立体车库机械外文文献翻译、中英文翻译、外文翻译

合集下载

立体车库外文翻译

Numerical control technology and equipment trend of developmentThe equipment industry technical level and the modernized degree were deciding the entire national economy level and the modernized degree, the numerical control technology and the equipment are the development emerging high technology and new technology industry and the state-of-art industr y (for example defense industry industries and so on information technology and industry, biological technology and industry, aviation, astronautics) enables the technology and the most basic equipmen t. Marx had said “each kind of economical time difference, does not lie in produces any, but how l ies in produces, with any means of labor production”. The technique of manufacture and the equip ment is the humanity produces active the most basic producer goods, but the numerical control tech nology also is advanced now the technique of manufacture and the equipment most core technology. Now the various countries manufacturing industry widely uses the numerical control technology, sh arpens the manufacturing capacity and the level, enhances to the dynamic changeable market adaptiv eness and competitive ability. In addition in the world various industries developed country also list s as the national strategic resources the numerical control technology and the numerical control equi pment, not only takes the significant measure to develop own numerical control technology and the industry, moreover implements the blockade and the limit policy in “precise and advanced” the n u merical control key technologies and the equipment aspect to our country. In brief, develops vigorou sly take the numerical control technology has become the world each developed country acceleration economy development as the core advanced technique of manufacture, enhances the comprehensive national strength and the national status important way. The numerical control technology is carries on the control with the numerical information to the mechanical movement and the work process t he technology, the numerical control equipment is take the numerical control technology as represent ative's new technology the integration of machinery product which forms to the traditional manufact ure industry and the emerging manufacturing industry seepage, namely so-called digitized equipment, its technical scope cover very many domains: (1) machine manufacture technology; (2) informationprocessing, processing, transmission technology; (3) automatic control technology; (4) servo actuates the technology; (5) sensor technology; (6) software technology and so on. 1 numerical control tech nology trend of development Not only the numerical control technology application has brought the revolutionary change for the traditional manufacturing industry, causes the manufacturing industry to become the industrialization the symbol, moreover along with numerical control technology unceasi ng development and application domain expansion, he to national economy and the people's liveliho od some important professions (IT, automobile, light industry, medical service and so on) developme nt more and more vital role, because these professions must equip the digitization already was the modern development major tendency. The numerical control technology and the equipment developm ent tendency looked from the present world that, its main research hotspot has following several aspect [1~4]. 1.1 high speed, high precision work technology and equipm ent new tendency The efficiency, the quality are the advanced technique of manufacture main bodie s. High speed, the high precision work technology may enhance the efficiency enormously, enhances the product the quality and the scale, reduces the production cycle and sharpens the market compe tition ability. Lists as one of 5 great modern techniques of manufacture for this Japan Tip Technolo gy Research board it, the international production project learns (CIRP) its determination is one of 21st century central research directions. In the passenger vehicle industry domain, yearly produces 3 00,000 production metres was 40/s，moreover the multi-variety processing is one of key questions which the passenger vehicle equipment must solve; In the aviation and the astronavigation industry domain, its processing spare part many for the thin wall and the thin muscle, the rigidity is very b ad, material for aluminum or aluminum alloy, only then in the high cutting speed and the cutting f orce very small situation, can to these muscles, the wall carry on the processing. Recently uses the large-scale overall aluminum alloy semifin ished materials “pull out spatially” the method to make t he wing, the fuselage and so on the large-scale components substitutes many components through th e multitudinous rivets, the bolt and other joint way assembling, causes the component the intensity,the rigidity and the reliability obtains the enhancement. These all to processed the equipment to pro pose high speed, Gao Jing and the high flexible request. Unfolds from EMO2001 meets the situatio n to look that, processes the center feed rate to be possible high speed to reach 80m/min, even hig her, the aerial transport stroke speed may reach 100m/About min. At present in the world many aut omotive factories, including our country's Shanghai General Motors, already used by the high speed processing center composition production line part substitution aggregate machine-tool. American CI NCINNATI Corporation's HyperMach engine bed feed rate reaches 60m/most greatlymin, fast is 100 m/min, the acceleration reaches 2g, the main axle rotational speed has reached 60 000r/min. Process es a thin wall airplane part, only uses 30min, but the same components need 3h in the common hi gh speed milling machine processing, needs 8h in the plain milling machine processing; The Germa n DMG Corporation's double main axle lathe main axle speed and the acceleration respectively reac h 12*! 000r/mm 和1g。

立体车库中英文对照外文翻译文献

中英文对照外文翻译文献(文档含英文原文和中文翻译)摘要随着我国经济的飞速发展，城市人口日益增多，特别是随着改革开放以来，我国进入了汽车拥有率迅速上升时候。

以往那种单层平面停车场也越来越不能满足市场的需求。

对多停车位、少占空间、使用操作简单、安全可靠的“立体停车库”的建设，是解决目前寸土寸金的大都市内停车难的有效办法。

立体车库是一种以单层平面停车场为核心、多平面的空间停车车库，通过可编程控制器控制车位空间位置的变动,使车位能够实现空间到平面的转化，实现多重单层平面停车的功能。

升降横移式立体车库利用托盘移位产生垂直通道，实现多层车位的升降来存取车辆。

关键词：立体车库、可编程控制器、升降横移式立体车库立体车库1.1 立体车库概述车辆无处停放的问题是城市的社会、经济、交通发展到一定程度产生的结果，立体停车设备的发展在国外，尤其在日本已有近30~40年的历史，无论在技术上还是在经验上均已获得了成功。

我国也于90年代初开始研究开发机械立体停车设备，距今已有十年的历程。

由于很多新建小区内住户与车位的配比为1:1，为了解决停车位占地面积与住户商用面积的矛盾,立体机械停车设备以其平均单车占地面积小的独特特性，已被广大用户接受。

机械车库与传统的自然地下车库相比,在许多方面都显示出优越性。

首先，机械车库具有突出的节地优势。

以往的地下车库由于要留出足够的行车通道，平均一辆车就要占据40平方米的面积，而如果采用双层机械车库,可使地面的使用率提高80 —90,如果采用地上多层21层,立体式车库的话 50平方米的土地面积上便可存放40辆车,这可以大大地节省有限的土地资源并节省土建开发成本。

机械车库与地下车库相比可更加有效地保证人身和车辆的安全,人在车库内或车不停准位置,由电子控制的整个设备便不会运转。

应该说,机械车库从管理上可以做到彻底的人车分流。

在地下车库中采用机械存车,还可以免除采暖通风设施,因此运行中的耗电量比工人管理的地下车库低得多。

基于欧姆龙可编程序控制器的6层立体车库设计外文文献翻译、中英文翻译、外文翻译

英文原文THE 6 LAYERS STEREO GARAGE DESIGN BASED ON OMRON PLCZhuoran Zhang Department of Electrical & Engineering Wuhan Polytechnic University Wuhan, China E-mail: Harry zzr@Zhe Mao, Hailing Wan Department of Electrical & Engineering Wuhan Polytechnic University Wuhan, China E-mail:maozhe998@ Abstract—with the development of the modern society, the number of the vehicles in these cities has been increasing with an exponential speed; especially the private cars, putting a great pressure on urban transportation and parking slot. This article is mainly concerned about the entire structure, running procedure and electrical system design including hardware and program design ideas for lifting-traversing stereo garage, which will not only shorten the developing period but also orient parking to centralization and automation direction; Owning some reference value.Keywords- Stereo Garage, Omron PLC, DesignInsufficient parking slots is resulted from the development of the cities, economy and transportation of the cities, the traditional garages are always making the use of the nature vacancy, in a community, the ratio between parking slots and residents is approximately 1:1, one parking slot for a family at least, in order to solve the contradiction that the parking slots using precious commercial land, the stereo mechanical garages with the advantage of the average parking slot takes of less area have been gradually in front of us. Compared with the traditional underground parking garage, the stereo garages have more advantages. First of all, the stereo garages can save more area. The traditional ways must be amassed driving path for vehicles, averagely, a car will take up 40m2 If we take multi-layers garage (6 layers) in to consideration, it is possible for 13 cars to park in the area of 50m2, which will save lots of land resources and land construction expenditure. Meanwhile, the stereo garage could guarantee the safety of the people and their cars. If there is anybody in the garage or the cars are not fully stopped, the system controlled by electrical equipment will not run either. It means that, in the scale of the management, the mechanical garage could separate the people and vehicles, which makes it more systematically. Especially for underground garages, install this kind of garage will save a large area of illumination system, so it is also emerge conservation and environment protection.Ⅰ.THE CLASSIFICATION AND IMPLEMENT BACKDROP OF THE STEREO GARAGEA.THE CLASSIFICATION OF THE STEREO GARAGEAccording to the present development of the stereo garage, the stereo garage is including lifting-traversing, roadway stacking, vertical lifting, vertical circulating, circle level circulation; The concept of the stereo garage is all from automatic logistic material transmitting system. [3]The purpose of the stereo garage is to solve the parking problem in developed cities, that is make use of limited area to park more vehicles so as to save land resources of the cities and manage thestatic transportation of the urban. This article gives out a way to design lifting-traversing stereo garage based on Omron PLC CP1H, which could extend to solve relevant projects.B. A BRIEF INTRODUCTION TO LIFTING-TRAVERSING STEREO GARAGE.The modularization concept is imported in lifting-traversing stereo garage. It can be designed into two to five layers or half underground type, the number of the slot is from tens to hundreds. This kind of garage is suitable for both above ground and underground, the characteristics could be generalized as less occupation of land, simple structure, flexible configuration, lower cost in construction, decoration and fire protection and short period of construction; Safe and convenient for saving and taking cars; Smoothly operation, lower noise during running. [4]It is also appropriate for commercial, bureau and residential use. The safety equipment mainly is photoelectrical sensors, limiting displacement protector and emergency switch.C. THE ENTIRE FRAME OF THE SYSTEMAs the fig. l representing, besides the central controller PLC, the stereo garage system could be divided into three sections: I. Mechanical System; It includes column, beam, carrying board, vehicle frame, hooks and etc. II. Electrical System; this section is the core of this article, which controls the whole system to operate. III. Touching Panel; it is the port from which operators and the system exchanging messages, operators could not only operate the system, but also in the situation of the malfunction, it could let operator enter the manual or debugging mode.Figure 1. The structure of the system Figure 2. Touch Screen (Auto running and Manual) • THE MAIN HARDWARE OF THE SYSTEMWe mainly use the Omron PLC CPH1, on considering the control requirement and the cost, we adopting CP1HX40DR-A PLC, the programming ways are ladder diagram or ST instruction list. The instruction length is 1 to 7 steps per instruction, each I/O relays has 1600 ports, USB 1.1 for communication.The display part, we import screen of WEINVIEW MT6056i series, the screen material is TFT, 5.6 inches, and the resolution is 320x234, with USB2.0 port supporting downloading. The frequency of the CPU is 400 MHz, 128RAM.D.THE SYSTEM STR UCTURE AND FUNCTIONSThe mechanical parts cooperating with electrical system are carrying board, hooks and chains. There are 6 slots on each layer besides 7 slots on the top layer, totally 37 slots, the purpose for one slot empty on each layer is that making enough space for carrying board to move. The carrying boards of the first floor only design to traverse, also the top floor carrying boards are only supposed to lift. The other carrying boards among these floors are designed to life and traverse. In this way, this system could achieve the saving and taking from any slots among these 6 layers.In addition, this system has a touch screen system, which switches between auto run andmanual debugging mode. Under the auto run mode, it could select a certain slot to accomplish saving and taking behavior, at the same time, monitoring the operation of the system. (Green words "System Running" in auto mode without malfunction). When failure occurs, the system seized and on screen flashing yellow failure code with red backdrop, with the help of the failure code, the professional operator could recognize and eliminate the failures promptly and accurately. On considering more authorities are given in manual debugging mode, to preclude unprofessional persons enter the mode by chance, before enter the mode, there is a cipher verification, in which the sequence could be set by ourselves. This would protect the system from potential dangers.Figure 2 is the graph of system auto running, manual and debugging.Ⅱ. THE COMPOSURE OF THE ELECTRICAL SYSTEMA. STRONG ELECTRICITY SYSTEMThe strong power system includes power supply, protection and driving mechanism, here is electronic motors. Installing XJ3-D on the forepart of the power supply wire, which is used to protect phase sequence of the three-phase voltage, so that guarantee the right rotation of the motors. Moreover, the motors on some layers use the same three-phase voltage.B.THE SET OF THE MOTORSThere are 6 traversing motors on the first layer, 6 traversing motors for 2 to 5 layers each, and so it is with lifting motors for 2 to 5 layers. The top layers have only 7 lifting motors. After setting the motors, mark every motor. For example, the motor driving the third slot of the second layer, we mark it with "23", the relay before the motor are named KM23. Here series connect all the motors' thermal protection, any motor's problem will stop the system. In this way, it has no influence on the stability of the system, but lowers the cost. At the same time, make it easier to find the problems. (What we need to do is press the thermal protection switch one by one).C .WEAK POWER SYSTEMThe weak power system is also the control system, which are mainly the PLC mode and its 5 extended modules, also the sensors. As the figure below, on the right is the input part, DC 24V, on the left, is the output section, AC 220V, to connect with contactors and drive them. These device's functions have close relationships with the entire system's control requirements. On the above of the graph, the protection equipment are emergency switch, installed beside the touching panel, emergency only, trigger it, the system stops; Front and back photoelectrical sensors, which are used to detect people or unidentified objects breaking into the system, if this happens, the system would stop then response with photoelectrical failure, the goal is to protect the people and the vehicles. The phase sequence protection has been illustrated before; Over current protection normally activated under the motor stuck; All the margin switches series connected, cult the main power when any carrying board exceed the limiting position.Limit switches including up ones and down ones or left and right limit switches. In order to achieve the controlling requirements, the level limit switches are installed on the both side of the each slot frame, while the vertical limit switches are installed on the chain which attached to the motor. It is necessary to point out that the first layer only installed down and left right limit switches, the top layer only installed up switches these switches could sense the position of thecarrying boards, helping to finish the lifting and traversing control; Hook position sensors is to fix the vehicles and sense the slot empty or not.The output points"00 04 05 06 07" are to select different phase for each layer, so control the motors' rotation ways.Figure 3. PLC Modules (Segment)There are other 4 extended modules, which only give more I/O ports to the system, similar to this main part.Ⅲ. OPERATION PROCEDUREA. TAKING PROCEDUREAs far as the first layer concerned, it is only designed to traverse, so as to make space to upper layer's carrying boards to move downward. So do the other layers, which are designed to traverse. When traversing meet the requirements, lifting mechanism will run to put the carrying board down, finishing the saving and taking procedure. During the procedure the photoelectrical sensors are open and will behave as fore part has explained. In figure 2A, is the taking condition, at this time "Loading" will flash until the taking procedure finishes.When we enter "51", the system will distinguish whether the operation is a taking or a saving according to the hook of the 51 slot. Then prints the message responded to the state of the hook on the screen, the operator could confirm the operation or cancel it. On confirming, the 51 carrying board will wait for its downward boards to finish the traversing move then moving down. Inaddition, a timer is added to this control module in order to preclude level limit switches malfunction, resulting into the traversing move time up. If the time for traversing move exceeds the set time, the system will warn the operator "traversing move time up" which displays on the screen, the operator could check out the failure. The up limit switches are used to sense whether the carrying boards are stopped at their routine slots, which the level switches can't finish. Maybe one carrying board stuck between two layers. Only do all the upper layers' carrying boards stop at their routine slots, the selected carrying board's lifting move is activated. A timer is also set into the lifting control, with the same function as traversing timer. The elevator carries the vehicle down to the ground, release the hook, now the photoelectrical signal shut down, and waiting for the owners to take their vehicle. On driving away the vehicle and operator's confirming the photoelectrical signal resumes, the carrying board back to its slot from the down way.Figure 4. The flowchart of the taking and saving procedureB. SAVING PROCEDUREThe saving process is based on taking procedure, so they are familiar; the only difference is the hook move.Ⅳ. SOFTWARE PROGRAMMING AND PROGRAMMING ENVIRONMENTA.SOFTWARE PROGRAMMING ENVIRONMENT AND ITS LANGUAGEIn this system, we choose Omron CX-ONE 3.0 to program the PLC. The language for programming is classic ladder diagram. On considering the stereo garages are installed in different condition and requirement of different users, the scale of the stereo garages should be flexible, for example different layers or slots. In order to meet the different scales requirements, the program is modularized, only need to change the I/O ports, the logical relations in the ladder diagram are fixed. In this way, it is not only with highly compatibility but also shortens the period to develop relevant designs and make it easier to debugging and repair.B.MODULARIZED PROGRAMConditional jumps are widely used in the programming; the entire program consists of different modules, on certain conditions, the program jumps.As illustrated before, there are only two movements for a carrying board, lifting or traversing, beside the boards of first and top layers. The condition for the fifth could traverse is all the upper layers slots' up limiting switches closed. Then "Traverse OK" is activated, and then the program will make analysis of the operation until meet set conditions, the program jumps. For the lifting movements are always with the downward movements, so program the downward standards, the system will run. The entire program is programmed with this method, above the passage, is only a traversing OK and vertical move OK module. Similarly, modules of a fixed slot, for example slot "21". "21 Traversing Move", "21 Vertical Move"; for whole system, "Emergency Stop and Protection", "Button Select", "System Monitor" and "Debugging" modules, which cooperate with each other to accomplish the control and monitor.Figure 5. Monitoring and Display module (Segment)Fig. 5 is the segment program of the monitoring module, all the motors' protection series connected, so are the phase sequence protection and margin switches. Any of them change; PLC will transfer messages to the screen, which displays. Meanwhile, cults off the main KM, the system stops.Ⅵ.A BRIEF SUMMARYThis paper introduces lift shifting type six floors of three-dimensional garage design methodbased on Omron CP1HX40DR-A controller, completing the requirements of three-dimensional garage for city vehicle management toward the direction of automation and centralization. This design can be used to restore occupied pavement, reduce preempting, and ensure safety, in addition that it could reduce traffic congestion time, reducing the injury. On this basis, the problem has been thoroughly eliminated, including various vehicles disorderly stopping and parting in disorder, and the appearance of parking places with dirty, disorderly and poor, thus protecting vehicles away from lost, being damaged and stolen. Finally, the road is giving back to the vehicles and pedestrians, the lawn to the green space, the environment of the neat civilization life to the modern metropolis.The development cycle has been greatly shortened, based on the design about three-dimensional garage design of PLC controller. This is also a kind of inevitable of the electrification, digital and automation advancement. The thoughts and methods of this design can be applied to other scale garage and relevant problems of design.REFERENCES[1] [1] Huo Gang. Application and programmer of the CP1HPLC. China Machine Press [M], 2009.1[2] [2] Omron Power program. Omron Corporation (China), 2008[3] [3] BoSen Ren.General situation of Chinese mechanical parking equipment. Celebrated manufacturers of parking equipment and peripherals directory [J] :PP5-7[4] [4] Lekang Yu Dongxiao Zuo.The development of mechanical parking. [J] Technology and management of construction machinery. 1999 1:PP 30-32[5] [5] Fuen Zhang … Younai Wu.Principle … design … set up and maintenance of AC variable speed elevator. [M] China Machine Press 1999中文译文基于欧姆龙可编程序控制器的6层立体车库设计Zhuoran Zhang 电气工程武汉理工大学武汉，中国电子邮件：Harry zzr@Zhe Mao, Hailing Wan 电气工程武汉理工大学武汉，中国电子邮件：maozhe998@摘要：随着现代社会的快速发展，许多城市的车辆数量正在一直以指数的速度快速增加，特别是私家车。

