机械设备参数表
施工组织设计机械设备配备参数表
日立液压挖掘机 日立液压挖掘机 日立液压挖掘机 日立液压挖掘机 日立液压挖掘机 日立液压挖掘机 日立液压挖掘机 日立液压挖掘机 日立液压挖掘机 日立液压挖掘机 日立液压挖掘机 日立液压挖掘机 混凝土搅拌车 混凝土搅拌车 混凝土搅拌车 混凝土搅拌车 混凝土搅拌车 混凝土搅拌车 混凝土搅拌车 混凝土搅拌车 混凝土搅拌车 混凝土搅拌车 混凝土搅拌车 混凝土搅拌车 混凝土搅拌车 混凝土搅拌车 混凝土搅拌车 混凝土搅拌车 混凝土搅拌车 宇通旋挖钻机 宇通旋挖钻机 宇通旋挖钻机 宇通旋挖钻机 宇通旋挖钻机 宇通旋挖钻机 宇通旋挖钻机
ABG6820 ABG7820B ABG8820B ABG9820 P8720B
瑞典 瑞典 瑞典 瑞典 瑞典
徐工压路机 XS系列全液压单钢轮振动压路机 XS系列全液压单钢轮振动压路机 XS系列全液压单钢轮振动压路机 XS系列全液压单钢轮振动压路机 XS系列全液压单钢轮振动压路机 XS系列全液压单钢轮振动压路机 XS系列全液压单钢轮振动压路机 XS系列全液压单钢轮振动压路机 XS系列全液压单钢轮振动压路机 XS系列全液压单钢轮振动压路机 XS系列全液压单钢轮振动压路机 XP系列轮胎压路机 XP系列轮胎压路机
长沙
238
SY312 C-8
长沙
259
SY312 C-8W
长沙
247
SZ312 C-8M
长沙
238
SY412 C-8
长沙
259
SY412 C-8W
长沙
247
SY415 C-8
长沙
280
SY415 C-8W
长沙
275
SZ415 C-8M
长沙
268
YTR300D
郑州
260
机械公司设备参数
工件最大 回转直径
工件最大加 工件最大加 主轴/工作台 最大刀具重 刀具容量 工直径 工长(高)度 最高负重(t) 量 1把/kg
8 15 2.6 60 60 60 60 12 12 30 2.5 30 30 30 40 40 40 40 40 60 7 7 7 15 15 20 24 24 24 24 24 30 4 4 4
主轴转速(r/min) 长度
100 125 325 325
工作范围（行程） X/Y/Z（mm）
560/560/630 1000/800/800 1000/800/1000 1250/1000/1000 1610/0/600 1788/0/704
型号
直径
200 205 250 250
额定功率/kw (30min/连续)
-120°~+30°/0/±360°
1-32 1-63 2-250
-50~3400/0/2000 横梁最大行程：3500 -20~1840/0/1250 横梁最大行程：2200 -20~1250/0/1000 横梁最大行程：1200
工作台
螺纹孔中心距 T槽：槽数×上槽宽×间距
螺纹规格
M16 M16 M16 M16
630×630 800×800
A2-8 A2-11 A2-11
车削主轴：30 铣削主轴：22 车削主轴：30 铣削主轴：37 车削主轴：45 铣削主轴：37
4000 3300 1600 第一主轴： 1000 第二主轴：600 5000 4000 4000 38-5000
12000 10000 10000 10000 12000 12000 12000 6000 50-20000
120
15-1500 20-4000 35-12000
机器设备评估常用数据及参数
机器设备评估常用数据及参数机器设备成新率评估参考表表3-1-1
机器设备安装调试费率参考指标占设备基价的%
注：1.专用生产线或成套设备试生产过程费用未包括在内;
2.设备费用另行计加;
3.锅炉安装包括砌炉、炉体保温等工程;
4.特殊情况安装或某些专用设备的安装可按实估算;
固定资产紧急评价参数、系数及参考数据
机器设备及房屋建筑物参考寿命年限
该资料依据国营企业固定资产分类折旧年限表规定而编,其中运输设备部分已按新文件规定作出了调整
通用设备
专用设备
建构筑物
鉴定房屋新旧程序的参考数据
砖混结构新旧程度鉴定表
砖木结构新旧程度鉴定表
简易结构新旧程度鉴定表
混合结构房屋损伤鉴定表
砖木结构房屋损伤鉴定表
其他简易结构房屋的评分标准见表
钢筋混凝土结构房屋的评分标准
机器设备评估常用数据与参数
1. 机器设备陈旧贬值参考表
关于进口设备评估中重置系数的计算方法和参数
每吨/时锅炉蒸发产量经济参考指标
注：热水锅炉以万kcal/h×10km为计算产量单位,可按40万kcal/h697.8km折算成1t/h;
国产设备运杂费占设备原价参考指标
进口设备运杂费占离、到岸价参考指标
全国工业用地出让最低标准。
机械设备明细表(模板)
机械设备明细表(模板)
一、设备信息
设备名称：[设备名称]
设备型号：[设备型号]
设备品牌：[设备品牌]
设备数量：[设备数量]
设备重量：[设备重量]
设备尺寸：[设备尺寸]
设备颜色：[设备颜色]
二、设备功能
设备主要功能：[设备主要功能]
设备辅助功能：[设备辅助功能]
设备适用范围：[设备适用范围]
三、设备组成
设备主要组成部分：
- [组成部分1]
- [组成部分2]
- [组成部分3]
...
四、设备技术参数
设备功率：[设备功率]
额定电压：[额定电压]
额定电流：[额定电流]
工作压力：[工作压力]
工作温度：[工作温度]
...
五、设备维护保养
设备保养周期：[设备保养周期]
设备保养方法：[设备保养方法]
设备故障排除方法：[设备故障排除方法] ...
六、设备安全性能
设备安全等级：[设备安全等级]
设备安全措施：
- [安全措施1]
- [安全措施2]
- [安全措施3]
...
七、设备运输和安装
设备运输方式：[设备运输方式]
设备安装要求：[设备安装要求]
...
