画面是主菜单,该主菜单提供几个不同的设置功能可用选项与两个退出程序可用选项,请使用键盘的上下键选择不同的项目,并按Enter键进入各功能可用选项功能的次级菜单中。

请注意,当您移动到每个功能可用选项时,该项的文字会变亮,在屏幕下方亦会出现简单的说明文字,向您介绍该项的作用。

操作按键说明↑ 移到上一个项目↓ 移到下一个项目← 移到左边的项目→ 移到右边的项目<Enter > 确定可用选项Esc 退回上一级菜单,或从主菜单中结束SETUP 程序Page Up/+ 改变设定状态,或增加字段中之数值内容Page Down/- 改变设定状态,或减少字段中之数值内容F1 显示所有功能键的相关说明F2 可显示目前设定项目的相关说明F3 功能保留F4 功能保留F5 可加载该画面原先所有项目设定(但不适用主画面)F6 可加载该画面之优化(Optimized)预设设定(但不适用主画面)F7 可加载该画面之标准(Standard)预设设定(但不适用主画面)F8 功能保留F9 功能保留F10 储存设定并离开CMOS SETUP 程序主菜单设置当您进入BIOS CMOS设置程序的时候,显示的第一个画面是主菜单,该主菜单提供几个不同的设置功能可用选项与两个退出程序可用选项,请使用键盘的上下键选择不同的项目,并按下键进入各功能可用选项功能的次级菜单中。

