2015年国家出台29项能耗限额标准
国家发布的个单位产品能耗限额标准大全
附录9：国家发布的79个单位产品能耗限额标准汇编一、铁合金单位产品能源消耗限额（GB 21341-2008）（一）现有铁合金生产企业单位产品能耗限额限定值合金品种硅铁电炉锰铁锰硅合金高碳铬铁高炉锰铁产品规格FeSi75-AFeMn68C7.0 FeMn64Si18FeCr67C6.FeMn68C7.执行国家标准GB/T2272GB/T 3795 GB/T 4008 GB/T 5683 GB/T 3795 标准成分Si75 Mn65 Mn+Si82 Cr50 Mn65 单位产品冶炼电耗限额限定值（kW·h/t）≤8800 ≤2700 ≤4400 ≤3500焦炭1350kg/t单位产品综合能耗限额限定值[以电当量值0.1229kgce/（kW·h）计](kgce/t)≤1980 ≤790 ≤1030 ≤900≤1250 单位产品综合能耗限额限定值[以电等价值0.404kgce/（kW·h）计](kgce/t)≤4600 ≤1610 ≤2380 ≤1950备入炉矿品位—Mn38% Mn34% Cr2O340% Mn37%注入炉矿品位每升高降低1%，电耗限额值可降低升高值（kW·h/t）—≤60 ≤100≤80铬铁比≥2.2焦炭30kg/t（二）新建铁合金生产企业单位产品能耗限额准入值合金品种硅铁电炉锰铁锰硅合金高碳铬铁高炉锰铁产品规格FeSi75-AFeMn68C7.0 FeMn64Si18FeCr67C6.0FeMn68C7.执行国家标准GB/T 2272 GB/T 3795 GB/T 4008 GB/T 5683 GB/T 3795 标准成分Si75 Mn65 Mn+Si82 Cr50 Mn65 单位产品冶炼电耗限额准入值（kW·h/t）≤8500 ≤2600 ≤4200 ≤3200焦炭1320kg/t单位产品综合能耗限额准入值[以电当量值0.1229kgce/(kW·h)计](kgce/t)≤1910 ≤710 ≤990 ≤810≤1220 单位产品综合能耗限额准入值[以电等价值0.404kgce/(kW·h)计](kgce/t)≤4440 ≤1500 ≤2260 ≤1780备注入炉矿品位—Mn38% Mn34% Cr2O340% Mn37% 入炉矿品位每升高降低1%，电耗限额值可降低升高值（kW·h/t）—≤60 ≤100≤80铬铁比≥2.2焦炭30kg/t（三）铁合金单位产品能耗限额先进值合金品种硅铁电炉锰铁锰硅合金高碳铬铁高炉锰铁产品规格FeSi75-AFeMn68C7.0FeMn64Si18FeCr67C6.FeMn68C7.执行国家标准GB/T 2272 GB/T 3795 GB/T 4008 GB/T 5683 GB/T 3795 标准成分Si75 Mn65 Mn+Si82 Cr50 Mn65单位产品冶炼电耗限额先进值（kW·h/t）≤8300 ≤2300 ≤4000 ≤2800焦炭1280kg/t单位产品综合能耗限额先进值[以电当量值0.1229kgce/(kW·h)计](kgce/t)≤1850 ≤670 ≤950 ≤740 ≤1180单位产品综合能耗限额先进值[以电等价值0.404kgce/(kW·h)计](kgce/t)≤4320 ≤1360 ≤2150 ≤1600备注入炉矿品位—Mn38% Mn34% Cr2O340% Mn37% 入炉矿品位每升高降低1%，电耗限额值可降低升高值（kW·h/t）—≤60 ≤100≤80铬铁比≥2.2焦炭30kg/t二、电石单位产品能源消耗限额（GB 21343-2008）（一）现有电石生产装置单位产品能耗限额限定值项目指标单位产品综合能耗限额限定值（tce/t）≤1.20单位产品电炉电耗限额限定值（kW·h/t）≤3400 （二）新建电石生产装置单位产品能耗限额准入值项目指标单位产品综合能耗限额准入值（tce/t）≤1.10单位产品电炉电耗限额准入值（kW·h/t）≤3250 （三）电石生产装置单位产品能耗限额先进值项目指标单位产品综合能耗限额先进值（tce/t）≤1.05单位产品电炉电耗限额先进值（kW·h/t）≤3050三、合成氨单位产品能源消耗限额（GB 21344-2008）（一）现有合成氨生产企业单位产品能耗限额限定值原料类型单位产品综合能耗限额限定值（kgce/t）优质无烟块煤≤1900非优质无烟块煤、焦碳、型煤≤2200天然气、焦炉气≤1650（二）新建合成氨生产企业单位产品能耗限额准入值原料类型单位产品综合能耗限额准入值（kgce/t）优质无烟块煤≤1500非优质无烟块煤、焦碳、型煤≤1800天然气、焦炉气≤1150（三）合成氨生产企业单位产品能耗限额先进值原料类型单位产品综合能耗限额先进值（kgce/t）优质无烟块煤≤1500非优质无烟块煤、焦碳、型煤≤1800天然气、焦炉气≤1150四、黄磷单位产品能源消耗限额（GB 21345-2008）（一）现有黄磷装置单位产品能耗限额限定值单位产品综合能耗限额限定值（tce/t）单位产品电耗限额限定值（kW·h/t）单位产品电炉电耗限额限定值（kW·h/t）≤3.60 ≤14200 ≤13800注：当磷矿采用烧结和焙烧工艺时，单位产品综合能耗限额限定值增加0.9tce/t，单位产品电耗限额限定值增加800kW·h/t。
28项国家能源消耗限额标准
国家产品能源消耗限额标准1、水泥单位产品能源消耗限额GB16780-2007现有水泥生产企业水泥单位产品能源消耗限额限定值新建水泥生产企业水泥单位产品能源消耗限额限定值水泥生产企业水泥单位产品能源消耗限额先进值2、铜冶炼企业单位产品能源消耗限额GB21248-2007铜冶炼企业单位产品能源消耗限额准入值铜冶炼企业单位产品能源消耗限额先进值3、锌冶炼企业单位产品能源消耗限额GB21249-2007锌冶炼企业单位产品能源消耗限额限定值锌冶炼企业单位产品能源消耗限额准入值锌冶炼企业单位产品能源消耗限额先进值4、铅冶炼企业单位产品能源消耗限额GB21250-2007锌冶炼企业单位产品能源消耗限额限定值锌冶炼企业单位产品能源消耗限额准入值锌冶炼企业单位产品能源消耗限额先进值5、镍冶炼企业单位产品能源消耗限额GB21251-2007镍冶炼企业单位产品能源消耗限额限定值镍冶炼企业单位产品能源消耗限额准入值镍冶炼企业单位产品能源消耗限额先进值6、建筑卫生陶瓷单位产品能源消耗限额GB21252-2007建筑卫生陶瓷单位产品能源消耗限额限定值建筑卫生陶瓷单位产品能源消耗限额准入值建筑卫生陶瓷单位产品能源消耗限额先进值7、粗钢生产主要工序单位产品能源消耗限额GB21256-2007现有粗钢生产主要工序单位产品能源消耗限额限定值新建粗钢生产主要工序单位产品能源消耗限额准入值粗钢生产主要工序单位产品能源消耗限额先进值电力折标准煤系数当量值条件下[0.1229 