以上为机械设备明细表的模板，根据实际情况填写相应内容。
请确认所填写内容准确无误，以确保设备信息记录的准确性和一致性。
机械设备主要技术参数
机械设备主要技术参数第一合同包：通勤车技术性能参数指标：技术性能参数指标：1、*发动机参数：（1）排量（L）：<3（2）功率：≥92/3600 KW/RPM*（3）发动机形式：四缸、直列、水冷、涡轮增压中冷、共轨柴油机（4）排放标准：欧III标准2、转向方式：动力转向3、前悬架：双摆臂扭杆弹簧独立悬架；后悬架：二级变刚性半椭圆形钢板弹簧，液压减震器4、制动方式：四轮盘式*5、座位数：176、其他配置：（1）一体化晶钻大灯（2）金属漆（3）三自由度可调节驾驶员座椅（4）防潜滑乘客座椅7、内饰：标准（灰色）航空仪表盘加“游戏棒式”操作系统8、车内CD、侧窗帘、车内安装10000大卡冷暖空调9、绿色隔热玻璃，左右门玻璃电动升降10、金属灰裙边及保险杠11、安全广角后视镜12、三重复合安全防撞车身13、安装安全长排警示灯（路政用警灯暴闪型）14、车身颜色应和路政车辆颜色及标志一致第二合同包：养护自卸车技术性能参数指标：1.整车性能：符合国家质量检测标准2.倾卸型式：后倾卸式3.底盘类型：载货汽车二类底盘4.驱动型式：4×2（后轮驱动）5.液压举升装置：齿轮油泵CB-E532、液压缸JL2TGE90×5006.发动机型式：直列四缸、水冷、增压中冷7.额定功率：85kW/3600(r/min)8.变速器：JC528T69.轮胎型号/数量：7.00R16LT/610.钢板弹簧片数：前：7；后：4+5（不少于）11.驾驶室型式：平头双排12.驾驶室准乘人数：2+313.额定载质量：1380（㎏）14.车箱内部尺寸：不小于3190×1800×400（长×宽×高㎜）15.接近角/离去角：27/17.516.前悬/后悬（mm）:1015/152517.车身颜色：公路养护标志色第三合同包：沥青搅拌机技术性能参数指标：40型移动强制式沥青搅拌设备（1台）1.整机要求:占地面积小，主机可牵引拖挂，移场就位安装周期短，操作简单，维护方便，稳定可靠，自动化、标准化程度高，适合于高等级沥青路面的铺筑和养护施工。
煤矿机电设备各种设备技术参数一机一档
无极绳绞车配套电机
YBK2-250M-6
功率
380/660
转速
沈阳实力电机有限公司
出厂日期
型号：QBZ-120
型号
410
7318
7318
7618
JWB 1200 60
1m/s 60 ф21.5mm
37KW 980r/min 2008.4
设备名称 扬程
使用风压 出厂日期 生产厂家
风动涡轮潜水泵
风动涡轮潜水泵 70m
Φ89×750×880 650
1475r/min 45.3/26.8A
型号：DSB-4-4,电压等级：660/1140额定电流：5.4/3.13A 生产厂商：分宜宏大煤矿电机 配套开关型号：QBZ-80
JS-40 型号：QBZ-120
DSJ型带式输送机
名称 输送速度 输送量 传动滚筒 卸载滚筒
托辊 生产厂商 三联辊 中间管子 配套电机型号 电压等级
40KW 1470r/min
JD-1.6调度绞车
设备名称
外层钢丝绳静张力
卷筒尺寸 总减速比 容绳量
外形尺寸（长宽高）
配套电机型号 转速
配套开关 安装部位 内齿轮 小齿轮架 内齿轮 大齿轮架 卷筒左侧 行星齿轮 支承座 大齿轮架
调度绞车
型号
16KN
电机功率
Φ318×400mm
钢丝绳直径
35
外层绳速
400M
JH-5 272mm 80米 ф15.5 0.17m/s 7.5KW 山东山防防爆电机厂
51314
DSJ型带Leabharlann 输送机名称 输送速度 输送量 生产厂商 传动滚筒 卸载滚筒
托辊 三联辊 中间管子 配套电机型号 电压等级 厂家 配套减速箱 配套开关
机械设备参数
3、实训台（1）梯形实训台80张及配套凳子240张形状与尺寸：高度700㎜，台面与隔板尺寸见下图。
台面：25㎜厚木板刷漆(或防火板贴面) 灰色(白色)隔板：18㎜防火板贴面(或优质三聚氢氨成形板)支架：钢制，台面与隔板空间高度为180mm要求：坚固耐用、耐搬抬。
（2）长条实训台10张及配套凳子50张喷塑高强度面板，金属支架，抗冲击、承重好、防潮防锈性能好、坚固耐用、美观大方。
尺寸：1200㎜×600㎜×800㎜4、实训室完善改造（1）气相色谱室气路、电路设计安装及实验台制作项目规格参数数量单位备注实验台12000*1200*800 12 米钢木结构，实心理化板台面10800*1200*800 10.8 米钢木结构，实心理化板台面角柜1500*1500*800 2 个钢木结构，实心理化板台面药品柜900*450*1800 4 个铝木结构电源插座10A六孔插座51 组电源线6平方350 米4平方120 米配电箱5路 1 个气路改造 1 宗安装费 1 宗（2）实训室黑板A.固定绿板26个1.边框：采用茶色铝合金边框，四角为ABS接角。
2.衬层：中间为高密度硬质泡沫经高科技胶水高压粘合，结构牢固，中间可用瓦楞纸、蜂窝纸，背面采用防锈镀锌板。
3.板材料：采用进口镀锌板面、经过高温烤漆而成，永不生锈、永不脱落。
4.写面颜色：墨绿色、亚光;表面粗糙：ral.6-3.2um;光泽度《12%；没有明显眩光。
5.写面材质：优质专用涂料，厚度0.21mm、硬度为6h-8h,漆层为0.025mm：板面平整度及防水性指标远优于纸板木框加衬层黑板。
6.潮性:十年内不得因空气温度变化发生扭曲、起包、变形、发霉、生锈、面漆脱落。
7.外观：书写面平整，涂层均匀，没有波纹、龟裂、针孔、气泡、斑痕、凹凸等缺陷8.绿板规格（框内尺寸）：4m×1.2mB.活动式带架双面磁性白板32个规格（框内尺寸）：2.4m×1.2m；一面白板一面绿板，或双面白板；专业的PET 白板膜，耐久，十年不变色，不粘色；防静电处理，下笔流畅，易写易擦；PVC 边框，ABS包角，笔槽和边框一体化；隐式包角，可以暗挂；白板架为铝合金材质，使白板可作多角度调节。
建筑工程施工机械设备表
建筑工程施工机械设备表建筑工程施工机械设备是指在建筑工程施工过程中使用的各种机械设备，包括起重机械、混凝土搅拌设备、爆破设备、打桩机械、挖掘机械、输送设备、砂石料加工设备等。
这些设备在建筑工程中起着至关重要的作用，可以提高施工效率、降低施工成本、保障工程质量等。
下面是一份建筑工程施工机械设备表，列出了常用的施工机械设备及其主要参数和用途：1. 起重机械1.1 塔式起重机- 最大起重量：10吨- 最大起吊高度：60米- 用途：用于在工地上进行物料的起升和搬运工作。
1.2 施工升降机- 载重量：2000公斤- 升降速度：约30米/分钟- 用途：用于将人员和材料快速升降到施工现场的高空位置。
2. 混凝土搅拌设备2.1 混凝土搅拌车- 搅拌容量：6立方米- 混凝土搅拌时间：约15分钟- 用途：用于混合和搅拌混凝土，保证混凝土的质量。
2.2 混凝土搅拌站- 生产能力：60立方米/小时- 搅拌料斗容量：3立方米- 用途：用于批量生产混凝土，适用于大型建筑工程。
3. 爆破设备3.1 液压爆破钻机- 钻孔直径：75毫米- 钻孔深度：30米- 用途：用于在岩石爆破前进行钻孔作业。
3.2 爆破器材- 炸药类型：乳化炸药- 爆破效果：控制爆破- 用途：用于进行岩石爆破作业，破坏岩石以便后续施工。
4. 打桩机械4.1 桩基设备- 打桩方式：振动式打桩- 最大打桩深度：20米- 用途：用于在地基处理中进行振动打桩，加固地基。
4.2 钻孔桩车- 钻孔直径：1米- 最大钻孔深度：40米- 用途：用于在地基处理中进行钻孔，为灌注桩打孔。
5. 挖掘机械5.1 履带式挖掘机- 额定功率：100千瓦- 最大挖掘深度：6米- 用途：用于在工地上进行土方开挖、边坡整理等作业。
5.2 轮式挖掘机- 铲斗容量：1.5立方米- 最大卸载高度：3米- 用途：用于在建筑工地上进行土方开挖、土方搬运等作业。
6. 输送设备6.1 塔式皮带机- 输送能力：1000吨/小时- 输送带宽度：800毫米- 用途：用于将材料从一个地点输送到另一个地点。
主要建筑机械设备配置表
主要建筑机械设备配置表
1. 介绍
本文档旨在提供一份主要建筑机械设备配置表，以便在项目中为相关人员提供配置建筑机械设备的参考。
本配置表列出了在建筑工程中最常用的主要机械设备及其基本参数。
2. 设备列表
2.1 起重设备
- 塔吊：高度、最大起重量、最大幅度
- 施工升降机：承载能力、最大升降速度、最大高度
- 千斤顶：承载能力、最大升降高度
- 车载起重机：最大起重量、最大幅度
2.2 运输设备
- 搅拌车：搅拌容量、最大行驶速度
- 自卸车：最大载重量、最大行驶速度
- 钻机：最大钻孔深度、最大钻孔直径
2.3 压实设备
- 单钢轮压路机：工作质量、振动频率
- 双钢轮压路机：工作质量、振动频率
- 振动压路机：工作质量、振动频率
2.4 砌筑设备
- 砼搅拌站：生产能力、搅拌时间
- 砌筑机：产能、最大砌筑高度
2.5 特殊设备
- 岩石切割机：最大切割深度、刀片直径
- 压砖机：生产能力、压制压力
- 窄巷道铺装机：最大铺装宽度、最大铺装速度
3. 注意事项
- 配置设备时，需根据具体建筑工程需求进行选择。
- 设备的参数需满足工程要求，并符合相关标准和法规。
- 在使用设备前，需进行设备检查和维护，确保其安全可靠。
以上为主要建筑机械设备配置表，供参考使用。
具体工程配置应根据实际情况进行调整和选择。
机器设备各项参数参考表
通用设备经济寿命年限参考表专用设备经济寿命年限参考表注：1.根据设备单价的大小及其体积重量及所处地区交通条件选定具体费率。
单价高、体积小、重量轻、交通方便地区的取低值，反之取高值。
2.特殊情况或用空运等可按实估算。
人民币存贷款利率调整表2011年4月6日表一机动车总成、部件价值权分参考表（英文版）Two regulations promulgated for implementation is in the party in power for a long time and the rule of law conditions, the implementation of comprehensive strictly strategic plan, implementation in accordance with the rules and discipline to manage the party, strengthen inner-party supervision of major initiatives. The two regulations supporting each other, the < code > adhere to a positive advocate, focusing on morality is of Party members and Party leading cadres can see, enough to get a high standard; < rule > around the party discipline, disciplinary ruler requirements, listed as "negative list, focusing on vertical gauge, draw the party organizations and Party members do not touch the" bottom line ". Here, the main from four square face two party rules of interpretation: the first part introduces two party Revised regulations the necessity and the revision process; the second part is the interpretation of the two fundamental principles of the revision of laws and regulations