Phoenix-Award BIOS v02.63 设置 中文说明书

Phoenix-Award BIOS v02.63  设置 中文说明书

Phoenix-Award BIOS v02.63 设置中文说明书3.1 BIOS简介Phoenix-Award BIOS包含了CMOS SETUP程序,以供用户自行依照需求,设定不同的数据,使计算机正常工作,或执行特定的功能.CMOS SETUP会将各项数据储存于主机板上内建的CMOS SRAM中,当电源关闭时,则由主板上的锂电池继续供应CMOS SRAM所需电力.当再次开启电源时, BIOS 开始进行POST(Power On Self Test开机自我测试)时,按下键便可进入Award BIOS 的CMOS SETUP 主画面中. 当您进入BIOS CMOS设置程序的时候,显示的第一个画面是主菜单,该主菜单提供几个不同的设置功能可用选项与两个退出程序可用选项,请使用键盘的上下键选择不同的项目,并按下键进入各功能可用选项功能的次级菜单中.请注意,当您移动到每个功能可用选项时,该项的文字会变亮,在屏幕下方亦会出现简单的说明文字,向您介绍该项的作用.操作按键说明↑ 移到上一个项目↓ 移到下一个项目← 移到左边的项目→ 移到右边的项目Enter 确定可用选项Esc 退回上一级菜单,或从主菜单中结束SETUP 程序Page Up/+ 改变设定状态,或增加字段中之数值内容Page Down/- 改变设定状态,或减少字段中之数值内容F1 显示所有功能键的相关说明F2 可显示目前设定项目的相关说明F3 功能保留F4 功能保留F5 可加载该画面原先所有项目设定(但不适用主画面) F6 可加载该画面之优化(Optimized)预设设定(但不适用主画面) F7 可加载该画面之标准(Standard)预设设定(但不适用主画面) F8 功能保留F9 功能保留F10 储存设定并离开CMOS SETUP 程序UNIKA UR785GT主板中文手册主菜单Phoenix –Award Workstation BIOS CMOS Setup Utility > Standard CMOS Features > Advanced BIOS Features > Advanced Chipset Features > Integrated Peripherals > Power Management Setup > Miscellaneous Control > PC Health Status ↑↓→←:Move Enter:Select F5:Previous Values > Thermal Throttling Option > Spirit OverClocking Settings > BIOS Security Features Load optimized Defaults Load Fail-Safe Defaults Save & Exit Setup Exit Without Saving +/-/:Value F10:Save ESC:Exit F1:General Help F6: Optimized Defaults F7:Standard Defaultsv02.63 (C)Copyright 1985-2008, American Megatrends,Inc.当您进入BIOS CMOS设置程序的时候,显示的第一个画面是主菜单,该主菜单提供几个不同的设置功能可用选项与两个退出程序可用选项,请使用键盘的上下键选择不同的项目,并按下键进入各功能可用选项功能的次级菜单中. 请注意,当您移动到每个功能可用选项时,该项的文字会变亮,在屏幕下方亦会出现简单的说明文字,向您介绍该项的作用. 注意:在可用选项前带有">"的可用选项表示带有子项目,可按压"Enter"进入进行设置.在可用选项前带有"x"的可用选项表示该项与其它可用选项有关联,不能进行独立的设定,必须在某一条件下才可以进行设置.3.1.2 Standard CMOS Features(标准CMOS参数设置)Phoenix –Award Workstation BIOSCMOS Setup Utility Standard COMS Features Language English Help Item Date (mm:dd:yy) Wed 07/22/2009 Select the current Time (hh:mm:ss) 10 : 43 : 36 default language used by the BIOS Primary IDE Master Maxtor 6L160M0 Primary IDE Slave None SATA Channel 5 None SATA Channel 6 None SATA Channel 1 None SATA Channel 2 None SATA Channel 3 None SATAChannel 4 None Drive A System Memory Size : 1792MB ↑↓→←:Move Enter: Select F5:Previous Values [1.44, 3.5in.]> > > > > > > >+/-/:Value F10:Save ESC:Exit F1:General Help F6: Optimized Defaults F7:Standard Defaults该部分为使用者设置系统日期,时间,软/硬盘参,以及系统安全功能.Date (mm:dd:yy)(设置日期) 日期的格式分别为,,,请按键设置日历. Time hh:mm:ss(设置时间) 时间是以时/分/秒的格式显示,用以设置现在时刻. > Primary IDE Master/Slave/SATA Channel 1/2/3/4/5/6(第0/1 IDE端口主/从SATA 1/2/3/4/5/6硬盘) 该硬盘相关参数设置,请按键进入查看.Phoenix –Award Workstation BIOSCMOS Setup Utility Primary IDE Master Primary IDE Master Help Item Device :Not Detected Select the type of device connected Type Auto to the system. LBA/Large Mode Auto Auto Block (Multi-Sector Transfer) Auto PIO Mode Auto DMA Mode Auto S.M.A.R.T. 32Bit Data Transfer Disabled ↑↓→←:Move Enter: Select F5:Previous Values+/-/:Value F10:Save ESC:Exit F1:General Help F6: Optimized Defaults F7:Standard DefaultsDrive A(软盘驱动器类型) 该项允许您选择安装的软盘驱动器类型. 可用选项: None(无), 360K(5.25英吋), 1.2M(5.25英吋), 720K(3.5英吋), 1.44M(3.5英吋), 2.88M(3.5英吋). System Memory(总内存) 该项是用来显示您的内存状态(只读, 不可更改). S.M.A.R.T.(硬盘自我监控分析回报功能) 所谓的硬盘S.M.A.R.T. 功能,其实就是硬盘的"自我监控分析并回报功能" (Self MontorngAnalyssand ReportngTechnology).此功能可以使您的计算机在某些状况之下,能够预知储存装置即将产生故障或中断现象. 可用选项:Disabled (默认值),Enabled.Advanced BIOS Features(高级BIOS设置)Phoenix –Award Workstation BIOSCMOS Setup Utility Advanced BIOS Features Advanced Settings Help Item CPU Configuration Press Enter Menu Level Hard Disk Drives Press Enter Quick Boot Enabled 1st Boot Device SATA:6L160M0 BootUp Num-Lock ON ACPI APIC Support Enabled MPS Revision 1.4↑↓→←:Move Enter: Select F5:Previous Values高级BIOS设置可对系统的高级特性进行设定. > CPU Feature(CPU特性设置) 此项用于设置CPU相关参数,请按键进入查看.↑↓→←:Move Enter: Select F5:Previous ValuesSecure Virtual Machine Mode(安全虚拟机) 此选项用于启用或停用CPU安全虚拟机功能. 可用选项:Enabled, Disabled(默认值). AMD K8 Cool Quiet Control(CPU 风扇宁静运转控制) 此选项可以打开或关闭CPU风扇宁静运转控制功能,如果打开,CPU风扇会在空闲时自动降低转速, 以降低噪音. 可用选项: Auto, Disabled(默认值).+/-/: Value F10:Save ESC: Exit F1:General Help F6: Optimized Defaults F7:Standard DefaultsPhoenix –Award Workstation BIOS CMOS Setup Utility CPU Configuration CPU Configuration Help Item Module Version: 14.08 AGESA Version: 6.0.9.0 This option should Physical Count: 1 remain disabled for Logical Count: 3 the normal operation. AMD Phenom(tm+) II X3 720 Processor the driver developer Revision: C2may enable it for Cache L1: 384KB testing purpose. Cache L2: 1536KB Cache L3: 6MB Speed: 2800MHz, NB Clk: 2000MHz Able to Change Freq: Yes uCode Patch Level: 0x1000086 GART Error Reporting Disabled Microcode Update Enabled Secure Virtual Machine Mode Enabled Cool Quiet Enabled C1E Support Disabled+/-/: Value F10:Save ESC: Exit F1:General Help F6: Optimized Defaults F7:Standard Defaults> Hard Disk Boot Priority (硬盘开机顺序) 此项用于设置您的硬盘开机顺序.Phoenix – Award Workstation BIOS CMOS Setup Utility Hard Disk Drives Hard Disk Drives Help Item 1st Drive Maxtor 6L160M0 Specifies the boot Sequence from the available devices↑↓→←: Move Enter: Select F5: Previous Values+/-/: Value F10: Save ESC: Exit F1: General Help F6: Optimized Defaults F7:Standard DefaultsQuick Power On Self Test(电源开启后快速自我测试) 此项用于加速开机自我测试(POST) 的功能.如果设定为启用(Enable)时,BIOS将会缩短并精简开机自我测试的项目及过程. 可用选项:Enabled (默认值),Disabled. 1st Boot Device(第一优先开机装置) 此项用于设定引导时BIOS 系统自外部设备加载操作系统的优先级. Boot Up NumLock Status(开机时NumLock状态) 此项用于选择NumLock 键在系统启动后的状态. 可用选项: On (默认值) 开机后数字键盘设定在数字输入模式Off 开机后数字键盘设定在方向键盘模式. APIC Mode(高级可编程中断控制模式) 此项用于设置高级可编程中断控制的模式. 可用选项:Enabled (默认值),Disabled. MPS Version Control For OS(系统MPS版本控制) 此项用于设定操作系统下多处理器的运行版本. 可用选项:1.4 (默认值),1.1.Advanced Chipset Features(高级芯片组参数设置)Phoenix –Award Workstation BIOS CMOS Setup Utility Advanced Chipset Features Memory Configuration Press Enter Help Item Internal Graphics Configuration Press Enter PCI Express Configuration Press Enter Menu Level HDMI Audio HDMI NB Power Management Features Auto Primary Video Controller PCI-GFX0-GPP-IGFX ↑↓→←: Move Enter: Select F5:Previous Values> DRAM Configuration(内存时序设置)Phoenix – Award Workstation BIOS CMOS Setup Utility DRAM Configuration DRAM Timing Mode Auto Help Item Memory CLK : 667 MHz, N/A CAS Latency(Tcl) : 11 CLK, N/A Options RAS/CAS Delay(Trcd) : 9 CLK, N/A Row Recharge Time(Trp) : 9 CLK, N/A Auto Min Active RAS(Tras) : 24 CLK, N/A DCT 0 RAS/RAS Delay(Trrd) : 4 CLK, N/A DCT 1 Row Cycle(Trc) : 33 CLK, N/A Both Write Recover Time(Twr) : 10 CLK, N/A Bank Interleaving Channel Interleaving Enable Clock to All DIMMs MemClk Tristate C3/ATLVID Memory Hole Remapping DCT Unganged Mode Power Down Enable Auto XOR of Address bits Disabled Enabled Always Channel↑↓→←:Move Enter: Select F5:Previous ValuesDRAM Timing Mode(调节内存时序) 此项用于设置内存运行模式.建议使用默认值. 可用选项:Disabled, Enabled (默认值). DRAM tCL(内存延迟周期) 此项用于设置内存延迟周期.当DRAM Tmng Selectable设定为Manual时,此项目才会被开启. 可用选项:Auto,3,4,5,6,7,8,9. DRAM tRCD(内存RAS to CAS延迟时间) 此项用于设置内存送出激活命令和实际读,写命令的周期时间.当DRAM Tmng Selectable设定为Manual时,此项目才会被开启. 可用选项:Auto,3,4,5,6,7,8,9.▲▲▲+/-/:Value F10:Save ESC:Exit F1:General Help F6: Optimized Defaults F7:Standard Defaults+/-/:Value F10:Save ESC:Exit F1:General Help F6: Optimized Defaults F7:Standard DefaultsDRAM tRP(内存预充电) 此项用于设定当内存送出预备充电命令后,多少时钟周期后可再送出下一次命令.当System Performance时序选择设定为Manual时,此项目才会被开启. 可用选项:Auto,3,4,5,6,7,8,9. DRAM tRAS(内存时钟周期) 此项用于设置内存时钟周期.当DRAM Tmng Selectable时序选择设定为Manual时,此项目才会被开启. 可用选项:Auto,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23. > Internal Graphics Configuration(板载显卡设置)Phoenix –Award Workstation BIOS CMOS Setup Utility Internal Graphics Configuration Internal Graphics Configuration Help Item UMA+SidePort Auto 667MHz Disabled 700 Auto Above 4G Disabled UMA SIDEPORT UMA+SIDEPORT Options Internal Graphics Mode UMA Frame Buffer Size SIDEPORT Clock Speed GFX Engine Clock Override IGX Engine CLock UMA-SP Interleave Mode Surround View FB Location ↑↓→←:Move Enter: Select F5:Previous Values+/-/:Value F10:Save ESC: Exit F1:General Help F6: Optimized Defaults F7:Standard DefaultsInternal Graphics Mode(选择内部视频模式) 可用选项: UMA+SdePort(系统内存+板载显存),UMA(系统内存),SdePort(板载显存),Dsabled.. UMA Frame BufferSize(显存容量) 用于选择可供显卡直接读取的总的系统内存容量. 可用选项:Auto(默认值),32MB,64MB,128MB,256MB,512MB. SIDEPORT Clock Speed(显存容量) 用于调节板载显存的频率. 可用选项:200MHz,266MHz,333MHz,400MHz,533MHz,667MHz. IGX Engine Clock Override(开启显示核心频率调节) 可用选项:Enabled, Disabled(默认值). IGX Engine CLock(显示核心频率) 用于调节显示核心的频率. 可用选项:150MHz - 999MHz逐Mhz调节,700MHz(默认值). FB Location(帧缓冲地址) 可用选项:Below 4G,Above 4G.> PCI Express Configuration(PCIE总线设置)Phoenix –Award Workstation BIOS CMOS Setup Utility PCI Express Configuration GPP Slots Power Limit, W 25 Help Item Port #02 Features Press Enter Options Port #04 Features Press Enter NB-SB Port Features Press Enter Auto Enable Disabled↑↓→←:Move Enter: Select F5:Previous Values> Prot #2-#04(PCIE x16总线设置)Phoenix –Award Workstation BIOSCMOS Setup Utility Port @02 Features High Speed Mode Auto Help Item ASPM Disabled Width Auto "Auto" - RC only Power Limit,W 75 advertize Gen2 capability↑↓→←:Move Enter: Select F5:Previous ValuesGen2 High Speed Mode(PCIE2.0 高速模式) 该项可开启PCIE2.0高速模式,只有使用PCIE2.0显卡时才可实现. 可用选项:Auto(默认值),Disabled. Link ASPM(PCIE 插槽BUS的电源管理) 可用选项:Enabled, Disabled(默认值). Link Width(PCIE 插槽BUS的带宽) 可用选项:Auto(默认值),x1,x2,x4,x8,x16.▲▲▲+/-/:Value F10:Save ESC: Exit F1:General Help F6: Optimized Defaults F7:Standard DefaultsGen2 Link Slot+/-/:Value F10:Save ESC: Exit F1:General Help F6: Optimized Defaults F7:Standard Defaults- 18 -UNIKA UR785GT主板中文手册> NB-SB Port FeaturesPhoenix – Award Workstation BIOS CMOS Setup Utility NB-SB Port Features Link ASPM Disabled Item Help VC1 Traffic Support Enabled Link Width Auto Menu Level▲↑↓→←:Move Enter: Select F5:Previous Values+/-/PU/PD: Value F10: Save ESC: Exit F1:General Help F6: Fail-Safe Defaults F7: Optimized DefaultsLink ASPM(北桥到南桥之间BUS的电源管理) 可用选项:Enabled, Disabled(默认值). VC1 Traffic Support(虚拟通道1传输支持) 可用选项:Enabled, Disabled(默认值). Link Width(PCIE 插槽BUS的带宽) 可用选项:Auto(默认值),x1,x2,x4. HDMI Audio(HDMI音频输出) 此选项用于设置HDMI音频输出. 可用选项:Auto, Disabled(默认值). Primary Video Controller(初始化显示卡设置) 此项用来设置显示卡初始化的优先顺序. 