立体停车库国外文献

Multi-lifting and transferring parking control systemAbstract: Describes a multi-storey parking lifting and transferring the operation principle and structure characteristics, describes the composition of the control system, PLC control of the implementation and control software design, implementation of the automatic parking controlCurrent common mechanical parking there lifting and transferring, vertical circular, multi-layer circular, horizontal circular, flat mobile, laneway, vertical lifting type and 8 simple movements, lifting and transferring them Class of its simple structure, easy operation, safe and reliable, and low cost advantages of market share in the domestic garage 83% market share. Programmable Logic Controller (PLC) set of computer technology, automation technology, communication technology as a whole, reliability, cost-effective, compact design, good scalability, easy to operate, so the automatic parking system, usually as an electronic control core. For larger systems, can also use the industrial field bus (Profibus or Devicenet) constitute the PLC network, and automatic control. Structural features: pan bottom only, top only lift, but also lifting the middle layer can shift. In addition to the top, the middle layer and the bottom have to be an empty parking spaces reserved for use in and out of vehicle movements. When the bottom and out of car parking spaces, no other carrier can move directly out of car; the middle layer, top and out of car, one should first determine whether the location corresponding to the bottom of the empty, not empty pan to make the appropriate treatment, until the bottom can be conducted for the empty car moves down and out, up and out of cars and then back to the original position. General principles of motion are: lifting reset, translation is not reset. Figure 1 is a 3x3 sport lifting and transferring parking schematic. Underground layout, semi-ground structure of semi-underground garage layout is similar.1 garage operation principle of lifting and transferringLifting and transferring parking spaces for 2-dimensional matrix structure can be designed for multi-layer, multi-column. Closed chain devices and due to time constraints and out of cars, usually 2 to 4 layers (the state of up to 4 layers) to 2, 3 layer in the majority, according to the number of parking garage the size of the decision. Garage located on the ground, can also be located in the ground, or half of the set in half in the ground floor. The specifications of steel frames at a certain combination of sub-grid unit can be vertically extended, sub-centralized control, but also horizontally parallel, sub-row alone control. Combination of different forms of the garage layout can be adapted to the needs of different site conditions, configuration is very flexible. Is a typical garage floor 3x3 lifting and transferring to illustrate the operation principle of the garage.Lifting and transferring parking generated by the shift tray vertical channel, to achieve high-level access to vehicles, parking lift, all the logical process control by PLC. Layout of the lifting and above ground parking structure features: the bottom can only pan, lifting the top only, but also lifting the middlelayer can shift. In addition to the top, the middle layer and the bottom must be an empty parking spaces reserved for use in and out of vehicle movements. When the bottom and out of car parking spaces, no other carrier can move directly out of car; the middle layer, top and out of car, one should first determine whether the location corresponding to the bottom of the empty, not empty pan to make the appropriate treatment, until the bottom can be conducted for the empty car moves down and out, up and out of cars and then back to the original position. General principles of motion are: lifting reset, translation is not reset.2 parking control system design2.1 The composition of the control systemParking control system with a computer monitoring system and lower machine PLC control system, the system block diagram in Figure 2. Monitoring system consists of "superior machine or network bus (optional) + PC + PLC ten on-site operator" constitutes, to the core PC, equipped with printers, audio equipment, cash registers, monitors and so on. Higher bus control machine or network, the operation, touch screen, IC card, magnetic card machines are optional parts for the further development of content, according to the actual situation in the garage size and reasonable choice. For example, modular garage more than 3x3, we can use a garage of a PLC control unit PLC together constitute more than the structure of local area network. If the size of the garage is large enough, you can also consider the equipment operation, touch screen and the IC card, magnetic card machine intelligent automatic control.Garage is divided into three control - manual, semi-automatic and fully automatic. Manual operator in the field by hand to jog each pallet control; semi-automatic PLC control panel for operating the buttons automatically by the PLC logic control; automatic access to the command given by the computer implementation of the PLC (with the requirements of "operator"). Mainly used for maintenance of manually debugging or exception handling, is the highest priority; semi-automatic or automatic mode for normal processing and out of vehicles, including semi-automatic mode takes precedence over automatic. In the case of the computer offline, PLC control panel to complete all the access to truck operators.2.2 PLC control system designPLC control system is the core of the garage, its operation can be divided into three categories: (1) diagnosis and treatment based operation; (2) Contact data on the state vo-site operation; (3) the implementation of programs and services and external users equipment, command operations. When the access operation, PLC receive and analyze the operator in the control panel button (or PC) input instructions, the IPC to make reasonable arrangements: to determine the status of detection devices, mechanical drive part of the garage read the information, feedback to the implementation of components, drag parking board to achieve its position of movement, access to complete vehicle operation and signal display (LED). The action area with light, power detectionand multiple safety systems to prevent exceptions from happening. By photoelectric detection, hardware and software signal interlocking, limit, anti-fall protection, overload protection device to ensure the security of the system running smoothly.The completion of the main PLC system tray, pallet location and operating status of the detection and access to vehicle operation. With a variety of optical switches, limit switch detection position of the state, with the contactor, relay control drag from the motor stops.That control the operation of the parking spaces sliding down a small motor and large motor, so that they achieve reversing at different times. And lift the upper layers of the sliding action and the following actions must be interlocked, that is, when the upper berth down, the following layers of berths can not be moved, and vice versa. And the upper berth only one berth for each lifting movement up and down.In order to ensure reliable and secure access to vehicles, the system should be precise positioning. Limit switch can be set to ensure that the pallet and the pallet level to the desired location to move up or down to the exact location, but to strictly limit switch interlock logic. For example, 1, 2 level limit switch in the static case, only one is broken, if the switch is closed more than 2 means that the pallet is not in place. Still in the garage, all should be fixed pallet off the hook signal (negative logic), limit switches off Layer 2 and 3 layer limit position switch is closed.To ensure the operation of loading the safety board, the insurance must be taken to drive the design and safety self-locking linked insurance design: chain drive with brake motor, no matter what happens, are in a state of self-protection; control security linked to the solenoid action must have a feedback signal, can be used to indicate whether the link has hung the tray. Photoelectric switches arranged in different positions have different functions: the bottom of the tray installed around two sides of the photoelectric switch detects whether the tray in place on the car park; placed in the tray on the diagonal of the photoelectric switch detects whether the car on a pallet; installed in parking the vehicle population of about 2 at the side of the optical switch can also be used to detect movement and parking spaces outside the errors that occur when moving abnormal situation. In case the vehicle is not well arranged, the action area are people or things, like running a car entered in unexpected circumstances such as optical switches light is cover, will give a level change in PLC signal, thus changing the PLC's input, buzzer long tone and the alarm device does not run or stop running.Also used in the garage of some sensors, smoke temperature sensor to detect the alarm off Sheng Songsheng or broken chain displacement sensors, and warning devices, emergency stop switch, the manual button, reset switch.2.3 PLC control system programming(1) control program flow chartThe vehicle control system access only to the upper (2,3, 4-layer) parkingspaces, and for the lower parking spaces, access can be opened directly into the car. Control software using the ladder language. Program flow shown in Figure 4, a description is to rely on the tray with rope or chain hanging points on the tray hanging bracket, in the stationary state, fall protection (security) hooks to hook the tray, the tray to fall, must be first increased to the highest point, remove the safety hook can be decreased.And out of different layers in the design process was used for the car, "convergence of parallel branch and" technique, the so-called parallel branches of each branch of the process refers to the simultaneous implementation of all actions to be after the end of the process, according to the corresponding execution condition, the convergence state action. Ie If you select Layer 3 tray out of vehicles, can make the floor while the second floor pan (left or right), so the system can automatically control the sequence of movement between processing equipment interlock or double output, and test control system convenient operation and fault checking can save a lot of time and improve efficiency.(2) control program optimizationBecause the movements of the upper tray to empty parking spaces to the lower before it can be to 3 floors above ground parking spaces movement, for example, a layer of empty parking spaces there are N kinds of positions, 2 layer tray down the movements of a related species N2, 3 tier tray The movement pattern may have N3 species, along with parking spaces and increase, the sharp expansion of the program will, therefore, how to find the easy way to make the program will be optimized programming of the system difficult. To layer 2, for example, stored in the variable knife overcast layer 2 needs to access the parking spaces, 1 of a N, such as the upper X (1 ≤ X ≤ N) No parking access, then Dm = X; in Dn in No storage of the lower air spaces, such as parking space number Y, then Dn = Y; making access to the vehicles, the Dm and Dn values in comparison, the result is zero, the upper spaces of the tray can move down; If the result is greater than zero, then the first empty parking spaces on the right to move the first one pallet space on the left, then repeat the process until the empty parking spaces in the upper below the required access, the parking spaces on the upper tray to the lifting movement . Process of optimizing the structure shown in Figure 5.3 access layer and 4 layers approach the car and 2 layers similar.(3) modular programmingPLC programming control program is modular forms, parking only during the operation of subroutine modules, which greatly reduces the complexity of the program to facilitate the process of change, and the expansion of parking spaces provided for the convenience. The entire process including the main program module, manual key subroutine modules, emergency stop button subroutine modules, initialization program modules, program modules to access the assignment number of parking spaces, parking space number and mobile number of parking spaces assigned program modules, programmodules tray translational motion , photoelectric switch subroutine modules, pallet lifting exercise program modules and the fault alarm subroutine modules.(4) software design in the treatment of several key issuesProgram with the state components, timers, and data memory are used with power-down protection components, power down when the system components to maintain the status before power off to save the site information, to be completed after power is interrupted to the action; when Accident occurs, press the emergency stop button to abort the operation of the system and save the scene breakpoint information; when there is an electrical or mechanical failure, such as motor overload, overheating the automatic stay system operation, concurrent sound and light alarm, and the system transferred Manually for troubleshooting.3 ConclusionLifting and transferring parking control system using PLC control, so that the whole control system reliability greatly improved, especially when the series more parking spaces, they can realize the automatic allocation of parking spaces to meet the garage control functions and performance requirements, complete achieve automatic control and out of the car. Design optimization software, the expansion makes the system more convenient parking spaces; the same time, the software design uses a "parallel branching and merging" skills, greatly reducing the time and out of cars and improve work efficiency. If the second development, increase communication module can be achieved only with the host computer communication, modern management by computer.。

智能停车场中英文对照外文翻译文献

智能停车场中英文对照外文翻译文献(文档含英文原文和中文翻译)智能停车场最近几年来汽车的动态平衡与静态管理已成为许多专家学者重点研究的新课题。

智能停车场系统为了保证车辆安全和交通方便，迫切需要采用自动化程度高、方便快捷的停车场自动管理系统，提高停车场管理水平。

现阶段的目标就是要提供满足人们工作、生活、娱乐环境更科学、规范、有效快捷、安全、方便的智能停车场自动管理系统。

停车场管理系统正在向大型化、复杂化、集成化和高科技化方向发展，智能停车场系统已经被纳入智能建筑的一个重要子系统，并且正与智能建筑的其它子系统进一步高度集成。

智能停车场管理系统采用先进技术和高度自动化的机电设备，将机械、电子计算机和自控设备以及智能IC卡技术有机地结合起来，通过电脑管理可实现车辆出入管理、自动存储数据等功能，实现脱机运行并提供—种高效管理服务的系统。

新型的智能停车场将生活理念和建筑艺术、信息技术、计算机电子技术等现代高科技完美结合，提供的是一种操作简单、使用方便、功能先进的人性化系统。

它依靠高科技，以人为本，采用图形人机界面操作方式，提供一种更加安全、舒适、方便、快捷和开放的智能化、信息化生活空间，促进了人文环境的健康发展。

1 目前国内外停车场主要有以下几种类型1．1 机械式停车场机械式停车场是国内停车场主要的一种，机械式停车场是指停车场完全由机械停车设备如曳引驱动机、导向轮、载车板、横移装置、控制柜、召唤操作盘、升降回转装置、搬运器等构成。