kgce/t/(kW·h)]粗钢生产工序能耗限额参考值8、烧碱单位产品能源消耗限额GB21257-2007烧碱装置单位产品能源消耗限额限定值新建装置烧碱单位产品能源消耗限额准入值烧碱装置单位产品能源消耗限额先进值9、常规煤发电机组单位产品能源消耗限额GB21258-2007单位产品能耗限额限定值基础值新建机组单位产品能耗限额准入值现有机组单位产品能耗限额先进值※请参考《燃烧成分修正系数》、《当地气温修正系数》、《冷却方式修正系数》、《机组负荷修正系数》、《机组启停调峰修正系数》、《烟气脱硫修正系数》10、平板玻璃单位产品能源消耗限额GB21340-2008现有平板玻璃生产企业单位产品能耗限额限定值新建平板玻璃生产企业单位产品能耗限额准入值平板玻璃单位产品能耗限额先进值11、铁合金单位产品能源消耗限额GB21341-2008现有铁合金生产企业单位产品能耗限额限定值新建铁合金生产企业单位产品能耗限额准入值铁合金单位产品能耗限额先进值12、焦碳单位产品能源消耗限额GB21342-2008电力折标准煤系数为当量值时焦碳单位产品能耗限额参考值13、电石单位产品能源消耗限额GB21343-2008电石单位产品能源消耗限额14、合成氨单位产品能源消耗限额GB21344-2008合成氨生产企业单位产品能源消耗限额15、黄磷单位产品能源消耗限额GB21345-2008现有黄磷装置单位产品能耗限额限定值新建黄磷装置单位产品能耗限额准入值黄磷单位产品能耗限额先进值16、电解铝企业单位产品能源消耗限额GB21346-2008电解铝企业单位产品能源消耗限额镁冶炼企业单位产品能源消耗限额18、锡冶炼企业单位产品能源消耗限额GB21348-2008现有锡冶炼企业单位产品能源消耗限额限定值新建锡冶炼企业单位产品能源消耗限额准入值锡冶炼企业单位产品能源消耗限额先进值以硫化锑、硫氧混合锑精矿为原料的锑冶炼企业单位产品综合能耗限额限定值以硫化锑、硫氧混合锑精矿为原料的锑冶炼企业单位产品综合能耗限额准入值以硫化锑、硫氧混合锑精矿为原料的锑冶炼企业单位产品综合能耗限额先进值以脆硫铅锑精矿为原料的锑冶炼企业单位产品综合能耗限额限定值以脆硫铅锑精矿为原料的锑冶炼企业单位产品综合能耗限额准入值以脆硫铅锑精矿为原料的锑冶炼企业单位产品综合能耗限额先进值20、铜及铜合金管材单位产品能源消耗限额GB21350-2008现有铜及铜合金管材加工企业单位产品能耗限额限定值新建铜及铜合金管材加工企业单位产品能耗限额准入值铜及铜合金管材加工企业单位产品能耗限额先进值21、铝合金建筑型材单位产品能源消耗限额GB21351-2008铝合金建筑型材生产企业单位产品能耗限额限定值新建铝合金建筑型材生产企业单位产品能耗限额准入值铝合金建筑型材生产企业单位产品能耗限额先进值22、炭素单位产品能源消耗限额GB21370-2008石墨电极、炭电极和炭块单位产品综合能耗限额限定值石墨电极、炭电极和炭块单位产品综合能耗限额准入值石墨电极、炭电极和炭块单位产品综合能耗限额先进值炭素生产中焙烧和石墨化工序单位产品综合能耗限额限定值炭素生产中焙烧和石墨化工序单位产品综合能耗限额准入值炭素生产中焙烧和石墨化工序单位产品综合能耗限额先进值23、氧化铝企业单位产品能源消耗限额GB 25327-201024、25、铝电解用石墨质阴极炭块单位产品能源消耗限额GB25324-2010现有铝电解用阴极炭块企业单位产品能耗限额限定值新建铝电解用阴极炭块企业单位产品能耗限额准入值铝电解用阴极炭块企业单位产品能耗限额先进值26、铝电解用预焙阳极单位产品能源消耗限额GB-25325-2010现有铝电解用预焙阳极企业单位产品工序综合能耗限额限定值27、铝及铝合金轧、拉制管、棒材单位产品能源消耗限额 GB 25326-2010新建轧、拉制管材和轧、拉制棒材生产企业单位产品能耗限额准入值28、铝及铝合金热挤压棒材单位产品能源消耗限额GB 26756-2011。
中华人民共和国地方标准备案公告2014年第2号(总第170号)－－依法备案地方标准164项的公告
2011-04-01
北京市质量技术监督局
34
40543-2014
DB11/T 765.1-2010
档案数字化规范 第1部分：总则
2010-12-28
2011-04-01
北京市质量技术监督局
35
40544-2014
DB11/T 762-2010
电子政务业务描述规范
2010-12-28
2013-09-30
2013-11-30
江苏省质量技术监督局
62
40537-2014
DB32/ 2542-2013
粘胶（长、短）纤维能耗限额标准
2013-09-29
2013-11-29
江苏省质量技术监督局
63
40538-2014
DB32/ 2543-2013
铝合金铸件可比单位综合能耗限额及计算方法
2013-12-31
2014-03-01
云南省质量技术监督局
45
40519-2014
DB53/T 544.1-2013
行政审批事项办事指南编写规范 第1部分：基本要求
2013-12-31
2014-03-01
云南省质量技术监督局
46
40520-2014
DB53/T 544.2-20源自3行政审批事项办事指南编写规范 第2部分：要素编写；
2008-05-28
2008-07-01
北京市质量技术监督局
38
40547-2014
DB11/T 553.2-2008
政务信息资源共享交换平台技术规范 第2部分：政务信息资源目录管理
2008-05-28
2008-07-01
北京市质量技术监督局
《热电联产能效能耗限额及计算方法》材料解读
热电联产能效能耗限额及计算方法
1 范围 本标准规定了热电厂在生产过程中能量消耗的限额标准及计算方法。 本标准适用于投产六个月以后的热电厂。 2 典型机组 背压机组： B12-3.43/0.196； 单抽供热机组：C25-8.83/0.49 C135/N150-13.24/535/535/0.981 C140/N210-12.75/535/535/0.981 C250/N300-16.67/537/537/0.4 C300/N350-16.67/538/538/0.8 双抽供热机组：CC50-8.83/4.119/1.275 CC100-8.83/0.98/0.3 CC100/N135/13.2/535/535/0.98 CC140/N200-12.75/1.08/0.245 循环水/抽汽供热机组：C25-4.9/0.981。
热电联产能效能耗限额及计算方法
1 范围 本标准规定了热电厂在生产过程中能量消耗的限额标准及计算方法。 本标准适用于投产六个月以后的热电厂。 1 热电联产电厂（热电厂） 1.3 类别
e)低真空循环水供热机组
这是一种人为降低凝汽式汽轮机组的真空，提高循环水出口温度，实现 对城市居民采暖供热的机组。
热电联产能效能耗限额及计算方法
热电联产能效能耗限额及计算方法
1 范围 本标准规定了热电厂在生产过程中能量消耗的限额标准及计算方法。 本标准适用于投产六个月以后的热电厂。 1 热电联产电厂（热电厂） 1.3 类别 d) 燃汽一蒸汽联合循环供热机组 这种燃气一蒸汽联合循环供热机组的优点是：①供电效率高，已远远超 过燃煤的超临界参数的蒸汽轮机电站。②投资费用低。建设周期短，资金利 用最有效，用地用水都比较小。③运行高度自动化，每天都能起停，便于快 速地“黑启动”。④运行的可用率高达85%-95%.⑥对环境污染小，一般来说， 无飞尘，SOx,NOx,也很少，特别是在燃用天然气时，还可以大大减少C02的排 放量.