可用选项:PCI Slot(默认值),GFX0,GPP,IGFX.3.1.5 Integrated Peripherals(外围设备参数设置)Phoenix – Award Workstation BIOS CMOS Setup Utility Integrated Peripherals Onboard SATA Function Press Enter Help Item Onboard Device Function Press Enter SuperIO Configuration Press Enter↑↓→←:Move Enter: Select F5:Previous Values▲▲▲+/-/:Value F10:Save ESC: Exit F1:General Help F6: Optimized Defaults F7:Standard Defaults- 19 -UNIKA UR785GT主板中文手册> Onboard SATA Device(主板IDE参数设置) 将光标移到本项并按键,便可以进入本项的子选单,并看到下列的功能设定.Phoenix – Award Workstation BIOS CMOS Setup Utility OnChip IDE Device OnChip SATA Channel Enabled Item Help OnChip SATA Type Native IDE SATA IDE Combined Mode Enabled Options PATA Channel Config SA TA as secondary Disabled Onboard PCI IDE Controller Both Enabled Hard Disk Write Protect Disabled IDE Detect Time Out (Sec) 35 ATA(PI) 80Pin Cable Detect Host & Device↑↓→←:Move Enter: Select F5:Previous Values+/-/:Value F10:Save ESC: Exit F1:General Help F6: Optimized Defaults F7:Standard DefaultsOn-Chip IDE Channel(主/副IDE通道控制) 主板IDE控制器拥有两个通道,可连接2个IDE设备.您可根据您的需求设定使用一个或两个IDE通道(默认状态为两个IDE通道呈开启状态). 可用选项:Enabled(默认值), Disabled. OnChip SATA Type(SATA接口运行模式) 该项可控制SATA接口的组合运行模式,可选择普通IDE 模式,RAID模式,NCQ模式. 可用选项:Native IDE(默认值),RAID, Legacy IDE,IDE - AHCI. > Onboard Device Control(主板板载设备参数设置)Phoenix –Award Workstation BIOS CMOS Setup Utility Onboard Device Control Onboard PCILAN Enabled Item Help Onboard LAN BootROM Disabled HD Audio Azalia Device Enabled Menu Level Azalia Front Panel Auto USB Configuration Press Enter▲↑↓→←:Move Enter: Select F5:Previous ValuesOnboard PCILAN(板载网络控制器功能) 该项可以开启或关闭板载的网络控制器. 可用选项:Enabled(默认值),Dsabled. Onboard LAN BootROM(板载网络控制器引导模块) 此项用于开启或关闭板载网络控制器的引导模块,打开时可实现网络无盘引导,如使用本地设备引导时请关闭此项. 可用选项:Dsabled(默认值),Enabled. HD Audio Azalia Device(板载声卡) 该项可开启或关闭板载声卡. 可用选项:Auto(默认值),Dsabled.▲+/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F6: Fail-Safe Defaults F7: Optimized Defaults- 20 -UNIKA UR785GT主板中文手册> USB Configuration(主板板载设备参数设置)Phoenix –Award Workstation BIOS CMOS Setup Utility USB Configuration USB Configuration Help Item USB Devices Enabled: Enables support for None legacy USB. AUTO option Disables Legacy USB Support Enabled legacy support if USB 2.0 Controller Mode HiSpeed no USB devices are BIOS EHCI Hand-Off Enabled connected. OHCI HC(Bus 0 Dev 18 Fn 0) Enabled OHCI HC(Bus 0 Dev 18 Fn 1) Enabled OHCI HC(Bus 0 Dev 18 Fn 2) Enabled OHCI HC(Bus 0 Dev 19 Fn 0) Enabled OHCI HC(Bus 0 Dev 19 Fn 1) Enabled OHCI HC(Bus 0 Dev 19 Fn 2) Enabled OHCI HC(Bus 0 Dev 20 Fn 5) Enabled ↑↓→←:Move Enter: Select F5:Previous Values +/-/:Value F10:Save ESC:Exit F1:General Help F6: Optimized Defaults F7:Standard DefaultsOnChip USB Controller(板载USB设置) 该项可以设置开启或关闭板载USB 控制器.建议保留默认值. 可用选项:Enabled(默认值),Dsabled. USB EHCI Controller(板载USB EHCI控制器) 该项用来设置开启或停用USB EHCI控制器. 可用选项:Enabled(默认值),Dsabled. > SuperIO Configuration(主板输入输出参数设置) 将光标移到本项并按键,便可以进入本项的子选单,并看到下列的功能设定.Phoenix – Award Workstation BIOSCMOS Setup Utility SuperIO Configuration Configure F71863 Super IO Chipset Help Item Onboard Floppy Controller Enabled Allows BIOS to Enable Serial Port1 Address 3F8/IRQ4 or Disable Floppy IrDA Mode Select IrDA(1.6us) Controller. IrDA Duplex Mode Half↑↓→←:Move Enter: Select F5:Previous Values+/-/:Value F10:Save ESC:Exit F1:General Help F6: Optimized Defaults F7:Standard DefaultsOnboard Floppy Controller(软驱控制器) 该项为选择主板内建软磁盘控制端口选择(FDC Floppy Dsk Controller);该项均为开启状态,否则无法控制软盘驱动器. 可用选项:Enabled(默认值),Dsabled. Serial Port1 Address(串行端口1功能) 此项用于设置内建串行端口COM1的中断及I/O地址设置. 可用选项:Dsabled,3F8/IRQ4,2F8/IRQ,3E8/IRQ4,2E8/IRQ3,Auto.- 21 -UNIKA UR785GT主板中文手册3.1.6 Power Management Features(电源管理)电源管理设置可设置计算机电源管理功能,有效减低个人计算机系统电源消耗.若要完全发挥管理功能,则需正确设置选择,加上硬件外设配合.Phoenix –Award Workstation BIOSCMOS Setup Utility Power Management Features Power Management Features Help Item Power Management/APM Enabled Enabled/Disable SMI Suspend Time Out Disabled based power management Power Button Mode On/Off and APM support. Video Power Down Mode Suspend Hard Disk Power Down Mode Suspend Hard Disk Time Out (Minute) Disabled RTC Alarm Resume Disabled↑↓→←:Move Enter: Select F5:Previous Values+/-/:Value F10:Save ESC:Exit F1:General Help F6: Optimized Defaults F7:Standard DefaultsPower Management Option(电源管理功能选择) 此选单用于选择省电类型(或程度),且和下列模式有直接的关连: 可用选项:Mn. Savng, Max. Savng, User Defined(默认值). RTC Alarm Resume(定时开机设置) 该项设置系统定时开机,可设定每月某一天某一时刻或每天某一时刻开机. 可用选项:Enabled,Dsabled(默认值). xDate of Month Alarm(日期设定) 您可设定每月定时开机的日期. x Time(hh:mm:ss) Alarm(时间设定) 您可设定每天定时机的时间.- 22 -UNIKA UR785GT主板中文手册3.1.7 Miscellaneous Control(特殊控制)Phoenix – Award Workstation BIOSCMOS Setup Utility Miscellaneous Control Advanced PCI/Pnp Settings Help Item Clear NVRAM Clear NVRAM during Plug & PLay O/S System Boot. PCI Latency Timer Allocate IRQ to PCI VGA Palette Snooping PCI IDE BusMaster OffBoard PCI/ISA IDE Card IRQ Resouces▲↑↓→←:Move Enter: Select F5:Previous Values+/-/:Value F10:Save ESC:Exit F1:General Help F6: Optimized Defaults F7:Standard DefaultsPCI/VGA Palette Snoop(VGA监控) 此项用于监控VGA调色盘的状态,在使用早期的一些视频卡时,会发生颜色偏差或异常反白的情形,此时就必须成Enabled,以改善这种现象.现在已经很少使用,请维持Dsabled默认值设置. 可用选项:Enabled,Dsabled(默认值). Maximum Payload Size(PCI Express总线净载荷尺寸) 该项可以设置PCI Express总线的净载荷尺寸,建议保留默认值. 可用选项:128,256,512,1024,2048,4096. x IRQ Resources(系统IRQ资源控制) 当希望对系统"IRQ资源"进行控制时,此项可按键进入附加菜单进行IRQ的具体设置.IRQ9/IRQ-10/IRQ-11/IRQ-14/IRQ-15 assgned to(中断资源保留)该项可以选择某一个中断号(IRQ)指定给PCI设备使用或者是在系统资源中保留. 可用选项:PCIDevce(默认值),Reserved.Phoenix –Award Workstation BIOSCMOS Setup Utility IRQ Resources assigned to PCI Device Help Item assigned to PCI Device assigned to PCI Device assigned to PCI Device assigned to PCI DeviceIRQ-9 IRQ-10 IRQ-11 IRQ-14 IRQ-15↑↓→←:Move Enter: Select F5:Previous Values+/-/:Value F10:Save ESC:Exit F1:General Help F6: Optimized Defaults F7:Standard Defaults- 23 -UNIKA UR785GT主板中文手册3.1.8 PC Health Status(PC状态监控)Phoenix – Award Workstation BIOSCMOS Setup Utility PC Health Status PC Health Status Help Item Smart FAN Configurations Press Enter H/W Health Function CPU Temperature SYS Temperature CPUFAN Speed SYSFAN1 Speed SYSFAN2 Speed NB1.2V VDIMM VCORE NBPCIE Enabled 45℃/113℉39℃/102℉2782 RPM N/A N/A 1.152V 1.512V 1.352V 1.120V↑↓→←:Move Enter: Select F5:Previous Values> Smart FAN Configurations 当希望对系统"Smart FAN Configurations"进行风扇智能控制时,此项可按键进入附加菜单进行具体设置.Phoenix –Award Workstation BIOSCMOS Setup Utility Smart FAN Configurations CPUFAN Smart Mode Disabled Item Help x CPU SmartFAN Full-speed Temp 50℃x CPU SmartFan idel Temp 30℃Menu Level↑↓→←:Move Enter: Select F5:Previous ValuesCPUFAN Full-Speed Temp(系统风扇1全速工作温度) 该项可以设定系统风扇1全速运行的温度临界值,当系统侦测到系统温度高于设置的临界值时,将会控制系统风扇1全速运转. 可设置选项:30℃-100℃. CPUFAN Idel Temp(系统风扇1空闲温度) 该项可以设定系统风扇1降速运行的温度临界值,当系统侦测到系统温度低于设置的临界值时,将会控制系统风扇1降速运行. 可设置选项:30℃-100℃. Show H/W Health in POST(开机自检设置) 该项为设置开机自检时是否显示PC状况. 可用选项: Enabled,Dsabled.▲+/-/:Value F10:Save ESC:Exit F1:General Help F6: Optimized Defaults F7:Standard Defaults+/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F6: Fail-Safe Defaults F7: Optimized Defaults▲- 24 -UNIKA UR785GT主板中文手册Vcore NB1.25V 5VSB +12 +5 VDIMM CPU Temperature System Temperature CPUFan Speed SYSFAN1 SYSFAN2 CPU电压北桥电压主板5VSB电压主板+12V 电压主板+5V电压内存电压CPU温度系统温度CPU风扇转速系统风扇1转速系统风扇2转速3.1.9 Thermal Throttling Options(热量控制)Phoenix –Award Workstation BIOSCMOS Setup Utility CPU ThermalThrottling Setup CPU Thermal-Throttling Disabled Item Help x CPU Thermal-Throttling Temp 70℃x CPU Thermal-Throttling Duty 50.0% Menu Level▲↑↓→←:Move Enter: Select F5:Previous Values+/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F6: Fail-Safe Defaults F7: Optimized DefaultsCPU Thermal-Throttling(CPU热量缩减功能) 该项为设置开启或关闭CPU热量缩减功能. 可用选项: Enabled,Dsabled(默认值). CPU Thermal-Throttling Temp(CPU 热量缩减功能临界温度) 该项为设置CPU热量缩减功能临界温度. 可用选项: 50-100℃,70℃(默认值). CPU Throttling Duty(CPU热量缩减幅度) 该项为设置CPU 热量缩减功能幅度. 可用选项: 50%.- 25 -UNIKA UR785GT主板中文手册3.1.10 Sniper OverClocking Setting(狙击手超频设置)Phoenix –Award Workstation BIOSCMOS Setup Utility Sniper Overclock Settings AMD Overclocking Configuration Item Help CPU/HT Reference Clock 200 PCIE Reference Clock 100 SB Reference Clock 100 Processor Frequency Multipli Auto CPU-NB FID Auto OverV oltage Configuration Processor V oltage AOD Compatibility VDIMM Select HT Link Speed HT Link Width DRAM Command Rate Memory Clock Mode Auto Disabled 1.60V Auto Auto 2T Auto↑↓→←:Move Enter: Select F5:Previous Values+/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F6: Fail-Safe Defaults F7:Optimized DefaultsCPU/HT Reference Clock(CPU外频) 此项用于设置CPU外频. 可用选项:190-400MHz(步进1MHz). PCIE Reference Clock(PCIE总线频率) 此选项用于设置PCIE总线的频率. 可用选项:90-250MHz,100MHz(默认值). Processor Frequency Multipli(CPU倍频) 此选项用于设置CPU的倍频. 可用选项:4x......,35x. Processor V oltage(CPU电压调节) 此项用于提高处理器电压. 可用选项:Auto(默认值),0.800V,0.825V,0.850V,...... 1.325V. AOD Compatibility(AMD OverDrive功能选项) 该项为开启AMD OverDrve部分功能选项. 可用选项: Enabled,Dsabled. CPU Vcore 7-Shift(CPU核心电压设置) 该项可调节CPU的工作电压. 可用选项:Normal(默认值),+5%,+10%,15%,20%,25%,30%,35%. Set Memory V oltage(内存电压调节) 此项用于提高内存电压. 可用选项:1.60V,1.64V,1.68V,1.72V,1.76V,1.80V,1.84V,1.88V. NB-PCIE V oltage Setting(芯片组电压调节) 此项用于提高北桥芯片电压. 可用选项:1.10V,1.15V,1.20V,1.25V.- 26 -UNIKA UR785GT主板中文手册HT Link Frequency(CPU与北桥超传输总线速率) 此选项可设置CPU与北桥之间的超传输总线的速率. 可用选项:Auto (默认值),200MHz,400MHz,600MHz,800MHz,1GHzx,...... 2.6GHz. Link Width(CPU与北桥超传输总线位宽速率) 此选项可设置CPU与北桥之间的超传输总线的位宽. 可用选项:Auto (默认值), ↓8↑8,↓16↑16. DRAM Command Rate(内存命令延迟周期) 此项用于设置内存命令延迟周期. 可用选项: 1T Command(默认值),2T Command. Memory Clock Mode(系统内存时钟模式) 该项为设置DIMM参数自动分配,建议保留默认值Auto,且只有当此项选择为Manual时,下面各个选项才可以进行设置. 可用选项: Auto,Manual. Memclock Value(系统内存时钟频率调节) 该项可设置系统内存频率. 可用选项:DDR800,DDR1066,DDR1333,DDR1600.3.1.11 BIOS Security Features(口令设置)Phoenix – Award Workstation BIOSCMOS Setup Utility BIOS Security Features Security Settings Item Help Supervisor Password:Not Installed Menu Level User Passowrd :Not Installed Change/Set/Disabled Change Supervisor Password Press Enter Password Change User Password Press Enter▲Boot Sector Virus ProtectionDisabled↑↓→←:Move Enter: Select F5:Previous Values+/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F6: Fail-Safe Defaults F7: Optimized DefaultsChangs Supervisor Password(设置超级用户口令) 此选项用于设置超级用户口令,设置后,该口令即可启动计算机,也可进入BIOS修改. Changs User Password(设置超级用户口令) 此选项用于设置普通用户口令,设置后,该口令只可启动计算机,无法修改BIOS参数.3.1.12 Load Optimized Defaults(加载优化设置)该项用以读取系统默认的BIOS最佳化参数,推荐用户使用这个选项.- 27 -UNIKA UR785GT主板中文手册3.1.13 Load Standard Defaults(加载标准设置)该项用以除错,使用原BIOS只读内存中的默认值,该参数速度并非最快的,并关闭许多提高系统效能的设置.请按,,即可加载BIOS默认值.如果系统出现不稳定的情况,您不妨试试加载Standard Defaults,看看能否正常.当然了,整个系统的各项效能都会变慢,Standard Defaults本来就是为了只求能开机所做的默认值.3.1.14 Save & Exit Setup在完成所有BIOS设置后,若要覆盖旧的资料,请于主菜单选择"Save & Ext Setup"选项,按下键即可将新的参数设置存入BIOS,下次开机即可生效.3.1.15 Exit Without Saving在设置BIOS后,若不欲覆盖旧的资料,请于主菜单选择"Ext Wthout Savng"选项,按下键即可直接跳出设置程序.。