in the party; the third part introduces two party regulations modified the main changes and needs to grasp several key problems; the fourth part on how to grasp the implementation of the two regulations of the party. < code > and < Regulations > revised the necessity and revised history of the CPC Central Committee the amendment to the Chinese Communist Party members and leading cadres honest politics several guidelines > and < Chinese Communist Party discipline and Punishment Regulations > column 1 by 2015 to strengthenparty laws and regulations focus. Two party regulations revision work lasted a Y ears, pooling the wisdom of the whole party, ideological consensus, draw historical experience, respect for the wisdom of our predecessors, which reflects the unity of inheritance and innovation; follow the correct direction, grasp the limited goals, adhere to the party's leadership, to solve the masses of the people reflect a focus on the problem. The new revision of the < code > and < rule >, reflects the party's 18 and the eighth session of the third, the spirit of the fourth plenary session, reflecting the experience of studying and implementing the General Secretary Xi Jinping series of important speech, reflects the party's eighteen years comprehensive strictly practice. (a) revised two regulations of the party need of < the ICAC guidelines > in < in 1997 Leaders as members of the Communist Party of China clean politics certain criteria (Trial) > based on revised, the promulgation and implementation of January 2010, to strengthen the construction of the contingent of leading cadres play an important role. But with the party to manage the party strictly administering the deepening, has not been able to fully meet the actual needs. Content is too complicated, "eight prohibition, 52 are not allowed to" hard to remember, and also difficult to put into practice; the second is concisely positive advocated by the lack of prohibited provisions excessive, no autonomy requirements; the third is banned terms and discipline law, both with the party discipline, disciplinary regulationsrepeat and Criminal law and other laws and regulations repeat; the fourth is to "clean" the theme is not prominent, not for the existing problems, and is narrow, only needle of county-level leading cadres above. < rule > is in 1997 < Chinese Communist Party disciplinary cases (Trial) > based on revision, in December 2003 the promulgation and implementation, to strengthen the construction of the party play very important role. Along with the development of the situation, which many provisions have been unable to fully meet the comprehensive strictly administering the practice needs. One is Ji law, more than half of the provisions and criminal law and other countries laws and regulations Repetition; two is the political discipline regulations is not prominent, not specific, for violation of the party constitution, damage the authority of Party Constitution of misconduct lack necessary and serious responsibility to pursue; third is the main discipline for the leading cadres, does not cover all Party members. Based on the above situation, need to < the criterion of a clean and honest administration > and < rule > the two is likely to be more relevant regulations first amendment. By revising, really put the authority of Party discipline, the seriousness in the party tree and call up the majority of Party members and cadres of the party constitution of party compasses party consciousness. (II) two party regulations revision process the Central Committee of the Communist Party of China attaches great importance to two regulations revision . Xi Jinping, general books recorded in the FifthPlenary Session of the eighth session of the Central Commission for Discipline Inspection, on the revised regulations < > made clear instructions. According to the central deployment, the Central Commission for Discipline Inspection from 2014 under six months begin study two regulations revision. The Standing Committee of the Central Commission for Discipline Inspection 4 review revised. Comrade Wang Qishan 14 times held a special meeting to study two regulations revision, amendment clarifies the direction, major issues of principle, path and target, respectively held a forum will listen to part of the province (area) secretary of the Party committee, Secretary of the Discipline Inspection Commission, part of the central ministries and state organs DepartmentThe first party committee is mainly responsible for people, views of experts and scholars and grassroots party organizations and Party members. Approved by the Central Committee of the Communist Party of China, on 7 September 2015, the general office of the Central Committee of the Party issued a notice to solicit the provinces (autonomous regions, municipalities) Party, the central ministries and commissions, state ministries and commissions of the Party (party), the General Political Department of the military, every 3 people organization of Party of two regulations revision opinion. Central Commission for Discipline Inspection of extensive solicitation of