分为升降横移类、垂直循环类、水平循环类、多层循环类、平面移动类、垂直升降类、简单升降类等类型。

因其停车方式多样独特，具有很强的应用性。

它的主要优点有占地面积小，选型多样、可具体结合场地特点设计，也可与其他方式相结合来实施，自动化程度高，操作使用方便，管理和维护也较为容易，具有定量存车的特点。

1．2 平面停车场系统智能停车场系统平面停车场系统因其主要采取感应式IC卡读卡方式，所以也叫感应式停车场系统。

立体仓库中英文对照外文翻译文献

立体仓库中英文对照外文翻译文献(文档含英文原文和中文翻译)由一个单一的存储/检索机服务的多巷道自动化立体仓库存在的拣选分拣问题摘要随着现代化科技的发展，仓库式存储系统在设计与运行方面出现了巨大的改革。

自动化立体仓库（AS / RS）嵌入计算机驱动正变得越来越普遍。

由于AS / RS 使用的增加对计算机控制的需要与支持也在提高。

这项研究解决了在多巷道立体仓库的拣选问题，在这种存储/检索（S / R）操作中，每种货物可以在多个存储位置被寻址到。

提出运算方法的目标是，通过S/R系统拣选货物来最大限度的减少行程时间。

我们开发的遗传式和启发式算法，以及通过比较从大量的问题中得到一个最佳的解决方案。

关键词：自动化立体仓库，AS / RS系统，拣选，遗传算法。

1.言在现今的生产环境中，库存等级保持低于过去。

那是因为这种较小的存储系统不仅降低库存量还增加了拣选货物的速度。

自动化立体仓库（AS / RS），一方面通过提供快速响应，来达到高操作效率；另一方面它还有助于运作方面的系统响应时间，减少的拣选完成的总行程时间。

因此，它常被用于制造业、储存仓库和分配设备等行业中。

拣选是仓库检索功能的基本组成部分。

它的主要目的是，在预先指定的地点中选择适当数量的货物以满足客户拣选要求。

虽然拣选操作仅仅是物体在仓储中装卸操作之一，但它却是“最耗时间和花费最大的仓储功能。

许多情形下，仓储盈利的高低就在于是否能将拣选操作运行处理好”。

（Bozer和White）Ratliff和Rosenthal，他们关于自动化立体仓库系统（AS/RS）的拣选问题进行的研究，发明了基图算法，在阶梯式布局中选取最短的访问路径。

Roodbergen 和de Koster 拓展了Ratliff 和Rosenthal算法。

他们认为，在平行巷道拣选问题上，应该穿越巷道末端和中间端进行拣选，就此他们发明了一种动态的规划算法解决这问题。

就此Van den Berg 和Gademann发明了一种运输模型(TP)，它是对于指定的存储和卸载进行测算的仪器。

自动化立体仓库应用(英文加翻译)

毕业设计（论文）外文文献题目：自动化立体仓库应用及其特点院（系）: 中原工学院继续教育学院专业: 工业自动化姓名：指导老师：填表日期: 2016年4月Application of Automatic Warehouse and its characteristics overhead storage for short Top shelf storage Generally refers to the use of layers，a dozen or even several-storey layer shelf storage unit goods，material handling equipment with the corresponding goods inbound and outbound warehouse operations。

As such storage can make full use of space for storage，Guchang image to be known as the "Warehouse。

”1.1Automatic WarehouseHigh overhead for short shelf storage warehouse. Generally refers to the use of layers，a dozen or even several-storey layer shelf storage unit goods, material handling equipment with the corresponding goods inbound and outbound warehouse operations. As such storage can make full use of space for storage，Guchang image to be known as the ”Warehouse。

[VIP专享]立体仓库--文献翻译

Industrial RobotsA robot is an automatically controlled, reprogrammable, multipurpose, manipulating machine with several reprogrammable axes, [1]which may be either fixed in place or mobile for use in industrial automation applications.The key words are reprogrammable and multipurpose because most single-purpose machines do not meet these two requirements. The term “reprogrammable” implies two things: The robot operates according to a written program, and this program can be rewritten to accommodate a variety of manufacturing tasks. The term “multipurpose” means that the robot can perform many different functions, depending on the program and tooling currently in use.Over the past two decades, the robot has been introduced into industry to perform many monotonous and often unsafe operations. Because robots can perform certain basic tasks more quickly and accurately than humans, they are being increasingly used in various manufacturing industries.Structures of RobotsThe typical structure of industrial robots consists of 4 major components: the manipulator, the end effector, the power supply and the control system, as shown in Fig.17.1.Fig.17.1 Structures of RobotsThe manipulator is a mechanical unit that provides motions similar to those of a human arm. It often has a shoulder joint, an elbow and a wrist. It can rotate or slide, stretch out andwithdraw in every possible direction with certain flexibility.The basic mechanical configurations of the robot manipulator are categorized as cartesian, cylindrical, spherical and articulated. A robot with a cartesian geometry can move its gripper to any position within the cube or rectangle defined as its working volume. Cylindrical coordinate robots can move the gripper within a volume that is described by a cylinder. The cylindrical coordinate robot is positioned in the work area by two linear movements in the X and Y directions and one angular rotation about the Z axis. Spherical arm geometry robots position the wrist through two rotations and one linear actuation. Articulated industrial robots have an irregular work envelope. This type of robot has two main variants, vertically articulated and horizontally articulated.The end effector attaches itself to the end of the robot wrist, also called end-of-arm tooling. It is the device intended for performing the designed operations as a human hand can. End effectors are generally custom-made to meet special handling requirements. Mechanical grippers are the most commonly used and are equipped with two or more fingers. The selection of an appropriate end effector for a specific application depends on such factors as the payload, environment, reliability, and cost.The power supply is the actuator for moving the robot arm, controlling the joints and operating the end effector. The basic types of power sources include electrical, pneumatic, and hydraulic. Each source of energy and each type of motor has its own characteristics, advantages and limitations. An ac-powered or dc-powered motor may be used depending on the system design and applications. These motors convert electrical energy into mechanical energy to power the robot. Most new robots use electrical power supply. Pneumatic actuators have been used for high speed, nonservo robots and are often used for powering tooling such as grippers. Hydraulic actuators have been used for heavier lift systems, typically where accuracy was not also required.The control system is the communications and information-processing system that gives commands for the movements of the robot. It is the brain of the robot; it sends signals to the power source to move the robot arm to a specific position and to actuate the end effector. It is also the nerves of the robot; it is reprogrammable to send out sequences of instructions for all movements and actions to be taken by the robot.An open-loop controller is the simplest form of the control system, which controls the robot only by following the predetermined step-by-step instructions. This system does not have a self-correcting capability. A close-loop control system uses feedback sensors to produce signals that reflect the current states of the controlled objects. By comparing those feedback signals with the values set by the programmer, the close-loop controller canconduct the robot to move to the precise position and assume the desired attitude, and the end effector can perform with very high accuracy as the close-loop control system can minimize the discrepancy between the controlled object and the predetermined references.Robot ApplicationsThe robot is a very special type of production tool; as a result, the applications in which robots are used are quite broad. These applications can be grouped into three categories: material processing, material handling and assembly.In material processing, robots use tools to process the raw material. For example, the robot tools could include a drill and the robot would be able to perform drilling operations on raw material.Material handling consists of the loading, unloading, and transferring of workpieces in manufacturing facilities. These operations can be performed reliably and repeatedly with robots, thereby improving quality and reducing scrap losses.Assembly is another large application area for using robotics. An automatic assembly system can incorporate automatic testing, robot automation and mechanical handling for reducing labor costs, increasing output and eliminating manual handling concerns. Fig.17.2 is SCARA Robot for automatic assembly.Fig.17.2 SCARA Robot for Automatic Assembly工业机器人机器人是一种自动控制的，可重复编程的，多功能的，由几个可重复编程的坐标系来操纵机器的装置，它可以被固定在某地，还可以是移动的以在工业自动化工厂中使用。

智能停车场系统中英文对照外文翻译文献

智能停车场系统中英文对照外文翻译文献(文档含英文原文和中文翻译)原文：Intelligent parking systemAbstractThe basic concepts of the parking reservation system and parking revenue management system are discussed in this paper. The proposed intelligent’’ parking space inventory control system that is based on a combination of fuzzy logic and integer programming techniques makes ‘‘on line’’ decisions whether to accept or reject a new driver's request for parking. In the ﬁrst step of the proposed model, the best parking strategies are developed for many different patterns of vehicle arrivals. These parking strategies are developed using integer programming approach. In the second step, learn-ing from the best strategies, speciﬁc rules are deﬁned. The uniqueness of the proposed approach is that the rules arederived from the set of chosen examples assuming that the future traffic arrival patterns are known. The results were found to be close to the best solution assuming that the future arrival pattern is known.Keywords: Traffic; Uncertainty modeling; Control; Parking; Fuzzy logic 1.IntroductionEvery day a signiﬁcant percentage of drivers in single-occupancy vehicles search for a parking space. Additionally, less experienced drivers or out-of-towners further contribute to the increase of traffic congestion. Search for a vacant parking space is a typical example of a search process. Every parking search strategy is composed of a set of vague rules. It is usually difficult to describe these rules explicitly. The type of the planned activity, time of a day, day of the week, current congestion on particular routes, knowledge of city streets, and potentially available parking places have signiﬁcant inﬂuence on a chosen parking search strategy. During the last four decades numerous parking search models have been developed (Vander Goot, 1982; Axhausen and Polak, 1991; Polak and Axhausen, 1990; Young et al., 1991a,b; saltzman, 1997; Shoup, 1997; Steiner, 1998; Thompson and Richardson, 1998; Arnott and Rowse, 1999; Tam and Lam, 2000; Wong et al., 2000; Waterson et al., 2001). In many decision-making situations in transportation (modal split, choice of air carrier, choice of airport, etc.) the competitive alternatives and their characteristics are reasonably well known in advance to the decision maker (passenger, driver). On the other hand, the drivers usually discover diffierent parking alternatives one by one in a temporal sequence. Clearly, this temporal sequence has a very strong inﬂuence on the driver's ﬁnal decision about the parking placeDuring the past two decades, traffic authorities in many cities (Helsinki, Cologne, Mainz, Stuttgart, Wiesbaden, Aalborg, Hague) havestarted to inform and guide drivers to parking facilities with real-time var-iable message signs [directional arrows, names of the parking facilities, status (full, not full, number of available parking spaces, etc.)]. Information about the number of available parking spaces could be displayed on the major roads, streets and intersections, or it could be distributed through the Internet.It is logical to ask the question about the beneﬁts of the parking guidance systems. Current practice shows that parking guidance systems usually do not change the occupancy rate or average parking duration. Drivers easily become familiar with the parking guidance systems, and majority of them use, thrust and appreciate the help of the systems. Guidance systems signiﬁcantly increase the probability of finding vacant parking space, mitigate frustration of the drivers–visitors unfamiliar with the city center, decrease the queues in front of parking garages, decrease the total amount of vehicle-miles traveled (particularly in the city centers), decrease the average trip time, energy consumption, and air pollution. Parking guidance system is a part of comprehensive parking policy and traffic management system, whose other elements are street parking control (including sanctions for the illegally parked vehicles), parking fare structure, and parking revenue management system.Parking guidance systems help drivers to ﬁnd vacant parking spaces when they are already on the network, and approaching their ﬁnal destination. Throughout this research the concepts of the parking reservation system and parking revenue management system are proposed. Such systems would help drivers to ﬁnd a vacant parking space even before beginning their trip. The proposed ‘‘intelligent’’parking space inventory control system that is based on the combination of simulation, optimization techniques, and fuzzy logic makes ‘‘real-time’’ decisions as to whether to reject or accept a new request for parking. The proposedmethodology could be applied for parking lots and parking garages in cities and at the big international airports.The paper is organized as follows:1. Parking-pricing problems are presented in Section 2. Analogies between parking problems and some other industries are presented in Section 3. The parking revenue management system is introduced in Section 4, and the Intelligent parking space inventory control system is introduced in Section 5. The algorithm to create intelligent parking spaces inventory control system is presented in Section 6. Results obtained with the ‘‘intelligent’’ parking system are given in Section 7, and Sec-tion 8 presents the concluding remarks and further research orientations.2.parking pricingIn majority of cities throughout the world drivers pay for using different parking facilities. In some instances, traffic congestion can be significantly reduced as a result of parking price. The parking revenue is usually used to cover parking facility costs (access gates, ticket printers, parking meters, parking signs, attendants), or to improve some other traffic and transportation activities. Different parking pricing strategies should be a part of the comprehensive solution approach to the complex traffic congestion problems. There is no doubt that parking pricing represents one of the important demand management strategies. For example, traffic authorities, local governments and private sector could introduce higher parking tariffs for solo drivers or for long-term parkers in congested city areas. They could provide special parking discounts to vanpoolers. Obviously parking pricing should be carefully studied in the context of the considered city area (down-town, residential, commercial, retail use areas).In some cities (Madison, Wisconsin) there are already time dependent parking fees that force commuters to switch to diffierent alternativesof public transportation . Trying to promote public transit San Francisco traffic authorities increased parking tariffs at public and commercial garages. The Chicago authorities raised parking rates few times. As a consequence, the total number of cars parked significantly decreased, as well as parking duration time. The greatest decrease was in the number of all day parkers. Authorities in Seattle signiﬁcantly reduced parking tariffs for carpool at two Seattle parking facilities in downtown . Active role in parking pricing strategies could also have employers paying for employees' parking. Employers who remove parking subsidies for the employees could significantly decrease the total number of solo drivers. The main role of any parking pricing strategy should be reducing the total number of vehicle trips during certain time periods, shifting commuters to alternative transportation modes, and to different parking locations. At the same time, when trying to implement any parking strategy, it is very important to provide enough parking space for shoppers, to provide preferential parking for residents in considered city area, to provide preferential parking for different parking locations, to consider low income families, and to protect streets in the neighborhood from illegal parking.The basic economic concepts of supply and demand should be more utilized when solving complex traffic congestion and parking problems (Vickrey, 1969, 1994; Verhoef et al., 1995). So-called value pricing is also known as congestion pricing, or variable tolling. The basic idea behind the concept of congestion pricing is to force drivers to travel and use transportation facilities more during off-peak hours and less during peak hours. The idea of congestion pricing is primarily connected with the road (drivers pay for using private, faster roads, drivers with lower vehicle occupancy pay for using High Occupancy Vehicle lanes, drivers pay more to enter city's downtown on weekdays) or airportoperators (more expensive landing fees during peak hours). In the context of parking problems, this means: (a) that different parking tariffs should exist for different users; (b) that the parking fees should increase and/or decrease few times during a day.3.Parking problems and revenue management systems: Analogies with some other industriesAirline industry, hotels, car rental, rail, cruise, healthcare, broadcast industry, energy industry, golf,equipment rental, restaurant, and other industries are utilizing revenue management concepts when selling their products (Cross, 1997). Revenue management could be described as a group of different scientiﬁc techniques of managing the company revenue when trying to deliver the right product to the right client at the right price at the right time. The roots of the revenue management are in the airline industry. The basic characteristics of the industries to which different revenue management concepts were successfully applied are: (a) variable demand over time; (b) variable asset utilization; (c) perishable assets; (d) limited resources; (e) market segmentation; (f) adding new capacity is expensive, difficult or impossible; (g) direct cost per client is negligible part of the total cost of making service available; (h) selling products in advance. The main characteristics of the parking space inventory control problems are the following:· Parking demand is variable over time.· Like hotel rooms, or restaurant chairs, parking spaces also have daily opportunity to be ‘‘sold’’ (used by clients).·Any parking lot or garage has limited number of parking spaces that can be used by drivers· Market segmentation means that different customers are willing to pay different prices for the same asset (hotel room, airline seat, seat ina rented car). Businessman wanting to park a car near a meeting point 15 minutes before the meeting would be ready to pay much higher parking fee than a pensioner planning to walk with his wife through the downtown, who made parking reservation four day in advance.· Building new garages and parking lots could be very expensive and sometimes very difficult.· Parking places can be easily reserved in advance.Introducing and developing parking reservation system (created in an Internet and cell phone environ-ment) would present further improvement in modern parking technologies. Drivers would be advised and guided before beginning of the trip, as well as during the trip. Parking reservation system should be coupled with the parking revenue management system. In this way, parking operators and traffic authorities would be able to implement different parking strategies. Once the driver is allowed to park, it is possible to implement internal garage guidance system that guides the driver to an empty parking place.4.Introducing parking revenue management systemLet us assume that we have parking reservation system. Drivers make their requests for parking at random moments of time (by phone from home, by cell phone while driving, through the Internet, etc.).A certain number of drivers would maybe cancel their reservations before beginning of the parking.These cancellations would also be made at random moments of time. Like in some other industries, a certain number of drivers would not appear in parking garage for which they have a con-ﬁrmed reservation and purchased ticket. Would these drivers be penalized for their behavior? Depending on ration between parking demand and parking supply, the answer could be ‘‘Yes’’ or ‘‘No’’.Reservation system should be ﬂexible enough allowing some drivers to appear right before wished beginning of parking, looking for an emptyspace in a garage, even though they do not have a conﬁrmed reservation. Would it be good to have few different parking tariffs? The answer is obviously ‘‘Yes’’. Drivers paying lower parking tariffs could be disabled and senior citizens, people who reserve parking space few days in advance, or HOV drivers. Drivers paying higher tariffs could be solo drivers, long term parking drivers, or drivers showing up and asking for parking without making reservation in advance. Obviously, there is a lot of possible parking pricing strategies.The stochastic nature of reservation generation and cancellation, the stochastic nature of driver show-up during reserved time slot, variety of parking tariffs, and the need to respond to drivers' requests in real time, indicate that the management of parking garage revenues represents a complex problem.In the past 30 years a relatively large number of papers have been devoted to different aspects of the air-line seat inventory control problem (Littlewood, 1972; Belobaba, 1987; Brumelle and McGill, 1993; Teodorovic et al., 2002). The model proposed in this paper is highly inspired by the developed airline yield management stochastic and/or deterministic models.Let us assume that we have few different parking tariffs. The simplest reservation system (similar to some airline reservation systems in the past) could be ‘‘distinct tariff class parking space inventories’’ (Fig. 1(a)),indicating separate parking spaces in the garage for each tariff class. In this case, once the parking space is assigned to a tariff class, it may be booked only in that tariff class or else remains unsold. There are certain advantages, as well as certain disadvantages in the case of distinct parking space inventories. In this case users paying lower tariffs would be relatively well ‘‘protected’’. In other words, this system would pay a lot of attention to the disabled person, senior citizens,people who reserve parking space few days in advance, and HOV drivers. Obvious disadvantage of the distinct parking space inventories is the fact that very often some parking spaces assigned to lower tariff users would be empty even the higher tariff users demand is very high. In other words, it would be possible to reject some drivers even all parking spaces in garage are not occupied.In case of a ‘‘nested reservation system ’’, the high tariff request will not be rejected as long as any parking spaces are available in lower tariff classes. For example, if we have four tariff classes, then there is no booking limit for class 1, but there are booking limits (BLi, i = 2, 3, . . ., m) for each of the remaining three classes (Fig. 1(b)). As we can see from Fig. 1(b), all parking spaces are always available to class1. There are always a certain number of parking spaces protected for class 1, certain number of parking spaces protected for classes 1 and 2, and certain number of parking spaces protected for classes 1, 2 and 3. If we make a request-by-request revision of booking limits, there is no longer a difference between distinct and nested reservation system.In this research (like in the paper of Teodorovic ´ et al., 2002) an attempt was made to make reservation decisions on theBL1BL2BLmCBL1=CBL2BLm (a)(b)Fig.1‘‘request-by-request’’ basis. In the scenario that we consider, we assume that there are more than two types of tariffs. The basic characteristic of the parking space inventory control model that we propose is ‘‘real-time’’ decision making about each driver request. The developed model is called an ‘‘intelligent’’ parking space inventory control system.译文：智能停车场系统摘要：本文讨论停车预订系统和停车收入管理系统的基本概念.拟议的智能停车空间的库存控制系统，基于模糊逻辑和整数规划技术相结合，使“上线”决定是否接受或拒绝新的驱动程序的停车要求。