DB33 760-2015 饭店单位综合能耗、电耗限额及计算方法
E j=
E ........................................ (2) M
式中： Ej ——饭店单位综合能耗，单位：千克标准煤每平方米（kgec/m2） ； E ——饭店综合能耗，单位：千克标准煤（kgce） ； 2 M ——饭店总建筑面积，单位：平方米（m ） 。
4
龙牛网 下载
饭店单位综合能耗 （kgce/m ） ≤40 ≤35 ≤30
2
饭店类型 按五星级或金鼎级标准设计和建设 按四星级或银鼎级标准设计和建设 按三星级及以下标准设计和建设
饭店单位电耗 （kWh/m ） ≤145 ≤105 ≤95
2
注：表中所指星级是依据GB/T 14308进行评定的饭店等级。表中所指金鼎级、银鼎级是依据 DB33/T 871进行评定 的饭店类型。
E = ∑ (ei × pi ) ..................................... (1)
i =1
n
式中： E ——饭店综合能耗，单位：千克标准煤（kgce） ； ei ——饭店统计期内经营活动消耗的第 i 种能源实物量，单位：采用各实物——饭店消耗的能源种数。 5.2.2 饭店单位综合能耗的计算 饭店单位综合能耗等于计划统计期内（以年为单位）的饭店综合能耗除以饭店建筑面积。以每平方 米千克标准煤为单位，按照公式（2）进行计算。
1
DB33/ 760—2015 饭店在计划统计期内（以年为单位），将经营过程中实际消耗的各种能源实物量按照规定的计算方 法和单位分别折算后的总和，单位为千克标准煤。 3.4 饭店总电耗 hotel gross electricity consumption 饭店在计划统计期内（以年为单位）消耗的总电量，单位为千瓦时。 3.5 饭店单位综合能耗 hotel comprehensive energy consumption per square meter of floor area 饭店在计划统计期内（以年为单位），每平方米建筑面积所消耗的综合能耗，单位为千克标准煤每 平方米。 3.6 饭店单位电耗 hotel electricity consumption per square meter of floor area 饭店在计划统计期内 （以年为单位） ， 每平方米建筑面积所消耗的总电量， 单位为千瓦时每平方米。 3.7 饭店可比单位综合能耗 Hotel comparable comprehensive energy consumption per square meter of floor area 饭店在计划统计期内（以年为单位），按照规定的计算方法，将影响饭店单位综合能耗的因素分别 进行修正后的单位综合能耗值，单位为千克标准煤每平方米。 4 饭店可比单位综合能耗、电耗限额 4.1 现有饭店企业可比单位综合能耗、电耗限额 应符合表1的要求。 表1 现有饭店可比单位综合能耗、电耗限额
DB11 T 1234-2015生活垃圾焚烧处理能源消耗限额
ICS13.030.40J 88备案号:47603-2015 DB11 北京市地方标准DB11/T 1234—2015生活垃圾焚烧处理能源消耗限额The norm energy consumption per unit incineration treatment of municipalsolid waste2015-09-23发布2016-01-01实施北京市质量技术监督局发布目次前言 (II)1 范围 (1)2 规范性引用文件 (1)3 术语和定义 (1)4 技术要求 (2)4.1 现有焚烧厂能耗限定值 (2)4.2 新建焚烧厂能耗准入值 (2)4.3 焚烧厂能耗先进值 (3)4.4 影响因素修正系数 (3)5 统计范围和计算方法 (5)5.1 能耗统计范围 (5)5.2 能耗计算方法 (5)6 节能管理 (6)6.1 节能基础管理 (6)6.2 节能技术管理 (6)附录A（资料性附录）常用能源品种现行参考折标准煤系数 (7)I前言本标准按照GB/T 1.1-2009给出的规则起草。
本标准由北京市市政市容管理委员会提出并归口。
本标准由北京市市政市容管理委员会组织实施。
本标准起草单位：北京环卫集团环境研究发展有限公司、北京高安屯垃圾焚烧有限公司、中国航空规划设计公司、杭州新世纪能源工程有限公司、无锡华光锅炉股份有限公司。
本标准主要起草人：曹作忠、孙永鑫、陈芳、杨子迎、王树方、何亮、张晨光、温冬、章夏夏、陈晓峰、张星群、王政、王炳胜、车卫彤、卢炜。
II生活垃圾焚烧处理能源消耗限额1 范围本标准规定了生活垃圾焚烧处理能源消耗（以下简称能耗）限额的技术要求、统计范围和计算方法、节能管理。
本标准适用于垃圾焚烧厂能耗的计算、考核，以及对新建项目的能耗控制。
2 规范性引用文件下列文件对于本文件的应用是必不可少的。
凡是注日期的引用文件，仅所注日期的版本适用于本文件。
凡是不注日期的引用文件，其最新版本（包括所有的修改单）适用于本文件。
国办发〔2015〕16号《国务院办公厅关于加强节能标准化工作的意见》
国务院办公厅关于加强节能标准化工作的意见国办发〔2015〕16号各省、自治区、直辖市人民政府，国务院各部委、各直属机构：节能标准是国家节能制度的基础，是提升经济质量效益、推动绿色低碳循环发展、建设生态文明的重要手段，是化解产能过剩、加强节能减排工作的有效支撑。
为进一步加强节能标准化工作，经国务院同意，现提出以下意见。
一、总体要求（一）指导思想。
全面贯彻落实党的十八大和十八届二中、三中、四中全会精神，认真落实党中央、国务院的决策部署，充分发挥市场在资源配置中的决定性作用，更好发挥政府作用，创新节能标准化管理机制，健全节能标准体系，强化节能标准实施与监督，有效支撑国家节能减排和产业结构升级，为生态文明建设奠定坚实基础。
（二）基本原则。
坚持准入倒逼，加快制修订强制性能效、能耗限额标准，发挥准入指标对产业转型升级的倒逼作用。
坚持标杆引领，研究和制定关键节能技术、产品和服务标准，发挥标准对节能环保等新兴产业的引领作用。
坚持创新驱动，以科技创新提高节能标准水平，促进节能科技成果转化应用。
坚持共同治理，营造良好环境，形成政府引导、市场驱动、社会参与的节能标准化共治格局。
（三）工作目标。
到2020年，建成指标先进、符合国情的节能标准体系，主要高耗能行业实现能耗限额标准全覆盖，80%以上的能效指标达到国际先进水平，标准国际化水平明显提升。
形成节能标准有效实施与监督的工作体系，产业政策与节能标准的结合更加紧密，节能标准对节能减排和产业结构升级的支撑作用更加显著。
二、创新工作机制（四）建立节能标准更新机制。
制定节能标准体系建设方案和节能标准制修订工作规划，定期更新并发布节能标准。
建立节能标准化联合推进机制，加强节能标准化工作协调配合。
完善节能标准立项协调机制，每年下达1-2批节能标准专项计划，急需节能标准随时立项。
完善节能标准复审机制，标准复审周期控制在3年以内，标准修订周期控制在2年以内。
创新节能标准技术审查和咨询评议机制，加强能效能耗数据监测和统计分析，强化能效标准和能耗限额标准实施后评估工作，确保强制性能效和能耗指标的先进性、科学性和有效性。
73项单位产品能耗限额标准
2014-09-01
56
GB 30250-2013
乙烯装置单位产品能源消耗限额
2014-09-01
57
GB 21346-2013
电解铝企业单位产品能源消耗限额
2014-09-01
58
GB 30251-2013
炼油单位产品能源消耗限额
2014-09-01
59
GB 30252-2013
2013-10-01
32
GB 29436.1-2012
甲醇单位产品能源消耗限额 第1部分：煤制甲醇
2013-10-01
33
GB 29437-2012
工业冰醋酸单位产品能源消耗限额
2013-10-01
34
GB 29438-2012
聚甲醛单位产品能源消耗限额
2013-10-01
35
GB 29439-2012
煤基活性炭单位产品能源消耗限额
2014-11-01
52
GB 29995-2013
兰炭单位产品能源消耗限额
2014-11-01
53
GB 29996-2013
水煤浆单位产品能源消耗限额
2014-11-01
54
GB 21258-2013
常规燃煤发电机组单位产品能源消耗限额
2014-09-01
55
GB 21340-2013
合成氨单位产品能源消耗限额
2008-06-01
9
GB 21345-2008
黄磷单位产品能源消耗限额
2008-06-01
10
GB 21348-2014
锡冶炼企业单位产品能源消耗限额
2015-01-01
热电联产单位产品能源消耗限额
热电联产单位产品能源消耗限额1 范围本标准规定了常规燃煤抽凝式热电联产机组单位产品能源消耗（简称能耗）限额的技术要求、统计范围和计算方法、节能管理与措施。
本标准适用于常规燃煤抽凝式热电联产机组单位产品能耗的计算、考核，以及对新（改、扩）建机组的能耗控制。
本标准不适用于资源综合利用机组和背压式热电联产机组。
2 规范性引用文件下列文件对于本文件的应用是必不可少的。
凡是注日期的引用文件，仅注日期的版本适用于本文件。
凡是不注日期的引用文件，其最新版本（包括所有的修改单）适用于本文件。
GB/T 2589 综合能耗计算通则GB/T 12497 三相异步电动机经济运行GB/T 12723 单位产品能源消耗限额编制通则GB/T 13462 电力变压器经济运行GB/T 13469 离心泵、混流泵、轴流泵和旋涡泵系统经济运行GB/T 13470 通风机系统经济运行GB 17167 用能单位能源计量器具配备和管理通则GB 18613 中小型三相异步电动机能效限定值及能效等级GB 19153 容积式空气压缩机能效限定值及能效等级GB 19761 通风机能效限定值及能效等级GB 19762 清水离心泵能效限定值及节能评价值GB 20052 三相配电变压器能效限定值及能效等级GB/T 21369 火力发电企业能源计量器具配备和管理要求GB/T 23331 能源管理体系要求GB 24790 电力变压器能效限定值及能效等级GB 28381 离心鼓风机能效限定值及节能评价值GB 30254 高压三相笼型异步电动机能效限定值及能效等级GB 50049 小型火力发电厂设计规范GB 50660 大中型火力发电厂设计规范DL/T 904-2015 火力发电厂技术经济指标计算方法DL/T 1052 节能监督技术导则DL/T 1365-2014 名词术语电力节能3 术语和定义GB/T 12723、DL/T 1365-2014、DL/T 904-2015 界定的以及下列术语和定义适用于本文件。
2015年国家出台29项能耗限额标 准
2015年国家出台单位产品能源消耗限额标准汇总表序号标准名称标准编号实施日期1苯乙烯单位产品能源消耗限额GB32053-2015实施日期2016-10-012电弧炉冶炼单位产品能源消耗限额GB32050-2015实施日期2016-10-013金矿开采单位产品能源消耗限额GB32032-2015实施日期2016-10-014电工用铜线坯单位产品能源消耗限额GB32046-2015实施日期2016-10-015黄磷单位产品能源消耗限额GB2134-2015实施日期2016-10-016电石单位产品能源消耗限额GB21343-2015实施日期2016-10-017合成氨单位产品能源消耗限额GB21344-2015实施日期2016-10-018糖单位产品能源消耗限额GB32044-2015实施日期2016-10-019啤酒单位产品能源消耗限额GB32047-2015实施日期2016-10-0110乙二醇单位产品能源消耗限额GB32048-2015实施日期2016-10-0111钛白粉单位产品能源消耗限额GB32051-2015实施日期2016-10-0112金矿开采单位产品能源消耗限额GB32032-2015实施日期2016-10-0113金矿选冶单位产品能源消耗限额GB32033-2015实施日期2016-10-0114金精炼单位产品能源消耗限额GB32034-2015实施日期2016-10-0115尿素单位产品能源消耗限额GB32035-2015实施日期2016-10-0116集装箱码头单位产品能源消耗限额GB31823-2015实施日期2016-07-0117制浆造纸单位产品能源消耗限额GB31825-2015实施日期2016-07-0118甲醇单位产品能源消耗限额 第4部分：焦炉煤气制甲醇GB29436.4-2015实施日期2016-07-0119干散货码头单位产品能源消耗限额GB31827-2015实施日期2016-07-0120甲醇单位产品能源消耗限额 第3部分：合成氨联产甲醇GB29436.3-2015实施日期2016-07-0121聚丙烯单位产品能源消耗限额GB31826-2015实施日期2016-07-0122甲醇单位产品能源消耗限额 第2部分：天然气制甲醇GB29436.2-2015实施日期2016-07-0123甲苯二异氰酸酯单位产品能源消耗限额GB31828-2015实施日期2016-07-0124碳酸氢铵单位产品电耗限额GB31829-2015实施日期2016-07-0125二苯基甲烷二异氰酸酯单位产品能源消耗限额GB31830-2015实施日期2016-07-01261,4-丁二醇单位产品能源消耗限额GB31824-2015实施日期2016-07-0127对二甲苯单位产品能源消耗限额GB31534-2015实施日期2016-06-01实施日期2016-06-28二甲醚单位产品能源消耗限额GB31535-20150129精对苯二甲酸单位产品能源消耗限额GB31533-2015实施日期2016-06-01。
2015年国家出台29项能耗限额标准
金矿开采单位产品能源消耗限额
GB32032-2015
实施日期2016-10-01
13
金矿选冶单位产品能源消耗限额
GB32033-2015
实施日期2016-10-01
14
金精炼单位产品能源消耗限额
GB32034-2015
实施日期2016-10-01
15
尿素单位产品能源消耗限额
GB32035-2015
实施日期2016-06-01
4
电工用铜线坯单位产品能源消耗限额
GB32046-2015
实施日期2016-10-01
5
黄磷单位产品能源消耗限额
GB2134-2015
实施日期2016-10-01
6
电石单位产品能源消耗限额
GB21343-2015
实施日期20பைடு நூலகம்6-10-01
7
合成氨单位产品能源消耗限额
GB21344-2015
实施日期2016-10-01