Phoenix 200HT 安装、操作和维护说明说明书

Phoenix 200HT 安装、操作和维护说明说明书

Owner’s Manual — Phoenix 200HT Installation, Operation & Service InstructionsPhoenix 200HT4029970Specifications subject to change without notice.TS-621 02/154201 Lien Rd.• Madison, WI 53704The Phoenix 200HT is one of the most effective and versatile drying devices available. The Phoenix 200HT features higher capacity and superior efficiency compared to other refrigerant dehumidifiers, removing 135 pints per day at AHAM while drawing only 7.2 amps of electricity.The 200HT also features Phoenix’s patented bypass system. At higher temperatures, where typical LGRs lose effectiveness, patented Bypass Technology helps the Phoenix 200HT continue to remove moisture, leading to faster evaporation, quicker drying, and elimination of the need to remove equipment for temperature control./user/usephoenix1 SpecificationsPart No.4029970Power110-120 Vac, 7.2 ampsWater 135 pints/day @ AHAM (80°F, 60%)RemovalRefrigerant 2 lbs. 2 oz. R410aChargeBlower380 CFMInternal Condensate Pump with 20’ lift,30’ vinyl hoseOperating 33°F to 125°FRangeFilters16” x 20” x 2” Pleated Media MERV-11Duct Intake – 12” Flex-DuctOptions Exhaust – 10” Lay-FlatWarranty Five years;First year 100% of Parts and LaborSecond-fifth year 100% of Parts of sealedrefrigeration system.Dimensions Width 20”, Height 40”, Depth 23”Weight 130 lbs.2 Operation2.1 Transporting the Phoenix 200HTThe Phoenix 200HT must always be upright whentransported by vehicle. It may be tipped on to its handle andback for loading and moving by hand.2.2 LocationNote the following precautions when locating the Phoenix200HT:• It is designed to be used INDOORS ONLY.• If used in a wet area, plug it into a GROUND FAULTINTERRUPTER.• DO NOT use the Phoenix 200HT as a bench or table.• It must always be used in the upright position.• The air inlet on top & the side outlet must be at least1 foot from walls and other obstructions to air flow. Table of Contents Introduction (1)1. Specifications (2)2. Operation (2)2.1 Transporting the Phoenix 200HT (2)2.2 Location (2)2.3 Electrical Requirements (3)2.4 Condensate Removal (3)2.5 Ducting (3)2.6 Power Button (3)2.7 Pump Purge Button (3)2.8 Hour Meter (3)2.9 Hours Button (3)2.10 Defrost Light (3)2.11 Low Pressure Protection (3)2.12 Defrost Cycle (3)2.13 Temperature Specific Operation (4)3. Maintenance (4)3.1 Air Filter (4)3.2 Storage (4)4. Service (4)4.1 Technical Description (4)4.2 Troubleshooting (5)4.3 Air Mover Replacement (5)4.4 Thermistor Replacement (6)4.5 Condensate Pump Replacement (6)4.6 Refrigerant Charging (6)4.7 Compressor/Capacitor Replacement (6)4.8 Gravity Drain Option (6)5. Wiring Diagram (7)6. Service Parts List (8)7. Warranty (10)Serial No. ___________________________Purchase Date ______/______/_____Dealer’s Name ___________________________________Read the operation and maintenance instructionscarefully before using this unit. Proper adherence to theseinstructions is essential to obtain maximum benefit fromyour Phoenix 200HT dehumidifier.INDOORS ONLY.GROUND FAULT2.3 Electrical RequirementsThe Phoenix 200HT plugs into a common grounded outlet on a 15 Amp circuit. It draws 7.2 Amps at 80°F, 60% RH. If used in a wet area, a ground fault interrupter (GFI) is required.If an extension cord is required, it must have a minimum of 14 gauge conductors if 25 feet long or less and 12 gauge conductors if greater than 25 feet long.2.4 Condensate RemovalThe Phoenix 200HT is equipped with an internal condensate pump to remove the water that is condensed during dehumidification. This allows the condensate to be pumped 30’ with the attached hose. If the condensate must be pumped more than 20 feet above the unit, a second pump must be added to relay the condensate. If the pump fails and the unit must be used before it can be replaced, the condensate can be drained by gravity (see Sec. 4.9).2.5 DuctingA detachable rectangular exhaust collar is supplied that will allow 10” round lay-flat duct to be attached to the Phoenix 200HT outlet.To attach ducting to a collar, put the plastic duct end through the collar center and roll the duct end outward so that it overlaps the outside of the collar. The duct and collar may then be quickly attached to the Phoenix 200HT by snapping the collar over the four screws at the blower outlet.2.6 Power ButtonPress the POWER button to turn the dehumidifier on or off. When starting the dehumidifier the display will show the accumulated hours. Press the POWER button again to turn the dehumidifier off. The display will also power off.2.7 Pump Purge ButtonDuring normal operation the pump automatically cycles every four minutes. Press the PURGE button to remove condensate manually from the reservoir. There are several ways to manually remove water from the reservoir:1. Press the PURGE button once and the pump will run for20 seconds2. Press and hold the PURGE button and the pump will runfor up to 30 seconds3. Press the PURGE button while the dehumidifier ispowered off and the pump will run for 30 seconds. Always manually purge the water reservoir before transport or storage. Turn off the power and allow the plugged in dehu-midifier to rest 15 minutes before the final purge.2.8 Hour MeterThe digital hour meter displays the amount of time the dehumidifier has been turned on to the tenth of an hour. The hour meter continuously cycles between total machine hours and job hours every 3 seconds. Hours are stored in memory even when the unit is unplugged. The previous totals will be displayed next time the unit is powered on.2.9 HOURS ButtonPressing the HOURS button displays the hour meter when the unit is turned off but plugged into power. To reset job hours, press and hold the HOURS button for 5 seconds when the unit is operating.2.10 DEFROST LightThe DEFROST light turns on when the unit is in defrost mode indicating when the compressor is off.DRYING TIP: Air’s ability to absorb moisture from wet surroundings and the Phoenix 200HT’s ability to remove moisture from that air is greatly improved at higher temperatures. We recommend that the area to be dried be heated to over 70°F if possible. Less drying time will be required and efficiency will improve.2.11 Low Pressure ProtectionIf the low side pressure drops to 35 PSIG, the low pressure control opens and shuts of the compressor. It is an automati-cally reset control. Its primary function is to prevent dam-age to the compressor if a leak develops in the refrigeration system.2.12 Defrost CycleIf the low side refrigerant temperature drops below the defrost set point, due to excessive frost formation onthe evaporator coil, the thermistor activates the solidstate control and the defrost light. The control cyclesthe compressor “off” and “on” by monitoring thermistor temperature. The air mover will continue to run, causing air to flow through the evaporator coil. The air will melt the ice that formed on the evaprator.When the air temperature and/or humidity increases, the evaporator temperature will rise and the thermistor will end the defrost cycle restarting the compressor.If the evaporator temperature does not reach the desired temperature, the compressor will start after 15 minutes. The system will start a timed defrost cycle. The timed defrost cycle ensures the unit will continue to remove water from the air in cool ambient conditions.2.13 Temperature Specific OperationAbove 90F –When the Phoenix 200 HT is used in high temperature conditions (above 90F), the refrigerant temperature inside the condenser rises. By removing the bypass magnet from the bypass openings, additional airflow is directed over the condenser and less airflow is directed across the evaporator. The airflow differences improve the dehumidifier efficiency.Below 90F – When the Phoenix 200 HT is used in low temperature conditions (below 90F), the refrigerant temperature inside the condenser lowers. By adding a bypass magnet to the bypass openings, additional airflowis added through the evaporator. The airflow difference improves the dehumidifier efficiency.3 Maintenance3.1 Air FilterThe Phoenix 200HT is equipped with a pleated fabric air filter that must be checked regularly. The standard filter is a MERV-11 high efficiency filter. Operating the unit with a dirty filter will reduce the dehumidifier’s capacity and efficiency and may cause the compressor to cycle off and on unnecessarily on the defrost control.IMPORTANT: DO NOT operate the unit without the filteror with a less effective filter as the heat exchanger and coils inside the unit could become clogged and require disassembly to clean.3.2 StorageThere are two issues to consider when the Phoenix 200HT is stored between uses. Both pertain to the water trapped in the unit: damage caused by freezing or biological growth. The effect of the trapped water can be greatly reduced if precautions are taken to remove as much as possible before storage.1. Use the pump purge switch (see Sec.2.7) to reduce thewater level in the reservoir.2. Stretch the hose flat to drain it completely. Raise oneend above your head and spool to drain water out of the other end.If the unit will not be exposed to freezing temperatures, an alternative to reduce biological growth is to flush the unit with a bio-fungicide that is approved for use with copper, aluminum and polyethylene. To flush:1. Run the hose to a drain.2. Plug in the unit but do not turn it on.3. Remove the air filter. Slowly pour a quart of the chemicalthrough the heat exchanger4. Hold in the pump purge switch to reduce the water levelin the reservoir.5. Flush with water.CAUTION: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard.4.1 Technical DescriptionThe Phoenix 200HT uses a refrigeration system similar to an air conditioner’s to remove heat and moisture from incoming air, and to add heat to the air that is discharged (see Fig. 2).Hot, high pressure refrigerant gas is routed from the compressor to the condenser coil (see Figure 2). The refrigerant is cooled and condensed by giving up its heatto the air that is about to be discharged from the unit. The refrigerant liquid then passes through a filter/drier and capillary tubing which cause the refrigerant pressure and temperature to drop. It next enters the evaporator coil where it absorbs heat from the incoming air and evaporates.The evaporator operates in a flooded condition, which means that all the evaporator tubes contain liquid refrigerant during normal operation. A flooded evaporator should maintain constant pressure and temperature across the entire coil, from inlet to outlet.Figure 2: Refrigeration systemThe mixture of gas and liquid refrigerant enter the accumulator after leaving the evaporator coil. The accumulator prevents any liquid refrigerant from reaching the compressor. The compressor evacuates the cool refrigerant gas from the accumulator and compresses it to a high pressure and temperature to repeat the process.4.2 TroubleshootingNo dehumidification, neither hour meter display nor compressor run and POWER button does not turn ON.1. Unit unplugged or no power to outlet2. Defective control board3. Loose connection in internal wiringNo dehumidification, neither hour meter display nor compressor run with POWER button ON.1. Defective control board2. Loose connection in internal wiringSome dehumidification, air mover runs continuously but compressor only runs sporadically.1. Unit is in defrost cycle, DEFROST light on2. Defrost thermistor defective or loose3. Loose connection in compressor circuit4. Defective compressor overload5. Defective compressor6. Low refrigerant charge7. Defrost thermistor detached from coil8. Loose connection to low pressure switch.No dehumidification, air mover runs but compressor does not.1. Bad connection in compressor circuit2. Safety float switch closed, check pump reservoir3. Defective compressor capacitor4. Defective compressor overload5. Defective compressor6. Defective control board7. Low refrigerant charge8. Loose connection to low pressure switch.Air mover does not run. Compressor runs briefly but cycles on and off.1. Loose connection in blower circuit2. Obstruction prevents impeller rotation3. Defective air mover4. Defective control board.Unit removes some water but not as much as expected.1. Air temperature and/or humidity have dropped2. Humidity meter and/or thermometer used are out ofcalibration3. Unit has entered defrost cycle4. Air filter dirty5. Defective defrost thermistor6. Low refrigerant charge7. Air leak such as loose front cover8. Defective compressor9. Restrictive exhaust or inlet ducting10. Defrost thermistor detached from coilUnit runs but does not pump water.1. Hose kinked or plugged2. Pump motor defective3. Pump check valve plugged4. Bad connection in pump circuit5. Hose disconnected internally6. Defective control boardUnit pumps water automatically but not when PURGE button is pushed.1. Bad connection in PURGE button circuit2. Defective control boardEvaporator coil frosted continuously, low dehumidifying capacity.1. Defrost thermistor loose or defective2. Low refrigerant chargeCompressor runs with POWER button OFF.1. Defective control board2. Upper housing not sealed to tower4.3 Air Mover ReplacementThe blower has a PSC motor and internal thermal overload protection. If defective, the complete assembly must be replaced.1. Unplug power cord2. Remove the front cover3. Remove the 5 screws attaching blower inlet ring4. Remove the 4 screws mounting impeller to underside ofbase plate5. Disconnect the blower leads6. Reassemble the new blower using the above procedurein reverse4.4 Thermistor ReplacementThe defrost thermistor is attached to the refrigerant suction line between the accumulator and the evaporator.To replace thermistor:1. Unplug the dehumidifier2. Remove the front cover3. Remove aluminum tape4. Remove control panel5. Remove right panel screws, viewed from front, attachingfront filter bracket, and evaporator6. Remove control board7. Detach thermistor from control board jumper, (EVAP)8. Reassemble thermistor and dehumidifier using the aboveprocedure in reverse4.5 Condensate Pump ReplacementThe internal condensate pump removes water that collects in the reservoir.To replace the condensate pump:1. Unplug the unit2. Remove the rear skidplate3. Unplug the pump wires from the wire harness4. Remove the condensate hose and the screw attachingthe pump bracket to the base5. Replace the pump, hose, wiring, bolts, and cover in thereverse order4.6 Refrigerant ChargingIf the refrigerant charge is lost due to service or a leak, a new charge must be accurately weighed in. If any of theold charge is left in the system, it must be removed before weighing in the new charge. Refer to the unit nameplate for the correct charge weight and refrigerant type.4.7 Compressor/Capacitor ReplacementThis compressor is equipped with a two terminal external overload, run capacitor, but no start capacitor.4.8 Gravity Drain OptionIf the condensate pump fails and cannot be replaced immediately, the Phoenix 200HT can be used by draining by gravity.1. Unplug the unit and remove the front cover.2. Push the plastic plug on the right side (see Fig. 4) outfrom inside the unit.3. Locate the heavy vinyl hose that connects the drain panto the condensate pump. Pull the end out of the pump.4. Remove tie wrap holding drain tube to suction line.5. Push that end of the vinyl hose through the hole in theright side.6. Connect a garden hose and run it to a drain. Keep thehose as flat to the floor as possible to avoid air pocketsthat would hinder draining. Placing the unit on something above the floor will also improve draining.5 Wiring DiagramSpecifications subject to change without notice.6 Service PartsItemDescriptionQtyPart No.1 Top Cover 1 40285832 Top Cover Hinge 2 40272673 Wheel 12” Gray 2 40263044 Cotter Pin 3/32” 1 12844045 Air Filter 1.75 x 15.5 x 19.5 1 40214756 Hose Plastic 0.56 ID x 24 1 40298947 Hose Plastic 0.38 ID 1 40219098 Hose Plastic 0.25ID x 33 1 40249169 Coupling Body 0.25 Tube 1 402491010 Coupling Insert 0.38 Tube 1 402308011 Control Board 1 403008312 Capacitor Compressor 45mfd 370V 1 4033032-0513 Capacitor Impeller 15mfd 370V 1 4033031-0714 Thermistor 1 403127915 Cord1 403229716 TOS, 8.2 KBTU, R410A 1 402918217 Overload Compressor 1 402918318 Evaporator Coil 1 402856519 Condenser Coil 1 402856620 Condensate Pump 1 403449621 Fan Motorized Impeller 1 402665722 Inlet Ring 1 402856423 Wire Duct Collar 1 402859324 Filter Drier (not shown) 1 402951025 Wire Harness (not shown) 1 403008426 Handle 1 402609427 Bolt M10-1.5 X 35 2 117779228 Washer M10 X 30 2 402551729 Hex Lock Nut M10-1.5 2 122378030 Skid Panel 1 4035913This page intentionally left blank.Phoenix 200HT Dehumidifier Limited WarrantyWarrantor:Therma-Stor LLC4201 Lien RdMadison, WI 537041-800-533-7533Who Is Covered: This warranty extends only to the original end-user of the Phoenix 200HT dehumidifier, and may not be assigned or transferred.First Year Warranty: Therma-Stor warrants that, for one (1) year the Phoenix 200HT dehumidifier will operate free from any defects in materials and workmanship, or Therma-Stor will, at its option, repair or replace the defective part(s), free of any charge.Second Through Fifth Year Warranty: Therma-Stor further warrants that for a period of five (5) years, the condenser, evaporator, and compressor of the Phoenix 200HT dehumidifier will operate free of any defects in material or workmanship, or Therma-Stor, at its option, will repair or replace the defective part(s), provided that all labor and transportation charges for the part(s) shall be borne by the end-user. End-User Responsibilities: Warranty service must be performed by a Servicer authorized by Therma-Stor. If the end-user is unable to locate or obtain warranty service from an authorized Servicer, he should call Therma-Stor at the above number and ask for the Therma-Stor Service Department., which will then arrange for covered warranty service. Warranty service will be performed during normal working hours. The end-user must present proof of purchase (lease) upon request, by reasonable and reliable means. The end-user is responsible for normal care. This warranty does not cover any defect, malfunction, etc. resulting from misuse, abuse, lack of normal care, corrosion, freezing, tampering, modification, unauthorized or improper repair or installation, accident, acts of nature or any other cause beyond Therma-Stor’ reasonable control.Limitations and Exclusions: If any Phoenix 200HT Dehumidifier part is repaired or replaced, the new part shall be warranted for only the remainder of the original warranty period applicable thereto (but all warranty periods will be extended by the period of time, if any, that the Phoenix 200HT Dehumidifier is out of service while awaiting covered warranty service).UPON THE EXPIRATION OF THE WRITTEN WARRANTY APPLICABLE TO THE Phoenix 200HT DEHUMIDIFIER OR ANY PART THEREOF, ALL OTHER WARRANTIES IMPLIED BY LAW, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL ALSO EXPIRE. ALL WARRANTIES MADE BY Therma-Stor ARE SET FORTH HEREIN, AND NO CLAIM MAY BE MADE AGAINST Therma-Stor BASED ON ANY ORAL WARRANTY. IN NO EVENT SHALL Therma-Stor, IN CONNECTION WITH THE SALE, INSTALLATION, USE, REPAIR OR REPLACEMENT OF ANY Phoenix 200HT DEHUMIDIFIER OR PART THEREOF BE LIABLE UNDER ANY LEGAL THEORY FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES INCLUDING WITHOUT LIMITATION WATER DAMAGE (THE END-USER SHOULD TAKE PRECAUTIONS AGAINST SAME), LOST PROFITS, DELAY, OR LOSS OF USE OR DAMAGE TO ANY REAL OR PERSONAL PROPERTY.Some states do not allow limitations on how long an implied warranty lasts, and some do not allow the exclusion or limitation of incidental or consequential damages, so one or both of these limitation may not apply to you.Legal Rights: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.。

凤凰3.0安装后进入过程和设置概要讲义

凤凰3.0安装后进入过程和设置概要讲义

1首次进入选择这个图标进入ChooiChineseT取iJ口2、点击下一步3、再点击下一步*初始设墨Wizard感谢您选择凤IL 模拟誥亠老鸟©•拥有世界级的物理引擊、照片级的飞行场景和大量可调整的彗数,训练模式与比赛 模式一应俱全,凤凰檯拟器使学会飞行和 雕琢技术变得比从前更为迅速和简单舟■本向导将型保完战初始设赛,以便使你尽 快体验到飞翔的乐趣。

点击下面的按钮开始设盖逬程.......设墨新遥控器Wizard本向导将弓导你完成新遲控器的设議过程.氏便你能嘏在凤凰模W.器 中控制模型。

本向导包括以下步靈: ■准备好你的蛊控器 -校准你的遥控器 •控制通道设詈点击“下一步”来开始配盖过程……4、点击下一步豊设羞新翟控S WizardX在凤凰模拟器里有效地使用你的暹控器之前、你应该按照下列歩靈确 保取得最佳效果:■在霆控器中中为凤啟创建一个新的、空白的模型如果你的遥控器具有该功能』你应该为凤凰专门创建一个新的模型并 选择它。

•将養控器设定為PPM 谓制模式如果你的暹控暮不泾Z4GH2展频模式』尔应该确认已经将它设主为PPIVI 输出而非PCM 模式。

•将逼控器设定为直升机模式如果谨控器上有这一选项,你应该选择直升机模式,无论你在凤凰中 主要飞固定翼还是直升机,以便更全面地调节各通遒的功育翼 •关冈卜字盘心混控功能如果遥控器的设墨菜单中有这一选项,你应该将十字盘设定为单舵机 (9『)模式戒者幫用CCPM»控。

完成以上步鉴之后,请点击“下一步“一~~~嶺返回~]『下二歩"5、先把2个摇杆居中、所有金属开关向后,或者向上,其他旋钮、塑料开关居中(居中的 时候,会有提示音),做到后点击下一步取消] 带川 『¥_步驚]欢迎梗用设羞新廷控器向导。