立体车库外文-Three-dimensional garage

译文原文题目：Three-dimensional garage 译文题目：立体车库学院：电子信息学院专业班级：测控技术与仪器09级2班学生姓名：学号：原文：Three-dimensional garage1.A three-dimensional outlines garage ：Vehicles parked nowhere is the problem of the urban social, economic and transport development to a certain extent the result, Garage Equipment development in foreign countries, especially in Japan nearly 30-40 years. whether technically or in terms of experience had been a success. China is also in the beginning of the 1990s developed mechanical parking equipment, which was 10 years in the past. As many new households within the district and the parking ratio of 1:1. To address the size of parking spaces for tenants and business areas contradictions 3D mechanical parking equipment with an average size of a small motorcycle's unique characteristics, the majority of users have been accepted. Machinery garage with the traditional natural underground garage, in many respects to demonstrate its superiority. First, the mechanical garage with a prominent section of superiority. Past due to the underground garage must elapse enough lanes, the average car will occupy an area of 40 square meters, If the use of double-mechanical garage, which would enable ground to improve the utilization rate of around 80% to 90%, If using ground multi-storey (21 storeys), three-dimensional garage, 50 square meters of land area will be placed on the 40 cars, which can greatly save the limited land resources, Civil and save development costs.Mechanical garage and underground garage can be more effective than to ensure personal and vehicle safety in the garage or car kept prospective location, the entire electronic control equipment would not operate. It should be said that the mechanical garage from the management can do a thorough separation of people and vehicles.In the underground garage using mechanical parking, but also can remove the heating, ventilation, therefore, Operation of the power consumption than workers in the management of underground garage is much lower. Machinery sets are usually not in the garage, but a single from the packaging. This will give full play to its smallspace, the advantages of decentralized, Each of the residential areas or groups downstairs to make a complete circuit can be set up random mechanical parking building. This garage right now the district to solve the shortage of parking difficulty in providing convenient conditions.Currently, three-dimensional garage mainly in the following forms : lifting and transferring, tunnel-stacker, vertical-type, Vertical circulation, box-level cycle, the level of circulating round.(1) lifting and transferringLifting and transferring Garage modular design, each module can be designed into two, three, four levels, the five-story, semi-submerged in various forms, such as the number of parking spaces from a few to hundreds. This applies three-dimensional garage on the ground and underground car parks, configuration flexibility and low cost.1. Product features :1) save land, the configuration flexibility, shorter construction period.2) low prices, firefighting and exterior decoration, with a total investment on small foundations.3) use automatic control, simple structure, safe and reliable.4) access to a quick, short waiting times.5) Run a smooth, low noise.6) applies to commercial, offices, residential quarters supporting the use of car parks.2. Safety devices : anti-dropping device, a photoelectric sensor, spacing protectors, emergency stop switch.(2) - Roadway StackerAisle stacking garage used as a stacking machine tool access vehicles, All vehicles are stacking machine access, so the Stacker higher technical requirements, single stacker higher costs So aisle stacking apply to the parking garage needs a few more customers.(3) vertical GarageVertical Garage Elevator similar to the principle that both sides of the hoist layoutspaces. generally need a ground vehicle rotary tables can be saved by the driver away. Vertical Garage generally higher high (tens of meters), safety equipment, Installation precision machining requirements are very high, high cost, but has the smallest area.(4) Vertical cycleProduct features :1) covers an area of small, two berths area can stop 6-10 vehicles.2) The decoration can be added only roof, fire hydrants available.3) low prices, foundation, external decoration, fire and other small investment, short construction periods.4) use automatic control, safe and reliable operation.2.three-dimensional garage automatic control system :Large modern architectural mainstream intelligent buildings and residential communities. So auto-parking garage equipment or automatic control system will become intelligent buildings and residential communities an important component of pm. Simple, fast, easy to use, safe, reliable, and less maintenance, to provide users with a safe, easy to use environment, This is auto-parking feature of the basic equipment. All parking equipment operating conditions, vehicles parked in time, vehicle storage Malaysia, garage storage capacity. Vehicles kept high and low peaks, and other information can be transmitted through the network of intelligent control center through intelligent control center operator, and the broadcasting system and the management office of the Division linked related to early release control, management information, thus achieving all the intelligent management. Building and the Community through the intelligent control of the center could also associated with social networking functions. Information released to the collection coming out or expand utilization of the garage social and economic benefits. This will be the automation of the development direction of the garage.Solid Garage automation control system include the following five major subsystems : automatic toll collection management system automatic access systems for remote diagnosis system, automatic Gate, control security system.Subsystems are more unified control of the central control room, for customers planning Garage form of management, Published garage inventory capacity, traffic control program.(1) Automatic Toll Management SystemAutomatic charging non-contact IC cards. IC cards with the long-card two. For fixed users, the issue of long-term cards, the cost of fixed users pay management fees paid together; On the temporary users, issue stored-value cards, namely : the user fees paid cards exist within each parking card reader automatically deducted from the cost.(2) Automatic vehicle access systemAutomatic vehicle access system generally small PLC control. including the identification card number and mobile disc contains two cars process. Users enter the garage at the entrance to Swiping cards, reader data automatically transmitted to the PLC control system, PLC system through the judgment card number and automatically set the corresponding site mobile trucks and vehicles to the handover location, the garage door opened, shorten the time access to cars. Cun truck drivers light signals in accordance with the guidelines created only when vehicles parked in a safe location, Parking will be normal light-Kai. Access car after the completion of the garage doors shut down automatically. Mobile site contains car, the system in strict accordance with the various signal detection mobile state, including long signal detection, Detection in place, the position detection limit, officers hit detection, emergency stop signal detection. If cars are running plate is not in place or vehicle length in excess of the permitted length of the garage, all vehicles disc will contain no action, If detected emergency stop signal to stop all action until the emergency stop signal disappeared. Above signals are hardware signals, in addition, the software can also be installed to control signal protection, such as the protection of the time, to ensure that the damage due to hardware failure to signal equipment and the main guarantee for the safety of vehicles.(3) remote diagnosis systemControllers can spot card, hubs and other network equipment and control center connected to the LAN, MODEN through remote management, monitoring theoperation of the scene, when the scene failure, in the control center can be addressed to facilitate the management, e-office security personnel.(4) Automatic GateIn the garage entrance of the no-contact reader, and the Gate of coil users in the garage entrances Swiping cards, the system automatically discriminant validity of the card, if valid, the Gate open automatically, through induction coils, Automatic self-closing fence; If invalid, the Gate is not open, and sound and light alarm.(5) monitoring security systemMonitoring security system is in the central control room for monitoring and controlling the operation of the garage scene conditions. It has motion detection, license plate recognition, network connections, different types of alarm systems linkage, and other functions, can be achieved unguarded.System :Video monitoring function : the garage entrances, and the duty, the main segments within the garage installation focusing cameras, On the larger spaces installation spherical platforms, in order to achieve all-round garage on real-time monitoring. If the garage light conditions of the poor would use black-and-white cameras.Motion Detection functions : setting up the night in the garage of motion detection region, detecting when there are a moving target, Motion Detection and Alarm function remind staffs.LPR functions : it can set up the garage light vehicle license plates, vehicle. When the light vehicles entering the garage regional surveillance, the system automatically cross-referenced with images of a very odd situation, issued a warning signal, and automatic switching and record their images.Alarm linkage functions : all can move even the police mainframe, If activated Relay acousto-optic warning issued notice of security personnel to voluntarily disarm Gate interception of vehicular access.Digital video functions : it with a continuous record of what happened in the garage, can be synchronized intervals over images arbitrary choice of the overall image toenlarge and local amplification, recording, playback, backup can be conducted all kinds of information.Reportedly, has begun an increasing number of residential quarters began to use a mechanical garage. Taking into account the cost and maintenance, the majority of the district is a multi-storey lifting and transferring parking equipment, mass storage mechanical garage also rarely. Lifting and transferring Garage Equipment parking flow indicate the following :1) The sense of light yellow instructions garage operation.Red lamp was ongoing operating instructions, please wait; Green light is currently no operating instructions, can operate; yellow light instructions were to fail, the garage can not work.2) Stores in operationDrivers of vehicles entering from the garage entrance. At the entrance of non-contact sensors Reader former regional shaken following their IC cards, induction process completed, the fence automatically rises driver drove into the garage. Vehicles, fencing to shut down automatically. Card is the controller to read spaces, corresponding to the parking garage containing cars moved to the site automatically transfer vehicle location, Automatic garage door open units. Car drivers entering and parking in place, Latin hand brake, alighted out of the garage, using IC cards in the garage exit Huang about IC cards Garage door modules to shut down automatically. Completed deposit truck operators.3) the operatorDrivers entering the garage at the entrance to the non-contact sensors Reader former regional shaken following their IC cards Controller automatically read spaces, corresponding to the parking garage containing cars moved to the site automatically transfer vehicle location, Automatic garage door open modules, drivers entering the garage and drive out, in the garage exit of the automatic reader before induction regional dazzle your own IC cards, sensors finished, the reader receive information, Host controller automatically recorded, prepaid, automatically raising the fence, the driver drove the playing field, appeared after fencing to shut down automatically.Meanwhile, Controller automatically read spaces, corresponding to the garage door unit shut down automatically. Vehicle operation finished.Garage in the course of operation, a complete self-protection devices. A series of photoelectric switches, proximity switches, trip switches and other vehicles on site contains accurate operation in place to play a decisive role; Falling unique defense installations, broken rope warning device, speeding vehicle protection device to protect the security role played. Detection of long vehicles, vehicle parking is not in place detection, and personnel into a detection signal of vehicles and the safety play a decisive role.Garage is a hot topic in large and medium-sized cities. State Economic and Trade Commission, "city Solid Garage" as "the recent focus on the development of technology industries." With the continuous increase in domestic cars, trucks contradictions exist in public places and communities, the problem will become increasingly conspicuous green vehicles crowded. in the awareness of the environment and enhance the quality of life when the "garage" is becoming a hot topic. Automated machinery garage will be in the development of new developments and commercial agents.译文：立体车库车辆无处停放的问题是城市的社会、经济和交通发展到一定程度的结果，车库设备在国外发展，尤其是在日本近30—40年。