opinions, careful study, attracting, formed a revised sent reviewers. In October 8 and October 12, Central Committee PoliticalBureau Standing Committee and the Political Bureau of the Central Committee After consideration of the two regulations revised draft. On October 18, the Central Committee of the Communist Party of China formally issued two regulations. Can say, two laws amendment concentrated the wisdom of the whole party, embodies the party. Second, < code > and < Regulations > revision of the basic principles of two party regulations revision work and implement the party's eighteen, ten eight plenary, the spirit of the Fourth Plenary Session of the Eleventh Central Committee and General Secretary Xi Jinping important instructions on the revised < low political criterion > and < Regulations >, highlighting the ruling party characteristics, serious discipline, the discipline quite in front of the law, based on the current, a long-term, advance as a whole, with Bu Xiuding independent < rule > and < rule >. Main principle is: first, adhere to the party constitution to follow. The constitution about discipline and self-discipline required specific, awaken the party constitution of party compasses party consciousness, maintaining the authority of the constitution. General Secretary Xi Jinping pointed out that "no rules, no side round. Party constitution is the fundamental law, the party must follow the general rules. In early 2015 held the eighth session of the Central Commission for Discipline Inspection Fifth Plenary Session of the 16th Central Committee, Xi Jinping again pointed out that constitution is the party must follow the general rules, but also the general rules." the revisionof the < code > and < rule > is Method in adhere to the regulations established for the purpose of combining rule of virtue is to adhere to the party constitution as a fundamental to follow, the constitution authority set up, wake up the party constitution and party rules the sense of discipline, the party constitution about discipline and self-discipline specific requirements. 4 second is to adhere to in accordance with the regulations governing the party and the party. The Party of rule of virtue "de", mainly refers to the party's ideals and beliefs, excellent traditional style. The revised the < code > closely linked to the "self-discipline", insisting on the positive initiative, for all members, highlight the "vital few", emphasized self-discipline, focusing on the morality, and the majority of Party members and the ideological and moral standards. The revised < > Ji method separately, Ji, Ji Y an to Method, as a "negative list", emphasizing the heteronomy, focusing on vertical gauge. Is this one high and one low, a positive reaction, the strict party discipline and practice results transformation for the integration of the whole party to observe moral and discipline requirements, for the majority of Party members and cadres provides benchmarking and ruler. Third, insist on to. In view of the problems existing in the party at the present stage, the main problems of Party members and cadres in the aspect of self-discipline and abide by the discipline to make clearly defined, especially the party's eighteen years strict political discipline and political rules, organization and discipline andto implement the central eight provisions of the spirit against the four winds and other requirements into Disciplinary provisions. Not one pace reachs the designated position, focusing on in line with reality, pragmatic and effective. After the revision of major changes, major changes in the < code > and < rule > modified and needs to grasp several key problems (a) < code > < code > adhere to according to regulations governing the party and party with morals in combination, for at the present stage, the leadership of the party members and cadres and Party members in existing main problems of self-discipline, put forward principles, requirements and specifications, showing Communists noble moral pursuit, reflected at all times and in all over the world ethics from high from low 5 common requirements. One is closely linked to the "self-discipline", removal and no direct relation to the provisions of . the second is adhere to a positive advocate, "eight prohibition" 52 are not allowed to "about the content of the" negative list moved into synchronization amendment < cases >. Three is for all the party members, will apply object from the leadership of the party members and cadres to expand to all Party members, fully embodies the comprehensive strictly required. The fourth is prominent key minority, seize the leadership of the party members and cadres is the key, and put forward higher requirements than the ordinary Party members. Five is to simplify, and strive to achieve concise, easy to understand, easy to remember. The revised < code > is the ruling Party since the first insists ona positive advocate forAll Party members and the self-discipline norms, moral declaration issued to all members of the party and the National People's solemn commitment. > < criterion of a clean and honest administration