实施日期2016-10-01
16
集装箱码头单位产品能源消耗限额
GB31823-2015
实施日期2016-07-01
17
制浆造纸单位产品能源消耗限额
GB31825-2015
实施日期2016-07-01
18
甲醇单位产品能源消耗限额 第4部分：焦炉煤气制甲醇
GB29436.4-2015
实施日期2016-07-01
2015年国家出台单位产品能源消耗限额标准汇总表
序号
标准名称
标准编号
实施日期
1
苯乙烯单位产品能源消耗限额
GB32053-2015
实施日期2016-10-01
2
73项单位产品能耗限额标准-推荐下载
21
GB 29137- 铜及铜合金线材单位产品能源消耗 2013-10-
2012
限额
22 GB 29138- 磷酸一铵单位产品能源消耗限额 2012
对全部高中资料试卷电气设备，在安装过程中以及安装结束后进行高中资料试卷调整试验；通电检查所有设备高中资料电试力卷保相护互装作置用调与试相技互术通关，1系电过，力管根保线据护敷生高设产中技工资术艺料0不高试仅中卷可资配以料置解试技决卷术吊要是顶求指层，机配对组置电在不气进规设行范备继高进电中行保资空护料载高试与中卷带资问负料题荷试2下卷2，高总而中体且资配可料置保试时障卷，各调需类控要管试在路验最习；大题对限到设度位备内。进来在行确管调保路整机敷使组设其高过在中程正资1常料中工试，况卷要下安加与全强过，看度并22工且22作尽22下可22都能22可地护以缩1关正小于常故管工障路作高高；中中对资资于料料继试试电卷卷保破连护坏接进范管行围口整，处核或理对者高定对中值某资，些料审异试核常卷与高弯校中扁对资度图料固纸试定，卷盒编工位写况置复进.杂行保设自护备动层与处防装理腐置，跨高尤接中其地资要线料避弯试免曲卷错半调误径试高标方中高案资等，料，编试要5写、卷求重电保技要气护术设设装交备备置底4高调、动。中试电作管资高气，线料中课并敷3试资件且、设卷料中拒管技试试调绝路术验卷试动敷中方技作设包案术，技含以来术线及避槽系免、统不管启必架动要等方高多案中项；资方对料式整试，套卷为启突解动然决过停高程机中中。语高因文中此电资，气料电课试力件卷高中电中管气资壁设料薄备试、进卷接行保口调护不试装严工置等作调问并试题且技，进术合行，理过要利关求用运电管行力线高保敷中护设资装技料置术试做。卷到线技准缆术确敷指灵设导活原。。则对对：于于在调差分试动线过保盒程护处中装，高置当中高不资中同料资电试料压卷试回技卷路术调交问试叉题技时，术，作是应为指采调发用试电金人机属员一隔，变板需压进要器行在组隔事在开前发处掌生理握内；图部同纸故一资障线料时槽、，内设需，备要强制进电造行回厂外路家部须出电同具源时高高切中中断资资习料料题试试电卷卷源试切，验除线报从缆告而敷与采设相用完关高毕技中，术资要资料进料试行，卷检并主查且要和了保检解护测现装处场置理设。备高中资料试卷布置情况与有关高中资料试卷电气系统接线等情况，然后根据规范与规程规定，制定设备调试高中资料试卷方案。
国家下达节能减排硬指标
国家下达节能减排硬指标作者：来源：《财经界》2011年第10期国务院日前下发《“十二五”节能减排综合性工作方案》。
作为经济结构调整、产业升级和社会转型的重中之重，未来5年，我国节能减排的力度更大、标准更高、相关促进措施也更有力。
国务院日前下发《“十二五”节能减排综合性工作方案》。
作为经济结构调整、产业升级和社会转型的重中之重，未来5年，我国节能减排的力度更大、标准更高、相关促进措施也更有力。
根据《工作方案》确定的总体目标，“十二五”期间，我国在单位国内生产总值能耗、化学需氧量、二氧化硫、氨氮和氮氧化物排放量方面，均较“十一五”期间有显著下降。
《工作方案》明确，到2015年，全国万元国内生产总值能耗下降到0.869吨标准煤(按2005年价格计算)，比2010年的1.034吨标准煤下降16%，比2005年的1.276吨标准煤下降32%。
“十二五”期间，我国将实现节约能源6.7亿吨标准煤。
2015年，全国化学需氧量和二氧化硫排放总量分别控制在2347.6万吨、2086.4万吨，比2010年的2551.7万吨、2267.8万吨分别下降8%；全国氨氮和氮氧化物排放总量分别控制在238.0万吨、2046.2万吨，比2010年的264.4万吨、2273.6万吨分别下降10%。
为了有效推进目标的实施，《工作方案》特别明确，要合理分解节能减排指标，综合考虑经济发展水平、产业结构、节能潜力、环境容量及国家产业布局等因素，将全国节能减排目标合理分解到各地区、各行业。
在抑制高耗能、高排放行业过快增长的同时，我国将推进价格和环保收费改革、完善财政激励政策、健全税收支持政策、强化金融支持力度，进一步完善有利于节能减排的经济政策。
《工作方案》明确，要推进价格和环保收费改革。
理顺煤、电、油、气、水、矿产等资源性产品价格关系。
推行居民用电、用水阶梯价格。
完善电力峰谷分时电价政策。
深化供热体制改革，全面推行供热计量收费。
对能源消耗超过限额标准的企业和产品，实行惩罚性电价。
中华人民共和国国家发展和改革委员会公告2015年第31号——国家重点推广的低碳技术目录（第二批）
中华人民共和国国家发展和改革委员会公告2015年第31号——国家重点推广的低碳技术目录（第二批）
文章属性
•【制定机关】国家发展和改革委员会
•【公布日期】2015.12.06
•【文号】中华人民共和国国家发展和改革委员会公告2015年第31号
•【施行日期】2015.12.06
•【效力等级】部门规范性文件
•【时效性】现行有效
•【主题分类】节能管理
正文
中华人民共和国国家发展和改革委员会公告
2015年第31号
为贯彻落实“十二五”规划《纲要》和《“十二五”控制温室气体排放工作方案》的有关要求，加快低碳技术的推广应用，促进我国控制温室气体行动目标的实现，我委在2014年8月发布《国家重点推广的低碳技术目录》（第一批）基础上，继续组织编制了《国家重点推广的低碳技术目录》（第二批）（以下简称《目录》（第二批）），现予以公开，在国家发展改革委网站（）上发布。
请有关部门、单位及企业到网站查阅、下载。
《目录》（第二批）涉及煤炭、电力、建材、有色金属、石油石化、化工、机械、汽车、轻工、纺织、农业、林业等12个行业，涵盖新能源与可再生能源、燃料及原材料替代、工艺过程等非二氧化碳减排、碳捕集利用与封存、碳汇等领域，共29项国家重点推广的低碳技术。
附件：1. 国家重点推广的低碳技术目录（第二批）
2. 国家重点推广的低碳技术目录（第二批）技术简介
国家发展改革委2015年12月6日。
能耗标准Regulation EU 2015_1095 englich version
COMMISSION REGULATION (EU) 2015/1095of 5 May 2015 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for professional refrigerated storage cabinets, blast cabinets, condensing units and process chillers(Text with EEA relevance)THE EUROPEAN COMMISSION,Having regard to the Treaty on the Functioning of the European Union,Having regard to Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products (1) and in particular Article 15(1) thereof,After consulting the Consultation Forum referred to in Article 18 of Directive 2009/125/EC,Whereas:(1) Under Directive 2009/125/EC, ecodesign requirements should be set by the Commission for energy-related products representing significant volumes of sales and trade, having a significant environmental impact and presenting significant potential for improvement through design in terms of their environmental impact without entailing excessive costs.(2) The Commission established the first Working Plan in accordance with Directive 2009/125/EC on 21 October 2008 (2), covering the years 2009 to 2011, identifying refrigerating and freezing equipment, including professional refrigerated storage cabinets, blast cabinets, condensing units and process chillers, as a priority for the adoption of implementing measures.(3) The Commission has carried out a preparatory study on the technical, environmental and economic aspects of refrigerating and freezing equipment typically used in the Union, including professional refrigerated storage cabinets, blast cabinets, condensing units and process chillers. The study was devised together with stakeholders and interested parties from the Union and third countries, and the results have been made publicly available.(4) The fifth product of the refrigerating and freezing equipment lot — walk-in cold rooms — has been kept separate because of its unique characteristics within the group, and walk-in cold rooms should not be addressed by this Regulation at this time.(5) As regards professional refrigerated storage cabinets, it is not necessary to set ecodesign requirements for direct greenhouse gas emissions related to the use of refrigerants, as the increasing use of low global warming potential (GWP) refrigerants in the household and commercial refrigerator market sets a precedent that the professional refrigerated storage cabinets sector could follow.(6) As regards process chillers, it is appropriate to set ecodesign requirements for direct greenhouse gas emissions related to the use of refrigerants, as this will further direct the market towards low global warming potential (GWP) refrigerants, which are at the same time often more energy efficient.(7)As regards condensing units, non-proprietary technologies exist that reduce the direct greenhouse gas emissions related to the use of refrigerants through the use of refrigerants with reduced harmful impact on the environment. However, the cost-effectiveness and impact on energy efficiency of these technologies when applied to condensing units is still not fully established, as their diffusion is either negligible or represents only a small share of the market for condensing units today. 8.7.2015 L 177/19Official Journal ofthe European Union (1)OJ L 285, 31.10.2009, p. 10. (2)COM(2008) 660 final.