立体车库发展的现状中英文翻译资料

Status of the development of solid garageStereo garage is the storage which is used for automatic parking and scientific storage of kinds of automobile. As the quantity of urban automobile has increased continuously in nowadays ,the hard-to-park problem has become a common phenomenon. Mechanical stereo garage can use land resource sufficiently and bring space advantage into play,and maximize the number of parking cars. It has become an important way for static traffic problem of cities. The issue studies the type mechanical parking system which named up-down and translation stereo garage, and regards of the two factors of manufacture and operational efficiency synthetically.On the basis of investigation on current situation and developing trend of garage in domestic and abroad, we choose three-layer and three-formulistic garage structure as the research model. According to the form of the dragging-forms of multi player up-down and translation ear-base , it is made of three pares :part of ear-base strucrure part of driving-framework and part of control system. The paper simply introduces main structure and characteristics of garage and also gives a short introduction to its control system. The finite element reliability checking of steel structure of garage is utilized according to the operation principle of up-down and translation stereo garage, the mechanics was used to comprehensively analyze the up-down and translation stereo garage , the mechanics was used to comprehensively analyze the up-down and translation stereo garage. Including intension of the framework structure axes,etc. The paper adopted PLC as control system in designing the up-down and translation stereo garage, PLC software of OMRON company was used to weave the program of control system, through debugging running. The result proved that adopted PLC as control system is simple and easy to realize . The characteristic of stabilization ,credibility , speediness and high capability made the control system very perfection of mechanical parking systems-general safety requirement and the facts of the up-down and translation sterel garage rhe paper introduced some safety technique which was used in the up-down and translation stereo garage. This can ensure absolute safety for car and make the whole stereo garage safety and running smooth .On the base of the project "Optimal design of the mechanisms in the stereoscopic garage"，some mechanisms in the lift park garage has been designed optimally. At the first, we established the running mode and the structure of the mechanisms adapted to the running mode. And then, we chose the immobile comb as the parking space andthe steel structure framework as support, the optimal design on the two mechanisms was carried through. The optimal design on the immobile comb and the steel structure framework was carried through with augmented multipliers method. At the end, the result of the optimal design is that the immobile comb will be more reasonable and decreased the whole weight of the garage and the load of the steel structure framework, and the weight of the steel structure framework become more light.With the rapid development of shanghai,the settlement of the difficult of parking of shanghai has already reached the very urgent stage. In the city center where every inch of land is precious ,especially the area which such vehicles as the hotel ,market ,shopping center location,etc. Dr.eye:concentrate,can only develop to the sky,to underground,so has built and already to a great deal of three-dimensional garage parkings reached the essential stage,at the same time there are many advantages too in the three-dimensional garage parking.First ,economize the space. Generally speaking,its floor space is about 1/2~1/25 of the level parking area,machinery type "three-dimensional" .The garage can both be installed with ground underground,the greatest advantage can fully utilize the small area to develop to the high altitude, try one's best to store more vehicles,the place that the land resource in short supply,the vehicle is big in capacity to park in the way best. For example,are most suitable for using "vertical circulation" on the limited residential quarter ground on the space three-dimensional garage of the type. 8 storeys of every groups of this kind of garage,that is to say,only parked the three-dimensional garage built up on the area of a car and park 8 cars originally.Second,automation is controlled,easy to use. The three-dimensional automatic degree of garage parking is very high,can hoist or lower the rotatory type,for example,district residents come off duty and park,so long as according to the number that the brass-wind instrument is corresponding with the parking stall,this parking stall will be rotated and landed to the ground,after the car owner parks the good vehicle,and then according to the number ,the parking stall circles round and rises,restored to the throne again. From a complete set and install the intellectual administrative system of the parking area after installing the large-scale underground parking of the three-dimensional garage,go on one on duty to manage hour through professional staff member of technical training.Third ,three-dimensional garage build cost lower than the traditional parking area greatly. It is reported, the occupation of land and building cost in the traditional parking area is quite high. Do not generally get on very well,ordinary each occupation of land in the parking stall,about 15 square meters,the floors,the floor space of each parking stall of underground parking is above 25 square meters at least on the ground. If use the three-dimensional garage parking, can park one group and 8 parking stalls of three-dimensional garage parking on the vacant lot of 30 square meters,the average floor space of each parking stall is less than 4 square meters. In respect to building cost,the house property developer of the district builds an underground parking stall to need to invest 60,000-80,000 yuan at present,the construction cost of some top-grade underground parking stalls of office building is up to more than ten ten thousand yuan especially. If install the three-dimensional garage,is it increase parking stall is can cost stand thin to reach 50,000-60,000 yuan each construction of parking stall to try one's best in a situation that the area of space does not change.Fourth ,it is safe and reliable and beautifying the environment. Allocate the automatic detection system,various kings of sage organizations, autoalarm ,fire-fighting system and other stick precautions facility. The automobile will not damage,loses. Suit measures to local conditions, utilize fragmentary vacant lot,shape beautiful garage beyond mix,beautify the urban environment.立体车库发展的现状立体车库是专门实现各种车辆的自动停放及科学寄存的仓储设施。

(完整word版)升降横移立体车库英文文献原文

Status of the development of solid garageStereo garage is the storage which is used for automatic parking and scientific storage of kinds of automobile. As the quantity of urban automobile has increased continuously in nowadays ,the hard-to-park problem has become a common phenomenon. Mechanical stereo garage can use land resource sufficiently and bring space advantage into play and maximize the number of parking cars. It has become an important way for static traffic problem of cities. The issue studies the type mechanical parking system which named up-down and translation stereo garage, and regards of the two factors of manufacture and operational efficiency synthetically.On the basis of investigation on current situation and developing trend of garage in domestic and abroad, we choose three-layer and three-formulistic garage structure as the research model. According to the form of the dragging-forms of multi player up-down and translation ear-base, it is made of three pares -part of ear-base structure part of driving-framework and part of control system. The paper simply introduces main structure and characteristics of garage and also gives a short introduction to its control system. The finite element reliability checking of steel structure of garage is utilized according to the operation principle of up-down and translation stereo garage, the mechanics was used to comprehensively analyze the up-down and translation stereo garage the mechanics was used to comprehensively analyze the up-down and translation stereo garage. Including intension of the framework structure axes etc. The paper adopted PLC as control system in designing the up-down and translation stereo garage, PLC software of OMRON company was used to weave the program of control system, through debugging running. The result proved that adopted PLC as control system is simple and easy to realize. The characteristic of stabilization ,credibility , speediness and high capability made the control system very perfection of mechanical parking systems-general safety requirement and the facts of the up-down and translation stereo garage the paper introduced some safety technique which was used in the up-down and translation stereo garage. This can ensure absolute safety for car and make the whole stereo garage safety and running smooth .On the base of the project "Optimal design of the mechanisms in the stereoscopic garage"，some mechanisms in the lift park garage has been designed optimally. At the first, we established the running mode and the structure of the mechanisms adapted to the running mode. And then, we chose the immobile comb as the parking space andthe steel structure framework as support, the optimal design on the two mechanisms was carried through. The optimal design on the immobile comb and the steel structure framework was carried through with augmented multipliers method. At the end, the result of the optimal design is that the immobile comb will be more reasonable and decreased the whole weight of the garage and the load of the steel structure framework, and the weight of the steel structure framework become more light.With the rapid development of shanghai ,the settlement of the difficult of parking of shanghai has already reached the very urgent stage. In the city center where every inch of land is precious ,especially the area which such vehicles as the hotel ,market ,shopping center location ,etc. Dr.eye.concentrate ,can only develop to the sky ,to underground ,so has built and already to a great deal of three-dimensional garage parking reached the essential stage ,at the same time there are many advantages too in the three-dimensional garage parking.First ,economize the space. Generally speaking ,its floor space is about 1/2~1/25 of the level parking area ,machinery type "three-dimensional" .The garage can both be installed with ground underground ,the greatest advantage can fully utilize the small area to develop to the high altitude, try one's best to store more vehicles ,the place that the land resource in short supply ,the vehicle is big in capacity to park in the way best. For example ,are most suitable for using "vertical circulation" on the limited residential quarter ground on the space three-dimensional garage of the type. 8 storey s of every groups of this kind of garage ,that is to say ,only parked the three-dimensional garage built up on the area of a car and park 8 cars originally.Second ,automation is controlled ,easy to use. The three-dimensional automatic degree of garage parking is very high ,can hoist or lower the rotatory type ,for example ,district residents come off duty and park ,so long as according to the number that the brass-wind instrument is corresponding with the parking stall ,this parking stall will be rotated and landed to the ground ,after the car owner parks the good vehicle ,and then according to the number ,the parking stall circles round and rises ,restored to the throne again. From a complete set and install the intellectual administrative system of the parking area after installing the large-scale underground parking of the three-dimensional garage ,go on one on duty to manage hour through professional staff member of technical training.Third ,three-dimensional garage build cost lower than the traditional parking area greatly. It is reported, the occupation of land and building cost in the traditional parking area is quite high. Do not generally get on very well ,ordinary each occupation of land in the parking stall ,about 15 square meters ,the floors ,the floor space of each parking stall of underground parking is above 25 square meters at least on the ground. If use the three-dimensional garage parking, can park one group and 8 parking stalls of three-dimensional garage parking on the vacant lot of 30 square meters ,the average floor space of each parking stall is less than 4 square meters. In respect to building cost ,the house property developer of the district builds an underground parking stall to need to invest 60,000-80,000 yuan at present ,the construction cost of some top-grade underground parking stalls of office building is up to more than ten ten thousand yuan especially. If install the three-dimensional garage ,is it increase parking stall is can cost stand thin to reach 50,000-60,000 yuan each construction of parking stall to try one's best in a situation that the area of space does not change.Fourth, it is safe and reliable and beautifying the environment. Allocate the automatic detection system, various kings of sage organizations, autoalarm , fire-fighting system and other stick precautions facility. The automobile will not damage , loses. Suit measures to local conditions, utilize fragmentary vacant lot , shape beautiful garage beyond mix ,beautify the urban environment.。

(完整版)外文翻译改立体车库(可编辑修改word版)

本科毕业设计外文文献及译文文献、资料题目:Specification. Analysis andVerification of an AutomatedParking Garage文献、资料来源：谷歌学术文献、资料发表（出版）日期：2005院（部）机电工程学院专业：机械工程及自动化班级：机械112姓名：江治国学号：2011071154指导教师：刘辉翻译日期：2015.3.10外文文献:Speciflcation^ Analysis and Verification of an Automated Parking Garage Aad Mathijssen，A. Johannes PretoriusAbstractIn this report we discuss the specification, analysis and verification of an automated parkinggarage in mCRL2, a process algebra with data. We view the parking garage as a system that weconceplually divide into three layers: a logical layer, a safety layer and a hardware abstractionlayer. This allows us to abstract from implementation details (hardware abstraction layer) andalgorithm design (logical layer). Instead, we are able to focus on the specification of acommunication interface between these two layers that only allows safe system behavior. Thisinterface constitutes the safety layer. For the safety layer, we identify and fonnuiate a number of requirements. These are verified and reported on. We also discuss the analysis of the specificationof the safety layer with a simple custom visualization tool. This tool was implemented as a plug-in to the mCRL2 toolset and helped us gain important insights during the specification andanalysis of the safety layer.1IntroductionDuring the past two decades process algebras have become increasingly popular tools fordescribing complex systems that interact with their environment (5]・ Such systems differ fromclassic batch processes that receive input, process the input, preduce output and then terminate. Instead, their behavior is continuously influenced by information that they receive from their environment. An automated p arking garage is a p rime exam pie of such a system. It is in op eration24 hours a day, 7 days a week; it is continuously on standby, ready to stowaway and retrieve carsfor users. Furthermore, the state of the garage is constantly changing as cars are added andremoved. At any p oint in time, this state influences which op erations are possible and how theyare executed.Process algebra allows for high-level descriptions of systems that interact with theirenvironment. A system is regarded as a number of interacting processes that together describe its behaviour. In this way a mathematical model is acquired and this is used to prove variousProperties of the system using mathematical proof techniques. The process algebra used in this report is mCRL2 [3]. It succeeds and extends pCRL [4, 5].With pCRL a large number of real-world systems have been analysed and verified- Some of the successes that pCRL has booked include the detection of an unknown deadlock in the most complex variant of the sliding window protocol [L 11], the identification of a number of errors in a distributed lifting system for trucks [2] and the discovery of two errors in a Java distributed memory impleinentation [9]. From all these experiinents we unfortunately have had to formulate the 100% rule: in 100% of the cases considered, systems turn out to contain more or less serious errors, which are not very hard to detect.An important characteristic of mCRL2 and its predecessor pCRL is the inclusion of data .Experience has shown that in real-world systems data is of parainount importance [6]. In addition to the execution of actions, it is often the case that data is stored and communicated, thus having a significant influence on system behaviour.In the remainder of this report we discuss the specification of an automated parking garage in mCRL2・ We also discuss the analysis and verification of the system and the techniques used. In section 2 we provide more details on the challenges presented by this system. In section 3 we outline the approach we have taken to address these issues and we explain how we conceplually divide the system into three layers. This allows us to concentrate on one layer, the safety layer.which we believe is essential in verifying that the system is safe. We follow this by a discussion of mCRL2 and the mCRL2 toolset in section 4. In sections 5, 6 and 7 we specify the hardware abstraction layer, the safety layer and the logical layer respectively. We treat the hardware abstraction layer and the logicallayer tersely but reveal more details of the safety layer: we provide a specification, formulate a number of safety requirements and verify these. In section 8 we describe a simple visualization plug-in for the inCRL2 toolset as well as the insights we gained from using it. Finally, we draw conclusions in section 9.2Problem descriptionThe parking garage that we are concerned with was commissioned by developers in Bremen,Germany and was designed by the Dutch comp any CVSS Automated Parking Systems. It will be realised below street level in the basement of an existing building. Access to the garage will beprovided with a vertical lift shaft that has a doorway at street leveL To use the facility, users will drive their car through this doorway into the lift. After they have exited from their car and the lift.their car will automatically be lowered to an intermediate level, rotated 180。

立体车库外文翻译原文

立体车库外文翻译原文编辑整理：尊敬的读者朋友们：这里是精品文档编辑中心，本文档内容是由我和我的同事精心编辑整理后发布的，发布之前我们对文中内容进行仔细校对，但是难免会有疏漏的地方，但是任然希望（立体车库外文翻译原文）的内容能够给您的工作和学习带来便利。

同时也真诚的希望收到您的建议和反馈，这将是我们进步的源泉，前进的动力。

本文可编辑可修改，如果觉得对您有帮助请收藏以便随时查阅，最后祝您生活愉快业绩进步，以下为立体车库外文翻译原文的全部内容。

AUTOMATED PARKING: STATUS IN THE UNITED STATESADVANTAGES AND CRITERIARICHARD S。

BEEBE, DIRECTORPARKING AND TRANSPORTATION PLANNINGCONSULTING ENGINEERS GROUP， INC.55 E。

EUCLID AVE.， MT。

PROSPECT, IL 60056USAPRESENTEDATWORLD PARKING SYMPOSIUM IIIST. ANDREWS, SCOTLAND: JUNE 25, 2001AUTOMATED PARKING – THE ENVIRONMENTALSOLUTION TO THE URBAN PARKING SHORTAGEADVANTAGES AND CRITERIAGUIDELINES TO AUTOMATED GARAGE DEVELOPMENT♦The current state—of-the-art automated parking systems • Types• Capacities• Operating Systems• Site Area Criteria♦ Financial/Operating Advantages• Land Area and Savings•Operation’s Savings• Cost Features of Vehicle/Patron Security• Time and Motion♦ Environmental Advantages• Reduced Miles of Interior Travel• Reduced Emissions Production• Reduced Noise Generation• Reduced Construction Products and Impacts of Construction Activity ♦ System Applications• Location – Freestanding or Inside Buildings• Capacity and Structure Design• User Populations and Specific Needs• Traffic and Exterior Conditions♦ Typical Installations• Above Ground• Below Ground• Site and Operating Statistics♦ Movement Toward System Recognition/Criteria for Development• Parking Interests• Potential User Interests• International Media Attention• Product PromotionHISTORY OF MECHANICAL PARKING IN THE U.S. AND ITS STATUS IN 2001INTRODUCTIONMechanical parking systems were first introduced in the U。