7、如图再确认下摇杆是否在中立点,然后点击下一步取消 返回3取消下6、点击下一步,枝准匡控Wiiard 层准你的&彳要开始校旅送控罟,请点击下面的“下一步"按钮徹瞬踝以使叫道际开关和粗的全部魚而这是一个简单的过程,包括決下歩礫:・确认你的谨控器个功能已经设置为默认 ・确认遥控器的微调钮均已墨于中立位墨 ・将遥控器的所有摇杆羞于中立应羞 ・移动遥控器的所有揺杆到最大限度」舍校准理控S Wizard* \确认你的遥控器各功能已经设詈为科认为了确保校准成功「谨控器的所有幵关都应置于默认位賈』如关闭f 正常位置请注意,这里包括所有內羞的比例切换开关、3D 幵关或油门保持 幵关。

凤凰系统参考手册说明书

凤凰系统参考手册说明书

Phoenix SystemReference Manual020-101183-16Phoenix SystemReference Manual020-101183-16NOTICESCOPYRIGHT AND TRADEMARKSCopyright © 2019 Christie Digital Systems USA, Inc. All rights reserved.All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.GENERALEvery effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which may not be reflected in this document. Christie reserves the right to make changes to specifications at any time without notice. Performance specifications are typical, but may vary depending on conditions beyond Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied warranties of fitness for a particular purpose. Christie will not be liable for errors contained herein or for incidental or consequential damages in connection with the performance or use of this material.WARRANTYProducts are warranted under Christie’s standard limited warranty, the complete details of which are available by contacting your Christie dealer or Christie. In addition to the other limitations that may be specified in Christie’s standard limited warranty and, to the extent relevant or applicable to your product, the warranty does not cover:a)Problems or damage occurring during shipment, in either direction.b)Problems or damage caused by combination of a product with non-Christie equipment, such as distribution systems, cameras, DVD players,etc., or use of a product with any non-Christie interface device.c)Problems or damage caused by the use of any replacement part or component purchased or obtained from an unauthorized distributor ofChristie replacement parts or components including, without limitation, any distributor offering Christie replacement parts or componentsthrough the Internet (confirmation of authorized distributors may be obtained from Christie).d)Problems or damage caused by misuse, improper power source, accident, fire, flood, lightning, earthquake or other natural disaster.e)Problems or damage caused by improper installation/alignment, or by equipment modification, if by other than Christie service personnel or aChristie authorized repair service provider.f)Problems or damage caused by use of a product on a motion platform or other movable device where such product has not been designed,modified, or approved by Christie for such use.g)Problems or damage caused by use of a projector in the presence of an oil-based fog machine or laser-based lighting that is unrelated to theprojector.h)Except where the product is designed for outdoor use, problems or damage caused by use of the product outdoors unless such product isprotected from precipitation or other adverse weather or environmental conditions and the ambient temperature is within the recommended ambient temperature set forth in the specifications for such product.i)Defects caused by normal wear and tear or otherwise due to normal aging of a product.The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.The warranty does not obligate Christie to provide any on-site warranty service at the product site location.PREVENTATIVE MAINTENANCEPreventative maintenance is an important part of the continued and proper operation of your product. Please see the Maintenance section for specific maintenance items as they relate to your product. Failure to perform maintenance as required, and in accordance with the maintenance schedule specified by Christie, will void the warranty.REGULATORY (if applicable)The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a commercial environment. The product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of the product in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at the user’s own expense.CAN ICES-3 (A) / NMB-3 (A)이기기는업무용(A급)으로전자파적합등록을한기기이오니판매자또는사용자는이점을주의하시기바라며, 가정외의지역에서사용하는것을목적으로합니다.ENVIRONMENTALThe product is designed and manufactured with high-quality materials and components that can be recycled and reused. This symbolmeans that electrical and electronic equipment, at their end-of-life, should be disposed of separately from regular waste. Please dispose of the product appropriately and according to local regulations. In the European Union, there are separate collection systems for used electrical and electronic products. Please help us to conserve the environment we live in!China RoHS Compliance Information 关于中国《电子信息产品污染控制管理办法》的说明•Environmentally Friendly Use Period环保使用期限The year number in the centre of the label indicates the Environmentally Friendly UsePeriod, which is required to mark on the electronic information product sold in Chinaaccording to the China RoHS regulations.本标志中表示的年数是根据《电子信息产品污染控制管理办法》(2006年2月28日)以及《电子信息产品污染控制标识要求》(2006年11月6日)制定的、适用于在中华人民共和国境内销售的电子信息产品的环保使用期限•Material Concentration Values Table有毒有害物质含量表Part Name 部件名称Material Concentration(有毒有害物质或元素)铅(Pb)汞(Hg)镉(Cd)六价铬(Cr 6+)多溴联苯(PBB)多溴二联苯醚(PBDE)Audio/Videoinput PCB 音影输入卡X O O O O O System boardPCB 主板X O O O O O Mechanicalenclosure* 机械附件X O O O O O Note:O: indicates that the concentration value of the particular hazardous substance contained in all the homogeneous materials for this part, according to EIP-A, EIP-B, EIP-C, is below the stipulated levels in China SJ/T11363-2006.表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006规定的限量要求以下。

航模模拟器(凤凰,g)安装使用教程

航模模拟器(凤凰,g)安装使用教程

目录一、模拟器到货清单介绍 ..........................................................................................................二、介绍光盘内容,介绍推荐安装软件,凤凰PhoenixRC4.0跟RealFlightG6.5.............1.网络光盘。

...............................................................................................................................2.新手推荐安装的两款软件。

...................................................................................................三、软件安装教程(凤凰4.0跟G6.5) ........................................................................................1.凤凰PhoenixRC4.0安装教程(哪个软件的顺序, 安装顺序以截图为引导。

) ..................2.凤凰PhoenixRC4.0常见问题...................................................................................................3.Realflight G6.5的安装顺序 ......................................................................................................4.RealFlight G6.5常见使用问题..................................................................................................一、模拟器到货清单介绍光盘序列号说明。

PHOENIX-BIOS设置全程图解

PHOENIX-BIOS设置全程图解

PHOENIX-BIOS设置全程图解图解一——基本设置近日很多朋友问,怎么设置光驱启动,总是说的不太明白,所以就用图解说下,直观点,BIOS有三种,AWORD、AMI、PHOENIX这里先介绍PHOENIX。

按F2进入PHOENIXBIOS设置,就会出现如下界面,system time 设置时间格式为(时,分,秒)SYTEM DATA 设置日期LEGACY DISKETEE A:/B: 设置软驱PRIMARY MASTER/SLAVE 设置IDE1设置SECONDARY MASTER/SLAVE 设置IDE2设置keyboard-features 键盘特征,打开后出现下面界面numlock 小键盘灯keyboard auto repeat rate 键盘自动重复时间keyboard auto repeat delay 键盘自动重复延迟时间SYSTEM MENORY 系统内存EXTENDED MEMORY 扩展内存BOOT-time diagnostic screnn 启动时间诊断屏幕PhoenixBIOS Setup Utility图解二——高级设置Advanced(高级设置)Multiprocessor Specification 多重处理器规范 1.4 /1.1它专用于多处理器主板,用于确定MPS的版本,以便让PC制造商构建基于英特尔架构的多处理器系统。

与1.1标准相比,1.4增加了扩展型结构表,可用于多重PCI总线,并且对未来的升级十分有利。

另外,v1.4拥有第二条PCI 总线,还无须PCI桥连接。

新型的SOS(Server Operating Systems,服务器操作系统)大都支持1.4标准,包括WinNTt和Linux SMP(Symmetric Multi-Processing,对称式多重处理架构)。

如果可以的话,尽量使用1.4。

Installed o/s 安装O/S模式有IN95和OTHER两个值。

安装说明书- 20p-in017-en-p- 安装PowerFlex

安装说明书- 20p-in017-en-p- 安装PowerFlex

Installation Instructions PowerFlex ® DC Drive - Frame C Power Supply Filter Circuit Board What This Kit Includes•Power Supply Filter circuit board (with plug-in terminal blocks)•Four screws •Cables for connectors X5, XTM and XUV •Cable ties •Static strap Tools That You Need•Phillips ® screwdriver •Flathead screwdriver Phillips ® is a registered trademark of Phillips Screw Company.What You Need to Do To install the Power Supply Filter board:❐ Step 1:Remove power from the drive❐ Step 2:Remove the protective covers❐ Step 3:Remove the existing Power Supply Filter board❐ Step 4:Install the new Power Supply Filter board❐ Step 5:Replace the protective covers and document the change!ATTENTION: Only qualified personnel familiar with DC drives and associated machinery should plan or implement the installation, start-up and subsequent maintenance of the system. Failure to comply may result in personal injury and/or equipment damage.!ATTENTION: To avoid an electric shock hazard, ensure that all power to the drive has been removed before performing the following.!ATTENTION: This drive contains ESD (Electrostatic Discharge) sensitive parts and assemblies. Static control precautions are required when installing, testing, servicing or repairing this assembly. Component damage may result if ESD control procedures are not followed. If you are not familiar with static control procedures, reference A-B publication 8000-4.5.2, “Guarding Against Electrostatic Damage” or any other applicable ESD protection handbook.2PowerFlex® DC Drive - Frame C Power Supply Filter Circuit BoardStep 1:Remove Powerfrom the Drive1.Remove and lock-out all incoming power to the drive.!ATTENTION: Remove power before making or breaking cableconnections. When you remove or insert a cable connector withpower applied, an electrical arc may occur. An electrical arc cancause personal injury or property damage by:•sending an erroneous signal to your system’s field devices,causing unintended machine motion•causing an explosion in a hazardous environmentElectrical arcing causes excessive wear to contacts on both themodule and its mating connector. Worn contacts may create electrical resistance.PowerFlex® DC Drive - Frame C Power Supply Filter Circuit Board3Step 2:Remove the Protective Covers 1.Disconnect the DPI cable from the HIM assembly (if present).2.Loosen, but do not remove, the screws that secure the bottom cover tothe drive, then slide the cover down and off the drive chassis.3.Loosen, but do not remove, the screws that secure the top cover to thedrive, then slide the cover up and off the drive chassis.Important:The HIM assembly is connected via a cable to the Control board and therefore will not pull free from the drive untildisconnected. See step 4 below for instructions.4PowerFlex® DC Drive - Frame C Power Supply Filter Circuit Board4.Disconnect the HIM Communication cable from the connector on theupper right corner of the Control board and set the cover aside.Step 3:Remove theExisting Power Supply FilterBoardImportant:Mark all connections and wires before removal to avoid incorrect wiring during reassembly.Important:Note the location of the cable ties that secure the cables connected to the Transient Noise Filter board for correct positioning during reassembly.1.Remove all wires from the bottom of the terminal blocks on the Power Supply Filter board.2.Remove the two screws that secure the bottom of the Power Supply Filter board to the drive.Pull tabs out to disconnect cable.Remove wires and screwsNote : The Power SupplyFilter circuit board is locatedin the lower right corner ofthe drive chassis, justabove the power terminals.PowerFlex® DC Drive - Frame C Power Supply Filter Circuit Board 53.The EMI Shield and Control board must be moved in order to removethe Power Supply Filter board. Carefully disconnect the cables fromconnectors XFCD and XR on the Control board.4.Loosen the two captive screws at the top of the Control EMI shield and partially lower the shield. The shield will not open to its full extent dueto a cable connection between the Switching Power Supply board andthe Pulse Transformer board. DisconnectcablesLoosen screws6PowerFlex® DC Drive - Frame C Power Supply Filter Circuit Board5.Disconnect the cable from connector XSW on the Switching PowerSupply board and lower the Control EMI shield until it rests on thedrive chassis.Important:If the drive is not in a vertical position, the Control EMIshield will not stay open without a means of restraint.6.Disconnect the wires from connectors X5, XTM, and XUV on thePower Supply Filter board.Remove cable Remove connectionsPowerFlex® DC Drive - Frame C Power Supply Filter Circuit Board7 7.Remove all connections from the top of the terminal blocks on thePower Supply Filter board.8.Remove the two screws that secure the top of the Power Supply Filterboard to the drive and remove the board from the drive.Step 4:Install the New Power Supply Filter Board Install the Power Supply Filter board in reverse order of removal as detailed in Step 3: Remove the Existing Power Supply Filter Board on page4.1.Inspect the existing X5, XTM and XUV cables for burn marks, cracksor loose connectors. If necessary, replace the cables on the PowerSupply Filter board with the new cables provided.2.Replace any cables ties as necessary.Remove wiresRemove screw Remove screwPublication 20P-IN017A-EN-P - March 2009Copyright © 2009 Rockwell Automation. All rights reserved. Printed in USA.Step 5:Replace theProtective Covers andDocumenting the Change 1.Replace the protective covers in the reverse order of removal as detailed in Step 2: Remove the Protective Covers on page 3.2.Install DPI cable (if present).3.Record the installation of the new Power Supply Filter board and dateof installation on the Field Installed Option label on the side of the drive(as shown below).Related Documentation Allen-Bradley publications are available on the internet at/literature .For . . .Read this document Publication Number In depth information regarding theoperation of PowerFlex Digital DCdrives User Manual - PowerFlex Digital DC Drives 20P-UM001…。

凤凰卫士数据库配置说明书

凤凰卫士数据库配置说明书

Itensoft 凤凰卫士版一、SQL Express Server2005数据库安装及配置公司名称:安腾软件(无锡)开发有限公司公司地址:江苏省无锡市高新技术开发区长江北路七号科技园一区二零八邮政编码: 214028公司网址:联系电话: +86 (510) 85210395 85218821传真: +86 (510) 828980611、SQL Express Server2005数据库安装1.运行SQL安装程序SQLEXPR_ADV_CHS.EXE:2.点击选择接受许可并点击下一步:3.点击继续4.组件安装完毕点击继续5.进入SQL正式安装点击继续:注意:如果在系统配置检查中出现错误信息是不可以继续的,如果安装过程中发现有错误提示请查阅相关资料进行修正。