consists of 4 parts, 18, more than 3600 words. After the revision of the < code >, a total of eight, 281 words, including lead, specification and Party member cadre clean fingered self-discipline norms, etc. Part 3 members low-cost clean and self-discipline, the main contents can be summarized as "four must" "eight code". Lead part, reiterated on ideal and faith, fundamental purpose, the fine traditions and work style, noble sentiments, such as "four must" the principle of requirements, strong tone of self-discipline, The higher request for 6 and supervised tenet, the foothold in permanent Bao the party's advanced nature and purity, to reflect the revised standards requirements. Members of self-discipline norms around the party members how to correctly treat and deal with the "public and private", "cheap and rot" thrifty and extravagance "bitter music", put forward the "four norms". Party leader cadre clean fingered self-discipline norms for the leadership of the party members and cadres of the "vital few", around the "clean politics", from civil servant of the color, the exercise of power, moral integrity, a good family tradition and other aspects of the leadership of the party members and cadres of the "four norms" < > < norm norm. "The Party member's self-discipline norms" and "party members and leading cadre clean fingered self-discipline norms," atotal of eight, collectively referred to as the "eight". "Four must" and "eight" of the content from the party constitution and Party's several generation of leaders, especially Xi Jinping, general secretary of the important discussion, refer to the "three discipline and eight points for attention" statements, and reference some embody the Chinese nation excellent traditional culture essence of epigrams. (2) the revised regulations, the main changes in the revised Regulations > to fully adapt to the strictly requirements, reflects the according to the regulations governing the law of recognition of deepening, the realization of the discipline construction and Jin Ju. < rule > is party a ruler, members of the basic line and follow. And the majority of Party members and cadres of Party organizations at all levels should adhere to the bottom line of thinking, fear discipline, hold the bottom line, as a preventive measure, to keep the party's advanced nature and purity. 1, respect for the constitution, refinement and discipline. Revised < rule > from comprehensive comb physical constitution began, the party constitution and other regulations of the Party of Party organizations and Party discipline requirements refinement, clearly defined in violation of the party constitution will be in accordance with regulations to give the corresponding disciplinary action. The original 10 categories of misconduct, integration specification for political discipline, discipline, honesty and discipline masses Ji Law and discipline and discipline and other six categories, the content of < rule >real return to Party discipline, for the majority of Party members and listed a "negative list. 7 2, highlighting the political discipline and political rules. > < Regulations according to the stage of the discipline of outstanding performance, emphasizing political discipline and political rules, organization and discipline, in opposition to the party's leadership and the party's basic theory, basic line, basic program and basic experience, the basic requirement of behavior made prescribed punishment, increase the cliques, against the organization such as violation of the provisions, to ensure that the central government decrees and the Party of centralized and unified. 3, adhere to strict discipline in the law and discipline In front, Ji separated. Revised < Regulations > adhere to the problem oriented, do Ji separated. Any national law existing content, will not repeat the provisions, the total removal of 79 and criminal law, repeat the content of the public security management punishment law, and other laws and regulations. In the general reiterated that party organizations and Party members must conscientiously accept the party's discipline, die van comply with national laws and regulations; at the same time, to investigate violations of Party members and even criminal behavior of Party discipline and responsibility, > < Regulations distinguish five different conditions, with special provisions were made provisions, so as to realize the connection of Party discipline and state law. 4, reflect Wind building and anti-corruption struggle of the latest achievements. < rule > the party's eighteen yearsimplement the spirit of the central provisions of the eight, against the requirements of the "four winds" and transformation for disciplinary provisions, reflecting the style construction is always on the road, not a gust of wind. In the fight against corruption out of new problems, increase the trading rights, the use of authority relatives profit and other disciplinary terms. Prominent discipline of the masses, the new against the interests of the masses and ignore the demands of the masses and other disciplinary terms and make provisions of the disposition and the destruction of the party's close ties with the masses.Discipline to protect the party's purpose. 