机械车库外文翻译外文文献英文文献立体车库

The Stereo GarageAn overview of the stereo garageVehicles parked nowhere is the problem of the urban social, economic and transport development to a certain extent the result, Garage Equipment development in foreign countries, especially in Japan nearly 30-40 years. Whether technically or in terms of experience had been a success. China is also in the beginning of the 1990s developed mechanical parking equipment, which was 10 years in the past. Because a lot of new residents in the district with the ratio of 1:1. To address the size of parking spaces for tenants and business areas contradictions 3D mechanical parking equipment with an average size of a small motorcycle's unique characteristics, the majority of users have been accepted.Compared with the traditional natural underground garage, Machinery garage demonstrates its superiority in many respects. First, the mechanical garage has a prominent section of superiority. Past due to the underground garage must elapse enough lanes, the average car will occupy an area of 40 square meters, If the use of double-mechanical garage, which would enable ground to improve the utilization rate of around 80% to 90%, If using ground multi-storey (21 storey), three-dimensional garage, 50 square meters of land area will be placed on the 40 cars, which can greatly save the limited land resources, Civil and save development costs.To underground garage, Mechanical garage can be more effective to ensure personal and vehicle safety in the garage or car kept prospective location, the entire electronic control equipment would not operate. It should be said that the mechanical garage from the management can do a thorough separation of people and vehicles.In the underground garage using mechanical parking, it also can remove the heating ventilation; therefore, Operation of the power consumption than workers in the management of underground garage is much lower. Mechanical garage don't usually do complete system, but as a single machine containers. This will give full play to its small space, the advantages of decentralized, Each of the residential areas or groups downstairs to make a complete circuit can be set up random mechanical parking building. This garage of the district can solve the shortage of parkingdifficulty in providing convenient conditions right now.Currently, three-dimensional garage mainly in the following forms: lifting and transferring,aisle stacking garage, vertical garage, vertical cycle, box-level cycle, the level of circulating round.1.1.1 Lifting and transferringLifting and transferring Garage modular design, each module can be designed into two, three, four levels, the five-story, semi-submerged in various forms, such as the number of parking spaces from a few to hundreds. Three-dimensional garage applies to the ground and underground car parks, configuration flexibility and cost is low.1. Product features:1) Save land, the configuration flexibility, and shorter construction period.2) Low prices, firefighting and exterior decoration, with a total investment on small foundations.3) Use automatic control, simple structure, safe and reliable.4) Access to a quick, short waiting time.5) Run a smooth, low noise.6) Applies to commercial, offices, and residential quarters supporting the use of car parks.2. Safety devices: anti-dropping device, a photoelectric sensor, spacing protectors, emergency stop switch.1.1.2 Aisle stacking garageAisle stacking garage used as a stacking machine tool access vehicles. All vehicles are stacking machine access, so the technical requirements for stacker higher, a single stacker cost is higher. So aisle stacking apply to the parking garage needs a few more customers.1.1.3 Vertical GarageVertical Garage Elevator similar to the principle that both sides of the hoist layout spaces. Generally need a ground vehicle rotary tables can be saved by the driver away. Vertical Garage generally higher high (tens of meters), safety equipment,Installation precision machining requirements are very high, high cost, but has the smallest area.1.1.4 Vertical cycleProduct features:1) covers an area of small; two berths area can stop 6-10 vehicles.2) The decoration can be added only roof, fire hydrants available.3) Low prices, foundation, external decoration, fire and other small investment, short construction periods.4) Use automatic control, safe and reliable operation.2.2.1 The stereo garage automatic control systemThe modern large-scale building mainstream is intelligent mansion and community. So, automated parking equipment or garage automatic control system will become intelligent mansion and an important part of community. Simple, fast, easy to use, safe, reliable, and less maintenance, to provide users with a safe, easy to use environment, This is auto-parking feature of the basic equipment. All parking equipment operating conditions, vehicles parked in time, vehicle storage Malaysia, garage storage capacity. Vehicles kept high and low peaks, and other information can be transmitted through the network of intelligent control center through intelligent control center operator, and the broadcasting system and the management office of the Division linked related to early release control, management information, thus achieving all the intelligent management. Building and the Community through the intelligent control of the center could also associate with social networking functions. Information released to the collection coming out or expands utilization of the garage social and economic benefits. This will be the automation of the development direction of the garage.Solid Garage automation control system include the following five major subsystems: automatic toll collection management system automatic access systems for remote diagnosis system, automatic Gate, control security system.Subsystems are more unified control of the central control room, for customers planning Garage form of management, Published garage inventorycapacity, traffic control program.2.1.1 Automatic Toll Management SystemAutomatic charge adopts contactless IC card. IC card points long-term card and the stored-card. For fixed users, the issue of long-term cards, the cost of fixed users pays management fees paid together; on the temporary users, issue stored-value cards, namely: the user fees paid cards exist within each parking card reader automatically deducted from the cost.2.1.2 Automatic vehicle access systemAutomatic vehicle access system is generally controlled by small PLC. Including the identification card number and mobile disc contains two cars process. Users enter the garage at the entrance to Swiping cards, reader data automatically transmitted to the PLC control system, PLC system through the judgment card number and automatically set the corresponding site mobile trucks and vehicles to the handover location, the garage door opened, shorten the time access to cars. Truck drivers light signals in accordance with the guidelines created only when vehicles parked in a safe location, Parking will be normal light-Kai. Access car after the completion of the garage doors shut down automatically. Mobile site contains car, the system in strict accordance with the various signal detection mobile state, including long signal detection, Detection in place, the position detection limit, officers hit detection, emergency stop signal detection. If cars are running plate is not in place or vehicle length in excess of the permitted length of the garage, all vehicles disc will contain no action, If detected emergency stop signal to stop all action until the emergency stop signal disappeared. Above signals are hardware signals, in addition, the software can also be installed to control signal protection, such as the protection of the time, to ensure that the damage due to hardware failure to signal equipment and the main guarantee for the safety of vehicles.2.1.3 Remote diagnosis systemControllers can spot card, hubs and other network equipment and control center connected to the LAN, MODEN through remote management, monitoring the operation of the scene, when the scene failure, in the control center can be addressedto facilitate the management, e-office security personnel.2.1.4 Automatic GateIn the garage entrance of the no-contact reader, and the Gate of coil users in the garage entrances Swiping cards, the system automatically discriminates validity of the card, if valid, the Gate open automatically, through induction coils, Automatic self-closing fence; If invalid, the Gate is not open, and sound and light alarm.2.1.5 Monitoring security systemMonitoring security system is in the central control room for monitoring and controlling the operation of the garage scene conditions. It has motion detection, license plate recognition, network connections, different types of alarm systems linkage, and other functions, can be achieved unguarded.System catalog:Video monitoring function : the garage entrances, and the duty, the main segments within the garage installation focusing cameras, On the larger spaces installation spherical platforms, in order to achieve all-round garage on real-time monitoring. If the garage light conditions of the poor would use black-and-white cameras.Motion Detection functions: setting up the night in the garage of motion detection region, detecting when there are a moving target, Motion Detection and Alarm function remind staffs.LPR functions: it can set up the garage light vehicle license plates, vehicle. When the light vehicles entering the garage regional surveillance, the system automatically cross-referenced with images of a very odd situation, issued a warning signal and automatic switching and record their images.Alarm linkage functions: all can move even the police mainframe, if activated Relay acousto-optic warning issued notice of security personnel to voluntarily disarm Gate interception of vehicular access.Digital video functions : it with a continuous record of what happened in the garage, can be synchronized intervals over images arbitrary choice of the overall image to enlarge and local amplification, recording, playback, backup can beconducted all kinds of information.Reportedly, has begun an increasing number of residential quarters began to use a mechanical garage. Taking into account the cost and maintenance, the majority of the district is a multi-storey lifting and transferring parking equipment, mass storage mechanical garage also rarely. Lifting and transferring Garage Equipment parking flow indicate the following:1、The sense of light yellow instructions garage operationRed lamp was ongoing operating instructions, please wait; Green light is currently no operating instructions, can operate; yellow light instructions were to fail, the garage can not work.2、The operationDrivers of vehicles enter from the garage entrance. At the entrance of non-contact sensors Reader former regional shaken following their IC cards, induction process completed, the fence automatically rises driver drove into the garage. The fence shut down automatically after vehicles entering. Card is the controller to read spaces, corresponding to the parking garage containing cars moved to the site automatically transfer vehicle location, Automatic garage door open units. Car drivers entering and parking in place, Latin hand brake, alighted out of the garage, using IC cards in the garage exit Huang about IC cards Garage door modules to shut down automatically. Completed deposit truck operators.3、Collect the car operationDrivers entering the garage at the entrance to the non-contact sensors Reader former regional shaken following their IC cards Controller automatically read spaces, corresponding to the parking garage containing cars moved to the site automatically transfer vehicle location, Automatic garage door open modules, drivers entering the garage and drive out, in the garage exit of the automatic reader before induction regional dazzle your own IC cards, sensors finished, the reader receive information, Host controller automatically recorded, prepaid, automatically raising the fence, the driver drove the playing field, appeared after fencing to shut down automatically. Meanwhile, Controller automatically read spaces, corresponding to the garage doorunit shut down automatically. Vehicle operation finished.The garage has a complete self-protection device in the course of operation. A series of photoelectric switches, proximity switches, trip switches and other vehicles on site contains accurate operation in place to play a decisive role; falling unique defense installations, broken rope warning device, speeding vehicle protection device to protect the security role played. Detection of long vehicles, vehicle parking is not in place detection, and personnel into a detection signal of vehicles and the safety play a decisive role.翻译立体车库立体车库概述车辆无处停放的问题是城市的社会、经济、交通发展到一定程度产生的结果，立体停车设备的发展在国外，尤其在日本已有近30~40年的历史，无论在技术上还是在经验上均已获得了成功。

立体车库的英文文献(中英文一起)

Developing a Hybrid Programmable Logic Controller Platform fora Flexible Manufacturing SystemAbstract:In this article, we present the design and implementation of a flexible manufacturing system (FMS) control platform based on a programmable logic controller (PLC) and a personal computer (PC)-based visual man-machine interface (MMI) and data acquisition (DAS) unit. The key aspect of an FMS is its flexibility to adapt to changes in a demanding process operation. The PLC provides feasible solutions to FMS applications, using PC-based MMI/DAS, whereby PLCs are optimized for executing rapid sequential control strategies. PCs running MMI/DAS front-ends make intuitive operation interfaces, full of powerful graphics and reporting tools. Information from the PC c an be distributed through a company’s local area network or web using client-server technologies. Currently, with the convergence of underlying microprocessor technology and software program-ming techniques, many users find that PLCs provide a cost-effective solution to real-time control in small- to medium-sized process plants, especially when combined with supervisory PCs using hybrid systems. The major work of this article demonstrates that PLCs are responsive to rapid and repetitious control tasks, using PCs that present the flow of information automation and accept operator instructions, thereby providing the user a tool to modify and monitor the process as the requirements change.Key Words: PLC、FMS、PC.1．IntroductionIn a variety of product manufacturing industries, the most automated form of production is a Flexible manufacturing system(FMS),first introduced in 1970s. Since the FMSs can providea high potential for productivity improvement in batch manufacturing, the number of FMSs is growing substantially (Groover and Zimmers, 1984). The acceleration throughout the world is due to increased global competition, reduced manufacturing cycle times, and cuts in production costs.Generally, an FMS consists of a group of machines or other automated work stations, which form into modular subsystems, such as CNC machines, robots, vision systems, and a process station. These are interconnected by a materials handling system and usually driven by a computer(Maleki,1991).Each modular system requires an individual modular control system, with different components being controlled by individual controller units. All of the modular subsystems are controlled by computers as usual. These controllers perform their intended tasks under supervision of a higher level controller. To the system, both the control devices as well as the flow of information need to be automated. The key aspect of an FMS is its ability to adapt to changes in the control tasks. This flexibility includes the quantities and varieties of part types which it can produce, the order in which operations may be performed, and its ability to reroute parts back into flow paths. In the end, the control platform should have the capability to automate the flow of information.Typically, there are three types of control platforms used in FMSs: minicomputers, microcomputers, and PLCs (Maleki, 1991). The minicomputers are best suited for complex large-scale, continuous ,regulatory control applications . The PLCs are used for rapid and repetitious logic control. Personal computers (PCs) are suited for operator interface functions. Primarily, PLCs are designed to replace hardwiring relays, to operate in an industrial environment, to be easily modified by plant engineers and maintenance personnel, and to be maintained by plant electricians. Currently, with the convergence of underlying microprocessor technology and software programming, many users find that PLCs provide a cost-effective solution to real-time control in small-to medium-sizedprocess plants, especially when combined with supervisory PCs using hybrid systems.The purpose of this article is to address the state-of-the-art technology of FMSs. The design and construction of an FMS using PLC-controlled and PC-based visual man-machine interface(MMI) and data acquisition system(DAS) are presented. It is organized as follows. Section 2 begins with the description of the FMS on the factory floor of the Center for Manufacturing System sat the NewJersey Institute of Technology(NJIT).Section 3 shows the operational description of the FMS. Sections 4 and 5 present the applications of PLC-controlled and PC-based MMI/DAS for the FMS at NJIT. Section 6 contains a summary of the advantages of this PLC-controlled and PC-based MMI/DAS for FMS application.2. Description of the FMSSI handling conveyor systemThis consists of four carts, A, B, C, and D, with fixtures mounted on each, two transfer tables,TT1 and TT2 , and dual conveyors which transport materials to each workstation.Figure 1. Flexible manufacturing system.NASA II CNC milling machineThe milling machine accepts rectangular solid blanks and machines each part of different types according to its computer controller.GE P50 robotA shared robot is used to load and unload the material between the CNC milling machine and the conveyor system, and between the parts presentation station and conveyor system. It contains five computer programs assignable by the PLC. The computer programs direct the robot to load the material between the parts presentation station and the carts and between the CNC machine and the carts. The last two programs place the completed parts in the accept or reject area.Parts presentation stationThis station includes a gravity-chute, which supplies rectangular solid blanks as raw materials. This station also contains two bin types, one each for accepted parts and rejected parts.Computer vision systemThe vision system provides for the visual automated inspection of the parts. It is a menu-driven, 64-level gray scale, edge detection system.Drilling machineAn IBM7535 industrial robot with an automated drill as an end-effector drills various holes in the parts as directed.In summary, the FMS has two robots, one CNC mill, a material transfer convey or system including transportation carts and positioning limit switches, and a vision system, which are supervised by a GE-Series Six PLC and monitored by a PC-based visual MMI/DAS.3. Operational descriptionThe working cycle for this FMS proceeds in the following manner:1.Initially, all four carts on the conveyor system are empty and available for the raw materials to be loaded onto them from the parts presentation station.2.The GE robot loads four parts, one by one, on to the four carts on the convey or system. The carts move clock wise as they are being loaded.3. Figure 2 shows the positions acquired by the four carts once the four parts of different types have been loaded.4. The IBM robot drills various holes on each blank part as the cart stops at the drilling machine.5. The GE robot moves to the conveyor, removes the part from the cart at position X1,and loads it into the fixture located on the CNC machine table.6. Once the part is loaded on the CNC milling machine, the robot retracts, and the milling machine mills the rectangular part as required.7. After the milling operation, the robot arm moves to the milling machine to remove the part that was machined from the holding fixture.Figure 2. Loading state of the conveyor system.8. The robot returns the finished part to the same cart on the conveyor.9. A signal is sent to the vision camera to inspect the part.10. The vision system analyzes the part and outputs a signal that directs the robot to accept or reject the part.11. The robot runs either an accept program to place the part in the accept bin or runs a reject program to place the part in the reject bin.12. The GE robot goes to the parts presentation station and loads a new blank part into the cart.13. The cart is released to the system and the next cycle is started.4. Control of an FMS with a PLCThe significant features of the FMS control system are as follows:1.The system is easy to configure and to modify to accommodate changes and updates, because of the ladder logic capability of the system.2.In a similar manner, the system is easy to program and document.3.The system can be easily maintained, and troubleshooting is decreased because on-line diagnostics are provided to pinpoint problems and decrease maintenance.4.Naturally, the system is readily interfaced with the computer.The PLC is a general purpose industrial computer which is widely used in industrial process control. It is capable of storing instructions to implement control functions such as sequencing, timing, counting, arithmetic, data manipulation, and communication to control industrial machines and processes. The PLC is chosen to perform an FMS control task based on the following features:1) good reliability;2) less space required and operates in an industrial environment;3) easier to maintain by plant engineer or technician;4) can be reprogrammed if control requirements change;5) can communicate and network with other computers.In this application, a GE-Series Six PLC is equipped with a memory bank, and the I/O racks are loaded with the following input and output interfaces: 120 VAC input modules with 8 ports/module, 24 VDC input modules with 8 ports/module, and 120 VAC output modules with 8 ports/module.5. PC-based visual operator interface unitWith the convergence of microprocessor technology and software techniques, the PC has become very useful in operator interface applications. PCs running MMI/DAS front-ends make powerful, intuitive operation interfaces, full of useful graphics and reporting tools. Information from these PCs can be distributed through a company’s local area network(LAN) or web using client-server technologies.A PC-based visual MMI/DAS was developed to monitor the process and log data. The functions of the MMI are twofold. First, it opens a window between the operatorand the process and then displays the process information on the CRT. It also allows the operator to modify the time delay constants or alarm setpoints without changing the ladder logic, if the production requirements change. Second, it provides an automatic data logging device. It is capable of creating batch, shift, and day log reports. Information from the PC can be distributed through the local area network using client-server technologies. An application program has been developed by using an off-the-shelf state-of-the-art GENESIS for Windows PC-based software to provide the data from the PLC through a RS232 interface. This approach allows the PC to combine the controller, the programming terminal, the operator interface, and the data acquisition system together in one unit. The PC-based MMI/DAS software provides an icon-based and mouse-driven open system for designing a real-time control strategy and dynamic operator displays. With the open architecture features, it provides support for user algorithms and LAN interfacing.The other part of the MMI/DAS software is the enriched and user-friendly graphic builder. The graphic builder is an object-oriented CAD-based tool. The graphic tools allow the user to generate intuitive and useful man-machine interface screens to display the dynamic status of the FMS.6. ConclusionsThe particular FMS example is fully automated by a hybrid control platform using a PLC controlled and PC-based supervisory operator interface unit and data acquisition system. The trend of flexible manufacturing demands more open system control and flexibility with affordable cost. Obviously, the size and the nature of the application affect the decision. This PLC and PC hybrid supervisory control platform provides a cost-effective solution to real-time control and automation of the flow of information for small- to medium sized process plants. The system improvements are achieved in control system reliability, equipment maintainability, software maintainability, and system flexibility. The automated DAS system has the capability to generate batch, shift, and day logs reports, to report process and equipment alarms, and to refresh process data.为柔性制造系统设计的可编程控制器平台摘要：在本文中，我们给出了基于PLC和以可视的个人PC机为基础的MMI和DAS单元的柔性制造系统（FMS）控制平台的设计和运行。