(8) As refrigerants are addressed under Regulation (EC) No 842/2006 (1), and as a review of this Regulation was proposed by the Commission on 7 November 2012, no specific restrictions on the use of refrigerants should be set in this Regulation. However, a bonus should be proposed under the ecodesign requirements for condensing units and process chillers to steer the market towards the development of technologies based on the use of refrigerants with reduced harmful impact on the environment, as a bonus would lead to lower minimum energy efficiency requirements for condensing units and process chillers intended to be used with low GWP refrigerants. The future review will look at the treatment of products using high GWP refrigerants in line with the existing relevant legislation.(9)For the purposes of this Regulation, energy consumption in the use phase has been identified as the significant environmental aspect of professional refrigerated storage cabinets, blast cabinets, condensing units and process chillers. (10) The preparatory study has shown that requirements regarding the other ecodesign parameters referred to in Part 1 of Annex I to Directive 2009/125/EC are not necessary in the case of professional refrigerated storage cabinets, blast cabinets, condensing units and process chillers.(11) Annual electricity consumption in the Union related to condensing units, process chillers and professional refrigerated storage cabinets was estimated to have been 116,5 TWh (terawatt hour) in 2012, corresponding to 47 Mt CO 2 emissions. Unless specific measures are taken, annual energy consumption is expected to be 134,5 TWh in 2020 and 154,5 TWh in 2030, corresponding to 54,5 and 62,5 Mt CO 2 respectively. The combined effect of this Regulation and the Commission Delegated Regulation (EU) 2015/1094 (2) is expected to result in annual electricity savings of 6,3 TWh by 2020 and 15,6 TWh by 2030, as compared with what would happen if no measures were taken.(12) The preparatory study shows that the use-phase energy consumption can be significantly reduced by applying cost-effective non-proprietary technologies that reduce the combined costs of purchasing and operating these products.(13) Ecodesign requirements should harmonise energy consumption requirements for professional refrigerated storage cabinets, blast cabinets, condensing units and process chillers throughout the Union, thus helping to make the single market more efficient and to improve the environmental performance of those products.(14) The ecodesign requirements should not affect the functionality or affordability of professional refrigerated storage cabinets, blast cabinets, condensing units and process chillers from the end-user's perspective and should not negatively affect health, safety or the environment.(15) The ecodesign requirements should be introduced gradually to give manufacturers sufficient time to redesign their products subject to this Regulation. The timing should be such that cost impacts for manufacturers are taken into account, while ensuring timely achievement of the objectives of this Regulation.(16) Product parameters should be measured and calculated using reliable, accurate and reproducible methods that take into account recognised state-of-the-art measurement and calculation methods. These include, where available, harmonised standards adopted by European standardisation bodies following a request from the Commission, in accordance with the procedures laid down in Directive 98/34/EC of the European Parliament and of the Council (3).(17) The definition of frozen operating temperature shall be used for establishing the values of the annual energy consumption for professional refrigerated storage cabinets; while taking into account food safety, it is not related to food safety legislation.(18) In accordance with Article 8(2) of Directive 2009/125/EC, this Regulation specifies which conformity assessment procedures apply.(1)Regulation (EC) No 842/2006 of the European Parliament and of the Council of 17 May 2006 on certain fluorinated greenhouse gases (OJ L 161, 14.6.2006, p. 1). (2)Commission Delegated Regulation (EU) 2015/1094 of 5 May 2015 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of professional refrigerated storage cabinets (see page 2 of this Official Journal). (3)Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations and of rules on Information Society services (OJ L 204, 21.7.1998, p. 37).(19) To facilitate compliance checks, manufacturers should provide information in the technical documentationreferred to in Annexes IV and V to Directive 2009/125/EC insofar as that information relates to the requirements laid down in this Regulation.(20) To further limit the environmental impact of professional refrigerated storage cabinets, blast cabinets, condensingunits and process chillers, manufacturers should provide information on disassembly, recycling or disposal.(21) In addition to the legally binding requirements laid down in this Regulation, indicative benchmarks for bestavailable technologies should be identified to ensure that information on the life-cycle environmental performance of professional refrigerated storage cabinets, condensing units and process chillers is widely available and easily accessible.(22) The measures provided for in this Regulation are in accordance with the opinion of the Committee established byArticle 19(1) of Directive 2009/125/EC,HAS ADOPTED THIS REGULATION:Article 1Subject matter and scope1.This Regulation establishes ecodesign requirements for the placing on the market of professional refrigerated storage cabinets and blast cabinets.This Regulation shall apply to electric mains-operated blast cabinets, and electric mains-operated professional refrigerated storage cabinets including those sold for the refrigeration of foodstuffs and animal feed.However, it shall not apply to the following products:(a) professional refrigerated storage cabinets that are primarily powered by energy sources other than electricity;(b) professional refrigerated storage cabinets operating with a remote condensing unit;(c) open cabinets, where being open is a fundamental requirement for their primary functionality;(d) cabinets specifically designed for food processing, where the mere presence of one compartment, with a net