8 of these regulations, a total of three series, Chapter 15, 178, more than 24000 words, after the revision of the regulations a total of 3 series, Chapter 11, 133, 17000 words, divided into "general" and "special provisions" and "Supplementary Provisions" Part 3. Among them, add, delete, modify the provisions of the proportion of up to nearly 90%. 1, the general general is divided into five chapters. The first chapter to the regulations of the guiding ideology, principles and scope of application of the provisions, highlight the strengthening of the party constitution consciousness, maintenance the authority of Party Constitution, increase the party organizations and Party members must abide by the party constitution, Y an Centralized centralized, would examine at all levels of the amended provisions implementing and maintaining Party discipline, and consciously accept the party discipline,exemplary compliance with national laws and regulations. The second chapter of discipline concept, disciplinary action types and effects of the regulations, will be a serious warning from the original a year for a year and a half; increase the Party Congress representative, by leaving the party above (including leave probation) punishment, the party organization should be terminated its representative qualification provisions. The third chapter of the disciplinary rules of use prescribed in the discipline rectifying process, non convergence, not close hand classified as severely or heavier punishment. "Discipline straighten "At least eighteen years of five years, these five years is to pay close attention to the provisions of the central eight implementation and anti -" four winds ". The fourth chapter on suspicion of illegal party disciplinary distinguish five different conditions, with special provisions were made provisions, to achieve effective convergence of Party and country 9 method. < rule > the provisions of Article 27, Party organizations in the disciplinary review found that party members have committed embezzlement, bribery, dereliction of duty dereliction of duty and other criminal law act is suspected of committing a crime shall give cancel party posts, probation or expelled from the party. The second is < Regulations > Article 28 the provisions of Party organizations in the disciplinary review But found that party members are stipulated in the criminal law, although not involved in a crime shall be investigated for Party discipline and responsibility shouldbe depending on the specific circumstances shall be given a warning until expelled punishment. This situation and a difference is that the former regulation behavior has been suspected of a crime, the feeling is quite strict, and the latter for the behavior not involving crime, only the objective performance of the provisions of the criminal code of behavior, but the plot is a crime to slightly. < Regulations > the 29 provisions, Party organizations in the discipline review found that party members and other illegal behavior, affect the party's image, the damage to the party, the state and the people's interests, we should depend on the situation Seriousness given disciplinary action. The loss of Party members, seriously damaging the party's image of behavior, should be given expelled from the party. At this article is party member is in violation of the criminal law outside the other illegal acts, such as violates the public security administration punishment law, customs law, financial laws and regulations behavior. The fourth is < cases > Article 32 stipulates, minor party members and the circumstances of the crime, the people's Procuratorate shall make a decision not to initiate a prosecution, or the people's court shall make a conviction and exempted from criminal punishment shall be given within the party is removed from his post, probation or expelled from the party. Party members and crime, sheets were fined in accordance with For acts; the principal Ordinance amended the provisions of the preceding paragraph. This is the new content, in order to achieve Ji method effectiveconvergence. Five is < > the thirty third article 10 of the provisions, the Party member due to an intentional crime is sentenced to criminal law (including probation) sheets or additional deprivation of political rights; due to negligence crime and was sentenced to three years or more (excluding three years) a penalty, shall give expelled punishment. Due to negligence crime is convicted and sentenced to three years (including three years) in prison or be sentenced to public surveillance, detention, shall in general be expelled from the party. For the individual may not be expelled from the party, should control Approval. This is followed and retained the original > < Regulations the provisions of punishment party authorization rules and report to a level party organizations. For is "party members with criminal acts, and by the criminal punishment, generally should be expelled from the party". The fifth chapter of