立体车库外文翻译与原文

附件2：外文文献译文与原文专业班级：电气124 姓名：陈威驰学号：2012013850基于密码的旋转多层停车场系统作者：Nayab Suhail Hamirani, Imdad Ali Ismaili,Asad Ali Shaikh, Faheem Ahmed, Azhar Ali Shah摘要：在人口稠密地区和较大的城市，由于交通拥挤，停车成为了一个大问题。

使用旋转立体停车系统能够有效地减轻这个问题。

使用停车系统能够在更少的空间获得更安全的停车场。

为了降低成本并获得更小的空间和最佳的性能，我们使用ATMEL单片机作为主处理器，同时借助LCD和电机分别用于显示和旋转楼层。

密码锁定系统用来区分用户并检测停车场还剩下多少自由空间。

随着市场的全球化，汽车的数量也上升到了无法控制的局面。

设计这个系统模型的初衷就是为了解决这个问题，同时本项目中嵌入密码锁定系统也可以提高车辆停车的安全性。

关键词:基于密码的安全性；单片机；直流齿轮电机；普通IC；快速PCB1．引言本项目的目的是设计一种自动多层停车场系统，帮助普通民众将车停放在更小更安全的地方。

由于现代人口密集，以前的一些停车位被用作一些基础设施的建设，在大企业和公寓需要一个可以避免空间浪费的创新设计。

但是，这类项目的开发一直有个问题，虽然这些停车场是多层的，可是并不安全。

因此为了能够使用密码锁设备我们使用了微控制器，同时我们还使用了旋转楼层以保证最佳的设计。

本项目基于圆形建筑而不是正方形或长方形的建筑物，之所以这么选择是因为通过使用圆形建筑形状我们可以停放更多的车辆，但是使用其他形状的建筑物像正方形和矩形就很难这么做[1]。

在提案中，我们需要的器件包括两个电机，不同的操作开关，一个振荡器，一个按钮和液晶显示屏[6]。

2．项目研究现状在信息时代，我们可以看到人口已经增长到了一个不可控制的程度。

为了弥补这个问题我们设计了很多的大型项目。

但是很多项目都不安全，从人类的利益和缓解停车危机的角度出发我们设计了多层旋转停车场，这个设计可以有效的处理安全问题。

立体车库翻译及原文

毕业设计英文翻译原文学生姓名 *** 学号： ************** 所在学院：机械与动力工程学院专业：机械工程及自动化设计(论文)题目：立体停车库的三维建模指导教师： ***2010年 3 月 6 日HIGH-SECURITY, PAID, AUTOMATED SMART PARKING DESIGNSUMMARYAn original, futuristic, permission-based-access, automated, gated parking system design for a large office park is described. The proposed system uses WiFi cellular phones as the primary access technology, license plate recognition via image processing as the secondary technology, keypad entry as the third technology, and verbal interchange as the last resort. The office park encompasses 20,000 employees and has 132 access points to parking lots. The strict access policy creates a high security office park. Implementation cost is estimated at $5.9M. A $0.50 per day parking charge per car is proposed, generating $1.9M per year in offsetting revenue.INTRODUCTIONThis paper provides a smart parking system design :"concept of operations." While Palo Alto's Stanford Research Park (SRP) is the focus, components of this scheme may be applied to other large office parks. This design is intended to be a credible conceptual start that could serve as the basis for a detailed design and parking study.P ARKING D EMANDWillson’s studies of five suburban office parks found an average of 49 percent empty parking spaces at peak utilization. When the early research parks were built, land was inexpensive, so surface parking was preferred. Thus, there is a large opportunity to manage parking spaces more efficiently and make better use of the land.SRP weekday peak parking demand is calculated as 14,600 parking spaces. Currently, there is about 1 parking space per employee in the research park: 20,000 spaces in all. Thus, there are roughly 5,400 unused parking spaces representing roughly 44 acres of land (assuming 350 square feet per parking space).Normally, landowners prefer to hold some excess in parking, to ensure that there is sufficient parking should a building use change. For instance, changing a building use from software development to a call center results in more employees per leasable square foot, generating increased parking demand.In addition, landowners also like to provide a "cruising reserve:"“It is not practical to provide parking on the assumption that every space will be fully utilized. Some reserve capacity is needed to allow for cruising vehicles in search of a space, vehicles un-parking, and for peak surges. Thus, a design safety factor should be applied to account for these conditions. A design safety factor of 10 percent is suggested for most land uses.”OBJECTIVESLarge office parks usually lack accurate data on the number of cars that are parked at any point in time. Often a parking count study is conducted on an irregular basis. A modern parking system can easily provide an instantaneous count of the number of parked vehicles. This accurate quantification provides valuable information that can be used to justify land use changes.The sheer scale of SRP facilitates implementation of a state-of-the-art parking system. A phased, collaborative approach is advised.Converting from unrestricted parking to automated, gated operation is a significant task, requiring additional expenses that are avoided when building from scratch. Most SRP lots allow rapid, unconstrained access and egress; consequently, a reservoir of space to buffer human interaction with access gates is missing. In many of these lots, an average gate interaction time of three seconds would have the undesirable result of backing up traffic into street bike lanes during morning peak. Adding more gated lanes to solve queuing problems is an expensive option that is not explored further. For reference, free flowing access lanes serve 500 cars per hour, exit lanes serve 250-400 cars per hour. "In converting from unconstrained to gated, the concern is usually more with entering, rather than exiting, cars," points out a McGann Parking employee.P ARKING SYSTEM GOALS∙Driver-friendly transition from free to paid parking. Minimize irritation with gates.Manage access/egress queues so that traffic flows smoothly.∙Provide ability to escalate security during high terrorism threat∙Provide a system that not only works well for recurring parkers (employees), but also for the transient populations (customers and visitors). While high income, credit card-toting technology workers may be relatively easy to serve with advanced technology, ensure that non-English-speaking, cash-only contractors also have successful interactions.∙Enhance SRP security, while allowing individual companies the flexibility to "layer in"additional security measures.∙Successfully support the few high turnover sites within the greater research park such as the movie theatre, banks, and computer store.∙Minimize capital and operational costs.∙Minimize disruption during system installation – minimize asphalt and concrete projects that tie up lots.∙Operate lots without human attendants∙Operate most lots without parking enforcement –make it impossible to violate the parking rules.∙Allow the flexible sharing of parking lots between adjacent employers∙Follow an open systems approach with ability to enhance system capabilities. Avoid being locked into proprietary technology.Select technology that can also be used for employee ID badges / building access control.PARKING AUTOMATION TECHNOLOGYParking technology is undergoing a renaissance, thanks to new ITS (Intelligent Transportation Systems) technology. Each year performance is improving and price is dropping. New technologies are being validated as reliable, user-accepted, and cost-effective. The optimal SRP automation system will evolve as each year passes.No matter which automation technologies are deployed, one important system component is to rapidly identify either the vehicle or the driver. Once a unique identification number is known, then centralized control and billing can occur.T RANSPONDERSTransponders are now common in the Bay Area, used in the FasTrack electronic bridge toll collection system. One vendor provides credit card-sized, battery-free variants of the bridge toll transponders. These cost $22 apiece, read at slower speeds than 25 mph, and are well suited for parking lot operation.R ADIO F REQUENCY I DENTIFICATION (RF ID)RF-ID tags are small radio tags that may be attached to a vehicle. They operate in the same manner as cellular phone WiFi or Bluetooth identification. The current disadvantages of RF ID are cost, sensitivity to radio frequency interference, and possible confusion between two approaching vehicles. The emerging RF ID industry is working hard to address these disadvantages. The industry's stated objective is to lower the cost of RF ID to the point where individual clothing items may be tagged and tracked. Currently “passive tags,” tags without batteries, can be purchased for $2 in large volumes, and readers procured for $2,000 (plus mounting and power). Such passive tags may be read from a distance of 5 feet or less, so should be reliable in parking gate configurations. RF ID can offer accurate read reliability upwards of 99.7%.L ICENSE P LATE R ECOGNITION (LPR)LPR technology uses image processing to identify vehicles by their license plate numbers.A personal computer with a "frame grabber" card connects to video cameras focused on license plates. Once a video image is captured, algorithms detect the edges of the plate and then extract numbers and letters from within this area. In California, about ten percent of cars do not have front bumper plates, so LPR systems must scan rear bumpers. LPR systems often capture images and illuminate bumpers using the infrared spectrum, to prove high accuracy during night time and overcast conditions. Out-of-state and dirty plates tend to frustrate these systems. Formaintenance, video camera lenses require periodic cleaning.POLICY OPTIONSParking automation provides many possibilities to reward or penalize different behaviors. Automation also allows a high level of flexibility, where differing policies may be implemented at different parking lots and land uses. For instance, carpools and vanpools could receive preferential treatment. For instance, a TMA policy might provide carpools with free parking, waiving the $0.50 per day charge. For "tight-supply" applications, NextSpace could prioritize convenient spaces for carpools and employees, guiding solo drivers to less desirable lots.Likewise, the TMA could decide to discourage mid-day cold start trips (when the vehicle sits for more than one hour before being re-started) by directing the parking system to add charges for multiple exits per day. As yet another example, transient parkers could be granted ten free visits, after which $0.50 per day parking charges would apply.REFERENCES1)Richard Willson. Suburban parking economics and policy : case studies of officeworksites in Southern California. Washington, D.C. : Federal Transit Administration, University Research and Training Program.2).2002 Commute Profile. ./research/pdfs/commuteprofile_2002.pdf.3)ULI, Shared Parking.4)Parking Alternatives: Making Way for Urban Infill and Brownfield Redevelopment,/pdf/PRKGDE04.pdf.EPA document 231-K-99-001, Dec ’99.5)Robert A. Weant and Herbert S. Levinson. Parking. Westport, Conn. (P.O. Box 2055,Westport, 06880) : Eno Foundation for Transportation, c1990. xv, 335 p. : ill. ; 28 cm.6)Steve Raney, Suburban Silver Bullet: PRT Shuttle + Wireless Commute Assistant UsingCellular Location Tracking, TRB '04. Accepted for publication Transportation Research Record. /PRT_Wireless_TRB_111503_web.doc7)Transcore: /8)License Plate Recognition – A Tuturial, /.White paper by Yoram Hofman, Hi-Tech solutions, .9)Barcoding technology: /barcode.html,/barcode_decal_info.html, /products/AUTO/barauto.htm10)Dambach's individual parking space monitoring and guidance system:/single_space.htm. Directs cars to available parking spaces.11)Ryan Russo, Planning for Residential Parking: A Guide For Housing Developers andPlanners, by The Non-Profit Housing Association of Northern California./students/rrusso/parking/Developer%20Manual/index.htm . Richard Willson, Parking Management Toolkit: Strategies for Action in BART Station Areas. (Oct2000), And: Parking Policy Development Workbook, August ’99.高性能收费式自动化智能停车库设计摘要这里描述了一个为大型办公楼设计的具有独创性，前瞻性，和实用性的立体停车系统。

升降横移立体车库英文文献原文

Status of the development of solid garageStereo garage is the storage which is used for automatic parking and scientific storage of kinds of automobile. As the quantity of urban automobile has increased continuously in nowadays ,the hard-to-park problem has become a common phenomenon. Mechanical stereo garage can use land resource sufficiently and bring space advantage into play and maximize the number of parking cars. It has become an important way for static traffic problem of cities. The issue studies the type mechanical parking system which named up-down and translation stereo garage, and regards of the two factors of manufacture and operational efficiency synthetically.On the basis of investigation on current situation and developing trend of garage in domestic and abroad, we choose three-layer and three-formulistic garage structure as the research model. According to the form of the dragging-forms of multi player up-down and translation ear-base, it is made of three pares -part of ear-base structure part of driving-framework and part of control system. The paper simply introduces main structure and characteristics of garage and also gives a short introduction to its control system. The finite element reliability checking of steel structure of garage is utilized according to the operation principle of up-down and translation stereo garage, the mechanics was used to comprehensively analyze the up-down and translation stereo garage the mechanics was used to comprehensively analyze the up-down and translation stereo garage. Including intension of the framework structure axes etc. The paper adopted PLC as control system in designing the up-down and translation stereo garage, PLC software of OMRON company was used to weave the program of control system, through debugging running. The result proved that adopted PLC as control system is simple and easy to realize. The characteristic of stabilization ,credibility , speediness and high capability made the control system very perfection of mechanical parking systems-general safety requirement and the facts of the up-down and translation stereo garage the paper introduced some safety technique which was used in the up-down and translation stereo garage. This can ensure absolute safety for car and make the whole stereo garage safety and running smooth .On the base of the project "Optimal design of the mechanisms in the stereoscopic garage"，some mechanisms in the lift park garage has been designed optimally. At the first, we established the running mode and the structure of the mechanisms adapted to the running mode. And then, we chose the immobile comb as the parkingspace and the steel structure framework as support, the optimal design on the two mechanisms was carried through. The optimal design on the immobile comb and the steel structure framework was carried through with augmented multipliers method. At the end, the result of the optimal design is that the immobile comb will be more reasonable and decreased the whole weight of the garage and the load of the steel structure framework, and the weight of the steel structure framework become more light.With the rapid development of shanghai ,the settlement of the difficult of parking of shanghai has already reached the very urgent stage. In the city center where every inch of land is precious ,especially the area which such vehicles as the hotel ,market ,shopping center location ,etc. Dr.eye.concentrate ,can only develop to the sky ,to underground ,so has built and already to a great deal of three-dimensional garage parking reached the essential stage ,at the same time there are many advantages too in the three-dimensional garage parking.First ,economize the space. Generally speaking ,its floor space is about 1/2~1/25 of the level parking area ,machinery type "three-dimensional" .The garage can both be installed with ground underground ,the greatest advantage can fully utilize the small area to develop to the high altitude, try one's best to store more vehicles ,the place that the land resource in short supply ,the vehicle is big in capacity to park in the way best. For example ,are most suitable for using "vertical circulation" on the limited residential quarter ground on the space three-dimensional garage of the type. 8 storey s of every groups of this kind of garage ,that is to say ,only parked the three-dimensional garage built up on the area of a car and park 8 cars originally.Second ,automation is controlled ,easy to use. The three-dimensional automatic degree of garage parking is very high ,can hoist or lower the rotatory type ,for example ,district residents come off duty and park ,so long as according to the number that the brass-wind instrument is corresponding with the parking stall ,this parking stall will be rotated and landed to the ground ,after the car owner parks the good vehicle ,and then according to the number ,the parking stall circles round and rises ,restored to the throne again. From a complete set and install the intellectual administrative system of the parking area after installing the large-scale underground parking of the three-dimensional garage ,go on one on duty to manage hour through professional staff member of technical training.Third ,three-dimensional garage build cost lower than the traditional parking area greatly. It is reported, the occupation of land and building cost in the traditional parking area is quite high. Do not generally get on very well ,ordinary each occupation of land in the parking stall ,about 15 square meters ,the floors ,the floor space of each parking stall of underground parking is above 25 square meters at least on the ground. If use the three-dimensional garage parking, can park one group and 8 parking stalls of three-dimensional garage parking on the vacant lot of 30 square meters ,the average floor space of each parking stall is less than 4 square meters. In respect to building cost ,the house property developer of the district builds an underground parking stall to need to invest 60,000-80,000 yuan at present ,the construction cost of some top-grade underground parking stalls of office building is up to more than ten ten thousand yuan especially. If install the three-dimensional garage ,is it increase parking stall is can cost stand thin to reach 50,000-60,000 yuan each construction of parking stall to try one's best in a situation that the area of space does not change.Fourth, it is safe and reliable and beautifying the environment. Allocate the automatic detection system, various kings of sage organizations, autoalarm , fire-fighting system and other stick precautions facility. The automobile will not damage , loses. Suit measures to local conditions, utilize fragmentary vacant lot , shape beautiful garage beyond mix ,beautify the urban environment.。