volumeequivalent to less than 20 % of the cabinet's total net volume and specifically designed for food processing is not sufficient for exemption;(e) cabinets specifically designed only for the purpose of thawing frozen foodstuffs in a controlled manner, where themere presence of one compartment specifically designed for thawing frozen foodstuffs in a controlled manner is not sufficient for exemption;(f) saladettes;(g) serve-over counters and other similar forms of cabinets primarily intended for display and sale of foodstuffs inaddition to refrigeration and storage;(h) cabinets that do not use a vapour compression refrigeration cycle;(i) blast cabinets and blast rooms with a capacity superior to 300 kg of foodstuffs;(j) continuous-process blast equipment;(k) custom-made professional refrigerated storage cabinets and blast cabinets, made on a one-off basis according to individual customer specification and not equivalent to other professional refrigerated storage cabinets as described in definition 10 of Annex I or blast cabinets as described in definition 11 of Annex I;(l) built-in cabinets;(m) roll-in and pass-through cabinets;(n) static air cabinets;(o) chest freezers.2.This Regulation also establishes ecodesign requirements for the placing on the market of condensing units operating at low or medium temperature or both.However, it shall not apply to the following products:(a) condensing units including an evaporator, which may be an integral evaporator, such as in monobloc units, or a remote evaporator, such as in split units;(b) compressor packs or racks, which do not include a condenser;(c) condensing units of which the condenser-side does not use air as heat transfer medium.3.This Regulation also establishes ecodesign requirements for the placing on the market of process chillers intended to operate at low or medium temperature.However, it shall not apply to the following products:(a) process chillers intended to operate at high temperature;(b) process chillers exclusively using evaporative condensing;(c) custom-made process chillers assembled on site, made on a one-off basis;(d) absorption chillers.Article 2Definitions1.The following definitions shall apply:(a) ‘professional refrigerated storage cabinet’ means an insulated refrigerating appliance integrating one or more compartments accessible via one or more doors or drawers, capable of continuously maintaining the temperature of foodstuffs within prescribed limits at chilled or frozen operating temperature, using a vapour compression cycle, and intended for the storage of foodstuffs in non-household environments but not for the display to or access by customers;(b) ‘blast cabinet’ means an insulated refrigerating appliance primarily intended to rapidly cool hot foodstuffs to below 10 °C in the case of chilling and below – 18 °C in the case of freezing;(c) ‘blast room’ means an enclosure, for which the doorway and internal space is large enough for a person to step inside, primarily intended to rapidly cool hot foodstuffs to below 10 °C in the case of chilling and below – 18 °C in the case of freezing;(d) ‘capacity’ means, for blast cabinets, the food weight which can be processed (by the blast cabinet) to below 10 °C in the case of chilling and below – 18 °C in the case of freezing in a single operation;(e) ‘continuous process blast equipment’ means a blast cabinet provided with a conveyor belt to feed foodstuff through, to allow continuous process for blast chilling or freezing of the foodstuff;(f) ‘foodstuffs’ means food, ingredients, beverages, including wine, and other items primarily intended for consumption which require refrigeration at specified temperatures;(g) ‘built-in cabinet’ means a fixed insulated refrigerating appliance intended to be installed in a cabinet, in a prepared recess in a wall or similar location, and requiring furniture finishing;8.7.2015L 177/22 Official Journal ofthe European Union(h) ‘roll-in cabinet’ means a professional refrigerated storage cabinet including one unique compartment that allows wheeled racks of product to be wheeled in;(i) ‘pass-through cabinet’ means a professional refrigerated storage cabinet accessible from both sides;(j) ‘static air cabinet’ means a professional refrigerated storage cabinet without internal forced-air circulation, specifically designed to store temperature-sensitive foodstuffs or to avoid a drying effect on foodstuffs stored without a sealed enclosure, where a single static air compartment within the cabinet is not sufficient to designate the cabinet as a static air cabinet;(k) ‘heavy-duty cabinet’ means a professional refrigerated storage cabinet capable of continuously maintaining chilled or frozen operating temperature in all its compartment(s) in ambient conditions corresponding to climate class 5, as detailed in Table 3 of Annex IV;(l) ‘open cabinet’ means a professional refrigerated storage cabinet whose refrigerated enclosure can be reached from the outside without opening a door or a drawer, where the mere presence of one compartment which can be reached from the outside without opening a door or a drawer, with a net volume equivalent to less than 20 % of the professional refrigerated storage cabinet's total volume, is not sufficient to qualify it as such;(m) ‘saladette’ means a professional refrigerated storage cabinet with one or more doors or drawer fronts in the vertical plane that has cut-outs in the top surface into which temporary storage bins can be inserted for easy-access storage of foodstuffs such as, but not limited to, pizza toppings or salad items;(n) ‘chest freezer’ means a food freezer in which the compartment(s) is accessible from the top of the appliance or which has both top-opening type and upright type compartments but where the gross volume of the top-opening type compartment(s) exceeds 75 % of the total gross volume of the appliance;(o) ‘condensing unit’ means a product integrating at least one electrically driven compressor and one condenser, capable of cooling down and continuously maintaining low or medium temperature inside a refrigerated appliance or system, using a vapour compression cycle once connected to an evaporator and an expansion device;(p) ‘low