6.点击继续:7.点击完成安装并进入功能配置向导:注意:默认情况下连接组件以及management studio express为未选中状态,我们需要选中它们。

8.点击出现下图:9、如图选择好点击,出现下图:10.按照默认设置点击:注意:在这里一定要选择混合模式,设定密码的时候一定需要设置一个强密码。

11.一切都设置之后,点击12.安装如图设置点击:13.继续点击14继续点击.15.点击,结束后出现下图:16.点击完成安装后出现下图17.点击SQL全部安装结束2、SQL Express Server2005数据库配置前言:当你安装完数据库以后,你可以在开始——程序——Microsoft SQL Server 2005里面找到两个配置工具,一个是配置管理器,一个是外围应用配置器。

下面我们就来说说这两个配置工具的用法首先我们开始进行外围应用配置器的设置1.运行外围应用配置器2.点击在弹出来的窗口的在远程连接选项设置里面安装下图进行设置并点击确定下面我们开始进行配置管理器的设置3. 运行配置管理器并找到SQLEXPRESS组件,在它的右页面下双击TCP/IP选项并将其IP 地址页面如图下设置:在所有的TCP动态端口中将默认的0全部去掉,为空。

phoenix contact sk 14 接线端子 用户手册.pdf说明书

phoenix contact sk 14 接线端子 用户手册.pdf说明书

PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de
Downloaded from electronic components distributor
Page 2 / 4 Order No.: 3025176
Page 4 / 4 Mar 24, 2010
PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de
Downloaded from electronic components distributor
Page 1 / 4 Mar 24, 2010
SK 14 Order No.: 3025176
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=3025176
Accessories
Item
Designation
Assembly 3025341 0404428
AB-SK AB/SS
0402174
NLS-CU 3/10 SN 1000MM
Commercial data EAN Pack Customs tariff Weight/Piece Catalog page information
4017918130305 10 pcs. 85369010 0.02036 KG Page 678 (CL-2009)
Technical data
Page 3 / 4 Mar 24, 2010
SK 14 Order No.: 3025176
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=3025176

Phoenix自动化界面操作手册

Phoenix自动化界面操作手册

1、创建测试场景场景用于组织多个用例,执行时可以以1个用例为单位,即执行一个用例,也可以执行一个场景,即执行多个用例,执行的顺序按创建场景时添加的顺序。

删除该场景时,会将该场景下的用例及数据一起删除。

创建场景步骤:在首页点击场景管理->新增场景->输入场景名及功能说明->提交即可2、创建用例及数据(1)增加用例用例是用来组织测试数据,定位信息的(webUI),逻辑代码的。

创建用例步骤:首页->用例管理->选择所属场景->输入用例名及用例功能说明->选择用例类型->选择消息发送状态->提交即可。

对应的用例类型及消息发送类型的说明,如图:(2)用例列表页面管理操作中,可增加业务逻辑代码,添加定位信息,数据等。

(3)用例执行体增加在phoenix_develop工程下开发和调试用例,调试通过后,全部复制,粘贴到用例的执行体中。

如有以下用例代码:package org.phoenix.cases;import java.util.HashMap;import java.util.LinkedList;import java.util.Map.Entry;import org.phoenix.enums.LocatorType;import org.phoenix.model.CaseLogBean;import org.phoenix.model.InterfaceBatchDataBean;import org.phoenix.model.LocatorBean;import org.phoenix.model.UnitLogBean;import org.phoenix.proxy.ActionProxy;/*** 浏览器驱动测试类:* 通用方法API:monAPI()....* webUI/mobileUI用例API:phoenix.webAPI()....* 接口测试用例API:phoenix.interfaceAPI()....* androidappAPI:phoenix.androidAPI()....* IOSappAPI:phoenix.iosAPI()....* svnClientAPI:phoenix.svnClient()....* ftpClientAPI:phoenix.ftpClient()....* socketClientAPI:phoenix.telnetClient()....* ...* @author mengfeiyang*/publicclass TestBrowserDriver extends ActionProxy{privatestatic String caseName = "浏览器驱动测试用例";public TestBrowserDriver() {}@Overridepublic LinkedList<UnitLogBean>run(CaseLogBeancaseLogBean) {init(caseLogBean);//必须有这一步//phoenix.webAPI().setFirefoxExePath("D:\\Program Files (x86)\\Mozilla Firefox\\firefox.exe");//使用Firefox浏览器时,必须添加//phoenix.webAPI().setChromeDriverExePath("C:\\Program Files (x86)\\Google\\Chrome\\Application\\chromedriver64.exe");//使用chrome 浏览器时,必须添加,且chromedriver64.exe必须和chrome.exe在同一目录下HashMap<InterfaceBatchDataBean, HashMap<String,String>>datas = monAPI().loadWebCaseDatas(caseName);//加载数据库测试数据方法HashMap<String,LocatorBean> locators =monAPI().addLocator(caseName);//加载定位信息的方法for(Entry<InterfaceBatchDataBean, HashMap<String, String>>es : datas.entrySet()){InterfaceBatchDataBeanbatchData = es.getKey();batchData.getExpectData();//这批数据的执行结果期望值HashMap<String, String>dataBlocks = es.getValue();String phoenixframe = dataBlocks.get("输入数据1");//在数据库中此数据的keyphoenix.webAPI().openNewWindowByFirefox("");//phoenix.webAPI().openNewWindowByChrome("");//phoenix.webAPI().openNewWindowByIE("");//phoenix.webAPI().openNewWindowByHtmlUnit("", true, BrowserVersion.INTERNET_EXPLORER);//phoenix.webAPI().openNewWindowByPhantomJs("") ;phoenix.webAPI().webElement("//*[@id=\"kw\"]",LocatorType.XPATH).se tText(phoenixframe);//引用数据phoenix.webAPI().webElement(locators.get("btnLocator").getLocatorDa ta()).click();//使用数据中的定位信息,等同于phoenix.webAPI().webElement("btnLocator").click();String r =phoenix.webAPI().webElement("//*[@id=\"su\"]",LocatorType.XPATH).getAttribute("value");//数据库中的数据可以与页面不变的数据混合使用phoenix.checkPoint().checkIsEqual(r, "百度一下");//调用检查点,检查结果会在日志中统计monAPI().addLog("我是自定义的");//可以手动插入一句日志,该日志会在最后的日志记录中体现phoenix.webAPI().sleep(1000);phoenix.webAPI().closeWindow();}return getUnitLog();}publicstatic void main(String[] args) {LinkedList<UnitLogBean>ll =new TestBrowserDriver().run(new CaseLogBean());for(UnitLogBean l : ll){System.out.println(l.getContent());}}}全部复制,并粘贴到控制台后如图:过程如图:(4)接口测试数据编辑批量导入,Excel模版如下:用例列表界面选择接口用例:点击数据连接进入数据编辑界面:支持两种方式为接口用例增加批次数据:4.1 手动输入>>1,点击上图的添加数据批次按钮:>>2、增加完成后如界面:>>3、点击“修改添加参数”链接,并点击新增参数:>>4、比如我们现在测试这样的一个url:http://xxx/x.action?p1=d1&p2=d2,添加参数的时候,这样添加:提交后如:Tips:此时点击按钮,则会导出一个模版,此模版用于下面的第二种方式。

PhoenixSuit使用说明文档

PhoenixSuit使用说明文档

PhoenixSuit使用说明文档PhoenixSuit使用说明文档PhoenixSuit使用说明文档 (1)1.安装PhoenixSuit软件 (2)1.1 安装 (2)1.2 程序位置 (5)2. 运行PhoenixSuit软件 (5)2.1 运行PhoenixSuit软件 (5)2.2 PhoenixSuit软件简介 (7)3 PhoenixSuit软件功能模块使用说明 (8)3.1 主页功能模块 (8)3.2 一键刷机功能模块 (9)3.3 设备管理模块 (11)3.4 新闻页面模块 (15)1.安装PhoenixSuit软件1.1 安装双击图标运行PhoenixSuit软件安装程序PhoenixSuitPacket.msi, 如图1.1所示图1.1安装过程按照下图提示点击:注意:在运行安装过程中可能会出现如图1.3和1.4所示询问对话框,请按提示进行进一步操作继续完成安装进程。

图1.3图1.41.2 程序位置1.2.1安装提示界面自动关闭后,打开开始菜单可以看到:点击即可启动PhoenixSuit软件。

1.2.2 除了上面这个方法,还可以通过双击桌面快捷方式的方法启动PhoenixSuit软件。

2. 运行PhoenixSuit软件2.1 运行PhoenixSuit软件在桌面双击PhoenixSuit快捷方式或者点击开始菜单中对应的快捷方式来运行PhoenixSuit软件,软件运行界面如图2.1.1所示。

注意:切勿与LiveSuit软件或者其它量产工具同时运行。

图2.1.1设备接入之后,如图2.1.2所示。

注意:软件一次只能操作一个智能设备,请勿同时插入多个开启了adb连接的智能设备。

图2.1.22.2 PhoenixSuit软件简介图2.2.12.2.1 软件最上方区域是客户区,左键按住可以拖动窗口移动。

客户区4个主功能按钮,点选不同的按钮可以切换到不同的功能页面。

程序启动之后默认处于首页页面。

Phoenix基本使用说明-2.0

Phoenix基本使用说明-2.0

Phoenix基本使用说明Phoenix软件的使用说明前言Phoenix是一款立体量测软件平台。

通过立体观测,再加上手轮、脚盘、脚踏实现人机交互的量测模式。

一、运行环境操作系统:Window XP内存:2G以上显卡:NVIDIA Quadro FX 3400/4400 以上二、数据要求工程文件:prj影像文件:tif,压缩tif;导入矢量:dxf,dwg参考栅格数据:g-tif,tif+tfw三、Phoenix界面介绍详解1、菜单条2、标准工具条3、编辑工具栏4、当前层可输入符号代码,直接设定为当前层。

在每个工具条后面都会有个,点击这个向下的箭头,就会出现“编辑”,“自定义…”两个选项。

如下图:编辑中,可以编辑工具条上的按钮显示或隐藏。

如下图:工具显示5、工程缩影6、工作区列表7、影像列表8、栅格数据列表9、主视图窗口10、立体视图窗口立体像对左右片片号缩放比例(屏幕上一个像素为实地的距离,单位:m)11、程序状态窗口12、状态栏前面为状态提示部分;后面x、y、z为当前光标的坐标四、工具栏功能使用说明1、缩放➢选择缩放工具鼠标按住左键“上、下”拖动,“上”放大、“下”缩小➢鼠标滚轮+ctrl“上、下”滚动,“上”缩小、“下”放大(任何状态下)2、移动➢选择移动工具鼠标按住左键拖动移动➢按住键盘ctrl键,同时鼠标按住右键拖动移动(任何状态下)3、高程➢选择高程工具按住鼠标“左”键,“上、下”拖动,“上”高程升高、“下”高程降低➢鼠标滚轮微调高程,滚轮动一下调节屏幕上一个像素(任状态况下)4、按比例缩放放大指定倍数,缩小指定倍数5、按比例缩放设置可设置缩放倍数值6、指定精度缩放缩放到指定精度7、精度设定精度设定是以采集精度设定,屏幕上一个像素大小,精度值范围为0.025~128之间,表示屏幕的一个像素对应实地0.3m8、撤销9、重做10、捕捉➢捕捉节点:捕捉点和节点➢捕捉线段:捕捉一条线的一段或几段➢捕捉节点线段:捕捉点,节点,线段➢捕捉点:捕捉点➢捕捉线:捕捉整条线➢全部:捕捉点、线段11、捕捉参数值设置:设置捕捉范围值,选中的实体显示情况Z勾掉为二维捕捉12、矩形选择:可以配合其他工具一起使用,拉框方式与cad类似,左上角向右下角拉框,选择整条包含在矩形框范围内的数据;右下角向左上角拉框,选择搭界数据。

(仅供参考)Phoenixpro使用说明(中文)

(仅供参考)Phoenixpro使用说明(中文)

PhoenixPro用户指南 V e r s i o n:1.00C r e a t e:2009-02-03目录序言 (1)第一部分软件简介 (2)第二部分界面说明 (3)第三部分操作说明 (5)3.1安装USB驱动 (5)3.2软件安装 (5)3.2.1 软件的完整性检查 (5)3.2.2 安装软件 (6)3.3量产准备工作 (8)3.3.1 使用HUB (8)3.3.2 不使用HUB (10)3.4软件启动 (10)3.4.1 打开量产软件 (10)3.4.2 配置软件 (10)3.4.3 启动软件 (11)3.5投入设备量产 (12)3.6软件关闭 (16)3.7软件升级 (17)第四部分注意事项 (19)4.1量产之前需注意的事项 (19)4.2量产过程中需注意的事项 (19)4.3出错处理 (20)第五部分USB驱动程序安装 (23)附A 常见问题及解决方案 (26)附B 快速操作指南 (27)序言1序言此手册是为PhoenixPro量产工具使用说明,它由软件简介、界面说明和操作指南等组成,全面介绍了量产工具的流程和使用方法。

本文档使用范围仅限于PhoenixPro量产工具使用用户。

文档结构:z软件简介z界面说明z操作说明z注意事项z驱动程序安装z FAQz快速指南2第一部分软件简介第一部分软件简介PhoenixPro量产工具通过样机与PC的连接的USB通道下载固件包到样机中。

整个量产工具由认证文件、固件包和量产软件组成,认证文件和固件包默认情况下存放在key文件夹中,PC端USB驱动程序默认存放在UsbDriver文件夹中。

为了提高生产效率,PhoenixPro量产工具支持无USB HUB和有USB HUB情况下多台样机升级,理论上最多可以支持127台样机同时升级,为了保证量产工具升级的正确性建议7台同时升级,建议不要超过8台,设备过多,量产速度会因为USB通道速度限制而下降。