毕业设计(论文)-机械式立体车库设计

2011届学生毕业论文（设计）存档编号：__________毕业论文论文题目：机械式立体车库【英文】：Stereo garage系部：机电与建筑工程学部专业：机械设计制造及其自动化姓名：学号：指导老师：2011年 5 月 3 日摘要立体车库是专门实现各种车辆的自动停放及科学寄存的仓储设施。

随着城市汽车保有量的不断增加，停车难问题己经成为大中型城市的一个普遍现象。

机械式立体车库可充分利用上地资源，发挥空间优势，最大限度地停放车辆，成为解决城市静态交通问题的重要途径。

但是由于场地有限，将车库架在路面将能充分利用土地资源，以六车道作为选择，以两层循环式立体车库为研究对象，综合考虑立体车库制造成本和运行效率的双重因素。

本文在对国内外车库现状及发展趋势做了充分调研的基础上，选择两层循环式立体车库结构为研究模型。

两层循环式立体车库就其组成部分而言，可分为三大部分：车库结构部分、传动机构部分和控制系统部分。

本文简单介绍了车库的主体结构和特点，对车库的控制系统也作了简单的说明，依据两层循环式立体车库的运行原理，运用力学理论对车库的结构进行了全面的力学分析，包括车库的框架结构的强度和升降传动系统中轴的强度等。

在对车库控制系统的设计中，采用了先进的PLC控制，运用欧姆龙公司的编程软件编制了升降横移式立体车库控制系统的程序，并经调试、运行，证明采用可编程序控制器(PLC)作为控制系统简单易行。

其稳定、可靠、快速、性价比高的特点使得控制系统非常完美。

为了使停车设备满足使用要求，根据国家关于机械式停车设备通用安全要求的标准、两层循环式立体车库的实际，在车库中使用了一些必要的安全技术，这样保证了车辆的绝对安全，使得整个车库可以安全平稳的运行。

关键词：立体车库，六车道，控制系统，可编程序控制器，钢结构。

Abstract：Stereo garage is the storage which is used for automatic parking and scientific storage of kinds of automobile. As the quantity of urban automobile has increased continuously in nowadays, the hard-to-Park Problem has become a common phenomenon. Mechanical stereo garage can use land resource sufficiently and bring space advantage into play, and maximize the number of parking cars. It has become an important way for static traffic problem of cities. But as to the limits of space , I would build the stereo garage above the surface of the road with six lanes in two directions .the subject of research is circulation Stereo garage in two layers and regards of the two factors of cost of manufacture and operational efficiency synthetically.On the basis of investigation on current situation and developing trend of garage in domestic and abroad, we choose two-layer garage structure as the research model. According to the form of the Stereo garage, it is made of three parts: part of ear-base structure、part of driving-framework and part of control system. The paper simply introduces main structure and characteristics of garage and also gives a short introduction to its control system. The finite element reliability checking of steel structure of garage is utilized according to the operation principle of circulation Stereo garage in two layers, the mechanics was used to comprehensively analyze the up-down and translation stereo garage. Including intension of the framework structure and axes, etc. The paper adopted PLC as control system in designing the up-down and translation stereo garage, PLC software of OMRON company was used to weave the program of control system, through debugging running. The result proved that adopted PLC as control system is simple and easy to realize. The characteristic of stabilization, credibility, speediness and high capability made the control system very perfection. In order to satisfy using demand in design stereo garage, according to criterion of mechanical parking systems-general safety requirement and the facts of the stereo garage the Paper introduced some safety technique which was used in the up-down and translation stereo garage. This can ensure absolute safety for Car and make the whole stereo garage safety and running smooth.Keywords：Stereo garage, six lanes road, Control system, PLC, Steel structure .目录第一章绪论 ..................... 错误!未定义书签。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

中国地质大学长城学院本科毕业设计外文资料翻译系别：工程技术系专业：机械设计制造及其自动化姓名：裴吉星学号： 052116292015年 4 月 6 日外文原文The Stereo Garagege1.1An overview of the stereo garageVehicles parked nowhere is the problem of the urban social,economic and transport development to a certain extent the result,Garage Equipment development in foreign counties,especially in Japan nearly 30-40 years.Whether technically or in terms of experience had been a success.China is also in the beginning of tht 1990s developed mechanical parking equipment,which was 10years in the past.Because a lot of new residentd in the district with the ratio of 1:1.To address the size of parking spaces for tenants and business areas contradictions 3D mechanical parking equipment with an average size of a small motorcycle’s unique characheristics,the majority of users have been accepted.Compared with the traditional natural underground garage,Machinery garage demonstrates its superiority in many respects.First,the mechanical garage must elapse enough lanes,the average car will occupy an area of 40 square meters,If the use of double-mechanical garage,which would enable ground to improve the utilization rate of around 80% to 90%,If using ground multi-storey(21 storey),three-dimensional garage,50 square meters of land area will be placed on the 40cars,which can greatly save the limited land resources,Civil and save demelopment costs. To underground garage,Mechanical garage can be more effective to ensure personal and vehicle safety in the garage or car kept prospective location,the entire electronic control equipment would not operate.It should be said that the mechanical garage from the management can do a thorough separation of people and vehicles.In the underground garage using mechanical parking,it also can remove the heating ventilation;therefore,Operation of the power consumption than workers in the management of underground garage is much lower.Mechanical garage don’t usually do complete system,but as a single machine containers.This will give full play to its small space,the adwantages of decentralized,Each of the residential areas or groups downstairs to make a complete circuit can be set up random mechanical parking building.This garage of the district can solve the shortage of parking difficulty in providing convenient conditions right now.Currently,three-dimensional garage mainly in the following forms:lifting and transferring,aisle stacking garage,vertical garage,vertical cycle,box-level cycle,the level of circulating round.1.1.1Lifting and transferringLifting and transferring Garage modular design,each module can be designed into two,three,four levels,the five-story,swmi-submerged in various forms,such as the number of parking spaces from a few to hundreds.Three-dimensional garage applies to the ground and underground car parks,configuration flexibility and cost is low.1.Product fratures:⑴Save land,the configuration flexibility,and shorter construction period.⑵Low prices,firefighting and exterior decoration,with a total investment on smallfoundations.⑶Use automatic control,simple structure,safe and reliable.⑷Access to a quick,short waiting time.⑸Run a smooth,low noise⑹Applies to commercial,offices,and residential quarters supporting the use of car parks.2.Safety devices:anti-dropping device,a photoelectric sensor,spacing protectors, Emergency stop switch.1.1.2Aisle stacking garageAisle stacking garage used as a stacking machine tool access vehicles.All vehicles are stacking machine access,so the techinal requirements for stacker higher,a single stacker cost is higher.So aisle stacking apply to the parking garage need a few more customers.1.1.3Vertical GarageVertical Garage Elevator similar to the principle that both sides of the hoist layout spaces.Generally need a ground vehicle rotary tables can be saved by the driver away.Vertical Garage generally higher high(tens of meters),safety equipment, Installation precision machining requirements are very high,high cost,but has the smallest area.1.1.4Vertical cycleProduct features:⑴cover an area of small;two berths area can stop 6-10 vehicles.⑵The decoration can be added only roof,fire hydrants available.⑶Low prices,foundation.external decoration,fire and other small investmentmshort construction periods.⑷Use automatic control,safe and reliable operation.2.1The stereo garage automatic control systemThe modern large-scale building mainstream is intelligent mansion and community.So,automated parking equipment or garage automatic control system will become intelligent mansion and an important part of community.Simple,fast,easy to use,safe,reliable.and less maintenance,to provide users with a safe,easy to use equipment operating conditions , vehicles parked in time , vehicle storage Malaysia,Garage storage capacity.Vehicles kept high and low peaks,and other information can be transmitted through the network of intelligent control center through intelligent control center operator,and the broadcasting system and the management office of the Division linked related to early release control, management information,thus achieving all the intelligent management.Buliding and the Community through the intelligent control of the center could also associate with social nerworking functions.Information released to the collection coming out or expands utilization of the garage social and economic benefits.This will be the automation of the development direction of the garage.Solid Garage automation control system include the following five major subsystems:automatic toll collection management system automatic access systems for remote diagnosis system,automatic gate,control security system.Subsystems are more unified control of the central control room,for customers planning Garage form of management,Published garage inventory capacity,traffic control program.2.1The stereo garage automatic control systemThe modern large-scale building mainstream is intelligent mansion and community.So,automated parking equipment or garage automatic control system will become intelligentmansion and an important part of community.Simple,fast,easy to use,safe,reliable,and less maintenance,to provide users with a safe,easy to use environment operating conditions,vehicles parked in time,vehicle storage Malaysia,garage storage capacity.Vehicles kept high and low peaks,and other information can be transmitted through the network of intelligent control center through intelligent control center operator,and the broadcasting system and the management office of the Division linked related to early release control,management information,thus achieving all the intelligent management.Buliding and the Community through the intelligent control of the center could also associate with networking rmation released to the collection coming out or expands utilization of the parage social and economic benefits.This will be the automation of the development direction of the garage.Solid Garage automation control system include the following five major subsystems:automatic toll collection management system automatic access systems for remote diagnosis system,automatic Gate,control security system.Subsystems are more unified control of the central control room,for customers planning Garage form of management,Published garage inventory capacity,traffic control program.2.1.1Automatic Toll Management SystemAutomatic charge adopts contactless IC card.IC card points long-term card and the stored-card.For fixed users,the issue of long-term cards,the cost of fixed users pays management fees paid together;on the temporary users,issue stored-value cards,namely:the user fees paid cards exist within each parking card reader automatically deducted from the cost.2.1.2Automatic vehicle access systemAutomatic vehicle access system is generally controlled by small PLC.Including the identification card number and mobile disc contains two cars ers enter the garage at the entrance to Swiping cards,reader data automatically transmitted to the PLC control system,PLC system through the judgment card number and automatically set the corresponding site mobile trucks and vehicles to the handover location,the garage door opened,shorten the time access to cars.Truck drivers light singles in accordance with be normal light-Kai.Access car after thr completion of the garage doors shut down automatically.Mobile site contains car,the system in strict accordance with the various signal detection mobile state,including long signal detection,Detection in place,the position detection limit,officers hit detection, emergency stop signal detection.If cars are running plate is not in place or vehicle length in excess of the permitted length of the garage,all vehicles disc will contain no ancion.If detected emergency stop signal to stop all action until the emergency stop signal disappeared.Above,signals are hardware signals,in addition,the software can also be installed to control signal protection,such as the protection of the time,to ensure that the damage due to hardware failure to singal equipment and the main guarantee for the safety of vehicles.2.1.3Remote diagnosis systemControllers can spot card, hubs and other network equipment and control center connected to the LAN,MODEN through remote management,monitoring the operation of the scane,when the scene failure, in the control center can be addressed to facilitate the management,e-office secutity personnel.2.1.4Automatic GateIn the garage entrance of the no-contact reader,and the Gate of coil users in the garage entrances Swiping cards,the system automatically discriminates validity of the card,if valid,the Gate open automatically,through induction coils,Automatic self-closing fence;If invalid,the Gate is not open,sound and alarm.2,1,5Monitoring security systemMonitoring security system is in the central control room for monitoring and controlling the operation of the garage scene conditions.It has motion detection,licence plate recognition,network connections,different types of alarm systems linkage,and other functions,can be achieved unguarded.System catalog:Video monitoring function:the garage entrances,and the duty,the main segments within the garage installation focusing cameras.On the larger spaces installation spherical platforms,in order toachieve all-round garage on real-time monitoring.If the garage light conditions of the poor would use black-and-white cameras.Motion Detection functions:setting up the night in the garage of motion diction retion,detecting when there a moving target,Motion Detection and Alarm function remind staffs. LPR functions:it can set up the garage lighr vehicle license plates,vehicle.When the light vehicles entering the garage regional surveillance,the system automatically cross-referenced with images of a very odd situation,issued awarning signal and automatic switching and record their images.Alarm linkage function:all can move even the police mainframe,if activated Relay acousto-optic warning issued notice of security personnel to voluntarily disarm Gate interception of vehicular access.Digital video functions:it with a continuous record of what happened in the garage, can be synchronized intervals over images arbitrary choice of the overall image to enlarge and local amplification,recording,playback,backup can be conducted all kinds of information. Reportedly,has begun an increasing number of residential quarters began to use a mechanical garage.Taking into account the cost and maintenance,the majority of the district is a multi-storey lifting and transferring parking equipment,mass storage mechanical garage also rarely.Lifting and transferring Garage Equipment parking flow indicate the following:1、The sense of light yellow instructions garage operationRed lamp was ongoing operating instructions,please wait;Green light is currentlyno operating instructions,can operate;yellow light instructions were to fail,the garage cannot work.2、The operationDriver of vehicles enter from the garage entrance.At the entrance of non-contact sensors Reader former regional shaken following their IC cards,induction process completed,the fence automatically rises driver drove into the garage.The fence shut down automatically after vehicles entering.Card is the controller to read spaces,corresponding to the parking garage containing cars moved to the site automatically transfer vehicle location,Automatic garage door open units.Car drivers entering and parking in place,Latin hand brake,alighted out of the garage,using IC cards in the garage exit Huang about IC cards Garage door modules to shut down pleted deposit truck operators.3、Collect the car operationDriver entering the garage at the entrance to the non-contact secsors Reader formor regionalshaken following their IC cards Controller automatically read spaces,corresponding to the parking garage containing cars moved to the site qautomatically transfer vehicle location,Automatic garage door open modules,drivers entering the garage and drive out,in the garage exit of the automatic reader receive information,Host controller cutomatically recorded,prepaid,automatically raising the fence,the driver drove the playing field,appeared after fencing to shut down automatically.Meanwhile,Controller automatically read spaces,corresponding to the garage door unit shut down automatically.Vehicle operation finished. The garage has a complete self-protection device in the course of operation.A series of photoelectric switches,proximity switches,trip switches and other vehicles on site contains accurate operation in place to play a decisive role;falling unique defense installations,broken rope warning device,speeding vehicle protection device to protect the security role played.Detection of long vehicles,vehicle parking is not in place detection,and personnel into a detection signal of vehicles and the safety play a decisive role.翻译立体车库1.1立体车库概述车辆无处停放的问题是城市的社会、经济、交通发展到一定程度产生的结果，立体停车设备的发展在国外，尤其在日本已有近30-40年的历史，无论在技术上还是在经验上均已获得了成功。