temperature’ means that the condensing unit is capable of delivering its rated cooling capacity at a saturated evaporating temperature of – 35 °C;(q) ‘medium temperature’ means that the condensing unit is capable of delivering its rated cooling capacity at a saturated evaporating temperature of – 10 °C;(r) ‘rated cooling capacity’ means the cooling capacity which the condensing unit allows the vapour compression cycle to reach, once connected to an evaporator and an expansion device, when operating at full load, and measured at standard rating conditions with the reference ambient temperature set at 32 °C, expressed in kW;(s) ‘process chiller’ means a product integrating at least one compressor and one evaporator, capable of cooling down and continuously maintaining the temperature of a liquid in order to provide cooling to a refrigerated appliance or system; it may or may not integrate the condenser, the coolant circuit hardware and other ancillary equipment;(t) ‘low temperature’ means that the process chiller is capable of delivering its rated cooling capacity at an indoor heat exchanger outlet temperature of – 25 °C, at standard rating conditions;(u) ‘medium temperature’ means that the process chiller is capable of delivering its rated cooling capacity at an indoor heat exchanger outlet temperature of – 8 °C, at standard rating conditions;(v) ‘high temperature’ means that the process chiller is capable of delivering its rated cooling capacity at an indoor heat exchanger outlet temperature of 7 °C, at standard rating conditions;(w) ‘rated cooling capacity’, expressed in kW, means the cooling capacity that the process chiller is able to reach, when operating at full load, and measured at standard rating conditions with the reference ambient temperature at 35 °C for air-cooled chillers and 30 °C water inlet temperature at the condenser for water-cooled chillers.8.7.2015 L 177/23Official Journal ofthe European Union(x)‘compressor pack’ or ‘compressor rack’ means a product incorporating at least one or more electrically driven refrigeration compressor(s) and a control system;(y) ‘absorption chiller’ means a process chiller in which refrigeration is effected by an absorption process using heat as the energy source;(z) ‘evaporative condensing chiller’ means a process chiller equipped with an evaporating condenser, in which the refrigerant is cooled by a combination of air movement and water spray.Article 3Ecodesign requirements and timetable1.The ecodesign requirements for professional refrigerated storage cabinets and blast cabinets are set out in Annex II.2.The ecodesign requirements for condensing units are set out in Annex V.3.The ecodesign requirements for process chillers are set out in Annex VII.4.Ecodesign requirements shall apply in accordance with the following timetable:(a) From 1 July 2016:(1) condensing units shall comply with the requirements set out in points 1(a) and 2 of Annex V;(2) process chillers shall comply with the requirements set out in points 1(a) and 2 of Annex VII.(3) professional refrigerated storage cabinets shall comply with the requirements set out in points 1(a)(i) and 2(a) ofAnnex II;(4) heavy-duty cabinets shall comply with the requirements set out in point 1(b) and 2(a) of Annex II.(5) Blast cabinets shall comply with requirements set out in point 2(b) of Annex II.(b) From 1 January 2018:(1) professional refrigerated storage cabinets shall comply with requirements set out in point 1(a)(ii) of Annex II.(c) From 1 July 2018:(1) condensing units shall comply with the requirements set out in point 1(b) of Annex V;(2) process chillers shall comply with the requirements set out in point 1(b) of Annex VII.(d) From 1 July 2019:(1) professional refrigerated storage cabinets shall comply with requirements set out in point 1(a)(iii) of Annex II. pliance with ecodesign requirements for professional refrigerated storage cabinets shall be measured and calculated in accordance with the methods set out in Annexes III and IV.pliance with ecodesign requirements for condensing units shall be measured and calculated in accordance with the methods set out in Annex VI.pliance with ecodesign requirements for process chillers shall be measured and calculated in accordance with the methods set out in Annex VIII.Article 4Conformity assessment1.The conformity assessment procedure referred to in Article 8(2) of Directive 2009/125/EC shall be the internal design control set out in its Annex IV or the management system set out in its Annex V.2.For the purposes of conformity assessment pursuant to Article 8 of Directive 2009/125/EC, the technical documentation shall contain the information set out in point 2 of Annex II, point 2(b) of Annex V and point 2(b) of Annex VII to this Regulation.Article 5Verification procedure for market surveillance purposesThe authorities of the Member States shall apply the verification procedure set out in Annex IX, Annex X and Annex XI when performing the market surveillance checks referred to in Article 3(2) of Directive 2009/125/EC to ensure compliance with the requirements set out in Annex II, Annex V and Annex VII to this Regulation.Article 6Indicative benchmarksThe indicative benchmarks for best-performing professional refrigerated storage cabinets, condensing units and process chillers available on the market at the time of entry into force of this Regulation are set out in Annex XII.Article 7ReviewThe Commission shall review this Regulation in the light of technological progress and present the results of that review to the Consultation Forum no later than five years from the date of entry into force of this Regulation. The review shall include the following:1. for professional refrigerated storage cabinets, an assessment of the appropriateness of introducing, in particular:(a) ecodesign requirements for cabinets listed in Article 1(1);(b) stricter requirements for heavy-duty cabinets;(c) information requirement on a professional refrigerated storage cabinet's capacity to cool down foodstuffs;(d) a method for determining the standard annual energy consumption for refrigerator-freezers;(e) a revised method for the standard annual energy consumption of counter