LTE题库3万题

以下说法正确的是：_______。 | Which statements are RIGHT? ____________
3,4
LTE系统内的切换失败，意味着________. | Handover to E-UTRA failure means _________.
1,3
以下哪些定时器与LTE系统的切换有关？______ | ______. | Which timers are related to LTE Handover? ______
1
关于CIO（cellIndividualOffset），以下哪组参数的选择，更有利于解决A3切换的拐角效
应问题？ | About cellIndividualOffset (CIO), Which configuration can improve
3
the Event-A3 handover performance at the street corner.
3
LTE FDD中，A5事件是指________。 | For LTE FDD system, Event A5 means ________.
4
LTE FDD中，A4事件是指________。 | For LTE FDD system, Event A4 means ________.
2
LTE FDD中，B1事件是指________。 | For LTE FDD system, Event B1 means ________.
4
根据协议，计数器N310的默认值为______。 | According to Technical Specification, the default value of N310 is _______.
1
根据协议，计数器N311的默认值为______。 | According to Technical Specification, the default value of N311 is _______.
2,3
关于OMC中批量导入邻区的操作，以下说法正确的是________. | About the OMC function of batch importing Neighbor cells, which statements are RIGHT? __________
如果只配置3个同属一个eNB的小区的邻区，在目前的OMC版本下，使用哪种方法最快？
________ | If only 3 neighbor cells from the same eNB need to be configured,
2
for the current OMC version, by which way can we finish this job in shortest
1
在A3事件中，要加快服务小区向目标小区切换，以下说法正确的是：_______。 | In Event
A3, to facilitate the handover from serving cell to neighbor cell, which
3
statement is RIGHT? ____________
2
关于OMC中X2和S1口的配置，以下说法正确的是________. | About the configuration of S1 and X2 interface in OMC, which statement is RIGHT? ________
1
LTE系统内的切换，通常在________（时间）内完成。 | Intra E-UTRA handover usually can be done in ________.
1
在V2.0的LTE FDD OMC系统中，使用邻区配置工具"Neigbhour Cell Management"配置邻区
时，打开该工具只需要花费大约多长时间？__________ | For the LTE FDD OMC V2.0 system, it'll take __________ to open the window of the neighbour cell relation
T304定时器在_______的时候启动。 | T304 starts at the moment of ________.
1
T304定时器在_______条件下停止。 | T304 stops while ________.
2
T310定时器在______的时候启动。 | T310 starts at the moment of ________.
shaodeng
1
重配置完成消息是由（1）_____发给（2）_______的。 | RRCConnectionReconfigurationComplete Message is sent to (2)________ by
2
当UE发现需要发起切换时，向eNB发起_______消息、将“切换请求”信息传递给eNB。 | UE will send a _______ message to eNB to imply the information of handover
2
LTE系统内的切换完成，通常是以_________信令作为标志的。 | _______________ message is the mark of a successful handover.
1
根据协议，T304定时器可以取值为_______。 | According to the Technical Specification, the value of T304 could be _______.
在A5事件中，要加快服务小区向目标小区切换，以下说法正确的是：_______。 | In Event
A5, to facilitate the handover from serving cell to neighbor cell, which
2
statement is RIGHT? ____________
1
目前版本的OMC，每个eNB可以配置最多________条X2口数据。 | In the current version of OMC, for an eNB, the maximum number of X2 association could be coinfigued is
2
当前的版本，当eNB同时配置了S1口和X2口，________口切换。 | If both S1 and X2 association are configued for an eNB, _________..
如果配置300个小区的邻区，在目前的OMC版本下，使用哪种方法最快？________ | If 300
neighbor cells need to be configured, for the current OMC version, by which way
3
can we finish this job in shortest time? _____
2,4
在LTE FDD的测量报告消息中，可以上报_______个小区的测量结果。 | The number of reported cells in Measurement Report may be ______.
1,2
以下说法正确的是：_______。 | Which statements are RIGHT? ____________
2
在测量报告消息中上报的RSRP测量结果，其取值范围为_______。 | The range of RSRPresult in MeasurementReport is _________.
4
在测量报告消息中上报的RSRQ测量结果，其取值范围为_______。 | The range of RSRQresult in MeasurementReport is _________.
Leabharlann Baidu
OMC中批量导入邻区数据的功能，入口菜单为_________. | To use the batch neighbors configuration funciton, we can click the menu named _____ in OMC.
2
邻区配置工具的入口菜单为_________. | To use the neighbor relation configuration tool, we can click the menu named _____ in OMC.
2
根据协议，T310定时器的默认值为_______。 | According to the Techincal Specification, the default value of T310 is __________.
4
根据协议，T311定时器的默认值为______。 | According to the Technical Specification, the default value of T311 is ______.
在A5事件中，要加快服务小区向目标小区切换，以下说法正确的是：_______。 | In Event
A5, to facilitate the handover from serving cell to neighbor cell, which
1,4
statements are RIGHT? ____________
4
LTE FDD中，A1事件是指________。 | For LTE FDD system, Event A1 means ________.
1
LTE FDD中，A2事件是指________。 | For LTE FDD system, Event A2 means ________.
2
LTE FDD中，A3事件是指________。 | For LTE FDD system, Event A3 means ________.
4
configuration tool (Neighbour Cell Management).
在测量报告消息中，最多可以上报_______个小区的测量结果。 | The maximum number of reported cells in Measurement Report is ______.
2,4
在A3事件中，要加快服务小区向目标小区切换，以下说法正确的是：_______。 | In Event
A3, to facilitate the handover from serving cell to neighbor cell, which
2,3
statements are RIGHT? ____________
1
在测量报告消息中上报的RSRQresult = 3，表明RSRQ的实际值范围为_______。 | The RSRQresult in MeasurementReport equals to 3 which means _________.
2
在测量报告消息中上报的RSRPresult = 95，表明RSRP的实际值范围为_______。 | The RSRPresult in MeasurementReport equals to 95 whichi means _________.
1,2,4
根据协议，T310时器可以取值为_______。 | According to the Technical Specification, the value of T310 could be _______.
1,2,3
根据协议，T311时器可以取值为_______。 | According to the Technical Specification, the value of T310 could be _______.
2
LTE FDD中，B2事件是指________。 | For LTE FDD system, Event B2 means ________.
4
下列哪个定时器超时意味着LTE FDD中的切换失败？ | Which of the following Timers expriry means the handover to E-UTRA failure?