7台同时升级且固件包大小为100M情况下,平均每个样机的升级时间约为10s。

Phoenix BIOS“硬刷”SLIC 2.1详细图文教程

Phoenix BIOS“硬刷”SLIC 2.1详细图文教程

Phoenix BIOS“硬刷”SLIC 2.1详细图文教程本帖最后由yh77 于2010-7-24 15:34 编辑实现Windows 7旗舰版OEM完美激活,需要:1,包含“SLIC 2.1”的BIOS;2,OEM证书;3,OEM密钥。

我机子是HP dv9715nr,用信息检测软件“everest”查看BIOS,类型为Phoenix;BIOS 版本 F.32。

官方最新的BIOS是windows 下的.exe更新程序“sp42853(F.32)/ewfrf/wc/softwareDownloadIndex?softwareitem=o b-69499-1&lc=en&dlc=en&cc=us&os=2093&product=3647014&sw_lang= ”,自带的是2.0 SLIC,因此必须修改BIOS文件为2.1 SLIC,并刷入PC中。

如下是我的刷机过程,学习参照了guoguo的博客文章/guoguo6688/blog/item/65dca9529465e5030cf3e3e4.html/in dex/5#comment 及网络上一些介绍:第一,制作包含2.1 SLIC的BIOS文件:Phoenix BIOS硬刷工具有一个RW选项无法省略,所以我们首先安装RW-everything软件(下载地址/file/uf4pln),运行,点击Access---->ACPI Tables,保存全部ACPI信息为一个rw格式文件备用。

RW.JPG然后下载上述链接的HP官方exe文件sp42853,解压后如下,exe文件解压.JPG然后按照guoguo博客的方法,用Phoenix BIOS硬刷工具把2.1SLIC和HP OEM 证书分别刷入30CFF32A.WPH和30CFF32AB.WPH。

如下是刷入30CFF32A.WPH的截图示例及说明,刷入30CFF32B.WPH是执行同样的过程,仅仅在原始BIOS那项选择30CFF32B.WPH就可以:刷入2.1SLIC.JPG由于PhoenixTool.exe使用.net编译,请安装 Framework 2.0或更高版本【使用方法】1、执行PhoenixTool.exe,打开要修改的原始BIOS文件30CFF32A.WPH;2、选择OEM制造商,HP的选其他;3、选择HP的SLIC2.1文件(.BIN结尾)和RW文件(之前生成的文件);4、选择HP的OEM证书HP.XRM-MS(在Phoenix SLICTool 工具的CERT 文件夹内);5、根据BIOS情况该软件会自动选择合适的方法,我这里自动为“动态”;6、可选择记录日志,以方便查看处理过程;7、执行。

红杉设备安装手册

红杉设备安装手册

MacroSAN MS2510/MS2520系列存储设备安装手册文档版本:V1.01杭州宏杉科技有限公司400-650-5527声明Copyright © 2010杭州宏杉科技有限公司及其许可者版权所有,保留一切权利。

未经杭州宏杉科技有限公司书面许可,任何单位和个人不得擅自摘抄本手册的内容,且不得以任何形式传播本手册。

本手册仅作为操作参考,由于软件版本升级或其他原因,本手册的内容可能滞后于最新的软件版本,杭州宏杉科技有限公司保留在没有任何通知或提示的情况下对本手册的内容进行修改的权利。

商标信息MacroSAN、ODSP、ODSP_MSC、ODSP_JMC、ODSP Scope、宏杉均为杭州宏杉科技有限公司的商标。

对于本手册中出现的其他公司的商标、产品标识及商品名称,由各自权利人拥有。

目录MacroSAN MS2510/MS2520系列存储设备 ........................................................................................... 1-1安装手册.................................................................................................................................................. 1-1声明.......................................................................................................................................................... 1-2商标信息 .................................................................................................................................................. 1-2目录.......................................................................................................................................................... 1-3图目录...................................................................................................................................................... 1-8表目录.................................................................................................................................................... 1-11 1前言..................................................................................................................................................... 1-131.1 读者对象.......................................................................................................................................... 1-131.2 适用范围.......................................................................................................................................... 1-131.3 文档结构.......................................................................................................................................... 1-131.4 文档约定.......................................................................................................................................... 1-141.4.1 手册描述约定........................................................................................................................ 1-141.4.2 其他约定 ............................................................................................................................... 1-141.5 术语................................................................................................................................................. 1-141.5.1 DSU ...................................................................................................................................... 1-141.5.2 EP ......................................................................................................................................... 1-151.5.3 FC ......................................................................................................................................... 1-151.5.4 GE ........................................................................................................................................ 1-151.5.5 GUI ....................................................................................................................................... 1-151.5.6 iSCSI .................................................................................................................................... 1-151.5.7 ODSP ................................................................................................................................... 1-151.5.8 ODSP Scope ........................................................................................................................ 1-151.5.9 SAN ...................................................................................................................................... 1-151.5.10 SAS .................................................................................................................................... 1-151.5.11 SATA .................................................................................................................................. 1-151.5.12 SP ....................................................................................................................................... 1-161.5.13 SPU .................................................................................................................................... 1-161.5.14 SSD .................................................................................................................................... 1-161.6 资料获取方式................................................................................................................................... 1-161.7 资料意见或建议反馈方式................................................................................................................. 1-16 2安全注意事项 ...................................................................................................................................... 2-162.1 通用安全注意事项 ........................................................................................................................... 2-162.2 用电安全注意事项 ........................................................................................................................... 2-172.3 静电安全注意事项 ........................................................................................................................... 2-172.4 激光安全注意事项 ........................................................................................................................... 2-172.5 电池安全注意事项 ........................................................................................................................... 2-172.6 磁盘使用注意事项 ........................................................................................................................... 2-182.7 搬运注意事项................................................................................................................................... 2-19 3产品介绍 ............................................................................................................................................. 3-193.1 产品概述.......................................................................................................................................... 3-193.2 产品规格.......................................................................................................................................... 3-203.2.1 SPU规格 .............................................................................................................................. 3-203.2.2 DSU规格.............................................................................................................................. 3-223.2.3 磁盘模块规格........................................................................................................................ 3-223.3 产品外观.......................................................................................................................................... 3-233.3.1 SPU外观 .............................................................................................................................. 3-233.3.2 DSU外观.............................................................................................................................. 3-293.3.3 电源模块外观........................................................................................................................ 3-323.3.4 磁盘模块外观........................................................................................................................ 3-333.4 产品指示灯 ...................................................................................................................................... 3-343.4.1 SP指示灯 ............................................................................................................................. 3-343.4.2 EP指示灯 ............................................................................................................................. 3-353.4.3 电源模块指示灯 .................................................................................................................... 3-353.4.4 风扇模块指示灯 .................................................................................................................... 3-363.4.5 电池模块指示灯 .................................................................................................................... 3-363.4.6 磁盘模块指示灯 .................................................................................................................... 3-36 4安装设备 ............................................................................................................................................. 4-374.1 安装规划.......................................................................................................................................... 4-374.2 安装流程.......................................................................................................................................... 4-374.3 安装前准备 ...................................................................................................................................... 4-384.3.1 准备安装场所........................................................................................................................ 4-384.3.2 准备机柜 ............................................................................................................................... 4-414.3.3 准备安装工具........................................................................................................................ 4-424.4 安装前检查 ...................................................................................................................................... 4-434.4.1 检查环境 ............................................................................................................................... 4-434.4.2 检查设备 ............................................................................................................................... 4-444.4.3 检查磁盘模块........................................................................................................................ 4-454.4.4 检查线缆 ............................................................................................................................... 4-454.5 安装机柜.......................................................................................................................................... 4-464.5.1 安装机柜 ............................................................................................................................... 4-464.5.2 安装机柜后检查 .................................................................................................................... 4-464.6 安装托架式滑道............................................................................................................................... 4-464.6.1 托架式滑道介绍 .................................................................................................................... 4-464.6.4 安装滑道后检查 .................................................................................................................... 4-494.7 安装SPU ......................................................................................................................................... 4-494.7.1 安装SPU流程 ...................................................................................................................... 4-494.7.2 安装SPU到机柜中............................................................................................................... 4-504.7.3 安装电池模块........................................................................................................................ 4-514.7.4 安装SPU面板 ...................................................................................................................... 4-524.7.5 安装SPU后检查 .................................................................................................................. 4-534.8 安装DSU ......................................................................................................................................... 4-534.8.1 安装DSU流程...................................................................................................................... 4-534.8.2 安装DSU到机柜中............................................................................................................... 4-544.8.3 安装DSU后检查 .................................................................................................................. 4-554.9 安装磁盘模块................................................................................................................................... 4-554.9.1 安装磁盘模块流程................................................................................................................. 4-554.9.2 安装SPU的磁盘模块 ........................................................................................................... 4-564.9.3 安装DSU1516/DSU1616的磁盘模块 .................................................................................. 4-574.9.4 安装DSU1525磁盘模块....................................................................................................... 4-584.9.5 安装磁盘假面板 .................................................................................................................... 4-594.9.6 安装磁盘模块后检查............................................................................................................. 4-604.10 安装线缆........................................................................................................................................ 4-604.10.1 布线注意事项...................................................................................................................... 4-604.10.2 安装线缆的流程 .................................................................................................................. 4-634.10.3 安装接地线.......................................................................................................................... 4-644.10.4 安装电源线.......................................................................................................................... 4-654.10.5 安装SAS线缆 .................................................................................................................... 4-674.10.6 安装SP业务接口线缆 ........................................................................................................ 4-714.10.7 安装SP管理网口线缆 ........................................................................................................ 4-734.10.8 安装客户端服务器的线缆.................................................................................................... 4-734.10.9 安装线缆后检查 .................................................................................................................. 4-73 5启动与配置设备 .................................................................................................................................. 5-745.1 设备上电前检查............................................................................................................................... 5-745.2 设备上电及启动............................................................................................................................... 5-745.2.1 DSU上电及启动 ................................................................................................................... 5-745.2.2 DSU启动后检查 ................................................................................................................... 5-755.2.3 SPU上电及启动 ................................................................................................................... 5-755.2.4 SPU启动后检查 ................................................................................................................... 5-755.3 设备配置.......................................................................................................................................... 5-765.3.3 设备配置 ............................................................................................................................... 5-775.4 设备关机及下电............................................................................................................................... 5-79 6安装与拆卸设备组件 ........................................................................................................................... 6-796.1 安装/拆卸SP ................................................................................................................................... 6-806.1.1 SP介绍................................................................................................................................. 6-806.1.2 安装SP ................................................................................................................................. 6-806.1.3 拆卸SP ................................................................................................................................. 6-816.2 安装/拆卸EP ................................................................................................................................... 6-816.2.1 EP介绍................................................................................................................................. 6-816.2.2 安装EP ................................................................................................................................. 6-826.2.3 拆卸EP ................................................................................................................................. 6-826.3 安装/拆卸电源模块 .......................................................................................................................... 6-836.3.1 电源模块介绍........................................................................................................................ 6-836.3.2 安装电源模块........................................................................................................................ 6-846.3.3 拆卸电源模块........................................................................................................................ 6-846.4 安装/拆卸SPU风扇模块 ................................................................................................................. 6-846.4.1 SPU风扇模块介绍................................................................................................................ 6-846.4.2 安装SPU风扇模块............................................................................................................... 6-856.4.3 拆卸SPU风扇模块............................................................................................................... 6-856.5 安装/拆卸DSU风扇模块................................................................................................................. 6-866.5.1 DSU风扇模块介绍................................................................................................................ 6-866.5.2 安装DSU风扇模块............................................................................................................... 6-866.5.3 拆卸DSU风扇模块............................................................................................................... 6-866.6 安装/拆卸电池模块 .......................................................................................................................... 6-876.6.1 电池模块介绍........................................................................................................................ 6-876.6.2 安装电池模块........................................................................................................................ 6-876.6.3 拆卸电池模块........................................................................................................................ 6-886.7 安装/拆卸磁盘模块 .......................................................................................................................... 6-886.7.1 磁盘模块介绍........................................................................................................................ 6-886.7.2 安装磁盘模块........................................................................................................................ 6-896.7.3 拆卸磁盘模块........................................................................................................................ 6-89 7常见故障处理 ...................................................................................................................................... 7-907.1 SP故障处理 .................................................................................................................................... 7-907.1.1 故障现象1:SP的告警指示灯闪烁或常亮 ........................................................................... 7-907.1.2 故障现象2:SP的运行指示灯常亮或常灭 ........................................................................... 7-917.1.3 故障现象3:SP启动过程中,LED数码管无法显示信息..................................................... 7-917.1.4 故障现象4:SP启动过程中,LED数码管停留在88 ........................................................... 7-917.1.5 故障现象5:SP启动过程中,LED数码管长时间停留在某个固定值................................... 7-927.2 EP故障处理 .................................................................................................................................... 7-927.2.1 故障现象1:告警指示灯闪烁或常亮 .................................................................................... 7-927.2.2 故障现象2:运行指示灯常亮或常灭 .................................................................................... 7-927.3 电源模块故障处理 ........................................................................................................................... 7-937.4 风扇模块故障处理 ........................................................................................................................... 7-947.5 电池模块故障处理 ........................................................................................................................... 7-947.6 其他故障处理................................................................................................................................... 7-94 8附录A.拇指螺钉的安装方法................................................................................................................ 8-95图目录图3-1 SPU前正视图 ............................................................................................................................. 3-23图3-2 SPU后正视图 ............................................................................................................................. 3-24图3-3 MS2510f/MS2520f的SP正视图................................................................................................ 3-25图3-4 MS2510i/MS2520i的SP正视图 ................................................................................................ 3-26图3-5 SPU风扇模块正视图 .................................................................................................................. 3-28图3-6 电池模块正视图 .......................................................................................................................... 3-28图3-7 DSU1516/DSU1616前正视图.................................................................................................... 3-29图3-8 DSU1525前正视图..................................................................................................................... 3-29图3-9 DSU1516后正视图..................................................................................................................... 3-30图3-10 DSU1516的EP正视图 ............................................................................................................ 3-31图3-11 DSU风扇模块正视图................................................................................................................ 3-32图3-12 电源模块正视图 ........................................................................................................................ 3-33图3-13 3.5英寸磁盘模块前面板 ........................................................................................................... 3-33图3-14 2.5英寸磁盘模块前面板 ........................................................................................................... 3-33图4-1 存储设备的安装规划示意图 ........................................................................................................ 4-37图4-2 存储设备的安装流程示意图 ........................................................................................................ 4-38图4-3 设备防拆封条示意图 ................................................................................................................... 4-45图4-4 托架式滑道(左侧滑道)示意图................................................................................................. 4-47图4-5 确定托架式滑道安装位置示意图................................................................................................. 4-47图4-6 安装左侧滑道示意图 ................................................................................................................... 4-48图4-7 安装拇指螺钉示意图 ................................................................................................................... 4-48图4-8 检查滑道示意图 .......................................................................................................................... 4-49图4-9 SPU安装流程示意图 .................................................................................................................. 4-50图4-10 安装SPU示意图....................................................................................................................... 4-51图4-11 检查SPU示意图....................................................................................................................... 4-51图4-12 安装电池模块示意图 ................................................................................................................. 4-52图4-13 安装SPU面板示意图 ............................................................................................................... 4-53图4-14 DSU安装流程示意图................................................................................................................ 4-54图4-15 安装DSU示意图 ...................................................................................................................... 4-54图4-16 检查DSU示意图 ...................................................................................................................... 4-55图4-17 磁盘模块安装流程图 ................................................................................................................. 4-56图4-18 SPU磁盘槽位编号示意图......................................................................................................... 4-56图4-19 3.5英寸磁盘模块示意图 ........................................................................................................... 4-57图4-21 DSU1516/DSU1616磁盘槽位编号示意图................................................................................ 4-58图4-22 DSU1525磁盘槽位编号示意图................................................................................................. 4-58图4-23 2.5英寸磁盘模块示意图 ........................................................................................................... 4-59图4-24 安装2.5英寸磁盘模块示意图................................................................................................... 4-59图4-25 安装磁盘假面板示意图.............................................................................................................. 4-60图4-26 固定线缆端子示意图 ................................................................................................................. 4-61图4-27 线缆捆扎示意图(一).............................................................................................................. 4-62图4-28 线缆捆扎示意图(二).............................................................................................................. 4-62图4-29 线缆捆扎示意图(三).............................................................................................................. 4-63图4-30 线缆安装流程示意图 ................................................................................................................. 4-63图4-31 接地线示意图 ............................................................................................................................ 4-64图4-32 松开设备接地端子的螺钉示意图............................................................................................... 4-64图4-33 安装接地线示意图..................................................................................................................... 4-65图4-34 电源线示意图 ............................................................................................................................ 4-65图4-35 安装电源线示意图..................................................................................................................... 4-66图4-36 电源线捆扎示意图..................................................................................................................... 4-66图4-37 Mini SAS线缆示意图................................................................................................................ 4-67图4-38 Mini SAS连接器(线缆端)示意图.......................................................................................... 4-68图4-39 高速SAS线缆弯曲半径示意图................................................................................................. 4-69图4-40 SAS线缆连接示意图 ................................................................................................................ 4-70图4-41 以太网线缆和接口示意图.......................................................................................................... 4-71图4-42 FC线缆和接口示意图 ............................................................................................................... 4-72图5-1 加载ODSP Scope界面.............................................................................................................. 5-77图5-2 ODSP Scope设备管理界面........................................................................................................ 5-78图5-3 设备初始配置流程示意图............................................................................................................ 5-79图6-1 安装/拆卸SP示意图................................................................................................................... 6-80图6-2 安装/拆卸EP示意图................................................................................................................... 6-82图6-3 安装/拆卸DSU电源模块示意图 ................................................................................................. 6-83图6-4 安装/拆卸SPU风扇模块示意图.................................................................................................. 6-85图6-5 安装/拆卸DSU风扇模块示意图 ................................................................................................. 6-86图6-6 安装/拆卸电池模块示意图........................................................................................................... 6-87图6-7 安装/拆卸3.5英寸磁盘模块示意图............................................................................................. 6-89图6-8 安装/拆卸2.5英寸磁盘模块示意图............................................................................................. 6-89图8-1 拇指螺钉示意图 .......................................................................................................................... 8-95。