cabinets;2. for blast cabinets, an assessment of the appropriateness of introducing ecodesign requirements for these products;3. for walk-in cold rooms, an assessment of the appropriateness of introducing ecodesign requirements for theseproducts;4. for condensing units and process chillers:(a) an assessment of the appropriateness of setting ecodesign requirements covering direct greenhouse gas emissionsrelated to refrigerants;(b) an assessment of the appropriateness of setting ecodesign requirements for condensing units with a rated coolingcapacity lower than 0,1 kW at low temperature and 0,2 kW at medium temperature and condensing units with a rated cooling capacity higher than 20 kW at low temperature and 50 kW at medium temperature;(c) an assessment of the appropriateness of setting ecodesign requirements for condensing units sold with anevaporator, compressor packs and racks which do not include a condenser, and condensing units which do not use air as heat transfer medium for the condenser;(d) an assessment of the appropriateness of setting ecodesign requirements for process chillers using evaporativecondensing and process chillers using absorption technology;5. for all products, a check if newer versions of quoted sources are available for GWP values;6. for all products, the value of the admitted tolerances in the verification procedure for the measured value of theenergy consumption.Article 8Entry into forceThis Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 5 May 2015.For the CommissionThe PresidentJean-Claude JUNCKERANNEX I Definitions applicable for Annexes II to XIIFor the purposes of Annexes II to XII the following definitions shall apply:Definitions related to professional refrigerated storage cabinets and blast cabinets(1) ‘net volume’ means the volume containing foodstuffs within the load limit;(2) ‘chilled operating temperature’ means that the temperature of foodstuffs stored in the cabinet is continuously maintained at a temperature between – 1 °C and 5 °C;(3) ‘frozen operating temperature’ means that the temperature of foodstuffs stored in the cabinet is continuously maintained at a temperature lower than – 15 °C, which is understood as the highest temperature of the warmest package test;(4) ‘multi-use cabinet’ means that a professional refrigerated storage cabinet or separate compartment of the same cabinet may be set at different temperatures for chilled or frozen foodstuffs;(5) ‘combined cabinet’ means a professional refrigerated storage cabinet including two or more compartments with different temperatures for the refrigeration and storage of foodstuffs;(6) ‘refrigerator-freezer’ means a type of combined cabinet including at least one compartment exclusively intended for chilled operating temperature and one compartment exclusively intended for frozen operating temperature;(7) ‘vertical cabinet’ means a professional refrigerated storage cabinet of overall height equal to or higher than 1 050 mm with one or more front doors or drawers accessing the same compartment;(8) ‘counter cabinet’ means a professional refrigerated storage cabinet of overall height lower than 1 050 mm with one or more front doors or drawers accessing the same compartment;(9) ‘light-duty cabinet’, also known as ‘semi-professional cabinet’, means a professional refrigerated storage cabinet only capable of continuously maintaining chilled or frozen operating temperature in all its compartment(s) in ambient conditions corresponding to climate class 3, as detailed in Table 3 of Annex IV; if the cabinet is able to maintain temperature in ambient conditions corresponding to climate class 4, it shall not be considered a light-duty cabinet;(10) ‘equivalent professional refrigerated storage cabinet’ means a professional refrigerated storage cabinet model placed on the market with the same net volume, same technical, efficiency and performance characteristics, and same compartment types and volumes as another professional refrigerated storage cabinet model placed on the market under a different commercial code number by the same manufacturer;(11) ‘equivalent blast cabinet’ means a blast cabinet model placed on the market with the same technical, efficiency and performance characteristics, as another blast cabinet model placed on the market under a different commercial code number by the same manufacturer;Definitions related to condensing units(12) ‘rated cooling capacity’ (P A ) means the cooling capacity that the condensing unit enables the vapour compression cycle to reach, once connected to an evaporator and an expansion device, when operating at full load, and measured at standard rating conditions with the reference ambient temperature set at 32 °C, expressed in kW to two decimal places;8.7.2015 L 177/27Official Journal ofthe European Union。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
实施日期2016-07-01
23
甲苯二异氰酸酯单位产品能源消耗限额
GB31828-2015
实施日期2016-07-01
24
碳酸氢铵单位产品电耗限额
GB31829-2015
实施日期2016-07-01
25
二苯基甲烷二异氰酸酯单位产品能源消耗限额
GB31830-2015
实施日期2016-07-01
12
金矿开采单位产品能源消耗限额
GB32032-2015
实施日期2016-10-01
13
金矿选冶单位产品能源消耗限额
GB32033-2015
实施日期2016-10-01
14
金精炼单位产品能源消耗限额
GB32034-2015
实施日期2016-10-01
15
尿素单位产品能源消耗限额
GB32035-2015
4
电工用铜线坯单位产品能源消耗限额
GB32046-2015
实施日期2016-10-01
5
黄磷单位产品能源消耗限额
GB2134-2015
实施日期2016-10-01
6
电石单位产品能源消耗限额
GB21343-2015
实施日期2016-10-01
7
合成氨单位产品能源消耗限额
GB21344-2015
实施日期2016-10-01
2015年国家出台单位产品能源消耗限额标准汇总表
序号
标准名称
标准编号
实施日期
1
苯乙烯单位产品能源消耗限额
GB32053-2015
实施日期2016-10-01
2
电弧炉冶炼单位产品能源消耗限额
GB32050-2015
实施日期2016-10-01
3
金矿开采单位产01
26
1,4-丁二醇单位产品能源消耗限额
GB31824-2015
实施日期2016-07-01
27
对二甲苯单位产品能源消耗限额
GB31534-2015
实施日期2016-06-01
28
二甲醚单位产品能源消耗限额
GB31535-2015
实施日期2016-06-01
29
精对苯二甲酸单位产品能源消耗限额
GB31533-2015
实施日期2016-10-01
16
集装箱码头单位产品能源消耗限额
GB31823-2015
实施日期2016-07-01
17
制浆造纸单位产品能源消耗限额
GB31825-2015
实施日期2016-07-01
18
甲醇单位产品能源消耗限额 第4部分：焦炉煤气制甲醇
GB29436.4-2015
实施日期2016-07-01
实施日期2016-06-01
8
糖单位产品能源消耗限额
GB32044-2015
实施日期2016-10-01
9
啤酒单位产品能源消耗限额
GB32047-2015
实施日期2016-10-01
10
乙二醇单位产品能源消耗限额
GB32048-2015
实施日期2016-10-01
11
钛白粉单位产品能源消耗限额
GB32051-2015
实施日期2016-10-01
19
干散货码头单位产品能源消耗限额
GB31827-2015
实施日期2016-07-01
20
甲醇单位产品能源消耗限额 第3部分：合成氨联产甲醇
GB29436.3-2015
实施日期2016-07-01
21
聚丙烯单位产品能源消耗限额
GB31826-2015
实施日期2016-07-01
22
甲醇单位产品能源消耗限额 第2部分：天然气制甲醇