probationary Party member of the discipline and discipline after missing members of the treatment and punishment decisions, such as the implementation of the provisions, clear the related party discipline and punishment decision made after, for duties, wages and other relevant alteration formalities for the longest time. 2, sub sub section will the original regulations of10 categories of acts of violation of discipline integration revised into 6 categories, respectively, in violation of the punishments for acts of political discipline "in violation of discipline behavior of punishment" in violation of integrity of disciplinary action points "of violation punishments for actsof mass discipline" "the violation of work discipline, punishment" in violation of discipline of life behavior punishment "6 chapters. 3, annex" Supplementary Provisions "clear authority making supplementary provisions of, cases of interpretative organ, as well as regulations implementation time and retroactivity etc.. 11 (3) learning understanding > < regulations needs to grasp several key problems The first problem -- about the violation of political discipline behavior > < new ordinance chapter 6 the political discipline column for the six disciplines, that is the main opposition to Party leadership and the opposition of the basic theory, basic line, basic program and basic experience, basic requirements of misconduct made provisions of the disposition, especially the eighteen since the CPC Central Committee put forward the Yan Mingzheng treatment of discipline and political rules requirements and practical achievements transformation for Discipline article, increase the false debate central policies, cliques, against the organization review, make no discipline of the principle of harmony terms. These are the party's eighteen years in comprehensive strictly Process combined with the practice of rich content. (1) false debate the central policies and undermine the Party of centralized and unified the problem is made in accordance with the provisions of the party constitution. Constitution in general programme requirements adhere to democratic centralism is one of the requirements of the construction of the party must adhere to the four cardinal. Applicationof this principle is not only the party the basic organization principle and is also the mass line in party life, it requires that we must fully develop inner-party democracy, respect for the dominant position of Party members, safeguarding the Party member democratic rights, give full play to the enthusiasm and creativity of the party organizations at all levels and Party members, at the same time, also must implement the right concentration, ensure the party's mission < the chaos in unity and concerted action to ensure that the party's decision to get quickly and effectively implementing. The Party Central Committee formulated the major principles and policies, through different channels and ways, fully listen to the party organizations and Party members of the opinions and suggestions, but 12 is some people face to face not to say back blather "" will not say, after the meeting said, "" Taiwan does not say, and nonsense ", in fact, not only disrupt the people thought, some causing serious consequences, the damage to the Party of the centralized and unified, hinder the central policy implementation, but also a serious violation of the democratic system of principles. There is no doubt that shall, in accordance with the Regulations > 4 Specified in Article 6 to give the appropriate punishment. For did not cause serious consequences, to give criticism and education or the corresponding tissue processing. (2) about the destruction of the party's unity < New Regulations > the forty eighth to fifty second article, to damage Party's unity unified and violation of political discipline, punishment situationmade explicit provisions. Article 52 of the new "in the party get round group, gangs seek private gain, cliques, cultivate private forces or through the exchange of interests, for their own to create momentum and other activities to gain political capital, given a serious warning or withdraw from their party posts disposition; if the circumstances are serious, to give Leave a party to observation or expelled from the party. (3) on against the organization review of the provisions of the constitution, party loyalty honesty is party members must comply with the obligations. Members must obey the organization decision, shall not violate the organization decided encounters by asking questions to find organization, rely on the organization, shall not deceive the organization, against the organization. For example, after the investigation does not take the initiative to explain the situation, but to engage in offensive and defensive alliance, hiding the stolen money is against survey organization, is a violation of the behavior of political discipline. Article 24 of the original > < Regulations, although the provisions of the interference, hinder group review the behavior of the fabric can be severely or 13 Aggravated punishment, but did not put this kind of behavior alone as a discipline for qualitative amount of discipline. > < new regulations increase the Article 57, "anti organization review, one of the following acts, given a warning or serious warning; if the circumstances are relatively serious, giving removed from or placed on probation within the party post; if the circumstances are serious, give。