斐海服务器安装说明

斐海服务器安装说明
17.查看指定区域所有打开的端口 firewall-cmd --zone=public --list-ports
18.在指定区域打开端口(记得重启防火墙)firewall-cmd --zone=public --add-port=80/tcp(永久生效再加上 --permanent)
说明:–zone 作用域
15.设置默认接口区域 firewall-cmd --set-default-zone=public(立即生效,无需重启)
16.更新防火墙规则 firewall-cmd --reload或firewall-cmd --complete-reload(两者的区别就是第一个无需断开连接,就是firewalld特性之一动态添加规则,第二个需要断开连接,类似重启服务)
–add-port=8080/tcp 添加端口,格式为:端口/通讯协议
–permanent #永久生效,没有此参数重启后失效
3.配置端口的命令格式如下
端口3306 tcp
firewall-cmd --zone=public --add-port=3306/tcp --permanent
范围端口 10002/10005 udp
FHSC和pureftpd数据库的导入依上而行.
4.赋予程序可执行权限
chmod +x/root/wks/Freiheit/nginx/nginx-1.10.3/build/sbin/nginx
chmod +x/home/fh/exe/bms
6.程序开机自启
编辑启动程序vi /etc/rc.local,在下面加入
11.拒绝所有包 firewall-cmd --panic-on
12.取消拒绝状态 firewall-cmd --panic-off
  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

Phoenix安装与使用文档作者:宋亚飞2015年3月27日目录Phoenix安装与使用文档 (1)目录 (1)描述 (2)Phoenix安装 (2)1、下载Phoenix (2)2、上传压缩包 (3)3、解压缩文件 (3)4、配置Phoenix (3)5、修改权限 (3)6、验证是否成功 (4)Phoenix使用 (4)1、建表 (4)2、导入数据 (5)3、查询数据 (5)查询1、查询全部记录 (5)查询2、查询记录总条数 (5)查询3、查询结果分组排序 (6)查询4、求平均值 (6)查询5、多字段分组,排序,别名。

(6)查询6、查询日期类型字段 (6)查询7、字符串,日期类型转换 (7)4、Phoenix基本shell命令 (7)5、用Phoenix Java api操作HBase (8)Phoenix支持 (11)描述现有hbase的查询工具有很多如:Hive,Tez,Impala,Shark/Spark,Phoenix等。

今天主要记录Phoenix。

phoenix,中文译为“凤凰”,很美的名字。

Phoenix是由开源的一个项目,后又捐给了Apache基金会。

它相当于一个Java中间件,提供jdbc连接,操作hbase数据表。

但是在生产环境中,不可以用在OLTP中。

在线事务处理的环境中,需要低延迟,而Phoenix在查询HBase时,虽然做了一些优化,但延迟还是不小。

所以依然是用在OLAT中,再将结果返回存储下来。

Phoenix官网上,对Phoenix讲解已经很详细了。

如果英语好,可以看官网,更正式一些。

Phoenix安装1、下载Phoenix下载地址:/apache/phoenix/phoenix与HBase版本对应关系Phoenix 2.x - HBase 0.94.xPhoenix 3.x - HBase 0.94.xPhoenix 4.x - HBase 0.98.1+我目前测试使用版本概况:Hadoop2.2.0--HBase0.98.2所以我可以用phoenix4.x。

下载的压缩包为phoenix-4.3.0-bin.tar.gz2、上传压缩包将phoenix-4.3.0-bin.tar.gz上传hbase集群的其中一个服务器的一个目录下我上传的目录为/usr/lib3、解压缩文件tar –zxvf phoenix-4.3.0-bin.tar.gz可看到有个phoenix-4.3.0-bin/目录,里面包含了Phoenix的所有文件。

4、配置Phoenix4.1、将phoenix-4.3.0-bin/目录下phoenix-core-4.3.0.jar、phoenix-4.3.0-client.jar拷贝到各个hbase的lib目录下。

4.2、重启hbase集群,使Phoenix的jar包生效。

4.3、将hbase的配置文件hbase-site.xml 放到phoenix-4.3.0-bin/bin/下,替换Phoenix原来的配置文件。

5、修改权限切换到下,修改psql.py和sqlline.py的权限为777命令:chmod 777 文件名6、验证是否成功6.1、在phoenix-4.3.0-bin/bin/下输入命令:./sqlline.py localhost如果看到如下界面表示启动成功。

6.2、输入!tables,查看都有哪些表。

红框部分是用户建的表,其他为Phoenix系统表,系统表中维护了用户表的元数据信息。

6.3、退出Phoenix。

输入!exit命令(PS:Phoenix早期版本如(2.11版本)需输入!quilt才可退出,目前高版本已改为!exit命令)Phoenix使用1、建表./psql.py localhost:2181 ../examples/stock_symbol.sql,其中../examples/stock_symbol.sql是建表的sql语句CREATE TABLE IF NOT EXISTS WEB_STAT (HOST CHAR(2) NOT NULL,DOMAIN VARCHAR NOT NULL,FEATURE V ARCHAR NOT NULL,DATE DATE NOT NULL,USAGE.CORE BIGINT,--usage指定列族名USAGE.DB BIGINT,--usage指定列族名STATS.ACTIVE_VISITOR INTEGERCONSTRAINT PK PRIMARY KEY (HOST, DOMAIN, FEATURE, DATE)--指定主键);2、导入数据命令:./psql.py -t WEB_STAT localhost:2181 ../examples/web_stat.csvPS:其中-t 后面是表名,../examples/web_stat.csv 是csv数据(注意数据的分隔符需要是逗号)。

3、查询数据首先使用sqlline查看(截图为部分列的数据),查询表名不区分大小写。

查询1、查询全部记录语句:select * from web_stat;查询2、查询记录总条数语句:select count(1) from web_stat;查询3、查询结果分组排序语句:select domain,count(1) as num from web_stat group by domain order by num desc;查询4、求平均值语句:select avg(core) from web_stat;查询5、多字段分组,排序,别名。

语句:select domain,count(1) as num,avg(core) as core,avg(db) as db from web_stat group by domain order by num desc;查询6、查询日期类型字段语句:select host,domain,date from web_stat where TO_CHAR(date)='2013-01-15 07:09:01.000';查询7、字符串,日期类型转换语句:select TO_DA TE('20131125','yyyyMMdd') from web_stat;Ps:输入的日期字符串会被转换为hbase表date的日期类型。

总结:Phoenix还支持了很多函数和sql语法,在这里不再一一列举。

更多请参考Phoenix支持部分4、Phoenix基本shell命令PS:以下,可能有部分命令在Phoenix更高版本中已失效,改为其他命令代替,请注意。

0: jdbc:phoenix:localhost> help!all Execute the specified SQL against all the current connections!autocommit Set autocommit mode on or off!batch Start or execute a batch of statements!brief Set verbose mode off!call Execute a callable statement!close Close the current connection to the database!closeall Close all current open connections!columns List all the columns for the specified table!commit Commit the current transaction (if autocommit is off)!connect Open a new connection to the database.!dbinfo Give metadata information about the database!describe Describe a table!dropall Drop all tables in the current database!exportedkeys List all the exported keys for the specified table!go Select the current connection!help Print a summary of command usage!history Display the command history!importedkeys List all the imported keys for the specified table!indexes List all the indexes for the specified table!isolation Set the transaction isolation for this connection!list List the current connections!manual Display the SQLLine manual!metadata Obtain metadata information!nativesql Show the native SQL for the specified statement!outputformat Set the output format for displaying results(table,vertical,csv,tsv,xmlattrs,xmlelements)!primarykeys List all the primary keys for the specified table!procedures List all the procedures!properties Connect to the database specified in the properties file(s)!quit Exits the program 此命令在Phoenix4.3版本已改为!exit!reconnect Reconnect to the database!record Record all output to the specified file!rehash Fetch table and column names for command completion!rollback Roll back the current transaction (if autocommit is off)!run Run a script from the specified file!save Save the current variabes and aliases!scan Scan for installed JDBC drivers!script Start saving a script to a file!set Set a sqlline variable5、用Phoenix Java api操作HBase开发环境准备:eclipse3.5、jdk1.7、window8、hadoop2.2.0、hbase0.98.0.2、phoenix4.3.01、从集群拷贝以下文件:core-site.xml、hbase-site.xml、hdfs-site.xml文件放到工程src下2、把phoenix的phoenix-4.3.0-client.jar和phoenix-core-4.3.0.jar添加到工程classpath3、配置集群中各节点的hosts文件,把客户端的hostname:IP添加进去4、在客户端host文件中加入集群的hostname和IP5、工程截图6、工程代码package com.byzoro.phoenix.test;import java.sql.Connection;import java.sql.DriverManager;import java.sql.ResultSet;import java.sql.Statement;public class Phoenix_Test {/*** 使用phoenix提供的api操作hbase读取数据* @author songyafei* @param args* @throws Throwable* @date 2015-03-25*/public static void main(String[] args) throws Throwable {try {//下面的驱动为Phoenix老版本使用2.11使用,对应hbase0.94+//Class.forName("com.salesforce.phoenix.jdbc.PhoenixDriver");//phoenix4.3用下面的驱动对应hbase0.98+Class.forName("org.apache.phoenix.jdbc.PhoenixDriver");} catch (Exception e) {e.printStackTrace();}//这里配置zookeeper的地址,可单个,也可多个。

相关文档
最新文档