关于机械设备主要技术参数
机械设备主要技术参数第 1 合同包设备 1 ：通勤车数量： 8 辆技术参数：19 座，倒车雷达，驾驶员安全气囊，全座椅安全带，手动 5 速变速器，中控锁，外摆乘客门，中空玻璃，发动机型号 :相当于 3TZ(功率≥120/4600-5000，扭矩≥260/2600-3600)，油箱容积≥90升，国 IV 以上排放标准，ＣＤ音响，ＡＢＳ刹车系统， EBD制动力分配系统，独立后暖风，独立燃烧加热器，暖风高寒状态，行车记录仪带CPS 功能，车身长≥5990*2050*2680，整车质保期 3 年或 10 万公里以上。
设备 2 ：生活用车数量： 5 辆技术参数：长* 宽* 高：≥ 5345*1800*1760 ，轴距：≥ 3200，货箱尺寸≥ 1680*1640*480 ，油箱：≥70L，最大马力（ Ps）： 126，最大功率 (kW)： 93，最大扭矩 (N?m)：205，驱动方式：前置四驱，轮毂： 16 寸铝合金，前悬架种类：双横臂独立悬架，后悬架种类：钢板弹簧，助力种类：液压助力，前制动器种类：通风盘式，前后电动车窗。
设备 3 ：路政巡逻车数量： 6 辆技术参数：长* 宽* 高：≥ 4473*1706*1469 ，轴距：≥ 2603，油箱：≥ 55L，最大功率 (kW)： 81，最大功率转速 (rpm)：5800，最大扭矩 (N?m)： 155，驱动方式：前置前驱，前悬架种类：麦弗逊式独立悬架，后悬架种类：复合扭力非独立悬架，助力种类：电子助力，前制动器种类：通风盘式，正副驾驶双安全气囊，刹车防抱死 (ABS)，电子制动力分配系统 (EBD)，电动车窗。
设备 4 ：通信费管理用车数量： 7 辆技术参数：长* 宽* 高：≥ 4473*1706*1469 ，轴距：≥ 2603，油箱：≥ 55L，最大功率 (kW)：≥ 81，最大功率转速 (rpm)：5800，最大扭矩 (N?m)：155，驱动方式：前置前驱，前悬架种类：麦弗逊式独立悬架，后悬架种类：复合扭力非独立悬架，助力种类：电子助力，前制动器种类：通风盘式，正副驾驶双安全气囊，刹车防抱死 (ABS)，电子制动力分配系统(EBD)，电动车窗。
机械设计参数表
机械设计参数表
机械设计参数表是指机械设计中常用的一些参数，包括尺寸、材料、性能、加工工艺等方面。
机械设计师在设计机械设备时，需要根据具体情况选择合适的参数，以确保机械设备的设计合理、安全可靠、经济适用。
以下是一些常见的机械设计参数表:
- 机械零件的尺寸参数表：包括零件的直径、长度、半径、厚度等尺寸参数，以及相关的技术要求和标注方式。
- 机械材料的性能参数表：包括材料的密度、弹性模量、屈服强度、疲劳强度、硬度等性能参数，以及相关的加工工艺和热处理方式。
- 机械加工工艺参数表：包括机械零件的加工方式、加工工艺、加工刀具等参数，以及相关的加工效率和质量要求。
- 机械设备的性能参数表：包括机械设备的工作效率、能耗、噪音、振动等性能参数，以及相关的设计要求和技术要求。
- 机械设计的经济参数表：包括机械设计的生产成本、销售成本、利润等经济参数，以及相关的投资策略和融资方式。
机械设计参数表是机械设计师工作中必不可少的工具，它能够帮助设计师更好地把握机械设计的各个方面，提高设计质量，降低设计成本。
常用施工机械设备需要系数及功率因数表
常用施工机械设备需要系数及功率因数表
常用施工机械设备需要系数及功率因数表 序号负荷名称 需要系数 （Kn） 参考功率因数 cosφ （有详细参数时按 具体参数）10台 以下 10台 以上 1塔吊0.350.300.70 2砼输送泵0.800.70 3闪光对焊机0.450.350.70 4电渣压力焊机0.400.300.60 5交流电焊机0.500.400.60 6插 入式振动泵0.650.600.60 7降水泵0.600.500.80 8卷扬机、井架0.450.350.70 9钢筋冷拉机0.400.70 10钢筋切断机、弯曲机 0.300.70 11木工机械0.500.75 12照明 1.00 1.000.70 13砂浆、砼搅拌机0.700.60 14人货梯0.700.500.65 15其他负
塔吊型号及参数表
塔吊型号及参数表一、型号介绍塔吊是一种用于在建筑工地进行起重作业的机械设备，具有高度、力矩大、作业范围广等特点。
根据不同的结构和用途，塔吊可以分为多种型号。
本文将对几种常见的塔吊型号进行介绍，并提供详细的参数表。
二、型号一：平头塔吊1. 型号：QTZ80-50102. 技术参数：- 最大起重量：8吨- 最大起重半径：50米- 最大起重高度：40米- 起重力矩：800kN·m- 铁塔高度：30米- 铁塔标准截面尺寸：1.6m × 1.6m3. 特点：- 适用于中小型建筑工地的起重作业；- 起重量较轻，但起重半径和高度达到较远较高；- 结构紧凑，占地面积小，适用于施工现场空间有限的情况。
三、型号二：变幅塔吊1. 型号：QTZ63-52112. 技术参数：- 最大起重量：6吨- 最大起重半径：52米- 最大起重高度：40米- 起重力矩：630kN·m- 铁塔高度：30米- 铁塔标准截面尺寸：1.3m × 1.3m3. 特点：- 可变幅功能使其适用于各种复杂的建筑工地；- 具有较高的起重能力和灵活的起重半径；- 结构稳定，具有较好的起重性能和安全性。
四、型号三：平地移动塔吊1. 型号：QTG25-60152. 技术参数：- 最大起重量：2.5吨- 最大起重半径：60米- 最大起重高度：40米- 起重力矩：250kN·m- 移动速度：0-40m/min- 移动方式：轮胎移动3. 特点：- 能够平地移动，适用于需要频繁变换位置的工地； - 装备有专用的移动系统，能够迅速高效地进行移动； - 起重量适中，适用于小型建筑工地的起重作业。
五、型号四：独立式塔吊1. 型号：QTZ100-65152. 技术参数：- 最大起重量：10吨- 最大起重半径：65米- 最大起重高度：50米- 起重力矩：1000kN·m- 铁塔高度：45米- 铁塔标准截面尺寸：1.8m × 1.8m3. 特点：- 起重能力强，适用于大型建筑工地；- 结构稳定，能够承受较大的风压和风载；- 铁塔高度和截面尺寸较大，增加了稳定性和起重性能。
机械制造车加工设备参数快速查询表
250
卡盘规 格 （mm）
12
4﹟
22
202000
尾座顶 JOC进给 尾座行 尾座驱动 紧力范 速度英制 程 方式 围 (inch) （mm） (MPa)
伺服电 电机功 刀盘刀具 尾座锥孔 主轴转 机功率 率（Ｋ 数(把) 锥度 速r/min （Ｘ/ Ｗ） Ｚ）KW
0-49.6
液压
0.51.5
90
液压
主轴每 螺纹公 转刀架 制类别 进给量 （50 (64种） 种）mm 横向mm
14-19
螺纹英 制类别 （43 种）
53
模数 螺纹 种类
0.5-120 ±90°
33
500
中拖板 最大横 向行程 (mm)
240
100
主轴中 模数螺 心线至 刀架转盘 纹的模 刀具支 回转角度 数 承面距 离(mm)
上刀架 尾座套筒 最大行 直径(mm) 程(mm)
320
175
1000
160
30
5﹟
φ 75*1 :4
12
451980
机械制造车加工设备参数快速查询表
步进电 机静力 矩(纵向 Z 轴)(Nm) 步进电 快速移 快速 刀架进 刀架进 尾座顶 刀架电机 给最小 给最小 机静力 动纵向 移动 刀架工 刀架电 尖套筒 顶尖套筒 转速 矩(横向 (Z 横向 设定单 设定单 位 机功率W 直径 行程(mm) r/min 位(纵向 位(横向 X 轴)mm/m (X (mm) 轴)(Nm) in 轴)mm Z轴)mm X轴)mm
401800
12
6.5/8
460
床身上最 大工件回 转直径 (mm)
260
500
轴类：150
常用施工机械参数表(路、桥、隧).
塑料排水板履带式插板机
DJL30-25B
主架高度29m，打设深度25m，30kW，插管直径133mm，允许地面坡度2°
徐州鹏达桩基工程机械研究所
塑料排水板履带式插板机
|
DJL30-30C
主架高度34m，打设深度30m，37kW，插管直径153mm，允许地面坡度2°
徐州鹏达桩基工程机械研究所
上海金泰股份有限公司
履带式起重机
LS-218RH5
80t
日本住友
路拌灰土拌合机
—
WB400
298kW
徐州华晨
塑料排水板导轨式插板机
DJG30-20
主架高24m，打设深20m，30kW，插管直径133mm，允许地面坡度2°
徐州鹏达桩基工程机械研究所
塑料排水板履带式插板机
|
DJL30-20A
主架高度24m，打设深度20m，30kW，插管直径133mm，允许地面坡度2°
装载机
973
155kW,
美国卡特彼勒(Caterpillar)有限公司
履带式装载机
—
963C
119kW, 2～
美国卡特彼勒(Caterpillar)有限公司
履带式装载机
973C
157kW,～
美国卡特彼勒(Caterpillar)有限公司
装载机
）
ZL30F
105kW,斗容
成都工程机械有限公司
装载机
ZL35F
西安探矿机械厂
液压旋喷注浆泵
.
YPB-100/23
55kW，压力小于23MPa，排量100L/min
镇江长城注浆设备厂
液压旋喷注浆泵
YPB-130/26
挖机机械设备参数表
序号 1 2 3 4 5 6 7 8 设备名称 用途 挖掘机 挖掘机 挖掘机 挖掘机 挖掘机 挖掘机 挖掘机 推土机
挖淤泥 弃土地整理 挖淤泥 挖淤泥 挖淤泥 挖淤泥 装破碎头破冰
型号 斗山DH225LC-7 现代305LC PC210（小松） SH210（佳友） 230 265(徐工） 现代225-7C
数量 （台） 1 2 3 3 2 2 3 2
功率
耗能品种 柴油 柴油 柴油 柴油 柴油 柴油 柴油
耗油量/每小时 年耗小时量 备注 21-23升 25-28升 21-23升 20-22升 24-26升 24-26升 22-25升 21-25升 冬季施工油耗 会相应增加,柴 油
161.7KW
柴油
淤泥转运机械设备参数列表
序号 设备名称 用途 重型自卸汽 1 运输淤泥 车 型号 解放牌 CA3250P66K2L 数量 （台） 80 功率 耗能品种 耗油量/每百公 年行驶里程 备注 里 69-95升 冬季施工油耗 会相应增加柴 油为-35#
300-350马 柴油 力
水利工程机械设备表
水利工程机械设备表
序号
设备名称
型号
生产厂家
技术参数
1
挖土机
CAT 320D
美国卡特彼勒
动力总功率：121 kW
额定挖掘力矩：102 kN·m
2
土石方铲运机
SDLG LG936L
山东理工大学
额定载荷：3 t
额定运行容量：1.7 m³
3
混凝土搅拌机
SANY HZS60
三一重工
额定生产率：60 m³/h
配置电机功率：37 kW
4
混凝土泵车
XCMG HBT30C
徐工集团
最大排量：30 m³/h
最大送输压力：10 Mຫໍສະໝຸດ a5掘进机LOVOL FR300
福田工程机械
额定功率：194 kW
最大行进速度：3 km/h
以上是水利工程常用的一些机械设备表格。设备名称、型号、生产厂家和技术参数对于准确地选择和使用合适的设备至关重要。这些机械设备在水利工程中扮演着重要的角色，能够提高工作效率，降低劳动强度，并保证工程质量。